summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot/Makefile
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/boot/Makefile')
-rw-r--r--arch/powerpc/boot/Makefile507
1 files changed, 507 insertions, 0 deletions
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
new file mode 100644
index 000000000..8b78eba75
--- /dev/null
+++ b/arch/powerpc/boot/Makefile
@@ -0,0 +1,507 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for making ELF bootable images for booting on CHRP
+# using Open Firmware.
+#
+# Geert Uytterhoeven September 1997
+#
+# Based on coffboot by Paul Mackerras
+# Simplified for ppc64 by Todd Inglett
+#
+# NOTE: this code may be built for 32 bit in ELF32 format even though
+# it packages a 64 bit kernel. We do this to simplify the
+# bootloader and increase compatibility with OpenFirmware.
+#
+# To this end we need to define BOOTCC, etc, as the tools
+# needed to build the 32 bit image. That's normally the same
+# compiler for the rest of the kernel, with the -m32 flag added.
+# To make it easier to setup a cross compiler,
+# CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE
+# in the toplevel makefile.
+
+all: $(obj)/zImage
+
+ifdef CROSS32_COMPILE
+ BOOTCC := $(CROSS32_COMPILE)gcc
+ BOOTAR := $(CROSS32_COMPILE)ar
+else
+ BOOTCC := $(CC)
+ BOOTAR := $(AR)
+endif
+
+BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
+ -fno-strict-aliasing -O2 -msoft-float -mno-altivec -mno-vsx \
+ $(call cc-option,-mno-spe) $(call cc-option,-mspe=no) \
+ -pipe -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
+ $(LINUXINCLUDE)
+
+ifdef CONFIG_PPC64_BOOT_WRAPPER
+BOOTCFLAGS += -m64
+else
+BOOTCFLAGS += -m32
+endif
+
+BOOTCFLAGS += -isystem $(shell $(BOOTCC) -print-file-name=include)
+
+ifdef CONFIG_CPU_BIG_ENDIAN
+BOOTCFLAGS += -mbig-endian
+else
+BOOTCFLAGS += -mlittle-endian
+BOOTCFLAGS += $(call cc-option,-mabi=elfv2)
+endif
+
+BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -nostdinc
+
+BOOTARFLAGS := -crD
+
+ifdef CONFIG_CC_IS_CLANG
+BOOTCFLAGS += $(CLANG_FLAGS)
+BOOTAFLAGS += $(CLANG_FLAGS)
+endif
+
+ifdef CONFIG_DEBUG_INFO
+BOOTCFLAGS += -g
+endif
+
+ifeq ($(call cc-option-yn, -fstack-protector),y)
+BOOTCFLAGS += -fno-stack-protector
+endif
+
+BOOTCFLAGS += -I$(objtree)/$(obj) -I$(srctree)/$(obj)
+
+DTC_FLAGS ?= -p 1024
+
+$(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
+$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440
+$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
+$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440
+$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440
+$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
+$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
+$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
+$(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405
+
+# The pre-boot decompressors pull in a lot of kernel headers and other source
+# files. This creates a bit of a dependency headache since we need to copy
+# these files into the build dir, fix up any includes and ensure that dependent
+# files are copied in the right order.
+
+# these need to be seperate variables because they are copied out of different
+# directories in the kernel tree. Sure you COULd merge them, but it's a
+# cure-is-worse-than-disease situation.
+zlib-decomp-$(CONFIG_KERNEL_GZIP) := decompress_inflate.c
+zlib-$(CONFIG_KERNEL_GZIP) := inffast.c inflate.c inftrees.c
+zlibheader-$(CONFIG_KERNEL_GZIP) := inffast.h inffixed.h inflate.h inftrees.h infutil.h
+zliblinuxheader-$(CONFIG_KERNEL_GZIP) := zlib.h zconf.h zutil.h
+
+$(addprefix $(obj)/, decompress.o): \
+ $(addprefix $(obj)/,$(zlib-decomp-y))
+
+$(addprefix $(obj)/, $(zlib-decomp-y)): \
+ $(addprefix $(obj)/,$(zliblinuxheader-y)) \
+ $(addprefix $(obj)/,$(zlibheader-y)) \
+ $(addprefix $(obj)/,$(zlib-y))
+
+$(addprefix $(obj)/,$(zlib-y)): \
+ $(addprefix $(obj)/,$(zliblinuxheader-y)) \
+ $(addprefix $(obj)/,$(zlibheader-y))
+
+libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
+libfdtheader := fdt.h libfdt.h libfdt_internal.h
+
+$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o opal.o \
+ treeboot-akebono.o treeboot-currituck.o treeboot-iss4xx.o): \
+ $(addprefix $(obj)/,$(libfdtheader))
+
+src-wlib-y := string.S crt0.S stdio.c decompress.c main.c \
+ $(libfdt) libfdt-wrapper.c \
+ ns16550.c serial.c simple_alloc.c div64.S util.S \
+ elf_util.c $(zlib-y) devtree.c stdlib.c \
+ oflib.c ofconsole.c cuboot.c
+
+src-wlib-$(CONFIG_PPC_MPC52xx) += mpc52xx-psc.c
+src-wlib-$(CONFIG_PPC64_BOOT_WRAPPER) += opal-calls.S opal.c
+ifndef CONFIG_PPC64_BOOT_WRAPPER
+src-wlib-y += crtsavres.S
+endif
+src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c
+src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c
+src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c
+src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c
+src-wlib-$(CONFIG_EMBEDDED6xx) += ugecon.c fsl-soc.c
+src-wlib-$(CONFIG_CPM) += cpm-serial.c
+
