summaryrefslogtreecommitdiffstats
path: root/arch/mips/pci/pci-bcm63xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/pci/pci-bcm63xx.c')
-rw-r--r--arch/mips/pci/pci-bcm63xx.c351
1 files changed, 351 insertions, 0 deletions
diff --git a/arch/mips/pci/pci-bcm63xx.c b/arch/mips/pci/pci-bcm63xx.c
new file mode 100644
index 000000000..554836560
--- /dev/null
+++ b/arch/mips/pci/pci-bcm63xx.c
@@ -0,0 +1,351 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <asm/bootinfo.h>
+
+#include <bcm63xx_reset.h>
+
+#include "pci-bcm63xx.h"
+
+/*
+ * Allow PCI to be disabled at runtime depending on board nvram
+ * configuration
+ */
+int bcm63xx_pci_enabled;
+
+static struct resource bcm_pci_mem_resource = {
+ .name = "bcm63xx PCI memory space",
+ .start = BCM_PCI_MEM_BASE_PA,
+ .end = BCM_PCI_MEM_END_PA,
+ .flags = IORESOURCE_MEM
+};
+
+static struct resource bcm_pci_io_resource = {
+ .name = "bcm63xx PCI IO space",
+ .start = BCM_PCI_IO_BASE_PA,
+#ifdef CONFIG_CARDBUS
+ .end = BCM_PCI_IO_HALF_PA,
+#else
+ .end = BCM_PCI_IO_END_PA,
+#endif
+ .flags = IORESOURCE_IO
+};
+
+struct pci_controller bcm63xx_controller = {
+ .pci_ops = &bcm63xx_pci_ops,
+ .io_resource = &bcm_pci_io_resource,
+ .mem_resource = &bcm_pci_mem_resource,
+};
+
+/*
+ * We handle cardbus via a fake Cardbus bridge, memory and io spaces
+ * have to be clearly separated from PCI one since we have different
+ * memory decoder.
+ */
+#ifdef CONFIG_CARDBUS
+static struct resource bcm_cb_mem_resource = {
+ .name = "bcm63xx Cardbus memory space",
+ .start = BCM_CB_MEM_BASE_PA,
+ .end = BCM_CB_MEM_END_PA,
+ .flags = IORESOURCE_MEM
+};
+
+static struct resource bcm_cb_io_resource = {
+ .name = "bcm63xx Cardbus IO space",
+ .start = BCM_PCI_IO_HALF_PA + 1,
+ .end = BCM_PCI_IO_END_PA,
+ .flags = IORESOURCE_IO
+};
+
+struct pci_controller bcm63xx_cb_controller = {
+ .pci_ops = &bcm63xx_cb_ops,
+ .io_resource = &bcm_cb_io_resource,
+ .mem_resource = &bcm_cb_mem_resource,
+};
+#endif
+
+static struct resource bcm_pcie_mem_resource = {
+ .name = "bcm63xx PCIe memory space",
+ .start = BCM_PCIE_MEM_BASE_PA,
+ .end = BCM_PCIE_MEM_END_PA,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource bcm_pcie_io_resource = {
+ .name = "bcm63xx PCIe IO space",
+ .start = 0,
+ .end = 0,
+ .flags = 0,
+};
+
+struct pci_controller bcm63xx_pcie_controller = {
+ .pci_ops = &bcm63xx_pcie_ops,
+ .io_resource = &bcm_pcie_io_resource,
+ .mem_resource = &bcm_pcie_mem_resource,
+};
+
+static u32 bcm63xx_int_cfg_readl(u32 reg)
+{
+ u32 tmp;
+
+ tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
+ tmp |= MPI_PCICFGCTL_WRITEEN_MASK;
+ bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
+ iob();
+ return bcm_mpi_readl(MPI_PCICFGDATA_REG);
+}
+
+static void bcm63xx_int_cfg_writel(u32 val, u32 reg)
+{
+ u32 tmp;
+
+ tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
+ tmp |= MPI_PCICFGCTL_WRITEEN_MASK;
+ bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
+ bcm_mpi_writel(val, MPI_PCICFGDATA_REG);
+}
+
+void __iomem *pci_iospace_start;
+
+static void __init bcm63xx_reset_pcie(void)
+{
+ u32 val;
+ u32 reg;
+
+ /* enable SERDES */
+ if (BCMCPU_IS_6328())
+ reg = MISC_SERDES_CTRL_6328_REG;
+ else
+ reg = MISC_SERDES_CTRL_6362_REG;
+
+ val = bcm_misc_readl(reg);
+ val |= SERDES_PCIE_EN | SERDES_PCIE_EXD_EN;
+ bcm_misc_writel(val, reg);
+
+ /* reset the PCIe core */
+ bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
+ bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
