diff options
Diffstat (limited to 'arch/powerpc/include/asm')
360 files changed, 56785 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/8xx_immap.h b/arch/powerpc/include/asm/8xx_immap.h new file mode 100644 index 000000000..bdf0563ba --- /dev/null +++ b/arch/powerpc/include/asm/8xx_immap.h @@ -0,0 +1,564 @@ +/* + * MPC8xx Internal Memory Map + * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) + * + * The I/O on the MPC860 is comprised of blocks of special registers + * and the dual port ram for the Communication Processor Module. + * Within this space are functional units such as the SIU, memory + * controller, system timers, and other control functions. It is + * a combination that I found difficult to separate into logical + * functional files.....but anyone else is welcome to try. -- Dan + */ +#ifdef __KERNEL__ +#ifndef __IMMAP_8XX__ +#define __IMMAP_8XX__ + +/* System configuration registers. +*/ +typedef struct sys_conf { + uint sc_siumcr; + uint sc_sypcr; + uint sc_swt; + char res1[2]; + ushort sc_swsr; + uint sc_sipend; + uint sc_simask; + uint sc_siel; + uint sc_sivec; + uint sc_tesr; + char res2[0xc]; + uint sc_sdcr; + char res3[0x4c]; +} sysconf8xx_t; + +/* PCMCIA configuration registers. +*/ +typedef struct pcmcia_conf { + uint pcmc_pbr0; + uint pcmc_por0; + uint pcmc_pbr1; + uint pcmc_por1; + uint pcmc_pbr2; + uint pcmc_por2; + uint pcmc_pbr3; + uint pcmc_por3; + uint pcmc_pbr4; + uint pcmc_por4; + uint pcmc_pbr5; + uint pcmc_por5; + uint pcmc_pbr6; + uint pcmc_por6; + uint pcmc_pbr7; + uint pcmc_por7; + char res1[0x20]; + uint pcmc_pgcra; + uint pcmc_pgcrb; + uint pcmc_pscr; + char res2[4]; + uint pcmc_pipr; + char res3[4]; + uint pcmc_per; + char res4[4]; +} pcmconf8xx_t; + +/* Memory controller registers. +*/ +typedef struct mem_ctlr { + uint memc_br0; + uint memc_or0; + uint memc_br1; + uint memc_or1; + uint memc_br2; + uint memc_or2; + uint memc_br3; + uint memc_or3; + uint memc_br4; + uint memc_or4; + uint memc_br5; + uint memc_or5; + uint memc_br6; + uint memc_or6; + uint memc_br7; + uint memc_or7; + char res1[0x24]; + uint memc_mar; + uint memc_mcr; + char res2[4]; + uint memc_mamr; + uint memc_mbmr; + ushort memc_mstat; + ushort memc_mptpr; + uint memc_mdr; + char res3[0x80]; +} memctl8xx_t; + +/*----------------------------------------------------------------------- + * BR - Memory Controller: Base Register 16-9 + */ +#define BR_BA_MSK 0xffff8000 /* Base Address Mask */ +#define BR_AT_MSK 0x00007000 /* Address Type Mask */ +#define BR_PS_MSK 0x00000c00 /* Port Size Mask */ +#define BR_PS_32 0x00000000 /* 32 bit port size */ +#define BR_PS_16 0x00000800 /* 16 bit port size */ +#define BR_PS_8 0x00000400 /* 8 bit port size */ +#define BR_PARE 0x00000200 /* Parity Enable */ +#define BR_WP 0x00000100 /* Write Protect */ +#define BR_MS_MSK 0x000000c0 /* Machine Select Mask */ +#define BR_MS_GPCM 0x00000000 /* G.P.C.M. Machine Select */ +#define BR_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */ +#define BR_MS_UPMB 0x000000c0 /* U.P.M.B Machine Select */ +#define BR_V 0x00000001 /* Bank Valid */ + +/*----------------------------------------------------------------------- + * OR - Memory Controller: Option Register 16-11 + */ +#define OR_AM_MSK 0xffff8000 /* Address Mask Mask */ +#define OR_ATM_MSK 0x00007000 /* Address Type Mask Mask */ +#define OR_CSNT_SAM 0x00000800 /* Chip Select Negation Time/ Start */ + /* Address Multiplex */ +#define OR_ACS_MSK 0x00000600 /* Address to Chip Select Setup mask */ +#define OR_ACS_DIV1 0x00000000 /* CS is output at the same time */ +#define OR_ACS_DIV4 0x00000400 /* CS is output 1/4 a clock later */ +#define OR_ACS_DIV2 0x00000600 /* CS is output 1/2 a clock later */ +#define OR_G5LA 0x00000400 /* Output #GPL5 on #GPL_A5 */ +#define OR_G5LS 0x00000200 /* Drive #GPL high on falling edge of...*/ +#define OR_BI 0x00000100 /* Burst inhibit */ +#define OR_SCY_MSK 0x000000f0 /* Cycle Length in Clocks */ +#define OR_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */ +#define OR_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */ +#define OR_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */ +#define OR_SCY_3_CLK 0x00000030 /* 3 clock cycles wait states */ +#define OR_SCY_4_CLK 0x00000040 /* 4 clock cycles wait states */ +#define OR_SCY_5_CLK 0x00000050 /* 5 clock cycles wait states */ +#define OR_SCY_6_CLK 0x00000060 /* 6 clock cycles wait states */ +#define OR_SCY_7_CLK 0x00000070 /* 7 clock cycles wait states */ +#define OR_SCY_8_CLK 0x00000080 /* 8 clock cycles wait states */ +#define OR_SCY_9_CLK 0x00000090 /* 9 clock cycles wait states */ +#define OR_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */ +#define OR_SCY_11_CLK 0x000000b0 /* 11 clock cycles wait states */ +#define OR_SCY_12_CLK 0x000000c0 /* 12 clock cycles wait states */ +#define OR_SCY_13_CLK 0x000000d0 /* 13 clock cycles wait states */ +#define OR_SCY_14_CLK 0x000000e0 /* 14 clock cycles wait states */ +#define OR_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */ +#define OR_SETA 0x00000008 /* External Transfer Acknowledge */ +#define OR_TRLX 0x00000004 /* Timing Relaxed */ +#define OR_EHTR 0x00000002 /* Extended Hold Time on Read */ + +/* System Integration Timers. +*/ +typedef struct sys_int_timers { + ushort sit_tbscr; + char res0[0x02]; + uint sit_tbreff0; + uint sit_tbreff1; + char res1[0x14]; + ushort sit_rtcsc; + char res2[0x02]; + uint sit_rtc; + uint sit_rtsec; + uint sit_rtcal; + char res3[0x10]; + ushort sit_piscr; + char res4[2]; + uint sit_pitc; + uint sit_pitr; + char res5[0x34]; +} sit8xx_t; + +#define TBSCR_TBIRQ_MASK ((ushort)0xff00) +#define TBSCR_REFA ((ushort)0x0080) +#define TBSCR_REFB ((ushort)0x0040) +#define TBSCR_REFAE ((ushort)0x0008) +#define TBSCR_REFBE ((ushort)0x0004) +#define TBSCR_TBF ((ushort)0x0002) +#define TBSCR_TBE ((ushort)0x0001) + +#define RTCSC_RTCIRQ_MASK ((ushort)0xff00) +#define RTCSC_SEC ((ushort)0x0080) +#define RTCSC_ALR ((ushort)0x0040) +#define RTCSC_38K ((ushort)0x0010) +#define RTCSC_SIE ((ushort)0x0008) +#define RTCSC_ALE ((ushort)0x0004) +#define RTCSC_RTF ((ushort)0x0002) +#define RTCSC_RTE ((ushort)0x0001) + +#define PISCR_PIRQ_MASK ((ushort)0xff00) +#define PISCR_PS ((ushort)0x0080) +#define PISCR_PIE ((ushort)0x0004) +#define PISCR_PTF ((ushort)0x0002) +#define PISCR_PTE ((ushort)0x0001) + +/* Clocks and Reset. +*/ +typedef struct clk_and_reset { + uint car_sccr; + uint car_plprcr; + uint car_rsr; + char res[0x74]; /* Reserved area */ +} car8xx_t; + +/* System Integration Timers keys. +*/ +typedef struct sitk { + uint sitk_tbscrk; + uint sitk_tbreff0k; + uint sitk_tbreff1k; + uint sitk_tbk; + char res1[0x10]; + uint sitk_rtcsck; + uint sitk_rtck; + uint sitk_rtseck; + uint sitk_rtcalk; + char res2[0x10]; + uint sitk_piscrk; + uint sitk_pitck; + char res3[0x38]; +} sitk8xx_t; + +/* Clocks and reset keys. +*/ +typedef struct cark { + uint cark_sccrk; + uint cark_plprcrk; + uint cark_rsrk; + char res[0x474]; +} cark8xx_t; + +/* The key to unlock registers maintained by keep-alive power. +*/ +#define KAPWR_KEY ((unsigned int)0x55ccaa33) + +/* Video interface. MPC823 Only. +*/ +typedef struct vid823 { + ushort vid_vccr; + ushort res1; + u_char vid_vsr; + u_char res2; + u_char vid_vcmr; + u_char res3; + uint vid_vbcb; + uint res4; + uint vid_vfcr0; + uint vid_vfaa0; + uint vid_vfba0; + uint vid_vfcr1; + uint vid_vfaa1; + uint vid_vfba1; + u_char res5[0x18]; +} vid823_t; + +/* LCD interface. 823 Only. +*/ +typedef struct lcd { + uint lcd_lccr; + uint lcd_lchcr; + uint lcd_lcvcr; + char res1[4]; + uint lcd_lcfaa; + uint lcd_lcfba; + char lcd_lcsr; + char res2[0x7]; +} lcd823_t; + +/* I2C +*/ +typedef struct i2c { + u_char i2c_i2mod; + char res1[3]; + u_char i2c_i2add; + char res2[3]; + u_char i2c_i2brg; + char res3[3]; + u_char i2c_i2com; + char res4[3]; + u_char i2c_i2cer; + char res5[3]; + u_char i2c_i2cmr; + char res6[0x8b]; +} i2c8xx_t; + +/* DMA control/status registers. +*/ +typedef struct sdma_csr { + char res1[4]; + uint sdma_sdar; + u_char sdma_sdsr; + char res3[3]; + u_char sdma_sdmr; + char res4[3]; + u_char sdma_idsr1; + char res5[3]; + u_char sdma_idmr1; + char res6[3]; + u_char sdma_idsr2; + char res7[3]; + u_char sdma_idmr2; + char res8[0x13]; +} sdma8xx_t; + +/* Communication Processor Module Interrupt Controller. +*/ +typedef struct cpm_ic { + ushort cpic_civr; + char res[0xe]; + uint cpic_cicr; + uint cpic_cipr; + uint cpic_cimr; + uint cpic_cisr; +} cpic8xx_t; + +/* Input/Output Port control/status registers. +*/ +typedef struct io_port { + ushort iop_padir; + ushort iop_papar; + ushort iop_paodr; + ushort iop_padat; + char res1[8]; + ushort iop_pcdir; + ushort iop_pcpar; + ushort iop_pcso; + ushort iop_pcdat; + ushort iop_pcint; + char res2[6]; + ushort iop_pddir; + ushort iop_pdpar; + char res3[2]; + ushort iop_pddat; + uint utmode; + char res4[4]; +} iop8xx_t; + +/* Communication Processor Module Timers +*/ +typedef struct cpm_timers { + ushort cpmt_tgcr; + char res1[0xe]; + ushort cpmt_tmr1; + ushort cpmt_tmr2; + ushort cpmt_trr1; + ushort cpmt_trr2; + ushort cpmt_tcr1; + ushort cpmt_tcr2; + ushort cpmt_tcn1; + ushort cpmt_tcn2; + ushort cpmt_tmr3; + ushort cpmt_tmr4; + ushort cpmt_trr3; + ushort cpmt_trr4; + ushort cpmt_tcr3; + ushort cpmt_tcr4; + ushort cpmt_tcn3; + ushort cpmt_tcn4; + ushort cpmt_ter1; + ushort cpmt_ter2; + ushort cpmt_ter3; + ushort cpmt_ter4; + char res2[8]; +} cpmtimer8xx_t; + +/* Finally, the Communication Processor stuff..... +*/ +typedef struct scc { /* Serial communication channels */ + uint scc_gsmrl; + uint scc_gsmrh; + ushort scc_psmr; + char res1[2]; + ushort scc_todr; + ushort scc_dsr; + ushort scc_scce; + char res2[2]; + ushort scc_sccm; + char res3; + u_char scc_sccs; + char res4[8]; +} scc_t; + +typedef struct smc { /* Serial management channels */ + char res1[2]; + ushort smc_smcmr; + char res2[2]; + u_char smc_smce; + char res3[3]; + u_char smc_smcm; + char res4[5]; +} smc_t; + +/* MPC860T Fast Ethernet Controller. It isn't part of the CPM, but + * it fits within the address space. + */ + +typedef struct fec { + uint fec_addr_low; /* lower 32 bits of station address */ + ushort fec_addr_high; /* upper 16 bits of station address */ + ushort res1; /* reserved */ + uint fec_grp_hash_table_high; /* upper 32-bits of hash table */ + uint fec_grp_hash_table_low; /* lower 32-bits of hash table */ + uint fec_r_des_start; /* beginning of Rx descriptor ring */ + uint fec_x_des_start; /* beginning of Tx descriptor ring */ + uint fec_r_buff_size; /* Rx buffer size */ + uint res2[9]; /* reserved */ + uint fec_ecntrl; /* ethernet control register */ + uint fec_ievent; /* interrupt event register */ + uint fec_imask; /* interrupt mask register */ + uint fec_ivec; /* interrupt level and vector status */ + uint fec_r_des_active; /* Rx ring updated flag */ + uint fec_x_des_active; /* Tx ring updated flag */ + uint res3[10]; /* reserved */ + uint fec_mii_data; /* MII data register */ + uint fec_mii_speed; /* MII speed control register */ + uint res4[17]; /* reserved */ + uint fec_r_bound; /* end of RAM (read-only) */ + uint fec_r_fstart; /* Rx FIFO start address */ + uint res5[6]; /* reserved */ + uint fec_x_fstart; /* Tx FIFO start address */ + uint res6[17]; /* reserved */ + uint fec_fun_code; /* fec SDMA function code */ + uint res7[3]; /* reserved */ + uint fec_r_cntrl; /* Rx control register */ + uint fec_r_hash; /* Rx hash register */ + uint res8[14]; /* reserved */ + uint fec_x_cntrl; /* Tx control register */ + uint res9[0x1e]; /* reserved */ +} fec_t; + +/* The FEC and LCD color map share the same address space.... + * I guess we will never see an 823T :-). + */ +union fec_lcd { + fec_t fl_un_fec; + u_char fl_un_cmap[0x200]; +}; + +typedef struct comm_proc { + /* General control and status registers. + */ + ushort cp_cpcr; + u_char res1[2]; + ushort cp_rccr; + u_char res2; + u_char cp_rmds; + u_char res3[4]; + ushort cp_cpmcr1; + ushort cp_cpmcr2; + ushort cp_cpmcr3; + ushort cp_cpmcr4; + u_char res4[2]; + ushort cp_rter; + u_char res5[2]; + ushort cp_rtmr; + u_char res6[0x14]; + + /* Baud rate generators. + */ + uint cp_brgc1; + uint cp_brgc2; + uint cp_brgc3; + uint cp_brgc4; + + /* Serial Communication Channels. + */ + scc_t cp_scc[4]; + + /* Serial Management Channels. + */ + smc_t cp_smc[2]; + + /* Serial Peripheral Interface. + */ + ushort cp_spmode; + u_char res7[4]; + u_char cp_spie; + u_char res8[3]; + u_char cp_spim; + u_char res9[2]; + u_char cp_spcom; + u_char res10[2]; + + /* Parallel Interface Port. + */ + u_char res11[2]; + ushort cp_pipc; + u_char res12[2]; + ushort cp_ptpr; + uint cp_pbdir; + uint cp_pbpar; + u_char res13[2]; + ushort cp_pbodr; + uint cp_pbdat; + + /* Port E - MPC87x/88x only. + */ + uint cp_pedir; + uint cp_pepar; + uint cp_peso; + uint cp_peodr; + uint cp_pedat; + + /* Communications Processor Timing Register - + Contains RMII Timing for the FECs on MPC87x/88x only. + */ + uint cp_cptr; + + /* Serial Interface and Time Slot Assignment. + */ + uint cp_simode; + u_char cp_sigmr; + u_char res15; + u_char cp_sistr; + u_char cp_sicmr; + u_char res16[4]; + uint cp_sicr; + uint cp_sirp; + u_char res17[0xc]; + + /* 256 bytes of MPC823 video controller RAM array. + */ + u_char cp_vcram[0x100]; + u_char cp_siram[0x200]; + + /* The fast ethernet controller is not really part of the CPM, + * but it resides in the address space. + * The LCD color map is also here. + */ + union fec_lcd fl_un; +#define cp_fec fl_un.fl_un_fec +#define lcd_cmap fl_un.fl_un_cmap + char res18[0xE00]; + + /* The DUET family has a second FEC here */ + fec_t cp_fec2; +#define cp_fec1 cp_fec /* consistency macro */ + + /* Dual Ported RAM follows. + * There are many different formats for this memory area + * depending upon the devices used and options chosen. + * Some processors don't have all of it populated. + */ + u_char cp_dpmem[0x1C00]; /* BD / Data / ucode */ + u_char cp_dparam[0x400]; /* Parameter RAM */ +} cpm8xx_t; + +/* Internal memory map. +*/ +typedef struct immap { + sysconf8xx_t im_siu_conf; /* SIU Configuration */ + pcmconf8xx_t im_pcmcia; /* PCMCIA Configuration */ + memctl8xx_t im_memctl; /* Memory Controller */ + sit8xx_t im_sit; /* System integration timers */ + car8xx_t im_clkrst; /* Clocks and reset */ + sitk8xx_t im_sitk; /* Sys int timer keys */ + cark8xx_t im_clkrstk; /* Clocks and reset keys */ + vid823_t im_vid; /* Video (823 only) */ + lcd823_t im_lcd; /* LCD (823 only) */ + i2c8xx_t im_i2c; /* I2C control/status */ + sdma8xx_t im_sdma; /* SDMA control/status */ + cpic8xx_t im_cpic; /* CPM Interrupt Controller */ + iop8xx_t im_ioport; /* IO Port control/status */ + cpmtimer8xx_t im_cpmtimer; /* CPM timers */ + cpm8xx_t im_cpm; /* Communication processor */ +} immap_t; + +#endif /* __IMMAP_8XX__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild new file mode 100644 index 000000000..e1f9b4ea1 --- /dev/null +++ b/arch/powerpc/include/asm/Kbuild @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0 +generated-y += syscall_table_32.h +generated-y += syscall_table_64.h +generated-y += syscall_table_c32.h +generated-y += syscall_table_spu.h +generic-y += export.h +generic-y += kvm_types.h +generic-y += mcs_spinlock.h +generic-y += qrwlock.h +generic-y += vtime.h +generic-y += early_ioremap.h diff --git a/arch/powerpc/include/asm/accounting.h b/arch/powerpc/include/asm/accounting.h new file mode 100644 index 000000000..6d79c3170 --- /dev/null +++ b/arch/powerpc/include/asm/accounting.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Common time accounting prototypes and such for all ppc machines. + */ + +#ifndef __POWERPC_ACCOUNTING_H +#define __POWERPC_ACCOUNTING_H + +/* Stuff for accurate time accounting */ +struct cpu_accounting_data { + /* Accumulated cputime values to flush on ticks*/ + unsigned long utime; + unsigned long stime; +#ifdef CONFIG_ARCH_HAS_SCALED_CPUTIME + unsigned long utime_scaled; + unsigned long stime_scaled; +#endif + unsigned long gtime; + unsigned long hardirq_time; + unsigned long softirq_time; + unsigned long steal_time; + unsigned long idle_time; + /* Internal counters */ + unsigned long starttime; /* TB value snapshot */ + unsigned long starttime_user; /* TB value on exit to usermode */ +#ifdef CONFIG_ARCH_HAS_SCALED_CPUTIME + unsigned long startspurr; /* SPURR value snapshot */ + unsigned long utime_sspurr; /* ->user_time when ->startspurr set */ +#endif +}; + +#endif diff --git a/arch/powerpc/include/asm/agp.h b/arch/powerpc/include/asm/agp.h new file mode 100644 index 000000000..b29b1186f --- /dev/null +++ b/arch/powerpc/include/asm/agp.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_AGP_H +#define _ASM_POWERPC_AGP_H +#ifdef __KERNEL__ + +#include <asm/io.h> + +#define map_page_into_agp(page) +#define unmap_page_from_agp(page) +#define flush_agp_cache() mb() + +/* GATT allocation. Returns/accepts GATT kernel virtual address. */ +#define alloc_gatt_pages(order) \ + ((char *)__get_free_pages(GFP_KERNEL, (order))) +#define free_gatt_pages(table, order) \ + free_pages((unsigned long)(table), (order)) + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_AGP_H */ diff --git a/arch/powerpc/include/asm/archrandom.h b/arch/powerpc/include/asm/archrandom.h new file mode 100644 index 000000000..9a53e2968 --- /dev/null +++ b/arch/powerpc/include/asm/archrandom.h @@ -0,0 +1,49 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_ARCHRANDOM_H +#define _ASM_POWERPC_ARCHRANDOM_H + +#ifdef CONFIG_ARCH_RANDOM + +#include <asm/machdep.h> + +static inline bool __must_check arch_get_random_long(unsigned long *v) +{ + return false; +} + +static inline bool __must_check arch_get_random_int(unsigned int *v) +{ + return false; +} + +static inline bool __must_check arch_get_random_seed_long(unsigned long *v) +{ + if (ppc_md.get_random_seed) + return ppc_md.get_random_seed(v); + + return false; +} + +static inline bool __must_check arch_get_random_seed_int(unsigned int *v) +{ + unsigned long val; + bool rc; + + rc = arch_get_random_seed_long(&val); + if (rc) + *v = val; + + return rc; +} +#endif /* CONFIG_ARCH_RANDOM */ + +#ifdef CONFIG_PPC_POWERNV +int powernv_hwrng_present(void); +int powernv_get_random_long(unsigned long *v); +int powernv_get_random_real_mode(unsigned long *v); +#else +static inline int powernv_hwrng_present(void) { return 0; } +static inline int powernv_get_random_real_mode(unsigned long *v) { return 0; } +#endif + +#endif /* _ASM_POWERPC_ARCHRANDOM_H */ diff --git a/arch/powerpc/include/asm/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h new file mode 100644 index 000000000..19b70c5b5 --- /dev/null +++ b/arch/powerpc/include/asm/asm-compat.h @@ -0,0 +1,62 @@ +#ifndef _ASM_POWERPC_ASM_COMPAT_H +#define _ASM_POWERPC_ASM_COMPAT_H + +#include <asm/asm-const.h> +#include <asm/types.h> +#include <asm/ppc-opcode.h> + +#ifdef __powerpc64__ + +/* operations for longs and pointers */ +#define PPC_LL stringify_in_c(ld) +#define PPC_STL stringify_in_c(std) +#define PPC_STLU stringify_in_c(stdu) +#define PPC_LCMPI stringify_in_c(cmpdi) +#define PPC_LCMPLI stringify_in_c(cmpldi) +#define PPC_LCMP stringify_in_c(cmpd) +#define PPC_LONG stringify_in_c(.8byte) +#define PPC_LONG_ALIGN stringify_in_c(.balign 8) +#define PPC_TLNEI stringify_in_c(tdnei) +#define PPC_LLARX(t, a, b, eh) PPC_LDARX(t, a, b, eh) +#define PPC_STLCX stringify_in_c(stdcx.) +#define PPC_CNTLZL stringify_in_c(cntlzd) +#define PPC_MTOCRF(FXM, RS) MTOCRF((FXM), RS) +#define PPC_LR_STKOFF 16 +#define PPC_MIN_STKFRM 112 + +#ifdef __BIG_ENDIAN__ +#define LHZX_BE stringify_in_c(lhzx) +#define LWZX_BE stringify_in_c(lwzx) +#define LDX_BE stringify_in_c(ldx) +#define STWX_BE stringify_in_c(stwx) +#define STDX_BE stringify_in_c(stdx) +#else +#define LHZX_BE stringify_in_c(lhbrx) +#define LWZX_BE stringify_in_c(lwbrx) +#define LDX_BE stringify_in_c(ldbrx) +#define STWX_BE stringify_in_c(stwbrx) +#define STDX_BE stringify_in_c(stdbrx) +#endif + +#else /* 32-bit */ + +/* operations for longs and pointers */ +#define PPC_LL stringify_in_c(lwz) +#define PPC_STL stringify_in_c(stw) +#define PPC_STLU stringify_in_c(stwu) +#define PPC_LCMPI stringify_in_c(cmpwi) +#define PPC_LCMPLI stringify_in_c(cmplwi) +#define PPC_LCMP stringify_in_c(cmpw) +#define PPC_LONG stringify_in_c(.long) +#define PPC_LONG_ALIGN stringify_in_c(.balign 4) +#define PPC_TLNEI stringify_in_c(twnei) +#define PPC_LLARX(t, a, b, eh) PPC_LWARX(t, a, b, eh) +#define PPC_STLCX stringify_in_c(stwcx.) +#define PPC_CNTLZL stringify_in_c(cntlzw) +#define PPC_MTOCRF stringify_in_c(mtcrf) +#define PPC_LR_STKOFF 4 +#define PPC_MIN_STKFRM 16 + +#endif + +#endif /* _ASM_POWERPC_ASM_COMPAT_H */ diff --git a/arch/powerpc/include/asm/asm-const.h b/arch/powerpc/include/asm/asm-const.h new file mode 100644 index 000000000..0ce2368bd --- /dev/null +++ b/arch/powerpc/include/asm/asm-const.h @@ -0,0 +1,27 @@ +#ifndef _ASM_POWERPC_ASM_CONST_H +#define _ASM_POWERPC_ASM_CONST_H + +#ifdef __ASSEMBLY__ +# define stringify_in_c(...) __VA_ARGS__ +# define ASM_CONST(x) x +#else +/* This version of stringify will deal with commas... */ +# define __stringify_in_c(...) #__VA_ARGS__ +# define stringify_in_c(...) __stringify_in_c(__VA_ARGS__) " " +# define __ASM_CONST(x) x##UL +# define ASM_CONST(x) __ASM_CONST(x) +#endif + +/* + * Inline assembly memory constraint + * + * GCC 4.9 doesn't properly handle pre update memory constraint "m<>" + * + */ +#if defined(GCC_VERSION) && GCC_VERSION < 50000 +#define UPD_CONSTR "" +#else +#define UPD_CONSTR "<>" +#endif + +#endif /* _ASM_POWERPC_ASM_CONST_H */ diff --git a/arch/powerpc/include/asm/asm-offsets.h b/arch/powerpc/include/asm/asm-offsets.h new file mode 100644 index 000000000..d370ee36a --- /dev/null +++ b/arch/powerpc/include/asm/asm-offsets.h @@ -0,0 +1 @@ +#include <generated/asm-offsets.h> diff --git a/arch/powerpc/include/asm/asm-prototypes.h b/arch/powerpc/include/asm/asm-prototypes.h new file mode 100644 index 000000000..d0b832cbb --- /dev/null +++ b/arch/powerpc/include/asm/asm-prototypes.h @@ -0,0 +1,180 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_ASM_PROTOTYPES_H +#define _ASM_POWERPC_ASM_PROTOTYPES_H +/* + * This file is for prototypes of C functions that are only called + * from asm, and any associated variables. + * + * Copyright 2016, Daniel Axtens, IBM Corporation. + */ + +#include <linux/threads.h> +#include <asm/cacheflush.h> +#include <asm/checksum.h> +#include <linux/uaccess.h> +#include <asm/epapr_hcalls.h> +#include <asm/dcr.h> +#include <asm/mmu_context.h> +#include <asm/ultravisor-api.h> + +#include <uapi/asm/ucontext.h> + +/* SMP */ +extern struct task_struct *current_set[NR_CPUS]; +extern struct task_struct *secondary_current; +void start_secondary(void *unused); + +/* kexec */ +struct paca_struct; +struct kimage; +extern struct paca_struct kexec_paca; +void kexec_copy_flush(struct kimage *image); + +/* pseries hcall tracing */ +extern struct static_key hcall_tracepoint_key; +void __trace_hcall_entry(unsigned long opcode, unsigned long *args); +void __trace_hcall_exit(long opcode, long retval, unsigned long *retbuf); + +/* Ultravisor */ +#if defined(CONFIG_PPC_POWERNV) || defined(CONFIG_PPC_SVM) +long ucall_norets(unsigned long opcode, ...); +#else +static inline long ucall_norets(unsigned long opcode, ...) +{ + return U_NOT_AVAILABLE; +} +#endif + +/* OPAL */ +int64_t __opal_call(int64_t a0, int64_t a1, int64_t a2, int64_t a3, + int64_t a4, int64_t a5, int64_t a6, int64_t a7, + int64_t opcode, uint64_t msr); + +/* VMX copying */ +int enter_vmx_usercopy(void); +int exit_vmx_usercopy(void); +int enter_vmx_ops(void); +void *exit_vmx_ops(void *dest); + +/* Traps */ +long machine_check_early(struct pt_regs *regs); +long hmi_exception_realmode(struct pt_regs *regs); +void SMIException(struct pt_regs *regs); +void handle_hmi_exception(struct pt_regs *regs); +void instruction_breakpoint_exception(struct pt_regs *regs); +void RunModeException(struct pt_regs *regs); +void single_step_exception(struct pt_regs *regs); +void program_check_exception(struct pt_regs *regs); +void alignment_exception(struct pt_regs *regs); +void StackOverflow(struct pt_regs *regs); +void stack_overflow_exception(struct pt_regs *regs); +void kernel_fp_unavailable_exception(struct pt_regs *regs); +void altivec_unavailable_exception(struct pt_regs *regs); +void vsx_unavailable_exception(struct pt_regs *regs); +void fp_unavailable_tm(struct pt_regs *regs); +void altivec_unavailable_tm(struct pt_regs *regs); +void vsx_unavailable_tm(struct pt_regs *regs); +void facility_unavailable_exception(struct pt_regs *regs); +void TAUException(struct pt_regs *regs); +void altivec_assist_exception(struct pt_regs *regs); +void unrecoverable_exception(struct pt_regs *regs); +void kernel_bad_stack(struct pt_regs *regs); +void system_reset_exception(struct pt_regs *regs); +void machine_check_exception(struct pt_regs *regs); +void emulation_assist_interrupt(struct pt_regs *regs); +long do_slb_fault(struct pt_regs *regs, unsigned long ea); +void do_bad_slb_fault(struct pt_regs *regs, unsigned long ea, long err); + +/* signals, syscalls and interrupts */ +long sys_swapcontext(struct ucontext __user *old_ctx, + struct ucontext __user *new_ctx, + long ctx_size); +#ifdef CONFIG_PPC32 +long sys_debug_setcontext(struct ucontext __user *ctx, + int ndbg, struct sig_dbg_op __user *dbg); +int +ppc_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, + struct __kernel_old_timeval __user *tvp); +unsigned long __init early_init(unsigned long dt_ptr); +void __init machine_init(u64 dt_ptr); +#endif +long system_call_exception(long r3, long r4, long r5, long r6, long r7, long r8, unsigned long r0, struct pt_regs *regs); +notrace unsigned long syscall_exit_prepare(unsigned long r3, struct pt_regs *regs, long scv); +notrace unsigned long interrupt_exit_user_prepare(struct pt_regs *regs, unsigned long msr); +notrace unsigned long interrupt_exit_kernel_prepare(struct pt_regs *regs, unsigned long msr); + +long ppc_fadvise64_64(int fd, int advice, u32 offset_high, u32 offset_low, + u32 len_high, u32 len_low); +long sys_switch_endian(void); +notrace unsigned int __check_irq_replay(void); +void notrace restore_interrupts(void); + +/* prom_init (OpenFirmware) */ +unsigned long __init prom_init(unsigned long r3, unsigned long r4, + unsigned long pp, + unsigned long r6, unsigned long r7, + unsigned long kbase); + +/* setup */ +void __init early_setup(unsigned long dt_ptr); +void early_setup_secondary(void); + +/* misc runtime */ +extern u64 __bswapdi2(u64); +extern s64 __lshrdi3(s64, int); +extern s64 __ashldi3(s64, int); +extern s64 __ashrdi3(s64, int); +extern int __cmpdi2(s64, s64); +extern int __ucmpdi2(u64, u64); + +/* tracing */ +void _mcount(void); +unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip, + unsigned long sp); + +void pnv_power9_force_smt4_catch(void); +void pnv_power9_force_smt4_release(void); + +/* Transaction memory related */ +void tm_enable(void); +void tm_disable(void); +void tm_abort(uint8_t cause); + +struct kvm_vcpu; +void _kvmppc_restore_tm_pr(struct kvm_vcpu *vcpu, u64 guest_msr); +void _kvmppc_save_tm_pr(struct kvm_vcpu *vcpu, u64 guest_msr); + +/* Patch sites */ +extern s32 patch__call_flush_branch_caches1; +extern s32 patch__call_flush_branch_caches2; +extern s32 patch__call_flush_branch_caches3; +extern s32 patch__flush_count_cache_return; +extern s32 patch__flush_link_stack_return; +extern s32 patch__call_kvm_flush_link_stack; +extern s32 patch__memset_nocache, patch__memcpy_nocache; + +extern long flush_branch_caches; +extern long kvm_flush_link_stack; + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +void kvmppc_save_tm_hv(struct kvm_vcpu *vcpu, u64 msr, bool preserve_nv); +void kvmppc_restore_tm_hv(struct kvm_vcpu *vcpu, u64 msr, bool preserve_nv); +#else +static inline void kvmppc_save_tm_hv(struct kvm_vcpu *vcpu, u64 msr, + bool preserve_nv) { } +static inline void kvmppc_restore_tm_hv(struct kvm_vcpu *vcpu, u64 msr, + bool preserve_nv) { } +#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ + +void kvmhv_save_host_pmu(void); +void kvmhv_load_host_pmu(void); +void kvmhv_save_guest_pmu(struct kvm_vcpu *vcpu, bool pmu_in_use); +void kvmhv_load_guest_pmu(struct kvm_vcpu *vcpu); + +int __kvmhv_vcpu_entry_p9(struct kvm_vcpu *vcpu); + +long kvmppc_h_set_dabr(struct kvm_vcpu *vcpu, unsigned long dabr); +long kvmppc_h_set_xdabr(struct kvm_vcpu *vcpu, unsigned long dabr, + unsigned long dabrx); + +#endif /* _ASM_POWERPC_ASM_PROTOTYPES_H */ diff --git a/arch/powerpc/include/asm/async_tx.h b/arch/powerpc/include/asm/async_tx.h new file mode 100644 index 000000000..a14758426 --- /dev/null +++ b/arch/powerpc/include/asm/async_tx.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2008-2009 DENX Software Engineering. + * + * Author: Yuri Tikhonov <yur@emcraft.com> + */ +#ifndef _ASM_POWERPC_ASYNC_TX_H_ +#define _ASM_POWERPC_ASYNC_TX_H_ + +#if defined(CONFIG_440SPe) || defined(CONFIG_440SP) +extern struct dma_chan * +ppc440spe_async_tx_find_best_channel(enum dma_transaction_type cap, + struct page **dst_lst, int dst_cnt, struct page **src_lst, + int src_cnt, size_t src_sz); + +#define async_tx_find_channel(dep, cap, dst_lst, dst_cnt, src_lst, \ + src_cnt, src_sz) \ + ppc440spe_async_tx_find_best_channel(cap, dst_lst, dst_cnt, src_lst, \ + src_cnt, src_sz) +#else + +#define async_tx_find_channel(dep, type, dst, dst_count, src, src_count, len) \ + __async_tx_find_channel(dep, type) + +struct dma_chan * +__async_tx_find_channel(struct async_submit_ctl *submit, + enum dma_transaction_type tx_type); + +#endif + +#endif diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h new file mode 100644 index 000000000..8a55eb8cc --- /dev/null +++ b/arch/powerpc/include/asm/atomic.h @@ -0,0 +1,576 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_ATOMIC_H_ +#define _ASM_POWERPC_ATOMIC_H_ + +/* + * PowerPC atomic operations + */ + +#ifdef __KERNEL__ +#include <linux/types.h> +#include <asm/cmpxchg.h> +#include <asm/barrier.h> + +/* + * Since *_return_relaxed and {cmp}xchg_relaxed are implemented with + * a "bne-" instruction at the end, so an isync is enough as a acquire barrier + * on the platform without lwsync. + */ +#define __atomic_acquire_fence() \ + __asm__ __volatile__(PPC_ACQUIRE_BARRIER "" : : : "memory") + +#define __atomic_release_fence() \ + __asm__ __volatile__(PPC_RELEASE_BARRIER "" : : : "memory") + +static __inline__ int atomic_read(const atomic_t *v) +{ + int t; + + __asm__ __volatile__("lwz%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter)); + + return t; +} + +static __inline__ void atomic_set(atomic_t *v, int i) +{ + __asm__ __volatile__("stw%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i)); +} + +#define ATOMIC_OP(op, asm_op) \ +static __inline__ void atomic_##op(int a, atomic_t *v) \ +{ \ + int t; \ + \ + __asm__ __volatile__( \ +"1: lwarx %0,0,%3 # atomic_" #op "\n" \ + #asm_op " %0,%2,%0\n" \ +" stwcx. %0,0,%3 \n" \ +" bne- 1b\n" \ + : "=&r" (t), "+m" (v->counter) \ + : "r" (a), "r" (&v->counter) \ + : "cc"); \ +} \ + +#define ATOMIC_OP_RETURN_RELAXED(op, asm_op) \ +static inline int atomic_##op##_return_relaxed(int a, atomic_t *v) \ +{ \ + int t; \ + \ + __asm__ __volatile__( \ +"1: lwarx %0,0,%3 # atomic_" #op "_return_relaxed\n" \ + #asm_op " %0,%2,%0\n" \ +" stwcx. %0,0,%3\n" \ +" bne- 1b\n" \ + : "=&r" (t), "+m" (v->counter) \ + : "r" (a), "r" (&v->counter) \ + : "cc"); \ + \ + return t; \ +} + +#define ATOMIC_FETCH_OP_RELAXED(op, asm_op) \ +static inline int atomic_fetch_##op##_relaxed(int a, atomic_t *v) \ +{ \ + int res, t; \ + \ + __asm__ __volatile__( \ +"1: lwarx %0,0,%4 # atomic_fetch_" #op "_relaxed\n" \ + #asm_op " %1,%3,%0\n" \ +" stwcx. %1,0,%4\n" \ +" bne- 1b\n" \ + : "=&r" (res), "=&r" (t), "+m" (v->counter) \ + : "r" (a), "r" (&v->counter) \ + : "cc"); \ + \ + return res; \ +} + +#define ATOMIC_OPS(op, asm_op) \ + ATOMIC_OP(op, asm_op) \ + ATOMIC_OP_RETURN_RELAXED(op, asm_op) \ + ATOMIC_FETCH_OP_RELAXED(op, asm_op) + +ATOMIC_OPS(add, add) +ATOMIC_OPS(sub, subf) + +#define atomic_add_return_relaxed atomic_add_return_relaxed +#define atomic_sub_return_relaxed atomic_sub_return_relaxed + +#define atomic_fetch_add_relaxed atomic_fetch_add_relaxed +#define atomic_fetch_sub_relaxed atomic_fetch_sub_relaxed + +#undef ATOMIC_OPS +#define ATOMIC_OPS(op, asm_op) \ + ATOMIC_OP(op, asm_op) \ + ATOMIC_FETCH_OP_RELAXED(op, asm_op) + +ATOMIC_OPS(and, and) +ATOMIC_OPS(or, or) +ATOMIC_OPS(xor, xor) + +#define atomic_fetch_and_relaxed atomic_fetch_and_relaxed +#define atomic_fetch_or_relaxed atomic_fetch_or_relaxed +#define atomic_fetch_xor_relaxed atomic_fetch_xor_relaxed + +#undef ATOMIC_OPS +#undef ATOMIC_FETCH_OP_RELAXED +#undef ATOMIC_OP_RETURN_RELAXED +#undef ATOMIC_OP + +static __inline__ void atomic_inc(atomic_t *v) +{ + int t; + + __asm__ __volatile__( +"1: lwarx %0,0,%2 # atomic_inc\n\ + addic %0,%0,1\n" +" stwcx. %0,0,%2 \n\ + bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (&v->counter) + : "cc", "xer"); +} +#define atomic_inc atomic_inc + +static __inline__ int atomic_inc_return_relaxed(atomic_t *v) +{ + int t; + + __asm__ __volatile__( +"1: lwarx %0,0,%2 # atomic_inc_return_relaxed\n" +" addic %0,%0,1\n" +" stwcx. %0,0,%2\n" +" bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (&v->counter) + : "cc", "xer"); + + return t; +} + +static __inline__ void atomic_dec(atomic_t *v) +{ + int t; + + __asm__ __volatile__( +"1: lwarx %0,0,%2 # atomic_dec\n\ + addic %0,%0,-1\n" +" stwcx. %0,0,%2\n\ + bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (&v->counter) + : "cc", "xer"); +} +#define atomic_dec atomic_dec + +static __inline__ int atomic_dec_return_relaxed(atomic_t *v) +{ + int t; + + __asm__ __volatile__( +"1: lwarx %0,0,%2 # atomic_dec_return_relaxed\n" +" addic %0,%0,-1\n" +" stwcx. %0,0,%2\n" +" bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (&v->counter) + : "cc", "xer"); + + return t; +} + +#define atomic_inc_return_relaxed atomic_inc_return_relaxed +#define atomic_dec_return_relaxed atomic_dec_return_relaxed + +#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) +#define atomic_cmpxchg_relaxed(v, o, n) \ + cmpxchg_relaxed(&((v)->counter), (o), (n)) +#define atomic_cmpxchg_acquire(v, o, n) \ + cmpxchg_acquire(&((v)->counter), (o), (n)) + +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) +#define atomic_xchg_relaxed(v, new) xchg_relaxed(&((v)->counter), (new)) + +/* + * Don't want to override the generic atomic_try_cmpxchg_acquire, because + * we add a lock hint to the lwarx, which may not be wanted for the + * _acquire case (and is not used by the other _acquire variants so it + * would be a surprise). + */ +static __always_inline bool +atomic_try_cmpxchg_lock(atomic_t *v, int *old, int new) +{ + int r, o = *old; + + __asm__ __volatile__ ( +"1:\t" PPC_LWARX(%0,0,%2,1) " # atomic_try_cmpxchg_acquire \n" +" cmpw 0,%0,%3 \n" +" bne- 2f \n" +" stwcx. %4,0,%2 \n" +" bne- 1b \n" +"\t" PPC_ACQUIRE_BARRIER " \n" +"2: \n" + : "=&r" (r), "+m" (v->counter) + : "r" (&v->counter), "r" (o), "r" (new) + : "cr0", "memory"); + + if (unlikely(r != o)) + *old = r; + return likely(r == o); +} + +/** + * atomic_fetch_add_unless - add unless the number is a given value + * @v: pointer of type atomic_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @v, so long as it was not @u. + * Returns the old value of @v. + */ +static __inline__ int atomic_fetch_add_unless(atomic_t *v, int a, int u) +{ + int t; + + __asm__ __volatile__ ( + PPC_ATOMIC_ENTRY_BARRIER +"1: lwarx %0,0,%1 # atomic_fetch_add_unless\n\ + cmpw 0,%0,%3 \n\ + beq 2f \n\ + add %0,%2,%0 \n" +" stwcx. %0,0,%1 \n\ + bne- 1b \n" + PPC_ATOMIC_EXIT_BARRIER +" subf %0,%2,%0 \n\ +2:" + : "=&r" (t) + : "r" (&v->counter), "r" (a), "r" (u) + : "cc", "memory"); + + return t; +} +#define atomic_fetch_add_unless atomic_fetch_add_unless + +/** + * atomic_inc_not_zero - increment unless the number is zero + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1, so long as @v is non-zero. + * Returns non-zero if @v was non-zero, and zero otherwise. + */ +static __inline__ int atomic_inc_not_zero(atomic_t *v) +{ + int t1, t2; + + __asm__ __volatile__ ( + PPC_ATOMIC_ENTRY_BARRIER +"1: lwarx %0,0,%2 # atomic_inc_not_zero\n\ + cmpwi 0,%0,0\n\ + beq- 2f\n\ + addic %1,%0,1\n" +" stwcx. %1,0,%2\n\ + bne- 1b\n" + PPC_ATOMIC_EXIT_BARRIER + "\n\ +2:" + : "=&r" (t1), "=&r" (t2) + : "r" (&v->counter) + : "cc", "xer", "memory"); + + return t1; +} +#define atomic_inc_not_zero(v) atomic_inc_not_zero((v)) + +/* + * Atomically test *v and decrement if it is greater than 0. + * The function returns the old value of *v minus 1, even if + * the atomic variable, v, was not decremented. + */ +static __inline__ int atomic_dec_if_positive(atomic_t *v) +{ + int t; + + __asm__ __volatile__( + PPC_ATOMIC_ENTRY_BARRIER +"1: lwarx %0,0,%1 # atomic_dec_if_positive\n\ + cmpwi %0,1\n\ + addi %0,%0,-1\n\ + blt- 2f\n" +" stwcx. %0,0,%1\n\ + bne- 1b" + PPC_ATOMIC_EXIT_BARRIER + "\n\ +2:" : "=&b" (t) + : "r" (&v->counter) + : "cc", "memory"); + + return t; +} +#define atomic_dec_if_positive atomic_dec_if_positive + +#ifdef __powerpc64__ + +#define ATOMIC64_INIT(i) { (i) } + +static __inline__ s64 atomic64_read(const atomic64_t *v) +{ + s64 t; + + __asm__ __volatile__("ld%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter)); + + return t; +} + +static __inline__ void atomic64_set(atomic64_t *v, s64 i) +{ + __asm__ __volatile__("std%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i)); +} + +#define ATOMIC64_OP(op, asm_op) \ +static __inline__ void atomic64_##op(s64 a, atomic64_t *v) \ +{ \ + s64 t; \ + \ + __asm__ __volatile__( \ +"1: ldarx %0,0,%3 # atomic64_" #op "\n" \ + #asm_op " %0,%2,%0\n" \ +" stdcx. %0,0,%3 \n" \ +" bne- 1b\n" \ + : "=&r" (t), "+m" (v->counter) \ + : "r" (a), "r" (&v->counter) \ + : "cc"); \ +} + +#define ATOMIC64_OP_RETURN_RELAXED(op, asm_op) \ +static inline s64 \ +atomic64_##op##_return_relaxed(s64 a, atomic64_t *v) \ +{ \ + s64 t; \ + \ + __asm__ __volatile__( \ +"1: ldarx %0,0,%3 # atomic64_" #op "_return_relaxed\n" \ + #asm_op " %0,%2,%0\n" \ +" stdcx. %0,0,%3\n" \ +" bne- 1b\n" \ + : "=&r" (t), "+m" (v->counter) \ + : "r" (a), "r" (&v->counter) \ + : "cc"); \ + \ + return t; \ +} + +#define ATOMIC64_FETCH_OP_RELAXED(op, asm_op) \ +static inline s64 \ +atomic64_fetch_##op##_relaxed(s64 a, atomic64_t *v) \ +{ \ + s64 res, t; \ + \ + __asm__ __volatile__( \ +"1: ldarx %0,0,%4 # atomic64_fetch_" #op "_relaxed\n" \ + #asm_op " %1,%3,%0\n" \ +" stdcx. %1,0,%4\n" \ +" bne- 1b\n" \ + : "=&r" (res), "=&r" (t), "+m" (v->counter) \ + : "r" (a), "r" (&v->counter) \ + : "cc"); \ + \ + return res; \ +} + +#define ATOMIC64_OPS(op, asm_op) \ + ATOMIC64_OP(op, asm_op) \ + ATOMIC64_OP_RETURN_RELAXED(op, asm_op) \ + ATOMIC64_FETCH_OP_RELAXED(op, asm_op) + +ATOMIC64_OPS(add, add) +ATOMIC64_OPS(sub, subf) + +#define atomic64_add_return_relaxed atomic64_add_return_relaxed +#define atomic64_sub_return_relaxed atomic64_sub_return_relaxed + +#define atomic64_fetch_add_relaxed atomic64_fetch_add_relaxed +#define atomic64_fetch_sub_relaxed atomic64_fetch_sub_relaxed + +#undef ATOMIC64_OPS +#define ATOMIC64_OPS(op, asm_op) \ + ATOMIC64_OP(op, asm_op) \ + ATOMIC64_FETCH_OP_RELAXED(op, asm_op) + +ATOMIC64_OPS(and, and) +ATOMIC64_OPS(or, or) +ATOMIC64_OPS(xor, xor) + +#define atomic64_fetch_and_relaxed atomic64_fetch_and_relaxed +#define atomic64_fetch_or_relaxed atomic64_fetch_or_relaxed +#define atomic64_fetch_xor_relaxed atomic64_fetch_xor_relaxed + +#undef ATOPIC64_OPS +#undef ATOMIC64_FETCH_OP_RELAXED +#undef ATOMIC64_OP_RETURN_RELAXED +#undef ATOMIC64_OP + +static __inline__ void atomic64_inc(atomic64_t *v) +{ + s64 t; + + __asm__ __volatile__( +"1: ldarx %0,0,%2 # atomic64_inc\n\ + addic %0,%0,1\n\ + stdcx. %0,0,%2 \n\ + bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (&v->counter) + : "cc", "xer"); +} +#define atomic64_inc atomic64_inc + +static __inline__ s64 atomic64_inc_return_relaxed(atomic64_t *v) +{ + s64 t; + + __asm__ __volatile__( +"1: ldarx %0,0,%2 # atomic64_inc_return_relaxed\n" +" addic %0,%0,1\n" +" stdcx. %0,0,%2\n" +" bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (&v->counter) + : "cc", "xer"); + + return t; +} + +static __inline__ void atomic64_dec(atomic64_t *v) +{ + s64 t; + + __asm__ __volatile__( +"1: ldarx %0,0,%2 # atomic64_dec\n\ + addic %0,%0,-1\n\ + stdcx. %0,0,%2\n\ + bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (&v->counter) + : "cc", "xer"); +} +#define atomic64_dec atomic64_dec + +static __inline__ s64 atomic64_dec_return_relaxed(atomic64_t *v) +{ + s64 t; + + __asm__ __volatile__( +"1: ldarx %0,0,%2 # atomic64_dec_return_relaxed\n" +" addic %0,%0,-1\n" +" stdcx. %0,0,%2\n" +" bne- 1b" + : "=&r" (t), "+m" (v->counter) + : "r" (&v->counter) + : "cc", "xer"); + + return t; +} + +#define atomic64_inc_return_relaxed atomic64_inc_return_relaxed +#define atomic64_dec_return_relaxed atomic64_dec_return_relaxed + +/* + * Atomically test *v and decrement if it is greater than 0. + * The function returns the old value of *v minus 1. + */ +static __inline__ s64 atomic64_dec_if_positive(atomic64_t *v) +{ + s64 t; + + __asm__ __volatile__( + PPC_ATOMIC_ENTRY_BARRIER +"1: ldarx %0,0,%1 # atomic64_dec_if_positive\n\ + addic. %0,%0,-1\n\ + blt- 2f\n\ + stdcx. %0,0,%1\n\ + bne- 1b" + PPC_ATOMIC_EXIT_BARRIER + "\n\ +2:" : "=&r" (t) + : "r" (&v->counter) + : "cc", "xer", "memory"); + + return t; +} +#define atomic64_dec_if_positive atomic64_dec_if_positive + +#define atomic64_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) +#define atomic64_cmpxchg_relaxed(v, o, n) \ + cmpxchg_relaxed(&((v)->counter), (o), (n)) +#define atomic64_cmpxchg_acquire(v, o, n) \ + cmpxchg_acquire(&((v)->counter), (o), (n)) + +#define atomic64_xchg(v, new) (xchg(&((v)->counter), new)) +#define atomic64_xchg_relaxed(v, new) xchg_relaxed(&((v)->counter), (new)) + +/** + * atomic64_fetch_add_unless - add unless the number is a given value + * @v: pointer of type atomic64_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @v, so long as it was not @u. + * Returns the old value of @v. + */ +static __inline__ s64 atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u) +{ + s64 t; + + __asm__ __volatile__ ( + PPC_ATOMIC_ENTRY_BARRIER +"1: ldarx %0,0,%1 # atomic64_fetch_add_unless\n\ + cmpd 0,%0,%3 \n\ + beq 2f \n\ + add %0,%2,%0 \n" +" stdcx. %0,0,%1 \n\ + bne- 1b \n" + PPC_ATOMIC_EXIT_BARRIER +" subf %0,%2,%0 \n\ +2:" + : "=&r" (t) + : "r" (&v->counter), "r" (a), "r" (u) + : "cc", "memory"); + + return t; +} +#define atomic64_fetch_add_unless atomic64_fetch_add_unless + +/** + * atomic_inc64_not_zero - increment unless the number is zero + * @v: pointer of type atomic64_t + * + * Atomically increments @v by 1, so long as @v is non-zero. + * Returns non-zero if @v was non-zero, and zero otherwise. + */ +static __inline__ int atomic64_inc_not_zero(atomic64_t *v) +{ + s64 t1, t2; + + __asm__ __volatile__ ( + PPC_ATOMIC_ENTRY_BARRIER +"1: ldarx %0,0,%2 # atomic64_inc_not_zero\n\ + cmpdi 0,%0,0\n\ + beq- 2f\n\ + addic %1,%0,1\n\ + stdcx. %1,0,%2\n\ + bne- 1b\n" + PPC_ATOMIC_EXIT_BARRIER + "\n\ +2:" + : "=&r" (t1), "=&r" (t2) + : "r" (&v->counter) + : "cc", "xer", "memory"); + + return t1 != 0; +} +#define atomic64_inc_not_zero(v) atomic64_inc_not_zero((v)) + +#endif /* __powerpc64__ */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_ATOMIC_H_ */ diff --git a/arch/powerpc/include/asm/backlight.h b/arch/powerpc/include/asm/backlight.h new file mode 100644 index 000000000..1b5eab62e --- /dev/null +++ b/arch/powerpc/include/asm/backlight.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Routines for handling backlight control on PowerBooks + * + * For now, implementation resides in + * arch/powerpc/platforms/powermac/backlight.c + * + */ +#ifndef __ASM_POWERPC_BACKLIGHT_H +#define __ASM_POWERPC_BACKLIGHT_H +#ifdef __KERNEL__ + +#include <linux/fb.h> +#include <linux/mutex.h> + +/* For locking instructions, see the implementation file */ +extern struct backlight_device *pmac_backlight; +extern struct mutex pmac_backlight_mutex; + +extern int pmac_backlight_curve_lookup(struct fb_info *info, int value); + +extern int pmac_has_backlight_type(const char *type); + +extern void pmac_backlight_key(int direction); +static inline void pmac_backlight_key_up(void) +{ + pmac_backlight_key(0); +} +static inline void pmac_backlight_key_down(void) +{ + pmac_backlight_key(1); +} + +extern void pmac_backlight_set_legacy_brightness_pmu(int brightness); +extern int pmac_backlight_set_legacy_brightness(int brightness); +extern int pmac_backlight_get_legacy_brightness(void); + +extern void pmac_backlight_enable(void); +extern void pmac_backlight_disable(void); + +#endif /* __KERNEL__ */ +#endif diff --git a/arch/powerpc/include/asm/barrier.h b/arch/powerpc/include/asm/barrier.h new file mode 100644 index 000000000..8c14f84a8 --- /dev/null +++ b/arch/powerpc/include/asm/barrier.h @@ -0,0 +1,133 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> + */ +#ifndef _ASM_POWERPC_BARRIER_H +#define _ASM_POWERPC_BARRIER_H + +#include <asm/asm-const.h> + +#ifndef __ASSEMBLY__ +#include <asm/ppc-opcode.h> +#endif + +/* + * Memory barrier. + * The sync instruction guarantees that all memory accesses initiated + * by this processor have been performed (with respect to all other + * mechanisms that access memory). The eieio instruction is a barrier + * providing an ordering (separately) for (a) cacheable stores and (b) + * loads and stores to non-cacheable memory (e.g. I/O devices). + * + * mb() prevents loads and stores being reordered across this point. + * rmb() prevents loads being reordered across this point. + * wmb() prevents stores being reordered across this point. + * + * *mb() variants without smp_ prefix must order all types of memory + * operations with one another. sync is the only instruction sufficient + * to do this. + * + * For the smp_ barriers, ordering is for cacheable memory operations + * only. We have to use the sync instruction for smp_mb(), since lwsync + * doesn't order loads with respect to previous stores. Lwsync can be + * used for smp_rmb() and smp_wmb(). + * + * However, on CPUs that don't support lwsync, lwsync actually maps to a + * heavy-weight sync, so smp_wmb() can be a lighter-weight eieio. + */ +#define mb() __asm__ __volatile__ ("sync" : : : "memory") +#define rmb() __asm__ __volatile__ ("sync" : : : "memory") +#define wmb() __asm__ __volatile__ ("sync" : : : "memory") + +/* The sub-arch has lwsync */ +#if defined(__powerpc64__) || defined(CONFIG_PPC_E500MC) +# define SMPWMB LWSYNC +#else +# define SMPWMB eieio +#endif + +/* clang defines this macro for a builtin, which will not work with runtime patching */ +#undef __lwsync +#define __lwsync() __asm__ __volatile__ (stringify_in_c(LWSYNC) : : :"memory") +#define dma_rmb() __lwsync() +#define dma_wmb() __asm__ __volatile__ (stringify_in_c(SMPWMB) : : :"memory") + +#define __smp_lwsync() __lwsync() + +#define __smp_mb() mb() +#define __smp_rmb() __lwsync() +#define __smp_wmb() __asm__ __volatile__ (stringify_in_c(SMPWMB) : : :"memory") + +/* + * This is a barrier which prevents following instructions from being + * started until the value of the argument x is known. For example, if + * x is a variable loaded from memory, this prevents following + * instructions from being executed until the load has been performed. + */ +#define data_barrier(x) \ + asm volatile("twi 0,%0,0; isync" : : "r" (x) : "memory"); + +#define __smp_store_release(p, v) \ +do { \ + compiletime_assert_atomic_type(*p); \ + __smp_lwsync(); \ + WRITE_ONCE(*p, v); \ +} while (0) + +#define __smp_load_acquire(p) \ +({ \ + typeof(*p) ___p1 = READ_ONCE(*p); \ + compiletime_assert_atomic_type(*p); \ + __smp_lwsync(); \ + ___p1; \ +}) + +#ifdef CONFIG_PPC64 +#define smp_cond_load_relaxed(ptr, cond_expr) ({ \ + typeof(ptr) __PTR = (ptr); \ + __unqual_scalar_typeof(*ptr) VAL; \ + VAL = READ_ONCE(*__PTR); \ + if (unlikely(!(cond_expr))) { \ + spin_begin(); \ + do { \ + VAL = READ_ONCE(*__PTR); \ + } while (!(cond_expr)); \ + spin_end(); \ + } \ + (typeof(*ptr))VAL; \ +}) +#endif + +#ifdef CONFIG_PPC_BOOK3S_64 +#define NOSPEC_BARRIER_SLOT nop +#elif defined(CONFIG_PPC_FSL_BOOK3E) +#define NOSPEC_BARRIER_SLOT nop; nop +#endif + +#ifdef CONFIG_PPC_BARRIER_NOSPEC +/* + * Prevent execution of subsequent instructions until preceding branches have + * been fully resolved and are no longer executing speculatively. + */ +#define barrier_nospec_asm NOSPEC_BARRIER_FIXUP_SECTION; NOSPEC_BARRIER_SLOT + +// This also acts as a compiler barrier due to the memory clobber. +#define barrier_nospec() asm (stringify_in_c(barrier_nospec_asm) ::: "memory") + +#else /* !CONFIG_PPC_BARRIER_NOSPEC */ +#define barrier_nospec_asm +#define barrier_nospec() +#endif /* CONFIG_PPC_BARRIER_NOSPEC */ + +/* + * pmem_wmb() ensures that all stores for which the modification + * are written to persistent storage by preceding dcbfps/dcbstps + * instructions have updated persistent storage before any data + * access or data transfer caused by subsequent instructions is + * initiated. + */ +#define pmem_wmb() __asm__ __volatile__(PPC_PHWSYNC ::: "memory") + +#include <asm-generic/barrier.h> + +#endif /* _ASM_POWERPC_BARRIER_H */ diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h new file mode 100644 index 000000000..299ab3350 --- /dev/null +++ b/arch/powerpc/include/asm/bitops.h @@ -0,0 +1,275 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * PowerPC atomic bit operations. + * + * Merged version by David Gibson <david@gibson.dropbear.id.au>. + * Based on ppc64 versions by: Dave Engebretsen, Todd Inglett, Don + * Reed, Pat McCarthy, Peter Bergner, Anton Blanchard. They + * originally took it from the ppc32 code. + * + * Within a word, bits are numbered LSB first. Lot's of places make + * this assumption by directly testing bits with (val & (1<<nr)). + * This can cause confusion for large (> 1 word) bitmaps on a + * big-endian system because, unlike little endian, the number of each + * bit depends on the word size. + * + * The bitop functions are defined to work on unsigned longs, so for a + * ppc64 system the bits end up numbered: + * |63..............0|127............64|191...........128|255...........192| + * and on ppc32: + * |31.....0|63....32|95....64|127...96|159..128|191..160|223..192|255..224| + * + * There are a few little-endian macros used mostly for filesystem + * bitmaps, these work on similar bit arrays layouts, but + * byte-oriented: + * |7...0|15...8|23...16|31...24|39...32|47...40|55...48|63...56| + * + * The main difference is that bit 3-5 (64b) or 3-4 (32b) in the bit + * number field needs to be reversed compared to the big-endian bit + * fields. This can be achieved by XOR with 0x38 (64b) or 0x18 (32b). + */ + +#ifndef _ASM_POWERPC_BITOPS_H +#define _ASM_POWERPC_BITOPS_H + +#ifdef __KERNEL__ + +#ifndef _LINUX_BITOPS_H +#error only <linux/bitops.h> can be included directly +#endif + +#include <linux/compiler.h> +#include <asm/asm-compat.h> +#include <asm/synch.h> + +/* PPC bit number conversion */ +#define PPC_BITLSHIFT(be) (BITS_PER_LONG - 1 - (be)) +#define PPC_BIT(bit) (1UL << PPC_BITLSHIFT(bit)) +#define PPC_BITMASK(bs, be) ((PPC_BIT(bs) - PPC_BIT(be)) | PPC_BIT(bs)) + +/* Put a PPC bit into a "normal" bit position */ +#define PPC_BITEXTRACT(bits, ppc_bit, dst_bit) \ + ((((bits) >> PPC_BITLSHIFT(ppc_bit)) & 1) << (dst_bit)) + +#define PPC_BITLSHIFT32(be) (32 - 1 - (be)) +#define PPC_BIT32(bit) (1UL << PPC_BITLSHIFT32(bit)) +#define PPC_BITMASK32(bs, be) ((PPC_BIT32(bs) - PPC_BIT32(be))|PPC_BIT32(bs)) + +#define PPC_BITLSHIFT8(be) (8 - 1 - (be)) +#define PPC_BIT8(bit) (1UL << PPC_BITLSHIFT8(bit)) +#define PPC_BITMASK8(bs, be) ((PPC_BIT8(bs) - PPC_BIT8(be))|PPC_BIT8(bs)) + +#include <asm/barrier.h> + +/* Macro for generating the ***_bits() functions */ +#define DEFINE_BITOP(fn, op, prefix) \ +static inline void fn(unsigned long mask, \ + volatile unsigned long *_p) \ +{ \ + unsigned long old; \ + unsigned long *p = (unsigned long *)_p; \ + __asm__ __volatile__ ( \ + prefix \ +"1:" PPC_LLARX(%0,0,%3,0) "\n" \ + stringify_in_c(op) "%0,%0,%2\n" \ + PPC_STLCX "%0,0,%3\n" \ + "bne- 1b\n" \ + : "=&r" (old), "+m" (*p) \ + : "r" (mask), "r" (p) \ + : "cc", "memory"); \ +} + +DEFINE_BITOP(set_bits, or, "") +DEFINE_BITOP(clear_bits, andc, "") +DEFINE_BITOP(clear_bits_unlock, andc, PPC_RELEASE_BARRIER) +DEFINE_BITOP(change_bits, xor, "") + +static inline void arch_set_bit(int nr, volatile unsigned long *addr) +{ + set_bits(BIT_MASK(nr), addr + BIT_WORD(nr)); +} + +static inline void arch_clear_bit(int nr, volatile unsigned long *addr) +{ + clear_bits(BIT_MASK(nr), addr + BIT_WORD(nr)); +} + +static inline void arch_clear_bit_unlock(int nr, volatile unsigned long *addr) +{ + clear_bits_unlock(BIT_MASK(nr), addr + BIT_WORD(nr)); +} + +static inline void arch_change_bit(int nr, volatile unsigned long *addr) +{ + change_bits(BIT_MASK(nr), addr + BIT_WORD(nr)); +} + +/* Like DEFINE_BITOP(), with changes to the arguments to 'op' and the output + * operands. */ +#define DEFINE_TESTOP(fn, op, prefix, postfix, eh) \ +static inline unsigned long fn( \ + unsigned long mask, \ + volatile unsigned long *_p) \ +{ \ + unsigned long old, t; \ + unsigned long *p = (unsigned long *)_p; \ + __asm__ __volatile__ ( \ + prefix \ +"1:" PPC_LLARX(%0,0,%3,eh) "\n" \ + stringify_in_c(op) "%1,%0,%2\n" \ + PPC_STLCX "%1,0,%3\n" \ + "bne- 1b\n" \ + postfix \ + : "=&r" (old), "=&r" (t) \ + : "r" (mask), "r" (p) \ + : "cc", "memory"); \ + return (old & mask); \ +} + +DEFINE_TESTOP(test_and_set_bits, or, PPC_ATOMIC_ENTRY_BARRIER, + PPC_ATOMIC_EXIT_BARRIER, 0) +DEFINE_TESTOP(test_and_set_bits_lock, or, "", + PPC_ACQUIRE_BARRIER, 1) +DEFINE_TESTOP(test_and_clear_bits, andc, PPC_ATOMIC_ENTRY_BARRIER, + PPC_ATOMIC_EXIT_BARRIER, 0) +DEFINE_TESTOP(test_and_change_bits, xor, PPC_ATOMIC_ENTRY_BARRIER, + PPC_ATOMIC_EXIT_BARRIER, 0) + +static inline int arch_test_and_set_bit(unsigned long nr, + volatile unsigned long *addr) +{ + return test_and_set_bits(BIT_MASK(nr), addr + BIT_WORD(nr)) != 0; +} + +static inline int arch_test_and_set_bit_lock(unsigned long nr, + volatile unsigned long *addr) +{ + return test_and_set_bits_lock(BIT_MASK(nr), + addr + BIT_WORD(nr)) != 0; +} + +static inline int arch_test_and_clear_bit(unsigned long nr, + volatile unsigned long *addr) +{ + return test_and_clear_bits(BIT_MASK(nr), addr + BIT_WORD(nr)) != 0; +} + +static inline int arch_test_and_change_bit(unsigned long nr, + volatile unsigned long *addr) +{ + return test_and_change_bits(BIT_MASK(nr), addr + BIT_WORD(nr)) != 0; +} + +#ifdef CONFIG_PPC64 +static inline unsigned long +clear_bit_unlock_return_word(int nr, volatile unsigned long *addr) +{ + unsigned long old, t; + unsigned long *p = (unsigned long *)addr + BIT_WORD(nr); + unsigned long mask = BIT_MASK(nr); + + __asm__ __volatile__ ( + PPC_RELEASE_BARRIER +"1:" PPC_LLARX(%0,0,%3,0) "\n" + "andc %1,%0,%2\n" + PPC_STLCX "%1,0,%3\n" + "bne- 1b\n" + : "=&r" (old), "=&r" (t) + : "r" (mask), "r" (p) + : "cc", "memory"); + + return old; +} + +/* + * This is a special function for mm/filemap.c + * Bit 7 corresponds to PG_waiters. + */ +#define arch_clear_bit_unlock_is_negative_byte(nr, addr) \ + (clear_bit_unlock_return_word(nr, addr) & BIT_MASK(7)) + +#endif /* CONFIG_PPC64 */ + +#include <asm-generic/bitops/non-atomic.h> + +static inline void arch___clear_bit_unlock(int nr, volatile unsigned long *addr) +{ + __asm__ __volatile__(PPC_RELEASE_BARRIER "" ::: "memory"); + __clear_bit(nr, addr); +} + +/* + * Return the zero-based bit position (LE, not IBM bit numbering) of + * the most significant 1-bit in a double word. + */ +#define __ilog2(x) ilog2(x) + +#include <asm-generic/bitops/ffz.h> + +#include <asm-generic/bitops/builtin-__ffs.h> + +#include <asm-generic/bitops/builtin-ffs.h> + +/* + * fls: find last (most-significant) bit set. + * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. + */ +static inline int fls(unsigned int x) +{ + int lz; + + if (__builtin_constant_p(x)) + return x ? 32 - __builtin_clz(x) : 0; + asm("cntlzw %0,%1" : "=r" (lz) : "r" (x)); + return 32 - lz; +} + +#include <asm-generic/bitops/builtin-__fls.h> + +/* + * 64-bit can do this using one cntlzd (count leading zeroes doubleword) + * instruction; for 32-bit we use the generic version, which does two + * 32-bit fls calls. + */ +#ifdef CONFIG_PPC64 +static inline int fls64(__u64 x) +{ + int lz; + + if (__builtin_constant_p(x)) + return x ? 64 - __builtin_clzll(x) : 0; + asm("cntlzd %0,%1" : "=r" (lz) : "r" (x)); + return 64 - lz; +} +#else +#include <asm-generic/bitops/fls64.h> +#endif + +#ifdef CONFIG_PPC64 +unsigned int __arch_hweight8(unsigned int w); +unsigned int __arch_hweight16(unsigned int w); +unsigned int __arch_hweight32(unsigned int w); +unsigned long __arch_hweight64(__u64 w); +#include <asm-generic/bitops/const_hweight.h> +#else +#include <asm-generic/bitops/hweight.h> +#endif + +#include <asm-generic/bitops/find.h> + +/* wrappers that deal with KASAN instrumentation */ +#include <asm-generic/bitops/instrumented-atomic.h> +#include <asm-generic/bitops/instrumented-lock.h> + +/* Little-endian versions */ +#include <asm-generic/bitops/le.h> + +/* Bitmap functions for the ext2 filesystem */ + +#include <asm-generic/bitops/ext2-atomic-setbit.h> + +#include <asm-generic/bitops/sched.h> + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_BITOPS_H */ diff --git a/arch/powerpc/include/asm/book3s/32/hash.h b/arch/powerpc/include/asm/book3s/32/hash.h new file mode 100644 index 000000000..2a0a467d2 --- /dev/null +++ b/arch/powerpc/include/asm/book3s/32/hash.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_32_HASH_H +#define _ASM_POWERPC_BOOK3S_32_HASH_H +#ifdef __KERNEL__ + +/* + * The "classic" 32-bit implementation of the PowerPC MMU uses a hash + * table containing PTEs, together with a set of 16 segment registers, + * to define the virtual to physical address mapping. + * + * We use the hash table as an extended TLB, i.e. a cache of currently + * active mappings. We maintain a two-level page table tree, much + * like that used by the i386, for the sake of the Linux memory + * management code. Low-level assembler code in hash_low_32.S + * (procedure hash_page) is responsible for extracting ptes from the + * tree and putting them into the hash table when necessary, and + * updating the accessed and modified bits in the page table tree. + */ + +#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */ +#define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */ +#define _PAGE_USER 0x004 /* usermode access allowed */ +#define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */ +#define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */ +#define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */ +#define _PAGE_WRITETHRU 0x040 /* W: cache write-through */ +#define _PAGE_DIRTY 0x080 /* C: page changed */ +#define _PAGE_ACCESSED 0x100 /* R: page referenced */ +#define _PAGE_EXEC 0x200 /* software: exec allowed */ +#define _PAGE_RW 0x400 /* software: user write access allowed */ +#define _PAGE_SPECIAL 0x800 /* software: Special page */ + +#ifdef CONFIG_PTE_64BIT +/* We never clear the high word of the pte */ +#define _PTE_NONE_MASK (0xffffffff00000000ULL | _PAGE_HASHPTE) +#else +#define _PTE_NONE_MASK _PAGE_HASHPTE +#endif + +#define _PMD_PRESENT 0 +#define _PMD_PRESENT_MASK (PAGE_MASK) +#define _PMD_BAD (~PAGE_MASK) + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_BOOK3S_32_HASH_H */ diff --git a/arch/powerpc/include/asm/book3s/32/kup.h b/arch/powerpc/include/asm/book3s/32/kup.h new file mode 100644 index 000000000..32fd4452e --- /dev/null +++ b/arch/powerpc/include/asm/book3s/32/kup.h @@ -0,0 +1,197 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_32_KUP_H +#define _ASM_POWERPC_BOOK3S_32_KUP_H + +#include <asm/bug.h> +#include <asm/book3s/32/mmu-hash.h> + +#ifdef __ASSEMBLY__ + +.macro kuep_update_sr gpr1, gpr2 /* NEVER use r0 as gpr2 due to addis */ +101: mtsrin \gpr1, \gpr2 + addi \gpr1, \gpr1, 0x111 /* next VSID */ + rlwinm \gpr1, \gpr1, 0, 0xf0ffffff /* clear VSID overflow */ + addis \gpr2, \gpr2, 0x1000 /* address of next segment */ + bdnz 101b + isync +.endm + +.macro kuep_lock gpr1, gpr2 +#ifdef CONFIG_PPC_KUEP + li \gpr1, NUM_USER_SEGMENTS + li \gpr2, 0 + mtctr \gpr1 + mfsrin \gpr1, \gpr2 + oris \gpr1, \gpr1, SR_NX@h /* set Nx */ + kuep_update_sr \gpr1, \gpr2 +#endif +.endm + +.macro kuep_unlock gpr1, gpr2 +#ifdef CONFIG_PPC_KUEP + li \gpr1, NUM_USER_SEGMENTS + li \gpr2, 0 + mtctr \gpr1 + mfsrin \gpr1, \gpr2 + rlwinm \gpr1, \gpr1, 0, ~SR_NX /* Clear Nx */ + kuep_update_sr \gpr1, \gpr2 +#endif +.endm + +#ifdef CONFIG_PPC_KUAP + +.macro kuap_update_sr gpr1, gpr2, gpr3 /* NEVER use r0 as gpr2 due to addis */ +101: mtsrin \gpr1, \gpr2 + addi \gpr1, \gpr1, 0x111 /* next VSID */ + rlwinm \gpr1, \gpr1, 0, 0xf0ffffff /* clear VSID overflow */ + addis \gpr2, \gpr2, 0x1000 /* address of next segment */ + cmplw \gpr2, \gpr3 + blt- 101b + isync +.endm + +.macro kuap_save_and_lock sp, thread, gpr1, gpr2, gpr3 + lwz \gpr2, KUAP(\thread) + rlwinm. \gpr3, \gpr2, 28, 0xf0000000 + stw \gpr2, STACK_REGS_KUAP(\sp) + beq+ 102f + li \gpr1, 0 + stw \gpr1, KUAP(\thread) + mfsrin \gpr1, \gpr2 + oris \gpr1, \gpr1, SR_KS@h /* set Ks */ + kuap_update_sr \gpr1, \gpr2, \gpr3 +102: +.endm + +.macro kuap_restore sp, current, gpr1, gpr2, gpr3 + lwz \gpr2, STACK_REGS_KUAP(\sp) + rlwinm. \gpr3, \gpr2, 28, 0xf0000000 + stw \gpr2, THREAD + KUAP(\current) + beq+ 102f + mfsrin \gpr1, \gpr2 + rlwinm \gpr1, \gpr1, 0, ~SR_KS /* Clear Ks */ + kuap_update_sr \gpr1, \gpr2, \gpr3 +102: +.endm + +.macro kuap_check current, gpr +#ifdef CONFIG_PPC_KUAP_DEBUG + lwz \gpr, THREAD + KUAP(\current) +999: twnei \gpr, 0 + EMIT_BUG_ENTRY 999b, __FILE__, __LINE__, (BUGFLAG_WARNING | BUGFLAG_ONCE) +#endif +.endm + +#endif /* CONFIG_PPC_KUAP */ + +#else /* !__ASSEMBLY__ */ + +#ifdef CONFIG_PPC_KUAP + +#include <linux/sched.h> + +static inline void kuap_update_sr(u32 sr, u32 addr, u32 end) +{ + addr &= 0xf0000000; /* align addr to start of segment */ + barrier(); /* make sure thread.kuap is updated before playing with SRs */ + while (addr < end) { + mtsrin(sr, addr); + sr += 0x111; /* next VSID */ + sr &= 0xf0ffffff; /* clear VSID overflow */ + addr += 0x10000000; /* address of next segment */ + } + isync(); /* Context sync required after mtsrin() */ +} + +static __always_inline void allow_user_access(void __user *to, const void __user *from, + u32 size, unsigned long dir) +{ + u32 addr, end; + + BUILD_BUG_ON(!__builtin_constant_p(dir)); + BUILD_BUG_ON(dir & ~KUAP_READ_WRITE); + + if (!(dir & KUAP_WRITE)) + return; + + addr = (__force u32)to; + + if (unlikely(addr >= TASK_SIZE || !size)) + return; + + end = min(addr + size, TASK_SIZE); + + current->thread.kuap = (addr & 0xf0000000) | ((((end - 1) >> 28) + 1) & 0xf); + kuap_update_sr(mfsrin(addr) & ~SR_KS, addr, end); /* Clear Ks */ +} + +static __always_inline void prevent_user_access(void __user *to, const void __user *from, + u32 size, unsigned long dir) +{ + u32 addr, end; + + BUILD_BUG_ON(!__builtin_constant_p(dir)); + + if (dir & KUAP_CURRENT_WRITE) { + u32 kuap = current->thread.kuap; + + if (unlikely(!kuap)) + return; + + addr = kuap & 0xf0000000; + end = kuap << 28; + } else if (dir & KUAP_WRITE) { + addr = (__force u32)to; + end = min(addr + size, TASK_SIZE); + + if (unlikely(addr >= TASK_SIZE || !size)) + return; + } else { + return; + } + + current->thread.kuap = 0; + kuap_update_sr(mfsrin(addr) | SR_KS, addr, end); /* set Ks */ +} + +static inline unsigned long prevent_user_access_return(void) +{ + unsigned long flags = current->thread.kuap; + unsigned long addr = flags & 0xf0000000; + unsigned long end = flags << 28; + void __user *to = (__force void __user *)addr; + + if (flags) + prevent_user_access(to, to, end - addr, KUAP_READ_WRITE); + + return flags; +} + +static inline void restore_user_access(unsigned long flags) +{ + unsigned long addr = flags & 0xf0000000; + unsigned long end = flags << 28; + void __user *to = (__force void __user *)addr; + + if (flags) + allow_user_access(to, to, end - addr, KUAP_READ_WRITE); +} + +static inline bool +bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write) +{ + unsigned long begin = regs->kuap & 0xf0000000; + unsigned long end = regs->kuap << 28; + + if (!is_write) + return false; + + return WARN(address < begin || address >= end, + "Bug: write fault blocked by segment registers !"); +} + +#endif /* CONFIG_PPC_KUAP */ + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_BOOK3S_32_KUP_H */ diff --git a/arch/powerpc/include/asm/book3s/32/mmu-hash.h b/arch/powerpc/include/asm/book3s/32/mmu-hash.h new file mode 100644 index 000000000..cbde06d0f --- /dev/null +++ b/arch/powerpc/include/asm/book3s/32/mmu-hash.h @@ -0,0 +1,115 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_32_MMU_HASH_H_ +#define _ASM_POWERPC_BOOK3S_32_MMU_HASH_H_ + +/* + * 32-bit hash table MMU support + */ + +/* + * BATs + */ + +/* Block size masks */ +#define BL_128K 0x000 +#define BL_256K 0x001 +#define BL_512K 0x003 +#define BL_1M 0x007 +#define BL_2M 0x00F +#define BL_4M 0x01F +#define BL_8M 0x03F +#define BL_16M 0x07F +#define BL_32M 0x0FF +#define BL_64M 0x1FF +#define BL_128M 0x3FF +#define BL_256M 0x7FF + +/* BAT Access Protection */ +#define BPP_XX 0x00 /* No access */ +#define BPP_RX 0x01 /* Read only */ +#define BPP_RW 0x02 /* Read/write */ + +#ifndef __ASSEMBLY__ +/* Contort a phys_addr_t into the right format/bits for a BAT */ +#ifdef CONFIG_PHYS_64BIT +#define BAT_PHYS_ADDR(x) ((u32)((x & 0x00000000fffe0000ULL) | \ + ((x & 0x0000000e00000000ULL) >> 24) | \ + ((x & 0x0000000100000000ULL) >> 30))) +#define PHYS_BAT_ADDR(x) (((u64)(x) & 0x00000000fffe0000ULL) | \ + (((u64)(x) << 24) & 0x0000000e00000000ULL) | \ + (((u64)(x) << 30) & 0x0000000100000000ULL)) +#else +#define BAT_PHYS_ADDR(x) (x) +#define PHYS_BAT_ADDR(x) ((x) & 0xfffe0000) +#endif + +struct ppc_bat { + u32 batu; + u32 batl; +}; +#endif /* !__ASSEMBLY__ */ + +/* + * Hash table + */ + +/* Values for PP (assumes Ks=0, Kp=1) */ +#define PP_RWXX 0 /* Supervisor read/write, User none */ +#define PP_RWRX 1 /* Supervisor read/write, User read */ +#define PP_RWRW 2 /* Supervisor read/write, User read/write */ +#define PP_RXRX 3 /* Supervisor read, User read */ + +/* Values for Segment Registers */ +#define SR_NX 0x10000000 /* No Execute */ +#define SR_KP 0x20000000 /* User key */ +#define SR_KS 0x40000000 /* Supervisor key */ + +#ifndef __ASSEMBLY__ + +/* + * Hardware Page Table Entry + * Note that the xpn and x bitfields are used only by processors that + * support extended addressing; otherwise, those bits are reserved. + */ +struct hash_pte { + unsigned long v:1; /* Entry is valid */ + unsigned long vsid:24; /* Virtual segment identifier */ + unsigned long h:1; /* Hash algorithm indicator */ + unsigned long api:6; /* Abbreviated page index */ + unsigned long rpn:20; /* Real (physical) page number */ + unsigned long xpn:3; /* Real page number bits 0-2, optional */ + unsigned long r:1; /* Referenced */ + unsigned long c:1; /* Changed */ + unsigned long w:1; /* Write-thru cache mode */ + unsigned long i:1; /* Cache inhibited */ + unsigned long m:1; /* Memory coherence */ + unsigned long g:1; /* Guarded */ + unsigned long x:1; /* Real page number bit 3, optional */ + unsigned long pp:2; /* Page protection */ +}; + +typedef struct { + unsigned long id; + unsigned long vdso_base; +} mm_context_t; + +void update_bats(void); +static inline void cleanup_cpu_mmu_context(void) { }; + +/* patch sites */ +extern s32 patch__hash_page_A0, patch__hash_page_A1, patch__hash_page_A2; +extern s32 patch__hash_page_B, patch__hash_page_C; +extern s32 patch__flush_hash_A0, patch__flush_hash_A1, patch__flush_hash_A2; +extern s32 patch__flush_hash_B; + +int __init find_free_bat(void); +unsigned int bat_block_size(unsigned long base, unsigned long top); +#endif /* !__ASSEMBLY__ */ + +/* We happily ignore the smaller BATs on 601, we don't actually use + * those definitions on hash32 at the moment anyway + */ +#define mmu_virtual_psize MMU_PAGE_4K +#define mmu_linear_psize MMU_PAGE_256M + +#endif /* _ASM_POWERPC_BOOK3S_32_MMU_HASH_H_ */ diff --git a/arch/powerpc/include/asm/book3s/32/pgalloc.h b/arch/powerpc/include/asm/book3s/32/pgalloc.h new file mode 100644 index 000000000..dc5c039eb --- /dev/null +++ b/arch/powerpc/include/asm/book3s/32/pgalloc.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_32_PGALLOC_H +#define _ASM_POWERPC_BOOK3S_32_PGALLOC_H + +#include <linux/threads.h> +#include <linux/slab.h> + +static inline pgd_t *pgd_alloc(struct mm_struct *mm) +{ + return kmem_cache_alloc(PGT_CACHE(PGD_INDEX_SIZE), + pgtable_gfp_flags(mm, GFP_KERNEL)); +} + +static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + kmem_cache_free(PGT_CACHE(PGD_INDEX_SIZE), pgd); +} + +/* + * We don't have any real pmd's, and this code never triggers because + * the pgd will always be present.. + */ +/* #define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); }) */ +#define pmd_free(mm, x) do { } while (0) +#define __pmd_free_tlb(tlb,x,a) do { } while (0) +/* #define pgd_populate(mm, pmd, pte) BUG() */ + +static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, + pte_t *pte) +{ + *pmdp = __pmd(__pa(pte) | _PMD_PRESENT); +} + +static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmdp, + pgtable_t pte_page) +{ + *pmdp = __pmd(__pa(pte_page) | _PMD_PRESENT); +} + +static inline void pgtable_free(void *table, unsigned index_size) +{ + if (!index_size) { + pte_fragment_free((unsigned long *)table, 0); + } else { + BUG_ON(index_size > MAX_PGTABLE_INDEX_SIZE); + kmem_cache_free(PGT_CACHE(index_size), table); + } +} + +#define get_hugepd_cache_index(x) (x) + +static inline void pgtable_free_tlb(struct mmu_gather *tlb, + void *table, int shift) +{ + unsigned long pgf = (unsigned long)table; + BUG_ON(shift > MAX_PGTABLE_INDEX_SIZE); + pgf |= shift; + tlb_remove_table(tlb, (void *)pgf); +} + +static inline void __tlb_remove_table(void *_table) +{ + void *table = (void *)((unsigned long)_table & ~MAX_PGTABLE_INDEX_SIZE); + unsigned shift = (unsigned long)_table & MAX_PGTABLE_INDEX_SIZE; + + pgtable_free(table, shift); +} + +static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table, + unsigned long address) +{ + pgtable_free_tlb(tlb, table, 0); +} +#endif /* _ASM_POWERPC_BOOK3S_32_PGALLOC_H */ diff --git a/arch/powerpc/include/asm/book3s/32/pgtable.h b/arch/powerpc/include/asm/book3s/32/pgtable.h new file mode 100644 index 000000000..94c5c6623 --- /dev/null +++ b/arch/powerpc/include/asm/book3s/32/pgtable.h @@ -0,0 +1,594 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_32_PGTABLE_H +#define _ASM_POWERPC_BOOK3S_32_PGTABLE_H + +#include <asm-generic/pgtable-nopmd.h> + +#include <asm/book3s/32/hash.h> + +/* And here we include common definitions */ + +#define _PAGE_KERNEL_RO 0 +#define _PAGE_KERNEL_ROX (_PAGE_EXEC) +#define _PAGE_KERNEL_RW (_PAGE_DIRTY | _PAGE_RW) +#define _PAGE_KERNEL_RWX (_PAGE_DIRTY | _PAGE_RW | _PAGE_EXEC) + +#define _PAGE_HPTEFLAGS _PAGE_HASHPTE + +#ifndef __ASSEMBLY__ + +static inline bool pte_user(pte_t pte) +{ + return pte_val(pte) & _PAGE_USER; +} +#endif /* __ASSEMBLY__ */ + +/* + * Location of the PFN in the PTE. Most 32-bit platforms use the same + * as _PAGE_SHIFT here (ie, naturally aligned). + * Platform who don't just pre-define the value so we don't override it here. + */ +#define PTE_RPN_SHIFT (PAGE_SHIFT) + +/* + * The mask covered by the RPN must be a ULL on 32-bit platforms with + * 64-bit PTEs. + */ +#ifdef CONFIG_PTE_64BIT +#define PTE_RPN_MASK (~((1ULL << PTE_RPN_SHIFT) - 1)) +#define MAX_POSSIBLE_PHYSMEM_BITS 36 +#else +#define PTE_RPN_MASK (~((1UL << PTE_RPN_SHIFT) - 1)) +#define MAX_POSSIBLE_PHYSMEM_BITS 32 +#endif + +/* + * _PAGE_CHG_MASK masks of bits that are to be preserved across + * pgprot changes. + */ +#define _PAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HASHPTE | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_SPECIAL) + +/* + * We define 2 sets of base prot bits, one for basic pages (ie, + * cacheable kernel and user pages) and one for non cacheable + * pages. We always set _PAGE_COHERENT when SMP is enabled or + * the processor might need it for DMA coherency. + */ +#define _PAGE_BASE_NC (_PAGE_PRESENT | _PAGE_ACCESSED) +#define _PAGE_BASE (_PAGE_BASE_NC | _PAGE_COHERENT) + +/* + * Permission masks used to generate the __P and __S table. + * + * Note:__pgprot is defined in arch/powerpc/include/asm/page.h + * + * Write permissions imply read permissions for now. + */ +#define PAGE_NONE __pgprot(_PAGE_BASE) +#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW) +#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC) +#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER) +#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) +#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER) +#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) + +/* Permission masks used for kernel mappings */ +#define PAGE_KERNEL __pgprot(_PAGE_BASE | _PAGE_KERNEL_RW) +#define PAGE_KERNEL_NC __pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | _PAGE_NO_CACHE) +#define PAGE_KERNEL_NCG __pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | \ + _PAGE_NO_CACHE | _PAGE_GUARDED) +#define PAGE_KERNEL_X __pgprot(_PAGE_BASE | _PAGE_KERNEL_RWX) +#define PAGE_KERNEL_RO __pgprot(_PAGE_BASE | _PAGE_KERNEL_RO) +#define PAGE_KERNEL_ROX __pgprot(_PAGE_BASE | _PAGE_KERNEL_ROX) + +/* + * Protection used for kernel text. We want the debuggers to be able to + * set breakpoints anywhere, so don't write protect the kernel text + * on platforms where such control is possible. + */ +#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\ + defined(CONFIG_KPROBES) || defined(CONFIG_DYNAMIC_FTRACE) +#define PAGE_KERNEL_TEXT PAGE_KERNEL_X +#else +#define PAGE_KERNEL_TEXT PAGE_KERNEL_ROX +#endif + +/* Make modules code happy. We don't set RO yet */ +#define PAGE_KERNEL_EXEC PAGE_KERNEL_X + +/* Advertise special mapping type for AGP */ +#define PAGE_AGP (PAGE_KERNEL_NC) +#define HAVE_PAGE_AGP + +#define PTE_INDEX_SIZE PTE_SHIFT +#define PMD_INDEX_SIZE 0 +#define PUD_INDEX_SIZE 0 +#define PGD_INDEX_SIZE (32 - PGDIR_SHIFT) + +#define PMD_CACHE_INDEX PMD_INDEX_SIZE +#define PUD_CACHE_INDEX PUD_INDEX_SIZE + +#ifndef __ASSEMBLY__ +#define PTE_TABLE_SIZE (sizeof(pte_t) << PTE_INDEX_SIZE) +#define PMD_TABLE_SIZE 0 +#define PUD_TABLE_SIZE 0 +#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE) + +/* Bits to mask out from a PMD to get to the PTE page */ +#define PMD_MASKED_BITS (PTE_TABLE_SIZE - 1) +#endif /* __ASSEMBLY__ */ + +#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE) +#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE) + +/* + * The normal case is that PTEs are 32-bits and we have a 1-page + * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus + * + * For any >32-bit physical address platform, we can use the following + * two level page table layout where the pgdir is 8KB and the MS 13 bits + * are an index to the second level table. The combined pgdir/pmd first + * level has 2048 entries and the second level has 512 64-bit PTE entries. + * -Matt + */ +/* PGDIR_SHIFT determines what a top-level page table entry can map */ +#define PGDIR_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) + +#ifndef __ASSEMBLY__ + +int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot); +void unmap_kernel_page(unsigned long va); + +#endif /* !__ASSEMBLY__ */ + +/* + * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary + * value (for now) on others, from where we can start layout kernel + * virtual space that goes below PKMAP and FIXMAP + */ +#include <asm/fixmap.h> + +/* + * ioremap_bot starts at that address. Early ioremaps move down from there, + * until mem_init() at which point this becomes the top of the vmalloc + * and ioremap space + */ +#ifdef CONFIG_HIGHMEM +#define IOREMAP_TOP PKMAP_BASE +#else +#define IOREMAP_TOP FIXADDR_START +#endif + +/* PPC32 shares vmalloc area with ioremap */ +#define IOREMAP_START VMALLOC_START +#define IOREMAP_END VMALLOC_END + +/* + * Just any arbitrary offset to the start of the vmalloc VM area: the + * current 16MB value just means that there will be a 64MB "hole" after the + * physical memory until the kernel virtual memory starts. That means that + * any out-of-bounds memory accesses will hopefully be caught. + * The vmalloc() routines leaves a hole of 4kB between each vmalloced + * area for the same reason. ;) + * + * We no longer map larger than phys RAM with the BATs so we don't have + * to worry about the VMALLOC_OFFSET causing problems. We do have to worry + * about clashes between our early calls to ioremap() that start growing down + * from ioremap_base being run into the VM area allocations (growing upwards + * from VMALLOC_START). For this reason we have ioremap_bot to check when + * we actually run into our mappings setup in the early boot with the VM + * system. This really does become a problem for machines with good amounts + * of RAM. -- Cort + */ +#define VMALLOC_OFFSET (0x1000000) /* 16M */ + +#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))) + +#ifdef CONFIG_KASAN_VMALLOC +#define VMALLOC_END ALIGN_DOWN(ioremap_bot, PAGE_SIZE << KASAN_SHADOW_SCALE_SHIFT) +#else +#define VMALLOC_END ioremap_bot +#endif + +#ifdef CONFIG_STRICT_KERNEL_RWX +#define MODULES_END ALIGN_DOWN(PAGE_OFFSET, SZ_256M) +#define MODULES_VADDR (MODULES_END - SZ_256M) +#endif + +#ifndef __ASSEMBLY__ +#include <linux/sched.h> +#include <linux/threads.h> + +/* Bits to mask out from a PGD to get to the PUD page */ +#define PGD_MASKED_BITS 0 + +#define pte_ERROR(e) \ + pr_err("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \ + (unsigned long long)pte_val(e)) +#define pgd_ERROR(e) \ + pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) +/* + * Bits in a linux-style PTE. These match the bits in the + * (hardware-defined) PowerPC PTE as closely as possible. + */ + +#define pte_clear(mm, addr, ptep) \ + do { pte_update(mm, addr, ptep, ~_PAGE_HASHPTE, 0, 0); } while (0) + +#define pmd_none(pmd) (!pmd_val(pmd)) +#define pmd_bad(pmd) (pmd_val(pmd) & _PMD_BAD) +#define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT_MASK) +static inline void pmd_clear(pmd_t *pmdp) +{ + *pmdp = __pmd(0); +} + + +/* + * When flushing the tlb entry for a page, we also need to flush the hash + * table entry. flush_hash_pages is assembler (for speed) in hashtable.S. + */ +extern int flush_hash_pages(unsigned context, unsigned long va, + unsigned long pmdval, int count); + +/* Add an HPTE to the hash table */ +extern void add_hash_page(unsigned context, unsigned long va, + unsigned long pmdval); + +/* Flush an entry from the TLB/hash table */ +extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, + unsigned long address); + +/* + * PTE updates. This function is called whenever an existing + * valid PTE is updated. This does -not- include set_pte_at() + * which nowadays only sets a new PTE. + * + * Depending on the type of MMU, we may need to use atomic updates + * and the PTE may be either 32 or 64 bit wide. In the later case, + * when using atomic updates, only the low part of the PTE is + * accessed atomically. + */ +static inline pte_basic_t pte_update(struct mm_struct *mm, unsigned long addr, pte_t *p, + unsigned long clr, unsigned long set, int huge) +{ + pte_basic_t old; + unsigned long tmp; + + __asm__ __volatile__( +#ifndef CONFIG_PTE_64BIT +"1: lwarx %0, 0, %3\n" +" andc %1, %0, %4\n" +#else +"1: lwarx %L0, 0, %3\n" +" lwz %0, -4(%3)\n" +" andc %1, %L0, %4\n" +#endif +" or %1, %1, %5\n" +" stwcx. %1, 0, %3\n" +" bne- 1b" + : "=&r" (old), "=&r" (tmp), "=m" (*p) +#ifndef CONFIG_PTE_64BIT + : "r" (p), +#else + : "b" ((unsigned long)(p) + 4), +#endif + "r" (clr), "r" (set), "m" (*p) + : "cc" ); + + return old; +} + +/* + * 2.6 calls this without flushing the TLB entry; this is wrong + * for our hash-based implementation, we fix that up here. + */ +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG +static inline int __ptep_test_and_clear_young(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + unsigned long old; + old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0, 0); + if (old & _PAGE_HASHPTE) { + unsigned long ptephys = __pa(ptep) & PAGE_MASK; + flush_hash_pages(mm->context.id, addr, ptephys, 1); + } + return (old & _PAGE_ACCESSED) != 0; +} +#define ptep_test_and_clear_young(__vma, __addr, __ptep) \ + __ptep_test_and_clear_young((__vma)->vm_mm, __addr, __ptep) + +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) +{ + return __pte(pte_update(mm, addr, ptep, ~_PAGE_HASHPTE, 0, 0)); +} + +#define __HAVE_ARCH_PTEP_SET_WRPROTECT +static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) +{ + pte_update(mm, addr, ptep, _PAGE_RW, 0, 0); +} + +static inline void __ptep_set_access_flags(struct vm_area_struct *vma, + pte_t *ptep, pte_t entry, + unsigned long address, + int psize) +{ + unsigned long set = pte_val(entry) & + (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC); + + pte_update(vma->vm_mm, address, ptep, 0, set, 0); + + flush_tlb_page(vma, address); +} + +#define __HAVE_ARCH_PTE_SAME +#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0) + +#define pmd_page(pmd) \ + pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT) + +/* + * Encode and decode a swap entry. + * Note that the bits we use in a PTE for representing a swap entry + * must not include the _PAGE_PRESENT bit or the _PAGE_HASHPTE bit (if used). + * -- paulus + */ +#define __swp_type(entry) ((entry).val & 0x1f) +#define __swp_offset(entry) ((entry).val >> 5) +#define __swp_entry(type, offset) ((swp_entry_t) { (type) | ((offset) << 5) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 3 }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 3 }) + +/* Generic accessors to PTE bits */ +static inline int pte_write(pte_t pte) { return !!(pte_val(pte) & _PAGE_RW);} +static inline int pte_read(pte_t pte) { return 1; } +static inline int pte_dirty(pte_t pte) { return !!(pte_val(pte) & _PAGE_DIRTY); } +static inline int pte_young(pte_t pte) { return !!(pte_val(pte) & _PAGE_ACCESSED); } +static inline int pte_special(pte_t pte) { return !!(pte_val(pte) & _PAGE_SPECIAL); } +static inline int pte_none(pte_t pte) { return (pte_val(pte) & ~_PTE_NONE_MASK) == 0; } +static inline bool pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_EXEC; } + +static inline int pte_present(pte_t pte) +{ + return pte_val(pte) & _PAGE_PRESENT; +} + +static inline bool pte_hw_valid(pte_t pte) +{ + return pte_val(pte) & _PAGE_PRESENT; +} + +static inline bool pte_hashpte(pte_t pte) +{ + return !!(pte_val(pte) & _PAGE_HASHPTE); +} + +static inline bool pte_ci(pte_t pte) +{ + return !!(pte_val(pte) & _PAGE_NO_CACHE); +} + +/* + * We only find page table entry in the last level + * Hence no need for other accessors + */ +#define pte_access_permitted pte_access_permitted +static inline bool pte_access_permitted(pte_t pte, bool write) +{ + /* + * A read-only access is controlled by _PAGE_USER bit. + * We have _PAGE_READ set for WRITE and EXECUTE + */ + if (!pte_present(pte) || !pte_user(pte) || !pte_read(pte)) + return false; + + if (write && !pte_write(pte)) + return false; + + return true; +} + +/* Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + * + * Even if PTEs can be unsigned long long, a PFN is always an unsigned + * long for now. + */ +static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot) +{ + return __pte(((pte_basic_t)(pfn) << PTE_RPN_SHIFT) | + pgprot_val(pgprot)); +} + +static inline unsigned long pte_pfn(pte_t pte) +{ + return pte_val(pte) >> PTE_RPN_SHIFT; +} + +/* Generic modifiers for PTE bits */ +static inline pte_t pte_wrprotect(pte_t pte) +{ + return __pte(pte_val(pte) & ~_PAGE_RW); +} + +static inline pte_t pte_exprotect(pte_t pte) +{ + return __pte(pte_val(pte) & ~_PAGE_EXEC); +} + +static inline pte_t pte_mkclean(pte_t pte) +{ + return __pte(pte_val(pte) & ~_PAGE_DIRTY); +} + +static inline pte_t pte_mkold(pte_t pte) +{ + return __pte(pte_val(pte) & ~_PAGE_ACCESSED); +} + +static inline pte_t pte_mkexec(pte_t pte) +{ + return __pte(pte_val(pte) | _PAGE_EXEC); +} + +static inline pte_t pte_mkpte(pte_t pte) +{ + return pte; +} + +static inline pte_t pte_mkwrite(pte_t pte) +{ + return __pte(pte_val(pte) | _PAGE_RW); +} + +static inline pte_t pte_mkdirty(pte_t pte) +{ + return __pte(pte_val(pte) | _PAGE_DIRTY); +} + +static inline pte_t pte_mkyoung(pte_t pte) +{ + return __pte(pte_val(pte) | _PAGE_ACCESSED); +} + +static inline pte_t pte_mkspecial(pte_t pte) +{ + return __pte(pte_val(pte) | _PAGE_SPECIAL); +} + +static inline pte_t pte_mkhuge(pte_t pte) +{ + return pte; +} + +static inline pte_t pte_mkprivileged(pte_t pte) +{ + return __pte(pte_val(pte) & ~_PAGE_USER); +} + +static inline pte_t pte_mkuser(pte_t pte) +{ + return __pte(pte_val(pte) | _PAGE_USER); +} + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot)); +} + + + +/* This low level function performs the actual PTE insertion + * Setting the PTE depends on the MMU type and other factors. It's + * an horrible mess that I'm not going to try to clean up now but + * I'm keeping it in one place rather than spread around + */ +static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte, int percpu) +{ +#if defined(CONFIG_SMP) && !defined(CONFIG_PTE_64BIT) + /* First case is 32-bit Hash MMU in SMP mode with 32-bit PTEs. We use the + * helper pte_update() which does an atomic update. We need to do that + * because a concurrent invalidation can clear _PAGE_HASHPTE. If it's a + * per-CPU PTE such as a kmap_atomic, we do a simple update preserving + * the hash bits instead (ie, same as the non-SMP case) + */ + if (percpu) + *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE) + | (pte_val(pte) & ~_PAGE_HASHPTE)); + else + pte_update(mm, addr, ptep, ~_PAGE_HASHPTE, pte_val(pte), 0); + +#elif defined(CONFIG_PTE_64BIT) + /* Second case is 32-bit with 64-bit PTE. In this case, we + * can just store as long as we do the two halves in the right order + * with a barrier in between. This is possible because we take care, + * in the hash code, to pre-invalidate if the PTE was already hashed, + * which synchronizes us with any concurrent invalidation. + * In the percpu case, we also fallback to the simple update preserving + * the hash bits + */ + if (percpu) { + *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE) + | (pte_val(pte) & ~_PAGE_HASHPTE)); + return; + } + if (pte_val(*ptep) & _PAGE_HASHPTE) + flush_hash_entry(mm, ptep, addr); + __asm__ __volatile__("\ + stw%X0 %2,%0\n\ + eieio\n\ + stw%X1 %L2,%1" + : "=m" (*ptep), "=m" (*((unsigned char *)ptep+4)) + : "r" (pte) : "memory"); + +#else + /* Third case is 32-bit hash table in UP mode, we need to preserve + * the _PAGE_HASHPTE bit since we may not have invalidated the previous + * translation in the hash yet (done in a subsequent flush_tlb_xxx()) + * and see we need to keep track that this PTE needs invalidating + */ + *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE) + | (pte_val(pte) & ~_PAGE_HASHPTE)); +#endif +} + +/* + * Macro to mark a page protection value as "uncacheable". + */ + +#define _PAGE_CACHE_CTL (_PAGE_COHERENT | _PAGE_GUARDED | _PAGE_NO_CACHE | \ + _PAGE_WRITETHRU) + +#define pgprot_noncached pgprot_noncached +static inline pgprot_t pgprot_noncached(pgprot_t prot) +{ + return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | + _PAGE_NO_CACHE | _PAGE_GUARDED); +} + +#define pgprot_noncached_wc pgprot_noncached_wc +static inline pgprot_t pgprot_noncached_wc(pgprot_t prot) +{ + return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | + _PAGE_NO_CACHE); +} + +#define pgprot_cached pgprot_cached +static inline pgprot_t pgprot_cached(pgprot_t prot) +{ + return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | + _PAGE_COHERENT); +} + +#define pgprot_cached_wthru pgprot_cached_wthru +static inline pgprot_t pgprot_cached_wthru(pgprot_t prot) +{ + return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | + _PAGE_COHERENT | _PAGE_WRITETHRU); +} + +#define pgprot_cached_noncoherent pgprot_cached_noncoherent +static inline pgprot_t pgprot_cached_noncoherent(pgprot_t prot) +{ + return __pgprot(pgprot_val(prot) & ~_PAGE_CACHE_CTL); +} + +#define pgprot_writecombine pgprot_writecombine +static inline pgprot_t pgprot_writecombine(pgprot_t prot) +{ + return pgprot_noncached_wc(prot); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_BOOK3S_32_PGTABLE_H */ diff --git a/arch/powerpc/include/asm/book3s/32/tlbflush.h b/arch/powerpc/include/asm/book3s/32/tlbflush.h new file mode 100644 index 000000000..068085b70 --- /dev/null +++ b/arch/powerpc/include/asm/book3s/32/tlbflush.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_32_TLBFLUSH_H +#define _ASM_POWERPC_BOOK3S_32_TLBFLUSH_H + +#define MMU_NO_CONTEXT (0) +/* + * TLB flushing for "classic" hash-MMU 32-bit CPUs, 6xx, 7xx, 7xxx + */ +extern void flush_tlb_mm(struct mm_struct *mm); +extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); +extern void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr); +extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); +static inline void local_flush_tlb_page(struct vm_area_struct *vma, + unsigned long vmaddr) +{ + flush_tlb_page(vma, vmaddr); +} +static inline void local_flush_tlb_mm(struct mm_struct *mm) +{ + flush_tlb_mm(mm); +} + +#endif /* _ASM_POWERPC_TLBFLUSH_H */ diff --git a/arch/powerpc/include/asm/book3s/64/hash-4k.h b/arch/powerpc/include/asm/book3s/64/hash-4k.h new file mode 100644 index 000000000..b6ac4f86c --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/hash-4k.h @@ -0,0 +1,172 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_64_HASH_4K_H +#define _ASM_POWERPC_BOOK3S_64_HASH_4K_H + +#define H_PTE_INDEX_SIZE 9 // size: 8B << 9 = 4KB, maps: 2^9 x 4KB = 2MB +#define H_PMD_INDEX_SIZE 7 // size: 8B << 7 = 1KB, maps: 2^7 x 2MB = 256MB +#define H_PUD_INDEX_SIZE 9 // size: 8B << 9 = 4KB, maps: 2^9 x 256MB = 128GB +#define H_PGD_INDEX_SIZE 9 // size: 8B << 9 = 4KB, maps: 2^9 x 128GB = 64TB + +/* + * Each context is 512TB. But on 4k we restrict our max TASK size to 64TB + * Hence also limit max EA bits to 64TB. + */ +#define MAX_EA_BITS_PER_CONTEXT 46 + + +/* + * Our page table limit us to 64TB. For 64TB physical memory, we only need 64GB + * of vmemmap space. To better support sparse memory layout, we use 61TB + * linear map range, 1TB of vmalloc, 1TB of I/O and 1TB of vmememmap. + */ +#define REGION_SHIFT (40) +#define H_KERN_MAP_SIZE (ASM_CONST(1) << REGION_SHIFT) + +/* + * Limits the linear mapping range + */ +#define H_MAX_PHYSMEM_BITS 46 + +/* + * Define the address range of the kernel non-linear virtual area (61TB) + */ +#define H_KERN_VIRT_START ASM_CONST(0xc0003d0000000000) + +#ifndef __ASSEMBLY__ +#define H_PTE_TABLE_SIZE (sizeof(pte_t) << H_PTE_INDEX_SIZE) +#define H_PMD_TABLE_SIZE (sizeof(pmd_t) << H_PMD_INDEX_SIZE) +#define H_PUD_TABLE_SIZE (sizeof(pud_t) << H_PUD_INDEX_SIZE) +#define H_PGD_TABLE_SIZE (sizeof(pgd_t) << H_PGD_INDEX_SIZE) + +#define H_PAGE_F_GIX_SHIFT _PAGE_PA_MAX +#define H_PAGE_F_SECOND _RPAGE_PKEY_BIT0 /* HPTE is in 2ndary HPTEG */ +#define H_PAGE_F_GIX (_RPAGE_RPN43 | _RPAGE_RPN42 | _RPAGE_RPN41) +#define H_PAGE_BUSY _RPAGE_RSV1 +#define H_PAGE_HASHPTE _RPAGE_PKEY_BIT4 + +/* PTE flags to conserve for HPTE identification */ +#define _PAGE_HPTEFLAGS (H_PAGE_BUSY | H_PAGE_HASHPTE | \ + H_PAGE_F_SECOND | H_PAGE_F_GIX) +/* + * Not supported by 4k linux page size + */ +#define H_PAGE_4K_PFN 0x0 +#define H_PAGE_THP_HUGE 0x0 +#define H_PAGE_COMBO 0x0 + +/* 8 bytes per each pte entry */ +#define H_PTE_FRAG_SIZE_SHIFT (H_PTE_INDEX_SIZE + 3) +#define H_PTE_FRAG_NR (PAGE_SIZE >> H_PTE_FRAG_SIZE_SHIFT) +#define H_PMD_FRAG_SIZE_SHIFT (H_PMD_INDEX_SIZE + 3) +#define H_PMD_FRAG_NR (PAGE_SIZE >> H_PMD_FRAG_SIZE_SHIFT) + +/* memory key bits, only 8 keys supported */ +#define H_PTE_PKEY_BIT4 0 +#define H_PTE_PKEY_BIT3 0 +#define H_PTE_PKEY_BIT2 _RPAGE_PKEY_BIT3 +#define H_PTE_PKEY_BIT1 _RPAGE_PKEY_BIT2 +#define H_PTE_PKEY_BIT0 _RPAGE_PKEY_BIT1 + + +/* + * On all 4K setups, remap_4k_pfn() equates to remap_pfn_range() + */ +#define remap_4k_pfn(vma, addr, pfn, prot) \ + remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot)) + +#ifdef CONFIG_HUGETLB_PAGE +static inline int hash__hugepd_ok(hugepd_t hpd) +{ + unsigned long hpdval = hpd_val(hpd); + /* + * if it is not a pte and have hugepd shift mask + * set, then it is a hugepd directory pointer + */ + if (!(hpdval & _PAGE_PTE) && (hpdval & _PAGE_PRESENT) && + ((hpdval & HUGEPD_SHIFT_MASK) != 0)) + return true; + return false; +} +#endif + +/* + * 4K PTE format is different from 64K PTE format. Saving the hash_slot is just + * a matter of returning the PTE bits that need to be modified. On 64K PTE, + * things are a little more involved and hence needs many more parameters to + * accomplish the same. However we want to abstract this out from the caller by + * keeping the prototype consistent across the two formats. + */ +static inline unsigned long pte_set_hidx(pte_t *ptep, real_pte_t rpte, + unsigned int subpg_index, unsigned long hidx, + int offset) +{ + return (hidx << H_PAGE_F_GIX_SHIFT) & + (H_PAGE_F_SECOND | H_PAGE_F_GIX); +} + +#ifdef CONFIG_TRANSPARENT_HUGEPAGE + +static inline char *get_hpte_slot_array(pmd_t *pmdp) +{ + BUG(); + return NULL; +} + +static inline unsigned int hpte_valid(unsigned char *hpte_slot_array, int index) +{ + BUG(); + return 0; +} + +static inline unsigned int hpte_hash_index(unsigned char *hpte_slot_array, + int index) +{ + BUG(); + return 0; +} + +static inline void mark_hpte_slot_valid(unsigned char *hpte_slot_array, + unsigned int index, unsigned int hidx) +{ + BUG(); +} + +static inline int hash__pmd_trans_huge(pmd_t pmd) +{ + return 0; +} + +static inline int hash__pmd_same(pmd_t pmd_a, pmd_t pmd_b) +{ + BUG(); + return 0; +} + +static inline pmd_t hash__pmd_mkhuge(pmd_t pmd) +{ + BUG(); + return pmd; +} + +extern unsigned long hash__pmd_hugepage_update(struct mm_struct *mm, + unsigned long addr, pmd_t *pmdp, + unsigned long clr, unsigned long set); +extern pmd_t hash__pmdp_collapse_flush(struct vm_area_struct *vma, + unsigned long address, pmd_t *pmdp); +extern void hash__pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp, + pgtable_t pgtable); +extern pgtable_t hash__pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp); +extern pmd_t hash__pmdp_huge_get_and_clear(struct mm_struct *mm, + unsigned long addr, pmd_t *pmdp); +extern int hash__has_transparent_hugepage(void); +#endif + +static inline pmd_t hash__pmd_mkdevmap(pmd_t pmd) +{ + BUG(); + return pmd; +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_BOOK3S_64_HASH_4K_H */ diff --git a/arch/powerpc/include/asm/book3s/64/hash-64k.h b/arch/powerpc/include/asm/book3s/64/hash-64k.h new file mode 100644 index 000000000..338e62fbe --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/hash-64k.h @@ -0,0 +1,296 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_64_HASH_64K_H +#define _ASM_POWERPC_BOOK3S_64_HASH_64K_H + +#define H_PTE_INDEX_SIZE 8 // size: 8B << 8 = 2KB, maps 2^8 x 64KB = 16MB +#define H_PMD_INDEX_SIZE 10 // size: 8B << 10 = 8KB, maps 2^10 x 16MB = 16GB +#define H_PUD_INDEX_SIZE 10 // size: 8B << 10 = 8KB, maps 2^10 x 16GB = 16TB +#define H_PGD_INDEX_SIZE 8 // size: 8B << 8 = 2KB, maps 2^8 x 16TB = 4PB + +/* + * If we store section details in page->flags we can't increase the MAX_PHYSMEM_BITS + * if we increase SECTIONS_WIDTH we will not store node details in page->flags and + * page_to_nid does a page->section->node lookup + * Hence only increase for VMEMMAP. Further depending on SPARSEMEM_EXTREME reduce + * memory requirements with large number of sections. + * 51 bits is the max physical real address on POWER9 + */ +#if defined(CONFIG_SPARSEMEM_VMEMMAP) && defined(CONFIG_SPARSEMEM_EXTREME) +#define H_MAX_PHYSMEM_BITS 51 +#else +#define H_MAX_PHYSMEM_BITS 46 +#endif + +/* + * Each context is 512TB size. SLB miss for first context/default context + * is handled in the hotpath. + */ +#define MAX_EA_BITS_PER_CONTEXT 49 +#define REGION_SHIFT MAX_EA_BITS_PER_CONTEXT + +/* + * We use one context for each MAP area. + */ +#define H_KERN_MAP_SIZE (1UL << MAX_EA_BITS_PER_CONTEXT) + +/* + * Define the address range of the kernel non-linear virtual area + * 2PB + */ +#define H_KERN_VIRT_START ASM_CONST(0xc008000000000000) + +/* + * 64k aligned address free up few of the lower bits of RPN for us + * We steal that here. For more deatils look at pte_pfn/pfn_pte() + */ +#define H_PAGE_COMBO _RPAGE_RPN0 /* this is a combo 4k page */ +#define H_PAGE_4K_PFN _RPAGE_RPN1 /* PFN is for a single 4k page */ +#define H_PAGE_BUSY _RPAGE_RSV1 /* software: PTE & hash are busy */ +#define H_PAGE_HASHPTE _RPAGE_RPN43 /* PTE has associated HPTE */ + +/* memory key bits. */ +#define H_PTE_PKEY_BIT4 _RPAGE_PKEY_BIT4 +#define H_PTE_PKEY_BIT3 _RPAGE_PKEY_BIT3 +#define H_PTE_PKEY_BIT2 _RPAGE_PKEY_BIT2 +#define H_PTE_PKEY_BIT1 _RPAGE_PKEY_BIT1 +#define H_PTE_PKEY_BIT0 _RPAGE_PKEY_BIT0 + +/* + * We need to differentiate between explicit huge page and THP huge + * page, since THP huge page also need to track real subpage details + */ +#define H_PAGE_THP_HUGE H_PAGE_4K_PFN + +/* PTE flags to conserve for HPTE identification */ +#define _PAGE_HPTEFLAGS (H_PAGE_BUSY | H_PAGE_HASHPTE | H_PAGE_COMBO) +/* + * We use a 2K PTE page fragment and another 2K for storing + * real_pte_t hash index + * 8 bytes per each pte entry and another 8 bytes for storing + * slot details. + */ +#define H_PTE_FRAG_SIZE_SHIFT (H_PTE_INDEX_SIZE + 3 + 1) +#define H_PTE_FRAG_NR (PAGE_SIZE >> H_PTE_FRAG_SIZE_SHIFT) + +#if defined(CONFIG_TRANSPARENT_HUGEPAGE) || defined(CONFIG_HUGETLB_PAGE) +#define H_PMD_FRAG_SIZE_SHIFT (H_PMD_INDEX_SIZE + 3 + 1) +#else +#define H_PMD_FRAG_SIZE_SHIFT (H_PMD_INDEX_SIZE + 3) +#endif +#define H_PMD_FRAG_NR (PAGE_SIZE >> H_PMD_FRAG_SIZE_SHIFT) + +#ifndef __ASSEMBLY__ +#include <asm/errno.h> + +/* + * With 64K pages on hash table, we have a special PTE format that + * uses a second "half" of the page table to encode sub-page information + * in order to deal with 64K made of 4K HW pages. Thus we override the + * generic accessors and iterators here + */ +#define __real_pte __real_pte +static inline real_pte_t __real_pte(pte_t pte, pte_t *ptep, int offset) +{ + real_pte_t rpte; + unsigned long *hidxp; + + rpte.pte = pte; + + /* + * Ensure that we do not read the hidx before we read the PTE. Because + * the writer side is expected to finish writing the hidx first followed + * by the PTE, by using smp_wmb(). pte_set_hash_slot() ensures that. + */ + smp_rmb(); + + hidxp = (unsigned long *)(ptep + offset); + rpte.hidx = *hidxp; + return rpte; +} + +/* + * shift the hidx representation by one-modulo-0xf; i.e hidx 0 is respresented + * as 1, 1 as 2,... , and 0xf as 0. This convention lets us represent a + * invalid hidx 0xf with a 0x0 bit value. PTEs are anyway zero'd when + * allocated. We dont have to zero them gain; thus save on the initialization. + */ +#define HIDX_UNSHIFT_BY_ONE(x) ((x + 0xfUL) & 0xfUL) /* shift backward by one */ +#define HIDX_SHIFT_BY_ONE(x) ((x + 0x1UL) & 0xfUL) /* shift forward by one */ +#define HIDX_BITS(x, index) (x << (index << 2)) +#define BITS_TO_HIDX(x, index) ((x >> (index << 2)) & 0xfUL) +#define INVALID_RPTE_HIDX 0x0UL + +static inline unsigned long __rpte_to_hidx(real_pte_t rpte, unsigned long index) +{ + return HIDX_UNSHIFT_BY_ONE(BITS_TO_HIDX(rpte.hidx, index)); +} + +/* + * Commit the hidx and return PTE bits that needs to be modified. The caller is + * expected to modify the PTE bits accordingly and commit the PTE to memory. + */ +static inline unsigned long pte_set_hidx(pte_t *ptep, real_pte_t rpte, + unsigned int subpg_index, + unsigned long hidx, int offset) +{ + unsigned long *hidxp = (unsigned long *)(ptep + offset); + + rpte.hidx &= ~HIDX_BITS(0xfUL, subpg_index); + *hidxp = rpte.hidx | HIDX_BITS(HIDX_SHIFT_BY_ONE(hidx), subpg_index); + + /* + * Anyone reading PTE must ensure hidx bits are read after reading the + * PTE by using the read-side barrier smp_rmb(). __real_pte() can be + * used for that. + */ + smp_wmb(); + + /* No PTE bits to be modified, return 0x0UL */ + return 0x0UL; +} + +#define __rpte_to_pte(r) ((r).pte) +extern bool __rpte_sub_valid(real_pte_t rpte, unsigned long index); +/* + * Trick: we set __end to va + 64k, which happens works for + * a 16M page as well as we want only one iteration + */ +#define pte_iterate_hashed_subpages(rpte, psize, vpn, index, shift) \ + do { \ + unsigned long __end = vpn + (1UL << (PAGE_SHIFT - VPN_SHIFT)); \ + unsigned __split = (psize == MMU_PAGE_4K || \ + psize == MMU_PAGE_64K_AP); \ + shift = mmu_psize_defs[psize].shift; \ + for (index = 0; vpn < __end; index++, \ + vpn += (1L << (shift - VPN_SHIFT))) { \ + if (!__split || __rpte_sub_valid(rpte, index)) + +#define pte_iterate_hashed_end() } } while(0) + +#define pte_pagesize_index(mm, addr, pte) \ + (((pte) & H_PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K) + +extern int remap_pfn_range(struct vm_area_struct *, unsigned long addr, + unsigned long pfn, unsigned long size, pgprot_t); +static inline int hash__remap_4k_pfn(struct vm_area_struct *vma, unsigned long addr, + unsigned long pfn, pgprot_t prot) +{ + if (pfn > (PTE_RPN_MASK >> PAGE_SHIFT)) { + WARN(1, "remap_4k_pfn called with wrong pfn value\n"); + return -EINVAL; + } + return remap_pfn_range(vma, addr, pfn, PAGE_SIZE, + __pgprot(pgprot_val(prot) | H_PAGE_4K_PFN)); +} + +#define H_PTE_TABLE_SIZE PTE_FRAG_SIZE +#if defined(CONFIG_TRANSPARENT_HUGEPAGE) || defined (CONFIG_HUGETLB_PAGE) +#define H_PMD_TABLE_SIZE ((sizeof(pmd_t) << PMD_INDEX_SIZE) + \ + (sizeof(unsigned long) << PMD_INDEX_SIZE)) +#else +#define H_PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE) +#endif +#ifdef CONFIG_HUGETLB_PAGE +#define H_PUD_TABLE_SIZE ((sizeof(pud_t) << PUD_INDEX_SIZE) + \ + (sizeof(unsigned long) << PUD_INDEX_SIZE)) +#else +#define H_PUD_TABLE_SIZE (sizeof(pud_t) << PUD_INDEX_SIZE) +#endif +#define H_PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE) + +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +static inline char *get_hpte_slot_array(pmd_t *pmdp) +{ + /* + * The hpte hindex is stored in the pgtable whose address is in the + * second half of the PMD + * + * Order this load with the test for pmd_trans_huge in the caller + */ + smp_rmb(); + return *(char **)(pmdp + PTRS_PER_PMD); + + +} +/* + * The linux hugepage PMD now include the pmd entries followed by the address + * to the stashed pgtable_t. The stashed pgtable_t contains the hpte bits. + * [ 000 | 1 bit secondary | 3 bit hidx | 1 bit valid]. We use one byte per + * each HPTE entry. With 16MB hugepage and 64K HPTE we need 256 entries and + * with 4K HPTE we need 4096 entries. Both will fit in a 4K pgtable_t. + * + * The top three bits are intentionally left as zero. This memory location + * are also used as normal page PTE pointers. So if we have any pointers + * left around while we collapse a hugepage, we need to make sure + * _PAGE_PRESENT bit of that is zero when we look at them + */ +static inline unsigned int hpte_valid(unsigned char *hpte_slot_array, int index) +{ + return hpte_slot_array[index] & 0x1; +} + +static inline unsigned int hpte_hash_index(unsigned char *hpte_slot_array, + int index) +{ + return hpte_slot_array[index] >> 1; +} + +static inline void mark_hpte_slot_valid(unsigned char *hpte_slot_array, + unsigned int index, unsigned int hidx) +{ + hpte_slot_array[index] = (hidx << 1) | 0x1; +} + +/* + * + * For core kernel code by design pmd_trans_huge is never run on any hugetlbfs + * page. The hugetlbfs page table walking and mangling paths are totally + * separated form the core VM paths and they're differentiated by + * VM_HUGETLB being set on vm_flags well before any pmd_trans_huge could run. + * + * pmd_trans_huge() is defined as false at build time if + * CONFIG_TRANSPARENT_HUGEPAGE=n to optimize away code blocks at build + * time in such case. + * + * For ppc64 we need to differntiate from explicit hugepages from THP, because + * for THP we also track the subpage details at the pmd level. We don't do + * that for explicit huge pages. + * + */ +static inline int hash__pmd_trans_huge(pmd_t pmd) +{ + return !!((pmd_val(pmd) & (_PAGE_PTE | H_PAGE_THP_HUGE | _PAGE_DEVMAP)) == + (_PAGE_PTE | H_PAGE_THP_HUGE)); +} + +static inline int hash__pmd_same(pmd_t pmd_a, pmd_t pmd_b) +{ + return (((pmd_raw(pmd_a) ^ pmd_raw(pmd_b)) & ~cpu_to_be64(_PAGE_HPTEFLAGS)) == 0); +} + +static inline pmd_t hash__pmd_mkhuge(pmd_t pmd) +{ + return __pmd(pmd_val(pmd) | (_PAGE_PTE | H_PAGE_THP_HUGE)); +} + +extern unsigned long hash__pmd_hugepage_update(struct mm_struct *mm, + unsigned long addr, pmd_t *pmdp, + unsigned long clr, unsigned long set); +extern pmd_t hash__pmdp_collapse_flush(struct vm_area_struct *vma, + unsigned long address, pmd_t *pmdp); +extern void hash__pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp, + pgtable_t pgtable); +extern pgtable_t hash__pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp); +extern pmd_t hash__pmdp_huge_get_and_clear(struct mm_struct *mm, + unsigned long addr, pmd_t *pmdp); +extern int hash__has_transparent_hugepage(void); +#endif /* CONFIG_TRANSPARENT_HUGEPAGE */ + +static inline pmd_t hash__pmd_mkdevmap(pmd_t pmd) +{ + return __pmd(pmd_val(pmd) | (_PAGE_PTE | H_PAGE_THP_HUGE | _PAGE_DEVMAP)); +} + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_BOOK3S_64_HASH_64K_H */ diff --git a/arch/powerpc/include/asm/book3s/64/hash-pkey.h b/arch/powerpc/include/asm/book3s/64/hash-pkey.h new file mode 100644 index 000000000..795010897 --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/hash-pkey.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_64_HASH_PKEY_H +#define _ASM_POWERPC_BOOK3S_64_HASH_PKEY_H + +static inline u64 hash__vmflag_to_pte_pkey_bits(u64 vm_flags) +{ + return (((vm_flags & VM_PKEY_BIT0) ? H_PTE_PKEY_BIT0 : 0x0UL) | + ((vm_flags & VM_PKEY_BIT1) ? H_PTE_PKEY_BIT1 : 0x0UL) | + ((vm_flags & VM_PKEY_BIT2) ? H_PTE_PKEY_BIT2 : 0x0UL) | + ((vm_flags & VM_PKEY_BIT3) ? H_PTE_PKEY_BIT3 : 0x0UL) | + ((vm_flags & VM_PKEY_BIT4) ? H_PTE_PKEY_BIT4 : 0x0UL)); +} + +static inline u64 pte_to_hpte_pkey_bits(u64 pteflags) +{ + return (((pteflags & H_PTE_PKEY_BIT4) ? HPTE_R_KEY_BIT4 : 0x0UL) | + ((pteflags & H_PTE_PKEY_BIT3) ? HPTE_R_KEY_BIT3 : 0x0UL) | + ((pteflags & H_PTE_PKEY_BIT2) ? HPTE_R_KEY_BIT2 : 0x0UL) | + ((pteflags & H_PTE_PKEY_BIT1) ? HPTE_R_KEY_BIT1 : 0x0UL) | + ((pteflags & H_PTE_PKEY_BIT0) ? HPTE_R_KEY_BIT0 : 0x0UL)); +} + +static inline u16 hash__pte_to_pkey_bits(u64 pteflags) +{ + return (((pteflags & H_PTE_PKEY_BIT4) ? 0x10 : 0x0UL) | + ((pteflags & H_PTE_PKEY_BIT3) ? 0x8 : 0x0UL) | + ((pteflags & H_PTE_PKEY_BIT2) ? 0x4 : 0x0UL) | + ((pteflags & H_PTE_PKEY_BIT1) ? 0x2 : 0x0UL) | + ((pteflags & H_PTE_PKEY_BIT0) ? 0x1 : 0x0UL)); +} + +#endif diff --git a/arch/powerpc/include/asm/book3s/64/hash.h b/arch/powerpc/include/asm/book3s/64/hash.h new file mode 100644 index 000000000..73ad038ed --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/hash.h @@ -0,0 +1,260 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_64_HASH_H +#define _ASM_POWERPC_BOOK3S_64_HASH_H +#ifdef __KERNEL__ + +#include <asm/asm-const.h> + +/* + * Common bits between 4K and 64K pages in a linux-style PTE. + * Additional bits may be defined in pgtable-hash64-*.h + * + */ +#define H_PTE_NONE_MASK _PAGE_HPTEFLAGS + +#ifdef CONFIG_PPC_64K_PAGES +#include <asm/book3s/64/hash-64k.h> +#else +#include <asm/book3s/64/hash-4k.h> +#endif + +/* Bits to set in a PMD/PUD/PGD entry valid bit*/ +#define HASH_PMD_VAL_BITS (0x8000000000000000UL) +#define HASH_PUD_VAL_BITS (0x8000000000000000UL) +#define HASH_PGD_VAL_BITS (0x8000000000000000UL) + +/* + * Size of EA range mapped by our pagetables. + */ +#define H_PGTABLE_EADDR_SIZE (H_PTE_INDEX_SIZE + H_PMD_INDEX_SIZE + \ + H_PUD_INDEX_SIZE + H_PGD_INDEX_SIZE + PAGE_SHIFT) +#define H_PGTABLE_RANGE (ASM_CONST(1) << H_PGTABLE_EADDR_SIZE) +/* + * Top 2 bits are ignored in page table walk. + */ +#define EA_MASK (~(0xcUL << 60)) + +/* + * We store the slot details in the second half of page table. + * Increase the pud level table so that hugetlb ptes can be stored + * at pud level. + */ +#if defined(CONFIG_HUGETLB_PAGE) && defined(CONFIG_PPC_64K_PAGES) +#define H_PUD_CACHE_INDEX (H_PUD_INDEX_SIZE + 1) +#else +#define H_PUD_CACHE_INDEX (H_PUD_INDEX_SIZE) +#endif + +/* + * +------------------------------+ + * | | + * | | + * | | + * +------------------------------+ Kernel virtual map end (0xc00e000000000000) + * | | + * | | + * | 512TB/16TB of vmemmap | + * | | + * | | + * +------------------------------+ Kernel vmemmap start + * | | + * | 512TB/16TB of IO map | + * | | + * +------------------------------+ Kernel IO map start + * | | + * | 512TB/16TB of vmap | + * | | + * +------------------------------+ Kernel virt start (0xc008000000000000) + * | | + * | | + * | | + * +------------------------------+ Kernel linear (0xc.....) + */ + +#define H_VMALLOC_START H_KERN_VIRT_START +#define H_VMALLOC_SIZE H_KERN_MAP_SIZE +#define H_VMALLOC_END (H_VMALLOC_START + H_VMALLOC_SIZE) + +#define H_KERN_IO_START H_VMALLOC_END +#define H_KERN_IO_SIZE H_KERN_MAP_SIZE +#define H_KERN_IO_END (H_KERN_IO_START + H_KERN_IO_SIZE) + +#define H_VMEMMAP_START H_KERN_IO_END +#define H_VMEMMAP_SIZE H_KERN_MAP_SIZE +#define H_VMEMMAP_END (H_VMEMMAP_START + H_VMEMMAP_SIZE) + +#define NON_LINEAR_REGION_ID(ea) ((((unsigned long)ea - H_KERN_VIRT_START) >> REGION_SHIFT) + 2) + +/* + * Region IDs + */ +#define USER_REGION_ID 0 +#define LINEAR_MAP_REGION_ID 1 +#define VMALLOC_REGION_ID NON_LINEAR_REGION_ID(H_VMALLOC_START) +#define IO_REGION_ID NON_LINEAR_REGION_ID(H_KERN_IO_START) +#define VMEMMAP_REGION_ID NON_LINEAR_REGION_ID(H_VMEMMAP_START) +#define INVALID_REGION_ID (VMEMMAP_REGION_ID + 1) + +/* + * Defines the address of the vmemap area, in its own region on + * hash table CPUs. + */ +#ifdef CONFIG_PPC_MM_SLICES +#define HAVE_ARCH_UNMAPPED_AREA +#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN +#endif /* CONFIG_PPC_MM_SLICES */ + +/* PTEIDX nibble */ +#define _PTEIDX_SECONDARY 0x8 +#define _PTEIDX_GROUP_IX 0x7 + +#define H_PMD_BAD_BITS (PTE_TABLE_SIZE-1) +#define H_PUD_BAD_BITS (PMD_TABLE_SIZE-1) + +#ifndef __ASSEMBLY__ +static inline int get_region_id(unsigned long ea) +{ + int region_id; + int id = (ea >> 60UL); + + if (id == 0) + return USER_REGION_ID; + + if (id != (PAGE_OFFSET >> 60)) + return INVALID_REGION_ID; + + if (ea < H_KERN_VIRT_START) + return LINEAR_MAP_REGION_ID; + + BUILD_BUG_ON(NON_LINEAR_REGION_ID(H_VMALLOC_START) != 2); + + region_id = NON_LINEAR_REGION_ID(ea); + return region_id; +} + +#define hash__pmd_bad(pmd) (pmd_val(pmd) & H_PMD_BAD_BITS) +#define hash__pud_bad(pud) (pud_val(pud) & H_PUD_BAD_BITS) +static inline int hash__p4d_bad(p4d_t p4d) +{ + return (p4d_val(p4d) == 0); +} +#ifdef CONFIG_STRICT_KERNEL_RWX +extern void hash__mark_rodata_ro(void); +extern void hash__mark_initmem_nx(void); +#endif + +extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, unsigned long pte, int huge); +extern unsigned long htab_convert_pte_flags(unsigned long pteflags); +/* Atomic PTE updates */ +static inline unsigned long hash__pte_update(struct mm_struct *mm, + unsigned long addr, + pte_t *ptep, unsigned long clr, + unsigned long set, + int huge) +{ + __be64 old_be, tmp_be; + unsigned long old; + + __asm__ __volatile__( + "1: ldarx %0,0,%3 # pte_update\n\ + and. %1,%0,%6\n\ + bne- 1b \n\ + andc %1,%0,%4 \n\ + or %1,%1,%7\n\ + stdcx. %1,0,%3 \n\ + bne- 1b" + : "=&r" (old_be), "=&r" (tmp_be), "=m" (*ptep) + : "r" (ptep), "r" (cpu_to_be64(clr)), "m" (*ptep), + "r" (cpu_to_be64(H_PAGE_BUSY)), "r" (cpu_to_be64(set)) + : "cc" ); + /* huge pages use the old page table lock */ + if (!huge) + assert_pte_locked(mm, addr); + + old = be64_to_cpu(old_be); + if (old & H_PAGE_HASHPTE) + hpte_need_flush(mm, addr, ptep, old, huge); + + return old; +} + +/* Set the dirty and/or accessed bits atomically in a linux PTE, this + * function doesn't need to flush the hash entry + */ +static inline void hash__ptep_set_access_flags(pte_t *ptep, pte_t entry) +{ + __be64 old, tmp, val, mask; + + mask = cpu_to_be64(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_READ | _PAGE_WRITE | + _PAGE_EXEC | _PAGE_SOFT_DIRTY); + + val = pte_raw(entry) & mask; + + __asm__ __volatile__( + "1: ldarx %0,0,%4\n\ + and. %1,%0,%6\n\ + bne- 1b \n\ + or %0,%3,%0\n\ + stdcx. %0,0,%4\n\ + bne- 1b" + :"=&r" (old), "=&r" (tmp), "=m" (*ptep) + :"r" (val), "r" (ptep), "m" (*ptep), "r" (cpu_to_be64(H_PAGE_BUSY)) + :"cc"); +} + +static inline int hash__pte_same(pte_t pte_a, pte_t pte_b) +{ + return (((pte_raw(pte_a) ^ pte_raw(pte_b)) & ~cpu_to_be64(_PAGE_HPTEFLAGS)) == 0); +} + +static inline int hash__pte_none(pte_t pte) +{ + return (pte_val(pte) & ~H_PTE_NONE_MASK) == 0; +} + +unsigned long pte_get_hash_gslot(unsigned long vpn, unsigned long shift, + int ssize, real_pte_t rpte, unsigned int subpg_index); + +/* This low level function performs the actual PTE insertion + * Setting the PTE depends on the MMU type and other factors. It's + * an horrible mess that I'm not going to try to clean up now but + * I'm keeping it in one place rather than spread around + */ +static inline void hash__set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte, int percpu) +{ + /* + * Anything else just stores the PTE normally. That covers all 64-bit + * cases, and 32-bit non-hash with 32-bit PTEs. + */ + *ptep = pte; +} + +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +extern void hpte_do_hugepage_flush(struct mm_struct *mm, unsigned long addr, + pmd_t *pmdp, unsigned long old_pmd); +#else +static inline void hpte_do_hugepage_flush(struct mm_struct *mm, + unsigned long addr, pmd_t *pmdp, + unsigned long old_pmd) +{ + WARN(1, "%s called with THP disabled\n", __func__); +} +#endif /* CONFIG_TRANSPARENT_HUGEPAGE */ + + +int hash__map_kernel_page(unsigned long ea, unsigned long pa, pgprot_t prot); +extern int __meminit hash__vmemmap_create_mapping(unsigned long start, + unsigned long page_size, + unsigned long phys); +extern void hash__vmemmap_remove_mapping(unsigned long start, + unsigned long page_size); + +int hash__create_section_mapping(unsigned long start, unsigned long end, + int nid, pgprot_t prot); +int hash__remove_section_mapping(unsigned long start, unsigned long end); + +#endif /* !__ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_BOOK3S_64_HASH_H */ diff --git a/arch/powerpc/include/asm/book3s/64/hugetlb.h b/arch/powerpc/include/asm/book3s/64/hugetlb.h new file mode 100644 index 000000000..12e150e61 --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/hugetlb.h @@ -0,0 +1,136 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_64_HUGETLB_H +#define _ASM_POWERPC_BOOK3S_64_HUGETLB_H +/* + * For radix we want generic code to handle hugetlb. But then if we want + * both hash and radix to be enabled together we need to workaround the + * limitations. + */ +void radix__flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr); +void radix__local_flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr); +extern unsigned long +radix__hugetlb_get_unmapped_area(struct file *file, unsigned long addr, + unsigned long len, unsigned long pgoff, + unsigned long flags); + +extern void radix__huge_ptep_modify_prot_commit(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep, + pte_t old_pte, pte_t pte); + +static inline int hstate_get_psize(struct hstate *hstate) +{ + unsigned long shift; + + shift = huge_page_shift(hstate); + if (shift == mmu_psize_defs[MMU_PAGE_2M].shift) + return MMU_PAGE_2M; + else if (shift == mmu_psize_defs[MMU_PAGE_1G].shift) + return MMU_PAGE_1G; + else if (shift == mmu_psize_defs[MMU_PAGE_16M].shift) + return MMU_PAGE_16M; + else if (shift == mmu_psize_defs[MMU_PAGE_16G].shift) + return MMU_PAGE_16G; + else { + WARN(1, "Wrong huge page shift\n"); + return mmu_virtual_psize; + } +} + +#define __HAVE_ARCH_GIGANTIC_PAGE_RUNTIME_SUPPORTED +static inline bool gigantic_page_runtime_supported(void) +{ + /* + * We used gigantic page reservation with hypervisor assist in some case. + * We cannot use runtime allocation of gigantic pages in those platforms + * This is hash translation mode LPARs. + */ + if (firmware_has_feature(FW_FEATURE_LPAR) && !radix_enabled()) + return false; + + return true; +} + +/* hugepd entry valid bit */ +#define HUGEPD_VAL_BITS (0x8000000000000000UL) + +#define huge_ptep_modify_prot_start huge_ptep_modify_prot_start +extern pte_t huge_ptep_modify_prot_start(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep); + +#define huge_ptep_modify_prot_commit huge_ptep_modify_prot_commit +extern void huge_ptep_modify_prot_commit(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep, + pte_t old_pte, pte_t new_pte); +/* + * This should work for other subarchs too. But right now we use the + * new format only for 64bit book3s + */ +static inline pte_t *hugepd_page(hugepd_t hpd) +{ + BUG_ON(!hugepd_ok(hpd)); + /* + * We have only four bits to encode, MMU page size + */ + BUILD_BUG_ON((MMU_PAGE_COUNT - 1) > 0xf); + return __va(hpd_val(hpd) & HUGEPD_ADDR_MASK); +} + +static inline unsigned int hugepd_mmu_psize(hugepd_t hpd) +{ + return (hpd_val(hpd) & HUGEPD_SHIFT_MASK) >> 2; +} + +static inline unsigned int hugepd_shift(hugepd_t hpd) +{ + return mmu_psize_to_shift(hugepd_mmu_psize(hpd)); +} +static inline void flush_hugetlb_page(struct vm_area_struct *vma, + unsigned long vmaddr) +{ + if (radix_enabled()) + return radix__flush_hugetlb_page(vma, vmaddr); +} + +static inline pte_t *hugepte_offset(hugepd_t hpd, unsigned long addr, + unsigned int pdshift) +{ + unsigned long idx = (addr & ((1UL << pdshift) - 1)) >> hugepd_shift(hpd); + + return hugepd_page(hpd) + idx; +} + +static inline void hugepd_populate(hugepd_t *hpdp, pte_t *new, unsigned int pshift) +{ + *hpdp = __hugepd(__pa(new) | HUGEPD_VAL_BITS | (shift_to_mmu_psize(pshift) << 2)); +} + +void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr); + +static inline int check_and_get_huge_psize(int shift) +{ + int mmu_psize; + + if (shift > SLICE_HIGH_SHIFT) + return -EINVAL; + + mmu_psize = shift_to_mmu_psize(shift); + + /* + * We need to make sure that for different page sizes reported by + * firmware we only add hugetlb support for page sizes that can be + * supported by linux page table layout. + * For now we have + * Radix: 2M and 1G + * Hash: 16M and 16G + */ + if (radix_enabled()) { + if (mmu_psize != MMU_PAGE_2M && mmu_psize != MMU_PAGE_1G) + return -EINVAL; + } else { + if (mmu_psize != MMU_PAGE_16M && mmu_psize != MMU_PAGE_16G) + return -EINVAL; + } + return mmu_psize; +} + +#endif diff --git a/arch/powerpc/include/asm/book3s/64/kexec.h b/arch/powerpc/include/asm/book3s/64/kexec.h new file mode 100644 index 000000000..6b5c3a248 --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/kexec.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _ASM_POWERPC_BOOK3S_64_KEXEC_H_ +#define _ASM_POWERPC_BOOK3S_64_KEXEC_H_ + + +#define reset_sprs reset_sprs +static inline void reset_sprs(void) +{ + if (cpu_has_feature(CPU_FTR_ARCH_206)) { + mtspr(SPRN_AMR, 0); + mtspr(SPRN_UAMOR, 0); + } + + if (cpu_has_feature(CPU_FTR_ARCH_207S)) { + mtspr(SPRN_IAMR, 0); + } + + /* Do we need isync()? We are going via a kexec reset */ + isync(); +} + +#endif diff --git a/arch/powerpc/include/asm/book3s/64/kup-radix.h b/arch/powerpc/include/asm/book3s/64/kup-radix.h new file mode 100644 index 000000000..a39e2d193 --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/kup-radix.h @@ -0,0 +1,205 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H +#define _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H + +#include <linux/const.h> +#include <asm/reg.h> + +#define AMR_KUAP_BLOCK_READ UL(0x4000000000000000) +#define AMR_KUAP_BLOCK_WRITE UL(0x8000000000000000) +#define AMR_KUAP_BLOCKED (AMR_KUAP_BLOCK_READ | AMR_KUAP_BLOCK_WRITE) +#define AMR_KUAP_SHIFT 62 + +#ifdef __ASSEMBLY__ + +.macro kuap_restore_amr gpr1, gpr2 +#ifdef CONFIG_PPC_KUAP + BEGIN_MMU_FTR_SECTION_NESTED(67) + mfspr \gpr1, SPRN_AMR + ld \gpr2, STACK_REGS_KUAP(r1) + cmpd \gpr1, \gpr2 + beq 998f + isync + mtspr SPRN_AMR, \gpr2 + /* No isync required, see kuap_restore_amr() */ +998: + END_MMU_FTR_SECTION_NESTED_IFSET(MMU_FTR_RADIX_KUAP, 67) +#endif +.endm + +#ifdef CONFIG_PPC_KUAP +.macro kuap_check_amr gpr1, gpr2 +#ifdef CONFIG_PPC_KUAP_DEBUG + BEGIN_MMU_FTR_SECTION_NESTED(67) + mfspr \gpr1, SPRN_AMR + li \gpr2, (AMR_KUAP_BLOCKED >> AMR_KUAP_SHIFT) + sldi \gpr2, \gpr2, AMR_KUAP_SHIFT +999: tdne \gpr1, \gpr2 + EMIT_BUG_ENTRY 999b, __FILE__, __LINE__, (BUGFLAG_WARNING | BUGFLAG_ONCE) + END_MMU_FTR_SECTION_NESTED_IFSET(MMU_FTR_RADIX_KUAP, 67) +#endif +.endm +#endif + +.macro kuap_save_amr_and_lock gpr1, gpr2, use_cr, msr_pr_cr +#ifdef CONFIG_PPC_KUAP + BEGIN_MMU_FTR_SECTION_NESTED(67) + .ifnb \msr_pr_cr + bne \msr_pr_cr, 99f + .endif + mfspr \gpr1, SPRN_AMR + std \gpr1, STACK_REGS_KUAP(r1) + li \gpr2, (AMR_KUAP_BLOCKED >> AMR_KUAP_SHIFT) + sldi \gpr2, \gpr2, AMR_KUAP_SHIFT + cmpd \use_cr, \gpr1, \gpr2 + beq \use_cr, 99f + // We don't isync here because we very recently entered via rfid + mtspr SPRN_AMR, \gpr2 + isync +99: + END_MMU_FTR_SECTION_NESTED_IFSET(MMU_FTR_RADIX_KUAP, 67) +#endif +.endm + +#else /* !__ASSEMBLY__ */ + +#include <linux/jump_label.h> + +DECLARE_STATIC_KEY_FALSE(uaccess_flush_key); + +#ifdef CONFIG_PPC_KUAP + +#include <asm/mmu.h> +#include <asm/ptrace.h> + +static inline void kuap_restore_amr(struct pt_regs *regs, unsigned long amr) +{ + if (mmu_has_feature(MMU_FTR_RADIX_KUAP) && unlikely(regs->kuap != amr)) { + isync(); + mtspr(SPRN_AMR, regs->kuap); + /* + * No isync required here because we are about to RFI back to + * previous context before any user accesses would be made, + * which is a CSI. + */ + } +} + +static inline unsigned long kuap_get_and_check_amr(void) +{ + if (mmu_has_feature(MMU_FTR_RADIX_KUAP)) { + unsigned long amr = mfspr(SPRN_AMR); + if (IS_ENABLED(CONFIG_PPC_KUAP_DEBUG)) /* kuap_check_amr() */ + WARN_ON_ONCE(amr != AMR_KUAP_BLOCKED); + return amr; + } + return 0; +} + +static inline void kuap_check_amr(void) +{ + if (IS_ENABLED(CONFIG_PPC_KUAP_DEBUG) && mmu_has_feature(MMU_FTR_RADIX_KUAP)) + WARN_ON_ONCE(mfspr(SPRN_AMR) != AMR_KUAP_BLOCKED); +} + +/* + * We support individually allowing read or write, but we don't support nesting + * because that would require an expensive read/modify write of the AMR. + */ + +static inline unsigned long get_kuap(void) +{ + /* + * We return AMR_KUAP_BLOCKED when we don't support KUAP because + * prevent_user_access_return needs to return AMR_KUAP_BLOCKED to + * cause restore_user_access to do a flush. + * + * This has no effect in terms of actually blocking things on hash, + * so it doesn't break anything. + */ + if (!early_mmu_has_feature(MMU_FTR_RADIX_KUAP)) + return AMR_KUAP_BLOCKED; + + return mfspr(SPRN_AMR); +} + +static inline void set_kuap(unsigned long value) +{ + if (!early_mmu_has_feature(MMU_FTR_RADIX_KUAP)) + return; + + /* + * ISA v3.0B says we need a CSI (Context Synchronising Instruction) both + * before and after the move to AMR. See table 6 on page 1134. + */ + isync(); + mtspr(SPRN_AMR, value); + isync(); +} + +static inline bool +bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write) +{ + return WARN(mmu_has_feature(MMU_FTR_RADIX_KUAP) && + (regs->kuap & (is_write ? AMR_KUAP_BLOCK_WRITE : AMR_KUAP_BLOCK_READ)), + "Bug: %s fault blocked by AMR!", is_write ? "Write" : "Read"); +} +#else /* CONFIG_PPC_KUAP */ +static inline void kuap_restore_amr(struct pt_regs *regs, unsigned long amr) { } + +static inline unsigned long kuap_get_and_check_amr(void) +{ + return 0UL; +} + +static inline unsigned long get_kuap(void) +{ + return AMR_KUAP_BLOCKED; +} + +static inline void set_kuap(unsigned long value) { } +#endif /* !CONFIG_PPC_KUAP */ + +static __always_inline void allow_user_access(void __user *to, const void __user *from, + unsigned long size, unsigned long dir) +{ + // This is written so we can resolve to a single case at build time + BUILD_BUG_ON(!__builtin_constant_p(dir)); + if (dir == KUAP_READ) + set_kuap(AMR_KUAP_BLOCK_WRITE); + else if (dir == KUAP_WRITE) + set_kuap(AMR_KUAP_BLOCK_READ); + else if (dir == KUAP_READ_WRITE) + set_kuap(0); + else + BUILD_BUG(); +} + +static inline void prevent_user_access(void __user *to, const void __user *from, + unsigned long size, unsigned long dir) +{ + set_kuap(AMR_KUAP_BLOCKED); + if (static_branch_unlikely(&uaccess_flush_key)) + do_uaccess_flush(); +} + +static inline unsigned long prevent_user_access_return(void) +{ + unsigned long flags = get_kuap(); + + set_kuap(AMR_KUAP_BLOCKED); + if (static_branch_unlikely(&uaccess_flush_key)) + do_uaccess_flush(); + + return flags; +} + +static inline void restore_user_access(unsigned long flags) +{ + set_kuap(flags); + if (static_branch_unlikely(&uaccess_flush_key) && flags == AMR_KUAP_BLOCKED) + do_uaccess_flush(); +} +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H */ diff --git a/arch/powerpc/include/asm/book3s/64/mmu-hash.h b/arch/powerpc/include/asm/book3s/64/mmu-hash.h new file mode 100644 index 000000000..683a9c7d1 --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/mmu-hash.h @@ -0,0 +1,847 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_BOOK3S_64_MMU_HASH_H_ +#define _ASM_POWERPC_BOOK3S_64_MMU_HASH_H_ +/* + * PowerPC64 memory management structures + * + * Dave Engebretsen & Mike Corrigan <{engebret|mikejc}@us.ibm.com> + * PPC64 rework. + */ + +#include <asm/page.h> +#include <asm/bug.h> +#include <asm/asm-const.h> + +/* + * This is necessary to get the definition of PGTABLE_RANGE which we + * need for various slices related matters. Note that this isn't the + * complete pgtable.h but only a portion of it. + */ +#include <asm/book3s/64/pgtable.h> +#include <asm/bug.h> +#include <asm/task_size_64.h> +#include <asm/cpu_has_feature.h> + +/* + * SLB + */ + +#define SLB_NUM_BOLTED 2 +#define SLB_CACHE_ENTRIES 8 +#define SLB_MIN_SIZE 32 + +/* Bits in the SLB ESID word */ +#define SLB_ESID_V ASM_CONST(0x0000000008000000) /* valid */ + +/* Bits in the SLB VSID word */ +#define SLB_VSID_SHIFT 12 +#define SLB_VSID_SHIFT_256M SLB_VSID_SHIFT +#define SLB_VSID_SHIFT_1T 24 +#define SLB_VSID_SSIZE_SHIFT 62 +#define SLB_VSID_B ASM_CONST(0xc000000000000000) +#define SLB_VSID_B_256M ASM_CONST(0x0000000000000000) +#define SLB_VSID_B_1T ASM_CONST(0x4000000000000000) +#define SLB_VSID_KS ASM_CONST(0x0000000000000800) +#define SLB_VSID_KP ASM_CONST(0x0000000000000400) +#define SLB_VSID_N ASM_CONST(0x0000000000000200) /* no-execute */ +#define SLB_VSID_L ASM_CONST(0x0000000000000100) +#define SLB_VSID_C ASM_CONST(0x0000000000000080) /* class */ +#define SLB_VSID_LP ASM_CONST(0x0000000000000030) +#define SLB_VSID_LP_00 ASM_CONST(0x0000000000000000) +#define SLB_VSID_LP_01 ASM_CONST(0x0000000000000010) +#define SLB_VSID_LP_10 ASM_CONST(0x0000000000000020) +#define SLB_VSID_LP_11 ASM_CONST(0x0000000000000030) +#define SLB_VSID_LLP (SLB_VSID_L|SLB_VSID_LP) + +#define SLB_VSID_KERNEL (SLB_VSID_KP) +#define SLB_VSID_USER (SLB_VSID_KP|SLB_VSID_KS|SLB_VSID_C) + +#define SLBIE_C (0x08000000) +#define SLBIE_SSIZE_SHIFT 25 + +/* + * Hash table + */ + +#define HPTES_PER_GROUP 8 + +#define HPTE_V_SSIZE_SHIFT 62 +#define HPTE_V_AVPN_SHIFT 7 +#define HPTE_V_COMMON_BITS ASM_CONST(0x000fffffffffffff) +#define HPTE_V_AVPN ASM_CONST(0x3fffffffffffff80) +#define HPTE_V_AVPN_3_0 ASM_CONST(0x000fffffffffff80) +#define HPTE_V_AVPN_VAL(x) (((x) & HPTE_V_AVPN) >> HPTE_V_AVPN_SHIFT) +#define HPTE_V_COMPARE(x,y) (!(((x) ^ (y)) & 0xffffffffffffff80UL)) +#define HPTE_V_BOLTED ASM_CONST(0x0000000000000010) +#define HPTE_V_LOCK ASM_CONST(0x0000000000000008) +#define HPTE_V_LARGE ASM_CONST(0x0000000000000004) +#define HPTE_V_SECONDARY ASM_CONST(0x0000000000000002) +#define HPTE_V_VALID ASM_CONST(0x0000000000000001) + +/* + * ISA 3.0 has a different HPTE format. + */ +#define HPTE_R_3_0_SSIZE_SHIFT 58 +#define HPTE_R_3_0_SSIZE_MASK (3ull << HPTE_R_3_0_SSIZE_SHIFT) +#define HPTE_R_PP0 ASM_CONST(0x8000000000000000) +#define HPTE_R_TS ASM_CONST(0x4000000000000000) +#define HPTE_R_KEY_HI ASM_CONST(0x3000000000000000) +#define HPTE_R_KEY_BIT4 ASM_CONST(0x2000000000000000) +#define HPTE_R_KEY_BIT3 ASM_CONST(0x1000000000000000) +#define HPTE_R_RPN_SHIFT 12 +#define HPTE_R_RPN ASM_CONST(0x0ffffffffffff000) +#define HPTE_R_RPN_3_0 ASM_CONST(0x01fffffffffff000) +#define HPTE_R_PP ASM_CONST(0x0000000000000003) +#define HPTE_R_PPP ASM_CONST(0x8000000000000003) +#define HPTE_R_N ASM_CONST(0x0000000000000004) +#define HPTE_R_G ASM_CONST(0x0000000000000008) +#define HPTE_R_M ASM_CONST(0x0000000000000010) +#define HPTE_R_I ASM_CONST(0x0000000000000020) +#define HPTE_R_W ASM_CONST(0x0000000000000040) +#define HPTE_R_WIMG ASM_CONST(0x0000000000000078) +#define HPTE_R_C ASM_CONST(0x0000000000000080) +#define HPTE_R_R ASM_CONST(0x0000000000000100) +#define HPTE_R_KEY_LO ASM_CONST(0x0000000000000e00) +#define HPTE_R_KEY_BIT2 ASM_CONST(0x0000000000000800) +#define HPTE_R_KEY_BIT1 ASM_CONST(0x0000000000000400) +#define HPTE_R_KEY_BIT0 ASM_CONST(0x0000000000000200) +#define HPTE_R_KEY (HPTE_R_KEY_LO | HPTE_R_KEY_HI) + +#define HPTE_V_1TB_SEG ASM_CONST(0x4000000000000000) +#define HPTE_V_VRMA_MASK ASM_CONST(0x4001ffffff000000) + +/* Values for PP (assumes Ks=0, Kp=1) */ +#define PP_RWXX 0 /* Supervisor read/write, User none */ +#define PP_RWRX 1 /* Supervisor read/write, User read */ +#define PP_RWRW 2 /* Supervisor read/write, User read/write */ +#define PP_RXRX 3 /* Supervisor read, User read */ +#define PP_RXXX (HPTE_R_PP0 | 2) /* Supervisor read, user none */ + +/* Fields for tlbiel instruction in architecture 2.06 */ +#define TLBIEL_INVAL_SEL_MASK 0xc00 /* invalidation selector */ +#define TLBIEL_INVAL_PAGE 0x000 /* invalidate a single page */ +#define TLBIEL_INVAL_SET_LPID 0x800 /* invalidate a set for current LPID */ +#define TLBIEL_INVAL_SET 0xc00 /* invalidate a set for all LPIDs */ +#define TLBIEL_INVAL_SET_MASK 0xfff000 /* set number to inval. */ +#define TLBIEL_INVAL_SET_SHIFT 12 + +#define POWER7_TLB_SETS 128 /* # sets in POWER7 TLB */ +#define POWER8_TLB_SETS 512 /* # sets in POWER8 TLB */ +#define POWER9_TLB_SETS_HASH 256 /* # sets in POWER9 TLB Hash mode */ +#define POWER9_TLB_SETS_RADIX 128 /* # sets in POWER9 TLB Radix mode */ + +#ifndef __ASSEMBLY__ + +struct mmu_hash_ops { + void (*hpte_invalidate)(unsigned long slot, + unsigned long vpn, + int bpsize, int apsize, + int ssize, int local); + long (*hpte_updatepp)(unsigned long slot, + unsigned long newpp, + unsigned long vpn, + int bpsize, int apsize, + int ssize, unsigned long flags); + void (*hpte_updateboltedpp)(unsigned long newpp, + unsigned long ea, + int psize, int ssize); + long (*hpte_insert)(unsigned long hpte_group, + unsigned long vpn, + unsigned long prpn, + unsigned long rflags, + unsigned long vflags, + int psize, int apsize, + int ssize); + long (*hpte_remove)(unsigned long hpte_group); + int (*hpte_removebolted)(unsigned long ea, + int psize, int ssize); + void (*flush_hash_range)(unsigned long number, int local); + void (*hugepage_invalidate)(unsigned long vsid, + unsigned long addr, + unsigned char *hpte_slot_array, + int psize, int ssize, int local); + int (*resize_hpt)(unsigned long shift); + /* + * Special for kexec. + * To be called in real mode with interrupts disabled. No locks are + * taken as such, concurrent access on pre POWER5 hardware could result + * in a deadlock. + * The linear mapping is destroyed as well. + */ + void (*hpte_clear_all)(void); +}; +extern struct mmu_hash_ops mmu_hash_ops; + +struct hash_pte { + __be64 v; + __be64 r; +}; + +extern struct hash_pte *htab_address; +extern unsigned long htab_size_bytes; +extern unsigned long htab_hash_mask; + + +static inline int shift_to_mmu_psize(unsigned int shift) +{ + int psize; + + for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) + if (mmu_psize_defs[psize].shift == shift) + return psize; + return -1; +} + +static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize) +{ + if (mmu_psize_defs[mmu_psize].shift) + return mmu_psize_defs[mmu_psize].shift; + BUG(); +} + +static inline unsigned int ap_to_shift(unsigned long ap) +{ + int psize; + + for (psize = 0; psize < MMU_PAGE_COUNT; psize++) { + if (mmu_psize_defs[psize].ap == ap) + return mmu_psize_defs[psize].shift; + } + + return -1; +} + +static inline unsigned long get_sllp_encoding(int psize) +{ + unsigned long sllp; + + sllp = ((mmu_psize_defs[psize].sllp & SLB_VSID_L) >> 6) | + ((mmu_psize_defs[psize].sllp & SLB_VSID_LP) >> 4); + return sllp; +} + +#endif /* __ASSEMBLY__ */ + +/* + * Segment sizes. + * These are the values used by hardware in the B field of + * SLB entries and the first dword of MMU hashtable entries. + * The B field is 2 bits; the values 2 and 3 are unused and reserved. + */ +#define MMU_SEGSIZE_256M 0 +#define MMU_SEGSIZE_1T 1 + +/* + * encode page number shift. + * in order to fit the 78 bit va in a 64 bit variable we shift the va by + * 12 bits. This enable us to address upto 76 bit va. + * For hpt hash from a va we can ignore the page size bits of va and for + * hpte encoding we ignore up to 23 bits of va. So ignoring lower 12 bits ensure + * we work in all cases including 4k page size. + */ +#define VPN_SHIFT 12 + +/* + * HPTE Large Page (LP) details + */ +#define LP_SHIFT 12 +#define LP_BITS 8 +#define LP_MASK(i) ((0xFF >> (i)) << LP_SHIFT) + +#ifndef __ASSEMBLY__ + +static inline int slb_vsid_shift(int ssize) +{ + if (ssize == MMU_SEGSIZE_256M) + return SLB_VSID_SHIFT; + return SLB_VSID_SHIFT_1T; +} + +static inline int segment_shift(int ssize) +{ + if (ssize == MMU_SEGSIZE_256M) + return SID_SHIFT; + return SID_SHIFT_1T; +} + +/* + * This array is indexed by the LP field of the HPTE second dword. + * Since this field may contain some RPN bits, some entries are + * replicated so that we get the same value irrespective of RPN. + * The top 4 bits are the page size index (MMU_PAGE_*) for the + * actual page size, the bottom 4 bits are the base page size. + */ +extern u8 hpte_page_sizes[1 << LP_BITS]; + +static inline unsigned long __hpte_page_size(unsigned long h, unsigned long l, + bool is_base_size) +{ + unsigned int i, lp; + + if (!