1 files changed, 288 insertions, 0 deletions
diff --git a/arch/mips/netlogic/xlp/usb-init-xlp2.c b/arch/mips/netlogic/xlp/usb-init-xlp2.c
new file mode 100644
index 000000000..2524939a5
--- /dev/null
+++ b/arch/mips/netlogic/xlp/usb-init-xlp2.c
@@ -0,0 +1,288 @@
+/*
+ * Copyright (c) 2003-2013 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+
+#define XLPII_USB3_CTL_0		0xc0
+#define XLPII_VAUXRST			BIT(0)
+#define XLPII_VCCRST			BIT(1)
+#define XLPII_NUM2PORT			9
+#define XLPII_NUM3PORT			13
+#define XLPII_RTUNEREQ			BIT(20)
+#define XLPII_MS_CSYSREQ		BIT(21)
+#define XLPII_XS_CSYSREQ		BIT(22)
+#define XLPII_RETENABLEN		BIT(23)
+#define XLPII_TX2RX			BIT(24)
+#define XLPII_XHCIREV			BIT(25)
+#define XLPII_ECCDIS			BIT(26)
+
+#define XLPII_USB3_INT_REG		0xc2
+#define XLPII_USB3_INT_MASK		0xc3
+
+#define XLPII_USB_PHY_TEST		0xc6
+#define XLPII_PRESET			BIT(0)
+#define XLPII_ATERESET			BIT(1)
+#define XLPII_LOOPEN			BIT(2)
+#define XLPII_TESTPDHSP			BIT(3)
+#define XLPII_TESTPDSSP			BIT(4)
+#define XLPII_TESTBURNIN		BIT(5)
+
+#define XLPII_USB_PHY_LOS_LV		0xc9
+#define XLPII_LOSLEV			0
+#define XLPII_LOSBIAS			5
+#define XLPII_SQRXTX			8
+#define XLPII_TXBOOST			11
+#define XLPII_RSLKSEL			16
+#define XLPII_FSEL			20
+
+#define XLPII_USB_RFCLK_REG		0xcc
+#define XLPII_VVLD			30
+
+#define nlm_read_usb_reg(b, r)		nlm_read_reg(b, r)
+#define nlm_write_usb_reg(b, r, v)	nlm_write_reg(b, r, v)
+
+#define nlm_xlpii_get_usb_pcibase(node, inst)			\
+			nlm_pcicfg_base(cpu_is_xlp9xx() ?	\
+			XLP9XX_IO_USB_OFFSET(node, inst) :	\
+			XLP2XX_IO_USB_OFFSET(node, inst))
+#define nlm_xlpii_get_usb_regbase(node, inst)		\
+	(nlm_xlpii_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
+
+static void xlp2xx_usb_ack(struct irq_data *data)
+{
+	u64 port_addr;
+
+	switch (data->irq) {
+	case PIC_2XX_XHCI_0_IRQ:
+		port_addr = nlm_xlpii_get_usb_regbase(0, 1);
+		break;
+	case PIC_2XX_XHCI_1_IRQ:
+		port_addr = nlm_xlpii_get_usb_regbase(0, 2);
+		break;
+	case PIC_2XX_XHCI_2_IRQ:
+		port_addr = nlm_xlpii_get_usb_regbase(0, 3);
+		break;
+	default:
+		pr_err("No matching USB irq!\n");
+		return;
+	}
+	nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
+}
+
+static void xlp9xx_usb_ack(struct irq_data *data)
+{
+	u64 port_addr;
+	int node, irq;
+
+	/* Find the node and irq on the node */
+	irq = data->irq % NLM_IRQS_PER_NODE;
+	node = data->irq / NLM_IRQS_PER_NODE;
+
+	switch (irq) {
+	case PIC_9XX_XHCI_0_IRQ:
+		port_addr = nlm_xlpii_get_usb_regbase(node, 1);
+		break;
+	case PIC_9XX_XHCI_1_IRQ:
+		port_addr = nlm_xlpii_get_usb_regbase(node, 2);
+		break;
+	case PIC_9XX_XHCI_2_IRQ:
+		port_addr = nlm_xlpii_get_usb_regbase(node, 3);
+		break;
+	default:
+		pr_err("No matching USB irq %d node  %d!\n", irq, node);
+		return;
+	}
+	nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
+}
+
+static void nlm_xlpii_usb_hw_reset(int node, int port)
+{
+	u64 port_addr, xhci_base, pci_base;
+	void __iomem *corebase;
+	u32 val;
+
+	port_addr = nlm_xlpii_get_usb_regbase(node, port);
+
+	/* Set frequency */
+	val = nlm_read_usb_reg(port_addr, XLPII_USB_PHY_LOS_LV);
+	val &= ~(0x3f << XLPII_FSEL);
+	val |= (0x27 << XLPII_FSEL);
+	nlm_write_usb_reg(port_addr, XLPII_USB_PHY_LOS_LV, val);
+
+	val = nlm_read_usb_reg(port_addr, XLPII_USB_RFCLK_REG);
+	val |= (1 << XLPII_VVLD);
+	nlm_write_usb_reg(port_addr, XLPII_USB_RFCLK_REG, val);
+
+	/* PHY reset */
+	val = nlm_read_usb_reg(port_addr, XLPII_USB_PHY_TEST);
+	val &= (XLPII_ATERESET | XLPII_LOOPEN | XLPII_TESTPDHSP
+		| XLPII_TESTPDSSP | XLPII_TESTBURNIN);