+src-plat-y := of.c epapr.c
+src-plat-$(CONFIG_40x) += fixed-head.S cuboot-hotfoot.c \
+ cuboot-acadia.c \
+ cuboot-kilauea.c simpleboot.c
+src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \
+ cuboot-bamboo.c cuboot-sam440ep.c \
+ cuboot-sequoia.c cuboot-rainier.c \
+ cuboot-taishan.c cuboot-katmai.c \
+ cuboot-warp.c cuboot-yosemite.c \
+ treeboot-iss4xx.c treeboot-currituck.c \
+ treeboot-akebono.c \
+ simpleboot.c fixed-head.S
+src-plat-$(CONFIG_PPC_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c
+src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c
+src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c
+src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c
+src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c
+src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
+ gamecube-head.S gamecube.c \
+ wii-head.S wii.c holly.c \
+ fixed-head.S mvme5100.c
+src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
+src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
+src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
+src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S
+src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
+src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
+src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
+
+src-wlib := $(sort $(src-wlib-y))
+src-plat := $(sort $(src-plat-y))
+src-boot := $(src-wlib) $(src-plat) empty.c
+
+src-boot := $(addprefix $(obj)/, $(src-boot))
+obj-boot := $(addsuffix .o, $(basename $(src-boot)))
+obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib))))
+obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat))))
+obj-plat: $(libfdt)
+
+quiet_cmd_copy_kern_src = COPY $@
+ cmd_copy_kern_src = sed -f $(srctree)/arch/powerpc/boot/fixup-headers.sed $< > $@
+
+$(addprefix $(obj)/,$(zlib-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
+ $(call cmd,copy_kern_src)
+
+$(addprefix $(obj)/,$(zlibheader-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
+ $(call cmd,copy_kern_src)
+
+$(addprefix $(obj)/,$(zliblinuxheader-y)): $(obj)/%: $(srctree)/include/linux/%
+ $(call cmd,copy_kern_src)
+
+$(addprefix $(obj)/,$(zlib-decomp-y)): $(obj)/%: $(srctree)/lib/%
+ $(call cmd,copy_kern_src)
+
+quiet_cmd_copy_libfdt = COPY $@
+ cmd_copy_libfdt = cp $< $@
+
+$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
+ $(call cmd,copy_libfdt)
+
+$(obj)/empty.c:
+ $(Q)touch $@
+
+$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(srctree)/$(src)/%.S
+ $(Q)cp $< $@
+
+clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \
+ $(zlib-decomp-) $(libfdt) $(libfdtheader) \
+ empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
+
+quiet_cmd_bootcc = BOOTCC $@
+ cmd_bootcc = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
+
+quiet_cmd_bootas = BOOTAS $@
+ cmd_bootas = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
+
+quiet_cmd_bootar = BOOTAR $@
+ cmd_bootar = $(BOOTAR) $(BOOTARFLAGS) $@.$$$$ $(real-prereqs); mv $@.$$$$ $@
+
+$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE
+ $(call if_changed_dep,bootcc)
+$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE
+ $(Q)mkdir -p $(dir $@)
+ $(call if_changed_dep,bootcc)
+$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
+ $(Q)mkdir -p $(dir $@)
+ $(call if_changed_dep,bootas)
+
+$(obj)/wrapper.a: $(obj-wlib) FORCE
+ $(call if_changed,bootar)
+
+hostprogs := addnote hack-coff mktree
+
+targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
+extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
+ $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds
+
+dtstree := $(srctree)/$(src)/dts
+
+wrapper :=$(srctree)/$(src)/wrapper
+wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \
+ $(wrapper) FORCE
+
+#############
+# Bits for building various flavours of zImage
+
+ifneq ($(CROSS32_COMPILE),)
+CROSSWRAP := -C "$(CROSS32_COMPILE)"
+else
+ifneq ($(CROSS_COMPILE),)
+CROSSWRAP := -C "$(CROSS_COMPILE)"
+endif
+endif
+
+compressor-$(CONFIG_KERNEL_GZIP) := gz
+compressor-$(CONFIG_KERNEL_XZ) := xz
+compressor-$(CONFIG_KERNEL_LZMA) := lzma
+compressor-$(CONFIG_KERNEL_LZO) := lzo
+
+# args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd
+quiet_cmd_wrap = WRAP $@
+ cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \
+ $(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \
+ vmlinux
+
+image-$(CONFIG_PPC_PSERIES) += zImage.pseries
+image-$(CONFIG_PPC_POWERNV) += zImage.pseries
+image-$(CONFIG_PPC_MAPLE) += zImage.maple
+image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries
+image-$(CONFIG_PPC_PS3) += dtbImage.ps3
+image-$(CONFIG_PPC_CHRP) += zImage.chrp
+image-$(CONFIG_PPC_EFIKA) += zImage.chrp
+image-$(CONFIG_PPC_PMAC) += zImage.pmac
+image-$(CONFIG_PPC_HOLLY) += dtbImage.holly
+image-$(CONFIG_DEFAULT_UIMAGE) += uImage
+image-$(CONFIG_EPAPR_BOOT) += zImage.epapr
+
+#
+# Targets which embed a device tree blob
+#
+# Theses are default targets to build images which embed device tree blobs.