(h & HPTE_V_LARGE)) + return 1ul << 12; + + /* Look at the 8 bit LP value */ + lp = (l >> LP_SHIFT) & ((1 << LP_BITS) - 1); + i = hpte_page_sizes[lp]; + if (!i) + return 0; + if (!is_base_size) + i >>= 4; + return 1ul << mmu_psize_defs[i & 0xf].shift; +} + +static inline unsigned long hpte_page_size(unsigned long h, unsigned long l) +{ + return __hpte_page_size(h, l, 0); +} + +static inline unsigned long hpte_base_page_size(unsigned long h, unsigned long l) +{ + return __hpte_page_size(h, l, 1); +} + +/* + * The current system page and segment sizes + */ +extern int mmu_kernel_ssize; +extern int mmu_highuser_ssize; +extern u16 mmu_slb_size; +extern unsigned long tce_alloc_start, tce_alloc_end; + +/* + * If the processor supports 64k normal pages but not 64k cache + * inhibited pages, we have to be prepared to switch processes + * to use 4k pages when they create cache-inhibited mappings. + * If this is the case, mmu_ci_restrictions will be set to 1. + */ +extern int mmu_ci_restrictions; + +/* + * This computes the AVPN and B fields of the first dword of a HPTE, + * for use when we want to match an existing PTE. The bottom 7 bits + * of the returned value are zero. + */ +static inline unsigned long hpte_encode_avpn(unsigned long vpn, int psize, + int ssize) +{ + unsigned long v; + /* + * The AVA field omits the low-order 23 bits of the 78 bits VA. + * These bits are not needed in the PTE, because the + * low-order b of these bits are part of the byte offset + * into the virtual page and, if b < 23, the high-order + * 23-b of these bits are always used in selecting the + * PTEGs to be searched + */ + v = (vpn >> (23 - VPN_SHIFT)) & ~(mmu_psize_defs[psize].avpnm); + v <<= HPTE_V_AVPN_SHIFT; + v |= ((unsigned long) ssize) << HPTE_V_SSIZE_SHIFT; + return v; +} + +/* + * ISA v3.0 defines a new HPTE format, which differs from the old + * format in having smaller AVPN and ARPN fields, and the B field + * in the second dword instead of the first. + */ +static inline unsigned long hpte_old_to_new_v(unsigned long v) +{ + /* trim AVPN, drop B */ + return v & HPTE_V_COMMON_BITS; +} + +static inline unsigned long hpte_old_to_new_r(unsigned long v, unsigned long r) +{ + /* move B field from 1st to 2nd dword, trim ARPN */ + return (r & ~HPTE_R_3_0_SSIZE_MASK) | + (((v) >> HPTE_V_SSIZE_SHIFT) << HPTE_R_3_0_SSIZE_SHIFT); +} + +static inline unsigned long hpte_new_to_old_v(unsigned long v, unsigned long r) +{ + /* insert B field */ + return (v & HPTE_V_COMMON_BITS) | + ((r & HPTE_R_3_0_SSIZE_MASK) << + (HPTE_V_SSIZE_SHIFT - HPTE_R_3_0_SSIZE_SHIFT)); +} + +static inline unsigned long hpte_new_to_old_r(unsigned long r) +{ + /* clear out B field */ + return r & ~HPTE_R_3_0_SSIZE_MASK; +} + +static inline unsigned long hpte_get_old_v(struct hash_pte *hptep) +{ + unsigned long hpte_v; + + hpte_v = be64_to_cpu(hptep->v); + if (cpu_has_feature(CPU_FTR_ARCH_300)) + hpte_v = hpte_new_to_old_v(hpte_v, be64_to_cpu(hptep->r)); + return hpte_v; +} + +/* + * This function sets the AVPN and L fields of the HPTE appropriately + * using the base page size and actual page size. + */ +static inline unsigned long hpte_encode_v(unsigned long vpn, int base_psize, + int actual_psize, int ssize) +{ + unsigned long v; + v = hpte_encode_avpn(vpn, base_psize, ssize); + if (actual_psize != MMU_PAGE_4K) + v |= HPTE_V_LARGE; + return v; +} + +/* + * This function sets the ARPN, and LP fields of the HPTE appropriately + * for the page size. We assume the pa is already "clean" that is properly + * aligned for the requested page size + */ +static inline unsigned long hpte_encode_r(unsigned long pa, int base_psize, + int actual_psize) +{ + /* A 4K page needs no special encoding */ + if (actual_psize == MMU_PAGE_4K) + return pa & HPTE_R_RPN; + else { + unsigned int penc = mmu_psize_defs[base_psize].penc[actual_psize]; + unsigned int shift = mmu_psize_defs[actual_psize].shift; + return (pa & ~((1ul << shift) - 1)) | (penc << LP_SHIFT); + } +} + +/* + * Build a VPN_SHIFT bit shifted va given VSID, EA and segment size. + */ +static inline unsigned long hpt_vpn(unsigned long ea, + unsigned long vsid, int ssize) +{ + unsigned long mask; + int s_shift = segment_shift(ssize); + + mask = (1ul << (s_shift - VPN_SHIFT)) - 1; + return (vsid << (s_shift - VPN_SHIFT)) | ((ea >> VPN_SHIFT) & mask); +} + +/* + * This hashes a virtual address + */ +static inline unsigned long hpt_hash(unsigned long vpn, + unsigned int shift, int ssize) +{ + unsigned long mask; + unsigned long hash, vsid; + + /* VPN_SHIFT can be atmost 12 */ + if (ssize == MMU_SEGSIZE_256M) { + mask = (1ul << (SID_SHIFT - VPN_SHIFT)) - 1; + hash = (vpn >> (SID_SHIFT - VPN_SHIFT)) ^ + ((vpn & mask) >> (shift - VPN_SHIFT)); + } else { + mask = (1ul << (SID_SHIFT_1T - VPN_SHIFT)) - 1; + vsid = vpn >> (SID_SHIFT_1T - VPN_SHIFT); + hash = vsid ^ (vsid << 25) ^ + ((vpn & mask) >> (shift - VPN_SHIFT)) ; + } + return hash & 0x7fffffffffUL; +} + +#define HPTE_LOCAL_UPDATE 0x1 +#define HPTE_NOHPTE_UPDATE 0x2 + +extern int __hash_page_4K(unsigned long ea, unsigned long access, + unsigned long vsid, pte_t *ptep, unsigned long trap, + unsigned long flags, int ssize, int subpage_prot); +extern int __hash_page_64K(unsigned long ea, unsigned long access, + unsigned long vsid, pte_t *ptep, unsigned long trap, + unsigned long flags, int ssize); +struct mm_struct; +unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap); +extern int hash_page_mm(struct mm_struct *mm, unsigned long ea, + unsigned long access, unsigned long trap, + unsigned long flags); +extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap, + unsigned long dsisr); +int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid, + pte_t *ptep, unsigned long trap, unsigned long flags, + int ssize, unsigned int shift, unsigned int mmu_psize); +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +extern int __hash_page_thp(unsigned long ea, unsigned long access, + unsigned long vsid, pmd_t *pmdp, unsigned long trap, + unsigned long flags, int ssize, unsigned int psize); +#else +static inline int __hash_page_thp(unsigned long ea, unsigned long access, + unsigned long vsid, pmd_t *pmdp, + unsigned long trap, unsigned long flags, + int ssize, unsigned int psize) +{ + BUG(); + return -1; +} +#endif +extern void hash_failure_debug(unsigned long ea, unsigned long access, + unsigned long vsid, unsigned long trap, + int ssize, int psize, int lpsize, + unsigned long pte); +extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend, + unsigned long pstart, unsigned long prot, + int psize, int ssize); +int htab_remove_mapping(unsigned long vstart, unsigned long vend, + int psize, int ssize); +extern void pseries_add_gpage(u64 addr, u64 page_size, unsigned long number_of_pages); +extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr); + +extern void hash__setup_new_exec(void); + +#ifdef CONFIG_PPC_PSERIES +void hpte_init_pseries(void); +#else +static inline void hpte_init_pseries(void) { } +#endif + +extern void hpte_init_native(void); + +struct slb_entry { + u64 esid; + u64 vsid; +}; + +extern void slb_initialize(void); +void slb_flush_and_restore_bolted(void); +void slb_flush_all_realmode(void); +void __slb_restore_bolted_realmode(void); +void slb_restore_bolted_realmode(void); +void slb_save_contents(struct slb_entry *slb_ptr); +void slb_dump_contents(struct slb_entry *slb_ptr); + +extern void slb_vmalloc_update(void); +extern void slb_set_size(u16 size); +#endif /* __ASSEMBLY__ */ + +/* + * VSID allocation (256MB segment) + * + * We first generate a 37-bit "proto-VSID". Proto-VSIDs are generated + * from mmu context id and effective segment id of the address. + * + * For user processes max context id is limited to MAX_USER_CONTEXT. + * more details in get_user_context + * + * For kernel space get_kernel_context + * + * The proto-VSIDs are then scrambled into real VSIDs with the + * multiplicative hash: + * + * VSID = (proto-VSID * VSID_MULTIPLIER) % VSID_MODULUS + * + * VSID_MULTIPLIER is prime, so in particular it is + * co-prime to VSID_MODULUS, making this a 1:1 scrambling function. + * Because the modulus is 2^n-1 we can compute it efficiently without + * a divide or extra multiply (see below). The scramble function gives + * robust scattering in the hash table (at least based on some initial + * results). + * + * We use VSID 0 to indicate an invalid VSID. The means we can't use context id + * 0, because a context id of 0 and an EA of 0 gives a proto-VSID of 0, which + * will produce a VSID of 0. + * + * We also need to avoid the last segment of the last context, because that + * would give a protovsid of 0x1fffffffff. That will result in a VSID 0 + * because of the modulo operation in vsid scramble. + */ + +/* + * Max Va bits we support as of now is 68 bits. We want 19 bit + * context ID. + * Restrictions: + * GPU has restrictions of not able to access beyond 128TB + * (47 bit effective address). We also cannot do more than 20bit PID. + * For p4 and p5 which can only do 65 bit VA, we restrict our CONTEXT_BITS + * to 16 bits (ie, we can only have 2^16 pids at the same time). + */ +#define VA_BITS 68 +#define CONTEXT_BITS 19 +#define ESID_BITS (VA_BITS - (SID_SHIFT + CONTEXT_BITS)) +#define ESID_BITS_1T (VA_BITS - (SID_SHIFT_1T + CONTEXT_BITS)) + +#define ESID_BITS_MASK ((1 << ESID_BITS) - 1) +#define ESID_BITS_1T_MASK ((1 << ESID_BITS_1T) - 1) + +/* + * Now certain config support MAX_PHYSMEM more than 512TB. Hence we will need + * to use more than one context for linear mapping the kernel. + * For vmalloc and memmap, we use just one context with 512TB. With 64 byte + * struct page size, we need ony 32 TB in memmap for 2PB (51 bits (MAX_PHYSMEM_BITS)). + */ +#if (H_MAX_PHYSMEM_BITS > MAX_EA_BITS_PER_CONTEXT) +#define MAX_KERNEL_CTX_CNT (1UL << (H_MAX_PHYSMEM_BITS - MAX_EA_BITS_PER_CONTEXT)) +#else +#define MAX_KERNEL_CTX_CNT 1 +#endif + +#define MAX_VMALLOC_CTX_CNT 1 +#define MAX_IO_CTX_CNT 1 +#define MAX_VMEMMAP_CTX_CNT 1 + +/* + * 256MB segment + * The proto-VSID space has 2^(CONTEX_BITS + ESID_BITS) - 1 segments + * available for user + kernel mapping. VSID 0 is reserved as invalid, contexts + * 1-4 are used for kernel mapping. Each segment contains 2^28 bytes. Each + * context maps 2^49 bytes (512TB). + * + * We also need to avoid the last segment of the last context, because that + * would give a protovsid of 0x1fffffffff. That will result in a VSID 0 + * because of the modulo operation in vsid scramble. + * + */ +#define MAX_USER_CONTEXT ((ASM_CONST(1) << CONTEXT_BITS) - 2) + +// The + 2 accounts for INVALID_REGION and 1 more to avoid overlap with kernel +#define MIN_USER_CONTEXT (MAX_KERNEL_CTX_CNT + MAX_VMALLOC_CTX_CNT + \ + MAX_IO_CTX_CNT + MAX_VMEMMAP_CTX_CNT + 2) + +/* + * For platforms that support on 65bit VA we limit the context bits + */ +#define MAX_USER_CONTEXT_65BIT_VA ((ASM_CONST(1) << (65 - (SID_SHIFT + ESID_BITS))) - 2) + +/* + * This should be computed such that protovosid * vsid_mulitplier + * doesn't overflow 64 bits. The vsid_mutliplier should also be + * co-prime to vsid_modulus. We also need to make sure that number + * of bits in multiplied result (dividend) is less than twice the number of + * protovsid bits for our modulus optmization to work. + * + * The below table shows the current values used. + * |-------+------------+----------------------+------------+-------------------| + * | | Prime Bits | proto VSID_BITS_65VA | Total Bits | 2* prot VSID_BITS | + * |-------+------------+----------------------+------------+-------------------| + * | 1T | 24 | 25 | 49 | 50 | + * |-------+------------+----------------------+------------+-------------------| + * | 256MB | 24 | 37 | 61 | 74 | + * |-------+------------+----------------------+------------+-------------------| + * + * |-------+------------+----------------------+------------+--------------------| + * | | Prime Bits | proto VSID_BITS_68VA | Total Bits | 2* proto VSID_BITS | + * |-------+------------+----------------------+------------+--------------------| + * | 1T | 24 | 28 | 52 | 56 | + * |-------+------------+----------------------+------------+--------------------| + * | 256MB | 24 | 40 | 64 | 80 | + * |-------+------------+----------------------+------------+--------------------| + * + */ +#define VSID_MULTIPLIER_256M ASM_CONST(12538073) /* 24-bit prime */ +#define VSID_BITS_256M (VA_BITS - SID_SHIFT) +#define VSID_BITS_65_256M (65 - SID_SHIFT) +/* + * Modular multiplicative inverse of VSID_MULTIPLIER under modulo VSID_MODULUS + */ +#define VSID_MULINV_256M ASM_CONST(665548017062) + +#define VSID_MULTIPLIER_1T ASM_CONST(12538073) /* 24-bit prime */ +#define VSID_BITS_1T (VA_BITS - SID_SHIFT_1T) +#define VSID_BITS_65_1T (65 - SID_SHIFT_1T) +#define VSID_MULINV_1T ASM_CONST(209034062) + +/* 1TB VSID reserved for VRMA */ +#define VRMA_VSID 0x1ffffffUL +#define USER_VSID_RANGE (1UL << (ESID_BITS + SID_SHIFT)) + +/* 4 bits per slice and we have one slice per 1TB */ +#define SLICE_ARRAY_SIZE (H_PGTABLE_RANGE >> 41) +#define LOW_SLICE_ARRAY_SZ (BITS_PER_LONG / BITS_PER_BYTE) +#define TASK_SLICE_ARRAY_SZ(x) ((x)->hash_context->slb_addr_limit >> 41) +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_PPC_SUBPAGE_PROT +/* + * For the sub-page protection option, we extend the PGD with one of + * these. Basically we have a 3-level tree, with the top level being + * the protptrs array. To optimize speed and memory consumption when + * only addresses < 4GB are being protected, pointers to the first + * four pages of sub-page protection words are stored in the low_prot + * array. + * Each page of sub-page protection words protects 1GB (4 bytes + * protects 64k). For the 3-level tree, each page of pointers then + * protects 8TB. + */ +struct subpage_prot_table { + unsigned long maxaddr; /* only addresses < this are protected */ + unsigned int **protptrs[(TASK_SIZE_USER64 >> 43)]; + unsigned int *low_prot[4]; +}; + +#define SBP_L1_BITS (PAGE_SHIFT - 2) +#define SBP_L2_BITS (PAGE_SHIFT - 3) +#define SBP_L1_COUNT (1 << SBP_L1_BITS) +#define SBP_L2_COUNT (1 << SBP_L2_BITS) +#define SBP_L2_SHIFT (PAGE_SHIFT + SBP_L1_BITS) +#define SBP_L3_SHIFT (SBP_L2_SHIFT + SBP_L2_BITS) + +extern void subpage_prot_free(struct mm_struct *mm); +#else +static inline void subpage_prot_free(struct mm_struct *mm) {} +#endif /* CONFIG_PPC_SUBPAGE_PROT */ + +/* + * One bit per slice. We have lower slices which cover 256MB segments + * upto 4G range. That gets us 16 low slices. For the rest we track slices + * in 1TB size. + */ +struct slice_mask { + u64 low_slices; + DECLARE_BITMAP(high_slices, SLICE_NUM_HIGH); +}; + +struct hash_mm_context { + u16 user_psize; /* page size index */ + + /* SLB page size encodings*/ + unsigned char low_slices_psize[LOW_SLICE_ARRAY_SZ]; + unsigned char high_slices_psize[SLICE_ARRAY_SIZE]; + unsigned long slb_addr_limit; +#ifdef CONFIG_PPC_64K_PAGES + struct slice_mask mask_64k; +#endif + struct slice_mask mask_4k; +#ifdef CONFIG_HUGETLB_PAGE + struct slice_mask mask_16m; + struct slice_mask mask_16g; +#endif + +#ifdef CONFIG_PPC_SUBPAGE_PROT + struct subpage_prot_table *spt; +#endif /* CONFIG_PPC_SUBPAGE_PROT */ +}; + +#if 0 +/* + * The code below is equivalent to this function for arguments + * < 2^VSID_BITS, which is all this should ever be called + * with. However gcc is not clever enough to compute the + * modulus (2^n-1) without a second multiply. + */ +#define vsid_scramble(protovsid, size) \ + ((((protovsid) * VSID_MULTIPLIER_##size) % VSID_MODULUS_##size)) + +/* simplified form avoiding mod operation */ +#define vsid_scramble(protovsid, size) \ + ({ \ + unsigned long x; \ + x = (protovsid) * VSID_MULTIPLIER_##size; \ + x = (x >> VSID_BITS_##size) + (x & VSID_MODULUS_##size); \ + (x + ((x+1) >> VSID_BITS_##size)) & VSID_MODULUS_##size; \ + }) + +#else /* 1 */ +static inline unsigned long vsid_scramble(unsigned long protovsid, + unsigned long vsid_multiplier, int vsid_bits) +{ + unsigned long vsid; + unsigned long vsid_modulus = ((1UL << vsid_bits) - 1); + /* + * We have same multipler for both 256 and 1T segements now + */ + vsid = protovsid * vsid_multiplier; + vsid = (vsid >> vsid_bits) + (vsid & vsid_modulus); + return (vsid + ((vsid + 1) >> vsid_bits)) & vsid_modulus; +} + +#endif /* 1 */ + +/* Returns the segment size indicator for a user address */ +static inline int user_segment_size(unsigned long addr) +{ + /* Use 1T segments if possible for addresses >= 1T */ + if (addr >= (1UL << SID_SHIFT_1T)) + return mmu_highuser_ssize; + return MMU_SEGSIZE_256M; +} + +static inline unsigned long get_vsid(unsigned long context, unsigned long ea, + int ssize) +{ + unsigned long va_bits = VA_BITS; + unsigned long vsid_bits; + unsigned long protovsid; + + /* + * Bad address. We return VSID 0 for that + */ + if ((ea & EA_MASK) >= H_PGTABLE_RANGE) + return 0; + + if (!mmu_has_feature(MMU_FTR_68_BIT_VA)) + va_bits = 65; + + if (ssize == MMU_SEGSIZE_256M) { + vsid_bits = va_bits - SID_SHIFT; + protovsid = (context << ESID_BITS) | + ((ea >> SID_SHIFT) & ESID_BITS_MASK); + return vsid_scramble(protovsid, VSID_MULTIPLIER_256M, vsid_bits); + } + /* 1T segment */ + vsid_bits = va_bits - SID_SHIFT_1T; + protovsid = (context << ESID_BITS_1T) | + ((ea >> SID_SHIFT_1T) & ESID_BITS_1T_MASK); + return vsid_scramble(protovsid, VSID_MULTIPLIER_1T, vsid_bits); +} + +/* + * For kernel space, we use context ids as + * below. Range is 512TB per context. + * + * 0x00001 - [ 0xc000000000000000 - 0xc001ffffffffffff] + * 0x00002 - [ 0xc002000000000000 - 0xc003ffffffffffff] + * 0x00003 - [ 0xc004000000000000 - 0xc005ffffffffffff] + * 0x00004 - [ 0xc006000000000000 - 0xc007ffffffffffff] + * + * vmap, IO, vmemap + * + * 0x00005 - [ 0xc008000000000000 - 0xc009ffffffffffff] + * 0x00006 - [ 0xc00a000000000000 - 0xc00bffffffffffff] + * 0x00007 - [ 0xc00c000000000000 - 0xc00dffffffffffff] + * + */ +static inline unsigned long get_kernel_context(unsigned long ea) +{ + unsigned long region_id = get_region_id(ea); + unsigned long ctx; + /* + * Depending on Kernel config, kernel region can have one context + * or more. + */ + if (region_id == LINEAR_MAP_REGION_ID) { + /* + * We already verified ea to be not beyond the addr limit. + */ + ctx = 1 + ((ea & EA_MASK) >> MAX_EA_BITS_PER_CONTEXT); + } else + ctx = region_id + MAX_KERNEL_CTX_CNT - 1; + return ctx; +} + +/* + * This is only valid for addresses >= PAGE_OFFSET + */ +static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize) +{ + unsigned long context; + + if (!is_kernel_addr(ea)) + return 0; + + context = get_kernel_context(ea); + return get_vsid(context, ea, ssize); +} + +unsigned htab_shift_for_mem_size(unsigned long mem_size); + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_BOOK3S_64_MMU_HASH_H_ */ diff --git a/arch/powerpc/include/asm/book3s/64/mmu.h b/arch/powerpc/include/asm/book3s/64/mmu.h new file mode 100644 index 000000000..750918451 --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/mmu.h @@ -0,0 +1,278 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_64_MMU_H_ +#define _ASM_POWERPC_BOOK3S_64_MMU_H_ + +#include <asm/page.h> + +#ifndef __ASSEMBLY__ +/* + * Page size definition + * + * shift : is the "PAGE_SHIFT" value for that page size + * sllp : is a bit mask with the value of SLB L || LP to be or'ed + * directly to a slbmte "vsid" value + * penc : is the HPTE encoding mask for the "LP" field: + * + */ +struct mmu_psize_def { + unsigned int shift; /* number of bits */ + int penc[MMU_PAGE_COUNT]; /* HPTE encoding */ + unsigned int tlbiel; /* tlbiel supported for that page size */ + unsigned long avpnm; /* bits to mask out in AVPN in the HPTE */ + union { + unsigned long sllp; /* SLB L||LP (exact mask to use in slbmte) */ + unsigned long ap; /* Ap encoding used by PowerISA 3.0 */ + }; +}; +extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; +#endif /* __ASSEMBLY__ */ + +/* 64-bit classic hash table MMU */ +#include <asm/book3s/64/mmu-hash.h> + +#ifndef __ASSEMBLY__ +/* + * ISA 3.0 partition and process table entry format + */ +struct prtb_entry { + __be64 prtb0; + __be64 prtb1; +}; +extern struct prtb_entry *process_tb; + +struct patb_entry { + __be64 patb0; + __be64 patb1; +}; +extern struct patb_entry *partition_tb; + +/* Bits in patb0 field */ +#define PATB_HR (1UL << 63) +#define RPDB_MASK 0x0fffffffffffff00UL +#define RPDB_SHIFT (1UL << 8) +#define RTS1_SHIFT 61 /* top 2 bits of radix tree size */ +#define RTS1_MASK (3UL << RTS1_SHIFT) +#define RTS2_SHIFT 5 /* bottom 3 bits of radix tree size */ +#define RTS2_MASK (7UL << RTS2_SHIFT) +#define RPDS_MASK 0x1f /* root page dir. size field */ + +/* Bits in patb1 field */ +#define PATB_GR (1UL << 63) /* guest uses radix; must match HR */ +#define PRTS_MASK 0x1f /* process table size field */ +#define PRTB_MASK 0x0ffffffffffff000UL + +/* Number of supported PID bits */ +extern unsigned int mmu_pid_bits; + +/* Base PID to allocate from */ +extern unsigned int mmu_base_pid; + +/* + * memory block size used with radix translation. + */ +extern unsigned long __ro_after_init radix_mem_block_size; + +#define PRTB_SIZE_SHIFT (mmu_pid_bits + 4) +#define PRTB_ENTRIES (1ul << mmu_pid_bits) + +/* + * Power9 currently only support 64K partition table size. + */ +#define PATB_SIZE_SHIFT 16 + +typedef unsigned long mm_context_id_t; +struct spinlock; + +/* Maximum possible number of NPUs in a system. */ +#define NV_MAX_NPUS 8 + +typedef struct { + union { + /* + * We use id as the PIDR content for radix. On hash we can use + * more than one id. The extended ids are used when we start + * having address above 512TB. We allocate one extended id + * for each 512TB. The new id is then used with the 49 bit + * EA to build a new VA. We always use ESID_BITS_1T_MASK bits + * from EA and new context ids to build the new VAs. + */ + mm_context_id_t id; + mm_context_id_t extended_id[TASK_SIZE_USER64/TASK_CONTEXT_SIZE]; + }; + + /* Number of bits in the mm_cpumask */ + atomic_t active_cpus; + + /* Number of users of the external (Nest) MMU */ + atomic_t copros; + + /* Number of user space windows opened in process mm_context */ + atomic_t vas_windows; + + struct hash_mm_context *hash_context; + + unsigned long vdso_base; + /* + * pagetable fragment support + */ + void *pte_frag; + void *pmd_frag; +#ifdef CONFIG_SPAPR_TCE_IOMMU + struct list_head iommu_group_mem_list; +#endif + +#ifdef CONFIG_PPC_MEM_KEYS + /* + * Each bit represents one protection key. + * bit set -> key allocated + * bit unset -> key available for allocation + */ + u32 pkey_allocation_map; + s16 execute_only_pkey; /* key holding execute-only protection */ +#endif +} mm_context_t; + +static inline u16 mm_ctx_user_psize(mm_context_t *ctx) +{ + return ctx->hash_context->user_psize; +} + +static inline void mm_ctx_set_user_psize(mm_context_t *ctx, u16 user_psize) +{ + ctx->hash_context->user_psize = user_psize; +} + +static inline unsigned char *mm_ctx_low_slices(mm_context_t *ctx) +{ + return ctx->hash_context->low_slices_psize; +} + +static inline unsigned char *mm_ctx_high_slices(mm_context_t *ctx) +{ + return ctx->hash_context->high_slices_psize; +} + +static inline unsigned long mm_ctx_slb_addr_limit(mm_context_t *ctx) +{ + return ctx->hash_context->slb_addr_limit; +} + +static inline void mm_ctx_set_slb_addr_limit(mm_context_t *ctx, unsigned long limit) +{ + ctx->hash_context->slb_addr_limit = limit; +} + +static inline struct slice_mask *slice_mask_for_size(mm_context_t *ctx, int psize) +{ +#ifdef CONFIG_PPC_64K_PAGES + if (psize == MMU_PAGE_64K) + return &ctx->hash_context->mask_64k; +#endif +#ifdef CONFIG_HUGETLB_PAGE + if (psize == MMU_PAGE_16M) + return &ctx->hash_context->mask_16m; + if (psize == MMU_PAGE_16G) + return &ctx->hash_context->mask_16g; +#endif + BUG_ON(psize != MMU_PAGE_4K); + + return &ctx->hash_context->mask_4k; +} + +#ifdef CONFIG_PPC_SUBPAGE_PROT +static inline struct subpage_prot_table *mm_ctx_subpage_prot(mm_context_t *ctx) +{ + return ctx->hash_context->spt; +} +#endif + +/* + * The current system page and segment sizes + */ +extern int mmu_linear_psize; +extern int mmu_virtual_psize; +extern int mmu_vmalloc_psize; +extern int mmu_vmemmap_psize; +extern int mmu_io_psize; + +/* MMU initialization */ +void mmu_early_init_devtree(void); +void hash__early_init_devtree(void); +void radix__early_init_devtree(void); +#ifdef CONFIG_PPC_MEM_KEYS +void pkey_early_init_devtree(void); +#else +static inline void pkey_early_init_devtree(void) {} +#endif + +extern void hash__early_init_mmu(void); +extern void radix__early_init_mmu(void); +static inline void __init early_init_mmu(void) +{ + if (radix_enabled()) + return radix__early_init_mmu(); + return hash__early_init_mmu(); +} +extern void hash__early_init_mmu_secondary(void); +extern void radix__early_init_mmu_secondary(void); +static inline void early_init_mmu_secondary(void) +{ + if (radix_enabled()) + return radix__early_init_mmu_secondary(); + return hash__early_init_mmu_secondary(); +} + +extern void hash__setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size); +static inline void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size) +{ + /* + * Hash has more strict restrictions. At this point we don't + * know which translations we will pick. Hence go with hash + * restrictions. + */ + return hash__setup_initial_memory_limit(first_memblock_base, + first_memblock_size); +} + +#ifdef CONFIG_PPC_PSERIES +extern void radix_init_pseries(void); +#else +static inline void radix_init_pseries(void) { }; +#endif + +#ifdef CONFIG_HOTPLUG_CPU +#define arch_clear_mm_cpumask_cpu(cpu, mm) \ + do { \ + if (cpumask_test_cpu(cpu, mm_cpumask(mm))) { \ + atomic_dec(&(mm)->context.active_cpus); \ + cpumask_clear_cpu(cpu, mm_cpumask(mm)); \ + } \ + } while (0) + +void cleanup_cpu_mmu_context(void); +#endif + +static inline int get_user_context(mm_context_t *ctx, unsigned long ea) +{ + int index = ea >> MAX_EA_BITS_PER_CONTEXT; + + if (likely(index < ARRAY_SIZE(ctx->extended_id))) + return ctx->extended_id[index]; + + /* should never happen */ + WARN_ON(1); + return 0; +} + +static inline unsigned long get_user_vsid(mm_context_t *ctx, + unsigned long ea, int ssize) +{ + unsigned long context = get_user_context(ctx, ea); + + return get_vsid(context, ea, ssize); +} + +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_POWERPC_BOOK3S_64_MMU_H_ */ diff --git a/arch/powerpc/include/asm/book3s/64/pgalloc.h b/arch/powerpc/include/asm/book3s/64/pgalloc.h new file mode 100644 index 000000000..e1af0b394 --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/pgalloc.h @@ -0,0 +1,181 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_BOOK3S_64_PGALLOC_H +#define _ASM_POWERPC_BOOK3S_64_PGALLOC_H +/* + */ + +#include <linux/slab.h> +#include <linux/cpumask.h> +#include <linux/kmemleak.h> +#include <linux/percpu.h> + +struct vmemmap_backing { + struct vmemmap_backing *list; + unsigned long phys; + unsigned long virt_addr; +}; +extern struct vmemmap_backing *vmemmap_list; + +extern pmd_t *pmd_fragment_alloc(struct mm_struct *, unsigned long); +extern void pmd_fragment_free(unsigned long *); +extern void pgtable_free_tlb(struct mmu_gather *tlb, void *table, int shift); +extern void __tlb_remove_table(void *_table); +void pte_frag_destroy(void *pte_frag); + +static inline pgd_t *radix__pgd_alloc(struct mm_struct *mm) +{ +#ifdef CONFIG_PPC_64K_PAGES + return (pgd_t *)__get_free_page(pgtable_gfp_flags(mm, PGALLOC_GFP)); +#else + struct page *page; + page = alloc_pages(pgtable_gfp_flags(mm, PGALLOC_GFP | __GFP_RETRY_MAYFAIL), + 4); + if (!page) + return NULL; + return (pgd_t *) page_address(page); +#endif +} + +static inline void radix__pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ +#ifdef CONFIG_PPC_64K_PAGES + free_page((unsigned long)pgd); +#else + free_pages((unsigned long)pgd, 4); +#endif +} + +static inline pgd_t *pgd_alloc(struct mm_struct *mm) +{ + pgd_t *pgd; + + if (radix_enabled()) + return radix__pgd_alloc(mm); + + pgd = kmem_cache_alloc(PGT_CACHE(PGD_INDEX_SIZE), + pgtable_gfp_flags(mm, GFP_KERNEL)); + if (unlikely(!pgd)) + return pgd; + + /* + * Don't scan the PGD for pointers, it contains references to PUDs but + * those references are not full pointers and so can't be recognised by + * kmemleak. + */ + kmemleak_no_scan(pgd); + + /* + * With hugetlb, we don't clear the second half of the page table. + * If we share the same slab cache with the pmd or pud level table, + * we need to make sure we zero out the full table on alloc. + * With 4K we don't store slot in the second half. Hence we don't + * need to do this for 4k. + */ +#if defined(CONFIG_HUGETLB_PAGE) && defined(CONFIG_PPC_64K_PAGES) && \ + (H_PGD_INDEX_SIZE == H_PUD_CACHE_INDEX) + memset(pgd, 0, PGD_TABLE_SIZE); +#endif + return pgd; +} + +static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + if (radix_enabled()) + return radix__pgd_free(mm, pgd); + kmem_cache_free(PGT_CACHE(PGD_INDEX_SIZE), pgd); +} + +static inline void p4d_populate(struct mm_struct *mm, p4d_t *pgd, pud_t *pud) +{ + *pgd = __p4d(__pgtable_ptr_val(pud) | PGD_VAL_BITS); +} + +static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr) +{ + pud_t *pud; + + pud = kmem_cache_alloc(PGT_CACHE(PUD_CACHE_INDEX), + pgtable_gfp_flags(mm, GFP_KERNEL)); + /* + * Tell kmemleak to ignore the PUD, that means don't scan it for + * pointers and don't consider it a leak. PUDs are typically only + * referred to by their PGD, but kmemleak is not able to recognise those + * as pointers, leading to false leak reports. + */ + kmemleak_ignore(pud); + + return pud; +} + +static inline void __pud_free(pud_t *pud) +{ + struct page *page = virt_to_page(pud); + + /* + * Early pud pages allocated via memblock allocator + * can't be directly freed to slab + */ + if (PageReserved(page)) + free_reserved_page(page); + else + kmem_cache_free(PGT_CACHE(PUD_CACHE_INDEX), pud); +} + +static inline void pud_free(struct mm_struct *mm, pud_t *pud) +{ + return __pud_free(pud); +} + +static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) +{ + *pud = __pud(__pgtable_ptr_val(pmd) | PUD_VAL_BITS); +} + +static inline void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud, + unsigned long address) +{ + pgtable_free_tlb(tlb, pud, PUD_INDEX); +} + +static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr) +{ + return pmd_fragment_alloc(mm, addr); +} + +static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) +{ + pmd_fragment_free((unsigned long *)pmd); +} + +static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd, + unsigned long address) +{ + return pgtable_free_tlb(tlb, pmd, PMD_INDEX); +} + +static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, + pte_t *pte) +{ + *pmd = __pmd(__pgtable_ptr_val(pte) | PMD_VAL_BITS); +} + +static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, + pgtable_t pte_page) +{ + *pmd = __pmd(__pgtable_ptr_val(pte_page) | PMD_VAL_BITS); +} + +static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table, + unsigned long address) +{ + pgtable_free_tlb(tlb, table, PTE_INDEX); +} + +extern atomic_long_t direct_pages_count[MMU_PAGE_COUNT]; +static inline void update_page_count(int psize, long count) +{ + if (IS_ENABLED(CONFIG_PROC_FS)) + atomic_long_add(count, &direct_pages_count[psize]); +} + +#endif /* _ASM_POWERPC_BOOK3S_64_PGALLOC_H */ diff --git a/arch/powerpc/include/asm/book3s/64/pgtable-4k.h b/arch/powerpc/include/asm/book3s/64/pgtable-4k.h new file mode 100644 index 000000000..4e697bc2f --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/pgtable-4k.h @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_64_PGTABLE_4K_H +#define _ASM_POWERPC_BOOK3S_64_PGTABLE_4K_H +/* + * hash 4k can't share hugetlb and also doesn't support THP + */ +#ifndef __ASSEMBLY__ +#ifdef CONFIG_HUGETLB_PAGE +static inline int pmd_huge(pmd_t pmd) +{ + /* + * leaf pte for huge page + */ + if (radix_enabled()) + return !!(pmd_raw(pmd) & cpu_to_be64(_PAGE_PTE)); + return 0; +} + +static inline int pud_huge(pud_t pud) +{ + /* + * leaf pte for huge page + */ + if (radix_enabled()) + return !!(pud_raw(pud) & cpu_to_be64(_PAGE_PTE)); + return 0; +} + +static inline int pgd_huge(pgd_t pgd) +{ + /* + * leaf pte for huge page + */ + if (radix_enabled()) + return !!(pgd_raw(pgd) & cpu_to_be64(_PAGE_PTE)); + return 0; +} +#define pgd_huge pgd_huge +/* + * With radix , we have hugepage ptes in the pud and pmd entries. We don't + * need to setup hugepage directory for them. Our pte and page directory format + * enable us to have this enabled. + */ +static inline int hugepd_ok(hugepd_t hpd) +{ + if (radix_enabled()) + return 0; + return hash__hugepd_ok(hpd); +} +#define is_hugepd(hpd) (hugepd_ok(hpd)) + +/* + * 16M and 16G huge page directory tables are allocated from slab cache + * + */ +#define H_16M_CACHE_INDEX (PAGE_SHIFT + H_PTE_INDEX_SIZE + H_PMD_INDEX_SIZE - 24) +#define H_16G_CACHE_INDEX \ + (PAGE_SHIFT + H_PTE_INDEX_SIZE + H_PMD_INDEX_SIZE + H_PUD_INDEX_SIZE - 34) + +static inline int get_hugepd_cache_index(int index) +{ + switch (index) { + case H_16M_CACHE_INDEX: + return HTLB_16M_INDEX; + case H_16G_CACHE_INDEX: + return HTLB_16G_INDEX; + default: + BUG(); + } + /* should not reach */ +} + +#endif /* CONFIG_HUGETLB_PAGE */ + +#endif /* __ASSEMBLY__ */ + +#endif /*_ASM_POWERPC_BOOK3S_64_PGTABLE_4K_H */ diff --git a/arch/powerpc/include/asm/book3s/64/pgtable-64k.h b/arch/powerpc/include/asm/book3s/64/pgtable-64k.h new file mode 100644 index 000000000..34d101889 --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/pgtable-64k.h @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_64_PGTABLE_64K_H +#define _ASM_POWERPC_BOOK3S_64_PGTABLE_64K_H + +#ifndef __ASSEMBLY__ +#ifdef CONFIG_HUGETLB_PAGE +/* + * We have PGD_INDEX_SIZ = 12 and PTE_INDEX_SIZE = 8, so that we can have + * 16GB hugepage pte in PGD and 16MB hugepage pte at PMD; + * + * Defined in such a way that we can optimize away code block at build time + * if CONFIG_HUGETLB_PAGE=n. + * + * returns true for pmd migration entries, THP, devmap, hugetlb + * But compile time dependent on CONFIG_HUGETLB_PAGE + */ +static inline int pmd_huge(pmd_t pmd) +{ + /* + * leaf pte for huge page + */ + return !!(pmd_raw(pmd) & cpu_to_be64(_PAGE_PTE)); +} + +static inline int pud_huge(pud_t pud) +{ + /* + * leaf pte for huge page + */ + return !!(pud_raw(pud) & cpu_to_be64(_PAGE_PTE)); +} + +static inline int pgd_huge(pgd_t pgd) +{ + /* + * leaf pte for huge page + */ + return !!(pgd_raw(pgd) & cpu_to_be64(_PAGE_PTE)); +} +#define pgd_huge pgd_huge + +/* + * With 64k page size, we have hugepage ptes in the pgd and pmd entries. We don't + * need to setup hugepage directory for them. Our pte and page directory format + * enable us to have this enabled. + */ +static inline int hugepd_ok(hugepd_t hpd) +{ + return 0; +} + +#define is_hugepd(pdep) 0 + +/* + * This should never get called + */ +static inline int get_hugepd_cache_index(int index) +{ + BUG(); +} + +#endif /* CONFIG_HUGETLB_PAGE */ + +static inline int remap_4k_pfn(struct vm_area_struct *vma, unsigned long addr, + unsigned long pfn, pgprot_t prot) +{ + if (radix_enabled()) + BUG(); + return hash__remap_4k_pfn(vma, addr, pfn, prot); +} +#endif /* __ASSEMBLY__ */ +#endif /*_ASM_POWERPC_BOOK3S_64_PGTABLE_64K_H */ diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h new file mode 100644 index 000000000..2b4af824b --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/pgtable.h @@ -0,0 +1,1402 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_64_PGTABLE_H_ +#define _ASM_POWERPC_BOOK3S_64_PGTABLE_H_ + +#include <asm-generic/pgtable-nop4d.h> + +#ifndef __ASSEMBLY__ +#include <linux/mmdebug.h> +#include <linux/bug.h> +#include <linux/sizes.h> +#endif + +/* + * Common bits between hash and Radix page table + */ +#define _PAGE_BIT_SWAP_TYPE 0 + +#define _PAGE_EXEC 0x00001 /* execute permission */ +#define _PAGE_WRITE 0x00002 /* write access allowed */ +#define _PAGE_READ 0x00004 /* read access allowed */ +#define _PAGE_RW (_PAGE_READ | _PAGE_WRITE) +#define _PAGE_RWX (_PAGE_READ | _PAGE_WRITE | _PAGE_EXEC) +#define _PAGE_PRIVILEGED 0x00008 /* kernel access only */ +#define _PAGE_SAO 0x00010 /* Strong access order */ +#define _PAGE_NON_IDEMPOTENT 0x00020 /* non idempotent memory */ +#define _PAGE_TOLERANT 0x00030 /* tolerant memory, cache inhibited */ +#define _PAGE_DIRTY 0x00080 /* C: page changed */ +#define _PAGE_ACCESSED 0x00100 /* R: page referenced */ +/* + * Software bits + */ +#define _RPAGE_SW0 0x2000000000000000UL +#define _RPAGE_SW1 0x00800 +#define _RPAGE_SW2 0x00400 +#define _RPAGE_SW3 0x00200 +#define _RPAGE_RSV1 0x00040UL + +#define _RPAGE_PKEY_BIT4 0x1000000000000000UL +#define _RPAGE_PKEY_BIT3 0x0800000000000000UL +#define _RPAGE_PKEY_BIT2 0x0400000000000000UL +#define _RPAGE_PKEY_BIT1 0x0200000000000000UL +#define _RPAGE_PKEY_BIT0 0x0100000000000000UL + +#define _PAGE_PTE 0x4000000000000000UL /* distinguishes PTEs from pointers */ +#define _PAGE_PRESENT 0x8000000000000000UL /* pte contains a translation */ +/* + * We need to mark a pmd pte invalid while splitting. We can do that by clearing + * the _PAGE_PRESENT bit. But then that will be taken as a swap pte. In order to + * differentiate between two use a SW field when invalidating. + * + * We do that temporary invalidate for regular pte entry in ptep_set_access_flags + * + * This is used only when _PAGE_PRESENT is cleared. + */ +#define _PAGE_INVALID _RPAGE_SW0 + +/* + * Top and bottom bits of RPN which can be used by hash + * translation mode, because we expect them to be zero + * otherwise. + */ +#define _RPAGE_RPN0 0x01000 +#define _RPAGE_RPN1 0x02000 +#define _RPAGE_RPN43 0x0080000000000000UL +#define _RPAGE_RPN42 0x0040000000000000UL +#define _RPAGE_RPN41 0x0020000000000000UL + +/* Max physical address bit as per radix table */ +#define _RPAGE_PA_MAX 56 + +/* + * Max physical address bit we will use for now. + * + * This is mostly a hardware limitation and for now Power9 has + * a 51 bit limit. + * + * This is different from the number of physical bit required to address + * the last byte of memory. That is defined by MAX_PHYSMEM_BITS. + * MAX_PHYSMEM_BITS is a linux limitation imposed by the maximum + * number of sections we can support (SECTIONS_SHIFT). + * + * This is different from Radix page table limitation above and + * should always be less than that. The limit is done such that + * we can overload the bits between _RPAGE_PA_MAX and _PAGE_PA_MAX + * for hash linux page table specific bits. + * + * In order to be compatible with future hardware generations we keep + * some offsets and limit this for now to 53 + */ +#define _PAGE_PA_MAX 53 + +#define _PAGE_SOFT_DIRTY _RPAGE_SW3 /* software: software dirty tracking */ +#define _PAGE_SPECIAL _RPAGE_SW2 /* software: special page */ +#define _PAGE_DEVMAP _RPAGE_SW1 /* software: ZONE_DEVICE page */ + +/* + * Drivers request for cache inhibited pte mapping using _PAGE_NO_CACHE + * Instead of fixing all of them, add an alternate define which + * maps CI pte mapping. + */ +#define _PAGE_NO_CACHE _PAGE_TOLERANT +/* + * We support _RPAGE_PA_MAX bit real address in pte. On the linux side + * we are limited by _PAGE_PA_MAX. Clear everything above _PAGE_PA_MAX + * and every thing below PAGE_SHIFT; + */ +#define PTE_RPN_MASK (((1UL << _PAGE_PA_MAX) - 1) & (PAGE_MASK)) +/* + * set of bits not changed in pmd_modify. Even though we have hash specific bits + * in here, on radix we expect them to be zero. + */ +#define _HPAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \ + _PAGE_ACCESSED | H_PAGE_THP_HUGE | _PAGE_PTE | \ + _PAGE_SOFT_DIRTY | _PAGE_DEVMAP) +/* + * user access blocked by key + */ +#define _PAGE_KERNEL_RW (_PAGE_PRIVILEGED | _PAGE_RW | _PAGE_DIRTY) +#define _PAGE_KERNEL_RO (_PAGE_PRIVILEGED | _PAGE_READ) +#define _PAGE_KERNEL_RWX (_PAGE_PRIVILEGED | _PAGE_DIRTY | \ + _PAGE_RW | _PAGE_EXEC) +/* + * _PAGE_CHG_MASK masks of bits that are to be preserved across + * pgprot changes + */ +#define _PAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_SPECIAL | _PAGE_PTE | \ + _PAGE_SOFT_DIRTY | _PAGE_DEVMAP) + +/* + * We define 2 sets of base prot bits, one for basic pages (ie, + * cacheable kernel and user pages) and one for non cacheable + * pages. We always set _PAGE_COHERENT when SMP is enabled or + * the processor might need it for DMA coherency. + */ +#define _PAGE_BASE_NC (_PAGE_PRESENT | _PAGE_ACCESSED) +#define _PAGE_BASE (_PAGE_BASE_NC) + +/* Permission masks used to generate the __P and __S table, + * + * Note:__pgprot is defined in arch/powerpc/include/asm/page.h + * + * Write permissions imply read permissions for now (we could make write-only + * pages on BookE but we don't bother for now). Execute permission control is + * possible on platforms that define _PAGE_EXEC + */ +#define PAGE_NONE __pgprot(_PAGE_BASE | _PAGE_PRIVILEGED) +#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_RW) +#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_EXEC) +#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_READ) +#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_READ | _PAGE_EXEC) +#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_READ) +#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_READ | _PAGE_EXEC) + +/* Permission masks used for kernel mappings */ +#define PAGE_KERNEL __pgprot(_PAGE_BASE | _PAGE_KERNEL_RW) +#define PAGE_KERNEL_NC __pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | \ + _PAGE_TOLERANT) +#define PAGE_KERNEL_NCG __pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | \ + _PAGE_NON_IDEMPOTENT) +#define PAGE_KERNEL_X __pgprot(_PAGE_BASE | _PAGE_KERNEL_RWX) +#define PAGE_KERNEL_RO __pgprot(_PAGE_BASE | _PAGE_KERNEL_RO) +#define PAGE_KERNEL_ROX __pgprot(_PAGE_BASE | _PAGE_KERNEL_ROX) + +/* + * Protection used for kernel text. We want the debuggers to be able to + * set breakpoints anywhere, so don't write protect the kernel text + * on platforms where such control is possible. + */ +#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) || \ + defined(CONFIG_KPROBES) || defined(CONFIG_DYNAMIC_FTRACE) +#define PAGE_KERNEL_TEXT PAGE_KERNEL_X +#else +#define PAGE_KERNEL_TEXT PAGE_KERNEL_ROX +#endif + +/* Make modules code happy. We don't set RO yet */ +#define PAGE_KERNEL_EXEC PAGE_KERNEL_X +#define PAGE_AGP (PAGE_KERNEL_NC) + +#ifndef __ASSEMBLY__ +/* + * page table defines + */ +extern unsigned long __pte_index_size; +extern unsigned long __pmd_index_size; +extern unsigned long __pud_index_size; +extern unsigned long __pgd_index_size; +extern unsigned long __pud_cache_index; +#define PTE_INDEX_SIZE __pte_index_size +#define PMD_INDEX_SIZE __pmd_index_size +#define PUD_INDEX_SIZE __pud_index_size +#define PGD_INDEX_SIZE __pgd_index_size +/* pmd table use page table fragments */ +#define PMD_CACHE_INDEX 0 +#define PUD_CACHE_INDEX __pud_cache_index +/* + * Because of use of pte fragments and THP, size of page table + * are not always derived out of index size above. + */ +extern unsigned long __pte_table_size; +extern unsigned long __pmd_table_size; +extern unsigned long __pud_table_size; +extern unsigned long __pgd_table_size; +#define PTE_TABLE_SIZE __pte_table_size +#define PMD_TABLE_SIZE __pmd_table_size +#define PUD_TABLE_SIZE __pud_table_size +#define PGD_TABLE_SIZE __pgd_table_size + +extern unsigned long __pmd_val_bits; +extern unsigned long __pud_val_bits; +extern unsigned long __pgd_val_bits; +#define PMD_VAL_BITS __pmd_val_bits +#define PUD_VAL_BITS __pud_val_bits +#define PGD_VAL_BITS __pgd_val_bits + +extern unsigned long __pte_frag_nr; +#define PTE_FRAG_NR __pte_frag_nr +extern unsigned long __pte_frag_size_shift; +#define PTE_FRAG_SIZE_SHIFT __pte_frag_size_shift +#define PTE_FRAG_SIZE (1UL << PTE_FRAG_SIZE_SHIFT) + +extern unsigned long __pmd_frag_nr; +#define PMD_FRAG_NR __pmd_frag_nr +extern unsigned long __pmd_frag_size_shift; +#define PMD_FRAG_SIZE_SHIFT __pmd_frag_size_shift +#define PMD_FRAG_SIZE (1UL << PMD_FRAG_SIZE_SHIFT) + +#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE) +#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE) +#define PTRS_PER_PUD (1 << PUD_INDEX_SIZE) +#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE) + +/* PMD_SHIFT determines what a second-level page table entry can map */ +#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE) +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) + +/* PUD_SHIFT determines what a third-level page table entry can map */ +#define PUD_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE) +#define PUD_SIZE (1UL << PUD_SHIFT) +#define PUD_MASK (~(PUD_SIZE-1)) + +/* PGDIR_SHIFT determines what a fourth-level page table entry can map */ +#define PGDIR_SHIFT (PUD_SHIFT + PUD_INDEX_SIZE) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* Bits to mask out from a PMD to get to the PTE page */ +#define PMD_MASKED_BITS 0xc0000000000000ffUL +/* Bits to mask out from a PUD to get to the PMD page */ +#define PUD_MASKED_BITS 0xc0000000000000ffUL +/* Bits to mask out from a PGD to get to the PUD page */ +#define P4D_MASKED_BITS 0xc0000000000000ffUL + +/* + * Used as an indicator for rcu callback functions + */ +enum pgtable_index { + PTE_INDEX = 0, + PMD_INDEX, + PUD_INDEX, + PGD_INDEX, + /* + * Below are used with 4k page size and hugetlb + */ + HTLB_16M_INDEX, + HTLB_16G_INDEX, +}; + +extern unsigned long __vmalloc_start; +extern unsigned long __vmalloc_end; +#define VMALLOC_START __vmalloc_start +#define VMALLOC_END __vmalloc_end + +static inline unsigned int ioremap_max_order(void) +{ + if (radix_enabled()) + return PUD_SHIFT; + return 7 + PAGE_SHIFT; /* default from linux/vmalloc.h */ +} +#define IOREMAP_MAX_ORDER ioremap_max_order() + +extern unsigned long __kernel_virt_start; +extern unsigned long __kernel_io_start; +extern unsigned long __kernel_io_end; +#define KERN_VIRT_START __kernel_virt_start +#define KERN_IO_START __kernel_io_start +#define KERN_IO_END __kernel_io_end + +extern struct page *vmemmap; +extern unsigned long pci_io_base; +#endif /* __ASSEMBLY__ */ + +#include <asm/book3s/64/hash.h> +#include <asm/book3s/64/radix.h> + +#if H_MAX_PHYSMEM_BITS > R_MAX_PHYSMEM_BITS +#define MAX_PHYSMEM_BITS H_MAX_PHYSMEM_BITS +#else +#define MAX_PHYSMEM_BITS R_MAX_PHYSMEM_BITS +#endif + + +#ifdef CONFIG_PPC_64K_PAGES +#include <asm/book3s/64/pgtable-64k.h> +#else +#include <asm/book3s/64/pgtable-4k.h> +#endif + +#include <asm/barrier.h> +/* + * IO space itself carved into the PIO region (ISA and PHB IO space) and + * the ioremap space + * + * ISA_IO_BASE = KERN_IO_START, 64K reserved area + * PHB_IO_BASE = ISA_IO_BASE + 64K to ISA_IO_BASE + 2G, PHB IO spaces + * IOREMAP_BASE = ISA_IO_BASE + 2G to VMALLOC_START + PGTABLE_RANGE + */ +#define FULL_IO_SIZE 0x80000000ul +#define ISA_IO_BASE (KERN_IO_START) +#define ISA_IO_END (KERN_IO_START + 0x10000ul) +#define PHB_IO_BASE (ISA_IO_END) +#define PHB_IO_END (KERN_IO_START + FULL_IO_SIZE) +#define IOREMAP_BASE (PHB_IO_END) +#define IOREMAP_START (ioremap_bot) +#define IOREMAP_END (KERN_IO_END - FIXADDR_SIZE) +#define FIXADDR_SIZE SZ_32M + +/* Advertise special mapping type for AGP */ +#define HAVE_PAGE_AGP + +#ifndef __ASSEMBLY__ + +/* + * This is the default implementation of various PTE accessors, it's + * used in all cases except Book3S with 64K pages where we have a + * concept of sub-pages + */ +#ifndef __real_pte + +#define __real_pte(e, p, o) ((real_pte_t){(e)}) +#define __rpte_to_pte(r) ((r).pte) +#define __rpte_to_hidx(r,index) (pte_val(__rpte_to_pte(r)) >> H_PAGE_F_GIX_SHIFT) + +#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift) \ + do { \ + index = 0; \ + shift = mmu_psize_defs[psize].shift; \ + +#define pte_iterate_hashed_end() } while(0) + +/* + * We expect this to be called only for user addresses or kernel virtual + * addresses other than the linear mapping. + */ +#define pte_pagesize_index(mm, addr, pte) MMU_PAGE_4K + +#endif /* __real_pte */ + +static inline unsigned long pte_update(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, unsigned long clr, + unsigned long set, int huge) +{ + if (radix_enabled()) + return radix__pte_update(mm, addr, ptep, clr, set, huge); + return hash__pte_update(mm, addr, ptep, clr, set, huge); +} +/* + * For hash even if we have _PAGE_ACCESSED = 0, we do a pte_update. + * We currently remove entries from the hashtable regardless of whether + * the entry was young or dirty. + * + * We should be more intelligent about this but for the moment we override + * these functions and force a tlb flush unconditionally + * For radix: H_PAGE_HASHPTE should be zero. Hence we can use the same + * function for both hash and radix. + */ +static inline int __ptep_test_and_clear_young(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + unsigned long old; + + if ((pte_raw(*ptep) & cpu_to_be64(_PAGE_ACCESSED | H_PAGE_HASHPTE)) == 0) + return 0; + old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0, 0); + return (old & _PAGE_ACCESSED) != 0; +} + +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG +#define ptep_test_and_clear_young(__vma, __addr, __ptep) \ +({ \ + int __r; \ + __r = __ptep_test_and_clear_young((__vma)->vm_mm, __addr, __ptep); \ + __r; \ +}) + +static inline int __pte_write(pte_t pte) +{ + return !!(pte_raw(pte) & cpu_to_be64(_PAGE_WRITE)); +} + +#ifdef CONFIG_NUMA_BALANCING +#define pte_savedwrite pte_savedwrite +static inline bool pte_savedwrite(pte_t pte) +{ + /* + * Saved write ptes are prot none ptes that doesn't have + * privileged bit sit. We mark prot none as one which has + * present and pviliged bit set and RWX cleared. To mark + * protnone which used to have _PAGE_WRITE set we clear + * the privileged bit. + */ + return !(pte_raw(pte) & cpu_to_be64(_PAGE_RWX | _PAGE_PRIVILEGED)); +} +#else +#define pte_savedwrite pte_savedwrite +static inline bool pte_savedwrite(pte_t pte) +{ + return false; +} +#endif + +static inline int pte_write(pte_t pte) +{ + return __pte_write(pte) || pte_savedwrite(pte); +} + +static inline int pte_read(pte_t pte) +{ + return !!(pte_raw(pte) & cpu_to_be64(_PAGE_READ)); +} + +#define __HAVE_ARCH_PTEP_SET_WRPROTECT +static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) +{ + if (__pte_write(*ptep)) + pte_update(mm, addr, ptep, _PAGE_WRITE, 0, 0); + else if (unlikely(pte_savedwrite(*ptep))) + pte_update(mm, addr, ptep, 0, _PAGE_PRIVILEGED, 0); +} + +#define __HAVE_ARCH_HUGE_PTEP_SET_WRPROTECT +static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + /* + * We should not find protnone for hugetlb, but this complete the + * interface. + */ + if (__pte_write(*ptep)) + pte_update(mm, addr, ptep, _PAGE_WRITE, 0, 1); + else if (unlikely(pte_savedwrite(*ptep))) + pte_update(mm, addr, ptep, 0, _PAGE_PRIVILEGED, 1); +} + +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +static inline pte_t ptep_get_and_clear(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0, 0); + return __pte(old); +} + +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL +static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm, + unsigned long addr, + pte_t *ptep, int full) +{ + if (full && radix_enabled()) { + /* + * We know that this is a full mm pte clear and + * hence can be sure there is no parallel set_pte. + */ + return radix__ptep_get_and_clear_full(mm, addr, ptep, full); + } + return ptep_get_and_clear(mm, addr, ptep); +} + + +static inline void pte_clear(struct mm_struct *mm, unsigned long addr, + pte_t * ptep) +{ + pte_update(mm, addr, ptep, ~0UL, 0, 0); +} + +static inline int pte_dirty(pte_t pte) +{ + return !!(pte_raw(pte) & cpu_to_be64(_PAGE_DIRTY)); +} + +static inline int pte_young(pte_t pte) +{ + return !!(pte_raw(pte) & cpu_to_be64(_PAGE_ACCESSED)); +} + +static inline int pte_special(pte_t pte) +{ + return !!(pte_raw(pte) & cpu_to_be64(_PAGE_SPECIAL)); +} + +static inline bool pte_exec(pte_t pte) +{ + return !!(pte_raw(pte) & cpu_to_be64(_PAGE_EXEC)); +} + + +#ifdef CONFIG_HAVE_ARCH_SOFT_DIRTY +static inline bool pte_soft_dirty(pte_t pte) +{ + return !!(pte_raw(pte) & cpu_to_be64(_PAGE_SOFT_DIRTY)); +} + +static inline pte_t pte_mksoft_dirty(pte_t pte) +{ + return __pte_raw(pte_raw(pte) | cpu_to_be64(_PAGE_SOFT_DIRTY)); +} + +static inline pte_t pte_clear_soft_dirty(pte_t pte) +{ + return __pte_raw(pte_raw(pte) & cpu_to_be64(~_PAGE_SOFT_DIRTY)); +} +#endif /* CONFIG_HAVE_ARCH_SOFT_DIRTY */ + +#ifdef CONFIG_NUMA_BALANCING +static inline int pte_protnone(pte_t pte) +{ + return (pte_raw(pte) & cpu_to_be64(_PAGE_PRESENT | _PAGE_PTE | _PAGE_RWX)) == + cpu_to_be64(_PAGE_PRESENT | _PAGE_PTE); +} + +#define pte_mk_savedwrite pte_mk_savedwrite +static inline pte_t pte_mk_savedwrite(pte_t pte) +{ + /* + * Used by Autonuma subsystem to preserve the write bit + * while marking the pte PROT_NONE. Only allow this + * on PROT_NONE pte + */ + VM_BUG_ON((pte_raw(pte) & cpu_to_be64(_PAGE_PRESENT | _PAGE_RWX | _PAGE_PRIVILEGED)) != + cpu_to_be64(_PAGE_PRESENT | _PAGE_PRIVILEGED)); + return __pte_raw(pte_raw(pte) & cpu_to_be64(~_PAGE_PRIVILEGED)); +} + +#define pte_clear_savedwrite pte_clear_savedwrite +static inline pte_t pte_clear_savedwrite(pte_t pte) +{ + /* + * Used by KSM subsystem to make a protnone pte readonly. + */ + VM_BUG_ON(!pte_protnone(pte)); + return __pte_raw(pte_raw(pte) | cpu_to_be64(_PAGE_PRIVILEGED)); +} +#else +#define pte_clear_savedwrite pte_clear_savedwrite +static inline pte_t pte_clear_savedwrite(pte_t pte) +{ + VM_WARN_ON(1); + return __pte_raw(pte_raw(pte) & cpu_to_be64(~_PAGE_WRITE)); +} +#endif /* CONFIG_NUMA_BALANCING */ + +static inline bool pte_hw_valid(pte_t pte) +{ + return (pte_raw(pte) & cpu_to_be64(_PAGE_PRESENT | _PAGE_PTE)) == + cpu_to_be64(_PAGE_PRESENT | _PAGE_PTE); +} + +static inline int pte_present(pte_t pte) +{ + /* + * A pte is considerent present if _PAGE_PRESENT is set. + * We also need to consider the pte present which is marked + * invalid during ptep_set_access_flags. Hence we look for _PAGE_INVALID + * if we find _PAGE_PRESENT cleared. + */ + + if (pte_hw_valid(pte)) + return true; + return (pte_raw(pte) & cpu_to_be64(_PAGE_INVALID | _PAGE_PTE)) == + cpu_to_be64(_PAGE_INVALID | _PAGE_PTE); +} + +#ifdef CONFIG_PPC_MEM_KEYS +extern bool arch_pte_access_permitted(u64 pte, bool write, bool execute); +#else +static inline bool arch_pte_access_permitted(u64 pte, bool write, bool execute) +{ + return true; +} +#endif /* CONFIG_PPC_MEM_KEYS */ + +static inline bool pte_user(pte_t pte) +{ + return !(pte_raw(pte) & cpu_to_be64(_PAGE_PRIVILEGED)); +} + +#define pte_access_permitted pte_access_permitted +static inline bool pte_access_permitted(pte_t pte, bool write) +{ + /* + * _PAGE_READ is needed for any access and will be + * cleared for PROT_NONE + */ + if (!pte_present(pte) || !pte_user(pte) || !pte_read(pte)) + return false; + + if (write && !pte_write(pte)) + return false; + + return arch_pte_access_permitted(pte_val(pte), write, 0); +} + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + * + * Even if PTEs can be unsigned long long, a PFN is always an unsigned + * long for now. + */ +static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot) +{ + VM_BUG_ON(pfn >> (64 - PAGE_SHIFT)); + VM_BUG_ON((pfn << PAGE_SHIFT) & ~PTE_RPN_MASK); + + return __pte(((pte_basic_t)pfn << PAGE_SHIFT) | pgprot_val(pgprot) | _PAGE_PTE); +} + +static inline unsigned long pte_pfn(pte_t pte) +{ + return (pte_val(pte) & PTE_RPN_MASK) >> PAGE_SHIFT; +} + +/* Generic modifiers for PTE bits */ +static inline pte_t pte_wrprotect(pte_t pte) +{ + if (unlikely(pte_savedwrite(pte))) + return pte_clear_savedwrite(pte); + return __pte_raw(pte_raw(pte) & cpu_to_be64(~_PAGE_WRITE)); +} + +static inline pte_t pte_exprotect(pte_t pte) +{ + return __pte_raw(pte_raw(pte) & cpu_to_be64(~_PAGE_EXEC)); +} + +static inline pte_t pte_mkclean(pte_t pte) +{ + return __pte_raw(pte_raw(pte) & cpu_to_be64(~_PAGE_DIRTY)); +} + +static inline pte_t pte_mkold(pte_t pte) +{ + return __pte_raw(pte_raw(pte) & cpu_to_be64(~_PAGE_ACCESSED)); +} + +static inline pte_t pte_mkexec(pte_t pte) +{ + return __pte_raw(pte_raw(pte) | cpu_to_be64(_PAGE_EXEC)); +} + +static inline pte_t pte_mkwrite(pte_t pte) +{ + /* + * write implies read, hence set both + */ + return __pte_raw(pte_raw(pte) | cpu_to_be64(_PAGE_RW)); +} + +static inline pte_t pte_mkdirty(pte_t pte) +{ + return __pte_raw(pte_raw(pte) | cpu_to_be64(_PAGE_DIRTY | _PAGE_SOFT_DIRTY)); +} + +static inline pte_t pte_mkyoung(pte_t pte) +{ + return __pte_raw(pte_raw(pte) | cpu_to_be64(_PAGE_ACCESSED)); +} + +static inline pte_t pte_mkspecial(pte_t pte) +{ + return __pte_raw(pte_raw(pte) | cpu_to_be64(_PAGE_SPECIAL)); +} + +static inline pte_t pte_mkhuge(pte_t pte) +{ + return pte; +} + +static inline pte_t pte_mkdevmap(pte_t pte) +{ + return __pte_raw(pte_raw(pte) | cpu_to_be64(_PAGE_SPECIAL | _PAGE_DEVMAP)); +} + +static inline pte_t pte_mkprivileged(pte_t pte) +{ + return __pte_raw(pte_raw(pte) | cpu_to_be64(_PAGE_PRIVILEGED)); +} + +static inline pte_t pte_mkuser(pte_t pte) +{ + return __pte_raw(pte_raw(pte) & cpu_to_be64(~_PAGE_PRIVILEGED)); +} + +/* + * This is potentially called with a pmd as the argument, in which case it's not + * safe to check _PAGE_DEVMAP unless we also confirm that _PAGE_PTE is set. + * That's because the bit we use for _PAGE_DEVMAP is not reserved for software + * use in page directory entries (ie. non-ptes). + */ +static inline int pte_devmap(pte_t pte) +{ + u64 mask = cpu_to_be64(_PAGE_DEVMAP | _PAGE_PTE); + + return (pte_raw(pte) & mask) == mask; +} + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + /* FIXME!! check whether this need to be a conditional */ + return __pte_raw((pte_raw(pte) & cpu_to_be64(_PAGE_CHG_MASK)) | + cpu_to_be64(pgprot_val(newprot))); +} + +/* Encode and de-code a swap entry */ +#define MAX_SWAPFILES_CHECK() do { \ + BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > SWP_TYPE_BITS); \ + /* \ + * Don't have overlapping bits with _PAGE_HPTEFLAGS \ + * We filter HPTEFLAGS on set_pte. \ + */ \ + BUILD_BUG_ON(_PAGE_HPTEFLAGS & (0x1f << _PAGE_BIT_SWAP_TYPE)); \ + BUILD_BUG_ON(_PAGE_HPTEFLAGS & _PAGE_SWP_SOFT_DIRTY); \ + } while (0) + +#define SWP_TYPE_BITS 5 +#define __swp_type(x) (((x).val >> _PAGE_BIT_SWAP_TYPE) \ + & ((1UL << SWP_TYPE_BITS) - 1)) +#define __swp_offset(x) (((x).val & PTE_RPN_MASK) >> PAGE_SHIFT) +#define __swp_entry(type, offset) ((swp_entry_t) { \ + ((type) << _PAGE_BIT_SWAP_TYPE) \ + | (((offset) << PAGE_SHIFT) & PTE_RPN_MASK)}) +/* + * swp_entry_t must be independent of pte bits. We build a swp_entry_t from + * swap type and offset we get from swap and convert that to pte to find a + * matching pte in linux page table. + * Clear bits not found in swap entries here. + */ +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val((pte)) & ~_PAGE_PTE }) +#define __swp_entry_to_pte(x) __pte((x).val | _PAGE_PTE) +#define __pmd_to_swp_entry(pmd) (__pte_to_swp_entry(pmd_pte(pmd))) +#define __swp_entry_to_pmd(x) (pte_pmd(__swp_entry_to_pte(x))) + +#ifdef CONFIG_MEM_SOFT_DIRTY +#define _PAGE_SWP_SOFT_DIRTY (1UL << (SWP_TYPE_BITS + _PAGE_BIT_SWAP_TYPE)) +#else +#define _PAGE_SWP_SOFT_DIRTY 0UL +#endif /* CONFIG_MEM_SOFT_DIRTY */ + +#ifdef CONFIG_HAVE_ARCH_SOFT_DIRTY +static inline pte_t pte_swp_mksoft_dirty(pte_t pte) +{ + return __pte_raw(pte_raw(pte) | cpu_to_be64(_PAGE_SWP_SOFT_DIRTY)); +} + +static inline bool pte_swp_soft_dirty(pte_t pte) +{ + return !!(pte_raw(pte) & cpu_to_be64(_PAGE_SWP_SOFT_DIRTY)); +} + +static inline pte_t pte_swp_clear_soft_dirty(pte_t pte) +{ + return __pte_raw(pte_raw(pte) & cpu_to_be64(~_PAGE_SWP_SOFT_DIRTY)); +} +#endif /* CONFIG_HAVE_ARCH_SOFT_DIRTY */ + +static inline bool check_pte_access(unsigned long access, unsigned long ptev) +{ + /* + * This check for _PAGE_RWX and _PAGE_PRESENT bits + */ + if (access & ~ptev) + return false; + /* + * This check for access to privilege space + */ + if ((access & _PAGE_PRIVILEGED) != (ptev & _PAGE_PRIVILEGED)) + return false; + + return true; +} +/* + * Generic functions with hash/radix callbacks + */ + +static inline void __ptep_set_access_flags(struct vm_area_struct *vma, + pte_t *ptep, pte_t entry, + unsigned long address, + int psize) +{ + if (radix_enabled()) + return radix__ptep_set_access_flags(vma, ptep, entry, + address, psize); + return hash__ptep_set_access_flags(ptep, entry); +} + +#define __HAVE_ARCH_PTE_SAME +static inline int pte_same(pte_t pte_a, pte_t pte_b) +{ + if (radix_enabled()) + return radix__pte_same(pte_a, pte_b); + return hash__pte_same(pte_a, pte_b); +} + +static inline int pte_none(pte_t pte) +{ + if (radix_enabled()) + return radix__pte_none(pte); + return hash__pte_none(pte); +} + +static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte, int percpu) +{ + + VM_WARN_ON(!(pte_raw(pte) & cpu_to_be64(_PAGE_PTE))); + /* + * Keep the _PAGE_PTE added till we are sure we handle _PAGE_PTE + * in all the callers. + */ + pte = __pte_raw(pte_raw(pte) | cpu_to_be64(_PAGE_PTE)); + + if (radix_enabled()) + return radix__set_pte_at(mm, addr, ptep, pte, percpu); + return hash__set_pte_at(mm, addr, ptep, pte, percpu); +} + +#define _PAGE_CACHE_CTL (_PAGE_SAO | _PAGE_NON_IDEMPOTENT | _PAGE_TOLERANT) + +#define pgprot_noncached pgprot_noncached +static inline pgprot_t pgprot_noncached(pgprot_t prot) +{ + return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | + _PAGE_NON_IDEMPOTENT); +} + +#define pgprot_noncached_wc pgprot_noncached_wc +static inline pgprot_t pgprot_noncached_wc(pgprot_t prot) +{ + return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | + _PAGE_TOLERANT); +} + +#define pgprot_cached pgprot_cached +static inline pgprot_t pgprot_cached(pgprot_t prot) +{ + return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL)); +} + +#define pgprot_writecombine pgprot_writecombine +static inline pgprot_t pgprot_writecombine(pgprot_t prot) +{ + return pgprot_noncached_wc(prot); +} +/* + * check a pte mapping have cache inhibited property + */ +static inline bool pte_ci(pte_t pte) +{ + __be64 pte_v = pte_raw(pte); + + if (((pte_v & cpu_to_be64(_PAGE_CACHE_CTL)) == cpu_to_be64(_PAGE_TOLERANT)) || + ((pte_v & cpu_to_be64(_PAGE_CACHE_CTL)) == cpu_to_be64(_PAGE_NON_IDEMPOTENT))) + return true; + return false; +} + +static inline void pmd_clear(pmd_t *pmdp) +{ + if (IS_ENABLED(CONFIG_DEBUG_VM) && !radix_enabled()) { + /* + * Don't use this if we can possibly have a hash page table + * entry mapping this. + */ + WARN_ON((pmd_val(*pmdp) & (H_PAGE_HASHPTE | _PAGE_PTE)) == (H_PAGE_HASHPTE | _PAGE_PTE)); + } + *pmdp = __pmd(0); +} + +static inline int pmd_none(pmd_t pmd) +{ + return !pmd_raw(pmd); +} + +static inline int pmd_present(pmd_t pmd) +{ + /* + * A pmd is considerent present if _PAGE_PRESENT is set. + * We also need to consider the pmd present which is marked + * invalid during a split. Hence we look for _PAGE_INVALID + * if we find _PAGE_PRESENT cleared. + */ + if (pmd_raw(pmd) & cpu_to_be64(_PAGE_PRESENT | _PAGE_INVALID)) + return true; + + return false; +} + +static inline int pmd_is_serializing(pmd_t pmd) +{ + /* + * If the pmd is undergoing a split, the _PAGE_PRESENT bit is clear + * and _PAGE_INVALID is set (see pmd_present, pmdp_invalidate). + * + * This condition may also occur when flushing a pmd while flushing + * it (see ptep_modify_prot_start), so callers must ensure this + * case is fine as well. + */ + if ((pmd_raw(pmd) & cpu_to_be64(_PAGE_PRESENT | _PAGE_INVALID)) == + cpu_to_be64(_PAGE_INVALID)) + return true; + + return false; +} + +static inline int pmd_bad(pmd_t pmd) +{ + if (radix_enabled()) + return radix__pmd_bad(pmd); + return hash__pmd_bad(pmd); +} + +static inline void pud_clear(pud_t *pudp) +{ + if (IS_ENABLED(CONFIG_DEBUG_VM) && !radix_enabled()) { + /* + * Don't use this if we can possibly have a hash page table + * entry mapping this. + */ + WARN_ON((pud_val(*pudp) & (H_PAGE_HASHPTE | _PAGE_PTE)) == (H_PAGE_HASHPTE | _PAGE_PTE)); + } + *pudp = __pud(0); +} + +static inline int pud_none(pud_t pud) +{ + return !pud_raw(pud); +} + +static inline int pud_present(pud_t pud) +{ + return !!(pud_raw(pud) & cpu_to_be64(_PAGE_PRESENT)); +} + +extern struct page *pud_page(pud_t pud); +extern struct page *pmd_page(pmd_t pmd); +static inline pte_t pud_pte(pud_t pud) +{ + return __pte_raw(pud_raw(pud)); +} + +static inline pud_t pte_pud(pte_t pte) +{ + return __pud_raw(pte_raw(pte)); +} +#define pud_write(pud) pte_write(pud_pte(pud)) + +static inline int pud_bad(pud_t pud) +{ + if (radix_enabled()) + return radix__pud_bad(pud); + return hash__pud_bad(pud); +} + +#define pud_access_permitted pud_access_permitted +static inline bool pud_access_permitted(pud_t pud, bool write) +{ + return pte_access_permitted(pud_pte(pud), write); +} + +#define __p4d_raw(x) ((p4d_t) { __pgd_raw(x) }) +static inline __be64 p4d_raw(p4d_t x) +{ + return pgd_raw(x.pgd); +} + +#define p4d_write(p4d) pte_write(p4d_pte(p4d)) + +static inline void p4d_clear(p4d_t *p4dp) +{ + *p4dp = __p4d(0); +} + +static inline int p4d_none(p4d_t p4d) +{ + return !p4d_raw(p4d); +} + +static inline int p4d_present(p4d_t p4d) +{ + return !!(p4d_raw(p4d) & cpu_to_be64(_PAGE_PRESENT)); +} + +static inline pte_t p4d_pte(p4d_t p4d) +{ + return __pte_raw(p4d_raw(p4d)); +} + +static inline p4d_t pte_p4d(pte_t pte) +{ + return __p4d_raw(pte_raw(pte)); +} + +static inline int p4d_bad(p4d_t p4d) +{ + if (radix_enabled()) + return radix__p4d_bad(p4d); + return hash__p4d_bad(p4d); +} + +#define p4d_access_permitted p4d_access_permitted +static inline bool p4d_access_permitted(p4d_t p4d, bool write) +{ + return pte_access_permitted(p4d_pte(p4d), write); +} + +extern struct page *p4d_page(p4d_t p4d); + +/* Pointers in the page table tree are physical addresses */ +#define __pgtable_ptr_val(ptr) __pa(ptr) + +static inline pud_t *p4d_pgtable(p4d_t p4d) +{ + return (pud_t *)__va(p4d_val(p4d) & ~P4D_MASKED_BITS); +} + +static inline pmd_t *pud_pgtable(pud_t pud) +{ + return (pmd_t *)__va(pud_val(pud) & ~PUD_MASKED_BITS); +} + +#define pte_ERROR(e) \ + pr_err("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pmd_ERROR(e) \ + pr_err("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) +#define pud_ERROR(e) \ + pr_err("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e)) +#define pgd_ERROR(e) \ + pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + +static inline int map_kernel_page(unsigned long ea, unsigned long pa, pgprot_t prot) +{ + if (radix_enabled()) { +#if defined(CONFIG_PPC_RADIX_MMU) && defined(DEBUG_VM) + unsigned long page_size = 1 << mmu_psize_defs[mmu_io_psize].shift; + WARN((page_size != PAGE_SIZE), "I/O page size != PAGE_SIZE"); +#endif + return radix__map_kernel_page(ea, pa, prot, PAGE_SIZE); + } + return hash__map_kernel_page(ea, pa, prot); +} + +void unmap_kernel_page(unsigned long va); + +static inline int __meminit vmemmap_create_mapping(unsigned long start, + unsigned long page_size, + unsigned long phys) +{ + if (radix_enabled()) + return radix__vmemmap_create_mapping(start, page_size, phys); + return hash__vmemmap_create_mapping(start, page_size, phys); +} + +#ifdef CONFIG_MEMORY_HOTPLUG +static inline void vmemmap_remove_mapping(unsigned long start, + unsigned long page_size) +{ + if (radix_enabled()) + return radix__vmemmap_remove_mapping(start, page_size); + return hash__vmemmap_remove_mapping(start, page_size); +} +#endif + +static inline pte_t pmd_pte(pmd_t pmd) +{ + return __pte_raw(pmd_raw(pmd)); +} + +static inline pmd_t pte_pmd(pte_t pte) +{ + return __pmd_raw(pte_raw(pte)); +} + +static inline pte_t *pmdp_ptep(pmd_t *pmd) +{ + return (pte_t *)pmd; +} +#define pmd_pfn(pmd) pte_pfn(pmd_pte(pmd)) +#define pmd_dirty(pmd) pte_dirty(pmd_pte(pmd)) +#define pmd_young(pmd) pte_young(pmd_pte(pmd)) +#define pmd_mkold(pmd) pte_pmd(pte_mkold(pmd_pte(pmd))) +#define pmd_wrprotect(pmd) pte_pmd(pte_wrprotect(pmd_pte(pmd))) +#define pmd_mkdirty(pmd) pte_pmd(pte_mkdirty(pmd_pte(pmd))) +#define pmd_mkclean(pmd) pte_pmd(pte_mkclean(pmd_pte(pmd))) +#define pmd_mkyoung(pmd) pte_pmd(pte_mkyoung(pmd_pte(pmd))) +#define pmd_mkwrite(pmd) pte_pmd(pte_mkwrite(pmd_pte(pmd))) +#define pmd_mk_savedwrite(pmd) pte_pmd(pte_mk_savedwrite(pmd_pte(pmd))) +#define pmd_clear_savedwrite(pmd) pte_pmd(pte_clear_savedwrite(pmd_pte(pmd))) + +#ifdef CONFIG_HAVE_ARCH_SOFT_DIRTY +#define pmd_soft_dirty(pmd) pte_soft_dirty(pmd_pte(pmd)) +#define pmd_mksoft_dirty(pmd) pte_pmd(pte_mksoft_dirty(pmd_pte(pmd))) +#define pmd_clear_soft_dirty(pmd) pte_pmd(pte_clear_soft_dirty(pmd_pte(pmd))) + +#ifdef CONFIG_ARCH_ENABLE_THP_MIGRATION +#define pmd_swp_mksoft_dirty(pmd) pte_pmd(pte_swp_mksoft_dirty(pmd_pte(pmd))) +#define pmd_swp_soft_dirty(pmd) pte_swp_soft_dirty(pmd_pte(pmd)) +#define pmd_swp_clear_soft_dirty(pmd) pte_pmd(pte_swp_clear_soft_dirty(pmd_pte(pmd))) +#endif +#endif /* CONFIG_HAVE_ARCH_SOFT_DIRTY */ + +#ifdef CONFIG_NUMA_BALANCING +static inline int pmd_protnone(pmd_t pmd) +{ + return pte_protnone(pmd_pte(pmd)); +} +#endif /* CONFIG_NUMA_BALANCING */ + +#define pmd_write(pmd) pte_write(pmd_pte(pmd)) +#define __pmd_write(pmd) __pte_write(pmd_pte(pmd)) +#define pmd_savedwrite(pmd) pte_savedwrite(pmd_pte(pmd)) + +#define pmd_access_permitted pmd_access_permitted +static inline bool pmd_access_permitted(pmd_t pmd, bool write) +{ + /* + * pmdp_invalidate sets this combination (which is not caught by + * !pte_present() check in pte_access_permitted), to prevent + * lock-free lookups, as part of the serialize_against_pte_lookup() + * synchronisation. + * + * This also catches the case where the PTE's hardware PRESENT bit is + * cleared while TLB is flushed, which is suboptimal but should not + * be frequent. + */ + if (pmd_is_serializing(pmd)) + return false; + + return pte_access_permitted(pmd_pte(pmd), write); +} + +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +extern pmd_t pfn_pmd(unsigned long pfn, pgprot_t pgprot); +extern pmd_t mk_pmd(struct page *page, pgprot_t pgprot); +extern pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot); +extern void set_pmd_at(struct mm_struct *mm, unsigned long addr, + pmd_t *pmdp, pmd_t pmd); +static inline void update_mmu_cache_pmd(struct vm_area_struct *vma, + unsigned long addr, pmd_t *pmd) +{ +} + +extern int hash__has_transparent_hugepage(void); +static inline int has_transparent_hugepage(void) +{ + if (radix_enabled()) + return radix__has_transparent_hugepage(); + return hash__has_transparent_hugepage(); +} +#define has_transparent_hugepage has_transparent_hugepage + +static inline unsigned long +pmd_hugepage_update(struct mm_struct *mm, unsigned long addr, pmd_t *pmdp, + unsigned long clr, unsigned long set) +{ + if (radix_enabled()) + return radix__pmd_hugepage_update(mm, addr, pmdp, clr, set); + return hash__pmd_hugepage_update(mm, addr, pmdp, clr, set); +} + +/* + * returns true for pmd migration entries, THP, devmap, hugetlb + * But compile time dependent on THP config + */ +static inline int pmd_large(pmd_t pmd) +{ + return !!(pmd_raw(pmd) & cpu_to_be64(_PAGE_PTE)); +} + +/* + * For radix we should always find H_PAGE_HASHPTE zero. Hence + * the below will work for radix too + */ +static inline int __pmdp_test_and_clear_young(struct mm_struct *mm, + unsigned long addr, pmd_t *pmdp) +{ + unsigned long old; + + if ((pmd_raw(*pmdp) & cpu_to_be64(_PAGE_ACCESSED | H_PAGE_HASHPTE)) == 0) + return 0; + old = pmd_hugepage_update(mm, addr, pmdp, _PAGE_ACCESSED, 0); + return ((old & _PAGE_ACCESSED) != 0); +} + +#define __HAVE_ARCH_PMDP_SET_WRPROTECT +static inline void pmdp_set_wrprotect(struct mm_struct *mm, unsigned long addr, + pmd_t *pmdp) +{ + if (__pmd_write((*pmdp))) + pmd_hugepage_update(mm, addr, pmdp, _PAGE_WRITE, 0); + else if (unlikely(pmd_savedwrite(*pmdp))) + pmd_hugepage_update(mm, addr, pmdp, 0, _PAGE_PRIVILEGED); +} + +/* + * Only returns true for a THP. False for pmd migration entry. + * We also need to return true when we come across a pte that + * in between a thp split. While splitting THP, we mark the pmd + * invalid (pmdp_invalidate()) before we set it with pte page + * address. A pmd_trans_huge() check against a pmd entry during that time + * should return true. + * We should not call this on a hugetlb entry. We should check for HugeTLB + * entry using vma->vm_flags + * The page table walk rule is explained in Documentation/vm/transhuge.rst + */ +static inline int pmd_trans_huge(pmd_t pmd) +{ + if (!pmd_present(pmd)) + return false; + + if (radix_enabled()) + return radix__pmd_trans_huge(pmd); + return hash__pmd_trans_huge(pmd); +} + +#define __HAVE_ARCH_PMD_SAME +static inline int pmd_same(pmd_t pmd_a, pmd_t pmd_b) +{ + if (radix_enabled()) + return radix__pmd_same(pmd_a, pmd_b); + return hash__pmd_same(pmd_a, pmd_b); +} + +static inline pmd_t pmd_mkhuge(pmd_t pmd) +{ + if (radix_enabled()) + return radix__pmd_mkhuge(pmd); + return hash__pmd_mkhuge(pmd); +} + +#define __HAVE_ARCH_PMDP_SET_ACCESS_FLAGS +extern int pmdp_set_access_flags(struct vm_area_struct *vma, + unsigned long address, pmd_t *pmdp, + pmd_t entry, int dirty); + +#define __HAVE_ARCH_PMDP_TEST_AND_CLEAR_YOUNG +extern int pmdp_test_and_clear_young(struct vm_area_struct *vma, + unsigned long address, pmd_t *pmdp); + +#define __HAVE_ARCH_PMDP_HUGE_GET_AND_CLEAR +static inline pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm, + unsigned long addr, pmd_t *pmdp) +{ + if (radix_enabled()) + return radix__pmdp_huge_get_and_clear(mm, addr, pmdp); + return hash__pmdp_huge_get_and_clear(mm, addr, pmdp); +} + +static inline pmd_t pmdp_collapse_flush(struct vm_area_struct *vma, + unsigned long address, pmd_t *pmdp) +{ + if (radix_enabled()) + return radix__pmdp_collapse_flush(vma, address, pmdp); + return hash__pmdp_collapse_flush(vma, address, pmdp); +} +#define pmdp_collapse_flush pmdp_collapse_flush + +#define __HAVE_ARCH_PMDP_HUGE_GET_AND_CLEAR_FULL +pmd_t pmdp_huge_get_and_clear_full(struct vm_area_struct *vma, + unsigned long addr, + pmd_t *pmdp, int full); + +#define __HAVE_ARCH_PGTABLE_DEPOSIT +static inline void pgtable_trans_huge_deposit(struct mm_struct *mm, + pmd_t *pmdp, pgtable_t pgtable) +{ + if (radix_enabled()) + return radix__pgtable_trans_huge_deposit(mm, pmdp, pgtable); + return hash__pgtable_trans_huge_deposit(mm, pmdp, pgtable); +} + +#define __HAVE_ARCH_PGTABLE_WITHDRAW +static inline pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, + pmd_t *pmdp) +{ + if (radix_enabled()) + return radix__pgtable_trans_huge_withdraw(mm, pmdp); + return hash__pgtable_trans_huge_withdraw(mm, pmdp); +} + +#define __HAVE_ARCH_PMDP_INVALIDATE +extern pmd_t pmdp_invalidate(struct vm_area_struct *vma, unsigned long address, + pmd_t *pmdp); + +#define pmd_move_must_withdraw pmd_move_must_withdraw +struct spinlock; +extern int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl, + struct spinlock *old_pmd_ptl, + struct vm_area_struct *vma); +/* + * Hash translation mode use the deposited table to store hash pte + * slot information. + */ +#define arch_needs_pgtable_deposit arch_needs_pgtable_deposit +static inline bool arch_needs_pgtable_deposit(void) +{ + if (radix_enabled()) + return false; + return true; +} +extern void serialize_against_pte_lookup(struct mm_struct *mm); + + +static inline pmd_t pmd_mkdevmap(pmd_t pmd) +{ + if (radix_enabled()) + return radix__pmd_mkdevmap(pmd); + return hash__pmd_mkdevmap(pmd); +} + +static inline int pmd_devmap(pmd_t pmd) +{ + return pte_devmap(pmd_pte(pmd)); +} + +static inline int pud_devmap(pud_t pud) +{ + return 0; +} + +static inline int pgd_devmap(pgd_t pgd) +{ + return 0; +} +#endif /* CONFIG_TRANSPARENT_HUGEPAGE */ + +static inline int pud_pfn(pud_t pud) +{ + /* + * Currently all calls to pud_pfn() are gated around a pud_devmap() + * check so this should never be used. If it grows another user we + * want to know about it. + */ + BUILD_BUG(); + return 0; +} +#define __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION +pte_t ptep_modify_prot_start(struct vm_area_struct *, unsigned long, pte_t *); +void ptep_modify_prot_commit(struct vm_area_struct *, unsigned long, + pte_t *, pte_t, pte_t); + +/* + * Returns true for a R -> RW upgrade of pte + */ +static inline bool is_pte_rw_upgrade(unsigned long old_val, unsigned long new_val) +{ + if (!(old_val & _PAGE_READ)) + return false; + + if ((!(old_val & _PAGE_WRITE)) && (new_val & _PAGE_WRITE)) + return true; + + return false; +} + +/* + * Like pmd_huge() and pmd_large(), but works regardless of config options + */ +#define pmd_is_leaf pmd_is_leaf +#define pmd_leaf pmd_is_leaf +static inline bool pmd_is_leaf(pmd_t pmd) +{ + return !!(pmd_raw(pmd) & cpu_to_be64(_PAGE_PTE)); +} + +#define pud_is_leaf pud_is_leaf +#define pud_leaf pud_is_leaf +static inline bool pud_is_leaf(pud_t pud) +{ + return !!(pud_raw(pud) & cpu_to_be64(_PAGE_PTE)); +} + +#define p4d_is_leaf p4d_is_leaf +#define p4d_leaf p4d_is_leaf +static inline bool p4d_is_leaf(p4d_t p4d) +{ + return !!(p4d_raw(p4d) & cpu_to_be64(_PAGE_PTE)); +} + +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_POWERPC_BOOK3S_64_PGTABLE_H_ */ diff --git a/arch/powerpc/include/asm/book3s/64/pkeys.h b/arch/powerpc/include/asm/book3s/64/pkeys.h new file mode 100644 index 000000000..b7d9f4267 --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/pkeys.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef _ASM_POWERPC_BOOK3S_64_PKEYS_H +#define _ASM_POWERPC_BOOK3S_64_PKEYS_H + +#include <asm/book3s/64/hash-pkey.h> + +extern u64 __ro_after_init default_uamor; + +static inline u64 vmflag_to_pte_pkey_bits(u64 vm_flags) +{ + if (!mmu_has_feature(MMU_FTR_PKEY)) + return 0x0UL; + + if (radix_enabled()) + BUG(); + return hash__vmflag_to_pte_pkey_bits(vm_flags); +} + +static inline u16 pte_to_pkey_bits(u64 pteflags) +{ + if (radix_enabled()) + BUG(); + return hash__pte_to_pkey_bits(pteflags); +} + +#endif /*_ASM_POWERPC_KEYS_H */ diff --git a/arch/powerpc/include/asm/book3s/64/radix-4k.h b/arch/powerpc/include/asm/book3s/64/radix-4k.h new file mode 100644 index 000000000..035ceecd6 --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/radix-4k.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_PGTABLE_RADIX_4K_H +#define _ASM_POWERPC_PGTABLE_RADIX_4K_H + +/* + * For 4K page size supported index is 13/9/9/9 + */ +#define RADIX_PTE_INDEX_SIZE 9 // size: 8B << 9 = 4KB, maps 2^9 x 4K = 2MB +#define RADIX_PMD_INDEX_SIZE 9 // size: 8B << 9 = 4KB, maps 2^9 x 2MB = 1GB +#define RADIX_PUD_INDEX_SIZE 9 // size: 8B << 9 = 4KB, maps 2^9 x 1GB = 512GB +#define RADIX_PGD_INDEX_SIZE 13 // size: 8B << 13 = 64KB, maps 2^13 x 512GB = 4PB + +/* + * One fragment per page + */ +#define RADIX_PTE_FRAG_SIZE_SHIFT (RADIX_PTE_INDEX_SIZE + 3) +#define RADIX_PTE_FRAG_NR (PAGE_SIZE >> RADIX_PTE_FRAG_SIZE_SHIFT) + +#define RADIX_PMD_FRAG_SIZE_SHIFT (RADIX_PMD_INDEX_SIZE + 3) +#define RADIX_PMD_FRAG_NR (PAGE_SIZE >> RADIX_PMD_FRAG_SIZE_SHIFT) + +#endif /* _ASM_POWERPC_PGTABLE_RADIX_4K_H */ diff --git a/arch/powerpc/include/asm/book3s/64/radix-64k.h b/arch/powerpc/include/asm/book3s/64/radix-64k.h new file mode 100644 index 000000000..54e33828b --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/radix-64k.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_PGTABLE_RADIX_64K_H +#define _ASM_POWERPC_PGTABLE_RADIX_64K_H + +/* + * For 64K page size supported index is 13/9/9/5 + */ +#define RADIX_PTE_INDEX_SIZE 5 // size: 8B << 5 = 256B, maps 2^5 x 64K = 2MB +#define RADIX_PMD_INDEX_SIZE 9 // size: 8B << 9 = 4KB, maps 2^9 x 2MB = 1GB +#define RADIX_PUD_INDEX_SIZE 9 // size: 8B << 9 = 4KB, maps 2^9 x 1GB = 512GB +#define RADIX_PGD_INDEX_SIZE 13 // size: 8B << 13 = 64KB, maps 2^13 x 512GB = 4PB + +/* + * We use a 256 byte PTE page fragment in radix + * 8 bytes per each PTE entry. + */ +#define RADIX_PTE_FRAG_SIZE_SHIFT (RADIX_PTE_INDEX_SIZE + 3) +#define RADIX_PTE_FRAG_NR (PAGE_SIZE >> RADIX_PTE_FRAG_SIZE_SHIFT) + +#define RADIX_PMD_FRAG_SIZE_SHIFT (RADIX_PMD_INDEX_SIZE + 3) +#define RADIX_PMD_FRAG_NR (PAGE_SIZE >> RADIX_PMD_FRAG_SIZE_SHIFT) + +#endif /* _ASM_POWERPC_PGTABLE_RADIX_64K_H */ diff --git a/arch/powerpc/include/asm/book3s/64/radix.h b/arch/powerpc/include/asm/book3s/64/radix.h new file mode 100644 index 000000000..59cab558e --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/radix.h @@ -0,0 +1,320 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_PGTABLE_RADIX_H +#define _ASM_POWERPC_PGTABLE_RADIX_H + +#include <asm/asm-const.h> + +#ifndef __ASSEMBLY__ +#include <asm/cmpxchg.h> +#endif + +#ifdef CONFIG_PPC_64K_PAGES +#include <asm/book3s/64/radix-64k.h> +#else +#include <asm/book3s/64/radix-4k.h> +#endif + +#ifndef __ASSEMBLY__ +#include <asm/book3s/64/tlbflush-radix.h> +#include <asm/cpu_has_feature.h> +#endif + +/* An empty PTE can still have a R or C writeback */ +#define RADIX_PTE_NONE_MASK (_PAGE_DIRTY | _PAGE_ACCESSED) + +/* Bits to set in a RPMD/RPUD/RPGD */ +#define RADIX_PMD_VAL_BITS (0x8000000000000000UL | RADIX_PTE_INDEX_SIZE) +#define RADIX_PUD_VAL_BITS (0x8000000000000000UL | RADIX_PMD_INDEX_SIZE) +#define RADIX_PGD_VAL_BITS (0x8000000000000000UL | RADIX_PUD_INDEX_SIZE) + +/* Don't have anything in the reserved bits and leaf bits */ +#define RADIX_PMD_BAD_BITS 0x60000000000000e0UL +#define RADIX_PUD_BAD_BITS 0x60000000000000e0UL +#define RADIX_P4D_BAD_BITS 0x60000000000000e0UL + +#define RADIX_PMD_SHIFT (PAGE_SHIFT + RADIX_PTE_INDEX_SIZE) +#define RADIX_PUD_SHIFT (RADIX_PMD_SHIFT + RADIX_PMD_INDEX_SIZE) +#define RADIX_PGD_SHIFT (RADIX_PUD_SHIFT + RADIX_PUD_INDEX_SIZE) +/* + * Size of EA range mapped by our pagetables. + */ +#define RADIX_PGTABLE_EADDR_SIZE (RADIX_PTE_INDEX_SIZE + RADIX_PMD_INDEX_SIZE + \ + RADIX_PUD_INDEX_SIZE + RADIX_PGD_INDEX_SIZE + PAGE_SHIFT) +#define RADIX_PGTABLE_RANGE (ASM_CONST(1) << RADIX_PGTABLE_EADDR_SIZE) + +/* + * We support 52 bit address space, Use top bit for kernel + * virtual mapping. Also make sure kernel fit in the top + * quadrant. + * + * +------------------+ + * +------------------+ Kernel virtual map (0xc008000000000000) + * | | + * | | + * | | + * 0b11......+------------------+ Kernel linear map (0xc....) + * | | + * | 2 quadrant | + * | | + * 0b10......+------------------+ + * | | + * | 1 quadrant | + * | | + * 0b01......+------------------+ + * | | + * | 0 quadrant | + * | | + * 0b00......+------------------+ + * + * + * 3rd quadrant expanded: + * +------------------------------+ + * | | + * | | + * | | + * +------------------------------+ Kernel vmemmap end (0xc010000000000000) + * | | + * | 512TB | + * | | + * +------------------------------+ Kernel IO map end/vmemap start + * | | + * | 512TB | + * | | + * +------------------------------+ Kernel vmap end/ IO map start + * | | + * | 512TB | + * | | + * +------------------------------+ Kernel virt start (0xc008000000000000) + * | | + * | | + * | | + * +------------------------------+ Kernel linear (0xc.....) + */ + + +/* + * If we store section details in page->flags we can't increase the MAX_PHYSMEM_BITS + * if we increase SECTIONS_WIDTH we will not store node details in page->flags and + * page_to_nid does a page->section->node lookup + * Hence only increase for VMEMMAP. Further depending on SPARSEMEM_EXTREME reduce + * memory requirements with large number of sections. + * 51 bits is the max physical real address on POWER9 + */ + +#if defined(CONFIG_SPARSEMEM_VMEMMAP) && defined(CONFIG_SPARSEMEM_EXTREME) +#define R_MAX_PHYSMEM_BITS 51 +#else +#define R_MAX_PHYSMEM_BITS 46 +#endif + +#define RADIX_KERN_VIRT_START ASM_CONST(0xc008000000000000) +/* + * 49 = MAX_EA_BITS_PER_CONTEXT (hash specific). To make sure we pick + * the same value as hash. + */ +#define RADIX_KERN_MAP_SIZE (1UL << 49) + +#define RADIX_VMALLOC_START RADIX_KERN_VIRT_START +#define RADIX_VMALLOC_SIZE RADIX_KERN_MAP_SIZE +#define RADIX_VMALLOC_END (RADIX_VMALLOC_START + RADIX_VMALLOC_SIZE) + +#define RADIX_KERN_IO_START RADIX_VMALLOC_END +#define RADIX_KERN_IO_SIZE RADIX_KERN_MAP_SIZE +#define RADIX_KERN_IO_END (RADIX_KERN_IO_START + RADIX_KERN_IO_SIZE) + +#define RADIX_VMEMMAP_START RADIX_KERN_IO_END +#define RADIX_VMEMMAP_SIZE RADIX_KERN_MAP_SIZE +#define RADIX_VMEMMAP_END (RADIX_VMEMMAP_START + RADIX_VMEMMAP_SIZE) + +#ifndef __ASSEMBLY__ +#define RADIX_PTE_TABLE_SIZE (sizeof(pte_t) << RADIX_PTE_INDEX_SIZE) +#define RADIX_PMD_TABLE_SIZE (sizeof(pmd_t) << RADIX_PMD_INDEX_SIZE) +#define RADIX_PUD_TABLE_SIZE (sizeof(pud_t) << RADIX_PUD_INDEX_SIZE) +#define RADIX_PGD_TABLE_SIZE (sizeof(pgd_t) << RADIX_PGD_INDEX_SIZE) + +#ifdef CONFIG_STRICT_KERNEL_RWX +extern void radix__mark_rodata_ro(void); +extern void radix__mark_initmem_nx(void); +#endif + +extern void radix__ptep_set_access_flags(struct vm_area_struct *vma, pte_t *ptep, + pte_t entry, unsigned long address, + int psize); + +extern void radix__ptep_modify_prot_commit(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep, + pte_t old_pte, pte_t pte); + +static inline unsigned long __radix_pte_update(pte_t *ptep, unsigned long clr, + unsigned long set) +{ + __be64 old_be, tmp_be; + + __asm__ __volatile__( + "1: ldarx %0,0,%3 # pte_update\n" + " andc %1,%0,%5 \n" + " or %1,%1,%4 \n" + " stdcx. %1,0,%3 \n" + " bne- 1b" + : "=&r" (old_be), "=&r" (tmp_be), "=m" (*ptep) + : "r" (ptep), "r" (cpu_to_be64(set)), "r" (cpu_to_be64(clr)) + : "cc" ); + + return be64_to_cpu(old_be); +} + +static inline unsigned long radix__pte_update(struct mm_struct *mm, + unsigned long addr, + pte_t *ptep, unsigned long clr, + unsigned long set, + int huge) +{ + unsigned long old_pte; + + old_pte = __radix_pte_update(ptep, clr, set); + if (!huge) + assert_pte_locked(mm, addr); + + return old_pte; +} + +static inline pte_t radix__ptep_get_and_clear_full(struct mm_struct *mm, + unsigned long addr, + pte_t *ptep, int full) +{ + unsigned long old_pte; + + if (full) { + old_pte = pte_val(*ptep); + *ptep = __pte(0); + } else + old_pte = radix__pte_update(mm, addr, ptep, ~0ul, 0, 0); + + return __pte(old_pte); +} + +static inline int radix__pte_same(pte_t pte_a, pte_t pte_b) +{ + return ((pte_raw(pte_a) ^ pte_raw(pte_b)) == 0); +} + +static inline int radix__pte_none(pte_t pte) +{ + return (pte_val(pte) & ~RADIX_PTE_NONE_MASK) == 0; +} + +static inline void radix__set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte, int percpu) +{ + *ptep = pte; + + /* + * The architecture suggests a ptesync after setting the pte, which + * orders the store that updates the pte with subsequent page table + * walk accesses which may load the pte. Without this it may be + * possible for a subsequent access to result in spurious fault. + * + * This is not necessary for correctness, because a spurious fault + * is tolerated by the page fault handler, and this store will + * eventually be seen. In testing, there was no noticable increase + * in user faults on POWER9. Avoiding ptesync here is a significant + * win for things like fork. If a future microarchitecture benefits + * from ptesync, it should probably go into update_mmu_cache, rather + * than set_pte_at (which is used to set ptes unrelated to faults). + * + * Spurious faults from the kernel memory are not tolerated, so there + * is a ptesync in flush_cache_vmap, and __map_kernel_page() follows + * the pte update sequence from ISA Book III 6.10 Translation Table + * Update Synchronization Requirements. + */ +} + +static inline int radix__pmd_bad(pmd_t pmd) +{ + return !!(pmd_val(pmd) & RADIX_PMD_BAD_BITS); +} + +static inline int radix__pmd_same(pmd_t pmd_a, pmd_t pmd_b) +{ + return ((pmd_raw(pmd_a) ^ pmd_raw(pmd_b)) == 0); +} + +static inline int radix__pud_bad(pud_t pud) +{ + return !!(pud_val(pud) & RADIX_PUD_BAD_BITS); +} + + +static inline int radix__p4d_bad(p4d_t p4d) +{ + return !!(p4d_val(p4d) & RADIX_P4D_BAD_BITS); +} + +#ifdef CONFIG_TRANSPARENT_HUGEPAGE + +static inline int radix__pmd_trans_huge(pmd_t pmd) +{ + return (pmd_val(pmd) & (_PAGE_PTE | _PAGE_DEVMAP)) == _PAGE_PTE; +} + +static inline pmd_t radix__pmd_mkhuge(pmd_t pmd) +{ + return __pmd(pmd_val(pmd) | _PAGE_PTE); +} + +extern unsigned long radix__pmd_hugepage_update(struct mm_struct *mm, unsigned long addr, + pmd_t *pmdp, unsigned long clr, + unsigned long set); +extern pmd_t radix__pmdp_collapse_flush(struct vm_area_struct *vma, + unsigned long address, pmd_t *pmdp); +extern void radix__pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp, + pgtable_t pgtable); +extern pgtable_t radix__pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp); +extern pmd_t radix__pmdp_huge_get_and_clear(struct mm_struct *mm, + unsigned long addr, pmd_t *pmdp); +static inline int radix__has_transparent_hugepage(void) +{ + /* For radix 2M at PMD level means thp */ + if (mmu_psize_defs[MMU_PAGE_2M].shift == PMD_SHIFT) + return 1; + return 0; +} +#endif + +static inline pmd_t radix__pmd_mkdevmap(pmd_t pmd) +{ + return __pmd(pmd_val(pmd) | (_PAGE_PTE | _PAGE_DEVMAP)); +} + +extern int __meminit radix__vmemmap_create_mapping(unsigned long start, + unsigned long page_size, + unsigned long phys); +extern void radix__vmemmap_remove_mapping(unsigned long start, + unsigned long page_size); + +extern int radix__map_kernel_page(unsigned long ea, unsigned long pa, + pgprot_t flags, unsigned int psz); + +static inline unsigned long radix__get_tree_size(void) +{ + unsigned long rts_field; + /* + * We support 52 bits, hence: + * bits 52 - 31 = 21, 0b10101 + * RTS encoding details + * bits 0 - 3 of rts -> bits 6 - 8 unsigned long + * bits 4 - 5 of rts -> bits 62 - 63 of unsigned long + */ + rts_field = (0x5UL << 5); /* 6 - 8 bits */ + rts_field |= (0x2UL << 61); + + return rts_field; +} + +#ifdef CONFIG_MEMORY_HOTPLUG +int radix__create_section_mapping(unsigned long start, unsigned long end, + int nid, pgprot_t prot); +int radix__remove_section_mapping(unsigned long start, unsigned long end); +#endif /* CONFIG_MEMORY_HOTPLUG */ +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/powerpc/include/asm/book3s/64/slice.h b/arch/powerpc/include/asm/book3s/64/slice.h new file mode 100644 index 000000000..f0d3194ba --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/slice.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_64_SLICE_H +#define _ASM_POWERPC_BOOK3S_64_SLICE_H + +#define SLICE_LOW_SHIFT 28 +#define SLICE_LOW_TOP (0x100000000ul) +#define SLICE_NUM_LOW (SLICE_LOW_TOP >> SLICE_LOW_SHIFT) +#define GET_LOW_SLICE_INDEX(addr) ((addr) >> SLICE_LOW_SHIFT) + +#define SLICE_HIGH_SHIFT 40 +#define SLICE_NUM_HIGH (H_PGTABLE_RANGE >> SLICE_HIGH_SHIFT) +#define GET_HIGH_SLICE_INDEX(addr) ((addr) >> SLICE_HIGH_SHIFT) + +#define SLB_ADDR_LIMIT_DEFAULT DEFAULT_MAP_WINDOW_USER64 + +#endif /* _ASM_POWERPC_BOOK3S_64_SLICE_H */ diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h b/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h new file mode 100644 index 000000000..3b9576973 --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h @@ -0,0 +1,119 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_64_TLBFLUSH_HASH_H +#define _ASM_POWERPC_BOOK3S_64_TLBFLUSH_HASH_H + +/* + * TLB flushing for 64-bit hash-MMU CPUs + */ + +#include <linux/percpu.h> +#include <asm/page.h> + +#define PPC64_TLB_BATCH_NR 192 + +struct ppc64_tlb_batch { + int active; + unsigned long index; + struct mm_struct *mm; + real_pte_t pte[PPC64_TLB_BATCH_NR]; + unsigned long vpn[PPC64_TLB_BATCH_NR]; + unsigned int psize; + int ssize; +}; +DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch); + +extern void __flush_tlb_pending(struct ppc64_tlb_batch *batch); + +#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE + +static inline void arch_enter_lazy_mmu_mode(void) +{ + struct ppc64_tlb_batch *batch; + + if (radix_enabled()) + return; + batch = this_cpu_ptr(&ppc64_tlb_batch); + batch->active = 1; +} + +static inline void arch_leave_lazy_mmu_mode(void) +{ + struct ppc64_tlb_batch *batch; + + if (radix_enabled()) + return; + batch = this_cpu_ptr(&ppc64_tlb_batch); + + if (batch->index) + __flush_tlb_pending(batch); + batch->active = 0; +} + +#define arch_flush_lazy_mmu_mode() do {} while (0) + +extern void hash__tlbiel_all(unsigned int action); + +extern void flush_hash_page(unsigned long vpn, real_pte_t pte, int psize, + int ssize, unsigned long flags); +extern void flush_hash_range(unsigned long number, int local); +extern void flush_hash_hugepage(unsigned long vsid, unsigned long addr, + pmd_t *pmdp, unsigned int psize, int ssize, + unsigned long flags); +static inline void hash__local_flush_tlb_mm(struct mm_struct *mm) +{ +} + +static inline void hash__flush_tlb_mm(struct mm_struct *mm) +{ +} + +static inline void hash__local_flush_all_mm(struct mm_struct *mm) +{ + /* + * There's no Page Walk Cache for hash, so what is needed is + * the same as flush_tlb_mm(), which doesn't really make sense + * with hash. So the only thing we could do is flush the + * entire LPID! Punt for now, as it's not being used. + */ + WARN_ON_ONCE(1); +} + +static inline void hash__flush_all_mm(struct mm_struct *mm) +{ + /* + * There's no Page Walk Cache for hash, so what is needed is + * the same as flush_tlb_mm(), which doesn't really make sense + * with hash. So the only thing we could do is flush the + * entire LPID! Punt for now, as it's not being used. + */ + WARN_ON_ONCE(1); +} + +static inline void hash__local_flush_tlb_page(struct vm_area_struct *vma, + unsigned long vmaddr) +{ +} + +static inline void hash__flush_tlb_page(struct vm_area_struct *vma, + unsigned long vmaddr) +{ +} + +static inline void hash__flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ +} + +static inline void hash__flush_tlb_kernel_range(unsigned long start, + unsigned long end) +{ +} + + +struct mmu_gather; +extern void hash__tlb_flush(struct mmu_gather *tlb); +/* Private function for use by PCI IO mapping code */ +extern void __flush_hash_table_range(unsigned long start, unsigned long end); +extern void flush_tlb_pmd_range(struct mm_struct *mm, pmd_t *pmd, + unsigned long addr); +#endif /* _ASM_POWERPC_BOOK3S_64_TLBFLUSH_HASH_H */ diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h new file mode 100644 index 000000000..94439e0ce --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/tlbflush-radix.h @@ -0,0 +1,91 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_TLBFLUSH_RADIX_H +#define _ASM_POWERPC_TLBFLUSH_RADIX_H + +#include <asm/hvcall.h> + +struct vm_area_struct; +struct mm_struct; +struct mmu_gather; + +static inline u64 psize_to_rpti_pgsize(unsigned long psize) +{ + if (psize == MMU_PAGE_4K) + return H_RPTI_PAGE_4K; + if (psize == MMU_PAGE_64K) + return H_RPTI_PAGE_64K; + if (psize == MMU_PAGE_2M) + return H_RPTI_PAGE_2M; + if (psize == MMU_PAGE_1G) + return H_RPTI_PAGE_1G; + return H_RPTI_PAGE_ALL; +} + +static inline int mmu_get_ap(int psize) +{ + return mmu_psize_defs[psize].ap; +} + +#ifdef CONFIG_PPC_RADIX_MMU +extern void radix__tlbiel_all(unsigned int action); +extern void radix__flush_tlb_lpid_page(unsigned int lpid, + unsigned long addr, + unsigned long page_size); +extern void radix__flush_pwc_lpid(unsigned int lpid); +extern void radix__flush_all_lpid(unsigned int lpid); +extern void radix__flush_all_lpid_guest(unsigned int lpid); +#else +static inline void radix__tlbiel_all(unsigned int action) { WARN_ON(1); }; +static inline void radix__flush_tlb_lpid_page(unsigned int lpid, + unsigned long addr, + unsigned long page_size) +{ + WARN_ON(1); +} +static inline void radix__flush_pwc_lpid(unsigned int lpid) +{ + WARN_ON(1); +} +static inline void radix__flush_all_lpid(unsigned int lpid) +{ + WARN_ON(1); +} +static inline void radix__flush_all_lpid_guest(unsigned int lpid) +{ + WARN_ON(1); +} +#endif + +extern void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end); +extern void radix__flush_tlb_range_psize(struct mm_struct *mm, unsigned long start, + unsigned long end, int psize); +extern void radix__flush_pmd_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end); +extern void radix__flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +extern void radix__flush_tlb_kernel_range(unsigned long start, unsigned long end); + +extern void radix__local_flush_tlb_mm(struct mm_struct *mm); +extern void radix__local_flush_all_mm(struct mm_struct *mm); +extern void radix__local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); +extern void radix__local_flush_tlb_page_psize(struct mm_struct *mm, unsigned long vmaddr, + int psize); +extern void radix__tlb_flush(struct mmu_gather *tlb); +#ifdef CONFIG_SMP +extern void radix__flush_tlb_mm(struct mm_struct *mm); +extern void radix__flush_all_mm(struct mm_struct *mm); +extern void radix__flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); +extern void radix__flush_tlb_page_psize(struct mm_struct *mm, unsigned long vmaddr, + int psize); +#else +#define radix__flush_tlb_mm(mm) radix__local_flush_tlb_mm(mm) +#define radix__flush_all_mm(mm) radix__local_flush_all_mm(mm) +#define radix__flush_tlb_page(vma,addr) radix__local_flush_tlb_page(vma,addr) +#define radix__flush_tlb_page_psize(mm,addr,p) radix__local_flush_tlb_page_psize(mm,addr,p) +#endif +extern void radix__flush_tlb_pwc(struct mmu_gather *tlb, unsigned long addr); +extern void radix__flush_tlb_collapsed_pmd(struct mm_struct *mm, unsigned long addr); +extern void radix__flush_tlb_all(void); + +#endif diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush.h b/arch/powerpc/include/asm/book3s/64/tlbflush.h new file mode 100644 index 000000000..dcb5c3839 --- /dev/null +++ b/arch/powerpc/include/asm/book3s/64/tlbflush.h @@ -0,0 +1,158 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_64_TLBFLUSH_H +#define _ASM_POWERPC_BOOK3S_64_TLBFLUSH_H + +#define MMU_NO_CONTEXT ~0UL + +#include <linux/mm_types.h> +#include <asm/book3s/64/tlbflush-hash.h> +#include <asm/book3s/64/tlbflush-radix.h> + +/* TLB flush actions. Used as argument to tlbiel_all() */ +enum { + TLB_INVAL_SCOPE_GLOBAL = 0, /* invalidate all TLBs */ + TLB_INVAL_SCOPE_LPID = 1, /* invalidate TLBs for current LPID */ +}; + +#ifdef CONFIG_PPC_NATIVE +static inline void tlbiel_all(void) +{ + /* + * This is used for host machine check and bootup. + * + * This uses early_radix_enabled and implementations use + * early_cpu_has_feature etc because that works early in boot + * and this is the machine check path which is not performance + * critical. + */ + if (early_radix_enabled()) + radix__tlbiel_all(TLB_INVAL_SCOPE_GLOBAL); + else + hash__tlbiel_all(TLB_INVAL_SCOPE_GLOBAL); +} +#else +static inline void tlbiel_all(void) { BUG(); }; +#endif + +static inline void tlbiel_all_lpid(bool radix) +{ + /* + * This is used for guest machine check. + */ + if (radix) + radix__tlbiel_all(TLB_INVAL_SCOPE_LPID); + else + hash__tlbiel_all(TLB_INVAL_SCOPE_LPID); +} + + +#define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE +static inline void flush_pmd_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + if (radix_enabled()) + return radix__flush_pmd_tlb_range(vma, start, end); + return hash__flush_tlb_range(vma, start, end); +} + +#define __HAVE_ARCH_FLUSH_HUGETLB_TLB_RANGE +static inline void flush_hugetlb_tlb_range(struct vm_area_struct *vma, + unsigned long start, + unsigned long end) +{ + if (radix_enabled()) + return radix__flush_hugetlb_tlb_range(vma, start, end); + return hash__flush_tlb_range(vma, start, end); +} + +static inline void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + if (radix_enabled()) + return radix__flush_tlb_range(vma, start, end); + return hash__flush_tlb_range(vma, start, end); +} + +static inline void flush_tlb_kernel_range(unsigned long start, + unsigned long end) +{ + if (radix_enabled()) + return radix__flush_tlb_kernel_range(start, end); + return hash__flush_tlb_kernel_range(start, end); +} + +static inline void local_flush_tlb_mm(struct mm_struct *mm) +{ + if (radix_enabled()) + return radix__local_flush_tlb_mm(mm); + return hash__local_flush_tlb_mm(mm); +} + +static inline void local_flush_tlb_page(struct vm_area_struct *vma, + unsigned long vmaddr) +{ + if (radix_enabled()) + return radix__local_flush_tlb_page(vma, vmaddr); + return hash__local_flush_tlb_page(vma, vmaddr); +} + +static inline void local_flush_all_mm(struct mm_struct *mm) +{ + if (radix_enabled()) + return radix__local_flush_all_mm(mm); + return hash__local_flush_all_mm(mm); +} + +static inline void tlb_flush(struct mmu_gather *tlb) +{ + if (radix_enabled()) + return radix__tlb_flush(tlb); + return hash__tlb_flush(tlb); +} + +#ifdef CONFIG_SMP +static inline void flush_tlb_mm(struct mm_struct *mm) +{ + if (radix_enabled()) + return radix__flush_tlb_mm(mm); + return hash__flush_tlb_mm(mm); +} + +static inline void flush_tlb_page(struct vm_area_struct *vma, + unsigned long vmaddr) +{ + if (radix_enabled()) + return radix__flush_tlb_page(vma, vmaddr); + return hash__flush_tlb_page(vma, vmaddr); +} + +static inline void flush_all_mm(struct mm_struct *mm) +{ + if (radix_enabled()) + return radix__flush_all_mm(mm); + return hash__flush_all_mm(mm); +} +#else +#define flush_tlb_mm(mm) local_flush_tlb_mm(mm) +#define flush_tlb_page(vma, addr) local_flush_tlb_page(vma, addr) +#define flush_all_mm(mm) local_flush_all_mm(mm) +#endif /* CONFIG_SMP */ + +#define flush_tlb_fix_spurious_fault flush_tlb_fix_spurious_fault +static inline void flush_tlb_fix_spurious_fault(struct vm_area_struct *vma, + unsigned long address) +{ + /* See ptep_set_access_flags comment */ + if (atomic_read(&vma->vm_mm->context.copros) > 0) + flush_tlb_page(vma, address); +} + +extern bool tlbie_capable; +extern bool tlbie_enabled; + +static inline bool cputlb_use_tlbie(void) +{ + return tlbie_enabled; +} + +#endif /* _ASM_POWERPC_BOOK3S_64_TLBFLUSH_H */ diff --git a/arch/powerpc/include/asm/book3s/pgalloc.h b/arch/powerpc/include/asm/book3s/pgalloc.h new file mode 100644 index 000000000..6b178ca14 --- /dev/null +++ b/arch/powerpc/include/asm/book3s/pgalloc.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_PGALLOC_H +#define _ASM_POWERPC_BOOK3S_PGALLOC_H + +#include <linux/mm.h> + +extern void tlb_remove_table(struct mmu_gather *tlb, void *table); + +#ifdef CONFIG_PPC64 +#include <asm/book3s/64/pgalloc.h> +#else +#include <asm/book3s/32/pgalloc.h> +#endif + +#endif /* _ASM_POWERPC_BOOK3S_PGALLOC_H */ diff --git a/arch/powerpc/include/asm/book3s/pgtable.h b/arch/powerpc/include/asm/book3s/pgtable.h new file mode 100644 index 000000000..0e1263455 --- /dev/null +++ b/arch/powerpc/include/asm/book3s/pgtable.h @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_PGTABLE_H +#define _ASM_POWERPC_BOOK3S_PGTABLE_H + +#ifdef CONFIG_PPC64 +#include <asm/book3s/64/pgtable.h> +#else +#include <asm/book3s/32/pgtable.h> +#endif + +#define FIRST_USER_ADDRESS 0UL +#ifndef __ASSEMBLY__ +/* Insert a PTE, top-level function is out of line. It uses an inline + * low level function in the respective pgtable-* files + */ +extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, + pte_t pte); + + +#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS +extern int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address, + pte_t *ptep, pte_t entry, int dirty); + +struct file; +extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t vma_prot); +#define __HAVE_PHYS_MEM_ACCESS_PROT + +/* + * This gets called at the end of handling a page fault, when + * the kernel has put a new PTE into the page table for the process. + * We use it to ensure coherency between the i-cache and d-cache + * for the page which has just been mapped in. + * On machines which use an MMU hash table, we use this to put a + * corresponding HPTE into the hash table ahead of time, instead of + * waiting for the inevitable extra hash-table miss exception. + */ +void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep); + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/powerpc/include/asm/book3s/tlbflush.h b/arch/powerpc/include/asm/book3s/tlbflush.h new file mode 100644 index 000000000..dec11de41 --- /dev/null +++ b/arch/powerpc/include/asm/book3s/tlbflush.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BOOK3S_TLBFLUSH_H +#define _ASM_POWERPC_BOOK3S_TLBFLUSH_H + +#ifdef CONFIG_PPC64 +#include <asm/book3s/64/tlbflush.h> +#else +#include <asm/book3s/32/tlbflush.h> +#endif + +#endif /* _ASM_POWERPC_BOOK3S_TLBFLUSH_H */ diff --git a/arch/powerpc/include/asm/bootx.h b/arch/powerpc/include/asm/bootx.h new file mode 100644 index 000000000..1c121f3c5 --- /dev/null +++ b/arch/powerpc/include/asm/bootx.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This file describes the structure passed from the BootX application + * (for MacOS) when it is used to boot Linux. + * + * Written by Benjamin Herrenschmidt. + */ + +#ifndef __ASM_BOOTX_H__ +#define __ASM_BOOTX_H__ + +#include <uapi/asm/bootx.h> + +/* (*) The format of the colormap is 256 * 3 * 2 bytes. Each color index + * is represented by 3 short words containing a 16 bits (unsigned) color + * component. Later versions may contain the gamma table for direct-color + * devices here. + */ +#define BOOTX_COLORTABLE_SIZE (256UL*3UL*2UL) + +/* BootX passes the device-tree using a format that comes from earlier + * ppc32 kernels. This used to match what is in prom.h, but not anymore + * so we now define it here + */ +struct bootx_dt_prop { + u32 name; + int length; + u32 value; + u32 next; +}; + +struct bootx_dt_node { + u32 unused0; + u32 unused1; + u32 phandle; /* not really available */ + u32 unused2; + u32 unused3; + u32 unused4; + u32 unused5; + u32 full_name; + u32 properties; + u32 parent; + u32 child; + u32 sibling; + u32 next; + u32 allnext; +}; + +extern void bootx_init(unsigned long r4, unsigned long phys); + +#endif diff --git a/arch/powerpc/include/asm/bpf_perf_event.h b/arch/powerpc/include/asm/bpf_perf_event.h new file mode 100644 index 000000000..e8a7b4ffb --- /dev/null +++ b/arch/powerpc/include/asm/bpf_perf_event.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BPF_PERF_EVENT_H +#define _ASM_POWERPC_BPF_PERF_EVENT_H + +#include <asm/ptrace.h> + +typedef struct user_pt_regs bpf_user_pt_regs_t; + +#endif /* _ASM_POWERPC_BPF_PERF_EVENT_H */ diff --git a/arch/powerpc/include/asm/btext.h b/arch/powerpc/include/asm/btext.h new file mode 100644 index 000000000..461b0f193 --- /dev/null +++ b/arch/powerpc/include/asm/btext.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Definitions for using the procedures in btext.c. + * + * Benjamin Herrenschmidt <benh@kernel.crashing.org> + */ +#ifndef __PPC_BTEXT_H +#define __PPC_BTEXT_H +#ifdef __KERNEL__ + +extern int btext_find_display(int allow_nonstdout); +extern void btext_update_display(unsigned long phys, int width, int height, + int depth, int pitch); +extern void btext_setup_display(int width, int height, int depth, int pitch, + unsigned long address); +#ifdef CONFIG_PPC32 +extern void btext_prepare_BAT(void); +#else +static inline void btext_prepare_BAT(void) { } +#endif +extern void btext_map(void); +extern void btext_unmap(void); + +extern void btext_drawchar(char c); +extern void btext_drawstring(const char *str); +extern void btext_drawhex(unsigned long v); +extern void btext_drawtext(const char *c, unsigned int len); + +extern void btext_clearscreen(void); +extern void btext_flushscreen(void); +extern void btext_flushline(void); + +#endif /* __KERNEL__ */ +#endif /* __PPC_BTEXT_H */ diff --git a/arch/powerpc/include/asm/bug.h b/arch/powerpc/include/asm/bug.h new file mode 100644 index 000000000..338f36cd9 --- /dev/null +++ b/arch/powerpc/include/asm/bug.h @@ -0,0 +1,125 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_BUG_H +#define _ASM_POWERPC_BUG_H +#ifdef __KERNEL__ + +#include <asm/asm-compat.h> + +#ifdef CONFIG_BUG + +#ifdef __ASSEMBLY__ +#include <asm/asm-offsets.h> +#ifdef CONFIG_DEBUG_BUGVERBOSE +.macro EMIT_BUG_ENTRY addr,file,line,flags + .section __bug_table,"aw" +5001: PPC_LONG \addr, 5002f + .short \line, \flags + .org 5001b+BUG_ENTRY_SIZE + .previous + .section .rodata,"a" +5002: .asciz "\file" + .previous +.endm +#else +.macro EMIT_BUG_ENTRY addr,file,line,flags + .section __bug_table,"aw" +5001: PPC_LONG \addr + .short \flags + .org 5001b+BUG_ENTRY_SIZE + .previous +.endm +#endif /* verbose */ + +#else /* !__ASSEMBLY__ */ +/* _EMIT_BUG_ENTRY expects args %0,%1,%2,%3 to be FILE, LINE, flags and + sizeof(struct bug_entry), respectively */ +#ifdef CONFIG_DEBUG_BUGVERBOSE +#define _EMIT_BUG_ENTRY \ + ".section __bug_table,\"aw\"\n" \ + "2:\t" PPC_LONG "1b, %0\n" \ + "\t.short %1, %2\n" \ + ".org 2b+%3\n" \ + ".previous\n" +#else +#define _EMIT_BUG_ENTRY \ + ".section __bug_table,\"aw\"\n" \ + "2:\t" PPC_LONG "1b\n" \ + "\t.short %2\n" \ + ".org 2b+%3\n" \ + ".previous\n" +#endif + +#define BUG_ENTRY(insn, flags, ...) \ + __asm__ __volatile__( \ + "1: " insn "\n" \ + _EMIT_BUG_ENTRY \ + : : "i" (__FILE__), "i" (__LINE__), \ + "i" (flags), \ + "i" (sizeof(struct bug_entry)), \ + ##__VA_ARGS__) + +/* + * BUG_ON() and WARN_ON() do their best to cooperate with compile-time + * optimisations. However depending on the complexity of the condition + * some compiler versions may not produce optimal results. + */ + +#define BUG() do { \ + BUG_ENTRY("twi 31, 0, 0", 0); \ + unreachable(); \ +} while (0) + +#define BUG_ON(x) do { \ + if (__builtin_constant_p(x)) { \ + if (x) \ + BUG(); \ + } else { \ + BUG_ENTRY(PPC_TLNEI " %4, 0", 0, "r" ((__force long)(x))); \ + } \ +} while (0) + +#define __WARN_FLAGS(flags) BUG_ENTRY("twi 31, 0, 0", BUGFLAG_WARNING | (flags)) + +#define WARN_ON(x) ({ \ + int __ret_warn_on = !!(x); \ + if (__builtin_constant_p(__ret_warn_on)) { \ + if (__ret_warn_on) \ + __WARN(); \ + } else { \ + BUG_ENTRY(PPC_TLNEI " %4, 0", \ + BUGFLAG_WARNING | BUGFLAG_TAINT(TAINT_WARN), \ + "r" (__ret_warn_on)); \ + } \ + unlikely(__ret_warn_on); \ +}) + +#define HAVE_ARCH_BUG +#define HAVE_ARCH_BUG_ON +#define HAVE_ARCH_WARN_ON +#endif /* __ASSEMBLY __ */ +#else +#ifdef __ASSEMBLY__ +.macro EMIT_BUG_ENTRY addr,file,line,flags +.endm +#else /* !__ASSEMBLY__ */ +#define _EMIT_BUG_ENTRY +#endif +#endif /* CONFIG_BUG */ + +#include <asm-generic/bug.h> + +#ifndef __ASSEMBLY__ + +struct pt_regs; +extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long); +extern void bad_page_fault(struct pt_regs *, unsigned long, int); +extern void _exception(int, struct pt_regs *, int, unsigned long); +extern void _exception_pkey(struct pt_regs *, unsigned long, int); +extern void die(const char *, struct pt_regs *, long); +extern bool die_will_crash(void); +extern void panic_flush_kmsg_start(void); +extern void panic_flush_kmsg_end(void); +#endif /* !__ASSEMBLY__ */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_BUG_H */ diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h new file mode 100644 index 000000000..ae0a68a83 --- /dev/null +++ b/arch/powerpc/include/asm/cache.h @@ -0,0 +1,146 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_CACHE_H +#define _ASM_POWERPC_CACHE_H + +#ifdef __KERNEL__ + + +/* bytes per L1 cache line */ +#if defined(CONFIG_PPC_8xx) +#define L1_CACHE_SHIFT 4 +#define MAX_COPY_PREFETCH 1 +#define IFETCH_ALIGN_SHIFT 2 +#elif defined(CONFIG_PPC_E500MC) +#define L1_CACHE_SHIFT 6 +#define MAX_COPY_PREFETCH 4 +#define IFETCH_ALIGN_SHIFT 3 +#elif defined(CONFIG_PPC32) +#define MAX_COPY_PREFETCH 4 +#define IFETCH_ALIGN_SHIFT 3 /* 603 fetches 2 insn at a time */ +#if defined(CONFIG_PPC_47x) +#define L1_CACHE_SHIFT 7 +#else +#define L1_CACHE_SHIFT 5 +#endif +#else /* CONFIG_PPC64 */ +#define L1_CACHE_SHIFT 7 +#define IFETCH_ALIGN_SHIFT 4 /* POWER8,9 */ +#endif + +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#define SMP_CACHE_BYTES L1_CACHE_BYTES + +#define IFETCH_ALIGN_BYTES (1 << IFETCH_ALIGN_SHIFT) + +#if !defined(__ASSEMBLY__) +#ifdef CONFIG_PPC64 + +struct ppc_cache_info { + u32 size; + u32 line_size; + u32 block_size; /* L1 only */ + u32 log_block_size; + u32 blocks_per_page; + u32 sets; + u32 assoc; +}; + +struct ppc64_caches { + struct ppc_cache_info l1d; + struct ppc_cache_info l1i; + struct ppc_cache_info l2; + struct ppc_cache_info l3; +}; + +extern struct ppc64_caches ppc64_caches; + +static inline u32 l1_dcache_shift(void) +{ + return ppc64_caches.l1d.log_block_size; +} + +static inline u32 l1_dcache_bytes(void) +{ + return ppc64_caches.l1d.block_size; +} + +static inline u32 l1_icache_shift(void) +{ + return ppc64_caches.l1i.log_block_size; +} + +static inline u32 l1_icache_bytes(void) +{ + return ppc64_caches.l1i.block_size; +} +#else +static inline u32 l1_dcache_shift(void) +{ + return L1_CACHE_SHIFT; +} + +static inline u32 l1_dcache_bytes(void) +{ + return L1_CACHE_BYTES; +} + +static inline u32 l1_icache_shift(void) +{ + return L1_CACHE_SHIFT; +} + +static inline u32 l1_icache_bytes(void) +{ + return L1_CACHE_BYTES; +} + +#endif + +#define __read_mostly __section(".data..read_mostly") + +#ifdef CONFIG_PPC_BOOK3S_32 +extern long _get_L2CR(void); +extern long _get_L3CR(void); +extern void _set_L2CR(unsigned long); +extern void _set_L3CR(unsigned long); +#else +#define _get_L2CR() 0L +#define _get_L3CR() 0L +#define _set_L2CR(val) do { } while(0) +#define _set_L3CR(val) do { } while(0) +#endif + +static inline void dcbz(void *addr) +{ + __asm__ __volatile__ ("dcbz 0, %0" : : "r"(addr) : "memory"); +} + +static inline void dcbi(void *addr) +{ + __asm__ __volatile__ ("dcbi 0, %0" : : "r"(addr) : "memory"); +} + +static inline void dcbf(void *addr) +{ + __asm__ __volatile__ ("dcbf 0, %0" : : "r"(addr) : "memory"); +} + +static inline void dcbst(void *addr) +{ + __asm__ __volatile__ ("dcbst 0, %0" : : "r"(addr) : "memory"); +} + +static inline void icbi(void *addr) +{ + asm volatile ("icbi 0, %0" : : "r"(addr) : "memory"); +} + +static inline void iccci(void *addr) +{ + asm volatile ("iccci 0, %0" : : "r"(addr) : "memory"); +} + +#endif /* !__ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_CACHE_H */ diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h new file mode 100644 index 000000000..138e46d8c --- /dev/null +++ b/arch/powerpc/include/asm/cacheflush.h @@ -0,0 +1,113 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + */ +#ifndef _ASM_POWERPC_CACHEFLUSH_H +#define _ASM_POWERPC_CACHEFLUSH_H + +#include <linux/mm.h> +#include <asm/cputable.h> +#include <asm/cpu_has_feature.h> + +#ifdef CONFIG_PPC_BOOK3S_64 +/* + * Book3s has no ptesync after setting a pte, so without this ptesync it's + * possible for a kernel virtual mapping access to return a spurious fault + * if it's accessed right after the pte is set. The page fault handler does + * not expect this type of fault. flush_cache_vmap is not exactly the right + * place to put this, but it seems to work well enough. + */ +static inline void flush_cache_vmap(unsigned long start, unsigned long end) +{ + asm volatile("ptesync" ::: "memory"); +} +#define flush_cache_vmap flush_cache_vmap +#endif /* CONFIG_PPC_BOOK3S_64 */ + +#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1 +extern void flush_dcache_page(struct page *page); + +void flush_icache_range(unsigned long start, unsigned long stop); +#define flush_icache_range flush_icache_range + +void flush_icache_user_page(struct vm_area_struct *vma, struct page *page, + unsigned long addr, int len); +#define flush_icache_user_page flush_icache_user_page + +void flush_dcache_icache_page(struct page *page); +void __flush_dcache_icache(void *page); + +/** + * flush_dcache_range(): Write any modified data cache blocks out to memory and + * invalidate them. Does not invalidate the corresponding instruction cache + * blocks. + * + * @start: the start address + * @stop: the stop address (exclusive) + */ +static inline void flush_dcache_range(unsigned long start, unsigned long stop) +{ + unsigned long shift = l1_dcache_shift(); + unsigned long bytes = l1_dcache_bytes(); + void *addr = (void *)(start & ~(bytes - 1)); + unsigned long size = stop - (unsigned long)addr + (bytes - 1); + unsigned long i; + + if (IS_ENABLED(CONFIG_PPC64)) + mb(); /* sync */ + + for (i = 0; i < size >> shift; i++, addr += bytes) + dcbf(addr); + mb(); /* sync */ + +} + +/* + * Write any modified data cache blocks out to memory. + * Does not invalidate the corresponding cache lines (especially for + * any corresponding instruction cache). + */ +static inline void clean_dcache_range(unsigned long start, unsigned long stop) +{ + unsigned long shift = l1_dcache_shift(); + unsigned long bytes = l1_dcache_bytes(); + void *addr = (void *)(start & ~(bytes - 1)); + unsigned long size = stop - (unsigned long)addr + (bytes - 1); + unsigned long i; + + for (i = 0; i < size >> shift; i++, addr += bytes) + dcbst(addr); + mb(); /* sync */ +} + +/* + * Like above, but invalidate the D-cache. This is used by the 8xx + * to invalidate the cache so the PPC core doesn't get stale data + * from the CPM (no cache snooping here :-). + */ +static inline void invalidate_dcache_range(unsigned long start, + unsigned long stop) +{ + unsigned long shift = l1_dcache_shift(); + unsigned long bytes = l1_dcache_bytes(); + void *addr = (void *)(start & ~(bytes - 1)); + unsigned long size = stop - (unsigned long)addr + (bytes - 1); + unsigned long i; + + for (i = 0; i < size >> shift; i++, addr += bytes) + dcbi(addr); + mb(); /* sync */ +} + +#ifdef CONFIG_4xx +static inline void flush_instruction_cache(void) +{ + iccci((void *)KERNELBASE); + isync(); +} +#else +void flush_instruction_cache(void); +#endif + +#include <asm-generic/cacheflush.h> + +#endif /* _ASM_POWERPC_CACHEFLUSH_H */ diff --git a/arch/powerpc/include/asm/cell-pmu.h b/arch/powerpc/include/asm/cell-pmu.h new file mode 100644 index 000000000..6a79b5d1c --- /dev/null +++ b/arch/powerpc/include/asm/cell-pmu.h @@ -0,0 +1,94 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Cell Broadband Engine Performance Monitor + * + * (C) Copyright IBM Corporation 2006 + * + * Author: + * David Erb (djerb@us.ibm.com) + * Kevin Corry (kevcorry@us.ibm.com) + */ + +#ifndef __ASM_CELL_PMU_H__ +#define __ASM_CELL_PMU_H__ + +/* The Cell PMU has four hardware performance counters, which can be + * configured as four 32-bit counters or eight 16-bit counters. + */ +#define NR_PHYS_CTRS 4 +#define NR_CTRS (NR_PHYS_CTRS * 2) + +/* Macros for the pm_control register. */ +#define CBE_PM_16BIT_CTR(ctr) (1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1)))) +#define CBE_PM_ENABLE_PERF_MON 0x80000000 +#define CBE_PM_STOP_AT_MAX 0x40000000 +#define CBE_PM_TRACE_MODE_GET(pm_control) (((pm_control) >> 28) & 0x3) +#define CBE_PM_TRACE_MODE_SET(mode) (((mode) & 0x3) << 28) +#define CBE_PM_TRACE_BUF_OVFLW(bit) (((bit) & 0x1) << 17) +#define CBE_PM_COUNT_MODE_SET(count) (((count) & 0x3) << 18) +#define CBE_PM_FREEZE_ALL_CTRS 0x00100000 +#define CBE_PM_ENABLE_EXT_TRACE 0x00008000 +#define CBE_PM_SPU_ADDR_TRACE_SET(msk) (((msk) & 0x3) << 9) + +/* Macros for the trace_address register. */ +#define CBE_PM_TRACE_BUF_FULL 0x00000800 +#define CBE_PM_TRACE_BUF_EMPTY 0x00000400 +#define CBE_PM_TRACE_BUF_DATA_COUNT(ta) ((ta) & 0x3ff) +#define CBE_PM_TRACE_BUF_MAX_COUNT 0x400 + +/* Macros for the pm07_control registers. */ +#define CBE_PM_CTR_INPUT_MUX(pm07_control) (((pm07_control) >> 26) & 0x3f) +#define CBE_PM_CTR_INPUT_CONTROL 0x02000000 +#define CBE_PM_CTR_POLARITY 0x01000000 +#define CBE_PM_CTR_COUNT_CYCLES 0x00800000 +#define CBE_PM_CTR_ENABLE 0x00400000 +#define PM07_CTR_INPUT_MUX(x) (((x) & 0x3F) << 26) +#define PM07_CTR_INPUT_CONTROL(x) (((x) & 1) << 25) +#define PM07_CTR_POLARITY(x) (((x) & 1) << 24) +#define PM07_CTR_COUNT_CYCLES(x) (((x) & 1) << 23) +#define PM07_CTR_ENABLE(x) (((x) & 1) << 22) + +/* Macros for the pm_status register. */ +#define CBE_PM_CTR_OVERFLOW_INTR(ctr) (1 << (31 - ((ctr) & 7))) + +enum pm_reg_name { + group_control, + debug_bus_control, + trace_address, + ext_tr_timer, + pm_status, + pm_control, + pm_interval, + pm_start_stop, +}; + +/* Routines for reading/writing the PMU registers. */ +extern u32 cbe_read_phys_ctr(u32 cpu, u32 phys_ctr); +extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val); +extern u32 cbe_read_ctr(u32 cpu, u32 ctr); +extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val); + +extern u32 cbe_read_pm07_control(u32 cpu, u32 ctr); +extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val); +extern u32 cbe_read_pm(u32 cpu, enum pm_reg_name reg); +extern void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val); + +extern u32 cbe_get_ctr_size(u32 cpu, u32 phys_ctr); +extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size); + +extern void cbe_enable_pm(u32 cpu); +extern void cbe_disable_pm(u32 cpu); + +extern void cbe_read_trace_buffer(u32 cpu, u64 *buf); + +extern void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask); +extern void cbe_disable_pm_interrupts(u32 cpu); +extern u32 cbe_get_and_clear_pm_interrupts(u32 cpu); +extern void cbe_sync_irq(int node); + +#define CBE_COUNT_SUPERVISOR_MODE 0 +#define CBE_COUNT_HYPERVISOR_MODE 1 +#define CBE_COUNT_PROBLEM_MODE 2 +#define CBE_COUNT_ALL_MODES 3 + +#endif /* __ASM_CELL_PMU_H__ */ diff --git a/arch/powerpc/include/asm/cell-regs.h b/arch/powerpc/include/asm/cell-regs.h new file mode 100644 index 000000000..e1c431ef3 --- /dev/null +++ b/arch/powerpc/include/asm/cell-regs.h @@ -0,0 +1,327 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * cbe_regs.h + * + * This file is intended to hold the various register definitions for CBE + * on-chip system devices (memory controller, IO controller, etc...) + * + * (C) Copyright IBM Corporation 2001,2006 + * + * Authors: Maximino Aguilar (maguilar@us.ibm.com) + * David J. Erb (djerb@us.ibm.com) + * + * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp. + */ + +#ifndef CBE_REGS_H +#define CBE_REGS_H + +#include <asm/cell-pmu.h> + +/* + * + * Some HID register definitions + * + */ + +/* CBE specific HID0 bits */ +#define HID0_CBE_THERM_WAKEUP 0x0000020000000000ul +#define HID0_CBE_SYSERR_WAKEUP 0x0000008000000000ul +#define HID0_CBE_THERM_INT_EN 0x0000000400000000ul +#define HID0_CBE_SYSERR_INT_EN 0x0000000200000000ul + +#define MAX_CBE 2 + +/* + * + * Pervasive unit register definitions + * + */ + +union spe_reg { + u64 val; + u8 spe[8]; +}; + +union ppe_spe_reg { + u64 val; + struct { + u32 ppe; + u32 spe; + }; +}; + + +struct cbe_pmd_regs { + /* Debug Bus Control */ + u64 pad_0x0000; /* 0x0000 */ + + u64 group_control; /* 0x0008 */ + + u8 pad_0x0010_0x00a8 [0x00a8 - 0x0010]; /* 0x0010 */ + + u64 debug_bus_control; /* 0x00a8 */ + + u8 pad_0x00b0_0x0100 [0x0100 - 0x00b0]; /* 0x00b0 */ + + u64 trace_aux_data; /* 0x0100 */ + u64 trace_buffer_0_63; /* 0x0108 */ + u64 trace_buffer_64_127; /* 0x0110 */ + u64 trace_address; /* 0x0118 */ + u64 ext_tr_timer; /* 0x0120 */ + + u8 pad_0x0128_0x0400 [0x0400 - 0x0128]; /* 0x0128 */ + + /* Performance Monitor */ + u64 pm_status; /* 0x0400 */ + u64 pm_control; /* 0x0408 */ + u64 pm_interval; /* 0x0410 */ + u64 pm_ctr[4]; /* 0x0418 */ + u64 pm_start_stop; /* 0x0438 */ + u64 pm07_control[8]; /* 0x0440 */ + + u8 pad_0x0480_0x0800 [0x0800 - 0x0480]; /* 0x0480 */ + + /* Thermal Sensor Registers */ + union spe_reg ts_ctsr1; /* 0x0800 */ + u64 ts_ctsr2; /* 0x0808 */ + union spe_reg ts_mtsr1; /* 0x0810 */ + u64 ts_mtsr2; /* 0x0818 */ + union spe_reg ts_itr1; /* 0x0820 */ + u64 ts_itr2; /* 0x0828 */ + u64 ts_gitr; /* 0x0830 */ + u64 ts_isr; /* 0x0838 */ + u64 ts_imr; /* 0x0840 */ + union spe_reg tm_cr1; /* 0x0848 */ + u64 tm_cr2; /* 0x0850 */ + u64 tm_simr; /* 0x0858 */ + union ppe_spe_reg tm_tpr; /* 0x0860 */ + union spe_reg tm_str1; /* 0x0868 */ + u64 tm_str2; /* 0x0870 */ + union ppe_spe_reg tm_tsr; /* 0x0878 */ + + /* Power Management */ + u64 pmcr; /* 0x0880 */ +#define CBE_PMD_PAUSE_ZERO_CONTROL 0x10000 + u64 pmsr; /* 0x0888 */ + + /* Time Base Register */ + u64 tbr; /* 0x0890 */ + + u8 pad_0x0898_0x0c00 [0x0c00 - 0x0898]; /* 0x0898 */ + + /* Fault Isolation Registers */ + u64 checkstop_fir; /* 0x0c00 */ + u64 recoverable_fir; /* 0x0c08 */ + u64 spec_att_mchk_fir; /* 0x0c10 */ + u32 fir_mode_reg; /* 0x0c18 */ + u8 pad_0x0c1c_0x0c20 [4]; /* 0x0c1c */ +#define CBE_PMD_FIR_MODE_M8 0x00800 + u64 fir_enable_mask; /* 0x0c20 */ + + u8 pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28]; /* 0x0c28 */ + u64 ras_esc_0; /* 0x0ca8 */ + u8 pad_0x0cb0_0x1000 [0x1000 - 0x0cb0]; /* 0x0cb0 */ +}; + +extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np); +extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu); + +/* + * PMU shadow registers + * + * Many of the registers in the performance monitoring unit are write-only, + * so we need to save a copy of what we write to those registers. + * + * The actual data counters are read/write. However, writing to the counters + * only takes effect if the PMU is enabled. Otherwise the value is stored in + * a hardware latch until the next time the PMU is enabled. So we save a copy + * of the counter values if we need to read them back while the PMU is + * disabled. The counter_value_in_latch field is a bitmap indicating which + * counters currently have a value waiting to be written. + */ + +struct cbe_pmd_shadow_regs { + u32 group_control; + u32 debug_bus_control; + u32 trace_address; + u32 ext_tr_timer; + u32 pm_status; + u32 pm_control; + u32 pm_interval; + u32 pm_start_stop; + u32 pm07_control[NR_CTRS]; + + u32 pm_ctr[NR_PHYS_CTRS]; + u32 counter_value_in_latch; +}; + +extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np); +extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu); + +/* + * + * IIC unit register definitions + * + */ + +struct cbe_iic_pending_bits { + u32 data; + u8 flags; + u8 class; + u8 source; + u8 prio; +}; + +#define CBE_IIC_IRQ_VALID 0x80 +#define CBE_IIC_IRQ_IPI 0x40 + +struct cbe_iic_thread_regs { + struct cbe_iic_pending_bits pending; + struct cbe_iic_pending_bits pending_destr; + u64 generate; + u64 prio; +}; + +struct cbe_iic_regs { + u8 pad_0x0000_0x0400[0x0400 - 0x0000]; /* 0x0000 */ + + /* IIC interrupt registers */ + struct cbe_iic_thread_regs thread[2]; /* 0x0400 */ + + u64 iic_ir; /* 0x0440 */ +#define CBE_IIC_IR_PRIO(x) (((x) & 0xf) << 12) +#define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4) +#define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf) +#define CBE_IIC_IR_IOC_0 0x0 +#define CBE_IIC_IR_IOC_1S 0xb +#define CBE_IIC_IR_PT_0 0xe +#define CBE_IIC_IR_PT_1 0xf + + u64 iic_is; /* 0x0448 */ +#define CBE_IIC_IS_PMI 0x2 + + u8 pad_0x0450_0x0500[0x0500 - 0x0450]; /* 0x0450 */ + + /* IOC FIR */ + u64 ioc_fir_reset; /* 0x0500 */ + u64 ioc_fir_set; /* 0x0508 */ + u64 ioc_checkstop_enable; /* 0x0510 */ + u64 ioc_fir_error_mask; /* 0x0518 */ + u64 ioc_syserr_enable; /* 0x0520 */ + u64 ioc_fir; /* 0x0528 */ + + u8 pad_0x0530_0x1000[0x1000 - 0x0530]; /* 0x0530 */ +}; + +extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np); +extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu); + + +struct cbe_mic_tm_regs { + u8 pad_0x0000_0x0040[0x0040 - 0x0000]; /* 0x0000 */ + + u64 mic_ctl_cnfg2; /* 0x0040 */ +#define CBE_MIC_ENABLE_AUX_TRC 0x8000000000000000LL +#define CBE_MIC_DISABLE_PWR_SAV_2 0x0200000000000000LL +#define CBE_MIC_DISABLE_AUX_TRC_WRAP 0x0100000000000000LL +#define CBE_MIC_ENABLE_AUX_TRC_INT 0x0080000000000000LL + + u64 pad_0x0048; /* 0x0048 */ + + u64 mic_aux_trc_base; /* 0x0050 */ + u64 mic_aux_trc_max_addr; /* 0x0058 */ + u64 mic_aux_trc_cur_addr; /* 0x0060 */ + u64 mic_aux_trc_grf_addr; /* 0x0068 */ + u64 mic_aux_trc_grf_data; /* 0x0070 */ + + u64 pad_0x0078; /* 0x0078 */ + + u64 mic_ctl_cnfg_0; /* 0x0080 */ +#define CBE_MIC_DISABLE_PWR_SAV_0 0x8000000000000000LL + + u64 pad_0x0088; /* 0x0088 */ + + u64 slow_fast_timer_0; /* 0x0090 */ + u64 slow_next_timer_0; /* 0x0098 */ + + u8 pad_0x00a0_0x00f8[0x00f8 - 0x00a0]; /* 0x00a0 */ + u64 mic_df_ecc_address_0; /* 0x00f8 */ + + u8 pad_0x0100_0x01b8[0x01b8 - 0x0100]; /* 0x0100 */ + u64 mic_df_ecc_address_1; /* 0x01b8 */ + + u64 mic_ctl_cnfg_1; /* 0x01c0 */ +#define CBE_MIC_DISABLE_PWR_SAV_1 0x8000000000000000LL + + u64 pad_0x01c8; /* 0x01c8 */ + + u64 slow_fast_timer_1; /* 0x01d0 */ + u64 slow_next_timer_1; /* 0x01d8 */ + + u8 pad_0x01e0_0x0208[0x0208 - 0x01e0]; /* 0x01e0 */ + u64 mic_exc; /* 0x0208 */ +#define CBE_MIC_EXC_BLOCK_SCRUB 0x0800000000000000ULL +#define CBE_MIC_EXC_FAST_SCRUB 0x0100000000000000ULL + + u64 mic_mnt_cfg; /* 0x0210 */ +#define CBE_MIC_MNT_CFG_CHAN_0_POP 0x0002000000000000ULL +#define CBE_MIC_MNT_CFG_CHAN_1_POP 0x0004000000000000ULL + + u64 mic_df_config; /* 0x0218 */ +#define CBE_MIC_ECC_DISABLE_0 0x4000000000000000ULL +#define CBE_MIC_ECC_REP_SINGLE_0 0x2000000000000000ULL +#define CBE_MIC_ECC_DISABLE_1 0x0080000000000000ULL +#define CBE_MIC_ECC_REP_SINGLE_1 0x0040000000000000ULL + + u8 pad_0x0220_0x0230[0x0230 - 0x0220]; /* 0x0220 */ + u64 mic_fir; /* 0x0230 */ +#define CBE_MIC_FIR_ECC_SINGLE_0_ERR 0x0200000000000000ULL +#define CBE_MIC_FIR_ECC_MULTI_0_ERR 0x0100000000000000ULL +#define CBE_MIC_FIR_ECC_SINGLE_1_ERR 0x0080000000000000ULL +#define CBE_MIC_FIR_ECC_MULTI_1_ERR 0x0040000000000000ULL +#define CBE_MIC_FIR_ECC_ERR_MASK 0xffff000000000000ULL +#define CBE_MIC_FIR_ECC_SINGLE_0_CTE 0x0000020000000000ULL +#define CBE_MIC_FIR_ECC_MULTI_0_CTE 0x0000010000000000ULL +#define CBE_MIC_FIR_ECC_SINGLE_1_CTE 0x0000008000000000ULL +#define CBE_MIC_FIR_ECC_MULTI_1_CTE 0x0000004000000000ULL +#define CBE_MIC_FIR_ECC_CTE_MASK 0x0000ffff00000000ULL +#define CBE_MIC_FIR_ECC_SINGLE_0_RESET 0x0000000002000000ULL +#define CBE_MIC_FIR_ECC_MULTI_0_RESET 0x0000000001000000ULL +#define CBE_MIC_FIR_ECC_SINGLE_1_RESET 0x0000000000800000ULL +#define CBE_MIC_FIR_ECC_MULTI_1_RESET 0x0000000000400000ULL +#define CBE_MIC_FIR_ECC_RESET_MASK 0x00000000ffff0000ULL +#define CBE_MIC_FIR_ECC_SINGLE_0_SET 0x0000000000000200ULL +#define CBE_MIC_FIR_ECC_MULTI_0_SET 0x0000000000000100ULL +#define CBE_MIC_FIR_ECC_SINGLE_1_SET 0x0000000000000080ULL +#define CBE_MIC_FIR_ECC_MULTI_1_SET 0x0000000000000040ULL +#define CBE_MIC_FIR_ECC_SET_MASK 0x000000000000ffffULL + u64 mic_fir_debug; /* 0x0238 */ + + u8 pad_0x0240_0x1000[0x1000 - 0x0240]; /* 0x0240 */ +}; + +extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np); +extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu); + + +/* Cell page table entries */ +#define CBE_IOPTE_PP_W 0x8000000000000000ul /* protection: write */ +#define CBE_IOPTE_PP_R 0x4000000000000000ul /* protection: read */ +#define CBE_IOPTE_M 0x2000000000000000ul /* coherency required */ +#define CBE_IOPTE_SO_R 0x1000000000000000ul /* ordering: writes */ +#define CBE_IOPTE_SO_RW 0x1800000000000000ul /* ordering: r & w */ +#define CBE_IOPTE_RPN_Mask 0x07fffffffffff000ul /* RPN */ +#define CBE_IOPTE_H 0x0000000000000800ul /* cache hint */ +#define CBE_IOPTE_IOID_Mask 0x00000000000007fful /* ioid */ + +/* some utility functions to deal with SMT */ +extern u32 cbe_get_hw_thread_id(int cpu); +extern u32 cbe_cpu_to_node(int cpu); +extern u32 cbe_node_to_cpu(int node); + +/* Init this module early */ +extern void cbe_regs_init(void); + + +#endif /* CBE_REGS_H */ diff --git a/arch/powerpc/include/asm/checksum.h b/arch/powerpc/include/asm/checksum.h new file mode 100644 index 000000000..82f099ba2 --- /dev/null +++ b/arch/powerpc/include/asm/checksum.h @@ -0,0 +1,214 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_CHECKSUM_H +#define _ASM_POWERPC_CHECKSUM_H +#ifdef __KERNEL__ + +/* + */ + +#include <linux/bitops.h> +#include <linux/in6.h> +/* + * Computes the checksum of a memory block at src, length len, + * and adds in "sum" (32-bit), while copying the block to dst. + * If an access exception occurs on src or dst, it stores -EFAULT + * to *src_err or *dst_err respectively (if that pointer is not + * NULL), and, for an error on src, zeroes the rest of dst. + * + * Like csum_partial, this must be called with even lengths, + * except for the last fragment. + */ +extern __wsum csum_partial_copy_generic(const void *src, void *dst, int len); + +#define _HAVE_ARCH_COPY_AND_CSUM_FROM_USER +extern __wsum csum_and_copy_from_user(const void __user *src, void *dst, + int len); +#define HAVE_CSUM_COPY_USER +extern __wsum csum_and_copy_to_user(const void *src, void __user *dst, + int len); + +#define _HAVE_ARCH_CSUM_AND_COPY +#define csum_partial_copy_nocheck(src, dst, len) \ + csum_partial_copy_generic((src), (dst), (len)) + + +/* + * turns a 32-bit partial checksum (e.g. from csum_partial) into a + * 1's complement 16-bit checksum. + */ +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned int tmp; + + /* swap the two 16-bit halves of sum */ + __asm__("rlwinm %0,%1,16,0,31" : "=r" (tmp) : "r" (sum)); + /* if there is a carry from adding the two 16-bit halves, + it will carry from the lower half into the upper half, + giving us the correct sum in the upper half. */ + return (__force __sum16)(~((__force u32)sum + tmp) >> 16); +} + +static inline u32 from64to32(u64 x) +{ + return (x + ror64(x, 32)) >> 32; +} + +static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len, + __u8 proto, __wsum sum) +{ +#ifdef __powerpc64__ + u64 s = (__force u32)sum; + + s += (__force u32)saddr; + s += (__force u32)daddr; +#ifdef __BIG_ENDIAN__ + s += proto + len; +#else + s += (proto + len) << 8; +#endif + return (__force __wsum) from64to32(s); +#else + __asm__("\n\ + addc %0,%0,%1 \n\ + adde %0,%0,%2 \n\ + adde %0,%0,%3 \n\ + addze %0,%0 \n\ + " + : "=r" (sum) + : "r" (daddr), "r"(saddr), "r"(proto + len), "0"(sum)); + return sum; +#endif +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, __u32 len, + __u8 proto, __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); +} + +#define HAVE_ARCH_CSUM_ADD +static inline __wsum csum_add(__wsum csum, __wsum addend) +{ +#ifdef __powerpc64__ + u64 res = (__force u64)csum; +#endif + if (__builtin_constant_p(csum) && csum == 0) + return addend; + if (__builtin_constant_p(addend) && addend == 0) + return csum; + +#ifdef __powerpc64__ + res += (__force u64)addend; + return (__force __wsum)((u32)res + (res >> 32)); +#else + asm("addc %0,%0,%1;" + "addze %0,%0;" + : "+r" (csum) : "r" (addend) : "xer"); + return csum; +#endif +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. ihl is the number + * of 32-bit words and is always >= 5. + */ +static inline __wsum ip_fast_csum_nofold(const void *iph, unsigned int ihl) +{ + const u32 *ptr = (const u32 *)iph + 1; +#ifdef __powerpc64__ + unsigned int i; + u64 s = *(const u32 *)iph; + + for (i = 0; i < ihl - 1; i++, ptr++) + s += *ptr; + return (__force __wsum)from64to32(s); +#else + __wsum sum, tmp; + + asm("mtctr %3;" + "addc %0,%4,%5;" + "1: lwzu %1, 4(%2);" + "adde %0,%0,%1;" + "bdnz 1b;" + "addze %0,%0;" + : "=r" (sum), "=r" (tmp), "+b" (ptr) + : "r" (ihl - 2), "r" (*(const u32 *)iph), "r" (*ptr) + : "ctr", "xer", "memory"); + + return sum; +#endif +} + +static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + return csum_fold(ip_fast_csum_nofold(iph, ihl)); +} + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum __csum_partial(const void *buff, int len, __wsum sum); + +static inline __wsum csum_partial(const void *buff, int len, __wsum sum) +{ + if (__builtin_constant_p(len) && len <= 16 && (len & 1) == 0) { + if (len == 2) + sum = csum_add(sum, (__force __wsum)*(const u16 *)buff); + if (len >= 4) + sum = csum_add(sum, (__force __wsum)*(const u32 *)buff); + if (len == 6) + sum = csum_add(sum, (__force __wsum) + *(const u16 *)(buff + 4)); + if (len >= 8) + sum = csum_add(sum, (__force __wsum) + *(const u32 *)(buff + 4)); + if (len == 10) + sum = csum_add(sum, (__force __wsum) + *(const u16 *)(buff + 8)); + if (len >= 12) + sum = csum_add(sum, (__force __wsum) + *(const u32 *)(buff + 8)); + if (len == 14) + sum = csum_add(sum, (__force __wsum) + *(const u16 *)(buff + 12)); + if (len >= 16) + sum = csum_add(sum, (__force __wsum) + *(const u32 *)(buff + 12)); + } else if (__builtin_constant_p(len) && (len & 3) == 0) { + sum = csum_add(sum, ip_fast_csum_nofold(buff, len >> 2)); + } else { + sum = __csum_partial(buff, len, sum); + } + return sum; +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +#define _HAVE_ARCH_IPV6_CSUM +__sum16 csum_ipv6_magic(const struct in6_addr *saddr, + const struct in6_addr *daddr, + __u32 len, __u8 proto, __wsum sum); + +#endif /* __KERNEL__ */ +#endif diff --git a/arch/powerpc/include/asm/cmpxchg.h b/arch/powerpc/include/asm/cmpxchg.h new file mode 100644 index 000000000..cf091c4c2 --- /dev/null +++ b/arch/powerpc/include/asm/cmpxchg.h @@ -0,0 +1,531 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_CMPXCHG_H_ +#define _ASM_POWERPC_CMPXCHG_H_ + +#ifdef __KERNEL__ +#include <linux/compiler.h> +#include <asm/synch.h> +#include <linux/bug.h> + +#ifdef __BIG_ENDIAN +#define BITOFF_CAL(size, off) ((sizeof(u32) - size - off) * BITS_PER_BYTE) +#else +#define BITOFF_CAL(size, off) (off * BITS_PER_BYTE) +#endif + +#define XCHG_GEN(type, sfx, cl) \ +static inline u32 __xchg_##type##sfx(volatile void *p, u32 val) \ +{ \ + unsigned int prev, prev_mask, tmp, bitoff, off; \ + \ + off = (unsigned long)p % sizeof(u32); \ + bitoff = BITOFF_CAL(sizeof(type), off); \ + p -= off; \ + val <<= bitoff; \ + prev_mask = (u32)(type)-1 << bitoff; \ + \ + __asm__ __volatile__( \ +"1: lwarx %0,0,%3\n" \ +" andc %1,%0,%5\n" \ +" or %1,%1,%4\n" \ +" stwcx. %1,0,%3\n" \ +" bne- 1b\n" \ + : "=&r" (prev), "=&r" (tmp), "+m" (*(u32*)p) \ + : "r" (p), "r" (val), "r" (prev_mask) \ + : "cc", cl); \ + \ + return prev >> bitoff; \ +} + +#define CMPXCHG_GEN(type, sfx, br, br2, cl) \ +static inline \ +u32 __cmpxchg_##type##sfx(volatile void *p, u32 old, u32 new) \ +{ \ + unsigned int prev, prev_mask, tmp, bitoff, off; \ + \ + off = (unsigned long)p % sizeof(u32); \ + bitoff = BITOFF_CAL(sizeof(type), off); \ + p -= off; \ + old <<= bitoff; \ + new <<= bitoff; \ + prev_mask = (u32)(type)-1 << bitoff; \ + \ + __asm__ __volatile__( \ + br \ +"1: lwarx %0,0,%3\n" \ +" and %1,%0,%6\n" \ +" cmpw 0,%1,%4\n" \ +" bne- 2f\n" \ +" andc %1,%0,%6\n" \ +" or %1,%1,%5\n" \ +" stwcx. %1,0,%3\n" \ +" bne- 1b\n" \ + br2 \ + "\n" \ +"2:" \ + : "=&r" (prev), "=&r" (tmp), "+m" (*(u32*)p) \ + : "r" (p), "r" (old), "r" (new), "r" (prev_mask) \ + : "cc", cl); \ + \ + return prev >> bitoff; \ +} + +/* + * Atomic exchange + * + * Changes the memory location '*p' to be val and returns + * the previous value stored there. + */ + +XCHG_GEN(u8, _local, "memory"); +XCHG_GEN(u8, _relaxed, "cc"); +XCHG_GEN(u16, _local, "memory"); +XCHG_GEN(u16, _relaxed, "cc"); + +static __always_inline unsigned long +__xchg_u32_local(volatile void *p, unsigned long val) +{ + unsigned long prev; + + __asm__ __volatile__( +"1: lwarx %0,0,%2 \n" +" stwcx. %3,0,%2 \n\ + bne- 1b" + : "=&r" (prev), "+m" (*(volatile unsigned int *)p) + : "r" (p), "r" (val) + : "cc", "memory"); + + return prev; +} + +static __always_inline unsigned long +__xchg_u32_relaxed(u32 *p, unsigned long val) +{ + unsigned long prev; + + __asm__ __volatile__( +"1: lwarx %0,0,%2\n" +" stwcx. %3,0,%2\n" +" bne- 1b" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (val) + : "cc"); + + return prev; +} + +#ifdef CONFIG_PPC64 +static __always_inline unsigned long +__xchg_u64_local(volatile void *p, unsigned long val) +{ + unsigned long prev; + + __asm__ __volatile__( +"1: ldarx %0,0,%2 \n" +" stdcx. %3,0,%2 \n\ + bne- 1b" + : "=&r" (prev), "+m" (*(volatile unsigned long *)p) + : "r" (p), "r" (val) + : "cc", "memory"); + + return prev; +} + +static __always_inline unsigned long +__xchg_u64_relaxed(u64 *p, unsigned long val) +{ + unsigned long prev; + + __asm__ __volatile__( +"1: ldarx %0,0,%2\n" +" stdcx. %3,0,%2\n" +" bne- 1b" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (val) + : "cc"); + + return prev; +} +#endif + +static __always_inline unsigned long +__xchg_local(void *ptr, unsigned long x, unsigned int size) +{ + switch (size) { + case 1: + return __xchg_u8_local(ptr, x); + case 2: + return __xchg_u16_local(ptr, x); + case 4: + return __xchg_u32_local(ptr, x); +#ifdef CONFIG_PPC64 + case 8: + return __xchg_u64_local(ptr, x); +#endif + } + BUILD_BUG_ON_MSG(1, "Unsupported size for __xchg"); + return x; +} + +static __always_inline unsigned long +__xchg_relaxed(void *ptr, unsigned long x, unsigned int size) +{ + switch (size) { + case 1: + return __xchg_u8_relaxed(ptr, x); + case 2: + return __xchg_u16_relaxed(ptr, x); + case 4: + return __xchg_u32_relaxed(ptr, x); +#ifdef CONFIG_PPC64 + case 8: + return __xchg_u64_relaxed(ptr, x); +#endif + } + BUILD_BUG_ON_MSG(1, "Unsupported size for __xchg_local"); + return x; +} +#define xchg_local(ptr,x) \ + ({ \ + __typeof__(*(ptr)) _x_ = (x); \ + (__typeof__(*(ptr))) __xchg_local((ptr), \ + (unsigned long)_x_, sizeof(*(ptr))); \ + }) + +#define xchg_relaxed(ptr, x) \ +({ \ + __typeof__(*(ptr)) _x_ = (x); \ + (__typeof__(*(ptr))) __xchg_relaxed((ptr), \ + (unsigned long)_x_, sizeof(*(ptr))); \ +}) +/* + * Compare and exchange - if *p == old, set it to new, + * and return the old value of *p. + */ + +CMPXCHG_GEN(u8, , PPC_ATOMIC_ENTRY_BARRIER, PPC_ATOMIC_EXIT_BARRIER, "memory"); +CMPXCHG_GEN(u8, _local, , , "memory"); +CMPXCHG_GEN(u8, _acquire, , PPC_ACQUIRE_BARRIER, "memory"); +CMPXCHG_GEN(u8, _relaxed, , , "cc"); +CMPXCHG_GEN(u16, , PPC_ATOMIC_ENTRY_BARRIER, PPC_ATOMIC_EXIT_BARRIER, "memory"); +CMPXCHG_GEN(u16, _local, , , "memory"); +CMPXCHG_GEN(u16, _acquire, , PPC_ACQUIRE_BARRIER, "memory"); +CMPXCHG_GEN(u16, _relaxed, , , "cc"); + +static __always_inline unsigned long +__cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new) +{ + unsigned int prev; + + __asm__ __volatile__ ( + PPC_ATOMIC_ENTRY_BARRIER +"1: lwarx %0,0,%2 # __cmpxchg_u32\n\ + cmpw 0,%0,%3\n\ + bne- 2f\n" +" stwcx. %4,0,%2\n\ + bne- 1b" + PPC_ATOMIC_EXIT_BARRIER + "\n\ +2:" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (old), "r" (new) + : "cc", "memory"); + + return prev; +} + +static __always_inline unsigned long +__cmpxchg_u32_local(volatile unsigned int *p, unsigned long old, + unsigned long new) +{ + unsigned int prev; + + __asm__ __volatile__ ( +"1: lwarx %0,0,%2 # __cmpxchg_u32\n\ + cmpw 0,%0,%3\n\ + bne- 2f\n" +" stwcx. %4,0,%2\n\ + bne- 1b" + "\n\ +2:" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (old), "r" (new) + : "cc", "memory"); + + return prev; +} + +static __always_inline unsigned long +__cmpxchg_u32_relaxed(u32 *p, unsigned long old, unsigned long new) +{ + unsigned long prev; + + __asm__ __volatile__ ( +"1: lwarx %0,0,%2 # __cmpxchg_u32_relaxed\n" +" cmpw 0,%0,%3\n" +" bne- 2f\n" +" stwcx. %4,0,%2\n" +" bne- 1b\n" +"2:" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (old), "r" (new) + : "cc"); + + return prev; +} + +/* + * cmpxchg family don't have order guarantee if cmp part fails, therefore we + * can avoid superfluous barriers if we use assembly code to implement + * cmpxchg() and cmpxchg_acquire(), however we don't do the similar for + * cmpxchg_release() because that will result in putting a barrier in the + * middle of a ll/sc loop, which is probably a bad idea. For example, this + * might cause the conditional store more likely to fail. + */ +static __always_inline unsigned long +__cmpxchg_u32_acquire(u32 *p, unsigned long old, unsigned long new) +{ + unsigned long prev; + + __asm__ __volatile__ ( +"1: lwarx %0,0,%2 # __cmpxchg_u32_acquire\n" +" cmpw 0,%0,%3\n" +" bne- 2f\n" +" stwcx. %4,0,%2\n" +" bne- 1b\n" + PPC_ACQUIRE_BARRIER + "\n" +"2:" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (old), "r" (new) + : "cc", "memory"); + + return prev; +} + +#ifdef CONFIG_PPC64 +static __always_inline unsigned long +__cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new) +{ + unsigned long prev; + + __asm__ __volatile__ ( + PPC_ATOMIC_ENTRY_BARRIER +"1: ldarx %0,0,%2 # __cmpxchg_u64\n\ + cmpd 0,%0,%3\n\ + bne- 2f\n\ + stdcx. %4,0,%2\n\ + bne- 1b" + PPC_ATOMIC_EXIT_BARRIER + "\n\ +2:" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (old), "r" (new) + : "cc", "memory"); + + return prev; +} + +static __always_inline unsigned long +__cmpxchg_u64_local(volatile unsigned long *p, unsigned long old, + unsigned long new) +{ + unsigned long prev; + + __asm__ __volatile__ ( +"1: ldarx %0,0,%2 # __cmpxchg_u64\n\ + cmpd 0,%0,%3\n\ + bne- 2f\n\ + stdcx. %4,0,%2\n\ + bne- 1b" + "\n\ +2:" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (old), "r" (new) + : "cc", "memory"); + + return prev; +} + +static __always_inline unsigned long +__cmpxchg_u64_relaxed(u64 *p, unsigned long old, unsigned long new) +{ + unsigned long prev; + + __asm__ __volatile__ ( +"1: ldarx %0,0,%2 # __cmpxchg_u64_relaxed\n" +" cmpd 0,%0,%3\n" +" bne- 2f\n" +" stdcx. %4,0,%2\n" +" bne- 1b\n" +"2:" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (old), "r" (new) + : "cc"); + + return prev; +} + +static __always_inline unsigned long +__cmpxchg_u64_acquire(u64 *p, unsigned long old, unsigned long new) +{ + unsigned long prev; + + __asm__ __volatile__ ( +"1: ldarx %0,0,%2 # __cmpxchg_u64_acquire\n" +" cmpd 0,%0,%3\n" +" bne- 2f\n" +" stdcx. %4,0,%2\n" +" bne- 1b\n" + PPC_ACQUIRE_BARRIER + "\n" +"2:" + : "=&r" (prev), "+m" (*p) + : "r" (p), "r" (old), "r" (new) + : "cc", "memory"); + + return prev; +} +#endif + +static __always_inline unsigned long +__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, + unsigned int size) +{ + switch (size) { + case 1: + return __cmpxchg_u8(ptr, old, new); + case 2: + return __cmpxchg_u16(ptr, old, new); + case 4: + return __cmpxchg_u32(ptr, old, new); +#ifdef CONFIG_PPC64 + case 8: + return __cmpxchg_u64(ptr, old, new); +#endif + } + BUILD_BUG_ON_MSG(1, "Unsupported size for __cmpxchg"); + return old; +} + +static __always_inline unsigned long +__cmpxchg_local(void *ptr, unsigned long old, unsigned long new, + unsigned int size) +{ + switch (size) { + case 1: + return __cmpxchg_u8_local(ptr, old, new); + case 2: + return __cmpxchg_u16_local(ptr, old, new); + case 4: + return __cmpxchg_u32_local(ptr, old, new); +#ifdef CONFIG_PPC64 + case 8: + return __cmpxchg_u64_local(ptr, old, new); +#endif + } + BUILD_BUG_ON_MSG(1, "Unsupported size for __cmpxchg_local"); + return old; +} + +static __always_inline unsigned long +__cmpxchg_relaxed(void *ptr, unsigned long old, unsigned long new, + unsigned int size) +{ + switch (size) { + case 1: + return __cmpxchg_u8_relaxed(ptr, old, new); + case 2: + return __cmpxchg_u16_relaxed(ptr, old, new); + case 4: + return __cmpxchg_u32_relaxed(ptr, old, new); +#ifdef CONFIG_PPC64 + case 8: + return __cmpxchg_u64_relaxed(ptr, old, new); +#endif + } + BUILD_BUG_ON_MSG(1, "Unsupported size for __cmpxchg_relaxed"); + return old; +} + +static __always_inline unsigned long +__cmpxchg_acquire(void *ptr, unsigned long old, unsigned long new, + unsigned int size) +{ + switch (size) { + case 1: + return __cmpxchg_u8_acquire(ptr, old, new); + case 2: + return __cmpxchg_u16_acquire(ptr, old, new); + case 4: + return __cmpxchg_u32_acquire(ptr, old, new); +#ifdef CONFIG_PPC64 + case 8: + return __cmpxchg_u64_acquire(ptr, old, new); +#endif + } + BUILD_BUG_ON_MSG(1, "Unsupported size for __cmpxchg_acquire"); + return old; +} +#define cmpxchg(ptr, o, n) \ + ({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, sizeof(*(ptr))); \ + }) + + +#define cmpxchg_local(ptr, o, n) \ + ({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, sizeof(*(ptr))); \ + }) + +#define cmpxchg_relaxed(ptr, o, n) \ +({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg_relaxed((ptr), \ + (unsigned long)_o_, (unsigned long)_n_, \ + sizeof(*(ptr))); \ +}) + +#define cmpxchg_acquire(ptr, o, n) \ +({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg_acquire((ptr), \ + (unsigned long)_o_, (unsigned long)_n_, \ + sizeof(*(ptr))); \ +}) +#ifdef CONFIG_PPC64 +#define cmpxchg64(ptr, o, n) \ + ({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg((ptr), (o), (n)); \ + }) +#define cmpxchg64_local(ptr, o, n) \ + ({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg_local((ptr), (o), (n)); \ + }) +#define cmpxchg64_relaxed(ptr, o, n) \ +({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg_relaxed((ptr), (o), (n)); \ +}) +#define cmpxchg64_acquire(ptr, o, n) \ +({ \ + BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ + cmpxchg_acquire((ptr), (o), (n)); \ +}) +#else +#include <asm-generic/cmpxchg-local.h> +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_CMPXCHG_H_ */ diff --git a/arch/powerpc/include/asm/code-patching-asm.h b/arch/powerpc/include/asm/code-patching-asm.h new file mode 100644 index 000000000..ed7b14484 --- /dev/null +++ b/arch/powerpc/include/asm/code-patching-asm.