summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot/dts/katmai.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/boot/dts/katmai.dts')
-rw-r--r--arch/powerpc/boot/dts/katmai.dts510
1 files changed, 510 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
new file mode 100644
index 000000000..a8f353229
--- /dev/null
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -0,0 +1,510 @@
+/*
+ * Device Tree Source for AMCC Katmai eval board
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "amcc,katmai";
+ compatible = "amcc,katmai";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ serial2 = &UART2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,440SPe";
+ reg = <0x00000000>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ timebase-frequency = <0>; /* Filled in by zImage */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ reset-type = <2>; /* Use chip-reset */
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-440spe","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-440spe","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0x0d0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-440spe","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0x0e0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic-440spe","ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0x0f0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-440spe";
+ dcr-reg = <0x00e 0x002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-440spe";
+ dcr-reg = <0x00c 0x002>;
+ };
+
+ MQ0: mq {
+ compatible = "ibm,mq-440spe";
+ dcr-reg = <0x040 0x020>;
+ };
+
+ plb {
+ compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ /* addr-child addr-parent size */
+ ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000
+ 0x4 0x00200000 0x4 0x00200000 0x00000400
+ 0x4 0xe0000000 0x4 0xe0000000 0x20000000
+ 0xc 0x00000000 0xc 0x00000000 0x20000000
+ 0xd 0x00000000 0xd 0x00000000 0x80000000
+ 0xd 0x80000000 0xd 0x80000000 0x80000000
+ 0xe 0x00000000 0xe 0x00000000 0x80000000
+ 0xe 0x80000000 0xe 0x80000000 0x80000000
+ 0xf 0x00000000 0xf 0x00000000 0x80000000
+ 0xf 0x80000000 0xf 0x80000000 0x80000000>;
+ clock-frequency = <0>; /* Filled in by zImage */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
+ dcr-reg = <0x010 0x002>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
+ dcr-reg = <0x180 0x062>;
+ num-tx-chans = <2>;
+ num-rx-chans = <1>;
+ interrupt-parent = <&MAL0>;
+ interrupts = <0x0 0x1 0x2 0x3 0x4>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
+ /*RXEOB*/ 0x1 &UIC1 0x7 0x4
+ /*SERR*/ 0x2 &UIC1 0x1 0x4
+ /*TXDE*/ 0x3 &UIC1 0x2 0x4
+ /*RXDE*/ 0x4 &UIC1 0x3 0x4>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>;
+ clock-frequency = <0>; /* Filled in by zImage */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
+ dcr-reg = <0x012 0x002>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ /* ranges property is supplied by U-Boot */
+ interrupts = <0x5 0x1>;
+ interrupt-parent = <&UIC1>;
+
+ nor_flash@0,0 {
+ compatible = "cfi-flash";
+ bank-width = <2>;
+ reg = <0x00000000 0x00000000 0x01000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x001e0000>;
+ };
+ partition@1e0000 {
+ label = "dtb";
+ reg = <0x001e0000 0x00020000>;
+ };
+ partition@200000 {
+ label = "root";
+ reg = <0x00200000 0x00200000>;
+ };
+ partition@400000 {
+ label = "user";
+ reg = <0x00400000 0x00b60000>;
+ };
+ partition@f60000 {
+ label = "env";
+ reg = <0x00f60000 0x00040000>;
+ };
+ partition@fa0000 {
+ label = "u-boot";
+ reg = <0x00fa0000 0x00060000>;
+ };
+ };
+ };
+
+ UART0: serial@f0000200 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xf0000200 0x00000008>;
+ virtual-reg = <0xa0000200>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ current-speed = <115200>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x0 0x4>;
+ };
+
+ UART1: serial@f0000300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xf0000300 0x00000008>;
+ virtual-reg = <0xa0000300>;
+ clock-frequency = <0>;
+ current-speed = <0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x1 0x4>;
+ };
+
+
+ UART2: serial@f0000600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xf0000600 0x00000008>;
+ virtual-reg = <0xa0000600>;
+ clock-frequency = <0>;
+ current-speed = <0>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x5 0x4>;
+ };
+
+ IIC0: i2c@f0000400 {
+ compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+ reg = <0xf0000400 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x2 0x4>;