+	nlm_write_usb_reg(port_addr, XLPII_USB_PHY_TEST, val);
+
+	/* Setup control register */
+	val =  XLPII_VAUXRST | XLPII_VCCRST | (1 << XLPII_NUM2PORT)
+		| (1 << XLPII_NUM3PORT) | XLPII_MS_CSYSREQ | XLPII_XS_CSYSREQ
+		| XLPII_RETENABLEN | XLPII_XHCIREV;
+	nlm_write_usb_reg(port_addr, XLPII_USB3_CTL_0, val);
+
+	/* Enable interrupts */
+	nlm_write_usb_reg(port_addr, XLPII_USB3_INT_MASK, 0x00000001);
+
+	/* Clear all interrupts */
+	nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
+
+	udelay(2000);
+
+	/* XHCI configuration at PCI mem */
+	pci_base = nlm_xlpii_get_usb_pcibase(node, port);
+	xhci_base = nlm_read_usb_reg(pci_base, 0x4) & ~0xf;
+	corebase = ioremap(xhci_base, 0x10000);
+	if (!corebase)
+		return;
+
+	writel(0x240002, corebase + 0xc2c0);
+	/* GCTL 0xc110 */
+	val = readl(corebase + 0xc110);
+	val &= ~(0x3 << 12);
+	val |= (1 << 12);
+	writel(val, corebase + 0xc110);
+	udelay(100);
+
+	/* PHYCFG 0xc200 */
+	val = readl(corebase + 0xc200);
+	val &= ~(1 << 6);
+	writel(val, corebase + 0xc200);
+	udelay(100);
+
+	/* PIPECTL 0xc2c0 */
+	val = readl(corebase + 0xc2c0);
+	val &= ~(1 << 17);
+	writel(val, corebase + 0xc2c0);
+
+	iounmap(corebase);
+}
+
+static int __init nlm_platform_xlpii_usb_init(void)
+{
+	int node;
+
+	if (!cpu_is_xlpii())
+		return 0;
+
+	if (!cpu_is_xlp9xx()) {
+		/* XLP 2XX single node */
+		pr_info("Initializing 2XX USB Interface\n");
+		nlm_xlpii_usb_hw_reset(0, 1);
+		nlm_xlpii_usb_hw_reset(0, 2);
+		nlm_xlpii_usb_hw_reset(0, 3);
+		nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_0_IRQ, xlp2xx_usb_ack);
+		nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_1_IRQ, xlp2xx_usb_ack);
+		nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_2_IRQ, xlp2xx_usb_ack);
+		return 0;
+	}
+
+	/* XLP 9XX, multi-node */
+	pr_info("Initializing 9XX/5XX USB Interface\n");
+	for (node = 0; node < NLM_NR_NODES; node++) {
+		if (!nlm_node_present(node))
+			continue;
+		nlm_xlpii_usb_hw_reset(node, 1);
+		nlm_xlpii_usb_hw_reset(node, 2);
+		nlm_xlpii_usb_hw_reset(node, 3);
+		nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_0_IRQ, xlp9xx_usb_ack);
+		nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_1_IRQ, xlp9xx_usb_ack);
+		nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_2_IRQ, xlp9xx_usb_ack);
+	}
+	return 0;
+}
+
+arch_initcall(nlm_platform_xlpii_usb_init);
+
+static u64 xlp_usb_dmamask = ~(u32)0;
+
+/* Fixup the IRQ for USB devices which is exist on XLP9XX SOC PCIE bus */
+static void nlm_xlp9xx_usb_fixup_final(struct pci_dev *dev)
+{
+	int node;
+
+	node = xlp_socdev_to_node(dev);
+	dev->dev.dma_mask		= &xlp_usb_dmamask;
+	dev->dev.coherent_dma_mask	= DMA_BIT_MASK(32);
+	switch (dev->devfn) {
+	case 0x21:
+		dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_0_IRQ);
+		break;
+	case 0x22:
+		dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_1_IRQ);
+		break;
+	case 0x23:
+		dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_2_IRQ);
+		break;
+	}
+}
+
+/* Fixup the IRQ for USB devices which is exist on XLP2XX SOC PCIE bus */
+static void nlm_xlp2xx_usb_fixup_final(struct pci_dev *dev)
+{
+	dev->dev.dma_mask		= &xlp_usb_dmamask;
+	dev->dev.coherent_dma_mask	= DMA_BIT_MASK(32);
+	switch (dev->devfn) {
+	case 0x21:
+		dev->irq = PIC_2XX_XHCI_0_IRQ;
+		break;
+	case 0x22:
+		dev->irq = PIC_2XX_XHCI_1_IRQ;
+		break;
+	case 0x23:
+		dev->irq = PIC_2XX_XHCI_2_IRQ;
+		break;
+	}
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_XHCI,
+		nlm_xlp9xx_usb_fixup_final);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_XHCI,
+		nlm_xlp2xx_usb_fixup_final);