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018, Michael Ellerman, IBM Corporation. + */ +#ifndef _ASM_POWERPC_CODE_PATCHING_ASM_H +#define _ASM_POWERPC_CODE_PATCHING_ASM_H + +/* Define a "site" that can be patched */ +.macro patch_site label name + .pushsection ".rodata" + .balign 4 + .global \name +\name: + .4byte \label - . + .popsection +.endm + +#endif /* _ASM_POWERPC_CODE_PATCHING_ASM_H */ diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h new file mode 100644 index 000000000..fa8746c32 --- /dev/null +++ b/arch/powerpc/include/asm/code-patching.h @@ -0,0 +1,191 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_CODE_PATCHING_H +#define _ASM_POWERPC_CODE_PATCHING_H + +/* + * Copyright 2008, Michael Ellerman, IBM Corporation. + */ + +#include <asm/types.h> +#include <asm/ppc-opcode.h> +#include <linux/string.h> +#include <linux/kallsyms.h> +#include <asm/asm-compat.h> +#include <asm/inst.h> + +/* Flags for create_branch: + * "b" == create_branch(addr, target, 0); + * "ba" == create_branch(addr, target, BRANCH_ABSOLUTE); + * "bl" == create_branch(addr, target, BRANCH_SET_LINK); + * "bla" == create_branch(addr, target, BRANCH_ABSOLUTE | BRANCH_SET_LINK); + */ +#define BRANCH_SET_LINK 0x1 +#define BRANCH_ABSOLUTE 0x2 + +bool is_offset_in_branch_range(long offset); +bool is_offset_in_cond_branch_range(long offset); +int create_branch(struct ppc_inst *instr, const struct ppc_inst *addr, + unsigned long target, int flags); +int create_cond_branch(struct ppc_inst *instr, const struct ppc_inst *addr, + unsigned long target, int flags); +int patch_branch(struct ppc_inst *addr, unsigned long target, int flags); +int patch_instruction(struct ppc_inst *addr, struct ppc_inst instr); +int raw_patch_instruction(struct ppc_inst *addr, struct ppc_inst instr); + +static inline unsigned long patch_site_addr(s32 *site) +{ + return (unsigned long)site + *site; +} + +static inline int patch_instruction_site(s32 *site, struct ppc_inst instr) +{ + return patch_instruction((struct ppc_inst *)patch_site_addr(site), instr); +} + +static inline int patch_branch_site(s32 *site, unsigned long target, int flags) +{ + return patch_branch((struct ppc_inst *)patch_site_addr(site), target, flags); +} + +static inline int modify_instruction(unsigned int *addr, unsigned int clr, + unsigned int set) +{ + return patch_instruction((struct ppc_inst *)addr, ppc_inst((*addr & ~clr) | set)); +} + +static inline int modify_instruction_site(s32 *site, unsigned int clr, unsigned int set) +{ + return modify_instruction((unsigned int *)patch_site_addr(site), clr, set); +} + +int instr_is_relative_branch(struct ppc_inst instr); +int instr_is_relative_link_branch(struct ppc_inst instr); +int instr_is_branch_to_addr(const struct ppc_inst *instr, unsigned long addr); +unsigned long branch_target(const struct ppc_inst *instr); +int translate_branch(struct ppc_inst *instr, const struct ppc_inst *dest, + const struct ppc_inst *src); +extern bool is_conditional_branch(struct ppc_inst instr); +#ifdef CONFIG_PPC_BOOK3E_64 +void __patch_exception(int exc, unsigned long addr); +#define patch_exception(exc, name) do { \ + extern unsigned int name; \ + __patch_exception((exc), (unsigned long)&name); \ +} while (0) +#endif + +#define OP_RT_RA_MASK 0xffff0000UL +#define LIS_R2 0x3c400000UL +#define ADDIS_R2_R12 0x3c4c0000UL +#define ADDI_R2_R2 0x38420000UL + +static inline unsigned long ppc_function_entry(void *func) +{ +#ifdef PPC64_ELF_ABI_v2 + u32 *insn = func; + + /* + * A PPC64 ABIv2 function may have a local and a global entry + * point. We need to use the local entry point when patching + * functions, so identify and step over the global entry point + * sequence. + * + * The global entry point sequence is always of the form: + * + * addis r2,r12,XXXX + * addi r2,r2,XXXX + * + * A linker optimisation may convert the addis to lis: + * + * lis r2,XXXX + * addi r2,r2,XXXX + */ + if ((((*insn & OP_RT_RA_MASK) == ADDIS_R2_R12) || + ((*insn & OP_RT_RA_MASK) == LIS_R2)) && + ((*(insn+1) & OP_RT_RA_MASK) == ADDI_R2_R2)) + return (unsigned long)(insn + 2); + else + return (unsigned long)func; +#elif defined(PPC64_ELF_ABI_v1) + /* + * On PPC64 ABIv1 the function pointer actually points to the + * function's descriptor. The first entry in the descriptor is the + * address of the function text. + */ + return ((func_descr_t *)func)->entry; +#else + return (unsigned long)func; +#endif +} + +static inline unsigned long ppc_global_function_entry(void *func) +{ +#ifdef PPC64_ELF_ABI_v2 + /* PPC64 ABIv2 the global entry point is at the address */ + return (unsigned long)func; +#else + /* All other cases there is no change vs ppc_function_entry() */ + return ppc_function_entry(func); +#endif +} + +/* + * Wrapper around kallsyms_lookup() to return function entry address: + * - For ABIv1, we lookup the dot variant. + * - For ABIv2, we return the local entry point. + */ +static inline unsigned long ppc_kallsyms_lookup_name(const char *name) +{ + unsigned long addr; +#ifdef PPC64_ELF_ABI_v1 + /* check for dot variant */ + char dot_name[1 + KSYM_NAME_LEN]; + bool dot_appended = false; + + if (strnlen(name, KSYM_NAME_LEN) >= KSYM_NAME_LEN) + return 0; + + if (name[0] != '.') { + dot_name[0] = '.'; + dot_name[1] = '\0'; + strlcat(dot_name, name, sizeof(dot_name)); + dot_appended = true; + } else { + dot_name[0] = '\0'; + strlcat(dot_name, name, sizeof(dot_name)); + } + addr = kallsyms_lookup_name(dot_name); + if (!addr && dot_appended) + /* Let's try the original non-dot symbol lookup */ + addr = kallsyms_lookup_name(name); +#elif defined(PPC64_ELF_ABI_v2) + addr = kallsyms_lookup_name(name); + if (addr) + addr = ppc_function_entry((void *)addr); +#else + addr = kallsyms_lookup_name(name); +#endif + return addr; +} + +#ifdef CONFIG_PPC64 +/* + * Some instruction encodings commonly used in dynamic ftracing + * and function live patching. + */ + +/* This must match the definition of STK_GOT in <asm/ppc_asm.h> */ +#ifdef PPC64_ELF_ABI_v2 +#define R2_STACK_OFFSET 24 +#else +#define R2_STACK_OFFSET 40 +#endif + +#define PPC_INST_LD_TOC (PPC_INST_LD | ___PPC_RT(__REG_R2) | \ + ___PPC_RA(__REG_R1) | R2_STACK_OFFSET) + +/* usually preceded by a mflr r0 */ +#define PPC_INST_STD_LR (PPC_INST_STD | ___PPC_RS(__REG_R0) | \ + ___PPC_RA(__REG_R1) | PPC_LR_STKOFF) +#endif /* CONFIG_PPC64 */ + +#endif /* _ASM_POWERPC_CODE_PATCHING_H */ diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h new file mode 100644 index 000000000..9191fc29e --- /dev/null +++ b/arch/powerpc/include/asm/compat.h @@ -0,0 +1,181 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_COMPAT_H +#define _ASM_POWERPC_COMPAT_H +#ifdef __KERNEL__ +/* + * Architecture specific compatibility types + */ +#include <linux/types.h> +#include <linux/sched.h> + +#include <asm-generic/compat.h> + +#define COMPAT_USER_HZ 100 +#ifdef __BIG_ENDIAN__ +#define COMPAT_UTS_MACHINE "ppc\0\0" +#else +#define COMPAT_UTS_MACHINE "ppcle\0\0" +#endif + +typedef u32 __compat_uid_t; +typedef u32 __compat_gid_t; +typedef u32 __compat_uid32_t; +typedef u32 __compat_gid32_t; +typedef u32 compat_mode_t; +typedef u32 compat_dev_t; +typedef s16 compat_nlink_t; +typedef u16 compat_ipc_pid_t; +typedef u32 compat_caddr_t; +typedef __kernel_fsid_t compat_fsid_t; + +struct compat_stat { + compat_dev_t st_dev; + compat_ino_t st_ino; + compat_mode_t st_mode; + compat_nlink_t st_nlink; + __compat_uid32_t st_uid; + __compat_gid32_t st_gid; + compat_dev_t st_rdev; + compat_off_t st_size; + compat_off_t st_blksize; + compat_off_t st_blocks; + old_time32_t st_atime; + u32 st_atime_nsec; + old_time32_t st_mtime; + u32 st_mtime_nsec; + old_time32_t st_ctime; + u32 st_ctime_nsec; + u32 __unused4[2]; +}; + +struct compat_flock { + short l_type; + short l_whence; + compat_off_t l_start; + compat_off_t l_len; + compat_pid_t l_pid; +}; + +#define F_GETLK64 12 /* using 'struct flock64' */ +#define F_SETLK64 13 +#define F_SETLKW64 14 + +struct compat_flock64 { + short l_type; + short l_whence; + compat_loff_t l_start; + compat_loff_t l_len; + compat_pid_t l_pid; +}; + +struct compat_statfs { + int f_type; + int f_bsize; + int f_blocks; + int f_bfree; + int f_bavail; + int f_files; + int f_ffree; + compat_fsid_t f_fsid; + int f_namelen; /* SunOS ignores this field. */ + int f_frsize; + int f_flags; + int f_spare[4]; +}; + +#define COMPAT_RLIM_INFINITY 0xffffffff + +typedef u32 compat_old_sigset_t; + +#define _COMPAT_NSIG 64 +#define _COMPAT_NSIG_BPW 32 + +typedef u32 compat_sigset_word; + +#define COMPAT_OFF_T_MAX 0x7fffffff + +static inline void __user *arch_compat_alloc_user_space(long len) +{ + struct pt_regs *regs = current->thread.regs; + unsigned long usp = regs->gpr[1]; + + /* + * We can't access below the stack pointer in the 32bit ABI and + * can access 288 bytes in the 64bit big-endian ABI, + * or 512 bytes with the new ELFv2 little-endian ABI. + */ + if (!is_32bit_task()) + usp -= USER_REDZONE_SIZE; + + return (void __user *) (usp - len); +} + +/* + * ipc64_perm is actually 32/64bit clean but since the compat layer refers to + * it we may as well define it. + */ +struct compat_ipc64_perm { + compat_key_t key; + __compat_uid_t uid; + __compat_gid_t gid; + __compat_uid_t cuid; + __compat_gid_t cgid; + compat_mode_t mode; + unsigned int seq; + unsigned int __pad2; + unsigned long __unused1; /* yes they really are 64bit pads */ + unsigned long __unused2; +}; + +struct compat_semid64_ds { + struct compat_ipc64_perm sem_perm; + unsigned int sem_otime_high; + unsigned int sem_otime; + unsigned int sem_ctime_high; + unsigned int sem_ctime; + compat_ulong_t sem_nsems; + compat_ulong_t __unused3; + compat_ulong_t __unused4; +}; + +struct compat_msqid64_ds { + struct compat_ipc64_perm msg_perm; + unsigned int msg_stime_high; + unsigned int msg_stime; + unsigned int msg_rtime_high; + unsigned int msg_rtime; + unsigned int msg_ctime_high; + unsigned int msg_ctime; + compat_ulong_t msg_cbytes; + compat_ulong_t msg_qnum; + compat_ulong_t msg_qbytes; + compat_pid_t msg_lspid; + compat_pid_t msg_lrpid; + compat_ulong_t __unused4; + compat_ulong_t __unused5; +}; + +struct compat_shmid64_ds { + struct compat_ipc64_perm shm_perm; + unsigned int shm_atime_high; + unsigned int shm_atime; + unsigned int shm_dtime_high; + unsigned int shm_dtime; + unsigned int shm_ctime_high; + unsigned int shm_ctime; + unsigned int __unused4; + compat_size_t shm_segsz; + compat_pid_t shm_cpid; + compat_pid_t shm_lpid; + compat_ulong_t shm_nattch; + compat_ulong_t __unused5; + compat_ulong_t __unused6; +}; + +static inline int is_compat_task(void) +{ + return is_32bit_task(); +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_COMPAT_H */ diff --git a/arch/powerpc/include/asm/context_tracking.h b/arch/powerpc/include/asm/context_tracking.h new file mode 100644 index 000000000..f2682b28b --- /dev/null +++ b/arch/powerpc/include/asm/context_tracking.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_CONTEXT_TRACKING_H +#define _ASM_POWERPC_CONTEXT_TRACKING_H + +#ifdef CONFIG_CONTEXT_TRACKING +#define SCHEDULE_USER bl schedule_user +#else +#define SCHEDULE_USER bl schedule +#endif + +#endif diff --git a/arch/powerpc/include/asm/copro.h b/arch/powerpc/include/asm/copro.h new file mode 100644 index 000000000..fd2e166ea --- /dev/null +++ b/arch/powerpc/include/asm/copro.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2014 IBM Corp. + */ + +#ifndef _ASM_POWERPC_COPRO_H +#define _ASM_POWERPC_COPRO_H + +#include <linux/mm_types.h> + +struct copro_slb +{ + u64 esid, vsid; +}; + +int copro_handle_mm_fault(struct mm_struct *mm, unsigned long ea, + unsigned long dsisr, vm_fault_t *flt); + +int copro_calculate_slb(struct mm_struct *mm, u64 ea, struct copro_slb *slb); + + +#ifdef CONFIG_PPC_COPRO_BASE +void copro_flush_all_slbs(struct mm_struct *mm); +#else +static inline void copro_flush_all_slbs(struct mm_struct *mm) {} +#endif +#endif /* _ASM_POWERPC_COPRO_H */ diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h new file mode 100644 index 000000000..ce483b0f8 --- /dev/null +++ b/arch/powerpc/include/asm/cpm.h @@ -0,0 +1 @@ +#include <soc/fsl/cpm.h> diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h new file mode 100644 index 000000000..3bdd74739 --- /dev/null +++ b/arch/powerpc/include/asm/cpm1.h @@ -0,0 +1,612 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * MPC8xx Communication Processor Module. + * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) + * + * This file contains structures and information for the communication + * processor channels. Some CPM control and status is available + * through the MPC8xx internal memory map. See immap.h for details. + * This file only contains what I need for the moment, not the total + * CPM capabilities. I (or someone else) will add definitions as they + * are needed. -- Dan + * + * On the MBX board, EPPC-Bug loads CPM microcode into the first 512 + * bytes of the DP RAM and relocates the I2C parameter area to the + * IDMA1 space. The remaining DP RAM is available for buffer descriptors + * or other use. + */ +#ifndef __CPM1__ +#define __CPM1__ + +#include <linux/init.h> +#include <asm/8xx_immap.h> +#include <asm/ptrace.h> +#include <asm/cpm.h> + +/* CPM Command register. +*/ +#define CPM_CR_RST ((ushort)0x8000) +#define CPM_CR_OPCODE ((ushort)0x0f00) +#define CPM_CR_CHAN ((ushort)0x00f0) +#define CPM_CR_FLG ((ushort)0x0001) + +/* Channel numbers. +*/ +#define CPM_CR_CH_SCC1 ((ushort)0x0000) +#define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */ +#define CPM_CR_CH_SCC2 ((ushort)0x0004) +#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / IDMA2 / Timers */ +#define CPM_CR_CH_TIMER CPM_CR_CH_SPI +#define CPM_CR_CH_SCC3 ((ushort)0x0008) +#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */ +#define CPM_CR_CH_SCC4 ((ushort)0x000c) +#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */ + +#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) + +/* Export the base address of the communication processor registers + * and dual port ram. + */ +extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */ + +#define cpm_dpalloc cpm_muram_alloc +#define cpm_dpfree cpm_muram_free +#define cpm_dpram_addr cpm_muram_addr +#define cpm_dpram_phys cpm_muram_dma + +extern void cpm_setbrg(uint brg, uint rate); + +extern void __init cpm_load_patch(cpm8xx_t *cp); + +extern void cpm_reset(void); + +/* Parameter RAM offsets. +*/ +#define PROFF_SCC1 ((uint)0x0000) +#define PROFF_IIC ((uint)0x0080) +#define PROFF_SCC2 ((uint)0x0100) +#define PROFF_SPI ((uint)0x0180) +#define PROFF_SCC3 ((uint)0x0200) +#define PROFF_SMC1 ((uint)0x0280) +#define PROFF_DSP1 ((uint)0x02c0) +#define PROFF_SCC4 ((uint)0x0300) +#define PROFF_SMC2 ((uint)0x0380) + +/* Define enough so I can at least use the serial port as a UART. + * The MBX uses SMC1 as the host serial port. + */ +typedef struct smc_uart { + ushort smc_rbase; /* Rx Buffer descriptor base address */ + ushort smc_tbase; /* Tx Buffer descriptor base address */ + u_char smc_rfcr; /* Rx function code */ + u_char smc_tfcr; /* Tx function code */ + ushort smc_mrblr; /* Max receive buffer length */ + uint smc_rstate; /* Internal */ + uint smc_idp; /* Internal */ + ushort smc_rbptr; /* Internal */ + ushort smc_ibc; /* Internal */ + uint smc_rxtmp; /* Internal */ + uint smc_tstate; /* Internal */ + uint smc_tdp; /* Internal */ + ushort smc_tbptr; /* Internal */ + ushort smc_tbc; /* Internal */ + uint smc_txtmp; /* Internal */ + ushort smc_maxidl; /* Maximum idle characters */ + ushort smc_tmpidl; /* Temporary idle counter */ + ushort smc_brklen; /* Last received break length */ + ushort smc_brkec; /* rcv'd break condition counter */ + ushort smc_brkcr; /* xmt break count register */ + ushort smc_rmask; /* Temporary bit mask */ + char res1[8]; /* Reserved */ + ushort smc_rpbase; /* Relocation pointer */ +} smc_uart_t; + +/* Function code bits. +*/ +#define SMC_EB ((u_char)0x10) /* Set big endian byte order */ + +/* SMC uart mode register. +*/ +#define SMCMR_REN ((ushort)0x0001) +#define SMCMR_TEN ((ushort)0x0002) +#define SMCMR_DM ((ushort)0x000c) +#define SMCMR_SM_GCI ((ushort)0x0000) +#define SMCMR_SM_UART ((ushort)0x0020) +#define SMCMR_SM_TRANS ((ushort)0x0030) +#define SMCMR_SM_MASK ((ushort)0x0030) +#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ +#define SMCMR_REVD SMCMR_PM_EVEN +#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ +#define SMCMR_BS SMCMR_PEN +#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ +#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ +#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) + +/* SMC2 as Centronics parallel printer. It is half duplex, in that + * it can only receive or transmit. The parameter ram values for + * each direction are either unique or properly overlap, so we can + * include them in one structure. + */ +typedef struct smc_centronics { + ushort scent_rbase; + ushort scent_tbase; + u_char scent_cfcr; + u_char scent_smask; + ushort scent_mrblr; + uint scent_rstate; + uint scent_r_ptr; + ushort scent_rbptr; + ushort scent_r_cnt; + uint scent_rtemp; + uint scent_tstate; + uint scent_t_ptr; + ushort scent_tbptr; + ushort scent_t_cnt; + uint scent_ttemp; + ushort scent_max_sl; + ushort scent_sl_cnt; + ushort scent_character1; + ushort scent_character2; + ushort scent_character3; + ushort scent_character4; + ushort scent_character5; + ushort scent_character6; + ushort scent_character7; + ushort scent_character8; + ushort scent_rccm; + ushort scent_rccr; +} smc_cent_t; + +/* Centronics Status Mask Register. +*/ +#define SMC_CENT_F ((u_char)0x08) +#define SMC_CENT_PE ((u_char)0x04) +#define SMC_CENT_S ((u_char)0x02) + +/* SMC Event and Mask register. +*/ +#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ +#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ +#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */ +#define SMCM_BSY ((unsigned char)0x04) +#define SMCM_TX ((unsigned char)0x02) +#define SMCM_RX ((unsigned char)0x01) + +/* Baud rate generators. +*/ +#define CPM_BRG_RST ((uint)0x00020000) +#define CPM_BRG_EN ((uint)0x00010000) +#define CPM_BRG_EXTC_INT ((uint)0x00000000) +#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000) +#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000) +#define CPM_BRG_ATB ((uint)0x00002000) +#define CPM_BRG_CD_MASK ((uint)0x00001ffe) +#define CPM_BRG_DIV16 ((uint)0x00000001) + +/* SI Clock Route Register +*/ +#define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000) +#define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000) +#define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800) +#define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100) +#define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000) +#define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000) +#define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000) +#define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000) + +/* SCCs. +*/ +#define SCC_GSMRH_IRP ((uint)0x00040000) +#define SCC_GSMRH_GDE ((uint)0x00010000) +#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) +#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) +#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) +#define SCC_GSMRH_REVD ((uint)0x00002000) +#define SCC_GSMRH_TRX ((uint)0x00001000) +#define SCC_GSMRH_TTX ((uint)0x00000800) +#define SCC_GSMRH_CDP ((uint)0x00000400) +#define SCC_GSMRH_CTSP ((uint)0x00000200) +#define SCC_GSMRH_CDS ((uint)0x00000100) +#define SCC_GSMRH_CTSS ((uint)0x00000080) +#define SCC_GSMRH_TFL ((uint)0x00000040) +#define SCC_GSMRH_RFW ((uint)0x00000020) +#define SCC_GSMRH_TXSY ((uint)0x00000010) +#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) +#define SCC_GSMRH_SYNL8 ((uint)0x00000008) +#define SCC_GSMRH_SYNL4 ((uint)0x00000004) +#define SCC_GSMRH_RTSM ((uint)0x00000002) +#define SCC_GSMRH_RSYN ((uint)0x00000001) + +#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ +#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) +#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) +#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) +#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) +#define SCC_GSMRL_TCI ((uint)0x10000000) +#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) +#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) +#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) +#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) +#define SCC_GSMRL_RINV ((uint)0x02000000) +#define SCC_GSMRL_TINV ((uint)0x01000000) +#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) +#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) +#define SCC_GSMRL_TPL_48 ((uint)0x00800000) +#define SCC_GSMRL_TPL_32 ((uint)0x00600000) +#define SCC_GSMRL_TPL_16 ((uint)0x00400000) +#define SCC_GSMRL_TPL_8 ((uint)0x00200000) +#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) +#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) +#define SCC_GSMRL_TPP_01 ((uint)0x00100000) +#define SCC_GSMRL_TPP_10 ((uint)0x00080000) +#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) +#define SCC_GSMRL_TEND ((uint)0x00040000) +#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) +#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) +#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) +#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) +#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) +#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) +#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) +#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) +#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) +#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) +#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) +#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) +#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) +#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) +#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ +#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) +#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) +#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) +#define SCC_GSMRL_ENR ((uint)0x00000020) +#define SCC_GSMRL_ENT ((uint)0x00000010) +#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) +#define SCC_GSMRL_MODE_QMC ((uint)0x0000000a) +#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) +#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) +#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) +#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) +#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) +#define SCC_GSMRL_MODE_UART ((uint)0x00000004) +#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) +#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) +#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) + +#define SCC_TODR_TOD ((ushort)0x8000) + +/* SCC Event and Mask register. +*/ +#define SCCM_TXE ((unsigned char)0x10) +#define SCCM_BSY ((unsigned char)0x04) +#define SCCM_TX ((unsigned char)0x02) +#define SCCM_RX ((unsigned char)0x01) + +typedef struct scc_param { + ushort scc_rbase; /* Rx Buffer descriptor base address */ + ushort scc_tbase; /* Tx Buffer descriptor base address */ + u_char scc_rfcr; /* Rx function code */ + u_char scc_tfcr; /* Tx function code */ + ushort scc_mrblr; /* Max receive buffer length */ + uint scc_rstate; /* Internal */ + uint scc_idp; /* Internal */ + ushort scc_rbptr; /* Internal */ + ushort scc_ibc; /* Internal */ + uint scc_rxtmp; /* Internal */ + uint scc_tstate; /* Internal */ + uint scc_tdp; /* Internal */ + ushort scc_tbptr; /* Internal */ + ushort scc_tbc; /* Internal */ + uint scc_txtmp; /* Internal */ + uint scc_rcrc; /* Internal */ + uint scc_tcrc; /* Internal */ +} sccp_t; + +/* Function code bits. +*/ +#define SCC_EB ((u_char)0x10) /* Set big endian byte order */ + +/* CPM Ethernet through SCCx. + */ +typedef struct scc_enet { + sccp_t sen_genscc; + uint sen_cpres; /* Preset CRC */ + uint sen_cmask; /* Constant mask for CRC */ + uint sen_crcec; /* CRC Error counter */ + uint sen_alec; /* alignment error counter */ + uint sen_disfc; /* discard frame counter */ + ushort sen_pads; /* Tx short frame pad character */ + ushort sen_retlim; /* Retry limit threshold */ + ushort sen_retcnt; /* Retry limit counter */ + ushort sen_maxflr; /* maximum frame length register */ + ushort sen_minflr; /* minimum frame length register */ + ushort sen_maxd1; /* maximum DMA1 length */ + ushort sen_maxd2; /* maximum DMA2 length */ + ushort sen_maxd; /* Rx max DMA */ + ushort sen_dmacnt; /* Rx DMA counter */ + ushort sen_maxb; /* Max BD byte count */ + ushort sen_gaddr1; /* Group address filter */ + ushort sen_gaddr2; + ushort sen_gaddr3; + ushort sen_gaddr4; + uint sen_tbuf0data0; /* Save area 0 - current frame */ + uint sen_tbuf0data1; /* Save area 1 - current frame */ + uint sen_tbuf0rba; /* Internal */ + uint sen_tbuf0crc; /* Internal */ + ushort sen_tbuf0bcnt; /* Internal */ + ushort sen_paddrh; /* physical address (MSB) */ + ushort sen_paddrm; + ushort sen_paddrl; /* physical address (LSB) */ + ushort sen_pper; /* persistence */ + ushort sen_rfbdptr; /* Rx first BD pointer */ + ushort sen_tfbdptr; /* Tx first BD pointer */ + ushort sen_tlbdptr; /* Tx last BD pointer */ + uint sen_tbuf1data0; /* Save area 0 - current frame */ + uint sen_tbuf1data1; /* Save area 1 - current frame */ + uint sen_tbuf1rba; /* Internal */ + uint sen_tbuf1crc; /* Internal */ + ushort sen_tbuf1bcnt; /* Internal */ + ushort sen_txlen; /* Tx Frame length counter */ + ushort sen_iaddr1; /* Individual address filter */ + ushort sen_iaddr2; + ushort sen_iaddr3; + ushort sen_iaddr4; + ushort sen_boffcnt; /* Backoff counter */ + + /* NOTE: Some versions of the manual have the following items + * incorrectly documented. Below is the proper order. + */ + ushort sen_taddrh; /* temp address (MSB) */ + ushort sen_taddrm; + ushort sen_taddrl; /* temp address (LSB) */ +} scc_enet_t; + +/* SCC Event register as used by Ethernet. +*/ +#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ +#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ +#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ +#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ +#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ +#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ + +/* SCC Mode Register (PMSR) as used by Ethernet. +*/ +#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ +#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ +#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ +#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ +#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ +#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ +#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ +#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ +#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ +#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ +#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ +#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ +#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ + +/* SCC as UART +*/ +typedef struct scc_uart { + sccp_t scc_genscc; + char res1[8]; /* Reserved */ + ushort scc_maxidl; /* Maximum idle chars */ + ushort scc_idlc; /* temp idle counter */ + ushort scc_brkcr; /* Break count register */ + ushort scc_parec; /* receive parity error counter */ + ushort scc_frmec; /* receive framing error counter */ + ushort scc_nosec; /* receive noise counter */ + ushort scc_brkec; /* receive break condition counter */ + ushort scc_brkln; /* last received break length */ + ushort scc_uaddr1; /* UART address character 1 */ + ushort scc_uaddr2; /* UART address character 2 */ + ushort scc_rtemp; /* Temp storage */ + ushort scc_toseq; /* Transmit out of sequence char */ + ushort scc_char1; /* control character 1 */ + ushort scc_char2; /* control character 2 */ + ushort scc_char3; /* control character 3 */ + ushort scc_char4; /* control character 4 */ + ushort scc_char5; /* control character 5 */ + ushort scc_char6; /* control character 6 */ + ushort scc_char7; /* control character 7 */ + ushort scc_char8; /* control character 8 */ + ushort scc_rccm; /* receive control character mask */ + ushort scc_rccr; /* receive control character register */ + ushort scc_rlbc; /* receive last break character */ +} scc_uart_t; + +/* SCC Event and Mask registers when it is used as a UART. +*/ +#define UART_SCCM_GLR ((ushort)0x1000) +#define UART_SCCM_GLT ((ushort)0x0800) +#define UART_SCCM_AB ((ushort)0x0200) +#define UART_SCCM_IDL ((ushort)0x0100) +#define UART_SCCM_GRA ((ushort)0x0080) +#define UART_SCCM_BRKE ((ushort)0x0040) +#define UART_SCCM_BRKS ((ushort)0x0020) +#define UART_SCCM_CCR ((ushort)0x0008) +#define UART_SCCM_BSY ((ushort)0x0004) +#define UART_SCCM_TX ((ushort)0x0002) +#define UART_SCCM_RX ((ushort)0x0001) + +/* The SCC PMSR when used as a UART. +*/ +#define SCU_PSMR_FLC ((ushort)0x8000) +#define SCU_PSMR_SL ((ushort)0x4000) +#define SCU_PSMR_CL ((ushort)0x3000) +#define SCU_PSMR_UM ((ushort)0x0c00) +#define SCU_PSMR_FRZ ((ushort)0x0200) +#define SCU_PSMR_RZS ((ushort)0x0100) +#define SCU_PSMR_SYN ((ushort)0x0080) +#define SCU_PSMR_DRT ((ushort)0x0040) +#define SCU_PSMR_PEN ((ushort)0x0010) +#define SCU_PSMR_RPM ((ushort)0x000c) +#define SCU_PSMR_REVP ((ushort)0x0008) +#define SCU_PSMR_TPM ((ushort)0x0003) +#define SCU_PSMR_TEVP ((ushort)0x0002) + +/* CPM Transparent mode SCC. + */ +typedef struct scc_trans { + sccp_t st_genscc; + uint st_cpres; /* Preset CRC */ + uint st_cmask; /* Constant mask for CRC */ +} scc_trans_t; + +/* IIC parameter RAM. +*/ +typedef struct iic { + ushort iic_rbase; /* Rx Buffer descriptor base address */ + ushort iic_tbase; /* Tx Buffer descriptor base address */ + u_char iic_rfcr; /* Rx function code */ + u_char iic_tfcr; /* Tx function code */ + ushort iic_mrblr; /* Max receive buffer length */ + uint iic_rstate; /* Internal */ + uint iic_rdp; /* Internal */ + ushort iic_rbptr; /* Internal */ + ushort iic_rbc; /* Internal */ + uint iic_rxtmp; /* Internal */ + uint iic_tstate; /* Internal */ + uint iic_tdp; /* Internal */ + ushort iic_tbptr; /* Internal */ + ushort iic_tbc; /* Internal */ + uint iic_txtmp; /* Internal */ + char res1[4]; /* Reserved */ + ushort iic_rpbase; /* Relocation pointer */ + char res2[2]; /* Reserved */ +} iic_t; + +/* + * RISC Controller Configuration Register definitons + */ +#define RCCR_TIME 0x8000 /* RISC Timer Enable */ +#define RCCR_TIMEP(t) (((t) & 0x3F)<<8) /* RISC Timer Period */ +#define RCCR_TIME_MASK 0x00FF /* not RISC Timer related bits */ + +/* RISC Timer Parameter RAM offset */ +#define PROFF_RTMR ((uint)0x01B0) + +typedef struct risc_timer_pram { + unsigned short tm_base; /* RISC Timer Table Base Address */ + unsigned short tm_ptr; /* RISC Timer Table Pointer (internal) */ + unsigned short r_tmr; /* RISC Timer Mode Register */ + unsigned short r_tmv; /* RISC Timer Valid Register */ + unsigned long tm_cmd; /* RISC Timer Command Register */ + unsigned long tm_cnt; /* RISC Timer Internal Count */ +} rt_pram_t; + +/* Bits in RISC Timer Command Register */ +#define TM_CMD_VALID 0x80000000 /* Valid - Enables the timer */ +#define TM_CMD_RESTART 0x40000000 /* Restart - for automatic restart */ +#define TM_CMD_PWM 0x20000000 /* Run in Pulse Width Modulation Mode */ +#define TM_CMD_NUM(n) (((n)&0xF)<<16) /* Timer Number */ +#define TM_CMD_PERIOD(p) ((p)&0xFFFF) /* Timer Period */ + +/* CPM interrupts. There are nearly 32 interrupts generated by CPM + * channels or devices. All of these are presented to the PPC core + * as a single interrupt. The CPM interrupt handler dispatches its + * own handlers, in a similar fashion to the PPC core handler. We + * use the table as defined in the manuals (i.e. no special high + * priority and SCC1 == SCCa, etc...). + */ +#define CPMVEC_NR 32 +#define CPMVEC_PIO_PC15 ((ushort)0x1f) +#define CPMVEC_SCC1 ((ushort)0x1e) +#define CPMVEC_SCC2 ((ushort)0x1d) +#define CPMVEC_SCC3 ((ushort)0x1c) +#define CPMVEC_SCC4 ((ushort)0x1b) +#define CPMVEC_PIO_PC14 ((ushort)0x1a) +#define CPMVEC_TIMER1 ((ushort)0x19) +#define CPMVEC_PIO_PC13 ((ushort)0x18) +#define CPMVEC_PIO_PC12 ((ushort)0x17) +#define CPMVEC_SDMA_CB_ERR ((ushort)0x16) +#define CPMVEC_IDMA1 ((ushort)0x15) +#define CPMVEC_IDMA2 ((ushort)0x14) +#define CPMVEC_TIMER2 ((ushort)0x12) +#define CPMVEC_RISCTIMER ((ushort)0x11) +#define CPMVEC_I2C ((ushort)0x10) +#define CPMVEC_PIO_PC11 ((ushort)0x0f) +#define CPMVEC_PIO_PC10 ((ushort)0x0e) +#define CPMVEC_TIMER3 ((ushort)0x0c) +#define CPMVEC_PIO_PC9 ((ushort)0x0b) +#define CPMVEC_PIO_PC8 ((ushort)0x0a) +#define CPMVEC_PIO_PC7 ((ushort)0x09) +#define CPMVEC_TIMER4 ((ushort)0x07) +#define CPMVEC_PIO_PC6 ((ushort)0x06) +#define CPMVEC_SPI ((ushort)0x05) +#define CPMVEC_SMC1 ((ushort)0x04) +#define CPMVEC_SMC2 ((ushort)0x03) +#define CPMVEC_PIO_PC5 ((ushort)0x02) +#define CPMVEC_PIO_PC4 ((ushort)0x01) +#define CPMVEC_ERROR ((ushort)0x00) + +/* CPM interrupt configuration vector. +*/ +#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ +#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ +#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ +#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ +#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ +#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ +#define CICR_IEN ((uint)0x00000080) /* Int. enable */ +#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ + +#define CPM_PIN_INPUT 0 +#define CPM_PIN_OUTPUT 1 +#define CPM_PIN_PRIMARY 0 +#define CPM_PIN_SECONDARY 2 +#define CPM_PIN_GPIO 4 +#define CPM_PIN_OPENDRAIN 8 +#define CPM_PIN_FALLEDGE 16 +#define CPM_PIN_ANYEDGE 0 + +enum cpm_port { + CPM_PORTA, + CPM_PORTB, + CPM_PORTC, + CPM_PORTD, + CPM_PORTE, +}; + +void cpm1_set_pin(enum cpm_port port, int pin, int flags); + +enum cpm_clk_dir { + CPM_CLK_RX, + CPM_CLK_TX, + CPM_CLK_RTX +}; + +enum cpm_clk_target { + CPM_CLK_SCC1, + CPM_CLK_SCC2, + CPM_CLK_SCC3, + CPM_CLK_SCC4, + CPM_CLK_SMC1, + CPM_CLK_SMC2, +}; + +enum cpm_clk { + CPM_BRG1, /* Baud Rate Generator 1 */ + CPM_BRG2, /* Baud Rate Generator 2 */ + CPM_BRG3, /* Baud Rate Generator 3 */ + CPM_BRG4, /* Baud Rate Generator 4 */ + CPM_CLK1, /* Clock 1 */ + CPM_CLK2, /* Clock 2 */ + CPM_CLK3, /* Clock 3 */ + CPM_CLK4, /* Clock 4 */ + CPM_CLK5, /* Clock 5 */ + CPM_CLK6, /* Clock 6 */ + CPM_CLK7, /* Clock 7 */ + CPM_CLK8, /* Clock 8 */ +}; + +int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode); +int cpm1_gpiochip_add16(struct device *dev); +int cpm1_gpiochip_add32(struct device *dev); + +#endif /* __CPM1__ */ diff --git a/arch/powerpc/include/asm/cpm2.h b/arch/powerpc/include/asm/cpm2.h new file mode 100644 index 000000000..2211b934e --- /dev/null +++ b/arch/powerpc/include/asm/cpm2.h @@ -0,0 +1,1149 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Communication Processor Module v2. + * + * This file contains structures and information for the communication + * processor channels found in the dual port RAM or parameter RAM. + * All CPM control and status is available through the CPM2 internal + * memory map. See immap_cpm2.h for details. + */ +#ifdef __KERNEL__ +#ifndef __CPM2__ +#define __CPM2__ + +#include <asm/immap_cpm2.h> +#include <asm/cpm.h> +#include <sysdev/fsl_soc.h> + +/* CPM Command register. +*/ +#define CPM_CR_RST ((uint)0x80000000) +#define CPM_CR_PAGE ((uint)0x7c000000) +#define CPM_CR_SBLOCK ((uint)0x03e00000) +#define CPM_CR_FLG ((uint)0x00010000) +#define CPM_CR_MCN ((uint)0x00003fc0) +#define CPM_CR_OPCODE ((uint)0x0000000f) + +/* Device sub-block and page codes. +*/ +#define CPM_CR_SCC1_SBLOCK (0x04) +#define CPM_CR_SCC2_SBLOCK (0x05) +#define CPM_CR_SCC3_SBLOCK (0x06) +#define CPM_CR_SCC4_SBLOCK (0x07) +#define CPM_CR_SMC1_SBLOCK (0x08) +#define CPM_CR_SMC2_SBLOCK (0x09) +#define CPM_CR_SPI_SBLOCK (0x0a) +#define CPM_CR_I2C_SBLOCK (0x0b) +#define CPM_CR_TIMER_SBLOCK (0x0f) +#define CPM_CR_RAND_SBLOCK (0x0e) +#define CPM_CR_FCC1_SBLOCK (0x10) +#define CPM_CR_FCC2_SBLOCK (0x11) +#define CPM_CR_FCC3_SBLOCK (0x12) +#define CPM_CR_IDMA1_SBLOCK (0x14) +#define CPM_CR_IDMA2_SBLOCK (0x15) +#define CPM_CR_IDMA3_SBLOCK (0x16) +#define CPM_CR_IDMA4_SBLOCK (0x17) +#define CPM_CR_MCC1_SBLOCK (0x1c) + +#define CPM_CR_FCC_SBLOCK(x) (x + 0x10) + +#define CPM_CR_SCC1_PAGE (0x00) +#define CPM_CR_SCC2_PAGE (0x01) +#define CPM_CR_SCC3_PAGE (0x02) +#define CPM_CR_SCC4_PAGE (0x03) +#define CPM_CR_SMC1_PAGE (0x07) +#define CPM_CR_SMC2_PAGE (0x08) +#define CPM_CR_SPI_PAGE (0x09) +#define CPM_CR_I2C_PAGE (0x0a) +#define CPM_CR_TIMER_PAGE (0x0a) +#define CPM_CR_RAND_PAGE (0x0a) +#define CPM_CR_FCC1_PAGE (0x04) +#define CPM_CR_FCC2_PAGE (0x05) +#define CPM_CR_FCC3_PAGE (0x06) +#define CPM_CR_IDMA1_PAGE (0x07) +#define CPM_CR_IDMA2_PAGE (0x08) +#define CPM_CR_IDMA3_PAGE (0x09) +#define CPM_CR_IDMA4_PAGE (0x0a) +#define CPM_CR_MCC1_PAGE (0x07) +#define CPM_CR_MCC2_PAGE (0x08) + +#define CPM_CR_FCC_PAGE(x) (x + 0x04) + +/* CPM2-specific opcodes (see cpm.h for common opcodes) +*/ +#define CPM_CR_START_IDMA ((ushort)0x0009) + +#define mk_cr_cmd(PG, SBC, MCN, OP) \ + ((PG << 26) | (SBC << 21) | (MCN << 6) | OP) + +/* The number of pages of host memory we allocate for CPM. This is + * done early in kernel initialization to get physically contiguous + * pages. + */ +#define NUM_CPM_HOST_PAGES 2 + +/* Export the base address of the communication processor registers + * and dual port ram. + */ +extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */ + +#define cpm_dpalloc cpm_muram_alloc +#define cpm_dpfree cpm_muram_free +#define cpm_dpram_addr cpm_muram_addr + +extern void cpm2_reset(void); + +/* Baud rate generators. +*/ +#define CPM_BRG_RST ((uint)0x00020000) +#define CPM_BRG_EN ((uint)0x00010000) +#define CPM_BRG_EXTC_INT ((uint)0x00000000) +#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000) +#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000) +#define CPM_BRG_ATB ((uint)0x00002000) +#define CPM_BRG_CD_MASK ((uint)0x00001ffe) +#define CPM_BRG_DIV16 ((uint)0x00000001) + +#define CPM2_BRG_INT_CLK (get_brgfreq()) +#define CPM2_BRG_UART_CLK (CPM2_BRG_INT_CLK/16) + +extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src); + +/* This function is used by UARTS, or anything else that uses a 16x + * oversampled clock. + */ +static inline void cpm_setbrg(uint brg, uint rate) +{ + __cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT); +} + +/* This function is used to set high speed synchronous baud rate + * clocks. + */ +static inline void cpm2_fastbrg(uint brg, uint rate, int div16) +{ + __cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT); +} + +/* Parameter RAM offsets from the base. +*/ +#define PROFF_SCC1 ((uint)0x8000) +#define PROFF_SCC2 ((uint)0x8100) +#define PROFF_SCC3 ((uint)0x8200) +#define PROFF_SCC4 ((uint)0x8300) +#define PROFF_FCC1 ((uint)0x8400) +#define PROFF_FCC2 ((uint)0x8500) +#define PROFF_FCC3 ((uint)0x8600) +#define PROFF_MCC1 ((uint)0x8700) +#define PROFF_SMC1_BASE ((uint)0x87fc) +#define PROFF_IDMA1_BASE ((uint)0x87fe) +#define PROFF_MCC2 ((uint)0x8800) +#define PROFF_SMC2_BASE ((uint)0x88fc) +#define PROFF_IDMA2_BASE ((uint)0x88fe) +#define PROFF_SPI_BASE ((uint)0x89fc) +#define PROFF_IDMA3_BASE ((uint)0x89fe) +#define PROFF_TIMERS ((uint)0x8ae0) +#define PROFF_REVNUM ((uint)0x8af0) +#define PROFF_RAND ((uint)0x8af8) +#define PROFF_I2C_BASE ((uint)0x8afc) +#define PROFF_IDMA4_BASE ((uint)0x8afe) + +#define PROFF_SCC_SIZE ((uint)0x100) +#define PROFF_FCC_SIZE ((uint)0x100) +#define PROFF_SMC_SIZE ((uint)64) + +/* The SMCs are relocated to any of the first eight DPRAM pages. + * We will fix these at the first locations of DPRAM, until we + * get some microcode patches :-). + * The parameter ram space for the SMCs is fifty-some bytes, and + * they are required to start on a 64 byte boundary. + */ +#define PROFF_SMC1 (0) +#define PROFF_SMC2 (64) + + +/* Define enough so I can at least use the serial port as a UART. + */ +typedef struct smc_uart { + ushort smc_rbase; /* Rx Buffer descriptor base address */ + ushort smc_tbase; /* Tx Buffer descriptor base address */ + u_char smc_rfcr; /* Rx function code */ + u_char smc_tfcr; /* Tx function code */ + ushort smc_mrblr; /* Max receive buffer length */ + uint smc_rstate; /* Internal */ + uint smc_idp; /* Internal */ + ushort smc_rbptr; /* Internal */ + ushort smc_ibc; /* Internal */ + uint smc_rxtmp; /* Internal */ + uint smc_tstate; /* Internal */ + uint smc_tdp; /* Internal */ + ushort smc_tbptr; /* Internal */ + ushort smc_tbc; /* Internal */ + uint smc_txtmp; /* Internal */ + ushort smc_maxidl; /* Maximum idle characters */ + ushort smc_tmpidl; /* Temporary idle counter */ + ushort smc_brklen; /* Last received break length */ + ushort smc_brkec; /* rcv'd break condition counter */ + ushort smc_brkcr; /* xmt break count register */ + ushort smc_rmask; /* Temporary bit mask */ + uint smc_stmp; /* SDMA Temp */ +} smc_uart_t; + +/* SMC uart mode register (Internal memory map). +*/ +#define SMCMR_REN ((ushort)0x0001) +#define SMCMR_TEN ((ushort)0x0002) +#define SMCMR_DM ((ushort)0x000c) +#define SMCMR_SM_GCI ((ushort)0x0000) +#define SMCMR_SM_UART ((ushort)0x0020) +#define SMCMR_SM_TRANS ((ushort)0x0030) +#define SMCMR_SM_MASK ((ushort)0x0030) +#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ +#define SMCMR_REVD SMCMR_PM_EVEN +#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ +#define SMCMR_BS SMCMR_PEN +#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ +#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ +#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) + +/* SMC Event and Mask register. +*/ +#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ +#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ +#define SMCM_TXE ((unsigned char)0x10) +#define SMCM_BSY ((unsigned char)0x04) +#define SMCM_TX ((unsigned char)0x02) +#define SMCM_RX ((unsigned char)0x01) + +/* SCCs. +*/ +#define SCC_GSMRH_IRP ((uint)0x00040000) +#define SCC_GSMRH_GDE ((uint)0x00010000) +#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) +#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) +#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) +#define SCC_GSMRH_REVD ((uint)0x00002000) +#define SCC_GSMRH_TRX ((uint)0x00001000) +#define SCC_GSMRH_TTX ((uint)0x00000800) +#define SCC_GSMRH_CDP ((uint)0x00000400) +#define SCC_GSMRH_CTSP ((uint)0x00000200) +#define SCC_GSMRH_CDS ((uint)0x00000100) +#define SCC_GSMRH_CTSS ((uint)0x00000080) +#define SCC_GSMRH_TFL ((uint)0x00000040) +#define SCC_GSMRH_RFW ((uint)0x00000020) +#define SCC_GSMRH_TXSY ((uint)0x00000010) +#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) +#define SCC_GSMRH_SYNL8 ((uint)0x00000008) +#define SCC_GSMRH_SYNL4 ((uint)0x00000004) +#define SCC_GSMRH_RTSM ((uint)0x00000002) +#define SCC_GSMRH_RSYN ((uint)0x00000001) + +#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ +#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) +#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) +#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) +#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) +#define SCC_GSMRL_TCI ((uint)0x10000000) +#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) +#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) +#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) +#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) +#define SCC_GSMRL_RINV ((uint)0x02000000) +#define SCC_GSMRL_TINV ((uint)0x01000000) +#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) +#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) +#define SCC_GSMRL_TPL_48 ((uint)0x00800000) +#define SCC_GSMRL_TPL_32 ((uint)0x00600000) +#define SCC_GSMRL_TPL_16 ((uint)0x00400000) +#define SCC_GSMRL_TPL_8 ((uint)0x00200000) +#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) +#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) +#define SCC_GSMRL_TPP_01 ((uint)0x00100000) +#define SCC_GSMRL_TPP_10 ((uint)0x00080000) +#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) +#define SCC_GSMRL_TEND ((uint)0x00040000) +#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) +#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) +#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) +#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) +#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) +#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) +#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) +#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) +#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) +#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) +#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) +#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) +#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) +#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) +#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) +#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) +#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ +#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) +#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) +#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) +#define SCC_GSMRL_ENR ((uint)0x00000020) +#define SCC_GSMRL_ENT ((uint)0x00000010) +#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) +#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) +#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) +#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) +#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) +#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) +#define SCC_GSMRL_MODE_UART ((uint)0x00000004) +#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) +#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) +#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) + +#define SCC_TODR_TOD ((ushort)0x8000) + +/* SCC Event and Mask register. +*/ +#define SCCM_TXE ((unsigned char)0x10) +#define SCCM_BSY ((unsigned char)0x04) +#define SCCM_TX ((unsigned char)0x02) +#define SCCM_RX ((unsigned char)0x01) + +typedef struct scc_param { + ushort scc_rbase; /* Rx Buffer descriptor base address */ + ushort scc_tbase; /* Tx Buffer descriptor base address */ + u_char scc_rfcr; /* Rx function code */ + u_char scc_tfcr; /* Tx function code */ + ushort scc_mrblr; /* Max receive buffer length */ + uint scc_rstate; /* Internal */ + uint scc_idp; /* Internal */ + ushort scc_rbptr; /* Internal */ + ushort scc_ibc; /* Internal */ + uint scc_rxtmp; /* Internal */ + uint scc_tstate; /* Internal */ + uint scc_tdp; /* Internal */ + ushort scc_tbptr; /* Internal */ + ushort scc_tbc; /* Internal */ + uint scc_txtmp; /* Internal */ + uint scc_rcrc; /* Internal */ + uint scc_tcrc; /* Internal */ +} sccp_t; + +/* Function code bits. +*/ +#define SCC_EB ((u_char) 0x10) /* Set big endian byte order */ +#define SCC_GBL ((u_char) 0x20) /* Snooping enabled */ + +/* CPM Ethernet through SCC1. + */ +typedef struct scc_enet { + sccp_t sen_genscc; + uint sen_cpres; /* Preset CRC */ + uint sen_cmask; /* Constant mask for CRC */ + uint sen_crcec; /* CRC Error counter */ + uint sen_alec; /* alignment error counter */ + uint sen_disfc; /* discard frame counter */ + ushort sen_pads; /* Tx short frame pad character */ + ushort sen_retlim; /* Retry limit threshold */ + ushort sen_retcnt; /* Retry limit counter */ + ushort sen_maxflr; /* maximum frame length register */ + ushort sen_minflr; /* minimum frame length register */ + ushort sen_maxd1; /* maximum DMA1 length */ + ushort sen_maxd2; /* maximum DMA2 length */ + ushort sen_maxd; /* Rx max DMA */ + ushort sen_dmacnt; /* Rx DMA counter */ + ushort sen_maxb; /* Max BD byte count */ + ushort sen_gaddr1; /* Group address filter */ + ushort sen_gaddr2; + ushort sen_gaddr3; + ushort sen_gaddr4; + uint sen_tbuf0data0; /* Save area 0 - current frame */ + uint sen_tbuf0data1; /* Save area 1 - current frame */ + uint sen_tbuf0rba; /* Internal */ + uint sen_tbuf0crc; /* Internal */ + ushort sen_tbuf0bcnt; /* Internal */ + ushort sen_paddrh; /* physical address (MSB) */ + ushort sen_paddrm; + ushort sen_paddrl; /* physical address (LSB) */ + ushort sen_pper; /* persistence */ + ushort sen_rfbdptr; /* Rx first BD pointer */ + ushort sen_tfbdptr; /* Tx first BD pointer */ + ushort sen_tlbdptr; /* Tx last BD pointer */ + uint sen_tbuf1data0; /* Save area 0 - current frame */ + uint sen_tbuf1data1; /* Save area 1 - current frame */ + uint sen_tbuf1rba; /* Internal */ + uint sen_tbuf1crc; /* Internal */ + ushort sen_tbuf1bcnt; /* Internal */ + ushort sen_txlen; /* Tx Frame length counter */ + ushort sen_iaddr1; /* Individual address filter */ + ushort sen_iaddr2; + ushort sen_iaddr3; + ushort sen_iaddr4; + ushort sen_boffcnt; /* Backoff counter */ + + /* NOTE: Some versions of the manual have the following items + * incorrectly documented. Below is the proper order. + */ + ushort sen_taddrh; /* temp address (MSB) */ + ushort sen_taddrm; + ushort sen_taddrl; /* temp address (LSB) */ +} scc_enet_t; + + +/* SCC Event register as used by Ethernet. +*/ +#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ +#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ +#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ +#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ +#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ +#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ + +/* SCC Mode Register (PSMR) as used by Ethernet. +*/ +#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ +#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ +#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ +#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ +#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ +#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ +#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ +#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ +#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ +#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ +#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ +#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ +#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ + +/* SCC as UART +*/ +typedef struct scc_uart { + sccp_t scc_genscc; + uint scc_res1; /* Reserved */ + uint scc_res2; /* Reserved */ + ushort scc_maxidl; /* Maximum idle chars */ + ushort scc_idlc; /* temp idle counter */ + ushort scc_brkcr; /* Break count register */ + ushort scc_parec; /* receive parity error counter */ + ushort scc_frmec; /* receive framing error counter */ + ushort scc_nosec; /* receive noise counter */ + ushort scc_brkec; /* receive break condition counter */ + ushort scc_brkln; /* last received break length */ + ushort scc_uaddr1; /* UART address character 1 */ + ushort scc_uaddr2; /* UART address character 2 */ + ushort scc_rtemp; /* Temp storage */ + ushort scc_toseq; /* Transmit out of sequence char */ + ushort scc_char1; /* control character 1 */ + ushort scc_char2; /* control character 2 */ + ushort scc_char3; /* control character 3 */ + ushort scc_char4; /* control character 4 */ + ushort scc_char5; /* control character 5 */ + ushort scc_char6; /* control character 6 */ + ushort scc_char7; /* control character 7 */ + ushort scc_char8; /* control character 8 */ + ushort scc_rccm; /* receive control character mask */ + ushort scc_rccr; /* receive control character register */ + ushort scc_rlbc; /* receive last break character */ +} scc_uart_t; + +/* SCC Event and Mask registers when it is used as a UART. +*/ +#define UART_SCCM_GLR ((ushort)0x1000) +#define UART_SCCM_GLT ((ushort)0x0800) +#define UART_SCCM_AB ((ushort)0x0200) +#define UART_SCCM_IDL ((ushort)0x0100) +#define UART_SCCM_GRA ((ushort)0x0080) +#define UART_SCCM_BRKE ((ushort)0x0040) +#define UART_SCCM_BRKS ((ushort)0x0020) +#define UART_SCCM_CCR ((ushort)0x0008) +#define UART_SCCM_BSY ((ushort)0x0004) +#define UART_SCCM_TX ((ushort)0x0002) +#define UART_SCCM_RX ((ushort)0x0001) + +/* The SCC PSMR when used as a UART. +*/ +#define SCU_PSMR_FLC ((ushort)0x8000) +#define SCU_PSMR_SL ((ushort)0x4000) +#define SCU_PSMR_CL ((ushort)0x3000) +#define SCU_PSMR_UM ((ushort)0x0c00) +#define SCU_PSMR_FRZ ((ushort)0x0200) +#define SCU_PSMR_RZS ((ushort)0x0100) +#define SCU_PSMR_SYN ((ushort)0x0080) +#define SCU_PSMR_DRT ((ushort)0x0040) +#define SCU_PSMR_PEN ((ushort)0x0010) +#define SCU_PSMR_RPM ((ushort)0x000c) +#define SCU_PSMR_REVP ((ushort)0x0008) +#define SCU_PSMR_TPM ((ushort)0x0003) +#define SCU_PSMR_TEVP ((ushort)0x0002) + +/* CPM Transparent mode SCC. + */ +typedef struct scc_trans { + sccp_t st_genscc; + uint st_cpres; /* Preset CRC */ + uint st_cmask; /* Constant mask for CRC */ +} scc_trans_t; + +/* How about some FCCs..... +*/ +#define FCC_GFMR_DIAG_NORM ((uint)0x00000000) +#define FCC_GFMR_DIAG_LE ((uint)0x40000000) +#define FCC_GFMR_DIAG_AE ((uint)0x80000000) +#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000) +#define FCC_GFMR_TCI ((uint)0x20000000) +#define FCC_GFMR_TRX ((uint)0x10000000) +#define FCC_GFMR_TTX ((uint)0x08000000) +#define FCC_GFMR_CDP ((uint)0x04000000) +#define FCC_GFMR_CTSP ((uint)0x02000000) +#define FCC_GFMR_CDS ((uint)0x01000000) +#define FCC_GFMR_CTSS ((uint)0x00800000) +#define FCC_GFMR_SYNL_NONE ((uint)0x00000000) +#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000) +#define FCC_GFMR_SYNL_8 ((uint)0x00008000) +#define FCC_GFMR_SYNL_16 ((uint)0x0000c000) +#define FCC_GFMR_RTSM ((uint)0x00002000) +#define FCC_GFMR_RENC_NRZ ((uint)0x00000000) +#define FCC_GFMR_RENC_NRZI ((uint)0x00000800) +#define FCC_GFMR_REVD ((uint)0x00000400) +#define FCC_GFMR_TENC_NRZ ((uint)0x00000000) +#define FCC_GFMR_TENC_NRZI ((uint)0x00000100) +#define FCC_GFMR_TCRC_16 ((uint)0x00000000) +#define FCC_GFMR_TCRC_32 ((uint)0x00000080) +#define FCC_GFMR_ENR ((uint)0x00000020) +#define FCC_GFMR_ENT ((uint)0x00000010) +#define FCC_GFMR_MODE_ENET ((uint)0x0000000c) +#define FCC_GFMR_MODE_ATM ((uint)0x0000000a) +#define FCC_GFMR_MODE_HDLC ((uint)0x00000000) + +/* Generic FCC parameter ram. +*/ +typedef struct fcc_param { + ushort fcc_riptr; /* Rx Internal temp pointer */ + ushort fcc_tiptr; /* Tx Internal temp pointer */ + ushort fcc_res1; + ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */ + uint fcc_rstate; /* Upper byte is Func code, must be set */ + uint fcc_rbase; /* Receive BD base */ + ushort fcc_rbdstat; /* RxBD status */ + ushort fcc_rbdlen; /* RxBD down counter */ + uint fcc_rdptr; /* RxBD internal data pointer */ + uint fcc_tstate; /* Upper byte is Func code, must be set */ + uint fcc_tbase; /* Transmit BD base */ + ushort fcc_tbdstat; /* TxBD status */ + ushort fcc_tbdlen; /* TxBD down counter */ + uint fcc_tdptr; /* TxBD internal data pointer */ + uint fcc_rbptr; /* Rx BD Internal buf pointer */ + uint fcc_tbptr; /* Tx BD Internal buf pointer */ + uint fcc_rcrc; /* Rx temp CRC */ + uint fcc_res2; + uint fcc_tcrc; /* Tx temp CRC */ +} fccp_t; + + +/* Ethernet controller through FCC. +*/ +typedef struct fcc_enet { + fccp_t fen_genfcc; + uint fen_statbuf; /* Internal status buffer */ + uint fen_camptr; /* CAM address */ + uint fen_cmask; /* Constant mask for CRC */ + uint fen_cpres; /* Preset CRC */ + uint fen_crcec; /* CRC Error counter */ + uint fen_alec; /* alignment error counter */ + uint fen_disfc; /* discard frame counter */ + ushort fen_retlim; /* Retry limit */ + ushort fen_retcnt; /* Retry counter */ + ushort fen_pper; /* Persistence */ + ushort fen_boffcnt; /* backoff counter */ + uint fen_gaddrh; /* Group address filter, high 32-bits */ + uint fen_gaddrl; /* Group address filter, low 32-bits */ + ushort fen_tfcstat; /* out of sequence TxBD */ + ushort fen_tfclen; + uint fen_tfcptr; + ushort fen_mflr; /* Maximum frame length (1518) */ + ushort fen_paddrh; /* MAC address */ + ushort fen_paddrm; + ushort fen_paddrl; + ushort fen_ibdcount; /* Internal BD counter */ + ushort fen_ibdstart; /* Internal BD start pointer */ + ushort fen_ibdend; /* Internal BD end pointer */ + ushort fen_txlen; /* Internal Tx frame length counter */ + uint fen_ibdbase[8]; /* Internal use */ + uint fen_iaddrh; /* Individual address filter */ + uint fen_iaddrl; + ushort fen_minflr; /* Minimum frame length (64) */ + ushort fen_taddrh; /* Filter transfer MAC address */ + ushort fen_taddrm; + ushort fen_taddrl; + ushort fen_padptr; /* Pointer to pad byte buffer */ + ushort fen_cftype; /* control frame type */ + ushort fen_cfrange; /* control frame range */ + ushort fen_maxb; /* maximum BD count */ + ushort fen_maxd1; /* Max DMA1 length (1520) */ + ushort fen_maxd2; /* Max DMA2 length (1520) */ + ushort fen_maxd; /* internal max DMA count */ + ushort fen_dmacnt; /* internal DMA counter */ + uint fen_octc; /* Total octect counter */ + uint fen_colc; /* Total collision counter */ + uint fen_broc; /* Total broadcast packet counter */ + uint fen_mulc; /* Total multicast packet count */ + uint fen_uspc; /* Total packets < 64 bytes */ + uint fen_frgc; /* Total packets < 64 bytes with errors */ + uint fen_ospc; /* Total packets > 1518 */ + uint fen_jbrc; /* Total packets > 1518 with errors */ + uint fen_p64c; /* Total packets == 64 bytes */ + uint fen_p65c; /* Total packets 64 < bytes <= 127 */ + uint fen_p128c; /* Total packets 127 < bytes <= 255 */ + uint fen_p256c; /* Total packets 256 < bytes <= 511 */ + uint fen_p512c; /* Total packets 512 < bytes <= 1023 */ + uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */ + uint fen_cambuf; /* Internal CAM buffer poiner */ + ushort fen_rfthr; /* Received frames threshold */ + ushort fen_rfcnt; /* Received frames count */ +} fcc_enet_t; + +/* FCC Event/Mask register as used by Ethernet. +*/ +#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ +#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */ +#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */ +#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */ +#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */ +#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */ +#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ +#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */ + +/* FCC Mode Register (FPSMR) as used by Ethernet. +*/ +#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */ +#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */ +#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */ +#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */ +#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */ +#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */ +#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */ +#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */ +#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */ +#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */ +#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */ +#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */ +#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */ + +/* IIC parameter RAM. +*/ +typedef struct iic { + ushort iic_rbase; /* Rx Buffer descriptor base address */ + ushort iic_tbase; /* Tx Buffer descriptor base address */ + u_char iic_rfcr; /* Rx function code */ + u_char iic_tfcr; /* Tx function code */ + ushort iic_mrblr; /* Max receive buffer length */ + uint iic_rstate; /* Internal */ + uint iic_rdp; /* Internal */ + ushort iic_rbptr; /* Internal */ + ushort iic_rbc; /* Internal */ + uint iic_rxtmp; /* Internal */ + uint iic_tstate; /* Internal */ + uint iic_tdp; /* Internal */ + ushort iic_tbptr; /* Internal */ + ushort iic_tbc; /* Internal */ + uint iic_txtmp; /* Internal */ +} iic_t; + +/* IDMA parameter RAM +*/ +typedef struct idma { + ushort ibase; /* IDMA buffer descriptor table base address */ + ushort dcm; /* DMA channel mode */ + ushort ibdptr; /* IDMA current buffer descriptor pointer */ + ushort dpr_buf; /* IDMA transfer buffer base address */ + ushort buf_inv; /* internal buffer inventory */ + ushort ss_max; /* steady-state maximum transfer size */ + ushort dpr_in_ptr; /* write pointer inside the internal buffer */ + ushort sts; /* source transfer size */ + ushort dpr_out_ptr; /* read pointer inside the internal buffer */ + ushort seob; /* source end of burst */ + ushort deob; /* destination end of burst */ + ushort dts; /* destination transfer size */ + ushort ret_add; /* return address when working in ERM=1 mode */ + ushort res0; /* reserved */ + uint bd_cnt; /* internal byte count */ + uint s_ptr; /* source internal data pointer */ + uint d_ptr; /* destination internal data pointer */ + uint istate; /* internal state */ + u_char res1[20]; /* pad to 64-byte length */ +} idma_t; + +/* DMA channel mode bit fields +*/ +#define IDMA_DCM_FB ((ushort)0x8000) /* fly-by mode */ +#define IDMA_DCM_LP ((ushort)0x4000) /* low priority */ +#define IDMA_DCM_TC2 ((ushort)0x0400) /* value driven on TC[2] */ +#define IDMA_DCM_DMA_WRAP_MASK ((ushort)0x01c0) /* mask for DMA wrap */ +#define IDMA_DCM_DMA_WRAP_64 ((ushort)0x0000) /* 64-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_128 ((ushort)0x0040) /* 128-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_256 ((ushort)0x0080) /* 256-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_512 ((ushort)0x00c0) /* 512-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_1024 ((ushort)0x0100) /* 1024-byte DMA xfer buffer */ +#define IDMA_DCM_DMA_WRAP_2048 ((ushort)0x0140) /* 2048-byte DMA xfer buffer */ +#define IDMA_DCM_SINC ((ushort)0x0020) /* source inc addr */ +#define IDMA_DCM_DINC ((ushort)0x0010) /* destination inc addr */ +#define IDMA_DCM_ERM ((ushort)0x0008) /* external request mode */ +#define IDMA_DCM_DT ((ushort)0x0004) /* DONE treatment */ +#define IDMA_DCM_SD_MASK ((ushort)0x0003) /* mask for SD bit field */ +#define IDMA_DCM_SD_MEM2MEM ((ushort)0x0000) /* memory-to-memory xfer */ +#define IDMA_DCM_SD_PER2MEM ((ushort)0x0002) /* peripheral-to-memory xfer */ +#define IDMA_DCM_SD_MEM2PER ((ushort)0x0001) /* memory-to-peripheral xfer */ + +/* IDMA Buffer Descriptors +*/ +typedef struct idma_bd { + uint flags; + uint len; /* data length */ + uint src; /* source data buffer pointer */ + uint dst; /* destination data buffer pointer */ +} idma_bd_t; + +/* IDMA buffer descriptor flag bit fields +*/ +#define IDMA_BD_V ((uint)0x80000000) /* valid */ +#define IDMA_BD_W ((uint)0x20000000) /* wrap */ +#define IDMA_BD_I ((uint)0x10000000) /* interrupt */ +#define IDMA_BD_L ((uint)0x08000000) /* last */ +#define IDMA_BD_CM ((uint)0x02000000) /* continuous mode */ +#define IDMA_BD_SDN ((uint)0x00400000) /* source done */ +#define IDMA_BD_DDN ((uint)0x00200000) /* destination done */ +#define IDMA_BD_DGBL ((uint)0x00100000) /* destination global */ +#define IDMA_BD_DBO_LE ((uint)0x00040000) /* little-end dest byte order */ +#define IDMA_BD_DBO_BE ((uint)0x00080000) /* big-end dest byte order */ +#define IDMA_BD_DDTB ((uint)0x00010000) /* destination data bus */ +#define IDMA_BD_SGBL ((uint)0x00002000) /* source global */ +#define IDMA_BD_SBO_LE ((uint)0x00000800) /* little-end src byte order */ +#define IDMA_BD_SBO_BE ((uint)0x00001000) /* big-end src byte order */ +#define IDMA_BD_SDTB ((uint)0x00000200) /* source data bus */ + +/* per-channel IDMA registers +*/ +typedef struct im_idma { + u_char idsr; /* IDMAn event status register */ + u_char res0[3]; + u_char idmr; /* IDMAn event mask register */ + u_char res1[3]; +} im_idma_t; + +/* IDMA event register bit fields +*/ +#define IDMA_EVENT_SC ((unsigned char)0x08) /* stop completed */ +#define IDMA_EVENT_OB ((unsigned char)0x04) /* out of buffers */ +#define IDMA_EVENT_EDN ((unsigned char)0x02) /* external DONE asserted */ +#define IDMA_EVENT_BC ((unsigned char)0x01) /* buffer descriptor complete */ + +/* RISC Controller Configuration Register (RCCR) bit fields +*/ +#define RCCR_TIME ((uint)0x80000000) /* timer enable */ +#define RCCR_TIMEP_MASK ((uint)0x3f000000) /* mask for timer period bit field */ +#define RCCR_DR0M ((uint)0x00800000) /* IDMA0 request mode */ +#define RCCR_DR1M ((uint)0x00400000) /* IDMA1 request mode */ +#define RCCR_DR2M ((uint)0x00000080) /* IDMA2 request mode */ +#define RCCR_DR3M ((uint)0x00000040) /* IDMA3 request mode */ +#define RCCR_DR0QP_MASK ((uint)0x00300000) /* mask for IDMA0 req priority */ +#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */ +#define RCCR_DR0QP_MED ((uint)0x00100000) /* IDMA0 has medium req priority */ +#define RCCR_DR0QP_LOW ((uint)0x00200000) /* IDMA0 has low req priority */ +#define RCCR_DR1QP_MASK ((uint)0x00030000) /* mask for IDMA1 req priority */ +#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */ +#define RCCR_DR1QP_MED ((uint)0x00010000) /* IDMA1 has medium req priority */ +#define RCCR_DR1QP_LOW ((uint)0x00020000) /* IDMA1 has low req priority */ +#define RCCR_DR2QP_MASK ((uint)0x00000030) /* mask for IDMA2 req priority */ +#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */ +#define RCCR_DR2QP_MED ((uint)0x00000010) /* IDMA2 has medium req priority */ +#define RCCR_DR2QP_LOW ((uint)0x00000020) /* IDMA2 has low req priority */ +#define RCCR_DR3QP_MASK ((uint)0x00000003) /* mask for IDMA3 req priority */ +#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */ +#define RCCR_DR3QP_MED ((uint)0x00000001) /* IDMA3 has medium req priority */ +#define RCCR_DR3QP_LOW ((uint)0x00000002) /* IDMA3 has low req priority */ +#define RCCR_EIE ((uint)0x00080000) /* external interrupt enable */ +#define RCCR_SCD ((uint)0x00040000) /* scheduler configuration */ +#define RCCR_ERAM_MASK ((uint)0x0000e000) /* mask for enable RAM microcode */ +#define RCCR_ERAM_0KB ((uint)0x00000000) /* use 0KB of dpram for microcode */ +#define RCCR_ERAM_2KB ((uint)0x00002000) /* use 2KB of dpram for microcode */ +#define RCCR_ERAM_4KB ((uint)0x00004000) /* use 4KB of dpram for microcode */ +#define RCCR_ERAM_6KB ((uint)0x00006000) /* use 6KB of dpram for microcode */ +#define RCCR_ERAM_8KB ((uint)0x00008000) /* use 8KB of dpram for microcode */ +#define RCCR_ERAM_10KB ((uint)0x0000a000) /* use 10KB of dpram for microcode */ +#define RCCR_ERAM_12KB ((uint)0x0000c000) /* use 12KB of dpram for microcode */ +#define RCCR_EDM0 ((uint)0x00000800) /* DREQ0 edge detect mode */ +#define RCCR_EDM1 ((uint)0x00000400) /* DREQ1 edge detect mode */ +#define RCCR_EDM2 ((uint)0x00000200) /* DREQ2 edge detect mode */ +#define RCCR_EDM3 ((uint)0x00000100) /* DREQ3 edge detect mode */ +#define RCCR_DEM01 ((uint)0x00000008) /* DONE0/DONE1 edge detect mode */ +#define RCCR_DEM23 ((uint)0x00000004) /* DONE2/DONE3 edge detect mode */ + +/*----------------------------------------------------------------------- + * CMXFCR - CMX FCC Clock Route Register + */ +#define CMXFCR_FC1 0x40000000 /* FCC1 connection */ +#define CMXFCR_RF1CS_MSK 0x38000000 /* Receive FCC1 Clock Source Mask */ +#define CMXFCR_TF1CS_MSK 0x07000000 /* Transmit FCC1 Clock Source Mask */ +#define CMXFCR_FC2 0x00400000 /* FCC2 connection */ +#define CMXFCR_RF2CS_MSK 0x00380000 /* Receive FCC2 Clock Source Mask */ +#define CMXFCR_TF2CS_MSK 0x00070000 /* Transmit FCC2 Clock Source Mask */ +#define CMXFCR_FC3 0x00004000 /* FCC3 connection */ +#define CMXFCR_RF3CS_MSK 0x00003800 /* Receive FCC3 Clock Source Mask */ +#define CMXFCR_TF3CS_MSK 0x00000700 /* Transmit FCC3 Clock Source Mask */ + +#define CMXFCR_RF1CS_BRG5 0x00000000 /* Receive FCC1 Clock Source is BRG5 */ +#define CMXFCR_RF1CS_BRG6 0x08000000 /* Receive FCC1 Clock Source is BRG6 */ +#define CMXFCR_RF1CS_BRG7 0x10000000 /* Receive FCC1 Clock Source is BRG7 */ +#define CMXFCR_RF1CS_BRG8 0x18000000 /* Receive FCC1 Clock Source is BRG8 */ +#define CMXFCR_RF1CS_CLK9 0x20000000 /* Receive FCC1 Clock Source is CLK9 */ +#define CMXFCR_RF1CS_CLK10 0x28000000 /* Receive FCC1 Clock Source is CLK10 */ +#define CMXFCR_RF1CS_CLK11 0x30000000 /* Receive FCC1 Clock Source is CLK11 */ +#define CMXFCR_RF1CS_CLK12 0x38000000 /* Receive FCC1 Clock Source is CLK12 */ + +#define CMXFCR_TF1CS_BRG5 0x00000000 /* Transmit FCC1 Clock Source is BRG5 */ +#define CMXFCR_TF1CS_BRG6 0x01000000 /* Transmit FCC1 Clock Source is BRG6 */ +#define CMXFCR_TF1CS_BRG7 0x02000000 /* Transmit FCC1 Clock Source is BRG7 */ +#define CMXFCR_TF1CS_BRG8 0x03000000 /* Transmit FCC1 Clock Source is BRG8 */ +#define CMXFCR_TF1CS_CLK9 0x04000000 /* Transmit FCC1 Clock Source is CLK9 */ +#define CMXFCR_TF1CS_CLK10 0x05000000 /* Transmit FCC1 Clock Source is CLK10 */ +#define CMXFCR_TF1CS_CLK11 0x06000000 /* Transmit FCC1 Clock Source is CLK11 */ +#define CMXFCR_TF1CS_CLK12 0x07000000 /* Transmit FCC1 Clock Source is CLK12 */ + +#define CMXFCR_RF2CS_BRG5 0x00000000 /* Receive FCC2 Clock Source is BRG5 */ +#define CMXFCR_RF2CS_BRG6 0x00080000 /* Receive FCC2 Clock Source is BRG6 */ +#define CMXFCR_RF2CS_BRG7 0x00100000 /* Receive FCC2 Clock Source is BRG7 */ +#define CMXFCR_RF2CS_BRG8 0x00180000 /* Receive FCC2 Clock Source is BRG8 */ +#define CMXFCR_RF2CS_CLK13 0x00200000 /* Receive FCC2 Clock Source is CLK13 */ +#define CMXFCR_RF2CS_CLK14 0x00280000 /* Receive FCC2 Clock Source is CLK14 */ +#define CMXFCR_RF2CS_CLK15 0x00300000 /* Receive FCC2 Clock Source is CLK15 */ +#define CMXFCR_RF2CS_CLK16 0x00380000 /* Receive FCC2 Clock Source is CLK16 */ + +#define CMXFCR_TF2CS_BRG5 0x00000000 /* Transmit FCC2 Clock Source is BRG5 */ +#define CMXFCR_TF2CS_BRG6 0x00010000 /* Transmit FCC2 Clock Source is BRG6 */ +#define CMXFCR_TF2CS_BRG7 0x00020000 /* Transmit FCC2 Clock Source is BRG7 */ +#define CMXFCR_TF2CS_BRG8 0x00030000 /* Transmit FCC2 Clock Source is BRG8 */ +#define CMXFCR_TF2CS_CLK13 0x00040000 /* Transmit FCC2 Clock Source is CLK13 */ +#define CMXFCR_TF2CS_CLK14 0x00050000 /* Transmit FCC2 Clock Source is CLK14 */ +#define CMXFCR_TF2CS_CLK15 0x00060000 /* Transmit FCC2 Clock Source is CLK15 */ +#define CMXFCR_TF2CS_CLK16 0x00070000 /* Transmit FCC2 Clock Source is CLK16 */ + +#define CMXFCR_RF3CS_BRG5 0x00000000 /* Receive FCC3 Clock Source is BRG5 */ +#define CMXFCR_RF3CS_BRG6 0x00000800 /* Receive FCC3 Clock Source is BRG6 */ +#define CMXFCR_RF3CS_BRG7 0x00001000 /* Receive FCC3 Clock Source is BRG7 */ +#define CMXFCR_RF3CS_BRG8 0x00001800 /* Receive FCC3 Clock Source is BRG8 */ +#define CMXFCR_RF3CS_CLK13 0x00002000 /* Receive FCC3 Clock Source is CLK13 */ +#define CMXFCR_RF3CS_CLK14 0x00002800 /* Receive FCC3 Clock Source is CLK14 */ +#define CMXFCR_RF3CS_CLK15 0x00003000 /* Receive FCC3 Clock Source is CLK15 */ +#define CMXFCR_RF3CS_CLK16 0x00003800 /* Receive FCC3 Clock Source is CLK16 */ + +#define CMXFCR_TF3CS_BRG5 0x00000000 /* Transmit FCC3 Clock Source is BRG5 */ +#define CMXFCR_TF3CS_BRG6 0x00000100 /* Transmit FCC3 Clock Source is BRG6 */ +#define CMXFCR_TF3CS_BRG7 0x00000200 /* Transmit FCC3 Clock Source is BRG7 */ +#define CMXFCR_TF3CS_BRG8 0x00000300 /* Transmit FCC3 Clock Source is BRG8 */ +#define CMXFCR_TF3CS_CLK13 0x00000400 /* Transmit FCC3 Clock Source is CLK13 */ +#define CMXFCR_TF3CS_CLK14 0x00000500 /* Transmit FCC3 Clock Source is CLK14 */ +#define CMXFCR_TF3CS_CLK15 0x00000600 /* Transmit FCC3 Clock Source is CLK15 */ +#define CMXFCR_TF3CS_CLK16 0x00000700 /* Transmit FCC3 Clock Source is CLK16 */ + +/*----------------------------------------------------------------------- + * CMXSCR - CMX SCC Clock Route Register + */ +#define CMXSCR_GR1 0x80000000 /* Grant Support of SCC1 */ +#define CMXSCR_SC1 0x40000000 /* SCC1 connection */ +#define CMXSCR_RS1CS_MSK 0x38000000 /* Receive SCC1 Clock Source Mask */ +#define CMXSCR_TS1CS_MSK 0x07000000 /* Transmit SCC1 Clock Source Mask */ +#define CMXSCR_GR2 0x00800000 /* Grant Support of SCC2 */ +#define CMXSCR_SC2 0x00400000 /* SCC2 connection */ +#define CMXSCR_RS2CS_MSK 0x00380000 /* Receive SCC2 Clock Source Mask */ +#define CMXSCR_TS2CS_MSK 0x00070000 /* Transmit SCC2 Clock Source Mask */ +#define CMXSCR_GR3 0x00008000 /* Grant Support of SCC3 */ +#define CMXSCR_SC3 0x00004000 /* SCC3 connection */ +#define CMXSCR_RS3CS_MSK 0x00003800 /* Receive SCC3 Clock Source Mask */ +#define CMXSCR_TS3CS_MSK 0x00000700 /* Transmit SCC3 Clock Source Mask */ +#define CMXSCR_GR4 0x00000080 /* Grant Support of SCC4 */ +#define CMXSCR_SC4 0x00000040 /* SCC4 connection */ +#define CMXSCR_RS4CS_MSK 0x00000038 /* Receive SCC4 Clock Source Mask */ +#define CMXSCR_TS4CS_MSK 0x00000007 /* Transmit SCC4 Clock Source Mask */ + +#define CMXSCR_RS1CS_BRG1 0x00000000 /* SCC1 Rx Clock Source is BRG1 */ +#define CMXSCR_RS1CS_BRG2 0x08000000 /* SCC1 Rx Clock Source is BRG2 */ +#define CMXSCR_RS1CS_BRG3 0x10000000 /* SCC1 Rx Clock Source is BRG3 */ +#define CMXSCR_RS1CS_BRG4 0x18000000 /* SCC1 Rx Clock Source is BRG4 */ +#define CMXSCR_RS1CS_CLK11 0x20000000 /* SCC1 Rx Clock Source is CLK11 */ +#define CMXSCR_RS1CS_CLK12 0x28000000 /* SCC1 Rx Clock Source is CLK12 */ +#define CMXSCR_RS1CS_CLK3 0x30000000 /* SCC1 Rx Clock Source is CLK3 */ +#define CMXSCR_RS1CS_CLK4 0x38000000 /* SCC1 Rx Clock Source is CLK4 */ + +#define CMXSCR_TS1CS_BRG1 0x00000000 /* SCC1 Tx Clock Source is BRG1 */ +#define CMXSCR_TS1CS_BRG2 0x01000000 /* SCC1 Tx Clock Source is BRG2 */ +#define CMXSCR_TS1CS_BRG3 0x02000000 /* SCC1 Tx Clock Source is BRG3 */ +#define CMXSCR_TS1CS_BRG4 0x03000000 /* SCC1 Tx Clock Source is BRG4 */ +#define CMXSCR_TS1CS_CLK11 0x04000000 /* SCC1 Tx Clock Source is CLK11 */ +#define CMXSCR_TS1CS_CLK12 0x05000000 /* SCC1 Tx Clock Source is CLK12 */ +#define CMXSCR_TS1CS_CLK3 0x06000000 /* SCC1 Tx Clock Source is CLK3 */ +#define CMXSCR_TS1CS_CLK4 0x07000000 /* SCC1 Tx Clock Source is CLK4 */ + +#define CMXSCR_RS2CS_BRG1 0x00000000 /* SCC2 Rx Clock Source is BRG1 */ +#define CMXSCR_RS2CS_BRG2 0x00080000 /* SCC2 Rx Clock Source is BRG2 */ +#define CMXSCR_RS2CS_BRG3 0x00100000 /* SCC2 Rx Clock Source is BRG3 */ +#define CMXSCR_RS2CS_BRG4 0x00180000 /* SCC2 Rx Clock Source is BRG4 */ +#define CMXSCR_RS2CS_CLK11 0x00200000 /* SCC2 Rx Clock Source is CLK11 */ +#define CMXSCR_RS2CS_CLK12 0x00280000 /* SCC2 Rx Clock Source is CLK12 */ +#define CMXSCR_RS2CS_CLK3 0x00300000 /* SCC2 Rx Clock Source is CLK3 */ +#define CMXSCR_RS2CS_CLK4 0x00380000 /* SCC2 Rx Clock Source is CLK4 */ + +#define CMXSCR_TS2CS_BRG1 0x00000000 /* SCC2 Tx Clock Source is BRG1 */ +#define CMXSCR_TS2CS_BRG2 0x00010000 /* SCC2 Tx Clock Source is BRG2 */ +#define CMXSCR_TS2CS_BRG3 0x00020000 /* SCC2 Tx Clock Source is BRG3 */ +#define CMXSCR_TS2CS_BRG4 0x00030000 /* SCC2 Tx Clock Source is BRG4 */ +#define CMXSCR_TS2CS_CLK11 0x00040000 /* SCC2 Tx Clock Source is CLK11 */ +#define CMXSCR_TS2CS_CLK12 0x00050000 /* SCC2 Tx Clock Source is CLK12 */ +#define CMXSCR_TS2CS_CLK3 0x00060000 /* SCC2 Tx Clock Source is CLK3 */ +#define CMXSCR_TS2CS_CLK4 0x00070000 /* SCC2 Tx Clock Source is CLK4 */ + +#define CMXSCR_RS3CS_BRG1 0x00000000 /* SCC3 Rx Clock Source is BRG1 */ +#define CMXSCR_RS3CS_BRG2 0x00000800 /* SCC3 Rx Clock Source is BRG2 */ +#define CMXSCR_RS3CS_BRG3 0x00001000 /* SCC3 Rx Clock Source is BRG3 */ +#define CMXSCR_RS3CS_BRG4 0x00001800 /* SCC3 Rx Clock Source is BRG4 */ +#define CMXSCR_RS3CS_CLK5 0x00002000 /* SCC3 Rx Clock Source is CLK5 */ +#define CMXSCR_RS3CS_CLK6 0x00002800 /* SCC3 Rx Clock Source is CLK6 */ +#define CMXSCR_RS3CS_CLK7 0x00003000 /* SCC3 Rx Clock Source is CLK7 */ +#define CMXSCR_RS3CS_CLK8 0x00003800 /* SCC3 Rx Clock Source is CLK8 */ + +#define CMXSCR_TS3CS_BRG1 0x00000000 /* SCC3 Tx Clock Source is BRG1 */ +#define CMXSCR_TS3CS_BRG2 0x00000100 /* SCC3 Tx Clock Source is BRG2 */ +#define CMXSCR_TS3CS_BRG3 0x00000200 /* SCC3 Tx Clock Source is BRG3 */ +#define CMXSCR_TS3CS_BRG4 0x00000300 /* SCC3 Tx Clock Source is BRG4 */ +#define CMXSCR_TS3CS_CLK5 0x00000400 /* SCC3 Tx Clock Source is CLK5 */ +#define CMXSCR_TS3CS_CLK6 0x00000500 /* SCC3 Tx Clock Source is CLK6 */ +#define CMXSCR_TS3CS_CLK7 0x00000600 /* SCC3 Tx Clock Source is CLK7 */ +#define CMXSCR_TS3CS_CLK8 0x00000700 /* SCC3 Tx Clock Source is CLK8 */ + +#define CMXSCR_RS4CS_BRG1 0x00000000 /* SCC4 Rx Clock Source is BRG1 */ +#define CMXSCR_RS4CS_BRG2 0x00000008 /* SCC4 Rx Clock Source is BRG2 */ +#define CMXSCR_RS4CS_BRG3 0x00000010 /* SCC4 Rx Clock Source is BRG3 */ +#define CMXSCR_RS4CS_BRG4 0x00000018 /* SCC4 Rx Clock Source is BRG4 */ +#define CMXSCR_RS4CS_CLK5 0x00000020 /* SCC4 Rx Clock Source is CLK5 */ +#define CMXSCR_RS4CS_CLK6 0x00000028 /* SCC4 Rx Clock Source is CLK6 */ +#define CMXSCR_RS4CS_CLK7 0x00000030 /* SCC4 Rx Clock Source is CLK7 */ +#define CMXSCR_RS4CS_CLK8 0x00000038 /* SCC4 Rx Clock Source is CLK8 */ + +#define CMXSCR_TS4CS_BRG1 0x00000000 /* SCC4 Tx Clock Source is BRG1 */ +#define CMXSCR_TS4CS_BRG2 0x00000001 /* SCC4 Tx Clock Source is BRG2 */ +#define CMXSCR_TS4CS_BRG3 0x00000002 /* SCC4 Tx Clock Source is BRG3 */ +#define CMXSCR_TS4CS_BRG4 0x00000003 /* SCC4 Tx Clock Source is BRG4 */ +#define CMXSCR_TS4CS_CLK5 0x00000004 /* SCC4 Tx Clock Source is CLK5 */ +#define CMXSCR_TS4CS_CLK6 0x00000005 /* SCC4 Tx Clock Source is CLK6 */ +#define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */ +#define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */ + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration Register 4-31 + */ +#define SIUMCR_BBD 0x80000000 /* Bus Busy Disable */ +#define SIUMCR_ESE 0x40000000 /* External Snoop Enable */ +#define SIUMCR_PBSE 0x20000000 /* Parity Byte Select Enable */ +#define SIUMCR_CDIS 0x10000000 /* Core Disable */ +#define SIUMCR_DPPC00 0x00000000 /* Data Parity Pins Configuration*/ +#define SIUMCR_DPPC01 0x04000000 /* - " - */ +#define SIUMCR_DPPC10 0x08000000 /* - " - */ +#define SIUMCR_DPPC11 0x0c000000 /* - " - */ +#define SIUMCR_L2CPC00 0x00000000 /* L2 Cache Pins Configuration */ +#define SIUMCR_L2CPC01 0x01000000 /* - " - */ +#define SIUMCR_L2CPC10 0x02000000 /* - " - */ +#define SIUMCR_L2CPC11 0x03000000 /* - " - */ +#define SIUMCR_LBPC00 0x00000000 /* Local Bus Pins Configuration */ +#define SIUMCR_LBPC01 0x00400000 /* - " - */ +#define SIUMCR_LBPC10 0x00800000 /* - " - */ +#define SIUMCR_LBPC11 0x00c00000 /* - " - */ +#define SIUMCR_APPC00 0x00000000 /* Address Parity Pins Configuration*/ +#define SIUMCR_APPC01 0x00100000 /* - " - */ +#define SIUMCR_APPC10 0x00200000 /* - " - */ +#define SIUMCR_APPC11 0x00300000 /* - " - */ +#define SIUMCR_CS10PC00 0x00000000 /* CS10 Pin Configuration */ +#define SIUMCR_CS10PC01 0x00040000 /* - " - */ +#define SIUMCR_CS10PC10 0x00080000 /* - " - */ +#define SIUMCR_CS10PC11 0x000c0000 /* - " - */ +#define SIUMCR_BCTLC00 0x00000000 /* Buffer Control Configuration */ +#define SIUMCR_BCTLC01 0x00010000 /* - " - */ +#define SIUMCR_BCTLC10 0x00020000 /* - " - */ +#define SIUMCR_BCTLC11 0x00030000 /* - " - */ +#define SIUMCR_MMR00 0x00000000 /* Mask Masters Requests */ +#define SIUMCR_MMR01 0x00004000 /* - " - */ +#define SIUMCR_MMR10 0x00008000 /* - " - */ +#define SIUMCR_MMR11 0x0000c000 /* - " - */ +#define SIUMCR_LPBSE 0x00002000 /* LocalBus Parity Byte Select Enable*/ + +/*----------------------------------------------------------------------- + * SCCR - System Clock Control Register 9-8 +*/ +#define SCCR_PCI_MODE 0x00000100 /* PCI Mode */ +#define SCCR_PCI_MODCK 0x00000080 /* Value of PCI_MODCK pin */ +#define SCCR_PCIDF_MSK 0x00000078 /* PCI division factor */ +#define SCCR_PCIDF_SHIFT 3 + +#ifndef CPM_IMMR_OFFSET +#define CPM_IMMR_OFFSET 0x101a8 +#endif + +#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */ + +/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK + * in order to use clock-computing stuff below for the FCC x + */ + +/* Automatically generates register configurations */ +#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */ + +#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */ +#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */ +#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */ +#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */ +#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */ +#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */ + +#define PC_F1RXCLK PC_CLK(F1_RXCLK) +#define PC_F1TXCLK PC_CLK(F1_TXCLK) +#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK)) +#define CMX1_CLK_MASK ((uint)0xff000000) + +#define PC_F2RXCLK PC_CLK(F2_RXCLK) +#define PC_F2TXCLK PC_CLK(F2_TXCLK) +#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK)) +#define CMX2_CLK_MASK ((uint)0x00ff0000) + +#define PC_F3RXCLK PC_CLK(F3_RXCLK) +#define PC_F3TXCLK PC_CLK(F3_TXCLK) +#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK)) +#define CMX3_CLK_MASK ((uint)0x0000ff00) + +#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK) +#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE) + +#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK) + +/* I/O Pin assignment for FCC1. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PA1_COL 0x00000001U +#define PA1_CRS 0x00000002U +#define PA1_TXER 0x00000004U +#define PA1_TXEN 0x00000008U +#define PA1_RXDV 0x00000010U +#define PA1_RXER 0x00000020U +#define PA1_TXDAT 0x00003c00U +#define PA1_RXDAT 0x0003c000U +#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT) +#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \ + PA1_RXDV | PA1_RXER) +#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV) +#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER) + + +/* I/O Pin assignment for FCC2. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB2_TXER 0x00000001U +#define PB2_RXDV 0x00000002U +#define PB2_TXEN 0x00000004U +#define PB2_RXER 0x00000008U +#define PB2_COL 0x00000010U +#define PB2_CRS 0x00000020U +#define PB2_TXDAT 0x000003c0U +#define PB2_RXDAT 0x00003c00U +#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \ + PB2_RXER | PB2_RXDV | PB2_TXER) +#define PB2_PSORB1 (PB2_TXEN) +#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV) +#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER) + + +/* I/O Pin assignment for FCC3. I don't yet know the best way to do this, + * but there is little variation among the choices. + */ +#define PB3_RXDV 0x00004000U +#define PB3_RXER 0x00008000U +#define PB3_TXER 0x00010000U +#define PB3_TXEN 0x00020000U +#define PB3_COL 0x00040000U +#define PB3_CRS 0x00080000U +#define PB3_TXDAT 0x0f000000U +#define PC3_TXDAT 0x00000010U +#define PB3_RXDAT 0x00f00000U +#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \ + PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN) +#define PB3_PSORB1 0 +#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV) +#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER) +#define PC3_DIRC1 (PC3_TXDAT) + +/* Handy macro to specify mem for FCCs*/ +#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128)) +#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0) +#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1) +#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2) + +/* Clocks and GRG's */ + +enum cpm_clk_dir { + CPM_CLK_RX, + CPM_CLK_TX, + CPM_CLK_RTX +}; + +enum cpm_clk_target { + CPM_CLK_SCC1, + CPM_CLK_SCC2, + CPM_CLK_SCC3, + CPM_CLK_SCC4, + CPM_CLK_FCC1, + CPM_CLK_FCC2, + CPM_CLK_FCC3, + CPM_CLK_SMC1, + CPM_CLK_SMC2, +}; + +enum cpm_clk { + CPM_CLK_NONE = 0, + CPM_BRG1, /* Baud Rate Generator 1 */ + CPM_BRG2, /* Baud Rate Generator 2 */ + CPM_BRG3, /* Baud Rate Generator 3 */ + CPM_BRG4, /* Baud Rate Generator 4 */ + CPM_BRG5, /* Baud Rate Generator 5 */ + CPM_BRG6, /* Baud Rate Generator 6 */ + CPM_BRG7, /* Baud Rate Generator 7 */ + CPM_BRG8, /* Baud Rate Generator 8 */ + CPM_CLK1, /* Clock 1 */ + CPM_CLK2, /* Clock 2 */ + CPM_CLK3, /* Clock 3 */ + CPM_CLK4, /* Clock 4 */ + CPM_CLK5, /* Clock 5 */ + CPM_CLK6, /* Clock 6 */ + CPM_CLK7, /* Clock 7 */ + CPM_CLK8, /* Clock 8 */ + CPM_CLK9, /* Clock 9 */ + CPM_CLK10, /* Clock 10 */ + CPM_CLK11, /* Clock 11 */ + CPM_CLK12, /* Clock 12 */ + CPM_CLK13, /* Clock 13 */ + CPM_CLK14, /* Clock 14 */ + CPM_CLK15, /* Clock 15 */ + CPM_CLK16, /* Clock 16 */ + CPM_CLK17, /* Clock 17 */ + CPM_CLK18, /* Clock 18 */ + CPM_CLK19, /* Clock 19 */ + CPM_CLK20, /* Clock 20 */ + CPM_CLK_DUMMY +}; + +extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode); +extern int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock); + +#define CPM_PIN_INPUT 0 +#define CPM_PIN_OUTPUT 1 +#define CPM_PIN_PRIMARY 0 +#define CPM_PIN_SECONDARY 2 +#define CPM_PIN_GPIO 4 +#define CPM_PIN_OPENDRAIN 8 + +void cpm2_set_pin(int port, int pin, int flags); + +#endif /* __CPM2__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/cpu_has_feature.h b/arch/powerpc/include/asm/cpu_has_feature.h new file mode 100644 index 000000000..727d4b321 --- /dev/null +++ b/arch/powerpc/include/asm/cpu_has_feature.h @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_POWERPC_CPU_HAS_FEATURE_H +#define __ASM_POWERPC_CPU_HAS_FEATURE_H + +#ifndef __ASSEMBLY__ + +#include <linux/bug.h> +#include <asm/cputable.h> + +static __always_inline bool early_cpu_has_feature(unsigned long feature) +{ + return !!((CPU_FTRS_ALWAYS & feature) || + (CPU_FTRS_POSSIBLE & cur_cpu_spec->cpu_features & feature)); +} + +#ifdef CONFIG_JUMP_LABEL_FEATURE_CHECKS +#include <linux/jump_label.h> + +#define NUM_CPU_FTR_KEYS BITS_PER_LONG + +extern struct static_key_true cpu_feature_keys[NUM_CPU_FTR_KEYS]; + +static __always_inline bool cpu_has_feature(unsigned long feature) +{ + int i; + +#ifndef __clang__ /* clang can't cope with this */ + BUILD_BUG_ON(!__builtin_constant_p(feature)); +#endif + +#ifdef CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG + if (!static_key_initialized) { + printk("Warning! cpu_has_feature() used prior to jump label init!\n"); + dump_stack(); + return early_cpu_has_feature(feature); + } +#endif + + if (CPU_FTRS_ALWAYS & feature) + return true; + + if (!(CPU_FTRS_POSSIBLE & feature)) + return false; + + i = __builtin_ctzl(feature); + return static_branch_likely(&cpu_feature_keys[i]); +} +#else +static __always_inline bool cpu_has_feature(unsigned long feature) +{ + return early_cpu_has_feature(feature); +} +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_POWERPC_CPU_HAS_FEATURE_H */ diff --git a/arch/powerpc/include/asm/cpu_setup_power.h b/arch/powerpc/include/asm/cpu_setup_power.h new file mode 100644 index 000000000..24be9131f --- /dev/null +++ b/arch/powerpc/include/asm/cpu_setup_power.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2020 IBM Corporation + */ +void __setup_cpu_power7(unsigned long offset, struct cpu_spec *spec); +void __restore_cpu_power7(void); +void __setup_cpu_power8(unsigned long offset, struct cpu_spec *spec); +void __restore_cpu_power8(void); +void __setup_cpu_power9(unsigned long offset, struct cpu_spec *spec); +void __restore_cpu_power9(void); +void __setup_cpu_power10(unsigned long offset, struct cpu_spec *spec); +void __restore_cpu_power10(void); diff --git a/arch/powerpc/include/asm/cpufeature.h b/arch/powerpc/include/asm/cpufeature.h new file mode 100644 index 000000000..f6f790a90 --- /dev/null +++ b/arch/powerpc/include/asm/cpufeature.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * CPU feature definitions for module loading, used by + * module_cpu_feature_match(), see asm/cputable.h for powerpc CPU features. + * + * Copyright 2016 Alastair D'Silva, IBM Corporation. + */ + +#ifndef __ASM_POWERPC_CPUFEATURE_H +#define __ASM_POWERPC_CPUFEATURE_H + +#include <asm/cputable.h> + +/* Keep these in step with powerpc/include/asm/cputable.h */ +#define MAX_CPU_FEATURES (2 * 32) + +/* + * Currently we don't have a need for any of the feature bits defined in + * cpu_user_features. When we do, they should be defined such as: + * + * #define PPC_MODULE_FEATURE_32 (ilog2(PPC_FEATURE_32)) + */ + +#define PPC_MODULE_FEATURE_VEC_CRYPTO (32 + ilog2(PPC_FEATURE2_VEC_CRYPTO)) + +#define cpu_feature(x) (x) + +static inline bool cpu_have_feature(unsigned int num) +{ + if (num < 32) + return !!(cur_cpu_spec->cpu_user_features & 1UL << num); + else + return !!(cur_cpu_spec->cpu_user_features2 & 1UL << (num - 32)); +} + +#endif /* __ASM_POWERPC_CPUFEATURE_H */ diff --git a/arch/powerpc/include/asm/cpuidle.h b/arch/powerpc/include/asm/cpuidle.h new file mode 100644 index 000000000..9844b3ded --- /dev/null +++ b/arch/powerpc/include/asm/cpuidle.h @@ -0,0 +1,105 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_CPUIDLE_H +#define _ASM_POWERPC_CPUIDLE_H + +#ifdef CONFIG_PPC_POWERNV +/* Thread state used in powernv idle state management */ +#define PNV_THREAD_RUNNING 0 +#define PNV_THREAD_NAP 1 +#define PNV_THREAD_SLEEP 2 +#define PNV_THREAD_WINKLE 3 + +/* + * Core state used in powernv idle for POWER8. + * + * The lock bit synchronizes updates to the state, as well as parts of the + * sleep/wake code (see kernel/idle_book3s.S). + * + * Bottom 8 bits track the idle state of each thread. Bit is cleared before + * the thread executes an idle instruction (nap/sleep/winkle). + * + * Then there is winkle tracking. A core does not lose complete state + * until every thread is in winkle. So the winkle count field counts the + * number of threads in winkle (small window of false positives is okay + * around the sleep/wake, so long as there are no false negatives). + * + * When the winkle count reaches 8 (the COUNT_ALL_BIT becomes set), then + * the THREAD_WINKLE_BITS are set, which indicate which threads have not + * yet woken from the winkle state. + */ +#define NR_PNV_CORE_IDLE_LOCK_BIT 28 +#define PNV_CORE_IDLE_LOCK_BIT (1ULL << NR_PNV_CORE_IDLE_LOCK_BIT) + +#define PNV_CORE_IDLE_WINKLE_COUNT_SHIFT 16 +#define PNV_CORE_IDLE_WINKLE_COUNT 0x00010000 +#define PNV_CORE_IDLE_WINKLE_COUNT_BITS 0x000F0000 +#define PNV_CORE_IDLE_THREAD_WINKLE_BITS_SHIFT 8 +#define PNV_CORE_IDLE_THREAD_WINKLE_BITS 0x0000FF00 + +#define PNV_CORE_IDLE_THREAD_BITS 0x000000FF + +/* + * ============================ NOTE ================================= + * The older firmware populates only the RL field in the psscr_val and + * sets the psscr_mask to 0xf. On such a firmware, the kernel sets the + * remaining PSSCR fields to default values as follows: + * + * - ESL and EC bits are to 1. So wakeup from any stop state will be + * at vector 0x100. + * + * - MTL and PSLL are set to the maximum allowed value as per the ISA, + * i.e. 15. + * + * - The Transition Rate, TR is set to the Maximum value 3. + */ +#define PSSCR_HV_DEFAULT_VAL (PSSCR_ESL | PSSCR_EC | \ + PSSCR_PSLL_MASK | PSSCR_TR_MASK | \ + PSSCR_MTL_MASK) + +#define PSSCR_HV_DEFAULT_MASK (PSSCR_ESL | PSSCR_EC | \ + PSSCR_PSLL_MASK | PSSCR_TR_MASK | \ + PSSCR_MTL_MASK | PSSCR_RL_MASK) +#define PSSCR_EC_SHIFT 20 +#define PSSCR_ESL_SHIFT 21 +#define GET_PSSCR_EC(x) (((x) & PSSCR_EC) >> PSSCR_EC_SHIFT) +#define GET_PSSCR_ESL(x) (((x) & PSSCR_ESL) >> PSSCR_ESL_SHIFT) +#define GET_PSSCR_RL(x) ((x) & PSSCR_RL_MASK) + +#define ERR_EC_ESL_MISMATCH -1 +#define ERR_DEEP_STATE_ESL_MISMATCH -2 + +#ifndef __ASSEMBLY__ + +#define PNV_IDLE_NAME_LEN 16 +struct pnv_idle_states_t { + char name[PNV_IDLE_NAME_LEN]; + u32 latency_ns; + u32 residency_ns; + u64 psscr_val; + u64 psscr_mask; + u32 flags; + bool valid; +}; + +extern struct pnv_idle_states_t *pnv_idle_states; +extern int nr_pnv_idle_states; + +unsigned long pnv_cpu_offline(unsigned int cpu); +int validate_psscr_val_mask(u64 *psscr_val, u64 *psscr_mask, u32 flags); +static inline void report_invalid_psscr_val(u64 psscr_val, int err) +{ + switch (err) { + case ERR_EC_ESL_MISMATCH: + pr_warn("Invalid psscr 0x%016llx : ESL,EC bits unequal", + psscr_val); + break; + case ERR_DEEP_STATE_ESL_MISMATCH: + pr_warn("Invalid psscr 0x%016llx : ESL cleared for deep stop-state", + psscr_val); + } +} +#endif + +#endif + +#endif diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h new file mode 100644 index 000000000..398eba399 --- /dev/null +++ b/arch/powerpc/include/asm/cputable.h @@ -0,0 +1,629 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_POWERPC_CPUTABLE_H +#define __ASM_POWERPC_CPUTABLE_H + + +#include <linux/types.h> +#include <uapi/asm/cputable.h> +#include <asm/asm-const.h> + +#ifndef __ASSEMBLY__ + +/* This structure can grow, it's real size is used by head.S code + * via the mkdefs mechanism. + */ +struct cpu_spec; + +typedef void (*cpu_setup_t)(unsigned long offset, struct cpu_spec* spec); +typedef void (*cpu_restore_t)(void); + +enum powerpc_oprofile_type { + PPC_OPROFILE_INVALID = 0, + PPC_OPROFILE_RS64 = 1, + PPC_OPROFILE_POWER4 = 2, + PPC_OPROFILE_G4 = 3, + PPC_OPROFILE_FSL_EMB = 4, + PPC_OPROFILE_CELL = 5, + PPC_OPROFILE_PA6T = 6, +}; + +enum powerpc_pmc_type { + PPC_PMC_DEFAULT = 0, + PPC_PMC_IBM = 1, + PPC_PMC_PA6T = 2, + PPC_PMC_G4 = 3, +}; + +struct pt_regs; + +extern int machine_check_generic(struct pt_regs *regs); +extern int machine_check_4xx(struct pt_regs *regs); +extern int machine_check_440A(struct pt_regs *regs); +extern int machine_check_e500mc(struct pt_regs *regs); +extern int machine_check_e500(struct pt_regs *regs); +extern int machine_check_e200(struct pt_regs *regs); +extern int machine_check_47x(struct pt_regs *regs); +int machine_check_8xx(struct pt_regs *regs); +int machine_check_83xx(struct pt_regs *regs); + +extern void cpu_down_flush_e500v2(void); +extern void cpu_down_flush_e500mc(void); +extern void cpu_down_flush_e5500(void); +extern void cpu_down_flush_e6500(void); + +/* NOTE WELL: Update identify_cpu() if fields are added or removed! */ +struct cpu_spec { + /* CPU is matched via (PVR & pvr_mask) == pvr_value */ + unsigned int pvr_mask; + unsigned int pvr_value; + + char *cpu_name; + unsigned long cpu_features; /* Kernel features */ + unsigned int cpu_user_features; /* Userland features */ + unsigned int cpu_user_features2; /* Userland features v2 */ + unsigned int mmu_features; /* MMU features */ + + /* cache line sizes */ + unsigned int icache_bsize; + unsigned int dcache_bsize; + + /* flush caches inside the current cpu */ + void (*cpu_down_flush)(void); + + /* number of performance monitor counters */ + unsigned int num_pmcs; + enum powerpc_pmc_type pmc_type; + + /* this is called to initialize various CPU bits like L1 cache, + * BHT, SPD, etc... from head.S before branching to identify_machine + */ + cpu_setup_t cpu_setup; + /* Used to restore cpu setup on secondary processors and at resume */ + cpu_restore_t cpu_restore; + + /* Used by oprofile userspace to select the right counters */ + char *oprofile_cpu_type; + + /* Processor specific oprofile operations */ + enum powerpc_oprofile_type oprofile_type; + + /* Bit locations inside the mmcra change */ + unsigned long oprofile_mmcra_sihv; + unsigned long oprofile_mmcra_sipr; + + /* Bits to clear during an oprofile exception */ + unsigned long oprofile_mmcra_clear; + + /* Name of processor class, for the ELF AT_PLATFORM entry */ + char *platform; + + /* Processor specific machine check handling. Return negative + * if the error is fatal, 1 if it was fully recovered and 0 to + * pass up (not CPU originated) */ + int (*machine_check)(struct pt_regs *regs); + + /* + * Processor specific early machine check handler which is + * called in real mode to handle SLB and TLB errors. + */ + long (*machine_check_early)(struct pt_regs *regs); +}; + +extern struct cpu_spec *cur_cpu_spec; + +extern unsigned int __start___ftr_fixup, __stop___ftr_fixup; + +extern void set_cur_cpu_spec(struct cpu_spec *s); +extern struct cpu_spec *identify_cpu(unsigned long offset, unsigned int pvr); +extern void identify_cpu_name(unsigned int pvr); +extern void do_feature_fixups(unsigned long value, void *fixup_start, + void *fixup_end); + +extern const char *powerpc_base_platform; + +#ifdef CONFIG_JUMP_LABEL_FEATURE_CHECKS +extern void cpu_feature_keys_init(void); +#else +static inline void cpu_feature_keys_init(void) { } +#endif + +#endif /* __ASSEMBLY__ */ + +/* CPU kernel features */ + +/* Definitions for features that we have on both 32-bit and 64-bit chips */ +#define CPU_FTR_COHERENT_ICACHE ASM_CONST(0x00000001) +#define CPU_FTR_ALTIVEC ASM_CONST(0x00000002) +#define CPU_FTR_DBELL ASM_CONST(0x00000004) +#define CPU_FTR_CAN_NAP ASM_CONST(0x00000008) +#define CPU_FTR_DEBUG_LVL_EXC ASM_CONST(0x00000010) +#define CPU_FTR_NODSISRALIGN ASM_CONST(0x00000020) +#define CPU_FTR_FPU_UNAVAILABLE ASM_CONST(0x00000040) +#define CPU_FTR_LWSYNC ASM_CONST(0x00000080) +#define CPU_FTR_NOEXECUTE ASM_CONST(0x00000100) +#define CPU_FTR_EMB_HV ASM_CONST(0x00000200) + +/* Definitions for features that only exist on 32-bit chips */ +#ifdef CONFIG_PPC32 +#define CPU_FTR_L2CR ASM_CONST(0x00002000) +#define CPU_FTR_SPEC7450 ASM_CONST(0x00004000) +#define CPU_FTR_TAU ASM_CONST(0x00008000) +#define CPU_FTR_CAN_DOZE ASM_CONST(0x00010000) +#define CPU_FTR_L3CR ASM_CONST(0x00040000) +#define CPU_FTR_L3_DISABLE_NAP ASM_CONST(0x00080000) +#define CPU_FTR_NAP_DISABLE_L2_PR ASM_CONST(0x00100000) +#define CPU_FTR_DUAL_PLL_750FX ASM_CONST(0x00200000) +#define CPU_FTR_NO_DPM ASM_CONST(0x00400000) +#define CPU_FTR_476_DD2 ASM_CONST(0x00800000) +#define CPU_FTR_NEED_COHERENT ASM_CONST(0x01000000) +#define CPU_FTR_NO_BTIC ASM_CONST(0x02000000) +#define CPU_FTR_PPC_LE ASM_CONST(0x04000000) +#define CPU_FTR_SPE ASM_CONST(0x10000000) +#define CPU_FTR_NEED_PAIRED_STWCX ASM_CONST(0x20000000) +#define CPU_FTR_INDEXED_DCR ASM_CONST(0x40000000) + +#else /* CONFIG_PPC32 */ +/* Define these to 0 for the sake of tests in common code */ +#define CPU_FTR_PPC_LE (0) +#define CPU_FTR_SPE (0) +#endif + +/* + * Definitions for the 64-bit processor unique features; + * on 32-bit, make the names available but defined to be 0. + */ +#ifdef __powerpc64__ +#define LONG_ASM_CONST(x) ASM_CONST(x) +#else +#define LONG_ASM_CONST(x) 0 +#endif + +#define CPU_FTR_REAL_LE LONG_ASM_CONST(0x0000000000001000) +#define CPU_FTR_HVMODE LONG_ASM_CONST(0x0000000000002000) +#define CPU_FTR_ARCH_206 LONG_ASM_CONST(0x0000000000008000) +#define CPU_FTR_ARCH_207S LONG_ASM_CONST(0x0000000000010000) +#define CPU_FTR_ARCH_300 LONG_ASM_CONST(0x0000000000020000) +#define CPU_FTR_MMCRA LONG_ASM_CONST(0x0000000000040000) +#define CPU_FTR_CTRL LONG_ASM_CONST(0x0000000000080000) +#define CPU_FTR_SMT LONG_ASM_CONST(0x0000000000100000) +#define CPU_FTR_PAUSE_ZERO LONG_ASM_CONST(0x0000000000200000) +#define CPU_FTR_PURR LONG_ASM_CONST(0x0000000000400000) +#define CPU_FTR_CELL_TB_BUG LONG_ASM_CONST(0x0000000000800000) +#define CPU_FTR_SPURR LONG_ASM_CONST(0x0000000001000000) +#define CPU_FTR_DSCR LONG_ASM_CONST(0x0000000002000000) +#define CPU_FTR_VSX LONG_ASM_CONST(0x0000000004000000) +#define CPU_FTR_SAO LONG_ASM_CONST(0x0000000008000000) +#define CPU_FTR_CP_USE_DCBTZ LONG_ASM_CONST(0x0000000010000000) +#define CPU_FTR_UNALIGNED_LD_STD LONG_ASM_CONST(0x0000000020000000) +#define CPU_FTR_ASYM_SMT LONG_ASM_CONST(0x0000000040000000) +#define CPU_FTR_STCX_CHECKS_ADDRESS LONG_ASM_CONST(0x0000000080000000) +#define CPU_FTR_POPCNTB LONG_ASM_CONST(0x0000000100000000) +#define CPU_FTR_POPCNTD LONG_ASM_CONST(0x0000000200000000) +/* LONG_ASM_CONST(0x0000000400000000) Free */ +#define CPU_FTR_VMX_COPY LONG_ASM_CONST(0x0000000800000000) +#define CPU_FTR_TM LONG_ASM_CONST(0x0000001000000000) +#define CPU_FTR_CFAR LONG_ASM_CONST(0x0000002000000000) +#define CPU_FTR_HAS_PPR LONG_ASM_CONST(0x0000004000000000) +#define CPU_FTR_DAWR LONG_ASM_CONST(0x0000008000000000) +#define CPU_FTR_DABRX LONG_ASM_CONST(0x0000010000000000) +#define CPU_FTR_PMAO_BUG LONG_ASM_CONST(0x0000020000000000) +#define CPU_FTR_POWER9_DD2_1 LONG_ASM_CONST(0x0000080000000000) +#define CPU_FTR_P9_TM_HV_ASSIST LONG_ASM_CONST(0x0000100000000000) +#define CPU_FTR_P9_TM_XER_SO_BUG LONG_ASM_CONST(0x0000200000000000) +#define CPU_FTR_P9_TLBIE_STQ_BUG LONG_ASM_CONST(0x0000400000000000) +#define CPU_FTR_P9_TIDR LONG_ASM_CONST(0x0000800000000000) +#define CPU_FTR_P9_TLBIE_ERAT_BUG LONG_ASM_CONST(0x0001000000000000) +#define CPU_FTR_P9_RADIX_PREFETCH_BUG LONG_ASM_CONST(0x0002000000000000) +#define CPU_FTR_ARCH_31 LONG_ASM_CONST(0x0004000000000000) +#define CPU_FTR_DAWR1 LONG_ASM_CONST(0x0008000000000000) + +#ifndef __ASSEMBLY__ + +#define CPU_FTR_PPCAS_ARCH_V2 (CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN) + +#define MMU_FTR_PPCAS_ARCH_V2 (MMU_FTR_TLBIEL | MMU_FTR_16M_PAGE) + +/* We only set the altivec features if the kernel was compiled with altivec + * support + */ +#ifdef CONFIG_ALTIVEC +#define CPU_FTR_ALTIVEC_COMP CPU_FTR_ALTIVEC +#define PPC_FEATURE_HAS_ALTIVEC_COMP PPC_FEATURE_HAS_ALTIVEC +#else +#define CPU_FTR_ALTIVEC_COMP 0 +#define PPC_FEATURE_HAS_ALTIVEC_COMP 0 +#endif + +/* We only set the VSX features if the kernel was compiled with VSX + * support + */ +#ifdef CONFIG_VSX +#define CPU_FTR_VSX_COMP CPU_FTR_VSX +#define PPC_FEATURE_HAS_VSX_COMP PPC_FEATURE_HAS_VSX +#else +#define CPU_FTR_VSX_COMP 0 +#define PPC_FEATURE_HAS_VSX_COMP 0 +#endif + +/* We only set the spe features if the kernel was compiled with spe + * support + */ +#ifdef CONFIG_SPE +#define CPU_FTR_SPE_COMP CPU_FTR_SPE +#define PPC_FEATURE_HAS_SPE_COMP PPC_FEATURE_HAS_SPE +#define PPC_FEATURE_HAS_EFP_SINGLE_COMP PPC_FEATURE_HAS_EFP_SINGLE +#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP PPC_FEATURE_HAS_EFP_DOUBLE +#else +#define CPU_FTR_SPE_COMP 0 +#define PPC_FEATURE_HAS_SPE_COMP 0 +#define PPC_FEATURE_HAS_EFP_SINGLE_COMP 0 +#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP 0 +#endif + +/* We only set the TM feature if the kernel was compiled with TM supprt */ +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +#define CPU_FTR_TM_COMP CPU_FTR_TM +#define PPC_FEATURE2_HTM_COMP PPC_FEATURE2_HTM +#define PPC_FEATURE2_HTM_NOSC_COMP PPC_FEATURE2_HTM_NOSC +#else +#define CPU_FTR_TM_COMP 0 +#define PPC_FEATURE2_HTM_COMP 0 +#define PPC_FEATURE2_HTM_NOSC_COMP 0 +#endif + +/* We need to mark all pages as being coherent if we're SMP or we have a + * 74[45]x and an MPC107 host bridge. Also 83xx and PowerQUICC II + * require it for PCI "streaming/prefetch" to work properly. + * This is also required by 52xx family. + */ +#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) \ + || defined(CONFIG_PPC_83xx) || defined(CONFIG_8260) \ + || defined(CONFIG_PPC_MPC52xx) +#define CPU_FTR_COMMON CPU_FTR_NEED_COHERENT +#else +#define CPU_FTR_COMMON 0 +#endif + +/* The powersave features NAP & DOZE seems to confuse BDI when + debugging. So if a BDI is used, disable theses + */ +#ifndef CONFIG_BDI_SWITCH +#define CPU_FTR_MAYBE_CAN_DOZE CPU_FTR_CAN_DOZE +#define CPU_FTR_MAYBE_CAN_NAP CPU_FTR_CAN_NAP +#else +#define CPU_FTR_MAYBE_CAN_DOZE 0 +#define CPU_FTR_MAYBE_CAN_NAP 0 +#endif + +#define CPU_FTRS_603 (CPU_FTR_COMMON | CPU_FTR_MAYBE_CAN_DOZE | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE | CPU_FTR_NOEXECUTE) +#define CPU_FTRS_604 (CPU_FTR_COMMON | CPU_FTR_PPC_LE) +#define CPU_FTRS_740_NOTAU (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_L2CR | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) +#define CPU_FTRS_740 (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_L2CR | \ + CPU_FTR_TAU | CPU_FTR_MAYBE_CAN_NAP | \ + CPU_FTR_PPC_LE) +#define CPU_FTRS_750 (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_L2CR | \ + CPU_FTR_TAU | CPU_FTR_MAYBE_CAN_NAP | \ + CPU_FTR_PPC_LE) +#define CPU_FTRS_750CL (CPU_FTRS_750) +#define CPU_FTRS_750FX1 (CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | CPU_FTR_NO_DPM) +#define CPU_FTRS_750FX2 (CPU_FTRS_750 | CPU_FTR_NO_DPM) +#define CPU_FTRS_750FX (CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX) +#define CPU_FTRS_750GX (CPU_FTRS_750FX) +#define CPU_FTRS_7400_NOTAU (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_L2CR | \ + CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) +#define CPU_FTRS_7400 (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_L2CR | \ + CPU_FTR_TAU | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) +#define CPU_FTRS_7450_20 (CPU_FTR_COMMON | \ + CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_SPEC7450 | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_7450_21 (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_SPEC7450 | \ + CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_7450_23 (CPU_FTR_COMMON | \ + CPU_FTR_NEED_PAIRED_STWCX | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_SPEC7450 | \ + CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE) +#define CPU_FTRS_7455_1 (CPU_FTR_COMMON | \ + CPU_FTR_NEED_PAIRED_STWCX | \ + CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR | \ + CPU_FTR_SPEC7450 | CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE) +#define CPU_FTRS_7455_20 (CPU_FTR_COMMON | \ + CPU_FTR_NEED_PAIRED_STWCX | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_SPEC7450 | \ + CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE) +#define CPU_FTRS_7455 (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_7447_10 (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_NO_BTIC | CPU_FTR_PPC_LE | \ + CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_7447 (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_L3CR | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_7447A (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR | \ + CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_7448 (CPU_FTR_COMMON | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR | \ + CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX) +#define CPU_FTRS_82XX (CPU_FTR_COMMON | CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_NOEXECUTE) +#define CPU_FTRS_G2_LE (CPU_FTR_COMMON | CPU_FTR_MAYBE_CAN_DOZE | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NOEXECUTE) +#define CPU_FTRS_E300 (CPU_FTR_MAYBE_CAN_DOZE | \ + CPU_FTR_MAYBE_CAN_NAP | \ + CPU_FTR_COMMON | CPU_FTR_NOEXECUTE) +#define CPU_FTRS_E300C2 (CPU_FTR_MAYBE_CAN_DOZE | \ + CPU_FTR_MAYBE_CAN_NAP | \ + CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE | CPU_FTR_NOEXECUTE) +#define CPU_FTRS_CLASSIC32 (CPU_FTR_COMMON) +#define CPU_FTRS_8XX (CPU_FTR_NOEXECUTE) +#define CPU_FTRS_40X (CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE) +#define CPU_FTRS_44X (CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE) +#define CPU_FTRS_440x6 (CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE | \ + CPU_FTR_INDEXED_DCR) +#define CPU_FTRS_47X (CPU_FTRS_440x6) +#define CPU_FTRS_E200 (CPU_FTR_SPE_COMP | \ + CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \ + CPU_FTR_NOEXECUTE | \ + CPU_FTR_DEBUG_LVL_EXC) +#define CPU_FTRS_E500 (CPU_FTR_MAYBE_CAN_DOZE | \ + CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN | \ + CPU_FTR_NOEXECUTE) +#define CPU_FTRS_E500_2 (CPU_FTR_MAYBE_CAN_DOZE | \ + CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | \ + CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE) +#define CPU_FTRS_E500MC (CPU_FTR_NODSISRALIGN | \ + CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \ + CPU_FTR_DBELL | CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV) +/* + * e5500/e6500 erratum A-006958 is a timebase bug that can use the + * same workaround as CPU_FTR_CELL_TB_BUG. + */ +#define CPU_FTRS_E5500 (CPU_FTR_NODSISRALIGN | \ + CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \ + CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ + CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV | CPU_FTR_CELL_TB_BUG) +#define CPU_FTRS_E6500 (CPU_FTR_NODSISRALIGN | \ + CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \ + CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ + CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_CELL_TB_BUG | CPU_FTR_SMT) + +/* 64-bit CPUs */ +#define CPU_FTRS_PPC970 (CPU_FTR_LWSYNC | \ + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ + CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA | \ + CPU_FTR_CP_USE_DCBTZ | CPU_FTR_STCX_CHECKS_ADDRESS | \ + CPU_FTR_HVMODE | CPU_FTR_DABRX) +#define CPU_FTRS_POWER5 (CPU_FTR_LWSYNC | \ + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ + CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_COHERENT_ICACHE | CPU_FTR_PURR | \ + CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_DABRX) +#define CPU_FTRS_POWER6 (CPU_FTR_LWSYNC | \ + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ + CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_COHERENT_ICACHE | \ + CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ + CPU_FTR_DSCR | CPU_FTR_UNALIGNED_LD_STD | \ + CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_CFAR | \ + CPU_FTR_DABRX) +#define CPU_FTRS_POWER7 (CPU_FTR_LWSYNC | \ + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\ + CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_COHERENT_ICACHE | \ + CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ + CPU_FTR_DSCR | CPU_FTR_SAO | CPU_FTR_ASYM_SMT | \ + CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ + CPU_FTR_CFAR | CPU_FTR_HVMODE | \ + CPU_FTR_VMX_COPY | CPU_FTR_HAS_PPR | CPU_FTR_DABRX ) +#define CPU_FTRS_POWER8 (CPU_FTR_LWSYNC | \ + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\ + CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_COHERENT_ICACHE | \ + CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ + CPU_FTR_DSCR | CPU_FTR_SAO | \ + CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ + CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \ + CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_DAWR | \ + CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP ) +#define CPU_FTRS_POWER8E (CPU_FTRS_POWER8 | CPU_FTR_PMAO_BUG) +#define CPU_FTRS_POWER9 (CPU_FTR_LWSYNC | \ + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\ + CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_COHERENT_ICACHE | \ + CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ + CPU_FTR_DSCR | CPU_FTR_SAO | \ + CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ + CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \ + CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_ARCH_207S | \ + CPU_FTR_TM_COMP | CPU_FTR_ARCH_300 | CPU_FTR_P9_TLBIE_STQ_BUG | \ + CPU_FTR_P9_TLBIE_ERAT_BUG | CPU_FTR_P9_TIDR) +#define CPU_FTRS_POWER9_DD2_0 (CPU_FTRS_POWER9 | CPU_FTR_P9_RADIX_PREFETCH_BUG) +#define CPU_FTRS_POWER9_DD2_1 (CPU_FTRS_POWER9 | \ + CPU_FTR_P9_RADIX_PREFETCH_BUG | \ + CPU_FTR_POWER9_DD2_1) +#define CPU_FTRS_POWER9_DD2_2 (CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD2_1 | \ + CPU_FTR_P9_TM_HV_ASSIST | \ + CPU_FTR_P9_TM_XER_SO_BUG) +#define CPU_FTRS_POWER10 (CPU_FTR_LWSYNC | \ + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\ + CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_COHERENT_ICACHE | \ + CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ + CPU_FTR_DSCR | CPU_FTR_SAO | \ + CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ + CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \ + CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_ARCH_207S | \ + CPU_FTR_ARCH_300 | CPU_FTR_ARCH_31 | \ + CPU_FTR_DAWR | CPU_FTR_DAWR1) +#define CPU_FTRS_CELL (CPU_FTR_LWSYNC | \ + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ + CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_PAUSE_ZERO | CPU_FTR_CELL_TB_BUG | CPU_FTR_CP_USE_DCBTZ | \ + CPU_FTR_UNALIGNED_LD_STD | CPU_FTR_DABRX) +#define CPU_FTRS_PA6T (CPU_FTR_LWSYNC | \ + CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_DABRX) +#define CPU_FTRS_COMPATIBLE (CPU_FTR_PPCAS_ARCH_V2) + +#ifdef __powerpc64__ +#ifdef CONFIG_PPC_BOOK3E +#define CPU_FTRS_POSSIBLE (CPU_FTRS_E6500 | CPU_FTRS_E5500) +#else +#ifdef CONFIG_CPU_LITTLE_ENDIAN +#define CPU_FTRS_POSSIBLE \ + (CPU_FTRS_POWER7 | CPU_FTRS_POWER8E | CPU_FTRS_POWER8 | \ + CPU_FTR_ALTIVEC_COMP | CPU_FTR_VSX_COMP | CPU_FTRS_POWER9 | \ + CPU_FTRS_POWER9_DD2_1 | CPU_FTRS_POWER9_DD2_2 | CPU_FTRS_POWER10) +#else +#define CPU_FTRS_POSSIBLE \ + (CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | \ + CPU_FTRS_POWER6 | CPU_FTRS_POWER7 | CPU_FTRS_POWER8E | \ + CPU_FTRS_POWER8 | CPU_FTRS_CELL | CPU_FTRS_PA6T | \ + CPU_FTR_VSX_COMP | CPU_FTR_ALTIVEC_COMP | CPU_FTRS_POWER9 | \ + CPU_FTRS_POWER9_DD2_1 | CPU_FTRS_POWER9_DD2_2 | CPU_FTRS_POWER10) +#endif /* CONFIG_CPU_LITTLE_ENDIAN */ +#endif +#else +enum { + CPU_FTRS_POSSIBLE = +#ifdef CONFIG_PPC_BOOK3S_32 + CPU_FTRS_603 | CPU_FTRS_604 | CPU_FTRS_740_NOTAU | + CPU_FTRS_740 | CPU_FTRS_750 | CPU_FTRS_750FX1 | + CPU_FTRS_750FX2 | CPU_FTRS_750FX | CPU_FTRS_750GX | + CPU_FTRS_7400_NOTAU | CPU_FTRS_7400 | CPU_FTRS_7450_20 | + CPU_FTRS_7450_21 | CPU_FTRS_7450_23 | CPU_FTRS_7455_1 | + CPU_FTRS_7455_20 | CPU_FTRS_7455 | CPU_FTRS_7447_10 | + CPU_FTRS_7447 | CPU_FTRS_7447A | CPU_FTRS_82XX | + CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_E300C2 | + CPU_FTRS_CLASSIC32 | +#endif +#ifdef CONFIG_PPC_8xx + CPU_FTRS_8XX | +#endif +#ifdef CONFIG_40x + CPU_FTRS_40X | +#endif +#ifdef CONFIG_44x + CPU_FTRS_44X | CPU_FTRS_440x6 | +#endif +#ifdef CONFIG_PPC_47x + CPU_FTRS_47X | CPU_FTR_476_DD2 | +#endif +#ifdef CONFIG_E200 + CPU_FTRS_E200 | +#endif +#ifdef CONFIG_E500 + CPU_FTRS_E500 | CPU_FTRS_E500_2 | +#endif +#ifdef CONFIG_PPC_E500MC + CPU_FTRS_E500MC | CPU_FTRS_E5500 | CPU_FTRS_E6500 | +#endif + 0, +}; +#endif /* __powerpc64__ */ + +#ifdef __powerpc64__ +#ifdef CONFIG_PPC_BOOK3E +#define CPU_FTRS_ALWAYS (CPU_FTRS_E6500 & CPU_FTRS_E5500) +#else + +#ifdef CONFIG_PPC_DT_CPU_FTRS +#define CPU_FTRS_DT_CPU_BASE \ + (CPU_FTR_LWSYNC | \ + CPU_FTR_FPU_UNAVAILABLE | \ + CPU_FTR_NODSISRALIGN | \ + CPU_FTR_NOEXECUTE | \ + CPU_FTR_COHERENT_ICACHE | \ + CPU_FTR_STCX_CHECKS_ADDRESS | \ + CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ + CPU_FTR_DAWR | \ + CPU_FTR_ARCH_206 | \ + CPU_FTR_ARCH_207S) +#else +#define CPU_FTRS_DT_CPU_BASE (~0ul) +#endif + +#ifdef CONFIG_CPU_LITTLE_ENDIAN +#define CPU_FTRS_ALWAYS \ + (CPU_FTRS_POSSIBLE & ~CPU_FTR_HVMODE & CPU_FTRS_POWER7 & \ + CPU_FTRS_POWER8E & CPU_FTRS_POWER8 & CPU_FTRS_POWER9 & \ + CPU_FTRS_POWER9_DD2_1 & CPU_FTRS_DT_CPU_BASE) +#else +#define CPU_FTRS_ALWAYS \ + (CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & \ + CPU_FTRS_POWER6 & CPU_FTRS_POWER7 & CPU_FTRS_CELL & \ + CPU_FTRS_PA6T & CPU_FTRS_POWER8 & CPU_FTRS_POWER8E & \ + ~CPU_FTR_HVMODE & CPU_FTRS_POSSIBLE & CPU_FTRS_POWER9 & \ + CPU_FTRS_POWER9_DD2_1 & CPU_FTRS_DT_CPU_BASE) +#endif /* CONFIG_CPU_LITTLE_ENDIAN */ +#endif +#else +enum { + CPU_FTRS_ALWAYS = +#ifdef CONFIG_PPC_BOOK3S_32 + CPU_FTRS_603 & CPU_FTRS_604 & CPU_FTRS_740_NOTAU & + CPU_FTRS_740 & CPU_FTRS_750 & CPU_FTRS_750FX1 & + CPU_FTRS_750FX2 & CPU_FTRS_750FX & CPU_FTRS_750GX & + CPU_FTRS_7400_NOTAU & CPU_FTRS_7400 & CPU_FTRS_7450_20 & + CPU_FTRS_7450_21 & CPU_FTRS_7450_23 & CPU_FTRS_7455_1 & + CPU_FTRS_7455_20 & CPU_FTRS_7455 & CPU_FTRS_7447_10 & + CPU_FTRS_7447 & CPU_FTRS_7447A & CPU_FTRS_82XX & + CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_E300C2 & + CPU_FTRS_CLASSIC32 & +#endif +#ifdef CONFIG_PPC_8xx + CPU_FTRS_8XX & +#endif +#ifdef CONFIG_40x + CPU_FTRS_40X & +#endif +#ifdef CONFIG_44x + CPU_FTRS_44X & CPU_FTRS_440x6 & +#endif +#ifdef CONFIG_E200 + CPU_FTRS_E200 & +#endif +#ifdef CONFIG_E500 + CPU_FTRS_E500 & CPU_FTRS_E500_2 & +#endif +#ifdef CONFIG_PPC_E500MC + CPU_FTRS_E500MC & CPU_FTRS_E5500 & CPU_FTRS_E6500 & +#endif + ~CPU_FTR_EMB_HV & /* can be removed at runtime */ + CPU_FTRS_POSSIBLE, +}; +#endif /* __powerpc64__ */ + +/* + * Maximum number of hw breakpoint supported on powerpc. Number of + * breakpoints supported by actual hw might be less than this, which + * is decided at run time in nr_wp_slots(). + */ +#define HBP_NUM_MAX 2 + +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_POWERPC_CPUTABLE_H */ diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h new file mode 100644 index 000000000..b167186aa --- /dev/null +++ b/arch/powerpc/include/asm/cputhreads.h @@ -0,0 +1,148 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_CPUTHREADS_H +#define _ASM_POWERPC_CPUTHREADS_H + +#ifndef __ASSEMBLY__ +#include <linux/cpumask.h> +#include <asm/cpu_has_feature.h> + +/* + * Mapping of threads to cores + * + * Note: This implementation is limited to a power of 2 number of + * threads per core and the same number for each core in the system + * (though it would work if some processors had less threads as long + * as the CPU numbers are still allocated, just not brought online). + * + * However, the API allows for a different implementation in the future + * if needed, as long as you only use the functions and not the variables + * directly. + */ + +#ifdef CONFIG_SMP +extern int threads_per_core; +extern int threads_per_subcore; +extern int threads_shift; +extern cpumask_t threads_core_mask; +#else +#define threads_per_core 1 +#define threads_per_subcore 1 +#define threads_shift 0 +#define has_big_cores 0 +#define threads_core_mask (*get_cpu_mask(0)) +#endif + +/* cpu_thread_mask_to_cores - Return a cpumask of one per cores + * hit by the argument + * + * @threads: a cpumask of online threads + * + * This function returns a cpumask which will have one online cpu's + * bit set for each core that has at least one thread set in the argument. + * + * This can typically be used for things like IPI for tlb invalidations + * since those need to be done only once per core/TLB + */ +static inline cpumask_t cpu_thread_mask_to_cores(const struct cpumask *threads) +{ + cpumask_t tmp, res; + int i, cpu; + + cpumask_clear(&res); + for (i = 0; i < NR_CPUS; i += threads_per_core) { + cpumask_shift_left(&tmp, &threads_core_mask, i); + if (cpumask_intersects(threads, &tmp)) { + cpu = cpumask_next_and(-1, &tmp, cpu_online_mask); + if (cpu < nr_cpu_ids) + cpumask_set_cpu(cpu, &res); + } + } + return res; +} + +static inline int cpu_nr_cores(void) +{ + return nr_cpu_ids >> threads_shift; +} + +static inline cpumask_t cpu_online_cores_map(void) +{ + return cpu_thread_mask_to_cores(cpu_online_mask); +} + +#ifdef CONFIG_SMP +int cpu_core_index_of_thread(int cpu); +int cpu_first_thread_of_core(int core); +#else +static inline int cpu_core_index_of_thread(int cpu) { return cpu; } +static inline int cpu_first_thread_of_core(int core) { return core; } +#endif + +static inline int cpu_thread_in_core(int cpu) +{ + return cpu & (threads_per_core - 1); +} + +static inline int cpu_thread_in_subcore(int cpu) +{ + return cpu & (threads_per_subcore - 1); +} + +static inline int cpu_first_thread_sibling(int cpu) +{ + return cpu & ~(threads_per_core - 1); +} + +static inline int cpu_last_thread_sibling(int cpu) +{ + return cpu | (threads_per_core - 1); +} + +/* + * tlb_thread_siblings are siblings which share a TLB. This is not + * architected, is not something a hypervisor could emulate and a future + * CPU may change behaviour even in compat mode, so this should only be + * used on PowerNV, and only with care. + */ +static inline int cpu_first_tlb_thread_sibling(int cpu) +{ + if (cpu_has_feature(CPU_FTR_ARCH_300) && (threads_per_core == 8)) + return cpu & ~0x6; /* Big Core */ + else + return cpu_first_thread_sibling(cpu); +} + +static inline int cpu_last_tlb_thread_sibling(int cpu) +{ + if (cpu_has_feature(CPU_FTR_ARCH_300) && (threads_per_core == 8)) + return cpu | 0x6; /* Big Core */ + else + return cpu_last_thread_sibling(cpu); +} + +static inline int cpu_tlb_thread_sibling_step(void) +{ + if (cpu_has_feature(CPU_FTR_ARCH_300) && (threads_per_core == 8)) + return 2; /* Big Core */ + else + return 1; +} + +static inline u32 get_tensr(void) +{ +#ifdef CONFIG_BOOKE + if (cpu_has_feature(CPU_FTR_SMT)) + return mfspr(SPRN_TENSR); +#endif + return 1; +} + +void book3e_start_thread(int thread, unsigned long addr); +void book3e_stop_thread(int thread); + +#endif /* __ASSEMBLY__ */ + +#define INVALID_THREAD_HWID 0x0fff + +#endif /* _ASM_POWERPC_CPUTHREADS_H */ + diff --git a/arch/powerpc/include/asm/cputime.h b/arch/powerpc/include/asm/cputime.h new file mode 100644 index 000000000..ed75d1c31 --- /dev/null +++ b/arch/powerpc/include/asm/cputime.h @@ -0,0 +1,100 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Definitions for measuring cputime on powerpc machines. + * + * Copyright (C) 2006 Paul Mackerras, IBM Corp. + * + * If we have CONFIG_VIRT_CPU_ACCOUNTING_NATIVE, we measure cpu time in + * the same units as the timebase. Otherwise we measure cpu time + * in jiffies using the generic definitions. + */ + +#ifndef __POWERPC_CPUTIME_H +#define __POWERPC_CPUTIME_H + +#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE + +#include <linux/types.h> +#include <linux/time.h> +#include <asm/div64.h> +#include <asm/time.h> +#include <asm/param.h> + +typedef u64 __nocast cputime_t; +typedef u64 __nocast cputime64_t; + +#define cmpxchg_cputime(ptr, old, new) cmpxchg(ptr, old, new) + +#ifdef __KERNEL__ +/* + * Convert cputime <-> microseconds + */ +extern u64 __cputime_usec_factor; + +static inline unsigned long cputime_to_usecs(const cputime_t ct) +{ + return mulhdu((__force u64) ct, __cputime_usec_factor); +} + +#define cputime_to_nsecs(cputime) tb_to_ns((__force u64)cputime) + +/* + * PPC64 uses PACA which is task independent for storing accounting data while + * PPC32 uses struct thread_info, therefore at task switch the accounting data + * has to be populated in the new task + */ +#ifdef CONFIG_PPC64 +#define get_accounting(tsk) (&get_paca()->accounting) +#define raw_get_accounting(tsk) (&local_paca->accounting) +static inline void arch_vtime_task_switch(struct task_struct *tsk) { } + +#else +#define get_accounting(tsk) (&task_thread_info(tsk)->accounting) +#define raw_get_accounting(tsk) get_accounting(tsk) +/* + * Called from the context switch with interrupts disabled, to charge all + * accumulated times to the current process, and to prepare accounting on + * the next process. + */ +static inline void arch_vtime_task_switch(struct task_struct *prev) +{ + struct cpu_accounting_data *acct = get_accounting(current); + struct cpu_accounting_data *acct0 = get_accounting(prev); + + acct->starttime = acct0->starttime; +} +#endif + +/* + * account_cpu_user_entry/exit runs "unreconciled", so can't trace, + * can't use get_paca() + */ +static notrace inline void account_cpu_user_entry(void) +{ + unsigned long tb = mftb(); + struct cpu_accounting_data *acct = raw_get_accounting(current); + + acct->utime += (tb - acct->starttime_user); + acct->starttime = tb; +} + +static notrace inline void account_cpu_user_exit(void) +{ + unsigned long tb = mftb(); + struct cpu_accounting_data *acct = raw_get_accounting(current); + + acct->stime += (tb - acct->starttime); + acct->starttime_user = tb; +} + + +#endif /* __KERNEL__ */ +#else /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */ +static inline void account_cpu_user_entry(void) +{ +} +static inline void account_cpu_user_exit(void) +{ +} +#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */ +#endif /* __POWERPC_CPUTIME_H */ diff --git a/arch/powerpc/include/asm/crashdump-ppc64.h b/arch/powerpc/include/asm/crashdump-ppc64.h new file mode 100644 index 000000000..68d9717cc --- /dev/null +++ b/arch/powerpc/include/asm/crashdump-ppc64.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef _ASM_POWERPC_CRASHDUMP_PPC64_H +#define _ASM_POWERPC_CRASHDUMP_PPC64_H + +/* + * Backup region - first 64KB of System RAM + * + * If ever the below macros are to be changed, please be judicious. + * The implicit assumptions are: + * - start, end & size are less than UINT32_MAX. + * - start & size are at least 8 byte aligned. + * + * For implementation details: arch/powerpc/purgatory/trampoline_64.S + */ +#define BACKUP_SRC_START 0 +#define BACKUP_SRC_END 0xffff +#define BACKUP_SRC_SIZE (BACKUP_SRC_END - BACKUP_SRC_START + 1) + +#endif /* __ASM_POWERPC_CRASHDUMP_PPC64_H */ diff --git a/arch/powerpc/include/asm/current.h b/arch/powerpc/include/asm/current.h new file mode 100644 index 000000000..bbfb94800 --- /dev/null +++ b/arch/powerpc/include/asm/current.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_CURRENT_H +#define _ASM_POWERPC_CURRENT_H +#ifdef __KERNEL__ + +/* + */ + +struct task_struct; + +#ifdef __powerpc64__ +#include <linux/stddef.h> +#include <asm/paca.h> + +static inline struct task_struct *get_current(void) +{ + struct task_struct *task; + + /* get_current can be cached by the compiler, so no volatile */ + asm ("ld %0,%1(13)" + : "=r" (task) + : "i" (offsetof(struct paca_struct, __current))); + + return task; +} +#define current get_current() + +#else + +/* + * We keep `current' in r2 for speed. + */ +register struct task_struct *current asm ("r2"); + +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_CURRENT_H */ diff --git a/arch/powerpc/include/asm/dbdma.h b/arch/powerpc/include/asm/dbdma.h new file mode 100644 index 000000000..4785c1716 --- /dev/null +++ b/arch/powerpc/include/asm/dbdma.h @@ -0,0 +1,109 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Definitions for using the Apple Descriptor-Based DMA controller + * in Power Macintosh computers. + * + * Copyright (C) 1996 Paul Mackerras. + */ + +#ifdef __KERNEL__ +#ifndef _ASM_DBDMA_H_ +#define _ASM_DBDMA_H_ +/* + * DBDMA control/status registers. All little-endian. + */ +struct dbdma_regs { + unsigned int control; /* lets you change bits in status */ + unsigned int status; /* DMA and device status bits (see below) */ + unsigned int cmdptr_hi; /* upper 32 bits of command address */ + unsigned int cmdptr; /* (lower 32 bits of) command address (phys) */ + unsigned int intr_sel; /* select interrupt condition bit */ + unsigned int br_sel; /* select branch condition bit */ + unsigned int wait_sel; /* select wait condition bit */ + unsigned int xfer_mode; + unsigned int data2ptr_hi; + unsigned int data2ptr; + unsigned int res1; + unsigned int address_hi; + unsigned int br_addr_hi; + unsigned int res2[3]; +}; + +/* Bits in control and status registers */ +#define RUN 0x8000 +#define PAUSE 0x4000 +#define FLUSH 0x2000 +#define WAKE 0x1000 +#define DEAD 0x0800 +#define ACTIVE 0x0400 +#define BT 0x0100 +#define DEVSTAT 0x00ff + +/* + * DBDMA command structure. These fields are all little-endian! + */ +struct dbdma_cmd { + __le16 req_count; /* requested byte transfer count */ + __le16 command; /* command word (has bit-fields) */ + __le32 phy_addr; /* physical data address */ + __le32 cmd_dep; /* command-dependent field */ + __le16 res_count; /* residual count after completion */ + __le16 xfer_status; /* transfer status */ +}; + +/* DBDMA command values in command field */ +#define OUTPUT_MORE 0 /* transfer memory data to stream */ +#define OUTPUT_LAST 0x1000 /* ditto followed by end marker */ +#define INPUT_MORE 0x2000 /* transfer stream data to memory */ +#define INPUT_LAST 0x3000 /* ditto, expect end marker */ +#define STORE_WORD 0x4000 /* write word (4 bytes) to device reg */ +#define LOAD_WORD 0x5000 /* read word (4 bytes) from device reg */ +#define DBDMA_NOP 0x6000 /* do nothing */ +#define DBDMA_STOP 0x7000 /* suspend processing */ + +/* Key values in command field */ +#define KEY_STREAM0 0 /* usual data stream */ +#define KEY_STREAM1 0x100 /* control/status stream */ +#define KEY_STREAM2 0x200 /* device-dependent stream */ +#define KEY_STREAM3 0x300 /* device-dependent stream */ +#define KEY_REGS 0x500 /* device register space */ +#define KEY_SYSTEM 0x600 /* system memory-mapped space */ +#define KEY_DEVICE 0x700 /* device memory-mapped space */ + +/* Interrupt control values in command field */ +#define INTR_NEVER 0 /* don't interrupt */ +#define INTR_IFSET 0x10 /* intr if condition bit is 1 */ +#define INTR_IFCLR 0x20 /* intr if condition bit is 0 */ +#define INTR_ALWAYS 0x30 /* always interrupt */ + +/* Branch control values in command field */ +#define BR_NEVER 0 /* don't branch */ +#define BR_IFSET 0x4 /* branch if condition bit is 1 */ +#define BR_IFCLR 0x8 /* branch if condition bit is 0 */ +#define BR_ALWAYS 0xc /* always branch */ + +/* Wait control values in command field */ +#define WAIT_NEVER 0 /* don't wait */ +#define WAIT_IFSET 1 /* wait if condition bit is 1 */ +#define WAIT_IFCLR 2 /* wait if condition bit is 0 */ +#define WAIT_ALWAYS 3 /* always wait */ + +/* Align an address for a DBDMA command structure */ +#define DBDMA_ALIGN(x) (((unsigned long)(x) + sizeof(struct dbdma_cmd) - 1) \ + & -sizeof(struct dbdma_cmd)) + +/* Useful macros */ +#define DBDMA_DO_STOP(regs) do { \ + out_le32(&((regs)->control), (RUN|FLUSH)<<16); \ + while(in_le32(&((regs)->status)) & (ACTIVE|FLUSH)) \ + ; \ +} while(0) + +#define DBDMA_DO_RESET(regs) do { \ + out_le32(&((regs)->control), (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);\ + while(in_le32(&((regs)->status)) & (RUN)) \ + ; \ +} while(0) + +#endif /* _ASM_DBDMA_H_ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/dbell.h b/arch/powerpc/include/asm/dbell.h new file mode 100644 index 000000000..3e9da22a2 --- /dev/null +++ b/arch/powerpc/include/asm/dbell.h @@ -0,0 +1,161 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2009 Freescale Semiconductor, Inc. + * + * provides masks and opcode images for use by code generation, emulation + * and for instructions that older assemblers might not know about + */ +#ifndef _ASM_POWERPC_DBELL_H +#define _ASM_POWERPC_DBELL_H + +#include <linux/smp.h> +#include <linux/threads.h> + +#include <asm/cputhreads.h> +#include <asm/ppc-opcode.h> +#include <asm/feature-fixups.h> +#include <asm/kvm_ppc.h> + +#define PPC_DBELL_MSG_BRDCAST (0x04000000) +#define PPC_DBELL_TYPE(x) (((x) & 0xf) << (63-36)) +#define PPC_DBELL_TYPE_MASK PPC_DBELL_TYPE(0xf) +#define PPC_DBELL_LPID(x) ((x) << (63 - 49)) +#define PPC_DBELL_PIR_MASK 0x3fff +enum ppc_dbell { + PPC_DBELL = 0, /* doorbell */ + PPC_DBELL_CRIT = 1, /* critical doorbell */ + PPC_G_DBELL = 2, /* guest doorbell */ + PPC_G_DBELL_CRIT = 3, /* guest critical doorbell */ + PPC_G_DBELL_MC = 4, /* guest mcheck doorbell */ + PPC_DBELL_SERVER = 5, /* doorbell on server */ +}; + +#ifdef CONFIG_PPC_BOOK3S + +#define PPC_DBELL_MSGTYPE PPC_DBELL_SERVER + +static inline void _ppc_msgsnd(u32 msg) +{ + __asm__ __volatile__ (ASM_FTR_IFSET(PPC_MSGSND(%1), PPC_MSGSNDP(%1), %0) + : : "i" (CPU_FTR_HVMODE), "r" (msg)); +} + +/* sync before sending message */ +static inline void ppc_msgsnd_sync(void) +{ + __asm__ __volatile__ ("sync" : : : "memory"); +} + +/* sync after taking message interrupt */ +static inline void ppc_msgsync(void) +{ + /* sync is not required when taking messages from the same core */ + __asm__ __volatile__ (ASM_FTR_IFSET(PPC_MSGSYNC " ; lwsync", "", %0) + : : "i" (CPU_FTR_HVMODE|CPU_FTR_ARCH_300)); +} + +static inline void _ppc_msgclr(u32 msg) +{ + __asm__ __volatile__ (ASM_FTR_IFSET(PPC_MSGCLR(%1), PPC_MSGCLRP(%1), %0) + : : "i" (CPU_FTR_HVMODE), "r" (msg)); +} + +static inline void ppc_msgclr(enum ppc_dbell type) +{ + u32 msg = PPC_DBELL_TYPE(type); + + _ppc_msgclr(msg); +} + +#else /* CONFIG_PPC_BOOK3S */ + +#define PPC_DBELL_MSGTYPE PPC_DBELL + +static inline void _ppc_msgsnd(u32 msg) +{ + __asm__ __volatile__ (PPC_MSGSND(%0) : : "r" (msg)); +} + +/* sync before sending message */ +static inline void ppc_msgsnd_sync(void) +{ + __asm__ __volatile__ ("sync" : : : "memory"); +} + +/* sync after taking message interrupt */ +static inline void ppc_msgsync(void) +{ +} + +#endif /* CONFIG_PPC_BOOK3S */ + +extern void doorbell_exception(struct pt_regs *regs); + +static inline void ppc_msgsnd(enum ppc_dbell type, u32 flags, u32 tag) +{ + u32 msg = PPC_DBELL_TYPE(type) | (flags & PPC_DBELL_MSG_BRDCAST) | + (tag & 0x07ffffff); + + _ppc_msgsnd(msg); +} + +#ifdef CONFIG_SMP + +/* + * Doorbells must only be used if CPU_FTR_DBELL is available. + * msgsnd is used in HV, and msgsndp is used in !HV. + * + * These should be used by platform code that is aware of restrictions. + * Other arch code should use ->cause_ipi. + * + * doorbell_global_ipi() sends a dbell to any target CPU. + * Must be used only by architectures that address msgsnd target + * by PIR/get_hard_smp_processor_id. + */ +static inline void doorbell_global_ipi(int cpu) +{ + u32 tag = get_hard_smp_processor_id(cpu); + + kvmppc_set_host_ipi(cpu); + /* Order previous accesses vs. msgsnd, which is treated as a store */ + ppc_msgsnd_sync(); + ppc_msgsnd(PPC_DBELL_MSGTYPE, 0, tag); +} + +/* + * doorbell_core_ipi() sends a dbell to a target CPU in the same core. + * Must be used only by architectures that address msgsnd target + * by TIR/cpu_thread_in_core. + */ +static inline void doorbell_core_ipi(int cpu) +{ + u32 tag = cpu_thread_in_core(cpu); + + kvmppc_set_host_ipi(cpu); + /* Order previous accesses vs. msgsnd, which is treated as a store */ + ppc_msgsnd_sync(); + ppc_msgsnd(PPC_DBELL_MSGTYPE, 0, tag); +} + +/* + * Attempt to cause a core doorbell if destination is on the same core. + * Returns 1 on success, 0 on failure. + */ +static inline int doorbell_try_core_ipi(int cpu) +{ + int this_cpu = get_cpu(); + int ret = 0; + + if (cpumask_test_cpu(cpu, cpu_sibling_mask(this_cpu))) { + doorbell_core_ipi(cpu); + ret = 1; + } + + put_cpu(); + + return ret; +} + +#endif /* CONFIG_SMP */ + +#endif /* _ASM_POWERPC_DBELL_H */ diff --git a/arch/powerpc/include/asm/dcr-generic.h b/arch/powerpc/include/asm/dcr-generic.h new file mode 100644 index 000000000..099c28dd4 --- /dev/null +++ b/arch/powerpc/include/asm/dcr-generic.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * <benh@kernel.crashing.org> + */ + +#ifndef _ASM_POWERPC_DCR_GENERIC_H +#define _ASM_POWERPC_DCR_GENERIC_H +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +enum host_type_t {DCR_HOST_MMIO, DCR_HOST_NATIVE, DCR_HOST_INVALID}; + +typedef struct { + enum host_type_t type; + union { + dcr_host_mmio_t mmio; + dcr_host_native_t native; + } host; +} dcr_host_t; + +extern bool dcr_map_ok_generic(dcr_host_t host); + +extern dcr_host_t dcr_map_generic(struct device_node *dev, unsigned int dcr_n, + unsigned int dcr_c); +extern void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c); + +extern u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n); + +extern void dcr_write_generic(dcr_host_t host, unsigned int dcr_n, u32 value); + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DCR_GENERIC_H */ + + diff --git a/arch/powerpc/include/asm/dcr-mmio.h b/arch/powerpc/include/asm/dcr-mmio.h new file mode 100644 index 000000000..fc6d93ef4 --- /dev/null +++ b/arch/powerpc/include/asm/dcr-mmio.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * <benh@kernel.crashing.org> + */ + +#ifndef _ASM_POWERPC_DCR_MMIO_H +#define _ASM_POWERPC_DCR_MMIO_H +#ifdef __KERNEL__ + +#include <asm/io.h> + +typedef struct { + void __iomem *token; + unsigned int stride; + unsigned int base; +} dcr_host_mmio_t; + +static inline bool dcr_map_ok_mmio(dcr_host_mmio_t host) +{ + return host.token != NULL; +} + +extern dcr_host_mmio_t dcr_map_mmio(struct device_node *dev, + unsigned int dcr_n, + unsigned int dcr_c); +extern void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int dcr_c); + +static inline u32 dcr_read_mmio(dcr_host_mmio_t host, unsigned int dcr_n) +{ + return in_be32(host.token + ((host.base + dcr_n) * host.stride)); +} + +static inline void dcr_write_mmio(dcr_host_mmio_t host, + unsigned int dcr_n, + u32 value) +{ + out_be32(host.token + ((host.base + dcr_n) * host.stride), value); +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DCR_MMIO_H */ + + diff --git a/arch/powerpc/include/asm/dcr-native.h b/arch/powerpc/include/asm/dcr-native.h new file mode 100644 index 000000000..a92059964 --- /dev/null +++ b/arch/powerpc/include/asm/dcr-native.h @@ -0,0 +1,144 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * <benh@kernel.crashing.org> + */ + +#ifndef _ASM_POWERPC_DCR_NATIVE_H +#define _ASM_POWERPC_DCR_NATIVE_H +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +#include <linux/spinlock.h> +#include <asm/cputable.h> +#include <asm/cpu_has_feature.h> +#include <linux/stringify.h> + +typedef struct { + unsigned int base; +} dcr_host_native_t; + +static inline bool dcr_map_ok_native(dcr_host_native_t host) +{ + return true; +} + +#define dcr_map_native(dev, dcr_n, dcr_c) \ + ((dcr_host_native_t){ .base = (dcr_n) }) +#define dcr_unmap_native(host, dcr_c) do {} while (0) +#define dcr_read_native(host, dcr_n) mfdcr(dcr_n + host.base) +#define dcr_write_native(host, dcr_n, value) mtdcr(dcr_n + host.base, value) + +/* Table based DCR accessors */ +extern void __mtdcr(unsigned int reg, unsigned int val); +extern unsigned int __mfdcr(unsigned int reg); + +/* mfdcrx/mtdcrx instruction based accessors. We hand code + * the opcodes in order not to depend on newer binutils + */ +static inline unsigned int mfdcrx(unsigned int reg) +{ + unsigned int ret; + asm volatile(".long 0x7c000206 | (%0 << 21) | (%1 << 16)" + : "=r" (ret) : "r" (reg)); + return ret; +} + +static inline void mtdcrx(unsigned int reg, unsigned int val) +{ + asm volatile(".long 0x7c000306 | (%0 << 21) | (%1 << 16)" + : : "r" (val), "r" (reg)); +} + +#define mfdcr(rn) \ + ({unsigned int rval; \ + if (__builtin_constant_p(rn) && rn < 1024) \ + asm volatile("mfdcr %0, %1" : "=r" (rval) \ + : "n" (rn)); \ + else if (likely(cpu_has_feature(CPU_FTR_INDEXED_DCR))) \ + rval = mfdcrx(rn); \ + else \ + rval = __mfdcr(rn); \ + rval;}) + +#define mtdcr(rn, v) \ +do { \ + if (__builtin_constant_p(rn) && rn < 1024) \ + asm volatile("mtdcr %0, %1" \ + : : "n" (rn), "r" (v)); \ + else if (likely(cpu_has_feature(CPU_FTR_INDEXED_DCR))) \ + mtdcrx(rn, v); \ + else \ + __mtdcr(rn, v); \ +} while (0) + +/* R/W of indirect DCRs make use of standard naming conventions for DCRs */ +extern spinlock_t dcr_ind_lock; + +static inline unsigned __mfdcri(int base_addr, int base_data, int reg) +{ + unsigned long flags; + unsigned int val; + + spin_lock_irqsave(&dcr_ind_lock, flags); + if (cpu_has_feature(CPU_FTR_INDEXED_DCR)) { + mtdcrx(base_addr, reg); + val = mfdcrx(base_data); + } else { + __mtdcr(base_addr, reg); + val = __mfdcr(base_data); + } + spin_unlock_irqrestore(&dcr_ind_lock, flags); + return val; +} + +static inline void __mtdcri(int base_addr, int base_data, int reg, + unsigned val) +{ + unsigned long flags; + + spin_lock_irqsave(&dcr_ind_lock, flags); + if (cpu_has_feature(CPU_FTR_INDEXED_DCR)) { + mtdcrx(base_addr, reg); + mtdcrx(base_data, val); + } else { + __mtdcr(base_addr, reg); + __mtdcr(base_data, val); + } + spin_unlock_irqrestore(&dcr_ind_lock, flags); +} + +static inline void __dcri_clrset(int base_addr, int base_data, int reg, + unsigned clr, unsigned set) +{ + unsigned long flags; + unsigned int val; + + spin_lock_irqsave(&dcr_ind_lock, flags); + if (cpu_has_feature(CPU_FTR_INDEXED_DCR)) { + mtdcrx(base_addr, reg); + val = (mfdcrx(base_data) & ~clr) | set; + mtdcrx(base_data, val); + } else { + __mtdcr(base_addr, reg); + val = (__mfdcr(base_data) & ~clr) | set; + __mtdcr(base_data, val); + } + spin_unlock_irqrestore(&dcr_ind_lock, flags); +} + +#define mfdcri(base, reg) __mfdcri(DCRN_ ## base ## _CONFIG_ADDR, \ + DCRN_ ## base ## _CONFIG_DATA, \ + reg) + +#define mtdcri(base, reg, data) __mtdcri(DCRN_ ## base ## _CONFIG_ADDR, \ + DCRN_ ## base ## _CONFIG_DATA, \ + reg, data) + +#define dcri_clrset(base, reg, clr, set) __dcri_clrset(DCRN_ ## base ## _CONFIG_ADDR, \ + DCRN_ ## base ## _CONFIG_DATA, \ + reg, clr, set) + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DCR_NATIVE_H */ diff --git a/arch/powerpc/include/asm/dcr-regs.h b/arch/powerpc/include/asm/dcr-regs.h new file mode 100644 index 000000000..5c1a4973f --- /dev/null +++ b/arch/powerpc/include/asm/dcr-regs.h @@ -0,0 +1,184 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Common DCR / SDR / CPR register definitions used on various IBM/AMCC + * 4xx processors + * + * Copyright 2007 Benjamin Herrenschmidt, IBM Corp + * <benh@kernel.crashing.org> + * + * Mostly lifted from asm-ppc/ibm4xx.h by + * + * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> + * + */ + +#ifndef __DCR_REGS_H__ +#define __DCR_REGS_H__ + +/* + * Most DCRs used for controlling devices such as the MAL, DMA engine, + * etc... are obtained for the device tree. + * + * The definitions in this files are fixed DCRs and indirect DCRs that + * are commonly used outside of specific drivers or refer to core + * common registers that may occasionally have to be tweaked outside + * of the driver main register set + */ + +/* CPRs (440GX and 440SP/440SPe) */ +#define DCRN_CPR0_CONFIG_ADDR 0xc +#define DCRN_CPR0_CONFIG_DATA 0xd + +/* SDRs (440GX and 440SP/440SPe) */ +#define DCRN_SDR0_CONFIG_ADDR 0xe +#define DCRN_SDR0_CONFIG_DATA 0xf + +#define SDR0_PFC0 0x4100 +#define SDR0_PFC1 0x4101 +#define SDR0_PFC1_EPS 0x1c00000 +#define SDR0_PFC1_EPS_SHIFT 22 +#define SDR0_PFC1_RMII 0x02000000 +#define SDR0_MFR 0x4300 +#define SDR0_MFR_TAH0 0x80000000 /* TAHOE0 Enable */ +#define SDR0_MFR_TAH1 0x40000000 /* TAHOE1 Enable */ +#define SDR0_MFR_PCM 0x10000000 /* PPC440GP irq compat mode */ +#define SDR0_MFR_ECS 0x08000000 /* EMAC int clk */ +#define SDR0_MFR_T0TXFL 0x00080000 +#define SDR0_MFR_T0TXFH 0x00040000 +#define SDR0_MFR_T1TXFL 0x00020000 +#define SDR0_MFR_T1TXFH 0x00010000 +#define SDR0_MFR_E0TXFL 0x00008000 +#define SDR0_MFR_E0TXFH 0x00004000 +#define SDR0_MFR_E0RXFL 0x00002000 +#define SDR0_MFR_E0RXFH 0x00001000 +#define SDR0_MFR_E1TXFL 0x00000800 +#define SDR0_MFR_E1TXFH 0x00000400 +#define SDR0_MFR_E1RXFL 0x00000200 +#define SDR0_MFR_E1RXFH 0x00000100 +#define SDR0_MFR_E2TXFL 0x00000080 +#define SDR0_MFR_E2TXFH 0x00000040 +#define SDR0_MFR_E2RXFL 0x00000020 +#define SDR0_MFR_E2RXFH 0x00000010 +#define SDR0_MFR_E3TXFL 0x00000008 +#define SDR0_MFR_E3TXFH 0x00000004 +#define SDR0_MFR_E3RXFL 0x00000002 +#define SDR0_MFR_E3RXFH 0x00000001 +#define SDR0_UART0 0x0120 +#define SDR0_UART1 0x0121 +#define SDR0_UART2 0x0122 +#define SDR0_UART3 0x0123 +#define SDR0_CUST0 0x4000 + +/* SDR for 405EZ */ +#define DCRN_SDR_ICINTSTAT 0x4510 +#define ICINTSTAT_ICRX 0x80000000 +#define ICINTSTAT_ICTX0 0x40000000 +#define ICINTSTAT_ICTX1 0x20000000 +#define ICINTSTAT_ICTX 0x60000000 + +/* SDRs (460EX/460GT) */ +#define SDR0_ETH_CFG 0x4103 +#define SDR0_ETH_CFG_ECS 0x00000100 /* EMAC int clk source */ + +/* + * All those DCR register addresses are offsets from the base address + * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is + * excluded here and configured in the device tree. + */ +#define DCRN_SRAM0_SB0CR 0x00 +#define DCRN_SRAM0_SB1CR 0x01 +#define DCRN_SRAM0_SB2CR 0x02 +#define DCRN_SRAM0_SB3CR 0x03 +#define SRAM_SBCR_BU_MASK 0x00000180 +#define SRAM_SBCR_BS_64KB 0x00000800 +#define SRAM_SBCR_BU_RO 0x00000080 +#define SRAM_SBCR_BU_RW 0x00000180 +#define DCRN_SRAM0_BEAR 0x04 +#define DCRN_SRAM0_BESR0 0x05 +#define DCRN_SRAM0_BESR1 0x06 +#define DCRN_SRAM0_PMEG 0x07 +#define DCRN_SRAM0_CID 0x08 +#define DCRN_SRAM0_REVID 0x09 +#define DCRN_SRAM0_DPC 0x0a +#define SRAM_DPC_ENABLE 0x80000000 + +/* + * All those DCR register addresses are offsets from the base address + * for the SRAM0 controller (e.g. 0x30 on 440GX). The base address is + * excluded here and configured in the device tree. + */ +#define DCRN_L2C0_CFG 0x00 +#define L2C_CFG_L2M 0x80000000 +#define L2C_CFG_ICU 0x40000000 +#define L2C_CFG_DCU 0x20000000 +#define L2C_CFG_DCW_MASK 0x1e000000 +#define L2C_CFG_TPC 0x01000000 +#define L2C_CFG_CPC 0x00800000 +#define L2C_CFG_FRAN 0x00200000 +#define L2C_CFG_SS_MASK 0x00180000 +#define L2C_CFG_SS_256 0x00000000 +#define L2C_CFG_CPIM 0x00040000 +#define L2C_CFG_TPIM 0x00020000 +#define L2C_CFG_LIM 0x00010000 +#define L2C_CFG_PMUX_MASK 0x00007000 +#define L2C_CFG_PMUX_SNP 0x00000000 +#define L2C_CFG_PMUX_IF 0x00001000 +#define L2C_CFG_PMUX_DF 0x00002000 +#define L2C_CFG_PMUX_DS 0x00003000 +#define L2C_CFG_PMIM 0x00000800 +#define L2C_CFG_TPEI 0x00000400 +#define L2C_CFG_CPEI 0x00000200 +#define L2C_CFG_NAM 0x00000100 +#define L2C_CFG_SMCM 0x00000080 +#define L2C_CFG_NBRM 0x00000040 +#define L2C_CFG_RDBW 0x00000008 /* only 460EX/GT */ +#define DCRN_L2C0_CMD 0x01 +#define L2C_CMD_CLR 0x80000000 +#define L2C_CMD_DIAG 0x40000000 +#define L2C_CMD_INV 0x20000000 +#define L2C_CMD_CCP 0x10000000 +#define L2C_CMD_CTE 0x08000000 +#define L2C_CMD_STRC 0x04000000 +#define L2C_CMD_STPC 0x02000000 +#define L2C_CMD_RPMC 0x01000000 +#define L2C_CMD_HCC 0x00800000 +#define DCRN_L2C0_ADDR 0x02 +#define DCRN_L2C0_DATA 0x03 +#define DCRN_L2C0_SR 0x04 +#define L2C_SR_CC 0x80000000 +#define L2C_SR_CPE 0x40000000 +#define L2C_SR_TPE 0x20000000 +#define L2C_SR_LRU 0x10000000 +#define L2C_SR_PCS 0x08000000 +#define DCRN_L2C0_REVID 0x05 +#define DCRN_L2C0_SNP0 0x06 +#define DCRN_L2C0_SNP1 0x07 +#define L2C_SNP_BA_MASK 0xffff0000 +#define L2C_SNP_SSR_MASK 0x0000f000 +#define L2C_SNP_SSR_32G 0x0000f000 +#define L2C_SNP_ESR 0x00000800 + +/* + * DCR register offsets for 440SP/440SPe I2O/DMA controller. + * The base address is configured in the device tree. + */ +#define DCRN_I2O0_IBAL 0x006 +#define DCRN_I2O0_IBAH 0x007 +#define I2O_REG_ENABLE 0x00000001 /* Enable I2O/DMA access */ + +/* 440SP/440SPe Software Reset DCR */ +#define DCRN_SDR0_SRST 0x0200 +#define DCRN_SDR0_SRST_I2ODMA (0x80000000 >> 15) /* Reset I2O/DMA */ + +/* 440SP/440SPe Memory Queue DCR offsets */ +#define DCRN_MQ0_XORBA 0x04 +#define DCRN_MQ0_CF2H 0x06 +#define DCRN_MQ0_CFBHL 0x0f +#define DCRN_MQ0_BAUH 0x10 + +/* HB/LL Paths Configuration Register */ +#define MQ0_CFBHL_TPLM 28 +#define MQ0_CFBHL_HBCL 23 +#define MQ0_CFBHL_POLY 15 + +#endif /* __DCR_REGS_H__ */ diff --git a/arch/powerpc/include/asm/dcr.h b/arch/powerpc/include/asm/dcr.h new file mode 100644 index 000000000..64030e3a1 --- /dev/null +++ b/arch/powerpc/include/asm/dcr.h @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * <benh@kernel.crashing.org> + */ + +#ifndef _ASM_POWERPC_DCR_H +#define _ASM_POWERPC_DCR_H +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ +#ifdef CONFIG_PPC_DCR + +#ifdef CONFIG_PPC_DCR_NATIVE +#include <asm/dcr-native.h> +#endif + +#ifdef CONFIG_PPC_DCR_MMIO +#include <asm/dcr-mmio.h> +#endif + + +/* Indirection layer for providing both NATIVE and MMIO support. */ + +#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) + +#include <asm/dcr-generic.h> + +#define DCR_MAP_OK(host) dcr_map_ok_generic(host) +#define dcr_map(dev, dcr_n, dcr_c) dcr_map_generic(dev, dcr_n, dcr_c) +#define dcr_unmap(host, dcr_c) dcr_unmap_generic(host, dcr_c) +#define dcr_read(host, dcr_n) dcr_read_generic(host, dcr_n) +#define dcr_write(host, dcr_n, value) dcr_write_generic(host, dcr_n, value) + +#else + +#ifdef CONFIG_PPC_DCR_NATIVE +typedef dcr_host_native_t dcr_host_t; +#define DCR_MAP_OK(host) dcr_map_ok_native(host) +#define dcr_map(dev, dcr_n, dcr_c) dcr_map_native(dev, dcr_n, dcr_c) +#define dcr_unmap(host, dcr_c) dcr_unmap_native(host, dcr_c) +#define dcr_read(host, dcr_n) dcr_read_native(host, dcr_n) +#define dcr_write(host, dcr_n, value) dcr_write_native(host, dcr_n, value) +#else +typedef dcr_host_mmio_t dcr_host_t; +#define DCR_MAP_OK(host) dcr_map_ok_mmio(host) +#define dcr_map(dev, dcr_n, dcr_c) dcr_map_mmio(dev, dcr_n, dcr_c) +#define dcr_unmap(host, dcr_c) dcr_unmap_mmio(host, dcr_c) +#define dcr_read(host, dcr_n) dcr_read_mmio(host, dcr_n) +#define dcr_write(host, dcr_n, value) dcr_write_mmio(host, dcr_n, value) +#endif + +#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */ + +/* + * additional helpers to read the DCR * base from the device-tree + */ +struct device_node; +extern unsigned int dcr_resource_start(const struct device_node *np, + unsigned int index); +extern unsigned int dcr_resource_len(const struct device_node *np, + unsigned int index); +#endif /* CONFIG_PPC_DCR */ +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DCR_H */ diff --git a/arch/powerpc/include/asm/debug.h b/arch/powerpc/include/asm/debug.h new file mode 100644 index 000000000..ec57daf87 --- /dev/null +++ b/arch/powerpc/include/asm/debug.h @@ -0,0 +1,59 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> + */ +#ifndef _ASM_POWERPC_DEBUG_H +#define _ASM_POWERPC_DEBUG_H + +#include <asm/hw_breakpoint.h> + +struct pt_regs; + +#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC_CORE) + +extern int (*__debugger)(struct pt_regs *regs); +extern int (*__debugger_ipi)(struct pt_regs *regs); +extern int (*__debugger_bpt)(struct pt_regs *regs); +extern int (*__debugger_sstep)(struct pt_regs *regs); +extern int (*__debugger_iabr_match)(struct pt_regs *regs); +extern int (*__debugger_break_match)(struct pt_regs *regs); +extern int (*__debugger_fault_handler)(struct pt_regs *regs); + +#define DEBUGGER_BOILERPLATE(__NAME) \ +static inline int __NAME(struct pt_regs *regs) \ +{ \ + if (unlikely(__ ## __NAME)) \ + return __ ## __NAME(regs); \ + return 0; \ +} + +DEBUGGER_BOILERPLATE(debugger) +DEBUGGER_BOILERPLATE(debugger_ipi) +DEBUGGER_BOILERPLATE(debugger_bpt) +DEBUGGER_BOILERPLATE(debugger_sstep) +DEBUGGER_BOILERPLATE(debugger_iabr_match) +DEBUGGER_BOILERPLATE(debugger_break_match) +DEBUGGER_BOILERPLATE(debugger_fault_handler) + +#else +static inline int debugger(struct pt_regs *regs) { return 0; } +static inline int debugger_ipi(struct pt_regs *regs) { return 0; } +static inline int debugger_bpt(struct pt_regs *regs) { return 0; } +static inline int debugger_sstep(struct pt_regs *regs) { return 0; } +static inline int debugger_iabr_match(struct pt_regs *regs) { return 0; } +static inline int debugger_break_match(struct pt_regs *regs) { return 0; } +static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; } +#endif + +void __set_breakpoint(int nr, struct arch_hw_breakpoint *brk); +bool ppc_breakpoint_available(void); +#ifdef CONFIG_PPC_ADV_DEBUG_REGS +extern void do_send_trap(struct pt_regs *regs, unsigned long address, + unsigned long error_code, int brkpt); +#else + +extern void do_break(struct pt_regs *regs, unsigned long address, + unsigned long error_code); +#endif + +#endif /* _ASM_POWERPC_DEBUG_H */ diff --git a/arch/powerpc/include/asm/debugfs.h b/arch/powerpc/include/asm/debugfs.h new file mode 100644 index 000000000..2c5c48571 --- /dev/null +++ b/arch/powerpc/include/asm/debugfs.