+ mdelay(10);
+
+ bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
+ mdelay(10);
+
+ bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 0);
+ mdelay(200);
+}
+
+static struct clk *pcie_clk;
+
+static int __init bcm63xx_register_pcie(void)
+{
+ u32 val;
+
+ /* enable clock */
+ pcie_clk = clk_get(NULL, "pcie");
+ if (IS_ERR_OR_NULL(pcie_clk))
+ return -ENODEV;
+
+ clk_prepare_enable(pcie_clk);
+
+ bcm63xx_reset_pcie();
+
+ /* configure the PCIe bridge */
+ val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG);
+ val |= OPT1_RD_BE_OPT_EN;
+ val |= OPT1_RD_REPLY_BE_FIX_EN;
+ val |= OPT1_PCIE_BRIDGE_HOLE_DET_EN;
+ val |= OPT1_L1_INT_STATUS_MASK_POL;
+ bcm_pcie_writel(val, PCIE_BRIDGE_OPT1_REG);
+
+ /* setup the interrupts */
+ val = bcm_pcie_readl(PCIE_BRIDGE_RC_INT_MASK_REG);
+ val |= PCIE_RC_INT_A | PCIE_RC_INT_B | PCIE_RC_INT_C | PCIE_RC_INT_D;
+ bcm_pcie_writel(val, PCIE_BRIDGE_RC_INT_MASK_REG);
+
+ val = bcm_pcie_readl(PCIE_BRIDGE_OPT2_REG);
+ /* enable credit checking and error checking */
+ val |= OPT2_TX_CREDIT_CHK_EN;
+ val |= OPT2_UBUS_UR_DECODE_DIS;
+
+ /* set device bus/func for the pcie device */
+ val |= (PCIE_BUS_DEVICE << OPT2_CFG_TYPE1_BUS_NO_SHIFT);
+ val |= OPT2_CFG_TYPE1_BD_SEL;
+ bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG);
+
+ /* setup class code as bridge */
+ val = bcm_pcie_readl(PCIE_IDVAL3_REG);
+ val &= ~IDVAL3_CLASS_CODE_MASK;
+ val |= (PCI_CLASS_BRIDGE_PCI << IDVAL3_SUBCLASS_SHIFT);
+ bcm_pcie_writel(val, PCIE_IDVAL3_REG);
+
+ /* disable bar1 size */
+ val = bcm_pcie_readl(PCIE_CONFIG2_REG);
+ val &= ~CONFIG2_BAR1_SIZE_MASK;
+ bcm_pcie_writel(val, PCIE_CONFIG2_REG);
+
+ /* set bar0 to little endian */
+ val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT;
+ val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT;
+ val |= BASEMASK_REMAP_EN;
+ bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
+
+ val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT;
+ bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
+
+ register_pci_controller(&bcm63xx_pcie_controller);
+
+ return 0;
+}
+
+static int __init bcm63xx_register_pci(void)
+{
+ unsigned int mem_size;
+ u32 val;
+ /*
+ * configuration access are done through IO space, remap 4
+ * first bytes to access it from CPU.
+ *
+ * this means that no io access from CPU should happen while
+ * we do a configuration cycle, but there's no way we can add
+ * a spinlock for each io access, so this is currently kind of
+ * broken on SMP.
+ */
+ pci_iospace_start = ioremap(BCM_PCI_IO_BASE_PA, 4);
+ if (!pci_iospace_start)
+ return -ENOMEM;
+
+ /* setup local bus to PCI access (PCI memory) */
+ val = BCM_PCI_MEM_BASE_PA & MPI_L2P_BASE_MASK;
+ bcm_mpi_writel(val, MPI_L2PMEMBASE1_REG);
+ bcm_mpi_writel(~(BCM_PCI_MEM_SIZE - 1), MPI_L2PMEMRANGE1_REG);
+ bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PMEMREMAP1_REG);
+
+ /* set Cardbus IDSEL (type 0 cfg access on primary bus for
+ * this IDSEL will be done on Cardbus instead) */
+ val = bcm_pcmcia_readl(PCMCIA_C1_REG);
+ val &= ~PCMCIA_C1_CBIDSEL_MASK;
+ val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT);
+ bcm_pcmcia_writel(val, PCMCIA_C1_REG);
+
+#ifdef CONFIG_CARDBUS
+ /* setup local bus to PCI access (Cardbus memory) */
+ val = BCM_CB_MEM_BASE_PA & MPI_L2P_BASE_MASK;
+ bcm_mpi_writel(val, MPI_L2PMEMBASE2_REG);
+ bcm_mpi_writel(~(BCM_CB_MEM_SIZE - 1), MPI_L2PMEMRANGE2_REG);
+ val |= MPI_L2PREMAP_ENABLED_MASK | MPI_L2PREMAP_IS_CARDBUS_MASK;