+# They are only required on boards which do not have FDT support in firmware.
+# Boards with newish u-boot firmware can use the uImage target above
+#
+
+# Board ports in arch/powerpc/platform/40x/Kconfig
+image-$(CONFIG_HOTFOOT) += cuImage.hotfoot
+image-$(CONFIG_ACADIA) += cuImage.acadia
+image-$(CONFIG_OBS600) += uImage.obs600
+
+# Board ports in arch/powerpc/platform/44x/Kconfig
+image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
+image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo
+image-$(CONFIG_SAM440EP) += cuImage.sam440ep
+image-$(CONFIG_SEQUOIA) += cuImage.sequoia
+image-$(CONFIG_RAINIER) += cuImage.rainier
+image-$(CONFIG_TAISHAN) += cuImage.taishan
+image-$(CONFIG_KATMAI) += cuImage.katmai
+image-$(CONFIG_WARP) += cuImage.warp
+image-$(CONFIG_YOSEMITE) += cuImage.yosemite
+image-$(CONFIG_ISS4xx) += treeImage.iss4xx \
+ treeImage.iss4xx-mpic
+image-$(CONFIG_CURRITUCK) += treeImage.currituck
+image-$(CONFIG_AKEBONO) += treeImage.akebono
+
+# Board ports in arch/powerpc/platform/8xx/Kconfig
+image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads
+image-$(CONFIG_MPC885ADS) += cuImage.mpc885ads
+image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc
+image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \
+ dtbImage.adder875-redboot
+
+# Board ports in arch/powerpc/platform/52xx/Kconfig
+image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200
+image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b
+image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200
+
+# Board ports in arch/powerpc/platform/82xx/Kconfig
+image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads
+image-$(CONFIG_PQ2FADS) += cuImage.pq2fads
+image-$(CONFIG_EP8248E) += dtbImage.ep8248e
+
+# Board ports in arch/powerpc/platform/83xx/Kconfig
+image-$(CONFIG_MPC832x_MDS) += cuImage.mpc832x_mds
+image-$(CONFIG_MPC832x_RDB) += cuImage.mpc832x_rdb
+image-$(CONFIG_MPC834x_ITX) += cuImage.mpc8349emitx \
+ cuImage.mpc8349emitxgp
+image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds
+image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds
+image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot
+
+# Board ports in arch/powerpc/platform/85xx/Kconfig
+image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads
+image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads
+image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \
+ cuImage.mpc8548cds_32b \
+ cuImage.mpc8555cds
+image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds
+image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \
+ cuImage.mpc8572ds
+image-$(CONFIG_TQM8540) += cuImage.tqm8540
+image-$(CONFIG_TQM8541) += cuImage.tqm8541
+image-$(CONFIG_TQM8548) += cuImage.tqm8548
+image-$(CONFIG_TQM8555) += cuImage.tqm8555
+image-$(CONFIG_TQM8560) += cuImage.tqm8560
+image-$(CONFIG_SBC8548) += cuImage.sbc8548
+image-$(CONFIG_KSI8560) += cuImage.ksi8560
+
+# Board ports in arch/powerpc/platform/86xx/Kconfig
+image-$(CONFIG_MVME7100) += dtbImage.mvme7100
+
+# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
+image-$(CONFIG_STORCENTER) += cuImage.storcenter
+image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2
+image-$(CONFIG_GAMECUBE) += dtbImage.gamecube
+image-$(CONFIG_WII) += dtbImage.wii
+image-$(CONFIG_MVME5100) += dtbImage.mvme5100
+
+# Board port in arch/powerpc/platform/amigaone/Kconfig
+image-$(CONFIG_AMIGAONE) += cuImage.amigaone
+
+# For 32-bit powermacs, build the COFF and miboot images
+# as well as the ELF images.