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_DEBUGFS_H +#define _ASM_POWERPC_DEBUGFS_H + +/* + * Copyright 2017, Michael Ellerman, IBM Corporation. + */ + +#include <linux/debugfs.h> + +extern struct dentry *powerpc_debugfs_root; + +#endif /* _ASM_POWERPC_DEBUGFS_H */ diff --git a/arch/powerpc/include/asm/delay.h b/arch/powerpc/include/asm/delay.h new file mode 100644 index 000000000..51bb8c147 --- /dev/null +++ b/arch/powerpc/include/asm/delay.h @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_DELAY_H +#define _ASM_POWERPC_DELAY_H +#ifdef __KERNEL__ + +#include <linux/processor.h> +#include <asm/time.h> + +/* + * Copyright 1996, Paul Mackerras. + * Copyright (C) 2009 Freescale Semiconductor, Inc. All rights reserved. + * + * PPC64 Support added by Dave Engebretsen, Todd Inglett, Mike Corrigan, + * Anton Blanchard. + */ + +extern void __delay(unsigned long loops); +extern void udelay(unsigned long usecs); + +/* + * On shared processor machines the generic implementation of mdelay can + * result in large errors. While each iteration of the loop inside mdelay + * is supposed to take 1ms, the hypervisor could sleep our partition for + * longer (eg 10ms). With the right timing these errors can add up. + * + * Since there is no 32bit overflow issue on 64bit kernels, just call + * udelay directly. + */ +#ifdef CONFIG_PPC64 +#define mdelay(n) udelay((n) * 1000) +#endif + +/** + * spin_event_timeout - spin until a condition gets true or a timeout elapses + * @condition: a C expression to evalate + * @timeout: timeout, in microseconds + * @delay: the number of microseconds to delay between each evaluation of + * @condition + * + * The process spins until the condition evaluates to true (non-zero) or the + * timeout elapses. The return value of this macro is the value of + * @condition when the loop terminates. This allows you to determine the cause + * of the loop terminates. If the return value is zero, then you know a + * timeout has occurred. + * + * This primary purpose of this macro is to poll on a hardware register + * until a status bit changes. The timeout ensures that the loop still + * terminates even if the bit never changes. The delay is for devices that + * need a delay in between successive reads. + * + * gcc will optimize out the if-statement if @delay is a constant. + */ +#define spin_event_timeout(condition, timeout, delay) \ +({ \ + typeof(condition) __ret; \ + unsigned long __loops = tb_ticks_per_usec * timeout; \ + unsigned long __start = mftb(); \ + \ + if (delay) { \ + while (!(__ret = (condition)) && \ + (tb_ticks_since(__start) <= __loops)) \ + udelay(delay); \ + } else { \ + spin_begin(); \ + while (!(__ret = (condition)) && \ + (tb_ticks_since(__start) <= __loops)) \ + spin_cpu_relax(); \ + spin_end(); \ + } \ + if (!__ret) \ + __ret = (condition); \ + __ret; \ +}) + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DELAY_H */ diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h new file mode 100644 index 000000000..219559d65 --- /dev/null +++ b/arch/powerpc/include/asm/device.h @@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Arch specific extensions to struct device + */ +#ifndef _ASM_POWERPC_DEVICE_H +#define _ASM_POWERPC_DEVICE_H + +struct device_node; +#ifdef CONFIG_PPC64 +struct pci_dn; +struct iommu_table; +#endif + +/* + * Arch extensions to struct device. + * + * When adding fields, consider macio_add_one_device in + * drivers/macintosh/macio_asic.c + */ +struct dev_archdata { + /* + * These two used to be a union. However, with the hybrid ops we need + * both so here we store both a DMA offset for direct mappings and + * an iommu_table for remapped DMA. + */ + dma_addr_t dma_offset; + +#ifdef CONFIG_PPC64 + struct iommu_table *iommu_table_base; +#endif + +#ifdef CONFIG_PPC64 + struct pci_dn *pci_data; +#endif +#ifdef CONFIG_EEH + struct eeh_dev *edev; +#endif +#ifdef CONFIG_FAIL_IOMMU + int fail_iommu; +#endif +#ifdef CONFIG_CXL_BASE + struct cxl_context *cxl_ctx; +#endif +#ifdef CONFIG_PCI_IOV + void *iov_data; +#endif +}; + +struct pdev_archdata { + u64 dma_mask; +}; + +#endif /* _ASM_POWERPC_DEVICE_H */ diff --git a/arch/powerpc/include/asm/disassemble.h b/arch/powerpc/include/asm/disassemble.h new file mode 100644 index 000000000..8d2ebc36d --- /dev/null +++ b/arch/powerpc/include/asm/disassemble.h @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * + * Copyright IBM Corp. 2008 + * + * Authors: Hollis Blanchard <hollisb@us.ibm.com> + */ + +#ifndef __ASM_PPC_DISASSEMBLE_H__ +#define __ASM_PPC_DISASSEMBLE_H__ + +#include <linux/types.h> + +static inline unsigned int get_op(u32 inst) +{ + return inst >> 26; +} + +static inline unsigned int get_xop(u32 inst) +{ + return (inst >> 1) & 0x3ff; +} + +static inline unsigned int get_sprn(u32 inst) +{ + return ((inst >> 16) & 0x1f) | ((inst >> 6) & 0x3e0); +} + +static inline unsigned int get_dcrn(u32 inst) +{ + return ((inst >> 16) & 0x1f) | ((inst >> 6) & 0x3e0); +} + +static inline unsigned int get_tmrn(u32 inst) +{ + return ((inst >> 16) & 0x1f) | ((inst >> 6) & 0x3e0); +} + +static inline unsigned int get_rt(u32 inst) +{ + return (inst >> 21) & 0x1f; +} + +static inline unsigned int get_rs(u32 inst) +{ + return (inst >> 21) & 0x1f; +} + +static inline unsigned int get_ra(u32 inst) +{ + return (inst >> 16) & 0x1f; +} + +static inline unsigned int get_rb(u32 inst) +{ + return (inst >> 11) & 0x1f; +} + +static inline unsigned int get_rc(u32 inst) +{ + return inst & 0x1; +} + +static inline unsigned int get_ws(u32 inst) +{ + return (inst >> 11) & 0x1f; +} + +static inline unsigned int get_d(u32 inst) +{ + return inst & 0xffff; +} + +static inline unsigned int get_oc(u32 inst) +{ + return (inst >> 11) & 0x7fff; +} + +static inline unsigned int get_tx_or_sx(u32 inst) +{ + return (inst) & 0x1; +} + +#define IS_XFORM(inst) (get_op(inst) == 31) +#define IS_DSFORM(inst) (get_op(inst) >= 56) + +/* + * Create a DSISR value from the instruction + */ +static inline unsigned make_dsisr(unsigned instr) +{ + unsigned dsisr; + + + /* bits 6:15 --> 22:31 */ + dsisr = (instr & 0x03ff0000) >> 16; + + if (IS_XFORM(instr)) { + /* bits 29:30 --> 15:16 */ + dsisr |= (instr & 0x00000006) << 14; + /* bit 25 --> 17 */ + dsisr |= (instr & 0x00000040) << 8; + /* bits 21:24 --> 18:21 */ + dsisr |= (instr & 0x00000780) << 3; + } else { + /* bit 5 --> 17 */ + dsisr |= (instr & 0x04000000) >> 12; + /* bits 1: 4 --> 18:21 */ + dsisr |= (instr & 0x78000000) >> 17; + /* bits 30:31 --> 12:13 */ + if (IS_DSFORM(instr)) + dsisr |= (instr & 0x00000003) << 18; + } + + return dsisr; +} +#endif /* __ASM_PPC_DISASSEMBLE_H__ */ diff --git a/arch/powerpc/include/asm/dma-direct.h b/arch/powerpc/include/asm/dma-direct.h new file mode 100644 index 000000000..128304cbe --- /dev/null +++ b/arch/powerpc/include/asm/dma-direct.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef ASM_POWERPC_DMA_DIRECT_H +#define ASM_POWERPC_DMA_DIRECT_H 1 + +static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) +{ + return paddr + dev->archdata.dma_offset; +} + +static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr) +{ + return daddr - dev->archdata.dma_offset; +} +#endif /* ASM_POWERPC_DMA_DIRECT_H */ diff --git a/arch/powerpc/include/asm/dma.h b/arch/powerpc/include/asm/dma.h new file mode 100644 index 000000000..6161a9596 --- /dev/null +++ b/arch/powerpc/include/asm/dma.h @@ -0,0 +1,350 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_DMA_H +#define _ASM_POWERPC_DMA_H +#ifdef __KERNEL__ + +/* + * Defines for using and allocating dma channels. + * Written by Hennus Bergman, 1992. + * High DMA channel support & info by Hannu Savolainen + * and John Boyd, Nov. 1992. + * Changes for ppc sound by Christoph Nadig + */ + +/* + * Note: Adapted for PowerPC by Gary Thomas + * Modified by Cort Dougan <cort@cs.nmt.edu> + * + * None of this really applies for Power Macintoshes. There is + * basically just enough here to get kernel/dma.c to compile. + */ + +#include <asm/io.h> +#include <linux/spinlock.h> + +#ifndef MAX_DMA_CHANNELS +#define MAX_DMA_CHANNELS 8 +#endif + +/* The maximum address that we can perform a DMA transfer to on this platform */ +/* Doesn't really apply... */ +#define MAX_DMA_ADDRESS (~0UL) + +#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER +#define dma_outb outb_p +#else +#define dma_outb outb +#endif + +#define dma_inb inb + +/* + * NOTES about DMA transfers: + * + * controller 1: channels 0-3, byte operations, ports 00-1F + * controller 2: channels 4-7, word operations, ports C0-DF + * + * - ALL registers are 8 bits only, regardless of transfer size + * - channel 4 is not used - cascades 1 into 2. + * - channels 0-3 are byte - addresses/counts are for physical bytes + * - channels 5-7 are word - addresses/counts are for physical words + * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries + * - transfer count loaded to registers is 1 less than actual count + * - controller 2 offsets are all even (2x offsets for controller 1) + * - page registers for 5-7 don't use data bit 0, represent 128K pages + * - page registers for 0-3 use bit 0, represent 64K pages + * + * On CHRP, the W83C553F (and VLSI Tollgate?) support full 32 bit addressing. + * Note that addresses loaded into registers must be _physical_ addresses, + * not logical addresses (which may differ if paging is active). + * + * Address mapping for channels 0-3: + * + * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses) + * | ... | | ... | | ... | + * | ... | | ... | | ... | + * | ... | | ... | | ... | + * P7 ... P0 A7 ... A0 A7 ... A0 + * | Page | Addr MSB | Addr LSB | (DMA registers) + * + * Address mapping for channels 5-7: + * + * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses) + * | ... | \ \ ... \ \ \ ... \ \ + * | ... | \ \ ... \ \ \ ... \ (not used) + * | ... | \ \ ... \ \ \ ... \ + * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0 + * | Page | Addr MSB | Addr LSB | (DMA registers) + * + * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses + * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at + * the hardware level, so odd-byte transfers aren't possible). + * + * Transfer count (_not # bytes_) is limited to 64K, represented as actual + * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more, + * and up to 128K bytes may be transferred on channels 5-7 in one operation. + * + */ + +/* 8237 DMA controllers */ +#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */ +#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */ + +/* DMA controller registers */ +#define DMA1_CMD_REG 0x08 /* command register (w) */ +#define DMA1_STAT_REG 0x08 /* status register (r) */ +#define DMA1_REQ_REG 0x09 /* request register (w) */ +#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */ +#define DMA1_MODE_REG 0x0B /* mode register (w) */ +#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */ +#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */ +#define DMA1_RESET_REG 0x0D /* Master Clear (w) */ +#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */ +#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */ + +#define DMA2_CMD_REG 0xD0 /* command register (w) */ +#define DMA2_STAT_REG 0xD0 /* status register (r) */ +#define DMA2_REQ_REG 0xD2 /* request register (w) */ +#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */ +#define DMA2_MODE_REG 0xD6 /* mode register (w) */ +#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */ +#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */ +#define DMA2_RESET_REG 0xDA /* Master Clear (w) */ +#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */ +#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */ + +#define DMA_ADDR_0 0x00 /* DMA address registers */ +#define DMA_ADDR_1 0x02 +#define DMA_ADDR_2 0x04 +#define DMA_ADDR_3 0x06 +#define DMA_ADDR_4 0xC0 +#define DMA_ADDR_5 0xC4 +#define DMA_ADDR_6 0xC8 +#define DMA_ADDR_7 0xCC + +#define DMA_CNT_0 0x01 /* DMA count registers */ +#define DMA_CNT_1 0x03 +#define DMA_CNT_2 0x05 +#define DMA_CNT_3 0x07 +#define DMA_CNT_4 0xC2 +#define DMA_CNT_5 0xC6 +#define DMA_CNT_6 0xCA +#define DMA_CNT_7 0xCE + +#define DMA_LO_PAGE_0 0x87 /* DMA page registers */ +#define DMA_LO_PAGE_1 0x83 +#define DMA_LO_PAGE_2 0x81 +#define DMA_LO_PAGE_3 0x82 +#define DMA_LO_PAGE_5 0x8B +#define DMA_LO_PAGE_6 0x89 +#define DMA_LO_PAGE_7 0x8A + +#define DMA_HI_PAGE_0 0x487 /* DMA page registers */ +#define DMA_HI_PAGE_1 0x483 +#define DMA_HI_PAGE_2 0x481 +#define DMA_HI_PAGE_3 0x482 +#define DMA_HI_PAGE_5 0x48B +#define DMA_HI_PAGE_6 0x489 +#define DMA_HI_PAGE_7 0x48A + +#define DMA1_EXT_REG 0x40B +#define DMA2_EXT_REG 0x4D6 + +#ifndef __powerpc64__ + /* in arch/powerpc/kernel/setup_32.c -- Cort */ + extern unsigned int DMA_MODE_WRITE; + extern unsigned int DMA_MODE_READ; +#else + #define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */ + #define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */ +#endif + +#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */ + +#define DMA_AUTOINIT 0x10 + +extern spinlock_t dma_spin_lock; + +static __inline__ unsigned long claim_dma_lock(void) +{ + unsigned long flags; + spin_lock_irqsave(&dma_spin_lock, flags); + return flags; +} + +static __inline__ void release_dma_lock(unsigned long flags) +{ + spin_unlock_irqrestore(&dma_spin_lock, flags); +} + +/* enable/disable a specific DMA channel */ +static __inline__ void enable_dma(unsigned int dmanr) +{ + unsigned char ucDmaCmd = 0x00; + + if (dmanr != 4) { + dma_outb(0, DMA2_MASK_REG); /* This may not be enabled */ + dma_outb(ucDmaCmd, DMA2_CMD_REG); /* Enable group */ + } + if (dmanr <= 3) { + dma_outb(dmanr, DMA1_MASK_REG); + dma_outb(ucDmaCmd, DMA1_CMD_REG); /* Enable group */ + } else { + dma_outb(dmanr & 3, DMA2_MASK_REG); + } +} + +static __inline__ void disable_dma(unsigned int dmanr) +{ + if (dmanr <= 3) + dma_outb(dmanr | 4, DMA1_MASK_REG); + else + dma_outb((dmanr & 3) | 4, DMA2_MASK_REG); +} + +/* Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + * Use this once to initialize the FF to a known state. + * After that, keep track of it. :-) + * --- In order to do that, the DMA routines below should --- + * --- only be used while interrupts are disabled! --- + */ +static __inline__ void clear_dma_ff(unsigned int dmanr) +{ + if (dmanr <= 3) + dma_outb(0, DMA1_CLEAR_FF_REG); + else + dma_outb(0, DMA2_CLEAR_FF_REG); +} + +/* set mode (above) for a specific DMA channel */ +static __inline__ void set_dma_mode(unsigned int dmanr, char mode) +{ + if (dmanr <= 3) + dma_outb(mode | dmanr, DMA1_MODE_REG); + else + dma_outb(mode | (dmanr & 3), DMA2_MODE_REG); +} + +/* Set only the page register bits of the transfer address. + * This is used for successive transfers when we know the contents of + * the lower 16 bits of the DMA current address register, but a 64k boundary + * may have been crossed. + */ +static __inline__ void set_dma_page(unsigned int dmanr, int pagenr) +{ + switch (dmanr) { + case 0: + dma_outb(pagenr, DMA_LO_PAGE_0); + dma_outb(pagenr >> 8, DMA_HI_PAGE_0); + break; + case 1: + dma_outb(pagenr, DMA_LO_PAGE_1); + dma_outb(pagenr >> 8, DMA_HI_PAGE_1); + break; + case 2: + dma_outb(pagenr, DMA_LO_PAGE_2); + dma_outb(pagenr >> 8, DMA_HI_PAGE_2); + break; + case 3: + dma_outb(pagenr, DMA_LO_PAGE_3); + dma_outb(pagenr >> 8, DMA_HI_PAGE_3); + break; + case 5: + dma_outb(pagenr & 0xfe, DMA_LO_PAGE_5); + dma_outb(pagenr >> 8, DMA_HI_PAGE_5); + break; + case 6: + dma_outb(pagenr & 0xfe, DMA_LO_PAGE_6); + dma_outb(pagenr >> 8, DMA_HI_PAGE_6); + break; + case 7: + dma_outb(pagenr & 0xfe, DMA_LO_PAGE_7); + dma_outb(pagenr >> 8, DMA_HI_PAGE_7); + break; + } +} + +/* Set transfer address & page bits for specific DMA channel. + * Assumes dma flipflop is clear. + */ +static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int phys) +{ + if (dmanr <= 3) { + dma_outb(phys & 0xff, + ((dmanr & 3) << 1) + IO_DMA1_BASE); + dma_outb((phys >> 8) & 0xff, + ((dmanr & 3) << 1) + IO_DMA1_BASE); + } else { + dma_outb((phys >> 1) & 0xff, + ((dmanr & 3) << 2) + IO_DMA2_BASE); + dma_outb((phys >> 9) & 0xff, + ((dmanr & 3) << 2) + IO_DMA2_BASE); + } + set_dma_page(dmanr, phys >> 16); +} + + +/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for + * a specific DMA channel. + * You must ensure the parameters are valid. + * NOTE: from a manual: "the number of transfers is one more + * than the initial word count"! This is taken into account. + * Assumes dma flip-flop is clear. + * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7. + */ +static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) +{ + count--; + if (dmanr <= 3) { + dma_outb(count & 0xff, + ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE); + dma_outb((count >> 8) & 0xff, + ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE); + } else { + dma_outb((count >> 1) & 0xff, + ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE); + dma_outb((count >> 9) & 0xff, + ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE); + } +} + + +/* Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * If called before the channel has been used, it may return 1. + * Otherwise, it returns the number of _bytes_ left to transfer. + * + * Assumes DMA flip-flop is clear. + */ +static __inline__ int get_dma_residue(unsigned int dmanr) +{ + unsigned int io_port = (dmanr <= 3) + ? ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE + : ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE; + + /* using short to get 16-bit wrap around */ + unsigned short count; + + count = 1 + dma_inb(io_port); + count += dma_inb(io_port) << 8; + + return (dmanr <= 3) ? count : (count << 1); +} + +/* These are in kernel/dma.c: */ + +/* reserve a DMA channel */ +extern int request_dma(unsigned int dmanr, const char *device_id); +/* release it again */ +extern void free_dma(unsigned int dmanr); + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DMA_H */ diff --git a/arch/powerpc/include/asm/drmem.h b/arch/powerpc/include/asm/drmem.h new file mode 100644 index 000000000..bf2402fed --- /dev/null +++ b/arch/powerpc/include/asm/drmem.h @@ -0,0 +1,121 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * drmem.h: Power specific logical memory block representation + * + * Copyright 2017 IBM Corporation + */ + +#ifndef _ASM_POWERPC_LMB_H +#define _ASM_POWERPC_LMB_H + +#include <linux/sched.h> + +struct drmem_lmb { + u64 base_addr; + u32 drc_index; + u32 aa_index; + u32 flags; +}; + +struct drmem_lmb_info { + struct drmem_lmb *lmbs; + int n_lmbs; + u64 lmb_size; +}; + +extern struct drmem_lmb_info *drmem_info; + +static inline struct drmem_lmb *drmem_lmb_next(struct drmem_lmb *lmb, + const struct drmem_lmb *start) +{ + /* + * DLPAR code paths can take several milliseconds per element + * when interacting with firmware. Ensure that we don't + * unfairly monopolize the CPU. + */ + if (((++lmb - start) % 16) == 0) + cond_resched(); + + return lmb; +} + +#define for_each_drmem_lmb_in_range(lmb, start, end) \ + for ((lmb) = (start); (lmb) < (end); lmb = drmem_lmb_next(lmb, start)) + +#define for_each_drmem_lmb(lmb) \ + for_each_drmem_lmb_in_range((lmb), \ + &drmem_info->lmbs[0], \ + &drmem_info->lmbs[drmem_info->n_lmbs]) + +/* + * The of_drconf_cell_v1 struct defines the layout of the LMB data + * specified in the ibm,dynamic-memory device tree property. + * The property itself is a 32-bit value specifying the number of + * LMBs followed by an array of of_drconf_cell_v1 entries, one + * per LMB. + */ +struct of_drconf_cell_v1 { + __be64 base_addr; + __be32 drc_index; + __be32 reserved; + __be32 aa_index; + __be32 flags; +}; + +/* + * Version 2 of the ibm,dynamic-memory property is defined as a + * 32-bit value specifying the number of LMB sets followed by an + * array of of_drconf_cell_v2 entries, one per LMB set. + */ +struct of_drconf_cell_v2 { + u32 seq_lmbs; + u64 base_addr; + u32 drc_index; + u32 aa_index; + u32 flags; +} __packed; + +#define DRCONF_MEM_ASSIGNED 0x00000008 +#define DRCONF_MEM_AI_INVALID 0x00000040 +#define DRCONF_MEM_RESERVED 0x00000080 +#define DRCONF_MEM_HOTREMOVABLE 0x00000100 + +static inline u64 drmem_lmb_size(void) +{ + return drmem_info->lmb_size; +} + +#define DRMEM_LMB_RESERVED 0x80000000 + +static inline void drmem_mark_lmb_reserved(struct drmem_lmb *lmb) +{ + lmb->flags |= DRMEM_LMB_RESERVED; +} + +static inline void drmem_remove_lmb_reservation(struct drmem_lmb *lmb) +{ + lmb->flags &= ~DRMEM_LMB_RESERVED; +} + +static inline bool drmem_lmb_reserved(struct drmem_lmb *lmb) +{ + return lmb->flags & DRMEM_LMB_RESERVED; +} + +u64 drmem_lmb_memory_max(void); +int walk_drmem_lmbs(struct device_node *dn, void *data, + int (*func)(struct drmem_lmb *, const __be32 **, void *)); +int drmem_update_dt(void); + +#ifdef CONFIG_PPC_PSERIES +int __init +walk_drmem_lmbs_early(unsigned long node, void *data, + int (*func)(struct drmem_lmb *, const __be32 **, void *)); +#endif + +static inline void invalidate_lmb_associativity_index(struct drmem_lmb *lmb) +{ + lmb->aa_index = 0xffffffff; +} + +#endif /* _ASM_POWERPC_LMB_H */ diff --git a/arch/powerpc/include/asm/dt_cpu_ftrs.h b/arch/powerpc/include/asm/dt_cpu_ftrs.h new file mode 100644 index 000000000..0c729e2d0 --- /dev/null +++ b/arch/powerpc/include/asm/dt_cpu_ftrs.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_POWERPC_DT_CPU_FTRS_H +#define __ASM_POWERPC_DT_CPU_FTRS_H + +/* + * Copyright 2017, IBM Corporation + * cpufeatures is the new way to discover CPU features with /cpus/features + * devicetree. This supersedes PVR based discovery ("cputable"), and older + * device tree feature advertisement. + */ + +#include <linux/types.h> +#include <uapi/asm/cputable.h> + +#ifdef CONFIG_PPC_DT_CPU_FTRS +bool dt_cpu_ftrs_init(void *fdt); +void dt_cpu_ftrs_scan(void); +bool dt_cpu_ftrs_in_use(void); +#else +static inline bool dt_cpu_ftrs_init(void *fdt) { return false; } +static inline void dt_cpu_ftrs_scan(void) { } +static inline bool dt_cpu_ftrs_in_use(void) { return false; } +#endif + +#endif /* __ASM_POWERPC_DT_CPU_FTRS_H */ diff --git a/arch/powerpc/include/asm/dtl.h b/arch/powerpc/include/asm/dtl.h new file mode 100644 index 000000000..1625888f2 --- /dev/null +++ b/arch/powerpc/include/asm/dtl.h @@ -0,0 +1,52 @@ +#ifndef _ASM_POWERPC_DTL_H +#define _ASM_POWERPC_DTL_H + +#include <asm/lppaca.h> +#include <linux/spinlock_types.h> + +/* + * Layout of entries in the hypervisor's dispatch trace log buffer. + */ +struct dtl_entry { + u8 dispatch_reason; + u8 preempt_reason; + __be16 processor_id; + __be32 enqueue_to_dispatch_time; + __be32 ready_to_enqueue_time; + __be32 waiting_to_ready_time; + __be64 timebase; + __be64 fault_addr; + __be64 srr0; + __be64 srr1; +}; + +#define DISPATCH_LOG_BYTES 4096 /* bytes per cpu */ +#define N_DISPATCH_LOG (DISPATCH_LOG_BYTES / sizeof(struct dtl_entry)) + +/* + * Dispatch trace log event enable mask: + * 0x1: voluntary virtual processor waits + * 0x2: time-slice preempts + * 0x4: virtual partition memory page faults + */ +#define DTL_LOG_CEDE 0x1 +#define DTL_LOG_PREEMPT 0x2 +#define DTL_LOG_FAULT 0x4 +#define DTL_LOG_ALL (DTL_LOG_CEDE | DTL_LOG_PREEMPT | DTL_LOG_FAULT) + +extern struct kmem_cache *dtl_cache; +extern rwlock_t dtl_access_lock; + +/* + * When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE = y, the cpu accounting code controls + * reading from the dispatch trace log. If other code wants to consume + * DTL entries, it can set this pointer to a function that will get + * called once for each DTL entry that gets processed. + */ +extern void (*dtl_consumer)(struct dtl_entry *entry, u64 index); + +extern void register_dtl_buffer(int cpu); +extern void alloc_dtl_buffers(unsigned long *time_limit); +extern long hcall_vphn(unsigned long cpu, u64 flags, __be32 *associativity); + +#endif /* _ASM_POWERPC_DTL_H */ diff --git a/arch/powerpc/include/asm/edac.h b/arch/powerpc/include/asm/edac.h new file mode 100644 index 000000000..5571e23d2 --- /dev/null +++ b/arch/powerpc/include/asm/edac.h @@ -0,0 +1,40 @@ +/* + * PPC EDAC common defs + * + * Author: Dave Jiang <djiang@mvista.com> + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef ASM_EDAC_H +#define ASM_EDAC_H +/* + * ECC atomic, DMA, SMP and interrupt safe scrub function. + * Implements the per arch edac_atomic_scrub() that EDAC use for software + * ECC scrubbing. It reads memory and then writes back the original + * value, allowing the hardware to detect and correct memory errors. + */ +static __inline__ void edac_atomic_scrub(void *va, u32 size) +{ + unsigned int *virt_addr = va; + unsigned int temp; + unsigned int i; + + for (i = 0; i < size / sizeof(*virt_addr); i++, virt_addr++) { + /* Very carefully read and write to memory atomically + * so we are interrupt, DMA and SMP safe. + */ + __asm__ __volatile__ ("\n\ + 1: lwarx %0,0,%1\n\ + stwcx. %0,0,%1\n\ + bne- 1b\n\ + isync" + : "=&r"(temp) + : "r"(virt_addr) + : "cr0", "memory"); + } +} + +#endif diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h new file mode 100644 index 000000000..b1a5bba2e --- /dev/null +++ b/arch/powerpc/include/asm/eeh.h @@ -0,0 +1,467 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation. + * Copyright 2001-2012 IBM Corporation. + */ + +#ifndef _POWERPC_EEH_H +#define _POWERPC_EEH_H +#ifdef __KERNEL__ + +#include <linux/init.h> +#include <linux/list.h> +#include <linux/string.h> +#include <linux/time.h> +#include <linux/atomic.h> + +#include <uapi/asm/eeh.h> + +struct pci_dev; +struct pci_bus; +struct pci_dn; + +#ifdef CONFIG_EEH + +/* EEH subsystem flags */ +#define EEH_ENABLED 0x01 /* EEH enabled */ +#define EEH_FORCE_DISABLED 0x02 /* EEH disabled */ +#define EEH_PROBE_MODE_DEV 0x04 /* From PCI device */ +#define EEH_PROBE_MODE_DEVTREE 0x08 /* From device tree */ +#define EEH_ENABLE_IO_FOR_LOG 0x20 /* Enable IO for log */ +#define EEH_EARLY_DUMP_LOG 0x40 /* Dump log immediately */ + +/* + * Delay for PE reset, all in ms + * + * PCI specification has reset hold time of 100 milliseconds. + * We have 250 milliseconds here. The PCI bus settlement time + * is specified as 1.5 seconds and we have 1.8 seconds. + */ +#define EEH_PE_RST_HOLD_TIME 250 +#define EEH_PE_RST_SETTLE_TIME 1800 + +/* + * The struct is used to trace PE related EEH functionality. + * In theory, there will have one instance of the struct to + * be created against particular PE. In nature, PEs correlate + * to each other. the struct has to reflect that hierarchy in + * order to easily pick up those affected PEs when one particular + * PE has EEH errors. + * + * Also, one particular PE might be composed of PCI device, PCI + * bus and its subordinate components. The struct also need ship + * the information. Further more, one particular PE is only meaingful + * in the corresponding PHB. Therefore, the root PEs should be created + * against existing PHBs in on-to-one fashion. + */ +#define EEH_PE_INVALID (1 << 0) /* Invalid */ +#define EEH_PE_PHB (1 << 1) /* PHB PE */ +#define EEH_PE_DEVICE (1 << 2) /* Device PE */ +#define EEH_PE_BUS (1 << 3) /* Bus PE */ +#define EEH_PE_VF (1 << 4) /* VF PE */ + +#define EEH_PE_ISOLATED (1 << 0) /* Isolated PE */ +#define EEH_PE_RECOVERING (1 << 1) /* Recovering PE */ +#define EEH_PE_CFG_BLOCKED (1 << 2) /* Block config access */ +#define EEH_PE_RESET (1 << 3) /* PE reset in progress */ + +#define EEH_PE_KEEP (1 << 8) /* Keep PE on hotplug */ +#define EEH_PE_CFG_RESTRICTED (1 << 9) /* Block config on error */ +#define EEH_PE_REMOVED (1 << 10) /* Removed permanently */ +#define EEH_PE_PRI_BUS (1 << 11) /* Cached primary bus */ + +struct eeh_pe { + int type; /* PE type: PHB/Bus/Device */ + int state; /* PE EEH dependent mode */ + int addr; /* PE configuration address */ + struct pci_controller *phb; /* Associated PHB */ + struct pci_bus *bus; /* Top PCI bus for bus PE */ + int check_count; /* Times of ignored error */ + int freeze_count; /* Times of froze up */ + time64_t tstamp; /* Time on first-time freeze */ + int false_positives; /* Times of reported #ff's */ + atomic_t pass_dev_cnt; /* Count of passed through devs */ + struct eeh_pe *parent; /* Parent PE */ + void *data; /* PE auxillary data */ + struct list_head child_list; /* List of PEs below this PE */ + struct list_head child; /* Memb. child_list/eeh_phb_pe */ + struct list_head edevs; /* List of eeh_dev in this PE */ + +#ifdef CONFIG_STACKTRACE + /* + * Saved stack trace. When we find a PE freeze in eeh_dev_check_failure + * the stack trace is saved here so we can print it in the recovery + * thread if it turns out to due to a real problem rather than + * a hot-remove. + * + * A max of 64 entries might be overkill, but it also might not be. + */ + unsigned long stack_trace[64]; + int trace_entries; +#endif /* CONFIG_STACKTRACE */ +}; + +#define eeh_pe_for_each_dev(pe, edev, tmp) \ + list_for_each_entry_safe(edev, tmp, &pe->edevs, entry) + +#define eeh_for_each_pe(root, pe) \ + for (pe = root; pe; pe = eeh_pe_next(pe, root)) + +static inline bool eeh_pe_passed(struct eeh_pe *pe) +{ + return pe ? !!atomic_read(&pe->pass_dev_cnt) : false; +} + +/* + * The struct is used to trace EEH state for the associated + * PCI device node or PCI device. In future, it might + * represent PE as well so that the EEH device to form + * another tree except the currently existing tree of PCI + * buses and PCI devices + */ +#define EEH_DEV_BRIDGE (1 << 0) /* PCI bridge */ +#define EEH_DEV_ROOT_PORT (1 << 1) /* PCIe root port */ +#define EEH_DEV_DS_PORT (1 << 2) /* Downstream port */ +#define EEH_DEV_IRQ_DISABLED (1 << 3) /* Interrupt disabled */ +#define EEH_DEV_DISCONNECTED (1 << 4) /* Removing from PE */ + +#define EEH_DEV_NO_HANDLER (1 << 8) /* No error handler */ +#define EEH_DEV_SYSFS (1 << 9) /* Sysfs created */ +#define EEH_DEV_REMOVED (1 << 10) /* Removed permanently */ + +struct eeh_dev { + int mode; /* EEH mode */ + int bdfn; /* bdfn of device (for cfg ops) */ + struct pci_controller *controller; + int pe_config_addr; /* PE config address */ + u32 config_space[16]; /* Saved PCI config space */ + int pcix_cap; /* Saved PCIx capability */ + int pcie_cap; /* Saved PCIe capability */ + int aer_cap; /* Saved AER capability */ + int af_cap; /* Saved AF capability */ + struct eeh_pe *pe; /* Associated PE */ + struct list_head entry; /* Membership in eeh_pe.edevs */ + struct list_head rmv_entry; /* Membership in rmv_list */ + struct pci_dn *pdn; /* Associated PCI device node */ + struct pci_dev *pdev; /* Associated PCI device */ + bool in_error; /* Error flag for edev */ + + /* VF specific properties */ + struct pci_dev *physfn; /* Associated SRIOV PF */ + int vf_index; /* Index of this VF */ +}; + +/* "fmt" must be a simple literal string */ +#define EEH_EDEV_PRINT(level, edev, fmt, ...) \ + pr_##level("PCI %04x:%02x:%02x.%x#%04x: EEH: " fmt, \ + (edev)->controller->global_number, PCI_BUSNO((edev)->bdfn), \ + PCI_SLOT((edev)->bdfn), PCI_FUNC((edev)->bdfn), \ + ((edev)->pe ? (edev)->pe_config_addr : 0xffff), ##__VA_ARGS__) +#define eeh_edev_dbg(edev, fmt, ...) EEH_EDEV_PRINT(debug, (edev), fmt, ##__VA_ARGS__) +#define eeh_edev_info(edev, fmt, ...) EEH_EDEV_PRINT(info, (edev), fmt, ##__VA_ARGS__) +#define eeh_edev_warn(edev, fmt, ...) EEH_EDEV_PRINT(warn, (edev), fmt, ##__VA_ARGS__) +#define eeh_edev_err(edev, fmt, ...) EEH_EDEV_PRINT(err, (edev), fmt, ##__VA_ARGS__) + +static inline struct pci_dn *eeh_dev_to_pdn(struct eeh_dev *edev) +{ + return edev ? edev->pdn : NULL; +} + +static inline struct pci_dev *eeh_dev_to_pci_dev(struct eeh_dev *edev) +{ + return edev ? edev->pdev : NULL; +} + +static inline struct eeh_pe *eeh_dev_to_pe(struct eeh_dev* edev) +{ + return edev ? edev->pe : NULL; +} + +/* Return values from eeh_ops::next_error */ +enum { + EEH_NEXT_ERR_NONE = 0, + EEH_NEXT_ERR_INF, + EEH_NEXT_ERR_FROZEN_PE, + EEH_NEXT_ERR_FENCED_PHB, + EEH_NEXT_ERR_DEAD_PHB, + EEH_NEXT_ERR_DEAD_IOC +}; + +/* + * The struct is used to trace the registered EEH operation + * callback functions. Actually, those operation callback + * functions are heavily platform dependent. That means the + * platform should register its own EEH operation callback + * functions before any EEH further operations. + */ +#define EEH_OPT_DISABLE 0 /* EEH disable */ +#define EEH_OPT_ENABLE 1 /* EEH enable */ +#define EEH_OPT_THAW_MMIO 2 /* MMIO enable */ +#define EEH_OPT_THAW_DMA 3 /* DMA enable */ +#define EEH_OPT_FREEZE_PE 4 /* Freeze PE */ +#define EEH_STATE_UNAVAILABLE (1 << 0) /* State unavailable */ +#define EEH_STATE_NOT_SUPPORT (1 << 1) /* EEH not supported */ +#define EEH_STATE_RESET_ACTIVE (1 << 2) /* Active reset */ +#define EEH_STATE_MMIO_ACTIVE (1 << 3) /* Active MMIO */ +#define EEH_STATE_DMA_ACTIVE (1 << 4) /* Active DMA */ +#define EEH_STATE_MMIO_ENABLED (1 << 5) /* MMIO enabled */ +#define EEH_STATE_DMA_ENABLED (1 << 6) /* DMA enabled */ +#define EEH_RESET_DEACTIVATE 0 /* Deactivate the PE reset */ +#define EEH_RESET_HOT 1 /* Hot reset */ +#define EEH_RESET_FUNDAMENTAL 3 /* Fundamental reset */ +#define EEH_LOG_TEMP 1 /* EEH temporary error log */ +#define EEH_LOG_PERM 2 /* EEH permanent error log */ + +struct eeh_ops { + char *name; + struct eeh_dev *(*probe)(struct pci_dev *pdev); + int (*set_option)(struct eeh_pe *pe, int option); + int (*get_state)(struct eeh_pe *pe, int *delay); + int (*reset)(struct eeh_pe *pe, int option); + int (*get_log)(struct eeh_pe *pe, int severity, char *drv_log, unsigned long len); + int (*configure_bridge)(struct eeh_pe *pe); + int (*err_inject)(struct eeh_pe *pe, int type, int func, + unsigned long addr, unsigned long mask); + int (*read_config)(struct eeh_dev *edev, int where, int size, u32 *val); + int (*write_config)(struct eeh_dev *edev, int where, int size, u32 val); + int (*next_error)(struct eeh_pe **pe); + int (*restore_config)(struct eeh_dev *edev); + int (*notify_resume)(struct eeh_dev *edev); +}; + +extern int eeh_subsystem_flags; +extern u32 eeh_max_freezes; +extern bool eeh_debugfs_no_recover; +extern struct eeh_ops *eeh_ops; +extern raw_spinlock_t confirm_error_lock; + +static inline void eeh_add_flag(int flag) +{ + eeh_subsystem_flags |= flag; +} + +static inline void eeh_clear_flag(int flag) +{ + eeh_subsystem_flags &= ~flag; +} + +static inline bool eeh_has_flag(int flag) +{ + return !!(eeh_subsystem_flags & flag); +} + +static inline bool eeh_enabled(void) +{ + return eeh_has_flag(EEH_ENABLED) && !eeh_has_flag(EEH_FORCE_DISABLED); +} + +static inline void eeh_serialize_lock(unsigned long *flags) +{ + raw_spin_lock_irqsave(&confirm_error_lock, *flags); +} + +static inline void eeh_serialize_unlock(unsigned long flags) +{ + raw_spin_unlock_irqrestore(&confirm_error_lock, flags); +} + +static inline bool eeh_state_active(int state) +{ + return (state & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) + == (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE); +} + +typedef void (*eeh_edev_traverse_func)(struct eeh_dev *edev, void *flag); +typedef void *(*eeh_pe_traverse_func)(struct eeh_pe *pe, void *flag); +void eeh_set_pe_aux_size(int size); +int eeh_phb_pe_create(struct pci_controller *phb); +int eeh_wait_state(struct eeh_pe *pe, int max_wait); +struct eeh_pe *eeh_phb_pe_get(struct pci_controller *phb); +struct eeh_pe *eeh_pe_next(struct eeh_pe *pe, struct eeh_pe *root); +struct eeh_pe *eeh_pe_get(struct pci_controller *phb, int pe_no); +int eeh_pe_tree_insert(struct eeh_dev *edev, struct eeh_pe *new_pe_parent); +int eeh_pe_tree_remove(struct eeh_dev *edev); +void eeh_pe_update_time_stamp(struct eeh_pe *pe); +void *eeh_pe_traverse(struct eeh_pe *root, + eeh_pe_traverse_func fn, void *flag); +void eeh_pe_dev_traverse(struct eeh_pe *root, + eeh_edev_traverse_func fn, void *flag); +void eeh_pe_restore_bars(struct eeh_pe *pe); +const char *eeh_pe_loc_get(struct eeh_pe *pe); +struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe); + +void eeh_show_enabled(void); +int __init eeh_init(struct eeh_ops *ops); +int eeh_check_failure(const volatile void __iomem *token); +int eeh_dev_check_failure(struct eeh_dev *edev); +void eeh_addr_cache_init(void); +void eeh_probe_device(struct pci_dev *pdev); +void eeh_remove_device(struct pci_dev *); +int eeh_unfreeze_pe(struct eeh_pe *pe); +int eeh_pe_reset_and_recover(struct eeh_pe *pe); +int eeh_dev_open(struct pci_dev *pdev); +void eeh_dev_release(struct pci_dev *pdev); +struct eeh_pe *eeh_iommu_group_to_pe(struct iommu_group *group); +int eeh_pe_set_option(struct eeh_pe *pe, int option); +int eeh_pe_get_state(struct eeh_pe *pe); +int eeh_pe_reset(struct eeh_pe *pe, int option, bool include_passed); +int eeh_pe_configure(struct eeh_pe *pe); +int eeh_pe_inject_err(struct eeh_pe *pe, int type, int func, + unsigned long addr, unsigned long mask); + +/** + * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure. + * + * If this macro yields TRUE, the caller relays to eeh_check_failure() + * which does further tests out of line. + */ +#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_enabled()) + +/* + * Reads from a device which has been isolated by EEH will return + * all 1s. This macro gives an all-1s value of the given size (in + * bytes: 1, 2, or 4) for comparing with the result of a read. + */ +#define EEH_IO_ERROR_VALUE(size) (~0U >> ((4 - (size)) * 8)) + +#else /* !CONFIG_EEH */ + +static inline bool eeh_enabled(void) +{ + return false; +} + +static inline void eeh_show_enabled(void) { } + +static inline void eeh_dev_phb_init_dynamic(struct pci_controller *phb) { } + +static inline int eeh_check_failure(const volatile void __iomem *token) +{ + return 0; +} + +#define eeh_dev_check_failure(x) (0) + +static inline void eeh_addr_cache_init(void) { } + +static inline void eeh_probe_device(struct pci_dev *dev) { } + +static inline void eeh_remove_device(struct pci_dev *dev) { } + +#define EEH_POSSIBLE_ERROR(val, type) (0) +#define EEH_IO_ERROR_VALUE(size) (-1UL) +static inline int eeh_phb_pe_create(struct pci_controller *phb) { return 0; } +#endif /* CONFIG_EEH */ + +#if defined(CONFIG_PPC_PSERIES) && defined(CONFIG_EEH) +void pseries_eeh_init_edev(struct pci_dn *pdn); +void pseries_eeh_init_edev_recursive(struct pci_dn *pdn); +#else +static inline void pseries_eeh_add_device_early(struct pci_dn *pdn) { } +static inline void pseries_eeh_add_device_tree_early(struct pci_dn *pdn) { } +#endif + +#ifdef CONFIG_PPC64 +/* + * MMIO read/write operations with EEH support. + */ +static inline u8 eeh_readb(const volatile void __iomem *addr) +{ + u8 val = in_8(addr); + if (EEH_POSSIBLE_ERROR(val, u8)) + eeh_check_failure(addr); + return val; +} + +static inline u16 eeh_readw(const volatile void __iomem *addr) +{ + u16 val = in_le16(addr); + if (EEH_POSSIBLE_ERROR(val, u16)) + eeh_check_failure(addr); + return val; +} + +static inline u32 eeh_readl(const volatile void __iomem *addr) +{ + u32 val = in_le32(addr); + if (EEH_POSSIBLE_ERROR(val, u32)) + eeh_check_failure(addr); + return val; +} + +static inline u64 eeh_readq(const volatile void __iomem *addr) +{ + u64 val = in_le64(addr); + if (EEH_POSSIBLE_ERROR(val, u64)) + eeh_check_failure(addr); + return val; +} + +static inline u16 eeh_readw_be(const volatile void __iomem *addr) +{ + u16 val = in_be16(addr); + if (EEH_POSSIBLE_ERROR(val, u16)) + eeh_check_failure(addr); + return val; +} + +static inline u32 eeh_readl_be(const volatile void __iomem *addr) +{ + u32 val = in_be32(addr); + if (EEH_POSSIBLE_ERROR(val, u32)) + eeh_check_failure(addr); + return val; +} + +static inline u64 eeh_readq_be(const volatile void __iomem *addr) +{ + u64 val = in_be64(addr); + if (EEH_POSSIBLE_ERROR(val, u64)) + eeh_check_failure(addr); + return val; +} + +static inline void eeh_memcpy_fromio(void *dest, const + volatile void __iomem *src, + unsigned long n) +{ + _memcpy_fromio(dest, src, n); + + /* Look for ffff's here at dest[n]. Assume that at least 4 bytes + * were copied. Check all four bytes. + */ + if (n >= 4 && EEH_POSSIBLE_ERROR(*((u32 *)(dest + n - 4)), u32)) + eeh_check_failure(src); +} + +/* in-string eeh macros */ +static inline void eeh_readsb(const volatile void __iomem *addr, void * buf, + int ns) +{ + _insb(addr, buf, ns); + if (EEH_POSSIBLE_ERROR((*(((u8*)buf)+ns-1)), u8)) + eeh_check_failure(addr); +} + +static inline void eeh_readsw(const volatile void __iomem *addr, void * buf, + int ns) +{ + _insw(addr, buf, ns); + if (EEH_POSSIBLE_ERROR((*(((u16*)buf)+ns-1)), u16)) + eeh_check_failure(addr); +} + +static inline void eeh_readsl(const volatile void __iomem *addr, void * buf, + int nl) +{ + _insl(addr, buf, nl); + if (EEH_POSSIBLE_ERROR((*(((u32*)buf)+nl-1)), u32)) + eeh_check_failure(addr); +} + + +void eeh_cache_debugfs_init(void); + +#endif /* CONFIG_PPC64 */ +#endif /* __KERNEL__ */ +#endif /* _POWERPC_EEH_H */ diff --git a/arch/powerpc/include/asm/eeh_event.h b/arch/powerpc/include/asm/eeh_event.h new file mode 100644 index 000000000..dadde7d52 --- /dev/null +++ b/arch/powerpc/include/asm/eeh_event.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * + * Copyright (c) 2005 Linas Vepstas <linas@linas.org> + */ + +#ifndef ASM_POWERPC_EEH_EVENT_H +#define ASM_POWERPC_EEH_EVENT_H +#ifdef __KERNEL__ + +/* + * structure holding pci controller data that describes a + * change in the isolation status of a PCI slot. A pointer + * to this struct is passed as the data pointer in a notify + * callback. + */ +struct eeh_event { + struct list_head list; /* to form event queue */ + struct eeh_pe *pe; /* EEH PE */ +}; + +int eeh_event_init(void); +int eeh_send_failure_event(struct eeh_pe *pe); +int __eeh_send_failure_event(struct eeh_pe *pe); +void eeh_remove_event(struct eeh_pe *pe, bool force); +void eeh_handle_normal_event(struct eeh_pe *pe); +void eeh_handle_special_event(void); + +#endif /* __KERNEL__ */ +#endif /* ASM_POWERPC_EEH_EVENT_H */ diff --git a/arch/powerpc/include/asm/ehv_pic.h b/arch/powerpc/include/asm/ehv_pic.h new file mode 100644 index 000000000..dc7d48e3e --- /dev/null +++ b/arch/powerpc/include/asm/ehv_pic.h @@ -0,0 +1,40 @@ +/* + * EHV_PIC private definitions and structure. + * + * Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifndef __EHV_PIC_H__ +#define __EHV_PIC_H__ + +#include <linux/irq.h> + +#define NR_EHV_PIC_INTS 1024 + +#define EHV_PIC_INFO(name) EHV_PIC_##name + +#define EHV_PIC_VECPRI_POLARITY_NEGATIVE 0 +#define EHV_PIC_VECPRI_POLARITY_POSITIVE 1 +#define EHV_PIC_VECPRI_SENSE_EDGE 0 +#define EHV_PIC_VECPRI_SENSE_LEVEL 0x2 +#define EHV_PIC_VECPRI_POLARITY_MASK 0x1 +#define EHV_PIC_VECPRI_SENSE_MASK 0x2 + +struct ehv_pic { + /* The remapper for this EHV_PIC */ + struct irq_domain *irqhost; + + /* The "linux" controller struct */ + struct irq_chip hc_irq; + + /* core int flag */ + int coreint_flag; +}; + +void ehv_pic_init(void); +unsigned int ehv_pic_get_irq(void); + +#endif /* __EHV_PIC_H__ */ diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h new file mode 100644 index 000000000..53ed2ca40 --- /dev/null +++ b/arch/powerpc/include/asm/elf.h @@ -0,0 +1,179 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * ELF register definitions.. + */ +#ifndef _ASM_POWERPC_ELF_H +#define _ASM_POWERPC_ELF_H + +#include <linux/sched.h> /* for task_struct */ +#include <asm/page.h> +#include <asm/string.h> +#include <uapi/asm/elf.h> + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == ELF_ARCH) +#define compat_elf_check_arch(x) ((x)->e_machine == EM_PPC) + +#define CORE_DUMP_USE_REGSET +#define ELF_EXEC_PAGESIZE PAGE_SIZE + +/* + * This is the base location for PIE (ET_DYN with INTERP) loads. On + * 64-bit, this is raised to 4GB to leave the entire 32-bit address + * space open for things that want to use the area for 32-bit pointers. + */ +#define ELF_ET_DYN_BASE (is_32bit_task() ? 0x000400000UL : \ + 0x100000000UL) + +#define ELF_CORE_EFLAGS (is_elf2_task() ? 2 : 0) + +/* + * Our registers are always unsigned longs, whether we're a 32 bit + * process or 64 bit, on either a 64 bit or 32 bit kernel. + * + * This macro relies on elf_regs[i] having the right type to truncate to, + * either u32 or u64. It defines the body of the elf_core_copy_regs + * function, either the native one with elf_gregset_t elf_regs or + * the 32-bit one with elf_gregset_t32 elf_regs. + */ +#define PPC_ELF_CORE_COPY_REGS(elf_regs, regs) \ + int i, nregs = min(sizeof(*regs) / sizeof(unsigned long), \ + (size_t)ELF_NGREG); \ + for (i = 0; i < nregs; i++) \ + elf_regs[i] = ((unsigned long *) regs)[i]; \ + memset(&elf_regs[i], 0, (ELF_NGREG - i) * sizeof(elf_regs[0])) + +/* Common routine for both 32-bit and 64-bit native processes */ +static inline void ppc_elf_core_copy_regs(elf_gregset_t elf_regs, + struct pt_regs *regs) +{ + PPC_ELF_CORE_COPY_REGS(elf_regs, regs); +} +#define ELF_CORE_COPY_REGS(gregs, regs) ppc_elf_core_copy_regs(gregs, regs); + +/* ELF_HWCAP yields a mask that user programs can use to figure out what + instruction set this cpu supports. This could be done in userspace, + but it's not easy, and we've already done it here. */ +# define ELF_HWCAP (cur_cpu_spec->cpu_user_features) +# define ELF_HWCAP2 (cur_cpu_spec->cpu_user_features2) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. */ + +#define ELF_PLATFORM (cur_cpu_spec->platform) + +/* While ELF_PLATFORM indicates the ISA supported by the platform, it + * may not accurately reflect the underlying behavior of the hardware + * (as in the case of running in Power5+ compatibility mode on a + * Power6 machine). ELF_BASE_PLATFORM allows ld.so to load libraries + * that are tuned for the real hardware. + */ +#define ELF_BASE_PLATFORM (powerpc_base_platform) + +#ifdef __powerpc64__ +# define ELF_PLAT_INIT(_r, load_addr) do { \ + _r->gpr[2] = load_addr; \ +} while (0) +#endif /* __powerpc64__ */ + +#ifdef __powerpc64__ +# define SET_PERSONALITY(ex) \ +do { \ + if (((ex).e_flags & 0x3) == 2) \ + set_thread_flag(TIF_ELF2ABI); \ + else \ + clear_thread_flag(TIF_ELF2ABI); \ + if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ + set_thread_flag(TIF_32BIT); \ + else \ + clear_thread_flag(TIF_32BIT); \ + if (personality(current->personality) != PER_LINUX32) \ + set_personality(PER_LINUX | \ + (current->personality & (~PER_MASK))); \ +} while (0) +/* + * An executable for which elf_read_implies_exec() returns TRUE will + * have the READ_IMPLIES_EXEC personality flag set automatically. This + * is only required to work around bugs in old 32bit toolchains. Since + * the 64bit ABI has never had these issues dont enable the workaround + * even if we have an executable stack. + */ +# define elf_read_implies_exec(ex, exec_stk) (is_32bit_task() ? \ + (exec_stk == EXSTACK_DEFAULT) : 0) +#else +# define elf_read_implies_exec(ex, exec_stk) (exec_stk == EXSTACK_DEFAULT) +#endif /* __powerpc64__ */ + +extern int dcache_bsize; +extern int icache_bsize; +extern int ucache_bsize; + +/* vDSO has arch_setup_additional_pages */ +#define ARCH_HAS_SETUP_ADDITIONAL_PAGES +struct linux_binprm; +extern int arch_setup_additional_pages(struct linux_binprm *bprm, + int uses_interp); +#define VDSO_AUX_ENT(a,b) NEW_AUX_ENT(a,b) + +/* 1GB for 64bit, 8MB for 32bit */ +#define STACK_RND_MASK (is_32bit_task() ? \ + (0x7ff >> (PAGE_SHIFT - 12)) : \ + (0x3ffff >> (PAGE_SHIFT - 12))) + +#ifdef CONFIG_SPU_BASE +/* Notes used in ET_CORE. Note name is "SPU/<fd>/<filename>". */ +#define NT_SPU 1 + +#define ARCH_HAVE_EXTRA_ELF_NOTES + +#endif /* CONFIG_SPU_BASE */ + +#ifdef CONFIG_PPC64 + +#define get_cache_geometry(level) \ + (ppc64_caches.level.assoc << 16 | ppc64_caches.level.line_size) + +#define ARCH_DLINFO_CACHE_GEOMETRY \ + NEW_AUX_ENT(AT_L1I_CACHESIZE, ppc64_caches.l1i.size); \ + NEW_AUX_ENT(AT_L1I_CACHEGEOMETRY, get_cache_geometry(l1i)); \ + NEW_AUX_ENT(AT_L1D_CACHESIZE, ppc64_caches.l1d.size); \ + NEW_AUX_ENT(AT_L1D_CACHEGEOMETRY, get_cache_geometry(l1d)); \ + NEW_AUX_ENT(AT_L2_CACHESIZE, ppc64_caches.l2.size); \ + NEW_AUX_ENT(AT_L2_CACHEGEOMETRY, get_cache_geometry(l2)); \ + NEW_AUX_ENT(AT_L3_CACHESIZE, ppc64_caches.l3.size); \ + NEW_AUX_ENT(AT_L3_CACHEGEOMETRY, get_cache_geometry(l3)) + +#else +#define ARCH_DLINFO_CACHE_GEOMETRY +#endif + +/* + * The requirements here are: + * - keep the final alignment of sp (sp & 0xf) + * - make sure the 32-bit value at the first 16 byte aligned position of + * AUXV is greater than 16 for glibc compatibility. + * AT_IGNOREPPC is used for that. + * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC, + * even if DLINFO_ARCH_ITEMS goes to zero or is undefined. + * update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes + */ +#define ARCH_DLINFO \ +do { \ + /* Handle glibc compatibility. */ \ + NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC); \ + NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC); \ + /* Cache size items */ \ + NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize); \ + NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize); \ + NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize); \ + VDSO_AUX_ENT(AT_SYSINFO_EHDR, current->mm->context.vdso_base); \ + ARCH_DLINFO_CACHE_GEOMETRY; \ +} while (0) + +/* Relocate the kernel image to @final_address */ +void relocate(unsigned long final_address); + +#endif /* _ASM_POWERPC_ELF_H */ diff --git a/arch/powerpc/include/asm/elfnote.h b/arch/powerpc/include/asm/elfnote.h new file mode 100644 index 000000000..a201b6e9a --- /dev/null +++ b/arch/powerpc/include/asm/elfnote.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * PowerPC ELF notes. + * + * Copyright 2019, IBM Corporation + */ + +#ifndef __ASM_POWERPC_ELFNOTE_H__ +#define __ASM_POWERPC_ELFNOTE_H__ + +/* + * These note types should live in a SHT_NOTE segment and have + * "PowerPC" in the name field. + */ + +/* + * The capabilities supported/required by this kernel (bitmap). + * + * This type uses a bitmap as "desc" field. Each bit is described + * in arch/powerpc/kernel/note.S + */ +#define PPC_ELFNOTE_CAPABILITIES 1 + +#endif /* __ASM_POWERPC_ELFNOTE_H__ */ diff --git a/arch/powerpc/include/asm/emergency-restart.h b/arch/powerpc/include/asm/emergency-restart.h new file mode 100644 index 000000000..3711bd9d5 --- /dev/null +++ b/arch/powerpc/include/asm/emergency-restart.h @@ -0,0 +1 @@ +#include <asm-generic/emergency-restart.h> diff --git a/arch/powerpc/include/asm/emulated_ops.h b/arch/powerpc/include/asm/emulated_ops.h new file mode 100644 index 000000000..800cb2100 --- /dev/null +++ b/arch/powerpc/include/asm/emulated_ops.h @@ -0,0 +1,84 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright 2007 Sony Corporation + */ + +#ifndef _ASM_POWERPC_EMULATED_OPS_H +#define _ASM_POWERPC_EMULATED_OPS_H + +#include <linux/atomic.h> +#include <linux/perf_event.h> + + +#ifdef CONFIG_PPC_EMULATED_STATS + +struct ppc_emulated_entry { + const char *name; + atomic_t val; +}; + +extern struct ppc_emulated { +#ifdef CONFIG_ALTIVEC + struct ppc_emulated_entry altivec; +#endif + struct ppc_emulated_entry dcba; + struct ppc_emulated_entry dcbz; + struct ppc_emulated_entry fp_pair; + struct ppc_emulated_entry isel; + struct ppc_emulated_entry mcrxr; + struct ppc_emulated_entry mfpvr; + struct ppc_emulated_entry multiple; + struct ppc_emulated_entry popcntb; + struct ppc_emulated_entry spe; + struct ppc_emulated_entry string; + struct ppc_emulated_entry sync; + struct ppc_emulated_entry unaligned; +#ifdef CONFIG_MATH_EMULATION + struct ppc_emulated_entry math; +#endif +#ifdef CONFIG_VSX + struct ppc_emulated_entry vsx; +#endif +#ifdef CONFIG_PPC64 + struct ppc_emulated_entry mfdscr; + struct ppc_emulated_entry mtdscr; + struct ppc_emulated_entry lq_stq; + struct ppc_emulated_entry lxvw4x; + struct ppc_emulated_entry lxvh8x; + struct ppc_emulated_entry lxvd2x; + struct ppc_emulated_entry lxvb16x; +#endif +} ppc_emulated; + +extern u32 ppc_warn_emulated; + +extern void ppc_warn_emulated_print(const char *type); + +#define __PPC_WARN_EMULATED(type) \ + do { \ + atomic_inc(&ppc_emulated.type.val); \ + if (ppc_warn_emulated) \ + ppc_warn_emulated_print(ppc_emulated.type.name); \ + } while (0) + +#else /* !CONFIG_PPC_EMULATED_STATS */ + +#define __PPC_WARN_EMULATED(type) do { } while (0) + +#endif /* !CONFIG_PPC_EMULATED_STATS */ + +#define PPC_WARN_EMULATED(type, regs) \ + do { \ + perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, \ + 1, regs, 0); \ + __PPC_WARN_EMULATED(type); \ + } while (0) + +#define PPC_WARN_ALIGNMENT(type, regs) \ + do { \ + perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS, \ + 1, regs, regs->dar); \ + __PPC_WARN_EMULATED(type); \ + } while (0) + +#endif /* _ASM_POWERPC_EMULATED_OPS_H */ diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h new file mode 100644 index 000000000..c99ba08a4 --- /dev/null +++ b/arch/powerpc/include/asm/epapr_hcalls.h @@ -0,0 +1,575 @@ +/* + * ePAPR hcall interface + * + * Copyright 2008-2011 Freescale Semiconductor, Inc. + * + * Author: Timur Tabi <timur@freescale.com> + * + * This file is provided under a dual BSD/GPL license. When using or + * redistributing this file, you may do so under either license. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* A "hypercall" is an "sc 1" instruction. This header file provides C + * wrapper functions for the ePAPR hypervisor interface. It is inteded + * for use by Linux device drivers and other operating systems. + * + * The hypercalls are implemented as inline assembly, rather than assembly + * language functions in a .S file, for optimization. It allows + * the caller to issue the hypercall instruction directly, improving both + * performance and memory footprint. + */ + +#ifndef _EPAPR_HCALLS_H +#define _EPAPR_HCALLS_H + +#include <uapi/asm/epapr_hcalls.h> + +#ifndef __ASSEMBLY__ +#include <linux/types.h> +#include <linux/errno.h> +#include <asm/byteorder.h> + +/* + * Hypercall register clobber list + * + * These macros are used to define the list of clobbered registers during a + * hypercall. Technically, registers r0 and r3-r12 are always clobbered, + * but the gcc inline assembly syntax does not allow us to specify registers + * on the clobber list that are also on the input/output list. Therefore, + * the lists of clobbered registers depends on the number of register + * parmeters ("+r" and "=r") passed to the hypercall. + * + * Each assembly block should use one of the HCALL_CLOBBERSx macros. As a + * general rule, 'x' is the number of parameters passed to the assembly + * block *except* for r11. + * + * If you're not sure, just use the smallest value of 'x' that does not + * generate a compilation error. Because these are static inline functions, + * the compiler will only check the clobber list for a function if you + * compile code that calls that function. + * + * r3 and r11 are not included in any clobbers list because they are always + * listed as output registers. + * + * XER, CTR, and LR are currently listed as clobbers because it's uncertain + * whether they will be clobbered. + * + * Note that r11 can be used as an output parameter. + * + * The "memory" clobber is only necessary for hcalls where the Hypervisor + * will read or write guest memory. However, we add it to all hcalls because + * the impact is minimal, and we want to ensure that it's present for the + * hcalls that need it. +*/ + +/* List of common clobbered registers. Do not use this macro. */ +#define EV_HCALL_CLOBBERS "r0", "r12", "xer", "ctr", "lr", "cc", "memory" + +#define EV_HCALL_CLOBBERS8 EV_HCALL_CLOBBERS +#define EV_HCALL_CLOBBERS7 EV_HCALL_CLOBBERS8, "r10" +#define EV_HCALL_CLOBBERS6 EV_HCALL_CLOBBERS7, "r9" +#define EV_HCALL_CLOBBERS5 EV_HCALL_CLOBBERS6, "r8" +#define EV_HCALL_CLOBBERS4 EV_HCALL_CLOBBERS5, "r7" +#define EV_HCALL_CLOBBERS3 EV_HCALL_CLOBBERS4, "r6" +#define EV_HCALL_CLOBBERS2 EV_HCALL_CLOBBERS3, "r5" +#define EV_HCALL_CLOBBERS1 EV_HCALL_CLOBBERS2, "r4" + +extern bool epapr_paravirt_enabled; +extern u32 epapr_hypercall_start[]; + +#ifdef CONFIG_EPAPR_PARAVIRT +int __init epapr_paravirt_early_init(void); +#else +static inline int epapr_paravirt_early_init(void) { return 0; } +#endif + +/* + * We use "uintptr_t" to define a register because it's guaranteed to be a + * 32-bit integer on a 32-bit platform, and a 64-bit integer on a 64-bit + * platform. + * + * All registers are either input/output or output only. Registers that are + * initialized before making the hypercall are input/output. All + * input/output registers are represented with "+r". Output-only registers + * are represented with "=r". Do not specify any unused registers. The + * clobber list will tell the compiler that the hypercall modifies those + * registers, which is good enough. + */ + +/** + * ev_int_set_config - configure the specified interrupt + * @interrupt: the interrupt number + * @config: configuration for this interrupt + * @priority: interrupt priority + * @destination: destination CPU number + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_int_set_config(unsigned int interrupt, + uint32_t config, unsigned int priority, uint32_t destination) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + + r11 = EV_HCALL_TOKEN(EV_INT_SET_CONFIG); + r3 = interrupt; + r4 = config; + r5 = priority; + r6 = destination; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "+r" (r4), "+r" (r5), "+r" (r6) + : : EV_HCALL_CLOBBERS4 + ); + + return r3; +} + +/** + * ev_int_get_config - return the config of the specified interrupt + * @interrupt: the interrupt number + * @config: returned configuration for this interrupt + * @priority: returned interrupt priority + * @destination: returned destination CPU number + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_int_get_config(unsigned int interrupt, + uint32_t *config, unsigned int *priority, uint32_t *destination) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + + r11 = EV_HCALL_TOKEN(EV_INT_GET_CONFIG); + r3 = interrupt; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "=r" (r4), "=r" (r5), "=r" (r6) + : : EV_HCALL_CLOBBERS4 + ); + + *config = r4; + *priority = r5; + *destination = r6; + + return r3; +} + +/** + * ev_int_set_mask - sets the mask for the specified interrupt source + * @interrupt: the interrupt number + * @mask: 0=enable interrupts, 1=disable interrupts + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_int_set_mask(unsigned int interrupt, + unsigned int mask) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = EV_HCALL_TOKEN(EV_INT_SET_MASK); + r3 = interrupt; + r4 = mask; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "+r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + return r3; +} + +/** + * ev_int_get_mask - returns the mask for the specified interrupt source + * @interrupt: the interrupt number + * @mask: returned mask for this interrupt (0=enabled, 1=disabled) + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_int_get_mask(unsigned int interrupt, + unsigned int *mask) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = EV_HCALL_TOKEN(EV_INT_GET_MASK); + r3 = interrupt; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "=r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + *mask = r4; + + return r3; +} + +/** + * ev_int_eoi - signal the end of interrupt processing + * @interrupt: the interrupt number + * + * This function signals the end of processing for the specified + * interrupt, which must be the interrupt currently in service. By + * definition, this is also the highest-priority interrupt. + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_int_eoi(unsigned int interrupt) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = EV_HCALL_TOKEN(EV_INT_EOI); + r3 = interrupt; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +/** + * ev_byte_channel_send - send characters to a byte stream + * @handle: byte stream handle + * @count: (input) num of chars to send, (output) num chars sent + * @buffer: pointer to a 16-byte buffer + * + * @buffer must be at least 16 bytes long, because all 16 bytes will be + * read from memory into registers, even if count < 16. + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_byte_channel_send(unsigned int handle, + unsigned int *count, const char buffer[EV_BYTE_CHANNEL_MAX_BYTES]) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + register uintptr_t r7 __asm__("r7"); + register uintptr_t r8 __asm__("r8"); + const uint32_t *p = (const uint32_t *) buffer; + + r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_SEND); + r3 = handle; + r4 = *count; + r5 = be32_to_cpu(p[0]); + r6 = be32_to_cpu(p[1]); + r7 = be32_to_cpu(p[2]); + r8 = be32_to_cpu(p[3]); + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), + "+r" (r4), "+r" (r5), "+r" (r6), "+r" (r7), "+r" (r8) + : : EV_HCALL_CLOBBERS6 + ); + + *count = r4; + + return r3; +} + +/** + * ev_byte_channel_receive - fetch characters from a byte channel + * @handle: byte channel handle + * @count: (input) max num of chars to receive, (output) num chars received + * @buffer: pointer to a 16-byte buffer + * + * The size of @buffer must be at least 16 bytes, even if you request fewer + * than 16 characters, because we always write 16 bytes to @buffer. This is + * for performance reasons. + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_byte_channel_receive(unsigned int handle, + unsigned int *count, char buffer[EV_BYTE_CHANNEL_MAX_BYTES]) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + register uintptr_t r7 __asm__("r7"); + register uintptr_t r8 __asm__("r8"); + uint32_t *p = (uint32_t *) buffer; + + r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_RECEIVE); + r3 = handle; + r4 = *count; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "+r" (r4), + "=r" (r5), "=r" (r6), "=r" (r7), "=r" (r8) + : : EV_HCALL_CLOBBERS6 + ); + + *count = r4; + p[0] = cpu_to_be32(r5); + p[1] = cpu_to_be32(r6); + p[2] = cpu_to_be32(r7); + p[3] = cpu_to_be32(r8); + + return r3; +} + +/** + * ev_byte_channel_poll - returns the status of the byte channel buffers + * @handle: byte channel handle + * @rx_count: returned count of bytes in receive queue + * @tx_count: returned count of free space in transmit queue + * + * This function reports the amount of data in the receive queue (i.e. the + * number of bytes you can read), and the amount of free space in the transmit + * queue (i.e. the number of bytes you can write). + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_byte_channel_poll(unsigned int handle, + unsigned int *rx_count, unsigned int *tx_count) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + + r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_POLL); + r3 = handle; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "=r" (r4), "=r" (r5) + : : EV_HCALL_CLOBBERS3 + ); + + *rx_count = r4; + *tx_count = r5; + + return r3; +} + +/** + * ev_int_iack - acknowledge an interrupt + * @handle: handle to the target interrupt controller + * @vector: returned interrupt vector + * + * If handle is zero, the function returns the next interrupt source + * number to be handled irrespective of the hierarchy or cascading + * of interrupt controllers. If non-zero, specifies a handle to the + * interrupt controller that is the target of the acknowledge. + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_int_iack(unsigned int handle, + unsigned int *vector) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = EV_HCALL_TOKEN(EV_INT_IACK); + r3 = handle; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "=r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + *vector = r4; + + return r3; +} + +/** + * ev_doorbell_send - send a doorbell to another partition + * @handle: doorbell send handle + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_doorbell_send(unsigned int handle) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = EV_HCALL_TOKEN(EV_DOORBELL_SEND); + r3 = handle; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +/** + * ev_idle -- wait for next interrupt on this core + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_idle(void) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = EV_HCALL_TOKEN(EV_IDLE); + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "=r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +#ifdef CONFIG_EPAPR_PARAVIRT +static inline unsigned long epapr_hypercall(unsigned long *in, + unsigned long *out, + unsigned long nr) +{ + register unsigned long r0 asm("r0"); + register unsigned long r3 asm("r3") = in[0]; + register unsigned long r4 asm("r4") = in[1]; + register unsigned long r5 asm("r5") = in[2]; + register unsigned long r6 asm("r6") = in[3]; + register unsigned long r7 asm("r7") = in[4]; + register unsigned long r8 asm("r8") = in[5]; + register unsigned long r9 asm("r9") = in[6]; + register unsigned long r10 asm("r10") = in[7]; + register unsigned long r11 asm("r11") = nr; + register unsigned long r12 asm("r12"); + + asm volatile("bl epapr_hypercall_start" + : "=r"(r0), "=r"(r3), "=r"(r4), "=r"(r5), "=r"(r6), + "=r"(r7), "=r"(r8), "=r"(r9), "=r"(r10), "=r"(r11), + "=r"(r12) + : "r"(r3), "r"(r4), "r"(r5), "r"(r6), "r"(r7), "r"(r8), + "r"(r9), "r"(r10), "r"(r11) + : "memory", "cc", "xer", "ctr", "lr"); + + out[0] = r4; + out[1] = r5; + out[2] = r6; + out[3] = r7; + out[4] = r8; + out[5] = r9; + out[6] = r10; + out[7] = r11; + + return r3; +} +#else +static unsigned long epapr_hypercall(unsigned long *in, + unsigned long *out, + unsigned long nr) +{ + return EV_UNIMPLEMENTED; +} +#endif + +static inline long epapr_hypercall0_1(unsigned int nr, unsigned long *r2) +{ + unsigned long in[8] = {0}; + unsigned long out[8]; + unsigned long r; + + r = epapr_hypercall(in, out, nr); + *r2 = out[0]; + + return r; +} + +static inline long epapr_hypercall0(unsigned int nr) +{ + unsigned long in[8] = {0}; + unsigned long out[8]; + + return epapr_hypercall(in, out, nr); +} + +static inline long epapr_hypercall1(unsigned int nr, unsigned long p1) +{ + unsigned long in[8] = {0}; + unsigned long out[8]; + + in[0] = p1; + return epapr_hypercall(in, out, nr); +} + +static inline long epapr_hypercall2(unsigned int nr, unsigned long p1, + unsigned long p2) +{ + unsigned long in[8] = {0}; + unsigned long out[8]; + + in[0] = p1; + in[1] = p2; + return epapr_hypercall(in, out, nr); +} + +static inline long epapr_hypercall3(unsigned int nr, unsigned long p1, + unsigned long p2, unsigned long p3) +{ + unsigned long in[8] = {0}; + unsigned long out[8]; + + in[0] = p1; + in[1] = p2; + in[2] = p3; + return epapr_hypercall(in, out, nr); +} + +static inline long epapr_hypercall4(unsigned int nr, unsigned long p1, + unsigned long p2, unsigned long p3, + unsigned long p4) +{ + unsigned long in[8] = {0}; + unsigned long out[8]; + + in[0] = p1; + in[1] = p2; + in[2] = p3; + in[3] = p4; + return epapr_hypercall(in, out, nr); +} +#endif /* !__ASSEMBLY__ */ +#endif /* _EPAPR_HCALLS_H */ diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h new file mode 100644 index 000000000..40cdcb2fb --- /dev/null +++ b/arch/powerpc/include/asm/exception-64e.h @@ -0,0 +1,168 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Definitions for use by exception code on Book3-E + * + * Copyright (C) 2008 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp. + */ +#ifndef _ASM_POWERPC_EXCEPTION_64E_H +#define _ASM_POWERPC_EXCEPTION_64E_H + +/* + * SPRGs usage an other considerations... + * + * Since TLB miss and other standard exceptions can be interrupted by + * critical exceptions which can themselves be interrupted by machine + * checks, and since the two later can themselves cause a TLB miss when + * hitting the linear mapping for the kernel stacks, we need to be a bit + * creative on how we use SPRGs. + * + * The base idea is that we have one SRPG reserved for critical and one + * for machine check interrupts. Those are used to save a GPR that can + * then be used to get the PACA, and store as much context as we need + * to save in there. That includes saving the SPRGs used by the TLB miss + * handler for linear mapping misses and the associated SRR0/1 due to + * the above re-entrancy issue. + * + * So here's the current usage pattern. It's done regardless of which + * SPRGs are user-readable though, thus we might have to change some of + * this later. In order to do that more easily, we use special constants + * for naming them + * + * WARNING: Some of these SPRGs are user readable. We need to do something + * about it as some point by making sure they can't be used to leak kernel + * critical data + */ + +#define PACA_EXGDBELL PACA_EXGEN + +/* We are out of SPRGs so we save some things in the PACA. The normal + * exception frame is smaller than the CRIT or MC one though + */ +#define EX_R1 (0 * 8) +#define EX_CR (1 * 8) +#define EX_R10 (2 * 8) +#define EX_R11 (3 * 8) +#define EX_R14 (4 * 8) +#define EX_R15 (5 * 8) + +/* + * The TLB miss exception uses different slots. + * + * The bolted variant uses only the first six fields, + * which in combination with pgd and kernel_pgd fits in + * one 64-byte cache line. + */ + +#define EX_TLB_R10 ( 0 * 8) +#define EX_TLB_R11 ( 1 * 8) +#define EX_TLB_R14 ( 2 * 8) +#define EX_TLB_R15 ( 3 * 8) +#define EX_TLB_R16 ( 4 * 8) +#define EX_TLB_CR ( 5 * 8) +#define EX_TLB_R12 ( 6 * 8) +#define EX_TLB_R13 ( 7 * 8) +#define EX_TLB_DEAR ( 8 * 8) /* Level 0 and 2 only */ +#define EX_TLB_ESR ( 9 * 8) /* Level 0 and 2 only */ +#define EX_TLB_SRR0 (10 * 8) +#define EX_TLB_SRR1 (11 * 8) +#define EX_TLB_R7 (12 * 8) +#define EX_TLB_SIZE (13 * 8) + +#define START_EXCEPTION(label) \ + .globl exc_##label##_book3e; \ +exc_##label##_book3e: + +/* TLB miss exception prolog + * + * This prolog handles re-entrancy (up to 3 levels supported in the PACA + * though we currently don't test for overflow). It provides you with a + * re-entrancy safe working space of r10...r16 and CR with r12 being used + * as the exception area pointer in the PACA for that level of re-entrancy + * and r13 containing the PACA pointer. + * + * SRR0 and SRR1 are saved, but DEAR and ESR are not, since they don't apply + * as-is for instruction exceptions. It's up to the actual exception code + * to save them as well if required. + */ +#define TLB_MISS_PROLOG \ + mtspr SPRN_SPRG_TLB_SCRATCH,r12; \ + mfspr r12,SPRN_SPRG_TLB_EXFRAME; \ + std r10,EX_TLB_R10(r12); \ + mfcr r10; \ + std r11,EX_TLB_R11(r12); \ + mfspr r11,SPRN_SPRG_TLB_SCRATCH; \ + std r13,EX_TLB_R13(r12); \ + mfspr r13,SPRN_SPRG_PACA; \ + std r14,EX_TLB_R14(r12); \ + addi r14,r12,EX_TLB_SIZE; \ + std r15,EX_TLB_R15(r12); \ + mfspr r15,SPRN_SRR1; \ + std r16,EX_TLB_R16(r12); \ + mfspr r16,SPRN_SRR0; \ + std r10,EX_TLB_CR(r12); \ + std r11,EX_TLB_R12(r12); \ + mtspr SPRN_SPRG_TLB_EXFRAME,r14; \ + std r15,EX_TLB_SRR1(r12); \ + std r16,EX_TLB_SRR0(r12); + +/* And these are the matching epilogs that restores things + * + * There are 3 epilogs: + * + * - SUCCESS : Unwinds one level + * - ERROR : restore from level 0 and reset + * - ERROR_SPECIAL : restore from current level and reset + * + * Normal errors use ERROR, that is, they restore the initial fault context + * and trigger a fault. However, there is a special case for linear mapping + * errors. Those should basically never happen, but if they do happen, we + * want the error to point out the context that did that linear mapping + * fault, not the initial level 0 (basically, we got a bogus PGF or something + * like that). For userland errors on the linear mapping, there is no + * difference since those are always level 0 anyway + */ + +#define TLB_MISS_RESTORE(freg) \ + ld r14,EX_TLB_CR(r12); \ + ld r10,EX_TLB_R10(r12); \ + ld r15,EX_TLB_SRR0(r12); \ + ld r16,EX_TLB_SRR1(r12); \ + mtspr SPRN_SPRG_TLB_EXFRAME,freg; \ + ld r11,EX_TLB_R11(r12); \ + mtcr r14; \ + ld r13,EX_TLB_R13(r12); \ + ld r14,EX_TLB_R14(r12); \ + mtspr SPRN_SRR0,r15; \ + ld r15,EX_TLB_R15(r12); \ + mtspr SPRN_SRR1,r16; \ + ld r16,EX_TLB_R16(r12); \ + ld r12,EX_TLB_R12(r12); \ + +#define TLB_MISS_EPILOG_SUCCESS \ + TLB_MISS_RESTORE(r12) + +#define TLB_MISS_EPILOG_ERROR \ + addi r12,r13,PACA_EXTLB; \ + TLB_MISS_RESTORE(r12) + +#define TLB_MISS_EPILOG_ERROR_SPECIAL \ + addi r11,r13,PACA_EXTLB; \ + TLB_MISS_RESTORE(r11) + +#define SET_IVOR(vector_number, vector_offset) \ + LOAD_REG_ADDR(r3,interrupt_base_book3e);\ + ori r3,r3,vector_offset@l; \ + mtspr SPRN_IVOR##vector_number,r3; +/* + * powerpc relies on return from interrupt/syscall being context synchronising + * (which rfi is) to support ARCH_HAS_MEMBARRIER_SYNC_CORE without additional + * synchronisation instructions. + */ +#define RFI_TO_KERNEL \ + rfi + +#define RFI_TO_USER \ + rfi + +#endif /* _ASM_POWERPC_EXCEPTION_64E_H */ + diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h new file mode 100644 index 000000000..c1a8aac01 --- /dev/null +++ b/arch/powerpc/include/asm/exception-64s.h @@ -0,0 +1,165 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_EXCEPTION_H +#define _ASM_POWERPC_EXCEPTION_H +/* + * Extracted from head_64.S + * + * PowerPC version + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP + * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> + * Adapted for Power Macintosh by Paul Mackerras. + * Low-level exception handlers and MMU support + * rewritten by Paul Mackerras. + * Copyright (C) 1996 Paul Mackerras. + * + * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and + * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com + * + * This file contains the low-level support and setup for the + * PowerPC-64 platform, including trap and interrupt dispatch. + */ +/* + * The following macros define the code that appears as + * the prologue to each of the exception handlers. They + * are split into two parts to allow a single kernel binary + * to be used for pSeries and iSeries. + * + * We make as much of the exception code common between native + * exception handlers (including pSeries LPAR) and iSeries LPAR + * implementations as possible. + */ +#include <asm/feature-fixups.h> + +/* PACA save area size in u64 units (exgen, exmc, etc) */ +#define EX_SIZE 10 + +/* + * maximum recursive depth of MCE exceptions + */ +#define MAX_MCE_DEPTH 4 + +#ifdef __ASSEMBLY__ + +#define STF_ENTRY_BARRIER_SLOT \ + STF_ENTRY_BARRIER_FIXUP_SECTION; \ + nop; \ + nop; \ + nop + +#define STF_EXIT_BARRIER_SLOT \ + STF_EXIT_BARRIER_FIXUP_SECTION; \ + nop; \ + nop; \ + nop; \ + nop; \ + nop; \ + nop + +#define ENTRY_FLUSH_SLOT \ + ENTRY_FLUSH_FIXUP_SECTION; \ + nop; \ + nop; \ + nop; + +#define SCV_ENTRY_FLUSH_SLOT \ + SCV_ENTRY_FLUSH_FIXUP_SECTION; \ + nop; \ + nop; \ + nop; + +/* + * r10 must be free to use, r13 must be paca + */ +#define INTERRUPT_TO_KERNEL \ + STF_ENTRY_BARRIER_SLOT; \ + ENTRY_FLUSH_SLOT + +/* + * r10, ctr must be free to use, r13 must be paca + */ +#define SCV_INTERRUPT_TO_KERNEL \ + STF_ENTRY_BARRIER_SLOT; \ + SCV_ENTRY_FLUSH_SLOT + +/* + * Macros for annotating the expected destination of (h)rfid + * + * The nop instructions allow us to insert one or more instructions to flush the + * L1-D cache when returning to userspace or a guest. + * + * powerpc relies on return from interrupt/syscall being context synchronising + * (which hrfid, rfid, and rfscv are) to support ARCH_HAS_MEMBARRIER_SYNC_CORE + * without additional synchronisation instructions. + * + * soft-masked interrupt replay does not include a context-synchronising rfid, + * but those always return to kernel, the sync is only required when returning + * to user. + */ +#define RFI_FLUSH_SLOT \ + RFI_FLUSH_FIXUP_SECTION; \ + nop; \ + nop; \ + nop + +#define RFI_TO_KERNEL \ + rfid + +#define RFI_TO_USER \ + STF_EXIT_BARRIER_SLOT; \ + RFI_FLUSH_SLOT; \ + rfid; \ + b rfi_flush_fallback + +#define RFI_TO_USER_OR_KERNEL \ + STF_EXIT_BARRIER_SLOT; \ + RFI_FLUSH_SLOT; \ + rfid; \ + b rfi_flush_fallback + +#define RFI_TO_GUEST \ + STF_EXIT_BARRIER_SLOT; \ + RFI_FLUSH_SLOT; \ + rfid; \ + b rfi_flush_fallback + +#define HRFI_TO_KERNEL \ + hrfid + +#define HRFI_TO_USER \ + STF_EXIT_BARRIER_SLOT; \ + RFI_FLUSH_SLOT; \ + hrfid; \ + b hrfi_flush_fallback + +#define HRFI_TO_USER_OR_KERNEL \ + STF_EXIT_BARRIER_SLOT; \ + RFI_FLUSH_SLOT; \ + hrfid; \ + b hrfi_flush_fallback + +#define HRFI_TO_GUEST \ + STF_EXIT_BARRIER_SLOT; \ + RFI_FLUSH_SLOT; \ + hrfid; \ + b hrfi_flush_fallback + +#define HRFI_TO_UNKNOWN \ + STF_EXIT_BARRIER_SLOT; \ + RFI_FLUSH_SLOT; \ + hrfid; \ + b hrfi_flush_fallback + +#define RFSCV_TO_USER \ + STF_EXIT_BARRIER_SLOT; \ + RFI_FLUSH_SLOT; \ + RFSCV; \ + b rfscv_flush_fallback + +#else /* __ASSEMBLY__ */ +/* Prototype for function defined in exceptions-64s.S */ +void do_uaccess_flush(void); +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_EXCEPTION_H */ diff --git a/arch/powerpc/include/asm/exec.h b/arch/powerpc/include/asm/exec.h new file mode 100644 index 000000000..92cac4851 --- /dev/null +++ b/arch/powerpc/include/asm/exec.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> + */ +#ifndef _ASM_POWERPC_EXEC_H +#define _ASM_POWERPC_EXEC_H + +extern unsigned long arch_align_stack(unsigned long sp); + +#endif /* _ASM_POWERPC_EXEC_H */ diff --git a/arch/powerpc/include/asm/extable.h b/arch/powerpc/include/asm/extable.h new file mode 100644 index 000000000..eb91b2d29 --- /dev/null +++ b/arch/powerpc/include/asm/extable.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ARCH_POWERPC_EXTABLE_H +#define _ARCH_POWERPC_EXTABLE_H + +/* + * The exception table consists of pairs of relative addresses: the first is + * the address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out what + * to do. + * + * All the routines below use bits of fixup code that are out of line with the + * main instruction path. This means when everything is well, we don't even + * have to jump over them. Further, they do not intrude on our cache or tlb + * entries. + */ + +#define ARCH_HAS_RELATIVE_EXTABLE + +struct exception_table_entry { + int insn; + int fixup; +}; + +static inline unsigned long extable_fixup(const struct exception_table_entry *x) +{ + return (unsigned long)&x->fixup + x->fixup; +} + +#endif diff --git a/arch/powerpc/include/asm/fadump-internal.h b/arch/powerpc/include/asm/fadump-internal.h new file mode 100644 index 000000000..8d61c8f3f --- /dev/null +++ b/arch/powerpc/include/asm/fadump-internal.h @@ -0,0 +1,171 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Firmware-Assisted Dump internal code. + * + * Copyright 2011, Mahesh Salgaonkar, IBM Corporation. + * Copyright 2019, Hari Bathini, IBM Corporation. + */ + +#ifndef _ASM_POWERPC_FADUMP_INTERNAL_H +#define _ASM_POWERPC_FADUMP_INTERNAL_H + +/* Maximum number of memory regions kernel supports */ +#define FADUMP_MAX_MEM_REGS 128 + +#ifndef CONFIG_PRESERVE_FA_DUMP + +/* The upper limit percentage for user specified boot memory size (25%) */ +#define MAX_BOOT_MEM_RATIO 4 + +#define memblock_num_regions(memblock_type) (memblock.memblock_type.cnt) + +/* Alignment per CMA requirement. */ +#define FADUMP_CMA_ALIGNMENT (PAGE_SIZE << \ + max_t(unsigned long, MAX_ORDER - 1, \ + pageblock_order)) + +/* FAD commands */ +#define FADUMP_REGISTER 1 +#define FADUMP_UNREGISTER 2 +#define FADUMP_INVALIDATE 3 + +/* + * Copy the ascii values for first 8 characters from a string into u64 + * variable at their respective indexes. + * e.g. + * The string "FADMPINF" will be converted into 0x4641444d50494e46 + */ +static inline u64 fadump_str_to_u64(const char *str) +{ + u64 val = 0; + int i; + + for (i = 0; i < sizeof(val); i++) + val = (*str) ? (val << 8) | *str++ : val << 8; + return val; +} + +#define FADUMP_CPU_UNKNOWN (~((u32)0)) + +#define FADUMP_CRASH_INFO_MAGIC fadump_str_to_u64("FADMPINF") + +/* fadump crash info structure */ +struct fadump_crash_info_header { + u64 magic_number; + u64 elfcorehdr_addr; + u32 crashing_cpu; + struct pt_regs regs; + struct cpumask online_mask; +}; + +struct fadump_memory_range { + u64 base; + u64 size; +}; + +/* fadump memory ranges info */ +#define RNG_NAME_SZ 16 +struct fadump_mrange_info { + char name[RNG_NAME_SZ]; + struct fadump_memory_range *mem_ranges; + u32 mem_ranges_sz; + u32 mem_range_cnt; + u32 max_mem_ranges; + bool is_static; +}; + +/* Platform specific callback functions */ +struct fadump_ops; + +/* Firmware-assisted dump configuration details. */ +struct fw_dump { + unsigned long reserve_dump_area_start; + unsigned long reserve_dump_area_size; + /* cmd line option during boot */ + unsigned long reserve_bootvar; + + unsigned long cpu_state_data_size; + u64 cpu_state_dest_vaddr; + u32 cpu_state_data_version; + u32 cpu_state_entry_size; + + unsigned long hpte_region_size; + + unsigned long boot_memory_size; + u64 boot_mem_dest_addr; + u64 boot_mem_addr[FADUMP_MAX_MEM_REGS]; + u64 boot_mem_sz[FADUMP_MAX_MEM_REGS]; + u64 boot_mem_top; + u64 boot_mem_regs_cnt; + + unsigned long fadumphdr_addr; + unsigned long cpu_notes_buf_vaddr; + unsigned long cpu_notes_buf_size; + + /* + * Maximum size supported by firmware to copy from source to + * destination address per entry. + */ + u64 max_copy_size; + u64 kernel_metadata; + + int ibm_configure_kernel_dump; + + unsigned long fadump_enabled:1; + unsigned long fadump_supported:1; + unsigned long dump_active:1; + unsigned long dump_registered:1; + unsigned long nocma:1; + + struct fadump_ops *ops; +}; + +struct fadump_ops { + u64 (*fadump_init_mem_struct)(struct fw_dump *fadump_conf); + u64 (*fadump_get_metadata_size)(void); + int (*fadump_setup_metadata)(struct fw_dump *fadump_conf); + u64 (*fadump_get_bootmem_min)(void); + int (*fadump_register)(struct fw_dump *fadump_conf); + int (*fadump_unregister)(struct fw_dump *fadump_conf); + int (*fadump_invalidate)(struct fw_dump *fadump_conf); + void (*fadump_cleanup)(struct fw_dump *fadump_conf); + int (*fadump_process)(struct fw_dump *fadump_conf); + void (*fadump_region_show)(struct fw_dump *fadump_conf, + struct seq_file *m); + void (*fadump_trigger)(struct fadump_crash_info_header *fdh, + const char *msg); +}; + +/* Helper functions */ +s32 fadump_setup_cpu_notes_buf(u32 num_cpus); +void fadump_free_cpu_notes_buf(void); +u32 *fadump_regs_to_elf_notes(u32 *buf, struct pt_regs *regs); +void fadump_update_elfcore_header(char *bufp); +bool is_fadump_boot_mem_contiguous(void); +bool is_fadump_reserved_mem_contiguous(void); + +#else /* !CONFIG_PRESERVE_FA_DUMP */ + +/* Firmware-assisted dump configuration details. */ +struct fw_dump { + u64 boot_mem_top; + u64 dump_active; +}; + +#endif /* CONFIG_PRESERVE_FA_DUMP */ + +#ifdef CONFIG_PPC_PSERIES +extern void rtas_fadump_dt_scan(struct fw_dump *fadump_conf, u64 node); +#else +static inline void +rtas_fadump_dt_scan(struct fw_dump *fadump_conf, u64 node) { } +#endif + +#ifdef CONFIG_PPC_POWERNV +extern void opal_fadump_dt_scan(struct fw_dump *fadump_conf, u64 node); +#else +static inline void +opal_fadump_dt_scan(struct fw_dump *fadump_conf, u64 node) { } +#endif + +#endif /* _ASM_POWERPC_FADUMP_INTERNAL_H */ diff --git a/arch/powerpc/include/asm/fadump.h b/arch/powerpc/include/asm/fadump.h new file mode 100644 index 000000000..526a6a647 --- /dev/null +++ b/arch/powerpc/include/asm/fadump.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Firmware Assisted dump header file. + * + * Copyright 2011 IBM Corporation + * Author: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> + */ + +#ifndef _ASM_POWERPC_FADUMP_H +#define _ASM_POWERPC_FADUMP_H + +#ifdef CONFIG_FA_DUMP + +extern int crashing_cpu; + +extern int is_fadump_memory_area(u64 addr, ulong size); +extern int setup_fadump(void); +extern int is_fadump_active(void); +extern int should_fadump_crash(void); +extern void crash_fadump(struct pt_regs *, const char *); +extern void fadump_cleanup(void); + +#else /* CONFIG_FA_DUMP */ +static inline int is_fadump_active(void) { return 0; } +static inline int should_fadump_crash(void) { return 0; } +static inline void crash_fadump(struct pt_regs *regs, const char *str) { } +static inline void fadump_cleanup(void) { } +#endif /* !CONFIG_FA_DUMP */ + +#if defined(CONFIG_FA_DUMP) || defined(CONFIG_PRESERVE_FA_DUMP) +extern int early_init_dt_scan_fw_dump(unsigned long node, const char *uname, + int depth, void *data); +extern int fadump_reserve_mem(void); +#endif +#endif /* _ASM_POWERPC_FADUMP_H */ diff --git a/arch/powerpc/include/asm/fb.h b/arch/powerpc/include/asm/fb.h new file mode 100644 index 000000000..6541ab77c --- /dev/null +++ b/arch/powerpc/include/asm/fb.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ + +#include <linux/fb.h> +#include <linux/fs.h> +#include <asm/page.h> + +static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, + unsigned long off) +{ + vma->vm_page_prot = phys_mem_access_prot(file, off >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, + vma->vm_page_prot); +} + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h new file mode 100644 index 000000000..8d100059e --- /dev/null +++ b/arch/powerpc/include/asm/feature-fixups.h @@ -0,0 +1,279 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef __ASM_POWERPC_FEATURE_FIXUPS_H +#define __ASM_POWERPC_FEATURE_FIXUPS_H + +#include <asm/asm-const.h> + +/* + */ + +/* + * Feature section common macros + * + * Note that the entries now contain offsets between the table entry + * and the code rather than absolute code pointers in order to be + * useable with the vdso shared library. There is also an assumption + * that values will be negative, that is, the fixup table has to be + * located after the code it fixes up. + */ +#if defined(CONFIG_PPC64) && !defined(__powerpc64__) +/* 64 bits kernel, 32 bits code (ie. vdso32) */ +#define FTR_ENTRY_LONG .8byte +#define FTR_ENTRY_OFFSET .long 0xffffffff; .long +#elif defined(CONFIG_PPC64) +#define FTR_ENTRY_LONG .8byte +#define FTR_ENTRY_OFFSET .8byte +#else +#define FTR_ENTRY_LONG .long +#define FTR_ENTRY_OFFSET .long +#endif + +#define START_FTR_SECTION(label) label##1: + +#define FTR_SECTION_ELSE_NESTED(label) \ +label##2: \ + .pushsection __ftr_alt_##label,"a"; \ + .align 2; \ +label##3: + +#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \ +label##4: \ + .popsection; \ + .pushsection sect,"a"; \ + .align 3; \ +label##5: \ + FTR_ENTRY_LONG msk; \ + FTR_ENTRY_LONG val; \ + FTR_ENTRY_OFFSET label##1b-label##5b; \ + FTR_ENTRY_OFFSET label##2b-label##5b; \ + FTR_ENTRY_OFFSET label##3b-label##5b; \ + FTR_ENTRY_OFFSET label##4b-label##5b; \ + .ifgt (label##4b- label##3b)-(label##2b- label##1b); \ + .error "Feature section else case larger than body"; \ + .endif; \ + .popsection; + + +/* CPU feature dependent sections */ +#define BEGIN_FTR_SECTION_NESTED(label) START_FTR_SECTION(label) +#define BEGIN_FTR_SECTION START_FTR_SECTION(97) + +#define END_FTR_SECTION_NESTED(msk, val, label) \ + FTR_SECTION_ELSE_NESTED(label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup) + +#define END_FTR_SECTION(msk, val) \ + END_FTR_SECTION_NESTED(msk, val, 97) + +#define END_FTR_SECTION_NESTED_IFSET(msk, label) \ + END_FTR_SECTION_NESTED((msk), (msk), label) + +#define END_FTR_SECTION_IFSET(msk) END_FTR_SECTION((msk), (msk)) +#define END_FTR_SECTION_IFCLR(msk) END_FTR_SECTION((msk), 0) + +/* CPU feature sections with alternatives, use BEGIN_FTR_SECTION to start */ +#define FTR_SECTION_ELSE FTR_SECTION_ELSE_NESTED(97) +#define ALT_FTR_SECTION_END_NESTED(msk, val, label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup) +#define ALT_FTR_SECTION_END_NESTED_IFSET(msk, label) \ + ALT_FTR_SECTION_END_NESTED(msk, msk, label) +#define ALT_FTR_SECTION_END_NESTED_IFCLR(msk, label) \ + ALT_FTR_SECTION_END_NESTED(msk, 0, label) +#define ALT_FTR_SECTION_END(msk, val) \ + ALT_FTR_SECTION_END_NESTED(msk, val, 97) +#define ALT_FTR_SECTION_END_IFSET(msk) \ + ALT_FTR_SECTION_END_NESTED_IFSET(msk, 97) +#define ALT_FTR_SECTION_END_IFCLR(msk) \ + ALT_FTR_SECTION_END_NESTED_IFCLR(msk, 97) + +/* MMU feature dependent sections */ +#define BEGIN_MMU_FTR_SECTION_NESTED(label) START_FTR_SECTION(label) +#define BEGIN_MMU_FTR_SECTION START_FTR_SECTION(97) + +#define END_MMU_FTR_SECTION_NESTED(msk, val, label) \ + FTR_SECTION_ELSE_NESTED(label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __mmu_ftr_fixup) + +#define END_MMU_FTR_SECTION(msk, val) \ + END_MMU_FTR_SECTION_NESTED(msk, val, 97) + +#define END_MMU_FTR_SECTION_NESTED_IFSET(msk, label) \ + END_MMU_FTR_SECTION_NESTED((msk), (msk), label) + +#define END_MMU_FTR_SECTION_IFSET(msk) END_MMU_FTR_SECTION((msk), (msk)) +#define END_MMU_FTR_SECTION_IFCLR(msk) END_MMU_FTR_SECTION((msk), 0) + +/* MMU feature sections with alternatives, use BEGIN_FTR_SECTION to start */ +#define MMU_FTR_SECTION_ELSE_NESTED(label) FTR_SECTION_ELSE_NESTED(label) +#define MMU_FTR_SECTION_ELSE MMU_FTR_SECTION_ELSE_NESTED(97) +#define ALT_MMU_FTR_SECTION_END_NESTED(msk, val, label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __mmu_ftr_fixup) +#define ALT_MMU_FTR_SECTION_END_NESTED_IFSET(msk, label) \ + ALT_MMU_FTR_SECTION_END_NESTED(msk, msk, label) +#define ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(msk, label) \ + ALT_MMU_FTR_SECTION_END_NESTED(msk, 0, label) +#define ALT_MMU_FTR_SECTION_END(msk, val) \ + ALT_MMU_FTR_SECTION_END_NESTED(msk, val, 97) +#define ALT_MMU_FTR_SECTION_END_IFSET(msk) \ + ALT_MMU_FTR_SECTION_END_NESTED_IFSET(msk, 97) +#define ALT_MMU_FTR_SECTION_END_IFCLR(msk) \ + ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(msk, 97) + +/* Firmware feature dependent sections */ +#define BEGIN_FW_FTR_SECTION_NESTED(label) START_FTR_SECTION(label) +#define BEGIN_FW_FTR_SECTION START_FTR_SECTION(97) + +#define END_FW_FTR_SECTION_NESTED(msk, val, label) \ + FTR_SECTION_ELSE_NESTED(label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup) + +#define END_FW_FTR_SECTION(msk, val) \ + END_FW_FTR_SECTION_NESTED(msk, val, 97) + +#define END_FW_FTR_SECTION_IFSET(msk) END_FW_FTR_SECTION((msk), (msk)) +#define END_FW_FTR_SECTION_IFCLR(msk) END_FW_FTR_SECTION((msk), 0) + +/* Firmware feature sections with alternatives */ +#define FW_FTR_SECTION_ELSE_NESTED(label) FTR_SECTION_ELSE_NESTED(label) +#define FW_FTR_SECTION_ELSE FTR_SECTION_ELSE_NESTED(97) +#define ALT_FW_FTR_SECTION_END_NESTED(msk, val, label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup) +#define ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, label) \ + ALT_FW_FTR_SECTION_END_NESTED(msk, msk, label) +#define ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, label) \ + ALT_FW_FTR_SECTION_END_NESTED(msk, 0, label) +#define ALT_FW_FTR_SECTION_END(msk, val) \ + ALT_FW_FTR_SECTION_END_NESTED(msk, val, 97) +#define ALT_FW_FTR_SECTION_END_IFSET(msk) \ + ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, 97) +#define ALT_FW_FTR_SECTION_END_IFCLR(msk) \ + ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, 97) + +#ifndef __ASSEMBLY__ + +#define ASM_FTR_IF(section_if, section_else, msk, val) \ + stringify_in_c(BEGIN_FTR_SECTION) \ + section_if "; " \ + stringify_in_c(FTR_SECTION_ELSE) \ + section_else "; " \ + stringify_in_c(ALT_FTR_SECTION_END((msk), (val))) + +#define ASM_FTR_IFSET(section_if, section_else, msk) \ + ASM_FTR_IF(section_if, section_else, (msk), (msk)) + +#define ASM_FTR_IFCLR(section_if, section_else, msk) \ + ASM_FTR_IF(section_if, section_else, (msk), 0) + +#define ASM_MMU_FTR_IF(section_if, section_else, msk, val) \ + stringify_in_c(BEGIN_MMU_FTR_SECTION) \ + section_if "; " \ + stringify_in_c(MMU_FTR_SECTION_ELSE) \ + section_else "; " \ + stringify_in_c(ALT_MMU_FTR_SECTION_END((msk), (val))) + +#define ASM_MMU_FTR_IFSET(section_if, section_else, msk) \ + ASM_MMU_FTR_IF(section_if, section_else, (msk), (msk)) + +#define ASM_MMU_FTR_IFCLR(section_if, section_else, msk) \ + ASM_MMU_FTR_IF(section_if, section_else, (msk), 0) + +#endif /* __ASSEMBLY__ */ + +/* LWSYNC feature sections */ +#define START_LWSYNC_SECTION(label) label##1: +#define MAKE_LWSYNC_SECTION_ENTRY(label, sect) \ +label##2: \ + .pushsection sect,"a"; \ + .align 2; \ +label##3: \ + FTR_ENTRY_OFFSET label##1b-label##3b; \ + .popsection; + +#define STF_ENTRY_BARRIER_FIXUP_SECTION \ +953: \ + .pushsection __stf_entry_barrier_fixup,"a"; \ + .align 2; \ +954: \ + FTR_ENTRY_OFFSET 953b-954b; \ + .popsection; + +#define STF_EXIT_BARRIER_FIXUP_SECTION \ +955: \ + .pushsection __stf_exit_barrier_fixup,"a"; \ + .align 2; \ +956: \ + FTR_ENTRY_OFFSET 955b-956b; \ + .popsection; + +#define UACCESS_FLUSH_FIXUP_SECTION \ +959: \ + .pushsection __uaccess_flush_fixup,"a"; \ + .align 2; \ +960: \ + FTR_ENTRY_OFFSET 959b-960b; \ + .popsection; + +#define ENTRY_FLUSH_FIXUP_SECTION \ +957: \ + .pushsection __entry_flush_fixup,"a"; \ + .align 2; \ +958: \ + FTR_ENTRY_OFFSET 957b-958b; \ + .popsection; + +#define SCV_ENTRY_FLUSH_FIXUP_SECTION \ +957: \ + .pushsection __scv_entry_flush_fixup,"a"; \ + .align 2; \ +958: \ + FTR_ENTRY_OFFSET 957b-958b; \ + .popsection; + +#define RFI_FLUSH_FIXUP_SECTION \ +951: \ + .pushsection __rfi_flush_fixup,"a"; \ + .align 2; \ +952: \ + FTR_ENTRY_OFFSET 951b-952b; \ + .popsection; + +#define NOSPEC_BARRIER_FIXUP_SECTION \ +953: \ + .pushsection __barrier_nospec_fixup,"a"; \ + .align 2; \ +954: \ + FTR_ENTRY_OFFSET 953b-954b; \ + .popsection; + +#define START_BTB_FLUSH_SECTION \ +955: \ + +#define END_BTB_FLUSH_SECTION \ +956: \ + .pushsection __btb_flush_fixup,"a"; \ + .align 2; \ +957: \ + FTR_ENTRY_OFFSET 955b-957b; \ + FTR_ENTRY_OFFSET 956b-957b; \ + .popsection; + +#ifndef __ASSEMBLY__ +#include <linux/types.h> + +extern long stf_barrier_fallback; +extern long entry_flush_fallback; +extern long scv_entry_flush_fallback; +extern long __start___stf_entry_barrier_fixup, __stop___stf_entry_barrier_fixup; +extern long __start___stf_exit_barrier_fixup, __stop___stf_exit_barrier_fixup; +extern long __start___uaccess_flush_fixup, __stop___uaccess_flush_fixup; +extern long __start___entry_flush_fixup, __stop___entry_flush_fixup; +extern long __start___scv_entry_flush_fixup, __stop___scv_entry_flush_fixup; +extern long __start___rfi_flush_fixup, __stop___rfi_flush_fixup; +extern long __start___barrier_nospec_fixup, __stop___barrier_nospec_fixup; +extern long __start__btb_flush_fixup, __stop__btb_flush_fixup; + +void apply_feature_fixups(void); +void setup_feature_keys(void); +#endif + +#endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */ diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h new file mode 100644 index 000000000..89a31f1c7 --- /dev/null +++ b/arch/powerpc/include/asm/firmware.h @@ -0,0 +1,146 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * Modifications for ppc64: + * Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com> + */ +#ifndef __ASM_POWERPC_FIRMWARE_H +#define __ASM_POWERPC_FIRMWARE_H + +#ifdef __KERNEL__ + +#include <asm/asm-const.h> + +/* firmware feature bitmask values */ + +#define FW_FEATURE_PFT ASM_CONST(0x0000000000000001) +#define FW_FEATURE_TCE ASM_CONST(0x0000000000000002) +#define FW_FEATURE_SPRG0 ASM_CONST(0x0000000000000004) +#define FW_FEATURE_DABR ASM_CONST(0x0000000000000008) +#define FW_FEATURE_COPY ASM_CONST(0x0000000000000010) +#define FW_FEATURE_ASR ASM_CONST(0x0000000000000020) +#define FW_FEATURE_DEBUG ASM_CONST(0x0000000000000040) +#define FW_FEATURE_TERM ASM_CONST(0x0000000000000080) +#define FW_FEATURE_PERF ASM_CONST(0x0000000000000100) +#define FW_FEATURE_DUMP ASM_CONST(0x0000000000000200) +#define FW_FEATURE_INTERRUPT ASM_CONST(0x0000000000000400) +#define FW_FEATURE_MIGRATE ASM_CONST(0x0000000000000800) +#define FW_FEATURE_PERFMON ASM_CONST(0x0000000000001000) +#define FW_FEATURE_CRQ ASM_CONST(0x0000000000002000) +#define FW_FEATURE_VIO ASM_CONST(0x0000000000004000) +#define FW_FEATURE_RDMA ASM_CONST(0x0000000000008000) +#define FW_FEATURE_LLAN ASM_CONST(0x0000000000010000) +#define FW_FEATURE_BULK_REMOVE ASM_CONST(0x0000000000020000) +#define FW_FEATURE_XDABR ASM_CONST(0x0000000000040000) +#define FW_FEATURE_PUT_TCE_IND ASM_CONST(0x0000000000080000) +#define FW_FEATURE_SPLPAR ASM_CONST(0x0000000000100000) +#define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000) +#define FW_FEATURE_PS3_LV1 ASM_CONST(0x0000000000800000) +#define FW_FEATURE_HPT_RESIZE ASM_CONST(0x0000000001000000) +#define FW_FEATURE_CMO ASM_CONST(0x0000000002000000) +#define FW_FEATURE_VPHN ASM_CONST(0x0000000004000000) +#define FW_FEATURE_XCMO ASM_CONST(0x0000000008000000) +#define FW_FEATURE_OPAL ASM_CONST(0x0000000010000000) +#define FW_FEATURE_SET_MODE ASM_CONST(0x0000000040000000) +#define FW_FEATURE_BEST_ENERGY ASM_CONST(0x0000000080000000) +#define FW_FEATURE_FORM1_AFFINITY ASM_CONST(0x0000000100000000) +#define FW_FEATURE_PRRN ASM_CONST(0x0000000200000000) +#define FW_FEATURE_DRMEM_V2 ASM_CONST(0x0000000400000000) +#define FW_FEATURE_DRC_INFO ASM_CONST(0x0000000800000000) +#define FW_FEATURE_BLOCK_REMOVE ASM_CONST(0x0000001000000000) +#define FW_FEATURE_PAPR_SCM ASM_CONST(0x0000002000000000) +#define FW_FEATURE_ULTRAVISOR ASM_CONST(0x0000004000000000) +#define FW_FEATURE_STUFF_TCE ASM_CONST(0x0000008000000000) +#define FW_FEATURE_RPT_INVALIDATE ASM_CONST(0x0000010000000000) +#define FW_FEATURE_FORM2_AFFINITY ASM_CONST(0x0000020000000000) + +#ifndef __ASSEMBLY__ + +enum { +#ifdef CONFIG_PPC64 + FW_FEATURE_PSERIES_POSSIBLE = FW_FEATURE_PFT | FW_FEATURE_TCE | + FW_FEATURE_SPRG0 | FW_FEATURE_DABR | FW_FEATURE_COPY | + FW_FEATURE_ASR | FW_FEATURE_DEBUG | FW_FEATURE_TERM | + FW_FEATURE_PERF | FW_FEATURE_DUMP | FW_FEATURE_INTERRUPT | + FW_FEATURE_MIGRATE | FW_FEATURE_PERFMON | FW_FEATURE_CRQ | + FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN | + FW_FEATURE_BULK_REMOVE | FW_FEATURE_XDABR | + FW_FEATURE_PUT_TCE_IND | FW_FEATURE_STUFF_TCE | + FW_FEATURE_SPLPAR | FW_FEATURE_LPAR | + FW_FEATURE_CMO | FW_FEATURE_VPHN | FW_FEATURE_XCMO | + FW_FEATURE_SET_MODE | FW_FEATURE_BEST_ENERGY | + FW_FEATURE_FORM1_AFFINITY | FW_FEATURE_PRRN | + FW_FEATURE_HPT_RESIZE | FW_FEATURE_DRMEM_V2 | + FW_FEATURE_DRC_INFO | FW_FEATURE_BLOCK_REMOVE | + FW_FEATURE_PAPR_SCM | FW_FEATURE_ULTRAVISOR | + FW_FEATURE_RPT_INVALIDATE | FW_FEATURE_FORM2_AFFINITY, + FW_FEATURE_PSERIES_ALWAYS = 0, + FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_ULTRAVISOR, + FW_FEATURE_POWERNV_ALWAYS = 0, + FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, + FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, + FW_FEATURE_NATIVE_POSSIBLE = 0, + FW_FEATURE_NATIVE_ALWAYS = 0, + FW_FEATURE_POSSIBLE = +#ifdef CONFIG_PPC_PSERIES + FW_FEATURE_PSERIES_POSSIBLE | +#endif +#ifdef CONFIG_PPC_POWERNV + FW_FEATURE_POWERNV_POSSIBLE | +#endif +#ifdef CONFIG_PPC_PS3 + FW_FEATURE_PS3_POSSIBLE | +#endif +#ifdef CONFIG_PPC_NATIVE + FW_FEATURE_NATIVE_ALWAYS | +#endif + 0, + FW_FEATURE_ALWAYS = +#ifdef CONFIG_PPC_PSERIES + FW_FEATURE_PSERIES_ALWAYS & +#endif +#ifdef CONFIG_PPC_POWERNV + FW_FEATURE_POWERNV_ALWAYS & +#endif +#ifdef CONFIG_PPC_PS3 + FW_FEATURE_PS3_ALWAYS & +#endif +#ifdef CONFIG_PPC_NATIVE + FW_FEATURE_NATIVE_ALWAYS & +#endif + FW_FEATURE_POSSIBLE, + +#else /* CONFIG_PPC64 */ + FW_FEATURE_POSSIBLE = 0, + FW_FEATURE_ALWAYS = 0, +#endif +}; + +/* This is used to identify firmware features which are available + * to the kernel. + */ +extern unsigned long powerpc_firmware_features; + +#define firmware_has_feature(feature) \ + ((FW_FEATURE_ALWAYS & (feature)) || \ + (FW_FEATURE_POSSIBLE & powerpc_firmware_features & (feature))) + +extern void system_reset_fwnmi(void); +extern void machine_check_fwnmi(void); + +/* This is true if we are using the firmware NMI handler (typically LPAR) */ +extern int fwnmi_active; +extern int ibm_nmi_interlock_token; + +extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup; + +#ifdef CONFIG_PPC_PSERIES +void pseries_probe_fw_features(void); +#else +static inline void pseries_probe_fw_features(void) { }; +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_FIRMWARE_H */ diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h new file mode 100644 index 000000000..897cc6875 --- /dev/null +++ b/arch/powerpc/include/asm/fixmap.h @@ -0,0 +1,123 @@ +/* + * fixmap.h: compile-time virtual memory allocation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998 Ingo Molnar + * + * Copyright 2008 Freescale Semiconductor Inc. + * Port to powerpc added by Kumar Gala + */ + +#ifndef _ASM_FIXMAP_H +#define _ASM_FIXMAP_H + +#ifndef __ASSEMBLY__ +#include <linux/sizes.h> +#include <linux/pgtable.h> +#include <asm/page.h> +#ifdef CONFIG_HIGHMEM +#include <linux/threads.h> +#include <asm/kmap_types.h> +#endif + +#ifdef CONFIG_PPC64 +#define FIXADDR_TOP (IOREMAP_END + FIXADDR_SIZE) +#else +#define FIXADDR_SIZE 0 +#ifdef CONFIG_KASAN +#include <asm/kasan.h> +#define FIXADDR_TOP (KASAN_SHADOW_START - PAGE_SIZE) +#else +#define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE)) +#endif +#endif + +/* + * Here we define all the compile-time 'special' virtual + * addresses. The point is to have a constant address at + * compile time, but to set the physical address only + * in the boot process. We allocate these special addresses + * from the end of virtual memory (0xfffff000) backwards. + * Also this lets us do fail-safe vmalloc(), we + * can guarantee that these special addresses and + * vmalloc()-ed addresses never overlap. + * + * these 'compile-time allocated' memory buffers are + * fixed-size 4k pages. (or larger if used with an increment + * highger than 1) use fixmap_set(idx,phys) to associate + * physical memory with fixmap indices. + * + * TLB entries of such buffers will not be flushed across + * task switches. + */ +enum fixed_addresses { + FIX_HOLE, +#ifdef CONFIG_PPC32 + /* reserve the top 128K for early debugging purposes */ + FIX_EARLY_DEBUG_TOP = FIX_HOLE, + FIX_EARLY_DEBUG_BASE = FIX_EARLY_DEBUG_TOP+(ALIGN(SZ_128K, PAGE_SIZE)/PAGE_SIZE)-1, +#ifdef CONFIG_HIGHMEM + FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ + FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, +#endif +#ifdef CONFIG_PPC_8xx + /* For IMMR we need an aligned 512K area */ +#define FIX_IMMR_SIZE (512 * 1024 / PAGE_SIZE) + FIX_IMMR_START, + FIX_IMMR_BASE = __ALIGN_MASK(FIX_IMMR_START, FIX_IMMR_SIZE - 1) - 1 + + FIX_IMMR_SIZE, +#endif +#ifdef CONFIG_PPC_83xx + /* For IMMR we need an aligned 2M area */ +#define FIX_IMMR_SIZE (SZ_2M / PAGE_SIZE) + FIX_IMMR_START, + FIX_IMMR_BASE = __ALIGN_MASK(FIX_IMMR_START, FIX_IMMR_SIZE - 1) - 1 + + FIX_IMMR_SIZE, +#endif + /* FIX_PCIE_MCFG, */ +#endif /* CONFIG_PPC32 */ + __end_of_permanent_fixed_addresses, + +#define NR_FIX_BTMAPS (SZ_256K / PAGE_SIZE) +#define FIX_BTMAPS_SLOTS 16 +#define TOTAL_FIX_BTMAPS (NR_FIX_BTMAPS * FIX_BTMAPS_SLOTS) + + FIX_BTMAP_END = __end_of_permanent_fixed_addresses, + FIX_BTMAP_BEGIN = FIX_BTMAP_END + TOTAL_FIX_BTMAPS - 1, + __end_of_fixed_addresses +}; + +#define __FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) +#define FIXADDR_START (FIXADDR_TOP - __FIXADDR_SIZE) + +#define FIXMAP_ALIGNED_SIZE (ALIGN(FIXADDR_TOP, PGDIR_SIZE) - \ + ALIGN_DOWN(FIXADDR_START, PGDIR_SIZE)) +#define FIXMAP_PTE_SIZE (FIXMAP_ALIGNED_SIZE / PGDIR_SIZE * PTE_TABLE_SIZE) + +#define FIXMAP_PAGE_NOCACHE PAGE_KERNEL_NCG +#define FIXMAP_PAGE_IO PAGE_KERNEL_NCG + +#include <asm-generic/fixmap.h> + +static inline void __set_fixmap(enum fixed_addresses idx, + phys_addr_t phys, pgprot_t flags) +{ + BUILD_BUG_ON(IS_ENABLED(CONFIG_PPC64) && __FIXADDR_SIZE > FIXADDR_SIZE); + + if (__builtin_constant_p(idx)) + BUILD_BUG_ON(idx >= __end_of_fixed_addresses); + else if (WARN_ON(idx >= __end_of_fixed_addresses)) + return; + if (pgprot_val(flags)) + map_kernel_page(__fix_to_virt(idx), phys, flags); + else + unmap_kernel_page(__fix_to_virt(idx)); +} + +#define __early_set_fixmap __set_fixmap + +#endif /* !__ASSEMBLY__ */ +#endif diff --git a/arch/powerpc/include/asm/floppy.h b/arch/powerpc/include/asm/floppy.h new file mode 100644 index 000000000..7af9a68fd --- /dev/null +++ b/arch/powerpc/include/asm/floppy.h @@ -0,0 +1,212 @@ +/* + * Architecture specific parts of the Floppy driver + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 + */ +#ifndef __ASM_POWERPC_FLOPPY_H +#define __ASM_POWERPC_FLOPPY_H +#ifdef __KERNEL__ + +#include <asm/machdep.h> + +#define fd_inb(base, reg) inb_p((base) + (reg)) +#define fd_outb(value, base, reg) outb_p(value, (base) + (reg)) + +#define fd_enable_dma() enable_dma(FLOPPY_DMA) +#define fd_disable_dma() fd_ops->_disable_dma(FLOPPY_DMA) +#define fd_free_dma() fd_ops->_free_dma(FLOPPY_DMA) +#define fd_clear_dma_ff() clear_dma_ff(FLOPPY_DMA) +#define fd_set_dma_mode(mode) set_dma_mode(FLOPPY_DMA, mode) +#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA, count) +#define fd_get_dma_residue() fd_ops->_get_dma_residue(FLOPPY_DMA) +#define fd_enable_irq() enable_irq(FLOPPY_IRQ) +#define fd_disable_irq() disable_irq(FLOPPY_IRQ) +#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL); + +#include <linux/pci.h> +#include <asm/ppc-pci.h> /* for isa_bridge_pcidev */ + +#define fd_dma_setup(addr,size,mode,io) fd_ops->_dma_setup(addr,size,mode,io) + +static int fd_request_dma(void); + +struct fd_dma_ops { + void (*_disable_dma)(unsigned int dmanr); + void (*_free_dma)(unsigned int dmanr); + int (*_get_dma_residue)(unsigned int dummy); + int (*_dma_setup)(char *addr, unsigned long size, int mode, int io); +}; + +static int virtual_dma_count; +static int virtual_dma_residue; +static char *virtual_dma_addr; +static int virtual_dma_mode; +static int doing_vdma; +static struct fd_dma_ops *fd_ops; + +static irqreturn_t floppy_hardint(int irq, void *dev_id) +{ + unsigned char st; + int lcount; + char *lptr; + + if (!doing_vdma) + return floppy_interrupt(irq, dev_id); + + + st = 1; + for (lcount=virtual_dma_count, lptr=virtual_dma_addr; + lcount; lcount--, lptr++) { + st = inb(virtual_dma_port + FD_STATUS); + st &= STATUS_DMA | STATUS_READY; + if (st != (STATUS_DMA | STATUS_READY)) + break; + if (virtual_dma_mode) + outb_p(*lptr, virtual_dma_port + FD_DATA); + else + *lptr = inb_p(virtual_dma_port + FD_DATA); + } + virtual_dma_count = lcount; + virtual_dma_addr = lptr; + st = inb(virtual_dma_port + FD_STATUS); + + if (st == STATUS_DMA) + return IRQ_HANDLED; + if (!(st & STATUS_DMA)) { + virtual_dma_residue += virtual_dma_count; + virtual_dma_count=0; + doing_vdma = 0; + floppy_interrupt(irq, dev_id); + return IRQ_HANDLED; + } + return IRQ_HANDLED; +} + +static void vdma_disable_dma(unsigned int dummy) +{ + doing_vdma = 0; + virtual_dma_residue += virtual_dma_count; + virtual_dma_count=0; +} + +static void vdma_nop(unsigned int dummy) +{ +} + + +static int vdma_get_dma_residue(unsigned int dummy) +{ + return virtual_dma_count + virtual_dma_residue; +} + + +static int fd_request_irq(void) +{ + if (can_use_virtual_dma) + return request_irq(FLOPPY_IRQ, floppy_hardint, + 0, "floppy", NULL); + else + return request_irq(FLOPPY_IRQ, floppy_interrupt, + 0, "floppy", NULL); +} + +static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io) +{ + doing_vdma = 1; + virtual_dma_port = io; + virtual_dma_mode = (mode == DMA_MODE_WRITE); + virtual_dma_addr = addr; + virtual_dma_count = size; + virtual_dma_residue = 0; + return 0; +} + +static int hard_dma_setup(char *addr, unsigned long size, int mode, int io) +{ + static unsigned long prev_size; + static dma_addr_t bus_addr = 0; + static char *prev_addr; + static int prev_dir; + int dir; + + doing_vdma = 0; + dir = (mode == DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE; + + if (bus_addr + && (addr != prev_addr || size != prev_size || dir != prev_dir)) { + /* different from last time -- unmap prev */ + pci_unmap_single(isa_bridge_pcidev, bus_addr, prev_size, prev_dir); + bus_addr = 0; + } + + if (!bus_addr) /* need to map it */ + bus_addr = pci_map_single(isa_bridge_pcidev, addr, size, dir); + + /* remember this one as prev */ + prev_addr = addr; + prev_size = size; + prev_dir = dir; + + fd_clear_dma_ff(); + fd_set_dma_mode(mode); + set_dma_addr(FLOPPY_DMA, bus_addr); + fd_set_dma_count(size); + virtual_dma_port = io; + fd_enable_dma(); + + return 0; +} + +static struct fd_dma_ops real_dma_ops = +{ + ._disable_dma = disable_dma, + ._free_dma = free_dma, + ._get_dma_residue = get_dma_residue, + ._dma_setup = hard_dma_setup +}; + +static struct fd_dma_ops virt_dma_ops = +{ + ._disable_dma = vdma_disable_dma, + ._free_dma = vdma_nop, + ._get_dma_residue = vdma_get_dma_residue, + ._dma_setup = vdma_dma_setup +}; + +static int fd_request_dma(void) +{ + if (can_use_virtual_dma & 1) { + fd_ops = &virt_dma_ops; + return 0; + } + else { + fd_ops = &real_dma_ops; + return request_dma(FLOPPY_DMA, "floppy"); + } +} + +static int FDC1 = 0x3f0; +static int FDC2 = -1; + +/* + * Again, the CMOS information not available + */ +#define FLOPPY0_TYPE 6 +#define FLOPPY1_TYPE 0 + +#define N_FDC 2 /* Don't change this! */ +#define N_DRIVE 8 + +/* + * The PowerPC has no problems with floppy DMA crossing 64k borders. + */ +#define CROSS_64KB(a,s) (0) + +#define EXTRA_FLOPPY_PARAMS + +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_FLOPPY_H */ diff --git a/arch/powerpc/include/asm/fs_pd.h b/arch/powerpc/include/asm/fs_pd.h new file mode 100644 index 000000000..8def56ec0 --- /dev/null +++ b/arch/powerpc/include/asm/fs_pd.h @@ -0,0 +1,49 @@ +/* + * Platform information definitions. + * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug <vbordug@ru.mvista.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef FS_PD_H +#define FS_PD_H +#include <sysdev/fsl_soc.h> +#include <asm/time.h> + +#ifdef CONFIG_CPM2 +#include <asm/cpm2.h> + +#if defined(CONFIG_8260) +#include <asm/mpc8260.h> +#endif + +#define cpm2_map(member) (&cpm2_immr->member) +#define cpm2_map_size(member, size) (&cpm2_immr->member) +#define cpm2_unmap(addr) do {} while(0) +#endif + +#ifdef CONFIG_PPC_8xx +#include <asm/8xx_immap.h> + +extern immap_t __iomem *mpc8xx_immr; + +#define immr_map(member) (&mpc8xx_immr->member) +#define immr_map_size(member, size) (&mpc8xx_immr->member) +#define immr_unmap(addr) do {} while (0) +#endif + +static inline int uart_baudrate(void) +{ + return get_baudrate(); +} + +static inline int uart_clock(void) +{ + return ppc_proc_freq; +} + +#endif diff --git a/arch/powerpc/include/asm/fsl_85xx_cache_sram.h b/arch/powerpc/include/asm/fsl_85xx_cache_sram.h new file mode 100644 index 000000000..0235a0447 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_85xx_cache_sram.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2009 Freescale Semiconductor, Inc. + * + * Cache SRAM handling for QorIQ platform + * + * Author: Vivek Mahajan <vivek.mahajan@freescale.com> + + * This file is derived from the original work done + * by Sylvain Munaut for the Bestcomm SRAM allocator. + */ + +#ifndef __ASM_POWERPC_FSL_85XX_CACHE_SRAM_H__ +#define __ASM_POWERPC_FSL_85XX_CACHE_SRAM_H__ + +#include <asm/rheap.h> +#include <linux/spinlock.h> + +/* + * Cache-SRAM + */ + +struct mpc85xx_cache_sram { + phys_addr_t base_phys; + void *base_virt; + unsigned int size; + rh_info_t *rh; + spinlock_t lock; +}; + +extern void mpc85xx_cache_sram_free(void *ptr); +extern void *mpc85xx_cache_sram_alloc(unsigned int size, + phys_addr_t *phys, unsigned int align); + +#endif /* __AMS_POWERPC_FSL_85XX_CACHE_SRAM_H__ */ diff --git a/arch/powerpc/include/asm/fsl_gtm.h b/arch/powerpc/include/asm/fsl_gtm.h new file mode 100644 index 000000000..6ff687650 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_gtm.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Freescale General-purpose Timers Module + * + * Copyright 2006 Freescale Semiconductor, Inc. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + */ + +#ifndef __ASM_FSL_GTM_H +#define __ASM_FSL_GTM_H + +#include <linux/types.h> + +struct gtm; + +struct gtm_timer { + unsigned int irq; + + struct gtm *gtm; + bool requested; + u8 __iomem *gtcfr; + __be16 __iomem *gtmdr; + __be16 __iomem *gtpsr; + __be16 __iomem *gtcnr; + __be16 __iomem *gtrfr; + __be16 __iomem *gtevr; +}; + +extern struct gtm_timer *gtm_get_timer16(void); +extern struct gtm_timer *gtm_get_specific_timer16(struct gtm *gtm, + unsigned int timer); +extern void gtm_put_timer16(struct gtm_timer *tmr); +extern int gtm_set_timer16(struct gtm_timer *tmr, unsigned long usec, + bool reload); +extern int gtm_set_exact_timer16(struct gtm_timer *tmr, u16 usec, + bool reload); +extern void gtm_stop_timer16(struct gtm_timer *tmr); +extern void gtm_ack_timer16(struct gtm_timer *tmr, u16 events); + +#endif /* __ASM_FSL_GTM_H */ diff --git a/arch/powerpc/include/asm/fsl_hcalls.h b/arch/powerpc/include/asm/fsl_hcalls.h new file mode 100644 index 000000000..b889d1354 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_hcalls.h @@ -0,0 +1,655 @@ +/* + * Freescale hypervisor call interface + * + * Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * Author: Timur Tabi <timur@freescale.com> + * + * This file is provided under a dual BSD/GPL license. When using or + * redistributing this file, you may do so under either license. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _FSL_HCALLS_H +#define _FSL_HCALLS_H + +#include <linux/types.h> +#include <linux/errno.h> +#include <asm/byteorder.h> +#include <asm/epapr_hcalls.h> + +#define FH_API_VERSION 1 + +#define FH_ERR_GET_INFO 1 +#define FH_PARTITION_GET_DTPROP 2 +#define FH_PARTITION_SET_DTPROP 3 +#define FH_PARTITION_RESTART 4 +#define FH_PARTITION_GET_STATUS 5 +#define FH_PARTITION_START 6 +#define FH_PARTITION_STOP 7 +#define FH_PARTITION_MEMCPY 8 +#define FH_DMA_ENABLE 9 +#define FH_DMA_DISABLE 10 +#define FH_SEND_NMI 11 +#define FH_VMPIC_GET_MSIR 12 +#define FH_SYSTEM_RESET 13 +#define FH_GET_CORE_STATE 14 +#define FH_ENTER_NAP 15 +#define FH_EXIT_NAP 16 +#define FH_CLAIM_DEVICE 17 +#define FH_PARTITION_STOP_DMA 18 + +/* vendor ID: Freescale Semiconductor */ +#define FH_HCALL_TOKEN(num) _EV_HCALL_TOKEN(EV_FSL_VENDOR_ID, num) + +/* + * We use "uintptr_t" to define a register because it's guaranteed to be a + * 32-bit integer on a 32-bit platform, and a 64-bit integer on a 64-bit + * platform. + * + * All registers are either input/output or output only. Registers that are + * initialized before making the hypercall are input/output. All + * input/output registers are represented with "+r". Output-only registers + * are represented with "=r". Do not specify any unused registers. The + * clobber list will tell the compiler that the hypercall modifies those + * registers, which is good enough. + */ + +/** + * fh_send_nmi - send NMI to virtual cpu(s). + * @vcpu_mask: send NMI to virtual cpu(s) specified by this mask. + * + * Returns 0 for success, or EINVAL for invalid vcpu_mask. + */ +static inline unsigned int fh_send_nmi(unsigned int vcpu_mask) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_SEND_NMI); + r3 = vcpu_mask; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +/* Arbitrary limits to avoid excessive memory allocation in hypervisor */ +#define FH_DTPROP_MAX_PATHLEN 4096 +#define FH_DTPROP_MAX_PROPLEN 32768 + +/** + * fh_partition_get_dtprop - get a property from a guest device tree. + * @handle: handle of partition whose device tree is to be accessed + * @dtpath_addr: physical address of device tree path to access + * @propname_addr: physical address of name of property + * @propvalue_addr: physical address of property value buffer + * @propvalue_len: length of buffer on entry, length of property on return + * + * Returns zero on success, non-zero on error. + */ +static inline unsigned int fh_partition_get_dtprop(int handle, + uint64_t dtpath_addr, + uint64_t propname_addr, + uint64_t propvalue_addr, + uint32_t *propvalue_len) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + register uintptr_t r7 __asm__("r7"); + register uintptr_t r8 __asm__("r8"); + register uintptr_t r9 __asm__("r9"); + register uintptr_t r10 __asm__("r10"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_GET_DTPROP); + r3 = handle; + +#ifdef CONFIG_PHYS_64BIT + r4 = dtpath_addr >> 32; + r6 = propname_addr >> 32; + r8 = propvalue_addr >> 32; +#else + r4 = 0; + r6 = 0; + r8 = 0; +#endif + r5 = (uint32_t)dtpath_addr; + r7 = (uint32_t)propname_addr; + r9 = (uint32_t)propvalue_addr; + r10 = *propvalue_len; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), + "+r" (r3), "+r" (r4), "+r" (r5), "+r" (r6), "+r" (r7), + "+r" (r8), "+r" (r9), "+r" (r10) + : : EV_HCALL_CLOBBERS8 + ); + + *propvalue_len = r4; + return r3; +} + +/** + * Set a property in a guest device tree. + * @handle: handle of partition whose device tree is to be accessed + * @dtpath_addr: physical address of device tree path to access + * @propname_addr: physical address of name of property + * @propvalue_addr: physical address of property value + * @propvalue_len: length of property + * + * Returns zero on success, non-zero on error. + */ +static inline unsigned int fh_partition_set_dtprop(int handle, + uint64_t dtpath_addr, + uint64_t propname_addr, + uint64_t propvalue_addr, + uint32_t propvalue_len) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r6 __asm__("r6"); + register uintptr_t r8 __asm__("r8"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r7 __asm__("r7"); + register uintptr_t r9 __asm__("r9"); + register uintptr_t r10 __asm__("r10"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_SET_DTPROP); + r3 = handle; + +#ifdef CONFIG_PHYS_64BIT + r4 = dtpath_addr >> 32; + r6 = propname_addr >> 32; + r8 = propvalue_addr >> 32; +#else + r4 = 0; + r6 = 0; + r8 = 0; +#endif + r5 = (uint32_t)dtpath_addr; + r7 = (uint32_t)propname_addr; + r9 = (uint32_t)propvalue_addr; + r10 = propvalue_len; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), + "+r" (r3), "+r" (r4), "+r" (r5), "+r" (r6), "+r" (r7), + "+r" (r8), "+r" (r9), "+r" (r10) + : : EV_HCALL_CLOBBERS8 + ); + + return r3; +} + +/** + * fh_partition_restart - reboot the current partition + * @partition: partition ID + * + * Returns an error code if reboot failed. Does not return if it succeeds. + */ +static inline unsigned int fh_partition_restart(unsigned int partition) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_RESTART); + r3 = partition; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +#define FH_PARTITION_STOPPED 0 +#define FH_PARTITION_RUNNING 1 +#define FH_PARTITION_STARTING 2 +#define FH_PARTITION_STOPPING 3 +#define FH_PARTITION_PAUSING 4 +#define FH_PARTITION_PAUSED 5 +#define FH_PARTITION_RESUMING 6 + +/** + * fh_partition_get_status - gets the status of a partition + * @partition: partition ID + * @status: returned status code + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_partition_get_status(unsigned int partition, + unsigned int *status) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_GET_STATUS); + r3 = partition; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "=r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + *status = r4; + + return r3; +} + +/** + * fh_partition_start - boots and starts execution of the specified partition + * @partition: partition ID + * @entry_point: guest physical address to start execution + * + * The hypervisor creates a 1-to-1 virtual/physical IMA mapping, so at boot + * time, guest physical address are the same as guest virtual addresses. + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_partition_start(unsigned int partition, + uint32_t entry_point, int load) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_START); + r3 = partition; + r4 = entry_point; + r5 = load; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "+r" (r4), "+r" (r5) + : : EV_HCALL_CLOBBERS3 + ); + + return r3; +} + +/** + * fh_partition_stop - stops another partition + * @partition: partition ID + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_partition_stop(unsigned int partition) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_STOP); + r3 = partition; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +/** + * struct fh_sg_list: definition of the fh_partition_memcpy S/G list + * @source: guest physical address to copy from + * @target: guest physical address to copy to + * @size: number of bytes to copy + * @reserved: reserved, must be zero + * + * The scatter/gather list for fh_partition_memcpy() is an array of these + * structures. The array must be guest physically contiguous. + * + * This structure must be aligned on 32-byte boundary, so that no single + * strucuture can span two pages. + */ +struct fh_sg_list { + uint64_t source; /**< guest physical address to copy from */ + uint64_t target; /**< guest physical address to copy to */ + uint64_t size; /**< number of bytes to copy */ + uint64_t reserved; /**< reserved, must be zero */ +} __attribute__ ((aligned(32))); + +/** + * fh_partition_memcpy - copies data from one guest to another + * @source: the ID of the partition to copy from + * @target: the ID of the partition to copy to + * @sg_list: guest physical address of an array of &fh_sg_list structures + * @count: the number of entries in @sg_list + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_partition_memcpy(unsigned int source, + unsigned int target, phys_addr_t sg_list, unsigned int count) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + register uintptr_t r7 __asm__("r7"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_MEMCPY); + r3 = source; + r4 = target; + r5 = (uint32_t) sg_list; + +#ifdef CONFIG_PHYS_64BIT + r6 = sg_list >> 32; +#else + r6 = 0; +#endif + r7 = count; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), + "+r" (r3), "+r" (r4), "+r" (r5), "+r" (r6), "+r" (r7) + : : EV_HCALL_CLOBBERS5 + ); + + return r3; +} + +/** + * fh_dma_enable - enable DMA for the specified device + * @liodn: the LIODN of the I/O device for which to enable DMA + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_dma_enable(unsigned int liodn) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_DMA_ENABLE); + r3 = liodn; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +/** + * fh_dma_disable - disable DMA for the specified device + * @liodn: the LIODN of the I/O device for which to disable DMA + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_dma_disable(unsigned int liodn) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_DMA_DISABLE); + r3 = liodn; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + + +/** + * fh_vmpic_get_msir - returns the MPIC-MSI register value + * @interrupt: the interrupt number + * @msir_val: returned MPIC-MSI register value + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_vmpic_get_msir(unsigned int interrupt, + unsigned int *msir_val) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = FH_HCALL_TOKEN(FH_VMPIC_GET_MSIR); + r3 = interrupt; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "=r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + *msir_val = r4; + + return r3; +} + +/** + * fh_system_reset - reset the system + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_system_reset(void) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_SYSTEM_RESET); + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "=r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + + +/** + * fh_err_get_info - get platform error information + * @queue id: + * 0 for guest error event queue + * 1 for global error event queue + * + * @pointer to store the platform error data: + * platform error data is returned in registers r4 - r11 + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_err_get_info(int queue, uint32_t *bufsize, + uint32_t addr_hi, uint32_t addr_lo, int peek) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + register uintptr_t r7 __asm__("r7"); + + r11 = FH_HCALL_TOKEN(FH_ERR_GET_INFO); + r3 = queue; + r4 = *bufsize; + r5 = addr_hi; + r6 = addr_lo; + r7 = peek; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "+r" (r4), "+r" (r5), "+r" (r6), + "+r" (r7) + : : EV_HCALL_CLOBBERS5 + ); + + *bufsize = r4; + + return r3; +} + + +#define FH_VCPU_RUN 0 +#define FH_VCPU_IDLE 1 +#define FH_VCPU_NAP 2 + +/** + * fh_get_core_state - get the state of a vcpu + * + * @handle: handle of partition containing the vcpu + * @vcpu: vcpu number within the partition + * @state:the current state of the vcpu, see FH_VCPU_* + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_get_core_state(unsigned int handle, + unsigned int vcpu, unsigned int *state) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = FH_HCALL_TOKEN(FH_GET_CORE_STATE); + r3 = handle; + r4 = vcpu; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "+r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + *state = r4; + return r3; +} + +/** + * fh_enter_nap - enter nap on a vcpu + * + * Note that though the API supports entering nap on a vcpu other + * than the caller, this may not be implmented and may return EINVAL. + * + * @handle: handle of partition containing the vcpu + * @vcpu: vcpu number within the partition + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_enter_nap(unsigned int handle, unsigned int vcpu) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = FH_HCALL_TOKEN(FH_ENTER_NAP); + r3 = handle; + r4 = vcpu; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "+r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + return r3; +} + +/** + * fh_exit_nap - exit nap on a vcpu + * @handle: handle of partition containing the vcpu + * @vcpu: vcpu number within the partition + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_exit_nap(unsigned int handle, unsigned int vcpu) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = FH_HCALL_TOKEN(FH_EXIT_NAP); + r3 = handle; + r4 = vcpu; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "+r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + return r3; +} +/** + * fh_claim_device - claim a "claimable" shared device + * @handle: fsl,hv-device-handle of node to claim + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_claim_device(unsigned int handle) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_CLAIM_DEVICE); + r3 = handle; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +/** + * Run deferred DMA disabling on a partition's private devices + * + * This applies to devices which a partition owns either privately, + * or which are claimable and still actively owned by that partition, + * and which do not have the no-dma-disable property. + * + * @handle: partition (must be stopped) whose DMA is to be disabled + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_partition_stop_dma(unsigned int handle) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_STOP_DMA); + r3 = handle; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} +#endif diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h new file mode 100644 index 000000000..c4af5ee71 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -0,0 +1,296 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* Freescale Local Bus Controller + * + * Copyright © 2006-2007, 2010 Freescale Semiconductor + * + * Authors: Nick Spence <nick.spence@freescale.com>, + * Scott Wood <scottwood@freescale.com> + * Jack Lan <jack.lan@freescale.com> + */ + +#ifndef __ASM_FSL_LBC_H +#define __ASM_FSL_LBC_H + +#include <linux/compiler.h> +#include <linux/types.h> +#include <linux/io.h> +#include <linux/device.h> +#include <linux/spinlock.h> + +struct fsl_lbc_bank { + __be32 br; /**< Base Register */ +#define BR_BA 0xFFFF8000 +#define BR_BA_SHIFT 15 +#define BR_PS 0x00001800 +#define BR_PS_SHIFT 11 +#define BR_PS_8 0x00000800 /* Port Size 8 bit */ +#define BR_PS_16 0x00001000 /* Port Size 16 bit */ +#define BR_PS_32 0x00001800 /* Port Size 32 bit */ +#define BR_DECC 0x00000600 +#define BR_DECC_SHIFT 9 +#define BR_DECC_OFF 0x00000000 /* HW ECC checking and generation off */ +#define BR_DECC_CHK 0x00000200 /* HW ECC checking on, generation off */ +#define BR_DECC_CHK_GEN 0x00000400 /* HW ECC checking and generation on */ +#define BR_WP 0x00000100 +#define BR_WP_SHIFT 8 +#define BR_MSEL 0x000000E0 +#define BR_MSEL_SHIFT 5 +#define BR_MS_GPCM 0x00000000 /* GPCM */ +#define BR_MS_FCM 0x00000020 /* FCM */ +#define BR_MS_SDRAM 0x00000060 /* SDRAM */ +#define BR_MS_UPMA 0x00000080 /* UPMA */ +#define BR_MS_UPMB 0x000000A0 /* UPMB */ +#define BR_MS_UPMC 0x000000C0 /* UPMC */ +#define BR_V 0x00000001 +#define BR_V_SHIFT 0 +#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V) + + __be32 or; /**< Base Register */ +#define OR0 0x5004 +#define OR1 0x500C +#define OR2 0x5014 +#define OR3 0x501C +#define OR4 0x5024 +#define OR5 0x502C +#define OR6 0x5034 +#define OR7 0x503C + +#define OR_FCM_AM 0xFFFF8000 +#define OR_FCM_AM_SHIFT 15 +#define OR_FCM_BCTLD 0x00001000 +#define OR_FCM_BCTLD_SHIFT 12 +#define OR_FCM_PGS 0x00000400 +#define OR_FCM_PGS_SHIFT 10 +#define OR_FCM_CSCT 0x00000200 +#define OR_FCM_CSCT_SHIFT 9 +#define OR_FCM_CST 0x00000100 +#define OR_FCM_CST_SHIFT 8 +#define OR_FCM_CHT 0x00000080 +#define OR_FCM_CHT_SHIFT 7 +#define OR_FCM_SCY 0x00000070 +#define OR_FCM_SCY_SHIFT 4 +#define OR_FCM_SCY_1 0x00000010 +#define OR_FCM_SCY_2 0x00000020 +#define OR_FCM_SCY_3 0x00000030 +#define OR_FCM_SCY_4 0x00000040 +#define OR_FCM_SCY_5 0x00000050 +#define OR_FCM_SCY_6 0x00000060 +#define OR_FCM_SCY_7 0x00000070 +#define OR_FCM_RST 0x00000008 +#define OR_FCM_RST_SHIFT 3 +#define OR_FCM_TRLX 0x00000004 +#define OR_FCM_TRLX_SHIFT 2 +#define OR_FCM_EHTR 0x00000002 +#define OR_FCM_EHTR_SHIFT 1 + +#define OR_GPCM_AM 0xFFFF8000 +#define OR_GPCM_AM_SHIFT 15 +}; + +struct fsl_lbc_regs { + struct fsl_lbc_bank bank[12]; + u8 res0[0x8]; + __be32 mar; /**< UPM Address Register */ + u8 res1[0x4]; + __be32 mamr; /**< UPMA Mode Register */ +#define MxMR_OP_NO (0 << 28) /**< normal operation */ +#define MxMR_OP_WA (1 << 28) /**< write array */ +#define MxMR_OP_RA (2 << 28) /**< read array */ +#define MxMR_OP_RP (3 << 28) /**< run pattern */ +#define MxMR_MAD 0x3f /**< machine address */ + __be32 mbmr; /**< UPMB Mode Register */ + __be32 mcmr; /**< UPMC Mode Register */ + u8 res2[0x8]; + __be32 mrtpr; /**< Memory Refresh Timer Prescaler Register */ + __be32 mdr; /**< UPM Data Register */ + u8 res3[0x4]; + __be32 lsor; /**< Special Operation Initiation Register */ + __be32 lsdmr; /**< SDRAM Mode Register */ + u8 res4[0x8]; + __be32 lurt; /**< UPM Refresh Timer */ + __be32 lsrt; /**< SDRAM Refresh Timer */ + u8 res5[0x8]; + __be32 ltesr; /**< Transfer Error Status Register */ +#define LTESR_BM 0x80000000 +#define LTESR_FCT 0x40000000 +#define LTESR_PAR 0x20000000 +#define LTESR_WP 0x04000000 +#define LTESR_ATMW 0x00800000 +#define LTESR_ATMR 0x00400000 +#define LTESR_CS 0x00080000 +#define LTESR_UPM 0x00000002 +#define LTESR_CC 0x00000001 +#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC) +#define LTESR_MASK (LTESR_BM | LTESR_FCT | LTESR_PAR | LTESR_WP \ + | LTESR_ATMW | LTESR_ATMR | LTESR_CS | LTESR_UPM \ + | LTESR_CC) +#define LTESR_CLEAR 0xFFFFFFFF +#define LTECCR_CLEAR 0xFFFFFFFF +#define LTESR_STATUS LTESR_MASK +#define LTEIR_ENABLE LTESR_MASK +#define LTEDR_ENABLE 0x00000000 + __be32 ltedr; /**< Transfer Error Disable Register */ + __be32 lteir; /**< Transfer Error Interrupt Register */ + __be32 lteatr; /**< Transfer Error Attributes Register */ + __be32 ltear; /**< Transfer Error Address Register */ + __be32 lteccr; /**< Transfer Error ECC Register */ + u8 res6[0x8]; + __be32 lbcr; /**< Configuration Register */ +#define LBCR_LDIS 0x80000000 +#define LBCR_LDIS_SHIFT 31 +#define LBCR_BCTLC 0x00C00000 +#define LBCR_BCTLC_SHIFT 22 +#define LBCR_AHD 0x00200000 +#define LBCR_LPBSE 0x00020000 +#define LBCR_LPBSE_SHIFT 17 +#define LBCR_EPAR 0x00010000 +#define LBCR_EPAR_SHIFT 16 +#define LBCR_BMT 0x0000FF00 +#define LBCR_BMT_SHIFT 8 +#define LBCR_BMTPS 0x0000000F +#define LBCR_BMTPS_SHIFT 0 +#define LBCR_INIT 0x00040000 + __be32 lcrr; /**< Clock Ratio Register */ +#define LCRR_DBYP 0x80000000 +#define LCRR_DBYP_SHIFT 31 +#define LCRR_BUFCMDC 0x30000000 +#define LCRR_BUFCMDC_SHIFT 28 +#define LCRR_ECL 0x03000000 +#define LCRR_ECL_SHIFT 24 +#define LCRR_EADC 0x00030000 +#define LCRR_EADC_SHIFT 16 +#define LCRR_CLKDIV 0x0000000F +#define LCRR_CLKDIV_SHIFT 0 + u8 res7[0x8]; + __be32 fmr; /**< Flash Mode Register */ +#define FMR_CWTO 0x0000F000 +#define FMR_CWTO_SHIFT 12 +#define FMR_BOOT 0x00000800 +#define FMR_ECCM 0x00000100 +#define FMR_AL 0x00000030 +#define FMR_AL_SHIFT 4 +#define FMR_OP 0x00000003 +#define FMR_OP_SHIFT 0 + __be32 fir; /**< Flash Instruction Register */ +#define FIR_OP0 0xF0000000 +#define FIR_OP0_SHIFT 28 +#define FIR_OP1 0x0F000000 +#define FIR_OP1_SHIFT 24 +#define FIR_OP2 0x00F00000 +#define FIR_OP2_SHIFT 20 +#define FIR_OP3 0x000F0000 +#define FIR_OP3_SHIFT 16 +#define FIR_OP4 0x0000F000 +#define FIR_OP4_SHIFT 12 +#define FIR_OP5 0x00000F00 +#define FIR_OP5_SHIFT 8 +#define FIR_OP6 0x000000F0 +#define FIR_OP6_SHIFT 4 +#define FIR_OP7 0x0000000F +#define FIR_OP7_SHIFT 0 +#define FIR_OP_NOP 0x0 /* No operation and end of sequence */ +#define FIR_OP_CA 0x1 /* Issue current column address */ +#define FIR_OP_PA 0x2 /* Issue current block+page address */ +#define FIR_OP_UA 0x3 /* Issue user defined address */ +#define FIR_OP_CM0 0x4 /* Issue command from FCR[CMD0] */ +#define FIR_OP_CM1 0x5 /* Issue command from FCR[CMD1] */ +#define FIR_OP_CM2 0x6 /* Issue command from FCR[CMD2] */ +#define FIR_OP_CM3 0x7 /* Issue command from FCR[CMD3] */ +#define FIR_OP_WB 0x8 /* Write FBCR bytes from FCM buffer */ +#define FIR_OP_WS 0x9 /* Write 1 or 2 bytes from MDR[AS] */ +#define FIR_OP_RB 0xA /* Read FBCR bytes to FCM buffer */ +#define FIR_OP_RS 0xB /* Read 1 or 2 bytes to MDR[AS] */ +#define FIR_OP_CW0 0xC /* Wait then issue FCR[CMD0] */ +#define FIR_OP_CW1 0xD /* Wait then issue FCR[CMD1] */ +#define FIR_OP_RBW 0xE /* Wait then read FBCR bytes */ +#define FIR_OP_RSW 0xE /* Wait then read 1 or 2 bytes */ + __be32 fcr; /**< Flash Command Register */ +#define FCR_CMD0 0xFF000000 +#define FCR_CMD0_SHIFT 24 +#define FCR_CMD1 0x00FF0000 +#define FCR_CMD1_SHIFT 16 +#define FCR_CMD2 0x0000FF00 +#define FCR_CMD2_SHIFT 8 +#define FCR_CMD3 0x000000FF +#define FCR_CMD3_SHIFT 0 + __be32 fbar; /**< Flash Block Address Register */ +#define FBAR_BLK 0x00FFFFFF + __be32 fpar; /**< Flash Page Address Register */ +#define FPAR_SP_PI 0x00007C00 +#define FPAR_SP_PI_SHIFT 10 +#define FPAR_SP_MS 0x00000200 +#define FPAR_SP_CI 0x000001FF +#define FPAR_SP_CI_SHIFT 0 +#define FPAR_LP_PI 0x0003F000 +#define FPAR_LP_PI_SHIFT 12 +#define FPAR_LP_MS 0x00000800 +#define FPAR_LP_CI 0x000007FF +#define FPAR_LP_CI_SHIFT 0 + __be32 fbcr; /**< Flash Byte Count Register */ +#define FBCR_BC 0x00000FFF +}; + +/* + * FSL UPM routines + */ +struct fsl_upm { + __be32 __iomem *mxmr; + int width; +}; + +extern u32 fsl_lbc_addr(phys_addr_t addr_base); +extern int fsl_lbc_find(phys_addr_t addr_base); +extern int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm); + +/** + * fsl_upm_start_pattern - start UPM patterns execution + * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find + * @pat_offset: UPM pattern offset for the command to be executed + * + * This routine programmes UPM so the next memory access that hits an UPM + * will trigger pattern execution, starting at pat_offset. + */ +static inline void fsl_upm_start_pattern(struct fsl_upm *upm, u8 pat_offset) +{ + clrsetbits_be32(upm->mxmr, MxMR_MAD, MxMR_OP_RP | pat_offset); +} + +/** + * fsl_upm_end_pattern - end UPM patterns execution + * @upm: pointer to the fsl_upm structure obtained via fsl_upm_find + * + * This routine reverts UPM to normal operation mode. + */ +static inline void fsl_upm_end_pattern(struct fsl_upm *upm) +{ + clrbits32(upm->mxmr, MxMR_OP_RP); + + while (in_be32(upm->mxmr) & MxMR_OP_RP) + cpu_relax(); +} + +/* overview of the fsl lbc controller */ + +struct fsl_lbc_ctrl { + /* device info */ + struct device *dev; + struct fsl_lbc_regs __iomem *regs; + int irq[2]; + wait_queue_head_t irq_wait; + spinlock_t lock; + void *nand; + + /* status read from LTESR by irq handler */ + unsigned int irq_status; + +#ifdef CONFIG_SUSPEND + /* save regs when system go to deep-sleep */ + struct fsl_lbc_regs *saved_regs; +#endif +}; + +extern int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, + u32 mar); +extern struct fsl_lbc_ctrl *fsl_lbc_ctrl_dev; + +#endif /* __ASM_FSL_LBC_H */ diff --git a/arch/powerpc/include/asm/fsl_pamu_stash.h b/arch/powerpc/include/asm/fsl_pamu_stash.h new file mode 100644 index 000000000..30a31ad21 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_pamu_stash.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * + * Copyright (C) 2013 Freescale Semiconductor, Inc. + */ + +#ifndef __FSL_PAMU_STASH_H +#define __FSL_PAMU_STASH_H + +/* cache stash targets */ +enum pamu_stash_target { + PAMU_ATTR_CACHE_L1 = 1, + PAMU_ATTR_CACHE_L2, + PAMU_ATTR_CACHE_L3, +}; + +/* + * This attribute allows configuring stashig specific parameters + * in the PAMU hardware. + */ + +struct pamu_stash_attribute { + u32 cpu; /* cpu number */ + u32 cache; /* cache to stash to: L1,L2,L3 */ +}; + +#endif /* __FSL_PAMU_STASH_H */ diff --git a/arch/powerpc/include/asm/fsl_pm.h b/arch/powerpc/include/asm/fsl_pm.h new file mode 100644 index 000000000..61a4c9773 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_pm.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Support Power Management + * + * Copyright 2014-2015 Freescale Semiconductor Inc. + */ +#ifndef __PPC_FSL_PM_H +#define __PPC_FSL_PM_H + +#define E500_PM_PH10 1 +#define E500_PM_PH15 2 +#define E500_PM_PH20 3 +#define E500_PM_PH30 4 +#define E500_PM_DOZE E500_PM_PH10 +#define E500_PM_NAP E500_PM_PH15 + +#define PLAT_PM_SLEEP 20 +#define PLAT_PM_LPM20 30 + +#define FSL_PM_SLEEP (1 << 0) +#define FSL_PM_DEEP_SLEEP (1 << 1) + +struct fsl_pm_ops { + /* mask pending interrupts to the RCPM from MPIC */ + void (*irq_mask)(int cpu); + + /* unmask pending interrupts to the RCPM from MPIC */ + void (*irq_unmask)(int cpu); + void (*cpu_enter_state)(int cpu, int state); + void (*cpu_exit_state)(int cpu, int state); + void (*cpu_up_prepare)(int cpu); + void (*cpu_die)(int cpu); + int (*plat_enter_sleep)(void); + void (*freeze_time_base)(bool freeze); + + /* keep the power of IP blocks during sleep/deep sleep */ + void (*set_ip_power)(bool enable, u32 mask); + + /* get platform supported power management modes */ + unsigned int (*get_pm_modes)(void); +}; + +extern const struct fsl_pm_ops *qoriq_pm_ops; + +int __init fsl_rcpm_init(void); + +#endif /* __PPC_FSL_PM_H */ diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h new file mode 100644 index 000000000..e647dfcb3 --- /dev/null +++ b/arch/powerpc/include/asm/ftrace.h @@ -0,0 +1,133 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_FTRACE +#define _ASM_POWERPC_FTRACE + +#include <asm/types.h> + +#ifdef CONFIG_FUNCTION_TRACER +#define MCOUNT_ADDR ((unsigned long)(_mcount)) +#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ + +#define HAVE_FUNCTION_GRAPH_RET_ADDR_PTR + +#ifdef __ASSEMBLY__ + +/* Based off of objdump optput from glibc */ + +#define MCOUNT_SAVE_FRAME \ + stwu r1,-48(r1); \ + stw r3, 12(r1); \ + stw r4, 16(r1); \ + stw r5, 20(r1); \ + stw r6, 24(r1); \ + mflr r3; \ + lwz r4, 52(r1); \ + mfcr r5; \ + stw r7, 28(r1); \ + stw r8, 32(r1); \ + stw r9, 36(r1); \ + stw r10,40(r1); \ + stw r3, 44(r1); \ + stw r5, 8(r1) + +#define MCOUNT_RESTORE_FRAME \ + lwz r6, 8(r1); \ + lwz r0, 44(r1); \ + lwz r3, 12(r1); \ + mtctr r0; \ + lwz r4, 16(r1); \ + mtcr r6; \ + lwz r5, 20(r1); \ + lwz r6, 24(r1); \ + lwz r0, 52(r1); \ + lwz r7, 28(r1); \ + lwz r8, 32(r1); \ + mtlr r0; \ + lwz r9, 36(r1); \ + lwz r10,40(r1); \ + addi r1, r1, 48 + +#else /* !__ASSEMBLY__ */ +extern void _mcount(void); + +static inline unsigned long ftrace_call_adjust(unsigned long addr) +{ + /* reloction of mcount call site is the same as the address */ + return addr; +} + +struct dyn_arch_ftrace { + struct module *mod; +}; +#endif /* __ASSEMBLY__ */ + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS +#define ARCH_SUPPORTS_FTRACE_OPS 1 +#endif +#endif /* CONFIG_FUNCTION_TRACER */ + +#ifndef __ASSEMBLY__ +#ifdef CONFIG_FTRACE_SYSCALLS +/* + * Some syscall entry functions on powerpc start with "ppc_" (fork and clone, + * for instance) or ppc32_/ppc64_. We should also match the sys_ variant with + * those. + */ +#define ARCH_HAS_SYSCALL_MATCH_SYM_NAME +#ifdef PPC64_ELF_ABI_v1 +static inline bool arch_syscall_match_sym_name(const char *sym, const char *name) +{ + /* We need to skip past the initial dot, and the __se_sys alias */ + return !strcmp(sym + 1, name) || + (!strncmp(sym, ".__se_sys", 9) && !strcmp(sym + 6, name)) || + (!strncmp(sym, ".ppc_", 5) && !strcmp(sym + 5, name + 4)) || + (!strncmp(sym, ".ppc32_", 7) && !strcmp(sym + 7, name + 4)) || + (!strncmp(sym, ".ppc64_", 7) && !strcmp(sym + 7, name + 4)); +} +#else +static inline bool arch_syscall_match_sym_name(const char *sym, const char *name) +{ + return !strcmp(sym, name) || + (!strncmp(sym, "__se_sys", 8) && !strcmp(sym + 5, name)) || + (!strncmp(sym, "ppc_", 4) && !strcmp(sym + 4, name + 4)) || + (!strncmp(sym, "ppc32_", 6) && !strcmp(sym + 6, name + 4)) || + (!strncmp(sym, "ppc64_", 6) && !strcmp(sym + 6, name + 4)); +} +#endif /* PPC64_ELF_ABI_v1 */ +#endif /* CONFIG_FTRACE_SYSCALLS */ + +#if defined(CONFIG_PPC64) && defined(CONFIG_FUNCTION_TRACER) +#include <asm/paca.h> + +static inline void this_cpu_disable_ftrace(void) +{ + get_paca()->ftrace_enabled = 0; +} + +static inline void this_cpu_enable_ftrace(void) +{ + get_paca()->ftrace_enabled = 1; +} + +/* Disable ftrace on this CPU if possible (may not be implemented) */ +static inline void this_cpu_set_ftrace_enabled(u8 ftrace_enabled) +{ + get_paca()->ftrace_enabled = ftrace_enabled; +} + +static inline u8 this_cpu_get_ftrace_enabled(void) +{ + return get_paca()->ftrace_enabled; +} + +void ftrace_free_init_tramp(void); +#else /* CONFIG_PPC64 */ +static inline void this_cpu_disable_ftrace(void) { } +static inline void this_cpu_enable_ftrace(void) { } +static inline void this_cpu_set_ftrace_enabled(u8 ftrace_enabled) { } +static inline u8 this_cpu_get_ftrace_enabled(void) { return 1; } +static inline void ftrace_free_init_tramp(void) { } +#endif /* CONFIG_PPC64 */ +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_FTRACE */ diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h new file mode 100644 index 000000000..e93ee3202 --- /dev/null +++ b/arch/powerpc/include/asm/futex.h @@ -0,0 +1,103 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_FUTEX_H +#define _ASM_POWERPC_FUTEX_H + +#ifdef __KERNEL__ + +#include <linux/futex.h> +#include <linux/uaccess.h> +#include <asm/errno.h> +#include <asm/synch.h> + +#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ + __asm__ __volatile ( \ + PPC_ATOMIC_ENTRY_BARRIER \ +"1: lwarx %0,0,%2\n" \ + insn \ +"2: stwcx. %1,0,%2\n" \ + "bne- 1b\n" \ + PPC_ATOMIC_EXIT_BARRIER \ + "li %1,0\n" \ +"3: .section .fixup,\"ax\"\n" \ +"4: li %1,%3\n" \ + "b 3b\n" \ + ".previous\n" \ + EX_TABLE(1b, 4b) \ + EX_TABLE(2b, 4b) \ + : "=&r" (oldval), "=&r" (ret) \ + : "b" (uaddr), "i" (-EFAULT), "r" (oparg) \ + : "cr0", "memory") + +static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval, + u32 __user *uaddr) +{ + int oldval = 0, ret; + + if (!access_ok(uaddr, sizeof(u32))) + return -EFAULT; + allow_read_write_user(uaddr, uaddr, sizeof(*uaddr)); + + switch (op) { + case FUTEX_OP_SET: + __futex_atomic_op("mr %1,%4\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ADD: + __futex_atomic_op("add %1,%0,%4\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_OR: + __futex_atomic_op("or %1,%0,%4\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ANDN: + __futex_atomic_op("andc %1,%0,%4\n", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_XOR: + __futex_atomic_op("xor %1,%0,%4\n", ret, oldval, uaddr, oparg); + break; + default: + ret = -ENOSYS; + } + + *oval = oldval; + + prevent_read_write_user(uaddr, uaddr, sizeof(*uaddr)); + return ret; +} + +static inline int +futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, + u32 oldval, u32 newval) +{ + int ret = 0; + u32 prev; + + if (!access_ok(uaddr, sizeof(u32))) + return -EFAULT; + + allow_read_write_user(uaddr, uaddr, sizeof(*uaddr)); + + __asm__ __volatile__ ( + PPC_ATOMIC_ENTRY_BARRIER +"1: lwarx %1,0,%3 # futex_atomic_cmpxchg_inatomic\n\ + cmpw 0,%1,%4\n\ + bne- 3f\n" +"2: stwcx. %5,0,%3\n\ + bne- 1b\n" + PPC_ATOMIC_EXIT_BARRIER +"3: .section .fixup,\"ax\"\n\ +4: li %0,%6\n\ + b 3b\n\ + .previous\n" + EX_TABLE(1b, 4b) + EX_TABLE(2b, 4b) + : "+r" (ret), "=&r" (prev), "+m" (*uaddr) + : "r" (uaddr), "r" (oldval), "r" (newval), "i" (-EFAULT) + : "cc", "memory"); + + *uval = prev; + prevent_read_write_user(uaddr, uaddr, sizeof(*uaddr)); + + return ret; +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_FUTEX_H */ diff --git a/arch/powerpc/include/asm/grackle.h b/arch/powerpc/include/asm/grackle.h new file mode 100644 index 000000000..7376e3fa1 --- /dev/null +++ b/arch/powerpc/include/asm/grackle.