+ };
+
+ IIC1: i2c@f0000500 {
+ compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+ reg = <0xf0000500 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x3 0x4>;
+ };
+
+ EMAC0: ethernet@f0000800 {
+ linux,network-index = <0x0>;
+ device_type = "network";
+ compatible = "ibm,emac-440spe", "ibm,emac4";
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x1c 0x4 0x1d 0x4>;
+ reg = <0xf0000800 0x00000074>;
+ local-mac-address = [000000000000];
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ phy-mode = "gmii";
+ phy-map = <0x00000000>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+ };
+
+ PCIX0: pci@c0ec00000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix";
+ primary;
+ large-inbound-windows;
+ enable-msi-hole;
+ reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */
+ 0x00000000 0x00000000 0x00000000 /* no IACK cycles */
+ 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */
+ 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */
+ 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+ /* Inbound 4GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /*
+ * On Katmai, the following PCI-X interrupts signals
+ * have to be enabled via jumpers (only INTA is
+ * enabled per default):
+ *
+ * INTB: J3: 1-2
+ * INTC: J2: 1-2
+ * INTD: J1: 1-2
+ */
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 1 */
+ 0x800 0x0 0x0 0x1 &UIC1 0x14 0x8
+ 0x800 0x0 0x0 0x2 &UIC1 0x13 0x8
+ 0x800 0x0 0x0 0x3 &UIC1 0x12 0x8
+ 0x800 0x0 0x0 0x4 &UIC1 0x11 0x8
+ >;
+ };
+
+ PCIE0: pcie@d00000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+ primary;
+ port = <0x0>; /* port number */
+ reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
+ 0x0000000c 0x10000000 0x00001000>; /* Registers */
+ dcr-reg = <0x100 0x020>;
+ sdr-base = <0x300>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+ /* Inbound 4GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+ /* This drives busses 0x10 to 0x1f */
+ bus-range = <0x10 0x1f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
+ };
+
+ PCIE1: pcie@d20000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+ primary;
+ port = <0x1>; /* port number */
+ reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */
+ 0x0000000c 0x10001000 0x00001000>; /* Registers */
+ dcr-reg = <0x120 0x020>;
+ sdr-base = <0x340>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+ /* Inbound 4GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+ /* This drives busses 0x20 to 0x2f */
+ bus-range = <0x20 0x2f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
+ };
+
+ PCIE2: pcie@d40000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+ primary;
+ port = <0x2>; /* port number */
+ reg = <0x0000000d 0x40000000 0x20000000 /* Config space access */
+ 0x0000000c 0x10002000 0x00001000>; /* Registers */
+ dcr-reg = <0x140 0x020>;
+ sdr-base = <0x370>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
+
+ /* Inbound 4GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+ /* This drives busses 0x30 to 0x3f */
+ bus-range = <0x30 0x3f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
+ };
+
+ MSI: ppc4xx-msi@400300000 {
+ compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
+ reg = < 0x4 0x00300000 0x100>;
+ sdr-base = <0x3B0>;
+ msi-data = <0x00000000>;
+ msi-mask = <0x44440000>;
+ interrupt-count = <3>;
+ interrupts =<0 1 2 3>;
+ interrupt-parent = <&UIC0>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0 &UIC0 0xC 1
+ 1 &UIC0 0x0D 1
+ 2 &UIC0 0x0E 1
+ 3 &UIC0 0x0F 1>;
+ };
+
+ I2O: i2o@400100000 {
+ compatible = "ibm,i2o-440spe";
+ reg = <0x00000004 0x00100000 0x100>;
+ dcr-reg = <0x060 0x020>;
+ };
+
+ DMA0: dma0@400100100 {
+ compatible = "ibm,dma-440spe";
+ cell-index = <0>;
+ reg = <0x00000004 0x00100100 0x100>;
+ dcr-reg = <0x060 0x020>;
+ interrupt-parent = <&DMA0>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <
+ 0 &UIC0 0x14 4
+ 1 &UIC1 0x16 4>;
+ };
+
+ DMA1: dma1@400100200 {
+ compatible = "ibm,dma-440spe";
+ cell-index = <1>;
+ reg = <0x00000004 0x00100200 0x100>;
+ dcr-reg = <0x060 0x020>;
+ interrupt-parent = <&DMA1>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <
+ 0 &UIC0 0x16 4
+ 1 &UIC1 0x16 4>;
+ };
+
+ xor-accel@400200000 {
+ compatible = "amcc,xor-accelerator";
+ reg = <0x00000004 0x00200000 0x400>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x1f 4>;
+ };
+ };
+
+ chosen {
+ stdout-path = "/plb/opb/serial@f0000200";
+ };
+};