diff options
Diffstat (limited to 'arch/powerpc/include/asm/xive-regs.h')
| -rw-r--r-- | arch/powerpc/include/asm/xive-regs.h | 131 |
1 files changed, 131 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/xive-regs.h b/arch/powerpc/include/asm/xive-regs.h new file mode 100644 index 000000000..8b211faa0 --- /dev/null +++ b/arch/powerpc/include/asm/xive-regs.h @@ -0,0 +1,131 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2016,2017 IBM Corporation. + */ +#ifndef _ASM_POWERPC_XIVE_REGS_H +#define _ASM_POWERPC_XIVE_REGS_H + +/* + * "magic" Event State Buffer (ESB) MMIO offsets. + * + * Each interrupt source has a 2-bit state machine called ESB + * which can be controlled by MMIO. It's made of 2 bits, P and + * Q. P indicates that an interrupt is pending (has been sent + * to a queue and is waiting for an EOI). Q indicates that the + * interrupt has been triggered while pending. + * + * This acts as a coalescing mechanism in order to guarantee + * that a given interrupt only occurs at most once in a queue. + * + * When doing an EOI, the Q bit will indicate if the interrupt + * needs to be re-triggered. + * + * The following offsets into the ESB MMIO allow to read or + * manipulate the PQ bits. They must be used with an 8-bytes + * load instruction. They all return the previous state of the + * interrupt (atomically). + * + * Additionally, some ESB pages support doing an EOI via a + * store at 0 and some ESBs support doing a trigger via a + * separate trigger page. + */ +#define XIVE_ESB_STORE_EOI 0x400 /* Store */ +#define XIVE_ESB_LOAD_EOI 0x000 /* Load */ +#define XIVE_ESB_GET 0x800 /* Load */ +#define XIVE_ESB_SET_PQ_00 0xc00 /* Load */ +#define XIVE_ESB_SET_PQ_01 0xd00 /* Load */ +#define XIVE_ESB_SET_PQ_10 0xe00 /* Load */ +#define XIVE_ESB_SET_PQ_11 0xf00 /* Load */ + +/* + * Load-after-store ordering + * + * Adding this offset to the load address will enforce + * load-after-store ordering. This is required to use StoreEOI. + */ +#define XIVE_ESB_LD_ST_MO 0x40 /* Load-after-store ordering */ + +#define XIVE_ESB_VAL_P 0x2 +#define XIVE_ESB_VAL_Q 0x1 +#define XIVE_ESB_INVALID 0xFF + +/* + * Thread Management (aka "TM") registers + */ + +/* TM register offsets */ +#define TM_QW0_USER 0x000 /* All rings */ +#define TM_QW1_OS 0x010 /* Ring 0..2 */ +#define TM_QW2_HV_POOL 0x020 /* Ring 0..1 */ +#define TM_QW3_HV_PHYS 0x030 /* Ring 0..1 */ + +/* Byte offsets inside a QW QW0 QW1 QW2 QW3 */ +#define TM_NSR 0x0 /* + + - + */ +#define TM_CPPR 0x1 /* - + - + */ +#define TM_IPB 0x2 /* - + + + */ +#define TM_LSMFB 0x3 /* - + + + */ +#define TM_ACK_CNT 0x4 /* - + - - */ +#define TM_INC 0x5 /* - + - + */ +#define TM_AGE 0x6 /* - + - + */ +#define TM_PIPR 0x7 /* - + - + */ + +#define TM_WORD0 0x0 +#define TM_WORD1 0x4 + +/* + * QW word 2 contains the valid bit at the top and other fields + * depending on the QW. + */ +#define TM_WORD2 0x8 +#define TM_QW0W2_VU PPC_BIT32(0) +#define TM_QW0W2_LOGIC_SERV PPC_BITMASK32(1,31) // XX 2,31 ? +#define TM_QW1W2_VO PPC_BIT32(0) +#define TM_QW1W2_OS_CAM PPC_BITMASK32(8,31) +#define TM_QW2W2_VP PPC_BIT32(0) +#define TM_QW2W2_POOL_CAM PPC_BITMASK32(8,31) +#define TM_QW3W2_VT PPC_BIT32(0) +#define TM_QW3W2_LP PPC_BIT32(6) +#define TM_QW3W2_LE PPC_BIT32(7) +#define TM_QW3W2_T PPC_BIT32(31) + +/* + * In addition to normal loads to "peek" and writes (only when invalid) + * using 4 and 8 bytes accesses, the above registers support these + * "special" byte operations: + * + * - Byte load from QW0[NSR] - User level NSR (EBB) + * - Byte store to QW0[NSR] - User level NSR (EBB) + * - Byte load/store to QW1[CPPR] and QW3[CPPR] - CPPR access + * - Byte load from QW3[TM_WORD2] - Read VT||00000||LP||LE on thrd 0 + * otherwise VT||0000000 + * - Byte store to QW3[TM_WORD2] - Set VT bit (and LP/LE if present) + * + * Then we have all these "special" CI ops at these offset that trigger + * all sorts of side effects: + */ +#define TM_SPC_ACK_EBB 0x800 /* Load8 ack EBB to reg*/ +#define TM_SPC_ACK_OS_REG 0x810 /* Load16 ack OS irq to reg */ +#define TM_SPC_PUSH_USR_CTX 0x808 /* Store32 Push/Validate user context */ +#define TM_SPC_PULL_USR_CTX 0x808 /* Load32 Pull/Invalidate user context */ +#define TM_SPC_SET_OS_PENDING 0x812 /* Store8 Set OS irq pending bit */ +#define TM_SPC_PULL_OS_CTX 0x818 /* Load32/Load64 Pull/Invalidate OS context to reg */ +#define TM_SPC_PULL_POOL_CTX 0x828 /* Load32/Load64 Pull/Invalidate Pool context to reg*/ +#define TM_SPC_ACK_HV_REG 0x830 /* Load16 ack HV irq to reg */ +#define TM_SPC_PULL_USR_CTX_OL 0xc08 /* Store8 Pull/Inval usr ctx to odd line */ +#define TM_SPC_ACK_OS_EL 0xc10 /* Store8 ack OS irq to even line */ +#define TM_SPC_ACK_HV_POOL_EL 0xc20 /* Store8 ack HV evt pool to even line */ +#define TM_SPC_ACK_HV_EL 0xc30 /* Store8 ack HV irq to even line */ +/* XXX more... */ + +/* NSR fields for the various QW ack types */ +#define TM_QW0_NSR_EB PPC_BIT8(0) +#define TM_QW1_NSR_EO PPC_BIT8(0) +#define TM_QW3_NSR_HE PPC_BITMASK8(0,1) +#define TM_QW3_NSR_HE_NONE 0 +#define TM_QW3_NSR_HE_POOL 1 +#define TM_QW3_NSR_HE_PHYS 2 +#define TM_QW3_NSR_HE_LSI 3 +#define TM_QW3_NSR_I PPC_BIT8(2) +#define TM_QW3_NSR_GRP_LVL PPC_BIT8(3,7) + +#endif /* _ASM_POWERPC_XIVE_REGS_H */ |