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_GRACKLE_H +#define _ASM_POWERPC_GRACKLE_H +#ifdef __KERNEL__ +/* + * Functions for setting up and using a MPC106 northbridge + */ + +#include <asm/pci-bridge.h> + +extern void setup_grackle(struct pci_controller *hose); +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_GRACKLE_H */ diff --git a/arch/powerpc/include/asm/hardirq.h b/arch/powerpc/include/asm/hardirq.h new file mode 100644 index 000000000..f133b5930 --- /dev/null +++ b/arch/powerpc/include/asm/hardirq.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_HARDIRQ_H +#define _ASM_POWERPC_HARDIRQ_H + +#include <linux/threads.h> +#include <linux/irq.h> + +typedef struct { + unsigned int __softirq_pending; + unsigned int timer_irqs_event; + unsigned int broadcast_irqs_event; + unsigned int timer_irqs_others; + unsigned int pmu_irqs; + unsigned int mce_exceptions; + unsigned int spurious_irqs; + unsigned int sreset_irqs; +#ifdef CONFIG_PPC_WATCHDOG + unsigned int soft_nmi_irqs; +#endif +#ifdef CONFIG_PPC_DOORBELL + unsigned int doorbell_irqs; +#endif +} ____cacheline_aligned irq_cpustat_t; + +DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat); + +#define __ARCH_IRQ_STAT +#define __ARCH_IRQ_EXIT_IRQS_DISABLED + +static inline void ack_bad_irq(unsigned int irq) +{ + printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq); +} + +extern u64 arch_irq_stat_cpu(unsigned int cpu); +#define arch_irq_stat_cpu arch_irq_stat_cpu + +#endif /* _ASM_POWERPC_HARDIRQ_H */ diff --git a/arch/powerpc/include/asm/head-64.h b/arch/powerpc/include/asm/head-64.h new file mode 100644 index 000000000..4cb9efa2e --- /dev/null +++ b/arch/powerpc/include/asm/head-64.h @@ -0,0 +1,174 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_HEAD_64_H +#define _ASM_POWERPC_HEAD_64_H + +#include <asm/cache.h> + +#ifdef __ASSEMBLY__ +/* + * We can't do CPP stringification and concatination directly into the section + * name for some reason, so these macros can do it for us. + */ +.macro define_ftsec name + .section ".head.text.\name\()","ax",@progbits +.endm +.macro define_data_ftsec name + .section ".head.data.\name\()","a",@progbits +.endm +.macro use_ftsec name + .section ".head.text.\name\()" +.endm + +/* + * Fixed (location) sections are used by opening fixed sections and emitting + * fixed section entries into them before closing them. Multiple fixed sections + * can be open at any time. + * + * Each fixed section created in a .S file must have corresponding linkage + * directives including location, added to arch/powerpc/kernel/vmlinux.lds.S + * + * For each fixed section, code is generated into it in the order which it + * appears in the source. Fixed section entries can be placed at a fixed + * location within the section using _LOCATION postifx variants. These must + * be ordered according to their relative placements within the section. + * + * OPEN_FIXED_SECTION(section_name, start_address, end_address) + * FIXED_SECTION_ENTRY_BEGIN(section_name, label1) + * + * USE_FIXED_SECTION(section_name) + * label3: + * li r10,128 + * mv r11,r10 + + * FIXED_SECTION_ENTRY_BEGIN_LOCATION(section_name, label2, start_address, size) + * FIXED_SECTION_ENTRY_END_LOCATION(section_name, label2, start_address, size) + * CLOSE_FIXED_SECTION(section_name) + * + * ZERO_FIXED_SECTION can be used to emit zeroed data. + * + * Troubleshooting: + * - If the build dies with "Error: attempt to move .org backwards" at + * CLOSE_FIXED_SECTION() or elsewhere, there may be something + * unexpected being added there. Remove the '. = x_len' line, rebuild, and + * check what is pushing the section down. + * - If the build dies in linking, check arch/powerpc/tools/head_check.sh + * comments. + * - If the kernel crashes or hangs in very early boot, it could be linker + * stubs at the start of the main text. + */ + +#define OPEN_FIXED_SECTION(sname, start, end) \ + sname##_start = (start); \ + sname##_end = (end); \ + sname##_len = (end) - (start); \ + define_ftsec sname; \ + . = 0x0; \ +start_##sname: + +/* + * .linker_stub_catch section is used to catch linker stubs from being + * inserted in our .text section, above the start_text label (which breaks + * the ABS_ADDR calculation). See kernel/vmlinux.lds.S and tools/head_check.sh + * for more details. We would prefer to just keep a cacheline (0x80), but + * 0x100 seems to be how the linker aligns branch stub groups. + */ +#ifdef CONFIG_LD_HEAD_STUB_CATCH +#define OPEN_TEXT_SECTION(start) \ + .section ".linker_stub_catch","ax",@progbits; \ +linker_stub_catch: \ + . = 0x4; \ + text_start = (start) + 0x100; \ + .section ".text","ax",@progbits; \ + .balign 0x100; \ +start_text: +#else +#define OPEN_TEXT_SECTION(start) \ + text_start = (start); \ + .section ".text","ax",@progbits; \ + . = 0x0; \ +start_text: +#endif + +#define ZERO_FIXED_SECTION(sname, start, end) \ + sname##_start = (start); \ + sname##_end = (end); \ + sname##_len = (end) - (start); \ + define_data_ftsec sname; \ + . = 0x0; \ + . = sname##_len; + +#define USE_FIXED_SECTION(sname) \ + fs_label = start_##sname; \ + fs_start = sname##_start; \ + use_ftsec sname; + +#define USE_TEXT_SECTION() \ + fs_label = start_text; \ + fs_start = text_start; \ + .text + +#define CLOSE_FIXED_SECTION(sname) \ + USE_FIXED_SECTION(sname); \ + . = sname##_len; \ +end_##sname: + + +#define __FIXED_SECTION_ENTRY_BEGIN(sname, name, __align) \ + USE_FIXED_SECTION(sname); \ + .balign __align; \ + .global name; \ +name: + +#define FIXED_SECTION_ENTRY_BEGIN(sname, name) \ + __FIXED_SECTION_ENTRY_BEGIN(sname, name, IFETCH_ALIGN_BYTES) + +#define FIXED_SECTION_ENTRY_BEGIN_LOCATION(sname, name, start, size) \ + USE_FIXED_SECTION(sname); \ + name##_start = (start); \ + .if ((start) % (size) != 0); \ + .error "Fixed section exception vector misalignment"; \ + .endif; \ + .if ((size) != 0x20) && ((size) != 0x80) && ((size) != 0x100) && ((size) != 0x1000); \ + .error "Fixed section exception vector bad size"; \ + .endif; \ + .if (start) < sname##_start; \ + .error "Fixed section underflow"; \ + .abort; \ + .endif; \ + . = (start) - sname##_start; \ + .global name; \ +name: + +#define FIXED_SECTION_ENTRY_END_LOCATION(sname, name, start, size) \ + .if (start) + (size) > sname##_end; \ + .error "Fixed section overflow"; \ + .abort; \ + .endif; \ + .if (. - name > (start) + (size) - name##_start); \ + .error "Fixed entry overflow"; \ + .abort; \ + .endif; \ + . = ((start) + (size) - sname##_start); \ + + +/* + * These macros are used to change symbols in other fixed sections to be + * absolute or related to our current fixed section. + * + * - DEFINE_FIXED_SYMBOL / FIXED_SYMBOL_ABS_ADDR is used to find the + * absolute address of a symbol within a fixed section, from any section. + * + * - ABS_ADDR is used to find the absolute address of any symbol, from within + * a fixed section. + */ +#define DEFINE_FIXED_SYMBOL(label) \ + label##_absolute = (label - fs_label + fs_start) + +#define FIXED_SYMBOL_ABS_ADDR(label) \ + (label##_absolute) + +#define ABS_ADDR(label) (label - fs_label + fs_start) + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_HEAD_64_H */ diff --git a/arch/powerpc/include/asm/heathrow.h b/arch/powerpc/include/asm/heathrow.h new file mode 100644 index 000000000..8bc5b1687 --- /dev/null +++ b/arch/powerpc/include/asm/heathrow.h @@ -0,0 +1,68 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_HEATHROW_H +#define _ASM_POWERPC_HEATHROW_H +#ifdef __KERNEL__ +/* + * heathrow.h: definitions for using the "Heathrow" I/O controller chip. + * + * Grabbed from Open Firmware definitions on a PowerBook G3 Series + * + * Copyright (C) 1997 Paul Mackerras. + */ + +/* Front light color on Yikes/B&W G3. 32 bits */ +#define HEATHROW_FRONT_LIGHT 0x32 /* (set to 0 or 0xffffffff) */ + +/* Brightness/contrast (gossamer iMac ?). 8 bits */ +#define HEATHROW_BRIGHTNESS_CNTL 0x32 +#define HEATHROW_CONTRAST_CNTL 0x33 + +/* offset from ohare base for feature control register */ +#define HEATHROW_MBCR 0x34 /* Media bay control */ +#define HEATHROW_FCR 0x38 /* Feature control */ +#define HEATHROW_AUX_CNTL_REG 0x3c /* Aux control */ + +/* + * Bits in feature control register. + * Bits postfixed with a _N are in inverse logic + */ +#define HRW_SCC_TRANS_EN_N 0x00000001 /* Also controls modem power */ +#define HRW_BAY_POWER_N 0x00000002 +#define HRW_BAY_PCI_ENABLE 0x00000004 +#define HRW_BAY_IDE_ENABLE 0x00000008 +#define HRW_BAY_FLOPPY_ENABLE 0x00000010 +#define HRW_IDE0_ENABLE 0x00000020 +#define HRW_IDE0_RESET_N 0x00000040 +#define HRW_BAY_DEV_MASK 0x0000001c +#define HRW_BAY_RESET_N 0x00000080 +#define HRW_IOBUS_ENABLE 0x00000100 /* Internal IDE ? */ +#define HRW_SCC_ENABLE 0x00000200 +#define HRW_MESH_ENABLE 0x00000400 +#define HRW_SWIM_ENABLE 0x00000800 +#define HRW_SOUND_POWER_N 0x00001000 +#define HRW_SOUND_CLK_ENABLE 0x00002000 +#define HRW_SCCA_IO 0x00004000 +#define HRW_SCCB_IO 0x00008000 +#define HRW_PORT_OR_DESK_VIA_N 0x00010000 /* This one is 0 on PowerBook */ +#define HRW_PWM_MON_ID_N 0x00020000 /* ??? (0) */ +#define HRW_HOOK_MB_CNT_N 0x00040000 /* ??? (0) */ +#define HRW_SWIM_CLONE_FLOPPY 0x00080000 /* ??? (0) */ +#define HRW_AUD_RUN22 0x00100000 /* ??? (1) */ +#define HRW_SCSI_LINK_MODE 0x00200000 /* Read ??? (1) */ +#define HRW_ARB_BYPASS 0x00400000 /* Disable internal PCI arbitrer */ +#define HRW_IDE1_RESET_N 0x00800000 /* Media bay */ +#define HRW_SLOW_SCC_PCLK 0x01000000 /* ??? (0) */ +#define HRW_RESET_SCC 0x02000000 +#define HRW_MFDC_CELL_ENABLE 0x04000000 /* ??? (0) */ +#define HRW_USE_MFDC 0x08000000 /* ??? (0) */ +#define HRW_BMAC_IO_ENABLE 0x60000000 /* two bits, not documented in OF */ +#define HRW_BMAC_RESET 0x80000000 /* not documented in OF */ + +/* We OR those features at boot on desktop G3s */ +#define HRW_DEFAULTS (HRW_SCCA_IO | HRW_SCCB_IO | HRW_SCC_ENABLE) + +/* Looks like Heathrow has some sort of GPIOs as well... */ +#define HRW_GPIO_MODEM_RESET 0x6d + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_HEATHROW_H */ diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h new file mode 100644 index 000000000..104026f7d --- /dev/null +++ b/arch/powerpc/include/asm/highmem.h @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * highmem.h: virtual kernel memory mappings for high memory + * + * PowerPC version, stolen from the i386 version. + * + * Used in CONFIG_HIGHMEM systems for memory pages which + * are not addressable by direct kernel virtual addresses. + * + * Copyright (C) 1999 Gerhard Wichert, Siemens AG + * Gerhard.Wichert@pdb.siemens.de + * + * + * Redesigned the x86 32-bit VM architecture to deal with + * up to 16 Terrabyte physical memory. With current x86 CPUs + * we now support up to 64 Gigabytes physical RAM. + * + * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com> + */ + +#ifndef _ASM_HIGHMEM_H +#define _ASM_HIGHMEM_H + +#ifdef __KERNEL__ + +#include <linux/interrupt.h> +#include <asm/kmap_types.h> +#include <asm/cacheflush.h> +#include <asm/page.h> +#include <asm/fixmap.h> + +extern pte_t *kmap_pte; +extern pte_t *pkmap_page_table; + +/* + * Right now we initialize only a single pte table. It can be extended + * easily, subsequent pte tables have to be allocated in one physical + * chunk of RAM. + */ +/* + * We use one full pte table with 4K pages. And with 16K/64K/256K pages pte + * table covers enough memory (32MB/512MB/2GB resp.), so that both FIXMAP + * and PKMAP can be placed in a single pte table. We use 512 pages for PKMAP + * in case of 16K/64K/256K page sizes. + */ +#ifdef CONFIG_PPC_4K_PAGES +#define PKMAP_ORDER PTE_SHIFT +#else +#define PKMAP_ORDER 9 +#endif +#define LAST_PKMAP (1 << PKMAP_ORDER) +#ifndef CONFIG_PPC_4K_PAGES +#define PKMAP_BASE (FIXADDR_START - PAGE_SIZE*(LAST_PKMAP + 1)) +#else +#define PKMAP_BASE ((FIXADDR_START - PAGE_SIZE*(LAST_PKMAP + 1)) & PMD_MASK) +#endif +#define LAST_PKMAP_MASK (LAST_PKMAP-1) +#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT) +#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) + +#define flush_cache_kmaps() flush_cache_all() + +#endif /* __KERNEL__ */ + +#endif /* _ASM_HIGHMEM_H */ diff --git a/arch/powerpc/include/asm/hmi.h b/arch/powerpc/include/asm/hmi.h new file mode 100644 index 000000000..155748460 --- /dev/null +++ b/arch/powerpc/include/asm/hmi.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Hypervisor Maintenance Interrupt header file. + * + * Copyright 2015 IBM Corporation + * Author: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> + */ + +#ifndef __ASM_PPC64_HMI_H__ +#define __ASM_PPC64_HMI_H__ + +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE + +#define CORE_TB_RESYNC_REQ_BIT 63 +#define MAX_SUBCORE_PER_CORE 4 + +/* + * sibling_subcore_state structure is used to co-ordinate all threads + * during HMI to avoid TB corruption. This structure is allocated once + * per each core and shared by all threads on that core. + */ +struct sibling_subcore_state { + unsigned long flags; + u8 in_guest[MAX_SUBCORE_PER_CORE]; +}; + +extern void wait_for_subcore_guest_exit(void); +extern void wait_for_tb_resync(void); +#else +static inline void wait_for_subcore_guest_exit(void) { } +static inline void wait_for_tb_resync(void) { } +#endif + +struct pt_regs; +extern long hmi_handle_debugtrig(struct pt_regs *regs); + +#endif /* __ASM_PPC64_HMI_H__ */ diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h new file mode 100644 index 000000000..013165e62 --- /dev/null +++ b/arch/powerpc/include/asm/hugetlb.h @@ -0,0 +1,83 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_HUGETLB_H +#define _ASM_POWERPC_HUGETLB_H + +#ifdef CONFIG_HUGETLB_PAGE +#include <asm/page.h> + +#ifdef CONFIG_PPC_BOOK3S_64 +#include <asm/book3s/64/hugetlb.h> +#elif defined(CONFIG_PPC_FSL_BOOK3E) +#include <asm/nohash/hugetlb-book3e.h> +#elif defined(CONFIG_PPC_8xx) +#include <asm/nohash/32/hugetlb-8xx.h> +#endif /* CONFIG_PPC_BOOK3S_64 */ + +extern bool hugetlb_disabled; + +void hugetlbpage_init_default(void); + +void flush_dcache_icache_hugepage(struct page *page); + +int slice_is_hugepage_only_range(struct mm_struct *mm, unsigned long addr, + unsigned long len); + +static inline int is_hugepage_only_range(struct mm_struct *mm, + unsigned long addr, + unsigned long len) +{ + if (IS_ENABLED(CONFIG_PPC_MM_SLICES) && !radix_enabled()) + return slice_is_hugepage_only_range(mm, addr, len); + return 0; +} +#define is_hugepage_only_range is_hugepage_only_range + +#define __HAVE_ARCH_HUGETLB_FREE_PGD_RANGE +void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr, + unsigned long end, unsigned long floor, + unsigned long ceiling); + +#define __HAVE_ARCH_HUGE_PTEP_GET_AND_CLEAR +static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + return __pte(pte_update(mm, addr, ptep, ~0UL, 0, 1)); +} + +#define __HAVE_ARCH_HUGE_PTEP_CLEAR_FLUSH +static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep) +{ + huge_ptep_get_and_clear(vma->vm_mm, addr, ptep); + flush_hugetlb_page(vma, addr); +} + +#define __HAVE_ARCH_HUGE_PTEP_SET_ACCESS_FLAGS +int huge_ptep_set_access_flags(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep, + pte_t pte, int dirty); + +void gigantic_hugetlb_cma_reserve(void) __init; +#include <asm-generic/hugetlb.h> + +#else /* ! CONFIG_HUGETLB_PAGE */ +static inline void flush_hugetlb_page(struct vm_area_struct *vma, + unsigned long vmaddr) +{ +} + +#define hugepd_shift(x) 0 +static inline pte_t *hugepte_offset(hugepd_t hpd, unsigned long addr, + unsigned pdshift) +{ + return NULL; +} + + +static inline void __init gigantic_hugetlb_cma_reserve(void) +{ +} + +#endif /* CONFIG_HUGETLB_PAGE */ + +#endif /* _ASM_POWERPC_HUGETLB_H */ diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h new file mode 100644 index 000000000..00c8cda1c --- /dev/null +++ b/arch/powerpc/include/asm/hvcall.h @@ -0,0 +1,608 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_HVCALL_H +#define _ASM_POWERPC_HVCALL_H +#ifdef __KERNEL__ + +#define HVSC .long 0x44000022 + +#define H_SUCCESS 0 +#define H_BUSY 1 /* Hardware busy -- retry later */ +#define H_CLOSED 2 /* Resource closed */ +#define H_NOT_AVAILABLE 3 +#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */ +#define H_PARTIAL 5 +#define H_IN_PROGRESS 14 /* Kind of like busy */ +#define H_PAGE_REGISTERED 15 +#define H_PARTIAL_STORE 16 +#define H_PENDING 17 /* returned from H_POLL_PENDING */ +#define H_CONTINUE 18 /* Returned from H_Join on success */ +#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */ +#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \ + is a good time to retry */ +#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */ + +/* Internal value used in book3s_hv kvm support; not returned to guests */ +#define H_TOO_HARD 9999 + +#define H_HARDWARE -1 /* Hardware error */ +#define H_FUNCTION -2 /* Function not supported */ +#define H_PRIVILEGE -3 /* Caller not privileged */ +#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */ +#define H_BAD_MODE -5 /* Illegal msr value */ +#define H_PTEG_FULL -6 /* PTEG is full */ +#define H_NOT_FOUND -7 /* PTE was not found" */ +#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */ +#define H_NO_MEM -9 +#define H_AUTHORITY -10 +#define H_PERMISSION -11 +#define H_DROPPED -12 +#define H_SOURCE_PARM -13 +#define H_DEST_PARM -14 +#define H_REMOTE_PARM -15 +#define H_RESOURCE -16 +#define H_ADAPTER_PARM -17 +#define H_RH_PARM -18 +#define H_RCQ_PARM -19 +#define H_SCQ_PARM -20 +#define H_EQ_PARM -21 +#define H_RT_PARM -22 +#define H_ST_PARM -23 +#define H_SIGT_PARM -24 +#define H_TOKEN_PARM -25 +#define H_MLENGTH_PARM -27 +#define H_MEM_PARM -28 +#define H_MEM_ACCESS_PARM -29 +#define H_ATTR_PARM -30 +#define H_PORT_PARM -31 +#define H_MCG_PARM -32 +#define H_VL_PARM -33 +#define H_TSIZE_PARM -34 +#define H_TRACE_PARM -35 + +#define H_MASK_PARM -37 +#define H_MCG_FULL -38 +#define H_ALIAS_EXIST -39 +#define H_P_COUNTER -40 +#define H_TABLE_FULL -41 +#define H_ALT_TABLE -42 +#define H_MR_CONDITION -43 +#define H_NOT_ENOUGH_RESOURCES -44 +#define H_R_STATE -45 +#define H_RESCINDED -46 +#define H_P2 -55 +#define H_P3 -56 +#define H_P4 -57 +#define H_P5 -58 +#define H_P6 -59 +#define H_P7 -60 +#define H_P8 -61 +#define H_P9 -62 +#define H_TOO_BIG -64 +#define H_UNSUPPORTED -67 +#define H_OVERLAP -68 +#define H_INTERRUPT -69 +#define H_BAD_DATA -70 +#define H_NOT_ACTIVE -71 +#define H_SG_LIST -72 +#define H_OP_MODE -73 +#define H_COP_HW -74 +#define H_STATE -75 +#define H_UNSUPPORTED_FLAG_START -256 +#define H_UNSUPPORTED_FLAG_END -511 +#define H_MULTI_THREADS_ACTIVE -9005 +#define H_OUTSTANDING_COP_OPS -9006 + + +/* Long Busy is a condition that can be returned by the firmware + * when a call cannot be completed now, but the identical call + * should be retried later. This prevents calls blocking in the + * firmware for long periods of time. Annoyingly the firmware can return + * a range of return codes, hinting at how long we should wait before + * retrying. If you don't care for the hint, the macro below is a good + * way to check for the long_busy return codes + */ +#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \ + && (x <= H_LONG_BUSY_END_RANGE)) + +/* Flags */ +#define H_LARGE_PAGE (1UL<<(63-16)) +#define H_EXACT (1UL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */ +#define H_R_XLATE (1UL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */ +#define H_READ_4 (1UL<<(63-26)) /* Return 4 PTEs */ +#define H_PAGE_STATE_CHANGE (1UL<<(63-28)) +#define H_PAGE_UNUSED ((1UL<<(63-29)) | (1UL<<(63-30))) +#define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED) +#define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED | (1UL<<(63-31))) +#define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE +#define H_AVPN (1UL<<(63-32)) /* An avpn is provided as a sanity test */ +#define H_ANDCOND (1UL<<(63-33)) +#define H_LOCAL (1UL<<(63-35)) +#define H_ICACHE_INVALIDATE (1UL<<(63-40)) /* icbi, etc. (ignored for IO pages) */ +#define H_ICACHE_SYNCHRONIZE (1UL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */ +#define H_COALESCE_CAND (1UL<<(63-42)) /* page is a good candidate for coalescing */ +#define H_ZERO_PAGE (1UL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */ +#define H_COPY_PAGE (1UL<<(63-49)) +#define H_N (1UL<<(63-61)) +#define H_PP1 (1UL<<(63-62)) +#define H_PP2 (1UL<<(63-63)) + +/* Flags for H_REGISTER_VPA subfunction field */ +#define H_VPA_FUNC_SHIFT (63-18) /* Bit posn of subfunction code */ +#define H_VPA_FUNC_MASK 7UL +#define H_VPA_REG_VPA 1UL /* Register Virtual Processor Area */ +#define H_VPA_REG_DTL 2UL /* Register Dispatch Trace Log */ +#define H_VPA_REG_SLB 3UL /* Register SLB shadow buffer */ +#define H_VPA_DEREG_VPA 5UL /* Deregister Virtual Processor Area */ +#define H_VPA_DEREG_DTL 6UL /* Deregister Dispatch Trace Log */ +#define H_VPA_DEREG_SLB 7UL /* Deregister SLB shadow buffer */ + +/* VASI States */ +#define H_VASI_INVALID 0 +#define H_VASI_ENABLED 1 +#define H_VASI_ABORTED 2 +#define H_VASI_SUSPENDING 3 +#define H_VASI_SUSPENDED 4 +#define H_VASI_RESUMED 5 +#define H_VASI_COMPLETED 6 + +/* Each control block has to be on a 4K boundary */ +#define H_CB_ALIGNMENT 4096 + +/* pSeries hypervisor opcodes */ +#define H_REMOVE 0x04 +#define H_ENTER 0x08 +#define H_READ 0x0c +#define H_CLEAR_MOD 0x10 +#define H_CLEAR_REF 0x14 +#define H_PROTECT 0x18 +#define H_GET_TCE 0x1c +#define H_PUT_TCE 0x20 +#define H_SET_SPRG0 0x24 +#define H_SET_DABR 0x28 +#define H_PAGE_INIT 0x2c +#define H_SET_ASR 0x30 +#define H_ASR_ON 0x34 +#define H_ASR_OFF 0x38 +#define H_LOGICAL_CI_LOAD 0x3c +#define H_LOGICAL_CI_STORE 0x40 +#define H_LOGICAL_CACHE_LOAD 0x44 +#define H_LOGICAL_CACHE_STORE 0x48 +#define H_LOGICAL_ICBI 0x4c +#define H_LOGICAL_DCBF 0x50 +#define H_GET_TERM_CHAR 0x54 +#define H_PUT_TERM_CHAR 0x58 +#define H_REAL_TO_LOGICAL 0x5c +#define H_HYPERVISOR_DATA 0x60 +#define H_EOI 0x64 +#define H_CPPR 0x68 +#define H_IPI 0x6c +#define H_IPOLL 0x70 +#define H_XIRR 0x74 +#define H_PERFMON 0x7c +#define H_MIGRATE_DMA 0x78 +#define H_REGISTER_VPA 0xDC +#define H_CEDE 0xE0 +#define H_CONFER 0xE4 +#define H_PROD 0xE8 +#define H_GET_PPP 0xEC +#define H_SET_PPP 0xF0 +#define H_PURR 0xF4 +#define H_PIC 0xF8 +#define H_REG_CRQ 0xFC +#define H_FREE_CRQ 0x100 +#define H_VIO_SIGNAL 0x104 +#define H_SEND_CRQ 0x108 +#define H_COPY_RDMA 0x110 +#define H_REGISTER_LOGICAL_LAN 0x114 +#define H_FREE_LOGICAL_LAN 0x118 +#define H_ADD_LOGICAL_LAN_BUFFER 0x11C +#define H_SEND_LOGICAL_LAN 0x120 +#define H_BULK_REMOVE 0x124 +#define H_MULTICAST_CTRL 0x130 +#define H_SET_XDABR 0x134 +#define H_STUFF_TCE 0x138 +#define H_PUT_TCE_INDIRECT 0x13C +#define H_CHANGE_LOGICAL_LAN_MAC 0x14C +#define H_VTERM_PARTNER_INFO 0x150 +#define H_REGISTER_VTERM 0x154 +#define H_FREE_VTERM 0x158 +#define H_RESET_EVENTS 0x15C +#define H_ALLOC_RESOURCE 0x160 +#define H_FREE_RESOURCE 0x164 +#define H_MODIFY_QP 0x168 +#define H_QUERY_QP 0x16C +#define H_REREGISTER_PMR 0x170 +#define H_REGISTER_SMR 0x174 +#define H_QUERY_MR 0x178 +#define H_QUERY_MW 0x17C +#define H_QUERY_HCA 0x180 +#define H_QUERY_PORT 0x184 +#define H_MODIFY_PORT 0x188 +#define H_DEFINE_AQP1 0x18C +#define H_GET_TRACE_BUFFER 0x190 +#define H_DEFINE_AQP0 0x194 +#define H_RESIZE_MR 0x198 +#define H_ATTACH_MCQP 0x19C +#define H_DETACH_MCQP 0x1A0 +#define H_CREATE_RPT 0x1A4 +#define H_REMOVE_RPT 0x1A8 +#define H_REGISTER_RPAGES 0x1AC +#define H_DISABLE_AND_GET 0x1B0 +#define H_ERROR_DATA 0x1B4 +#define H_GET_HCA_INFO 0x1B8 +#define H_GET_PERF_COUNT 0x1BC +#define H_MANAGE_TRACE 0x1C0 +#define H_GET_CPU_CHARACTERISTICS 0x1C8 +#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4 +#define H_QUERY_INT_STATE 0x1E4 +#define H_POLL_PENDING 0x1D8 +#define H_ILLAN_ATTRIBUTES 0x244 +#define H_MODIFY_HEA_QP 0x250 +#define H_QUERY_HEA_QP 0x254 +#define H_QUERY_HEA 0x258 +#define H_QUERY_HEA_PORT 0x25C +#define H_MODIFY_HEA_PORT 0x260 +#define H_REG_BCMC 0x264 +#define H_DEREG_BCMC 0x268 +#define H_REGISTER_HEA_RPAGES 0x26C +#define H_DISABLE_AND_GET_HEA 0x270 +#define H_GET_HEA_INFO 0x274 +#define H_ALLOC_HEA_RESOURCE 0x278 +#define H_ADD_CONN 0x284 +#define H_DEL_CONN 0x288 +#define H_JOIN 0x298 +#define H_VASI_STATE 0x2A4 +#define H_VIOCTL 0x2A8 +#define H_ENABLE_CRQ 0x2B0 +#define H_GET_EM_PARMS 0x2B8 +#define H_SET_MPP 0x2D0 +#define H_GET_MPP 0x2D4 +#define H_REG_SUB_CRQ 0x2DC +#define H_HOME_NODE_ASSOCIATIVITY 0x2EC +#define H_FREE_SUB_CRQ 0x2E0 +#define H_SEND_SUB_CRQ 0x2E4 +#define H_SEND_SUB_CRQ_INDIRECT 0x2E8 +#define H_BEST_ENERGY 0x2F4 +#define H_XIRR_X 0x2FC +#define H_RANDOM 0x300 +#define H_COP 0x304 +#define H_GET_MPP_X 0x314 +#define H_SET_MODE 0x31C +#define H_BLOCK_REMOVE 0x328 +#define H_CLEAR_HPT 0x358 +#define H_REQUEST_VMC 0x360 +#define H_RESIZE_HPT_PREPARE 0x36C +#define H_RESIZE_HPT_COMMIT 0x370 +#define H_REGISTER_PROC_TBL 0x37C +#define H_SIGNAL_SYS_RESET 0x380 +#define H_INT_GET_SOURCE_INFO 0x3A8 +#define H_INT_SET_SOURCE_CONFIG 0x3AC +#define H_INT_GET_SOURCE_CONFIG 0x3B0 +#define H_INT_GET_QUEUE_INFO 0x3B4 +#define H_INT_SET_QUEUE_CONFIG 0x3B8 +#define H_INT_GET_QUEUE_CONFIG 0x3BC +#define H_INT_SET_OS_REPORTING_LINE 0x3C0 +#define H_INT_GET_OS_REPORTING_LINE 0x3C4 +#define H_INT_ESB 0x3C8 +#define H_INT_SYNC 0x3CC +#define H_INT_RESET 0x3D0 +#define H_SCM_READ_METADATA 0x3E4 +#define H_SCM_WRITE_METADATA 0x3E8 +#define H_SCM_BIND_MEM 0x3EC +#define H_SCM_UNBIND_MEM 0x3F0 +#define H_SCM_QUERY_BLOCK_MEM_BINDING 0x3F4 +#define H_SCM_QUERY_LOGICAL_MEM_BINDING 0x3F8 +#define H_SCM_UNBIND_ALL 0x3FC +#define H_SCM_HEALTH 0x400 +#define H_SCM_PERFORMANCE_STATS 0x418 +#define H_RPT_INVALIDATE 0x448 +#define MAX_HCALL_OPCODE H_RPT_INVALIDATE + +/* Scope args for H_SCM_UNBIND_ALL */ +#define H_UNBIND_SCOPE_ALL (0x1) +#define H_UNBIND_SCOPE_DRC (0x2) + +/* H_VIOCTL functions */ +#define H_GET_VIOA_DUMP_SIZE 0x01 +#define H_GET_VIOA_DUMP 0x02 +#define H_GET_ILLAN_NUM_VLAN_IDS 0x03 +#define H_GET_ILLAN_VLAN_ID_LIST 0x04 +#define H_GET_ILLAN_SWITCH_ID 0x05 +#define H_DISABLE_MIGRATION 0x06 +#define H_ENABLE_MIGRATION 0x07 +#define H_GET_PARTNER_INFO 0x08 +#define H_GET_PARTNER_WWPN_LIST 0x09 +#define H_DISABLE_ALL_VIO_INTS 0x0A +#define H_DISABLE_VIO_INTERRUPT 0x0B +#define H_ENABLE_VIO_INTERRUPT 0x0C +#define H_GET_SESSION_TOKEN 0x19 +#define H_SESSION_ERR_DETECTED 0x1A + + +/* Platform specific hcalls, used by KVM */ +#define H_RTAS 0xf000 + +/* "Platform specific hcalls", provided by PHYP */ +#define H_GET_24X7_CATALOG_PAGE 0xF078 +#define H_GET_24X7_DATA 0xF07C +#define H_GET_PERF_COUNTER_INFO 0xF080 + +/* Platform-specific hcalls used for nested HV KVM */ +#define H_SET_PARTITION_TABLE 0xF800 +#define H_ENTER_NESTED 0xF804 +#define H_TLB_INVALIDATE 0xF808 +#define H_COPY_TOFROM_GUEST 0xF80C + +/* Flags for H_SVM_PAGE_IN */ +#define H_PAGE_IN_SHARED 0x1 + +/* Platform-specific hcalls used by the Ultravisor */ +#define H_SVM_PAGE_IN 0xEF00 +#define H_SVM_PAGE_OUT 0xEF04 +#define H_SVM_INIT_START 0xEF08 +#define H_SVM_INIT_DONE 0xEF0C +#define H_SVM_INIT_ABORT 0xEF14 + +/* Values for 2nd argument to H_SET_MODE */ +#define H_SET_MODE_RESOURCE_SET_CIABR 1 +#define H_SET_MODE_RESOURCE_SET_DAWR0 2 +#define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE 3 +#define H_SET_MODE_RESOURCE_LE 4 +#define H_SET_MODE_RESOURCE_SET_DAWR1 5 + +/* Values for argument to H_SIGNAL_SYS_RESET */ +#define H_SIGNAL_SYS_RESET_ALL -1 +#define H_SIGNAL_SYS_RESET_ALL_OTHERS -2 +/* >= 0 values are CPU number */ + +/* H_GET_CPU_CHARACTERISTICS return values */ +#define H_CPU_CHAR_SPEC_BAR_ORI31 (1ull << 63) // IBM bit 0 +#define H_CPU_CHAR_BCCTRL_SERIALISED (1ull << 62) // IBM bit 1 +#define H_CPU_CHAR_L1D_FLUSH_ORI30 (1ull << 61) // IBM bit 2 +#define H_CPU_CHAR_L1D_FLUSH_TRIG2 (1ull << 60) // IBM bit 3 +#define H_CPU_CHAR_L1D_THREAD_PRIV (1ull << 59) // IBM bit 4 +#define H_CPU_CHAR_BRANCH_HINTS_HONORED (1ull << 58) // IBM bit 5 +#define H_CPU_CHAR_THREAD_RECONFIG_CTRL (1ull << 57) // IBM bit 6 +#define H_CPU_CHAR_COUNT_CACHE_DISABLED (1ull << 56) // IBM bit 7 +#define H_CPU_CHAR_BCCTR_FLUSH_ASSIST (1ull << 54) // IBM bit 9 +#define H_CPU_CHAR_BCCTR_LINK_FLUSH_ASSIST (1ull << 52) // IBM bit 11 + +#define H_CPU_BEHAV_FAVOUR_SECURITY (1ull << 63) // IBM bit 0 +#define H_CPU_BEHAV_L1D_FLUSH_PR (1ull << 62) // IBM bit 1 +#define H_CPU_BEHAV_BNDS_CHK_SPEC_BAR (1ull << 61) // IBM bit 2 +#define H_CPU_BEHAV_FLUSH_COUNT_CACHE (1ull << 58) // IBM bit 5 +#define H_CPU_BEHAV_FLUSH_LINK_STACK (1ull << 57) // IBM bit 6 +#define H_CPU_BEHAV_NO_L1D_FLUSH_ENTRY (1ull << 56) // IBM bit 7 +#define H_CPU_BEHAV_NO_L1D_FLUSH_UACCESS (1ull << 55) // IBM bit 8 + +/* Flag values used in H_REGISTER_PROC_TBL hcall */ +#define PROC_TABLE_OP_MASK 0x18 +#define PROC_TABLE_DEREG 0x10 +#define PROC_TABLE_NEW 0x18 +#define PROC_TABLE_TYPE_MASK 0x06 +#define PROC_TABLE_HPT_SLB 0x00 +#define PROC_TABLE_HPT_PT 0x02 +#define PROC_TABLE_RADIX 0x04 +#define PROC_TABLE_GTSE 0x01 + +/* + * Defines for + * H_RPT_INVALIDATE - Invalidate RPT translation lookaside information. + */ + +/* Type of translation to invalidate (type) */ +#define H_RPTI_TYPE_NESTED 0x0001 /* Invalidate nested guest partition-scope */ +#define H_RPTI_TYPE_TLB 0x0002 /* Invalidate TLB */ +#define H_RPTI_TYPE_PWC 0x0004 /* Invalidate Page Walk Cache */ +/* Invalidate Process Table Entries if H_RPTI_TYPE_NESTED is clear */ +#define H_RPTI_TYPE_PRT 0x0008 +/* Invalidate Partition Table Entries if H_RPTI_TYPE_NESTED is set */ +#define H_RPTI_TYPE_PAT 0x0008 +#define H_RPTI_TYPE_ALL (H_RPTI_TYPE_TLB | H_RPTI_TYPE_PWC | \ + H_RPTI_TYPE_PRT) +#define H_RPTI_TYPE_NESTED_ALL (H_RPTI_TYPE_TLB | H_RPTI_TYPE_PWC | \ + H_RPTI_TYPE_PAT) + +/* Invalidation targets (target) */ +#define H_RPTI_TARGET_CMMU 0x01 /* All virtual processors in the partition */ +#define H_RPTI_TARGET_CMMU_LOCAL 0x02 /* Current virtual processor */ +/* All nest/accelerator agents in use by the partition */ +#define H_RPTI_TARGET_NMMU 0x04 + +/* Page size mask (page sizes) */ +#define H_RPTI_PAGE_4K 0x01 +#define H_RPTI_PAGE_64K 0x02 +#define H_RPTI_PAGE_2M 0x04 +#define H_RPTI_PAGE_1G 0x08 +#define H_RPTI_PAGE_ALL (-1UL) + +#ifndef __ASSEMBLY__ +#include <linux/types.h> + +/** + * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments + * @opcode: The hypervisor call to make. + * + * This call supports up to 7 arguments and only returns the status of + * the hcall. Use this version where possible, its slightly faster than + * the other plpar_hcalls. + */ +long plpar_hcall_norets(unsigned long opcode, ...); + +/* Variant which does not do hcall tracing */ +long plpar_hcall_norets_notrace(unsigned long opcode, ...); + +/** + * plpar_hcall: - Make a pseries hypervisor call + * @opcode: The hypervisor call to make. + * @retbuf: Buffer to store up to 4 return arguments in. + * + * This call supports up to 6 arguments and 4 return arguments. Use + * PLPAR_HCALL_BUFSIZE to size the return argument buffer. + * + * Used for all but the craziest of phyp interfaces (see plpar_hcall9) + */ +#define PLPAR_HCALL_BUFSIZE 4 +long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...); + +/** + * plpar_hcall_raw: - Make a hypervisor call without calculating hcall stats + * @opcode: The hypervisor call to make. + * @retbuf: Buffer to store up to 4 return arguments in. + * + * This call supports up to 6 arguments and 4 return arguments. Use + * PLPAR_HCALL_BUFSIZE to size the return argument buffer. + * + * Used when phyp interface needs to be called in real mode. Similar to + * plpar_hcall, but plpar_hcall_raw works in real mode and does not + * calculate hypervisor call statistics. + */ +long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...); + +/** + * plpar_hcall9: - Make a pseries hypervisor call with up to 9 return arguments + * @opcode: The hypervisor call to make. + * @retbuf: Buffer to store up to 9 return arguments in. + * + * This call supports up to 9 arguments and 9 return arguments. Use + * PLPAR_HCALL9_BUFSIZE to size the return argument buffer. + */ +#define PLPAR_HCALL9_BUFSIZE 9 +long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...); +long plpar_hcall9_raw(unsigned long opcode, unsigned long *retbuf, ...); + +struct hvcall_mpp_data { + unsigned long entitled_mem; + unsigned long mapped_mem; + unsigned short group_num; + unsigned short pool_num; + unsigned char mem_weight; + unsigned char unallocated_mem_weight; + unsigned long unallocated_entitlement; /* value in bytes */ + unsigned long pool_size; + signed long loan_request; + unsigned long backing_mem; +}; + +int h_get_mpp(struct hvcall_mpp_data *); + +struct hvcall_mpp_x_data { + unsigned long coalesced_bytes; + unsigned long pool_coalesced_bytes; + unsigned long pool_purr_cycles; + unsigned long pool_spurr_cycles; + unsigned long reserved[3]; +}; + +int h_get_mpp_x(struct hvcall_mpp_x_data *mpp_x_data); + +static inline unsigned int get_longbusy_msecs(int longbusy_rc) +{ + switch (longbusy_rc) { + case H_LONG_BUSY_ORDER_1_MSEC: + return 1; + case H_LONG_BUSY_ORDER_10_MSEC: + return 10; + case H_LONG_BUSY_ORDER_100_MSEC: + return 100; + case H_LONG_BUSY_ORDER_1_SEC: + return 1000; + case H_LONG_BUSY_ORDER_10_SEC: + return 10000; + case H_LONG_BUSY_ORDER_100_SEC: + return 100000; + default: + return 1; + } +} + +struct h_cpu_char_result { + u64 character; + u64 behaviour; +}; + +/* Register state for entering a nested guest with H_ENTER_NESTED */ +struct hv_guest_state { + u64 version; /* version of this structure layout */ + u32 lpid; + u32 vcpu_token; + /* These registers are hypervisor privileged (at least for writing) */ + u64 lpcr; + u64 pcr; + u64 amor; + u64 dpdes; + u64 hfscr; + s64 tb_offset; + u64 dawr0; + u64 dawrx0; + u64 ciabr; + u64 hdec_expiry; + u64 purr; + u64 spurr; + u64 ic; + u64 vtb; + u64 hdar; + u64 hdsisr; + u64 heir; + u64 asdr; + /* These are OS privileged but need to be set late in guest entry */ + u64 srr0; + u64 srr1; + u64 sprg[4]; + u64 pidr; + u64 cfar; + u64 ppr; +}; + +/* Latest version of hv_guest_state structure */ +#define HV_GUEST_STATE_VERSION 1 + +/* + * From the document "H_GetPerformanceCounterInfo Interface" v1.07 + * + * H_GET_PERF_COUNTER_INFO argument + */ +struct hv_get_perf_counter_info_params { + __be32 counter_request; /* I */ + __be32 starting_index; /* IO */ + __be16 secondary_index; /* IO */ + __be16 returned_values; /* O */ + __be32 detail_rc; /* O, only needed when called via *_norets() */ + + /* + * O, size each of counter_value element in bytes, only set for version + * >= 0x3 + */ + __be16 cv_element_size; + + /* I, 0 (zero) for versions < 0x3 */ + __u8 counter_info_version_in; + + /* O, 0 (zero) if version < 0x3. Must be set to 0 when making hcall */ + __u8 counter_info_version_out; + __u8 reserved[0xC]; + __u8 counter_value[]; +} __packed; + +#define HGPCI_REQ_BUFFER_SIZE 4096 +#define HGPCI_MAX_DATA_BYTES \ + (HGPCI_REQ_BUFFER_SIZE - sizeof(struct hv_get_perf_counter_info_params)) + +struct hv_gpci_request_buffer { + struct hv_get_perf_counter_info_params params; + uint8_t bytes[HGPCI_MAX_DATA_BYTES]; +} __packed; + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_HVCALL_H */ diff --git a/arch/powerpc/include/asm/hvconsole.h b/arch/powerpc/include/asm/hvconsole.h new file mode 100644 index 000000000..999ed5ac9 --- /dev/null +++ b/arch/powerpc/include/asm/hvconsole.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * hvconsole.h + * Copyright (C) 2004 Ryan S Arnold, IBM Corporation + * + * LPAR console support. + */ + +#ifndef _PPC64_HVCONSOLE_H +#define _PPC64_HVCONSOLE_H +#ifdef __KERNEL__ + +/* + * PSeries firmware will only send/recv up to 16 bytes of character data per + * hcall. + */ +#define MAX_VIO_PUT_CHARS 16 +#define SIZE_VIO_GET_CHARS 16 + +/* + * Vio firmware always attempts to fetch MAX_VIO_GET_CHARS chars. The 'count' + * parm is included to conform to put_chars() function pointer template + */ +extern int hvc_get_chars(uint32_t vtermno, char *buf, int count); +extern int hvc_put_chars(uint32_t vtermno, const char *buf, int count); + +#endif /* __KERNEL__ */ +#endif /* _PPC64_HVCONSOLE_H */ diff --git a/arch/powerpc/include/asm/hvcserver.h b/arch/powerpc/include/asm/hvcserver.h new file mode 100644 index 000000000..2b20403e9 --- /dev/null +++ b/arch/powerpc/include/asm/hvcserver.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * hvcserver.h + * Copyright (C) 2004 Ryan S Arnold, IBM Corporation + * + * PPC64 virtual I/O console server support. + */ + +#ifndef _PPC64_HVCSERVER_H +#define _PPC64_HVCSERVER_H +#ifdef __KERNEL__ + +#include <linux/list.h> + +/* Converged Location Code length */ +#define HVCS_CLC_LENGTH 79 + +/** + * hvcs_partner_info - an element in a list of partner info + * @node: list_head denoting this partner_info struct's position in the list of + * partner info. + * @unit_address: The partner unit address of this entry. + * @partition_ID: The partner partition ID of this entry. + * @location_code: The converged location code of this entry + 1 char for the + * null-term. + * + * This structure outlines the format that partner info is presented to a caller + * of the hvcs partner info fetching functions. These are strung together into + * a list using linux kernel lists. + */ +struct hvcs_partner_info { + struct list_head node; + uint32_t unit_address; + uint32_t partition_ID; + char location_code[HVCS_CLC_LENGTH + 1]; /* CLC + 1 null-term char */ +}; + +extern int hvcs_free_partner_info(struct list_head *head); +extern int hvcs_get_partner_info(uint32_t unit_address, + struct list_head *head, unsigned long *pi_buff); +extern int hvcs_register_connection(uint32_t unit_address, + uint32_t p_partition_ID, uint32_t p_unit_address); +extern int hvcs_free_connection(uint32_t unit_address); + +#endif /* __KERNEL__ */ +#endif /* _PPC64_HVCSERVER_H */ diff --git a/arch/powerpc/include/asm/hvsi.h b/arch/powerpc/include/asm/hvsi.h new file mode 100644 index 000000000..464a7519e --- /dev/null +++ b/arch/powerpc/include/asm/hvsi.h @@ -0,0 +1,95 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _HVSI_H +#define _HVSI_H + +#define VS_DATA_PACKET_HEADER 0xff +#define VS_CONTROL_PACKET_HEADER 0xfe +#define VS_QUERY_PACKET_HEADER 0xfd +#define VS_QUERY_RESPONSE_PACKET_HEADER 0xfc + +/* control verbs */ +#define VSV_SET_MODEM_CTL 1 /* to service processor only */ +#define VSV_MODEM_CTL_UPDATE 2 /* from service processor only */ +#define VSV_CLOSE_PROTOCOL 3 + +/* query verbs */ +#define VSV_SEND_VERSION_NUMBER 1 +#define VSV_SEND_MODEM_CTL_STATUS 2 + +/* yes, these masks are not consecutive. */ +#define HVSI_TSDTR 0x01 +#define HVSI_TSCD 0x20 + +#define HVSI_MAX_OUTGOING_DATA 12 +#define HVSI_VERSION 1 + +struct hvsi_header { + uint8_t type; + uint8_t len; + __be16 seqno; +} __attribute__((packed)); + +struct hvsi_data { + struct hvsi_header hdr; + uint8_t data[HVSI_MAX_OUTGOING_DATA]; +} __attribute__((packed)); + +struct hvsi_control { + struct hvsi_header hdr; + __be16 verb; + /* optional depending on verb: */ + __be32 word; + __be32 mask; +} __attribute__((packed)); + +struct hvsi_query { + struct hvsi_header hdr; + __be16 verb; +} __attribute__((packed)); + +struct hvsi_query_response { + struct hvsi_header hdr; + __be16 verb; + __be16 query_seqno; + union { + uint8_t version; + __be32 mctrl_word; + } u; +} __attribute__((packed)); + +/* hvsi lib struct definitions */ +#define HVSI_INBUF_SIZE 255 +struct tty_struct; +struct hvsi_priv { + unsigned int inbuf_len; /* data in input buffer */ + unsigned char inbuf[HVSI_INBUF_SIZE]; + unsigned int inbuf_cur; /* Cursor in input buffer */ + unsigned int inbuf_pktlen; /* packet length from cursor */ + atomic_t seqno; /* packet sequence number */ + unsigned int opened:1; /* driver opened */ + unsigned int established:1; /* protocol established */ + unsigned int is_console:1; /* used as a kernel console device */ + unsigned int mctrl_update:1; /* modem control updated */ + unsigned short mctrl; /* modem control */ + struct tty_struct *tty; /* tty structure */ + int (*get_chars)(uint32_t termno, char *buf, int count); + int (*put_chars)(uint32_t termno, const char *buf, int count); + uint32_t termno; +}; + +/* hvsi lib functions */ +struct hvc_struct; +extern void hvsilib_init(struct hvsi_priv *pv, + int (*get_chars)(uint32_t termno, char *buf, int count), + int (*put_chars)(uint32_t termno, const char *buf, + int count), + int termno, int is_console); +extern int hvsilib_open(struct hvsi_priv *pv, struct hvc_struct *hp); +extern void hvsilib_close(struct hvsi_priv *pv, struct hvc_struct *hp); +extern int hvsilib_read_mctrl(struct hvsi_priv *pv); +extern int hvsilib_write_mctrl(struct hvsi_priv *pv, int dtr); +extern void hvsilib_establish(struct hvsi_priv *pv); +extern int hvsilib_get_chars(struct hvsi_priv *pv, char *buf, int count); +extern int hvsilib_put_chars(struct hvsi_priv *pv, const char *buf, int count); + +#endif /* _HVSI_H */ diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h new file mode 100644 index 000000000..abebfbee5 --- /dev/null +++ b/arch/powerpc/include/asm/hw_breakpoint.h @@ -0,0 +1,128 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * PowerPC BookIII S hardware breakpoint definitions + * + * Copyright 2010, IBM Corporation. + * Author: K.Prasad <prasad@linux.vnet.ibm.com> + */ + +#ifndef _PPC_BOOK3S_64_HW_BREAKPOINT_H +#define _PPC_BOOK3S_64_HW_BREAKPOINT_H + +#include <asm/cpu_has_feature.h> +#include <asm/inst.h> + +#ifdef __KERNEL__ +struct arch_hw_breakpoint { + unsigned long address; + u16 type; + u16 len; /* length of the target data symbol */ + u16 hw_len; /* length programmed in hw */ + u8 flags; +}; + +/* Note: Don't change the first 6 bits below as they are in the same order + * as the dabr and dabrx. + */ +#define HW_BRK_TYPE_READ 0x01 +#define HW_BRK_TYPE_WRITE 0x02 +#define HW_BRK_TYPE_TRANSLATE 0x04 +#define HW_BRK_TYPE_USER 0x08 +#define HW_BRK_TYPE_KERNEL 0x10 +#define HW_BRK_TYPE_HYP 0x20 +#define HW_BRK_TYPE_EXTRANEOUS_IRQ 0x80 + +/* bits that overlap with the bottom 3 bits of the dabr */ +#define HW_BRK_TYPE_RDWR (HW_BRK_TYPE_READ | HW_BRK_TYPE_WRITE) +#define HW_BRK_TYPE_DABR (HW_BRK_TYPE_RDWR | HW_BRK_TYPE_TRANSLATE) +#define HW_BRK_TYPE_PRIV_ALL (HW_BRK_TYPE_USER | HW_BRK_TYPE_KERNEL | \ + HW_BRK_TYPE_HYP) + +#define HW_BRK_FLAG_DISABLED 0x1 + +/* Minimum granularity */ +#ifdef CONFIG_PPC_8xx +#define HW_BREAKPOINT_SIZE 0x4 +#else +#define HW_BREAKPOINT_SIZE 0x8 +#endif +#define HW_BREAKPOINT_SIZE_QUADWORD 0x10 + +#define DABR_MAX_LEN 8 +#define DAWR_MAX_LEN 512 + +static inline int nr_wp_slots(void) +{ + return cpu_has_feature(CPU_FTR_DAWR1) ? 2 : 1; +} + +bool wp_check_constraints(struct pt_regs *regs, struct ppc_inst instr, + unsigned long ea, int type, int size, + struct arch_hw_breakpoint *info); + +void wp_get_instr_detail(struct pt_regs *regs, struct ppc_inst *instr, + int *type, int *size, unsigned long *ea); + +#ifdef CONFIG_HAVE_HW_BREAKPOINT +#include <linux/kdebug.h> +#include <asm/reg.h> +#include <asm/debug.h> + +struct perf_event_attr; +struct perf_event; +struct pmu; +struct perf_sample_data; +struct task_struct; + +extern int hw_breakpoint_slots(int type); +extern int arch_bp_generic_fields(int type, int *gen_bp_type); +extern int arch_check_bp_in_kernelspace(struct arch_hw_breakpoint *hw); +extern int hw_breakpoint_arch_parse(struct perf_event *bp, + const struct perf_event_attr *attr, + struct arch_hw_breakpoint *hw); +extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused, + unsigned long val, void *data); +int arch_install_hw_breakpoint(struct perf_event *bp); +void arch_uninstall_hw_breakpoint(struct perf_event *bp); +void hw_breakpoint_pmu_read(struct perf_event *bp); +extern void flush_ptrace_hw_breakpoint(struct task_struct *tsk); + +extern struct pmu perf_ops_bp; +extern void ptrace_triggered(struct perf_event *bp, + struct perf_sample_data *data, struct pt_regs *regs); +static inline void hw_breakpoint_disable(void) +{ + int i; + struct arch_hw_breakpoint null_brk = {0}; + + if (!ppc_breakpoint_available()) + return; + + for (i = 0; i < nr_wp_slots(); i++) + __set_breakpoint(i, &null_brk); +} +extern void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs); +int hw_breakpoint_handler(struct die_args *args); + +#else /* CONFIG_HAVE_HW_BREAKPOINT */ +static inline void hw_breakpoint_disable(void) { } +static inline void thread_change_pc(struct task_struct *tsk, + struct pt_regs *regs) { } + +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ + + +#ifdef CONFIG_PPC_DAWR +extern bool dawr_force_enable; +static inline bool dawr_enabled(void) +{ + return dawr_force_enable; +} +int set_dawr(int nr, struct arch_hw_breakpoint *brk); +#else +static inline bool dawr_enabled(void) { return false; } +static inline int set_dawr(int nr, struct arch_hw_breakpoint *brk) { return -1; } +#endif + +#endif /* __KERNEL__ */ +#endif /* _PPC_BOOK3S_64_HW_BREAKPOINT_H */ diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h new file mode 100644 index 000000000..0f2acbb96 --- /dev/null +++ b/arch/powerpc/include/asm/hw_irq.h @@ -0,0 +1,420 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> + */ +#ifndef _ASM_POWERPC_HW_IRQ_H +#define _ASM_POWERPC_HW_IRQ_H + +#ifdef __KERNEL__ + +#include <linux/errno.h> +#include <linux/compiler.h> +#include <asm/ptrace.h> +#include <asm/processor.h> + +#ifdef CONFIG_PPC64 + +/* + * PACA flags in paca->irq_happened. + * + * This bits are set when interrupts occur while soft-disabled + * and allow a proper replay. Additionally, PACA_IRQ_HARD_DIS + * is set whenever we manually hard disable. + */ +#define PACA_IRQ_HARD_DIS 0x01 +#define PACA_IRQ_DBELL 0x02 +#define PACA_IRQ_EE 0x04 +#define PACA_IRQ_DEC 0x08 /* Or FIT */ +#define PACA_IRQ_HMI 0x10 +#define PACA_IRQ_PMI 0x20 + +/* + * Some soft-masked interrupts must be hard masked until they are replayed + * (e.g., because the soft-masked handler does not clear the exception). + */ +#ifdef CONFIG_PPC_BOOK3S +#define PACA_IRQ_MUST_HARD_MASK (PACA_IRQ_EE|PACA_IRQ_PMI) +#else +#define PACA_IRQ_MUST_HARD_MASK (PACA_IRQ_EE) +#endif + +#endif /* CONFIG_PPC64 */ + +/* + * flags for paca->irq_soft_mask + */ +#define IRQS_ENABLED 0 +#define IRQS_DISABLED 1 /* local_irq_disable() interrupts */ +#define IRQS_PMI_DISABLED 2 +#define IRQS_ALL_DISABLED (IRQS_DISABLED | IRQS_PMI_DISABLED) + +#ifndef __ASSEMBLY__ + +extern void replay_system_reset(void); +extern void replay_soft_interrupts(void); + +extern void timer_interrupt(struct pt_regs *); +extern void timer_broadcast_interrupt(void); +extern void performance_monitor_exception(struct pt_regs *regs); +extern void WatchdogException(struct pt_regs *regs); +extern void unknown_exception(struct pt_regs *regs); + +#ifdef CONFIG_PPC64 +#include <asm/paca.h> + +static inline notrace unsigned long irq_soft_mask_return(void) +{ + unsigned long flags; + + asm volatile( + "lbz %0,%1(13)" + : "=r" (flags) + : "i" (offsetof(struct paca_struct, irq_soft_mask))); + + return flags; +} + +/* + * The "memory" clobber acts as both a compiler barrier + * for the critical section and as a clobber because + * we changed paca->irq_soft_mask + */ +static inline notrace void irq_soft_mask_set(unsigned long mask) +{ +#ifdef CONFIG_PPC_IRQ_SOFT_MASK_DEBUG + /* + * The irq mask must always include the STD bit if any are set. + * + * and interrupts don't get replayed until the standard + * interrupt (local_irq_disable()) is unmasked. + * + * Other masks must only provide additional masking beyond + * the standard, and they are also not replayed until the + * standard interrupt becomes unmasked. + * + * This could be changed, but it will require partial + * unmasks to be replayed, among other things. For now, take + * the simple approach. + */ + WARN_ON(mask && !(mask & IRQS_DISABLED)); +#endif + + asm volatile( + "stb %0,%1(13)" + : + : "r" (mask), + "i" (offsetof(struct paca_struct, irq_soft_mask)) + : "memory"); +} + +static inline notrace unsigned long irq_soft_mask_set_return(unsigned long mask) +{ + unsigned long flags; + +#ifdef CONFIG_PPC_IRQ_SOFT_MASK_DEBUG + WARN_ON(mask && !(mask & IRQS_DISABLED)); +#endif + + asm volatile( + "lbz %0,%1(13); stb %2,%1(13)" + : "=&r" (flags) + : "i" (offsetof(struct paca_struct, irq_soft_mask)), + "r" (mask) + : "memory"); + + return flags; +} + +static inline notrace unsigned long irq_soft_mask_or_return(unsigned long mask) +{ + unsigned long flags, tmp; + + asm volatile( + "lbz %0,%2(13); or %1,%0,%3; stb %1,%2(13)" + : "=&r" (flags), "=r" (tmp) + : "i" (offsetof(struct paca_struct, irq_soft_mask)), + "r" (mask) + : "memory"); + +#ifdef CONFIG_PPC_IRQ_SOFT_MASK_DEBUG + WARN_ON((mask | flags) && !((mask | flags) & IRQS_DISABLED)); +#endif + + return flags; +} + +static inline unsigned long arch_local_save_flags(void) +{ + return irq_soft_mask_return(); +} + +static inline void arch_local_irq_disable(void) +{ + irq_soft_mask_set(IRQS_DISABLED); +} + +extern void arch_local_irq_restore(unsigned long); + +static inline void arch_local_irq_enable(void) +{ + arch_local_irq_restore(IRQS_ENABLED); +} + +static inline unsigned long arch_local_irq_save(void) +{ + return irq_soft_mask_set_return(IRQS_DISABLED); +} + +static inline bool arch_irqs_disabled_flags(unsigned long flags) +{ + return flags & IRQS_DISABLED; +} + +static inline bool arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} + +static inline void set_pmi_irq_pending(void) +{ + /* + * Invoked from PMU callback functions to set PMI bit in the paca. + * This has to be called with irq's disabled (via hard_irq_disable()). + */ + if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) + WARN_ON_ONCE(mfmsr() & MSR_EE); + + get_paca()->irq_happened |= PACA_IRQ_PMI; +} + +static inline void clear_pmi_irq_pending(void) +{ + /* + * Invoked from PMU callback functions to clear the pending PMI bit + * in the paca. + */ + if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) + WARN_ON_ONCE(mfmsr() & MSR_EE); + + get_paca()->irq_happened &= ~PACA_IRQ_PMI; +} + +static inline bool pmi_irq_pending(void) +{ + /* + * Invoked from PMU callback functions to check if there is a pending + * PMI bit in the paca. + */ + if (get_paca()->irq_happened & PACA_IRQ_PMI) + return true; + + return false; +} + +#ifdef CONFIG_PPC_BOOK3S +/* + * To support disabling and enabling of irq with PMI, set of + * new powerpc_local_irq_pmu_save() and powerpc_local_irq_restore() + * functions are added. These macros are implemented using generic + * linux local_irq_* code from include/linux/irqflags.h. + */ +#define raw_local_irq_pmu_save(flags) \ + do { \ + typecheck(unsigned long, flags); \ + flags = irq_soft_mask_or_return(IRQS_DISABLED | \ + IRQS_PMI_DISABLED); \ + } while(0) + +#define raw_local_irq_pmu_restore(flags) \ + do { \ + typecheck(unsigned long, flags); \ + arch_local_irq_restore(flags); \ + } while(0) + +#ifdef CONFIG_TRACE_IRQFLAGS +#define powerpc_local_irq_pmu_save(flags) \ + do { \ + raw_local_irq_pmu_save(flags); \ + if (!raw_irqs_disabled_flags(flags)) \ + trace_hardirqs_off(); \ + } while(0) +#define powerpc_local_irq_pmu_restore(flags) \ + do { \ + if (!raw_irqs_disabled_flags(flags)) \ + trace_hardirqs_on(); \ + raw_local_irq_pmu_restore(flags); \ + } while(0) +#else +#define powerpc_local_irq_pmu_save(flags) \ + do { \ + raw_local_irq_pmu_save(flags); \ + } while(0) +#define powerpc_local_irq_pmu_restore(flags) \ + do { \ + raw_local_irq_pmu_restore(flags); \ + } while (0) +#endif /* CONFIG_TRACE_IRQFLAGS */ + +#endif /* CONFIG_PPC_BOOK3S */ + +#ifdef CONFIG_PPC_BOOK3E +#define __hard_irq_enable() wrtee(MSR_EE) +#define __hard_irq_disable() wrtee(0) +#define __hard_EE_RI_disable() wrtee(0) +#define __hard_RI_enable() do { } while (0) +#else +#define __hard_irq_enable() __mtmsrd(MSR_EE|MSR_RI, 1) +#define __hard_irq_disable() __mtmsrd(MSR_RI, 1) +#define __hard_EE_RI_disable() __mtmsrd(0, 1) +#define __hard_RI_enable() __mtmsrd(MSR_RI, 1) +#endif + +#define hard_irq_disable() do { \ + unsigned long flags; \ + __hard_irq_disable(); \ + flags = irq_soft_mask_set_return(IRQS_ALL_DISABLED); \ + local_paca->irq_happened |= PACA_IRQ_HARD_DIS; \ + if (!arch_irqs_disabled_flags(flags)) { \ + asm ("stdx %%r1, 0, %1 ;" \ + : "=m" (local_paca->saved_r1) \ + : "b" (&local_paca->saved_r1)); \ + trace_hardirqs_off(); \ + } \ +} while(0) + +static inline bool __lazy_irq_pending(u8 irq_happened) +{ + return !!(irq_happened & ~PACA_IRQ_HARD_DIS); +} + +/* + * Check if a lazy IRQ is pending. Should be called with IRQs hard disabled. + */ +static inline bool lazy_irq_pending(void) +{ + return __lazy_irq_pending(get_paca()->irq_happened); +} + +/* + * Check if a lazy IRQ is pending, with no debugging checks. + * Should be called with IRQs hard disabled. + * For use in RI disabled code or other constrained situations. + */ +static inline bool lazy_irq_pending_nocheck(void) +{ + return __lazy_irq_pending(local_paca->irq_happened); +} + +/* + * This is called by asynchronous interrupts to conditionally + * re-enable hard interrupts after having cleared the source + * of the interrupt. They are kept disabled if there is a different + * soft-masked interrupt pending that requires hard masking. + */ +static inline void may_hard_irq_enable(void) +{ + if (!(get_paca()->irq_happened & PACA_IRQ_MUST_HARD_MASK)) { + get_paca()->irq_happened &= ~PACA_IRQ_HARD_DIS; + __hard_irq_enable(); + } +} + +static inline bool arch_irq_disabled_regs(struct pt_regs *regs) +{ + return (regs->softe & IRQS_DISABLED); +} + +extern bool prep_irq_for_idle(void); +extern bool prep_irq_for_idle_irqsoff(void); +extern void irq_set_pending_from_srr1(unsigned long srr1); + +#define fini_irq_for_idle_irqsoff() trace_hardirqs_off(); + +extern void force_external_irq_replay(void); + +static inline void irq_soft_mask_regs_set_state(struct pt_regs *regs, unsigned long val) +{ + regs->softe = val; +} +#else /* CONFIG_PPC64 */ + +static inline unsigned long arch_local_save_flags(void) +{ + return mfmsr(); +} + +static inline void arch_local_irq_restore(unsigned long flags) +{ + if (IS_ENABLED(CONFIG_BOOKE)) + wrtee(flags); + else + mtmsr(flags); +} + +static inline unsigned long arch_local_irq_save(void) +{ + unsigned long flags = arch_local_save_flags(); + + if (IS_ENABLED(CONFIG_BOOKE)) + wrtee(0); + else if (IS_ENABLED(CONFIG_PPC_8xx)) + wrtspr(SPRN_EID); + else + mtmsr(flags & ~MSR_EE); + + return flags; +} + +static inline void arch_local_irq_disable(void) +{ + if (IS_ENABLED(CONFIG_BOOKE)) + wrtee(0); + else if (IS_ENABLED(CONFIG_PPC_8xx)) + wrtspr(SPRN_EID); + else + mtmsr(mfmsr() & ~MSR_EE); +} + +static inline void arch_local_irq_enable(void) +{ + if (IS_ENABLED(CONFIG_BOOKE)) + wrtee(MSR_EE); + else if (IS_ENABLED(CONFIG_PPC_8xx)) + wrtspr(SPRN_EIE); + else + mtmsr(mfmsr() | MSR_EE); +} + +static inline bool arch_irqs_disabled_flags(unsigned long flags) +{ + return (flags & MSR_EE) == 0; +} + +static inline bool arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} + +#define hard_irq_disable() arch_local_irq_disable() + +static inline bool arch_irq_disabled_regs(struct pt_regs *regs) +{ + return !(regs->msr & MSR_EE); +} + +static inline void may_hard_irq_enable(void) { } + +static inline void clear_pmi_irq_pending(void) { } +static inline void set_pmi_irq_pending(void) { } +static inline bool pmi_irq_pending(void) { return false; } + +static inline void irq_soft_mask_regs_set_state(struct pt_regs *regs, unsigned long val) +{ +} +#endif /* CONFIG_PPC64 */ + +#define ARCH_IRQ_INIT_FLAGS IRQ_NOREQUEST + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_HW_IRQ_H */ diff --git a/arch/powerpc/include/asm/hydra.h b/arch/powerpc/include/asm/hydra.h new file mode 100644 index 000000000..ae02eb53d --- /dev/null +++ b/arch/powerpc/include/asm/hydra.h @@ -0,0 +1,101 @@ +/* + * include/asm-ppc/hydra.h -- Mac I/O `Hydra' definitions + * + * Copyright (C) 1997 Geert Uytterhoeven + * + * This file is based on the following documentation: + * + * Macintosh Technology in the Common Hardware Reference Platform + * Apple Computer, Inc. + * + * © Copyright 1995 Apple Computer, Inc. All rights reserved. + * + * It's available online from https://www.cpu.lu/~mlan/ftp/MacTech.pdf + * You can obtain paper copies of this book from computer bookstores or by + * writing Morgan Kaufmann Publishers, Inc., 340 Pine Street, Sixth Floor, San + * Francisco, CA 94104. Reference ISBN 1-55860-393-X. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#ifndef _ASMPPC_HYDRA_H +#define _ASMPPC_HYDRA_H + +#ifdef __KERNEL__ + +struct Hydra { + /* DBDMA Controller Register Space */ + char Pad1[0x30]; + u_int CachePD; + u_int IDs; + u_int Feature_Control; + char Pad2[0x7fc4]; + /* DBDMA Channel Register Space */ + char SCSI_DMA[0x100]; + char Pad3[0x300]; + char SCCA_Tx_DMA[0x100]; + char SCCA_Rx_DMA[0x100]; + char SCCB_Tx_DMA[0x100]; + char SCCB_Rx_DMA[0x100]; + char Pad4[0x7800]; + /* Device Register Space */ + char SCSI[0x1000]; + char ADB[0x1000]; + char SCC_Legacy[0x1000]; + char SCC[0x1000]; + char Pad9[0x2000]; + char VIA[0x2000]; + char Pad10[0x28000]; + char OpenPIC[0x40000]; +}; + +extern volatile struct Hydra __iomem *Hydra; + + + /* + * Feature Control Register + */ + +#define HYDRA_FC_SCC_CELL_EN 0x00000001 /* Enable SCC Clock */ +#define HYDRA_FC_SCSI_CELL_EN 0x00000002 /* Enable SCSI Clock */ +#define HYDRA_FC_SCCA_ENABLE 0x00000004 /* Enable SCC A Lines */ +#define HYDRA_FC_SCCB_ENABLE 0x00000008 /* Enable SCC B Lines */ +#define HYDRA_FC_ARB_BYPASS 0x00000010 /* Bypass Internal Arbiter */ +#define HYDRA_FC_RESET_SCC 0x00000020 /* Reset SCC */ +#define HYDRA_FC_MPIC_ENABLE 0x00000040 /* Enable OpenPIC */ +#define HYDRA_FC_SLOW_SCC_PCLK 0x00000080 /* 1=15.6672, 0=25 MHz */ +#define HYDRA_FC_MPIC_IS_MASTER 0x00000100 /* OpenPIC Master Mode */ + + + /* + * OpenPIC Interrupt Sources + */ + +#define HYDRA_INT_SIO 0 +#define HYDRA_INT_SCSI_DMA 1 +#define HYDRA_INT_SCCA_TX_DMA 2 +#define HYDRA_INT_SCCA_RX_DMA 3 +#define HYDRA_INT_SCCB_TX_DMA 4 +#define HYDRA_INT_SCCB_RX_DMA 5 +#define HYDRA_INT_SCSI 6 +#define HYDRA_INT_SCCA 7 +#define HYDRA_INT_SCCB 8 +#define HYDRA_INT_VIA 9 +#define HYDRA_INT_ADB 10 +#define HYDRA_INT_ADB_NMI 11 +#define HYDRA_INT_EXT1 12 /* PCI IRQW */ +#define HYDRA_INT_EXT2 13 /* PCI IRQX */ +#define HYDRA_INT_EXT3 14 /* PCI IRQY */ +#define HYDRA_INT_EXT4 15 /* PCI IRQZ */ +#define HYDRA_INT_EXT5 16 /* IDE Primary/Secondary */ +#define HYDRA_INT_EXT6 17 /* IDE Secondary */ +#define HYDRA_INT_EXT7 18 /* Power Off Request */ +#define HYDRA_INT_SPARE 19 + +extern int hydra_init(void); + +#endif /* __KERNEL__ */ + +#endif /* _ASMPPC_HYDRA_H */ diff --git a/arch/powerpc/include/asm/i8259.h b/arch/powerpc/include/asm/i8259.h new file mode 100644 index 000000000..d7f08ae49 --- /dev/null +++ b/arch/powerpc/include/asm/i8259.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_I8259_H +#define _ASM_POWERPC_I8259_H +#ifdef __KERNEL__ + +#include <linux/irq.h> + +extern void i8259_init(struct device_node *node, unsigned long intack_addr); +extern unsigned int i8259_irq(void); +extern struct irq_domain *i8259_get_host(void); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_I8259_H */ diff --git a/arch/powerpc/include/asm/ibmebus.h b/arch/powerpc/include/asm/ibmebus.h new file mode 100644 index 000000000..088f95b2e --- /dev/null +++ b/arch/powerpc/include/asm/ibmebus.h @@ -0,0 +1,60 @@ +/* + * IBM PowerPC eBus Infrastructure Support. + * + * Copyright (c) 2005 IBM Corporation + * Joachim Fenkes <fenkes@de.ibm.com> + * Heiko J Schick <schickhj@de.ibm.com> + * + * All rights reserved. + * + * This source code is distributed under a dual license of GPL v2.0 and OpenIB + * BSD. + * + * OpenIB BSD License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ASM_EBUS_H +#define _ASM_EBUS_H +#ifdef __KERNEL__ + +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/mod_devicetable.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> + +extern struct bus_type ibmebus_bus_type; + +int ibmebus_register_driver(struct platform_driver *drv); +void ibmebus_unregister_driver(struct platform_driver *drv); + +int ibmebus_request_irq(u32 ist, irq_handler_t handler, + unsigned long irq_flags, const char *devname, + void *dev_id); +void ibmebus_free_irq(u32 ist, void *dev_id); + +#endif /* __KERNEL__ */ +#endif /* _ASM_IBMEBUS_H */ diff --git a/arch/powerpc/include/asm/icswx.h b/arch/powerpc/include/asm/icswx.h new file mode 100644 index 000000000..f6599ccb3 --- /dev/null +++ b/arch/powerpc/include/asm/icswx.h @@ -0,0 +1,204 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * ICSWX api + * + * Copyright (C) 2015 IBM Corp. + * + * This provides the Initiate Coprocessor Store Word Indexed (ICSWX) + * instruction. This instruction is used to communicate with PowerPC + * coprocessors. This also provides definitions of the structures used + * to communicate with the coprocessor. + * + * The RFC02130: Coprocessor Architecture document is the reference for + * everything in this file unless otherwise noted. + */ +#ifndef _ARCH_POWERPC_INCLUDE_ASM_ICSWX_H_ +#define _ARCH_POWERPC_INCLUDE_ASM_ICSWX_H_ + +#include <asm/ppc-opcode.h> /* for PPC_ICSWX */ + +/* Chapter 6.5.8 Coprocessor-Completion Block (CCB) */ + +#define CCB_VALUE (0x3fffffffffffffff) +#define CCB_ADDRESS (0xfffffffffffffff8) +#define CCB_CM (0x0000000000000007) +#define CCB_CM0 (0x0000000000000004) +#define CCB_CM12 (0x0000000000000003) + +#define CCB_CM0_ALL_COMPLETIONS (0x0) +#define CCB_CM0_LAST_IN_CHAIN (0x4) +#define CCB_CM12_STORE (0x0) +#define CCB_CM12_INTERRUPT (0x1) + +#define CCB_SIZE (0x10) +#define CCB_ALIGN CCB_SIZE + +struct coprocessor_completion_block { + __be64 value; + __be64 address; +} __packed __aligned(CCB_ALIGN); + + +/* Chapter 6.5.7 Coprocessor-Status Block (CSB) */ + +#define CSB_V (0x80) +#define CSB_F (0x04) +#define CSB_CH (0x03) +#define CSB_CE_INCOMPLETE (0x80) +#define CSB_CE_TERMINATION (0x40) +#define CSB_CE_TPBC (0x20) + +#define CSB_CC_SUCCESS (0) +#define CSB_CC_INVALID_ALIGN (1) +#define CSB_CC_OPERAND_OVERLAP (2) +#define CSB_CC_DATA_LENGTH (3) +#define CSB_CC_TRANSLATION (5) +#define CSB_CC_PROTECTION (6) +#define CSB_CC_RD_EXTERNAL (7) +#define CSB_CC_INVALID_OPERAND (8) +#define CSB_CC_PRIVILEGE (9) +#define CSB_CC_INTERNAL (10) +#define CSB_CC_WR_EXTERNAL (12) +#define CSB_CC_NOSPC (13) +#define CSB_CC_EXCESSIVE_DDE (14) +#define CSB_CC_WR_TRANSLATION (15) +#define CSB_CC_WR_PROTECTION (16) +#define CSB_CC_UNKNOWN_CODE (17) +#define CSB_CC_ABORT (18) +#define CSB_CC_EXCEED_BYTE_COUNT (19) /* P9 or later */ +#define CSB_CC_TRANSPORT (20) +#define CSB_CC_INVALID_CRB (21) /* P9 or later */ +#define CSB_CC_INVALID_DDE (30) /* P9 or later */ +#define CSB_CC_SEGMENTED_DDL (31) +#define CSB_CC_PROGRESS_POINT (32) +#define CSB_CC_DDE_OVERFLOW (33) +#define CSB_CC_SESSION (34) +#define CSB_CC_PROVISION (36) +#define CSB_CC_CHAIN (37) +#define CSB_CC_SEQUENCE (38) +#define CSB_CC_HW (39) +/* P9 DD2 NX Workbook 3.2 (Table 4-36): Address translation fault */ +#define CSB_CC_FAULT_ADDRESS (250) + +#define CSB_SIZE (0x10) +#define CSB_ALIGN CSB_SIZE + +struct coprocessor_status_block { + u8 flags; + u8 cs; + u8 cc; + u8 ce; + __be32 count; + __be64 address; +} __packed __aligned(CSB_ALIGN); + + +/* Chapter 6.5.10 Data-Descriptor List (DDL) + * each list contains one or more Data-Descriptor Entries (DDE) + */ + +#define DDE_P (0x8000) + +#define DDE_SIZE (0x10) +#define DDE_ALIGN DDE_SIZE + +struct data_descriptor_entry { + __be16 flags; + u8 count; + u8 index; + __be32 length; + __be64 address; +} __packed __aligned(DDE_ALIGN); + +/* 4.3.2 NX-stamped Fault CRB */ + +#define NX_STAMP_ALIGN (0x10) + +struct nx_fault_stamp { + __be64 fault_storage_addr; + __be16 reserved; + __u8 flags; + __u8 fault_status; + __be32 pswid; +} __packed __aligned(NX_STAMP_ALIGN); + +/* Chapter 6.5.2 Coprocessor-Request Block (CRB) */ + +#define CRB_SIZE (0x80) +#define CRB_ALIGN (0x100) /* Errata: requires 256 alignment */ + +/* Coprocessor Status Block field + * ADDRESS address of CSB + * C CCB is valid + * AT 0 = addrs are virtual, 1 = addrs are phys + * M enable perf monitor + */ +#define CRB_CSB_ADDRESS (0xfffffffffffffff0) +#define CRB_CSB_C (0x0000000000000008) +#define CRB_CSB_AT (0x0000000000000002) +#define CRB_CSB_M (0x0000000000000001) + +struct coprocessor_request_block { + __be32 ccw; + __be32 flags; + __be64 csb_addr; + + struct data_descriptor_entry source; + struct data_descriptor_entry target; + + struct coprocessor_completion_block ccb; + + union { + struct nx_fault_stamp nx; + u8 reserved[16]; + } stamp; + + u8 reserved[32]; + + struct coprocessor_status_block csb; +} __aligned(128); + +/* RFC02167 Initiate Coprocessor Instructions document + * Chapter 8.2.1.1.1 RS + * Chapter 8.2.3 Coprocessor Directive + * Chapter 8.2.4 Execution + * + * The CCW must be converted to BE before passing to icswx() + */ + +#define CCW_PS (0xff000000) +#define CCW_CT (0x00ff0000) +#define CCW_CD (0x0000ffff) +#define CCW_CL (0x0000c000) + + +/* RFC02167 Initiate Coprocessor Instructions document + * Chapter 8.2.1 Initiate Coprocessor Store Word Indexed (ICSWX) + * Chapter 8.2.4.1 Condition Register 0 + */ + +#define ICSWX_INITIATED (0x8) +#define ICSWX_BUSY (0x4) +#define ICSWX_REJECTED (0x2) +#define ICSWX_XERS0 (0x1) /* undefined or set from XERSO. */ + +static inline int icswx(__be32 ccw, struct coprocessor_request_block *crb) +{ + __be64 ccw_reg = ccw; + u32 cr; + + /* NB: the same structures are used by VAS-NX */ + BUILD_BUG_ON(sizeof(*crb) != 128); + + __asm__ __volatile__( + PPC_ICSWX(%1,0,%2) "\n" + "mfcr %0\n" + : "=r" (cr) + : "r" (ccw_reg), "r" (crb) + : "cr0", "memory"); + + return (int)((cr >> 28) & 0xf); +} + + +#endif /* _ARCH_POWERPC_INCLUDE_ASM_ICSWX_H_ */ diff --git a/arch/powerpc/include/asm/ide.h b/arch/powerpc/include/asm/ide.h new file mode 100644 index 000000000..ce87a4441 --- /dev/null +++ b/arch/powerpc/include/asm/ide.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 1994-1996 Linus Torvalds & authors + * + * This file contains the powerpc architecture specific IDE code. + */ +#ifndef _ASM_POWERPC_IDE_H +#define _ASM_POWERPC_IDE_H + +#include <linux/compiler.h> +#include <asm/io.h> + +#define __ide_mm_insw(p, a, c) readsw((void __iomem *)(p), (a), (c)) +#define __ide_mm_insl(p, a, c) readsl((void __iomem *)(p), (a), (c)) +#define __ide_mm_outsw(p, a, c) writesw((void __iomem *)(p), (a), (c)) +#define __ide_mm_outsl(p, a, c) writesl((void __iomem *)(p), (a), (c)) + +#endif /* _ASM_POWERPC_IDE_H */ diff --git a/arch/powerpc/include/asm/idle.h b/arch/powerpc/include/asm/idle.h new file mode 100644 index 000000000..accd1f500 --- /dev/null +++ b/arch/powerpc/include/asm/idle.h @@ -0,0 +1,93 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_IDLE_H +#define _ASM_POWERPC_IDLE_H +#include <asm/runlatch.h> +#include <asm/paca.h> + +#ifdef CONFIG_PPC_PSERIES +DECLARE_PER_CPU(u64, idle_spurr_cycles); +DECLARE_PER_CPU(u64, idle_entry_purr_snap); +DECLARE_PER_CPU(u64, idle_entry_spurr_snap); + +static inline void snapshot_purr_idle_entry(void) +{ + *this_cpu_ptr(&idle_entry_purr_snap) = mfspr(SPRN_PURR); +} + +static inline void snapshot_spurr_idle_entry(void) +{ + *this_cpu_ptr(&idle_entry_spurr_snap) = mfspr(SPRN_SPURR); +} + +static inline void update_idle_purr_accounting(void) +{ + u64 wait_cycles; + u64 in_purr = *this_cpu_ptr(&idle_entry_purr_snap); + + wait_cycles = be64_to_cpu(get_lppaca()->wait_state_cycles); + wait_cycles += mfspr(SPRN_PURR) - in_purr; + get_lppaca()->wait_state_cycles = cpu_to_be64(wait_cycles); +} + +static inline void update_idle_spurr_accounting(void) +{ + u64 *idle_spurr_cycles_ptr = this_cpu_ptr(&idle_spurr_cycles); + u64 in_spurr = *this_cpu_ptr(&idle_entry_spurr_snap); + + *idle_spurr_cycles_ptr += mfspr(SPRN_SPURR) - in_spurr; +} + +static inline void pseries_idle_prolog(void) +{ + ppc64_runlatch_off(); + snapshot_purr_idle_entry(); + snapshot_spurr_idle_entry(); + /* + * Indicate to the HV that we are idle. Now would be + * a good time to find other work to dispatch. + */ + get_lppaca()->idle = 1; +} + +static inline void pseries_idle_epilog(void) +{ + update_idle_purr_accounting(); + update_idle_spurr_accounting(); + get_lppaca()->idle = 0; + ppc64_runlatch_on(); +} + +static inline u64 read_this_idle_purr(void) +{ + /* + * If we are reading from an idle context, update the + * idle-purr cycles corresponding to the last idle period. + * Since the idle context is not yet over, take a fresh + * snapshot of the idle-purr. + */ + if (unlikely(get_lppaca()->idle == 1)) { + update_idle_purr_accounting(); + snapshot_purr_idle_entry(); + } + + return be64_to_cpu(get_lppaca()->wait_state_cycles); +} + +static inline u64 read_this_idle_spurr(void) +{ + /* + * If we are reading from an idle context, update the + * idle-spurr cycles corresponding to the last idle period. + * Since the idle context is not yet over, take a fresh + * snapshot of the idle-spurr. + */ + if (get_lppaca()->idle == 1) { + update_idle_spurr_accounting(); + snapshot_spurr_idle_entry(); + } + + return *this_cpu_ptr(&idle_spurr_cycles); +} + +#endif /* CONFIG_PPC_PSERIES */ +#endif diff --git a/arch/powerpc/include/asm/ima.h b/arch/powerpc/include/asm/ima.h new file mode 100644 index 000000000..ead488cf3 --- /dev/null +++ b/arch/powerpc/include/asm/ima.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_IMA_H +#define _ASM_POWERPC_IMA_H + +struct kimage; + +int ima_get_kexec_buffer(void **addr, size_t *size); +int ima_free_kexec_buffer(void); + +#ifdef CONFIG_IMA +void remove_ima_buffer(void *fdt, int chosen_node); +#else +static inline void remove_ima_buffer(void *fdt, int chosen_node) {} +#endif + +#ifdef CONFIG_IMA_KEXEC +int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr, + size_t size); + +int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node); +#else +static inline int setup_ima_buffer(const struct kimage *image, void *fdt, + int chosen_node) +{ + remove_ima_buffer(fdt, chosen_node); + return 0; +} +#endif /* CONFIG_IMA_KEXEC */ + +#endif /* _ASM_POWERPC_IMA_H */ diff --git a/arch/powerpc/include/asm/imc-pmu.h b/arch/powerpc/include/asm/imc-pmu.h new file mode 100644 index 000000000..699a88584 --- /dev/null +++ b/arch/powerpc/include/asm/imc-pmu.h @@ -0,0 +1,172 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef __ASM_POWERPC_IMC_PMU_H +#define __ASM_POWERPC_IMC_PMU_H + +/* + * IMC Nest Performance Monitor counter support. + * + * Copyright (C) 2017 Madhavan Srinivasan, IBM Corporation. + * (C) 2017 Anju T Sudhakar, IBM Corporation. + * (C) 2017 Hemant K Shaw, IBM Corporation. + */ + +#include <linux/perf_event.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/io.h> +#include <asm/opal.h> + +/* + * Compatibility macros for IMC devices + */ +#define IMC_DTB_COMPAT "ibm,opal-in-memory-counters" +#define IMC_DTB_UNIT_COMPAT "ibm,imc-counters" + + +/* + * LDBAR: Counter address and Enable/Disable macro. + * perf/imc-pmu.c has the LDBAR layout information. + */ +#define THREAD_IMC_LDBAR_MASK 0x0003ffffffffe000ULL +#define THREAD_IMC_ENABLE 0x8000000000000000ULL +#define TRACE_IMC_ENABLE 0x4000000000000000ULL + +/* + * For debugfs interface for imc-mode and imc-command + */ +#define IMC_CNTL_BLK_OFFSET 0x3FC00 +#define IMC_CNTL_BLK_CMD_OFFSET 8 +#define IMC_CNTL_BLK_MODE_OFFSET 32 + +/* + * Structure to hold memory address information for imc units. + */ +struct imc_mem_info { + u64 *vbase; + u32 id; +}; + +/* + * Place holder for nest pmu events and values. + */ +struct imc_events { + u32 value; + char *name; + char *unit; + char *scale; +}; + +/* + * Trace IMC hardware updates a 64bytes record on + * Core Performance Monitoring Counter (CPMC) + * overflow. Here is the layout for the trace imc record + * + * DW 0 : Timebase + * DW 1 : Program Counter + * DW 2 : PIDR information + * DW 3 : CPMC1 + * DW 4 : CPMC2 + * DW 5 : CPMC3 + * Dw 6 : CPMC4 + * DW 7 : Timebase + * ..... + * + * The following is the data structure to hold trace imc data. + */ +struct trace_imc_data { + u64 tb1; + u64 ip; + u64 val; + u64 cpmc1; + u64 cpmc2; + u64 cpmc3; + u64 cpmc4; + u64 tb2; +}; + +/* Event attribute array index */ +#define IMC_FORMAT_ATTR 0 +#define IMC_EVENT_ATTR 1 +#define IMC_CPUMASK_ATTR 2 +#define IMC_NULL_ATTR 3 + +/* PMU Format attribute macros */ +#define IMC_EVENT_OFFSET_MASK 0xffffffffULL + +/* + * Macro to mask bits 0:21 of first double word(which is the timebase) to + * compare with 8th double word (timebase) of trace imc record data. + */ +#define IMC_TRACE_RECORD_TB1_MASK 0x3ffffffffffULL + +/* + * Bit 0:1 in third DW of IMC trace record + * specifies the MSR[HV PR] values. + */ +#define IMC_TRACE_RECORD_VAL_HVPR(x) ((x) >> 62) + +/* + * Device tree parser code detects IMC pmu support and + * registers new IMC pmus. This structure will hold the + * pmu functions, events, counter memory information + * and attrs for each imc pmu and will be referenced at + * the time of pmu registration. + */ +struct imc_pmu { + struct pmu pmu; + struct imc_mem_info *mem_info; + struct imc_events *events; + /* + * Attribute groups for the PMU. Slot 0 used for + * format attribute, slot 1 used for cpusmask attribute, + * slot 2 used for event attribute. Slot 3 keep as + * NULL. + */ + const struct attribute_group *attr_groups[4]; + u32 counter_mem_size; + int domain; + /* + * flag to notify whether the memory is mmaped + * or allocated by kernel. + */ + bool imc_counter_mmaped; +}; + +/* + * Structure to hold id, lock and reference count for the imc events which + * are inited. + */ +struct imc_pmu_ref { + spinlock_t lock; + unsigned int id; + int refc; +}; + +/* + * In-Memory Collection Counters type. + * Data comes from Device tree. + * Three device type are supported. + */ + +enum { + IMC_TYPE_THREAD = 0x1, + IMC_TYPE_TRACE = 0x2, + IMC_TYPE_CORE = 0x4, + IMC_TYPE_CHIP = 0x10, +}; + +/* + * Domains for IMC PMUs + */ +#define IMC_DOMAIN_NEST 1 +#define IMC_DOMAIN_CORE 2 +#define IMC_DOMAIN_THREAD 3 +/* For trace-imc the domain is still thread but it operates in trace-mode */ +#define IMC_DOMAIN_TRACE 4 + +extern int init_imc_pmu(struct device_node *parent, + struct imc_pmu *pmu_ptr, int pmu_id); +extern void thread_imc_disable(void); +extern int get_max_nest_dev(void); +extern void unregister_thread_imc(void); +#endif /* __ASM_POWERPC_IMC_PMU_H */ diff --git a/arch/powerpc/include/asm/immap_cpm2.h b/arch/powerpc/include/asm/immap_cpm2.h new file mode 100644 index 000000000..845d5b3fb --- /dev/null +++ b/arch/powerpc/include/asm/immap_cpm2.h @@ -0,0 +1,648 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * CPM2 Internal Memory Map + * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) + * + * The Internal Memory Map for devices with CPM2 on them. This + * is the superset of all CPM2 devices (8260, 8266, 8280, 8272, + * 8560). + */ +#ifdef __KERNEL__ +#ifndef __IMMAP_CPM2__ +#define __IMMAP_CPM2__ + +#include <linux/types.h> + +/* System configuration registers. +*/ +typedef struct sys_82xx_conf { + u32 sc_siumcr; + u32 sc_sypcr; + u8 res1[6]; + u16 sc_swsr; + u8 res2[20]; + u32 sc_bcr; + u8 sc_ppc_acr; + u8 res3[3]; + u32 sc_ppc_alrh; + u32 sc_ppc_alrl; + u8 sc_lcl_acr; + u8 res4[3]; + u32 sc_lcl_alrh; + u32 sc_lcl_alrl; + u32 sc_tescr1; + u32 sc_tescr2; + u32 sc_ltescr1; + u32 sc_ltescr2; + u32 sc_pdtea; + u8 sc_pdtem; + u8 res5[3]; + u32 sc_ldtea; + u8 sc_ldtem; + u8 res6[163]; +} sysconf_82xx_cpm2_t; + +typedef struct sys_85xx_conf { + u32 sc_cear; + u16 sc_ceer; + u16 sc_cemr; + u8 res1[70]; + u32 sc_smaer; + u8 res2[4]; + u32 sc_smevr; + u32 sc_smctr; + u32 sc_lmaer; + u8 res3[4]; + u32 sc_lmevr; + u32 sc_lmctr; + u8 res4[144]; +} sysconf_85xx_cpm2_t; + +typedef union sys_conf { + sysconf_82xx_cpm2_t siu_82xx; + sysconf_85xx_cpm2_t siu_85xx; +} sysconf_cpm2_t; + + + +/* Memory controller registers. +*/ +typedef struct mem_ctlr { + u32 memc_br0; + u32 memc_or0; + u32 memc_br1; + u32 memc_or1; + u32 memc_br2; + u32 memc_or2; + u32 memc_br3; + u32 memc_or3; + u32 memc_br4; + u32 memc_or4; + u32 memc_br5; + u32 memc_or5; + u32 memc_br6; + u32 memc_or6; + u32 memc_br7; + u32 memc_or7; + u32 memc_br8; + u32 memc_or8; + u32 memc_br9; + u32 memc_or9; + u32 memc_br10; + u32 memc_or10; + u32 memc_br11; + u32 memc_or11; + u8 res1[8]; + u32 memc_mar; + u8 res2[4]; + u32 memc_mamr; + u32 memc_mbmr; + u32 memc_mcmr; + u8 res3[8]; + u16 memc_mptpr; + u8 res4[2]; + u32 memc_mdr; + u8 res5[4]; + u32 memc_psdmr; + u32 memc_lsdmr; + u8 memc_purt; + u8 res6[3]; + u8 memc_psrt; + u8 res7[3]; + u8 memc_lurt; + u8 res8[3]; + u8 memc_lsrt; + u8 res9[3]; + u32 memc_immr; + u32 memc_pcibr0; + u32 memc_pcibr1; + u8 res10[16]; + u32 memc_pcimsk0; + u32 memc_pcimsk1; + u8 res11[52]; +} memctl_cpm2_t; + +/* System Integration Timers. +*/ +typedef struct sys_int_timers { + u8 res1[32]; + u16 sit_tmcntsc; + u8 res2[2]; + u32 sit_tmcnt; + u8 res3[4]; + u32 sit_tmcntal; + u8 res4[16]; + u16 sit_piscr; + u8 res5[2]; + u32 sit_pitc; + u32 sit_pitr; + u8 res6[94]; + u8 res7[390]; +} sit_cpm2_t; + +#define PISCR_PIRQ_MASK ((u16)0xff00) +#define PISCR_PS ((u16)0x0080) +#define PISCR_PIE ((u16)0x0004) +#define PISCR_PTF ((u16)0x0002) +#define PISCR_PTE ((u16)0x0001) + +/* PCI Controller. +*/ +typedef struct pci_ctlr { + u32 pci_omisr; + u32 pci_omimr; + u8 res1[8]; + u32 pci_ifqpr; + u32 pci_ofqpr; + u8 res2[8]; + u32 pci_imr0; + u32 pci_imr1; + u32 pci_omr0; + u32 pci_omr1; + u32 pci_odr; + u8 res3[4]; + u32 pci_idr; + u8 res4[20]; + u32 pci_imisr; + u32 pci_imimr; + u8 res5[24]; + u32 pci_ifhpr; + u8 res6[4]; + u32 pci_iftpr; + u8 res7[4]; + u32 pci_iphpr; + u8 res8[4]; + u32 pci_iptpr; + u8 res9[4]; + u32 pci_ofhpr; + u8 res10[4]; + u32 pci_oftpr; + u8 res11[4]; + u32 pci_ophpr; + u8 res12[4]; + u32 pci_optpr; + u8 res13[8]; + u32 pci_mucr; + u8 res14[8]; + u32 pci_qbar; + u8 res15[12]; + u32 pci_dmamr0; + u32 pci_dmasr0; + u32 pci_dmacdar0; + u8 res16[4]; + u32 pci_dmasar0; + u8 res17[4]; + u32 pci_dmadar0; + u8 res18[4]; + u32 pci_dmabcr0; + u32 pci_dmandar0; + u8 res19[86]; + u32 pci_dmamr1; + u32 pci_dmasr1; + u32 pci_dmacdar1; + u8 res20[4]; + u32 pci_dmasar1; + u8 res21[4]; + u32 pci_dmadar1; + u8 res22[4]; + u32 pci_dmabcr1; + u32 pci_dmandar1; + u8 res23[88]; + u32 pci_dmamr2; + u32 pci_dmasr2; + u32 pci_dmacdar2; + u8 res24[4]; + u32 pci_dmasar2; + u8 res25[4]; + u32 pci_dmadar2; + u8 res26[4]; + u32 pci_dmabcr2; + u32 pci_dmandar2; + u8 res27[88]; + u32 pci_dmamr3; + u32 pci_dmasr3; + u32 pci_dmacdar3; + u8 res28[4]; + u32 pci_dmasar3; + u8 res29[4]; + u32 pci_dmadar3; + u8 res30[4]; + u32 pci_dmabcr3; + u32 pci_dmandar3; + u8 res31[344]; + u32 pci_potar0; + u8 res32[4]; + u32 pci_pobar0; + u8 res33[4]; + u32 pci_pocmr0; + u8 res34[4]; + u32 pci_potar1; + u8 res35[4]; + u32 pci_pobar1; + u8 res36[4]; + u32 pci_pocmr1; + u8 res37[4]; + u32 pci_potar2; + u8 res38[4]; + u32 pci_pobar2; + u8 res39[4]; + u32 pci_pocmr2; + u8 res40[50]; + u32 pci_ptcr; + u32 pci_gpcr; + u32 pci_gcr; + u32 pci_esr; + u32 pci_emr; + u32 pci_ecr; + u32 pci_eacr; + u8 res41[4]; + u32 pci_edcr; + u8 res42[4]; + u32 pci_eccr; + u8 res43[44]; + u32 pci_pitar1; + u8 res44[4]; + u32 pci_pibar1; + u8 res45[4]; + u32 pci_picmr1; + u8 res46[4]; + u32 pci_pitar0; + u8 res47[4]; + u32 pci_pibar0; + u8 res48[4]; + u32 pci_picmr0; + u8 res49[4]; + u32 pci_cfg_addr; + u32 pci_cfg_data; + u32 pci_int_ack; + u8 res50[756]; +} pci_cpm2_t; + +/* Interrupt Controller. +*/ +typedef struct interrupt_controller { + u16 ic_sicr; + u8 res1[2]; + u32 ic_sivec; + u32 ic_sipnrh; + u32 ic_sipnrl; + u32 ic_siprr; + u32 ic_scprrh; + u32 ic_scprrl; + u32 ic_simrh; + u32 ic_simrl; + u32 ic_siexr; + u8 res2[88]; +} intctl_cpm2_t; + +/* Clocks and Reset. +*/ +typedef struct clk_and_reset { + u32 car_sccr; + u8 res1[4]; + u32 car_scmr; + u8 res2[4]; + u32 car_rsr; + u32 car_rmr; + u8 res[104]; +} car_cpm2_t; + +/* Input/Output Port control/status registers. + * Names consistent with processor manual, although they are different + * from the original 8xx names....... + */ +typedef struct io_port { + u32 iop_pdira; + u32 iop_ppara; + u32 iop_psora; + u32 iop_podra; + u32 iop_pdata; + u8 res1[12]; + u32 iop_pdirb; + u32 iop_pparb; + u32 iop_psorb; + u32 iop_podrb; + u32 iop_pdatb; + u8 res2[12]; + u32 iop_pdirc; + u32 iop_pparc; + u32 iop_psorc; + u32 iop_podrc; + u32 iop_pdatc; + u8 res3[12]; + u32 iop_pdird; + u32 iop_ppard; + u32 iop_psord; + u32 iop_podrd; + u32 iop_pdatd; + u8 res4[12]; +} iop_cpm2_t; + +/* Communication Processor Module Timers +*/ +typedef struct cpm_timers { + u8 cpmt_tgcr1; + u8 res1[3]; + u8 cpmt_tgcr2; + u8 res2[11]; + u16 cpmt_tmr1; + u16 cpmt_tmr2; + u16 cpmt_trr1; + u16 cpmt_trr2; + u16 cpmt_tcr1; + u16 cpmt_tcr2; + u16 cpmt_tcn1; + u16 cpmt_tcn2; + u16 cpmt_tmr3; + u16 cpmt_tmr4; + u16 cpmt_trr3; + u16 cpmt_trr4; + u16 cpmt_tcr3; + u16 cpmt_tcr4; + u16 cpmt_tcn3; + u16 cpmt_tcn4; + u16 cpmt_ter1; + u16 cpmt_ter2; + u16 cpmt_ter3; + u16 cpmt_ter4; + u8 res3[584]; +} cpmtimer_cpm2_t; + +/* DMA control/status registers. +*/ +typedef struct sdma_csr { + u8 res0[24]; + u8 sdma_sdsr; + u8 res1[3]; + u8 sdma_sdmr; + u8 res2[3]; + u8 sdma_idsr1; + u8 res3[3]; + u8 sdma_idmr1; + u8 res4[3]; + u8 sdma_idsr2; + u8 res5[3]; + u8 sdma_idmr2; + u8 res6[3]; + u8 sdma_idsr3; + u8 res7[3]; + u8 sdma_idmr3; + u8 res8[3]; + u8 sdma_idsr4; + u8 res9[3]; + u8 sdma_idmr4; + u8 res10[707]; +} sdma_cpm2_t; + +/* Fast controllers +*/ +typedef struct fcc { + u32 fcc_gfmr; + u32 fcc_fpsmr; + u16 fcc_ftodr; + u8 res1[2]; + u16 fcc_fdsr; + u8 res2[2]; + u16 fcc_fcce; + u8 res3[2]; + u16 fcc_fccm; + u8 res4[2]; + u8 fcc_fccs; + u8 res5[3]; + u8 fcc_ftirr_phy[4]; +} fcc_t; + +/* Fast controllers continued + */ +typedef struct fcc_c { + u32 fcc_firper; + u32 fcc_firer; + u32 fcc_firsr_hi; + u32 fcc_firsr_lo; + u8 fcc_gfemr; + u8 res1[15]; +} fcc_c_t; + +/* TC Layer + */ +typedef struct tclayer { + u16 tc_tcmode; + u16 tc_cdsmr; + u16 tc_tcer; + u16 tc_rcc; + u16 tc_tcmr; + u16 tc_fcc; + u16 tc_ccc; + u16 tc_icc; + u16 tc_tcc; + u16 tc_ecc; + u8 res1[12]; +} tclayer_t; + + +/* I2C +*/ +typedef struct i2c { + u8 i2c_i2mod; + u8 res1[3]; + u8 i2c_i2add; + u8 res2[3]; + u8 i2c_i2brg; + u8 res3[3]; + u8 i2c_i2com; + u8 res4[3]; + u8 i2c_i2cer; + u8 res5[3]; + u8 i2c_i2cmr; + u8 res6[331]; +} i2c_cpm2_t; + +typedef struct scc { /* Serial communication channels */ + u32 scc_gsmrl; + u32 scc_gsmrh; + u16 scc_psmr; + u8 res1[2]; + u16 scc_todr; + u16 scc_dsr; + u16 scc_scce; + u8 res2[2]; + u16 scc_sccm; + u8 res3; + u8 scc_sccs; + u8 res4[8]; +} scc_t; + +typedef struct smc { /* Serial management channels */ + u8 res1[2]; + u16 smc_smcmr; + u8 res2[2]; + u8 smc_smce; + u8 res3[3]; + u8 smc_smcm; + u8 res4[5]; +} smc_t; + +/* Serial Peripheral Interface. +*/ +typedef struct spi_ctrl { + u16 spi_spmode; + u8 res1[4]; + u8 spi_spie; + u8 res2[3]; + u8 spi_spim; + u8 res3[2]; + u8 spi_spcom; + u8 res4[82]; +} spictl_cpm2_t; + +/* CPM Mux. +*/ +typedef struct cpmux { + u8 cmx_si1cr; + u8 res1; + u8 cmx_si2cr; + u8 res2; + u32 cmx_fcr; + u32 cmx_scr; + u8 cmx_smr; + u8 res3; + u16 cmx_uar; + u8 res4[16]; +} cpmux_t; + +/* SIRAM control +*/ +typedef struct siram { + u16 si_amr; + u16 si_bmr; + u16 si_cmr; + u16 si_dmr; + u8 si_gmr; + u8 res1; + u8 si_cmdr; + u8 res2; + u8 si_str; + u8 res3; + u16 si_rsr; +} siramctl_t; + +typedef struct mcc { + u16 mcc_mcce; + u8 res1[2]; + u16 mcc_mccm; + u8 res2[2]; + u8 mcc_mccf; + u8 res3[7]; +} mcc_t; + +typedef struct comm_proc { + u32 cp_cpcr; + u32 cp_rccr; + u8 res1[14]; + u16 cp_rter; + u8 res2[2]; + u16 cp_rtmr; + u16 cp_rtscr; + u8 res3[2]; + u32 cp_rtsr; + u8 res4[12]; +} cpm_cpm2_t; + +/* USB Controller. +*/ +typedef struct cpm_usb_ctlr { + u8 usb_usmod; + u8 usb_usadr; + u8 usb_uscom; + u8 res1[1]; + __be16 usb_usep[4]; + u8 res2[4]; + __be16 usb_usber; + u8 res3[2]; + __be16 usb_usbmr; + u8 usb_usbs; + u8 res4[7]; +} usb_cpm2_t; + +/* ...and the whole thing wrapped up.... +*/ + +typedef struct immap { + /* Some references are into the unique and known dpram spaces, + * others are from the generic base. + */ +#define im_dprambase im_dpram1 + u8 im_dpram1[16*1024]; + u8 res1[16*1024]; + u8 im_dpram2[4*1024]; + u8 res2[8*1024]; + u8 im_dpram3[4*1024]; + u8 res3[16*1024]; + + sysconf_cpm2_t im_siu_conf; /* SIU Configuration */ + memctl_cpm2_t im_memctl; /* Memory Controller */ + sit_cpm2_t im_sit; /* System Integration Timers */ + pci_cpm2_t im_pci; /* PCI Controller */ + intctl_cpm2_t im_intctl; /* Interrupt Controller */ + car_cpm2_t im_clkrst; /* Clocks and reset */ + iop_cpm2_t im_ioport; /* IO Port control/status */ + cpmtimer_cpm2_t im_cpmtimer; /* CPM timers */ + sdma_cpm2_t im_sdma; /* SDMA control/status */ + + fcc_t im_fcc[3]; /* Three FCCs */ + u8 res4z[32]; + fcc_c_t im_fcc_c[3]; /* Continued FCCs */ + + u8 res4[32]; + + tclayer_t im_tclayer[8]; /* Eight TCLayers */ + u16 tc_tcgsr; + u16 tc_tcger; + + /* First set of baud rate generators. + */ + u8 res[236]; + u32 im_brgc5; + u32 im_brgc6; + u32 im_brgc7; + u32 im_brgc8; + + u8 res5[608]; + + i2c_cpm2_t im_i2c; /* I2C control/status */ + cpm_cpm2_t im_cpm; /* Communication processor */ + + /* Second set of baud rate generators. + */ + u32 im_brgc1; + u32 im_brgc2; + u32 im_brgc3; + u32 im_brgc4; + + scc_t im_scc[4]; /* Four SCCs */ + smc_t im_smc[2]; /* Couple of SMCs */ + spictl_cpm2_t im_spi; /* A SPI */ + cpmux_t im_cpmux; /* CPM clock route mux */ + siramctl_t im_siramctl1; /* First SI RAM Control */ + mcc_t im_mcc1; /* First MCC */ + siramctl_t im_siramctl2; /* Second SI RAM Control */ + mcc_t im_mcc2; /* Second MCC */ + usb_cpm2_t im_usb; /* USB Controller */ + + u8 res6[1153]; + + u16 im_si1txram[256]; + u8 res7[512]; + u16 im_si1rxram[256]; + u8 res8[512]; + u16 im_si2txram[256]; + u8 res9[512]; + u16 im_si2rxram[256]; + u8 res10[512]; + u8 res11[4096]; +} cpm2_map_t; + +extern cpm2_map_t __iomem *cpm2_immr; + +#endif /* __IMMAP_CPM2__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/inst.h b/arch/powerpc/include/asm/inst.h new file mode 100644 index 000000000..cc73c1267 --- /dev/null +++ b/arch/powerpc/include/asm/inst.h @@ -0,0 +1,150 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_INST_H +#define _ASM_POWERPC_INST_H + +#include <asm/ppc-opcode.h> + +/* + * Instruction data type for POWER + */ + +struct ppc_inst { + u32 val; +#ifdef CONFIG_PPC64 + u32 suffix; +#endif +} __packed; + +static inline u32 ppc_inst_val(struct ppc_inst x) +{ + return x.val; +} + +static inline int ppc_inst_primary_opcode(struct ppc_inst x) +{ + return ppc_inst_val(x) >> 26; +} + +#ifdef CONFIG_PPC64 +#define ppc_inst(x) ((struct ppc_inst){ .val = (x), .suffix = 0xff }) + +#define ppc_inst_prefix(x, y) ((struct ppc_inst){ .val = (x), .suffix = (y) }) + +static inline u32 ppc_inst_suffix(struct ppc_inst x) +{ + return x.suffix; +} + +static inline bool ppc_inst_prefixed(struct ppc_inst x) +{ + return (ppc_inst_primary_opcode(x) == 1) && ppc_inst_suffix(x) != 0xff; +} + +static inline struct ppc_inst ppc_inst_swab(struct ppc_inst x) +{ + return ppc_inst_prefix(swab32(ppc_inst_val(x)), + swab32(ppc_inst_suffix(x))); +} + +static inline struct ppc_inst ppc_inst_read(const struct ppc_inst *ptr) +{ + u32 val, suffix; + + val = *(u32 *)ptr; + if ((val >> 26) == OP_PREFIX) { + suffix = *((u32 *)ptr + 1); + return ppc_inst_prefix(val, suffix); + } else { + return ppc_inst(val); + } +} + +static inline bool ppc_inst_equal(struct ppc_inst x, struct ppc_inst y) +{ + return *(u64 *)&x == *(u64 *)&y; +} + +#else + +#define ppc_inst(x) ((struct ppc_inst){ .val = x }) + +static inline bool ppc_inst_prefixed(struct ppc_inst x) +{ + return false; +} + +static inline u32 ppc_inst_suffix(struct ppc_inst x) +{ + return 0; +} + +static inline struct ppc_inst ppc_inst_swab(struct ppc_inst x) +{ + return ppc_inst(swab32(ppc_inst_val(x))); +} + +static inline struct ppc_inst ppc_inst_read(const struct ppc_inst *ptr) +{ + return *ptr; +} + +static inline bool ppc_inst_equal(struct ppc_inst x, struct ppc_inst y) +{ + return ppc_inst_val(x) == ppc_inst_val(y); +} + +#endif /* CONFIG_PPC64 */ + +static inline int ppc_inst_len(struct ppc_inst x) +{ + return ppc_inst_prefixed(x) ? 8 : 4; +} + +/* + * Return the address of the next instruction, if the instruction @value was + * located at @location. + */ +static inline struct ppc_inst *ppc_inst_next(void *location, struct ppc_inst *value) +{ + struct ppc_inst tmp; + + tmp = ppc_inst_read(value); + + return location + ppc_inst_len(tmp); +} + +static inline u64 ppc_inst_as_u64(struct ppc_inst x) +{ +#ifdef CONFIG_CPU_LITTLE_ENDIAN + return (u64)ppc_inst_suffix(x) << 32 | ppc_inst_val(x); +#else + return (u64)ppc_inst_val(x) << 32 | ppc_inst_suffix(x); +#endif +} + +#define PPC_INST_STR_LEN sizeof("00000000 00000000") + +static inline char *__ppc_inst_as_str(char str[PPC_INST_STR_LEN], struct ppc_inst x) +{ + if (ppc_inst_prefixed(x)) + sprintf(str, "%08x %08x", ppc_inst_val(x), ppc_inst_suffix(x)); + else + sprintf(str, "%08x", ppc_inst_val(x)); + + return str; +} + +#define ppc_inst_as_str(x) \ +({ \ + char __str[PPC_INST_STR_LEN]; \ + __ppc_inst_as_str(__str, x); \ + __str; \ +}) + +int probe_user_read_inst(struct ppc_inst *inst, + struct ppc_inst __user *nip); + +int probe_kernel_read_inst(struct ppc_inst *inst, + struct ppc_inst *src); + +#endif /* _ASM_POWERPC_INST_H */ diff --git a/arch/powerpc/include/asm/io-defs.h b/arch/powerpc/include/asm/io-defs.h new file mode 100644 index 000000000..faf8617cc --- /dev/null +++ b/arch/powerpc/include/asm/io-defs.h @@ -0,0 +1,61 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* This file is meant to be include multiple times by other headers */ +/* last 2 argments are used by platforms/cell/io-workarounds.[ch] */ + +DEF_PCI_AC_RET(readb, u8, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_RET(readw, u16, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_RET(readl, u32, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_RET(readw_be, u16, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_RET(readl_be, u32, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_NORET(writeb, (u8 val, PCI_IO_ADDR addr), (val, addr), mem, addr) +DEF_PCI_AC_NORET(writew, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr) +DEF_PCI_AC_NORET(writel, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr) +DEF_PCI_AC_NORET(writew_be, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr) +DEF_PCI_AC_NORET(writel_be, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr) + +#ifdef __powerpc64__ +DEF_PCI_AC_RET(readq, u64, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_RET(readq_be, u64, (const PCI_IO_ADDR addr), (addr), mem, addr) +DEF_PCI_AC_NORET(writeq, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr) +DEF_PCI_AC_NORET(writeq_be, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr) +#endif /* __powerpc64__ */ + +DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port), pio, port) +DEF_PCI_AC_RET(inw, u16, (unsigned long port), (port), pio, port) +DEF_PCI_AC_RET(inl, u32, (unsigned long port), (port), pio, port) +DEF_PCI_AC_NORET(outb, (u8 val, unsigned long port), (val, port), pio, port) +DEF_PCI_AC_NORET(outw, (u16 val, unsigned long port), (val, port), pio, port) +DEF_PCI_AC_NORET(outl, (u32 val, unsigned long port), (val, port), pio, port) + +DEF_PCI_AC_NORET(readsb, (const PCI_IO_ADDR a, void *b, unsigned long c), + (a, b, c), mem, a) +DEF_PCI_AC_NORET(readsw, (const PCI_IO_ADDR a, void *b, unsigned long c), + (a, b, c), mem, a) +DEF_PCI_AC_NORET(readsl, (const PCI_IO_ADDR a, void *b, unsigned long c), + (a, b, c), mem, a) +DEF_PCI_AC_NORET(writesb, (PCI_IO_ADDR a, const void *b, unsigned long c), + (a, b, c), mem, a) +DEF_PCI_AC_NORET(writesw, (PCI_IO_ADDR a, const void *b, unsigned long c), + (a, b, c), mem, a) +DEF_PCI_AC_NORET(writesl, (PCI_IO_ADDR a, const void *b, unsigned long c), + (a, b, c), mem, a) + +DEF_PCI_AC_NORET(insb, (unsigned long p, void *b, unsigned long c), + (p, b, c), pio, p) +DEF_PCI_AC_NORET(insw, (unsigned long p, void *b, unsigned long c), + (p, b, c), pio, p) +DEF_PCI_AC_NORET(insl, (unsigned long p, void *b, unsigned long c), + (p, b, c), pio, p) +DEF_PCI_AC_NORET(outsb, (unsigned long p, const void *b, unsigned long c), + (p, b, c), pio, p) +DEF_PCI_AC_NORET(outsw, (unsigned long p, const void *b, unsigned long c), + (p, b, c), pio, p) +DEF_PCI_AC_NORET(outsl, (unsigned long p, const void *b, unsigned long c), + (p, b, c), pio, p) + +DEF_PCI_AC_NORET(memset_io, (PCI_IO_ADDR a, int c, unsigned long n), + (a, c, n), mem, a) +DEF_PCI_AC_NORET(memcpy_fromio, (void *d, const PCI_IO_ADDR s, unsigned long n), + (d, s, n), mem, s) +DEF_PCI_AC_NORET(memcpy_toio, (PCI_IO_ADDR d, const void *s, unsigned long n), + (d, s, n), mem, d) diff --git a/arch/powerpc/include/asm/io-workarounds.h b/arch/powerpc/include/asm/io-workarounds.h new file mode 100644 index 000000000..3cce499fb --- /dev/null +++ b/arch/powerpc/include/asm/io-workarounds.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Support PCI IO workaround + * + * (C) Copyright 2007-2008 TOSHIBA CORPORATION + */ + +#ifndef _IO_WORKAROUNDS_H +#define _IO_WORKAROUNDS_H + +#ifdef CONFIG_PPC_IO_WORKAROUNDS +#include <linux/io.h> +#include <asm/pci-bridge.h> + +/* Bus info */ +struct iowa_bus { + struct pci_controller *phb; + struct ppc_pci_io *ops; + void *private; +}; + +void iowa_register_bus(struct pci_controller *, struct ppc_pci_io *, + int (*)(struct iowa_bus *, void *), void *); +struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR); +struct iowa_bus *iowa_pio_find_bus(unsigned long); + +extern struct ppc_pci_io spiderpci_ops; +extern int spiderpci_iowa_init(struct iowa_bus *, void *); + +#define SPIDER_PCI_REG_BASE 0xd000 +#define SPIDER_PCI_REG_SIZE 0x1000 +#define SPIDER_PCI_VCI_CNTL_STAT 0x0110 +#define SPIDER_PCI_DUMMY_READ 0x0810 +#define SPIDER_PCI_DUMMY_READ_BASE 0x0814 + +#endif + +#if defined(CONFIG_PPC_IO_WORKAROUNDS) && defined(CONFIG_PPC_INDIRECT_MMIO) +extern bool io_workaround_inited; + +static inline bool iowa_is_active(void) +{ + return unlikely(io_workaround_inited); +} +#else +static inline bool iowa_is_active(void) +{ + return false; +} +#endif + +void __iomem *iowa_ioremap(phys_addr_t addr, unsigned long size, + pgprot_t prot, void *caller); + +#endif /* _IO_WORKAROUNDS_H */ diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h new file mode 100644 index 000000000..0182b2912 --- /dev/null +++ b/arch/powerpc/include/asm/io.h @@ -0,0 +1,884 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_IO_H +#define _ASM_POWERPC_IO_H +#ifdef __KERNEL__ + +#define ARCH_HAS_IOREMAP_WC +#ifdef CONFIG_PPC32 +#define ARCH_HAS_IOREMAP_WT +#endif + +/* + */ + +/* Check of existence of legacy devices */ +extern int check_legacy_ioport(unsigned long base_port); +#define I8042_DATA_REG 0x60 +#define FDC_BASE 0x3f0 + +#if defined(CONFIG_PPC64) && defined(CONFIG_PCI) +extern struct pci_dev *isa_bridge_pcidev; +/* + * has legacy ISA devices ? + */ +#define arch_has_dev_port() (isa_bridge_pcidev != NULL || isa_io_special) +#endif + +#include <linux/device.h> +#include <linux/compiler.h> +#include <linux/mm.h> +#include <asm/page.h> +#include <asm/byteorder.h> +#include <asm/synch.h> +#include <asm/delay.h> +#include <asm/mmiowb.h> +#include <asm/mmu.h> +#include <asm/ppc_asm.h> + +#define SIO_CONFIG_RA 0x398 +#define SIO_CONFIG_RD 0x399 + +#define SLOW_DOWN_IO + +/* 32 bits uses slightly different variables for the various IO + * bases. Most of this file only uses _IO_BASE though which we + * define properly based on the platform + */ +#ifndef CONFIG_PCI +#define _IO_BASE 0 +#define _ISA_MEM_BASE 0 +#define PCI_DRAM_OFFSET 0 +#elif defined(CONFIG_PPC32) +#define _IO_BASE isa_io_base +#define _ISA_MEM_BASE isa_mem_base +#define PCI_DRAM_OFFSET pci_dram_offset +#else +#define _IO_BASE pci_io_base +#define _ISA_MEM_BASE isa_mem_base +#define PCI_DRAM_OFFSET 0 +#endif + +extern unsigned long isa_io_base; +extern unsigned long pci_io_base; +extern unsigned long pci_dram_offset; + +extern resource_size_t isa_mem_base; + +/* Boolean set by platform if PIO accesses are suppored while _IO_BASE + * is not set or addresses cannot be translated to MMIO. This is typically + * set when the platform supports "special" PIO accesses via a non memory + * mapped mechanism, and allows things like the early udbg UART code to + * function. + */ +extern bool isa_io_special; + +#ifdef CONFIG_PPC32 +#if defined(CONFIG_PPC_INDIRECT_PIO) || defined(CONFIG_PPC_INDIRECT_MMIO) +#error CONFIG_PPC_INDIRECT_{PIO,MMIO} are not yet supported on 32 bits +#endif +#endif + +/* + * + * Low level MMIO accessors + * + * This provides the non-bus specific accessors to MMIO. Those are PowerPC + * specific and thus shouldn't be used in generic code. The accessors + * provided here are: + * + * in_8, in_le16, in_be16, in_le32, in_be32, in_le64, in_be64 + * out_8, out_le16, out_be16, out_le32, out_be32, out_le64, out_be64 + * _insb, _insw_ns, _insl_ns, _outsb, _outsw_ns, _outsl_ns + * + * Those operate directly on a kernel virtual address. Note that the prototype + * for the out_* accessors has the arguments in opposite order from the usual + * linux PCI accessors. Unlike those, they take the address first and the value + * next. + * + * Note: I might drop the _ns suffix on the stream operations soon as it is + * simply normal for stream operations to not swap in the first place. + * + */ + +#define DEF_MMIO_IN_X(name, size, insn) \ +static inline u##size name(const volatile u##size __iomem *addr) \ +{ \ + u##size ret; \ + __asm__ __volatile__("sync;"#insn" %0,%y1;twi 0,%0,0;isync" \ + : "=r" (ret) : "Z" (*addr) : "memory"); \ + return ret; \ +} + +#define DEF_MMIO_OUT_X(name, size, insn) \ +static inline void name(volatile u##size __iomem *addr, u##size val) \ +{ \ + __asm__ __volatile__("sync;"#insn" %1,%y0" \ + : "=Z" (*addr) : "r" (val) : "memory"); \ + mmiowb_set_pending(); \ +} + +#define DEF_MMIO_IN_D(name, size, insn) \ +static inline u##size name(const volatile u##size __iomem *addr) \ +{ \ + u##size ret; \ + __asm__ __volatile__("sync;"#insn"%U1%X1 %0,%1;twi 0,%0,0;isync"\ + : "=r" (ret) : "m" (*addr) : "memory"); \ + return ret; \ +} + +#define DEF_MMIO_OUT_D(name, size, insn) \ +static inline void name(volatile u##size __iomem *addr, u##size val) \ +{ \ + __asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0" \ + : "=m" (*addr) : "r" (val) : "memory"); \ + mmiowb_set_pending(); \ +} + +DEF_MMIO_IN_D(in_8, 8, lbz); +DEF_MMIO_OUT_D(out_8, 8, stb); + +#ifdef __BIG_ENDIAN__ +DEF_MMIO_IN_D(in_be16, 16, lhz); +DEF_MMIO_IN_D(in_be32, 32, lwz); +DEF_MMIO_IN_X(in_le16, 16, lhbrx); +DEF_MMIO_IN_X(in_le32, 32, lwbrx); + +DEF_MMIO_OUT_D(out_be16, 16, sth); +DEF_MMIO_OUT_D(out_be32, 32, stw); +DEF_MMIO_OUT_X(out_le16, 16, sthbrx); +DEF_MMIO_OUT_X(out_le32, 32, stwbrx); +#else +DEF_MMIO_IN_X(in_be16, 16, lhbrx); +DEF_MMIO_IN_X(in_be32, 32, lwbrx); +DEF_MMIO_IN_D(in_le16, 16, lhz); +DEF_MMIO_IN_D(in_le32, 32, lwz); + +DEF_MMIO_OUT_X(out_be16, 16, sthbrx); +DEF_MMIO_OUT_X(out_be32, 32, stwbrx); +DEF_MMIO_OUT_D(out_le16, 16, sth); +DEF_MMIO_OUT_D(out_le32, 32, stw); + +#endif /* __BIG_ENDIAN */ + +#ifdef __powerpc64__ + +#ifdef __BIG_ENDIAN__ +DEF_MMIO_OUT_D(out_be64, 64, std); +DEF_MMIO_IN_D(in_be64, 64, ld); + +/* There is no asm instructions for 64 bits reverse loads and stores */ +static inline u64 in_le64(const volatile u64 __iomem *addr) +{ + return swab64(in_be64(addr)); +} + +static inline void out_le64(volatile u64 __iomem *addr, u64 val) +{ + out_be64(addr, swab64(val)); +} +#else +DEF_MMIO_OUT_D(out_le64, 64, std); +DEF_MMIO_IN_D(in_le64, 64, ld); + +/* There is no asm instructions for 64 bits reverse loads and stores */ +static inline u64 in_be64(const volatile u64 __iomem *addr) +{ + return swab64(in_le64(addr)); +} + +static inline void out_be64(volatile u64 __iomem *addr, u64 val) +{ + out_le64(addr, swab64(val)); +} + +#endif +#endif /* __powerpc64__ */ + +/* + * Low level IO stream instructions are defined out of line for now + */ +extern void _insb(const volatile u8 __iomem *addr, void *buf, long count); +extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count); +extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count); +extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count); +extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count); +extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count); + +/* The _ns naming is historical and will be removed. For now, just #define + * the non _ns equivalent names + */ +#define _insw _insw_ns +#define _insl _insl_ns +#define _outsw _outsw_ns +#define _outsl _outsl_ns + + +/* + * memset_io, memcpy_toio, memcpy_fromio base implementations are out of line + */ + +extern void _memset_io(volatile void __iomem *addr, int c, unsigned long n); +extern void _memcpy_fromio(void *dest, const volatile void __iomem *src, + unsigned long n); +extern void _memcpy_toio(volatile void __iomem *dest, const void *src, + unsigned long n); + +/* + * + * PCI and standard ISA accessors + * + * Those are globally defined linux accessors for devices on PCI or ISA + * busses. They follow the Linux defined semantics. The current implementation + * for PowerPC is as close as possible to the x86 version of these, and thus + * provides fairly heavy weight barriers for the non-raw versions + * + * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_MMIO + * or CONFIG_PPC_INDIRECT_PIO are set allowing the platform to provide its + * own implementation of some or all of the accessors. + */ + +/* + * Include the EEH definitions when EEH is enabled only so they don't get + * in the way when building for 32 bits + */ +#ifdef CONFIG_EEH +#include <asm/eeh.h> +#endif + +/* Shortcut to the MMIO argument pointer */ +#define PCI_IO_ADDR volatile void __iomem * + +/* Indirect IO address tokens: + * + * When CONFIG_PPC_INDIRECT_MMIO is set, the platform can provide hooks + * on all MMIOs. (Note that this is all 64 bits only for now) + * + * To help platforms who may need to differentiate MMIO addresses in + * their hooks, a bitfield is reserved for use by the platform near the + * top of MMIO addresses (not PIO, those have to cope the hard way). + * + * The highest address in the kernel virtual space are: + * + * d0003fffffffffff # with Hash MMU + * c00fffffffffffff # with Radix MMU + * + * The top 4 bits are reserved as the region ID on hash, leaving us 8 bits + * that can be used for the field. + * + * The direct IO mapping operations will then mask off those bits + * before doing the actual access, though that only happen when + * CONFIG_PPC_INDIRECT_MMIO is set, thus be careful when you use that + * mechanism + * + * For PIO, there is a separate CONFIG_PPC_INDIRECT_PIO which makes + * all PIO functions call through a hook. + */ + +#ifdef CONFIG_PPC_INDIRECT_MMIO +#define PCI_IO_IND_TOKEN_SHIFT 52 +#define PCI_IO_IND_TOKEN_MASK (0xfful << PCI_IO_IND_TOKEN_SHIFT) +#define PCI_FIX_ADDR(addr) \ + ((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK)) +#define PCI_GET_ADDR_TOKEN(addr) \ + (((unsigned long)(addr) & PCI_IO_IND_TOKEN_MASK) >> \ + PCI_IO_IND_TOKEN_SHIFT) +#define PCI_SET_ADDR_TOKEN(addr, token) \ +do { \ + unsigned long __a = (unsigned long)(addr); \ + __a &= ~PCI_IO_IND_TOKEN_MASK; \ + __a |= ((unsigned long)(token)) << PCI_IO_IND_TOKEN_SHIFT; \ + (addr) = (void __iomem *)__a; \ +} while(0) +#else +#define PCI_FIX_ADDR(addr) (addr) +#endif + + +/* + * Non ordered and non-swapping "raw" accessors + */ + +static inline unsigned char __raw_readb(const volatile void __iomem *addr) +{ + return *(volatile unsigned char __force *)PCI_FIX_ADDR(addr); +} +static inline unsigned short __raw_readw(const volatile void __iomem *addr) +{ + return *(volatile unsigned short __force *)PCI_FIX_ADDR(addr); +} +static inline unsigned int __raw_readl(const volatile void __iomem *addr) +{ + return *(volatile unsigned int __force *)PCI_FIX_ADDR(addr); +} +static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr) +{ + *(volatile unsigned char __force *)PCI_FIX_ADDR(addr) = v; +} +static inline void __raw_writew(unsigned short v, volatile void __iomem *addr) +{ + *(volatile unsigned short __force *)PCI_FIX_ADDR(addr) = v; +} +static inline void __raw_writel(unsigned int v, volatile void __iomem *addr) +{ + *(volatile unsigned int __force *)PCI_FIX_ADDR(addr) = v; +} + +#ifdef __powerpc64__ +static inline unsigned long __raw_readq(const volatile void __iomem *addr) +{ + return *(volatile unsigned long __force *)PCI_FIX_ADDR(addr); +} +static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) +{ + *(volatile unsigned long __force *)PCI_FIX_ADDR(addr) = v; +} + +static inline void __raw_writeq_be(unsigned long v, volatile void __iomem *addr) +{ + __raw_writeq((__force unsigned long)cpu_to_be64(v), addr); +} + +/* + * Real mode versions of the above. Those instructions are only supposed + * to be used in hypervisor real mode as per the architecture spec. + */ +static inline void __raw_rm_writeb(u8 val, volatile void __iomem *paddr) +{ + __asm__ __volatile__(".machine push; \ + .machine power6; \ + stbcix %0,0,%1; \ + .machine pop;" + : : "r" (val), "r" (paddr) : "memory"); +} + +static inline void __raw_rm_writew(u16 val, volatile void __iomem *paddr) +{ + __asm__ __volatile__(".machine push; \ + .machine power6; \ + sthcix %0,0,%1; \ + .machine pop;" + : : "r" (val), "r" (paddr) : "memory"); +} + +static inline void __raw_rm_writel(u32 val, volatile void __iomem *paddr) +{ + __asm__ __volatile__(".machine push; \ + .machine power6; \ + stwcix %0,0,%1; \ + .machine pop;" + : : "r" (val), "r" (paddr) : "memory"); +} + +static inline void __raw_rm_writeq(u64 val, volatile void __iomem *paddr) +{ + __asm__ __volatile__(".machine push; \ + .machine power6; \ + stdcix %0,0,%1; \ + .machine pop;" + : : "r" (val), "r" (paddr) : "memory"); +} + +static inline void __raw_rm_writeq_be(u64 val, volatile void __iomem *paddr) +{ + __raw_rm_writeq((__force u64)cpu_to_be64(val), paddr); +} + +static inline u8 __raw_rm_readb(volatile void __iomem *paddr) +{ + u8 ret; + __asm__ __volatile__(".machine push; \ + .machine power6; \ + lbzcix %0,0, %1; \ + .machine pop;" + : "=r" (ret) : "r" (paddr) : "memory"); + return ret; +} + +static inline u16 __raw_rm_readw(volatile void __iomem *paddr) +{ + u16 ret; + __asm__ __volatile__(".machine push; \ + .machine power6; \ + lhzcix %0,0, %1; \ + .machine pop;" + : "=r" (ret) : "r" (paddr) : "memory"); + return ret; +} + +static inline u32 __raw_rm_readl(volatile void __iomem *paddr) +{ + u32 ret; + __asm__ __volatile__(".machine push; \ + .machine power6; \ + lwzcix %0,0, %1; \ + .machine pop;" + : "=r" (ret) : "r" (paddr) : "memory"); + return ret; +} + +static inline u64 __raw_rm_readq(volatile void __iomem *paddr) +{ + u64 ret; + __asm__ __volatile__(".machine push; \ + .machine power6; \ + ldcix %0,0, %1; \ + .machine pop;" + : "=r" (ret) : "r" (paddr) : "memory"); + return ret; +} +#endif /* __powerpc64__ */ + +/* + * + * PCI PIO and MMIO accessors. + * + * + * On 32 bits, PIO operations have a recovery mechanism in case they trigger + * machine checks (which they occasionally do when probing non existing + * IO ports on some platforms, like PowerMac and 8xx). + * I always found it to be of dubious reliability and I am tempted to get + * rid of it one of these days. So if you think it's important to keep it, + * please voice up asap. We never had it for 64 bits and I do not intend + * to port it over + */ + +#ifdef CONFIG_PPC32 + +#define __do_in_asm(name, op) \ +static inline unsigned int name(unsigned int port) \ +{ \ + unsigned int x; \ + __asm__ __volatile__( \ + "sync\n" \ + "0:" op " %0,0,%1\n" \ + "1: twi 0,%0,0\n" \ + "2: isync\n" \ + "3: nop\n" \ + "4:\n" \ + ".section .fixup,\"ax\"\n" \ + "5: li %0,-1\n" \ + " b 4b\n" \ + ".previous\n" \ + EX_TABLE(0b, 5b) \ + EX_TABLE(1b, 5b) \ + EX_TABLE(2b, 5b) \ + EX_TABLE(3b, 5b) \ + : "=&r" (x) \ + : "r" (port + _IO_BASE) \ + : "memory"); \ + return x; \ +} + +#define __do_out_asm(name, op) \ +static inline void name(unsigned int val, unsigned int port) \ +{ \ + __asm__ __volatile__( \ + "sync\n" \ + "0:" op " %0,0,%1\n" \ + "1: sync\n" \ + "2:\n" \ + EX_TABLE(0b, 2b) \ + EX_TABLE(1b, 2b) \ + : : "r" (val), "r" (port + _IO_BASE) \ + : "memory"); \ +} + +__do_in_asm(_rec_inb, "lbzx") +__do_in_asm(_rec_inw, "lhbrx") +__do_in_asm(_rec_inl, "lwbrx") +__do_out_asm(_rec_outb, "stbx") +__do_out_asm(_rec_outw, "sthbrx") +__do_out_asm(_rec_outl, "stwbrx") + +#endif /* CONFIG_PPC32 */ + +/* The "__do_*" operations below provide the actual "base" implementation + * for each of the defined accessors. Some of them use the out_* functions + * directly, some of them still use EEH, though we might change that in the + * future. Those macros below provide the necessary argument swapping and + * handling of the IO base for PIO. + * + * They are themselves used by the macros that define the actual accessors + * and can be used by the hooks if any. + * + * Note that PIO operations are always defined in terms of their corresonding + * MMIO operations. That allows platforms like iSeries who want to modify the + * behaviour of both to only hook on the MMIO version and get both. It's also + * possible to hook directly at the toplevel PIO operation if they have to + * be handled differently + */ +#define __do_writeb(val, addr) out_8(PCI_FIX_ADDR(addr), val) +#define __do_writew(val, addr) out_le16(PCI_FIX_ADDR(addr), val) +#define __do_writel(val, addr) out_le32(PCI_FIX_ADDR(addr), val) +#define __do_writeq(val, addr) out_le64(PCI_FIX_ADDR(addr), val) +#define __do_writew_be(val, addr) out_be16(PCI_FIX_ADDR(addr), val) +#define __do_writel_be(val, addr) out_be32(PCI_FIX_ADDR(addr), val) +#define __do_writeq_be(val, addr) out_be64(PCI_FIX_ADDR(addr), val) + +#ifdef CONFIG_EEH +#define __do_readb(addr) eeh_readb(PCI_FIX_ADDR(addr)) +#define __do_readw(addr) eeh_readw(PCI_FIX_ADDR(addr)) +#define __do_readl(addr) eeh_readl(PCI_FIX_ADDR(addr)) +#define __do_readq(addr) eeh_readq(PCI_FIX_ADDR(addr)) +#define __do_readw_be(addr) eeh_readw_be(PCI_FIX_ADDR(addr)) +#define __do_readl_be(addr) eeh_readl_be(PCI_FIX_ADDR(addr)) +#define __do_readq_be(addr) eeh_readq_be(PCI_FIX_ADDR(addr)) +#else /* CONFIG_EEH */ +#define __do_readb(addr) in_8(PCI_FIX_ADDR(addr)) +#define __do_readw(addr) in_le16(PCI_FIX_ADDR(addr)) +#define __do_readl(addr) in_le32(PCI_FIX_ADDR(addr)) +#define __do_readq(addr) in_le64(PCI_FIX_ADDR(addr)) +#define __do_readw_be(addr) in_be16(PCI_FIX_ADDR(addr)) +#define __do_readl_be(addr) in_be32(PCI_FIX_ADDR(addr)) +#define __do_readq_be(addr) in_be64(PCI_FIX_ADDR(addr)) +#endif /* !defined(CONFIG_EEH) */ + +#ifdef CONFIG_PPC32 +#define __do_outb(val, port) _rec_outb(val, port) +#define __do_outw(val, port) _rec_outw(val, port) +#define __do_outl(val, port) _rec_outl(val, port) +#define __do_inb(port) _rec_inb(port) +#define __do_inw(port) _rec_inw(port) +#define __do_inl(port) _rec_inl(port) +#else /* CONFIG_PPC32 */ +#define __do_outb(val, port) writeb(val,(PCI_IO_ADDR)_IO_BASE+port); +#define __do_outw(val, port) writew(val,(PCI_IO_ADDR)_IO_BASE+port); +#define __do_outl(val, port) writel(val,(PCI_IO_ADDR)_IO_BASE+port); +#define __do_inb(port) readb((PCI_IO_ADDR)_IO_BASE + port); +#define __do_inw(port) readw((PCI_IO_ADDR)_IO_BASE + port); +#define __do_inl(port) readl((PCI_IO_ADDR)_IO_BASE + port); +#endif /* !CONFIG_PPC32 */ + +#ifdef CONFIG_EEH +#define __do_readsb(a, b, n) eeh_readsb(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsw(a, b, n) eeh_readsw(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsl(a, b, n) eeh_readsl(PCI_FIX_ADDR(a), (b), (n)) +#else /* CONFIG_EEH */ +#define __do_readsb(a, b, n) _insb(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsw(a, b, n) _insw(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsl(a, b, n) _insl(PCI_FIX_ADDR(a), (b), (n)) +#endif /* !CONFIG_EEH */ +#define __do_writesb(a, b, n) _outsb(PCI_FIX_ADDR(a),(b),(n)) +#define __do_writesw(a, b, n) _outsw(PCI_FIX_ADDR(a),(b),(n)) +#define __do_writesl(a, b, n) _outsl(PCI_FIX_ADDR(a),(b),(n)) + +#define __do_insb(p, b, n) readsb((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) +#define __do_insw(p, b, n) readsw((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) +#define __do_insl(p, b, n) readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) +#define __do_outsb(p, b, n) writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) +#define __do_outsw(p, b, n) writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) +#define __do_outsl(p, b, n) writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) + +#define __do_memset_io(addr, c, n) \ + _memset_io(PCI_FIX_ADDR(addr), c, n) +#define __do_memcpy_toio(dst, src, n) \ + _memcpy_toio(PCI_FIX_ADDR(dst), src, n) + +#ifdef CONFIG_EEH +#define __do_memcpy_fromio(dst, src, n) \ + eeh_memcpy_fromio(dst, PCI_FIX_ADDR(src), n) +#else /* CONFIG_EEH */ +#define __do_memcpy_fromio(dst, src, n) \ + _memcpy_fromio(dst,PCI_FIX_ADDR(src),n) +#endif /* !CONFIG_EEH */ + +#ifdef CONFIG_PPC_INDIRECT_PIO +#define DEF_PCI_HOOK_pio(x) x +#else +#define DEF_PCI_HOOK_pio(x) NULL +#endif + +#ifdef CONFIG_PPC_INDIRECT_MMIO +#define DEF_PCI_HOOK_mem(x) x +#else +#define DEF_PCI_HOOK_mem(x) NULL +#endif + +/* Structure containing all the hooks */ +extern struct ppc_pci_io { + +#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) ret (*name) at; +#define DEF_PCI_AC_NORET(name, at, al, space, aa) void (*name) at; + +#include <asm/io-defs.h> + +#undef DEF_PCI_AC_RET +#undef DEF_PCI_AC_NORET + +} ppc_pci_io; + +/* The inline wrappers */ +#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) \ +static inline ret name at \ +{ \ + if (DEF_PCI_HOOK_##space(ppc_pci_io.name) != NULL) \ + return ppc_pci_io.name al; \ + return __do_##name al; \ +} + +#define DEF_PCI_AC_NORET(name, at, al, space, aa) \ +static inline void name at \ +{ \ + if (DEF_PCI_HOOK_##space(ppc_pci_io.name) != NULL) \ + ppc_pci_io.name al; \ + else \ + __do_##name al; \ +} + +#include <asm/io-defs.h> + +#undef DEF_PCI_AC_RET +#undef DEF_PCI_AC_NORET + +/* Some drivers check for the presence of readq & writeq with + * a #ifdef, so we make them happy here. + */ +#ifdef __powerpc64__ +#define readq readq +#define writeq writeq +#endif + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +/* + * We don't do relaxed operations yet, at least not with this semantic + */ +#define readb_relaxed(addr) readb(addr) +#define readw_relaxed(addr) readw(addr) +#define readl_relaxed(addr) readl(addr) +#define readq_relaxed(addr) readq(addr) +#define writeb_relaxed(v, addr) writeb(v, addr) +#define writew_relaxed(v, addr) writew(v, addr) +#define writel_relaxed(v, addr) writel(v, addr) +#define writeq_relaxed(v, addr) writeq(v, addr) + +#include <asm-generic/iomap.h> + +static inline void iosync(void) +{ + __asm__ __volatile__ ("sync" : : : "memory"); +} + +/* Enforce in-order execution of data I/O. + * No distinction between read/write on PPC; use eieio for all three. + * Those are fairly week though. They don't provide a barrier between + * MMIO and cacheable storage nor do they provide a barrier vs. locks, + * they only provide barriers between 2 __raw MMIO operations and + * possibly break write combining. + */ +#define iobarrier_rw() eieio() +#define iobarrier_r() eieio() +#define iobarrier_w() eieio() + + +/* + * output pause versions need a delay at least for the + * w83c105 ide controller in a p610. + */ +#define inb_p(port) inb(port) +#define outb_p(val, port) (udelay(1), outb((val), (port))) +#define inw_p(port) inw(port) +#define outw_p(val, port) (udelay(1), outw((val), (port))) +#define inl_p(port) inl(port) +#define outl_p(val, port) (udelay(1), outl((val), (port))) + + +#define IO_SPACE_LIMIT ~(0UL) + + +/** + * ioremap - map bus memory into CPU space + * @address: bus address of the memory + * @size: size of the resource to map + * + * ioremap performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. + * + * We provide a few variations of it: + * + * * ioremap is the standard one and provides non-cacheable guarded mappings + * and can be hooked by the platform via ppc_md + * + * * ioremap_prot allows to specify the page flags as an argument and can + * also be hooked by the platform via ppc_md. + * + * * ioremap_wc enables write combining + * + * * ioremap_wt enables write through + * + * * ioremap_coherent maps coherent cached memory + * + * * iounmap undoes such a mapping and can be hooked + * + * * __ioremap_caller is the same as above but takes an explicit caller + * reference rather than using __builtin_return_address(0) + * + */ +extern void __iomem *ioremap(phys_addr_t address, unsigned long size); +extern void __iomem *ioremap_prot(phys_addr_t address, unsigned long size, + unsigned long flags); +extern void __iomem *ioremap_wc(phys_addr_t address, unsigned long size); +void __iomem *ioremap_wt(phys_addr_t address, unsigned long size); +void __iomem *ioremap_coherent(phys_addr_t address, unsigned long size); +#define ioremap_uc(addr, size) ioremap((addr), (size)) +#define ioremap_cache(addr, size) \ + ioremap_prot((addr), (size), pgprot_val(PAGE_KERNEL)) + +extern void iounmap(volatile void __iomem *addr); + +void __iomem *ioremap_phb(phys_addr_t paddr, unsigned long size); + +int early_ioremap_range(unsigned long ea, phys_addr_t pa, + unsigned long size, pgprot_t prot); +void __iomem *do_ioremap(phys_addr_t pa, phys_addr_t offset, unsigned long size, + pgprot_t prot, void *caller); + +extern void __iomem *__ioremap_caller(phys_addr_t, unsigned long size, + pgprot_t prot, void *caller); + +/* + * When CONFIG_PPC_INDIRECT_PIO is set, we use the generic iomap implementation + * which needs some additional definitions here. They basically allow PIO + * space overall to be 1GB. This will work as long as we never try to use + * iomap to map MMIO below 1GB which should be fine on ppc64 + */ +#define HAVE_ARCH_PIO_SIZE 1 +#define PIO_OFFSET 0x00000000UL +#define PIO_MASK (FULL_IO_SIZE - 1) +#define PIO_RESERVED (FULL_IO_SIZE) + +#define mmio_read16be(addr) readw_be(addr) +#define mmio_read32be(addr) readl_be(addr) +#define mmio_read64be(addr) readq_be(addr) +#define mmio_write16be(val, addr) writew_be(val, addr) +#define mmio_write32be(val, addr) writel_be(val, addr) +#define mmio_write64be(val, addr) writeq_be(val, addr) +#define mmio_insb(addr, dst, count) readsb(addr, dst, count) +#define mmio_insw(addr, dst, count) readsw(addr, dst, count) +#define mmio_insl(addr, dst, count) readsl(addr, dst, count) +#define mmio_outsb(addr, src, count) writesb(addr, src, count) +#define mmio_outsw(addr, src, count) writesw(addr, src, count) +#define mmio_outsl(addr, src, count) writesl(addr, src, count) + +/** + * virt_to_phys - map virtual addresses to physical + * @address: address to remap + * + * The returned physical address is the physical (CPU) mapping for + * the memory address given. It is only valid to use this function on + * addresses directly mapped or allocated via kmalloc. + * + * This function does not give bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ +static inline unsigned long virt_to_phys(volatile void * address) +{ + WARN_ON(IS_ENABLED(CONFIG_DEBUG_VIRTUAL) && !virt_addr_valid(address)); + + return __pa((unsigned long)address); +} + +/** + * phys_to_virt - map physical address to virtual + * @address: address to remap + * + * The returned virtual address is a current CPU mapping for + * the memory address given. It is only valid to use this function on + * addresses that have a kernel mapping + * + * This function does not handle bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ +static inline void * phys_to_virt(unsigned long address) +{ + return (void *)__va(address); +} + +/* + * Change "struct page" to physical address. + */ +static inline phys_addr_t page_to_phys(struct page *page) +{ + unsigned long pfn = page_to_pfn(page); + + WARN_ON(IS_ENABLED(CONFIG_DEBUG_VIRTUAL) && !pfn_valid(pfn)); + + return PFN_PHYS(pfn); +} + +/* + * 32 bits still uses virt_to_bus() for it's implementation of DMA + * mappings se we have to keep it defined here. We also have some old + * drivers (shame shame shame) that use bus_to_virt() and haven't been + * fixed yet so I need to define it here. + */ +#ifdef CONFIG_PPC32 + +static inline unsigned long virt_to_bus(volatile void * address) +{ + if (address == NULL) + return 0; + return __pa(address) + PCI_DRAM_OFFSET; +} + +static inline void * bus_to_virt(unsigned long address) +{ + if (address == 0) + return NULL; + return __va(address - PCI_DRAM_OFFSET); +} + +#define page_to_bus(page) (page_to_phys(page) + PCI_DRAM_OFFSET) + +#endif /* CONFIG_PPC32 */ + +/* access ports */ +#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) | (_v)) +#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v)) + +#define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) | (_v)) +#define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v)) + +#define setbits8(_addr, _v) out_8((_addr), in_8(_addr) | (_v)) +#define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v)) + +/* Clear and set bits in one shot. These macros can be used to clear and + * set multiple bits in a register using a single read-modify-write. These + * macros can also be used to set a multiple-bit bit pattern using a mask, + * by specifying the mask in the 'clear' parameter and the new bit pattern + * in the 'set' parameter. + */ + +#define clrsetbits(type, addr, clear, set) \ + out_##type((addr), (in_##type(addr) & ~(clear)) | (set)) + +#ifdef __powerpc64__ +#define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set) +#define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set) +#endif + +#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set) +#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set) + +#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set) +#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set) + +#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_IO_H */ diff --git a/arch/powerpc/include/asm/io_event_irq.h b/arch/powerpc/include/asm/io_event_irq.h new file mode 100644 index 000000000..290c7530d --- /dev/null +++ b/arch/powerpc/include/asm/io_event_irq.h @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2010, 2011 Mark Nelson and Tseng-Hui (Frank) Lin, IBM Corporation + */ + +#ifndef _ASM_POWERPC_IO_EVENT_IRQ_H +#define _ASM_POWERPC_IO_EVENT_IRQ_H + +#include <linux/types.h> +#include <linux/notifier.h> + +#define PSERIES_IOEI_RPC_MAX_LEN 216 + +#define PSERIES_IOEI_TYPE_ERR_DETECTED 0x01 +#define PSERIES_IOEI_TYPE_ERR_RECOVERED 0x02 +#define PSERIES_IOEI_TYPE_EVENT 0x03 +#define PSERIES_IOEI_TYPE_RPC_PASS_THRU 0x04 + +#define PSERIES_IOEI_SUBTYPE_NOT_APP 0x00 +#define PSERIES_IOEI_SUBTYPE_REBALANCE_REQ 0x01 +#define PSERIES_IOEI_SUBTYPE_NODE_ONLINE 0x03 +#define PSERIES_IOEI_SUBTYPE_NODE_OFFLINE 0x04 +#define PSERIES_IOEI_SUBTYPE_DUMP_SIZE_CHANGE 0x05 +#define PSERIES_IOEI_SUBTYPE_TORRENT_IRV_UPDATE 0x06 +#define PSERIES_IOEI_SUBTYPE_TORRENT_HFI_CFGED 0x07 + +#define PSERIES_IOEI_SCOPE_NOT_APP 0x00 +#define PSERIES_IOEI_SCOPE_RIO_HUB 0x36 +#define PSERIES_IOEI_SCOPE_RIO_BRIDGE 0x37 +#define PSERIES_IOEI_SCOPE_PHB 0x38 +#define PSERIES_IOEI_SCOPE_EADS_GLOBAL 0x39 +#define PSERIES_IOEI_SCOPE_EADS_SLOT 0x3A +#define PSERIES_IOEI_SCOPE_TORRENT_HUB 0x3B +#define PSERIES_IOEI_SCOPE_SERVICE_PROC 0x51 + +/* Platform Event Log Format, Version 6, data portition of IO event section */ +struct pseries_io_event { + uint8_t event_type; /* 0x00 IO-Event Type */ + uint8_t rpc_data_len; /* 0x01 RPC data length */ + uint8_t scope; /* 0x02 Error/Event Scope */ + uint8_t event_subtype; /* 0x03 I/O-Event Sub-Type */ + uint32_t drc_index; /* 0x04 DRC Index */ + uint8_t rpc_data[PSERIES_IOEI_RPC_MAX_LEN]; + /* 0x08 RPC Data (0-216 bytes, */ + /* padded to 4 bytes alignment) */ +}; + +extern struct atomic_notifier_head pseries_ioei_notifier_list; + +#endif /* _ASM_POWERPC_IO_EVENT_IRQ_H */ diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h new file mode 100644 index 000000000..deef7c94d --- /dev/null +++ b/arch/powerpc/include/asm/iommu.h @@ -0,0 +1,328 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation + * Rewrite, cleanup: + * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation + */ + +#ifndef _ASM_IOMMU_H +#define _ASM_IOMMU_H +#ifdef __KERNEL__ + +#include <linux/compiler.h> +#include <linux/spinlock.h> +#include <linux/device.h> +#include <linux/dma-map-ops.h> +#include <linux/bitops.h> +#include <asm/machdep.h> +#include <asm/types.h> +#include <asm/pci-bridge.h> +#include <asm/asm-const.h> + +#define IOMMU_PAGE_SHIFT_4K 12 +#define IOMMU_PAGE_SIZE_4K (ASM_CONST(1) << IOMMU_PAGE_SHIFT_4K) +#define IOMMU_PAGE_MASK_4K (~((1 << IOMMU_PAGE_SHIFT_4K) - 1)) +#define IOMMU_PAGE_ALIGN_4K(addr) ALIGN(addr, IOMMU_PAGE_SIZE_4K) + +#define IOMMU_PAGE_SIZE(tblptr) (ASM_CONST(1) << (tblptr)->it_page_shift) +#define IOMMU_PAGE_MASK(tblptr) (~((1 << (tblptr)->it_page_shift) - 1)) +#define IOMMU_PAGE_ALIGN(addr, tblptr) ALIGN(addr, IOMMU_PAGE_SIZE(tblptr)) + +/* Boot time flags */ +extern int iommu_is_off; +extern int iommu_force_on; + +struct iommu_table_ops { + /* + * When called with direction==DMA_NONE, it is equal to clear(). + * uaddr is a linear map address. + */ + int (*set)(struct iommu_table *tbl, + long index, long npages, + unsigned long uaddr, + enum dma_data_direction direction, + unsigned long attrs); +#ifdef CONFIG_IOMMU_API + /* + * Exchanges existing TCE with new TCE plus direction bits; + * returns old TCE and DMA direction mask. + * @tce is a physical address. + */ + int (*xchg_no_kill)(struct iommu_table *tbl, + long index, + unsigned long *hpa, + enum dma_data_direction *direction, + bool realmode); + + void (*tce_kill)(struct iommu_table *tbl, + unsigned long index, + unsigned long pages, + bool realmode); + + __be64 *(*useraddrptr)(struct iommu_table *tbl, long index, bool alloc); +#endif + void (*clear)(struct iommu_table *tbl, + long index, long npages); + /* get() returns a physical address */ + unsigned long (*get)(struct iommu_table *tbl, long index); + void (*flush)(struct iommu_table *tbl); + void (*free)(struct iommu_table *tbl); +}; + +/* These are used by VIO */ +extern struct iommu_table_ops iommu_table_lpar_multi_ops; +extern struct iommu_table_ops iommu_table_pseries_ops; + +/* + * IOMAP_MAX_ORDER defines the largest contiguous block + * of dma space we can get. IOMAP_MAX_ORDER = 13 + * allows up to 2**12 pages (4096 * 4096) = 16 MB + */ +#define IOMAP_MAX_ORDER 13 + +#define IOMMU_POOL_HASHBITS 2 +#define IOMMU_NR_POOLS (1 << IOMMU_POOL_HASHBITS) + +struct iommu_pool { + unsigned long start; + unsigned long end; + unsigned long hint; + spinlock_t lock; +} ____cacheline_aligned_in_smp; + +struct iommu_table { + unsigned long it_busno; /* Bus number this table belongs to */ + unsigned long it_size; /* Size of iommu table in entries */ + unsigned long it_indirect_levels; + unsigned long it_level_size; + unsigned long it_allocated_size; + unsigned long it_offset; /* Offset into global table */ + unsigned long it_base; /* mapped address of tce table */ + unsigned long it_index; /* which iommu table this is */ + unsigned long it_type; /* type: PCI or Virtual Bus */ + unsigned long it_blocksize; /* Entries in each block (cacheline) */ + unsigned long poolsize; + unsigned long nr_pools; + struct iommu_pool large_pool; + struct iommu_pool pools[IOMMU_NR_POOLS]; + unsigned long *it_map; /* A simple allocation bitmap for now */ + unsigned long it_page_shift;/* table iommu page size */ + struct list_head it_group_list;/* List of iommu_table_group_link */ + __be64 *it_userspace; /* userspace view of the table */ + struct iommu_table_ops *it_ops; + struct kref it_kref; + int it_nid; + unsigned long it_reserved_start; /* Start of not-DMA-able (MMIO) area */ + unsigned long it_reserved_end; +}; + +#define IOMMU_TABLE_USERSPACE_ENTRY_RO(tbl, entry) \ + ((tbl)->it_ops->useraddrptr((tbl), (entry), false)) +#define IOMMU_TABLE_USERSPACE_ENTRY(tbl, entry) \ + ((tbl)->it_ops->useraddrptr((tbl), (entry), true)) + +/* Pure 2^n version of get_order */ +static inline __attribute_const__ +int get_iommu_order(unsigned long size, struct iommu_table *tbl) +{ + return __ilog2((size - 1) >> tbl->it_page_shift) + 1; +} + + +struct scatterlist; + +#ifdef CONFIG_PPC64 + +static inline void set_iommu_table_base(struct device *dev, + struct iommu_table *base) +{ + dev->archdata.iommu_table_base = base; +} + +static inline void *get_iommu_table_base(struct device *dev) +{ + return dev->archdata.iommu_table_base; +} + +extern int dma_iommu_dma_supported(struct device *dev, u64 mask); + +extern struct iommu_table *iommu_tce_table_get(struct iommu_table *tbl); +extern int iommu_tce_table_put(struct iommu_table *tbl); + +/* Initializes an iommu_table based in values set in the passed-in + * structure + */ +extern struct iommu_table *iommu_init_table(struct iommu_table *tbl, + int nid, unsigned long res_start, unsigned long res_end); + +#define IOMMU_TABLE_GROUP_MAX_TABLES 2 + +struct iommu_table_group; + +struct iommu_table_group_ops { + unsigned long (*get_table_size)( + __u32 page_shift, + __u64 window_size, + __u32 levels); + long (*create_table)(struct iommu_table_group *table_group, + int num, + __u32 page_shift, + __u64 window_size, + __u32 levels, + struct iommu_table **ptbl); + long (*set_window)(struct iommu_table_group *table_group, + int num, + struct iommu_table *tblnew); + long (*unset_window)(struct iommu_table_group *table_group, + int num); + /* Switch ownership from platform code to external user (e.g. VFIO) */ + void (*take_ownership)(struct iommu_table_group *table_group); + /* Switch ownership from external user (e.g. VFIO) back to core */ + void (*release_ownership)(struct iommu_table_group *table_group); +}; + +struct iommu_table_group_link { + struct list_head next; + struct rcu_head rcu; + struct iommu_table_group *table_group; +}; + +struct iommu_table_group { + /* IOMMU properties */ + __u32 tce32_start; + __u32 tce32_size; + __u64 pgsizes; /* Bitmap of supported page sizes */ + __u32 max_dynamic_windows_supported; + __u32 max_levels; + + struct iommu_group *group; + struct iommu_table *tables[IOMMU_TABLE_GROUP_MAX_TABLES]; + struct iommu_table_group_ops *ops; +}; + +#ifdef CONFIG_IOMMU_API + +extern void iommu_register_group(struct iommu_table_group *table_group, + int pci_domain_number, unsigned long pe_num); +extern int iommu_add_device(struct iommu_table_group *table_group, + struct device *dev); +extern void iommu_del_device(struct device *dev); +extern long iommu_tce_xchg(struct mm_struct *mm, struct iommu_table *tbl, + unsigned long entry, unsigned long *hpa, + enum dma_data_direction *direction); +extern long iommu_tce_xchg_no_kill(struct mm_struct *mm, + struct iommu_table *tbl, + unsigned long entry, unsigned long *hpa, + enum dma_data_direction *direction); +extern void iommu_tce_kill(struct iommu_table *tbl, + unsigned long entry, unsigned long pages); +#else +static inline void iommu_register_group(struct iommu_table_group *table_group, + int pci_domain_number, + unsigned long pe_num) +{ +} + +static inline int iommu_add_device(struct iommu_table_group *table_group, + struct device *dev) +{ + return 0; +} + +static inline void iommu_del_device(struct device *dev) +{ +} +#endif /* !CONFIG_IOMMU_API */ + +u64 dma_iommu_get_required_mask(struct device *dev); +#else + +static inline void *get_iommu_table_base(struct device *dev) +{ + return NULL; +} + +static inline int dma_iommu_dma_supported(struct device *dev, u64 mask) +{ + return 0; +} + +#endif /* CONFIG_PPC64 */ + +extern int ppc_iommu_map_sg(struct device *dev, struct iommu_table *tbl, + struct scatterlist *sglist, int nelems, + unsigned long mask, + enum dma_data_direction direction, + unsigned long attrs); +extern void ppc_iommu_unmap_sg(struct iommu_table *tbl, + struct scatterlist *sglist, + int nelems, + enum dma_data_direction direction, + unsigned long attrs); + +extern void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl, + size_t size, dma_addr_t *dma_handle, + unsigned long mask, gfp_t flag, int node); +extern void iommu_free_coherent(struct iommu_table *tbl, size_t size, + void *vaddr, dma_addr_t dma_handle); +extern dma_addr_t iommu_map_page(struct device *dev, struct iommu_table *tbl, + struct page *page, unsigned long offset, + size_t size, unsigned long mask, + enum dma_data_direction direction, + unsigned long attrs); +extern void iommu_unmap_page(struct iommu_table *tbl, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction, + unsigned long attrs); + +extern void iommu_init_early_pSeries(void); +extern void iommu_init_early_dart(struct pci_controller_ops *controller_ops); +extern void iommu_init_early_pasemi(void); + +#if defined(CONFIG_PPC64) && defined(CONFIG_PM) +static inline void iommu_save(void) +{ + if (ppc_md.iommu_save) + ppc_md.iommu_save(); +} + +static inline void iommu_restore(void) +{ + if (ppc_md.iommu_restore) + ppc_md.iommu_restore(); +} +#endif + +/* The API to support IOMMU operations for VFIO */ +extern int iommu_tce_check_ioba(unsigned long page_shift, + unsigned long offset, unsigned long size, + unsigned long ioba, unsigned long npages); +extern int iommu_tce_check_gpa(unsigned long page_shift, + unsigned long gpa); + +#define iommu_tce_clear_param_check(tbl, ioba, tce_value, npages) \ + (iommu_tce_check_ioba((tbl)->it_page_shift, \ + (tbl)->it_offset, (tbl)->it_size, \ + (ioba), (npages)) || (tce_value)) +#define iommu_tce_put_param_check(tbl, ioba, gpa) \ + (iommu_tce_check_ioba((tbl)->it_page_shift, \ + (tbl)->it_offset, (tbl)->it_size, \ + (ioba), 1) || \ + iommu_tce_check_gpa((tbl)->it_page_shift, (gpa))) + +extern void iommu_flush_tce(struct iommu_table *tbl); +extern int iommu_take_ownership(struct iommu_table *tbl); +extern void iommu_release_ownership(struct iommu_table *tbl); + +extern enum dma_data_direction iommu_tce_direction(unsigned long tce); +extern unsigned long iommu_direction_to_tce_perm(enum dma_data_direction dir); + +#ifdef CONFIG_PPC_CELL_NATIVE +extern bool iommu_fixed_is_weak; +#else +#define iommu_fixed_is_weak false +#endif + +extern const struct dma_map_ops dma_iommu_ops; + +#endif /* __KERNEL__ */ +#endif /* _ASM_IOMMU_H */ diff --git a/arch/powerpc/include/asm/ipic.h b/arch/powerpc/include/asm/ipic.h new file mode 100644 index 000000000..0524df31a --- /dev/null +++ b/arch/powerpc/include/asm/ipic.h @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * IPIC external definitions and structure. + * + * Maintainer: Kumar Gala <galak@kernel.crashing.org> + * + * Copyright 2005 Freescale Semiconductor, Inc + */ +#ifdef __KERNEL__ +#ifndef __ASM_IPIC_H__ +#define __ASM_IPIC_H__ + +#include <linux/irq.h> + +/* Flags when we init the IPIC */ +#define IPIC_SPREADMODE_GRP_A 0x00000001 +#define IPIC_SPREADMODE_GRP_B 0x00000002 +#define IPIC_SPREADMODE_GRP_C 0x00000004 +#define IPIC_SPREADMODE_GRP_D 0x00000008 +#define IPIC_SPREADMODE_MIX_A 0x00000010 +#define IPIC_SPREADMODE_MIX_B 0x00000020 +#define IPIC_DISABLE_MCP_OUT 0x00000040 +#define IPIC_IRQ0_MCP 0x00000080 + +/* IPIC registers offsets */ +#define IPIC_SICFR 0x00 /* System Global Interrupt Configuration Register */ +#define IPIC_SIVCR 0x04 /* System Global Interrupt Vector Register */ +#define IPIC_SIPNR_H 0x08 /* System Internal Interrupt Pending Register (HIGH) */ +#define IPIC_SIPNR_L 0x0C /* System Internal Interrupt Pending Register (LOW) */ +#define IPIC_SIPRR_A 0x10 /* System Internal Interrupt group A Priority Register */ +#define IPIC_SIPRR_B 0x14 /* System Internal Interrupt group B Priority Register */ +#define IPIC_SIPRR_C 0x18 /* System Internal Interrupt group C Priority Register */ +#define IPIC_SIPRR_D 0x1C /* System Internal Interrupt group D Priority Register */ +#define IPIC_SIMSR_H 0x20 /* System Internal Interrupt Mask Register (HIGH) */ +#define IPIC_SIMSR_L 0x24 /* System Internal Interrupt Mask Register (LOW) */ +#define IPIC_SICNR 0x28 /* System Internal Interrupt Control Register */ +#define IPIC_SEPNR 0x2C /* System External Interrupt Pending Register */ +#define IPIC_SMPRR_A 0x30 /* System Mixed Interrupt group A Priority Register */ +#define IPIC_SMPRR_B 0x34 /* System Mixed Interrupt group B Priority Register */ +#define IPIC_SEMSR 0x38 /* System External Interrupt Mask Register */ +#define IPIC_SECNR 0x3C /* System External Interrupt Control Register */ +#define IPIC_SERSR 0x40 /* System Error Status Register */ +#define IPIC_SERMR 0x44 /* System Error Mask Register */ +#define IPIC_SERCR 0x48 /* System Error Control Register */ +#define IPIC_SIFCR_H 0x50 /* System Internal Interrupt Force Register (HIGH) */ +#define IPIC_SIFCR_L 0x54 /* System Internal Interrupt Force Register (LOW) */ +#define IPIC_SEFCR 0x58 /* System External Interrupt Force Register */ +#define IPIC_SERFR 0x5C /* System Error Force Register */ +#define IPIC_SCVCR 0x60 /* System Critical Interrupt Vector Register */ +#define IPIC_SMVCR 0x64 /* System Management Interrupt Vector Register */ + +enum ipic_prio_grp { + IPIC_INT_GRP_A = IPIC_SIPRR_A, + IPIC_INT_GRP_D = IPIC_SIPRR_D, + IPIC_MIX_GRP_A = IPIC_SMPRR_A, + IPIC_MIX_GRP_B = IPIC_SMPRR_B, +}; + +enum ipic_mcp_irq { + IPIC_MCP_IRQ0 = 0, + IPIC_MCP_WDT = 1, + IPIC_MCP_SBA = 2, + IPIC_MCP_PCI1 = 5, + IPIC_MCP_PCI2 = 6, + IPIC_MCP_MU = 7, +}; + +extern void ipic_set_default_priority(void); +extern u32 ipic_get_mcp_status(void); +extern void ipic_clear_mcp_status(u32 mask); + +extern struct ipic * ipic_init(struct device_node *node, unsigned int flags); +extern unsigned int ipic_get_irq(void); + +#endif /* __ASM_IPIC_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h new file mode 100644 index 000000000..4f983ca40 --- /dev/null +++ b/arch/powerpc/include/asm/irq.h @@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifdef __KERNEL__ +#ifndef _ASM_POWERPC_IRQ_H +#define _ASM_POWERPC_IRQ_H + +/* + */ + +#include <linux/irqdomain.h> +#include <linux/threads.h> +#include <linux/list.h> +#include <linux/radix-tree.h> + +#include <asm/types.h> +#include <linux/atomic.h> + + +extern atomic_t ppc_n_lost_interrupts; + +/* This number is used when no interrupt has been assigned */ +#define NO_IRQ (0) + +/* Total number of virq in the platform */ +#define NR_IRQS CONFIG_NR_IRQS + +/* Same thing, used by the generic IRQ code */ +#define NR_IRQS_LEGACY NUM_ISA_INTERRUPTS + +extern irq_hw_number_t virq_to_hw(unsigned int virq); + +static __inline__ int irq_canonicalize(int irq) +{ + return irq; +} + +extern int distribute_irqs; + +struct pt_regs; + +#define __ARCH_HAS_DO_SOFTIRQ + +#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) +/* + * Per-cpu stacks for handling critical, debug and machine check + * level interrupts. + */ +extern void *critirq_ctx[NR_CPUS]; +extern void *dbgirq_ctx[NR_CPUS]; +extern void *mcheckirq_ctx[NR_CPUS]; +#endif + +/* + * Per-cpu stacks for handling hard and soft interrupts. + */ +extern void *hardirq_ctx[NR_CPUS]; +extern void *softirq_ctx[NR_CPUS]; + +void call_do_softirq(void *sp); +void call_do_irq(struct pt_regs *regs, void *sp); +extern void do_IRQ(struct pt_regs *regs); +extern void __init init_IRQ(void); +extern void __do_irq(struct pt_regs *regs); + +int irq_choose_cpu(const struct cpumask *mask); + +#endif /* _ASM_IRQ_H */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/irq_work.h b/arch/powerpc/include/asm/irq_work.h new file mode 100644 index 000000000..b8b0be8f1 --- /dev/null +++ b/arch/powerpc/include/asm/irq_work.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_IRQ_WORK_H +#define _ASM_POWERPC_IRQ_WORK_H + +static inline bool arch_irq_work_has_interrupt(void) +{ + return true; +} +extern void arch_irq_work_raise(void); + +#endif /* _ASM_POWERPC_IRQ_WORK_H */ diff --git a/arch/powerpc/include/asm/irqflags.h b/arch/powerpc/include/asm/irqflags.h new file mode 100644 index 000000000..1a6c1ce17 --- /dev/null +++ b/arch/powerpc/include/asm/irqflags.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * IRQ flags handling + */ +#ifndef _ASM_IRQFLAGS_H +#define _ASM_IRQFLAGS_H + +#ifndef __ASSEMBLY__ +/* + * Get definitions for arch_local_save_flags(x), etc. + */ +#include <asm/hw_irq.h> + +#else +#ifdef CONFIG_TRACE_IRQFLAGS +#ifdef CONFIG_IRQSOFF_TRACER +/* + * Since the ftrace irqsoff latency trace checks CALLER_ADDR1, + * which is the stack frame here, we need to force a stack frame + * in case we came from user space. + */ +#define TRACE_WITH_FRAME_BUFFER(func) \ + mflr r0; \ + stdu r1, -STACK_FRAME_OVERHEAD(r1); \ + std r0, 16(r1); \ + stdu r1, -STACK_FRAME_OVERHEAD(r1); \ + bl func; \ + ld r1, 0(r1); \ + ld r1, 0(r1); +#else +#define TRACE_WITH_FRAME_BUFFER(func) \ + bl func; +#endif + +/* + * These are calls to C code, so the caller must be prepared for volatiles to + * be clobbered. + */ +#define TRACE_ENABLE_INTS TRACE_WITH_FRAME_BUFFER(trace_hardirqs_on) +#define TRACE_DISABLE_INTS TRACE_WITH_FRAME_BUFFER(trace_hardirqs_off) + +/* + * This is used by assembly code to soft-disable interrupts first and + * reconcile irq state. + * + * NB: This may call C code, so the caller must be prepared for volatiles to + * be clobbered. + */ +#define RECONCILE_IRQ_STATE(__rA, __rB) \ + lbz __rA,PACAIRQSOFTMASK(r13); \ + lbz __rB,PACAIRQHAPPENED(r13); \ + andi. __rA,__rA,IRQS_DISABLED; \ + li __rA,IRQS_DISABLED; \ + ori __rB,__rB,PACA_IRQ_HARD_DIS; \ + stb __rB,PACAIRQHAPPENED(r13); \ + bne 44f; \ + stb __rA,PACAIRQSOFTMASK(r13); \ + TRACE_DISABLE_INTS; \ +44: + +#else +#define TRACE_ENABLE_INTS +#define TRACE_DISABLE_INTS + +#define RECONCILE_IRQ_STATE(__rA, __rB) \ + lbz __rA,PACAIRQHAPPENED(r13); \ + li __rB,IRQS_DISABLED; \ + ori __rA,__rA,PACA_IRQ_HARD_DIS; \ + stb __rB,PACAIRQSOFTMASK(r13); \ + stb __rA,PACAIRQHAPPENED(r13) +#endif +#endif + +#endif diff --git a/arch/powerpc/include/asm/isa-bridge.h b/arch/powerpc/include/asm/isa-bridge.h new file mode 100644 index 000000000..47295894b --- /dev/null +++ b/arch/powerpc/include/asm/isa-bridge.