+ifdef CONFIG_PPC32
+image-$(CONFIG_PPC_PMAC) += zImage.coff zImage.miboot
+endif
+
+# Allow extra targets to be added to the defconfig
+image-y += $(subst ",,$(CONFIG_EXTRA_TARGETS))
+
+initrd- := $(patsubst zImage%, zImage.initrd%, $(image-))
+initrd-y := $(patsubst zImage%, zImage.initrd%, \
+ $(patsubst dtbImage%, dtbImage.initrd%, \
+ $(patsubst simpleImage%, simpleImage.initrd%, \
+ $(patsubst treeImage%, treeImage.initrd%, $(image-y)))))
+initrd-y := $(filter-out $(image-y), $(initrd-y))
+targets += $(image-y) $(initrd-y)
+targets += $(foreach x, dtbImage uImage cuImage simpleImage treeImage, \
+ $(patsubst $(x).%, dts/%.dtb, $(filter $(x).%, $(image-y))))
+targets += $(foreach x, dtbImage uImage cuImage simpleImage treeImage, \
+ $(patsubst $(x).%, dts/fsl/%.dtb, $(filter $(x).%, $(image-y))))
+
+$(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz
+
+# Don't put the ramdisk on the pattern rule; when its missing make will try
+# the pattern rule with less dependencies that also matches (even with the
+# hard dependency listed).
+$(obj)/zImage.initrd.%: vmlinux $(wrapperbits) FORCE
+ $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz)
+
+$(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperbits) FORCE
+ $(call if_changed,wrap,$(subst $(obj)/zImage.,,$@))
+
+# dtbImage% - a dtbImage is a zImage with an embedded device tree blob
+$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE
+ $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
+
+$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE
+ $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb)
+
+# This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
+# prefix
+$(obj)/vmlinux.strip: vmlinux
+ $(STRIP) -s -R .comment $< -o $@
+
+$(obj)/uImage: vmlinux $(wrapperbits) FORCE
+ $(call if_changed,wrap,uboot)
+
+$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
+
+$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb)
+
+$(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
+
+$(obj)/cuImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb)
+
+$(obj)/simpleImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
+
+$(obj)/simpleImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb)
+
+$(obj)/treeImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)
+
+$(obj)/treeImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+ $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb)
+
+# Needed for the above targets to work with dts/fsl/ files
+$(obj)/dts/%.dtb: $(obj)/dts/fsl/%.dtb
+ @cp $< $@
+
+# If there isn't a platform selected then just strip the vmlinux.
+ifeq (,$(image-y))
+image-y := vmlinux.strip
+endif
+
+$(obj)/zImage: $(addprefix $(obj)/, $(image-y))
+ $(Q)rm -f $@; ln $< $@
+$(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y))
+ $(Q)rm -f $@; ln $< $@
+
+# Only install the vmlinux
+install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
+ sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)"
+
+# Install the vmlinux and other built boot targets.
+zInstall: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
+ sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $^
+
+PHONY += install zInstall
+
+# anything not in $(targets)
+clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
+ zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
+ zImage.miboot zImage.pmac zImage.pseries \
+ zImage.maple simpleImage.* otheros.bld
+
+# clean up files cached by wrapper
+clean-kernel-base := vmlinux.strip vmlinux.bin
+clean-kernel := $(addsuffix .gz,$(clean-kernel-base))
+clean-kernel += $(addsuffix .xz,$(clean-kernel-base))
+# If not absolute clean-files are relative to $(obj).
+clean-files += $(addprefix $(objtree)/, $(clean-kernel))
+
+WRAPPER_OBJDIR := /usr/lib/kernel-wrapper
+WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts
+WRAPPER_BINDIR := /usr/sbin
+INSTALL := install
+
+extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y))
+hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs))
+wrapper-installed := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper
+dts-installed := $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts))
+
+all-installed := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed)
+
+quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
+ cmd_mkdir = mkdir -p $@
+
+quiet_cmd_install = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@)
+ cmd_install = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@
+
+quiet_cmd_install_dts = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@)
+ cmd_install_dts = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@
+
+quiet_cmd_install_exe = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@)
+ cmd_install_exe = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@
+
+quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@)
+ cmd_install_wrapper = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\
+ sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \
+ -e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \
+
+
+$(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR):
+ $(call cmd,mkdir)
+
+$(extra-installed) : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR)
+ $(call cmd,install)
+
+$(hostprogs-installed) : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR)
+ $(call cmd,install_exe)
+
+$(dts-installed) : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR)
+ $(call cmd,install_dts)
+
+$(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR)
+ $(call cmd,install_wrapper)
+
+$(obj)/bootwrapper_install: $(all-installed)