diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/mips/netlogic/xlp/usb-init.c | 149 |
1 files changed, 149 insertions, 0 deletions
diff --git a/arch/mips/netlogic/xlp/usb-init.c b/arch/mips/netlogic/xlp/usb-init.c new file mode 100644 index 000000000..f8117985f --- /dev/null +++ b/arch/mips/netlogic/xlp/usb-init.c @@ -0,0 +1,149 @@ +/* + * Copyright (c) 2003-2012 Broadcom Corporation + * All Rights Reserved + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the Broadcom + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/platform_device.h> + +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> + +/* + * USB glue logic registers, used only during initialization + */ +#define USB_CTL_0 0x01 +#define USB_PHY_0 0x0A +#define USB_PHY_RESET 0x01 +#define USB_PHY_PORT_RESET_0 0x10 +#define USB_PHY_PORT_RESET_1 0x20 +#define USB_CONTROLLER_RESET 0x01 +#define USB_INT_STATUS 0x0E +#define USB_INT_EN 0x0F +#define USB_PHY_INTERRUPT_EN 0x01 +#define USB_OHCI_INTERRUPT_EN 0x02 +#define USB_OHCI_INTERRUPT1_EN 0x04 +#define USB_OHCI_INTERRUPT2_EN 0x08 +#define USB_CTRL_INTERRUPT_EN 0x10 + +#define nlm_read_usb_reg(b, r) nlm_read_reg(b, r) +#define nlm_write_usb_reg(b, r, v) nlm_write_reg(b, r, v) +#define nlm_get_usb_pcibase(node, inst) \ + nlm_pcicfg_base(XLP_IO_USB_OFFSET(node, inst)) +#define nlm_get_usb_regbase(node, inst) \ + (nlm_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ) + +static void nlm_usb_intr_en(int node, int port) +{ + uint32_t val; + uint64_t port_addr; + + port_addr = nlm_get_usb_regbase(node, port); + val = nlm_read_usb_reg(port_addr, USB_INT_EN); + val = USB_CTRL_INTERRUPT_EN | USB_OHCI_INTERRUPT_EN | + USB_OHCI_INTERRUPT1_EN | USB_OHCI_INTERRUPT2_EN; + nlm_write_usb_reg(port_addr, USB_INT_EN, val); +} + +static void nlm_usb_hw_reset(int node, int port) +{ + uint64_t port_addr; + uint32_t val; + + /* reset USB phy */ + port_addr = nlm_get_usb_regbase(node, port); + val = nlm_read_usb_reg(port_addr, USB_PHY_0); + val &= ~(USB_PHY_RESET | USB_PHY_PORT_RESET_0 | USB_PHY_PORT_RESET_1); + nlm_write_usb_reg(port_addr, USB_PHY_0, val); + + mdelay(100); + val = nlm_read_usb_reg(port_addr, USB_CTL_0); + val &= ~(USB_CONTROLLER_RESET); + val |= 0x4; + nlm_write_usb_reg(port_addr, USB_CTL_0, val); +} + +static int __init nlm_platform_usb_init(void) +{ + if (cpu_is_xlpii()) + return 0; + + pr_info("Initializing USB Interface\n"); + nlm_usb_hw_reset(0, 0); + nlm_usb_hw_reset(0, 3); + + /* Enable PHY interrupts */ + nlm_usb_intr_en(0, 0); + nlm_usb_intr_en(0, 3); + + return 0; +} + +arch_initcall(nlm_platform_usb_init); + +static u64 xlp_usb_dmamask = ~(u32)0; + +/* Fixup the IRQ for USB devices which is exist on XLP SOC PCIE bus */ +static void nlm_usb_fixup_final(struct pci_dev *dev) +{ + dev->dev.dma_mask = &xlp_usb_dmamask; + dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + switch (dev->devfn) { + case 0x10: + dev->irq = PIC_EHCI_0_IRQ; + break; + case 0x11: + dev->irq = PIC_OHCI_0_IRQ; + break; + case 0x12: + dev->irq = PIC_OHCI_1_IRQ; + break; + case 0x13: + dev->irq = PIC_EHCI_1_IRQ; + break; + case 0x14: + dev->irq = PIC_OHCI_2_IRQ; + break; + case 0x15: + dev->irq = PIC_OHCI_3_IRQ; + break; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_EHCI, + nlm_usb_fixup_final); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_OHCI, + nlm_usb_fixup_final); |