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ISA_BRIDGE_H +#define __ISA_BRIDGE_H + +#ifdef CONFIG_PPC64 + +extern void isa_bridge_find_early(struct pci_controller *hose); +extern void isa_bridge_init_non_pci(struct device_node *np); + +static inline int isa_vaddr_is_ioport(void __iomem *address) +{ + /* Check if address hits the reserved legacy IO range */ + unsigned long ea = (unsigned long)address; + return ea >= ISA_IO_BASE && ea < ISA_IO_END; +} + +#else + +static inline int isa_vaddr_is_ioport(void __iomem *address) +{ + /* No specific ISA handling on ppc32 at this stage, it + * all goes through PCI + */ + return 0; +} + +#endif + +#endif /* __ISA_BRIDGE_H */ + diff --git a/arch/powerpc/include/asm/jump_label.h b/arch/powerpc/include/asm/jump_label.h new file mode 100644 index 000000000..09297ec9f --- /dev/null +++ b/arch/powerpc/include/asm/jump_label.h @@ -0,0 +1,66 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_JUMP_LABEL_H +#define _ASM_POWERPC_JUMP_LABEL_H + +/* + * Copyright 2010 Michael Ellerman, IBM Corp. + */ + +#ifndef __ASSEMBLY__ +#include <linux/types.h> + +#include <asm/feature-fixups.h> +#include <asm/asm-const.h> + +#define JUMP_ENTRY_TYPE stringify_in_c(FTR_ENTRY_LONG) +#define JUMP_LABEL_NOP_SIZE 4 + +static __always_inline bool arch_static_branch(struct static_key *key, bool branch) +{ + asm_volatile_goto("1:\n\t" + "nop # arch_static_branch\n\t" + ".pushsection __jump_table, \"aw\"\n\t" + JUMP_ENTRY_TYPE "1b, %l[l_yes], %c0\n\t" + ".popsection \n\t" + : : "i" (&((char *)key)[branch]) : : l_yes); + + return false; +l_yes: + return true; +} + +static __always_inline bool arch_static_branch_jump(struct static_key *key, bool branch) +{ + asm_volatile_goto("1:\n\t" + "b %l[l_yes] # arch_static_branch_jump\n\t" + ".pushsection __jump_table, \"aw\"\n\t" + JUMP_ENTRY_TYPE "1b, %l[l_yes], %c0\n\t" + ".popsection \n\t" + : : "i" (&((char *)key)[branch]) : : l_yes); + + return false; +l_yes: + return true; +} + +#ifdef CONFIG_PPC64 +typedef u64 jump_label_t; +#else +typedef u32 jump_label_t; +#endif + +struct jump_entry { + jump_label_t code; + jump_label_t target; + jump_label_t key; +}; + +#else +#define ARCH_STATIC_BRANCH(LABEL, KEY) \ +1098: nop; \ + .pushsection __jump_table, "aw"; \ + FTR_ENTRY_LONG 1098b, LABEL, KEY; \ + .popsection +#endif + +#endif /* _ASM_POWERPC_JUMP_LABEL_H */ diff --git a/arch/powerpc/include/asm/kasan.h b/arch/powerpc/include/asm/kasan.h new file mode 100644 index 000000000..7355ed05e --- /dev/null +++ b/arch/powerpc/include/asm/kasan.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_KASAN_H +#define __ASM_KASAN_H + +#ifdef CONFIG_KASAN +#define _GLOBAL_KASAN(fn) _GLOBAL(__##fn) +#define _GLOBAL_TOC_KASAN(fn) _GLOBAL_TOC(__##fn) +#define EXPORT_SYMBOL_KASAN(fn) EXPORT_SYMBOL(__##fn) +#else +#define _GLOBAL_KASAN(fn) _GLOBAL(fn) +#define _GLOBAL_TOC_KASAN(fn) _GLOBAL_TOC(fn) +#define EXPORT_SYMBOL_KASAN(fn) +#endif + +#ifndef __ASSEMBLY__ + +#include <asm/page.h> +#include <linux/sizes.h> + +#define KASAN_SHADOW_SCALE_SHIFT 3 + +#if defined(CONFIG_PPC_BOOK3S_32) && defined(CONFIG_MODULES) && defined(CONFIG_STRICT_KERNEL_RWX) +#define KASAN_KERN_START ALIGN_DOWN(PAGE_OFFSET - SZ_256M, SZ_256M) +#else +#define KASAN_KERN_START PAGE_OFFSET +#endif + +#define KASAN_SHADOW_START (KASAN_SHADOW_OFFSET + \ + (KASAN_KERN_START >> KASAN_SHADOW_SCALE_SHIFT)) + +#define KASAN_SHADOW_OFFSET ASM_CONST(CONFIG_KASAN_SHADOW_OFFSET) + +#define KASAN_SHADOW_END (-(-KASAN_SHADOW_START >> KASAN_SHADOW_SCALE_SHIFT)) + +#ifdef CONFIG_KASAN +void kasan_early_init(void); +void kasan_mmu_init(void); +void kasan_init(void); +void kasan_late_init(void); +#else +static inline void kasan_init(void) { } +static inline void kasan_mmu_init(void) { } +static inline void kasan_late_init(void) { } +#endif + +void kasan_update_early_region(unsigned long k_start, unsigned long k_end, pte_t pte); +int kasan_init_shadow_page_tables(unsigned long k_start, unsigned long k_end); +int kasan_init_region(void *start, size_t size); + +#endif /* __ASSEMBLY */ +#endif diff --git a/arch/powerpc/include/asm/kdebug.h b/arch/powerpc/include/asm/kdebug.h new file mode 100644 index 000000000..0f7c1ef37 --- /dev/null +++ b/arch/powerpc/include/asm/kdebug.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_KDEBUG_H +#define _ASM_POWERPC_KDEBUG_H +#ifdef __KERNEL__ + +/* Grossly misnamed. */ +enum die_val { + DIE_OOPS = 1, + DIE_IABR_MATCH, + DIE_DABR_MATCH, + DIE_BPT, + DIE_SSTEP, +}; + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_KDEBUG_H */ diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h new file mode 100644 index 000000000..fd128d1e5 --- /dev/null +++ b/arch/powerpc/include/asm/kdump.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _PPC64_KDUMP_H +#define _PPC64_KDUMP_H + +#include <asm/page.h> + +#define KDUMP_KERNELBASE 0x2000000 + +/* How many bytes to reserve at zero for kdump. The reserve limit should + * be greater or equal to the trampoline's end address. + * Reserve to the end of the FWNMI area, see head_64.S */ +#define KDUMP_RESERVE_LIMIT 0x10000 /* 64K */ + +#ifdef CONFIG_CRASH_DUMP + +/* + * On PPC64 translation is disabled during trampoline setup, so we use + * physical addresses. Though on PPC32 translation is already enabled, + * so we can't do the same. Luckily create_trampoline() creates relative + * branches, so we can just add the PAGE_OFFSET and don't worry about it. + */ +#ifdef __powerpc64__ +#define KDUMP_TRAMPOLINE_START 0x0100 +#define KDUMP_TRAMPOLINE_END 0x3000 +#else +#define KDUMP_TRAMPOLINE_START (0x0100 + PAGE_OFFSET) +#define KDUMP_TRAMPOLINE_END (0x3000 + PAGE_OFFSET) +#endif /* __powerpc64__ */ + +#define KDUMP_MIN_TCE_ENTRIES 2048 + +#endif /* CONFIG_CRASH_DUMP */ + +#ifndef __ASSEMBLY__ + +#if defined(CONFIG_CRASH_DUMP) && !defined(CONFIG_NONSTATIC_KERNEL) +extern void reserve_kdump_trampoline(void); +extern void setup_kdump_trampoline(void); +#else +/* !CRASH_DUMP || !NONSTATIC_KERNEL */ +static inline void reserve_kdump_trampoline(void) { ; } +static inline void setup_kdump_trampoline(void) { ; } +#endif + +#endif /* __ASSEMBLY__ */ + +#endif /* __PPC64_KDUMP_H */ diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h new file mode 100644 index 000000000..9ab344d29 --- /dev/null +++ b/arch/powerpc/include/asm/kexec.h @@ -0,0 +1,193 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_KEXEC_H +#define _ASM_POWERPC_KEXEC_H +#ifdef __KERNEL__ + +#if defined(CONFIG_FSL_BOOKE) || defined(CONFIG_44x) + +/* + * On FSL-BookE we setup a 1:1 mapping which covers the first 2GiB of memory + * and therefore we can only deal with memory within this range + */ +#define KEXEC_SOURCE_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL - 1) +#define KEXEC_DESTINATION_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL - 1) +#define KEXEC_CONTROL_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL - 1) + +#else + +/* + * Maximum page that is mapped directly into kernel memory. + * XXX: Since we copy virt we can use any page we allocate + */ +#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) + +/* + * Maximum address we can reach in physical address mode. + * XXX: I want to allow initrd in highmem. Otherwise set to rmo on LPAR. + */ +#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) + +/* Maximum address we can use for the control code buffer */ +#ifdef __powerpc64__ +#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL) +#else +/* TASK_SIZE, probably left over from use_mm ?? */ +#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE +#endif +#endif + +#define KEXEC_CONTROL_PAGE_SIZE 4096 + +/* The native architecture */ +#ifdef __powerpc64__ +#define KEXEC_ARCH KEXEC_ARCH_PPC64 +#else +#define KEXEC_ARCH KEXEC_ARCH_PPC +#endif + +#define KEXEC_STATE_NONE 0 +#define KEXEC_STATE_IRQS_OFF 1 +#define KEXEC_STATE_REAL_MODE 2 + +#ifndef __ASSEMBLY__ +#include <asm/reg.h> + +typedef void (*crash_shutdown_t)(void); + +#ifdef CONFIG_KEXEC_CORE + +/* + * This function is responsible for capturing register states if coming + * via panic or invoking dump using sysrq-trigger. + */ +static inline void crash_setup_regs(struct pt_regs *newregs, + struct pt_regs *oldregs) +{ + if (oldregs) + memcpy(newregs, oldregs, sizeof(*newregs)); + else + ppc_save_regs(newregs); +} + +extern void kexec_smp_wait(void); /* get and clear naca physid, wait for + master to copy new code to 0 */ +extern int crashing_cpu; +extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *)); +extern void crash_ipi_callback(struct pt_regs *); +extern int crash_wake_offline; + +struct kimage; +struct pt_regs; +extern void default_machine_kexec(struct kimage *image); +extern int default_machine_kexec_prepare(struct kimage *image); +extern void default_machine_crash_shutdown(struct pt_regs *regs); +extern int crash_shutdown_register(crash_shutdown_t handler); +extern int crash_shutdown_unregister(crash_shutdown_t handler); + +extern void crash_kexec_secondary(struct pt_regs *regs); +extern int overlaps_crashkernel(unsigned long start, unsigned long size); +extern void reserve_crashkernel(void); +extern void machine_kexec_mask_interrupts(void); + +static inline bool kdump_in_progress(void) +{ + return crashing_cpu >= 0; +} + +void relocate_new_kernel(unsigned long indirection_page, unsigned long reboot_code_buffer, + unsigned long start_address) __noreturn; + +#ifdef CONFIG_KEXEC_FILE +extern const struct kexec_file_ops kexec_elf64_ops; + +#define ARCH_HAS_KIMAGE_ARCH + +struct kimage_arch { + struct crash_mem *exclude_ranges; + + unsigned long backup_start; + void *backup_buf; + + unsigned long elfcorehdr_addr; + unsigned long elf_headers_sz; + void *elf_headers; + +#ifdef CONFIG_IMA_KEXEC + phys_addr_t ima_buffer_addr; + size_t ima_buffer_size; +#endif +}; + +char *setup_kdump_cmdline(struct kimage *image, char *cmdline, + unsigned long cmdline_len); +int setup_purgatory(struct kimage *image, const void *slave_code, + const void *fdt, unsigned long kernel_load_addr, + unsigned long fdt_load_addr); +int setup_new_fdt(const struct kimage *image, void *fdt, + unsigned long initrd_load_addr, unsigned long initrd_len, + const char *cmdline); +int delete_fdt_mem_rsv(void *fdt, unsigned long start, unsigned long size); + +#ifdef CONFIG_PPC64 +struct kexec_buf; + +int load_crashdump_segments_ppc64(struct kimage *image, + struct kexec_buf *kbuf); +int setup_purgatory_ppc64(struct kimage *image, const void *slave_code, + const void *fdt, unsigned long kernel_load_addr, + unsigned long fdt_load_addr); +unsigned int kexec_fdt_totalsize_ppc64(struct kimage *image); +int setup_new_fdt_ppc64(const struct kimage *image, void *fdt, + unsigned long initrd_load_addr, + unsigned long initrd_len, const char *cmdline); +#endif /* CONFIG_PPC64 */ + +#endif /* CONFIG_KEXEC_FILE */ + +#else /* !CONFIG_KEXEC_CORE */ +static inline void crash_kexec_secondary(struct pt_regs *regs) { } + +static inline int overlaps_crashkernel(unsigned long start, unsigned long size) +{ + return 0; +} + +static inline void reserve_crashkernel(void) { ; } + +static inline int crash_shutdown_register(crash_shutdown_t handler) +{ + return 0; +} + +static inline int crash_shutdown_unregister(crash_shutdown_t handler) +{ + return 0; +} + +static inline bool kdump_in_progress(void) +{ + return false; +} + +static inline void crash_ipi_callback(struct pt_regs *regs) { } + +static inline void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *)) +{ +} + +#endif /* CONFIG_KEXEC_CORE */ + +#ifdef CONFIG_PPC_BOOK3S_64 +#include <asm/book3s/64/kexec.h> +#endif + +#ifndef reset_sprs +#define reset_sprs reset_sprs +static inline void reset_sprs(void) +{ +} +#endif + +#endif /* ! __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_KEXEC_H */ diff --git a/arch/powerpc/include/asm/kexec_ranges.h b/arch/powerpc/include/asm/kexec_ranges.h new file mode 100644 index 000000000..7a90000f8 --- /dev/null +++ b/arch/powerpc/include/asm/kexec_ranges.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef _ASM_POWERPC_KEXEC_RANGES_H +#define _ASM_POWERPC_KEXEC_RANGES_H + +#define MEM_RANGE_CHUNK_SZ 2048 /* Memory ranges size chunk */ + +void sort_memory_ranges(struct crash_mem *mrngs, bool merge); +struct crash_mem *realloc_mem_ranges(struct crash_mem **mem_ranges); +int add_mem_range(struct crash_mem **mem_ranges, u64 base, u64 size); +int add_tce_mem_ranges(struct crash_mem **mem_ranges); +int add_initrd_mem_range(struct crash_mem **mem_ranges); +#ifdef CONFIG_PPC_BOOK3S_64 +int add_htab_mem_range(struct crash_mem **mem_ranges); +#else +static inline int add_htab_mem_range(struct crash_mem **mem_ranges) +{ + return 0; +} +#endif +int add_kernel_mem_range(struct crash_mem **mem_ranges); +int add_rtas_mem_range(struct crash_mem **mem_ranges); +int add_opal_mem_range(struct crash_mem **mem_ranges); +int add_reserved_mem_ranges(struct crash_mem **mem_ranges); + +#endif /* _ASM_POWERPC_KEXEC_RANGES_H */ diff --git a/arch/powerpc/include/asm/keylargo.h b/arch/powerpc/include/asm/keylargo.h new file mode 100644 index 000000000..debdf5480 --- /dev/null +++ b/arch/powerpc/include/asm/keylargo.h @@ -0,0 +1,262 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_KEYLARGO_H +#define _ASM_POWERPC_KEYLARGO_H +#ifdef __KERNEL__ +/* + * keylargo.h: definitions for using the "KeyLargo" I/O controller chip. + * + */ + +/* "Pangea" chipset has keylargo device-id 0x25 while core99 + * has device-id 0x22. The rev. of the pangea one is 0, so we + * fake an artificial rev. in keylargo_rev by oring 0x100 + */ +#define KL_PANGEA_REV 0x100 + +/* offset from base for feature control registers */ +#define KEYLARGO_MBCR 0x34 /* KL Only, Media bay control/status */ +#define KEYLARGO_FCR0 0x38 +#define KEYLARGO_FCR1 0x3c +#define KEYLARGO_FCR2 0x40 +#define KEYLARGO_FCR3 0x44 +#define KEYLARGO_FCR4 0x48 +#define KEYLARGO_FCR5 0x4c /* Pangea only */ + +/* K2 additional FCRs */ +#define K2_FCR6 0x34 +#define K2_FCR7 0x30 +#define K2_FCR8 0x2c +#define K2_FCR9 0x28 +#define K2_FCR10 0x24 + +/* GPIO registers */ +#define KEYLARGO_GPIO_LEVELS0 0x50 +#define KEYLARGO_GPIO_LEVELS1 0x54 +#define KEYLARGO_GPIO_EXTINT_0 0x58 +#define KEYLARGO_GPIO_EXTINT_CNT 18 +#define KEYLARGO_GPIO_0 0x6A +#define KEYLARGO_GPIO_CNT 17 +#define KEYLARGO_GPIO_EXTINT_DUAL_EDGE 0x80 +#define KEYLARGO_GPIO_OUTPUT_ENABLE 0x04 +#define KEYLARGO_GPIO_OUTOUT_DATA 0x01 +#define KEYLARGO_GPIO_INPUT_DATA 0x02 + +/* K2 does only extint GPIOs and does 51 of them */ +#define K2_GPIO_EXTINT_0 0x58 +#define K2_GPIO_EXTINT_CNT 51 + +/* Specific GPIO regs */ + +#define KL_GPIO_MODEM_RESET (KEYLARGO_GPIO_0+0x03) +#define KL_GPIO_MODEM_POWER (KEYLARGO_GPIO_0+0x02) /* Pangea */ + +#define KL_GPIO_SOUND_POWER (KEYLARGO_GPIO_0+0x05) + +/* Hrm... this one is only to be used on Pismo. It seems to also + * control the timebase enable on other machines. Still to be + * experimented... --BenH. + */ +#define KL_GPIO_FW_CABLE_POWER (KEYLARGO_GPIO_0+0x09) +#define KL_GPIO_TB_ENABLE (KEYLARGO_GPIO_0+0x09) + +#define KL_GPIO_ETH_PHY_RESET (KEYLARGO_GPIO_0+0x10) + +#define KL_GPIO_EXTINT_CPU1 (KEYLARGO_GPIO_0+0x0a) +#define KL_GPIO_EXTINT_CPU1_ASSERT 0x04 +#define KL_GPIO_EXTINT_CPU1_RELEASE 0x38 + +#define KL_GPIO_RESET_CPU0 (KEYLARGO_GPIO_EXTINT_0+0x03) +#define KL_GPIO_RESET_CPU1 (KEYLARGO_GPIO_EXTINT_0+0x04) +#define KL_GPIO_RESET_CPU2 (KEYLARGO_GPIO_EXTINT_0+0x0f) +#define KL_GPIO_RESET_CPU3 (KEYLARGO_GPIO_EXTINT_0+0x10) + +#define KL_GPIO_PMU_MESSAGE_IRQ (KEYLARGO_GPIO_EXTINT_0+0x09) +#define KL_GPIO_PMU_MESSAGE_BIT KEYLARGO_GPIO_INPUT_DATA + +#define KL_GPIO_MEDIABAY_IRQ (KEYLARGO_GPIO_EXTINT_0+0x0e) + +#define KL_GPIO_AIRPORT_0 (KEYLARGO_GPIO_EXTINT_0+0x0a) +#define KL_GPIO_AIRPORT_1 (KEYLARGO_GPIO_EXTINT_0+0x0d) +#define KL_GPIO_AIRPORT_2 (KEYLARGO_GPIO_0+0x0d) +#define KL_GPIO_AIRPORT_3 (KEYLARGO_GPIO_0+0x0e) +#define KL_GPIO_AIRPORT_4 (KEYLARGO_GPIO_0+0x0f) + +/* + * Bits in feature control register. Those bits different for K2 are + * listed separately + */ +#define KL_MBCR_MB0_PCI_ENABLE 0x00000800 /* exist ? */ +#define KL_MBCR_MB0_IDE_ENABLE 0x00001000 +#define KL_MBCR_MB0_FLOPPY_ENABLE 0x00002000 /* exist ? */ +#define KL_MBCR_MB0_SOUND_ENABLE 0x00004000 /* hrm... */ +#define KL_MBCR_MB0_DEV_MASK 0x00007800 +#define KL_MBCR_MB0_DEV_POWER 0x00000400 +#define KL_MBCR_MB0_DEV_RESET 0x00000200 +#define KL_MBCR_MB0_ENABLE 0x00000100 +#define KL_MBCR_MB1_PCI_ENABLE 0x08000000 /* exist ? */ +#define KL_MBCR_MB1_IDE_ENABLE 0x10000000 +#define KL_MBCR_MB1_FLOPPY_ENABLE 0x20000000 /* exist ? */ +#define KL_MBCR_MB1_SOUND_ENABLE 0x40000000 /* hrm... */ +#define KL_MBCR_MB1_DEV_MASK 0x78000000 +#define KL_MBCR_MB1_DEV_POWER 0x04000000 +#define KL_MBCR_MB1_DEV_RESET 0x02000000 +#define KL_MBCR_MB1_ENABLE 0x01000000 + +#define KL0_SCC_B_INTF_ENABLE 0x00000001 /* (KL Only) */ +#define KL0_SCC_A_INTF_ENABLE 0x00000002 +#define KL0_SCC_SLOWPCLK 0x00000004 +#define KL0_SCC_RESET 0x00000008 +#define KL0_SCCA_ENABLE 0x00000010 +#define KL0_SCCB_ENABLE 0x00000020 +#define KL0_SCC_CELL_ENABLE 0x00000040 +#define KL0_IRDA_HIGH_BAND 0x00000100 /* (KL Only) */ +#define KL0_IRDA_SOURCE2_SEL 0x00000200 /* (KL Only) */ +#define KL0_IRDA_SOURCE1_SEL 0x00000400 /* (KL Only) */ +#define KL0_PG_USB0_PMI_ENABLE 0x00000400 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_RESET 0x00000800 /* (KL Only) */ +#define KL0_PG_USB0_REF_SUSPEND_SEL 0x00000800 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_DEFAULT1 0x00001000 /* (KL Only) */ +#define KL0_PG_USB0_REF_SUSPEND 0x00001000 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_DEFAULT0 0x00002000 /* (KL Only) */ +#define KL0_PG_USB0_PAD_SUSPEND 0x00002000 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_FAST_CONNECT 0x00004000 /* (KL Only) */ +#define KL0_PG_USB1_PMI_ENABLE 0x00004000 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_ENABLE 0x00008000 /* (KL Only) */ +#define KL0_PG_USB1_REF_SUSPEND_SEL 0x00008000 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_CLK32_ENABLE 0x00010000 /* (KL Only) */ +#define KL0_PG_USB1_REF_SUSPEND 0x00010000 /* (Pangea/Intrepid Only) */ +#define KL0_IRDA_CLK19_ENABLE 0x00020000 /* (KL Only) */ +#define KL0_PG_USB1_PAD_SUSPEND 0x00020000 /* (Pangea/Intrepid Only) */ +#define KL0_USB0_PAD_SUSPEND0 0x00040000 +#define KL0_USB0_PAD_SUSPEND1 0x00080000 +#define KL0_USB0_CELL_ENABLE 0x00100000 +#define KL0_USB1_PAD_SUSPEND0 0x00400000 +#define KL0_USB1_PAD_SUSPEND1 0x00800000 +#define KL0_USB1_CELL_ENABLE 0x01000000 +#define KL0_USB_REF_SUSPEND 0x10000000 /* (KL Only) */ + +#define KL0_SERIAL_ENABLE (KL0_SCC_B_INTF_ENABLE | \ + KL0_SCC_SLOWPCLK | \ + KL0_SCC_CELL_ENABLE | KL0_SCCA_ENABLE) + +#define KL1_USB2_PMI_ENABLE 0x00000001 /* Intrepid only */ +#define KL1_AUDIO_SEL_22MCLK 0x00000002 /* KL/Pangea only */ +#define KL1_USB2_REF_SUSPEND_SEL 0x00000002 /* Intrepid only */ +#define KL1_USB2_REF_SUSPEND 0x00000004 /* Intrepid only */ +#define KL1_AUDIO_CLK_ENABLE_BIT 0x00000008 /* KL/Pangea only */ +#define KL1_USB2_PAD_SUSPEND_SEL 0x00000008 /* Intrepid only */ +#define KL1_USB2_PAD_SUSPEND0 0x00000010 /* Intrepid only */ +#define KL1_AUDIO_CLK_OUT_ENABLE 0x00000020 /* KL/Pangea only */ +#define KL1_USB2_PAD_SUSPEND1 0x00000020 /* Intrepid only */ +#define KL1_AUDIO_CELL_ENABLE 0x00000040 /* KL/Pangea only */ +#define KL1_USB2_CELL_ENABLE 0x00000040 /* Intrepid only */ +#define KL1_AUDIO_CHOOSE 0x00000080 /* KL/Pangea only */ +#define KL1_I2S0_CHOOSE 0x00000200 /* KL Only */ +#define KL1_I2S0_CELL_ENABLE 0x00000400 +#define KL1_I2S0_CLK_ENABLE_BIT 0x00001000 +#define KL1_I2S0_ENABLE 0x00002000 +#define KL1_I2S1_CELL_ENABLE 0x00020000 +#define KL1_I2S1_CLK_ENABLE_BIT 0x00080000 +#define KL1_I2S1_ENABLE 0x00100000 +#define KL1_EIDE0_ENABLE 0x00800000 /* KL/Intrepid Only */ +#define KL1_EIDE0_RESET_N 0x01000000 /* KL/Intrepid Only */ +#define KL1_EIDE1_ENABLE 0x04000000 /* KL Only */ +#define KL1_EIDE1_RESET_N 0x08000000 /* KL Only */ +#define KL1_UIDE_ENABLE 0x20000000 /* KL/Pangea Only */ +#define KL1_UIDE_RESET_N 0x40000000 /* KL/Pangea Only */ + +#define KL2_IOBUS_ENABLE 0x00000002 +#define KL2_SLEEP_STATE_BIT 0x00000100 /* KL Only */ +#define KL2_PG_STOP_ALL_CLOCKS 0x00000100 /* Pangea Only */ +#define KL2_MPIC_ENABLE 0x00020000 +#define KL2_CARDSLOT_RESET 0x00040000 /* Pangea/Intrepid Only */ +#define KL2_ALT_DATA_OUT 0x02000000 /* KL Only ??? */ +#define KL2_MEM_IS_BIG 0x04000000 +#define KL2_CARDSEL_16 0x08000000 + +#define KL3_SHUTDOWN_PLL_TOTAL 0x00000001 /* KL/Pangea only */ +#define KL3_SHUTDOWN_PLLKW6 0x00000002 /* KL/Pangea only */ +#define KL3_IT_SHUTDOWN_PLL3 0x00000002 /* Intrepid only */ +#define KL3_SHUTDOWN_PLLKW4 0x00000004 /* KL/Pangea only */ +#define KL3_IT_SHUTDOWN_PLL2 0x00000004 /* Intrepid only */ +#define KL3_SHUTDOWN_PLLKW35 0x00000008 /* KL/Pangea only */ +#define KL3_IT_SHUTDOWN_PLL1 0x00000008 /* Intrepid only */ +#define KL3_SHUTDOWN_PLLKW12 0x00000010 /* KL Only */ +#define KL3_IT_ENABLE_PLL3_SHUTDOWN 0x00000010 /* Intrepid only */ +#define KL3_PLL_RESET 0x00000020 /* KL/Pangea only */ +#define KL3_IT_ENABLE_PLL2_SHUTDOWN 0x00000020 /* Intrepid only */ +#define KL3_IT_ENABLE_PLL1_SHUTDOWN 0x00000010 /* Intrepid only */ +#define KL3_SHUTDOWN_PLL2X 0x00000080 /* KL Only */ +#define KL3_CLK66_ENABLE 0x00000100 /* KL Only */ +#define KL3_CLK49_ENABLE 0x00000200 +#define KL3_CLK45_ENABLE 0x00000400 +#define KL3_CLK31_ENABLE 0x00000800 /* KL/Pangea only */ +#define KL3_TIMER_CLK18_ENABLE 0x00001000 +#define KL3_I2S1_CLK18_ENABLE 0x00002000 +#define KL3_I2S0_CLK18_ENABLE 0x00004000 +#define KL3_VIA_CLK16_ENABLE 0x00008000 /* KL/Pangea only */ +#define KL3_IT_VIA_CLK32_ENABLE 0x00008000 /* Intrepid only */ +#define KL3_STOPPING33_ENABLED 0x00080000 /* KL Only */ +#define KL3_PG_PLL_ENABLE_TEST 0x00080000 /* Pangea Only */ + +/* Intrepid USB bus 2, port 0,1 */ +#define KL3_IT_PORT_WAKEUP_ENABLE(p) (0x00080000 << ((p)<<3)) +#define KL3_IT_PORT_RESUME_WAKE_EN(p) (0x00040000 << ((p)<<3)) +#define KL3_IT_PORT_CONNECT_WAKE_EN(p) (0x00020000 << ((p)<<3)) +#define KL3_IT_PORT_DISCONNECT_WAKE_EN(p) (0x00010000 << ((p)<<3)) +#define KL3_IT_PORT_RESUME_STAT(p) (0x00300000 << ((p)<<3)) +#define KL3_IT_PORT_CONNECT_STAT(p) (0x00200000 << ((p)<<3)) +#define KL3_IT_PORT_DISCONNECT_STAT(p) (0x00100000 << ((p)<<3)) + +/* Port 0,1 : bus 0, port 2,3 : bus 1 */ +#define KL4_PORT_WAKEUP_ENABLE(p) (0x00000008 << ((p)<<3)) +#define KL4_PORT_RESUME_WAKE_EN(p) (0x00000004 << ((p)<<3)) +#define KL4_PORT_CONNECT_WAKE_EN(p) (0x00000002 << ((p)<<3)) +#define KL4_PORT_DISCONNECT_WAKE_EN(p) (0x00000001 << ((p)<<3)) +#define KL4_PORT_RESUME_STAT(p) (0x00000040 << ((p)<<3)) +#define KL4_PORT_CONNECT_STAT(p) (0x00000020 << ((p)<<3)) +#define KL4_PORT_DISCONNECT_STAT(p) (0x00000010 << ((p)<<3)) + +/* Pangea and Intrepid only */ +#define KL5_VIA_USE_CLK31 0000000001 /* Pangea Only */ +#define KL5_SCC_USE_CLK31 0x00000002 /* Pangea Only */ +#define KL5_PWM_CLK32_EN 0x00000004 +#define KL5_CLK3_68_EN 0x00000010 +#define KL5_CLK32_EN 0x00000020 + + +/* K2 definitions */ +#define K2_FCR0_USB0_SWRESET 0x00200000 +#define K2_FCR0_USB1_SWRESET 0x02000000 +#define K2_FCR0_RING_PME_DISABLE 0x08000000 + +#define K2_FCR1_PCI1_BUS_RESET_N 0x00000010 +#define K2_FCR1_PCI1_SLEEP_RESET_EN 0x00000020 +#define K2_FCR1_I2S0_CELL_ENABLE 0x00000400 +#define K2_FCR1_I2S0_RESET 0x00000800 +#define K2_FCR1_I2S0_CLK_ENABLE_BIT 0x00001000 +#define K2_FCR1_I2S0_ENABLE 0x00002000 +#define K2_FCR1_PCI1_CLK_ENABLE 0x00004000 +#define K2_FCR1_FW_CLK_ENABLE 0x00008000 +#define K2_FCR1_FW_RESET_N 0x00010000 +#define K2_FCR1_I2S1_CELL_ENABLE 0x00020000 +#define K2_FCR1_I2S1_CLK_ENABLE_BIT 0x00080000 +#define K2_FCR1_I2S1_ENABLE 0x00100000 +#define K2_FCR1_GMAC_CLK_ENABLE 0x00400000 +#define K2_FCR1_GMAC_POWER_DOWN 0x00800000 +#define K2_FCR1_GMAC_RESET_N 0x01000000 +#define K2_FCR1_SATA_CLK_ENABLE 0x02000000 +#define K2_FCR1_SATA_POWER_DOWN 0x04000000 +#define K2_FCR1_SATA_RESET_N 0x08000000 +#define K2_FCR1_UATA_CLK_ENABLE 0x10000000 +#define K2_FCR1_UATA_RESET_N 0x40000000 +#define K2_FCR1_UATA_CHOOSE_CLK66 0x80000000 + +/* Shasta definitions */ +#define SH_FCR1_I2S2_CELL_ENABLE 0x00000010 +#define SH_FCR1_I2S2_CLK_ENABLE_BIT 0x00000040 +#define SH_FCR1_I2S2_ENABLE 0x00000080 +#define SH_FCR3_I2S2_CLK18_ENABLE 0x00008000 + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_KEYLARGO_H */ diff --git a/arch/powerpc/include/asm/kgdb.h b/arch/powerpc/include/asm/kgdb.h new file mode 100644 index 000000000..a9e098a3b --- /dev/null +++ b/arch/powerpc/include/asm/kgdb.h @@ -0,0 +1,67 @@ +/* + * The PowerPC (32/64) specific defines / externs for KGDB. Based on + * the previous 32bit and 64bit specific files, which had the following + * copyrights: + * + * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com) + * PPC Mods (C) 2004 Tom Rini (trini@mvista.com) + * PPC Mods (C) 2003 John Whitney (john.whitney@timesys.com) + * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu) + * + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Author: Tom Rini <trini@kernel.crashing.org> + * + * 2006 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifdef __KERNEL__ +#ifndef __POWERPC_KGDB_H__ +#define __POWERPC_KGDB_H__ + +#ifndef __ASSEMBLY__ + +#define BREAK_INSTR_SIZE 4 +#define BUFMAX ((NUMREGBYTES * 2) + 512) +#define OUTBUFMAX ((NUMREGBYTES * 2) + 512) + +#define BREAK_INSTR 0x7d821008 /* twge r2, r2 */ + +static inline void arch_kgdb_breakpoint(void) +{ + asm(stringify_in_c(.long BREAK_INSTR)); +} +#define CACHE_FLUSH_IS_SAFE 1 +#define DBG_MAX_REG_NUM 70 + +/* The number bytes of registers we have to save depends on a few + * things. For 64bit we default to not including vector registers and + * vector state registers. */ +#ifdef CONFIG_PPC64 +/* + * 64 bit (8 byte) registers: + * 32 gpr, 32 fpr, nip, msr, link, ctr + * 32 bit (4 byte) registers: + * ccr, xer, fpscr + */ +#define NUMREGBYTES ((68 * 8) + (3 * 4)) +#define NUMCRITREGBYTES 184 +#else /* CONFIG_PPC32 */ +/* On non-E500 family PPC32 we determine the size by picking the last + * register we need, but on E500 we skip sections so we list what we + * need to store, and add it up. */ +#ifndef CONFIG_E500 +#define MAXREG (PT_FPSCR+1) +#else +/* 32 GPRs (8 bytes), nip, msr, ccr, link, ctr, xer, acc (8 bytes), spefscr*/ +#define MAXREG ((32*2)+6+2+1) +#endif +#define NUMREGBYTES (MAXREG * sizeof(int)) +/* CR/LR, R1, R2, R13-R31 inclusive. */ +#define NUMCRITREGBYTES (23 * sizeof(int)) +#endif /* 32/64 */ +#endif /* !(__ASSEMBLY__) */ +#endif /* !__POWERPC_KGDB_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/kmap_types.h b/arch/powerpc/include/asm/kmap_types.h new file mode 100644 index 000000000..c8fa182d4 --- /dev/null +++ b/arch/powerpc/include/asm/kmap_types.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_KMAP_TYPES_H +#define _ASM_POWERPC_KMAP_TYPES_H + +#ifdef __KERNEL__ + +/* + */ + +#define KM_TYPE_NR 16 + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_KMAP_TYPES_H */ diff --git a/arch/powerpc/include/asm/kprobes.h b/arch/powerpc/include/asm/kprobes.h new file mode 100644 index 000000000..4fc0e15e2 --- /dev/null +++ b/arch/powerpc/include/asm/kprobes.h @@ -0,0 +1,97 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_KPROBES_H +#define _ASM_POWERPC_KPROBES_H + +#include <asm-generic/kprobes.h> + +#ifdef __KERNEL__ +/* + * Kernel Probes (KProbes) + * + * Copyright (C) IBM Corporation, 2002, 2004 + * + * 2002-Oct Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel + * Probes initial implementation ( includes suggestions from + * Rusty Russell). + * 2004-Nov Modified for PPC64 by Ananth N Mavinakayanahalli + * <ananth@in.ibm.com> + */ +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/percpu.h> +#include <linux/module.h> +#include <asm/probes.h> +#include <asm/code-patching.h> + +#ifdef CONFIG_KPROBES +#define __ARCH_WANT_KPROBES_INSN_SLOT + +struct pt_regs; +struct kprobe; + +typedef ppc_opcode_t kprobe_opcode_t; + +extern kprobe_opcode_t optinsn_slot; + +/* Optinsn template address */ +extern kprobe_opcode_t optprobe_template_entry[]; +extern kprobe_opcode_t optprobe_template_op_address[]; +extern kprobe_opcode_t optprobe_template_call_handler[]; +extern kprobe_opcode_t optprobe_template_insn[]; +extern kprobe_opcode_t optprobe_template_call_emulate[]; +extern kprobe_opcode_t optprobe_template_ret[]; +extern kprobe_opcode_t optprobe_template_end[]; + +/* Fixed instruction size for powerpc */ +#define MAX_INSN_SIZE 2 +#define MAX_OPTIMIZED_LENGTH sizeof(kprobe_opcode_t) /* 4 bytes */ +#define MAX_OPTINSN_SIZE (optprobe_template_end - optprobe_template_entry) +#define RELATIVEJUMP_SIZE sizeof(kprobe_opcode_t) /* 4 bytes */ + +#define flush_insn_slot(p) do { } while (0) +#define kretprobe_blacklist_size 0 + +void kretprobe_trampoline(void); +extern void arch_remove_kprobe(struct kprobe *p); + +/* Architecture specific copy of original instruction */ +struct arch_specific_insn { + /* copy of original instruction */ + kprobe_opcode_t *insn; + /* + * Set in kprobes code, initially to 0. If the instruction can be + * eumulated, this is set to 1, if not, to -1. + */ + int boostable; +}; + +struct prev_kprobe { + struct kprobe *kp; + unsigned long status; + unsigned long saved_msr; +}; + +/* per-cpu kprobe control block */ +struct kprobe_ctlblk { + unsigned long kprobe_status; + unsigned long kprobe_saved_msr; + struct prev_kprobe prev_kprobe; +}; + +struct arch_optimized_insn { + kprobe_opcode_t copied_insn[1]; + /* detour buffer */ + kprobe_opcode_t *insn; +}; + +extern int kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data); +extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr); +extern int kprobe_handler(struct pt_regs *regs); +extern int kprobe_post_handler(struct pt_regs *regs); +#else +static inline int kprobe_handler(struct pt_regs *regs) { return 0; } +static inline int kprobe_post_handler(struct pt_regs *regs) { return 0; } +#endif /* CONFIG_KPROBES */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_KPROBES_H */ diff --git a/arch/powerpc/include/asm/kup.h b/arch/powerpc/include/asm/kup.h new file mode 100644 index 000000000..0d93331d0 --- /dev/null +++ b/arch/powerpc/include/asm/kup.h @@ -0,0 +1,132 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_KUP_H_ +#define _ASM_POWERPC_KUP_H_ + +#define KUAP_READ 1 +#define KUAP_WRITE 2 +#define KUAP_READ_WRITE (KUAP_READ | KUAP_WRITE) +/* + * For prevent_user_access() only. + * Use the current saved situation instead of the to/from/size params. + * Used on book3s/32 + */ +#define KUAP_CURRENT_READ 4 +#define KUAP_CURRENT_WRITE 8 +#define KUAP_CURRENT (KUAP_CURRENT_READ | KUAP_CURRENT_WRITE) + +#ifdef CONFIG_PPC_BOOK3S_64 +#include <asm/book3s/64/kup-radix.h> +#endif +#ifdef CONFIG_PPC_8xx +#include <asm/nohash/32/kup-8xx.h> +#endif +#ifdef CONFIG_PPC_BOOK3S_32 +#include <asm/book3s/32/kup.h> +#endif + +#ifdef __ASSEMBLY__ +#ifndef CONFIG_PPC_KUAP +.macro kuap_save_and_lock sp, thread, gpr1, gpr2, gpr3 +.endm + +.macro kuap_restore sp, current, gpr1, gpr2, gpr3 +.endm + +.macro kuap_check current, gpr +.endm + +.macro kuap_check_amr gpr1, gpr2 +.endm + +#endif + +#else /* !__ASSEMBLY__ */ + +#include <linux/pgtable.h> + +void setup_kup(void); + +#ifdef CONFIG_PPC_KUEP +void setup_kuep(bool disabled); +#else +static inline void setup_kuep(bool disabled) { } +#endif /* CONFIG_PPC_KUEP */ + +#ifdef CONFIG_PPC_KUAP +void setup_kuap(bool disabled); +#else +static inline void setup_kuap(bool disabled) { } + +static inline bool +bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write) +{ + return false; +} + +static inline void kuap_check_amr(void) { } + +/* + * book3s/64/kup-radix.h defines these functions for the !KUAP case to flush + * the L1D cache after user accesses. Only include the empty stubs for other + * platforms. + */ +#ifndef CONFIG_PPC_BOOK3S_64 +static inline void allow_user_access(void __user *to, const void __user *from, + unsigned long size, unsigned long dir) { } +static inline void prevent_user_access(void __user *to, const void __user *from, + unsigned long size, unsigned long dir) { } +static inline unsigned long prevent_user_access_return(void) { return 0UL; } +static inline void restore_user_access(unsigned long flags) { } +#endif /* CONFIG_PPC_BOOK3S_64 */ +#endif /* CONFIG_PPC_KUAP */ + +static inline void allow_read_from_user(const void __user *from, unsigned long size) +{ + allow_user_access(NULL, from, size, KUAP_READ); +} + +static inline void allow_write_to_user(void __user *to, unsigned long size) +{ + allow_user_access(to, NULL, size, KUAP_WRITE); +} + +static inline void allow_read_write_user(void __user *to, const void __user *from, + unsigned long size) +{ + allow_user_access(to, from, size, KUAP_READ_WRITE); +} + +static inline void prevent_read_from_user(const void __user *from, unsigned long size) +{ + prevent_user_access(NULL, from, size, KUAP_READ); +} + +static inline void prevent_write_to_user(void __user *to, unsigned long size) +{ + prevent_user_access(to, NULL, size, KUAP_WRITE); +} + +static inline void prevent_read_write_user(void __user *to, const void __user *from, + unsigned long size) +{ + prevent_user_access(to, from, size, KUAP_READ_WRITE); +} + +static inline void prevent_current_access_user(void) +{ + prevent_user_access(NULL, NULL, ~0UL, KUAP_CURRENT); +} + +static inline void prevent_current_read_from_user(void) +{ + prevent_user_access(NULL, NULL, ~0UL, KUAP_CURRENT_READ); +} + +static inline void prevent_current_write_to_user(void) +{ + prevent_user_access(NULL, NULL, ~0UL, KUAP_CURRENT_WRITE); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_KUAP_H_ */ diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h new file mode 100644 index 000000000..a36335604 --- /dev/null +++ b/arch/powerpc/include/asm/kvm_asm.h @@ -0,0 +1,156 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * + * Copyright IBM Corp. 2008 + * + * Authors: Hollis Blanchard <hollisb@us.ibm.com> + */ + +#ifndef __POWERPC_KVM_ASM_H__ +#define __POWERPC_KVM_ASM_H__ + +#ifdef __ASSEMBLY__ +#ifdef CONFIG_64BIT +#define PPC_STD(sreg, offset, areg) std sreg, (offset)(areg) +#define PPC_LD(treg, offset, areg) ld treg, (offset)(areg) +#else +#define PPC_STD(sreg, offset, areg) stw sreg, (offset+4)(areg) +#define PPC_LD(treg, offset, areg) lwz treg, (offset+4)(areg) +#endif +#endif + +/* IVPR must be 64KiB-aligned. */ +#define VCPU_SIZE_ORDER 4 +#define VCPU_SIZE_LOG (VCPU_SIZE_ORDER + 12) +#define VCPU_SIZE_BYTES (1<<VCPU_SIZE_LOG) + +#define BOOKE_INTERRUPT_CRITICAL 0 +#define BOOKE_INTERRUPT_MACHINE_CHECK 1 +#define BOOKE_INTERRUPT_DATA_STORAGE 2 +#define BOOKE_INTERRUPT_INST_STORAGE 3 +#define BOOKE_INTERRUPT_EXTERNAL 4 +#define BOOKE_INTERRUPT_ALIGNMENT 5 +#define BOOKE_INTERRUPT_PROGRAM 6 +#define BOOKE_INTERRUPT_FP_UNAVAIL 7 +#define BOOKE_INTERRUPT_SYSCALL 8 +#define BOOKE_INTERRUPT_AP_UNAVAIL 9 +#define BOOKE_INTERRUPT_DECREMENTER 10 +#define BOOKE_INTERRUPT_FIT 11 +#define BOOKE_INTERRUPT_WATCHDOG 12 +#define BOOKE_INTERRUPT_DTLB_MISS 13 +#define BOOKE_INTERRUPT_ITLB_MISS 14 +#define BOOKE_INTERRUPT_DEBUG 15 + +/* E500 */ +#ifdef CONFIG_SPE_POSSIBLE +#define BOOKE_INTERRUPT_SPE_UNAVAIL 32 +#define BOOKE_INTERRUPT_SPE_FP_DATA 33 +#define BOOKE_INTERRUPT_SPE_FP_ROUND 34 +#endif + +#ifdef CONFIG_PPC_E500MC +#define BOOKE_INTERRUPT_ALTIVEC_UNAVAIL 32 +#define BOOKE_INTERRUPT_ALTIVEC_ASSIST 33 +#endif + +#define BOOKE_INTERRUPT_PERFORMANCE_MONITOR 35 +#define BOOKE_INTERRUPT_DOORBELL 36 +#define BOOKE_INTERRUPT_DOORBELL_CRITICAL 37 + +/* booke_hv */ +#define BOOKE_INTERRUPT_GUEST_DBELL 38 +#define BOOKE_INTERRUPT_GUEST_DBELL_CRIT 39 +#define BOOKE_INTERRUPT_HV_SYSCALL 40 +#define BOOKE_INTERRUPT_HV_PRIV 41 +#define BOOKE_INTERRUPT_LRAT_ERROR 42 + +/* book3s */ + +#define BOOK3S_INTERRUPT_SYSTEM_RESET 0x100 +#define BOOK3S_INTERRUPT_MACHINE_CHECK 0x200 +#define BOOK3S_INTERRUPT_DATA_STORAGE 0x300 +#define BOOK3S_INTERRUPT_DATA_SEGMENT 0x380 +#define BOOK3S_INTERRUPT_INST_STORAGE 0x400 +#define BOOK3S_INTERRUPT_INST_SEGMENT 0x480 +#define BOOK3S_INTERRUPT_EXTERNAL 0x500 +#define BOOK3S_INTERRUPT_EXTERNAL_HV 0x502 +#define BOOK3S_INTERRUPT_ALIGNMENT 0x600 +#define BOOK3S_INTERRUPT_PROGRAM 0x700 +#define BOOK3S_INTERRUPT_FP_UNAVAIL 0x800 +#define BOOK3S_INTERRUPT_DECREMENTER 0x900 +#define BOOK3S_INTERRUPT_HV_DECREMENTER 0x980 +#define BOOK3S_INTERRUPT_DOORBELL 0xa00 +#define BOOK3S_INTERRUPT_SYSCALL 0xc00 +#define BOOK3S_INTERRUPT_TRACE 0xd00 +#define BOOK3S_INTERRUPT_H_DATA_STORAGE 0xe00 +#define BOOK3S_INTERRUPT_H_INST_STORAGE 0xe20 +#define BOOK3S_INTERRUPT_H_EMUL_ASSIST 0xe40 +#define BOOK3S_INTERRUPT_HMI 0xe60 +#define BOOK3S_INTERRUPT_H_DOORBELL 0xe80 +#define BOOK3S_INTERRUPT_H_VIRT 0xea0 +#define BOOK3S_INTERRUPT_PERFMON 0xf00 +#define BOOK3S_INTERRUPT_ALTIVEC 0xf20 +#define BOOK3S_INTERRUPT_VSX 0xf40 +#define BOOK3S_INTERRUPT_FAC_UNAVAIL 0xf60 +#define BOOK3S_INTERRUPT_H_FAC_UNAVAIL 0xf80 + +/* book3s_hv */ + +#define BOOK3S_INTERRUPT_HV_SOFTPATCH 0x1500 + +/* + * Special trap used to indicate to host that this is a + * passthrough interrupt that could not be handled + * completely in the guest. + */ +#define BOOK3S_INTERRUPT_HV_RM_HARD 0x5555 + +#define BOOK3S_IRQPRIO_SYSTEM_RESET 0 +#define BOOK3S_IRQPRIO_DATA_SEGMENT 1 +#define BOOK3S_IRQPRIO_INST_SEGMENT 2 +#define BOOK3S_IRQPRIO_DATA_STORAGE 3 +#define BOOK3S_IRQPRIO_INST_STORAGE 4 +#define BOOK3S_IRQPRIO_ALIGNMENT 5 +#define BOOK3S_IRQPRIO_PROGRAM 6 +#define BOOK3S_IRQPRIO_FP_UNAVAIL 7 +#define BOOK3S_IRQPRIO_ALTIVEC 8 +#define BOOK3S_IRQPRIO_VSX 9 +#define BOOK3S_IRQPRIO_FAC_UNAVAIL 10 +#define BOOK3S_IRQPRIO_SYSCALL 11 +#define BOOK3S_IRQPRIO_MACHINE_CHECK 12 +#define BOOK3S_IRQPRIO_DEBUG 13 +#define BOOK3S_IRQPRIO_EXTERNAL 14 +#define BOOK3S_IRQPRIO_DECREMENTER 15 +#define BOOK3S_IRQPRIO_PERFORMANCE_MONITOR 16 +#define BOOK3S_IRQPRIO_MAX 17 + +#define BOOK3S_HFLAG_DCBZ32 0x1 +#define BOOK3S_HFLAG_SLB 0x2 +#define BOOK3S_HFLAG_PAIRED_SINGLE 0x4 +#define BOOK3S_HFLAG_NATIVE_PS 0x8 +#define BOOK3S_HFLAG_MULTI_PGSIZE 0x10 +#define BOOK3S_HFLAG_NEW_TLBIE 0x20 +#define BOOK3S_HFLAG_SPLIT_HACK 0x40 + +#define RESUME_FLAG_NV (1<<0) /* Reload guest nonvolatile state? */ +#define RESUME_FLAG_HOST (1<<1) /* Resume host? */ +#define RESUME_FLAG_ARCH1 (1<<2) +#define RESUME_FLAG_ARCH2 (1<<3) + +#define RESUME_GUEST 0 +#define RESUME_GUEST_NV RESUME_FLAG_NV +#define RESUME_HOST RESUME_FLAG_HOST +#define RESUME_HOST_NV (RESUME_FLAG_HOST|RESUME_FLAG_NV) + +#define KVM_GUEST_MODE_NONE 0 +#define KVM_GUEST_MODE_GUEST 1 +#define KVM_GUEST_MODE_SKIP 2 +#define KVM_GUEST_MODE_GUEST_HV 3 +#define KVM_GUEST_MODE_HOST_HV 4 + +#define KVM_INST_FETCH_FAILED -1 + +/* Extract PO and XOP opcode fields */ +#define PO_XOP_OPCODE_MASK 0xfc0007fe + +#endif /* __POWERPC_KVM_ASM_H__ */ diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h new file mode 100644 index 000000000..d32ec9ae7 --- /dev/null +++ b/arch/powerpc/include/asm/kvm_book3s.h @@ -0,0 +1,471 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * + * Copyright SUSE Linux Products GmbH 2009 + * + * Authors: Alexander Graf <agraf@suse.de> + */ + +#ifndef __ASM_KVM_BOOK3S_H__ +#define __ASM_KVM_BOOK3S_H__ + +#include <linux/types.h> +#include <linux/kvm_host.h> +#include <asm/kvm_book3s_asm.h> + +struct kvmppc_bat { + u64 raw; + u32 bepi; + u32 bepi_mask; + u32 brpn; + u8 wimg; + u8 pp; + bool vs : 1; + bool vp : 1; +}; + +struct kvmppc_sid_map { + u64 guest_vsid; + u64 guest_esid; + u64 host_vsid; + bool valid : 1; +}; + +#define SID_MAP_BITS 9 +#define SID_MAP_NUM (1 << SID_MAP_BITS) +#define SID_MAP_MASK (SID_MAP_NUM - 1) + +#ifdef CONFIG_PPC_BOOK3S_64 +#define SID_CONTEXTS 1 +#else +#define SID_CONTEXTS 128 +#define VSID_POOL_SIZE (SID_CONTEXTS * 16) +#endif + +struct hpte_cache { + struct hlist_node list_pte; + struct hlist_node list_pte_long; + struct hlist_node list_vpte; + struct hlist_node list_vpte_long; +#ifdef CONFIG_PPC_BOOK3S_64 + struct hlist_node list_vpte_64k; +#endif + struct rcu_head rcu_head; + u64 host_vpn; + u64 pfn; + ulong slot; + struct kvmppc_pte pte; + int pagesize; +}; + +/* + * Struct for a virtual core. + * Note: entry_exit_map combines a bitmap of threads that have entered + * in the bottom 8 bits and a bitmap of threads that have exited in the + * next 8 bits. This is so that we can atomically set the entry bit + * iff the exit map is 0 without taking a lock. + */ +struct kvmppc_vcore { + int n_runnable; + int num_threads; + int entry_exit_map; + int napping_threads; + int first_vcpuid; + u16 pcpu; + u16 last_cpu; + u8 vcore_state; + u8 in_guest; + struct kvm_vcpu *runnable_threads[MAX_SMT_THREADS]; + struct list_head preempt_list; + spinlock_t lock; + struct rcuwait wait; + spinlock_t stoltb_lock; /* protects stolen_tb and preempt_tb */ + u64 stolen_tb; + u64 preempt_tb; + struct kvm_vcpu *runner; + struct kvm *kvm; + u64 tb_offset; /* guest timebase - host timebase */ + u64 tb_offset_applied; /* timebase offset currently in force */ + ulong lpcr; + u32 arch_compat; + ulong pcr; + ulong dpdes; /* doorbell state (POWER8) */ + ulong vtb; /* virtual timebase */ + ulong conferring_threads; + unsigned int halt_poll_ns; + atomic_t online_count; +}; + +struct kvmppc_vcpu_book3s { + struct kvmppc_sid_map sid_map[SID_MAP_NUM]; + struct { + u64 esid; + u64 vsid; + } slb_shadow[64]; + u8 slb_shadow_max; + struct kvmppc_bat ibat[8]; + struct kvmppc_bat dbat[8]; + u64 hid[6]; + u64 gqr[8]; + u64 sdr1; + u64 hior; + u64 msr_mask; + u64 vtb; +#ifdef CONFIG_PPC_BOOK3S_32 + u32 vsid_pool[VSID_POOL_SIZE]; + u32 vsid_next; +#else + u64 proto_vsid_first; + u64 proto_vsid_max; + u64 proto_vsid_next; +#endif + int context_id[SID_CONTEXTS]; + + bool hior_explicit; /* HIOR is set by ioctl, not PVR */ + + struct hlist_head hpte_hash_pte[HPTEG_HASH_NUM_PTE]; + struct hlist_head hpte_hash_pte_long[HPTEG_HASH_NUM_PTE_LONG]; + struct hlist_head hpte_hash_vpte[HPTEG_HASH_NUM_VPTE]; + struct hlist_head hpte_hash_vpte_long[HPTEG_HASH_NUM_VPTE_LONG]; +#ifdef CONFIG_PPC_BOOK3S_64 + struct hlist_head hpte_hash_vpte_64k[HPTEG_HASH_NUM_VPTE_64K]; +#endif + int hpte_cache_count; + spinlock_t mmu_lock; +}; + +#define VSID_REAL 0x07ffffffffc00000ULL +#define VSID_BAT 0x07ffffffffb00000ULL +#define VSID_64K 0x0800000000000000ULL +#define VSID_1T 0x1000000000000000ULL +#define VSID_REAL_DR 0x2000000000000000ULL +#define VSID_REAL_IR 0x4000000000000000ULL +#define VSID_PR 0x8000000000000000ULL + +extern void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, ulong ea, ulong ea_mask); +extern void kvmppc_mmu_pte_vflush(struct kvm_vcpu *vcpu, u64 vp, u64 vp_mask); +extern void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, ulong pa_start, ulong pa_end); +extern void kvmppc_set_msr(struct kvm_vcpu *vcpu, u64 new_msr); +extern void kvmppc_mmu_book3s_64_init(struct kvm_vcpu *vcpu); +extern void kvmppc_mmu_book3s_32_init(struct kvm_vcpu *vcpu); +extern void kvmppc_mmu_book3s_hv_init(struct kvm_vcpu *vcpu); +extern int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte, + bool iswrite); +extern void kvmppc_mmu_unmap_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte); +extern int kvmppc_mmu_map_segment(struct kvm_vcpu *vcpu, ulong eaddr); +extern void kvmppc_mmu_flush_segment(struct kvm_vcpu *vcpu, ulong eaddr, ulong seg_size); +extern void kvmppc_mmu_flush_segments(struct kvm_vcpu *vcpu); +extern int kvmppc_book3s_hv_page_fault(struct kvm_vcpu *vcpu, + unsigned long addr, unsigned long status); +extern long kvmppc_hv_find_lock_hpte(struct kvm *kvm, gva_t eaddr, + unsigned long slb_v, unsigned long valid); +extern int kvmppc_hv_emulate_mmio(struct kvm_vcpu *vcpu, + unsigned long gpa, gva_t ea, int is_store); + +extern void kvmppc_mmu_hpte_cache_map(struct kvm_vcpu *vcpu, struct hpte_cache *pte); +extern struct hpte_cache *kvmppc_mmu_hpte_cache_next(struct kvm_vcpu *vcpu); +extern void kvmppc_mmu_hpte_cache_free(struct hpte_cache *pte); +extern void kvmppc_mmu_hpte_destroy(struct kvm_vcpu *vcpu); +extern int kvmppc_mmu_hpte_init(struct kvm_vcpu *vcpu); +extern void kvmppc_mmu_invalidate_pte(struct kvm_vcpu *vcpu, struct hpte_cache *pte); +extern int kvmppc_mmu_hpte_sysinit(void); +extern void kvmppc_mmu_hpte_sysexit(void); +extern int kvmppc_mmu_hv_init(void); +extern int kvmppc_book3s_hcall_implemented(struct kvm *kvm, unsigned long hc); + +extern int kvmppc_book3s_radix_page_fault(struct kvm_vcpu *vcpu, + unsigned long ea, unsigned long dsisr); +extern unsigned long __kvmhv_copy_tofrom_guest_radix(int lpid, int pid, + gva_t eaddr, void *to, void *from, + unsigned long n); +extern long kvmhv_copy_from_guest_radix(struct kvm_vcpu *vcpu, gva_t eaddr, + void *to, unsigned long n); +extern long kvmhv_copy_to_guest_radix(struct kvm_vcpu *vcpu, gva_t eaddr, + void *from, unsigned long n); +extern int kvmppc_mmu_walk_radix_tree(struct kvm_vcpu *vcpu, gva_t eaddr, + struct kvmppc_pte *gpte, u64 root, + u64 *pte_ret_p); +extern int kvmppc_mmu_radix_translate_table(struct kvm_vcpu *vcpu, gva_t eaddr, + struct kvmppc_pte *gpte, u64 table, + int table_index, u64 *pte_ret_p); +extern int kvmppc_mmu_radix_xlate(struct kvm_vcpu *vcpu, gva_t eaddr, + struct kvmppc_pte *gpte, bool data, bool iswrite); +extern void kvmppc_radix_tlbie_page(struct kvm *kvm, unsigned long addr, + unsigned int pshift, unsigned int lpid); +extern void kvmppc_unmap_pte(struct kvm *kvm, pte_t *pte, unsigned long gpa, + unsigned int shift, + const struct kvm_memory_slot *memslot, + unsigned int lpid); +extern bool kvmppc_hv_handle_set_rc(struct kvm *kvm, bool nested, + bool writing, unsigned long gpa, + unsigned int lpid); +extern int kvmppc_book3s_instantiate_page(struct kvm_vcpu *vcpu, + unsigned long gpa, + struct kvm_memory_slot *memslot, + bool writing, bool kvm_ro, + pte_t *inserted_pte, unsigned int *levelp); +extern int kvmppc_init_vm_radix(struct kvm *kvm); +extern void kvmppc_free_radix(struct kvm *kvm); +extern void kvmppc_free_pgtable_radix(struct kvm *kvm, pgd_t *pgd, + unsigned int lpid); +extern int kvmppc_radix_init(void); +extern void kvmppc_radix_exit(void); +extern int kvm_unmap_radix(struct kvm *kvm, struct kvm_memory_slot *memslot, + unsigned long gfn); +extern int kvm_age_radix(struct kvm *kvm, struct kvm_memory_slot *memslot, + unsigned long gfn); +extern int kvm_test_age_radix(struct kvm *kvm, struct kvm_memory_slot *memslot, + unsigned long gfn); +extern long kvmppc_hv_get_dirty_log_radix(struct kvm *kvm, + struct kvm_memory_slot *memslot, unsigned long *map); +extern void kvmppc_radix_flush_memslot(struct kvm *kvm, + const struct kvm_memory_slot *memslot); +extern int kvmhv_get_rmmu_info(struct kvm *kvm, struct kvm_ppc_rmmu_info *info); + +/* XXX remove this export when load_last_inst() is generic */ +extern int kvmppc_ld(struct kvm_vcpu *vcpu, ulong *eaddr, int size, void *ptr, bool data); +extern void kvmppc_book3s_queue_irqprio(struct kvm_vcpu *vcpu, unsigned int vec); +extern void kvmppc_book3s_dequeue_irqprio(struct kvm_vcpu *vcpu, + unsigned int vec); +extern void kvmppc_inject_interrupt(struct kvm_vcpu *vcpu, int vec, u64 flags); +extern void kvmppc_trigger_fac_interrupt(struct kvm_vcpu *vcpu, ulong fac); +extern void kvmppc_set_bat(struct kvm_vcpu *vcpu, struct kvmppc_bat *bat, + bool upper, u32 val); +extern void kvmppc_giveup_ext(struct kvm_vcpu *vcpu, ulong msr); +extern int kvmppc_emulate_paired_single(struct kvm_vcpu *vcpu); +extern kvm_pfn_t kvmppc_gpa_to_pfn(struct kvm_vcpu *vcpu, gpa_t gpa, + bool writing, bool *writable); +extern void kvmppc_add_revmap_chain(struct kvm *kvm, struct revmap_entry *rev, + unsigned long *rmap, long pte_index, int realmode); +extern void kvmppc_update_dirty_map(const struct kvm_memory_slot *memslot, + unsigned long gfn, unsigned long psize); +extern void kvmppc_invalidate_hpte(struct kvm *kvm, __be64 *hptep, + unsigned long pte_index); +void kvmppc_clear_ref_hpte(struct kvm *kvm, __be64 *hptep, + unsigned long pte_index); +extern void *kvmppc_pin_guest_page(struct kvm *kvm, unsigned long addr, + unsigned long *nb_ret); +extern void kvmppc_unpin_guest_page(struct kvm *kvm, void *addr, + unsigned long gpa, bool dirty); +extern long kvmppc_do_h_enter(struct kvm *kvm, unsigned long flags, + long pte_index, unsigned long pteh, unsigned long ptel, + pgd_t *pgdir, bool realmode, unsigned long *idx_ret); +extern long kvmppc_do_h_remove(struct kvm *kvm, unsigned long flags, + unsigned long pte_index, unsigned long avpn, + unsigned long *hpret); +extern long kvmppc_hv_get_dirty_log_hpt(struct kvm *kvm, + struct kvm_memory_slot *memslot, unsigned long *map); +extern void kvmppc_harvest_vpa_dirty(struct kvmppc_vpa *vpa, + struct kvm_memory_slot *memslot, + unsigned long *map); +extern void kvmppc_update_lpcr(struct kvm *kvm, unsigned long lpcr, + unsigned long mask); +extern void kvmppc_set_fscr(struct kvm_vcpu *vcpu, u64 fscr); + +extern int kvmhv_p9_tm_emulation_early(struct kvm_vcpu *vcpu); +extern int kvmhv_p9_tm_emulation(struct kvm_vcpu *vcpu); +extern void kvmhv_emulate_tm_rollback(struct kvm_vcpu *vcpu); + +extern void kvmppc_entry_trampoline(void); +extern void kvmppc_hv_entry_trampoline(void); +extern u32 kvmppc_alignment_dsisr(struct kvm_vcpu *vcpu, unsigned int inst); +extern ulong kvmppc_alignment_dar(struct kvm_vcpu *vcpu, unsigned int inst); +extern int kvmppc_h_pr(struct kvm_vcpu *vcpu, unsigned long cmd); +extern void kvmppc_pr_init_default_hcalls(struct kvm *kvm); +extern int kvmppc_hcall_impl_pr(unsigned long cmd); +extern int kvmppc_hcall_impl_hv_realmode(unsigned long cmd); +extern void kvmppc_copy_to_svcpu(struct kvm_vcpu *vcpu); +extern void kvmppc_copy_from_svcpu(struct kvm_vcpu *vcpu); + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +void kvmppc_save_tm_pr(struct kvm_vcpu *vcpu); +void kvmppc_restore_tm_pr(struct kvm_vcpu *vcpu); +void kvmppc_save_tm_sprs(struct kvm_vcpu *vcpu); +void kvmppc_restore_tm_sprs(struct kvm_vcpu *vcpu); +#else +static inline void kvmppc_save_tm_pr(struct kvm_vcpu *vcpu) {} +static inline void kvmppc_restore_tm_pr(struct kvm_vcpu *vcpu) {} +static inline void kvmppc_save_tm_sprs(struct kvm_vcpu *vcpu) {} +static inline void kvmppc_restore_tm_sprs(struct kvm_vcpu *vcpu) {} +#endif + +long kvmhv_nested_init(void); +void kvmhv_nested_exit(void); +void kvmhv_vm_nested_init(struct kvm *kvm); +long kvmhv_set_partition_table(struct kvm_vcpu *vcpu); +long kvmhv_copy_tofrom_guest_nested(struct kvm_vcpu *vcpu); +void kvmhv_set_ptbl_entry(unsigned int lpid, u64 dw0, u64 dw1); +void kvmhv_release_all_nested(struct kvm *kvm); +long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu); +long kvmhv_do_nested_tlbie(struct kvm_vcpu *vcpu); +int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, + u64 time_limit, unsigned long lpcr); +void kvmhv_save_hv_regs(struct kvm_vcpu *vcpu, struct hv_guest_state *hr); +void kvmhv_restore_hv_return_state(struct kvm_vcpu *vcpu, + struct hv_guest_state *hr); +long int kvmhv_nested_page_fault(struct kvm_vcpu *vcpu); + +void kvmppc_giveup_fac(struct kvm_vcpu *vcpu, ulong fac); + +extern int kvm_irq_bypass; + +static inline struct kvmppc_vcpu_book3s *to_book3s(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.book3s; +} + +/* Also add subarch specific defines */ + +#ifdef CONFIG_KVM_BOOK3S_32_HANDLER +#include <asm/kvm_book3s_32.h> +#endif +#ifdef CONFIG_KVM_BOOK3S_64_HANDLER +#include <asm/kvm_book3s_64.h> +#endif + +static inline void kvmppc_set_gpr(struct kvm_vcpu *vcpu, int num, ulong val) +{ + vcpu->arch.regs.gpr[num] = val; +} + +static inline ulong kvmppc_get_gpr(struct kvm_vcpu *vcpu, int num) +{ + return vcpu->arch.regs.gpr[num]; +} + +static inline void kvmppc_set_cr(struct kvm_vcpu *vcpu, u32 val) +{ + vcpu->arch.regs.ccr = val; +} + +static inline u32 kvmppc_get_cr(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.regs.ccr; +} + +static inline void kvmppc_set_xer(struct kvm_vcpu *vcpu, ulong val) +{ + vcpu->arch.regs.xer = val; +} + +static inline ulong kvmppc_get_xer(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.regs.xer; +} + +static inline void kvmppc_set_ctr(struct kvm_vcpu *vcpu, ulong val) +{ + vcpu->arch.regs.ctr = val; +} + +static inline ulong kvmppc_get_ctr(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.regs.ctr; +} + +static inline void kvmppc_set_lr(struct kvm_vcpu *vcpu, ulong val) +{ + vcpu->arch.regs.link = val; +} + +static inline ulong kvmppc_get_lr(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.regs.link; +} + +static inline void kvmppc_set_pc(struct kvm_vcpu *vcpu, ulong val) +{ + vcpu->arch.regs.nip = val; +} + +static inline ulong kvmppc_get_pc(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.regs.nip; +} + +static inline u64 kvmppc_get_msr(struct kvm_vcpu *vcpu); +static inline bool kvmppc_need_byteswap(struct kvm_vcpu *vcpu) +{ + return (kvmppc_get_msr(vcpu) & MSR_LE) != (MSR_KERNEL & MSR_LE); +} + +static inline ulong kvmppc_get_fault_dar(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.fault_dar; +} + +static inline bool is_kvmppc_resume_guest(int r) +{ + return (r == RESUME_GUEST || r == RESUME_GUEST_NV); +} + +static inline bool is_kvmppc_hv_enabled(struct kvm *kvm); +static inline bool kvmppc_supports_magic_page(struct kvm_vcpu *vcpu) +{ + /* Only PR KVM supports the magic page */ + return !is_kvmppc_hv_enabled(vcpu->kvm); +} + +extern int kvmppc_h_logical_ci_load(struct kvm_vcpu *vcpu); +extern int kvmppc_h_logical_ci_store(struct kvm_vcpu *vcpu); + +/* Magic register values loaded into r3 and r4 before the 'sc' assembly + * instruction for the OSI hypercalls */ +#define OSI_SC_MAGIC_R3 0x113724FA +#define OSI_SC_MAGIC_R4 0x77810F9B + +#define INS_DCBZ 0x7c0007ec +/* TO = 31 for unconditional trap */ +#define INS_TW 0x7fe00008 + +#define SPLIT_HACK_MASK 0xff000000 +#define SPLIT_HACK_OFFS 0xfb000000 + +/* + * This packs a VCPU ID from the [0..KVM_MAX_VCPU_ID) space down to the + * [0..KVM_MAX_VCPUS) space, using knowledge of the guest's core stride + * (but not its actual threading mode, which is not available) to avoid + * collisions. + * + * The implementation leaves VCPU IDs from the range [0..KVM_MAX_VCPUS) (block + * 0) unchanged: if the guest is filling each VCORE completely then it will be + * using consecutive IDs and it will fill the space without any packing. + * + * For higher VCPU IDs, the packed ID is based on the VCPU ID modulo + * KVM_MAX_VCPUS (effectively masking off the top bits) and then an offset is + * added to avoid collisions. + * + * VCPU IDs in the range [KVM_MAX_VCPUS..(KVM_MAX_VCPUS*2)) (block 1) are only + * possible if the guest is leaving at least 1/2 of each VCORE empty, so IDs + * can be safely packed into the second half of each VCORE by adding an offset + * of (stride / 2). + * + * Similarly, if VCPU IDs in the range [(KVM_MAX_VCPUS*2)..(KVM_MAX_VCPUS*4)) + * (blocks 2 and 3) are seen, the guest must be leaving at least 3/4 of each + * VCORE empty so packed IDs can be offset by (stride / 4) and (stride * 3 / 4). + * + * Finally, VCPU IDs from blocks 5..7 will only be seen if the guest is using a + * stride of 8 and 1 thread per core so the remaining offsets of 1, 5, 3 and 7 + * must be free to use. + * + * (The offsets for each block are stored in block_offsets[], indexed by the + * block number if the stride is 8. For cases where the guest's stride is less + * than 8, we can re-use the block_offsets array by multiplying the block + * number by (MAX_SMT_THREADS / stride) to reach the correct entry.) + */ +static inline u32 kvmppc_pack_vcpu_id(struct kvm *kvm, u32 id) +{ + const int block_offsets[MAX_SMT_THREADS] = {0, 4, 2, 6, 1, 5, 3, 7}; + int stride = kvm->arch.emul_smt_mode; + int block = (id / KVM_MAX_VCPUS) * (MAX_SMT_THREADS / stride); + u32 packed_id; + + if (WARN_ONCE(block >= MAX_SMT_THREADS, "VCPU ID too large to pack")) + return 0; + packed_id = (id % KVM_MAX_VCPUS) + block_offsets[block]; + if (WARN_ONCE(packed_id >= KVM_MAX_VCPUS, "VCPU ID packing failed")) + return 0; + return packed_id; +} + +#endif /* __ASM_KVM_BOOK3S_H__ */ diff --git a/arch/powerpc/include/asm/kvm_book3s_32.h b/arch/powerpc/include/asm/kvm_book3s_32.h new file mode 100644 index 000000000..e9d2e8463 --- /dev/null +++ b/arch/powerpc/include/asm/kvm_book3s_32.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * + * Copyright SUSE Linux Products GmbH 2010 + * + * Authors: Alexander Graf <agraf@suse.de> + */ + +#ifndef __ASM_KVM_BOOK3S_32_H__ +#define __ASM_KVM_BOOK3S_32_H__ + +static inline struct kvmppc_book3s_shadow_vcpu *svcpu_get(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.shadow_vcpu; +} + +static inline void svcpu_put(struct kvmppc_book3s_shadow_vcpu *svcpu) +{ +} + +#define PTE_SIZE 12 +#define VSID_ALL 0 +#define SR_INVALID 0x00000001 /* VSID 1 should always be unused */ +#define SR_KP 0x20000000 +#define PTE_V 0x80000000 +#define PTE_SEC 0x00000040 +#define PTE_M 0x00000010 +#define PTE_R 0x00000100 +#define PTE_C 0x00000080 + +#define SID_SHIFT 28 +#define ESID_MASK 0xf0000000 +#define VSID_MASK 0x00fffffff0000000ULL +#define VPN_SHIFT 12 + +#endif /* __ASM_KVM_BOOK3S_32_H__ */ diff --git a/arch/powerpc/include/asm/kvm_book3s_64.h b/arch/powerpc/include/asm/kvm_book3s_64.h new file mode 100644 index 000000000..9bb9bb370 --- /dev/null +++ b/arch/powerpc/include/asm/kvm_book3s_64.h @@ -0,0 +1,681 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * + * Copyright SUSE Linux Products GmbH 2010 + * + * Authors: Alexander Graf <agraf@suse.de> + */ + +#ifndef __ASM_KVM_BOOK3S_64_H__ +#define __ASM_KVM_BOOK3S_64_H__ + +#include <linux/string.h> +#include <asm/bitops.h> +#include <asm/book3s/64/mmu-hash.h> +#include <asm/cpu_has_feature.h> +#include <asm/ppc-opcode.h> +#include <asm/pte-walk.h> + +#ifdef CONFIG_PPC_PSERIES +static inline bool kvmhv_on_pseries(void) +{ + return !cpu_has_feature(CPU_FTR_HVMODE); +} +#else +static inline bool kvmhv_on_pseries(void) +{ + return false; +} +#endif + +/* + * Structure for a nested guest, that is, for a guest that is managed by + * one of our guests. + */ +struct kvm_nested_guest { + struct kvm *l1_host; /* L1 VM that owns this nested guest */ + int l1_lpid; /* lpid L1 guest thinks this guest is */ + int shadow_lpid; /* real lpid of this nested guest */ + pgd_t *shadow_pgtable; /* our page table for this guest */ + u64 l1_gr_to_hr; /* L1's addr of part'n-scoped table */ + u64 process_table; /* process table entry for this guest */ + long refcnt; /* number of pointers to this struct */ + struct mutex tlb_lock; /* serialize page faults and tlbies */ + struct kvm_nested_guest *next; + cpumask_t need_tlb_flush; + cpumask_t cpu_in_guest; + short prev_cpu[NR_CPUS]; + u8 radix; /* is this nested guest radix */ +}; + +/* + * We define a nested rmap entry as a single 64-bit quantity + * 0xFFF0000000000000 12-bit lpid field + * 0x000FFFFFFFFFF000 40-bit guest 4k page frame number + * 0x0000000000000001 1-bit single entry flag + */ +#define RMAP_NESTED_LPID_MASK 0xFFF0000000000000UL +#define RMAP_NESTED_LPID_SHIFT (52) +#define RMAP_NESTED_GPA_MASK 0x000FFFFFFFFFF000UL +#define RMAP_NESTED_IS_SINGLE_ENTRY 0x0000000000000001UL + +/* Structure for a nested guest rmap entry */ +struct rmap_nested { + struct llist_node list; + u64 rmap; +}; + +/* + * for_each_nest_rmap_safe - iterate over the list of nested rmap entries + * safe against removal of the list entry or NULL list + * @pos: a (struct rmap_nested *) to use as a loop cursor + * @node: pointer to the first entry + * NOTE: this can be NULL + * @rmapp: an (unsigned long *) in which to return the rmap entries on each + * iteration + * NOTE: this must point to already allocated memory + * + * The nested_rmap is a llist of (struct rmap_nested) entries pointed to by the + * rmap entry in the memslot. The list is always terminated by a "single entry" + * stored in the list element of the final entry of the llist. If there is ONLY + * a single entry then this is itself in the rmap entry of the memslot, not a + * llist head pointer. + * + * Note that the iterator below assumes that a nested rmap entry is always + * non-zero. This is true for our usage because the LPID field is always + * non-zero (zero is reserved for the host). + * + * This should be used to iterate over the list of rmap_nested entries with + * processing done on the u64 rmap value given by each iteration. This is safe + * against removal of list entries and it is always safe to call free on (pos). + * + * e.g. + * struct rmap_nested *cursor; + * struct llist_node *first; + * unsigned long rmap; + * for_each_nest_rmap_safe(cursor, first, &rmap) { + * do_something(rmap); + * free(cursor); + * } + */ +#define for_each_nest_rmap_safe(pos, node, rmapp) \ + for ((pos) = llist_entry((node), typeof(*(pos)), list); \ + (node) && \ + (*(rmapp) = ((RMAP_NESTED_IS_SINGLE_ENTRY & ((u64) (node))) ? \ + ((u64) (node)) : ((pos)->rmap))) && \ + (((node) = ((RMAP_NESTED_IS_SINGLE_ENTRY & ((u64) (node))) ? \ + ((struct llist_node *) ((pos) = NULL)) : \ + (pos)->list.next)), true); \ + (pos) = llist_entry((node), typeof(*(pos)), list)) + +struct kvm_nested_guest *kvmhv_get_nested(struct kvm *kvm, int l1_lpid, + bool create); +void kvmhv_put_nested(struct kvm_nested_guest *gp); +int kvmhv_nested_next_lpid(struct kvm *kvm, int lpid); + +/* Encoding of first parameter for H_TLB_INVALIDATE */ +#define H_TLBIE_P1_ENC(ric, prs, r) (___PPC_RIC(ric) | ___PPC_PRS(prs) | \ + ___PPC_R(r)) + +/* Power architecture requires HPT is at least 256kiB, at most 64TiB */ +#define PPC_MIN_HPT_ORDER 18 +#define PPC_MAX_HPT_ORDER 46 + +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE +static inline struct kvmppc_book3s_shadow_vcpu *svcpu_get(struct kvm_vcpu *vcpu) +{ + preempt_disable(); + return &get_paca()->shadow_vcpu; +} + +static inline void svcpu_put(struct kvmppc_book3s_shadow_vcpu *svcpu) +{ + preempt_enable(); +} +#endif + +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE + +static inline bool kvm_is_radix(struct kvm *kvm) +{ + return kvm->arch.radix; +} + +static inline bool kvmhv_vcpu_is_radix(struct kvm_vcpu *vcpu) +{ + bool radix; + + if (vcpu->arch.nested) + radix = vcpu->arch.nested->radix; + else + radix = kvm_is_radix(vcpu->kvm); + + return radix; +} + +#define KVM_DEFAULT_HPT_ORDER 24 /* 16MB HPT by default */ +#endif + +/* + * We use a lock bit in HPTE dword 0 to synchronize updates and + * accesses to each HPTE, and another bit to indicate non-present + * HPTEs. + */ +#define HPTE_V_HVLOCK 0x40UL +#define HPTE_V_ABSENT 0x20UL + +/* + * We use this bit in the guest_rpte field of the revmap entry + * to indicate a modified HPTE. + */ +#define HPTE_GR_MODIFIED (1ul << 62) + +/* These bits are reserved in the guest view of the HPTE */ +#define HPTE_GR_RESERVED HPTE_GR_MODIFIED + +static inline long try_lock_hpte(__be64 *hpte, unsigned long bits) +{ + unsigned long tmp, old; + __be64 be_lockbit, be_bits; + + /* + * We load/store in native endian, but the HTAB is in big endian. If + * we byte swap all data we apply on the PTE we're implicitly correct + * again. + */ + be_lockbit = cpu_to_be64(HPTE_V_HVLOCK); + be_bits = cpu_to_be64(bits); + + asm volatile(" ldarx %0,0,%2\n" + " and. %1,%0,%3\n" + " bne 2f\n" + " or %0,%0,%4\n" + " stdcx. %0,0,%2\n" + " beq+ 2f\n" + " mr %1,%3\n" + "2: isync" + : "=&r" (tmp), "=&r" (old) + : "r" (hpte), "r" (be_bits), "r" (be_lockbit) + : "cc", "memory"); + return old == 0; +} + +static inline void unlock_hpte(__be64 *hpte, unsigned long hpte_v) +{ + hpte_v &= ~HPTE_V_HVLOCK; + asm volatile(PPC_RELEASE_BARRIER "" : : : "memory"); + hpte[0] = cpu_to_be64(hpte_v); +} + +/* Without barrier */ +static inline void __unlock_hpte(__be64 *hpte, unsigned long hpte_v) +{ + hpte_v &= ~HPTE_V_HVLOCK; + hpte[0] = cpu_to_be64(hpte_v); +} + +/* + * These functions encode knowledge of the POWER7/8/9 hardware + * interpretations of the HPTE LP (large page size) field. + */ +static inline int kvmppc_hpte_page_shifts(unsigned long h, unsigned long l) +{ + unsigned int lphi; + + if (!(h & HPTE_V_LARGE)) + return 12; /* 4kB */ + lphi = (l >> 16) & 0xf; + switch ((l >> 12) & 0xf) { + case 0: + return !lphi ? 24 : 0; /* 16MB */ + break; + case 1: + return 16; /* 64kB */ + break; + case 3: + return !lphi ? 34 : 0; /* 16GB */ + break; + case 7: + return (16 << 8) + 12; /* 64kB in 4kB */ + break; + case 8: + if (!lphi) + return (24 << 8) + 16; /* 16MB in 64kkB */ + if (lphi == 3) + return (24 << 8) + 12; /* 16MB in 4kB */ + break; + } + return 0; +} + +static inline int kvmppc_hpte_base_page_shift(unsigned long h, unsigned long l) +{ + return kvmppc_hpte_page_shifts(h, l) & 0xff; +} + +static inline int kvmppc_hpte_actual_page_shift(unsigned long h, unsigned long l) +{ + int tmp = kvmppc_hpte_page_shifts(h, l); + + if (tmp >= 0x100) + tmp >>= 8; + return tmp; +} + +static inline unsigned long kvmppc_actual_pgsz(unsigned long v, unsigned long r) +{ + int shift = kvmppc_hpte_actual_page_shift(v, r); + + if (shift) + return 1ul << shift; + return 0; +} + +static inline int kvmppc_pgsize_lp_encoding(int base_shift, int actual_shift) +{ + switch (base_shift) { + case 12: + switch (actual_shift) { + case 12: + return 0; + case 16: + return 7; + case 24: + return 0x38; + } + break; + case 16: + switch (actual_shift) { + case 16: + return 1; + case 24: + return 8; + } + break; + case 24: + return 0; + } + return -1; +} + +static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r, + unsigned long pte_index) +{ + int a_pgshift, b_pgshift; + unsigned long rb = 0, va_low, sllp; + + b_pgshift = a_pgshift = kvmppc_hpte_page_shifts(v, r); + if (a_pgshift >= 0x100) { + b_pgshift &= 0xff; + a_pgshift >>= 8; + } + + /* + * Ignore the top 14 bits of va + * v have top two bits covering segment size, hence move + * by 16 bits, Also clear the lower HPTE_V_AVPN_SHIFT (7) bits. + * AVA field in v also have the lower 23 bits ignored. + * For base page size 4K we need 14 .. 65 bits (so need to + * collect extra 11 bits) + * For others we need 14..14+i + */ + /* This covers 14..54 bits of va*/ + rb = (v & ~0x7fUL) << 16; /* AVA field */ + + /* + * AVA in v had cleared lower 23 bits. We need to derive + * that from pteg index + */ + va_low = pte_index >> 3; + if (v & HPTE_V_SECONDARY) + va_low = ~va_low; + /* + * get the vpn bits from va_low using reverse of hashing. + * In v we have va with 23 bits dropped and then left shifted + * HPTE_V_AVPN_SHIFT (7) bits. Now to find vsid we need + * right shift it with (SID_SHIFT - (23 - 7)) + */ + if (!(v & HPTE_V_1TB_SEG)) + va_low ^= v >> (SID_SHIFT - 16); + else + va_low ^= v >> (SID_SHIFT_1T - 16); + va_low &= 0x7ff; + + if (b_pgshift <= 12) { + if (a_pgshift > 12) { + sllp = (a_pgshift == 16) ? 5 : 4; + rb |= sllp << 5; /* AP field */ + } + rb |= (va_low & 0x7ff) << 12; /* remaining 11 bits of AVA */ + } else { + int aval_shift; + /* + * remaining bits of AVA/LP fields + * Also contain the rr bits of LP + */ + rb |= (va_low << b_pgshift) & 0x7ff000; + /* + * Now clear not needed LP bits based on actual psize + */ + rb &= ~((1ul << a_pgshift) - 1); + /* + * AVAL field 58..77 - base_page_shift bits of va + * we have space for 58..64 bits, Missing bits should + * be zero filled. +1 is to take care of L bit shift + */ + aval_shift = 64 - (77 - b_pgshift) + 1; + rb |= ((va_low << aval_shift) & 0xfe); + + rb |= 1; /* L field */ + rb |= r & 0xff000 & ((1ul << a_pgshift) - 1); /* LP field */ + } + rb |= (v >> HPTE_V_SSIZE_SHIFT) << 8; /* B field */ + return rb; +} + +static inline unsigned long hpte_rpn(unsigned long ptel, unsigned long psize) +{ + return ((ptel & HPTE_R_RPN) & ~(psize - 1)) >> PAGE_SHIFT; +} + +static inline int hpte_is_writable(unsigned long ptel) +{ + unsigned long pp = ptel & (HPTE_R_PP0 | HPTE_R_PP); + + return pp != PP_RXRX && pp != PP_RXXX; +} + +static inline unsigned long hpte_make_readonly(unsigned long ptel) +{ + if ((ptel & HPTE_R_PP0) || (ptel & HPTE_R_PP) == PP_RWXX) + ptel = (ptel & ~HPTE_R_PP) | PP_RXXX; + else + ptel |= PP_RXRX; + return ptel; +} + +static inline bool hpte_cache_flags_ok(unsigned long hptel, bool is_ci) +{ + unsigned int wimg = hptel & HPTE_R_WIMG; + + /* Handle SAO */ + if (wimg == (HPTE_R_W | HPTE_R_I | HPTE_R_M) && + cpu_has_feature(CPU_FTR_ARCH_206)) + wimg = HPTE_R_M; + + if (!is_ci) + return wimg == HPTE_R_M; + /* + * if host is mapped cache inhibited, make sure hptel also have + * cache inhibited. + */ + if (wimg & HPTE_R_W) /* FIXME!! is this ok for all guest. ? */ + return false; + return !!(wimg & HPTE_R_I); +} + +/* + * If it's present and writable, atomically set dirty and referenced bits and + * return the PTE, otherwise return 0. + */ +static inline pte_t kvmppc_read_update_linux_pte(pte_t *ptep, int writing) +{ + pte_t old_pte, new_pte = __pte(0); + + while (1) { + /* + * Make sure we don't reload from ptep + */ + old_pte = READ_ONCE(*ptep); + /* + * wait until H_PAGE_BUSY is clear then set it atomically + */ + if (unlikely(pte_val(old_pte) & H_PAGE_BUSY)) { + cpu_relax(); + continue; + } + /* If pte is not present return None */ + if (unlikely(!pte_present(old_pte))) + return __pte(0); + + new_pte = pte_mkyoung(old_pte); + if (writing && pte_write(old_pte)) + new_pte = pte_mkdirty(new_pte); + + if (pte_xchg(ptep, old_pte, new_pte)) + break; + } + return new_pte; +} + +static inline bool hpte_read_permission(unsigned long pp, unsigned long key) +{ + if (key) + return PP_RWRX <= pp && pp <= PP_RXRX; + return true; +} + +static inline bool hpte_write_permission(unsigned long pp, unsigned long key) +{ + if (key) + return pp == PP_RWRW; + return pp <= PP_RWRW; +} + +static inline int hpte_get_skey_perm(unsigned long hpte_r, unsigned long amr) +{ + unsigned long skey; + + skey = ((hpte_r & HPTE_R_KEY_HI) >> 57) | + ((hpte_r & HPTE_R_KEY_LO) >> 9); + return (amr >> (62 - 2 * skey)) & 3; +} + +static inline void lock_rmap(unsigned long *rmap) +{ + do { + while (test_bit(KVMPPC_RMAP_LOCK_BIT, rmap)) + cpu_relax(); + } while (test_and_set_bit_lock(KVMPPC_RMAP_LOCK_BIT, rmap)); +} + +static inline void unlock_rmap(unsigned long *rmap) +{ + __clear_bit_unlock(KVMPPC_RMAP_LOCK_BIT, rmap); +} + +static inline bool slot_is_aligned(struct kvm_memory_slot *memslot, + unsigned long pagesize) +{ + unsigned long mask = (pagesize >> PAGE_SHIFT) - 1; + + if (pagesize <= PAGE_SIZE) + return true; + return !(memslot->base_gfn & mask) && !(memslot->npages & mask); +} + +/* + * This works for 4k, 64k and 16M pages on POWER7, + * and 4k and 16M pages on PPC970. + */ +static inline unsigned long slb_pgsize_encoding(unsigned long psize) +{ + unsigned long senc = 0; + + if (psize > 0x1000) { + senc = SLB_VSID_L; + if (psize == 0x10000) + senc |= SLB_VSID_LP_01; + } + return senc; +} + +static inline int is_vrma_hpte(unsigned long hpte_v) +{ + return (hpte_v & ~0xffffffUL) == + (HPTE_V_1TB_SEG | (VRMA_VSID << (40 - 16))); +} + +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE +/* + * Note modification of an HPTE; set the HPTE modified bit + * if anyone is interested. + */ +static inline void note_hpte_modification(struct kvm *kvm, + struct revmap_entry *rev) +{ + if (atomic_read(&kvm->arch.hpte_mod_interest)) + rev->guest_rpte |= HPTE_GR_MODIFIED; +} + +/* + * Like kvm_memslots(), but for use in real mode when we can't do + * any RCU stuff (since the secondary threads are offline from the + * kernel's point of view), and we can't print anything. + * Thus we use rcu_dereference_raw() rather than rcu_dereference_check(). + */ +static inline struct kvm_memslots *kvm_memslots_raw(struct kvm *kvm) +{ + return rcu_dereference_raw_check(kvm->memslots[0]); +} + +extern void kvmppc_mmu_debugfs_init(struct kvm *kvm); +extern void kvmhv_radix_debugfs_init(struct kvm *kvm); + +extern void kvmhv_rm_send_ipi(int cpu); + +static inline unsigned long kvmppc_hpt_npte(struct kvm_hpt_info *hpt) +{ + /* HPTEs are 2**4 bytes long */ + return 1UL << (hpt->order - 4); +} + +static inline unsigned long kvmppc_hpt_mask(struct kvm_hpt_info *hpt) +{ + /* 128 (2**7) bytes in each HPTEG */ + return (1UL << (hpt->order - 7)) - 1; +} + +/* Set bits in a dirty bitmap, which is in LE format */ +static inline void set_dirty_bits(unsigned long *map, unsigned long i, + unsigned long npages) +{ + + if (npages >= 8) + memset((char *)map + i / 8, 0xff, npages / 8); + else + for (; npages; ++i, --npages) + __set_bit_le(i, map); +} + +static inline void set_dirty_bits_atomic(unsigned long *map, unsigned long i, + unsigned long npages) +{ + if (npages >= 8) + memset((char *)map + i / 8, 0xff, npages / 8); + else + for (; npages; ++i, --npages) + set_bit_le(i, map); +} + +static inline u64 sanitize_msr(u64 msr) +{ + msr &= ~MSR_HV; + msr |= MSR_ME; + return msr; +} + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +static inline void copy_from_checkpoint(struct kvm_vcpu *vcpu) +{ + vcpu->arch.regs.ccr = vcpu->arch.cr_tm; + vcpu->arch.regs.xer = vcpu->arch.xer_tm; + vcpu->arch.regs.link = vcpu->arch.lr_tm; + vcpu->arch.regs.ctr = vcpu->arch.ctr_tm; + vcpu->arch.amr = vcpu->arch.amr_tm; + vcpu->arch.ppr = vcpu->arch.ppr_tm; + vcpu->arch.dscr = vcpu->arch.dscr_tm; + vcpu->arch.tar = vcpu->arch.tar_tm; + memcpy(vcpu->arch.regs.gpr, vcpu->arch.gpr_tm, + sizeof(vcpu->arch.regs.gpr)); + vcpu->arch.fp = vcpu->arch.fp_tm; + vcpu->arch.vr = vcpu->arch.vr_tm; + vcpu->arch.vrsave = vcpu->arch.vrsave_tm; +} + +static inline void copy_to_checkpoint(struct kvm_vcpu *vcpu) +{ + vcpu->arch.cr_tm = vcpu->arch.regs.ccr; + vcpu->arch.xer_tm = vcpu->arch.regs.xer; + vcpu->arch.lr_tm = vcpu->arch.regs.link; + vcpu->arch.ctr_tm = vcpu->arch.regs.ctr; + vcpu->arch.amr_tm = vcpu->arch.amr; + vcpu->arch.ppr_tm = vcpu->arch.ppr; + vcpu->arch.dscr_tm = vcpu->arch.dscr; + vcpu->arch.tar_tm = vcpu->arch.tar; + memcpy(vcpu->arch.gpr_tm, vcpu->arch.regs.gpr, + sizeof(vcpu->arch.regs.gpr)); + vcpu->arch.fp_tm = vcpu->arch.fp; + vcpu->arch.vr_tm = vcpu->arch.vr; + vcpu->arch.vrsave_tm = vcpu->arch.vrsave; +} +#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ + +extern int kvmppc_create_pte(struct kvm *kvm, pgd_t *pgtable, pte_t pte, + unsigned long gpa, unsigned int level, + unsigned long mmu_seq, unsigned int lpid, + unsigned long *rmapp, struct rmap_nested **n_rmap); +extern void kvmhv_insert_nest_rmap(struct kvm *kvm, unsigned long *rmapp, + struct rmap_nested **n_rmap); +extern void kvmhv_update_nest_rmap_rc_list(struct kvm *kvm, unsigned long *rmapp, + unsigned long clr, unsigned long set, + unsigned long hpa, unsigned long nbytes); +extern void kvmhv_remove_nest_rmap_range(struct kvm *kvm, + const struct kvm_memory_slot *memslot, + unsigned long gpa, unsigned long hpa, + unsigned long nbytes); + +static inline pte_t * +find_kvm_secondary_pte_unlocked(struct kvm *kvm, unsigned long ea, + unsigned *hshift) +{ + pte_t *pte; + + pte = __find_linux_pte(kvm->arch.pgtable, ea, NULL, hshift); + return pte; +} + +static inline pte_t *find_kvm_secondary_pte(struct kvm *kvm, unsigned long ea, + unsigned *hshift) +{ + pte_t *pte; + + VM_WARN(!spin_is_locked(&kvm->mmu_lock), + "%s called with kvm mmu_lock not held \n", __func__); + pte = __find_linux_pte(kvm->arch.pgtable, ea, NULL, hshift); + + return pte; +} + +static inline pte_t *find_kvm_host_pte(struct kvm *kvm, unsigned long mmu_seq, + unsigned long ea, unsigned *hshift) +{ + pte_t *pte; + + VM_WARN(!spin_is_locked(&kvm->mmu_lock), + "%s called with kvm mmu_lock not held \n", __func__); + + if (mmu_notifier_retry(kvm, mmu_seq)) + return NULL; + + pte = __find_linux_pte(kvm->mm->pgd, ea, NULL, hshift); + + return pte; +} + +extern pte_t *find_kvm_nested_guest_pte(struct kvm *kvm, unsigned long lpid, + unsigned long ea, unsigned *hshift); + +#endif /* CONFIG_KVM_BOOK3S_HV_POSSIBLE */ + +#endif /* __ASM_KVM_BOOK3S_64_H__ */ diff --git a/arch/powerpc/include/asm/kvm_book3s_asm.h b/arch/powerpc/include/asm/kvm_book3s_asm.h new file mode 100644 index 000000000..078f4648e --- /dev/null +++ b/arch/powerpc/include/asm/kvm_book3s_asm.h @@ -0,0 +1,174 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * + * Copyright SUSE Linux Products GmbH 2009 + * + * Authors: Alexander Graf <agraf@suse.de> + */ + +#ifndef __ASM_KVM_BOOK3S_ASM_H__ +#define __ASM_KVM_BOOK3S_ASM_H__ + +/* XICS ICP register offsets */ +#define XICS_XIRR 4 +#define XICS_MFRR 0xc +#define XICS_IPI 2 /* interrupt source # for IPIs */ + +/* LPIDs we support with this build -- runtime limit may be lower */ +#define KVMPPC_NR_LPIDS (LPID_RSVD + 1) + +/* Maximum number of threads per physical core */ +#define MAX_SMT_THREADS 8 + +/* Maximum number of subcores per physical core */ +#define MAX_SUBCORES 4 + +#ifdef __ASSEMBLY__ + +#ifdef CONFIG_KVM_BOOK3S_HANDLER + +#include <asm/kvm_asm.h> + +.macro DO_KVM intno + .if (\intno == BOOK3S_INTERRUPT_SYSTEM_RESET) || \ + (\intno == BOOK3S_INTERRUPT_MACHINE_CHECK) || \ + (\intno == BOOK3S_INTERRUPT_DATA_STORAGE) || \ + (\intno == BOOK3S_INTERRUPT_INST_STORAGE) || \ + (\intno == BOOK3S_INTERRUPT_DATA_SEGMENT) || \ + (\intno == BOOK3S_INTERRUPT_INST_SEGMENT) || \ + (\intno == BOOK3S_INTERRUPT_EXTERNAL) || \ + (\intno == BOOK3S_INTERRUPT_EXTERNAL_HV) || \ + (\intno == BOOK3S_INTERRUPT_ALIGNMENT) || \ + (\intno == BOOK3S_INTERRUPT_PROGRAM) || \ + (\intno == BOOK3S_INTERRUPT_FP_UNAVAIL) || \ + (\intno == BOOK3S_INTERRUPT_DECREMENTER) || \ + (\intno == BOOK3S_INTERRUPT_SYSCALL) || \ + (\intno == BOOK3S_INTERRUPT_TRACE) || \ + (\intno == BOOK3S_INTERRUPT_PERFMON) || \ + (\intno == BOOK3S_INTERRUPT_ALTIVEC) || \ + (\intno == BOOK3S_INTERRUPT_VSX) + + b kvmppc_trampoline_\intno +kvmppc_resume_\intno: + + .endif +.endm + +#else + +.macro DO_KVM intno +.endm + +#endif /* CONFIG_KVM_BOOK3S_HANDLER */ + +#else /*__ASSEMBLY__ */ + +struct kvmppc_vcore; + +/* Struct used for coordinating micro-threading (split-core) mode changes */ +struct kvm_split_mode { + unsigned long rpr; + unsigned long pmmar; + unsigned long ldbar; + u8 subcore_size; + u8 do_nap; + u8 napped[MAX_SMT_THREADS]; + struct kvmppc_vcore *vc[MAX_SUBCORES]; + /* Bits for changing lpcr on P9 */ + unsigned long lpcr_req; + unsigned long lpidr_req; + unsigned long host_lpcr; + u32 do_set; + u32 do_restore; + union { + u32 allphases; + u8 phase[4]; + } lpcr_sync; +}; + +/* + * This struct goes in the PACA on 64-bit processors. It is used + * to store host state that needs to be saved when we enter a guest + * and restored when we exit, but isn't specific to any particular + * guest or vcpu. It also has some scratch fields used by the guest + * exit code. + */ +struct kvmppc_host_state { + ulong host_r1; + ulong host_r2; + ulong host_msr; + ulong vmhandler; + ulong scratch0; + ulong scratch1; + ulong scratch2; + u8 in_guest; + u8 restore_hid5; + u8 napping; + +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE + u8 hwthread_req; + u8 hwthread_state; + u8 host_ipi; + u8 ptid; /* thread number within subcore when split */ + u8 tid; /* thread number within whole core */ + u8 fake_suspend; + struct kvm_vcpu *kvm_vcpu; + struct kvmppc_vcore *kvm_vcore; + void __iomem *xics_phys; + void __iomem *xive_tima_phys; + void __iomem *xive_tima_virt; + u32 saved_xirr; + u64 dabr; + u64 host_mmcr[10]; /* MMCR 0,1,A, SIAR, SDAR, MMCR2, SIER, MMCR3, SIER2/3 */ + u32 host_pmc[8]; + u64 host_purr; + u64 host_spurr; + u64 host_dscr; + u64 dec_expires; + struct kvm_split_mode *kvm_split_mode; +#endif +#ifdef CONFIG_PPC_BOOK3S_64 + u64 cfar; + u64 ppr; + u64 host_fscr; +#endif +}; + +struct kvmppc_book3s_shadow_vcpu { + bool in_use; + ulong gpr[14]; + u32 cr; + ulong xer; + ulong ctr; + ulong lr; + ulong pc; + + ulong shadow_srr1; + ulong fault_dar; + u32 fault_dsisr; + u32 last_inst; + +#ifdef CONFIG_PPC_BOOK3S_32 + u32 sr[16]; /* Guest SRs */ + + struct kvmppc_host_state hstate; +#endif + +#ifdef CONFIG_PPC_BOOK3S_64 + u8 slb_max; /* highest used guest slb entry */ + struct { + u64 esid; + u64 vsid; + } slb[64]; /* guest SLB */ + u64 shadow_fscr; +#endif +}; + +#endif /*__ASSEMBLY__ */ + +/* Values for kvm_state */ +#define KVM_HWTHREAD_IN_KERNEL 0 +#define KVM_HWTHREAD_IN_IDLE 1 +#define KVM_HWTHREAD_IN_KVM 2 + +#endif /* __ASM_KVM_BOOK3S_ASM_H__ */ diff --git a/arch/powerpc/include/asm/kvm_book3s_uvmem.h b/arch/powerpc/include/asm/kvm_book3s_uvmem.h new file mode 100644 index 000000000..0a6319448 --- /dev/null +++ b/arch/powerpc/include/asm/kvm_book3s_uvmem.h @@ -0,0 +1,100 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_KVM_BOOK3S_UVMEM_H__ +#define __ASM_KVM_BOOK3S_UVMEM_H__ + +#ifdef CONFIG_PPC_UV +int kvmppc_uvmem_init(void); +void kvmppc_uvmem_free(void); +bool kvmppc_uvmem_available(void); +int kvmppc_uvmem_slot_init(struct kvm *kvm, const struct kvm_memory_slot *slot); +void kvmppc_uvmem_slot_free(struct kvm *kvm, + const struct kvm_memory_slot *slot); +unsigned long kvmppc_h_svm_page_in(struct kvm *kvm, + unsigned long gra, + unsigned long flags, + unsigned long page_shift); +unsigned long kvmppc_h_svm_page_out(struct kvm *kvm, + unsigned long gra, + unsigned long flags, + unsigned long page_shift); +unsigned long kvmppc_h_svm_init_start(struct kvm *kvm); +unsigned long kvmppc_h_svm_init_done(struct kvm *kvm); +int kvmppc_send_page_to_uv(struct kvm *kvm, unsigned long gfn); +unsigned long kvmppc_h_svm_init_abort(struct kvm *kvm); +void kvmppc_uvmem_drop_pages(const struct kvm_memory_slot *free, + struct kvm *kvm, bool skip_page_out); +int kvmppc_uvmem_memslot_create(struct kvm *kvm, + const struct kvm_memory_slot *new); +void kvmppc_uvmem_memslot_delete(struct kvm *kvm, + const struct kvm_memory_slot *old); +#else +static inline int kvmppc_uvmem_init(void) +{ + return 0; +} + +static inline void kvmppc_uvmem_free(void) { } + +static inline bool kvmppc_uvmem_available(void) +{ + return false; +} + +static inline int +kvmppc_uvmem_slot_init(struct kvm *kvm, const struct kvm_memory_slot *slot) +{ + return 0; +} + +static inline void +kvmppc_uvmem_slot_free(struct kvm *kvm, const struct kvm_memory_slot *slot) { } + +static inline unsigned long +kvmppc_h_svm_page_in(struct kvm *kvm, unsigned long gra, + unsigned long flags, unsigned long page_shift) +{ + return H_UNSUPPORTED; +} + +static inline unsigned long +kvmppc_h_svm_page_out(struct kvm *kvm, unsigned long gra, + unsigned long flags, unsigned long page_shift) +{ + return H_UNSUPPORTED; +} + +static inline unsigned long kvmppc_h_svm_init_start(struct kvm *kvm) +{ + return H_UNSUPPORTED; +} + +static inline unsigned long kvmppc_h_svm_init_done(struct kvm *kvm) +{ + return H_UNSUPPORTED; +} + +static inline unsigned long kvmppc_h_svm_init_abort(struct kvm *kvm) +{ + return H_UNSUPPORTED; +} + +static inline int kvmppc_send_page_to_uv(struct kvm *kvm, unsigned long gfn) +{ + return -EFAULT; +} + +static inline void +kvmppc_uvmem_drop_pages(const struct kvm_memory_slot *free, + struct kvm *kvm, bool skip_page_out) { } + +static inline int kvmppc_uvmem_memslot_create(struct kvm *kvm, + const struct kvm_memory_slot *new) +{ + return H_UNSUPPORTED; +} + +static inline void kvmppc_uvmem_memslot_delete(struct kvm *kvm, + const struct kvm_memory_slot *old) { } + +#endif /* CONFIG_PPC_UV */ +#endif /* __ASM_KVM_BOOK3S_UVMEM_H__ */ diff --git a/arch/powerpc/include/asm/kvm_booke.h b/arch/powerpc/include/asm/kvm_booke.h new file mode 100644 index 000000000..0c3401b2e --- /dev/null +++ b/arch/powerpc/include/asm/kvm_booke.h @@ -0,0 +1,108 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * + * Copyright SUSE Linux Products GmbH 2010 + * + * Authors: Alexander Graf <agraf@suse.de> + */ + +#ifndef __ASM_KVM_BOOKE_H__ +#define __ASM_KVM_BOOKE_H__ + +#include <linux/types.h> +#include <linux/kvm_host.h> + +/* + * Number of available lpids. Only the low-order 6 bits of LPID rgister are + * implemented on e500mc+ cores. + */ +#define KVMPPC_NR_LPIDS 64 + +#define KVMPPC_INST_EHPRIV 0x7c00021c +#define EHPRIV_OC_SHIFT 11 +/* "ehpriv 1" : ehpriv with OC = 1 is used for debug emulation */ +#define EHPRIV_OC_DEBUG 1 + +static inline void kvmppc_set_gpr(struct kvm_vcpu *vcpu, int num, ulong val) +{ + vcpu->arch.regs.gpr[num] = val; +} + +static inline ulong kvmppc_get_gpr(struct kvm_vcpu *vcpu, int num) +{ + return vcpu->arch.regs.gpr[num]; +} + +static inline void kvmppc_set_cr(struct kvm_vcpu *vcpu, u32 val) +{ + vcpu->arch.regs.ccr = val; +} + +static inline u32 kvmppc_get_cr(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.regs.ccr; +} + +static inline void kvmppc_set_xer(struct kvm_vcpu *vcpu, ulong val) +{ + vcpu->arch.regs.xer = val; +} + +static inline ulong kvmppc_get_xer(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.regs.xer; +} + +static inline bool kvmppc_need_byteswap(struct kvm_vcpu *vcpu) +{ + /* XXX Would need to check TLB entry */ + return false; +} + +static inline void kvmppc_set_ctr(struct kvm_vcpu *vcpu, ulong val) +{ + vcpu->arch.regs.ctr = val; +} + +static inline ulong kvmppc_get_ctr(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.regs.ctr; +} + +static inline void kvmppc_set_lr(struct kvm_vcpu *vcpu, ulong val) +{ + vcpu->arch.regs.link = val; +} + +static inline ulong kvmppc_get_lr(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.regs.link; +} + +static inline void kvmppc_set_pc(struct kvm_vcpu *vcpu, ulong val) +{ + vcpu->arch.regs.nip = val; +} + +static inline ulong kvmppc_get_pc(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.regs.nip; +} + +#ifdef CONFIG_BOOKE +static inline ulong kvmppc_get_fault_dar(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.fault_dear; +} +#endif + +static inline bool kvmppc_supports_magic_page(struct kvm_vcpu *vcpu) +{ + /* Magic page is only supported on e500v2 */ +#ifdef CONFIG_KVM_E500V2 + return true; +#else + return false; +#endif +} +#endif /* __ASM_KVM_BOOKE_H__ */ diff --git a/arch/powerpc/include/asm/kvm_booke_hv_asm.h b/arch/powerpc/include/asm/kvm_booke_hv_asm.h new file mode 100644 index 000000000..7487ef582 --- /dev/null +++ b/arch/powerpc/include/asm/kvm_booke_hv_asm.h @@ -0,0 +1,68 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright 2010-2011 Freescale Semiconductor, Inc. + */ + +#ifndef ASM_KVM_BOOKE_HV_ASM_H +#define ASM_KVM_BOOKE_HV_ASM_H + +#include <asm/feature-fixups.h> + +#ifdef __ASSEMBLY__ + +/* + * All exceptions from guest state must go through KVM + * (except for those which are delivered directly to the guest) -- + * there are no exceptions for which we fall through directly to + * the normal host handler. + * + * 32-bit host + * Expected inputs (normal exceptions): + * SCRATCH0 = saved r10 + * r10 = thread struct + * r11 = appropriate SRR1 variant (currently used as scratch) + * r13 = saved CR + * *(r10 + THREAD_NORMSAVE(0)) = saved r11 + * *(r10 + THREAD_NORMSAVE(2)) = saved r13 + * + * Expected inputs (crit/mcheck/debug exceptions): + * appropriate SCRATCH = saved r8 + * r8 = exception level stack frame + * r9 = *(r8 + _CCR) = saved CR + * r11 = appropriate SRR1 variant (currently used as scratch) + * *(r8 + GPR9) = saved r9 + * *(r8 + GPR10) = saved r10 (r10 not yet clobbered) + * *(r8 + GPR11) = saved r11 + * + * 64-bit host + * Expected inputs (GEN/GDBELL/DBG/CRIT/MC exception types): + * r10 = saved CR + * r13 = PACA_POINTER + * *(r13 + PACA_EX##type + EX_R10) = saved r10 + * *(r13 + PACA_EX##type + EX_R11) = saved r11 + * SPRN_SPRG_##type##_SCRATCH = saved r13 + * + * Expected inputs (TLB exception type): + * r10 = saved CR + * r12 = extlb pointer + * r13 = PACA_POINTER + * *(r12 + EX_TLB_R10) = saved r10 + * *(r12 + EX_TLB_R11) = saved r11 + * *(r12 + EX_TLB_R13) = saved r13 + * SPRN_SPRG_GEN_SCRATCH = saved r12 + * + * Only the bolted version of TLB miss exception handlers is supported now. + */ +.macro DO_KVM intno srr1 +#ifdef CONFIG_KVM_BOOKE_HV +BEGIN_FTR_SECTION + mtocrf 0x80, r11 /* check MSR[GS] without clobbering reg */ + bf 3, 1975f + b kvmppc_handler_\intno\()_\srr1 +1975: +END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV) +#endif +.endm + +#endif /*__ASSEMBLY__ */ +#endif /* ASM_KVM_BOOKE_HV_ASM_H */ diff --git a/arch/powerpc/include/asm/kvm_fpu.h b/arch/powerpc/include/asm/kvm_fpu.h new file mode 100644 index 000000000..25df316b7 --- /dev/null +++ b/arch/powerpc/include/asm/kvm_fpu.h @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * + * Copyright Novell Inc. 2010 + * + * Authors: Alexander Graf <agraf@suse.de> + */ + +#ifndef __ASM_KVM_FPU_H__ +#define __ASM_KVM_FPU_H__ + +#include <linux/types.h> + +extern void fps_fres(u64 *fpscr, u32 *dst, u32 *src1); +extern void fps_frsqrte(u64 *fpscr, u32 *dst, u32 *src1); +extern void fps_fsqrts(u64 *fpscr, u32 *dst, u32 *src1); + +extern void fps_fadds(u64 *fpscr, u32 *dst, u32 *src1, u32 *src2); +extern void fps_fdivs(u64 *fpscr, u32 *dst, u32 *src1, u32 *src2); +extern void fps_fmuls(u64 *fpscr, u32 *dst, u32 *src1, u32 *src2); +extern void fps_fsubs(u64 *fpscr, u32 *dst, u32 *src1, u32 *src2); + +extern void fps_fmadds(u64 *fpscr, u32 *dst, u32 *src1, u32 *src2, + u32 *src3); +extern void fps_fmsubs(u64 *fpscr, u32 *dst, u32 *src1, u32 *src2, + u32 *src3); +extern void fps_fnmadds(u64 *fpscr, u32 *dst, u32 *src1, u32 *src2, + u32 *src3); +extern void fps_fnmsubs(u64 *fpscr, u32 *dst, u32 *src1, u32 *src2, + u32 *src3); +extern void fps_fsel(u64 *fpscr, u32 *dst, u32 *src1, u32 *src2, + u32 *src3); + +#define FPD_ONE_IN(name) extern void fpd_ ## name(u64 *fpscr, u32 *cr, \ + u64 *dst, u64 *src1); +#define FPD_TWO_IN(name) extern void fpd_ ## name(u64 *fpscr, u32 *cr, \ + u64 *dst, u64 *src1, u64 *src2); +#define FPD_THREE_IN(name) extern void fpd_ ## name(u64 *fpscr, u32 *cr, \ + u64 *dst, u64 *src1, u64 *src2, u64 *src3); + +extern void fpd_fcmpu(u64 *fpscr, u32 *cr, u64 *src1, u64 *src2); +extern void fpd_fcmpo(u64 *fpscr, u32 *cr, u64 *src1, u64 *src2); + +FPD_ONE_IN(fsqrts) +FPD_ONE_IN(frsqrtes) +FPD_ONE_IN(fres) +FPD_ONE_IN(frsp) +FPD_ONE_IN(fctiw) +FPD_ONE_IN(fctiwz) +FPD_ONE_IN(fsqrt) +FPD_ONE_IN(fre) +FPD_ONE_IN(frsqrte) +FPD_ONE_IN(fneg) +FPD_ONE_IN(fabs) +FPD_TWO_IN(fadds) +FPD_TWO_IN(fsubs) +FPD_TWO_IN(fdivs) +FPD_TWO_IN(fmuls) +FPD_TWO_IN(fcpsgn) +FPD_TWO_IN(fdiv) +FPD_TWO_IN(fadd) +FPD_TWO_IN(fmul) +FPD_TWO_IN(fsub) +FPD_THREE_IN(fmsubs) +FPD_THREE_IN(fmadds) +FPD_THREE_IN(fnmsubs) +FPD_THREE_IN(fnmadds) +FPD_THREE_IN(fsel) +FPD_THREE_IN(fmsub) +FPD_THREE_IN(fmadd) +FPD_THREE_IN(fnmsub) +FPD_THREE_IN(fnmadd) + +extern void kvm_cvt_fd(u32 *from, u64 *to); +extern void kvm_cvt_df(u64 *from, u32 *to); + +#endif diff --git a/arch/powerpc/include/asm/kvm_guest.h b/arch/powerpc/include/asm/kvm_guest.h new file mode 100644 index 000000000..c63105d2c --- /dev/null +++ b/arch/powerpc/include/asm/kvm_guest.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2020 IBM Corporation + */ + +#ifndef _ASM_POWERPC_KVM_GUEST_H_ +#define _ASM_POWERPC_KVM_GUEST_H_ + +#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_KVM_GUEST) +#include <linux/jump_label.h> + +DECLARE_STATIC_KEY_FALSE(kvm_guest); + +static inline bool is_kvm_guest(void) +{ + return static_branch_unlikely(&kvm_guest); +} + +int check_kvm_guest(void); +#else +static inline bool is_kvm_guest(void) { return false; } +static inline int check_kvm_guest(void) { return 0; } +#endif + +#endif /* _ASM_POWERPC_KVM_GUEST_H_ */ diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h new file mode 100644 index 000000000..d67a470e9 --- /dev/null +++ b/arch/powerpc/include/asm/kvm_host.h @@ -0,0 +1,873 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * + * Copyright IBM Corp. 2007 + * + * Authors: Hollis Blanchard <hollisb@us.ibm.com> + */ + +#ifndef __POWERPC_KVM_HOST_H__ +#define __POWERPC_KVM_HOST_H__ + +#include <linux/mutex.h> +#include <linux/hrtimer.h> +#include <linux/interrupt.h> +#include <linux/types.h> +#include <linux/kvm_types.h> +#include <linux/threads.h> +#include <linux/spinlock.h> +#include <linux/kvm_para.h> +#include <linux/list.h> +#include <linux/atomic.h> +#include <asm/kvm_asm.h> +#include <asm/processor.h> +#include <asm/page.h> +#include <asm/cacheflush.h> +#include <asm/hvcall.h> +#include <asm/mce.h> + +#define KVM_MAX_VCPUS NR_CPUS +#define KVM_MAX_VCORES NR_CPUS +#define KVM_USER_MEM_SLOTS 512 + +#include <asm/cputhreads.h> + +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE +#include <asm/kvm_book3s_asm.h> /* for MAX_SMT_THREADS */ +#define KVM_MAX_VCPU_ID (MAX_SMT_THREADS * KVM_MAX_VCORES) +#define KVM_MAX_NESTED_GUESTS KVMPPC_NR_LPIDS + +#else +#define KVM_MAX_VCPU_ID KVM_MAX_VCPUS +#endif /* CONFIG_KVM_BOOK3S_HV_POSSIBLE */ + +#define __KVM_HAVE_ARCH_INTC_INITIALIZED + +#define KVM_HALT_POLL_NS_DEFAULT 10000 /* 10 us */ + +/* These values are internal and can be increased later */ +#define KVM_NR_IRQCHIPS 1 +#define KVM_IRQCHIP_NUM_PINS 256 + +/* PPC-specific vcpu->requests bit members */ +#define KVM_REQ_WATCHDOG KVM_ARCH_REQ(0) +#define KVM_REQ_EPR_EXIT KVM_ARCH_REQ(1) + +#include <linux/mmu_notifier.h> + +#define KVM_ARCH_WANT_MMU_NOTIFIER + +extern int kvm_unmap_hva_range(struct kvm *kvm, + unsigned long start, unsigned long end, + unsigned flags); +extern int kvm_age_hva(struct kvm *kvm, unsigned long start, unsigned long end); +extern int kvm_test_age_hva(struct kvm *kvm, unsigned long hva); +extern int kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte); + +#define HPTEG_CACHE_NUM (1 << 15) +#define HPTEG_HASH_BITS_PTE 13 +#define HPTEG_HASH_BITS_PTE_LONG 12 +#define HPTEG_HASH_BITS_VPTE 13 +#define HPTEG_HASH_BITS_VPTE_LONG 5 +#define HPTEG_HASH_BITS_VPTE_64K 11 +#define HPTEG_HASH_NUM_PTE (1 << HPTEG_HASH_BITS_PTE) +#define HPTEG_HASH_NUM_PTE_LONG (1 << HPTEG_HASH_BITS_PTE_LONG) +#define HPTEG_HASH_NUM_VPTE (1 << HPTEG_HASH_BITS_VPTE) +#define HPTEG_HASH_NUM_VPTE_LONG (1 << HPTEG_HASH_BITS_VPTE_LONG) +#define HPTEG_HASH_NUM_VPTE_64K (1 << HPTEG_HASH_BITS_VPTE_64K) + +/* Physical Address Mask - allowed range of real mode RAM access */ +#define KVM_PAM 0x0fffffffffffffffULL + +struct lppaca; +struct slb_shadow; +struct dtl_entry; + +struct kvmppc_vcpu_book3s; +struct kvmppc_book3s_shadow_vcpu; +struct kvm_nested_guest; + +struct kvm_vm_stat { + ulong remote_tlb_flush; + ulong num_2M_pages; + ulong num_1G_pages; +}; + +struct kvm_vcpu_stat { + u64 sum_exits; + u64 mmio_exits; + u64 signal_exits; + u64 light_exits; + /* Account for special types of light exits: */ + u64 itlb_real_miss_exits; + u64 itlb_virt_miss_exits; + u64 dtlb_real_miss_exits; + u64 dtlb_virt_miss_exits; + u64 syscall_exits; + u64 isi_exits; + u64 dsi_exits; + u64 emulated_inst_exits; + u64 dec_exits; + u64 ext_intr_exits; + u64 halt_poll_success_ns; + u64 halt_poll_fail_ns; + u64 halt_wait_ns; + u64 halt_successful_poll; + u64 halt_attempted_poll; + u64 halt_successful_wait; + u64 halt_poll_invalid; + u64 halt_wakeup; + u64 dbell_exits; + u64 gdbell_exits; + u64 ld; + u64 st; +#ifdef CONFIG_PPC_BOOK3S + u64 pf_storage; + u64 pf_instruc; + u64 sp_storage; + u64 sp_instruc; + u64 queue_intr; + u64 ld_slow; + u64 st_slow; +#endif + u64 pthru_all; + u64 pthru_host; + u64 pthru_bad_aff; +}; + +enum kvm_exit_types { + MMIO_EXITS, + SIGNAL_EXITS, + ITLB_REAL_MISS_EXITS, + ITLB_VIRT_MISS_EXITS, + DTLB_REAL_MISS_EXITS, + DTLB_VIRT_MISS_EXITS, + SYSCALL_EXITS, + ISI_EXITS, + DSI_EXITS, + EMULATED_INST_EXITS, + EMULATED_MTMSRWE_EXITS, + EMULATED_WRTEE_EXITS, + EMULATED_MTSPR_EXITS, + EMULATED_MFSPR_EXITS, + EMULATED_MTMSR_EXITS, + EMULATED_MFMSR_EXITS, + EMULATED_TLBSX_EXITS, + EMULATED_TLBWE_EXITS, + EMULATED_RFI_EXITS, + EMULATED_RFCI_EXITS, + EMULATED_RFDI_EXITS, + DEC_EXITS, + EXT_INTR_EXITS, + HALT_WAKEUP, + USR_PR_INST, + FP_UNAVAIL, + DEBUG_EXITS, + TIMEINGUEST, + DBELL_EXITS, + GDBELL_EXITS, + __NUMBER_OF_KVM_EXIT_TYPES +}; + +/* allow access to big endian 32bit upper/lower parts and 64bit var */ +struct kvmppc_exit_timing { + union { + u64 tv64; + struct { + u32 tbu, tbl; + } tv32; + }; +}; + +struct kvmppc_pginfo { + unsigned long pfn; + atomic_t refcnt; +}; + +struct kvmppc_spapr_tce_iommu_table { + struct rcu_head rcu; + struct list_head next; + struct iommu_table *tbl; + struct kref kref; +}; + +#define TCES_PER_PAGE (PAGE_SIZE / sizeof(u64)) + +struct kvmppc_spapr_tce_table { + struct list_head list; + struct kvm *kvm; + u64 liobn; + struct rcu_head rcu; + u32 page_shift; + u64 offset; /* in pages */ + u64 size; /* window size in pages */ + struct list_head iommu_tables; + struct mutex alloc_lock; + struct page *pages[0]; +}; + +/* XICS components, defined in book3s_xics.c */ +struct kvmppc_xics; +struct kvmppc_icp; +extern struct kvm_device_ops kvm_xics_ops; + +/* XIVE components, defined in book3s_xive.c */ +struct kvmppc_xive; +struct kvmppc_xive_vcpu; +extern struct kvm_device_ops kvm_xive_ops; +extern struct kvm_device_ops kvm_xive_native_ops; + +struct kvmppc_passthru_irqmap; + +/* + * The reverse mapping array has one entry for each HPTE, + * which stores the guest's view of the second word of the HPTE + * (including the guest physical address of the mapping), + * plus forward and backward pointers in a doubly-linked ring + * of HPTEs that map the same host page. The pointers in this + * ring are 32-bit HPTE indexes, to save space. + */ +struct revmap_entry { + unsigned long guest_rpte; + unsigned int forw, back; +}; + +/* + * The rmap array of size number of guest pages is allocated for each memslot. + * This array is used to store usage specific information about the guest page. + * Below are the encodings of the various possible usage types. + */ +/* Free bits which can be used to define a new usage */ +#define KVMPPC_RMAP_TYPE_MASK 0xff00000000000000 +#define KVMPPC_RMAP_NESTED 0xc000000000000000 /* Nested rmap array */ +#define KVMPPC_RMAP_HPT 0x0100000000000000 /* HPT guest */ + +/* + * rmap usage definition for a hash page table (hpt) guest: + * 0x0000080000000000 Lock bit + * 0x0000018000000000 RC bits + * 0x0000000100000000 Present bit + * 0x00000000ffffffff HPT index bits + * The bottom 32 bits are the index in the guest HPT of a HPTE that points to + * the page. + */ +#define KVMPPC_RMAP_LOCK_BIT 43 +#define KVMPPC_RMAP_RC_SHIFT 32 +#define KVMPPC_RMAP_REFERENCED (HPTE_R_R << KVMPPC_RMAP_RC_SHIFT) +#define KVMPPC_RMAP_PRESENT 0x100000000ul +#define KVMPPC_RMAP_INDEX 0xfffffffful + +struct kvm_arch_memory_slot { +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE + unsigned long *rmap; +#endif /* CONFIG_KVM_BOOK3S_HV_POSSIBLE */ +}; + +struct kvm_hpt_info { + /* Host virtual (linear mapping) address of guest HPT */ + unsigned long virt; + /* Array of reverse mapping entries for each guest HPTE */ + struct revmap_entry *rev; + /* Guest HPT size is 2**(order) bytes */ + u32 order; + /* 1 if HPT allocated with CMA, 0 otherwise */ + int cma; +}; + +struct kvm_resize_hpt; + +/* Flag values for kvm_arch.secure_guest */ +#define KVMPPC_SECURE_INIT_START 0x1 /* H_SVM_INIT_START has been called */ +#define KVMPPC_SECURE_INIT_DONE 0x2 /* H_SVM_INIT_DONE completed */ +#define KVMPPC_SECURE_INIT_ABORT 0x4 /* H_SVM_INIT_ABORT issued */ + +struct kvm_arch { + unsigned int lpid; + unsigned int smt_mode; /* # vcpus per virtual core */ + unsigned int emul_smt_mode; /* emualted SMT mode, on P9 */ +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE + unsigned int tlb_sets; + struct kvm_hpt_info hpt; + atomic64_t mmio_update; + unsigned int host_lpid; + unsigned long host_lpcr; + unsigned long sdr1; + unsigned long host_sdr1; + unsigned long lpcr; + unsigned long vrma_slb_v; + int mmu_ready; + atomic_t vcpus_running; + u32 online_vcores; + atomic_t hpte_mod_interest; + cpumask_t need_tlb_flush; + cpumask_t cpu_in_guest; + u8 radix; + u8 fwnmi_enabled; + u8 secure_guest; + u8 svm_enabled; + bool threads_indep; + bool nested_enable; + pgd_t *pgtable; + u64 process_table; + struct dentry *debugfs_dir; + struct kvm_resize_hpt *resize_hpt; /* protected by kvm->lock */ +#endif /* CONFIG_KVM_BOOK3S_HV_POSSIBLE */ +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE + struct mutex hpt_mutex; +#endif +#ifdef CONFIG_PPC_BOOK3S_64 + struct list_head spapr_tce_tables; + struct list_head rtas_tokens; + struct mutex rtas_token_lock; + DECLARE_BITMAP(enabled_hcalls, MAX_HCALL_OPCODE/4 + 1); +#endif +#ifdef CONFIG_KVM_MPIC + struct openpic *mpic; +#endif +#ifdef CONFIG_KVM_XICS + struct kvmppc_xics *xics; + struct kvmppc_xics *xics_device; + struct kvmppc_xive *xive; /* Current XIVE device in use */ + struct { + struct kvmppc_xive *native; + struct kvmppc_xive *xics_on_xive; + } xive_devices; + struct kvmppc_passthru_irqmap *pimap; +#endif + struct kvmppc_ops *kvm_ops; +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE + struct mutex uvmem_lock; + struct list_head uvmem_pfns; + struct mutex mmu_setup_lock; /* nests inside vcpu mutexes */ + u64 l1_ptcr; + int max_nested_lpid; + struct kvm_nested_guest *nested_guests[KVM_MAX_NESTED_GUESTS]; + /* This array can grow quite large, keep it at the end */ + struct kvmppc_vcore *vcores[KVM_MAX_VCORES]; +#endif +}; + +#define VCORE_ENTRY_MAP(vc) ((vc)->entry_exit_map & 0xff) +#define VCORE_EXIT_MAP(vc) ((vc)->entry_exit_map >> 8) +#define VCORE_IS_EXITING(vc) (VCORE_EXIT_MAP(vc) != 0) + +/* This bit is used when a vcore exit is triggered from outside the vcore */ +#define VCORE_EXIT_REQ 0x10000 + +/* + * Values for vcore_state. + * Note that these are arranged such that lower values + * (< VCORE_SLEEPING) don't require stolen time accounting + * on load/unload, and higher values do. + */ +#define VCORE_INACTIVE 0 +#define VCORE_PREEMPT 1 +#define VCORE_PIGGYBACK 2 +#define VCORE_SLEEPING 3 +#define VCORE_RUNNING 4 +#define VCORE_EXITING 5 +#define VCORE_POLLING 6 + +/* + * Struct used to manage memory for a virtual processor area + * registered by a PAPR guest. There are three types of area + * that a guest can register. + */ +struct kvmppc_vpa { + unsigned long gpa; /* Current guest phys addr */ + void *pinned_addr; /* Address in kernel linear mapping */ + void *pinned_end; /* End of region */ + unsigned long next_gpa; /* Guest phys addr for update */ + unsigned long len; /* Number of bytes required */ + u8 update_pending; /* 1 => update pinned_addr from next_gpa */ + bool dirty; /* true => area has been modified by kernel */ +}; + +struct kvmppc_pte { + ulong eaddr; + u64 vpage; + ulong raddr; + bool may_read : 1; + bool may_write : 1; + bool may_execute : 1; + unsigned long wimg; + unsigned long rc; + u8 page_size; /* MMU_PAGE_xxx */ + u8 page_shift; +}; + +struct kvmppc_mmu { + /* book3s_64 only */ + void (*slbmte)(struct kvm_vcpu *vcpu, u64 rb, u64 rs); + u64 (*slbmfee)(struct kvm_vcpu *vcpu, u64 slb_nr); + u64 (*slbmfev)(struct kvm_vcpu *vcpu, u64 slb_nr); + int (*slbfee)(struct kvm_vcpu *vcpu, gva_t eaddr, ulong *ret_slb); + void (*slbie)(struct kvm_vcpu *vcpu, u64 slb_nr); + void (*slbia)(struct kvm_vcpu *vcpu); + /* book3s */ + void (*mtsrin)(struct kvm_vcpu *vcpu, u32 srnum, ulong value); + u32 (*mfsrin)(struct kvm_vcpu *vcpu, u32 srnum); + int (*xlate)(struct kvm_vcpu *vcpu, gva_t eaddr, + struct kvmppc_pte *pte, bool data, bool iswrite); + void (*tlbie)(struct kvm_vcpu *vcpu, ulong addr, bool large); + int (*esid_to_vsid)(struct kvm_vcpu *vcpu, ulong esid, u64 *vsid); + u64 (*ea_to_vp)(struct kvm_vcpu *vcpu, gva_t eaddr, bool data); + bool (*is_dcbz32)(struct kvm_vcpu *vcpu); +}; + +struct kvmppc_slb { + u64 esid; + u64 vsid; + u64 orige; + u64 origv; + bool valid : 1; + bool Ks : 1; + bool Kp : 1; + bool nx : 1; + bool large : 1; /* PTEs are 16MB */ + bool tb : 1; /* 1TB segment */ + bool class : 1; + u8 base_page_size; /* MMU_PAGE_xxx */ +}; + +/* Struct used to accumulate timing information in HV real mode code */ +struct kvmhv_tb_accumulator { + u64 seqcount; /* used to synchronize access, also count * 2 */ + u64 tb_total; /* total time in timebase ticks */ + u64 tb_min; /* min time */ + u64 tb_max; /* max time */ +}; + +#ifdef CONFIG_PPC_BOOK3S_64 +struct kvmppc_irq_map { + u32 r_hwirq; + u32 v_hwirq; + struct irq_desc *desc; +}; + +#define KVMPPC_PIRQ_MAPPED 1024 +struct kvmppc_passthru_irqmap { + int n_mapped; + struct kvmppc_irq_map mapped[KVMPPC_PIRQ_MAPPED]; +}; +#endif + +# ifdef CONFIG_PPC_FSL_BOOK3E +#define KVMPPC_BOOKE_IAC_NUM 2 +#define KVMPPC_BOOKE_DAC_NUM 2 +# else +#define KVMPPC_BOOKE_IAC_NUM 4 +#define KVMPPC_BOOKE_DAC_NUM 2 +# endif +#define KVMPPC_BOOKE_MAX_IAC 4 +#define KVMPPC_BOOKE_MAX_DAC 2 + +/* KVMPPC_EPR_USER takes precedence over KVMPPC_EPR_KERNEL */ +#define KVMPPC_EPR_NONE 0 /* EPR not supported */ +#define KVMPPC_EPR_USER 1 /* exit to userspace to fill EPR */ +#define KVMPPC_EPR_KERNEL 2 /* in-kernel irqchip */ + +#define KVMPPC_IRQ_DEFAULT 0 +#define KVMPPC_IRQ_MPIC 1 +#define KVMPPC_IRQ_XICS 2 /* Includes a XIVE option */ +#define KVMPPC_IRQ_XIVE 3 /* XIVE native exploitation mode */ + +#define MMIO_HPTE_CACHE_SIZE 4 + +struct mmio_hpte_cache_entry { + unsigned long hpte_v; + unsigned long hpte_r; + unsigned long rpte; + unsigned long pte_index; + unsigned long eaddr; + unsigned long slb_v; + long mmio_update; + unsigned int slb_base_pshift; +}; + +struct mmio_hpte_cache { + struct mmio_hpte_cache_entry entry[MMIO_HPTE_CACHE_SIZE]; + unsigned int index; +}; + +#define KVMPPC_VSX_COPY_NONE 0 +#define KVMPPC_VSX_COPY_WORD 1 +#define KVMPPC_VSX_COPY_DWORD 2 +#define KVMPPC_VSX_COPY_DWORD_LOAD_DUMP 3 +#define KVMPPC_VSX_COPY_WORD_LOAD_DUMP 4 + +#define KVMPPC_VMX_COPY_BYTE 8 +#define KVMPPC_VMX_COPY_HWORD 9 +#define KVMPPC_VMX_COPY_WORD 10 +#define KVMPPC_VMX_COPY_DWORD 11 + +struct openpic; + +/* W0 and W1 of a XIVE thread management context */ +union xive_tma_w01 { + struct { + u8 nsr; + u8 cppr; + u8 ipb; + u8 lsmfb; + u8 ack; + u8 inc; + u8 age; + u8 pipr; + }; + __be64 w01; +}; + +struct kvm_vcpu_arch { + ulong host_stack; + u32 host_pid; +#ifdef CONFIG_PPC_BOOK3S + struct kvmppc_slb slb[64]; + int slb_max; /* 1 + index of last valid entry in slb[] */ + int slb_nr; /* total number of entries in SLB */ + struct kvmppc_mmu mmu; + struct kvmppc_vcpu_book3s *book3s; +#endif +#ifdef CONFIG_PPC_BOOK3S_32 + struct kvmppc_book3s_shadow_vcpu *shadow_vcpu; +#endif + + struct pt_regs regs; + + struct thread_fp_state fp; + +#ifdef CONFIG_SPE + ulong evr[32]; + ulong spefscr; + ulong host_spefscr; + u64 acc; +#endif +#ifdef CONFIG_ALTIVEC + struct thread_vr_state vr; +#endif + +#ifdef CONFIG_KVM_BOOKE_HV + u32 host_mas4; + u32 host_mas6; + u32 shadow_epcr; + u32 shadow_msrp; + u32 eplc; + u32 epsc; + u32 oldpir; +#endif + +#if defined(CONFIG_BOOKE) +#if defined(CONFIG_KVM_BOOKE_HV) || defined(CONFIG_64BIT) + u32 epcr; +#endif +#endif + +#ifdef CONFIG_PPC_BOOK3S + /* For Gekko paired singles */ + u32 qpr[32]; +#endif + +#ifdef CONFIG_PPC_BOOK3S + ulong tar; +#endif + +#ifdef CONFIG_PPC_BOOK3S + ulong hflags; + ulong guest_owned_ext; + ulong purr; + ulong spurr; + ulong ic; + ulong dscr; + ulong amr; + ulong uamor; + ulong iamr; + u32 ctrl; + u32 dabrx; + ulong dabr; + ulong dawr; + ulong dawrx; + ulong ciabr; + ulong cfar; + ulong ppr; + u32 pspb; + ulong fscr; + ulong shadow_fscr; + ulong ebbhr; + ulong ebbrr; + ulong bescr; + ulong csigr; + ulong tacr; + ulong tcscr; + ulong acop; + ulong wort; + ulong tid; + ulong psscr; + ulong hfscr; + ulong shadow_srr1; +#endif + u32 vrsave; /* also USPRG0 */ + u32 mmucr; + /* shadow_msr is unused for BookE HV */ + ulong shadow_msr; + ulong csrr0; + ulong csrr1; + ulong dsrr0; + ulong dsrr1; + ulong mcsrr0; + ulong mcsrr1; + ulong mcsr; + ulong dec; +#ifdef CONFIG_BOOKE + u32 decar; +#endif + /* Time base value when we entered the guest */ + u64 entry_tb; + u64 entry_vtb; + u64 entry_ic; + u32 tcr; + ulong tsr; /* we need to perform set/clr_bits() which requires ulong */ + u32 ivor[64]; + ulong ivpr; + u32 pvr; + + u32 shadow_pid; + u32 shadow_pid1; + u32 pid; + u32 swap_pid; + + u32 ccr0; + u32 ccr1; + u32 dbsr; + + u64 mmcr[4]; /* MMCR0, MMCR1, MMCR2, MMCR3 */ + u64 mmcra; + u64 mmcrs; + u32 pmc[8]; + u32 spmc[2]; + u64 siar; + u64 sdar; + u64 sier[3]; +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + u64 tfhar; + u64 texasr; + u64 tfiar; + u64 orig_texasr; + + u32 cr_tm; + u64 xer_tm; + u64 lr_tm; + u64 ctr_tm; + u64 amr_tm; + u64 ppr_tm; + u64 dscr_tm; + u64 tar_tm; + + ulong gpr_tm[32]; + + struct thread_fp_state fp_tm; + + struct thread_vr_state vr_tm; + u32 vrsave_tm; /* also USPRG0 */ +#endif + +#ifdef CONFIG_KVM_EXIT_TIMING + struct mutex exit_timing_lock; + struct kvmppc_exit_timing timing_exit; + struct kvmppc_exit_timing timing_last_enter; + u32 last_exit_type; + u32 timing_count_type[__NUMBER_OF_KVM_EXIT_TYPES]; + u64 timing_sum_duration[__NUMBER_OF_KVM_EXIT_TYPES]; + u64 timing_sum_quad_duration[__NUMBER_OF_KVM_EXIT_TYPES]; + u64 timing_min_duration[__NUMBER_OF_KVM_EXIT_TYPES]; + u64 timing_max_duration[__NUMBER_OF_KVM_EXIT_TYPES]; + u64 timing_last_exit; + struct dentry *debugfs_exit_timing; +#endif + +#ifdef CONFIG_PPC_BOOK3S + ulong fault_dar; + u32 fault_dsisr; + unsigned long intr_msr; + ulong fault_gpa; /* guest real address of page fault (POWER9) */ +#endif + +#ifdef CONFIG_BOOKE + ulong fault_dear; + ulong fault_esr; + ulong queued_dear; + ulong queued_esr; + spinlock_t wdt_lock; + struct timer_list wdt_timer; + u32 tlbcfg[4]; + u32 tlbps[4]; + u32 mmucfg; + u32 eptcfg; + u32 epr; + u64 sprg9; + u32 pwrmgtcr0; + u32 crit_save; + /* guest debug registers*/ + struct debug_reg dbg_reg; +#endif + gpa_t paddr_accessed; + gva_t vaddr_accessed; + pgd_t *pgdir; + + u16 io_gpr; /* GPR used as IO source/target */ + u8 mmio_host_swabbed; + u8 mmio_sign_extend; + /* conversion between single and double precision */ + u8 mmio_sp64_extend; + /* + * Number of simulations for vsx. + * If we use 2*8bytes to simulate 1*16bytes, + * then the number should be 2 and + * mmio_copy_type=KVMPPC_VSX_COPY_DWORD. + * If we use 4*4bytes to simulate 1*16bytes, + * the number should be 4 and + * mmio_vsx_copy_type=KVMPPC_VSX_COPY_WORD. + */ + u8 mmio_vsx_copy_nums; + u8 mmio_vsx_offset; + u8 mmio_vmx_copy_nums; + u8 mmio_vmx_offset; + u8 mmio_copy_type; + u8 osi_needed; + u8 osi_enabled; + u8 papr_enabled; + u8 watchdog_enabled; + u8 sane; + u8 cpu_type; + u8 hcall_needed; + u8 epr_flags; /* KVMPPC_EPR_xxx */ + u8 epr_needed; + u8 external_oneshot; /* clear external irq after delivery */ + + u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */ + + struct hrtimer dec_timer; + u64 dec_jiffies; + u64 dec_expires; + unsigned long pending_exceptions; + u8 ceded; + u8 prodded; + u8 doorbell_request; + u8 irq_pending; /* Used by XIVE to signal pending guest irqs */ + u32 last_inst; + + struct rcuwait *waitp; + struct kvmppc_vcore *vcore; + int ret; + int trap; + int state; + int ptid; + int thread_cpu; + int prev_cpu; + bool timer_running; + wait_queue_head_t cpu_run; + struct machine_check_event mce_evt; /* Valid if trap == 0x200 */ + + struct kvm_vcpu_arch_shared *shared; +#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_KVM_BOOK3S_PR_POSSIBLE) + bool shared_big_endian; +#endif + unsigned long magic_page_pa; /* phys addr to map the magic page to */ + unsigned long magic_page_ea; /* effect. addr to map the magic page to */ + bool disable_kernel_nx; + + int irq_type; /* one of KVM_IRQ_* */ + int irq_cpu_id; + struct openpic *mpic; /* KVM_IRQ_MPIC */ +#ifdef CONFIG_KVM_XICS + struct kvmppc_icp *icp; /* XICS presentation controller */ + struct kvmppc_xive_vcpu *xive_vcpu; /* XIVE virtual CPU data */ + __be32 xive_cam_word; /* Cooked W2 in proper endian with valid bit */ + u8 xive_pushed; /* Is the VP pushed on the physical CPU ? */ + u8 xive_esc_on; /* Is the escalation irq enabled ? */ + union xive_tma_w01 xive_saved_state; /* W0..1 of XIVE thread state */ + u64 xive_esc_raddr; /* Escalation interrupt ESB real addr */ + u64 xive_esc_vaddr; /* Escalation interrupt ESB virt addr */ +#endif + +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE + struct kvm_vcpu_arch_shared shregs; + + struct mmio_hpte_cache mmio_cache; + unsigned long pgfault_addr; + long pgfault_index; + unsigned long pgfault_hpte[2]; + struct mmio_hpte_cache_entry *pgfault_cache; + + struct task_struct *run_task; + + spinlock_t vpa_update_lock; + struct kvmppc_vpa vpa; + struct kvmppc_vpa dtl; + struct dtl_entry *dtl_ptr; + unsigned long dtl_index; + u64 stolen_logged; + struct kvmppc_vpa slb_shadow; + + spinlock_t tbacct_lock; + u64 busy_stolen; + u64 busy_preempt; + + u32 emul_inst; + + u32 online; + + /* For support of nested guests */ + struct kvm_nested_guest *nested; + u32 nested_vcpu_id; + gpa_t nested_io_gpr; +#endif + +#ifdef CONFIG_KVM_BOOK3S_HV_EXIT_TIMING + struct kvmhv_tb_accumulator *cur_activity; /* What we're timing */ + u64 cur_tb_start; /* when it started */ + struct kvmhv_tb_accumulator rm_entry; /* real-mode entry code */ + struct kvmhv_tb_accumulator rm_intr; /* real-mode intr handling */ + struct kvmhv_tb_accumulator rm_exit; /* real-mode exit code */ + struct kvmhv_tb_accumulator guest_time; /* guest execution */ + struct kvmhv_tb_accumulator cede_time; /* time napping inside guest */ + + struct dentry *debugfs_dir; +#endif /* CONFIG_KVM_BOOK3S_HV_EXIT_TIMING */ +}; + +#define VCPU_FPR(vcpu, i) (vcpu)->arch.fp.fpr[i][TS_FPROFFSET] +#define VCPU_VSX_FPR(vcpu, i, j) ((vcpu)->arch.fp.fpr[i][j]) +#define VCPU_VSX_VR(vcpu, i) ((vcpu)->arch.vr.vr[i]) + +/* Values for vcpu->arch.state */ +#define KVMPPC_VCPU_NOTREADY 0 +#define KVMPPC_VCPU_RUNNABLE 1 +#define KVMPPC_VCPU_BUSY_IN_HOST 2 + +/* Values for vcpu->arch.io_gpr */ +#define KVM_MMIO_REG_MASK 0x003f +#define KVM_MMIO_REG_EXT_MASK 0xffc0 +#define KVM_MMIO_REG_GPR 0x0000 +#define KVM_MMIO_REG_FPR 0x0040 +#define KVM_MMIO_REG_QPR 0x0080 +#define KVM_MMIO_REG_FQPR 0x00c0 +#define KVM_MMIO_REG_VSX 0x0100 +#define KVM_MMIO_REG_VMX 0x0180 +#define KVM_MMIO_REG_NESTED_GPR 0xffc0 + + +#define __KVM_HAVE_ARCH_WQP +#define __KVM_HAVE_CREATE_DEVICE + +static inline void kvm_arch_hardware_disable(void) {} +static inline void kvm_arch_hardware_unsetup(void) {} +static inline void kvm_arch_sync_events(struct kvm *kvm) {} +static inline void kvm_arch_memslots_updated(struct kvm *kvm, u64 gen) {} +static inline void kvm_arch_flush_shadow_all(struct kvm *kvm) {} +static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {} +static inline void kvm_arch_exit(void) {} +static inline void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu) {} +static inline void kvm_arch_vcpu_unblocking(struct kvm_vcpu *vcpu) {} +static inline void kvm_arch_vcpu_block_finish(struct kvm_vcpu *vcpu) {} + +#endif /* __POWERPC_KVM_HOST_H__ */ diff --git a/arch/powerpc/include/asm/kvm_para.h b/arch/powerpc/include/asm/kvm_para.h new file mode 100644 index 000000000..abe1b5e82 --- /dev/null +++ b/arch/powerpc/include/asm/kvm_para.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * + * Copyright IBM Corp. 2008 + * + * Authors: Hollis Blanchard <hollisb@us.ibm.com> + */ +#ifndef __POWERPC_KVM_PARA_H__ +#define __POWERPC_KVM_PARA_H__ + +#include <asm/kvm_guest.h> + +#include <uapi/asm/kvm_para.h> + +static inline int kvm_para_available(void) +{ + return IS_ENABLED(CONFIG_KVM_GUEST) && is_kvm_guest(); +} + +static inline unsigned int kvm_arch_para_features(void) +{ + unsigned long r; + + if (!kvm_para_available()) + return 0; + + if(epapr_hypercall0_1(KVM_HCALL_TOKEN(KVM_HC_FEATURES), &r)) + return 0; + + return r; +} + +static inline unsigned int kvm_arch_para_hints(void) +{ + return 0; +} + +static inline bool kvm_check_and_clear_guest_paused(void) +{ + return false; +} + +#endif /* __POWERPC_KVM_PARA_H__ */ diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h new file mode 100644 index 000000000..0a056c64c --- /dev/null +++ b/arch/powerpc/include/asm/kvm_ppc.h @@ -0,0 +1,1042 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * + * Copyright IBM Corp. 2008 + * + * Authors: Hollis Blanchard <hollisb@us.ibm.com> + */ + +#ifndef __POWERPC_KVM_PPC_H__ +#define __POWERPC_KVM_PPC_H__ + +/* This file exists just so we can dereference kvm_vcpu, avoiding nested header + * dependencies. */ + +#include <linux/mutex.h> +#include <linux/timer.h> +#include <linux/types.h> +#include <linux/kvm_types.h> +#include <linux/kvm_host.h> +#include <linux/bug.h> +#ifdef CONFIG_PPC_BOOK3S +#include <asm/kvm_book3s.h> +#else +#include <asm/kvm_booke.h> +#endif +#ifdef CONFIG_KVM_BOOK3S_64_HANDLER +#include <asm/paca.h> +#include <asm/xive.h> +#include <asm/cpu_has_feature.h> +#endif + +/* + * KVMPPC_INST_SW_BREAKPOINT is debug Instruction + * for supporting software breakpoint. + */ +#define KVMPPC_INST_SW_BREAKPOINT 0x00dddd00 + +enum emulation_result { + EMULATE_DONE, /* no further processing */ + EMULATE_DO_MMIO, /* kvm_run filled with MMIO request */ + EMULATE_FAIL, /* can't emulate this instruction */ + EMULATE_AGAIN, /* something went wrong. go again */ + EMULATE_EXIT_USER, /* emulation requires exit to user-space */ +}; + +enum instruction_fetch_type { + INST_GENERIC, + INST_SC, /* system call */ +}; + +enum xlate_instdata { + XLATE_INST, /* translate instruction address */ + XLATE_DATA /* translate data address */ +}; + +enum xlate_readwrite { + XLATE_READ, /* check for read permissions */ + XLATE_WRITE /* check for write permissions */ +}; + +extern int kvmppc_vcpu_run(struct kvm_vcpu *vcpu); +extern int __kvmppc_vcpu_run(struct kvm_vcpu *vcpu); +extern void kvmppc_handler_highmem(void); + +extern void kvmppc_dump_vcpu(struct kvm_vcpu *vcpu); +extern int kvmppc_handle_load(struct kvm_vcpu *vcpu, + unsigned int rt, unsigned int bytes, + int is_default_endian); +extern int kvmppc_handle_loads(struct kvm_vcpu *vcpu, + unsigned int rt, unsigned int bytes, + int is_default_endian); +extern int kvmppc_handle_vsx_load(struct kvm_vcpu *vcpu, + unsigned int rt, unsigned int bytes, + int is_default_endian, int mmio_sign_extend); +extern int kvmppc_handle_vmx_load(struct kvm_vcpu *vcpu, + unsigned int rt, unsigned int bytes, int is_default_endian); +extern int kvmppc_handle_vmx_store(struct kvm_vcpu *vcpu, + unsigned int rs, unsigned int bytes, int is_default_endian); +extern int kvmppc_handle_store(struct kvm_vcpu *vcpu, + u64 val, unsigned int bytes, + int is_default_endian); +extern int kvmppc_handle_vsx_store(struct kvm_vcpu *vcpu, + int rs, unsigned int bytes, + int is_default_endian); + +extern int kvmppc_load_last_inst(struct kvm_vcpu *vcpu, + enum instruction_fetch_type type, u32 *inst); + +extern int kvmppc_ld(struct kvm_vcpu *vcpu, ulong *eaddr, int size, void *ptr, + bool data); +extern int kvmppc_st(struct kvm_vcpu *vcpu, ulong *eaddr, int size, void *ptr, + bool data); +extern int kvmppc_emulate_instruction(struct kvm_vcpu *vcpu); +extern int kvmppc_emulate_loadstore(struct kvm_vcpu *vcpu); +extern int kvmppc_emulate_mmio(struct kvm_vcpu *vcpu); +extern void kvmppc_emulate_dec(struct kvm_vcpu *vcpu); +extern u32 kvmppc_get_dec(struct kvm_vcpu *vcpu, u64 tb); +extern void kvmppc_decrementer_func(struct kvm_vcpu *vcpu); +extern int kvmppc_sanity_check(struct kvm_vcpu *vcpu); +extern int kvmppc_subarch_vcpu_init(struct kvm_vcpu *vcpu); +extern void kvmppc_subarch_vcpu_uninit(struct kvm_vcpu *vcpu); + +/* Core-specific hooks */ + +extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gpa_t gpaddr, + unsigned int gtlb_idx); +extern void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode); +extern void kvmppc_mmu_switch_pid(struct kvm_vcpu *vcpu, u32 pid); +extern int kvmppc_mmu_dtlb_index(struct kvm_vcpu *vcpu, gva_t eaddr); +extern int kvmppc_mmu_itlb_index(struct kvm_vcpu *vcpu, gva_t eaddr); +extern gpa_t kvmppc_mmu_xlate(struct kvm_vcpu *vcpu, unsigned int gtlb_index, + gva_t eaddr); +extern void kvmppc_mmu_dtlb_miss(struct kvm_vcpu *vcpu); +extern void kvmppc_mmu_itlb_miss(struct kvm_vcpu *vcpu); +extern int kvmppc_xlate(struct kvm_vcpu *vcpu, ulong eaddr, + enum xlate_instdata xlid, enum xlate_readwrite xlrw, + struct kvmppc_pte *pte); + +extern int kvmppc_core_vcpu_create(struct kvm_vcpu *vcpu); +extern void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu); +extern int kvmppc_core_vcpu_setup(struct kvm_vcpu *vcpu); +extern int kvmppc_core_check_processor_compat(void); +extern int kvmppc_core_vcpu_translate(struct kvm_vcpu *vcpu, + struct kvm_translation *tr); + +extern void kvmppc_core_vcpu_load(struct kvm_vcpu *vcpu, int cpu); +extern void kvmppc_core_vcpu_put(struct kvm_vcpu *vcpu); + +extern int kvmppc_core_prepare_to_enter(struct kvm_vcpu *vcpu); +extern int kvmppc_core_pending_dec(struct kvm_vcpu *vcpu); +extern void kvmppc_core_queue_machine_check(struct kvm_vcpu *vcpu, ulong flags); +extern void kvmppc_core_queue_program(struct kvm_vcpu *vcpu, ulong flags); +extern void kvmppc_core_queue_fpunavail(struct kvm_vcpu *vcpu); +extern void kvmppc_core_queue_vec_unavail(struct kvm_vcpu *vcpu); +extern void kvmppc_core_queue_vsx_unavail(struct kvm_vcpu *vcpu); +extern void kvmppc_core_queue_dec(struct kvm_vcpu *vcpu); +extern void kvmppc_core_dequeue_dec(struct kvm_vcpu *vcpu); +extern void kvmppc_core_queue_external(struct kvm_vcpu *vcpu, + struct kvm_interrupt *irq); +extern void kvmppc_core_dequeue_external(struct kvm_vcpu *vcpu); +extern void kvmppc_core_queue_dtlb_miss(struct kvm_vcpu *vcpu, ulong dear_flags, + ulong esr_flags); +extern void kvmppc_core_queue_data_storage(struct kvm_vcpu *vcpu, + ulong dear_flags, + ulong esr_flags); +extern void kvmppc_core_queue_itlb_miss(struct kvm_vcpu *vcpu); +extern void kvmppc_core_queue_inst_storage(struct kvm_vcpu *vcpu, + ulong esr_flags); +extern void kvmppc_core_flush_tlb(struct kvm_vcpu *vcpu); +extern int kvmppc_core_check_requests(struct kvm_vcpu *vcpu); + +extern int kvmppc_booke_init(void); +extern void kvmppc_booke_exit(void); + +extern void kvmppc_core_destroy_mmu(struct kvm_vcpu *vcpu); +extern int kvmppc_kvm_pv(struct kvm_vcpu *vcpu); +extern void kvmppc_map_magic(struct kvm_vcpu *vcpu); + +extern int kvmppc_allocate_hpt(struct kvm_hpt_info *info, u32 order); +extern void kvmppc_set_hpt(struct kvm *kvm, struct kvm_hpt_info *info); +extern long kvmppc_alloc_reset_hpt(struct kvm *kvm, int order); +extern void kvmppc_free_hpt(struct kvm_hpt_info *info); +extern void kvmppc_rmap_reset(struct kvm *kvm); +extern long kvmppc_prepare_vrma(struct kvm *kvm, + struct kvm_userspace_memory_region *mem); +extern void kvmppc_map_vrma(struct kvm_vcpu *vcpu, + struct kvm_memory_slot *memslot, unsigned long porder); +extern int kvmppc_pseries_do_hcall(struct kvm_vcpu *vcpu); +extern long kvm_spapr_tce_attach_iommu_group(struct kvm *kvm, int tablefd, + struct iommu_group *grp); +extern void kvm_spapr_tce_release_iommu_group(struct kvm *kvm, + struct iommu_group *grp); +extern int kvmppc_switch_mmu_to_hpt(struct kvm *kvm); +extern int kvmppc_switch_mmu_to_radix(struct kvm *kvm); +extern void kvmppc_setup_partition_table(struct kvm *kvm); + +extern long kvm_vm_ioctl_create_spapr_tce(struct kvm *kvm, + struct kvm_create_spapr_tce_64 *args); +extern struct kvmppc_spapr_tce_table *kvmppc_find_table( + struct kvm *kvm, unsigned long liobn); +#define kvmppc_ioba_validate(stt, ioba, npages) \ + (iommu_tce_check_ioba((stt)->page_shift, (stt)->offset, \ + (stt)->size, (ioba), (npages)) ? \ + H_PARAMETER : H_SUCCESS) +extern long kvmppc_h_put_tce(struct kvm_vcpu *vcpu, unsigned long liobn, + unsigned long ioba, unsigned long tce); +extern long kvmppc_h_put_tce_indirect(struct kvm_vcpu *vcpu, + unsigned long liobn, unsigned long ioba, + unsigned long tce_list, unsigned long npages); +extern long kvmppc_h_stuff_tce(struct kvm_vcpu *vcpu, + unsigned long liobn, unsigned long ioba, + unsigned long tce_value, unsigned long npages); +extern long kvmppc_h_get_tce(struct kvm_vcpu *vcpu, unsigned long liobn, + unsigned long ioba); +extern struct page *kvm_alloc_hpt_cma(unsigned long nr_pages); +extern void kvm_free_hpt_cma(struct page *page, unsigned long nr_pages); +extern int kvmppc_core_init_vm(struct kvm *kvm); +extern void kvmppc_core_destroy_vm(struct kvm *kvm); +extern void kvmppc_core_free_memslot(struct kvm *kvm, + struct kvm_memory_slot *slot); +extern int kvmppc_core_prepare_memory_region(struct kvm *kvm, + struct kvm_memory_slot *memslot, + const struct kvm_userspace_memory_region *mem, + enum kvm_mr_change change); +extern void kvmppc_core_commit_memory_region(struct kvm *kvm, + const struct kvm_userspace_memory_region *mem, + const struct kvm_memory_slot *old, + const struct kvm_memory_slot *new, + enum kvm_mr_change change); +extern int kvm_vm_ioctl_get_smmu_info(struct kvm *kvm, + struct kvm_ppc_smmu_info *info); +extern void kvmppc_core_flush_memslot(struct kvm *kvm, + struct kvm_memory_slot *memslot); + +extern int kvmppc_bookehv_init(void); +extern void kvmppc_bookehv_exit(void); + +extern int kvmppc_prepare_to_enter(struct kvm_vcpu *vcpu); + +extern int kvm_vm_ioctl_get_htab_fd(struct kvm *kvm, struct kvm_get_htab_fd *); +extern long kvm_vm_ioctl_resize_hpt_prepare(struct kvm *kvm, + struct kvm_ppc_resize_hpt *rhpt); +extern long kvm_vm_ioctl_resize_hpt_commit(struct kvm *kvm, + struct kvm_ppc_resize_hpt *rhpt); + +int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu, struct kvm_interrupt *irq); + +extern int kvm_vm_ioctl_rtas_define_token(struct kvm *kvm, void __user *argp); +extern int kvmppc_rtas_hcall(struct kvm_vcpu *vcpu); +extern void kvmppc_rtas_tokens_free(struct kvm *kvm); + +extern int kvmppc_xics_set_xive(struct kvm *kvm, u32 irq, u32 server, + u32 priority); +extern int kvmppc_xics_get_xive(struct kvm *kvm, u32 irq, u32 *server, + u32 *priority); +extern int kvmppc_xics_int_on(struct kvm *kvm, u32 irq); +extern int kvmppc_xics_int_off(struct kvm *kvm, u32 irq); + +void kvmppc_core_dequeue_debug(struct kvm_vcpu *vcpu); +void kvmppc_core_queue_debug(struct kvm_vcpu *vcpu); + +union kvmppc_one_reg { + u32 wval; + u64 dval; + vector128 vval; + u64 vsxval[2]; + u32 vsx32val[4]; + u16 vsx16val[8]; + u8 vsx8val[16]; + struct { + u64 addr; + u64 length; + } vpaval; + u64 xive_timaval[2]; +}; + +struct kvmppc_ops { + struct module *owner; + int (*get_sregs)(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs); + int (*set_sregs)(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs); + int (*get_one_reg)(struct kvm_vcpu *vcpu, u64 id, + union kvmppc_one_reg *val); + int (*set_one_reg)(struct kvm_vcpu *vcpu, u64 id, + union kvmppc_one_reg *val); + void (*vcpu_load)(struct kvm_vcpu *vcpu, int cpu); + void (*vcpu_put)(struct kvm_vcpu *vcpu); + void (*inject_interrupt)(struct kvm_vcpu *vcpu, int vec, u64 srr1_flags); + void (*set_msr)(struct kvm_vcpu *vcpu, u64 msr); + int (*vcpu_run)(struct kvm_vcpu *vcpu); + int (*vcpu_create)(struct kvm_vcpu *vcpu); + void (*vcpu_free)(struct kvm_vcpu *vcpu); + int (*check_requests)(struct kvm_vcpu *vcpu); + int (*get_dirty_log)(struct kvm *kvm, struct kvm_dirty_log *log); + void (*flush_memslot)(struct kvm *kvm, struct kvm_memory_slot *memslot); + int (*prepare_memory_region)(struct kvm *kvm, + struct kvm_memory_slot *memslot, + const struct kvm_userspace_memory_region *mem, + enum kvm_mr_change change); + void (*commit_memory_region)(struct kvm *kvm, + const struct kvm_userspace_memory_region *mem, + const struct kvm_memory_slot *old, + const struct kvm_memory_slot *new, + enum kvm_mr_change change); + int (*unmap_hva_range)(struct kvm *kvm, unsigned long start, + unsigned long end); + int (*age_hva)(struct kvm *kvm, unsigned long start, unsigned long end); + int (*test_age_hva)(struct kvm *kvm, unsigned long hva); + void (*set_spte_hva)(struct kvm *kvm, unsigned long hva, pte_t pte); + void (*free_memslot)(struct kvm_memory_slot *slot); + int (*init_vm)(struct kvm *kvm); + void (*destroy_vm)(struct kvm *kvm); + int (*get_smmu_info)(struct kvm *kvm, struct kvm_ppc_smmu_info *info); + int (*emulate_op)(struct kvm_vcpu *vcpu, + unsigned int inst, int *advance); + int (*emulate_mtspr)(struct kvm_vcpu *vcpu, int sprn, ulong spr_val); + int (*emulate_mfspr)(struct kvm_vcpu *vcpu, int sprn, ulong *spr_val); + void (*fast_vcpu_kick)(struct kvm_vcpu *vcpu); + long (*arch_vm_ioctl)(struct file *filp, unsigned int ioctl, + unsigned long arg); + int (*hcall_implemented)(unsigned long hcall); + int (*irq_bypass_add_producer)(struct irq_bypass_consumer *, + struct irq_bypass_producer *); + void (*irq_bypass_del_producer)(struct irq_bypass_consumer *, + struct irq_bypass_producer *); + int (*configure_mmu)(struct kvm *kvm, struct kvm_ppc_mmuv3_cfg *cfg); + int (*get_rmmu_info)(struct kvm *kvm, struct kvm_ppc_rmmu_info *info); + int (*set_smt_mode)(struct kvm *kvm, unsigned long mode, + unsigned long flags); + void (*giveup_ext)(struct kvm_vcpu *vcpu, ulong msr); + int (*enable_nested)(struct kvm *kvm); + int (*load_from_eaddr)(struct kvm_vcpu *vcpu, ulong *eaddr, void *ptr, + int size); + int (*store_to_eaddr)(struct kvm_vcpu *vcpu, ulong *eaddr, void *ptr, + int size); + int (*enable_svm)(struct kvm *kvm); + int (*svm_off)(struct kvm *kvm); +}; + +extern struct kvmppc_ops *kvmppc_hv_ops; +extern struct kvmppc_ops *kvmppc_pr_ops; + +static inline int kvmppc_get_last_inst(struct kvm_vcpu *vcpu, + enum instruction_fetch_type type, u32 *inst) +{ + int ret = EMULATE_DONE; + u32 fetched_inst; + + /* Load the instruction manually if it failed to do so in the + * exit path */ + if (vcpu->arch.last_inst == KVM_INST_FETCH_FAILED) + ret = kvmppc_load_last_inst(vcpu, type, &vcpu->arch.last_inst); + + /* Write fetch_failed unswapped if the fetch failed */ + if (ret == EMULATE_DONE) + fetched_inst = kvmppc_need_byteswap(vcpu) ? + swab32(vcpu->arch.last_inst) : + vcpu->arch.last_inst; + else + fetched_inst = vcpu->arch.last_inst; + + *inst = fetched_inst; + return ret; +} + +static inline bool is_kvmppc_hv_enabled(struct kvm *kvm) +{ + return kvm->arch.kvm_ops == kvmppc_hv_ops; +} + +extern int kvmppc_hwrng_present(void); + +/* + * Cuts out inst bits with ordering according to spec. + * That means the leftmost bit is zero. All given bits are included. + */ +static inline u32 kvmppc_get_field(u64 inst, int msb, int lsb) +{ + u32 r; + u32 mask; + + BUG_ON(msb > lsb); + + mask = (1 << (lsb - msb + 1)) - 1; + r = (inst >> (63 - lsb)) & mask; + + return r; +} + +/* + * Replaces inst bits with ordering according to spec. + */ +static inline u32 kvmppc_set_field(u64 inst, int msb, int lsb, int value) +{ + u32 r; + u32 mask; + + BUG_ON(msb > lsb); + + mask = ((1 << (lsb - msb + 1)) - 1) << (63 - lsb); + r = (inst & ~mask) | ((value << (63 - lsb)) & mask); + + return r; +} + +#define one_reg_size(id) \ + (1ul << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT)) + +#define get_reg_val(id, reg) ({ \ + union kvmppc_one_reg __u; \ + switch (one_reg_size(id)) { \ + case 4: __u.wval = (reg); break; \ + case 8: __u.dval = (reg); break; \ + default: BUG(); \ + } \ + __u; \ +}) + + +#define set_reg_val(id, val) ({ \ + u64 __v; \ + switch (one_reg_size(id)) { \ + case 4: __v = (val).wval; break; \ + case 8: __v = (val).dval; break; \ + default: BUG(); \ + } \ + __v; \ +}) + +int kvmppc_core_get_sregs(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs); +int kvmppc_core_set_sregs(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs); + +int kvmppc_get_sregs_ivor(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs); +int kvmppc_set_sregs_ivor(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs); + +int kvm_vcpu_ioctl_get_one_reg(struct kvm_vcpu *vcpu, struct kvm_one_reg *reg); +int kvm_vcpu_ioctl_set_one_reg(struct kvm_vcpu *vcpu, struct kvm_one_reg *reg); +int kvmppc_get_one_reg(struct kvm_vcpu *vcpu, u64 id, union kvmppc_one_reg *); +int kvmppc_set_one_reg(struct kvm_vcpu *vcpu, u64 id, union kvmppc_one_reg *); + +void kvmppc_set_pid(struct kvm_vcpu *vcpu, u32 pid); + +struct openpic; + +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE +extern void kvm_cma_reserve(void) __init; +static inline void kvmppc_set_xics_phys(int cpu, unsigned long addr) +{ + paca_ptrs[cpu]->kvm_hstate.xics_phys = (void __iomem *)addr; +} + +static inline void kvmppc_set_xive_tima(int cpu, + unsigned long phys_addr, + void __iomem *virt_addr) +{ + paca_ptrs[cpu]->kvm_hstate.xive_tima_phys = (void __iomem *)phys_addr; + paca_ptrs[cpu]->kvm_hstate.xive_tima_virt = virt_addr; +} + +static inline u32 kvmppc_get_xics_latch(void) +{ + u32 xirr; + + xirr = get_paca()->kvm_hstate.saved_xirr; + get_paca()->kvm_hstate.saved_xirr = 0; + return xirr; +} + +/* + * To avoid the need to unnecessarily exit fully to the host kernel, an IPI to + * a CPU thread that's running/napping inside of a guest is by default regarded + * as a request to wake the CPU (if needed) and continue execution within the + * guest, potentially to process new state like externally-generated + * interrupts or IPIs sent from within the guest itself (e.g. H_PROD/H_IPI). + * + * To force an exit to the host kernel, kvmppc_set_host_ipi() must be called + * prior to issuing the IPI to set the corresponding 'host_ipi' flag in the + * target CPU's PACA. To avoid unnecessary exits to the host, this flag should + * be immediately cleared via kvmppc_clear_host_ipi() by the IPI handler on + * the receiving side prior to processing the IPI work. + * + * NOTE: + * + * We currently issue an smp_mb() at the beginning of kvmppc_set_host_ipi(). + * This is to guard against sequences such as the following: + * + * CPU + * X: smp_muxed_ipi_set_message(): + * X: smp_mb() + * X: message[RESCHEDULE] = 1 + * X: doorbell_global_ipi(42): + * X: kvmppc_set_host_ipi(42) + * X: ppc_msgsnd_sync()/smp_mb() + * X: ppc_msgsnd() -> 42 + * 42: doorbell_exception(): // from CPU X + * 42: ppc_msgsync() + * 105: smp_muxed_ipi_set_message(): + * 105: smb_mb() + * // STORE DEFERRED DUE TO RE-ORDERING + * --105: message[CALL_FUNCTION] = 1 + * | 105: doorbell_global_ipi(42): + * | 105: kvmppc_set_host_ipi(42) + * | 42: kvmppc_clear_host_ipi(42) + * | 42: smp_ipi_demux_relaxed() + * | 42: // returns to executing guest + * | // RE-ORDERED STORE COMPLETES + * ->105: message[CALL_FUNCTION] = 1 + * 105: ppc_msgsnd_sync()/smp_mb() + * 105: ppc_msgsnd() -> 42 + * 42: local_paca->kvm_hstate.host_ipi == 0 // IPI ignored + * 105: // hangs waiting on 42 to process messages/call_single_queue + * + * We also issue an smp_mb() at the end of kvmppc_clear_host_ipi(). This is + * to guard against sequences such as the following (as well as to create + * a read-side pairing with the barrier in kvmppc_set_host_ipi()): + * + * CPU + * X: smp_muxed_ipi_set_message(): + * X: smp_mb() + * X: message[RESCHEDULE] = 1 + * X: doorbell_global_ipi(42): + * X: kvmppc_set_host_ipi(42) + * X: ppc_msgsnd_sync()/smp_mb() + * X: ppc_msgsnd() -> 42 + * 42: doorbell_exception(): // from CPU X + * 42: ppc_msgsync() + * // STORE DEFERRED DUE TO RE-ORDERING + * -- 42: kvmppc_clear_host_ipi(42) + * | 42: smp_ipi_demux_relaxed() + * | 105: smp_muxed_ipi_set_message(): + * | 105: smb_mb() + * | 105: message[CALL_FUNCTION] = 1 + * | 105: doorbell_global_ipi(42): + * | 105: kvmppc_set_host_ipi(42) + * | // RE-ORDERED STORE COMPLETES + * -> 42: kvmppc_clear_host_ipi(42) + * 42: // returns to executing guest + * 105: ppc_msgsnd_sync()/smp_mb() + * 105: ppc_msgsnd() -> 42 + * 42: local_paca->kvm_hstate.host_ipi == 0 // IPI ignored + * 105: // hangs waiting on 42 to process messages/call_single_queue + */ +static inline void kvmppc_set_host_ipi(int cpu) +{ + /* + * order stores of IPI messages vs. setting of host_ipi flag + * + * pairs with the barrier in kvmppc_clear_host_ipi() + */ + smp_mb(); + paca_ptrs[cpu]->kvm_hstate.host_ipi = 1; +} + +static inline void kvmppc_clear_host_ipi(int cpu) +{ + paca_ptrs[cpu]->kvm_hstate.host_ipi = 0; + /* + * order clearing of host_ipi flag vs. processing of IPI messages + * + * pairs with the barrier in kvmppc_set_host_ipi() + */ + smp_mb(); +} + +static inline void kvmppc_fast_vcpu_kick(struct kvm_vcpu *vcpu) +{ + vcpu->kvm->arch.kvm_ops->fast_vcpu_kick(vcpu); +} + +extern void kvm_hv_vm_activated(void); +extern void kvm_hv_vm_deactivated(void); +extern bool kvm_hv_mode_active(void); + +extern void kvmppc_check_need_tlb_flush(struct kvm *kvm, int pcpu, + struct kvm_nested_guest *nested); + +#else +static inline void __init kvm_cma_reserve(void) +{} + +static inline void kvmppc_set_xics_phys(int cpu, unsigned long addr) +{} + +static inline void kvmppc_set_xive_tima(int cpu, + unsigned long phys_addr, + void __iomem *virt_addr) +{} + +static inline u32 kvmppc_get_xics_latch(void) +{ + return 0; +} + +static inline void kvmppc_set_host_ipi(int cpu) +{} + +static inline void kvmppc_clear_host_ipi(int cpu) +{} + +static inline void kvmppc_fast_vcpu_kick(struct kvm_vcpu *vcpu) +{ + kvm_vcpu_kick(vcpu); +} + +static inline bool kvm_hv_mode_active(void) { return false; } + +#endif + +#ifdef CONFIG_KVM_XICS +static inline int kvmppc_xics_enabled(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.irq_type == KVMPPC_IRQ_XICS; +} + +static inline struct kvmppc_passthru_irqmap *kvmppc_get_passthru_irqmap( + struct kvm *kvm) +{ + if (kvm && kvm_irq_bypass) + return kvm->arch.pimap; + return NULL; +} + +extern void kvmppc_alloc_host_rm_ops(void); +extern void kvmppc_free_host_rm_ops(void); +extern void kvmppc_free_pimap(struct kvm *kvm); +extern int kvmppc_xics_rm_complete(struct kvm_vcpu *vcpu, u32 hcall); +extern void kvmppc_xics_free_icp(struct kvm_vcpu *vcpu); +extern int kvmppc_xics_hcall(struct kvm_vcpu *vcpu, u32 cmd); +extern u64 kvmppc_xics_get_icp(struct kvm_vcpu *vcpu); +extern int kvmppc_xics_set_icp(struct kvm_vcpu *vcpu, u64 icpval); +extern int kvmppc_xics_connect_vcpu(struct kvm_device *dev, + struct kvm_vcpu *vcpu, u32 cpu); +extern void kvmppc_xics_ipi_action(void); +extern void kvmppc_xics_set_mapped(struct kvm *kvm, unsigned long guest_irq, + unsigned long host_irq); +extern void kvmppc_xics_clr_mapped(struct kvm *kvm, unsigned long guest_irq, + unsigned long host_irq); +extern long kvmppc_deliver_irq_passthru(struct kvm_vcpu *vcpu, __be32 xirr, + struct kvmppc_irq_map *irq_map, + struct kvmppc_passthru_irqmap *pimap, + bool *again); + +extern int kvmppc_xics_set_irq(struct kvm *kvm, int irq_source_id, u32 irq, + int level, bool line_status); + +extern int h_ipi_redirect; +#else +static inline struct kvmppc_passthru_irqmap *kvmppc_get_passthru_irqmap( + struct kvm *kvm) + { return NULL; } +static inline void kvmppc_alloc_host_rm_ops(void) {}; +static inline void kvmppc_free_host_rm_ops(void) {}; +static inline void kvmppc_free_pimap(struct kvm *kvm) {}; +static inline int kvmppc_xics_rm_complete(struct kvm_vcpu *vcpu, u32 hcall) + { return 0; } +static inline int kvmppc_xics_enabled(struct kvm_vcpu *vcpu) + { return 0; } +static inline void kvmppc_xics_free_icp(struct kvm_vcpu *vcpu) { } +static inline int kvmppc_xics_hcall(struct kvm_vcpu *vcpu, u32 cmd) + { return 0; } +#endif + +#ifdef CONFIG_KVM_XIVE +/* + * Below the first "xive" is the "eXternal Interrupt Virtualization Engine" + * ie. P9 new interrupt controller, while the second "xive" is the legacy + * "eXternal Interrupt Vector Entry" which is the configuration of an + * interrupt on the "xics" interrupt controller on P8 and earlier. Those + * two function consume or produce a legacy "XIVE" state from the + * new "XIVE" interrupt controller. + */ +extern int kvmppc_xive_set_xive(struct kvm *kvm, u32 irq, u32 server, + u32 priority); +extern int kvmppc_xive_get_xive(struct kvm *kvm, u32 irq, u32 *server, + u32 *priority); +extern int kvmppc_xive_int_on(struct kvm *kvm, u32 irq); +extern int kvmppc_xive_int_off(struct kvm *kvm, u32 irq); +extern void kvmppc_xive_init_module(void); +extern void kvmppc_xive_exit_module(void); + +extern int kvmppc_xive_connect_vcpu(struct kvm_device *dev, + struct kvm_vcpu *vcpu, u32 cpu); +extern void kvmppc_xive_cleanup_vcpu(struct kvm_vcpu *vcpu); +extern int kvmppc_xive_set_mapped(struct kvm *kvm, unsigned long guest_irq, + struct irq_desc *host_desc); +extern int kvmppc_xive_clr_mapped(struct kvm *kvm, unsigned long guest_irq, + struct irq_desc *host_desc); +extern u64 kvmppc_xive_get_icp(struct kvm_vcpu *vcpu); +extern int kvmppc_xive_set_icp(struct kvm_vcpu *vcpu, u64 icpval); + +extern int kvmppc_xive_set_irq(struct kvm *kvm, int irq_source_id, u32 irq, + int level, bool line_status); +extern void kvmppc_xive_push_vcpu(struct kvm_vcpu *vcpu); + +static inline int kvmppc_xive_enabled(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.irq_type == KVMPPC_IRQ_XIVE; +} + +extern int kvmppc_xive_native_connect_vcpu(struct kvm_device *dev, + struct kvm_vcpu *vcpu, u32 cpu); +extern void kvmppc_xive_native_cleanup_vcpu(struct kvm_vcpu *vcpu); +extern void kvmppc_xive_native_init_module(void); +extern void kvmppc_xive_native_exit_module(void); +extern int kvmppc_xive_native_get_vp(struct kvm_vcpu *vcpu, + union kvmppc_one_reg *val); +extern int kvmppc_xive_native_set_vp(struct kvm_vcpu *vcpu, + union kvmppc_one_reg *val); +extern bool kvmppc_xive_native_supported(void); + +#else +static inline int kvmppc_xive_set_xive(struct kvm *kvm, u32 irq, u32 server, + u32 priority) { return -1; } +static inline int kvmppc_xive_get_xive(struct kvm *kvm, u32 irq, u32 *server, + u32 *priority) { return -1; } +static inline int kvmppc_xive_int_on(struct kvm *kvm, u32 irq) { return -1; } +static inline int kvmppc_xive_int_off(struct kvm *kvm, u32 irq) { return -1; } +static inline void kvmppc_xive_init_module(void) { } +static inline void kvmppc_xive_exit_module(void) { } + +static inline int kvmppc_xive_connect_vcpu(struct kvm_device *dev, + struct kvm_vcpu *vcpu, u32 cpu) { return -EBUSY; } +static inline void kvmppc_xive_cleanup_vcpu(struct kvm_vcpu *vcpu) { } +static inline int kvmppc_xive_set_mapped(struct kvm *kvm, unsigned long guest_irq, + struct irq_desc *host_desc) { return -ENODEV; } +static inline int kvmppc_xive_clr_mapped(struct kvm *kvm, unsigned long guest_irq, + struct irq_desc *host_desc) { return -ENODEV; } +static inline u64 kvmppc_xive_get_icp(struct kvm_vcpu *vcpu) { return 0; } +static inline int kvmppc_xive_set_icp(struct kvm_vcpu *vcpu, u64 icpval) { return -ENOENT; } + +static inline int kvmppc_xive_set_irq(struct kvm *kvm, int irq_source_id, u32 irq, + int level, bool line_status) { return -ENODEV; } +static inline void kvmppc_xive_push_vcpu(struct kvm_vcpu *vcpu) { } + +static inline int kvmppc_xive_enabled(struct kvm_vcpu *vcpu) + { return 0; } +static inline int kvmppc_xive_native_connect_vcpu(struct kvm_device *dev, + struct kvm_vcpu *vcpu, u32 cpu) { return -EBUSY; } +static inline void kvmppc_xive_native_cleanup_vcpu(struct kvm_vcpu *vcpu) { } +static inline void kvmppc_xive_native_init_module(void) { } +static inline void kvmppc_xive_native_exit_module(void) { } +static inline int kvmppc_xive_native_get_vp(struct kvm_vcpu *vcpu, + union kvmppc_one_reg *val) +{ return 0; } +static inline int kvmppc_xive_native_set_vp(struct kvm_vcpu *vcpu, + union kvmppc_one_reg *val) +{ return -ENOENT; } + +#endif /* CONFIG_KVM_XIVE */ + +#if defined(CONFIG_PPC_POWERNV) && defined(CONFIG_KVM_BOOK3S_64_HANDLER) +static inline bool xics_on_xive(void) +{ + return xive_enabled() && cpu_has_feature(CPU_FTR_HVMODE); +} +#else +static inline bool xics_on_xive(void) +{ + return false; +} +#endif + +/* + * Prototypes for functions called only from assembler code. + * Having prototypes reduces sparse errors. + */ +long kvmppc_rm_h_put_tce(struct kvm_vcpu *vcpu, unsigned long liobn, + unsigned long ioba, unsigned long tce); +long kvmppc_rm_h_put_tce_indirect(struct kvm_vcpu *vcpu, + unsigned long liobn, unsigned long ioba, + unsigned long tce_list, unsigned long npages); +long kvmppc_rm_h_stuff_tce(struct kvm_vcpu *vcpu, + unsigned long liobn, unsigned long ioba, + unsigned long tce_value, unsigned long npages); +long int kvmppc_rm_h_confer(struct kvm_vcpu *vcpu, int target, + unsigned int yield_count); +long kvmppc_h_random(struct kvm_vcpu *vcpu); +void kvmhv_commence_exit(int trap); +void kvmppc_realmode_machine_check(struct kvm_vcpu *vcpu); +void kvmppc_subcore_enter_guest(void); +void kvmppc_subcore_exit_guest(void); +long kvmppc_realmode_hmi_handler(void); +long kvmppc_h_enter(struct kvm_vcpu *vcpu, unsigned long flags, + long pte_index, unsigned long pteh, unsigned long ptel); +long kvmppc_h_remove(struct kvm_vcpu *vcpu, unsigned long flags, + unsigned long pte_index, unsigned long avpn); +long kvmppc_h_bulk_remove(struct kvm_vcpu *vcpu); +long kvmppc_h_protect(struct kvm_vcpu *vcpu, unsigned long flags, + unsigned long pte_index, unsigned long avpn, + unsigned long va); +long kvmppc_h_read(struct kvm_vcpu *vcpu, unsigned long flags, + unsigned long pte_index); +long kvmppc_h_clear_ref(struct kvm_vcpu *vcpu, unsigned long flags, + unsigned long pte_index); +long kvmppc_h_clear_mod(struct kvm_vcpu *vcpu, unsigned long flags, + unsigned long pte_index); +long kvmppc_rm_h_page_init(struct kvm_vcpu *vcpu, unsigned long flags, + unsigned long dest, unsigned long src); +long kvmppc_hpte_hv_fault(struct kvm_vcpu *vcpu, unsigned long addr, + unsigned long slb_v, unsigned int status, bool data); +unsigned long kvmppc_rm_h_xirr(struct kvm_vcpu *vcpu); +unsigned long kvmppc_rm_h_xirr_x(struct kvm_vcpu *vcpu); +unsigned long kvmppc_rm_h_ipoll(struct kvm_vcpu *vcpu, unsigned long server); +int kvmppc_rm_h_ipi(struct kvm_vcpu *vcpu, unsigned long server, + unsigned long mfrr); +int kvmppc_rm_h_cppr(struct kvm_vcpu *vcpu, unsigned long cppr); +int kvmppc_rm_h_eoi(struct kvm_vcpu *vcpu, unsigned long xirr); +void kvmppc_guest_entry_inject_int(struct kvm_vcpu *vcpu); + +/* + * Host-side operations we want to set up while running in real + * mode in the guest operating on the xics. + * Currently only VCPU wakeup is supported. + */ + +union kvmppc_rm_state { + unsigned long raw; + struct { + u32 in_host; + u32 rm_action; + }; +}; + +struct kvmppc_host_rm_core { + union kvmppc_rm_state rm_state; + void *rm_data; + char pad[112]; +}; + +struct kvmppc_host_rm_ops { + struct kvmppc_host_rm_core *rm_core; + void (*vcpu_kick)(struct kvm_vcpu *vcpu); +}; + +extern struct kvmppc_host_rm_ops *kvmppc_host_rm_ops_hv; + +static inline unsigned long kvmppc_get_epr(struct kvm_vcpu *vcpu) +{ +#ifdef CONFIG_KVM_BOOKE_HV + return mfspr(SPRN_GEPR); +#elif defined(CONFIG_BOOKE) + return vcpu->arch.epr; +#else + return 0; +#endif +} + +static inline void kvmppc_set_epr(struct kvm_vcpu *vcpu, u32 epr) +{ +#ifdef CONFIG_KVM_BOOKE_HV + mtspr(SPRN_GEPR, epr); +#elif defined(CONFIG_BOOKE) + vcpu->arch.epr = epr; +#endif +} + +#ifdef CONFIG_KVM_MPIC + +void kvmppc_mpic_set_epr(struct kvm_vcpu *vcpu); +int kvmppc_mpic_connect_vcpu(struct kvm_device *dev, struct kvm_vcpu *vcpu, + u32 cpu); +void kvmppc_mpic_disconnect_vcpu(struct openpic *opp, struct kvm_vcpu *vcpu); + +#else + +static inline void kvmppc_mpic_set_epr(struct kvm_vcpu *vcpu) +{ +} + +static inline int kvmppc_mpic_connect_vcpu(struct kvm_device *dev, + struct kvm_vcpu *vcpu, u32 cpu) +{ + return -EINVAL; +} + +static inline void kvmppc_mpic_disconnect_vcpu(struct openpic *opp, + struct kvm_vcpu *vcpu) +{ +} + +#endif /* CONFIG_KVM_MPIC */ + +int kvm_vcpu_ioctl_config_tlb(struct kvm_vcpu *vcpu, + struct kvm_config_tlb *cfg); +int kvm_vcpu_ioctl_dirty_tlb(struct kvm_vcpu *vcpu, + struct kvm_dirty_tlb *cfg); + +long kvmppc_alloc_lpid(void); +void kvmppc_claim_lpid(long lpid); +void kvmppc_free_lpid(long lpid); +void kvmppc_init_lpid(unsigned long nr_lpids); + +static inline void kvmppc_mmu_flush_icache(kvm_pfn_t pfn) +{ + struct page *page; + /* + * We can only access pages that the kernel maps + * as memory. Bail out for unmapped ones. + */ + if (!pfn_valid(pfn)) + return; + + /* Clear i-cache for new pages */ + page = pfn_to_page(pfn); + if (!test_bit(PG_arch_1, &page->flags)) { + flush_dcache_icache_page(page); + set_bit(PG_arch_1, &page->flags); + } +} + +/* + * Shared struct helpers. The shared struct can be little or big endian, + * depending on the guest endianness. So expose helpers to all of them. + */ +static inline bool kvmppc_shared_big_endian(struct kvm_vcpu *vcpu) +{ +#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_KVM_BOOK3S_PR_POSSIBLE) + /* Only Book3S_64 PR supports bi-endian for now */ + return vcpu->arch.shared_big_endian; +#elif defined(CONFIG_PPC_BOOK3S_64) && defined(__LITTLE_ENDIAN__) + /* Book3s_64 HV on little endian is always little endian */ + return false; +#else + return true; +#endif +} + +#define SPRNG_WRAPPER_GET(reg, bookehv_spr) \ +static inline ulong kvmppc_get_##reg(struct kvm_vcpu *vcpu) \ +{ \ + return mfspr(bookehv_spr); \ +} \ + +#define SPRNG_WRAPPER_SET(reg, bookehv_spr) \ +static inline void kvmppc_set_##reg(struct kvm_vcpu *vcpu, ulong val) \ +{ \ + mtspr(bookehv_spr, val); \ +} \ + +#define SHARED_WRAPPER_GET(reg, size) \ +static inline u##size kvmppc_get_##reg(struct kvm_vcpu *vcpu) \ +{ \ + if (kvmppc_shared_big_endian(vcpu)) \ + return be##size##_to_cpu(vcpu->arch.shared->reg); \ + else \ + return le##size##_to_cpu(vcpu->arch.shared->reg); \ +} \ + +#define SHARED_WRAPPER_SET(reg, size) \ +static inline void kvmppc_set_##reg(struct kvm_vcpu *vcpu, u##size val) \ +{ \ + if (kvmppc_shared_big_endian(vcpu)) \ + vcpu->arch.shared->reg = cpu_to_be##size(val); \ + else \ + vcpu->arch.shared->reg = cpu_to_le##size(val); \ +} \ + +#define SHARED_WRAPPER(reg, size) \ + SHARED_WRAPPER_GET(reg, size) \ + SHARED_WRAPPER_SET(reg, size) \ + +#define SPRNG_WRAPPER(reg, bookehv_spr) \ + SPRNG_WRAPPER_GET(reg, bookehv_spr) \ + SPRNG_WRAPPER_SET(reg, bookehv_spr) \ + +#ifdef CONFIG_KVM_BOOKE_HV + +#define SHARED_SPRNG_WRAPPER(reg, size, bookehv_spr) \ + SPRNG_WRAPPER(reg, bookehv_spr) \ + +#else + +#define SHARED_SPRNG_WRAPPER(reg, size, bookehv_spr) \ + SHARED_WRAPPER(reg, size) \ + +#endif + +SHARED_WRAPPER(critical, 64) +SHARED_SPRNG_WRAPPER(sprg0, 64, SPRN_GSPRG0) +SHARED_SPRNG_WRAPPER(sprg1, 64, SPRN_GSPRG1) +SHARED_SPRNG_WRAPPER(sprg2, 64, SPRN_GSPRG2) +SHARED_SPRNG_WRAPPER(sprg3, 64, SPRN_GSPRG3) +SHARED_SPRNG_WRAPPER(srr0, 64, SPRN_GSRR0) +SHARED_SPRNG_WRAPPER(srr1, 64, SPRN_GSRR1) +SHARED_SPRNG_WRAPPER(dar, 64, SPRN_GDEAR) +SHARED_SPRNG_WRAPPER(esr, 64, SPRN_GESR) +SHARED_WRAPPER_GET(msr, 64) +static inline void kvmppc_set_msr_fast(struct kvm_vcpu *vcpu, u64 val) +{ + if (kvmppc_shared_big_endian(vcpu)) + vcpu->arch.shared->msr = cpu_to_be64(val); + else + vcpu->arch.shared->msr = cpu_to_le64(val); +} +SHARED_WRAPPER(dsisr, 32) +SHARED_WRAPPER(int_pending, 32) +SHARED_WRAPPER(sprg4, 64) +SHARED_WRAPPER(sprg5, 64) +SHARED_WRAPPER(sprg6, 64) +SHARED_WRAPPER(sprg7, 64) + +static inline u32 kvmppc_get_sr(struct kvm_vcpu *vcpu, int nr) +{ + if (kvmppc_shared_big_endian(vcpu)) + return be32_to_cpu(vcpu->arch.shared->sr[nr]); + else + return le32_to_cpu(vcpu->arch.shared->sr[nr]); +} + +static inline void kvmppc_set_sr(struct kvm_vcpu *vcpu, int nr, u32 val) +{ + if (kvmppc_shared_big_endian(vcpu)) + vcpu->arch.shared->sr[nr] = cpu_to_be32(val); + else + vcpu->arch.shared->sr[nr] = cpu_to_le32(val); +} + +/* + * Please call after prepare_to_enter. This function puts the lazy ee and irq + * disabled tracking state back to normal mode, without actually enabling + * interrupts. + */ +static inline void kvmppc_fix_ee_before_entry(void) +{ + trace_hardirqs_on(); + +#ifdef CONFIG_PPC64 + /* + * To avoid races, the caller must have gone directly from having + * interrupts fully-enabled to hard-disabled. + */ + WARN_ON(local_paca->irq_happened != PACA_IRQ_HARD_DIS); + + /* Only need to enable IRQs by hard enabling them after this */ + local_paca->irq_happened = 0; + irq_soft_mask_set(IRQS_ENABLED); +#endif +} + +static inline ulong kvmppc_get_ea_indexed(struct kvm_vcpu *vcpu, int ra, int rb) +{ + ulong ea; + ulong msr_64bit = 0; + + ea = kvmppc_get_gpr(vcpu, rb); + if (ra) + ea += kvmppc_get_gpr(vcpu, ra); + +#if defined(CONFIG_PPC_BOOK3E_64) + msr_64bit = MSR_CM; +#elif defined(CONFIG_PPC_BOOK3S_64) + msr_64bit = MSR_SF; +#endif + + if (!