+ bcm_mpi_writel(val, MPI_L2PMEMREMAP2_REG);
+#else
+ /* disable second access windows */
+ bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG);
+#endif
+
+ /* setup local bus to PCI access (IO memory), we have only 1
+ * IO window for both PCI and cardbus, but it cannot handle
+ * both at the same time, assume standard PCI for now, if
+ * cardbus card has IO zone, PCI fixup will change window to
+ * cardbus */
+ val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK;
+ bcm_mpi_writel(val, MPI_L2PIOBASE_REG);
+ bcm_mpi_writel(~(BCM_PCI_IO_SIZE - 1), MPI_L2PIORANGE_REG);
+ bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PIOREMAP_REG);
+
+ /* enable PCI related GPIO pins */
+ bcm_mpi_writel(MPI_LOCBUSCTL_EN_PCI_GPIO_MASK, MPI_LOCBUSCTL_REG);
+
+ /* setup PCI to local bus access, used by PCI device to target
+ * local RAM while bus mastering */
+ bcm63xx_int_cfg_writel(0, PCI_BASE_ADDRESS_3);
+ if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6368())
+ val = MPI_SP0_REMAP_ENABLE_MASK;
+ else
+ val = 0;
+ bcm_mpi_writel(val, MPI_SP0_REMAP_REG);
+
+ bcm63xx_int_cfg_writel(0x0, PCI_BASE_ADDRESS_4);
+ bcm_mpi_writel(0, MPI_SP1_REMAP_REG);
+
+ mem_size = bcm63xx_get_memory_size();
+
+ /* 6348 before rev b0 exposes only 16 MB of RAM memory through
+ * PCI, throw a warning if we have more memory */
+ if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() & 0xf0) == 0xa0) {
+ if (mem_size > (16 * 1024 * 1024))
+ printk(KERN_WARNING "bcm63xx: this CPU "
+ "revision cannot handle more than 16MB "
+ "of RAM for PCI bus mastering\n");
+ } else {
+ /* setup sp0 range to local RAM size */
+ bcm_mpi_writel(~(mem_size - 1), MPI_SP0_RANGE_REG);
+ bcm_mpi_writel(0, MPI_SP1_RANGE_REG);
+ }
+
+ /* change host bridge retry counter to infinite number of
+ * retry, needed for some broadcom wifi cards with Silicon
+ * Backplane bus where access to srom seems very slow */
+ val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS);
+ val &= ~REG_TIMER_RETRY_MASK;
+ bcm63xx_int_cfg_writel(val, BCMPCI_REG_TIMERS);
+
+ /* enable memory decoder and bus mastering */
+ val = bcm63xx_int_cfg_readl(PCI_COMMAND);
+ val |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ bcm63xx_int_cfg_writel(val, PCI_COMMAND);
+
+ /* enable read prefetching & disable byte swapping for bus
+ * mastering transfers */
+ val = bcm_mpi_readl(MPI_PCIMODESEL_REG);
+ val &= ~MPI_PCIMODESEL_BAR1_NOSWAP_MASK;
+ val &= ~MPI_PCIMODESEL_BAR2_NOSWAP_MASK;
+ val &= ~MPI_PCIMODESEL_PREFETCH_MASK;
+ val |= (8 << MPI_PCIMODESEL_PREFETCH_SHIFT);
+ bcm_mpi_writel(val, MPI_PCIMODESEL_REG);
+
+ /* enable pci interrupt */
+ val = bcm_mpi_readl(MPI_LOCINT_REG);
+ val |= MPI_LOCINT_MASK(MPI_LOCINT_EXT_PCI_INT);
+ bcm_mpi_writel(val, MPI_LOCINT_REG);
+
+ register_pci_controller(&bcm63xx_controller);
+
+#ifdef CONFIG_CARDBUS
+ register_pci_controller(&bcm63xx_cb_controller);
+#endif
+
+ /* mark memory space used for IO mapping as reserved */
+ request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE,
+ "bcm63xx PCI IO space");
+ return 0;
+}
+
+
+static int __init bcm63xx_pci_init(void)
+{
+ if (!bcm63xx_pci_enabled)
+ return -ENODEV;
+
+ switch (bcm63xx_get_cpu_id()) {
+ case BCM6328_CPU_ID:
+ case BCM6362_CPU_ID:
+ return bcm63xx_register_pcie();
+ case BCM3368_CPU_ID:
+ case BCM6348_CPU_ID:
+ case BCM6358_CPU_ID:
+ case BCM6368_CPU_ID:
+ return bcm63xx_register_pci();
+ default:
+ return -ENODEV;
+ }
+}
+
+arch_initcall(bcm63xx_pci_init);