(kvmppc_get_msr(vcpu) & msr_64bit)) + ea = (uint32_t)ea; + + return ea; +} + +extern void xics_wake_cpu(int cpu); + +#endif /* __POWERPC_KVM_PPC_H__ */ diff --git a/arch/powerpc/include/asm/libata-portmap.h b/arch/powerpc/include/asm/libata-portmap.h new file mode 100644 index 000000000..7c602da62 --- /dev/null +++ b/arch/powerpc/include/asm/libata-portmap.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_POWERPC_LIBATA_PORTMAP_H +#define __ASM_POWERPC_LIBATA_PORTMAP_H + +#define ATA_PRIMARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 0) + +#define ATA_SECONDARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 1) + +#endif diff --git a/arch/powerpc/include/asm/linkage.h b/arch/powerpc/include/asm/linkage.h new file mode 100644 index 000000000..1f00d2891 --- /dev/null +++ b/arch/powerpc/include/asm/linkage.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_LINKAGE_H +#define _ASM_POWERPC_LINKAGE_H + +#include <asm/types.h> + +#ifdef PPC64_ELF_ABI_v1 +#define cond_syscall(x) \ + asm ("\t.weak " #x "\n\t.set " #x ", sys_ni_syscall\n" \ + "\t.weak ." #x "\n\t.set ." #x ", .sys_ni_syscall\n") +#define SYSCALL_ALIAS(alias, name) \ + asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n" \ + "\t.globl ." #alias "\n\t.set ." #alias ", ." #name) +#endif + +#endif /* _ASM_POWERPC_LINKAGE_H */ diff --git a/arch/powerpc/include/asm/livepatch.h b/arch/powerpc/include/asm/livepatch.h new file mode 100644 index 000000000..4a3d5d25f --- /dev/null +++ b/arch/powerpc/include/asm/livepatch.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * livepatch.h - powerpc-specific Kernel Live Patching Core + * + * Copyright (C) 2015-2016, SUSE, IBM Corp. + */ +#ifndef _ASM_POWERPC_LIVEPATCH_H +#define _ASM_POWERPC_LIVEPATCH_H + +#include <linux/module.h> +#include <linux/ftrace.h> +#include <linux/sched/task_stack.h> + +#ifdef CONFIG_LIVEPATCH +static inline void klp_arch_set_pc(struct pt_regs *regs, unsigned long ip) +{ + regs->nip = ip; +} + +#define klp_get_ftrace_location klp_get_ftrace_location +static inline unsigned long klp_get_ftrace_location(unsigned long faddr) +{ + /* + * Live patch works only with -mprofile-kernel on PPC. In this case, + * the ftrace location is always within the first 16 bytes. + */ + return ftrace_location_range(faddr, faddr + 16); +} + +static inline void klp_init_thread_info(struct task_struct *p) +{ + /* + 1 to account for STACK_END_MAGIC */ + task_thread_info(p)->livepatch_sp = end_of_stack(p) + 1; +} +#else +static inline void klp_init_thread_info(struct task_struct *p) { } +#endif /* CONFIG_LIVEPATCH */ + +#endif /* _ASM_POWERPC_LIVEPATCH_H */ diff --git a/arch/powerpc/include/asm/local.h b/arch/powerpc/include/asm/local.h new file mode 100644 index 000000000..bc4bd19b7 --- /dev/null +++ b/arch/powerpc/include/asm/local.h @@ -0,0 +1,148 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ARCH_POWERPC_LOCAL_H +#define _ARCH_POWERPC_LOCAL_H + +#ifdef CONFIG_PPC_BOOK3S_64 + +#include <linux/percpu.h> +#include <linux/atomic.h> +#include <linux/irqflags.h> + +#include <asm/hw_irq.h> + +typedef struct +{ + long v; +} local_t; + +#define LOCAL_INIT(i) { (i) } + +static __inline__ long local_read(const local_t *l) +{ + return READ_ONCE(l->v); +} + +static __inline__ void local_set(local_t *l, long i) +{ + WRITE_ONCE(l->v, i); +} + +#define LOCAL_OP(op, c_op) \ +static __inline__ void local_##op(long i, local_t *l) \ +{ \ + unsigned long flags; \ + \ + powerpc_local_irq_pmu_save(flags); \ + l->v c_op i; \ + powerpc_local_irq_pmu_restore(flags); \ +} + +#define LOCAL_OP_RETURN(op, c_op) \ +static __inline__ long local_##op##_return(long a, local_t *l) \ +{ \ + long t; \ + unsigned long flags; \ + \ + powerpc_local_irq_pmu_save(flags); \ + t = (l->v c_op a); \ + powerpc_local_irq_pmu_restore(flags); \ + \ + return t; \ +} + +#define LOCAL_OPS(op, c_op) \ + LOCAL_OP(op, c_op) \ + LOCAL_OP_RETURN(op, c_op) + +LOCAL_OPS(add, +=) +LOCAL_OPS(sub, -=) + +#define local_add_negative(a, l) (local_add_return((a), (l)) < 0) +#define local_inc_return(l) local_add_return(1LL, l) +#define local_inc(l) local_inc_return(l) + +/* + * local_inc_and_test - increment and test + * @l: pointer of type local_t + * + * Atomically increments @l by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define local_inc_and_test(l) (local_inc_return(l) == 0) + +#define local_dec_return(l) local_sub_return(1LL, l) +#define local_dec(l) local_dec_return(l) +#define local_sub_and_test(a, l) (local_sub_return((a), (l)) == 0) +#define local_dec_and_test(l) (local_dec_return((l)) == 0) + +static __inline__ long local_cmpxchg(local_t *l, long o, long n) +{ + long t; + unsigned long flags; + + powerpc_local_irq_pmu_save(flags); + t = l->v; + if (t == o) + l->v = n; + powerpc_local_irq_pmu_restore(flags); + + return t; +} + +static __inline__ long local_xchg(local_t *l, long n) +{ + long t; + unsigned long flags; + + powerpc_local_irq_pmu_save(flags); + t = l->v; + l->v = n; + powerpc_local_irq_pmu_restore(flags); + + return t; +} + +/** + * local_add_unless - add unless the number is a given value + * @l: pointer of type local_t + * @a: the amount to add to v... + * @u: ...unless v is equal to u. + * + * Atomically adds @a to @l, so long as it was not @u. + * Returns non-zero if @l was not @u, and zero otherwise. + */ +static __inline__ int local_add_unless(local_t *l, long a, long u) +{ + unsigned long flags; + int ret = 0; + + powerpc_local_irq_pmu_save(flags); + if (l->v != u) { + l->v += a; + ret = 1; + } + powerpc_local_irq_pmu_restore(flags); + + return ret; +} + +#define local_inc_not_zero(l) local_add_unless((l), 1, 0) + +/* Use these for per-cpu local_t variables: on some archs they are + * much more efficient than these naive implementations. Note they take + * a variable, not an address. + */ + +#define __local_inc(l) ((l)->v++) +#define __local_dec(l) ((l)->v++) +#define __local_add(i,l) ((l)->v+=(i)) +#define __local_sub(i,l) ((l)->v-=(i)) + +#else /* CONFIG_PPC64 */ + +#include <asm-generic/local.h> + +#endif /* CONFIG_PPC64 */ + +#endif /* _ARCH_POWERPC_LOCAL_H */ diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h new file mode 100644 index 000000000..1412e6431 --- /dev/null +++ b/arch/powerpc/include/asm/lppaca.h @@ -0,0 +1,163 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * lppaca.h + * Copyright (C) 2001 Mike Corrigan IBM Corporation + */ +#ifndef _ASM_POWERPC_LPPACA_H +#define _ASM_POWERPC_LPPACA_H + +/* + * The below VPHN macros are outside the __KERNEL__ check since these are + * used for compiling the vphn selftest in userspace + */ + +/* The H_HOME_NODE_ASSOCIATIVITY h_call returns 6 64-bit registers. */ +#define VPHN_REGISTER_COUNT 6 + +/* + * 6 64-bit registers unpacked into up to 24 be32 associativity values. To + * form the complete property we have to add the length in the first cell. + */ +#define VPHN_ASSOC_BUFSIZE (VPHN_REGISTER_COUNT*sizeof(u64)/sizeof(u16) + 1) + +/* + * The H_HOME_NODE_ASSOCIATIVITY hcall takes two values for flags: + * 1 for retrieving associativity information for a guest cpu + * 2 for retrieving associativity information for a host/hypervisor cpu + */ +#define VPHN_FLAG_VCPU 1 +#define VPHN_FLAG_PCPU 2 + +#ifdef __KERNEL__ + +/* + * These definitions relate to hypervisors that only exist when using + * a server type processor + */ +#ifdef CONFIG_PPC_BOOK3S + +/* + * This control block contains the data that is shared between the + * hypervisor and the OS. + */ +#include <linux/cache.h> +#include <linux/threads.h> +#include <asm/types.h> +#include <asm/mmu.h> +#include <asm/firmware.h> +#include <asm/paca.h> + +/* + * The lppaca is the "virtual processor area" registered with the hypervisor, + * H_REGISTER_VPA etc. + * + * According to PAPR, the structure is 640 bytes long, must be L1 cache line + * aligned, and must not cross a 4kB boundary. Its size field must be at + * least 640 bytes (but may be more). + * + * Pre-v4.14 KVM hypervisors reject the VPA if its size field is smaller than + * 1kB, so we dynamically allocate 1kB and advertise size as 1kB, but keep + * this structure as the canonical 640 byte size. + */ +struct lppaca { + /* cacheline 1 contains read-only data */ + + __be32 desc; /* Eye catcher 0xD397D781 */ + __be16 size; /* Size of this struct */ + u8 reserved1[3]; + u8 __old_status; /* Old status, including shared proc */ + u8 reserved3[14]; + volatile __be32 dyn_hw_node_id; /* Dynamic hardware node id */ + volatile __be32 dyn_hw_proc_id; /* Dynamic hardware proc id */ + u8 reserved4[56]; + volatile u8 vphn_assoc_counts[8]; /* Virtual processor home node */ + /* associativity change counters */ + u8 reserved5[32]; + + /* cacheline 2 contains local read-write data */ + + u8 reserved6[48]; + u8 cede_latency_hint; + u8 ebb_regs_in_use; + u8 reserved7[6]; + u8 dtl_enable_mask; /* Dispatch Trace Log mask */ + u8 donate_dedicated_cpu; /* Donate dedicated CPU cycles */ + u8 fpregs_in_use; + u8 pmcregs_in_use; + u8 reserved8[28]; + __be64 wait_state_cycles; /* Wait cycles for this proc */ + u8 reserved9[28]; + __be16 slb_count; /* # of SLBs to maintain */ + u8 idle; /* Indicate OS is idle */ + u8 vmxregs_in_use; + + /* cacheline 3 is shared with other processors */ + + /* + * This is the yield_count. An "odd" value (low bit on) means that + * the processor is yielded (either because of an OS yield or a + * hypervisor preempt). An even value implies that the processor is + * currently executing. + * NOTE: Even dedicated processor partitions can yield so this + * field cannot be used to determine if we are shared or dedicated. + */ + volatile __be32 yield_count; + volatile __be32 dispersion_count; /* dispatch changed physical cpu */ + volatile __be64 cmo_faults; /* CMO page fault count */ + volatile __be64 cmo_fault_time; /* CMO page fault time */ + u8 reserved10[104]; + + /* cacheline 4-5 */ + + __be32 page_ins; /* CMO Hint - # page ins by OS */ + u8 reserved11[148]; + volatile __be64 dtl_idx; /* Dispatch Trace Log head index */ + u8 reserved12[96]; +} ____cacheline_aligned; + +#define lppaca_of(cpu) (*paca_ptrs[cpu]->lppaca_ptr) + +/* + * We are using a non architected field to determine if a partition is + * shared or dedicated. This currently works on both KVM and PHYP, but + * we will have to transition to something better. + */ +#define LPPACA_OLD_SHARED_PROC 2 + +#ifdef CONFIG_PPC_PSERIES +/* + * All CPUs should have the same shared proc value, so directly access the PACA + * to avoid false positives from DEBUG_PREEMPT. + */ +static inline bool lppaca_shared_proc(void) +{ + struct lppaca *l = local_paca->lppaca_ptr; + + if (!firmware_has_feature(FW_FEATURE_SPLPAR)) + return false; + return !!(l->__old_status & LPPACA_OLD_SHARED_PROC); +} + +#define get_lppaca() (get_paca()->lppaca_ptr) +#endif + +/* + * SLB shadow buffer structure as defined in the PAPR. The save_area + * contains adjacent ESID and VSID pairs for each shadowed SLB. The + * ESID is stored in the lower 64bits, then the VSID. + */ +struct slb_shadow { + __be32 persistent; /* Number of persistent SLBs */ + __be32 buffer_length; /* Total shadow buffer length */ + __be64 reserved; + struct { + __be64 esid; + __be64 vsid; + } save_area[SLB_NUM_BOLTED]; +} ____cacheline_aligned; + +extern long hcall_vphn(unsigned long cpu, u64 flags, __be32 *associativity); + +#endif /* CONFIG_PPC_BOOK3S */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_LPPACA_H */ diff --git a/arch/powerpc/include/asm/lv1call.h b/arch/powerpc/include/asm/lv1call.h new file mode 100644 index 000000000..b11501b30 --- /dev/null +++ b/arch/powerpc/include/asm/lv1call.h @@ -0,0 +1,337 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * PS3 hvcall interface. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + * Copyright 2003, 2004 (c) MontaVista Software, Inc. + */ + +#if !defined(_ASM_POWERPC_LV1CALL_H) +#define _ASM_POWERPC_LV1CALL_H + +#if !defined(__ASSEMBLY__) + +#include <linux/types.h> +#include <linux/export.h> + +/* lv1 call declaration macros */ + +#define LV1_1_IN_ARG_DECL u64 in_1 +#define LV1_2_IN_ARG_DECL LV1_1_IN_ARG_DECL, u64 in_2 +#define LV1_3_IN_ARG_DECL LV1_2_IN_ARG_DECL, u64 in_3 +#define LV1_4_IN_ARG_DECL LV1_3_IN_ARG_DECL, u64 in_4 +#define LV1_5_IN_ARG_DECL LV1_4_IN_ARG_DECL, u64 in_5 +#define LV1_6_IN_ARG_DECL LV1_5_IN_ARG_DECL, u64 in_6 +#define LV1_7_IN_ARG_DECL LV1_6_IN_ARG_DECL, u64 in_7 +#define LV1_8_IN_ARG_DECL LV1_7_IN_ARG_DECL, u64 in_8 +#define LV1_1_OUT_ARG_DECL u64 *out_1 +#define LV1_2_OUT_ARG_DECL LV1_1_OUT_ARG_DECL, u64 *out_2 +#define LV1_3_OUT_ARG_DECL LV1_2_OUT_ARG_DECL, u64 *out_3 +#define LV1_4_OUT_ARG_DECL LV1_3_OUT_ARG_DECL, u64 *out_4 +#define LV1_5_OUT_ARG_DECL LV1_4_OUT_ARG_DECL, u64 *out_5 +#define LV1_6_OUT_ARG_DECL LV1_5_OUT_ARG_DECL, u64 *out_6 +#define LV1_7_OUT_ARG_DECL LV1_6_OUT_ARG_DECL, u64 *out_7 + +#define LV1_0_IN_0_OUT_ARG_DECL void +#define LV1_1_IN_0_OUT_ARG_DECL LV1_1_IN_ARG_DECL +#define LV1_2_IN_0_OUT_ARG_DECL LV1_2_IN_ARG_DECL +#define LV1_3_IN_0_OUT_ARG_DECL LV1_3_IN_ARG_DECL +#define LV1_4_IN_0_OUT_ARG_DECL LV1_4_IN_ARG_DECL +#define LV1_5_IN_0_OUT_ARG_DECL LV1_5_IN_ARG_DECL +#define LV1_6_IN_0_OUT_ARG_DECL LV1_6_IN_ARG_DECL +#define LV1_7_IN_0_OUT_ARG_DECL LV1_7_IN_ARG_DECL + +#define LV1_0_IN_1_OUT_ARG_DECL LV1_1_OUT_ARG_DECL +#define LV1_1_IN_1_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_2_IN_1_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_3_IN_1_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_4_IN_1_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_5_IN_1_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_6_IN_1_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_7_IN_1_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_1_OUT_ARG_DECL +#define LV1_8_IN_1_OUT_ARG_DECL LV1_8_IN_ARG_DECL, LV1_1_OUT_ARG_DECL + +#define LV1_0_IN_2_OUT_ARG_DECL LV1_2_OUT_ARG_DECL +#define LV1_1_IN_2_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_2_IN_2_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_3_IN_2_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_4_IN_2_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_5_IN_2_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_6_IN_2_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_2_OUT_ARG_DECL +#define LV1_7_IN_2_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_2_OUT_ARG_DECL + +#define LV1_0_IN_3_OUT_ARG_DECL LV1_3_OUT_ARG_DECL +#define LV1_1_IN_3_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_2_IN_3_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_3_IN_3_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_4_IN_3_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_5_IN_3_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_6_IN_3_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_3_OUT_ARG_DECL +#define LV1_7_IN_3_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_3_OUT_ARG_DECL + +#define LV1_0_IN_4_OUT_ARG_DECL LV1_4_OUT_ARG_DECL +#define LV1_1_IN_4_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_2_IN_4_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_3_IN_4_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_4_IN_4_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_5_IN_4_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_6_IN_4_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_4_OUT_ARG_DECL +#define LV1_7_IN_4_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_4_OUT_ARG_DECL + +#define LV1_0_IN_5_OUT_ARG_DECL LV1_5_OUT_ARG_DECL +#define LV1_1_IN_5_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_2_IN_5_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_3_IN_5_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_4_IN_5_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_5_IN_5_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_6_IN_5_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_5_OUT_ARG_DECL +#define LV1_7_IN_5_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_5_OUT_ARG_DECL + +#define LV1_0_IN_6_OUT_ARG_DECL LV1_6_OUT_ARG_DECL +#define LV1_1_IN_6_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_2_IN_6_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_3_IN_6_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_4_IN_6_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_5_IN_6_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_6_IN_6_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_6_OUT_ARG_DECL +#define LV1_7_IN_6_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_6_OUT_ARG_DECL + +#define LV1_0_IN_7_OUT_ARG_DECL LV1_7_OUT_ARG_DECL +#define LV1_1_IN_7_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_2_IN_7_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_3_IN_7_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_4_IN_7_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_5_IN_7_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_6_IN_7_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_7_OUT_ARG_DECL +#define LV1_7_IN_7_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_7_OUT_ARG_DECL + +#define LV1_1_IN_ARGS in_1 +#define LV1_2_IN_ARGS LV1_1_IN_ARGS, in_2 +#define LV1_3_IN_ARGS LV1_2_IN_ARGS, in_3 +#define LV1_4_IN_ARGS LV1_3_IN_ARGS, in_4 +#define LV1_5_IN_ARGS LV1_4_IN_ARGS, in_5 +#define LV1_6_IN_ARGS LV1_5_IN_ARGS, in_6 +#define LV1_7_IN_ARGS LV1_6_IN_ARGS, in_7 +#define LV1_8_IN_ARGS LV1_7_IN_ARGS, in_8 + +#define LV1_1_OUT_ARGS out_1 +#define LV1_2_OUT_ARGS LV1_1_OUT_ARGS, out_2 +#define LV1_3_OUT_ARGS LV1_2_OUT_ARGS, out_3 +#define LV1_4_OUT_ARGS LV1_3_OUT_ARGS, out_4 +#define LV1_5_OUT_ARGS LV1_4_OUT_ARGS, out_5 +#define LV1_6_OUT_ARGS LV1_5_OUT_ARGS, out_6 +#define LV1_7_OUT_ARGS LV1_6_OUT_ARGS, out_7 + +#define LV1_0_IN_0_OUT_ARGS +#define LV1_1_IN_0_OUT_ARGS LV1_1_IN_ARGS +#define LV1_2_IN_0_OUT_ARGS LV1_2_IN_ARGS +#define LV1_3_IN_0_OUT_ARGS LV1_3_IN_ARGS +#define LV1_4_IN_0_OUT_ARGS LV1_4_IN_ARGS +#define LV1_5_IN_0_OUT_ARGS LV1_5_IN_ARGS +#define LV1_6_IN_0_OUT_ARGS LV1_6_IN_ARGS +#define LV1_7_IN_0_OUT_ARGS LV1_7_IN_ARGS + +#define LV1_0_IN_1_OUT_ARGS LV1_1_OUT_ARGS +#define LV1_1_IN_1_OUT_ARGS LV1_1_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_2_IN_1_OUT_ARGS LV1_2_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_3_IN_1_OUT_ARGS LV1_3_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_4_IN_1_OUT_ARGS LV1_4_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_5_IN_1_OUT_ARGS LV1_5_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_6_IN_1_OUT_ARGS LV1_6_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_7_IN_1_OUT_ARGS LV1_7_IN_ARGS, LV1_1_OUT_ARGS +#define LV1_8_IN_1_OUT_ARGS LV1_8_IN_ARGS, LV1_1_OUT_ARGS + +#define LV1_0_IN_2_OUT_ARGS LV1_2_OUT_ARGS +#define LV1_1_IN_2_OUT_ARGS LV1_1_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_2_IN_2_OUT_ARGS LV1_2_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_3_IN_2_OUT_ARGS LV1_3_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_4_IN_2_OUT_ARGS LV1_4_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_5_IN_2_OUT_ARGS LV1_5_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_6_IN_2_OUT_ARGS LV1_6_IN_ARGS, LV1_2_OUT_ARGS +#define LV1_7_IN_2_OUT_ARGS LV1_7_IN_ARGS, LV1_2_OUT_ARGS + +#define LV1_0_IN_3_OUT_ARGS LV1_3_OUT_ARGS +#define LV1_1_IN_3_OUT_ARGS LV1_1_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_2_IN_3_OUT_ARGS LV1_2_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_3_IN_3_OUT_ARGS LV1_3_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_4_IN_3_OUT_ARGS LV1_4_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_5_IN_3_OUT_ARGS LV1_5_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_6_IN_3_OUT_ARGS LV1_6_IN_ARGS, LV1_3_OUT_ARGS +#define LV1_7_IN_3_OUT_ARGS LV1_7_IN_ARGS, LV1_3_OUT_ARGS + +#define LV1_0_IN_4_OUT_ARGS LV1_4_OUT_ARGS +#define LV1_1_IN_4_OUT_ARGS LV1_1_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_2_IN_4_OUT_ARGS LV1_2_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_3_IN_4_OUT_ARGS LV1_3_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_4_IN_4_OUT_ARGS LV1_4_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_5_IN_4_OUT_ARGS LV1_5_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_6_IN_4_OUT_ARGS LV1_6_IN_ARGS, LV1_4_OUT_ARGS +#define LV1_7_IN_4_OUT_ARGS LV1_7_IN_ARGS, LV1_4_OUT_ARGS + +#define LV1_0_IN_5_OUT_ARGS LV1_5_OUT_ARGS +#define LV1_1_IN_5_OUT_ARGS LV1_1_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_2_IN_5_OUT_ARGS LV1_2_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_3_IN_5_OUT_ARGS LV1_3_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_4_IN_5_OUT_ARGS LV1_4_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_5_IN_5_OUT_ARGS LV1_5_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_6_IN_5_OUT_ARGS LV1_6_IN_ARGS, LV1_5_OUT_ARGS +#define LV1_7_IN_5_OUT_ARGS LV1_7_IN_ARGS, LV1_5_OUT_ARGS + +#define LV1_0_IN_6_OUT_ARGS LV1_6_OUT_ARGS +#define LV1_1_IN_6_OUT_ARGS LV1_1_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_2_IN_6_OUT_ARGS LV1_2_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_3_IN_6_OUT_ARGS LV1_3_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_4_IN_6_OUT_ARGS LV1_4_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_5_IN_6_OUT_ARGS LV1_5_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_6_IN_6_OUT_ARGS LV1_6_IN_ARGS, LV1_6_OUT_ARGS +#define LV1_7_IN_6_OUT_ARGS LV1_7_IN_ARGS, LV1_6_OUT_ARGS + +#define LV1_0_IN_7_OUT_ARGS LV1_7_OUT_ARGS +#define LV1_1_IN_7_OUT_ARGS LV1_1_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_2_IN_7_OUT_ARGS LV1_2_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_3_IN_7_OUT_ARGS LV1_3_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_4_IN_7_OUT_ARGS LV1_4_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_5_IN_7_OUT_ARGS LV1_5_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_6_IN_7_OUT_ARGS LV1_6_IN_ARGS, LV1_7_OUT_ARGS +#define LV1_7_IN_7_OUT_ARGS LV1_7_IN_ARGS, LV1_7_OUT_ARGS + +/* + * This LV1_CALL() macro is for use by callers. It expands into an + * inline call wrapper and an underscored HV call declaration. The + * wrapper can be used to instrument the lv1 call interface. The + * file lv1call.S defines its own LV1_CALL() macro to expand into + * the actual underscored call definition. + */ + +#if !defined(LV1_CALL) +#define LV1_CALL(name, in, out, num) \ + extern s64 _lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL); \ + static inline int lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL) \ + {return _lv1_##name(LV1_##in##_IN_##out##_OUT_ARGS);} +#endif + +#endif /* !defined(__ASSEMBLY__) */ + +/* lv1 call table */ + +LV1_CALL(allocate_memory, 4, 2, 0 ) +LV1_CALL(write_htab_entry, 4, 0, 1 ) +LV1_CALL(construct_virtual_address_space, 3, 2, 2 ) +LV1_CALL(invalidate_htab_entries, 5, 0, 3 ) +LV1_CALL(get_virtual_address_space_id_of_ppe, 0, 1, 4 ) +LV1_CALL(query_logical_partition_address_region_info, 1, 5, 6 ) +LV1_CALL(select_virtual_address_space, 1, 0, 7 ) +LV1_CALL(pause, 1, 0, 9 ) +LV1_CALL(destruct_virtual_address_space, 1, 0, 10 ) +LV1_CALL(configure_irq_state_bitmap, 3, 0, 11 ) +LV1_CALL(connect_irq_plug_ext, 5, 0, 12 ) +LV1_CALL(release_memory, 1, 0, 13 ) +LV1_CALL(put_iopte, 5, 0, 15 ) +LV1_CALL(disconnect_irq_plug_ext, 3, 0, 17 ) +LV1_CALL(construct_event_receive_port, 0, 1, 18 ) +LV1_CALL(destruct_event_receive_port, 1, 0, 19 ) +LV1_CALL(send_event_locally, 1, 0, 24 ) +LV1_CALL(end_of_interrupt, 1, 0, 27 ) +LV1_CALL(connect_irq_plug, 2, 0, 28 ) +LV1_CALL(disconnect_irq_plug, 1, 0, 29 ) +LV1_CALL(end_of_interrupt_ext, 3, 0, 30 ) +LV1_CALL(did_update_interrupt_mask, 2, 0, 31 ) +LV1_CALL(shutdown_logical_partition, 1, 0, 44 ) +LV1_CALL(destruct_logical_spe, 1, 0, 54 ) +LV1_CALL(construct_logical_spe, 7, 6, 57 ) +LV1_CALL(set_spe_interrupt_mask, 3, 0, 61 ) +LV1_CALL(set_spe_transition_notifier, 3, 0, 64 ) +LV1_CALL(disable_logical_spe, 2, 0, 65 ) +LV1_CALL(clear_spe_interrupt_status, 4, 0, 66 ) +LV1_CALL(get_spe_interrupt_status, 2, 1, 67 ) +LV1_CALL(get_logical_ppe_id, 0, 1, 69 ) +LV1_CALL(set_interrupt_mask, 5, 0, 73 ) +LV1_CALL(get_logical_partition_id, 0, 1, 74 ) +LV1_CALL(configure_execution_time_variable, 1, 0, 77 ) +LV1_CALL(get_spe_irq_outlet, 2, 1, 78 ) +LV1_CALL(set_spe_privilege_state_area_1_register, 3, 0, 79 ) +LV1_CALL(create_repository_node, 6, 0, 90 ) +LV1_CALL(read_repository_node, 5, 2, 91 ) +LV1_CALL(write_repository_node, 6, 0, 92 ) +LV1_CALL(delete_repository_node, 4, 0, 93 ) +LV1_CALL(read_htab_entries, 2, 5, 95 ) +LV1_CALL(set_dabr, 2, 0, 96 ) +LV1_CALL(get_total_execution_time, 2, 1, 103 ) +LV1_CALL(allocate_io_segment, 3, 1, 116 ) +LV1_CALL(release_io_segment, 2, 0, 117 ) +LV1_CALL(construct_io_irq_outlet, 1, 1, 120 ) +LV1_CALL(destruct_io_irq_outlet, 1, 0, 121 ) +LV1_CALL(map_htab, 1, 1, 122 ) +LV1_CALL(unmap_htab, 1, 0, 123 ) +LV1_CALL(get_version_info, 0, 2, 127 ) +LV1_CALL(insert_htab_entry, 6, 3, 158 ) +LV1_CALL(read_virtual_uart, 3, 1, 162 ) +LV1_CALL(write_virtual_uart, 3, 1, 163 ) +LV1_CALL(set_virtual_uart_param, 3, 0, 164 ) +LV1_CALL(get_virtual_uart_param, 2, 1, 165 ) +LV1_CALL(configure_virtual_uart_irq, 1, 1, 166 ) +LV1_CALL(open_device, 3, 0, 170 ) +LV1_CALL(close_device, 2, 0, 171 ) +LV1_CALL(map_device_mmio_region, 5, 1, 172 ) +LV1_CALL(unmap_device_mmio_region, 3, 0, 173 ) +LV1_CALL(allocate_device_dma_region, 5, 1, 174 ) +LV1_CALL(free_device_dma_region, 3, 0, 175 ) +LV1_CALL(map_device_dma_region, 6, 0, 176 ) +LV1_CALL(unmap_device_dma_region, 4, 0, 177 ) +LV1_CALL(net_add_multicast_address, 4, 0, 185 ) +LV1_CALL(net_remove_multicast_address, 4, 0, 186 ) +LV1_CALL(net_start_tx_dma, 4, 0, 187 ) +LV1_CALL(net_stop_tx_dma, 2, 0, 188 ) +LV1_CALL(net_start_rx_dma, 4, 0, 189 ) +LV1_CALL(net_stop_rx_dma, 2, 0, 190 ) +LV1_CALL(net_set_interrupt_status_indicator, 4, 0, 191 ) +LV1_CALL(net_set_interrupt_mask, 4, 0, 193 ) +LV1_CALL(net_control, 6, 2, 194 ) +LV1_CALL(connect_interrupt_event_receive_port, 4, 0, 197 ) +LV1_CALL(disconnect_interrupt_event_receive_port, 4, 0, 198 ) +LV1_CALL(get_spe_all_interrupt_statuses, 1, 1, 199 ) +LV1_CALL(deconfigure_virtual_uart_irq, 0, 0, 202 ) +LV1_CALL(enable_logical_spe, 2, 0, 207 ) +LV1_CALL(gpu_open, 1, 0, 210 ) +LV1_CALL(gpu_close, 0, 0, 211 ) +LV1_CALL(gpu_device_map, 1, 2, 212 ) +LV1_CALL(gpu_device_unmap, 1, 0, 213 ) +LV1_CALL(gpu_memory_allocate, 5, 2, 214 ) +LV1_CALL(gpu_memory_free, 1, 0, 216 ) +LV1_CALL(gpu_context_allocate, 2, 5, 217 ) +LV1_CALL(gpu_context_free, 1, 0, 218 ) +LV1_CALL(gpu_context_iomap, 5, 0, 221 ) +LV1_CALL(gpu_context_attribute, 6, 0, 225 ) +LV1_CALL(gpu_context_intr, 1, 1, 227 ) +LV1_CALL(gpu_attribute, 3, 0, 228 ) +LV1_CALL(get_rtc, 0, 2, 232 ) +LV1_CALL(set_ppe_periodic_tracer_frequency, 1, 0, 240 ) +LV1_CALL(start_ppe_periodic_tracer, 5, 0, 241 ) +LV1_CALL(stop_ppe_periodic_tracer, 1, 1, 242 ) +LV1_CALL(storage_read, 6, 1, 245 ) +LV1_CALL(storage_write, 6, 1, 246 ) +LV1_CALL(storage_send_device_command, 6, 1, 248 ) +LV1_CALL(storage_get_async_status, 1, 2, 249 ) +LV1_CALL(storage_check_async_status, 2, 1, 254 ) +LV1_CALL(panic, 1, 0, 255 ) +LV1_CALL(construct_lpm, 6, 3, 140 ) +LV1_CALL(destruct_lpm, 1, 0, 141 ) +LV1_CALL(start_lpm, 1, 0, 142 ) +LV1_CALL(stop_lpm, 1, 1, 143 ) +LV1_CALL(copy_lpm_trace_buffer, 3, 1, 144 ) +LV1_CALL(add_lpm_event_bookmark, 5, 0, 145 ) +LV1_CALL(delete_lpm_event_bookmark, 3, 0, 146 ) +LV1_CALL(set_lpm_interrupt_mask, 3, 1, 147 ) +LV1_CALL(get_lpm_interrupt_status, 1, 1, 148 ) +LV1_CALL(set_lpm_general_control, 5, 2, 149 ) +LV1_CALL(set_lpm_interval, 3, 1, 150 ) +LV1_CALL(set_lpm_trigger_control, 3, 1, 151 ) +LV1_CALL(set_lpm_counter_control, 4, 1, 152 ) +LV1_CALL(set_lpm_group_control, 3, 1, 153 ) +LV1_CALL(set_lpm_debug_bus_control, 3, 1, 154 ) +LV1_CALL(set_lpm_counter, 5, 2, 155 ) +LV1_CALL(set_lpm_signal, 7, 0, 156 ) +LV1_CALL(set_lpm_spr_trigger, 2, 0, 157 ) + +#endif diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h new file mode 100644 index 000000000..d319160d7 --- /dev/null +++ b/arch/powerpc/include/asm/machdep.h @@ -0,0 +1,300 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_MACHDEP_H +#define _ASM_POWERPC_MACHDEP_H +#ifdef __KERNEL__ + +#include <linux/seq_file.h> +#include <linux/init.h> +#include <linux/dma-mapping.h> +#include <linux/export.h> + +#include <asm/setup.h> + +/* We export this macro for external modules like Alsa to know if + * ppc_md.feature_call is implemented or not + */ +#define CONFIG_PPC_HAS_FEATURE_CALLS + +struct pt_regs; +struct pci_bus; +struct device_node; +struct iommu_table; +struct rtc_time; +struct file; +struct pci_controller; +struct kimage; +struct pci_host_bridge; + +struct machdep_calls { + char *name; +#ifdef CONFIG_PPC64 +#ifdef CONFIG_PM + void (*iommu_save)(void); + void (*iommu_restore)(void); +#endif +#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE + unsigned long (*memory_block_size)(void); +#endif +#endif /* CONFIG_PPC64 */ + + void (*dma_set_mask)(struct device *dev, u64 dma_mask); + + int (*probe)(void); + void (*setup_arch)(void); /* Optional, may be NULL */ + /* Optional, may be NULL. */ + void (*show_cpuinfo)(struct seq_file *m); + void (*show_percpuinfo)(struct seq_file *m, int i); + /* Returns the current operating frequency of "cpu" in Hz */ + unsigned long (*get_proc_freq)(unsigned int cpu); + + void (*init_IRQ)(void); + + /* Return an irq, or 0 to indicate there are none pending. */ + unsigned int (*get_irq)(void); + + /* PCI stuff */ + /* Called after allocating resources */ + void (*pcibios_fixup)(void); + void (*pci_irq_fixup)(struct pci_dev *dev); + int (*pcibios_root_bridge_prepare)(struct pci_host_bridge + *bridge); + + /* finds all the pci_controllers present at boot */ + void (*discover_phbs)(void); + + /* To setup PHBs when using automatic OF platform driver for PCI */ + int (*pci_setup_phb)(struct pci_controller *host); + + void __noreturn (*restart)(char *cmd); + void __noreturn (*halt)(void); + void (*panic)(char *str); + + long (*time_init)(void); /* Optional, may be NULL */ + + int (*set_rtc_time)(struct rtc_time *); + void (*get_rtc_time)(struct rtc_time *); + time64_t (*get_boot_time)(void); + unsigned char (*rtc_read_val)(int addr); + void (*rtc_write_val)(int addr, unsigned char val); + + void (*calibrate_decr)(void); + + void (*progress)(char *, unsigned short); + + /* Interface for platform error logging */ + void (*log_error)(char *buf, unsigned int err_type, int fatal); + + unsigned char (*nvram_read_val)(int addr); + void (*nvram_write_val)(int addr, unsigned char val); + ssize_t (*nvram_write)(char *buf, size_t count, loff_t *index); + ssize_t (*nvram_read)(char *buf, size_t count, loff_t *index); + ssize_t (*nvram_size)(void); + void (*nvram_sync)(void); + + /* Exception handlers */ + int (*system_reset_exception)(struct pt_regs *regs); + int (*machine_check_exception)(struct pt_regs *regs); + int (*handle_hmi_exception)(struct pt_regs *regs); + + /* Early exception handlers called in realmode */ + int (*hmi_exception_early)(struct pt_regs *regs); + long (*machine_check_early)(struct pt_regs *regs); + + /* Called during machine check exception to retrive fixup address. */ + bool (*mce_check_early_recovery)(struct pt_regs *regs); + + /* Motherboard/chipset features. This is a kind of general purpose + * hook used to control some machine specific features (like reset + * lines, chip power control, etc...). + */ + long (*feature_call)(unsigned int feature, ...); + + /* Get legacy PCI/IDE interrupt mapping */ + int (*pci_get_legacy_ide_irq)(struct pci_dev *dev, int channel); + + /* Get access protection for /dev/mem */ + pgprot_t (*phys_mem_access_prot)(struct file *file, + unsigned long pfn, + unsigned long size, + pgprot_t vma_prot); + + /* + * Function for waiting for work with reduced power in idle loop; + * called with interrupts disabled. + */ + void (*power_save)(void); + + /* Function to enable performance monitor counters for this + platform, called once per cpu. */ + void (*enable_pmcs)(void); + + /* Set DABR for this platform, leave empty for default implementation */ + int (*set_dabr)(unsigned long dabr, + unsigned long dabrx); + + /* Set DAWR for this platform, leave empty for default implementation */ + int (*set_dawr)(int nr, unsigned long dawr, + unsigned long dawrx); + +#ifdef CONFIG_PPC32 /* XXX for now */ + /* A general init function, called by ppc_init in init/main.c. + May be NULL. */ + void (*init)(void); + + void (*kgdb_map_scc)(void); + + /* + * optional PCI "hooks" + */ + /* Called at then very end of pcibios_init() */ + void (*pcibios_after_init)(void); + +#endif /* CONFIG_PPC32 */ + + /* Called in indirect_* to avoid touching devices */ + int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char); + + /* Called after PPC generic resource fixup to perform + machine specific fixups */ + void (*pcibios_fixup_resources)(struct pci_dev *); + + /* Called for each PCI bus in the system when it's probed */ + void (*pcibios_fixup_bus)(struct pci_bus *); + + /* Called after scan and before resource survey */ + void (*pcibios_fixup_phb)(struct pci_controller *hose); + + /* + * Called after device has been added to bus and + * before sysfs has been created. + */ + void (*pcibios_bus_add_device)(struct pci_dev *pdev); + + resource_size_t (*pcibios_default_alignment)(void); + +#ifdef CONFIG_PCI_IOV + void (*pcibios_fixup_sriov)(struct pci_dev *pdev); + resource_size_t (*pcibios_iov_resource_alignment)(struct pci_dev *, int resno); + int (*pcibios_sriov_enable)(struct pci_dev *pdev, u16 num_vfs); + int (*pcibios_sriov_disable)(struct pci_dev *pdev); +#endif /* CONFIG_PCI_IOV */ + + /* Called to shutdown machine specific hardware not already controlled + * by other drivers. + */ + void (*machine_shutdown)(void); + +#ifdef CONFIG_KEXEC_CORE + void (*kexec_cpu_down)(int crash_shutdown, int secondary); + + /* Called to do what every setup is needed on image and the + * reboot code buffer. Returns 0 on success. + * Provide your own (maybe dummy) implementation if your platform + * claims to support kexec. + */ + int (*machine_kexec_prepare)(struct kimage *image); + + /* Called to perform the _real_ kexec. + * Do NOT allocate memory or fail here. We are past the point of + * no return. + */ + void (*machine_kexec)(struct kimage *image); +#endif /* CONFIG_KEXEC_CORE */ + +#ifdef CONFIG_SUSPEND + /* These are called to disable and enable, respectively, IRQs when + * entering a suspend state. If NULL, then the generic versions + * will be called. The generic versions disable/enable the + * decrementer along with interrupts. + */ + void (*suspend_disable_irqs)(void); + void (*suspend_enable_irqs)(void); +#endif + int (*suspend_disable_cpu)(void); + +#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE + ssize_t (*cpu_probe)(const char *, size_t); + ssize_t (*cpu_release)(const char *, size_t); +#endif + +#ifdef CONFIG_ARCH_RANDOM + int (*get_random_seed)(unsigned long *v); +#endif +}; + +extern void e500_idle(void); +extern void power4_idle(void); +extern void ppc6xx_idle(void); +extern void book3e_idle(void); + +/* + * ppc_md contains a copy of the machine description structure for the + * current platform. machine_id contains the initial address where the + * description was found during boot. + */ +extern struct machdep_calls ppc_md; +extern struct machdep_calls *machine_id; + +#define __machine_desc __section(".machine.desc") + +#define define_machine(name) \ + extern struct machdep_calls mach_##name; \ + EXPORT_SYMBOL(mach_##name); \ + struct machdep_calls mach_##name __machine_desc = + +#define machine_is(name) \ + ({ \ + extern struct machdep_calls mach_##name \ + __attribute__((weak)); \ + machine_id == &mach_##name; \ + }) + +extern void probe_machine(void); + +#ifdef CONFIG_PPC_PMAC +/* + * Power macintoshes have either a CUDA, PMU or SMU controlling + * system reset, power, NVRAM, RTC. + */ +typedef enum sys_ctrler_kind { + SYS_CTRLER_UNKNOWN = 0, + SYS_CTRLER_CUDA = 1, + SYS_CTRLER_PMU = 2, + SYS_CTRLER_SMU = 3, +} sys_ctrler_t; +extern sys_ctrler_t sys_ctrler; + +#endif /* CONFIG_PPC_PMAC */ + +static inline void log_error(char *buf, unsigned int err_type, int fatal) +{ + if (ppc_md.log_error) + ppc_md.log_error(buf, err_type, fatal); +} + +#define __define_machine_initcall(mach, fn, id) \ + static int __init __machine_initcall_##mach##_##fn(void) { \ + if (machine_is(mach)) return fn(); \ + return 0; \ + } \ + __define_initcall(__machine_initcall_##mach##_##fn, id); + +#define machine_early_initcall(mach, fn) __define_machine_initcall(mach, fn, early) +#define machine_core_initcall(mach, fn) __define_machine_initcall(mach, fn, 1) +#define machine_core_initcall_sync(mach, fn) __define_machine_initcall(mach, fn, 1s) +#define machine_postcore_initcall(mach, fn) __define_machine_initcall(mach, fn, 2) +#define machine_postcore_initcall_sync(mach, fn) __define_machine_initcall(mach, fn, 2s) +#define machine_arch_initcall(mach, fn) __define_machine_initcall(mach, fn, 3) +#define machine_arch_initcall_sync(mach, fn) __define_machine_initcall(mach, fn, 3s) +#define machine_subsys_initcall(mach, fn) __define_machine_initcall(mach, fn, 4) +#define machine_subsys_initcall_sync(mach, fn) __define_machine_initcall(mach, fn, 4s) +#define machine_fs_initcall(mach, fn) __define_machine_initcall(mach, fn, 5) +#define machine_fs_initcall_sync(mach, fn) __define_machine_initcall(mach, fn, 5s) +#define machine_rootfs_initcall(mach, fn) __define_machine_initcall(mach, fn, rootfs) +#define machine_device_initcall(mach, fn) __define_machine_initcall(mach, fn, 6) +#define machine_device_initcall_sync(mach, fn) __define_machine_initcall(mach, fn, 6s) +#define machine_late_initcall(mach, fn) __define_machine_initcall(mach, fn, 7) +#define machine_late_initcall_sync(mach, fn) __define_machine_initcall(mach, fn, 7s) + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_MACHDEP_H */ diff --git a/arch/powerpc/include/asm/macio.h b/arch/powerpc/include/asm/macio.h new file mode 100644 index 000000000..ff5fd82d9 --- /dev/null +++ b/arch/powerpc/include/asm/macio.h @@ -0,0 +1,145 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __MACIO_ASIC_H__ +#define __MACIO_ASIC_H__ +#ifdef __KERNEL__ + +#include <linux/of_device.h> + +extern struct bus_type macio_bus_type; + +/* MacIO device driver is defined later */ +struct macio_driver; +struct macio_chip; + +#define MACIO_DEV_COUNT_RESOURCES 8 +#define MACIO_DEV_COUNT_IRQS 8 + +/* + * the macio_bus structure is used to describe a "virtual" bus + * within a MacIO ASIC. It's typically provided by a macio_pci_asic + * PCI device, but could be provided differently as well (nubus + * machines using a fake OF tree). + * + * The pdev field can be NULL on non-PCI machines + */ +struct macio_bus +{ + struct macio_chip *chip; /* macio_chip (private use) */ + int index; /* macio chip index in system */ +#ifdef CONFIG_PCI + struct pci_dev *pdev; /* PCI device hosting this bus */ +#endif +}; + +/* + * the macio_dev structure is used to describe a device + * within an Apple MacIO ASIC. + */ +struct macio_dev +{ + struct macio_bus *bus; /* macio bus this device is on */ + struct macio_dev *media_bay; /* Device is part of a media bay */ + struct platform_device ofdev; + struct device_dma_parameters dma_parms; /* ide needs that */ + int n_resources; + struct resource resource[MACIO_DEV_COUNT_RESOURCES]; + int n_interrupts; + struct resource interrupt[MACIO_DEV_COUNT_IRQS]; +}; +#define to_macio_device(d) container_of(d, struct macio_dev, ofdev.dev) +#define of_to_macio_device(d) container_of(d, struct macio_dev, ofdev) + +extern struct macio_dev *macio_dev_get(struct macio_dev *dev); +extern void macio_dev_put(struct macio_dev *dev); + +/* + * Accessors to resources & interrupts and other device + * fields + */ + +static inline int macio_resource_count(struct macio_dev *dev) +{ + return dev->n_resources; +} + +static inline unsigned long macio_resource_start(struct macio_dev *dev, int resource_no) +{ + return dev->resource[resource_no].start; +} + +static inline unsigned long macio_resource_end(struct macio_dev *dev, int resource_no) +{ + return dev->resource[resource_no].end; +} + +static inline unsigned long macio_resource_len(struct macio_dev *dev, int resource_no) +{ + struct resource *res = &dev->resource[resource_no]; + if (res->start == 0 || res->end == 0 || res->end < res->start) + return 0; + return resource_size(res); +} + +extern int macio_enable_devres(struct macio_dev *dev); + +extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name); +extern void macio_release_resource(struct macio_dev *dev, int resource_no); +extern int macio_request_resources(struct macio_dev *dev, const char *name); +extern void macio_release_resources(struct macio_dev *dev); + +static inline int macio_irq_count(struct macio_dev *dev) +{ + return dev->n_interrupts; +} + +static inline int macio_irq(struct macio_dev *dev, int irq_no) +{ + return dev->interrupt[irq_no].start; +} + +static inline void macio_set_drvdata(struct macio_dev *dev, void *data) +{ + dev_set_drvdata(&dev->ofdev.dev, data); +} + +static inline void* macio_get_drvdata(struct macio_dev *dev) +{ + return dev_get_drvdata(&dev->ofdev.dev); +} + +static inline struct device_node *macio_get_of_node(struct macio_dev *mdev) +{ + return mdev->ofdev.dev.of_node; +} + +#ifdef CONFIG_PCI +static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev) +{ + return mdev->bus->pdev; +} +#endif + +/* + * A driver for a mac-io chip based device + */ +struct macio_driver +{ + int (*probe)(struct macio_dev* dev, const struct of_device_id *match); + int (*remove)(struct macio_dev* dev); + + int (*suspend)(struct macio_dev* dev, pm_message_t state); + int (*resume)(struct macio_dev* dev); + int (*shutdown)(struct macio_dev* dev); + +#ifdef CONFIG_PMAC_MEDIABAY + void (*mediabay_event)(struct macio_dev* dev, int mb_state); +#endif + struct device_driver driver; +}; +#define to_macio_driver(drv) container_of(drv,struct macio_driver, driver) + +extern int macio_register_driver(struct macio_driver *); +extern void macio_unregister_driver(struct macio_driver *); + +#endif /* __KERNEL__ */ +#endif /* __MACIO_ASIC_H__ */ diff --git a/arch/powerpc/include/asm/mc146818rtc.h b/arch/powerpc/include/asm/mc146818rtc.h new file mode 100644 index 000000000..d9e4ecd41 --- /dev/null +++ b/arch/powerpc/include/asm/mc146818rtc.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_MC146818RTC_H +#define _ASM_POWERPC_MC146818RTC_H + +/* + * Machine dependent access functions for RTC registers. + */ + +#ifdef __KERNEL__ + +#include <asm/io.h> + +#ifndef RTC_PORT +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ +#endif + +/* + * The yet supported machines all access the RTC index register via + * an ISA port access but the way to access the date register differs ... + */ +#define CMOS_READ(addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +inb_p(RTC_PORT(1)); \ +}) +#define CMOS_WRITE(val, addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +outb_p((val),RTC_PORT(1)); \ +}) + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_MC146818RTC_H */ diff --git a/arch/powerpc/include/asm/mce.h b/arch/powerpc/include/asm/mce.h new file mode 100644 index 000000000..89aa8248a --- /dev/null +++ b/arch/powerpc/include/asm/mce.h @@ -0,0 +1,236 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Machine check exception header file. + * + * Copyright 2013 IBM Corporation + * Author: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> + */ + +#ifndef __ASM_PPC64_MCE_H__ +#define __ASM_PPC64_MCE_H__ + +#include <linux/bitops.h> + +enum MCE_Version { + MCE_V1 = 1, +}; + +enum MCE_Severity { + MCE_SEV_NO_ERROR = 0, + MCE_SEV_WARNING = 1, + MCE_SEV_SEVERE = 2, + MCE_SEV_FATAL = 3, +}; + +enum MCE_Disposition { + MCE_DISPOSITION_RECOVERED = 0, + MCE_DISPOSITION_NOT_RECOVERED = 1, +}; + +enum MCE_Initiator { + MCE_INITIATOR_UNKNOWN = 0, + MCE_INITIATOR_CPU = 1, + MCE_INITIATOR_PCI = 2, + MCE_INITIATOR_ISA = 3, + MCE_INITIATOR_MEMORY= 4, + MCE_INITIATOR_POWERMGM = 5, +}; + +enum MCE_ErrorType { + MCE_ERROR_TYPE_UNKNOWN = 0, + MCE_ERROR_TYPE_UE = 1, + MCE_ERROR_TYPE_SLB = 2, + MCE_ERROR_TYPE_ERAT = 3, + MCE_ERROR_TYPE_TLB = 4, + MCE_ERROR_TYPE_USER = 5, + MCE_ERROR_TYPE_RA = 6, + MCE_ERROR_TYPE_LINK = 7, + MCE_ERROR_TYPE_DCACHE = 8, + MCE_ERROR_TYPE_ICACHE = 9, +}; + +enum MCE_ErrorClass { + MCE_ECLASS_UNKNOWN = 0, + MCE_ECLASS_HARDWARE, + MCE_ECLASS_HARD_INDETERMINATE, + MCE_ECLASS_SOFTWARE, + MCE_ECLASS_SOFT_INDETERMINATE, +}; + +enum MCE_UeErrorType { + MCE_UE_ERROR_INDETERMINATE = 0, + MCE_UE_ERROR_IFETCH = 1, + MCE_UE_ERROR_PAGE_TABLE_WALK_IFETCH = 2, + MCE_UE_ERROR_LOAD_STORE = 3, + MCE_UE_ERROR_PAGE_TABLE_WALK_LOAD_STORE = 4, +}; + +enum MCE_SlbErrorType { + MCE_SLB_ERROR_INDETERMINATE = 0, + MCE_SLB_ERROR_PARITY = 1, + MCE_SLB_ERROR_MULTIHIT = 2, +}; + +enum MCE_EratErrorType { + MCE_ERAT_ERROR_INDETERMINATE = 0, + MCE_ERAT_ERROR_PARITY = 1, + MCE_ERAT_ERROR_MULTIHIT = 2, +}; + +enum MCE_TlbErrorType { + MCE_TLB_ERROR_INDETERMINATE = 0, + MCE_TLB_ERROR_PARITY = 1, + MCE_TLB_ERROR_MULTIHIT = 2, +}; + +enum MCE_UserErrorType { + MCE_USER_ERROR_INDETERMINATE = 0, + MCE_USER_ERROR_TLBIE = 1, + MCE_USER_ERROR_SCV = 2, +}; + +enum MCE_RaErrorType { + MCE_RA_ERROR_INDETERMINATE = 0, + MCE_RA_ERROR_IFETCH = 1, + MCE_RA_ERROR_IFETCH_FOREIGN = 2, + MCE_RA_ERROR_PAGE_TABLE_WALK_IFETCH = 3, + MCE_RA_ERROR_PAGE_TABLE_WALK_IFETCH_FOREIGN = 4, + MCE_RA_ERROR_LOAD = 5, + MCE_RA_ERROR_STORE = 6, + MCE_RA_ERROR_PAGE_TABLE_WALK_LOAD_STORE = 7, + MCE_RA_ERROR_PAGE_TABLE_WALK_LOAD_STORE_FOREIGN = 8, + MCE_RA_ERROR_LOAD_STORE_FOREIGN = 9, +}; + +enum MCE_LinkErrorType { + MCE_LINK_ERROR_INDETERMINATE = 0, + MCE_LINK_ERROR_IFETCH_TIMEOUT = 1, + MCE_LINK_ERROR_PAGE_TABLE_WALK_IFETCH_TIMEOUT = 2, + MCE_LINK_ERROR_LOAD_TIMEOUT = 3, + MCE_LINK_ERROR_STORE_TIMEOUT = 4, + MCE_LINK_ERROR_PAGE_TABLE_WALK_LOAD_STORE_TIMEOUT = 5, +}; + +struct machine_check_event { + enum MCE_Version version:8; + u8 in_use; + enum MCE_Severity severity:8; + enum MCE_Initiator initiator:8; + enum MCE_ErrorType error_type:8; + enum MCE_ErrorClass error_class:8; + enum MCE_Disposition disposition:8; + bool sync_error; + u16 cpu; + u64 gpr3; + u64 srr0; + u64 srr1; + union { + struct { + enum MCE_UeErrorType ue_error_type:8; + u8 effective_address_provided; + u8 physical_address_provided; + u8 ignore_event; + u8 reserved_1[4]; + u64 effective_address; + u64 physical_address; + u8 reserved_2[8]; + } ue_error; + + struct { + enum MCE_SlbErrorType slb_error_type:8; + u8 effective_address_provided; + u8 reserved_1[6]; + u64 effective_address; + u8 reserved_2[16]; + } slb_error; + + struct { + enum MCE_EratErrorType erat_error_type:8; + u8 effective_address_provided; + u8 reserved_1[6]; + u64 effective_address; + u8 reserved_2[16]; + } erat_error; + + struct { + enum MCE_TlbErrorType tlb_error_type:8; + u8 effective_address_provided; + u8 reserved_1[6]; + u64 effective_address; + u8 reserved_2[16]; + } tlb_error; + + struct { + enum MCE_UserErrorType user_error_type:8; + u8 effective_address_provided; + u8 reserved_1[6]; + u64 effective_address; + u8 reserved_2[16]; + } user_error; + + struct { + enum MCE_RaErrorType ra_error_type:8; + u8 effective_address_provided; + u8 reserved_1[6]; + u64 effective_address; + u8 reserved_2[16]; + } ra_error; + + struct { + enum MCE_LinkErrorType link_error_type:8; + u8 effective_address_provided; + u8 reserved_1[6]; + u64 effective_address; + u8 reserved_2[16]; + } link_error; + } u; +}; + +struct mce_error_info { + enum MCE_ErrorType error_type:8; + union { + enum MCE_UeErrorType ue_error_type:8; + enum MCE_SlbErrorType slb_error_type:8; + enum MCE_EratErrorType erat_error_type:8; + enum MCE_TlbErrorType tlb_error_type:8; + enum MCE_UserErrorType user_error_type:8; + enum MCE_RaErrorType ra_error_type:8; + enum MCE_LinkErrorType link_error_type:8; + } u; + enum MCE_Severity severity:8; + enum MCE_Initiator initiator:8; + enum MCE_ErrorClass error_class:8; + bool sync_error; + bool ignore_event; +}; + +#define MAX_MC_EVT 100 + +/* Release flags for get_mce_event() */ +#define MCE_EVENT_RELEASE true +#define MCE_EVENT_DONTRELEASE false + +struct pt_regs; +struct notifier_block; + +extern void save_mce_event(struct pt_regs *regs, long handled, + struct mce_error_info *mce_err, uint64_t nip, + uint64_t addr, uint64_t phys_addr); +extern int get_mce_event(struct machine_check_event *mce, bool release); +extern void release_mce_event(void); +extern void machine_check_queue_event(void); +extern void machine_check_print_event_info(struct machine_check_event *evt, + bool user_mode, bool in_guest); +unsigned long addr_to_pfn(struct pt_regs *regs, unsigned long addr); +extern void mce_common_process_ue(struct pt_regs *regs, + struct mce_error_info *mce_err); +int mce_register_notifier(struct notifier_block *nb); +int mce_unregister_notifier(struct notifier_block *nb); +#ifdef CONFIG_PPC_BOOK3S_64 +void flush_and_reload_slb(void); +long __machine_check_early_realmode_p7(struct pt_regs *regs); +long __machine_check_early_realmode_p8(struct pt_regs *regs); +long __machine_check_early_realmode_p9(struct pt_regs *regs); +long __machine_check_early_realmode_p10(struct pt_regs *regs); +#endif /* CONFIG_PPC_BOOK3S_64 */ +#endif /* __ASM_PPC64_MCE_H__ */ diff --git a/arch/powerpc/include/asm/mediabay.h b/arch/powerpc/include/asm/mediabay.h new file mode 100644 index 000000000..230fda470 --- /dev/null +++ b/arch/powerpc/include/asm/mediabay.h @@ -0,0 +1,49 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * mediabay.h: definitions for using the media bay + * on PowerBook 3400 and similar computers. + * + * Copyright (C) 1997 Paul Mackerras. + */ +#ifndef _PPC_MEDIABAY_H +#define _PPC_MEDIABAY_H + +#ifdef __KERNEL__ + +#define MB_FD 0 /* media bay contains floppy drive (automatic eject ?) */ +#define MB_FD1 1 /* media bay contains floppy drive (manual eject ?) */ +#define MB_SOUND 2 /* sound device ? */ +#define MB_CD 3 /* media bay contains ATA drive such as CD or ZIP */ +#define MB_PCI 5 /* media bay contains a PCI device */ +#define MB_POWER 6 /* media bay contains a Power device (???) */ +#define MB_NO 7 /* media bay contains nothing */ + +struct macio_dev; + +#ifdef CONFIG_PMAC_MEDIABAY + +/* Check the content type of the bay, returns MB_NO if the bay is still + * transitionning + */ +extern int check_media_bay(struct macio_dev *bay); + +/* The ATA driver uses the calls below to temporarily hold on the + * media bay callbacks while initializing the interface + */ +extern void lock_media_bay(struct macio_dev *bay); +extern void unlock_media_bay(struct macio_dev *bay); + +#else + +static inline int check_media_bay(struct macio_dev *bay) +{ + return MB_NO; +} + +static inline void lock_media_bay(struct macio_dev *bay) { } +static inline void unlock_media_bay(struct macio_dev *bay) { } + +#endif + +#endif /* __KERNEL__ */ +#endif /* _PPC_MEDIABAY_H */ diff --git a/arch/powerpc/include/asm/mem_encrypt.h b/arch/powerpc/include/asm/mem_encrypt.h new file mode 100644 index 000000000..ba9dab07c --- /dev/null +++ b/arch/powerpc/include/asm/mem_encrypt.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * SVM helper functions + * + * Copyright 2018 IBM Corporation + */ + +#ifndef _ASM_POWERPC_MEM_ENCRYPT_H +#define _ASM_POWERPC_MEM_ENCRYPT_H + +#include <asm/svm.h> + +static inline bool mem_encrypt_active(void) +{ + return is_secure_guest(); +} + +static inline bool force_dma_unencrypted(struct device *dev) +{ + return is_secure_guest(); +} + +int set_memory_encrypted(unsigned long addr, int numpages); +int set_memory_decrypted(unsigned long addr, int numpages); + +#endif /* _ASM_POWERPC_MEM_ENCRYPT_H */ diff --git a/arch/powerpc/include/asm/membarrier.h b/arch/powerpc/include/asm/membarrier.h new file mode 100644 index 000000000..6e20bb5c7 --- /dev/null +++ b/arch/powerpc/include/asm/membarrier.h @@ -0,0 +1,27 @@ +#ifndef _ASM_POWERPC_MEMBARRIER_H +#define _ASM_POWERPC_MEMBARRIER_H + +static inline void membarrier_arch_switch_mm(struct mm_struct *prev, + struct mm_struct *next, + struct task_struct *tsk) +{ + /* + * Only need the full barrier when switching between processes. + * Barrier when switching from kernel to userspace is not + * required here, given that it is implied by mmdrop(). Barrier + * when switching from userspace to kernel is not needed after + * store to rq->curr. + */ + if (likely(!(atomic_read(&next->membarrier_state) & + (MEMBARRIER_STATE_PRIVATE_EXPEDITED | + MEMBARRIER_STATE_GLOBAL_EXPEDITED)) || !prev)) + return; + + /* + * The membarrier system call requires a full memory barrier + * after storing to rq->curr, before going back to user-space. + */ + smp_mb(); +} + +#endif /* _ASM_POWERPC_MEMBARRIER_H */ diff --git a/arch/powerpc/include/asm/mm-arch-hooks.h b/arch/powerpc/include/asm/mm-arch-hooks.h new file mode 100644 index 000000000..dce274be8 --- /dev/null +++ b/arch/powerpc/include/asm/mm-arch-hooks.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Architecture specific mm hooks + * + * Copyright (C) 2015, IBM Corporation + * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com> + */ + +#ifndef _ASM_POWERPC_MM_ARCH_HOOKS_H +#define _ASM_POWERPC_MM_ARCH_HOOKS_H + +static inline void arch_remap(struct mm_struct *mm, + unsigned long old_start, unsigned long old_end, + unsigned long new_start, unsigned long new_end) +{ + /* + * mremap() doesn't allow moving multiple vmas so we can limit the + * check to old_start == vdso_base. + */ + if (old_start == mm->context.vdso_base) + mm->context.vdso_base = new_start; +} +#define arch_remap arch_remap + +#endif /* _ASM_POWERPC_MM_ARCH_HOOKS_H */ diff --git a/arch/powerpc/include/asm/mman.h b/arch/powerpc/include/asm/mman.h new file mode 100644 index 000000000..7cb6d18f5 --- /dev/null +++ b/arch/powerpc/include/asm/mman.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + */ +#ifndef _ASM_POWERPC_MMAN_H +#define _ASM_POWERPC_MMAN_H + +#include <uapi/asm/mman.h> + +#ifdef CONFIG_PPC64 + +#include <asm/cputable.h> +#include <linux/mm.h> +#include <linux/pkeys.h> +#include <asm/cpu_has_feature.h> + +static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot, + unsigned long pkey) +{ +#ifdef CONFIG_PPC_MEM_KEYS + return (((prot & PROT_SAO) ? VM_SAO : 0) | pkey_to_vmflag_bits(pkey)); +#else + return ((prot & PROT_SAO) ? VM_SAO : 0); +#endif +} +#define arch_calc_vm_prot_bits(prot, pkey) arch_calc_vm_prot_bits(prot, pkey) + +static inline pgprot_t arch_vm_get_page_prot(unsigned long vm_flags) +{ +#ifdef CONFIG_PPC_MEM_KEYS + return (vm_flags & VM_SAO) ? + __pgprot(_PAGE_SAO | vmflag_to_pte_pkey_bits(vm_flags)) : + __pgprot(0 | vmflag_to_pte_pkey_bits(vm_flags)); +#else + return (vm_flags & VM_SAO) ? __pgprot(_PAGE_SAO) : __pgprot(0); +#endif +} +#define arch_vm_get_page_prot(vm_flags) arch_vm_get_page_prot(vm_flags) + +static inline bool arch_validate_prot(unsigned long prot, unsigned long addr) +{ + if (prot & ~(PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM | PROT_SAO)) + return false; + if (prot & PROT_SAO) { + if (!cpu_has_feature(CPU_FTR_SAO)) + return false; + if (firmware_has_feature(FW_FEATURE_LPAR) && + !IS_ENABLED(CONFIG_PPC_PROT_SAO_LPAR)) + return false; + } + return true; +} +#define arch_validate_prot arch_validate_prot + +#endif /* CONFIG_PPC64 */ +#endif /* _ASM_POWERPC_MMAN_H */ diff --git a/arch/powerpc/include/asm/mmiowb.h b/arch/powerpc/include/asm/mmiowb.h new file mode 100644 index 000000000..74a00127e --- /dev/null +++ b/arch/powerpc/include/asm/mmiowb.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_MMIOWB_H +#define _ASM_POWERPC_MMIOWB_H + +#ifdef CONFIG_MMIOWB + +#include <linux/compiler.h> +#include <asm/barrier.h> +#include <asm/paca.h> + +#define arch_mmiowb_state() (&local_paca->mmiowb_state) +#define mmiowb() mb() + +#endif /* CONFIG_MMIOWB */ + +#include <asm-generic/mmiowb.h> + +#endif /* _ASM_POWERPC_MMIOWB_H */ diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h new file mode 100644 index 000000000..255a1837e --- /dev/null +++ b/arch/powerpc/include/asm/mmu.h @@ -0,0 +1,394 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_MMU_H_ +#define _ASM_POWERPC_MMU_H_ +#ifdef __KERNEL__ + +#include <linux/types.h> + +#include <asm/asm-const.h> + +/* + * MMU features bit definitions + */ + +/* + * MMU families + */ +#define MMU_FTR_HPTE_TABLE ASM_CONST(0x00000001) +#define MMU_FTR_TYPE_8xx ASM_CONST(0x00000002) +#define MMU_FTR_TYPE_40x ASM_CONST(0x00000004) +#define MMU_FTR_TYPE_44x ASM_CONST(0x00000008) +#define MMU_FTR_TYPE_FSL_E ASM_CONST(0x00000010) +#define MMU_FTR_TYPE_47x ASM_CONST(0x00000020) + +/* Radix page table supported and enabled */ +#define MMU_FTR_TYPE_RADIX ASM_CONST(0x00000040) + +/* + * Individual features below. + */ + +/* + * Support for KUEP feature. + */ +#define MMU_FTR_KUEP ASM_CONST(0x00000400) + +/* + * Support for memory protection keys. + */ +#define MMU_FTR_PKEY ASM_CONST(0x00000800) + +/* Guest Translation Shootdown Enable */ +#define MMU_FTR_GTSE ASM_CONST(0x00001000) + +/* + * Support for 68 bit VA space. We added that from ISA 2.05 + */ +#define MMU_FTR_68_BIT_VA ASM_CONST(0x00002000) +/* + * Kernel read only support. + * We added the ppp value 0b110 in ISA 2.04. + */ +#define MMU_FTR_KERNEL_RO ASM_CONST(0x00004000) + +/* + * We need to clear top 16bits of va (from the remaining 64 bits )in + * tlbie* instructions + */ +#define MMU_FTR_TLBIE_CROP_VA ASM_CONST(0x00008000) + +/* Enable use of high BAT registers */ +#define MMU_FTR_USE_HIGH_BATS ASM_CONST(0x00010000) + +/* Enable >32-bit physical addresses on 32-bit processor, only used + * by CONFIG_PPC_BOOK3S_32 currently as BookE supports that from day 1 + */ +#define MMU_FTR_BIG_PHYS ASM_CONST(0x00020000) + +/* Enable use of broadcast TLB invalidations. We don't always set it + * on processors that support it due to other constraints with the + * use of such invalidations + */ +#define MMU_FTR_USE_TLBIVAX_BCAST ASM_CONST(0x00040000) + +/* Enable use of tlbilx invalidate instructions. + */ +#define MMU_FTR_USE_TLBILX ASM_CONST(0x00080000) + +/* This indicates that the processor cannot handle multiple outstanding + * broadcast tlbivax or tlbsync. This makes the code use a spinlock + * around such invalidate forms. + */ +#define MMU_FTR_LOCK_BCAST_INVAL ASM_CONST(0x00100000) + +/* This indicates that the processor doesn't handle way selection + * properly and needs SW to track and update the LRU state. This + * is specific to an errata on e300c2/c3/c4 class parts + */ +#define MMU_FTR_NEED_DTLB_SW_LRU ASM_CONST(0x00200000) + +/* Enable use of TLB reservation. Processor should support tlbsrx. + * instruction and MAS0[WQ]. + */ +#define MMU_FTR_USE_TLBRSRV ASM_CONST(0x00800000) + +/* Use paired MAS registers (MAS7||MAS3, etc.) + */ +#define MMU_FTR_USE_PAIRED_MAS ASM_CONST(0x01000000) + +/* Doesn't support the B bit (1T segment) in SLBIE + */ +#define MMU_FTR_NO_SLBIE_B ASM_CONST(0x02000000) + +/* Support 16M large pages + */ +#define MMU_FTR_16M_PAGE ASM_CONST(0x04000000) + +/* Supports TLBIEL variant + */ +#define MMU_FTR_TLBIEL ASM_CONST(0x08000000) + +/* Supports tlbies w/o locking + */ +#define MMU_FTR_LOCKLESS_TLBIE ASM_CONST(0x10000000) + +/* Large pages can be marked CI + */ +#define MMU_FTR_CI_LARGE_PAGE ASM_CONST(0x20000000) + +/* 1T segments available + */ +#define MMU_FTR_1T_SEGMENT ASM_CONST(0x40000000) + +/* + * Supports KUAP (key 0 controlling userspace addresses) on radix + */ +#define MMU_FTR_RADIX_KUAP ASM_CONST(0x80000000) + +/* MMU feature bit sets for various CPUs */ +#define MMU_FTRS_DEFAULT_HPTE_ARCH_V2 \ + MMU_FTR_HPTE_TABLE | MMU_FTR_PPCAS_ARCH_V2 +#define MMU_FTRS_POWER MMU_FTRS_DEFAULT_HPTE_ARCH_V2 +#define MMU_FTRS_PPC970 MMU_FTRS_POWER | MMU_FTR_TLBIE_CROP_VA +#define MMU_FTRS_POWER5 MMU_FTRS_POWER | MMU_FTR_LOCKLESS_TLBIE +#define MMU_FTRS_POWER6 MMU_FTRS_POWER5 | MMU_FTR_KERNEL_RO | MMU_FTR_68_BIT_VA +#define MMU_FTRS_POWER7 MMU_FTRS_POWER6 +#define MMU_FTRS_POWER8 MMU_FTRS_POWER6 +#define MMU_FTRS_POWER9 MMU_FTRS_POWER6 +#define MMU_FTRS_POWER10 MMU_FTRS_POWER6 +#define MMU_FTRS_CELL MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \ + MMU_FTR_CI_LARGE_PAGE +#define MMU_FTRS_PA6T MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \ + MMU_FTR_CI_LARGE_PAGE | MMU_FTR_NO_SLBIE_B +#ifndef __ASSEMBLY__ +#include <linux/bug.h> +#include <asm/cputable.h> +#include <asm/page.h> + +typedef pte_t *pgtable_t; + +#ifdef CONFIG_PPC_FSL_BOOK3E +#include <asm/percpu.h> +DECLARE_PER_CPU(int, next_tlbcam_idx); +#endif + +enum { + MMU_FTRS_POSSIBLE = +#ifdef CONFIG_PPC_BOOK3S + MMU_FTR_HPTE_TABLE | +#endif +#ifdef CONFIG_PPC_8xx + MMU_FTR_TYPE_8xx | +#endif +#ifdef CONFIG_40x + MMU_FTR_TYPE_40x | +#endif +#ifdef CONFIG_44x + MMU_FTR_TYPE_44x | +#endif +#if defined(CONFIG_E200) || defined(CONFIG_E500) + MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS | MMU_FTR_USE_TLBILX | +#endif +#ifdef CONFIG_PPC_47x + MMU_FTR_TYPE_47x | MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL | +#endif +#ifdef CONFIG_PPC_BOOK3S_32 + MMU_FTR_USE_HIGH_BATS | MMU_FTR_NEED_DTLB_SW_LRU | +#endif +#ifdef CONFIG_PPC_BOOK3E_64 + MMU_FTR_USE_TLBRSRV | MMU_FTR_USE_PAIRED_MAS | +#endif +#ifdef CONFIG_PPC_BOOK3S_64 + MMU_FTR_NO_SLBIE_B | MMU_FTR_16M_PAGE | MMU_FTR_TLBIEL | + MMU_FTR_LOCKLESS_TLBIE | MMU_FTR_CI_LARGE_PAGE | + MMU_FTR_1T_SEGMENT | MMU_FTR_TLBIE_CROP_VA | + MMU_FTR_KERNEL_RO | MMU_FTR_68_BIT_VA | +#endif +#ifdef CONFIG_PPC_RADIX_MMU + MMU_FTR_TYPE_RADIX | + MMU_FTR_GTSE | +#ifdef CONFIG_PPC_KUAP + MMU_FTR_RADIX_KUAP | +#endif /* CONFIG_PPC_KUAP */ +#endif /* CONFIG_PPC_RADIX_MMU */ +#ifdef CONFIG_PPC_MEM_KEYS + MMU_FTR_PKEY | +#endif +#ifdef CONFIG_PPC_KUEP + MMU_FTR_KUEP | +#endif /* CONFIG_PPC_KUAP */ + + 0, +}; + +static inline bool early_mmu_has_feature(unsigned long feature) +{ + return !!(MMU_FTRS_POSSIBLE & cur_cpu_spec->mmu_features & feature); +} + +#ifdef CONFIG_JUMP_LABEL_FEATURE_CHECKS +#include <linux/jump_label.h> + +#define NUM_MMU_FTR_KEYS 32 + +extern struct static_key_true mmu_feature_keys[NUM_MMU_FTR_KEYS]; + +extern void mmu_feature_keys_init(void); + +static __always_inline bool mmu_has_feature(unsigned long feature) +{ + int i; + +#ifndef __clang__ /* clang can't cope with this */ + BUILD_BUG_ON(!__builtin_constant_p(feature)); +#endif + +#ifdef CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG + if (!static_key_initialized) { + printk("Warning! mmu_has_feature() used prior to jump label init!\n"); + dump_stack(); + return early_mmu_has_feature(feature); + } +#endif + + if (!(MMU_FTRS_POSSIBLE & feature)) + return false; + + i = __builtin_ctzl(feature); + return static_branch_likely(&mmu_feature_keys[i]); +} + +static inline void mmu_clear_feature(unsigned long feature) +{ + int i; + + i = __builtin_ctzl(feature); + cur_cpu_spec->mmu_features &= ~feature; + static_branch_disable(&mmu_feature_keys[i]); +} +#else + +static inline void mmu_feature_keys_init(void) +{ + +} + +static inline bool mmu_has_feature(unsigned long feature) +{ + return early_mmu_has_feature(feature); +} + +static inline void mmu_clear_feature(unsigned long feature) +{ + cur_cpu_spec->mmu_features &= ~feature; +} +#endif /* CONFIG_JUMP_LABEL */ + +extern unsigned int __start___mmu_ftr_fixup, __stop___mmu_ftr_fixup; + +#ifdef CONFIG_PPC64 +/* This is our real memory area size on ppc64 server, on embedded, we + * make it match the size our of bolted TLB area + */ +extern u64 ppc64_rma_size; + +/* Cleanup function used by kexec */ +extern void mmu_cleanup_all(void); +extern void radix__mmu_cleanup_all(void); + +/* Functions for creating and updating partition table on POWER9 */ +extern void mmu_partition_table_init(void); +extern void mmu_partition_table_set_entry(unsigned int lpid, unsigned long dw0, + unsigned long dw1, bool flush); +#endif /* CONFIG_PPC64 */ + +struct mm_struct; +#ifdef CONFIG_DEBUG_VM +extern void assert_pte_locked(struct mm_struct *mm, unsigned long addr); +#else /* CONFIG_DEBUG_VM */ +static inline void assert_pte_locked(struct mm_struct *mm, unsigned long addr) +{ +} +#endif /* !CONFIG_DEBUG_VM */ + +#ifdef CONFIG_PPC_RADIX_MMU +static inline bool radix_enabled(void) +{ + return mmu_has_feature(MMU_FTR_TYPE_RADIX); +} + +static inline bool early_radix_enabled(void) +{ + return early_mmu_has_feature(MMU_FTR_TYPE_RADIX); +} +#else +static inline bool radix_enabled(void) +{ + return false; +} + +static inline bool early_radix_enabled(void) +{ + return false; +} +#endif + +#ifdef CONFIG_STRICT_KERNEL_RWX +static inline bool strict_kernel_rwx_enabled(void) +{ + return rodata_enabled; +} +#else +static inline bool strict_kernel_rwx_enabled(void) +{ + return false; +} +#endif +#endif /* !__ASSEMBLY__ */ + +/* The kernel use the constants below to index in the page sizes array. + * The use of fixed constants for this purpose is better for performances + * of the low level hash refill handlers. + * + * A non supported page size has a "shift" field set to 0 + * + * Any new page size being implemented can get a new entry in here. Whether + * the kernel will use it or not is a different matter though. The actual page + * size used by hugetlbfs is not defined here and may be made variable + * + * Note: This array ended up being a false good idea as it's growing to the + * point where I wonder if we should replace it with something different, + * to think about, feedback welcome. --BenH. + */ + +/* These are #defines as they have to be used in assembly */ +#define MMU_PAGE_4K 0 +#define MMU_PAGE_16K 1 +#define MMU_PAGE_64K 2 +#define MMU_PAGE_64K_AP 3 /* "Admixed pages" (hash64 only) */ +#define MMU_PAGE_256K 4 +#define MMU_PAGE_512K 5 +#define MMU_PAGE_1M 6 +#define MMU_PAGE_2M 7 +#define MMU_PAGE_4M 8 +#define MMU_PAGE_8M 9 +#define MMU_PAGE_16M 10 +#define MMU_PAGE_64M 11 +#define MMU_PAGE_256M 12 +#define MMU_PAGE_1G 13 +#define MMU_PAGE_16G 14 +#define MMU_PAGE_64G 15 + +/* + * N.B. we need to change the type of hpte_page_sizes if this gets to be > 16 + * Also we need to change he type of mm_context.low/high_slices_psize. + */ +#define MMU_PAGE_COUNT 16 + +#ifdef CONFIG_PPC_BOOK3S_64 +#include <asm/book3s/64/mmu.h> +#else /* CONFIG_PPC_BOOK3S_64 */ + +#ifndef __ASSEMBLY__ +/* MMU initialization */ +extern void early_init_mmu(void); +extern void early_init_mmu_secondary(void); +extern void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size); +static inline void mmu_early_init_devtree(void) { } + +static inline void pkey_early_init_devtree(void) {} + +extern void *abatron_pteptrs[2]; +#endif /* __ASSEMBLY__ */ +#endif + +#if defined(CONFIG_PPC_BOOK3S_32) +/* 32-bit classic hash table MMU */ +#include <asm/book3s/32/mmu-hash.h> +#elif defined(CONFIG_PPC_MMU_NOHASH) +#include <asm/nohash/mmu.h> +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_MMU_H_ */ diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h new file mode 100644 index 000000000..e02aa7934 --- /dev/null +++ b/arch/powerpc/include/asm/mmu_context.h @@ -0,0 +1,302 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_POWERPC_MMU_CONTEXT_H +#define __ASM_POWERPC_MMU_CONTEXT_H +#ifdef __KERNEL__ + +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/spinlock.h> +#include <asm/mmu.h> +#include <asm/cputable.h> +#include <asm/cputhreads.h> + +/* + * Most if the context management is out of line + */ +extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm); +extern void destroy_context(struct mm_struct *mm); +#ifdef CONFIG_SPAPR_TCE_IOMMU +struct mm_iommu_table_group_mem_t; + +extern int isolate_lru_page(struct page *page); /* from internal.h */ +extern bool mm_iommu_preregistered(struct mm_struct *mm); +extern long mm_iommu_new(struct mm_struct *mm, + unsigned long ua, unsigned long entries, + struct mm_iommu_table_group_mem_t **pmem); +extern long mm_iommu_newdev(struct mm_struct *mm, unsigned long ua, + unsigned long entries, unsigned long dev_hpa, + struct mm_iommu_table_group_mem_t **pmem); +extern long mm_iommu_put(struct mm_struct *mm, + struct mm_iommu_table_group_mem_t *mem); +extern void mm_iommu_init(struct mm_struct *mm); +extern void mm_iommu_cleanup(struct mm_struct *mm); +extern struct mm_iommu_table_group_mem_t *mm_iommu_lookup(struct mm_struct *mm, + unsigned long ua, unsigned long size); +extern struct mm_iommu_table_group_mem_t *mm_iommu_lookup_rm( + struct mm_struct *mm, unsigned long ua, unsigned long size); +extern struct mm_iommu_table_group_mem_t *mm_iommu_get(struct mm_struct *mm, + unsigned long ua, unsigned long entries); +extern long mm_iommu_ua_to_hpa(struct mm_iommu_table_group_mem_t *mem, + unsigned long ua, unsigned int pageshift, unsigned long *hpa); +extern long mm_iommu_ua_to_hpa_rm(struct mm_iommu_table_group_mem_t *mem, + unsigned long ua, unsigned int pageshift, unsigned long *hpa); +extern void mm_iommu_ua_mark_dirty_rm(struct mm_struct *mm, unsigned long ua); +extern bool mm_iommu_is_devmem(struct mm_struct *mm, unsigned long hpa, + unsigned int pageshift, unsigned long *size); +extern long mm_iommu_mapped_inc(struct mm_iommu_table_group_mem_t *mem); +extern void mm_iommu_mapped_dec(struct mm_iommu_table_group_mem_t *mem); +#else +static inline bool mm_iommu_is_devmem(struct mm_struct *mm, unsigned long hpa, + unsigned int pageshift, unsigned long *size) +{ + return false; +} +static inline void mm_iommu_init(struct mm_struct *mm) { } +#endif +extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm); +extern void set_context(unsigned long id, pgd_t *pgd); + +#ifdef CONFIG_PPC_BOOK3S_64 +extern void radix__switch_mmu_context(struct mm_struct *prev, + struct mm_struct *next); +static inline void switch_mmu_context(struct mm_struct *prev, + struct mm_struct *next, + struct task_struct *tsk) +{ + if (radix_enabled()) + return radix__switch_mmu_context(prev, next); + return switch_slb(tsk, next); +} + +extern int hash__alloc_context_id(void); +extern void hash__reserve_context_id(int id); +extern void __destroy_context(int context_id); +static inline void mmu_context_init(void) { } + +static inline int alloc_extended_context(struct mm_struct *mm, + unsigned long ea) +{ + int context_id; + + int index = ea >> MAX_EA_BITS_PER_CONTEXT; + + context_id = hash__alloc_context_id(); + if (context_id < 0) + return context_id; + + VM_WARN_ON(mm->context.extended_id[index]); + mm->context.extended_id[index] = context_id; + return context_id; +} + +static inline bool need_extra_context(struct mm_struct *mm, unsigned long ea) +{ + int context_id; + + context_id = get_user_context(&mm->context, ea); + if (!context_id) + return true; + return false; +} + +#else +extern void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk); +extern unsigned long __init_new_context(void); +extern void __destroy_context(unsigned long context_id); +extern void mmu_context_init(void); +static inline int alloc_extended_context(struct mm_struct *mm, + unsigned long ea) +{ + /* non book3s_64 should never find this called */ + WARN_ON(1); + return -ENOMEM; +} + +static inline bool need_extra_context(struct mm_struct *mm, unsigned long ea) +{ + return false; +} +#endif + +#if defined(CONFIG_KVM_BOOK3S_HV_POSSIBLE) && defined(CONFIG_PPC_RADIX_MMU) +extern void radix_kvm_prefetch_workaround(struct mm_struct *mm); +#else +static inline void radix_kvm_prefetch_workaround(struct mm_struct *mm) { } +#endif + +extern void switch_cop(struct mm_struct *next); +extern int use_cop(unsigned long acop, struct mm_struct *mm); +extern void drop_cop(unsigned long acop, struct mm_struct *mm); + +#ifdef CONFIG_PPC_BOOK3S_64 +static inline void inc_mm_active_cpus(struct mm_struct *mm) +{ + atomic_inc(&mm->context.active_cpus); +} + +static inline void dec_mm_active_cpus(struct mm_struct *mm) +{ + atomic_dec(&mm->context.active_cpus); +} + +static inline void mm_context_add_copro(struct mm_struct *mm) +{ + /* + * If any copro is in use, increment the active CPU count + * in order to force TLB invalidations to be global as to + * propagate to the Nest MMU. + */ + if (atomic_inc_return(&mm->context.copros) == 1) + inc_mm_active_cpus(mm); +} + +static inline void mm_context_remove_copro(struct mm_struct *mm) +{ + int c; + + /* + * When removing the last copro, we need to broadcast a global + * flush of the full mm, as the next TLBI may be local and the + * nMMU and/or PSL need to be cleaned up. + * + * Both the 'copros' and 'active_cpus' counts are looked at in + * flush_all_mm() to determine the scope (local/global) of the + * TLBIs, so we need to flush first before decrementing + * 'copros'. If this API is used by several callers for the + * same context, it can lead to over-flushing. It's hopefully + * not common enough to be a problem. + * + * Skip on hash, as we don't know how to do the proper flush + * for the time being. Invalidations will remain global if + * used on hash. Note that we can't drop 'copros' either, as + * it could make some invalidations local with no flush + * in-between. + */ + if (radix_enabled()) { + flush_all_mm(mm); + + c = atomic_dec_if_positive(&mm->context.copros); + /* Detect imbalance between add and remove */ + WARN_ON(c < 0); + + if (c == 0) + dec_mm_active_cpus(mm); + } +} + +/* + * vas_windows counter shows number of open windows in the mm + * context. During context switch, use this counter to clear the + * foreign real address mapping (CP_ABORT) for the thread / process + * that intend to use COPY/PASTE. When a process closes all windows, + * disable CP_ABORT which is expensive to run. + * + * For user context, register a copro so that TLBIs are seen by the + * nest MMU. mm_context_add/remove_vas_window() are used only for user + * space windows. + */ +static inline void mm_context_add_vas_window(struct mm_struct *mm) +{ + atomic_inc(&mm->context.vas_windows); + mm_context_add_copro(mm); +} + +static inline void mm_context_remove_vas_window(struct mm_struct *mm) +{ + int v; + + mm_context_remove_copro(mm); + v = atomic_dec_if_positive(&mm->context.vas_windows); + + /* Detect imbalance between add and remove */ + WARN_ON(v < 0); +} +#else +static inline void inc_mm_active_cpus(struct mm_struct *mm) { } +static inline void dec_mm_active_cpus(struct mm_struct *mm) { } +static inline void mm_context_add_copro(struct mm_struct *mm) { } +static inline void mm_context_remove_copro(struct mm_struct *mm) { } +#endif + + +extern void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk); + +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + unsigned long flags; + + local_irq_save(flags); + switch_mm_irqs_off(prev, next, tsk); + local_irq_restore(flags); +} +#define switch_mm_irqs_off switch_mm_irqs_off + + +#define deactivate_mm(tsk,mm) do { } while (0) + +/* + * After we have set current->mm to a new value, this activates + * the context for the new mm so we see the new mappings. + */ +static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next) +{ + switch_mm_irqs_off(prev, next, current); +} + +/* We don't currently use enter_lazy_tlb() for anything */ +static inline void enter_lazy_tlb(struct mm_struct *mm, + struct task_struct *tsk) +{ + /* 64-bit Book3E keeps track of current PGD in the PACA */ +#ifdef CONFIG_PPC_BOOK3E_64 + get_paca()->pgd = NULL; +#endif +} + +extern void arch_exit_mmap(struct mm_struct *mm); + +static inline void arch_unmap(struct mm_struct *mm, + unsigned long start, unsigned long end) +{ + if (start <= mm->context.vdso_base && mm->context.vdso_base < end) + mm->context.vdso_base = 0; +} + +#ifdef CONFIG_PPC_MEM_KEYS +bool arch_vma_access_permitted(struct vm_area_struct *vma, bool write, + bool execute, bool foreign); +void arch_dup_pkeys(struct mm_struct *oldmm, struct mm_struct *mm); +#else /* CONFIG_PPC_MEM_KEYS */ +static inline bool arch_vma_access_permitted(struct vm_area_struct *vma, + bool write, bool execute, bool foreign) +{ + /* by default, allow everything */ + return true; +} + +#define pkey_mm_init(mm) +#define thread_pkey_regs_save(thread) +#define thread_pkey_regs_restore(new_thread, old_thread) +#define thread_pkey_regs_init(thread) +#define arch_dup_pkeys(oldmm, mm) + +static inline u64 pte_to_hpte_pkey_bits(u64 pteflags) +{ + return 0x0UL; +} + +#endif /* CONFIG_PPC_MEM_KEYS */ + +static inline int arch_dup_mmap(struct mm_struct *oldmm, + struct mm_struct *mm) +{ + arch_dup_pkeys(oldmm, mm); + return 0; +} + +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_MMU_CONTEXT_H */ diff --git a/arch/powerpc/include/asm/mmzone.h b/arch/powerpc/include/asm/mmzone.h new file mode 100644 index 000000000..6cda76b57 --- /dev/null +++ b/arch/powerpc/include/asm/mmzone.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99 + * + * PowerPC64 port: + * Copyright (C) 2002 Anton Blanchard, IBM Corp. + */ +#ifndef _ASM_MMZONE_H_ +#define _ASM_MMZONE_H_ +#ifdef __KERNEL__ + +#include <linux/cpumask.h> + +/* + * generic non-linear memory support: + * + * 1) we will not split memory into more chunks than will fit into the + * flags field of the struct page + */ + +#ifdef CONFIG_NEED_MULTIPLE_NODES + +extern struct pglist_data *node_data[]; +/* + * Return a pointer to the node data for node n. + */ +#define NODE_DATA(nid) (node_data[nid]) + +/* + * Following are specific to this numa platform. + */ + +extern int numa_cpu_lookup_table[]; +extern cpumask_var_t node_to_cpumask_map[]; +#ifdef CONFIG_MEMORY_HOTPLUG +extern unsigned long max_pfn; +u64 memory_hotplug_max(void); +#else +#define memory_hotplug_max() memblock_end_of_DRAM() +#endif + +#else +#define memory_hotplug_max() memblock_end_of_DRAM() +#endif /* CONFIG_NEED_MULTIPLE_NODES */ +#ifdef CONFIG_FA_DUMP +#define __HAVE_ARCH_RESERVED_KERNEL_PAGES +#endif + +#ifdef CONFIG_MEMORY_HOTPLUG +extern int create_section_mapping(unsigned long start, unsigned long end, + int nid, pgprot_t prot); +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_MMZONE_H_ */ diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h new file mode 100644 index 000000000..857d9ff24 --- /dev/null +++ b/arch/powerpc/include/asm/module.h @@ -0,0 +1,87 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_MODULE_H +#define _ASM_POWERPC_MODULE_H +#ifdef __KERNEL__ + +#include <linux/list.h> +#include <asm/bug.h> +#include <asm-generic/module.h> + +#ifndef __powerpc64__ +/* + * Thanks to Paul M for explaining this. + * + * PPC can only do rel jumps += 32MB, and often the kernel and other + * modules are further away than this. So, we jump to a table of + * trampolines attached to the module (the Procedure Linkage Table) + * whenever that happens. + */ + +struct ppc_plt_entry { + /* 16 byte jump instruction sequence (4 instructions) */ + unsigned int jump[4]; +}; +#endif /* __powerpc64__ */ + + +struct mod_arch_specific { +#ifdef __powerpc64__ + unsigned int stubs_section; /* Index of stubs section in module */ + unsigned int toc_section; /* What section is the TOC? */ + bool toc_fixed; /* Have we fixed up .TOC.? */ + + /* For module function descriptor dereference */ + unsigned long start_opd; + unsigned long end_opd; +#else /* powerpc64 */ + /* Indices of PLT sections within module. */ + unsigned int core_plt_section; + unsigned int init_plt_section; +#endif /* powerpc64 */ + +#ifdef CONFIG_DYNAMIC_FTRACE + unsigned long tramp; +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS + unsigned long tramp_regs; +#endif +#endif + + /* List of BUG addresses, source line numbers and filenames */ + struct list_head bug_list; + struct bug_entry *bug_table; + unsigned int num_bugs; +}; + +/* + * Select ELF headers. + * Make empty section for module_frob_arch_sections to expand. + */ + +#ifdef __powerpc64__ +# ifdef MODULE + asm(".section .stubs,\"ax\",@nobits; .align 3; .previous"); +# endif +#else +# ifdef MODULE + asm(".section .plt,\"ax\",@nobits; .align 3; .previous"); + asm(".section .init.plt,\"ax\",@nobits; .align 3; .previous"); +# endif /* MODULE */ +#endif + +#ifdef CONFIG_DYNAMIC_FTRACE +# ifdef MODULE + asm(".section .ftrace.tramp,\"ax\",@nobits; .align 3; .previous"); +# endif /* MODULE */ + +int module_trampoline_target(struct module *mod, unsigned long trampoline, + unsigned long *target); +int module_finalize_ftrace(struct module *mod, const Elf_Shdr *sechdrs); +#else +static inline int module_finalize_ftrace(struct module *mod, const Elf_Shdr *sechdrs) +{ + return 0; +} +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_MODULE_H */ diff --git a/arch/powerpc/include/asm/module.lds.h b/arch/powerpc/include/asm/module.lds.h new file mode 100644 index 000000000..cea5dc124 --- /dev/null +++ b/arch/powerpc/include/asm/module.lds.h @@ -0,0 +1,8 @@ +/* Force alignment of .toc section. */ +SECTIONS +{ + .toc 0 : ALIGN(256) + { + *(.got .toc) + } +} diff --git a/arch/powerpc/include/asm/mpc5121.h b/arch/powerpc/include/asm/mpc5121.h new file mode 100644 index 000000000..9ae49e743 --- /dev/null +++ b/arch/powerpc/include/asm/mpc5121.h @@ -0,0 +1,120 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * MPC5121 Prototypes and definitions + */ + +#ifndef __ASM_POWERPC_MPC5121_H__ +#define __ASM_POWERPC_MPC5121_H__ + +/* MPC512x Reset module registers */ +struct mpc512x_reset_module { + u32 rcwlr; /* Reset Configuration Word Low Register */ + u32 rcwhr; /* Reset Configuration Word High Register */ + u32 reserved1; + u32 reserved2; + u32 rsr; /* Reset Status Register */ + u32 rmr; /* Reset Mode Register */ + u32 rpr; /* Reset Protection Register */ + u32 rcr; /* Reset Control Register */ + u32 rcer; /* Reset Control Enable Register */ +}; + +/* + * Clock Control Module + */ +struct mpc512x_ccm { + u32 spmr; /* System PLL Mode Register */ + u32 sccr1; /* System Clock Control Register 1 */ + u32 sccr2; /* System Clock Control Register 2 */ + u32 scfr1; /* System Clock Frequency Register 1 */ + u32 scfr2; /* System Clock Frequency Register 2 */ + u32 scfr2s; /* System Clock Frequency Shadow Register 2 */ + u32 bcr; /* Bread Crumb Register */ + u32 psc_ccr[12]; /* PSC Clock Control Registers */ + u32 spccr; /* SPDIF Clock Control Register */ + u32 cccr; /* CFM Clock Control Register */ + u32 dccr; /* DIU Clock Control Register */ + u32 mscan_ccr[4]; /* MSCAN Clock Control Registers */ + u32 out_ccr[4]; /* OUT CLK Configure Registers */ + u32 rsv0[2]; /* Reserved */ + u32 scfr3; /* System Clock Frequency Register 3 */ + u32 rsv1[3]; /* Reserved */ + u32 spll_lock_cnt; /* System PLL Lock Counter */ + u8 res[0x6c]; /* Reserved */ +}; + +/* + * LPC Module + */ +struct mpc512x_lpc { + u32 cs_cfg[8]; /* CS config */ + u32 cs_ctrl; /* CS Control Register */ + u32 cs_status; /* CS Status Register */ + u32 burst_ctrl; /* CS Burst Control Register */ + u32 deadcycle_ctrl; /* CS Deadcycle Control Register */ + u32 holdcycle_ctrl; /* CS Holdcycle Control Register */ + u32 alt; /* Address Latch Timing Register */ +}; + +int mpc512x_cs_config(unsigned int cs, u32 val); + +/* + * SCLPC Module (LPB FIFO) + */ +struct mpc512x_lpbfifo { + u32 pkt_size; /* SCLPC Packet Size Register */ + u32 start_addr; /* SCLPC Start Address Register */ + u32 ctrl; /* SCLPC Control Register */ + u32 enable; /* SCLPC Enable Register */ + u32 reserved1; + u32 status; /* SCLPC Status Register */ + u32 bytes_done; /* SCLPC Bytes Done Register */ + u32 emb_sc; /* EMB Share Counter Register */ + u32 emb_pc; /* EMB Pause Control Register */ + u32 reserved2[7]; + u32 data_word; /* LPC RX/TX FIFO Data Word Register */ + u32 fifo_status; /* LPC RX/TX FIFO Status Register */ + u32 fifo_ctrl; /* LPC RX/TX FIFO Control Register */ + u32 fifo_alarm; /* LPC RX/TX FIFO Alarm Register */ +}; + +#define MPC512X_SCLPC_START (1 << 31) +#define MPC512X_SCLPC_CS(x) (((x) & 0x7) << 24) +#define MPC512X_SCLPC_FLUSH (1 << 17) +#define MPC512X_SCLPC_READ (1 << 16) +#define MPC512X_SCLPC_DAI (1 << 8) +#define MPC512X_SCLPC_BPT(x) ((x) & 0x3f) +#define MPC512X_SCLPC_RESET (1 << 24) +#define MPC512X_SCLPC_FIFO_RESET (1 << 16) +#define MPC512X_SCLPC_ABORT_INT_ENABLE (1 << 9) +#define MPC512X_SCLPC_NORM_INT_ENABLE (1 << 8) +#define MPC512X_SCLPC_ENABLE (1 << 0) +#define MPC512X_SCLPC_SUCCESS (1 << 24) +#define MPC512X_SCLPC_FIFO_CTRL(x) (((x) & 0x7) << 24) +#define MPC512X_SCLPC_FIFO_ALARM(x) ((x) & 0x3ff) + +enum lpb_dev_portsize { + LPB_DEV_PORTSIZE_UNDEFINED = 0, + LPB_DEV_PORTSIZE_1_BYTE = 1, + LPB_DEV_PORTSIZE_2_BYTES = 2, + LPB_DEV_PORTSIZE_4_BYTES = 4, + LPB_DEV_PORTSIZE_8_BYTES = 8 +}; + +enum mpc512x_lpbfifo_req_dir { + MPC512X_LPBFIFO_REQ_DIR_READ, + MPC512X_LPBFIFO_REQ_DIR_WRITE +}; + +struct mpc512x_lpbfifo_request { + phys_addr_t dev_phys_addr; /* physical address of some device on LPB */ + void *ram_virt_addr; /* virtual address of some region in RAM */ + u32 size; + enum lpb_dev_portsize portsize; + enum mpc512x_lpbfifo_req_dir dir; + void (*callback)(struct mpc512x_lpbfifo_request *); +}; + +int mpc512x_lpbfifo_submit(struct mpc512x_lpbfifo_request *req); + +#endif /* __ASM_POWERPC_MPC5121_H__ */ diff --git a/arch/powerpc/include/asm/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h new file mode 100644 index 000000000..ce1e0aaba --- /dev/null +++ b/arch/powerpc/include/asm/mpc52xx.h @@ -0,0 +1,365 @@ +/* + * Prototypes, etc. for the Freescale MPC52xx embedded cpu chips + * May need to be cleaned as the port goes on ... + * + * Copyright (C) 2004-2005 Sylvain Munaut <tnt@246tNt.com> + * Copyright (C) 2003 MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __ASM_POWERPC_MPC52xx_H__ +#define __ASM_POWERPC_MPC52xx_H__ + +#ifndef __ASSEMBLY__ +#include <asm/types.h> +#include <asm/prom.h> +#include <asm/mpc5xxx.h> +#endif /* __ASSEMBLY__ */ + +#include <linux/suspend.h> + +/* Variants of the 5200(B) */ +#define MPC5200_SVR 0x80110010 +#define MPC5200_SVR_MASK 0xfffffff0 +#define MPC5200B_SVR 0x80110020 +#define MPC5200B_SVR_MASK 0xfffffff0 + +/* ======================================================================== */ +/* Structures mapping of some unit register set */ +/* ======================================================================== */ + +#ifndef __ASSEMBLY__ + +/* Memory Mapping Control */ +struct mpc52xx_mmap_ctl { + u32 mbar; /* MMAP_CTRL + 0x00 */ + + u32 cs0_start; /* MMAP_CTRL + 0x04 */ + u32 cs0_stop; /* MMAP_CTRL + 0x08 */ + u32 cs1_start; /* MMAP_CTRL + 0x0c */ + u32 cs1_stop; /* MMAP_CTRL + 0x10 */ + u32 cs2_start; /* MMAP_CTRL + 0x14 */ + u32 cs2_stop; /* MMAP_CTRL + 0x18 */ + u32 cs3_start; /* MMAP_CTRL + 0x1c */ + u32 cs3_stop; /* MMAP_CTRL + 0x20 */ + u32 cs4_start; /* MMAP_CTRL + 0x24 */ + u32 cs4_stop; /* MMAP_CTRL + 0x28 */ + u32 cs5_start; /* MMAP_CTRL + 0x2c */ + u32 cs5_stop; /* MMAP_CTRL + 0x30 */ + + u32 sdram0; /* MMAP_CTRL + 0x34 */ + u32 sdram1; /* MMAP_CTRL + 0X38 */ + + u32 reserved[4]; /* MMAP_CTRL + 0x3c .. 0x48 */ + + u32 boot_start; /* MMAP_CTRL + 0x4c */ + u32 boot_stop; /* MMAP_CTRL + 0x50 */ + + u32 ipbi_ws_ctrl; /* MMAP_CTRL + 0x54 */ + + u32 cs6_start; /* MMAP_CTRL + 0x58 */ + u32 cs6_stop; /* MMAP_CTRL + 0x5c */ + u32 cs7_start; /* MMAP_CTRL + 0x60 */ + u32 cs7_stop; /* MMAP_CTRL + 0x64 */ +}; + +/* SDRAM control */ +struct mpc52xx_sdram { + u32 mode; /* SDRAM + 0x00 */ + u32 ctrl; /* SDRAM + 0x04 */ + u32 config1; /* SDRAM + 0x08 */ + u32 config2; /* SDRAM + 0x0c */ +}; + +/* SDMA */ +struct mpc52xx_sdma { + u32 taskBar; /* SDMA + 0x00 */ + u32 currentPointer; /* SDMA + 0x04 */ + u32 endPointer; /* SDMA + 0x08 */ + u32 variablePointer; /* SDMA + 0x0c */ + + u8 IntVect1; /* SDMA + 0x10 */ + u8 IntVect2; /* SDMA + 0x11 */ + u16 PtdCntrl; /* SDMA + 0x12 */ + + u32 IntPend; /* SDMA + 0x14 */ + u32 IntMask; /* SDMA + 0x18 */ + + u16 tcr[16]; /* SDMA + 0x1c .. 0x3a */ + + u8 ipr[32]; /* SDMA + 0x3c .. 0x5b */ + + u32 cReqSelect; /* SDMA + 0x5c */ + u32 task_size0; /* SDMA + 0x60 */ + u32 task_size1; /* SDMA + 0x64 */ + u32 MDEDebug; /* SDMA + 0x68 */ + u32 ADSDebug; /* SDMA + 0x6c */ + u32 Value1; /* SDMA + 0x70 */ + u32 Value2; /* SDMA + 0x74 */ + u32 Control; /* SDMA + 0x78 */ + u32 Status; /* SDMA + 0x7c */ + u32 PTDDebug; /* SDMA + 0x80 */ +}; + +/* GPT */ +struct mpc52xx_gpt { + u32 mode; /* GPTx + 0x00 */ + u32 count; /* GPTx + 0x04 */ + u32 pwm; /* GPTx + 0x08 */ + u32 status; /* GPTx + 0X0c */ +}; + +/* GPIO */ +struct mpc52xx_gpio { + u32 port_config; /* GPIO + 0x00 */ + u32 simple_gpioe; /* GPIO + 0x04 */ + u32 simple_ode; /* GPIO + 0x08 */ + u32 simple_ddr; /* GPIO + 0x0c */ + u32 simple_dvo; /* GPIO + 0x10 */ + u32 simple_ival; /* GPIO + 0x14 */ + u8 outo_gpioe; /* GPIO + 0x18 */ + u8 reserved1[3]; /* GPIO + 0x19 */ + u8 outo_dvo; /* GPIO + 0x1c */ + u8 reserved2[3]; /* GPIO + 0x1d */ + u8 sint_gpioe; /* GPIO + 0x20 */ + u8 reserved3[3]; /* GPIO + 0x21 */ + u8 sint_ode; /* GPIO + 0x24 */ + u8 reserved4[3]; /* GPIO + 0x25 */ + u8 sint_ddr; /* GPIO + 0x28 */ + u8 reserved5[3]; /* GPIO + 0x29 */ + u8 sint_dvo; /* GPIO + 0x2c */ + u8 reserved6[3]; /* GPIO + 0x2d */ + u8 sint_inten; /* GPIO + 0x30 */ + u8 reserved7[3]; /* GPIO + 0x31 */ + u16 sint_itype; /* GPIO + 0x34 */ + u16 reserved8; /* GPIO + 0x36 */ + u8 gpio_control; /* GPIO + 0x38 */ + u8 reserved9[3]; /* GPIO + 0x39 */ + u8 sint_istat; /* GPIO + 0x3c */ + u8 sint_ival; /* GPIO + 0x3d */ + u8 bus_errs; /* GPIO + 0x3e */ + u8 reserved10; /* GPIO + 0x3f */ +}; + +#define MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD 4 +#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD 5 +#define MPC52xx_GPIO_PCI_DIS (1<<15) + +/* GPIO with WakeUp*/ +struct mpc52xx_gpio_wkup { + u8 wkup_gpioe; /* GPIO_WKUP + 0x00 */ + u8 reserved1[3]; /* GPIO_WKUP + 0x03 */ + u8 wkup_ode; /* GPIO_WKUP + 0x04 */ + u8 reserved2[3]; /* GPIO_WKUP + 0x05 */ + u8 wkup_ddr; /* GPIO_WKUP + 0x08 */ + u8 reserved3[3]; /* GPIO_WKUP + 0x09 */ + u8 wkup_dvo; /* GPIO_WKUP + 0x0C */ + u8 reserved4[3]; /* GPIO_WKUP + 0x0D */ + u8 wkup_inten; /* GPIO_WKUP + 0x10 */ + u8 reserved5[3]; /* GPIO_WKUP + 0x11 */ + u8 wkup_iinten; /* GPIO_WKUP + 0x14 */ + u8 reserved6[3]; /* GPIO_WKUP + 0x15 */ + u16 wkup_itype; /* GPIO_WKUP + 0x18 */ + u8 reserved7[2]; /* GPIO_WKUP + 0x1A */ + u8 wkup_maste; /* GPIO_WKUP + 0x1C */ + u8 reserved8[3]; /* GPIO_WKUP + 0x1D */ + u8 wkup_ival; /* GPIO_WKUP + 0x20 */ + u8 reserved9[3]; /* GPIO_WKUP + 0x21 */ + u8 wkup_istat; /* GPIO_WKUP + 0x24 */ + u8 reserved10[3]; /* GPIO_WKUP + 0x25 */ +}; + +/* XLB Bus control */ +struct mpc52xx_xlb { + u8 reserved[0x40]; + u32 config; /* XLB + 0x40 */ + u32 version; /* XLB + 0x44 */ + u32 status; /* XLB + 0x48 */ + u32 int_enable; /* XLB + 0x4c */ + u32 addr_capture; /* XLB + 0x50 */ + u32 bus_sig_capture; /* XLB + 0x54 */ + u32 addr_timeout; /* XLB + 0x58 */ + u32 data_timeout; /* XLB + 0x5c */ + u32 bus_act_timeout; /* XLB + 0x60 */ + u32 master_pri_enable; /* XLB + 0x64 */ + u32 master_priority; /* XLB + 0x68 */ + u32 base_address; /* XLB + 0x6c */ + u32 snoop_window; /* XLB + 0x70 */ +}; + +#define MPC52xx_XLB_CFG_PLDIS (1 << 31) +#define MPC52xx_XLB_CFG_SNOOP (1 << 15) + +/* Clock Distribution control */ +struct mpc52xx_cdm { + u32 jtag_id; /* CDM + 0x00 reg0 read only */ + u32 rstcfg; /* CDM + 0x04 reg1 read only */ + u32 breadcrumb; /* CDM + 0x08 reg2 */ + + u8 mem_clk_sel; /* CDM + 0x0c reg3 byte0 */ + u8 xlb_clk_sel; /* CDM + 0x0d reg3 byte1 read only */ + u8 ipb_clk_sel; /* CDM + 0x0e reg3 byte2 */ + u8 pci_clk_sel; /* CDM + 0x0f reg3 byte3 */ + + u8 ext_48mhz_en; /* CDM + 0x10 reg4 byte0 */ + u8 fd_enable; /* CDM + 0x11 reg4 byte1 */ + u16 fd_counters; /* CDM + 0x12 reg4 byte2,3 */ + + u32 clk_enables; /* CDM + 0x14 reg5 */ + + u8 osc_disable; /* CDM + 0x18 reg6 byte0 */ + u8 reserved0[3]; /* CDM + 0x19 reg6 byte1,2,3 */ + + u8 ccs_sleep_enable; /* CDM + 0x1c reg7 byte0 */ + u8 osc_sleep_enable; /* CDM + 0x1d reg7 byte1 */ + u8 reserved1; /* CDM + 0x1e reg7 byte2 */ + u8 ccs_qreq_test; /* CDM + 0x1f reg7 byte3 */ + + u8 soft_reset; /* CDM + 0x20 u8 byte0 */ + u8 no_ckstp; /* CDM + 0x21 u8 byte0 */ + u8 reserved2[2]; /* CDM + 0x22 u8 byte1,2,3 */ + + u8 pll_lock; /* CDM + 0x24 reg9 byte0 */ + u8 pll_looselock; /* CDM + 0x25 reg9 byte1 */ + u8 pll_sm_lockwin; /* CDM + 0x26 reg9 byte2 */ + u8 reserved3; /* CDM + 0x27 reg9 byte3 */ + + u16 reserved4; /* CDM + 0x28 reg10 byte0,1 */ + u16 mclken_div_psc1; /* CDM + 0x2a reg10 byte2,3 */ + + u16 reserved5; /* CDM + 0x2c reg11 byte0,1 */ + u16 mclken_div_psc2; /* CDM + 0x2e reg11 byte2,3 */ + + u16 reserved6; /* CDM + 0x30 reg12 byte0,1 */ + u16 mclken_div_psc3; /* CDM + 0x32 reg12 byte2,3 */ + + u16 reserved7; /* CDM + 0x34 reg13 byte0,1 */ + u16 mclken_div_psc6; /* CDM + 0x36 reg13 byte2,3 */ +}; + +/* Interrupt controller Register set */ +struct mpc52xx_intr { + u32 per_mask; /* INTR + 0x00 */ + u32 per_pri1; /* INTR + 0x04 */ + u32 per_pri2; /* INTR + 0x08 */ + u32 per_pri3; /* INTR + 0x0c */ + u32 ctrl; /* INTR + 0x10 */ + u32 main_mask; /* INTR + 0x14 */ + u32 main_pri1; /* INTR + 0x18 */ + u32 main_pri2; /* INTR + 0x1c */ + u32 reserved1; /* INTR + 0x20 */ + u32 enc_status; /* INTR + 0x24 */ + u32 crit_status; /* INTR + 0x28 */ + u32 main_status; /* INTR + 0x2c */ + u32 per_status; /* INTR + 0x30 */ + u32 reserved2; /* INTR + 0x34 */ + u32 per_error; /* INTR + 0x38 */ +}; + +#endif /* __ASSEMBLY__ */ + + +/* ========================================================================= */ +/* Prototypes for MPC52xx sysdev */ +/* ========================================================================= */ + +#ifndef __ASSEMBLY__ + +/* mpc52xx_common.c */ +extern void mpc5200_setup_xlb_arbiter(void); +extern void mpc52xx_declare_of_platform_devices(void); +extern int mpc5200_psc_ac97_gpio_reset(int psc_number); +extern void mpc52xx_map_common_devices(void); +extern int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv); +extern unsigned int mpc52xx_get_xtal_freq(struct device_node *node); +extern void __noreturn mpc52xx_restart(char *cmd); + +/* mpc52xx_gpt.c */ +struct mpc52xx_gpt_priv; +extern struct mpc52xx_gpt_priv *mpc52xx_gpt_from_irq(int irq); +extern int mpc52xx_gpt_start_timer(struct mpc52xx_gpt_priv *gpt, u64 period, + int continuous); +extern u64 mpc52xx_gpt_timer_period(struct mpc52xx_gpt_priv *gpt); +extern int mpc52xx_gpt_stop_timer(struct mpc52xx_gpt_priv *gpt); + +/* mpc52xx_lpbfifo.c */ +#define MPC52XX_LPBFIFO_FLAG_READ (0) +#define MPC52XX_LPBFIFO_FLAG_WRITE (1<<0) +#define MPC52XX_LPBFIFO_FLAG_NO_INCREMENT (1<<1) +#define MPC52XX_LPBFIFO_FLAG_NO_DMA (1<<2) +#define MPC52XX_LPBFIFO_FLAG_POLL_DMA (1<<3) + +struct mpc52xx_lpbfifo_request { + struct list_head list; + + /* localplus bus address */ + unsigned int cs; + size_t offset; + + /* Memory address */ + void *data; + phys_addr_t data_phys; + + /* Details of transfer */ + size_t size; + size_t pos; /* current position of transfer */ + int flags; + int defer_xfer_start; + + /* What to do when finished */ + void (*callback)(struct mpc52xx_lpbfifo_request *); + + void *priv; /* Driver private data */ + + /* statistics */ + int irq_count; + int irq_ticks; + u8 last_byte; + int buffer_not_done_cnt; +}; + +extern int mpc52xx_lpbfifo_submit(struct mpc52xx_lpbfifo_request *req); +extern void mpc52xx_lpbfifo_abort(struct mpc52xx_lpbfifo_request *req); +extern void mpc52xx_lpbfifo_poll(void); +extern int mpc52xx_lpbfifo_start_xfer(struct mpc52xx_lpbfifo_request *req); + +/* mpc52xx_pic.c */ +extern void mpc52xx_init_irq(void); +extern unsigned int mpc52xx_get_irq(void); + +/* mpc52xx_pci.c */ +#ifdef CONFIG_PCI +extern int __init mpc52xx_add_bridge(struct device_node *node); +extern void __init mpc52xx_setup_pci(void); +#else +static inline void mpc52xx_setup_pci(void) { } +#endif + +#endif /* __ASSEMBLY__ */ + +#ifdef CONFIG_PM +struct mpc52xx_suspend { + void (*board_suspend_prepare)(void __iomem *mbar); + void (*board_resume_finish)(void __iomem *mbar); +}; + +extern struct mpc52xx_suspend mpc52xx_suspend; +extern int __init mpc52xx_pm_init(void); +extern int mpc52xx_set_wakeup_gpio(u8 pin, u8 level); + +/* lite5200 calls mpc5200 suspend functions, so here they are */ +extern int mpc52xx_pm_prepare(void); +extern int mpc52xx_pm_enter(suspend_state_t); +extern void mpc52xx_pm_finish(void); +extern char saved_sram[0x4000]; /* reuse buffer from mpc52xx suspend */ + +#ifdef CONFIG_PPC_LITE5200 +int __init lite5200_pm_init(void); +#endif +#endif /* CONFIG_PM */ + +#endif /* __ASM_POWERPC_MPC52xx_H__ */ + diff --git a/arch/powerpc/include/asm/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h new file mode 100644 index 000000000..ec995b289 --- /dev/null +++ b/arch/powerpc/include/asm/mpc52xx_psc.h @@ -0,0 +1,352 @@ +/* + * include/asm-ppc/mpc52xx_psc.h + * + * Definitions of consts/structs to drive the Freescale MPC52xx OnChip + * PSCs. Theses are shared between multiple drivers since a PSC can be + * UART, AC97, IR, I2S, ... So this header is in asm-ppc. + * + * + * Maintainer : Sylvain Munaut <tnt@246tNt.com> + * + * Based/Extracted from some header of the 2.4 originally written by + * Dale Farnsworth <dfarnsworth@mvista.com> + * + * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com> + * Copyright (C) 2003 MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __ASM_MPC52xx_PSC_H__ +#define __ASM_MPC52xx_PSC_H__ + +#include <asm/types.h> + +/* Max number of PSCs */ +#ifdef CONFIG_PPC_MPC512x +#define MPC52xx_PSC_MAXNUM 12 +#else +#define MPC52xx_PSC_MAXNUM 6 +#endif + +/* Programmable Serial Controller (PSC) status register bits */ +#define MPC52xx_PSC_SR_UNEX_RX 0x0001 +#define MPC52xx_PSC_SR_DATA_VAL 0x0002 +#define MPC52xx_PSC_SR_DATA_OVR 0x0004 +#define MPC52xx_PSC_SR_CMDSEND 0x0008 +#define MPC52xx_PSC_SR_CDE 0x0080 +#define MPC52xx_PSC_SR_RXRDY 0x0100 +#define MPC52xx_PSC_SR_RXFULL 0x0200 +#define MPC52xx_PSC_SR_TXRDY 0x0400 +#define MPC52xx_PSC_SR_TXEMP 0x0800 +#define MPC52xx_PSC_SR_OE 0x1000 +#define MPC52xx_PSC_SR_PE 0x2000 +#define MPC52xx_PSC_SR_FE 0x4000 +#define MPC52xx_PSC_SR_RB 0x8000 + +/* PSC Command values */ +#define MPC52xx_PSC_RX_ENABLE 0x0001 +#define MPC52xx_PSC_RX_DISABLE 0x0002 +#define MPC52xx_PSC_TX_ENABLE 0x0004 +#define MPC52xx_PSC_TX_DISABLE 0x0008 +#define MPC52xx_PSC_SEL_MODE_REG_1 0x0010 +#define MPC52xx_PSC_RST_RX 0x0020 +#define MPC52xx_PSC_RST_TX 0x0030 +#define MPC52xx_PSC_RST_ERR_STAT 0x0040 +#define MPC52xx_PSC_RST_BRK_CHG_INT 0x0050 +#define MPC52xx_PSC_START_BRK 0x0060 +#define MPC52xx_PSC_STOP_BRK 0x0070 + +/* PSC TxRx FIFO status bits */ +#define MPC52xx_PSC_RXTX_FIFO_ERR 0x0040 +#define MPC52xx_PSC_RXTX_FIFO_UF 0x0020 +#define MPC52xx_PSC_RXTX_FIFO_OF 0x0010 +#define MPC52xx_PSC_RXTX_FIFO_FR 0x0008 +#define MPC52xx_PSC_RXTX_FIFO_FULL 0x0004 +#define MPC52xx_PSC_RXTX_FIFO_ALARM 0x0002 +#define MPC52xx_PSC_RXTX_FIFO_EMPTY 0x0001 + +/* PSC interrupt status/mask bits */ +#define MPC52xx_PSC_IMR_UNEX_RX_SLOT 0x0001 +#define MPC52xx_PSC_IMR_DATA_VALID 0x0002 +#define MPC52xx_PSC_IMR_DATA_OVR 0x0004 +#define MPC52xx_PSC_IMR_CMD_SEND 0x0008 +#define MPC52xx_PSC_IMR_ERROR 0x0040 +#define MPC52xx_PSC_IMR_DEOF 0x0080 +#define MPC52xx_PSC_IMR_TXRDY 0x0100 +#define MPC52xx_PSC_IMR_RXRDY 0x0200 +#define MPC52xx_PSC_IMR_DB 0x0400 +#define MPC52xx_PSC_IMR_TXEMP 0x0800 +#define MPC52xx_PSC_IMR_ORERR 0x1000 +#define MPC52xx_PSC_IMR_IPC 0x8000 + +/* PSC input port change bits */ +#define MPC52xx_PSC_CTS 0x01 +#define MPC52xx_PSC_DCD 0x02 +#define MPC52xx_PSC_D_CTS 0x10 +#define MPC52xx_PSC_D_DCD 0x20 + +/* PSC acr bits */ +#define MPC52xx_PSC_IEC_CTS 0x01 +#define MPC52xx_PSC_IEC_DCD 0x02 + +/* PSC output port bits */ +#define MPC52xx_PSC_OP_RTS 0x01 +#define MPC52xx_PSC_OP_RES 0x02 + +/* PSC mode fields */ +#define MPC52xx_PSC_MODE_5_BITS 0x00 +#define MPC52xx_PSC_MODE_6_BITS 0x01 +#define MPC52xx_PSC_MODE_7_BITS 0x02 +#define MPC52xx_PSC_MODE_8_BITS 0x03 +#define MPC52xx_PSC_MODE_BITS_MASK 0x03 +#define MPC52xx_PSC_MODE_PAREVEN 0x00 +#define MPC52xx_PSC_MODE_PARODD 0x04 +#define MPC52xx_PSC_MODE_PARFORCE 0x08 +#define MPC52xx_PSC_MODE_PARNONE 0x10 +#define MPC52xx_PSC_MODE_ERR 0x20 +#define MPC52xx_PSC_MODE_FFULL 0x40 +#define MPC52xx_PSC_MODE_RXRTS 0x80 + +#define MPC52xx_PSC_MODE_ONE_STOP_5_BITS 0x00 +#define MPC52xx_PSC_MODE_ONE_STOP 0x07 +#define MPC52xx_PSC_MODE_TWO_STOP 0x0f +#define MPC52xx_PSC_MODE_TXCTS 0x10 + +#define MPC52xx_PSC_RFNUM_MASK 0x01ff + +#define MPC52xx_PSC_SICR_DTS1 (1 << 29) +#define MPC52xx_PSC_SICR_SHDR (1 << 28) +#define MPC52xx_PSC_SICR_SIM_MASK (0xf << 24) +#define MPC52xx_PSC_SICR_SIM_UART (0x0 << 24) +#define MPC52xx_PSC_SICR_SIM_UART_DCD (0x8 << 24) +#define MPC52xx_PSC_SICR_SIM_CODEC_8 (0x1 << 24) +#define MPC52xx_PSC_SICR_SIM_CODEC_16 (0x2 << 24) +#define MPC52xx_PSC_SICR_SIM_AC97 (0x3 << 24) +#define MPC52xx_PSC_SICR_SIM_SIR (0x8 << 24) +#define MPC52xx_PSC_SICR_SIM_SIR_DCD (0xc << 24) +#define MPC52xx_PSC_SICR_SIM_MIR (0x5 << 24) +#define MPC52xx_PSC_SICR_SIM_FIR (0x6 << 24) +#define MPC52xx_PSC_SICR_SIM_CODEC_24 (0x7 << 24) +#define MPC52xx_PSC_SICR_SIM_CODEC_32 (0xf << 24) +#define MPC52xx_PSC_SICR_ACRB (0x8 << 24) +#define MPC52xx_PSC_SICR_AWR (1 << 30) +#define MPC52xx_PSC_SICR_GENCLK (1 << 23) +#define MPC52xx_PSC_SICR_I2S (1 << 22) +#define MPC52xx_PSC_SICR_CLKPOL (1 << 21) +#define MPC52xx_PSC_SICR_SYNCPOL (1 << 20) +#define MPC52xx_PSC_SICR_CELLSLAVE (1 << 19) +#define MPC52xx_PSC_SICR_CELL2XCLK (1 << 18) +#define MPC52xx_PSC_SICR_ESAI (1 << 17) +#define MPC52xx_PSC_SICR_ENAC97 (1 << 16) +#define MPC52xx_PSC_SICR_SPI (1 << 15) +#define MPC52xx_PSC_SICR_MSTR (1 << 14) +#define MPC52xx_PSC_SICR_CPOL (1 << 13) +#define MPC52xx_PSC_SICR_CPHA (1 << 12) +#define MPC52xx_PSC_SICR_USEEOF (1 << 11) +#define MPC52xx_PSC_SICR_DISABLEEOF (1 << 10) + +/* Structure of the hardware registers */ +struct mpc52xx_psc { + union { + u8 mode; /* PSC + 0x00 */ + u8 mr2; + }; + u8 reserved0[3]; + union { /* PSC + 0x04 */ + u16 status; + u16 clock_select; + } sr_csr; +#define mpc52xx_psc_status sr_csr.status +#define mpc52xx_psc_clock_select sr_csr.clock_select + u16 reserved1; + u8 command; /* PSC + 0x08 */ + u8 reserved2[3]; + union { /* PSC + 0x0c */ + u8 buffer_8; + u16 buffer_16; + u32 buffer_32; + } buffer; +#define mpc52xx_psc_buffer_8 buffer.buffer_8 +#define mpc52xx_psc_buffer_16 buffer.buffer_16 +#define mpc52xx_psc_buffer_32 buffer.buffer_32 + union { /* PSC + 0x10 */ + u8 ipcr; + u8 acr; + } ipcr_acr; +#define mpc52xx_psc_ipcr ipcr_acr.ipcr +#define mpc52xx_psc_acr ipcr_acr.acr + u8 reserved3[3]; + union { /* PSC + 0x14 */ + u16 isr; + u16 imr; + } isr_imr; +#define mpc52xx_psc_isr isr_imr.isr +#define mpc52xx_psc_imr isr_imr.imr + u16 reserved4; + u8 ctur; /* PSC + 0x18 */ + u8 reserved5[3]; + u8 ctlr; /* PSC + 0x1c */ + u8 reserved6[3]; + /* BitClkDiv field of CCR is byte swapped in + * the hardware for mpc5200/b compatibility */ + u32 ccr; /* PSC + 0x20 */ + u32 ac97_slots; /* PSC + 0x24 */ + u32 ac97_cmd; /* PSC + 0x28 */ + u32 ac97_data; /* PSC + 0x2c */ + u8 ivr; /* PSC + 0x30 */ + u8 reserved8[3]; + u8 ip; /* PSC + 0x34 */ + u8 reserved9[3]; + u8 op1; /* PSC + 0x38 */ + u8 reserved10[3]; + u8 op0; /* PSC + 0x3c */ + u8 reserved11[3]; + u32 sicr; /* PSC + 0x40 */ + u8 ircr1; /* PSC + 0x44 */ + u8 reserved13[3]; + u8 ircr2; /* PSC + 0x44 */ + u8 reserved14[3]; + u8 irsdr; /* PSC + 0x4c */ + u8 reserved15[3]; + u8 irmdr; /* PSC + 0x50 */ + u8 reserved16[3]; + u8 irfdr; /* PSC + 0x54 */ + u8 reserved17[3]; +}; + +struct mpc52xx_psc_fifo { + u16 rfnum; /* PSC + 0x58 */ + u16 reserved18; + u16 tfnum; /* PSC + 0x5c */ + u16 reserved19; + u32 rfdata; /* PSC + 0x60 */ + u16 rfstat; /* PSC + 0x64 */ + u16 reserved20; + u8 rfcntl; /* PSC + 0x68 */ + u8 reserved21[5]; + u16 rfalarm; /* PSC + 0x6e */ + u16 reserved22; + u16 rfrptr; /* PSC + 0x72 */ + u16 reserved23; + u16 rfwptr; /* PSC + 0x76 */ + u16 reserved24; + u16 rflrfptr; /* PSC + 0x7a */ + u16 reserved25; + u16 rflwfptr; /* PSC + 0x7e */ + u32 tfdata; /* PSC + 0x80 */ + u16 tfstat; /* PSC + 0x84 */ + u16 reserved26; + u8 tfcntl; /* PSC + 0x88 */ + u8 reserved27[5]; + u16 tfalarm; /* PSC + 0x8e */ + u16 reserved28; + u16 tfrptr; /* PSC + 0x92 */ + u16 reserved29; + u16 tfwptr; /* PSC + 0x96 */ + u16 reserved30; + u16 tflrfptr; /* PSC + 0x9a */ + u16 reserved31; + u16 tflwfptr; /* PSC + 0x9e */ +}; + +#define MPC512x_PSC_FIFO_EOF 0x100 +#define MPC512x_PSC_FIFO_RESET_SLICE 0x80 +#define MPC512x_PSC_FIFO_ENABLE_SLICE 0x01 +#define MPC512x_PSC_FIFO_ENABLE_DMA 0x04 + +#define MPC512x_PSC_FIFO_EMPTY 0x1 +#define MPC512x_PSC_FIFO_FULL 0x2 +#define MPC512x_PSC_FIFO_ALARM 0x4 +#define MPC512x_PSC_FIFO_URERR 0x8 + +struct mpc512x_psc_fifo { + u32 reserved1[10]; + u32 txcmd; /* PSC + 0x80 */ + u32 txalarm; /* PSC + 0x84 */ + u32 txsr; /* PSC + 0x88 */ + u32 txisr; /* PSC + 0x8c */ + u32 tximr; /* PSC + 0x90 */ + u32 txcnt; /* PSC + 0x94 */ + u32 txptr; /* PSC + 0x98 */ + u32 txsz; /* PSC + 0x9c */ + u32 reserved2[7]; + union { + u8 txdata_8; + u16 txdata_16; + u32 txdata_32; + } txdata; /* PSC + 0xbc */ +#define txdata_8 txdata.txdata_8 +#define txdata_16 txdata.txdata_16 +#define txdata_32 txdata.txdata_32 + u32 rxcmd; /* PSC + 0xc0 */ + u32 rxalarm; /* PSC + 0xc4 */ + u32 rxsr; /* PSC + 0xc8 */ + u32 rxisr; /* PSC + 0xcc */ + u32 rximr; /* PSC + 0xd0 */ + u32 rxcnt; /* PSC + 0xd4 */ + u32 rxptr; /* PSC + 0xd8 */ + u32 rxsz; /* PSC + 0xdc */ + u32 reserved3[7]; + union { + u8 rxdata_8; + u16 rxdata_16; + u32 rxdata_32; + } rxdata; /* PSC + 0xfc */ +#define rxdata_8 rxdata.rxdata_8 +#define rxdata_16 rxdata.rxdata_16 +#define rxdata_32 rxdata.rxdata_32 +}; + +struct mpc5125_psc { + u8 mr1; /* PSC + 0x00 */ + u8 reserved0[3]; + u8 mr2; /* PSC + 0x04 */ + u8 reserved1[3]; + struct { + u16 status; /* PSC + 0x08 */ + u8 reserved2[2]; + u8 clock_select; /* PSC + 0x0c */ + u8 reserved3[3]; + } sr_csr; + u8 command; /* PSC + 0x10 */ + u8 reserved4[3]; + union { /* PSC + 0x14 */ + u8 buffer_8; + u16 buffer_16; + u32 buffer_32; + } buffer; + struct { + u8 ipcr; /* PSC + 0x18 */ + u8 reserved5[3]; + u8 acr; /* PSC + 0x1c */ + u8 reserved6[3]; + } ipcr_acr; + struct { + u16 isr; /* PSC + 0x20 */ + u8 reserved7[2]; + u16 imr; /* PSC + 0x24 */ + u8 reserved8[2]; + } isr_imr; + u8 ctur; /* PSC + 0x28 */ + u8 reserved9[3]; + u8 ctlr; /* PSC + 0x2c */ + u8 reserved10[3]; + u32 ccr; /* PSC + 0x30 */ + u32 ac97slots; /* PSC + 0x34 */ + u32 ac97cmd; /* PSC + 0x38 */ + u32 ac97data; /* PSC + 0x3c */ + u8 reserved11[4]; + u8 ip; /* PSC + 0x44 */ + u8 reserved12[3]; + u8 op1; /* PSC + 0x48 */ + u8 reserved13[3]; + u8 op0; /* PSC + 0x4c */ + u8 reserved14[3]; + u32 sicr; /* PSC + 0x50 */ + u8 reserved15[4]; /* make eq. sizeof(mpc52xx_psc) */ +}; + +#endif /* __ASM_MPC52xx_PSC_H__ */ diff --git a/arch/powerpc/include/asm/mpc5xxx.h b/arch/powerpc/include/asm/mpc5xxx.h new file mode 100644 index 000000000..2f60f5c54 --- /dev/null +++ b/arch/powerpc/include/asm/mpc5xxx.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. + * + * Author: John Rigby, <jrigby@freescale.com>, Friday Apr 13 2007 + * + * Description: + * MPC5xxx Prototypes and definitions + */ + +#ifndef __ASM_POWERPC_MPC5xxx_H__ +#define __ASM_POWERPC_MPC5xxx_H__ + +extern unsigned long mpc5xxx_get_bus_frequency(struct device_node *node); + +#endif /* __ASM_POWERPC_MPC5xxx_H__ */ + diff --git a/arch/powerpc/include/asm/mpc6xx.h b/arch/powerpc/include/asm/mpc6xx.h new file mode 100644 index 000000000..6ed9f4ccc --- /dev/null +++ b/arch/powerpc/include/asm/mpc6xx.h @@ -0,0 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_POWERPC_MPC6xx_H +#define __ASM_POWERPC_MPC6xx_H + +void mpc6xx_enter_standby(void); + +#endif diff --git a/arch/powerpc/include/asm/mpc8260.h b/arch/powerpc/include/asm/mpc8260.h new file mode 100644 index 000000000..fd8c57074 --- /dev/null +++ b/arch/powerpc/include/asm/mpc8260.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Since there are many different boards and no standard configuration, + * we have a unique include file for each. Rather than change every + * file that has to include MPC8260 configuration, they all include + * this one and the configuration switching is done here. + */ +#ifdef __KERNEL__ +#ifndef __ASM_POWERPC_MPC8260_H__ +#define __ASM_POWERPC_MPC8260_H__ + +#define MPC82XX_BCR_PLDP 0x00800000 /* Pipeline Maximum Depth */ + +#ifdef CONFIG_8260 + +#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS) +#include <platforms/82xx/pq2ads.h> +#endif + +#ifdef CONFIG_PCI_8260 +#include <platforms/82xx/m82xx_pci.h> +#endif + +#endif /* CONFIG_8260 */ +#endif /* !__ASM_POWERPC_MPC8260_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/mpc85xx.h b/arch/powerpc/include/asm/mpc85xx.h new file mode 100644 index 000000000..21aabc323 --- /dev/null +++ b/arch/powerpc/include/asm/mpc85xx.h @@ -0,0 +1,91 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * MPC85xx cpu type detection + * + * Copyright 2011-2012 Freescale Semiconductor, Inc. + */ + +#ifndef __ASM_PPC_MPC85XX_H +#define __ASM_PPC_MPC85XX_H + +#define SVR_REV(svr) ((svr) & 0xFF) /* SOC design resision */ +#define SVR_MAJ(svr) (((svr) >> 4) & 0xF) /* Major revision field*/ +#define SVR_MIN(svr) (((svr) >> 0) & 0xF) /* Minor revision field*/ + +/* Some parts define SVR[0:23] as the SOC version */ +#define SVR_SOC_VER(svr) (((svr) >> 8) & 0xFFF7FF) /* SOC Version fields */ + +#define SVR_8533 0x803400 +#define SVR_8535 0x803701 +#define SVR_8536 0x803700 +#define SVR_8540 0x803000 +#define SVR_8541 0x807200 +#define SVR_8543 0x803200 +#define SVR_8544 0x803401 +#define SVR_8545 0x803102 +#define SVR_8547 0x803101 +#define SVR_8548 0x803100 +#define SVR_8555 0x807100 +#define SVR_8560 0x807000 +#define SVR_8567 0x807501 +#define SVR_8568 0x807500 +#define SVR_8569 0x808000 +#define SVR_8572 0x80E000 +#define SVR_P1010 0x80F100 +#define SVR_P1011 0x80E500 +#define SVR_P1012 0x80E501 +#define SVR_P1013 0x80E700 +#define SVR_P1014 0x80F101 +#define SVR_P1017 0x80F700 +#define SVR_P1020 0x80E400 +#define SVR_P1021 0x80E401 +#define SVR_P1022 0x80E600 +#define SVR_P1023 0x80F600 +#define SVR_P1024 0x80E402 +#define SVR_P1025 0x80E403 +#define SVR_P2010 0x80E300 +#define SVR_P2020 0x80E200 +#define SVR_P2040 0x821000 +#define SVR_P2041 0x821001 +#define SVR_P3041 0x821103 +#define SVR_P4040 0x820100 +#define SVR_P4080 0x820000 +#define SVR_P5010 0x822100 +#define SVR_P5020 0x822000 +#define SVR_P5021 0X820500 +#define SVR_P5040 0x820400 +#define SVR_T4240 0x824000 +#define SVR_T4120 0x824001 +#define SVR_T4160 0x824100 +#define SVR_T4080 0x824102 +#define SVR_C291 0x850000 +#define SVR_C292 0x850020 +#define SVR_C293 0x850030 +#define SVR_B4860 0X868000 +#define SVR_G4860 0x868001 +#define SVR_G4060 0x868003 +#define SVR_B4440 0x868100 +#define SVR_G4440 0x868101 +#define SVR_B4420 0x868102 +#define SVR_B4220 0x868103 +#define SVR_T1040 0x852000 +#define SVR_T1041 0x852001 +#define SVR_T1042 0x852002 +#define SVR_T1020 0x852100 +#define SVR_T1021 0x852101 +#define SVR_T1022 0x852102 +#define SVR_T2080 0x853000 +#define SVR_T2081 0x853100 + +#define SVR_8610 0x80A000 +#define SVR_8641 0x809000 +#define SVR_8641D 0x809001 + +#define SVR_9130 0x860001 +#define SVR_9131 0x860000 +#define SVR_9132 0x861000 +#define SVR_9232 0x861400 + +#define SVR_Unknown 0xFFFFFF + +#endif diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h new file mode 100644 index 000000000..0abf2e7fd --- /dev/null +++ b/arch/powerpc/include/asm/mpic.h @@ -0,0 +1,497 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_MPIC_H +#define _ASM_POWERPC_MPIC_H +#ifdef __KERNEL__ + +#include <linux/irq.h> +#include <asm/dcr.h> +#include <asm/msi_bitmap.h> + +/* + * Global registers + */ + +#define MPIC_GREG_BASE 0x01000 + +#define MPIC_GREG_FEATURE_0 0x00000 +#define MPIC_GREG_FEATURE_LAST_SRC_MASK 0x07ff0000 +#define MPIC_GREG_FEATURE_LAST_SRC_SHIFT 16 +#define MPIC_GREG_FEATURE_LAST_CPU_MASK 0x00001f00 +#define MPIC_GREG_FEATURE_LAST_CPU_SHIFT 8 +#define MPIC_GREG_FEATURE_VERSION_MASK 0xff +#define MPIC_GREG_FEATURE_1 0x00010 +#define MPIC_GREG_GLOBAL_CONF_0 0x00020 +#define MPIC_GREG_GCONF_RESET 0x80000000 +/* On the FSL mpic implementations the Mode field is expand to be + * 2 bits wide: + * 0b00 = pass through (interrupts routed to IRQ0) + * 0b01 = Mixed mode + * 0b10 = reserved + * 0b11 = External proxy / coreint + */ +#define MPIC_GREG_GCONF_COREINT 0x60000000 +#define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000 +#define MPIC_GREG_GCONF_NO_BIAS 0x10000000 +#define MPIC_GREG_GCONF_BASE_MASK 0x000fffff +#define MPIC_GREG_GCONF_MCK 0x08000000 +#define MPIC_GREG_GLOBAL_CONF_1 0x00030 +#define MPIC_GREG_VENDOR_0 0x00040 +#define MPIC_GREG_VENDOR_1 0x00050 +#define MPIC_GREG_VENDOR_2 0x00060 +#define MPIC_GREG_VENDOR_3 0x00070 +#define MPIC_GREG_VENDOR_ID 0x00080 +#define MPIC_GREG_VENDOR_ID_STEPPING_MASK 0x00ff0000 +#define MPIC_GREG_VENDOR_ID_STEPPING_SHIFT 16 +#define MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK 0x0000ff00 +#define MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT 8 +#define MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK 0x000000ff +#define MPIC_GREG_PROCESSOR_INIT 0x00090 +#define MPIC_GREG_IPI_VECTOR_PRI_0 0x000a0 +#define MPIC_GREG_IPI_VECTOR_PRI_1 0x000b0 +#define MPIC_GREG_IPI_VECTOR_PRI_2 0x000c0 +#define MPIC_GREG_IPI_VECTOR_PRI_3 0x000d0 +#define MPIC_GREG_IPI_STRIDE 0x10 +#define MPIC_GREG_SPURIOUS 0x000e0 +#define MPIC_GREG_TIMER_FREQ 0x000f0 + +/* + * + * Timer registers + */ +#define MPIC_TIMER_BASE 0x01100 +#define MPIC_TIMER_STRIDE 0x40 +#define MPIC_TIMER_GROUP_STRIDE 0x1000 + +#define MPIC_TIMER_CURRENT_CNT 0x00000 +#define MPIC_TIMER_BASE_CNT 0x00010 +#define MPIC_TIMER_VECTOR_PRI 0x00020 +#define MPIC_TIMER_DESTINATION 0x00030 + +/* + * Per-Processor registers + */ + +#define MPIC_CPU_THISBASE 0x00000 +#define MPIC_CPU_BASE 0x20000 +#define MPIC_CPU_STRIDE 0x01000 + +#define MPIC_CPU_IPI_DISPATCH_0 0x00040 +#define MPIC_CPU_IPI_DISPATCH_1 0x00050 +#define MPIC_CPU_IPI_DISPATCH_2 0x00060 +#define MPIC_CPU_IPI_DISPATCH_3 0x00070 +#define MPIC_CPU_IPI_DISPATCH_STRIDE 0x00010 +#define MPIC_CPU_CURRENT_TASK_PRI 0x00080 +#define MPIC_CPU_TASKPRI_MASK 0x0000000f +#define MPIC_CPU_WHOAMI 0x00090 +#define MPIC_CPU_WHOAMI_MASK 0x0000001f +#define MPIC_CPU_INTACK 0x000a0 +#define MPIC_CPU_EOI 0x000b0 +#define MPIC_CPU_MCACK 0x000c0 + +/* + * Per-source registers + */ + +#define MPIC_IRQ_BASE 0x10000 +#define MPIC_IRQ_STRIDE 0x00020 +#define MPIC_IRQ_VECTOR_PRI 0x00000 +#define MPIC_VECPRI_MASK 0x80000000 +#define MPIC_VECPRI_ACTIVITY 0x40000000 /* Read Only */ +#define MPIC_VECPRI_PRIORITY_MASK 0x000f0000 +#define MPIC_VECPRI_PRIORITY_SHIFT 16 +#define MPIC_VECPRI_VECTOR_MASK 0x000007ff +#define MPIC_VECPRI_POLARITY_POSITIVE 0x00800000 +#define MPIC_VECPRI_POLARITY_NEGATIVE 0x00000000 +#define MPIC_VECPRI_POLARITY_MASK 0x00800000 +#define MPIC_VECPRI_SENSE_LEVEL 0x00400000 +#define MPIC_VECPRI_SENSE_EDGE 0x00000000 +#define MPIC_VECPRI_SENSE_MASK 0x00400000 +#define MPIC_IRQ_DESTINATION 0x00010 + +#define MPIC_FSL_BRR1 0x00000 +#define MPIC_FSL_BRR1_VER 0x0000ffff + +#define MPIC_MAX_IRQ_SOURCES 2048 +#define MPIC_MAX_CPUS 32 +#define MPIC_MAX_ISU 32 + +#define MPIC_MAX_ERR 32 +#define MPIC_FSL_ERR_INT 16 + +/* + * Tsi108 implementation of MPIC has many differences from the original one + */ + +/* + * Global registers + */ + +#define TSI108_GREG_BASE 0x00000 +#define TSI108_GREG_FEATURE_0 0x00000 +#define TSI108_GREG_GLOBAL_CONF_0 0x00004 +#define TSI108_GREG_VENDOR_ID 0x0000c +#define TSI108_GREG_IPI_VECTOR_PRI_0 0x00204 /* Doorbell 0 */ +#define TSI108_GREG_IPI_STRIDE 0x0c +#define TSI108_GREG_SPURIOUS 0x00010 +#define TSI108_GREG_TIMER_FREQ 0x00014 + +/* + * Timer registers + */ +#define TSI108_TIMER_BASE 0x0030 +#define TSI108_TIMER_STRIDE 0x10 +#define TSI108_TIMER_CURRENT_CNT 0x00000 +#define TSI108_TIMER_BASE_CNT 0x00004 +#define TSI108_TIMER_VECTOR_PRI 0x00008 +#define TSI108_TIMER_DESTINATION 0x0000c + +/* + * Per-Processor registers + */ +#define TSI108_CPU_BASE 0x00300 +#define TSI108_CPU_STRIDE 0x00040 +#define TSI108_CPU_IPI_DISPATCH_0 0x00200 +#define TSI108_CPU_IPI_DISPATCH_STRIDE 0x00000 +#define TSI108_CPU_CURRENT_TASK_PRI 0x00000 +#define TSI108_CPU_WHOAMI 0xffffffff +#define TSI108_CPU_INTACK 0x00004 +#define TSI108_CPU_EOI 0x00008 +#define TSI108_CPU_MCACK 0x00004 /* Doesn't really exist here */ + +/* + * Per-source registers + */ +#define TSI108_IRQ_BASE 0x00100 +#define TSI108_IRQ_STRIDE 0x00008 +#define TSI108_IRQ_VECTOR_PRI 0x00000 +#define TSI108_VECPRI_VECTOR_MASK 0x000000ff +#define TSI108_VECPRI_POLARITY_POSITIVE 0x01000000 +#define TSI108_VECPRI_POLARITY_NEGATIVE 0x00000000 +#define TSI108_VECPRI_SENSE_LEVEL 0x02000000 +#define TSI108_VECPRI_SENSE_EDGE 0x00000000 +#define TSI108_VECPRI_POLARITY_MASK 0x01000000 +#define TSI108_VECPRI_SENSE_MASK 0x02000000 +#define TSI108_IRQ_DESTINATION 0x00004 + +/* weird mpic register indices and mask bits in the HW info array */ +enum { + MPIC_IDX_GREG_BASE = 0, + MPIC_IDX_GREG_FEATURE_0, + MPIC_IDX_GREG_GLOBAL_CONF_0, + MPIC_IDX_GREG_VENDOR_ID, + MPIC_IDX_GREG_IPI_VECTOR_PRI_0, + MPIC_IDX_GREG_IPI_STRIDE, + MPIC_IDX_GREG_SPURIOUS, + MPIC_IDX_GREG_TIMER_FREQ, + + MPIC_IDX_TIMER_BASE, + MPIC_IDX_TIMER_STRIDE, + MPIC_IDX_TIMER_CURRENT_CNT, + MPIC_IDX_TIMER_BASE_CNT, + MPIC_IDX_TIMER_VECTOR_PRI, + MPIC_IDX_TIMER_DESTINATION, + + MPIC_IDX_CPU_BASE, + MPIC_IDX_CPU_STRIDE, + MPIC_IDX_CPU_IPI_DISPATCH_0, + MPIC_IDX_CPU_IPI_DISPATCH_STRIDE, + MPIC_IDX_CPU_CURRENT_TASK_PRI, + MPIC_IDX_CPU_WHOAMI, + MPIC_IDX_CPU_INTACK, + MPIC_IDX_CPU_EOI, + MPIC_IDX_CPU_MCACK, + + MPIC_IDX_IRQ_BASE, + MPIC_IDX_IRQ_STRIDE, + MPIC_IDX_IRQ_VECTOR_PRI, + + MPIC_IDX_VECPRI_VECTOR_MASK, + MPIC_IDX_VECPRI_POLARITY_POSITIVE, + MPIC_IDX_VECPRI_POLARITY_NEGATIVE, + MPIC_IDX_VECPRI_SENSE_LEVEL, + MPIC_IDX_VECPRI_SENSE_EDGE, + MPIC_IDX_VECPRI_POLARITY_MASK, + MPIC_IDX_VECPRI_SENSE_MASK, + MPIC_IDX_IRQ_DESTINATION, + MPIC_IDX_END +}; + + +#ifdef CONFIG_MPIC_U3_HT_IRQS +/* Fixup table entry */ +struct mpic_irq_fixup +{ + u8 __iomem *base; + u8 __iomem *applebase; + u32 data; + unsigned int index; +}; +#endif /* CONFIG_MPIC_U3_HT_IRQS */ + + +enum mpic_reg_type { + mpic_access_mmio_le, + mpic_access_mmio_be, +#ifdef CONFIG_PPC_DCR + mpic_access_dcr +#endif +}; + +struct mpic_reg_bank { + u32 __iomem *base; +#ifdef CONFIG_PPC_DCR + dcr_host_t dhost; +#endif /* CONFIG_PPC_DCR */ +}; + +struct mpic_irq_save { + u32 vecprio, + dest; +#ifdef CONFIG_MPIC_U3_HT_IRQS + u32 fixup_data; +#endif +}; + +/* The instance data of a given MPIC */ +struct mpic +{ + /* The OpenFirmware dt node for this MPIC */ + struct device_node *node; + + /* The remapper for this MPIC */ + struct irq_domain *irqhost; + + /* The "linux" controller struct */ + struct irq_chip hc_irq; +#ifdef CONFIG_MPIC_U3_HT_IRQS + struct irq_chip hc_ht_irq; +#endif +#ifdef CONFIG_SMP + struct irq_chip hc_ipi; +#endif + struct irq_chip hc_tm; + struct irq_chip hc_err; + const char *name; + /* Flags */ + unsigned int flags; + /* How many irq sources in a given ISU */ + unsigned int isu_size; + unsigned int isu_shift; + unsigned int isu_mask; + /* Number of sources */ + unsigned int num_sources; + + /* vector numbers used for internal sources (ipi/timers) */ + unsigned int ipi_vecs[4]; + unsigned int timer_vecs[8]; + /* vector numbers used for FSL MPIC error interrupts */ + unsigned int err_int_vecs[MPIC_MAX_ERR]; + + /* Spurious vector to program into unused sources */ + unsigned int spurious_vec; + +#ifdef CONFIG_MPIC_U3_HT_IRQS + /* The fixup table */ + struct mpic_irq_fixup *fixups; + raw_spinlock_t fixup_lock; +#endif + + /* Register access method */ + enum mpic_reg_type reg_type; + + /* The physical base address of the MPIC */ + phys_addr_t paddr; + + /* The various ioremap'ed bases */ + struct mpic_reg_bank thiscpuregs; + struct mpic_reg_bank gregs; + struct mpic_reg_bank tmregs; + struct mpic_reg_bank cpuregs[MPIC_MAX_CPUS]; + struct mpic_reg_bank isus[MPIC_MAX_ISU]; + + /* ioremap'ed base for error interrupt registers */ + u32 __iomem *err_regs; + + /* Protected sources */ + unsigned long *protected; + +#ifdef CONFIG_MPIC_WEIRD + /* Pointer to HW info array */ + u32 *hw_set; +#endif + +#ifdef CONFIG_PCI_MSI + struct msi_bitmap msi_bitmap; +#endif + +#ifdef CONFIG_MPIC_BROKEN_REGREAD + u32 isu_reg0_shadow[MPIC_MAX_IRQ_SOURCES]; +#endif + + /* link */ + struct mpic *next; + +#ifdef CONFIG_PM + struct mpic_irq_save *save_data; +#endif +}; + +extern struct bus_type mpic_subsys; + +/* + * MPIC flags (passed to mpic_alloc) + * + * The top 4 bits contain an MPIC bhw id that is used to index the + * register offsets and some masks when CONFIG_MPIC_WEIRD is set. + * Note setting any ID (leaving those bits to 0) means standard MPIC + */ + +/* + * This is a secondary ("chained") controller; it only uses the CPU0 + * registers. Primary controllers have IPIs and affinity control. + */ +#define MPIC_SECONDARY 0x00000001 + +/* Set this for a big-endian MPIC */ +#define MPIC_BIG_ENDIAN 0x00000002 +/* Broken U3 MPIC */ +#define MPIC_U3_HT_IRQS 0x00000004 +/* Broken IPI registers (autodetected) */ +#define MPIC_BROKEN_IPI 0x00000008 +/* Spurious vector requires EOI */ +#define MPIC_SPV_EOI 0x00000020 +/* No passthrough disable */ +#define MPIC_NO_PTHROU_DIS 0x00000040 +/* DCR based MPIC */ +#define MPIC_USES_DCR 0x00000080 +/* MPIC has 11-bit vector fields (or larger) */ +#define MPIC_LARGE_VECTORS 0x00000100 +/* Enable delivery of prio 15 interrupts as MCK instead of EE */ +#define MPIC_ENABLE_MCK 0x00000200 +/* Disable bias among target selection, spread interrupts evenly */ +#define MPIC_NO_BIAS 0x00000400 +/* Destination only supports a single CPU at a time */ +#define MPIC_SINGLE_DEST_CPU 0x00001000 +/* Enable CoreInt delivery of interrupts */ +#define MPIC_ENABLE_COREINT 0x00002000 +/* Do not reset the MPIC during initialization */ +#define MPIC_NO_RESET 0x00004000 +/* Freescale MPIC (compatible includes "fsl,mpic") */ +#define MPIC_FSL 0x00008000 +/* Freescale MPIC supports EIMR (error interrupt mask register). + * This flag is set for MPIC version >= 4.1 (version determined + * from the BRR1 register). +*/ +#define MPIC_FSL_HAS_EIMR 0x00010000 + +/* MPIC HW modification ID */ +#define MPIC_REGSET_MASK 0xf0000000 +#define MPIC_REGSET(val) (((val) & 0xf ) << 28) +#define MPIC_GET_REGSET(flags) (((flags) >> 28) & 0xf) + +#define MPIC_REGSET_STANDARD MPIC_REGSET(0) /* Original MPIC */ +#define MPIC_REGSET_TSI108 MPIC_REGSET(1) /* Tsi108/109 PIC */ + +/* Get the version of primary MPIC */ +#ifdef CONFIG_MPIC +extern u32 fsl_mpic_primary_get_version(void); +#else +static inline u32 fsl_mpic_primary_get_version(void) +{ + return 0; +} +#endif + +/* Allocate the controller structure and setup the linux irq descs + * for the range if interrupts passed in. No HW initialization is + * actually performed. + * + * @phys_addr: physial base address of the MPIC + * @flags: flags, see constants above + * @isu_size: number of interrupts in an ISU. Use 0 to use a + * standard ISU-less setup (aka powermac) + * @irq_offset: first irq number to assign to this mpic + * @irq_count: number of irqs to use with this mpic IRQ sources. Pass 0 + * to match the number of sources + * @ipi_offset: first irq number to assign to this mpic IPI sources, + * used only on primary mpic + * @senses: array of sense values + * @senses_num: number of entries in the array + * + * Note about the sense array. If none is passed, all interrupts are + * setup to be level negative unless MPIC_U3_HT_IRQS is set in which + * case they are edge positive (and the array is ignored anyway). + * The values in the array start at the first source of the MPIC, + * that is senses[0] correspond to linux irq "irq_offset". + */ +extern struct mpic *mpic_alloc(struct device_node *node, + phys_addr_t phys_addr, + unsigned int flags, + unsigned int isu_size, + unsigned int irq_count, + const char *name); + +/* Assign ISUs, to call before mpic_init() + * + * @mpic: controller structure as returned by mpic_alloc() + * @isu_num: ISU number + * @phys_addr: physical address of the ISU + */ +extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, + phys_addr_t phys_addr); + + +/* Initialize the controller. After this has been called, none of the above + * should be called again for this mpic + */ +extern void mpic_init(struct mpic *mpic); + +/* + * All of the following functions must only be used after the + * ISUs have been assigned and the controller fully initialized + * with mpic_init() + */ + + +/* Change the priority of an interrupt. Default is 8 for irqs and + * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the + * IPI number is then the offset'ed (linux irq number mapped to the IPI) + */ +extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri); + +/* Setup a non-boot CPU */ +extern void mpic_setup_this_cpu(void); + +/* Clean up for kexec (or cpu offline or ...) */ +extern void mpic_teardown_this_cpu(int secondary); + +/* Get the current cpu priority for this cpu (0..15) */ +extern int mpic_cpu_get_priority(void); + +/* Set the current cpu priority for this cpu */ +extern void mpic_cpu_set_priority(int prio); + +/* Request IPIs on primary mpic */ +extern void mpic_request_ipis(void); + +/* Send a message (IPI) to a given target (cpu number or MSG_*) */ +void smp_mpic_message_pass(int target, int msg); + +/* Unmask a specific virq */ +extern void mpic_unmask_irq(struct irq_data *d); +/* Mask a specific virq */ +extern void mpic_mask_irq(struct irq_data *d); +/* EOI a specific virq */ +extern void mpic_end_irq(struct irq_data *d); + +/* Fetch interrupt from a given mpic */ +extern unsigned int mpic_get_one_irq(struct mpic *mpic); +/* This one gets from the primary mpic */ +extern unsigned int mpic_get_irq(void); +/* This one gets from the primary mpic via CoreInt*/ +extern unsigned int mpic_get_coreint_irq(void); +/* Fetch Machine Check interrupt from primary mpic */ +extern unsigned int mpic_get_mcirq(void); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_MPIC_H */ diff --git a/arch/powerpc/include/asm/mpic_msgr.h b/arch/powerpc/include/asm/mpic_msgr.h new file mode 100644 index 000000000..cd25eeced --- /dev/null +++ b/arch/powerpc/include/asm/mpic_msgr.h @@ -0,0 +1,129 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright 2011-2012, Meador Inge, Mentor Graphics Corporation. + */ + +#ifndef _ASM_MPIC_MSGR_H +#define _ASM_MPIC_MSGR_H + +#include <linux/types.h> +#include <linux/spinlock.h> +#include <asm/smp.h> +#include <asm/io.h> + +struct mpic_msgr { + u32 __iomem *base; + u32 __iomem *mer; + int irq; + unsigned char in_use; + raw_spinlock_t lock; + int num; +}; + +/* Get a message register + * + * @reg_num: the MPIC message register to get + * + * A pointer to the message register is returned. If + * the message register asked for is already in use, then + * EBUSY is returned. If the number given is not associated + * with an actual message register, then ENODEV is returned. + * Successfully getting the register marks it as in use. + */ +extern struct mpic_msgr *mpic_msgr_get(unsigned int reg_num); + +/* Relinquish a message register + * + * @msgr: the message register to return + * + * Disables the given message register and marks it as free. + * After this call has completed successully the message + * register is available to be acquired by a call to + * mpic_msgr_get. + */ +extern void mpic_msgr_put(struct mpic_msgr *msgr); + +/* Enable a message register + * + * @msgr: the message register to enable + * + * The given message register is enabled for sending + * messages. + */ +extern void mpic_msgr_enable(struct mpic_msgr *msgr); + +/* Disable a message register + * + * @msgr: the message register to disable + * + * The given message register is disabled for sending + * messages. + */ +extern void mpic_msgr_disable(struct mpic_msgr *msgr); + +/* Write a message to a message register + * + * @msgr: the message register to write to + * @message: the message to write + * + * The given 32-bit message is written to the given message + * register. Writing to an enabled message registers fires + * an interrupt. + */ +static inline void mpic_msgr_write(struct mpic_msgr *msgr, u32 message) +{ + out_be32(msgr->base, message); +} + +/* Read a message from a message register + * + * @msgr: the message register to read from + * + * Returns the 32-bit value currently in the given message register. + * Upon reading the register any interrupts for that register are + * cleared. + */ +static inline u32 mpic_msgr_read(struct mpic_msgr *msgr) +{ + return in_be32(msgr->base); +} + +/* Clear a message register + * + * @msgr: the message register to clear + * + * Clears any interrupts associated with the given message register. + */ +static inline void mpic_msgr_clear(struct mpic_msgr *msgr) +{ + (void) mpic_msgr_read(msgr); +} + +/* Set the destination CPU for the message register + * + * @msgr: the message register whose destination is to be set + * @cpu_num: the Linux CPU number to bind the message register to + * + * Note that the CPU number given is the CPU number used by the kernel + * and *not* the actual hardware CPU number. + */ +static inline void mpic_msgr_set_destination(struct mpic_msgr *msgr, + u32 cpu_num) +{ + out_be32(msgr->base, 1 << get_hard_smp_processor_id(cpu_num)); +} + +/* Get the IRQ number for the message register + * @msgr: the message register whose IRQ is to be returned + * + * Returns the IRQ number associated with the given message register. + * 0 is returned if this message register is not capable of receiving + * interrupts. What message register can and cannot receive interrupts is + * specified in the device tree for the system. + */ +static inline int mpic_msgr_get_irq(struct mpic_msgr *msgr) +{ + return msgr->irq; +} + +#endif diff --git a/arch/powerpc/include/asm/mpic_timer.h b/arch/powerpc/include/asm/mpic_timer.h new file mode 100644 index 000000000..d33e4149b --- /dev/null +++ b/arch/powerpc/include/asm/mpic_timer.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * arch/powerpc/include/asm/mpic_timer.h + * + * Header file for Mpic Global Timer + * + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Wang Dongsheng <Dongsheng.Wang@freescale.com> + * Li Yang <leoli@freescale.com> + */ + +#ifndef __MPIC_TIMER__ +#define __MPIC_TIMER__ + +#include <linux/interrupt.h> +#include <linux/time.h> + +struct mpic_timer { + void *dev; + struct cascade_priv *cascade_handle; + unsigned int num; + unsigned int irq; +}; + +#ifdef CONFIG_MPIC_TIMER +struct mpic_timer *mpic_request_timer(irq_handler_t fn, void *dev, + time64_t time); +void mpic_start_timer(struct mpic_timer *handle); +void mpic_stop_timer(struct mpic_timer *handle); +void mpic_get_remain_time(struct mpic_timer *handle, time64_t *time); +void mpic_free_timer(struct mpic_timer *handle); +#else +struct mpic_timer *mpic_request_timer(irq_handler_t fn, void *dev, + time64_t time) { return NULL; } +void mpic_start_timer(struct mpic_timer *handle) { } +void mpic_stop_timer(struct mpic_timer *handle) { } +void mpic_get_remain_time(struct mpic_timer *handle, time64_t *time) { } +void mpic_free_timer(struct mpic_timer *handle) { } +#endif + +#endif diff --git a/arch/powerpc/include/asm/msi_bitmap.h b/arch/powerpc/include/asm/msi_bitmap.h new file mode 100644 index 000000000..55c2f7db9 --- /dev/null +++ b/arch/powerpc/include/asm/msi_bitmap.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef _POWERPC_SYSDEV_MSI_BITMAP_H +#define _POWERPC_SYSDEV_MSI_BITMAP_H + +/* + * Copyright 2008, Michael Ellerman, IBM Corporation. + */ + +#include <linux/of.h> +#include <asm/irq.h> + +struct msi_bitmap { + struct device_node *of_node; + unsigned long *bitmap; + spinlock_t lock; + unsigned int irq_count; + bool bitmap_from_slab; +}; + +int msi_bitmap_alloc_hwirqs(struct msi_bitmap *bmp, int num); +void msi_bitmap_free_hwirqs(struct msi_bitmap *bmp, unsigned int offset, + unsigned int num); +void msi_bitmap_reserve_hwirq(struct msi_bitmap *bmp, unsigned int hwirq); + +int msi_bitmap_reserve_dt_hwirqs(struct msi_bitmap *bmp); + +int msi_bitmap_alloc(struct msi_bitmap *bmp, unsigned int irq_count, + struct device_node *of_node); +void msi_bitmap_free(struct msi_bitmap *bmp); + +#endif /* _POWERPC_SYSDEV_MSI_BITMAP_H */ diff --git a/arch/powerpc/include/asm/nmi.h b/arch/powerpc/include/asm/nmi.h new file mode 100644 index 000000000..84b4cfe73 --- /dev/null +++ b/arch/powerpc/include/asm/nmi.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_NMI_H +#define _ASM_NMI_H + +#ifdef CONFIG_PPC_WATCHDOG +extern void arch_touch_nmi_watchdog(void); +#else +static inline void arch_touch_nmi_watchdog(void) {} +#endif + +#if defined(CONFIG_NMI_IPI) && defined(CONFIG_STACKTRACE) +extern void arch_trigger_cpumask_backtrace(const cpumask_t *mask, + bool exclude_self); +#define arch_trigger_cpumask_backtrace arch_trigger_cpumask_backtrace +#endif + +extern void hv_nmi_check_nonrecoverable(struct pt_regs *regs); + +#endif /* _ASM_NMI_H */ diff --git a/arch/powerpc/include/asm/nohash/32/hugetlb-8xx.h b/arch/powerpc/include/asm/nohash/32/hugetlb-8xx.h new file mode 100644 index 000000000..39be9aea8 --- /dev/null +++ b/arch/powerpc/include/asm/nohash/32/hugetlb-8xx.h @@ -0,0 +1,82 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_NOHASH_32_HUGETLB_8XX_H +#define _ASM_POWERPC_NOHASH_32_HUGETLB_8XX_H + +#define PAGE_SHIFT_8M 23 + +static inline pte_t *hugepd_page(hugepd_t hpd) +{ + BUG_ON(!hugepd_ok(hpd)); + + return (pte_t *)__va(hpd_val(hpd) & ~HUGEPD_SHIFT_MASK); +} + +static inline unsigned int hugepd_shift(hugepd_t hpd) +{ + return PAGE_SHIFT_8M; +} + +static inline pte_t *hugepte_offset(hugepd_t hpd, unsigned long addr, + unsigned int pdshift) +{ + unsigned long idx = (addr & (SZ_4M - 1)) >> PAGE_SHIFT; + + return hugepd_page(hpd) + idx; +} + +static inline void flush_hugetlb_page(struct vm_area_struct *vma, + unsigned long vmaddr) +{ + flush_tlb_page(vma, vmaddr); +} + +static inline void hugepd_populate(hugepd_t *hpdp, pte_t *new, unsigned int pshift) +{ + *hpdp = __hugepd(__pa(new) | _PMD_USER | _PMD_PRESENT | _PMD_PAGE_8M); +} + +static inline void hugepd_populate_kernel(hugepd_t *hpdp, pte_t *new, unsigned int pshift) +{ + *hpdp = __hugepd(__pa(new) | _PMD_PRESENT | _PMD_PAGE_8M); +} + +static inline int check_and_get_huge_psize(int shift) +{ + return shift_to_mmu_psize(shift); +} + +#define __HAVE_ARCH_HUGE_SET_HUGE_PTE_AT +void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte); + +#define __HAVE_ARCH_HUGE_PTE_CLEAR +static inline void huge_pte_clear(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, unsigned long sz) +{ + pte_update(mm, addr, ptep, ~0UL, 0, 1); +} + +#define __HAVE_ARCH_HUGE_PTEP_SET_WRPROTECT +static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + unsigned long clr = ~pte_val(pte_wrprotect(__pte(~0))); + unsigned long set = pte_val(pte_wrprotect(__pte(0))); + + pte_update(mm, addr, ptep, clr, set, 1); +} + +#ifdef CONFIG_PPC_4K_PAGES +static inline pte_t arch_make_huge_pte(pte_t entry, struct vm_area_struct *vma, + struct page *page, int writable) +{ + size_t size = huge_page_size(hstate_vma(vma)); + + if (size == SZ_16K) + return __pte(pte_val(entry) & ~_PAGE_HUGE); + else + return entry; +} +#define arch_make_huge_pte arch_make_huge_pte +#endif + +#endif /* _ASM_POWERPC_NOHASH_32_HUGETLB_8XX_H */ diff --git a/arch/powerpc/include/asm/nohash/32/kup-8xx.h b/arch/powerpc/include/asm/nohash/32/kup-8xx.h new file mode 100644 index 000000000..567cdc557 --- /dev/null +++ b/arch/powerpc/include/asm/nohash/32/kup-8xx.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_KUP_8XX_H_ +#define _ASM_POWERPC_KUP_8XX_H_ + +#include <asm/bug.h> +#include <asm/mmu.h> + +#ifdef CONFIG_PPC_KUAP + +#ifdef __ASSEMBLY__ + +.macro kuap_save_and_lock sp, thread, gpr1, gpr2, gpr3 + lis \gpr2, MD_APG_KUAP@h /* only APG0 and APG1 are used */ + mfspr \gpr1, SPRN_MD_AP + mtspr SPRN_MD_AP, \gpr2 + stw \gpr1, STACK_REGS_KUAP(\sp) +.endm + +.macro kuap_restore sp, current, gpr1, gpr2, gpr3 + lwz \gpr1, STACK_REGS_KUAP(\sp) + mtspr SPRN_MD_AP, \gpr1 +.endm + +.macro kuap_check current, gpr +#ifdef CONFIG_PPC_KUAP_DEBUG + mfspr \gpr, SPRN_MD_AP + rlwinm \gpr, \gpr, 16, 0xffff +999: twnei \gpr, MD_APG_KUAP@h + EMIT_BUG_ENTRY 999b, __FILE__, __LINE__, (BUGFLAG_WARNING | BUGFLAG_ONCE) +#endif +.endm + +#else /* !__ASSEMBLY__ */ + +#include <asm/reg.h> + +static inline void allow_user_access(void __user *to, const void __user *from, + unsigned long size, unsigned long dir) +{ + mtspr(SPRN_MD_AP, MD_APG_INIT); +} + +static inline void prevent_user_access(void __user *to, const void __user *from, + unsigned long size, unsigned long dir) +{ + mtspr(SPRN_MD_AP, MD_APG_KUAP); +} + +static inline unsigned long prevent_user_access_return(void) +{ + unsigned long flags = mfspr(SPRN_MD_AP); + + mtspr(SPRN_MD_AP, MD_APG_KUAP); + + return flags; +} + +static inline void restore_user_access(unsigned long flags) +{ + mtspr(SPRN_MD_AP, flags); +} + +static inline bool +bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write) +{ + return WARN(!((regs->kuap ^ MD_APG_KUAP) & 0xff000000), + "Bug: fault blocked by AP register !"); +} + +#endif /* !__ASSEMBLY__ */ + +#endif /* CONFIG_PPC_KUAP */ + +#endif /* _ASM_POWERPC_KUP_8XX_H_ */ diff --git a/arch/powerpc/include/asm/nohash/32/mmu-40x.h b/arch/powerpc/include/asm/nohash/32/mmu-40x.h new file mode 100644 index 000000000..74f4edb59 --- /dev/null +++ b/arch/powerpc/include/asm/nohash/32/mmu-40x.h @@ -0,0 +1,68 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_MMU_40X_H_ +#define _ASM_POWERPC_MMU_40X_H_ + +/* + * PPC40x support + */ + +#define PPC40X_TLB_SIZE 64 + +/* + * TLB entries are defined by a "high" tag portion and a "low" data + * portion. On all architectures, the data portion is 32-bits. + * + * TLB entries are managed entirely under software control by reading, + * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx + * instructions. + */ + +#define TLB_LO 1 +#define TLB_HI 0 + +#define TLB_DATA TLB_LO +#define TLB_TAG TLB_HI + +/* Tag portion */ + +#define TLB_EPN_MASK 0xFFFFFC00 /* Effective Page Number */ +#define TLB_PAGESZ_MASK 0x00000380 +#define TLB_PAGESZ(x) (((x) & 0x7) << 7) +#define PAGESZ_1K 0 +#define PAGESZ_4K 1 +#define PAGESZ_16K 2 +#define PAGESZ_64K 3 +#define PAGESZ_256K 4 +#define PAGESZ_1M 5 +#define PAGESZ_4M 6 +#define PAGESZ_16M 7 +#define TLB_VALID 0x00000040 /* Entry is valid */ + +/* Data portion */ + +#define TLB_RPN_MASK 0xFFFFFC00 /* Real Page Number */ +#define TLB_PERM_MASK 0x00000300 +#define TLB_EX 0x00000200 /* Instruction execution allowed */ +#define TLB_WR 0x00000100 /* Writes permitted */ +#define TLB_ZSEL_MASK 0x000000F0 +#define TLB_ZSEL(x) (((x) & 0xF) << 4) +#define TLB_ATTR_MASK 0x0000000F +#define TLB_W 0x00000008 /* Caching is write-through */ +#define TLB_I 0x00000004 /* Caching is inhibited */ +#define TLB_M 0x00000002 /* Memory is coherent */ +#define TLB_G 0x00000001 /* Memory is guarded from prefetch */ + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned int id; + unsigned int active; + unsigned long vdso_base; +} mm_context_t; + +#endif /* !__ASSEMBLY__ */ + +#define mmu_virtual_psize MMU_PAGE_4K +#define mmu_linear_psize MMU_PAGE_256M + +#endif /* _ASM_POWERPC_MMU_40X_H_ */ diff --git a/arch/powerpc/include/asm/nohash/32/mmu-44x.h b/arch/powerpc/include/asm/nohash/32/mmu-44x.h new file mode 100644 index 000000000..28aa3b339 --- /dev/null +++ b/arch/powerpc/include/asm/nohash/32/mmu-44x.h @@ -0,0 +1,156 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_MMU_44X_H_ +#define _ASM_POWERPC_MMU_44X_H_ +/* + * PPC440 support + */ + +#include <asm/asm-const.h> + +#define PPC44x_MMUCR_TID 0x000000ff +#define PPC44x_MMUCR_STS 0x00010000 + +#define PPC44x_TLB_PAGEID 0 +#define PPC44x_TLB_XLAT 1 +#define PPC44x_TLB_ATTRIB 2 + +/* Page identification fields */ +#define PPC44x_TLB_EPN_MASK 0xfffffc00 /* Effective Page Number */ +#define PPC44x_TLB_VALID 0x00000200 /* Valid flag */ +#define PPC44x_TLB_TS 0x00000100 /* Translation address space */ +#define PPC44x_TLB_1K 0x00000000 /* Page sizes */ +#define PPC44x_TLB_4K 0x00000010 +#define PPC44x_TLB_16K 0x00000020 +#define PPC44x_TLB_64K 0x00000030 +#define PPC44x_TLB_256K 0x00000040 +#define PPC44x_TLB_1M 0x00000050 +#define PPC44x_TLB_16M 0x00000070 +#define PPC44x_TLB_256M 0x00000090 + +/* Translation fields */ +#define PPC44x_TLB_RPN_MASK 0xfffffc00 /* Real Page Number */ +#define PPC44x_TLB_ERPN_MASK 0x0000000f + +/* Storage attribute and access control fields */ +#define PPC44x_TLB_ATTR_MASK 0x0000ff80 +#define PPC44x_TLB_U0 0x00008000 /* User 0 */ +#define PPC44x_TLB_U1 0x00004000 /* User 1 */ +#define PPC44x_TLB_U2 0x00002000 /* User 2 */ +#define PPC44x_TLB_U3 0x00001000 /* User 3 */ +#define PPC44x_TLB_W 0x00000800 /* Caching is write-through */ +#define PPC44x_TLB_I 0x00000400 /* Caching is inhibited */ +#define PPC44x_TLB_M 0x00000200 /* Memory is coherent */ +#define PPC44x_TLB_G 0x00000100 /* Memory is guarded */ +#define PPC44x_TLB_E 0x00000080 /* Memory is little endian */ + +#define PPC44x_TLB_PERM_MASK 0x0000003f +#define PPC44x_TLB_UX 0x00000020 /* User execution */ +#define PPC44x_TLB_UW 0x00000010 /* User write */ +#define PPC44x_TLB_UR 0x00000008 /* User read */ +#define PPC44x_TLB_SX 0x00000004 /* Super execution */ +#define PPC44x_TLB_SW 0x00000002 /* Super write */ +#define PPC44x_TLB_SR 0x00000001 /* Super read */ + +/* Number of TLB entries */ +#define PPC44x_TLB_SIZE 64 + +/* 47x bits */ +#define PPC47x_MMUCR_TID 0x0000ffff +#define PPC47x_MMUCR_STS 0x00010000 + +/* Page identification fields */ +#define PPC47x_TLB0_EPN_MASK 0xfffff000 /* Effective Page Number */ +#define PPC47x_TLB0_VALID 0x00000800 /* Valid flag */ +#define PPC47x_TLB0_TS 0x00000400 /* Translation address space */ +#define PPC47x_TLB0_4K 0x00000000 +#define PPC47x_TLB0_16K 0x00000010 +#define PPC47x_TLB0_64K 0x00000030 +#define PPC47x_TLB0_1M 0x00000070 +#define PPC47x_TLB0_16M 0x000000f0 +#define PPC47x_TLB0_256M 0x000001f0 +#define PPC47x_TLB0_1G 0x000003f0 +#define PPC47x_TLB0_BOLTED_R 0x00000008 /* tlbre only */ + +/* Translation fields */ +#define PPC47x_TLB1_RPN_MASK 0xfffff000 /* Real Page Number */ +#define PPC47x_TLB1_ERPN_MASK 0x000003ff + +/* Storage attribute and access control fields */ +#define PPC47x_TLB2_ATTR_MASK 0x0003ff80 +#define PPC47x_TLB2_IL1I 0x00020000 /* Memory is guarded */ +#define PPC47x_TLB2_IL1D 0x00010000 /* Memory is guarded */ +#define PPC47x_TLB2_U0 0x00008000 /* User 0 */ +#define PPC47x_TLB2_U1 0x00004000 /* User 1 */ +#define PPC47x_TLB2_U2 0x00002000 /* User 2 */ +#define PPC47x_TLB2_U3 0x00001000 /* User 3 */ +#define PPC47x_TLB2_W 0x00000800 /* Caching is write-through */ +#define PPC47x_TLB2_I 0x00000400 /* Caching is inhibited */ +#define PPC47x_TLB2_M 0x00000200 /* Memory is coherent */ +#define PPC47x_TLB2_G 0x00000100 /* Memory is guarded */ +#define PPC47x_TLB2_E 0x00000080 /* Memory is little endian */ +#define PPC47x_TLB2_PERM_MASK 0x0000003f +#define PPC47x_TLB2_UX 0x00000020 /* User execution */ +#define PPC47x_TLB2_UW 0x00000010 /* User write */ +#define PPC47x_TLB2_UR 0x00000008 /* User read */ +#define PPC47x_TLB2_SX 0x00000004 /* Super execution */ +#define PPC47x_TLB2_SW 0x00000002 /* Super write */ +#define PPC47x_TLB2_SR 0x00000001 /* Super read */ +#define PPC47x_TLB2_U_RWX (PPC47x_TLB2_UX|PPC47x_TLB2_UW|PPC47x_TLB2_UR) +#define PPC47x_TLB2_S_RWX (PPC47x_TLB2_SX|PPC47x_TLB2_SW|PPC47x_TLB2_SR) +#define PPC47x_TLB2_S_RW (PPC47x_TLB2_SW | PPC47x_TLB2_SR) +#define PPC47x_TLB2_IMG (PPC47x_TLB2_I | PPC47x_TLB2_M | PPC47x_TLB2_G) + +#ifndef __ASSEMBLY__ + +extern unsigned int tlb_44x_hwater; +extern unsigned int tlb_44x_index; + +typedef struct { + unsigned int id; + unsigned int active; + unsigned long vdso_base; +} mm_context_t; + +/* patch sites */ +extern s32 patch__tlb_44x_hwater_D, patch__tlb_44x_hwater_I; + +#endif /* !__ASSEMBLY__ */ + +#ifndef CONFIG_PPC_EARLY_DEBUG_44x +#define PPC44x_EARLY_TLBS 1 +#else +#define PPC44x_EARLY_TLBS 2 +#define PPC44x_EARLY_DEBUG_VIRTADDR (ASM_CONST(0xf0000000) \ + | (ASM_CONST(CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW) & 0xffff)) +#endif + +/* Size of the TLBs used for pinning in lowmem */ +#define PPC_PIN_SIZE (1 << 28) /* 256M */ + +#if defined(CONFIG_PPC_4K_PAGES) +#define PPC44x_TLBE_SIZE PPC44x_TLB_4K +#define PPC47x_TLBE_SIZE PPC47x_TLB0_4K +#define mmu_virtual_psize MMU_PAGE_4K +#elif defined(CONFIG_PPC_16K_PAGES) +#define PPC44x_TLBE_SIZE PPC44x_TLB_16K +#define PPC47x_TLBE_SIZE PPC47x_TLB0_16K +#define mmu_virtual_psize MMU_PAGE_16K +#elif defined(CONFIG_PPC_64K_PAGES) +#define PPC44x_TLBE_SIZE PPC44x_TLB_64K +#define PPC47x_TLBE_SIZE PPC47x_TLB0_64K +#define mmu_virtual_psize MMU_PAGE_64K +#elif defined(CONFIG_PPC_256K_PAGES) +#define PPC44x_TLBE_SIZE PPC44x_TLB_256K +#define mmu_virtual_psize MMU_PAGE_256K +#else +#error "Unsupported PAGE_SIZE" +#endif + +#define mmu_linear_psize MMU_PAGE_256M + +#define PPC44x_PGD_OFF_SHIFT (32 - PGDIR_SHIFT + PGD_T_LOG2) +#define PPC44x_PGD_OFF_MASK_BIT (PGDIR_SHIFT - PGD_T_LOG2) +#define PPC44x_PTE_ADD_SHIFT (32 - PGDIR_SHIFT + PTE_SHIFT + PTE_T_LOG2) +#define PPC44x_PTE_ADD_MASK_BIT (32 - PTE_T_LOG2 - PTE_SHIFT) + +#endif /* _ASM_POWERPC_MMU_44X_H_ */ diff --git a/arch/powerpc/include/asm/nohash/32/mmu-8xx.h b/arch/powerpc/include/asm/nohash/32/mmu-8xx.h new file mode 100644 index 000000000..0bd1b144e --- /dev/null +++ b/arch/powerpc/include/asm/nohash/32/mmu-8xx.h @@ -0,0 +1,231 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_MMU_8XX_H_ +#define _ASM_POWERPC_MMU_8XX_H_ +/* + * PPC8xx support + */ + +/* Control/status registers for the MPC8xx. + * A write operation to these registers causes serialized access. + * During software tablewalk, the registers used perform mask/shift-add + * operations when written/read. A TLB entry is created when the Mx_RPN + * is written, and the contents of several registers are used to + * create the entry. + */ +#define SPRN_MI_CTR 784 /* Instruction TLB control register */ +#define MI_GPM 0x80000000 /* Set domain manager mode */ +#define MI_PPM 0x40000000 /* Set subpage protection */ +#define MI_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */ +#define MI_RSV4I 0x08000000 /* Reserve 4 TLB entries */ +#define MI_PPCS 0x02000000 /* Use MI_RPN prob/priv state */ +#define MI_IDXMASK 0x00001f00 /* TLB index to be loaded */ + +/* These are the Ks and Kp from the PowerPC books. For proper operation, + * Ks = 0, Kp = 1. + */ +#define SPRN_MI_AP 786 +#define MI_Ks 0x80000000 /* Should not be set */ +#define MI_Kp 0x40000000 /* Should always be set */ + +/* + * All pages' PP data bits are set to either 001 or 011 by copying _PAGE_EXEC + * into bit 21 in the ITLBmiss handler (bit 21 is the middle bit), which means + * respectively NA for All or X for Supervisor and no access for User. + * Then we use the APG to say whether accesses are according to Page rules or + * "all Supervisor" rules (Access to all) + * _PAGE_ACCESSED is also managed via APG. When _PAGE_ACCESSED is not set, say + * "all User" rules, that will lead to NA for all. + * Therefore, we define 4 APG groups. lsb is _PAGE_ACCESSED + * 0 => Kernel => 11 (all accesses performed according as user iaw page definition) + * 1 => Kernel+Accessed => 01 (all accesses performed according to page definition) + * 2 => User => 11 (all accesses performed according as user iaw page definition) + * 3 => User+Accessed => 00 (all accesses performed as supervisor iaw page definition) for INIT + * => 10 (all accesses performed according to swaped page definition) for KUEP + * 4-15 => Not Used + */ +#define MI_APG_INIT 0xdc000000 +#define MI_APG_KUEP 0xde000000 + +/* The effective page number register. When read, contains the information + * about the last instruction TLB miss. When MI_RPN is written, bits in + * this register are used to create the TLB entry. + */ +#define SPRN_MI_EPN 787 +#define MI_EPNMASK 0xfffff000 /* Effective page number for entry */ +#define MI_EVALID 0x00000200 /* Entry is valid */ +#define MI_ASIDMASK 0x0000000f /* ASID match value */ + /* Reset value is undefined */ + +/* A "level 1" or "segment" or whatever you want to call it register. + * For the instruction TLB, it contains bits that get loaded into the + * TLB entry when the MI_RPN is written. + */ +#define SPRN_MI_TWC 789 +#define MI_APG 0x000001e0 /* Access protection group (0) */ +#define MI_GUARDED 0x00000010 /* Guarded storage */ +#define MI_PSMASK 0x0000000c /* Mask of page size bits */ +#define MI_PS8MEG 0x0000000c /* 8M page size */ +#define MI_PS512K 0x00000004 /* 512K page size */ +#define MI_PS4K_16K 0x00000000 /* 4K or 16K page size */ +#define MI_SVALID 0x00000001 /* Segment entry is valid */ + /* Reset value is undefined */ + +/* Real page number. Defined by the pte. Writing this register + * causes a TLB entry to be created for the instruction TLB, using + * additional information from the MI_EPN, and MI_TWC registers. + */ +#define SPRN_MI_RPN 790 +#define MI_SPS16K 0x00000008 /* Small page size (0 = 4k, 1 = 16k) */ + +/* Define an RPN value for mapping kernel memory to large virtual + * pages for boot initialization. This has real page number of 0, + * large page size, shared page, cache enabled, and valid. + * Also mark all subpages valid and write access. + */ +#define MI_BOOTINIT 0x000001fd + +#define SPRN_MD_CTR 792 /* Data TLB control register */ +#define MD_GPM 0x80000000 /* Set domain manager mode */ +#define MD_PPM 0x40000000 /* Set subpage protection */ +#define MD_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */ +#define MD_WTDEF 0x10000000 /* Set writethrough when MMU dis */ +#define MD_RSV4I 0x08000000 /* Reserve 4 TLB entries */ +#define MD_TWAM 0x04000000 /* Use 4K page hardware assist */ +#define MD_PPCS 0x02000000 /* Use MI_RPN prob/priv state */ +#define MD_IDXMASK 0x00001f00 /* TLB index to be loaded */ + +#define SPRN_M_CASID 793 /* Address space ID (context) to match */ +#define MC_ASIDMASK 0x0000000f /* Bits used for ASID value */ + + +/* These are the Ks and Kp from the PowerPC books. For proper operation, + * Ks = 0, Kp = 1. + */ +#define SPRN_MD_AP 794 +#define MD_Ks 0x80000000 /* Should not be set */ +#define MD_Kp 0x40000000 /* Should always be set */ + +/* See explanation above at the definition of MI_APG_INIT */ +#define MD_APG_INIT 0xdc000000 +#define MD_APG_KUAP 0xde000000 + +/* The effective page number register. When read, contains the information + * about the last instruction TLB miss. When MD_RPN is written, bits in + * this register are used to create the TLB entry. + */ +#define SPRN_MD_EPN 795 +#define MD_EPNMASK 0xfffff000 /* Effective page number for entry */ +#define MD_EVALID 0x00000200 /* Entry is valid */ +#define MD_ASIDMASK 0x0000000f /* ASID match value */ + /* Reset value is undefined */ + +/* The pointer to the base address of the first level page table. + * During a software tablewalk, reading this register provides the address + * of the entry associated with MD_EPN. + */ +#define SPRN_M_TWB 796 +#define M_L1TB 0xfffff000 /* Level 1 table base address */ +#define M_L1INDX 0x00000ffc /* Level 1 index, when read */ + /* Reset value is undefined */ + +/* A "level 1" or "segment" or whatever you want to call it register. + * For the data TLB, it contains bits that get loaded into the TLB entry + * when the MD_RPN is written. It is also provides the hardware assist + * for finding the PTE address during software tablewalk. + */ +#define SPRN_MD_TWC 797 +#define MD_L2TB 0xfffff000 /* Level 2 table base address */ +#define MD_L2INDX 0xfffffe00 /* Level 2 index (*pte), when read */ +#define MD_APG 0x000001e0 /* Access protection group (0) */ +#define MD_GUARDED 0x00000010 /* Guarded storage */ +#define MD_PSMASK 0x0000000c /* Mask of page size bits */ +#define MD_PS8MEG 0x0000000c /* 8M page size */ +#define MD_PS512K 0x00000004 /* 512K page size */ +#define MD_PS4K_16K 0x00000000 /* 4K or 16K page size */ +#define MD_WT 0x00000002 /* Use writethrough page attribute */ +#define MD_SVALID 0x00000001 /* Segment entry is valid */ + /* Reset value is undefined */ + + +/* Real page number. Defined by the pte. Writing this register + * causes a TLB entry to be created for the data TLB, using + * additional information from the MD_EPN, and MD_TWC registers. + */ +#define SPRN_MD_RPN 798 +#define MD_SPS16K 0x00000008 /* Small page size (0 = 4k, 1 = 16k) */ + +/* This is a temporary storage register that could be used to save + * a processor working register during a tablewalk. + */ +#define SPRN_M_TW 799 + +#if defined(CONFIG_PPC_4K_PAGES) +#define mmu_virtual_psize MMU_PAGE_4K +#elif defined(CONFIG_PPC_16K_PAGES) +#define mmu_virtual_psize MMU_PAGE_16K +#define PTE_FRAG_NR 4 +#define PTE_FRAG_SIZE_SHIFT 12 +#define PTE_FRAG_SIZE (1UL << 12) +#else +#error "Unsupported PAGE_SIZE" +#endif + +#define mmu_linear_psize MMU_PAGE_8M + +#ifndef __ASSEMBLY__ + +#include <linux/mmdebug.h> + +void mmu_pin_tlb(unsigned long top, bool readonly); + +typedef struct { + unsigned int id; + unsigned int active; + unsigned long vdso_base; + void *pte_frag; +} mm_context_t; + +#define PHYS_IMMR_BASE (mfspr(SPRN_IMMR) & 0xfff80000) +#define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE)) + +/* Page size definitions, common between 32 and 64-bit + * + * shift : is the "PAGE_SHIFT" value for that page size + * penc : is the pte encoding mask + * + */ +struct mmu_psize_def { + unsigned int shift; /* number of bits */ + unsigned int enc; /* PTE encoding */ + unsigned int ind; /* Corresponding indirect page size shift */ + unsigned int flags; +#define MMU_PAGE_SIZE_DIRECT 0x1 /* Supported as a direct size */ +#define MMU_PAGE_SIZE_INDIRECT 0x2 /* Supported as an indirect size */ +}; + +extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; + +static inline int shift_to_mmu_psize(unsigned int shift) +{ + int psize; + + for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) + if (mmu_psize_defs[psize].shift == shift) + return psize; + return -1; +} + +static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize) +{ + if (mmu_psize_defs[mmu_psize].shift) + return mmu_psize_defs[mmu_psize].shift; + BUG(); +} + +/* patch sites */ +extern s32 patch__itlbmiss_exit_1, patch__dtlbmiss_exit_1; +extern s32 patch__itlbmiss_perf, patch__dtlbmiss_perf; + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_MMU_8XX_H_ */ diff --git a/arch/powerpc/include/asm/nohash/32/pgalloc.h b/arch/powerpc/include/asm/nohash/32/pgalloc.h new file mode 100644 index 000000000..11eac371e --- /dev/null +++ b/arch/powerpc/include/asm/nohash/32/pgalloc.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_PGALLOC_32_H +#define _ASM_POWERPC_PGALLOC_32_H + +#include <linux/threads.h> +#include <linux/slab.h> + +/* + * We don't have any real pmd's, and this code never triggers because + * the pgd will always be present.. + */ +/* #define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); }) */ +#define pmd_free(mm, x) do { } while (0) +#define __pmd_free_tlb(tlb,x,a) do { } while (0) +/* #define pgd_populate(mm, pmd, pte) BUG() */ + +static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, + pte_t *pte) +{ + if (IS_ENABLED(CONFIG_BOOKE)) + *pmdp = __pmd((unsigned long)pte | _PMD_PRESENT); + else + *pmdp = __pmd(__pa(pte) | _PMD_PRESENT); +} + +static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmdp, + pgtable_t pte_page) +{ + if (IS_ENABLED(CONFIG_BOOKE)) + *pmdp = __pmd((unsigned long)pte_page | _PMD_PRESENT); + else + *pmdp = __pmd(__pa(pte_page) | _PMD_USER | _PMD_PRESENT); +} + +#endif /* _ASM_POWERPC_PGALLOC_32_H */ diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h new file mode 100644 index 000000000..e53cc07e6 --- /dev/null +++ b/arch/powerpc/include/asm/nohash/32/pgtable.h @@ -0,0 +1,375 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_NOHASH_32_PGTABLE_H +#define _ASM_POWERPC_NOHASH_32_PGTABLE_H + +#include <asm-generic/pgtable-nopmd.h> + +#ifndef __ASSEMBLY__ +#include <linux/sched.h> +#include <linux/threads.h> +#include <asm/mmu.h> /* For sub-arch specific PPC_PIN_SIZE */ + +#ifdef CONFIG_44x +extern int icache_44x_need_flush; +#endif + +#endif /* __ASSEMBLY__ */ + +#define PTE_INDEX_SIZE PTE_SHIFT +#define PMD_INDEX_SIZE 0 +#define PUD_INDEX_SIZE 0 +#define PGD_INDEX_SIZE (32 - PGDIR_SHIFT) + +#define PMD_CACHE_INDEX PMD_INDEX_SIZE +#define PUD_CACHE_INDEX PUD_INDEX_SIZE + +#ifndef __ASSEMBLY__ +#define PTE_TABLE_SIZE (sizeof(pte_t) << PTE_INDEX_SIZE) +#define PMD_TABLE_SIZE 0 +#define PUD_TABLE_SIZE 0 +#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE) + +#define PMD_MASKED_BITS (PTE_TABLE_SIZE - 1) +#endif /* __ASSEMBLY__ */ + +#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE) +#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE) + +/* + * The normal case is that PTEs are 32-bits and we have a 1-page + * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus + * + * For any >32-bit physical address platform, we can use the following + * two level page table layout where the pgdir is 8KB and the MS 13 bits + * are an index to the second level table. The combined pgdir/pmd first + * level has 2048 entries and the second level has 512 64-bit PTE entries. + * -Matt + */ +/* PGDIR_SHIFT determines what a top-level page table entry can map */ +#define PGDIR_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* Bits to mask out from a PGD to get to the PUD page */ +#define PGD_MASKED_BITS 0 + +#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) +#define FIRST_USER_ADDRESS 0UL + +#define pte_ERROR(e) \ + pr_err("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \ + (unsigned long long)pte_val(e)) +#define pgd_ERROR(e) \ + pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + +#ifndef __ASSEMBLY__ + +int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot); +void unmap_kernel_page(unsigned long va); + +#endif /* !__ASSEMBLY__ */ + + +/* + * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary + * value (for now) on others, from where we can start layout kernel + * virtual space that goes below PKMAP and FIXMAP + */ +#include <asm/fixmap.h> + +/* + * ioremap_bot starts at that address. Early ioremaps move down from there, + * until mem_init() at which point this becomes the top of the vmalloc + * and ioremap space + */ +#ifdef CONFIG_HIGHMEM +#define IOREMAP_TOP PKMAP_BASE +#else +#define IOREMAP_TOP FIXADDR_START +#endif + +/* PPC32 shares vmalloc area with ioremap */ +#define IOREMAP_START VMALLOC_START +#define IOREMAP_END VMALLOC_END + +/* + * Just any arbitrary offset to the start of the vmalloc VM area: the + * current 16MB value just means that there will be a 64MB "hole" after the + * physical memory until the kernel virtual memory starts. That means that + * any out-of-bounds memory accesses will hopefully be caught. + * The vmalloc() routines leaves a hole of 4kB between each vmalloced + * area for the same reason. ;) + * + * We no longer map larger than phys RAM with the BATs so we don't have + * to worry about the VMALLOC_OFFSET causing problems. We do have to worry + * about clashes between our early calls to ioremap() that start growing down + * from IOREMAP_TOP being run into the VM area allocations (growing upwards + * from VMALLOC_START). For this reason we have ioremap_bot to check when + * we actually run into our mappings setup in the early boot with the VM + * system. This really does become a problem for machines with good amounts + * of RAM. -- Cort + */ +#define VMALLOC_OFFSET (0x1000000) /* 16M */ +#ifdef PPC_PIN_SIZE +#define VMALLOC_START (((ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))) +#else +#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))) +#endif + +#ifdef CONFIG_KASAN_VMALLOC +#define VMALLOC_END ALIGN_DOWN(ioremap_bot, PAGE_SIZE << KASAN_SHADOW_SCALE_SHIFT) +#else +#define VMALLOC_END ioremap_bot +#endif + +/* + * Bits in a linux-style PTE. These match the bits in the + * (hardware-defined) PowerPC PTE as closely as possible. + */ + +#if defined(CONFIG_40x) +#include <asm/nohash/32/pte-40x.h> +#elif defined(CONFIG_44x) +#include <asm/nohash/32/pte-44x.h> +#elif defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT) +#include <asm/nohash/pte-book3e.h> +#elif defined(CONFIG_FSL_BOOKE) +#include <asm/nohash/32/pte-fsl-booke.h> +#elif defined(CONFIG_PPC_8xx) +#include <asm/nohash/32/pte-8xx.h> +#endif + +/* + * Location of the PFN in the PTE. Most 32-bit platforms use the same + * as _PAGE_SHIFT here (ie, naturally aligned). + * Platform who don't just pre-define the value so we don't override it here. + */ +#ifndef PTE_RPN_SHIFT +#define PTE_RPN_SHIFT (PAGE_SHIFT) +#endif + +/* + * The mask covered by the RPN must be a ULL on 32-bit platforms with + * 64-bit PTEs. + */ +#if defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT) +#define PTE_RPN_MASK (~((1ULL << PTE_RPN_SHIFT) - 1)) +#define MAX_POSSIBLE_PHYSMEM_BITS 36 +#else +#define PTE_RPN_MASK (~((1UL << PTE_RPN_SHIFT) - 1)) +#define MAX_POSSIBLE_PHYSMEM_BITS 32 +#endif + +/* + * _PAGE_CHG_MASK masks of bits that are to be preserved across + * pgprot changes. + */ +#define _PAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_SPECIAL) + +#ifndef __ASSEMBLY__ + +#define pte_clear(mm, addr, ptep) \ + do { pte_update(mm, addr, ptep, ~0, 0, 0); } while (0) + +#ifndef pte_mkwrite +static inline pte_t pte_mkwrite(pte_t pte) +{ + return __pte(pte_val(pte) | _PAGE_RW); +} +#endif + +static inline pte_t pte_mkdirty(pte_t pte) +{ + return __pte(pte_val(pte) | _PAGE_DIRTY); +} + +static inline pte_t pte_mkyoung(pte_t pte) +{ + return __pte(pte_val(pte) | _PAGE_ACCESSED); +} + +#ifndef pte_wrprotect +static inline pte_t pte_wrprotect(pte_t pte) +{ + return __pte(pte_val(pte) & ~_PAGE_RW); +} +#endif + +static inline pte_t pte_mkexec(pte_t pte) +{ + return __pte(pte_val(pte) | _PAGE_EXEC); +} + +#define pmd_none(pmd) (!pmd_val(pmd)) +#define pmd_bad(pmd) (pmd_val(pmd) & _PMD_BAD) +#define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT_MASK) +static inline void pmd_clear(pmd_t *pmdp) +{ + *pmdp = __pmd(0); +} + +/* + * PTE updates. This function is called whenever an existing + * valid PTE is updated. This does -not- include set_pte_at() + * which nowadays only sets a new PTE. + * + * Depending on the type of MMU, we may need to use atomic updates + * and the PTE may be either 32 or 64 bit wide. In the later case, + * when using atomic updates, only the low part of the PTE is + * accessed atomically. + * + * In addition, on 44x, we also maintain a global flag indicating + * that an executable user mapping was modified, which is needed + * to properly flush the virtually tagged instruction cache of + * those implementations. + * + * On the 8xx, the page tables are a bit special. For 16k pages, we have + * 4 identical entries. For 512k pages, we have 128 entries as if it was + * 4k pages, but they are flagged as 512k pages for the hardware. + * For other page sizes, we have a single entry in the table. + */ +#ifdef CONFIG_PPC_8xx +static pmd_t *pmd_off(struct mm_struct *mm, unsigned long addr); +static int hugepd_ok(hugepd_t hpd); + +static int number_of_cells_per_pte(pmd_t *pmd, pte_basic_t val, int huge) +{ + if (!huge) + return PAGE_SIZE / SZ_4K; + else if (hugepd_ok(*((hugepd_t *)pmd))) + return 1; + else if (IS_ENABLED(CONFIG_PPC_4K_PAGES) && !(val & _PAGE_HUGE)) + return SZ_16K / SZ_4K; + else + return SZ_512K / SZ_4K; +} + +static inline pte_basic_t pte_update(struct mm_struct *mm, unsigned long addr, pte_t *p, + unsigned long clr, unsigned long set, int huge) +{ + pte_basic_t *entry = &p->pte; + pte_basic_t old = pte_val(*p); + pte_basic_t new = (old & ~(pte_basic_t)clr) | set; + int num, i; + pmd_t *pmd = pmd_off(mm, addr); + + num = number_of_cells_per_pte(pmd, new, huge); + + for (i = 0; i < num; i++, entry++, new += SZ_4K) + *entry = new; + + return old; +} + +#ifdef CONFIG_PPC_16K_PAGES +#define __HAVE_ARCH_PTEP_GET +static inline pte_t ptep_get(pte_t *ptep) +{ + pte_basic_t val = READ_ONCE(ptep->pte); + pte_t pte = {val, val, val, val}; + + return pte; +} +#endif /* CONFIG_PPC_16K_PAGES */ + +#else +static inline pte_basic_t pte_update(struct mm_struct *mm, unsigned long addr, pte_t *p, + unsigned long clr, unsigned long set, int huge) +{ + pte_basic_t old = pte_val(*p); + pte_basic_t new = (old & ~(pte_basic_t)clr) | set; + + *p = __pte(new); + +#ifdef CONFIG_44x + if ((old & _PAGE_USER) && (old & _PAGE_EXEC)) + icache_44x_need_flush = 1; +#endif + return old; +} +#endif + +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG +static inline int __ptep_test_and_clear_young(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + unsigned long old; + old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0, 0); + return (old & _PAGE_ACCESSED) != 0; +} +#define ptep_test_and_clear_young(__vma, __addr, __ptep) \ + __ptep_test_and_clear_young((__vma)->vm_mm, __addr, __ptep) + +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) +{ + return __pte(pte_update(mm, addr, ptep, ~0, 0, 0)); +} + +#define __HAVE_ARCH_PTEP_SET_WRPROTECT +static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) +{ + unsigned long clr = ~pte_val(pte_wrprotect(__pte(~0))); + unsigned long set = pte_val(pte_wrprotect(__pte(0))); + + pte_update(mm, addr, ptep, clr, set, 0); +} + +static inline void __ptep_set_access_flags(struct vm_area_struct *vma, + pte_t *ptep, pte_t entry, + unsigned long address, + int psize) +{ + pte_t pte_set = pte_mkyoung(pte_mkdirty(pte_mkwrite(pte_mkexec(__pte(0))))); + pte_t pte_clr = pte_mkyoung(pte_mkdirty(pte_mkwrite(pte_mkexec(__pte(~0))))); + unsigned long set = pte_val(entry) & pte_val(pte_set); + unsigned long clr = ~pte_val(entry) & ~pte_val(pte_clr); + int huge = psize > mmu_virtual_psize ? 1 : 0; + + pte_update(vma->vm_mm, address, ptep, clr, set, huge); + + flush_tlb_page(vma, address); +} + +static inline int pte_young(pte_t pte) +{ + return pte_val(pte) & _PAGE_ACCESSED; +} + +#define __HAVE_ARCH_PTE_SAME +#define pte_same(A,B) ((pte_val(A) ^ pte_val(B)) == 0) + +/* + * Note that on Book E processors, the pmd contains the kernel virtual + * (lowmem) address of the pte page. The physical address is less useful + * because everything runs with translation enabled (even the TLB miss + * handler). On everything else the pmd contains the physical address + * of the pte page. -- paulus + */ +#ifndef CONFIG_BOOKE +#define pmd_page(pmd) \ + pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT) +#else +#define pmd_page_vaddr(pmd) \ + ((unsigned long)(pmd_val(pmd) & ~(PTE_TABLE_SIZE - 1))) +#define pmd_page(pmd) \ + pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT)) +#endif + +/* + * Encode and decode a swap entry. + * Note that the bits we use in a PTE for representing a swap entry + * must not include the _PAGE_PRESENT bit. + * -- paulus + */ +#define __swp_type(entry) ((entry).val & 0x1f) +#define __swp_offset(entry) ((entry).val >> 5) +#define __swp_entry(type, offset) ((swp_entry_t) { (type) | ((offset) << 5) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 3 }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 3 }) + +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_POWERPC_NOHASH_32_PGTABLE_H */ diff --git a/arch/powerpc/include/asm/nohash/32/pte-40x.h b/arch/powerpc/include/asm/nohash/32/pte-40x.h new file mode 100644 index 000000000..acf61242e --- /dev/null +++ b/arch/powerpc/include/asm/nohash/32/pte-40x.h @@ -0,0 +1,85 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_NOHASH_32_PTE_40x_H +#define _ASM_POWERPC_NOHASH_32_PTE_40x_H +#ifdef __KERNEL__ + +/* + * At present, all PowerPC 400-class processors share a similar TLB + * architecture. The instruction and data sides share a unified, + * 64-entry, fully-associative TLB which is maintained totally under + * software control. In addition, the instruction side has a + * hardware-managed, 4-entry, fully-associative TLB which serves as a + * first level to the shared TLB. These two TLBs are known as the UTLB + * and ITLB, respectively (see "mmu.h" for definitions). + * + * There are several potential gotchas here. The 40x hardware TLBLO + * field looks like this: + * + * 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31 + * RPN..................... 0 0 EX WR ZSEL....... W I M G + * + * Where possible we make the Linux PTE bits match up with this + * + * - bits 20 and 21 must be cleared, because we use 4k pages (40x can + * support down to 1k pages), this is done in the TLBMiss exception + * handler. + * - We use only zones 0 (for kernel pages) and 1 (for user pages) + * of the 16 available. Bit 24-26 of the TLB are cleared in the TLB + * miss handler. Bit 27 is PAGE_USER, thus selecting the correct + * zone. + * - PRESENT *must* be in the bottom two bits because swap cache + * entries use the top 30 bits. Because 40x doesn't support SMP + * anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30 + * is cleared in the TLB miss handler before the TLB entry is loaded. + * - All other bits of the PTE are loaded into TLBLO without + * modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for + * software PTE bits. We actually use bits 21, 24, 25, and + * 30 respectively for the software bits: ACCESSED, DIRTY, RW, and + * PRESENT. + */ + +#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */ +#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */ +#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */ +#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */ +#define _PAGE_USER 0x010 /* matches one of the zone permission bits */ +#define _PAGE_SPECIAL 0x020 /* software: Special page */ +#define _PAGE_DIRTY 0x080 /* software: dirty page */ +#define _PAGE_RW 0x100 /* hardware: WR, anded with dirty in exception */ +#define _PAGE_EXEC 0x200 /* hardware: EX permission */ +#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */ + +/* No page size encoding in the linux PTE */ +#define _PAGE_PSIZE 0 + +/* cache related flags non existing on 40x */ +#define _PAGE_COHERENT 0 + +#define _PAGE_KERNEL_RO 0 +#define _PAGE_KERNEL_ROX _PAGE_EXEC +#define _PAGE_KERNEL_RW (_PAGE_DIRTY | _PAGE_RW) +#define _PAGE_KERNEL_RWX (_PAGE_DIRTY | _PAGE_RW | _PAGE_EXEC) + +#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */ +#define _PMD_PRESENT_MASK _PMD_PRESENT +#define _PMD_BAD 0x802 +#define _PMD_SIZE_4M 0x0c0 +#define _PMD_SIZE_16M 0x0e0 +#define _PMD_USER 0 + +#define _PTE_NONE_MASK 0 + +#define _PAGE_BASE_NC (_PAGE_PRESENT | _PAGE_ACCESSED) +#define _PAGE_BASE (_PAGE_BASE_NC) + +/* Permission masks used to generate the __P and __S table */ +#define PAGE_NONE __pgprot(_PAGE_BASE) +#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW) +#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC) +#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER) +#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) +#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER) +#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_NOHASH_32_PTE_40x_H */ diff --git a/arch/powerpc/include/asm/nohash/32/pte-44x.h b/arch/powerpc/include/asm/nohash/32/pte-44x.h new file mode 100644 index 000000000..78bc304f7 --- /dev/null +++ b/arch/powerpc/include/asm/nohash/32/pte-44x.h @@ -0,0 +1,128 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_NOHASH_32_PTE_44x_H +#define _ASM_POWERPC_NOHASH_32_PTE_44x_H +#ifdef __KERNEL__ + +/* + * Definitions for PPC440 + * + * Because of the 3 word TLB entries to support 36-bit addressing, + * the attribute are difficult to map in such a fashion that they + * are easily loaded during exception processing. I decided to + * organize the entry so the ERPN is the only portion in the + * upper word of the PTE and the attribute bits below are packed + * in as sensibly as they can be in the area below a 4KB page size + * oriented RPN. This at least makes it easy to load the RPN and + * ERPN fields in the TLB. -Matt + * + * This isn't entirely true anymore, at least some bits are now + * easier to move into the TLB from the PTE. -BenH. + * + * Note that these bits preclude future use of a page size + * less than 4KB. + * + * + * PPC 440 core has following TLB attribute fields; + * + * TLB1: + * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 + * RPN................................. - - - - - - ERPN....... + * + * TLB2: + * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 + * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR + * + * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional + * TLB2 storage attribute fields. Those are: + * + * TLB2: + * 0...10 11 12 13 14 15 16...31 + * no change WL1 IL1I IL1D IL2I IL2D no change + * + * There are some constrains and options, to decide mapping software bits + * into TLB entry. + * + * - PRESENT *must* be in the bottom three bits because swap cache + * entries use the top 29 bits for TLB2. + * + * - CACHE COHERENT bit (M) has no effect on original PPC440 cores, + * because it doesn't support SMP. However, some later 460 variants + * have -some- form of SMP support and so I keep the bit there for + * future use + * + * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used + * for memory protection related functions (see PTE structure in + * include/asm-ppc/mmu.h). The _PAGE_XXX definitions in this file map to the + * above bits. Note that the bit values are CPU specific, not architecture + * specific. + * + * The kernel PTE entry holds an arch-dependent swp_entry structure under + * certain situations. In other words, in such situations some portion of + * the PTE bits are used as a swp_entry. In the PPC implementation, the + * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still + * hold protection values. That means the three protection bits are + * reserved for both PTE and SWAP entry at the most significant three + * LSBs. + * + * There are three protection bits available for SWAP entry: + * _PAGE_PRESENT + * _PAGE_HASHPTE (if HW has) + * + * So those three bits have to be inside of 0-2nd LSB of PTE. + * + */ + +#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */ +#define _PAGE_RW 0x00000002 /* S: Write permission */ +#define _PAGE_EXEC 0x00000004 /* H: Execute permission */ +#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */ +#define _PAGE_DIRTY 0x00000010 /* S: Page dirty */ +#define _PAGE_SPECIAL 0x00000020 /* S: Special page */ +#define _PAGE_USER 0x00000040 /* S: User page */ +#define _PAGE_ENDIAN 0x00000080 /* H: E bit */ +#define _PAGE_GUARDED 0x00000100 /* H: G bit */ +#define _PAGE_COHERENT 0x00000200 /* H: M bit */ +#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */ +#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */ + +/* No page size encoding in the linux PTE */ +#define _PAGE_PSIZE 0 + +#define _PAGE_KERNEL_RO 0 +#define _PAGE_KERNEL_ROX _PAGE_EXEC +#define _PAGE_KERNEL_RW (_PAGE_DIRTY | _PAGE_RW) +#define _PAGE_KERNEL_RWX (_PAGE_DIRTY | _PAGE_RW | _PAGE_EXEC) + +/* TODO: Add large page lowmem mapping support */ +#define _PMD_PRESENT 0 +#define _PMD_PRESENT_MASK (PAGE_MASK) +#define _PMD_BAD (~PAGE_MASK) +#define _PMD_USER 0 + +/* ERPN in a PTE never gets cleared, ignore it */ +#define _PTE_NONE_MASK 0xffffffff00000000ULL + +/* + * We define 2 sets of base prot bits, one for basic pages (ie, + * cacheable kernel and user pages) and one for non cacheable + * pages. We always set _PAGE_COHERENT when SMP is enabled or + * the processor might need it for DMA coherency. + */ +#define _PAGE_BASE_NC (_PAGE_PRESENT | _PAGE_ACCESSED) +#if defined(CONFIG_SMP) +#define _PAGE_BASE (_PAGE_BASE_NC | _PAGE_COHERENT) +#else +#define _PAGE_BASE (_PAGE_BASE_NC) +#endif + +/* Permission masks used to generate the __P and __S table */ +#define PAGE_NONE __pgprot(_PAGE_BASE) +#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW) +#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC) +#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER) +#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) +#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER) +#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_NOHASH_32_PTE_44x_H */ diff --git a/arch/powerpc/include/asm/nohash/32/pte-8xx.h b/arch/powerpc/include/asm/nohash/32/pte-8xx.h new file mode 100644 index 000000000..2b06da0ff --- /dev/null +++ b/arch/powerpc/include/asm/nohash/32/pte-8xx.h @@ -0,0 +1,148 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_NOHASH_32_PTE_8xx_H +#define _ASM_POWERPC_NOHASH_32_PTE_8xx_H +#ifdef __KERNEL__ + +/* + * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk. + * We also use the two level tables, but we can put the real bits in them + * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0, + * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has + * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit + * based upon user/super access. The TLB does not have accessed nor write + * protect. We assume that if the TLB get loaded with an entry it is + * accessed, and overload the changed bit for write protect. We use + * two bits in the software pte that are supposed to be set to zero in + * the TLB entry (24 and 25) for these indicators. Although the level 1 + * descriptor contains the guarded and writethrough/copyback bits, we can + * set these at the page level since they get copied from the Mx_TWC + * register when the TLB entry is loaded. We will use bit 27 for guard, since + * that is where it exists in the MD_TWC, and bit 26 for writethrough. + * These will get masked from the level 2 descriptor at TLB load time, and + * copied to the MD_TWC before it gets loaded. + * Large page sizes added. We currently support two sizes, 4K and 8M. + * This also allows a TLB hander optimization because we can directly + * load the PMD into MD_TWC. The 8M pages are only used for kernel + * mapping of well known areas. The PMD (PGD) entries contain control + * flags in addition to the address, so care must be taken that the + * software no longer assumes these are only pointers. + */ + +/* Definitions for 8xx embedded chips. */ +#define _PAGE_PRESENT 0x0001 /* V: Page is valid */ +#define _PAGE_NO_CACHE 0x0002 /* CI: cache inhibit */ +#define _PAGE_SH 0x0004 /* SH: No ASID (context) compare */ +#define _PAGE_SPS 0x0008 /* SPS: Small Page Size (1 if 16k, 512k or 8M)*/ +#define _PAGE_DIRTY 0x0100 /* C: page changed */ + +/* These 4 software bits must be masked out when the L2 entry is loaded + * into the TLB. + */ +#define _PAGE_GUARDED 0x0010 /* Copied to L1 G entry in DTLB */ +#define _PAGE_ACCESSED 0x0020 /* Copied to L1 APG 1 entry in I/DTLB */ +#define _PAGE_EXEC 0x0040 /* Copied to PP (bit 21) in ITLB */ +#define _PAGE_SPECIAL 0x0080 /* SW entry */ + +#define _PAGE_NA 0x0200 /* Supervisor NA, User no access */ +#define _PAGE_RO 0x0600 /* Supervisor RO, User no access */ + +#define _PAGE_HUGE 0x0800 /* Copied to L1 PS bit 29 */ + +/* cache related flags non existing on 8xx */ +#define _PAGE_COHERENT 0 +#define _PAGE_WRITETHRU 0 + +#define _PAGE_KERNEL_RO (_PAGE_SH | _PAGE_RO) +#define _PAGE_KERNEL_ROX (_PAGE_SH | _PAGE_RO | _PAGE_EXEC) +#define _PAGE_KERNEL_RW (_PAGE_SH | _PAGE_DIRTY) +#define _PAGE_KERNEL_RWX (_PAGE_SH | _PAGE_DIRTY | _PAGE_EXEC) + +#define _PMD_PRESENT 0x0001 +#define _PMD_PRESENT_MASK _PMD_PRESENT +#define _PMD_BAD 0x0f90 +#define _PMD_PAGE_MASK 0x000c +#define _PMD_PAGE_8M 0x000c +#define _PMD_PAGE_512K 0x0004 +#define _PMD_ACCESSED 0x0020 /* APG 1 */ +#define _PMD_USER 0x0040 /* APG 2 */ + +#define _PTE_NONE_MASK 0 + +#ifdef CONFIG_PPC_16K_PAGES +#define _PAGE_PSIZE _PAGE_SPS +#else +#define _PAGE_PSIZE 0 +#endif + +#define _PAGE_BASE_NC (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_PSIZE) +#define _PAGE_BASE (_PAGE_BASE_NC) + +/* Permission masks used to generate the __P and __S table */ +#define PAGE_NONE __pgprot(_PAGE_BASE | _PAGE_NA) +#define PAGE_SHARED __pgprot(_PAGE_BASE) +#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_EXEC) +#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_RO) +#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_RO | _PAGE_EXEC) +#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_RO) +#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_RO | _PAGE_EXEC) + +#ifndef __ASSEMBLY__ +static inline pte_t pte_wrprotect(pte_t pte) +{ + return __pte(pte_val(pte) | _PAGE_RO); +} + +#define pte_wrprotect pte_wrprotect + +static inline int pte_read(pte_t pte) +{ + return (pte_val(pte) & _PAGE_RO) != _PAGE_NA; +} + +#define pte_read pte_read + +static inline int pte_write(pte_t pte) +{ + return !(pte_val(pte) & _PAGE_RO); +} + +#define pte_write pte_write + +static inline pte_t pte_mkwrite(pte_t pte) +{ + return __pte(pte_val(pte) & ~_PAGE_RO); +} + +#define pte_mkwrite pte_mkwrite + +static inline bool pte_user(pte_t pte) +{ + return !(pte_val(pte) & _PAGE_SH); +} + +#define pte_user pte_user + +static inline pte_t pte_mkprivileged(pte_t pte) +{ + return __pte(pte_val(pte) | _PAGE_SH); +} + +#define pte_mkprivileged pte_mkprivileged + +static inline pte_t pte_mkuser(pte_t pte) +{ + return __pte(pte_val(pte) & ~_PAGE_SH); +} + +#define pte_mkuser pte_mkuser + +static inline pte_t pte_mkhuge(pte_t pte) +{ + return __pte(pte_val(pte) | _PAGE_SPS | _PAGE_HUGE); +} + +#define pte_mkhuge pte_mkhuge +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_NOHASH_32_PTE_8xx_H */ diff --git a/arch/powerpc/include/asm/nohash/32/pte-fsl-booke.h b/arch/powerpc/include/asm/nohash/32/pte-fsl-booke.h new file mode 100644 index 000000000..0fc1bd42b --- /dev/null +++ b/arch/powerpc/include/asm/nohash/32/pte-fsl-booke.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_NOHASH_32_PTE_FSL_BOOKE_H +#define _ASM_POWERPC_NOHASH_32_PTE_FSL_BOOKE_H +#ifdef __KERNEL__ + +/* PTE bit definitions for Freescale BookE SW loaded TLB MMU based + * processors + * + MMU Assist Register 3: + + 32 33 34 35 36 ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63 + RPN...................... 0 0 U0 U1 U2 U3 UX SX UW SW UR SR + + - PRESENT *must* be in the bottom three bits because swap cache + entries use the top 29 bits. + +*/ + +/* Definitions for FSL Book-E Cores */ +#define _PAGE_PRESENT 0x00001 /* S: PTE contains a translation */ +#define _PAGE_USER 0x00002 /* S: User page (maps to UR) */ +#define _PAGE_RW 0x00004 /* S: Write permission (SW) */ +#define _PAGE_DIRTY 0x00008 /* S: Page dirty */ +#define _PAGE_EXEC 0x00010 /* H: SX permission */ +#define _PAGE_ACCESSED 0x00020 /* S: Page referenced */ + +#define _PAGE_ENDIAN 0x00040 /* H: E bit */ +#define _PAGE_GUARDED 0x00080 /* H: G bit */ +#define _PAGE_COHERENT 0x00100 /* H: M bit */ +#define _PAGE_NO_CACHE 0x00200 /* H: I bit */ +#define _PAGE_WRITETHRU 0x00400 /* H: W bit */ +#define _PAGE_SPECIAL 0x00800 /* S: Special page */ + +#define _PAGE_KERNEL_RO 0 +#define _PAGE_KERNEL_ROX _PAGE_EXEC +#define _PAGE_KERNEL_RW (_PAGE_DIRTY | _PAGE_RW) +#define _PAGE_KERNEL_RWX (_PAGE_DIRTY | _PAGE_RW | _PAGE_EXEC) + +/* No page size encoding in the linux PTE */ +#define _PAGE_PSIZE 0 + +#define _PMD_PRESENT 0 +#define _PMD_PRESENT_MASK (PAGE_MASK) +#define _PMD_BAD (~PAGE_MASK) +#define _PMD_USER 0 + +#define _PTE_NONE_MASK 0 + +#define PTE_WIMGE_SHIFT (6) + +/* + * We define 2 sets of base prot bits, one for basic pages (ie, + * cacheable kernel and user pages) and one for non cacheable + * pages. We always set _PAGE_COHERENT when SMP is enabled or + * the processor might need it for DMA coherency. + */ +#define _PAGE_BASE_NC (_PAGE_PRESENT | _PAGE_ACCESSED) +#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC) +#define _PAGE_BASE (_PAGE_BASE_NC | _PAGE_COHERENT) +#else +#define _PAGE_BASE (_PAGE_BASE_NC) +#endif + +/* Permission masks used to generate the __P and __S table */ +#define PAGE_NONE __pgprot(_PAGE_BASE) +#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW) +#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC) +#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER) +#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) +#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER) +#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_NOHASH_32_PTE_FSL_BOOKE_H */ diff --git a/arch/powerpc/include/asm/nohash/64/pgalloc.h b/arch/powerpc/include/asm/nohash/64/pgalloc.h new file mode 100644 index 000000000..668aee601 --- /dev/null +++ b/arch/powerpc/include/asm/nohash/64/pgalloc.h @@ -0,0 +1,64 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_PGALLOC_64_H +#define _ASM_POWERPC_PGALLOC_64_H +/* + */ + +#include <linux/slab.h> +#include <linux/cpumask.h> +#include <linux/percpu.h> + +struct vmemmap_backing { + struct vmemmap_backing *list; + unsigned long phys; + unsigned long virt_addr; +}; +extern struct vmemmap_backing *vmemmap_list; + +#define p4d_populate(MM, P4D, PUD) p4d_set(P4D, (unsigned long)PUD) + +static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr) +{ + return kmem_cache_alloc(PGT_CACHE(PUD_INDEX_SIZE), + pgtable_gfp_flags(mm, GFP_KERNEL)); +} + +static inline void pud_free(struct mm_struct *mm, pud_t *pud) +{ + kmem_cache_free(PGT_CACHE(PUD_INDEX_SIZE), pud); +} + +static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) +{ + pud_set(pud, (unsigned long)pmd); +} + +static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, + pte_t *pte) +{ + pmd_set(pmd, (unsigned long)pte); +} + +static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, + pgtable_t pte_page) +{ + pmd_set(pmd, (unsigned long)pte_page); +} + +static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr) +{ + return kmem_cache_alloc(PGT_CACHE(PMD_CACHE_INDEX), + pgtable_gfp_flags(mm, GFP_KERNEL)); +} + +static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) +{ + kmem_cache_free(PGT_CACHE(PMD_CACHE_INDEX), pmd); +} + +#define __pmd_free_tlb(tlb, pmd, addr) \ + pgtable_free_tlb(tlb, pmd, PMD_CACHE_INDEX) +#define __pud_free_tlb(tlb, pud, addr) \ + pgtable_free_tlb(tlb, pud, PUD_INDEX_SIZE) + +#endif /* _ASM_POWERPC_PGALLOC_64_H */ diff --git a/arch/powerpc/include/asm/nohash/64/pgtable-4k.h b/arch/powerpc/include/asm/nohash/64/pgtable-4k.h new file mode 100644 index 000000000..10f5cf444 --- /dev/null +++ b/arch/powerpc/include/asm/nohash/64/pgtable-4k.h @@ -0,0 +1,93 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_NOHASH_64_PGTABLE_4K_H +#define _ASM_POWERPC_NOHASH_64_PGTABLE_4K_H + +#include <asm-generic/pgtable-nop4d.h> + +/* + * Entries per page directory level. The PTE level must use a 64b record + * for each page table entry. The PMD and PGD level use a 32b record for + * each entry by assuming that each entry is page aligned. + */ +#define PTE_INDEX_SIZE 9 +#define PMD_INDEX_SIZE 7 +#define PUD_INDEX_SIZE 9 +#define PGD_INDEX_SIZE 9 + +#ifndef __ASSEMBLY__ +#define PTE_TABLE_SIZE (sizeof(pte_t) << PTE_INDEX_SIZE) +#define PMD_TABLE_SIZE (sizeof(pmd_t) << PMD_INDEX_SIZE) +#define PUD_TABLE_SIZE (sizeof(pud_t) << PUD_INDEX_SIZE) +#define PGD_TABLE_SIZE (sizeof(pgd_t) << PGD_INDEX_SIZE) +#endif /* __ASSEMBLY__ */ + +#define PTRS_PER_PTE (1 << PTE_INDEX_SIZE) +#define PTRS_PER_PMD (1 << PMD_INDEX_SIZE) +#define PTRS_PER_PUD (1 << PUD_INDEX_SIZE) +#define PTRS_PER_PGD (1 << PGD_INDEX_SIZE) + +/* PMD_SHIFT determines what a second-level page table entry can map */ +#define PMD_SHIFT (PAGE_SHIFT + PTE_INDEX_SIZE) +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) + +/* PUD_SHIFT determines what a third-level page table entry can map */ +#define PUD_SHIFT (PMD_SHIFT + PMD_INDEX_SIZE) +#define PUD_SIZE (1UL << PUD_SHIFT) +#define PUD_MASK (~(PUD_SIZE-1)) + +/* PGDIR_SHIFT determines what a fourth-level page table entry can map */ +#define PGDIR_SHIFT (PUD_SHIFT + PUD_INDEX_SIZE) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* Bits to mask out from a PMD to get to the PTE page */ +#define PMD_MASKED_BITS 0 +/* Bits to mask out from a PUD to get to the PMD page */ +#define PUD_MASKED_BITS 0 +/* Bits to mask out from a P4D to get to the PUD page */ +#define P4D_MASKED_BITS 0 + + +/* + * 4-level page tables related bits + */ + +#define p4d_none(p4d) (!p4d_val(p4d)) +#define p4d_bad(p4d) (p4d_val(p4d) == 0) +#define p4d_present(p4d) (p4d_val(p4d) != 0) + +#ifndef __ASSEMBLY__ + +static inline pud_t *p4d_pgtable(p4d_t p4d) +{ + return (pud_t *) (p4d_val(p4d) & ~P4D_MASKED_BITS); +} + +static inline void p4d_clear(p4d_t *p4dp) +{ + *p4dp = __p4d(0); +} + +static inline pte_t p4d_pte(p4d_t p4d) +{ + return __pte(p4d_val(p4d)); +} + +static inline p4d_t pte_p4d(pte_t pte) +{ + return __p4d(pte_val(pte)); +} +extern struct page *p4d_page(p4d_t p4d); + +#endif /* !__ASSEMBLY__ */ + +#define pud_ERROR(e) \ + pr_err("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e)) + +/* + * On all 4K setups, remap_4k_pfn() equates to remap_pfn_range() */ +#define remap_4k_pfn(vma, addr, pfn, prot) \ + remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot)) + +#endif /* _ _ASM_POWERPC_NOHASH_64_PGTABLE_4K_H */ diff --git a/arch/powerpc/include/asm/nohash/64/pgtable.h b/arch/powerpc/include/asm/nohash/64/pgtable.h new file mode 100644 index 000000000..6075fac88 --- /dev/null +++ b/arch/powerpc/include/asm/nohash/64/pgtable.h @@ -0,0 +1,326 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_NOHASH_64_PGTABLE_H +#define _ASM_POWERPC_NOHASH_64_PGTABLE_H +/* + * This file contains the functions and defines necessary to modify and use + * the ppc64 non-hashed page table. + */ + +#include <linux/sizes.h> + +#include <asm/nohash/64/pgtable-4k.h> +#include <asm/barrier.h> +#include <asm/asm-const.h> + +#define FIRST_USER_ADDRESS 0UL + +/* + * Size of EA range mapped by our pagetables. + */ +#define PGTABLE_EADDR_SIZE (PTE_INDEX_SIZE + PMD_INDEX_SIZE + \ + PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT) +#define PGTABLE_RANGE (ASM_CONST(1) << PGTABLE_EADDR_SIZE) + +#define PMD_CACHE_INDEX PMD_INDEX_SIZE +#define PUD_CACHE_INDEX PUD_INDEX_SIZE + +/* + * Define the address range of the kernel non-linear virtual area + */ +#define KERN_VIRT_START ASM_CONST(0x8000000000000000) +#define KERN_VIRT_SIZE ASM_CONST(0x0000100000000000) + +/* + * The vmalloc space starts at the beginning of that region, and + * occupies a quarter of it on Book3E + * (we keep a quarter for the virtual memmap) + */ +#define VMALLOC_START KERN_VIRT_START +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 2) +#define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE) + +/* + * The second half of the kernel virtual space is used for IO mappings, + * it's itself carved into the PIO region (ISA and PHB IO space) and + * the ioremap space + * + * ISA_IO_BASE = KERN_IO_START, 64K reserved area + * PHB_IO_BASE = ISA_IO_BASE + 64K to ISA_IO_BASE + 2G, PHB IO spaces + * IOREMAP_BASE = ISA_IO_BASE + 2G to VMALLOC_START + PGTABLE_RANGE + */ +#define KERN_IO_START (KERN_VIRT_START + (KERN_VIRT_SIZE >> 1)) +#define FULL_IO_SIZE 0x80000000ul +#define ISA_IO_BASE (KERN_IO_START) +#define ISA_IO_END (KERN_IO_START + 0x10000ul) +#define PHB_IO_BASE (ISA_IO_END) +#define PHB_IO_END (KERN_IO_START + FULL_IO_SIZE) +#define IOREMAP_BASE (PHB_IO_END) +#define IOREMAP_START (ioremap_bot) +#define IOREMAP_END (KERN_VIRT_START + KERN_VIRT_SIZE - FIXADDR_SIZE) +#define FIXADDR_SIZE SZ_32M + + +/* + * Region IDs + */ +#define REGION_SHIFT 60UL +#define REGION_MASK (0xfUL << REGION_SHIFT) +#define REGION_ID(ea) (((unsigned long)(ea)) >> REGION_SHIFT) + +#define VMALLOC_REGION_ID (REGION_ID(VMALLOC_START)) +#define KERNEL_REGION_ID (REGION_ID(PAGE_OFFSET)) +#define USER_REGION_ID (0UL) + +/* + * Defines the address of the vmemap area, in its own region on + * after the vmalloc space on Book3E + */ +#define VMEMMAP_BASE VMALLOC_END +#define VMEMMAP_END KERN_IO_START +#define vmemmap ((struct page *)VMEMMAP_BASE) + + +/* + * Include the PTE bits definitions + */ +#include <asm/nohash/pte-book3e.h> + +#define _PAGE_SAO 0 + +#define PTE_RPN_MASK (~((1UL << PTE_RPN_SHIFT) - 1)) + +/* + * _PAGE_CHG_MASK masks of bits that are to be preserved across + * pgprot changes. + */ +#define _PAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_SPECIAL) + +#define H_PAGE_4K_PFN 0 + +#ifndef __ASSEMBLY__ +/* pte_clear moved to later in this file */ + +static inline pte_t pte_mkwrite(pte_t pte) +{ + return __pte(pte_val(pte) | _PAGE_RW); +} + +static inline pte_t pte_mkdirty(pte_t pte) +{ + return __pte(pte_val(pte) | _PAGE_DIRTY); +} + +static inline pte_t pte_mkyoung(pte_t pte) +{ + return __pte(pte_val(pte) | _PAGE_ACCESSED); +} + +static inline pte_t pte_wrprotect(pte_t pte) +{ + return __pte(pte_val(pte) & ~_PAGE_RW); +} + +static inline pte_t pte_mkexec(pte_t pte) +{ + return __pte(pte_val(pte) | _PAGE_EXEC); +} + +#define PMD_BAD_BITS (PTE_TABLE_SIZE-1) +#define PUD_BAD_BITS (PMD_TABLE_SIZE-1) + +static inline void pmd_set(pmd_t *pmdp, unsigned long val) +{ + *pmdp = __pmd(val); +} + +static inline void pmd_clear(pmd_t *pmdp) +{ + *pmdp = __pmd(0); +} + +static inline pte_t pmd_pte(pmd_t pmd) +{ + return __pte(pmd_val(pmd)); +} + +#define pmd_none(pmd) (!pmd_val(pmd)) +#define pmd_bad(pmd) (!is_kernel_addr(pmd_val(pmd)) \ + || (pmd_val(pmd) & PMD_BAD_BITS)) +#define pmd_present(pmd) (!pmd_none(pmd)) +#define pmd_page_vaddr(pmd) (pmd_val(pmd) & ~PMD_MASKED_BITS) +extern struct page *pmd_page(pmd_t pmd); + +static inline void pud_set(pud_t *pudp, unsigned long val) +{ + *pudp = __pud(val); +} + +static inline void pud_clear(pud_t *pudp) +{ + *pudp = __pud(0); +} + +#define pud_none(pud) (!pud_val(pud)) +#define pud_bad(pud) (!is_kernel_addr(pud_val(pud)) \ + || (pud_val(pud) & PUD_BAD_BITS)) +#define pud_present(pud) (pud_val(pud) != 0) + +static inline pmd_t *pud_pgtable(pud_t pud) +{ + return (pmd_t *)(pud_val(pud) & ~PUD_MASKED_BITS); +} + +extern struct page *pud_page(pud_t pud); + +static inline pte_t pud_pte(pud_t pud) +{ + return __pte(pud_val(pud)); +} + +static inline pud_t pte_pud(pte_t pte) +{ + return __pud(pte_val(pte)); +} +#define pud_write(pud) pte_write(pud_pte(pud)) +#define p4d_write(pgd) pte_write(p4d_pte(p4d)) + +static inline void p4d_set(p4d_t *p4dp, unsigned long val) +{ + *p4dp = __p4d(val); +} + +/* Atomic PTE updates */ +static inline unsigned long pte_update(struct mm_struct *mm, + unsigned long addr, + pte_t *ptep, unsigned long clr, + unsigned long set, + int huge) +{ + unsigned long old = pte_val(*ptep); + *ptep = __pte((old & ~clr) | set); + + /* huge pages use the old page table lock */ + if (!huge) + assert_pte_locked(mm, addr); + + return old; +} + +static inline int pte_young(pte_t pte) +{ + return pte_val(pte) & _PAGE_ACCESSED; +} + +static inline int __ptep_test_and_clear_young(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + unsigned long old; + + if (!pte_young(*ptep)) + return 0; + old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0, 0); + return (old & _PAGE_ACCESSED) != 0; +} +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG +#define ptep_test_and_clear_young(__vma, __addr, __ptep) \ +({ \ + int __r; \ + __r = __ptep_test_and_clear_young((__vma)->vm_mm, __addr, __ptep); \ + __r; \ +}) + +#define __HAVE_ARCH_PTEP_SET_WRPROTECT +static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, + pte_t *ptep) +{ + + if ((pte_val(*ptep) & _PAGE_RW) == 0) + return; + + pte_update(mm, addr, ptep, _PAGE_RW, 0, 0); +} + +#define __HAVE_ARCH_HUGE_PTEP_SET_WRPROTECT +static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + if ((pte_val(*ptep) & _PAGE_RW) == 0) + return; + + pte_update(mm, addr, ptep, _PAGE_RW, 0, 1); +} + +#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH +#define ptep_clear_flush_young(__vma, __address, __ptep) \ +({ \ + int __young = __ptep_test_and_clear_young((__vma)->vm_mm, __address, \ + __ptep); \ + __young; \ +}) + +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +static inline pte_t ptep_get_and_clear(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0, 0); + return __pte(old); +} + +static inline void pte_clear(struct mm_struct *mm, unsigned long addr, + pte_t * ptep) +{ + pte_update(mm, addr, ptep, ~0UL, 0, 0); +} + + +/* Set the dirty and/or accessed bits atomically in a linux PTE */ +static inline void __ptep_set_access_flags(struct vm_area_struct *vma, + pte_t *ptep, pte_t entry, + unsigned long address, + int psize) +{ + unsigned long bits = pte_val(entry) & + (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC); + + unsigned long old = pte_val(*ptep); + *ptep = __pte(old | bits); + + flush_tlb_page(vma, address); +} + +#define __HAVE_ARCH_PTE_SAME +#define pte_same(A,B) ((pte_val(A) ^ pte_val(B)) == 0) + +#define pte_ERROR(e) \ + pr_err("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pmd_ERROR(e) \ + pr_err("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) +#define pgd_ERROR(e) \ + pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + +/* Encode and de-code a swap entry */ +#define MAX_SWAPFILES_CHECK() do { \ + BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > SWP_TYPE_BITS); \ + } while (0) + +#define SWP_TYPE_BITS 5 +#define __swp_type(x) (((x).val >> _PAGE_BIT_SWAP_TYPE) \ + & ((1UL << SWP_TYPE_BITS) - 1)) +#define __swp_offset(x) ((x).val >> PTE_RPN_SHIFT) +#define __swp_entry(type, offset) ((swp_entry_t) { \ + ((type) << _PAGE_BIT_SWAP_TYPE) \ + | ((offset) << PTE_RPN_SHIFT) }) + +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val((pte)) }) +#define __swp_entry_to_pte(x) __pte((x).val) + +int map_kernel_page(unsigned long ea, unsigned long pa, pgprot_t prot); +void unmap_kernel_page(unsigned long va); +extern int __meminit vmemmap_create_mapping(unsigned long start, + unsigned long page_size, + unsigned long phys); +extern void vmemmap_remove_mapping(unsigned long start, + unsigned long page_size); +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_NOHASH_64_PGTABLE_H */ diff --git a/arch/powerpc/include/asm/nohash/hugetlb-book3e.h b/arch/powerpc/include/asm/nohash/hugetlb-book3e.h new file mode 100644 index 000000000..ecd8694cb --- /dev/null +++ b/arch/powerpc/include/asm/nohash/hugetlb-book3e.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_NOHASH_HUGETLB_BOOK3E_H +#define _ASM_POWERPC_NOHASH_HUGETLB_BOOK3E_H + +static inline pte_t *hugepd_page(hugepd_t hpd) +{ + if (WARN_ON(!hugepd_ok(hpd))) + return NULL; + + return (pte_t *)((hpd_val(hpd) & ~HUGEPD_SHIFT_MASK) | PD_HUGE); +} + +static inline unsigned int hugepd_shift(hugepd_t hpd) +{ + return hpd_val(hpd) & HUGEPD_SHIFT_MASK; +} + +static inline pte_t *hugepte_offset(hugepd_t hpd, unsigned long addr, + unsigned int pdshift) +{ + /* + * On FSL BookE, we have multiple higher-level table entries that + * point to the same hugepte. Just use the first one since they're all + * identical. So for that case, idx=0. + */ + return hugepd_page(hpd); +} + +void flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr); + +static inline void hugepd_populate(hugepd_t *hpdp, pte_t *new, unsigned int pshift) +{ + /* We use the old format for PPC_FSL_BOOK3E */ + *hpdp = __hugepd(((unsigned long)new & ~PD_HUGE) | pshift); +} + +static inline int check_and_get_huge_psize(int shift) +{ + if (shift & 1) /* Not a power of 4 */ + return -EINVAL; + + return shift_to_mmu_psize(shift); +} + +#endif /* _ASM_POWERPC_NOHASH_HUGETLB_BOOK3E_H */ diff --git a/arch/powerpc/include/asm/nohash/mmu-book3e.h b/arch/powerpc/include/asm/nohash/mmu-book3e.h new file mode 100644 index 000000000..b41004664 --- /dev/null +++ b/arch/powerpc/include/asm/nohash/mmu-book3e.h @@ -0,0 +1,324 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_MMU_BOOK3E_H_ +#define _ASM_POWERPC_MMU_BOOK3E_H_ +/* + * Freescale Book-E/Book-3e (ISA 2.06+) MMU support + */ + +/* Book-3e defined page sizes */ +#define BOOK3E_PAGESZ_1K 0 +#define BOOK3E_PAGESZ_2K 1 +#define BOOK3E_PAGESZ_4K 2 +#define BOOK3E_PAGESZ_8K 3 +#define BOOK3E_PAGESZ_16K 4 +#define BOOK3E_PAGESZ_32K 5 +#define BOOK3E_PAGESZ_64K 6 +#define BOOK3E_PAGESZ_128K 7 +#define BOOK3E_PAGESZ_256K 8 +#define BOOK3E_PAGESZ_512K 9 +#define BOOK3E_PAGESZ_1M 10 +#define BOOK3E_PAGESZ_2M 11 +#define BOOK3E_PAGESZ_4M 12 +#define BOOK3E_PAGESZ_8M 13 +#define BOOK3E_PAGESZ_16M 14 +#define BOOK3E_PAGESZ_32M 15 +#define BOOK3E_PAGESZ_64M 16 +#define BOOK3E_PAGESZ_128M 17 +#define BOOK3E_PAGESZ_256M 18 +#define BOOK3E_PAGESZ_512M 19 +#define BOOK3E_PAGESZ_1GB 20 +#define BOOK3E_PAGESZ_2GB 21 +#define BOOK3E_PAGESZ_4GB 22 +#define BOOK3E_PAGESZ_8GB 23 +#define BOOK3E_PAGESZ_16GB 24 +#define BOOK3E_PAGESZ_32GB 25 +#define BOOK3E_PAGESZ_64GB 26 +#define BOOK3E_PAGESZ_128GB 27 +#define BOOK3E_PAGESZ_256GB 28 +#define BOOK3E_PAGESZ_512GB 29 +#define BOOK3E_PAGESZ_1TB 30 +#define BOOK3E_PAGESZ_2TB 31 + +/* MAS registers bit definitions */ + +#define MAS0_TLBSEL_MASK 0x30000000 +#define MAS0_TLBSEL_SHIFT 28 +#define MAS0_TLBSEL(x) (((x) << MAS0_TLBSEL_SHIFT) & MAS0_TLBSEL_MASK) +#define MAS0_GET_TLBSEL(mas0) (((mas0) & MAS0_TLBSEL_MASK) >> \ + MAS0_TLBSEL_SHIFT) +#define MAS0_ESEL_MASK 0x0FFF0000 +#define MAS0_ESEL_SHIFT 16 +#define MAS0_ESEL(x) (((x) << MAS0_ESEL_SHIFT) & MAS0_ESEL_MASK) +#define MAS0_NV(x) ((x) & 0x00000FFF) +#define MAS0_HES 0x00004000 +#define MAS0_WQ_ALLWAYS 0x00000000 +#define MAS0_WQ_COND 0x00001000 +#define MAS0_WQ_CLR_RSRV 0x00002000 + +#define MAS1_VALID 0x80000000 +#define MAS1_IPROT 0x40000000 +#define MAS1_TID(x) (((x) << 16) & 0x3FFF0000) +#define MAS1_IND 0x00002000 +#define MAS1_TS 0x00001000 +#define MAS1_TSIZE_MASK 0x00000f80 +#define MAS1_TSIZE_SHIFT 7 +#define MAS1_TSIZE(x) (((x) << MAS1_TSIZE_SHIFT) & MAS1_TSIZE_MASK) +#define MAS1_GET_TSIZE(mas1) (((mas1) & MAS1_TSIZE_MASK) >> MAS1_TSIZE_SHIFT) + +#define MAS2_EPN (~0xFFFUL) +#define MAS2_X0 0x00000040 +#define MAS2_X1 0x00000020 +#define MAS2_W 0x00000010 +#define MAS2_I 0x00000008 +#define MAS2_M 0x00000004 +#define MAS2_G 0x00000002 +#define MAS2_E 0x00000001 +#define MAS2_WIMGE_MASK 0x0000001f +#define MAS2_EPN_MASK(size) (~0 << (size + 10)) + +#define MAS3_RPN 0xFFFFF000 +#define MAS3_U0 0x00000200 +#define MAS3_U1 0x00000100 +#define MAS3_U2 0x00000080 +#define MAS3_U3 0x00000040 +#define MAS3_UX 0x00000020 +#define MAS3_SX 0x00000010 +#define MAS3_UW 0x00000008 +#define MAS3_SW 0x00000004 +#define MAS3_UR 0x00000002 +#define MAS3_SR 0x00000001 +#define MAS3_BAP_MASK 0x0000003f +#define MAS3_SPSIZE 0x0000003e +#define MAS3_SPSIZE_SHIFT 1 + +#define MAS4_TLBSEL_MASK MAS0_TLBSEL_MASK +#define MAS4_TLBSELD(x) MAS0_TLBSEL(x) +#define MAS4_INDD 0x00008000 /* Default IND */ +#define MAS4_TSIZED(x) MAS1_TSIZE(x) +#define MAS4_X0D 0x00000040 +#define MAS4_X1D 0x00000020 +#define MAS4_WD 0x00000010 +#define MAS4_ID 0x00000008 +#define MAS4_MD 0x00000004 +#define MAS4_GD 0x00000002 +#define MAS4_ED 0x00000001 +#define MAS4_WIMGED_MASK 0x0000001f /* Default WIMGE */ +#define MAS4_WIMGED_SHIFT 0 +#define MAS4_VLED MAS4_X1D /* Default VLE */ +#define MAS4_ACMD 0x000000c0 /* Default ACM */ +#define MAS4_ACMD_SHIFT 6 +#define MAS4_TSIZED_MASK 0x00000f80 /* Default TSIZE */ +#define MAS4_TSIZED_SHIFT 7 + +#define MAS5_SGS 0x80000000 + +#define MAS6_SPID0 0x3FFF0000 +#define MAS6_SPID1 0x00007FFE +#define MAS6_ISIZE(x) MAS1_TSIZE(x) +#define MAS6_SAS 0x00000001 +#define MAS6_SPID MAS6_SPID0 +#define MAS6_SIND 0x00000002 /* Indirect page */ +#define MAS6_SIND_SHIFT 1 +#define MAS6_SPID_MASK 0x3fff0000 +#define MAS6_SPID_SHIFT 16 +#define MAS6_ISIZE_MASK 0x00000f80 +#define MAS6_ISIZE_SHIFT 7 + +#define MAS7_RPN 0xFFFFFFFF + +#define MAS8_TGS 0x80000000 /* Guest space */ +#define MAS8_VF 0x40000000 /* Virtualization Fault */ +#define MAS8_TLPID 0x000000ff + +/* Bit definitions for MMUCFG */ +#define MMUCFG_MAVN 0x00000003 /* MMU Architecture Version Number */ +#define MMUCFG_MAVN_V1 0x00000000 /* v1.0 */ +#define MMUCFG_MAVN_V2 0x00000001 /* v2.0 */ +#define MMUCFG_NTLBS 0x0000000c /* Number of TLBs */ +#define MMUCFG_PIDSIZE 0x000007c0 /* PID Reg Size */ +#define MMUCFG_TWC 0x00008000 /* TLB Write Conditional (v2.0) */ +#define MMUCFG_LRAT 0x00010000 /* LRAT Supported (v2.0) */ +#define MMUCFG_RASIZE 0x00fe0000 /* Real Addr Size */ +#define MMUCFG_LPIDSIZE 0x0f000000 /* LPID Reg Size */ + +/* Bit definitions for MMUCSR0 */ +#define MMUCSR0_TLB1FI 0x00000002 /* TLB1 Flash invalidate */ +#define MMUCSR0_TLB0FI 0x00000004 /* TLB0 Flash invalidate */ +#define MMUCSR0_TLB2FI 0x00000040 /* TLB2 Flash invalidate */ +#define MMUCSR0_TLB3FI 0x00000020 /* TLB3 Flash invalidate */ +#define MMUCSR0_TLBFI (MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \ + MMUCSR0_TLB2FI | MMUCSR0_TLB3FI) +#define MMUCSR0_TLB0PS 0x00000780 /* TLB0 Page Size */ +#define MMUCSR0_TLB1PS 0x00007800 /* TLB1 Page Size */ +#define MMUCSR0_TLB2PS 0x00078000 /* TLB2 Page Size */ +#define MMUCSR0_TLB3PS 0x00780000 /* TLB3 Page Size */ + +/* MMUCFG bits */ +#define MMUCFG_MAVN_NASK 0x00000003 +#define MMUCFG_MAVN_V1_0 0x00000000 +#define MMUCFG_MAVN_V2_0 0x00000001 +#define MMUCFG_NTLB_MASK 0x0000000c +#define MMUCFG_NTLB_SHIFT 2 +#define MMUCFG_PIDSIZE_MASK 0x000007c0 +#define MMUCFG_PIDSIZE_SHIFT 6 +#define MMUCFG_TWC 0x00008000 +#define MMUCFG_LRAT 0x00010000 +#define MMUCFG_RASIZE_MASK 0x00fe0000 +#define MMUCFG_RASIZE_SHIFT 17 +#define MMUCFG_LPIDSIZE_MASK 0x0f000000 +#define MMUCFG_LPIDSIZE_SHIFT 24 + +/* TLBnCFG encoding */ +#define TLBnCFG_N_ENTRY 0x00000fff /* number of entries */ +#define TLBnCFG_HES 0x00002000 /* HW select supported */ +#define TLBnCFG_IPROT 0x00008000 /* IPROT supported */ +#define TLBnCFG_GTWE 0x00010000 /* Guest can write */ +#define TLBnCFG_IND 0x00020000 /* IND entries supported */ +#define TLBnCFG_PT 0x00040000 /* Can load from page table */ +#define TLBnCFG_MINSIZE 0x00f00000 /* Minimum Page Size (v1.0) */ +#define TLBnCFG_MINSIZE_SHIFT 20 +#define TLBnCFG_MAXSIZE 0x000f0000 /* Maximum Page Size (v1.0) */ +#define TLBnCFG_MAXSIZE_SHIFT 16 +#define TLBnCFG_ASSOC 0xff000000 /* Associativity */ +#define TLBnCFG_ASSOC_SHIFT 24 + +/* TLBnPS encoding */ +#define TLBnPS_4K 0x00000004 +#define TLBnPS_8K 0x00000008 +#define TLBnPS_16K 0x00000010 +#define TLBnPS_32K 0x00000020 +#define TLBnPS_64K 0x00000040 +#define TLBnPS_128K 0x00000080 +#define TLBnPS_256K 0x00000100 +#define TLBnPS_512K 0x00000200 +#define TLBnPS_1M 0x00000400 +#define TLBnPS_2M 0x00000800 +#define TLBnPS_4M 0x00001000 +#define TLBnPS_8M 0x00002000 +#define TLBnPS_16M 0x00004000 +#define TLBnPS_32M 0x00008000 +#define TLBnPS_64M 0x00010000 +#define TLBnPS_128M 0x00020000 +#define TLBnPS_256M 0x00040000 +#define TLBnPS_512M 0x00080000 +#define TLBnPS_1G 0x00100000 +#define TLBnPS_2G 0x00200000 +#define TLBnPS_4G 0x00400000 +#define TLBnPS_8G 0x00800000 +#define TLBnPS_16G 0x01000000 +#define TLBnPS_32G 0x02000000 +#define TLBnPS_64G 0x04000000 +#define TLBnPS_128G 0x08000000 +#define TLBnPS_256G 0x10000000 + +/* tlbilx action encoding */ +#define TLBILX_T_ALL 0 +#define TLBILX_T_TID 1 +#define TLBILX_T_FULLMATCH 3 +#define TLBILX_T_CLASS0 4 +#define TLBILX_T_CLASS1 5 +#define TLBILX_T_CLASS2 6 +#define TLBILX_T_CLASS3 7 + +/* + * The mapping only needs to be cache-coherent on SMP, except on + * Freescale e500mc derivatives where it's also needed for coherent DMA. + */ +#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC) +#define MAS2_M_IF_NEEDED MAS2_M +#else +#define MAS2_M_IF_NEEDED 0 +#endif + +#ifndef __ASSEMBLY__ +#include <asm/bug.h> + +extern unsigned int tlbcam_index; + +typedef struct { + unsigned int id; + unsigned int active; + unsigned long vdso_base; +} mm_context_t; + +/* Page size definitions, common between 32 and 64-bit + * + * shift : is the "PAGE_SHIFT" value for that page size + * penc : is the pte encoding mask + * + */ +struct mmu_psize_def +{ + unsigned int shift; /* number of bits */ + unsigned int enc; /* PTE encoding */ + unsigned int ind; /* Corresponding indirect page size shift */ + unsigned int flags; +#define MMU_PAGE_SIZE_DIRECT 0x1 /* Supported as a direct size */ +#define MMU_PAGE_SIZE_INDIRECT 0x2 /* Supported as an indirect size */ +}; +extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; + +static inline int shift_to_mmu_psize(unsigned int shift) +{ + int psize; + + for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) + if (mmu_psize_defs[psize].shift == shift) + return psize; + return -1; +} + +static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize) +{ + if (mmu_psize_defs[mmu_psize].shift) + return mmu_psize_defs[mmu_psize].shift; + BUG(); +} + +/* The page sizes use the same names as 64-bit hash but are + * constants + */ +#if defined(CONFIG_PPC_4K_PAGES) +#define mmu_virtual_psize MMU_PAGE_4K +#else +#error Unsupported page size +#endif + +extern int mmu_linear_psize; +extern int mmu_vmemmap_psize; + +struct tlb_core_data { + /* + * Per-core spinlock for e6500 TLB handlers (no tlbsrx.) + * Must be the first struct element. + */ + u8 lock; + + /* For software way selection, as on Freescale TLB1 */ + u8 esel_next, esel_max, esel_first; +}; + +#ifdef CONFIG_PPC64 +extern unsigned long linear_map_top; +extern int book3e_htw_mode; + +#define PPC_HTW_NONE 0 +#define PPC_HTW_IBM 1 +#define PPC_HTW_E6500 2 + +/* + * 64-bit booke platforms don't load the tlb in the tlb miss handler code. + * HUGETLB_NEED_PRELOAD handles this - it causes huge_ptep_set_access_flags to + * return 1, indicating that the tlb requires preloading. + */ +#define HUGETLB_NEED_PRELOAD + +#define mmu_cleanup_all NULL + +#define MAX_PHYSMEM_BITS 44 + +#endif + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_MMU_BOOK3E_H_ */ diff --git a/arch/powerpc/include/asm/nohash/mmu.h b/arch/powerpc/include/asm/nohash/mmu.h new file mode 100644 index 000000000..edc793e5f --- /dev/null +++ b/arch/powerpc/include/asm/nohash/mmu.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_NOHASH_MMU_H_ +#define _ASM_POWERPC_NOHASH_MMU_H_ + +#if defined(CONFIG_40x) +/* 40x-style software loaded TLB */ +#include <asm/nohash/32/mmu-40x.h> +#elif defined(CONFIG_44x) +/* 44x-style software loaded TLB */ +#include <asm/nohash/32/mmu-44x.h> +#elif defined(CONFIG_PPC_BOOK3E_MMU) +/* Freescale Book-E software loaded TLB or Book-3e (ISA 2.06+) MMU */ +#include <asm/nohash/mmu-book3e.h> +#elif defined (CONFIG_PPC_8xx) +/* Motorola/Freescale 8xx software loaded TLB */ +#include <asm/nohash/32/mmu-8xx.h> +#endif + +#endif /* _ASM_POWERPC_NOHASH_MMU_H_ */ diff --git a/arch/powerpc/include/asm/nohash/pgalloc.h b/arch/powerpc/include/asm/nohash/pgalloc.h new file mode 100644 index 000000000..29c43665a --- /dev/null +++ b/arch/powerpc/include/asm/nohash/pgalloc.h @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_NOHASH_PGALLOC_H +#define _ASM_POWERPC_NOHASH_PGALLOC_H + +#include <linux/mm.h> +#include <linux/slab.h> + +extern void tlb_remove_table(struct mmu_gather *tlb, void *table); +#ifdef CONFIG_PPC64 +extern void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address); +#else +/* 44x etc which is BOOKE not BOOK3E */ +static inline void tlb_flush_pgtable(struct mmu_gather *tlb, + unsigned long address) +{ + +} +#endif /* !CONFIG_PPC_BOOK3E */ + +static inline pgd_t *pgd_alloc(struct mm_struct *mm) +{ + return kmem_cache_alloc(PGT_CACHE(PGD_INDEX_SIZE), + pgtable_gfp_flags(mm, GFP_KERNEL)); +} + +static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + kmem_cache_free(PGT_CACHE(PGD_INDEX_SIZE), pgd); +} + +#ifdef CONFIG_PPC64 +#include <asm/nohash/64/pgalloc.h> +#else +#include <asm/nohash/32/pgalloc.h> +#endif + +static inline void pgtable_free(void *table, int shift) +{ + if (!shift) { + pte_fragment_free((unsigned long *)table, 0); + } else { + BUG_ON(shift > MAX_PGTABLE_INDEX_SIZE); + kmem_cache_free(PGT_CACHE(shift), table); + } +} + +#define get_hugepd_cache_index(x) (x) + +static inline void pgtable_free_tlb(struct mmu_gather *tlb, void *table, int shift) +{ + unsigned long pgf = (unsigned long)table; + + BUG_ON(shift > MAX_PGTABLE_INDEX_SIZE); + pgf |= shift; + tlb_remove_table(tlb, (void *)pgf); +} + +static inline void __tlb_remove_table(void *_table) +{ + void *table = (void *)((unsigned long)_table & ~MAX_PGTABLE_INDEX_SIZE); + unsigned shift = (unsigned long)_table & MAX_PGTABLE_INDEX_SIZE; + + pgtable_free(table, shift); +} + +static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table, + unsigned long address) +{ + tlb_flush_pgtable(tlb, address); + pgtable_free_tlb(tlb, table, 0); +} +#endif /* _ASM_POWERPC_NOHASH_PGALLOC_H */ diff --git a/arch/powerpc/include/asm/nohash/pgtable.h b/arch/powerpc/include/asm/nohash/pgtable.h new file mode 100644 index 000000000..7ad1d1b04 --- /dev/null +++ b/arch/powerpc/include/asm/nohash/pgtable.h @@ -0,0 +1,305 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_NOHASH_PGTABLE_H +#define _ASM_POWERPC_NOHASH_PGTABLE_H + +#if defined(CONFIG_PPC64) +#include <asm/nohash/64/pgtable.h> +#else +#include <asm/nohash/32/pgtable.h> +#endif + +/* Permission masks used for kernel mappings */ +#define PAGE_KERNEL __pgprot(_PAGE_BASE | _PAGE_KERNEL_RW) +#define PAGE_KERNEL_NC __pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | _PAGE_NO_CACHE) +#define PAGE_KERNEL_NCG __pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | \ + _PAGE_NO_CACHE | _PAGE_GUARDED) +#define PAGE_KERNEL_X __pgprot(_PAGE_BASE | _PAGE_KERNEL_RWX) +#define PAGE_KERNEL_RO __pgprot(_PAGE_BASE | _PAGE_KERNEL_RO) +#define PAGE_KERNEL_ROX __pgprot(_PAGE_BASE | _PAGE_KERNEL_ROX) + +/* + * Protection used for kernel text. We want the debuggers to be able to + * set breakpoints anywhere, so don't write protect the kernel text + * on platforms where such control is possible. + */ +#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\ + defined(CONFIG_KPROBES) || defined(CONFIG_DYNAMIC_FTRACE) +#define PAGE_KERNEL_TEXT PAGE_KERNEL_X +#else +#define PAGE_KERNEL_TEXT PAGE_KERNEL_ROX +#endif + +/* Make modules code happy. We don't set RO yet */ +#define PAGE_KERNEL_EXEC PAGE_KERNEL_X + +/* Advertise special mapping type for AGP */ +#define PAGE_AGP (PAGE_KERNEL_NC) +#define HAVE_PAGE_AGP + +#ifndef __ASSEMBLY__ + +/* Generic accessors to PTE bits */ +#ifndef pte_write +static inline int pte_write(pte_t pte) +{ + return pte_val(pte) & _PAGE_RW; +} +#endif +#ifndef pte_read +static inline int pte_read(pte_t pte) { return 1; } +#endif +static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } +static inline int pte_special(pte_t pte) { return pte_val(pte) & _PAGE_SPECIAL; } +static inline int pte_none(pte_t pte) { return (pte_val(pte) & ~_PTE_NONE_MASK) == 0; } +static inline bool pte_hashpte(pte_t pte) { return false; } +static inline bool pte_ci(pte_t pte) { return pte_val(pte) & _PAGE_NO_CACHE; } +static inline bool pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_EXEC; } + +#ifdef CONFIG_NUMA_BALANCING +/* + * These work without NUMA balancing but the kernel does not care. See the + * comment in include/linux/pgtable.h . On powerpc, this will only + * work for user pages and always return true for kernel pages. + */ +static inline int pte_protnone(pte_t pte) +{ + return pte_present(pte) && !pte_user(pte); +} + +static inline int pmd_protnone(pmd_t pmd) +{ + return pte_protnone(pmd_pte(pmd)); +} +#endif /* CONFIG_NUMA_BALANCING */ + +static inline int pte_present(pte_t pte) +{ + return pte_val(pte) & _PAGE_PRESENT; +} + +static inline bool pte_hw_valid(pte_t pte) +{ + return pte_val(pte) & _PAGE_PRESENT; +} + +/* + * Don't just check for any non zero bits in __PAGE_USER, since for book3e + * and PTE_64BIT, PAGE_KERNEL_X contains _PAGE_BAP_SR which is also in + * _PAGE_USER. Need to explicitly match _PAGE_BAP_UR bit in that case too. + */ +#ifndef pte_user +static inline bool pte_user(pte_t pte) +{ + return (pte_val(pte) & _PAGE_USER) == _PAGE_USER; +} +#endif + +/* + * We only find page table entry in the last level + * Hence no need for other accessors + */ +#define pte_access_permitted pte_access_permitted +static inline bool pte_access_permitted(pte_t pte, bool write) +{ + /* + * A read-only access is controlled by _PAGE_USER bit. + * We have _PAGE_READ set for WRITE and EXECUTE + */ + if (!pte_present(pte) || !pte_user(pte) || !pte_read(pte)) + return false; + + if (write && !pte_write(pte)) + return false; + + return true; +} + +/* Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + * + * Even if PTEs can be unsigned long long, a PFN is always an unsigned + * long for now. + */ +static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot) { + return __pte(((pte_basic_t)(pfn) << PTE_RPN_SHIFT) | + pgprot_val(pgprot)); } +static inline unsigned long pte_pfn(pte_t pte) { + return pte_val(pte) >> PTE_RPN_SHIFT; } + +/* Generic modifiers for PTE bits */ +static inline pte_t pte_exprotect(pte_t pte) +{ + return __pte(pte_val(pte) & ~_PAGE_EXEC); +} + +static inline pte_t pte_mkclean(pte_t pte) +{ + return __pte(pte_val(pte) & ~_PAGE_DIRTY); +} + +static inline pte_t pte_mkold(pte_t pte) +{ + return __pte(pte_val(pte) & ~_PAGE_ACCESSED); +} + +static inline pte_t pte_mkspecial(pte_t pte) +{ + return __pte(pte_val(pte) | _PAGE_SPECIAL); +} + +#ifndef pte_mkhuge +static inline pte_t pte_mkhuge(pte_t pte) +{ + return __pte(pte_val(pte)); +} +#endif + +#ifndef pte_mkprivileged +static inline pte_t pte_mkprivileged(pte_t pte) +{ + return __pte(pte_val(pte) & ~_PAGE_USER); +} +#endif + +#ifndef pte_mkuser +static inline pte_t pte_mkuser(pte_t pte) +{ + return __pte(pte_val(pte) | _PAGE_USER); +} +#endif + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot)); +} + +/* Insert a PTE, top-level function is out of line. It uses an inline + * low level function in the respective pgtable-* files + */ +extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, + pte_t pte); + +/* This low level function performs the actual PTE insertion + * Setting the PTE depends on the MMU type and other factors. It's + * an horrible mess that I'm not going to try to clean up now but + * I'm keeping it in one place rather than spread around + */ +static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte, int percpu) +{ + /* Second case is 32-bit with 64-bit PTE. In this case, we + * can just store as long as we do the two halves in the right order + * with a barrier in between. + * In the percpu case, we also fallback to the simple update + */ + if (IS_ENABLED(CONFIG_PPC32) && IS_ENABLED(CONFIG_PTE_64BIT) && !percpu) { + __asm__ __volatile__("\ + stw%X0 %2,%0\n\ + eieio\n\ + stw%X1 %L2,%1" + : "=m" (*ptep), "=m" (*((unsigned char *)ptep+4)) + : "r" (pte) : "memory"); + return; + } + /* Anything else just stores the PTE normally. That covers all 64-bit + * cases, and 32-bit non-hash with 32-bit PTEs. + */ +#if defined(CONFIG_PPC_8xx) && defined(CONFIG_PPC_16K_PAGES) + ptep->pte = ptep->pte1 = ptep->pte2 = ptep->pte3 = pte_val(pte); +#else + *ptep = pte; +#endif + + /* + * With hardware tablewalk, a sync is needed to ensure that + * subsequent accesses see the PTE we just wrote. Unlike userspace + * mappings, we can't tolerate spurious faults, so make sure + * the new PTE will be seen the first time. + */ + if (IS_ENABLED(CONFIG_PPC_BOOK3E_64) && is_kernel_addr(addr)) + mb(); +} + + +#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS +extern int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address, + pte_t *ptep, pte_t entry, int dirty); + +/* + * Macro to mark a page protection value as "uncacheable". + */ + +#define _PAGE_CACHE_CTL (_PAGE_COHERENT | _PAGE_GUARDED | _PAGE_NO_CACHE | \ + _PAGE_WRITETHRU) + +#define pgprot_noncached(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \ + _PAGE_NO_CACHE | _PAGE_GUARDED)) + +#define pgprot_noncached_wc(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \ + _PAGE_NO_CACHE)) + +#define pgprot_cached(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \ + _PAGE_COHERENT)) + +#if _PAGE_WRITETHRU != 0 +#define pgprot_cached_wthru(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \ + _PAGE_COHERENT | _PAGE_WRITETHRU)) +#else +#define pgprot_cached_wthru(prot) pgprot_noncached(prot) +#endif + +#define pgprot_cached_noncoherent(prot) \ + (__pgprot(pgprot_val(prot) & ~_PAGE_CACHE_CTL)) + +#define pgprot_writecombine pgprot_noncached_wc + +struct file; +extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, + unsigned long size, pgprot_t vma_prot); +#define __HAVE_PHYS_MEM_ACCESS_PROT + +#ifdef CONFIG_HUGETLB_PAGE +static inline int hugepd_ok(hugepd_t hpd) +{ +#ifdef CONFIG_PPC_8xx + return ((hpd_val(hpd) & _PMD_PAGE_MASK) == _PMD_PAGE_8M); +#else + /* We clear the top bit to indicate hugepd */ + return (hpd_val(hpd) && (hpd_val(hpd) & PD_HUGE) == 0); +#endif +} + +static inline int pmd_huge(pmd_t pmd) +{ + return 0; +} + +static inline int pud_huge(pud_t pud) +{ + return 0; +} + +static inline int pgd_huge(pgd_t pgd) +{ + return 0; +} +#define pgd_huge pgd_huge + +#define is_hugepd(hpd) (hugepd_ok(hpd)) +#endif + +/* + * This gets called at the end of handling a page fault, when + * the kernel has put a new PTE into the page table for the process. + * We use it to ensure coherency between the i-cache and d-cache + * for the page which has just been mapped in. + */ +#if defined(CONFIG_PPC_FSL_BOOK3E) && defined(CONFIG_HUGETLB_PAGE) +void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep); +#else +static inline +void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep) {} +#endif + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/powerpc/include/asm/nohash/pte-book3e.h b/arch/powerpc/include/asm/nohash/pte-book3e.h new file mode 100644 index 000000000..813918f40 --- /dev/null +++ b/arch/powerpc/include/asm/nohash/pte-book3e.h @@ -0,0 +1,119 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_NOHASH_PTE_BOOK3E_H +#define _ASM_POWERPC_NOHASH_PTE_BOOK3E_H +#ifdef __KERNEL__ + +/* PTE bit definitions for processors compliant to the Book3E + * architecture 2.06 or later. The position of the PTE bits + * matches the HW definition of the optional Embedded Page Table + * category. + */ + +/* Architected bits */ +#define _PAGE_PRESENT 0x000001 /* software: pte contains a translation */ +#define _PAGE_SW1 0x000002 +#define _PAGE_BIT_SWAP_TYPE 2 +#define _PAGE_BAP_SR 0x000004 +#define _PAGE_BAP_UR 0x000008 +#define _PAGE_BAP_SW 0x000010 +#define _PAGE_BAP_UW 0x000020 +#define _PAGE_BAP_SX 0x000040 +#define _PAGE_BAP_UX 0x000080 +#define _PAGE_PSIZE_MSK 0x000f00 +#define _PAGE_PSIZE_4K 0x000200 +#define _PAGE_PSIZE_8K 0x000300 +#define _PAGE_PSIZE_16K 0x000400 +#define _PAGE_PSIZE_32K 0x000500 +#define _PAGE_PSIZE_64K 0x000600 +#define _PAGE_PSIZE_128K 0x000700 +#define _PAGE_PSIZE_256K 0x000800 +#define _PAGE_PSIZE_512K 0x000900 +#define _PAGE_PSIZE_1M 0x000a00 +#define _PAGE_PSIZE_2M 0x000b00 +#define _PAGE_PSIZE_4M 0x000c00 +#define _PAGE_PSIZE_8M 0x000d00 +#define _PAGE_PSIZE_16M 0x000e00 +#define _PAGE_PSIZE_32M 0x000f00 +#define _PAGE_DIRTY 0x001000 /* C: page changed */ +#define _PAGE_SW0 0x002000 +#define _PAGE_U3 0x004000 +#define _PAGE_U2 0x008000 +#define _PAGE_U1 0x010000 +#define _PAGE_U0 0x020000 +#define _PAGE_ACCESSED 0x040000 +#define _PAGE_ENDIAN 0x080000 +#define _PAGE_GUARDED 0x100000 +#define _PAGE_COHERENT 0x200000 /* M: enforce memory coherence */ +#define _PAGE_NO_CACHE 0x400000 /* I: cache inhibit */ +#define _PAGE_WRITETHRU 0x800000 /* W: cache write-through */ + +/* "Higher level" linux bit combinations */ +#define _PAGE_EXEC _PAGE_BAP_UX /* .. and was cache cleaned */ +#define _PAGE_RW (_PAGE_BAP_SW | _PAGE_BAP_UW) /* User write permission */ +#define _PAGE_KERNEL_RW (_PAGE_BAP_SW | _PAGE_BAP_SR | _PAGE_DIRTY) +#define _PAGE_KERNEL_RO (_PAGE_BAP_SR) +#define _PAGE_KERNEL_RWX (_PAGE_BAP_SW | _PAGE_BAP_SR | _PAGE_DIRTY | _PAGE_BAP_SX) +#define _PAGE_KERNEL_ROX (_PAGE_BAP_SR | _PAGE_BAP_SX) +#define _PAGE_USER (_PAGE_BAP_UR | _PAGE_BAP_SR) /* Can be read */ +#define _PAGE_PRIVILEGED (_PAGE_BAP_SR) + +#define _PAGE_SPECIAL _PAGE_SW0 + +/* Base page size */ +#define _PAGE_PSIZE _PAGE_PSIZE_4K +#define PTE_RPN_SHIFT (24) + +#define PTE_WIMGE_SHIFT (19) +#define PTE_BAP_SHIFT (2) + +/* On 32-bit, we never clear the top part of the PTE */ +#ifdef CONFIG_PPC32 +#define _PTE_NONE_MASK 0xffffffff00000000ULL +#define _PMD_PRESENT 0 +#define _PMD_PRESENT_MASK (PAGE_MASK) +#define _PMD_BAD (~PAGE_MASK) +#define _PMD_USER 0 +#else +#define _PTE_NONE_MASK 0 +#endif + +/* + * We define 2 sets of base prot bits, one for basic pages (ie, + * cacheable kernel and user pages) and one for non cacheable + * pages. We always set _PAGE_COHERENT when SMP is enabled or + * the processor might need it for DMA coherency. + */ +#define _PAGE_BASE_NC (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_PSIZE) +#if defined(CONFIG_SMP) +#define _PAGE_BASE (_PAGE_BASE_NC | _PAGE_COHERENT) +#else +#define _PAGE_BASE (_PAGE_BASE_NC) +#endif + +/* Permission masks used to generate the __P and __S table */ +#define PAGE_NONE __pgprot(_PAGE_BASE) +#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW) +#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC) +#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER) +#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) +#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER) +#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) + +#ifndef __ASSEMBLY__ +static inline pte_t pte_mkprivileged(pte_t pte) +{ + return __pte((pte_val(pte) & ~_PAGE_USER) | _PAGE_PRIVILEGED); +} + +#define pte_mkprivileged pte_mkprivileged + +static inline pte_t pte_mkuser(pte_t pte) +{ + return __pte((pte_val(pte) & ~_PAGE_PRIVILEGED) | _PAGE_USER); +} + +#define pte_mkuser pte_mkuser +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_NOHASH_PTE_BOOK3E_H */ diff --git a/arch/powerpc/include/asm/nohash/tlbflush.h b/arch/powerpc/include/asm/nohash/tlbflush.h new file mode 100644 index 000000000..b1d8fec29 --- /dev/null +++ b/arch/powerpc/include/asm/nohash/tlbflush.h @@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_NOHASH_TLBFLUSH_H +#define _ASM_POWERPC_NOHASH_TLBFLUSH_H + +/* + * TLB flushing: + * + * - flush_tlb_mm(mm) flushes the specified mm context TLB's + * - flush_tlb_page(vma, vmaddr) flushes one page + * - local_flush_tlb_mm(mm, full) flushes the specified mm context on + * the local processor + * - local_flush_tlb_page(vma, vmaddr) flushes one page on the local processor + * - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB + * - flush_tlb_range(vma, start, end) flushes a range of pages + * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages + * + */ + +/* + * TLB flushing for software loaded TLB chips + * + * TODO: (CONFIG_FSL_BOOKE) determine if flush_tlb_range & + * flush_tlb_kernel_range are best implemented as tlbia vs + * specific tlbie's + */ + +struct vm_area_struct; +struct mm_struct; + +#define MMU_NO_CONTEXT ((unsigned int)-1) + +extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); + +extern void local_flush_tlb_mm(struct mm_struct *mm); +extern void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); + +extern void __local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr, + int tsize, int ind); + +#ifdef CONFIG_SMP +extern void flush_tlb_mm(struct mm_struct *mm); +extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr); +extern void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr, + int tsize, int ind); +#else +#define flush_tlb_mm(mm) local_flush_tlb_mm(mm) +#define flush_tlb_page(vma,addr) local_flush_tlb_page(vma,addr) +#define __flush_tlb_page(mm,addr,p,i) __local_flush_tlb_page(mm,addr,p,i) +#endif + +#endif /* _ASM_POWERPC_NOHASH_TLBFLUSH_H */ diff --git a/arch/powerpc/include/asm/nvram.h b/arch/powerpc/include/asm/nvram.h new file mode 100644 index 000000000..eda7fac35 --- /dev/null +++ b/arch/powerpc/include/asm/nvram.h @@ -0,0 +1,94 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * NVRAM definitions and access functions. + */ +#ifndef _ASM_POWERPC_NVRAM_H +#define _ASM_POWERPC_NVRAM_H + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <uapi/asm/nvram.h> + +/* + * Set oops header version to distinguish between old and new format header. + * lnx,oops-log partition max size is 4000, header version > 4000 will + * help in identifying new header. + */ +#define OOPS_HDR_VERSION 5000 + +struct err_log_info { + __be32 error_type; + __be32 seq_num; +}; + +struct nvram_os_partition { + const char *name; + int req_size; /* desired size, in bytes */ + int min_size; /* minimum acceptable size (0 means req_size) */ + long size; /* size of data portion (excluding err_log_info) */ + long index; /* offset of data portion of partition */ + bool os_partition; /* partition initialized by OS, not FW */ +}; + +struct oops_log_info { + __be16 version; + __be16 report_length; + __be64 timestamp; +} __attribute__((packed)); + +extern struct nvram_os_partition oops_log_partition; + +#ifdef CONFIG_PPC_PSERIES +extern struct nvram_os_partition rtas_log_partition; + +extern int nvram_write_error_log(char * buff, int length, + unsigned int err_type, unsigned int err_seq); +extern int nvram_read_error_log(char * buff, int length, + unsigned int * err_type, unsigned int *err_seq); +extern int nvram_clear_error_log(void); +extern int pSeries_nvram_init(void); +#endif /* CONFIG_PPC_PSERIES */ + +#ifdef CONFIG_MMIO_NVRAM +extern int mmio_nvram_init(void); +#else +static inline int mmio_nvram_init(void) +{ + return -ENODEV; +} +#endif + +extern int __init nvram_scan_partitions(void); +extern loff_t nvram_create_partition(const char *name, int sig, + int req_size, int min_size); +extern int nvram_remove_partition(const char *name, int sig, + const char *exceptions[]); +extern int nvram_get_partition_size(loff_t data_index); +extern loff_t nvram_find_partition(const char *name, int sig, int *out_size); + +/* Return partition offset in nvram */ +extern int pmac_get_partition(int partition); + +/* Direct access to XPRAM on PowerMacs */ +extern u8 pmac_xpram_read(int xpaddr); +extern void pmac_xpram_write(int xpaddr, u8 data); + +/* Initialize NVRAM OS partition */ +extern int __init nvram_init_os_partition(struct nvram_os_partition *part); + +/* Initialize NVRAM oops partition */ +extern void __init nvram_init_oops_partition(int rtas_partition_exists); + +/* Read a NVRAM partition */ +extern int nvram_read_partition(struct nvram_os_partition *part, char *buff, + int length, unsigned int *err_type, + unsigned int *error_log_cnt); + +/* Write to NVRAM OS partition */ +extern int nvram_write_os_partition(struct nvram_os_partition *part, + char *buff, int length, + unsigned int err_type, + unsigned int error_log_cnt); + +#endif /* _ASM_POWERPC_NVRAM_H */ diff --git a/arch/powerpc/include/asm/ohare.h b/arch/powerpc/include/asm/ohare.h new file mode 100644 index 000000000..da3371fc3 --- /dev/null +++ b/arch/powerpc/include/asm/ohare.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_OHARE_H +#define _ASM_POWERPC_OHARE_H +#ifdef __KERNEL__ +/* + * ohare.h: definitions for using the "O'Hare" I/O controller chip. + * + * Copyright (C) 1997 Paul Mackerras. + * + * BenH: Changed to match those of heathrow (but not all of them). Please + * check if I didn't break anything (especially the media bay). + */ + +/* offset from ohare base for feature control register */ +#define OHARE_MBCR 0x34 +#define OHARE_FCR 0x38 + +/* + * Bits in feature control register. + * These were mostly derived by experiment on a powerbook 3400 + * and may differ for other machines. + */ +#define OH_SCC_RESET 1 +#define OH_BAY_POWER_N 2 /* a guess */ +#define OH_BAY_PCI_ENABLE 4 /* a guess */ +#define OH_BAY_IDE_ENABLE 8 +#define OH_BAY_FLOPPY_ENABLE 0x10 +#define OH_IDE0_ENABLE 0x20 +#define OH_IDE0_RESET_N 0x40 /* a guess */ +#define OH_BAY_DEV_MASK 0x1c +#define OH_BAY_RESET_N 0x80 +#define OH_IOBUS_ENABLE 0x100 /* IOBUS seems to be IDE */ +#define OH_SCC_ENABLE 0x200 +#define OH_MESH_ENABLE 0x400 +#define OH_FLOPPY_ENABLE 0x800 +#define OH_SCCA_IO 0x4000 +#define OH_SCCB_IO 0x8000 +#define OH_VIA_ENABLE 0x10000 /* Is apparently wrong, to be verified */ +#define OH_IDE1_RESET_N 0x800000 + +/* + * Bits to set in the feature control register on PowerBooks. + */ +#define PBOOK_FEATURES (OH_IDE_ENABLE | OH_SCC_ENABLE | \ + OH_MESH_ENABLE | OH_SCCA_IO | OH_SCCB_IO) + +/* + * A magic value to put into the feature control register of the + * "ohare" I/O controller on Starmaxes to enable the IDE CD interface. + * Contributed by Harry Eaton. + */ +#define STARMAX_FEATURES 0xbeff7a + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_OHARE_H */ diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h new file mode 100644 index 000000000..1dffa3cb1 --- /dev/null +++ b/arch/powerpc/include/asm/opal-api.h @@ -0,0 +1,1187 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * OPAL API definitions. + * + * Copyright 2011-2015 IBM Corp. + */ + +#ifndef __OPAL_API_H +#define __OPAL_API_H + +/****** OPAL APIs ******/ + +/* Return codes */ +#define OPAL_SUCCESS 0 +#define OPAL_PARAMETER -1 +#define OPAL_BUSY -2 +#define OPAL_PARTIAL -3 +#define OPAL_CONSTRAINED -4 +#define OPAL_CLOSED -5 +#define OPAL_HARDWARE -6 +#define OPAL_UNSUPPORTED -7 +#define OPAL_PERMISSION -8 +#define OPAL_NO_MEM -9 +#define OPAL_RESOURCE -10 +#define OPAL_INTERNAL_ERROR -11 +#define OPAL_BUSY_EVENT -12 +#define OPAL_HARDWARE_FROZEN -13 +#define OPAL_WRONG_STATE -14 +#define OPAL_ASYNC_COMPLETION -15 +#define OPAL_EMPTY -16 +#define OPAL_I2C_TIMEOUT -17 +#define OPAL_I2C_INVALID_CMD -18 +#define OPAL_I2C_LBUS_PARITY -19 +#define OPAL_I2C_BKEND_OVERRUN -20 +#define OPAL_I2C_BKEND_ACCESS -21 +#define OPAL_I2C_ARBT_LOST -22 +#define OPAL_I2C_NACK_RCVD -23 +#define OPAL_I2C_STOP_ERR -24 +#define OPAL_XIVE_PROVISIONING -31 +#define OPAL_XIVE_FREE_ACTIVE -32 +#define OPAL_TIMEOUT -33 + +/* API Tokens (in r0) */ +#define OPAL_INVALID_CALL -1 +#define OPAL_TEST 0 +#define OPAL_CONSOLE_WRITE 1 +#define OPAL_CONSOLE_READ 2 +#define OPAL_RTC_READ 3 +#define OPAL_RTC_WRITE 4 +#define OPAL_CEC_POWER_DOWN 5 +#define OPAL_CEC_REBOOT 6 +#define OPAL_READ_NVRAM 7 +#define OPAL_WRITE_NVRAM 8 +#define OPAL_HANDLE_INTERRUPT 9 +#define OPAL_POLL_EVENTS 10 +#define OPAL_PCI_SET_HUB_TCE_MEMORY 11 +#define OPAL_PCI_SET_PHB_TCE_MEMORY 12 +#define OPAL_PCI_CONFIG_READ_BYTE 13 +#define OPAL_PCI_CONFIG_READ_HALF_WORD 14 +#define OPAL_PCI_CONFIG_READ_WORD 15 +#define OPAL_PCI_CONFIG_WRITE_BYTE 16 +#define OPAL_PCI_CONFIG_WRITE_HALF_WORD 17 +#define OPAL_PCI_CONFIG_WRITE_WORD 18 +#define OPAL_SET_XIVE 19 +#define OPAL_GET_XIVE 20 +#define OPAL_GET_COMPLETION_TOKEN_STATUS 21 /* obsolete */ +#define OPAL_REGISTER_OPAL_EXCEPTION_HANDLER 22 +#define OPAL_PCI_EEH_FREEZE_STATUS 23 +#define OPAL_PCI_SHPC 24 +#define OPAL_CONSOLE_WRITE_BUFFER_SPACE 25 +#define OPAL_PCI_EEH_FREEZE_CLEAR 26 +#define OPAL_PCI_PHB_MMIO_ENABLE 27 +#define OPAL_PCI_SET_PHB_MEM_WINDOW 28 +#define OPAL_PCI_MAP_PE_MMIO_WINDOW 29 +#define OPAL_PCI_SET_PHB_TABLE_MEMORY 30 +#define OPAL_PCI_SET_PE 31 +#define OPAL_PCI_SET_PELTV 32 +#define OPAL_PCI_SET_MVE 33 +#define OPAL_PCI_SET_MVE_ENABLE 34 +#define OPAL_PCI_GET_XIVE_REISSUE 35 +#define OPAL_PCI_SET_XIVE_REISSUE 36 +#define OPAL_PCI_SET_XIVE_PE 37 +#define OPAL_GET_XIVE_SOURCE 38 +#define OPAL_GET_MSI_32 39 +#define OPAL_GET_MSI_64 40 +#define OPAL_START_CPU 41 +#define OPAL_QUERY_CPU_STATUS 42 +#define OPAL_WRITE_OPPANEL 43 /* unimplemented */ +#define OPAL_PCI_MAP_PE_DMA_WINDOW 44 +#define OPAL_PCI_MAP_PE_DMA_WINDOW_REAL 45 +#define OPAL_PCI_RESET 49 +#define OPAL_PCI_GET_HUB_DIAG_DATA 50 +#define OPAL_PCI_GET_PHB_DIAG_DATA 51 +#define OPAL_PCI_FENCE_PHB 52 +#define OPAL_PCI_REINIT 53 +#define OPAL_PCI_MASK_PE_ERROR 54 +#define OPAL_SET_SLOT_LED_STATUS 55 +#define OPAL_GET_EPOW_STATUS 56 +#define OPAL_SET_SYSTEM_ATTENTION_LED 57 +#define OPAL_RESERVED1 58 +#define OPAL_RESERVED2 59 +#define OPAL_PCI_NEXT_ERROR 60 +#define OPAL_PCI_EEH_FREEZE_STATUS2 61 +#define OPAL_PCI_POLL 62 +#define OPAL_PCI_MSI_EOI 63 +#define OPAL_PCI_GET_PHB_DIAG_DATA2 64 +#define OPAL_XSCOM_READ 65 +#define OPAL_XSCOM_WRITE 66 +#define OPAL_LPC_READ 67 +#define OPAL_LPC_WRITE 68 +#define OPAL_RETURN_CPU 69 +#define OPAL_REINIT_CPUS 70 +#define OPAL_ELOG_READ 71 +#define OPAL_ELOG_WRITE 72 +#define OPAL_ELOG_ACK 73 +#define OPAL_ELOG_RESEND 74 +#define OPAL_ELOG_SIZE 75 +#define OPAL_FLASH_VALIDATE 76 +#define OPAL_FLASH_MANAGE 77 +#define OPAL_FLASH_UPDATE 78 +#define OPAL_RESYNC_TIMEBASE 79 +#define OPAL_CHECK_TOKEN 80 +#define OPAL_DUMP_INIT 81 +#define OPAL_DUMP_INFO 82 +#define OPAL_DUMP_READ 83 +#define OPAL_DUMP_ACK 84 +#define OPAL_GET_MSG 85 +#define OPAL_CHECK_ASYNC_COMPLETION 86 +#define OPAL_SYNC_HOST_REBOOT 87 +#define OPAL_SENSOR_READ 88 +#define OPAL_GET_PARAM 89 +#define OPAL_SET_PARAM 90 +#define OPAL_DUMP_RESEND 91 +#define OPAL_ELOG_SEND 92 /* Deprecated */ +#define OPAL_PCI_SET_PHB_CAPI_MODE 93 +#define OPAL_DUMP_INFO2 94 +#define OPAL_WRITE_OPPANEL_ASYNC 95 +#define OPAL_PCI_ERR_INJECT 96 +#define OPAL_PCI_EEH_FREEZE_SET 97 +#define OPAL_HANDLE_HMI 98 +#define OPAL_CONFIG_CPU_IDLE_STATE 99 +#define OPAL_SLW_SET_REG 100 +#define OPAL_REGISTER_DUMP_REGION 101 +#define OPAL_UNREGISTER_DUMP_REGION 102 +#define OPAL_WRITE_TPO 103 +#define OPAL_READ_TPO 104 +#define OPAL_GET_DPO_STATUS 105 +#define OPAL_OLD_I2C_REQUEST 106 /* Deprecated */ +#define OPAL_IPMI_SEND 107 +#define OPAL_IPMI_RECV 108 +#define OPAL_I2C_REQUEST 109 +#define OPAL_FLASH_READ 110 +#define OPAL_FLASH_WRITE 111 +#define OPAL_FLASH_ERASE 112 +#define OPAL_PRD_MSG 113 +#define OPAL_LEDS_GET_INDICATOR 114 +#define OPAL_LEDS_SET_INDICATOR 115 +#define OPAL_CEC_REBOOT2 116 +#define OPAL_CONSOLE_FLUSH 117 +#define OPAL_GET_DEVICE_TREE 118 +#define OPAL_PCI_GET_PRESENCE_STATE 119 +#define OPAL_PCI_GET_POWER_STATE 120 +#define OPAL_PCI_SET_POWER_STATE 121 +#define OPAL_INT_GET_XIRR 122 +#define OPAL_INT_SET_CPPR 123 +#define OPAL_INT_EOI 124 +#define OPAL_INT_SET_MFRR 125 +#define OPAL_PCI_TCE_KILL 126 +#define OPAL_NMMU_SET_PTCR 127 +#define OPAL_XIVE_RESET 128 +#define OPAL_XIVE_GET_IRQ_INFO 129 +#define OPAL_XIVE_GET_IRQ_CONFIG 130 +#define OPAL_XIVE_SET_IRQ_CONFIG 131 +#define OPAL_XIVE_GET_QUEUE_INFO 132 +#define OPAL_XIVE_SET_QUEUE_INFO 133 +#define OPAL_XIVE_DONATE_PAGE 134 +#define OPAL_XIVE_ALLOCATE_VP_BLOCK 135 +#define OPAL_XIVE_FREE_VP_BLOCK 136 +#define OPAL_XIVE_GET_VP_INFO 137 +#define OPAL_XIVE_SET_VP_INFO 138 +#define OPAL_XIVE_ALLOCATE_IRQ 139 +#define OPAL_XIVE_FREE_IRQ 140 +#define OPAL_XIVE_SYNC 141 +#define OPAL_XIVE_DUMP 142 +#define OPAL_XIVE_GET_QUEUE_STATE 143 +#define OPAL_XIVE_SET_QUEUE_STATE 144 +#define OPAL_SIGNAL_SYSTEM_RESET 145 +#define OPAL_NPU_INIT_CONTEXT 146 +#define OPAL_NPU_DESTROY_CONTEXT 147 +#define OPAL_NPU_MAP_LPAR 148 +#define OPAL_IMC_COUNTERS_INIT 149 +#define OPAL_IMC_COUNTERS_START 150 +#define OPAL_IMC_COUNTERS_STOP 151 +#define OPAL_GET_POWERCAP 152 +#define OPAL_SET_POWERCAP 153 +#define OPAL_GET_POWER_SHIFT_RATIO 154 +#define OPAL_SET_POWER_SHIFT_RATIO 155 +#define OPAL_SENSOR_GROUP_CLEAR 156 +#define OPAL_PCI_SET_P2P 157 +#define OPAL_QUIESCE 158 +#define OPAL_NPU_SPA_SETUP 159 +#define OPAL_NPU_SPA_CLEAR_CACHE 160 +#define OPAL_NPU_TL_SET 161 +#define OPAL_SENSOR_READ_U64 162 +#define OPAL_SENSOR_GROUP_ENABLE 163 +#define OPAL_PCI_GET_PBCQ_TUNNEL_BAR 164 +#define OPAL_PCI_SET_PBCQ_TUNNEL_BAR 165 +#define OPAL_HANDLE_HMI2 166 +#define OPAL_NX_COPROC_INIT 167 +#define OPAL_XIVE_GET_VP_STATE 170 +#define OPAL_MPIPL_UPDATE 173 +#define OPAL_MPIPL_REGISTER_TAG 174 +#define OPAL_MPIPL_QUERY_TAG 175 +#define OPAL_SECVAR_GET 176 +#define OPAL_SECVAR_GET_NEXT 177 +#define OPAL_SECVAR_ENQUEUE_UPDATE 178 +#define OPAL_LAST 178 + +#define QUIESCE_HOLD 1 /* Spin all calls at entry */ +#define QUIESCE_REJECT 2 /* Fail all calls with OPAL_BUSY */ +#define QUIESCE_LOCK_BREAK 3 /* Set to ignore locks. */ +#define QUIESCE_RESUME 4 /* Un-quiesce */ +#define QUIESCE_RESUME_FAST_REBOOT 5 /* Un-quiesce, fast reboot */ + +/* Device tree flags */ + +/* + * Flags set in power-mgmt nodes in device tree describing + * idle states that are supported in the platform. + */ + +#define OPAL_PM_TIMEBASE_STOP 0x00000002 +#define OPAL_PM_LOSE_HYP_CONTEXT 0x00002000 +#define OPAL_PM_LOSE_FULL_CONTEXT 0x00004000 +#define OPAL_PM_NAP_ENABLED 0x00010000 +#define OPAL_PM_SLEEP_ENABLED 0x00020000 +#define OPAL_PM_WINKLE_ENABLED 0x00040000 +#define OPAL_PM_SLEEP_ENABLED_ER1 0x00080000 /* with workaround */ +#define OPAL_PM_STOP_INST_FAST 0x00100000 +#define OPAL_PM_STOP_INST_DEEP 0x00200000 + +/* + * OPAL_CONFIG_CPU_IDLE_STATE parameters + */ +#define OPAL_CONFIG_IDLE_FASTSLEEP 1 +#define OPAL_CONFIG_IDLE_UNDO 0 +#define OPAL_CONFIG_IDLE_APPLY 1 + +#ifndef __ASSEMBLY__ + +/* Other enums */ +enum OpalFreezeState { + OPAL_EEH_STOPPED_NOT_FROZEN = 0, + OPAL_EEH_STOPPED_MMIO_FREEZE = 1, + OPAL_EEH_STOPPED_DMA_FREEZE = 2, + OPAL_EEH_STOPPED_MMIO_DMA_FREEZE = 3, + OPAL_EEH_STOPPED_RESET = 4, + OPAL_EEH_STOPPED_TEMP_UNAVAIL = 5, + OPAL_EEH_STOPPED_PERM_UNAVAIL = 6 +}; + +enum OpalEehFreezeActionToken { + OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO = 1, + OPAL_EEH_ACTION_CLEAR_FREEZE_DMA = 2, + OPAL_EEH_ACTION_CLEAR_FREEZE_ALL = 3, + + OPAL_EEH_ACTION_SET_FREEZE_MMIO = 1, + OPAL_EEH_ACTION_SET_FREEZE_DMA = 2, + OPAL_EEH_ACTION_SET_FREEZE_ALL = 3 +}; + +enum OpalPciStatusToken { + OPAL_EEH_NO_ERROR = 0, + OPAL_EEH_IOC_ERROR = 1, + OPAL_EEH_PHB_ERROR = 2, + OPAL_EEH_PE_ERROR = 3, + OPAL_EEH_PE_MMIO_ERROR = 4, + OPAL_EEH_PE_DMA_ERROR = 5 +}; + +enum OpalPciErrorSeverity { + OPAL_EEH_SEV_NO_ERROR = 0, + OPAL_EEH_SEV_IOC_DEAD = 1, + OPAL_EEH_SEV_PHB_DEAD = 2, + OPAL_EEH_SEV_PHB_FENCED = 3, + OPAL_EEH_SEV_PE_ER = 4, + OPAL_EEH_SEV_INF = 5 +}; + +enum OpalErrinjectType { + OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR = 0, + OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64 = 1, +}; + +enum OpalErrinjectFunc { + /* IOA bus specific errors */ + OPAL_ERR_INJECT_FUNC_IOA_LD_MEM_ADDR = 0, + OPAL_ERR_INJECT_FUNC_IOA_LD_MEM_DATA = 1, + OPAL_ERR_INJECT_FUNC_IOA_LD_IO_ADDR = 2, + OPAL_ERR_INJECT_FUNC_IOA_LD_IO_DATA = 3, + OPAL_ERR_INJECT_FUNC_IOA_LD_CFG_ADDR = 4, + OPAL_ERR_INJECT_FUNC_IOA_LD_CFG_DATA = 5, + OPAL_ERR_INJECT_FUNC_IOA_ST_MEM_ADDR = 6, + OPAL_ERR_INJECT_FUNC_IOA_ST_MEM_DATA = 7, + OPAL_ERR_INJECT_FUNC_IOA_ST_IO_ADDR = 8, + OPAL_ERR_INJECT_FUNC_IOA_ST_IO_DATA = 9, + OPAL_ERR_INJECT_FUNC_IOA_ST_CFG_ADDR = 10, + OPAL_ERR_INJECT_FUNC_IOA_ST_CFG_DATA = 11, + OPAL_ERR_INJECT_FUNC_IOA_DMA_RD_ADDR = 12, + OPAL_ERR_INJECT_FUNC_IOA_DMA_RD_DATA = 13, + OPAL_ERR_INJECT_FUNC_IOA_DMA_RD_MASTER = 14, + OPAL_ERR_INJECT_FUNC_IOA_DMA_RD_TARGET = 15, + OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_ADDR = 16, + OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_DATA = 17, + OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_MASTER = 18, + OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_TARGET = 19, +}; + +enum OpalMmioWindowType { + OPAL_M32_WINDOW_TYPE = 1, + OPAL_M64_WINDOW_TYPE = 2, + OPAL_IO_WINDOW_TYPE = 3 +}; + +enum OpalExceptionHandler { + OPAL_MACHINE_CHECK_HANDLER = 1, + OPAL_HYPERVISOR_MAINTENANCE_HANDLER = 2, + OPAL_SOFTPATCH_HANDLER = 3 +}; + +enum OpalPendingState { + OPAL_EVENT_OPAL_INTERNAL = 0x1, + OPAL_EVENT_NVRAM = 0x2, + OPAL_EVENT_RTC = 0x4, + OPAL_EVENT_CONSOLE_OUTPUT = 0x8, + OPAL_EVENT_CONSOLE_INPUT = 0x10, + OPAL_EVENT_ERROR_LOG_AVAIL = 0x20, + OPAL_EVENT_ERROR_LOG = 0x40, + OPAL_EVENT_EPOW = 0x80, + OPAL_EVENT_LED_STATUS = 0x100, + OPAL_EVENT_PCI_ERROR = 0x200, + OPAL_EVENT_DUMP_AVAIL = 0x400, + OPAL_EVENT_MSG_PENDING = 0x800, +}; + +enum OpalThreadStatus { + OPAL_THREAD_INACTIVE = 0x0, + OPAL_THREAD_STARTED = 0x1, + OPAL_THREAD_UNAVAILABLE = 0x2 /* opal-v3 */ +}; + +enum OpalPciBusCompare { + OpalPciBusAny = 0, /* Any bus number match */ + OpalPciBus3Bits = 2, /* Match top 3 bits of bus number */ + OpalPciBus4Bits = 3, /* Match top 4 bits of bus number */ + OpalPciBus5Bits = 4, /* Match top 5 bits of bus number */ + OpalPciBus6Bits = 5, /* Match top 6 bits of bus number */ + OpalPciBus7Bits = 6, /* Match top 7 bits of bus number */ + OpalPciBusAll = 7, /* Match bus number exactly */ +}; + +enum OpalDeviceCompare { + OPAL_IGNORE_RID_DEVICE_NUMBER = 0, + OPAL_COMPARE_RID_DEVICE_NUMBER = 1 +}; + +enum OpalFuncCompare { + OPAL_IGNORE_RID_FUNCTION_NUMBER = 0, + OPAL_COMPARE_RID_FUNCTION_NUMBER = 1 +}; + +enum OpalPeAction { + OPAL_UNMAP_PE = 0, + OPAL_MAP_PE = 1 +}; + +enum OpalPeltvAction { + OPAL_REMOVE_PE_FROM_DOMAIN = 0, + OPAL_ADD_PE_TO_DOMAIN = 1 +}; + +enum OpalMveEnableAction { + OPAL_DISABLE_MVE = 0, + OPAL_ENABLE_MVE = 1 +}; + +enum OpalM64Action { + OPAL_DISABLE_M64 = 0, + OPAL_ENABLE_M64_SPLIT = 1, + OPAL_ENABLE_M64_NON_SPLIT = 2 +}; + +enum OpalPciResetScope { + OPAL_RESET_PHB_COMPLETE = 1, + OPAL_RESET_PCI_LINK = 2, + OPAL_RESET_PHB_ERROR = 3, + OPAL_RESET_PCI_HOT = 4, + OPAL_RESET_PCI_FUNDAMENTAL = 5, + OPAL_RESET_PCI_IODA_TABLE = 6 +}; + +enum OpalPciReinitScope { + /* + * Note: we chose values that do not overlap + * OpalPciResetScope as OPAL v2 used the same + * enum for both + */ + OPAL_REINIT_PCI_DEV = 1000 +}; + +enum OpalPciResetState { + OPAL_DEASSERT_RESET = 0, + OPAL_ASSERT_RESET = 1 +}; + +enum OpalPciSlotPresence { + OPAL_PCI_SLOT_EMPTY = 0, + OPAL_PCI_SLOT_PRESENT = 1 +}; + +enum OpalPciSlotPower { + OPAL_PCI_SLOT_POWER_OFF = 0, + OPAL_PCI_SLOT_POWER_ON = 1, + OPAL_PCI_SLOT_OFFLINE = 2, + OPAL_PCI_SLOT_ONLINE = 3 +}; + +enum OpalSlotLedType { + OPAL_SLOT_LED_TYPE_ID = 0, /* IDENTIFY LED */ + OPAL_SLOT_LED_TYPE_FAULT = 1, /* FAULT LED */ + OPAL_SLOT_LED_TYPE_ATTN = 2, /* System Attention LED */ + OPAL_SLOT_LED_TYPE_MAX = 3 +}; + +enum OpalSlotLedState { + OPAL_SLOT_LED_STATE_OFF = 0, /* LED is OFF */ + OPAL_SLOT_LED_STATE_ON = 1 /* LED is ON */ +}; + +/* + * Address cycle types for LPC accesses. These also correspond + * to the content of the first cell of the "reg" property for + * device nodes on the LPC bus + */ +enum OpalLPCAddressType { + OPAL_LPC_MEM = 0, + OPAL_LPC_IO = 1, + OPAL_LPC_FW = 2, +}; + +enum opal_msg_type { + OPAL_MSG_ASYNC_COMP = 0, /* params[0] = token, params[1] = rc, + * additional params function-specific + */ + OPAL_MSG_MEM_ERR = 1, + OPAL_MSG_EPOW = 2, + OPAL_MSG_SHUTDOWN = 3, /* params[0] = 1 reboot, 0 shutdown */ + OPAL_MSG_HMI_EVT = 4, + OPAL_MSG_DPO = 5, + OPAL_MSG_PRD = 6, + OPAL_MSG_OCC = 7, + OPAL_MSG_PRD2 = 8, + OPAL_MSG_TYPE_MAX, +}; + +struct opal_msg { + __be32 msg_type; + __be32 reserved; + __be64 params[8]; +}; + +/* System parameter permission */ +enum OpalSysparamPerm { + OPAL_SYSPARAM_READ = 0x1, + OPAL_SYSPARAM_WRITE = 0x2, + OPAL_SYSPARAM_RW = (OPAL_SYSPARAM_READ | OPAL_SYSPARAM_WRITE), +}; + +enum { + OPAL_IPMI_MSG_FORMAT_VERSION_1 = 1, +}; + +struct opal_ipmi_msg { + uint8_t version; + uint8_t netfn; + uint8_t cmd; + uint8_t data[]; +}; + +/* FSP memory errors handling */ +enum OpalMemErr_Version { + OpalMemErr_V1 = 1, +}; + +enum OpalMemErrType { + OPAL_MEM_ERR_TYPE_RESILIENCE = 0, + OPAL_MEM_ERR_TYPE_DYN_DALLOC, +}; + +/* Memory Reilience error type */ +enum OpalMemErr_ResilErrType { + OPAL_MEM_RESILIENCE_CE = 0, + OPAL_MEM_RESILIENCE_UE, + OPAL_MEM_RESILIENCE_UE_SCRUB, +}; + +/* Dynamic Memory Deallocation type */ +enum OpalMemErr_DynErrType { + OPAL_MEM_DYNAMIC_DEALLOC = 0, +}; + +struct OpalMemoryErrorData { + enum OpalMemErr_Version version:8; /* 0x00 */ + enum OpalMemErrType type:8; /* 0x01 */ + __be16 flags; /* 0x02 */ + uint8_t reserved_1[4]; /* 0x04 */ + + union { + /* Memory Resilience corrected/uncorrected error info */ + struct { + enum OpalMemErr_ResilErrType resil_err_type:8; + uint8_t reserved_1[7]; + __be64 physical_address_start; + __be64 physical_address_end; + } resilience; + /* Dynamic memory deallocation error info */ + struct { + enum OpalMemErr_DynErrType dyn_err_type:8; + uint8_t reserved_1[7]; + __be64 physical_address_start; + __be64 physical_address_end; + } dyn_dealloc; + } u; +}; + +/* HMI interrupt event */ +enum OpalHMI_Version { + OpalHMIEvt_V1 = 1, + OpalHMIEvt_V2 = 2, +}; + +enum OpalHMI_Severity { + OpalHMI_SEV_NO_ERROR = 0, + OpalHMI_SEV_WARNING = 1, + OpalHMI_SEV_ERROR_SYNC = 2, + OpalHMI_SEV_FATAL = 3, +}; + +enum OpalHMI_Disposition { + OpalHMI_DISPOSITION_RECOVERED = 0, + OpalHMI_DISPOSITION_NOT_RECOVERED = 1, +}; + +enum OpalHMI_ErrType { + OpalHMI_ERROR_MALFUNC_ALERT = 0, + OpalHMI_ERROR_PROC_RECOV_DONE, + OpalHMI_ERROR_PROC_RECOV_DONE_AGAIN, + OpalHMI_ERROR_PROC_RECOV_MASKED, + OpalHMI_ERROR_TFAC, + OpalHMI_ERROR_TFMR_PARITY, + OpalHMI_ERROR_HA_OVERFLOW_WARN, + OpalHMI_ERROR_XSCOM_FAIL, + OpalHMI_ERROR_XSCOM_DONE, + OpalHMI_ERROR_SCOM_FIR, + OpalHMI_ERROR_DEBUG_TRIG_FIR, + OpalHMI_ERROR_HYP_RESOURCE, + OpalHMI_ERROR_CAPP_RECOVERY, +}; + +enum OpalHMI_XstopType { + CHECKSTOP_TYPE_UNKNOWN = 0, + CHECKSTOP_TYPE_CORE = 1, + CHECKSTOP_TYPE_NX = 2, + CHECKSTOP_TYPE_NPU = 3 +}; + +enum OpalHMI_CoreXstopReason { + CORE_CHECKSTOP_IFU_REGFILE = 0x00000001, + CORE_CHECKSTOP_IFU_LOGIC = 0x00000002, + CORE_CHECKSTOP_PC_DURING_RECOV = 0x00000004, + CORE_CHECKSTOP_ISU_REGFILE = 0x00000008, + CORE_CHECKSTOP_ISU_LOGIC = 0x00000010, + CORE_CHECKSTOP_FXU_LOGIC = 0x00000020, + CORE_CHECKSTOP_VSU_LOGIC = 0x00000040, + CORE_CHECKSTOP_PC_RECOV_IN_MAINT_MODE = 0x00000080, + CORE_CHECKSTOP_LSU_REGFILE = 0x00000100, + CORE_CHECKSTOP_PC_FWD_PROGRESS = 0x00000200, + CORE_CHECKSTOP_LSU_LOGIC = 0x00000400, + CORE_CHECKSTOP_PC_LOGIC = 0x00000800, + CORE_CHECKSTOP_PC_HYP_RESOURCE = 0x00001000, + CORE_CHECKSTOP_PC_HANG_RECOV_FAILED = 0x00002000, + CORE_CHECKSTOP_PC_AMBI_HANG_DETECTED = 0x00004000, + CORE_CHECKSTOP_PC_DEBUG_TRIG_ERR_INJ = 0x00008000, + CORE_CHECKSTOP_PC_SPRD_HYP_ERR_INJ = 0x00010000, +}; + +enum OpalHMI_NestAccelXstopReason { + NX_CHECKSTOP_SHM_INVAL_STATE_ERR = 0x00000001, + NX_CHECKSTOP_DMA_INVAL_STATE_ERR_1 = 0x00000002, + NX_CHECKSTOP_DMA_INVAL_STATE_ERR_2 = 0x00000004, + NX_CHECKSTOP_DMA_CH0_INVAL_STATE_ERR = 0x00000008, + NX_CHECKSTOP_DMA_CH1_INVAL_STATE_ERR = 0x00000010, + NX_CHECKSTOP_DMA_CH2_INVAL_STATE_ERR = 0x00000020, + NX_CHECKSTOP_DMA_CH3_INVAL_STATE_ERR = 0x00000040, + NX_CHECKSTOP_DMA_CH4_INVAL_STATE_ERR = 0x00000080, + NX_CHECKSTOP_DMA_CH5_INVAL_STATE_ERR = 0x00000100, + NX_CHECKSTOP_DMA_CH6_INVAL_STATE_ERR = 0x00000200, + NX_CHECKSTOP_DMA_CH7_INVAL_STATE_ERR = 0x00000400, + NX_CHECKSTOP_DMA_CRB_UE = 0x00000800, + NX_CHECKSTOP_DMA_CRB_SUE = 0x00001000, + NX_CHECKSTOP_PBI_ISN_UE = 0x00002000, +}; + +struct OpalHMIEvent { + uint8_t version; /* 0x00 */ + uint8_t severity; /* 0x01 */ + uint8_t type; /* 0x02 */ + uint8_t disposition; /* 0x03 */ + uint8_t reserved_1[4]; /* 0x04 */ + + __be64 hmer; + /* TFMR register. Valid only for TFAC and TFMR_PARITY error type. */ + __be64 tfmr; + + /* version 2 and later */ + union { + /* + * checkstop info (Core/NX). + * Valid for OpalHMI_ERROR_MALFUNC_ALERT. + */ + struct { + uint8_t xstop_type; /* enum OpalHMI_XstopType */ + uint8_t reserved_1[3]; + __be32 xstop_reason; + union { + __be32 pir; /* for CHECKSTOP_TYPE_CORE */ + __be32 chip_id; /* for CHECKSTOP_TYPE_NX */ + } u; + } xstop_error; + } u; +}; + +/* OPAL_HANDLE_HMI2 out_flags */ +enum { + OPAL_HMI_FLAGS_TB_RESYNC = (1ull << 0), /* Timebase has been resynced */ + OPAL_HMI_FLAGS_DEC_LOST = (1ull << 1), /* DEC lost, needs to be reprogrammed */ + OPAL_HMI_FLAGS_HDEC_LOST = (1ull << 2), /* HDEC lost, needs to be reprogrammed */ + OPAL_HMI_FLAGS_TOD_TB_FAIL = (1ull << 3), /* TOD/TB recovery failed. */ + OPAL_HMI_FLAGS_NEW_EVENT = (1ull << 63), /* An event has been created */ +}; + +enum { + OPAL_P7IOC_DIAG_TYPE_NONE = 0, + OPAL_P7IOC_DIAG_TYPE_RGC = 1, + OPAL_P7IOC_DIAG_TYPE_BI = 2, + OPAL_P7IOC_DIAG_TYPE_CI = 3, + OPAL_P7IOC_DIAG_TYPE_MISC = 4, + OPAL_P7IOC_DIAG_TYPE_I2C = 5, + OPAL_P7IOC_DIAG_TYPE_LAST = 6 +}; + +struct OpalIoP7IOCErrorData { + __be16 type; + + /* GEM */ + __be64 gemXfir; + __be64 gemRfir; + __be64 gemRirqfir; + __be64 gemMask; + __be64 gemRwof; + + /* LEM */ + __be64 lemFir; + __be64 lemErrMask; + __be64 lemAction0; + __be64 lemAction1; + __be64 lemWof; + + union { + struct OpalIoP7IOCRgcErrorData { + __be64 rgcStatus; /* 3E1C10 */ + __be64 rgcLdcp; /* 3E1C18 */ + }rgc; + struct OpalIoP7IOCBiErrorData { + __be64 biLdcp0; /* 3C0100, 3C0118 */ + __be64 biLdcp1; /* 3C0108, 3C0120 */ + __be64 biLdcp2; /* 3C0110, 3C0128 */ + __be64 biFenceStatus; /* 3C0130, 3C0130 */ + + uint8_t biDownbound; /* BI Downbound or Upbound */ + }bi; + struct OpalIoP7IOCCiErrorData { + __be64 ciPortStatus; /* 3Dn008 */ + __be64 ciPortLdcp; /* 3Dn010 */ + + uint8_t ciPort; /* Index of CI port: 0/1 */ + }ci; + }; +}; + +/** + * This structure defines the overlay which will be used to store PHB error + * data upon request. + */ +enum { + OPAL_PHB_ERROR_DATA_VERSION_1 = 1, +}; + +enum { + OPAL_PHB_ERROR_DATA_TYPE_P7IOC = 1, + OPAL_PHB_ERROR_DATA_TYPE_PHB3 = 2, + OPAL_PHB_ERROR_DATA_TYPE_PHB4 = 3 +}; + +enum { + OPAL_P7IOC_NUM_PEST_REGS = 128, + OPAL_PHB3_NUM_PEST_REGS = 256, + OPAL_PHB4_NUM_PEST_REGS = 512 +}; + +struct OpalIoPhbErrorCommon { + __be32 version; + __be32 ioType; + __be32 len; +}; + +struct OpalIoP7IOCPhbErrorData { + struct OpalIoPhbErrorCommon common; + + __be32 brdgCtl; + + // P7IOC utl regs + __be32 portStatusReg; + __be32 rootCmplxStatus; + __be32 busAgentStatus; + + // P7IOC cfg regs + __be32 deviceStatus; + __be32 slotStatus; + __be32 linkStatus; + __be32 devCmdStatus; + __be32 devSecStatus; + + // cfg AER regs + __be32 rootErrorStatus; + __be32 uncorrErrorStatus; + __be32 corrErrorStatus; + __be32 tlpHdr1; + __be32 tlpHdr2; + __be32 tlpHdr3; + __be32 tlpHdr4; + __be32 sourceId; + + __be32 rsv3; + + // Record data about the call to allocate a buffer. + __be64 errorClass; + __be64 correlator; + + //P7IOC MMIO Error Regs + __be64 p7iocPlssr; // n120 + __be64 p7iocCsr; // n110 + __be64 lemFir; // nC00 + __be64 lemErrorMask; // nC18 + __be64 lemWOF; // nC40 + __be64 phbErrorStatus; // nC80 + __be64 phbFirstErrorStatus; // nC88 + __be64 phbErrorLog0; // nCC0 + __be64 phbErrorLog1; // nCC8 + __be64 mmioErrorStatus; // nD00 + __be64 mmioFirstErrorStatus; // nD08 + __be64 mmioErrorLog0; // nD40 + __be64 mmioErrorLog1; // nD48 + __be64 dma0ErrorStatus; // nD80 + __be64 dma0FirstErrorStatus; // nD88 + __be64 dma0ErrorLog0; // nDC0 + __be64 dma0ErrorLog1; // nDC8 + __be64 dma1ErrorStatus; // nE00 + __be64 dma1FirstErrorStatus; // nE08 + __be64 dma1ErrorLog0; // nE40 + __be64 dma1ErrorLog1; // nE48 + __be64 pestA[OPAL_P7IOC_NUM_PEST_REGS]; + __be64 pestB[OPAL_P7IOC_NUM_PEST_REGS]; +}; + +struct OpalIoPhb3ErrorData { + struct OpalIoPhbErrorCommon common; + + __be32 brdgCtl; + + /* PHB3 UTL regs */ + __be32 portStatusReg; + __be32 rootCmplxStatus; + __be32 busAgentStatus; + + /* PHB3 cfg regs */ + __be32 deviceStatus; + __be32 slotStatus; + __be32 linkStatus; + __be32 devCmdStatus; + __be32 devSecStatus; + + /* cfg AER regs */ + __be32 rootErrorStatus; + __be32 uncorrErrorStatus; + __be32 corrErrorStatus; + __be32 tlpHdr1; + __be32 tlpHdr2; + __be32 tlpHdr3; + __be32 tlpHdr4; + __be32 sourceId; + + __be32 rsv3; + + /* Record data about the call to allocate a buffer */ + __be64 errorClass; + __be64 correlator; + + /* PHB3 MMIO Error Regs */ + __be64 nFir; /* 000 */ + __be64 nFirMask; /* 003 */ + __be64 nFirWOF; /* 008 */ + __be64 phbPlssr; /* 120 */ + __be64 phbCsr; /* 110 */ + __be64 lemFir; /* C00 */ + __be64 lemErrorMask; /* C18 */ + __be64 lemWOF; /* C40 */ + __be64 phbErrorStatus; /* C80 */ + __be64 phbFirstErrorStatus; /* C88 */ + __be64 phbErrorLog0; /* CC0 */ + __be64 phbErrorLog1; /* CC8 */ + __be64 mmioErrorStatus; /* D00 */ + __be64 mmioFirstErrorStatus; /* D08 */ + __be64 mmioErrorLog0; /* D40 */ + __be64 mmioErrorLog1; /* D48 */ + __be64 dma0ErrorStatus; /* D80 */ + __be64 dma0FirstErrorStatus; /* D88 */ + __be64 dma0ErrorLog0; /* DC0 */ + __be64 dma0ErrorLog1; /* DC8 */ + __be64 dma1ErrorStatus; /* E00 */ + __be64 dma1FirstErrorStatus; /* E08 */ + __be64 dma1ErrorLog0; /* E40 */ + __be64 dma1ErrorLog1; /* E48 */ + __be64 pestA[OPAL_PHB3_NUM_PEST_REGS]; + __be64 pestB[OPAL_PHB3_NUM_PEST_REGS]; +}; + +struct OpalIoPhb4ErrorData { + struct OpalIoPhbErrorCommon common; + + __be32 brdgCtl; + + /* PHB4 cfg regs */ + __be32 deviceStatus; + __be32 slotStatus; + __be32 linkStatus; + __be32 devCmdStatus; + __be32 devSecStatus; + + /* cfg AER regs */ + __be32 rootErrorStatus; + __be32 uncorrErrorStatus; + __be32 corrErrorStatus; + __be32 tlpHdr1; + __be32 tlpHdr2; + __be32 tlpHdr3; + __be32 tlpHdr4; + __be32 sourceId; + + /* PHB4 ETU Error Regs */ + __be64 nFir; /* 000 */ + __be64 nFirMask; /* 003 */ + __be64 nFirWOF; /* 008 */ + __be64 phbPlssr; /* 120 */ + __be64 phbCsr; /* 110 */ + __be64 lemFir; /* C00 */ + __be64 lemErrorMask; /* C18 */ + __be64 lemWOF; /* C40 */ + __be64 phbErrorStatus; /* C80 */ + __be64 phbFirstErrorStatus; /* C88 */ + __be64 phbErrorLog0; /* CC0 */ + __be64 phbErrorLog1; /* CC8 */ + __be64 phbTxeErrorStatus; /* D00 */ + __be64 phbTxeFirstErrorStatus; /* D08 */ + __be64 phbTxeErrorLog0; /* D40 */ + __be64 phbTxeErrorLog1; /* D48 */ + __be64 phbRxeArbErrorStatus; /* D80 */ + __be64 phbRxeArbFirstErrorStatus; /* D88 */ + __be64 phbRxeArbErrorLog0; /* DC0 */ + __be64 phbRxeArbErrorLog1; /* DC8 */ + __be64 phbRxeMrgErrorStatus; /* E00 */ + __be64 phbRxeMrgFirstErrorStatus; /* E08 */ + __be64 phbRxeMrgErrorLog0; /* E40 */ + __be64 phbRxeMrgErrorLog1; /* E48 */ + __be64 phbRxeTceErrorStatus; /* E80 */ + __be64 phbRxeTceFirstErrorStatus; /* E88 */ + __be64 phbRxeTceErrorLog0; /* EC0 */ + __be64 phbRxeTceErrorLog1; /* EC8 */ + + /* PHB4 REGB Error Regs */ + __be64 phbPblErrorStatus; /* 1900 */ + __be64 phbPblFirstErrorStatus; /* 1908 */ + __be64 phbPblErrorLog0; /* 1940 */ + __be64 phbPblErrorLog1; /* 1948 */ + __be64 phbPcieDlpErrorLog1; /* 1AA0 */ + __be64 phbPcieDlpErrorLog2; /* 1AA8 */ + __be64 phbPcieDlpErrorStatus; /* 1AB0 */ + __be64 phbRegbErrorStatus; /* 1C00 */ + __be64 phbRegbFirstErrorStatus; /* 1C08 */ + __be64 phbRegbErrorLog0; /* 1C40 */ + __be64 phbRegbErrorLog1; /* 1C48 */ + + __be64 pestA[OPAL_PHB4_NUM_PEST_REGS]; + __be64 pestB[OPAL_PHB4_NUM_PEST_REGS]; +}; + +enum { + OPAL_REINIT_CPUS_HILE_BE = (1 << 0), + OPAL_REINIT_CPUS_HILE_LE = (1 << 1), + + /* These two define the base MMU mode of the host on P9 + * + * On P9 Nimbus DD2.0 and Cumlus (and later), KVM can still + * create hash guests in "radix" mode with care (full core + * switch only). + */ + OPAL_REINIT_CPUS_MMU_HASH = (1 << 2), + OPAL_REINIT_CPUS_MMU_RADIX = (1 << 3), + + OPAL_REINIT_CPUS_TM_SUSPEND_DISABLED = (1 << 4), +}; + +typedef struct oppanel_line { + __be64 line; + __be64 line_len; +} oppanel_line_t; + +enum opal_prd_msg_type { + OPAL_PRD_MSG_TYPE_INIT = 0, /* HBRT --> OPAL */ + OPAL_PRD_MSG_TYPE_FINI, /* HBRT/kernel --> OPAL */ + OPAL_PRD_MSG_TYPE_ATTN, /* HBRT <-- OPAL */ + OPAL_PRD_MSG_TYPE_ATTN_ACK, /* HBRT --> OPAL */ + OPAL_PRD_MSG_TYPE_OCC_ERROR, /* HBRT <-- OPAL */ + OPAL_PRD_MSG_TYPE_OCC_RESET, /* HBRT <-- OPAL */ +}; + +struct opal_prd_msg_header { + uint8_t type; + uint8_t pad[1]; + __be16 size; +}; + +struct opal_prd_msg; + +#define OCC_RESET 0 +#define OCC_LOAD 1 +#define OCC_THROTTLE 2 +#define OCC_MAX_THROTTLE_STATUS 5 + +struct opal_occ_msg { + __be64 type; + __be64 chip; + __be64 throttle_status; +}; + +/* + * SG entries + * + * WARNING: The current implementation requires each entry + * to represent a block that is 4k aligned *and* each block + * size except the last one in the list to be as well. + */ +struct opal_sg_entry { + __be64 data; + __be64 length; +}; + +/* + * Candidate image SG list. + * + * length = VER | length + */ +struct opal_sg_list { + __be64 length; + __be64 next; + struct opal_sg_entry entry[]; +}; + +/* + * Dump region ID range usable by the OS + */ +#define OPAL_DUMP_REGION_HOST_START 0x80 +#define OPAL_DUMP_REGION_LOG_BUF 0x80 +#define OPAL_DUMP_REGION_HOST_END 0xFF + +/* CAPI modes for PHB */ +enum { + OPAL_PHB_CAPI_MODE_PCIE = 0, + OPAL_PHB_CAPI_MODE_CAPI = 1, + OPAL_PHB_CAPI_MODE_SNOOP_OFF = 2, + OPAL_PHB_CAPI_MODE_SNOOP_ON = 3, + OPAL_PHB_CAPI_MODE_DMA = 4, + OPAL_PHB_CAPI_MODE_DMA_TVT1 = 5, +}; + +/* OPAL I2C request */ +struct opal_i2c_request { + uint8_t type; +#define OPAL_I2C_RAW_READ 0 +#define OPAL_I2C_RAW_WRITE 1 +#define OPAL_I2C_SM_READ 2 +#define OPAL_I2C_SM_WRITE 3 + uint8_t flags; +#define OPAL_I2C_ADDR_10 0x01 /* Not supported yet */ + uint8_t subaddr_sz; /* Max 4 */ + uint8_t reserved; + __be16 addr; /* 7 or 10 bit address */ + __be16 reserved2; + __be32 subaddr; /* Sub-address if any */ + __be32 size; /* Data size */ + __be64 buffer_ra; /* Buffer real address */ +}; + +/* + * EPOW status sharing (OPAL and the host) + * + * The host will pass on OPAL, a buffer of length OPAL_SYSEPOW_MAX + * with individual elements being 16 bits wide to fetch the system + * wide EPOW status. Each element in the buffer will contain the + * EPOW status in it's bit representation for a particular EPOW sub + * class as defined here. So multiple detailed EPOW status bits + * specific for any sub class can be represented in a single buffer + * element as it's bit representation. + */ + +/* System EPOW type */ +enum OpalSysEpow { + OPAL_SYSEPOW_POWER = 0, /* Power EPOW */ + OPAL_SYSEPOW_TEMP = 1, /* Temperature EPOW */ + OPAL_SYSEPOW_COOLING = 2, /* Cooling EPOW */ + OPAL_SYSEPOW_MAX = 3, /* Max EPOW categories */ +}; + +/* Power EPOW */ +enum OpalSysPower { + OPAL_SYSPOWER_UPS = 0x0001, /* System on UPS power */ + OPAL_SYSPOWER_CHNG = 0x0002, /* System power config change */ + OPAL_SYSPOWER_FAIL = 0x0004, /* System impending power failure */ + OPAL_SYSPOWER_INCL = 0x0008, /* System incomplete power */ +}; + +/* Temperature EPOW */ +enum OpalSysTemp { + OPAL_SYSTEMP_AMB = 0x0001, /* System over ambient temperature */ + OPAL_SYSTEMP_INT = 0x0002, /* System over internal temperature */ + OPAL_SYSTEMP_HMD = 0x0004, /* System over ambient humidity */ +}; + +/* Cooling EPOW */ +enum OpalSysCooling { + OPAL_SYSCOOL_INSF = 0x0001, /* System insufficient cooling */ +}; + +/* Argument to OPAL_CEC_REBOOT2() */ +enum { + OPAL_REBOOT_NORMAL = 0, + OPAL_REBOOT_PLATFORM_ERROR = 1, + OPAL_REBOOT_FULL_IPL = 2, + OPAL_REBOOT_MPIPL = 3, + OPAL_REBOOT_FAST = 4, +}; + +/* Argument to OPAL_PCI_TCE_KILL */ +enum { + OPAL_PCI_TCE_KILL_PAGES, + OPAL_PCI_TCE_KILL_PE, + OPAL_PCI_TCE_KILL_ALL, +}; + +/* The xive operation mode indicates the active "API" and + * corresponds to the "mode" parameter of the opal_xive_reset() + * call + */ +enum { + OPAL_XIVE_MODE_EMU = 0, + OPAL_XIVE_MODE_EXPL = 1, +}; + +/* Flags for OPAL_XIVE_GET_IRQ_INFO */ +enum { + OPAL_XIVE_IRQ_TRIGGER_PAGE = 0x00000001, + OPAL_XIVE_IRQ_STORE_EOI = 0x00000002, + OPAL_XIVE_IRQ_LSI = 0x00000004, + OPAL_XIVE_IRQ_SHIFT_BUG = 0x00000008, + OPAL_XIVE_IRQ_MASK_VIA_FW = 0x00000010, + OPAL_XIVE_IRQ_EOI_VIA_FW = 0x00000020, +}; + +/* Flags for OPAL_XIVE_GET/SET_QUEUE_INFO */ +enum { + OPAL_XIVE_EQ_ENABLED = 0x00000001, + OPAL_XIVE_EQ_ALWAYS_NOTIFY = 0x00000002, + OPAL_XIVE_EQ_ESCALATE = 0x00000004, +}; + +/* Flags for OPAL_XIVE_GET/SET_VP_INFO */ +enum { + OPAL_XIVE_VP_ENABLED = 0x00000001, + OPAL_XIVE_VP_SINGLE_ESCALATION = 0x00000002, +}; + +/* "Any chip" replacement for chip ID for allocation functions */ +enum { + OPAL_XIVE_ANY_CHIP = 0xffffffff, +}; + +/* Xive sync options */ +enum { + /* This bits are cumulative, arg is a girq */ + XIVE_SYNC_EAS = 0x00000001, /* Sync irq source */ + XIVE_SYNC_QUEUE = 0x00000002, /* Sync irq target */ +}; + +/* Dump options */ +enum { + XIVE_DUMP_TM_HYP = 0, + XIVE_DUMP_TM_POOL = 1, + XIVE_DUMP_TM_OS = 2, + XIVE_DUMP_TM_USER = 3, + XIVE_DUMP_VP = 4, + XIVE_DUMP_EMU_STATE = 5, +}; + +/* "type" argument options for OPAL_IMC_COUNTERS_* calls */ +enum { + OPAL_IMC_COUNTERS_NEST = 1, + OPAL_IMC_COUNTERS_CORE = 2, + OPAL_IMC_COUNTERS_TRACE = 3, +}; + + +/* PCI p2p descriptor */ +#define OPAL_PCI_P2P_ENABLE 0x1 +#define OPAL_PCI_P2P_LOAD 0x2 +#define OPAL_PCI_P2P_STORE 0x4 + +/* MPIPL update operations */ +enum opal_mpipl_ops { + OPAL_MPIPL_ADD_RANGE = 0, + OPAL_MPIPL_REMOVE_RANGE = 1, + OPAL_MPIPL_REMOVE_ALL = 2, + OPAL_MPIPL_FREE_PRESERVED_MEMORY = 3, +}; + +/* Tag will point to various metadata area. Kernel will + * use tag to get metadata value. + */ +enum opal_mpipl_tags { + OPAL_MPIPL_TAG_CPU = 0, + OPAL_MPIPL_TAG_OPAL = 1, + OPAL_MPIPL_TAG_KERNEL = 2, + OPAL_MPIPL_TAG_BOOT_MEM = 3, +}; + +/* Preserved memory details */ +struct opal_mpipl_region { + __be64 src; + __be64 dest; + __be64 size; +}; + +/* Structure version */ +#define OPAL_MPIPL_VERSION 0x01 + +struct opal_mpipl_fadump { + u8 version; + u8 reserved[7]; + __be32 crashing_pir; /* OPAL crashing CPU PIR */ + __be32 cpu_data_version; + __be32 cpu_data_size; + __be32 region_cnt; + struct opal_mpipl_region region[]; +} __packed; + +#endif /* __ASSEMBLY__ */ + +#endif /* __OPAL_API_H */ diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h new file mode 100644 index 000000000..9986ac34b --- /dev/null +++ b/arch/powerpc/include/asm/opal.h @@ -0,0 +1,405 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * PowerNV OPAL definitions. + * + * Copyright 2011 IBM Corp. + */ + +#ifndef _ASM_POWERPC_OPAL_H +#define _ASM_POWERPC_OPAL_H + +#include <asm/opal-api.h> + +#ifndef __ASSEMBLY__ + +#include <linux/notifier.h> + +/* We calculate number of sg entries based on PAGE_SIZE */ +#define SG_ENTRIES_PER_NODE ((PAGE_SIZE - 16) / sizeof(struct opal_sg_entry)) + +/* Default time to sleep or delay between OPAL_BUSY/OPAL_BUSY_EVENT loops */ +#define OPAL_BUSY_DELAY_MS 10 + +/* /sys/firmware/opal */ +extern struct kobject *opal_kobj; + +/* /ibm,opal */ +extern struct device_node *opal_node; + +/* API functions */ +int64_t opal_invalid_call(void); +int64_t opal_npu_destroy_context(uint64_t phb_id, uint64_t pid, uint64_t bdf); +int64_t opal_npu_init_context(uint64_t phb_id, int pasid, uint64_t msr, + uint64_t bdf); +int64_t opal_npu_map_lpar(uint64_t phb_id, uint64_t bdf, uint64_t lparid, + uint64_t lpcr); +int64_t opal_npu_spa_setup(uint64_t phb_id, uint32_t bdfn, + uint64_t addr, uint64_t PE_mask); +int64_t opal_npu_spa_clear_cache(uint64_t phb_id, uint32_t bdfn, + uint64_t PE_handle); +int64_t opal_npu_tl_set(uint64_t phb_id, uint32_t bdfn, long cap, + uint64_t rate_phys, uint32_t size); + +int64_t opal_console_write(int64_t term_number, __be64 *length, + const uint8_t *buffer); +int64_t opal_console_read(int64_t term_number, __be64 *length, + uint8_t *buffer); +int64_t opal_console_write_buffer_space(int64_t term_number, + __be64 *length); +int64_t opal_console_flush(int64_t term_number); +int64_t opal_rtc_read(__be32 *year_month_day, + __be64 *hour_minute_second_millisecond); +int64_t opal_rtc_write(uint32_t year_month_day, + uint64_t hour_minute_second_millisecond); +int64_t opal_tpo_read(uint64_t token, __be32 *year_mon_day, __be32 *hour_min); +int64_t opal_tpo_write(uint64_t token, uint32_t year_mon_day, + uint32_t hour_min); +int64_t opal_cec_power_down(uint64_t request); +int64_t opal_cec_reboot(void); +int64_t opal_cec_reboot2(uint32_t reboot_type, const char *diag); +int64_t opal_read_nvram(uint64_t buffer, uint64_t size, uint64_t offset); +int64_t opal_write_nvram(uint64_t buffer, uint64_t size, uint64_t offset); +int64_t opal_handle_interrupt(uint64_t isn, __be64 *outstanding_event_mask); +int64_t opal_poll_events(__be64 *outstanding_event_mask); +int64_t opal_pci_set_hub_tce_memory(uint64_t hub_id, uint64_t tce_mem_addr, + uint64_t tce_mem_size); +int64_t opal_pci_set_phb_tce_memory(uint64_t phb_id, uint64_t tce_mem_addr, + uint64_t tce_mem_size); +int64_t opal_pci_config_read_byte(uint64_t phb_id, uint64_t bus_dev_func, + uint64_t offset, uint8_t *data); +int64_t opal_pci_config_read_half_word(uint64_t phb_id, uint64_t bus_dev_func, + uint64_t offset, __be16 *data); +int64_t opal_pci_config_read_word(uint64_t phb_id, uint64_t bus_dev_func, + uint64_t offset, __be32 *data); +int64_t opal_pci_config_write_byte(uint64_t phb_id, uint64_t bus_dev_func, + uint64_t offset, uint8_t data); +int64_t opal_pci_config_write_half_word(uint64_t phb_id, uint64_t bus_dev_func, + uint64_t offset, uint16_t data); +int64_t opal_pci_config_write_word(uint64_t phb_id, uint64_t bus_dev_func, + uint64_t offset, uint32_t data); +int64_t opal_set_xive(uint32_t isn, uint16_t server, uint8_t priority); +int64_t opal_get_xive(uint32_t isn, __be16 *server, uint8_t *priority); +int64_t opal_register_exception_handler(uint64_t opal_exception, + uint64_t handler_address, + uint64_t glue_cache_line); +int64_t opal_pci_eeh_freeze_status(uint64_t phb_id, uint64_t pe_number, + uint8_t *freeze_state, + __be16 *pci_error_type, + __be64 *phb_status); +int64_t opal_pci_eeh_freeze_clear(uint64_t phb_id, uint64_t pe_number, + uint64_t eeh_action_token); +int64_t opal_pci_eeh_freeze_set(uint64_t phb_id, uint64_t pe_number, + uint64_t eeh_action_token); +int64_t opal_pci_err_inject(uint64_t phb_id, uint32_t pe_no, uint32_t type, + uint32_t func, uint64_t addr, uint64_t mask); +int64_t opal_pci_shpc(uint64_t phb_id, uint64_t shpc_action, uint8_t *state); + + + +int64_t opal_pci_phb_mmio_enable(uint64_t phb_id, uint16_t window_type, + uint16_t window_num, uint16_t enable); +int64_t opal_pci_set_phb_mem_window(uint64_t phb_id, uint16_t window_type, + uint16_t window_num, + uint64_t starting_real_address, + uint64_t starting_pci_address, + uint64_t size); +int64_t opal_pci_map_pe_mmio_window(uint64_t phb_id, uint16_t pe_number, + uint16_t window_type, uint16_t window_num, + uint16_t segment_num); +int64_t opal_pci_set_phb_table_memory(uint64_t phb_id, uint64_t rtt_addr, + uint64_t ivt_addr, uint64_t ivt_len, + uint64_t reject_array_addr, + uint64_t peltv_addr); +int64_t opal_pci_set_pe(uint64_t phb_id, uint64_t pe_number, uint64_t bus_dev_func, + uint8_t bus_compare, uint8_t dev_compare, uint8_t func_compare, + uint8_t pe_action); +int64_t opal_pci_set_peltv(uint64_t phb_id, uint32_t parent_pe, uint32_t child_pe, + uint8_t state); +int64_t opal_pci_set_mve(uint64_t phb_id, uint32_t mve_number, uint32_t pe_number); +int64_t opal_pci_set_mve_enable(uint64_t phb_id, uint32_t mve_number, + uint32_t state); +int64_t opal_pci_get_xive_reissue(uint64_t phb_id, uint32_t xive_number, + uint8_t *p_bit, uint8_t *q_bit); +int64_t opal_pci_set_xive_reissue(uint64_t phb_id, uint32_t xive_number, + uint8_t p_bit, uint8_t q_bit); +int64_t opal_pci_msi_eoi(uint64_t phb_id, uint32_t hw_irq); +int64_t opal_pci_set_xive_pe(uint64_t phb_id, uint32_t pe_number, + uint32_t xive_num); +int64_t opal_get_xive_source(uint64_t phb_id, uint32_t xive_num, + __be32 *interrupt_source_number); +int64_t opal_get_msi_32(uint64_t phb_id, uint32_t mve_number, uint32_t xive_num, + uint8_t msi_range, __be32 *msi_address, + __be32 *message_data); +int64_t opal_get_msi_64(uint64_t phb_id, uint32_t mve_number, + uint32_t xive_num, uint8_t msi_range, + __be64 *msi_address, __be32 *message_data); +int64_t opal_start_cpu(uint64_t thread_number, uint64_t start_address); +int64_t opal_query_cpu_status(uint64_t thread_number, uint8_t *thread_status); +int64_t opal_write_oppanel(oppanel_line_t *lines, uint64_t num_lines); +int64_t opal_pci_map_pe_dma_window(uint64_t phb_id, uint16_t pe_number, uint16_t window_id, + uint16_t tce_levels, uint64_t tce_table_addr, + uint64_t tce_table_size, uint64_t tce_page_size); +int64_t opal_pci_map_pe_dma_window_real(uint64_t phb_id, uint16_t pe_number, + uint16_t dma_window_number, uint64_t pci_start_addr, + uint64_t pci_mem_size); +int64_t opal_pci_reset(uint64_t id, uint8_t reset_scope, uint8_t assert_state); + +int64_t opal_pci_get_hub_diag_data(uint64_t hub_id, void *diag_buffer, + uint64_t diag_buffer_len); +int64_t opal_pci_get_phb_diag_data(uint64_t phb_id, void *diag_buffer, + uint64_t diag_buffer_len); +int64_t opal_pci_get_phb_diag_data2(uint64_t phb_id, void *diag_buffer, + uint64_t diag_buffer_len); +int64_t opal_pci_fence_phb(uint64_t phb_id); +int64_t opal_pci_reinit(uint64_t phb_id, uint64_t reinit_scope, uint64_t data); +int64_t opal_pci_mask_pe_error(uint64_t phb_id, uint16_t pe_number, uint8_t error_type, uint8_t mask_action); +int64_t opal_set_slot_led_status(uint64_t phb_id, uint64_t slot_id, uint8_t led_type, uint8_t led_action); +int64_t opal_get_epow_status(__be16 *epow_status, __be16 *num_epow_classes); +int64_t opal_get_dpo_status(__be64 *dpo_timeout); +int64_t opal_set_system_attention_led(uint8_t led_action); +int64_t opal_pci_next_error(uint64_t phb_id, __be64 *first_frozen_pe, + __be16 *pci_error_type, __be16 *severity); +int64_t opal_pci_poll(uint64_t id); +int64_t opal_return_cpu(void); +int64_t opal_check_token(uint64_t token); +int64_t opal_reinit_cpus(uint64_t flags); + +int64_t opal_xscom_read(uint32_t gcid, uint64_t pcb_addr, __be64 *val); +int64_t opal_xscom_write(uint32_t gcid, uint64_t pcb_addr, uint64_t val); + +int64_t opal_lpc_write(uint32_t chip_id, enum OpalLPCAddressType addr_type, + uint32_t addr, uint32_t data, uint32_t sz); +int64_t opal_lpc_read(uint32_t chip_id, enum OpalLPCAddressType addr_type, + uint32_t addr, __be32 *data, uint32_t sz); + +int64_t opal_read_elog(uint64_t buffer, uint64_t size, uint64_t log_id); +int64_t opal_get_elog_size(__be64 *log_id, __be64 *size, __be64 *elog_type); +int64_t opal_write_elog(uint64_t buffer, uint64_t size, uint64_t offset); +int64_t opal_send_ack_elog(uint64_t log_id); +void opal_resend_pending_logs(void); + +int64_t opal_validate_flash(uint64_t buffer, uint32_t *size, uint32_t *result); +int64_t opal_manage_flash(uint8_t op); +int64_t opal_update_flash(uint64_t blk_list); +int64_t opal_dump_init(uint8_t dump_type); +int64_t opal_dump_info(__be32 *dump_id, __be32 *dump_size); +int64_t opal_dump_info2(__be32 *dump_id, __be32 *dump_size, __be32 *dump_type); +int64_t opal_dump_read(uint32_t dump_id, uint64_t buffer); +int64_t opal_dump_ack(uint32_t dump_id); +int64_t opal_dump_resend_notification(void); + +int64_t opal_get_msg(uint64_t buffer, uint64_t size); +int64_t opal_write_oppanel_async(uint64_t token, oppanel_line_t *lines, + uint64_t num_lines); +int64_t opal_check_completion(uint64_t buffer, uint64_t size, uint64_t token); +int64_t opal_sync_host_reboot(void); +int64_t opal_get_param(uint64_t token, uint32_t param_id, uint64_t buffer, + uint64_t length); +int64_t opal_set_param(uint64_t token, uint32_t param_id, uint64_t buffer, + uint64_t length); +int64_t opal_sensor_read(uint32_t sensor_hndl, int token, __be32 *sensor_data); +int64_t opal_sensor_read_u64(u32 sensor_hndl, int token, __be64 *sensor_data); +int64_t opal_handle_hmi(void); +int64_t opal_handle_hmi2(__be64 *out_flags); +int64_t opal_register_dump_region(uint32_t id, uint64_t start, uint64_t end); +int64_t opal_unregister_dump_region(uint32_t id); +int64_t opal_slw_set_reg(uint64_t cpu_pir, uint64_t sprn, uint64_t val); +int64_t opal_config_cpu_idle_state(uint64_t state, uint64_t flag); +int64_t opal_pci_set_phb_cxl_mode(uint64_t phb_id, uint64_t mode, uint64_t pe_number); +int64_t opal_pci_get_pbcq_tunnel_bar(uint64_t phb_id, uint64_t *addr); +int64_t opal_pci_set_pbcq_tunnel_bar(uint64_t phb_id, uint64_t addr); +int64_t opal_ipmi_send(uint64_t interface, struct opal_ipmi_msg *msg, + uint64_t msg_len); +int64_t opal_ipmi_recv(uint64_t interface, struct opal_ipmi_msg *msg, + uint64_t *msg_len); +int64_t opal_i2c_request(uint64_t async_token, uint32_t bus_id, + struct opal_i2c_request *oreq); +int64_t opal_prd_msg(struct opal_prd_msg *msg); +int64_t opal_leds_get_ind(char *loc_code, __be64 *led_mask, + __be64 *led_value, __be64 *max_led_type); +int64_t opal_leds_set_ind(uint64_t token, char *loc_code, const u64 led_mask, + const u64 led_value, __be64 *max_led_type); + +int64_t opal_flash_read(uint64_t id, uint64_t offset, uint64_t buf, + uint64_t size, uint64_t token); +int64_t opal_flash_write(uint64_t id, uint64_t offset, uint64_t buf, + uint64_t size, uint64_t token); +int64_t opal_flash_erase(uint64_t id, uint64_t offset, uint64_t size, + uint64_t token); +int64_t opal_get_device_tree(uint32_t phandle, uint64_t buf, uint64_t len); +int64_t opal_pci_get_presence_state(uint64_t id, uint64_t data); +int64_t opal_pci_get_power_state(uint64_t id, uint64_t data); +int64_t opal_pci_set_power_state(uint64_t async_token, uint64_t id, + uint64_t data); +int64_t opal_pci_poll2(uint64_t id, uint64_t data); + +int64_t opal_int_get_xirr(uint32_t *out_xirr, bool just_poll); +int64_t opal_int_set_cppr(uint8_t cppr); +int64_t opal_int_eoi(uint32_t xirr); +int64_t opal_int_set_mfrr(uint32_t cpu, uint8_t mfrr); +int64_t opal_pci_tce_kill(uint64_t phb_id, uint32_t kill_type, + uint32_t pe_num, uint32_t tce_size, + uint64_t dma_addr, uint32_t npages); +int64_t opal_nmmu_set_ptcr(uint64_t chip_id, uint64_t ptcr); +int64_t opal_xive_reset(uint64_t version); +int64_t opal_xive_get_irq_info(uint32_t girq, + __be64 *out_flags, + __be64 *out_eoi_page, + __be64 *out_trig_page, + __be32 *out_esb_shift, + __be32 *out_src_chip); +int64_t opal_xive_get_irq_config(uint32_t girq, __be64 *out_vp, + uint8_t *out_prio, __be32 *out_lirq); +int64_t opal_xive_set_irq_config(uint32_t girq, uint64_t vp, uint8_t prio, + uint32_t lirq); +int64_t opal_xive_get_queue_info(uint64_t vp, uint32_t prio, + __be64 *out_qpage, + __be64 *out_qsize, + __be64 *out_qeoi_page, + __be32 *out_escalate_irq, + __be64 *out_qflags); +int64_t opal_xive_set_queue_info(uint64_t vp, uint32_t prio, + uint64_t qpage, + uint64_t qsize, + uint64_t qflags); +int64_t opal_xive_donate_page(uint32_t chip_id, uint64_t addr); +int64_t opal_xive_alloc_vp_block(uint32_t alloc_order); +int64_t opal_xive_free_vp_block(uint64_t vp); +int64_t opal_xive_get_vp_info(uint64_t vp, + __be64 *out_flags, + __be64 *out_cam_value, + __be64 *out_report_cl_pair, + __be32 *out_chip_id); +int64_t opal_xive_set_vp_info(uint64_t vp, + uint64_t flags, + uint64_t report_cl_pair); +int64_t opal_xive_allocate_irq_raw(uint32_t chip_id); +int64_t opal_xive_free_irq(uint32_t girq); +int64_t opal_xive_sync(uint32_t type, uint32_t id); +int64_t opal_xive_dump(uint32_t type, uint32_t id); +int64_t opal_xive_get_queue_state(uint64_t vp, uint32_t prio, + __be32 *out_qtoggle, + __be32 *out_qindex); +int64_t opal_xive_set_queue_state(uint64_t vp, uint32_t prio, + uint32_t qtoggle, + uint32_t qindex); +int64_t opal_xive_get_vp_state(uint64_t vp, __be64 *out_w01); + +int64_t opal_imc_counters_init(uint32_t type, uint64_t address, + uint64_t cpu_pir); +int64_t opal_imc_counters_start(uint32_t type, uint64_t cpu_pir); +int64_t opal_imc_counters_stop(uint32_t type, uint64_t cpu_pir); + +int opal_get_powercap(u32 handle, int token, u32 *pcap); +int opal_set_powercap(u32 handle, int token, u32 pcap); +int opal_get_power_shift_ratio(u32 handle, int token, u32 *psr); +int opal_set_power_shift_ratio(u32 handle, int token, u32 psr); +int opal_sensor_group_clear(u32 group_hndl, int token); +int opal_sensor_group_enable(u32 group_hndl, int token, bool enable); +int opal_nx_coproc_init(uint32_t chip_id, uint32_t ct); + +int opal_secvar_get(const char *key, uint64_t key_len, u8 *data, + uint64_t *data_size); +int opal_secvar_get_next(const char *key, uint64_t *key_len, + uint64_t key_buf_size); +int opal_secvar_enqueue_update(const char *key, uint64_t key_len, u8 *data, + uint64_t data_size); + +s64 opal_mpipl_update(enum opal_mpipl_ops op, u64 src, u64 dest, u64 size); +s64 opal_mpipl_register_tag(enum opal_mpipl_tags tag, u64 addr); +s64 opal_mpipl_query_tag(enum opal_mpipl_tags tag, u64 *addr); + +s64 opal_signal_system_reset(s32 cpu); +s64 opal_quiesce(u64 shutdown_type, s32 cpu); + +/* Internal functions */ +extern int early_init_dt_scan_opal(unsigned long node, const char *uname, + int depth, void *data); +extern int early_init_dt_scan_recoverable_ranges(unsigned long node, + const char *uname, int depth, void *data); +extern void opal_configure_cores(void); + +extern int opal_get_chars(uint32_t vtermno, char *buf, int count); +extern int opal_put_chars(uint32_t vtermno, const char *buf, int total_len); +extern int opal_put_chars_atomic(uint32_t vtermno, const char *buf, int total_len); +extern int opal_flush_chars(uint32_t vtermno, bool wait); +extern int opal_flush_console(uint32_t vtermno); + +extern void hvc_opal_init_early(void); + +extern int opal_notifier_register(struct notifier_block *nb); +extern int opal_notifier_unregister(struct notifier_block *nb); + +extern int opal_message_notifier_register(enum opal_msg_type msg_type, + struct notifier_block *nb); +extern int opal_message_notifier_unregister(enum opal_msg_type msg_type, + struct notifier_block *nb); +extern void opal_notifier_enable(void); +extern void opal_notifier_disable(void); +extern void opal_notifier_update_evt(uint64_t evt_mask, uint64_t evt_val); + +extern int opal_async_get_token_interruptible(void); +extern int opal_async_release_token(int token); +extern int opal_async_wait_response(uint64_t token, struct opal_msg *msg); +extern int opal_async_wait_response_interruptible(uint64_t token, + struct opal_msg *msg); +extern int opal_get_sensor_data(u32 sensor_hndl, u32 *sensor_data); +extern int opal_get_sensor_data_u64(u32 sensor_hndl, u64 *sensor_data); +extern int sensor_group_enable(u32 grp_hndl, bool enable); + +struct rtc_time; +extern time64_t opal_get_boot_time(void); +extern void opal_nvram_init(void); +extern void opal_flash_update_init(void); +extern void opal_flash_update_print_message(void); +extern int opal_elog_init(void); +extern void opal_platform_dump_init(void); +extern void opal_sys_param_init(void); +extern void opal_msglog_init(void); +extern void opal_msglog_sysfs_init(void); +extern int opal_async_comp_init(void); +extern int opal_sensor_init(void); +extern int opal_hmi_handler_init(void); +extern int opal_event_init(void); +int opal_power_control_init(void); + +extern int opal_machine_check(struct pt_regs *regs); +extern bool opal_mce_check_early_recovery(struct pt_regs *regs); +extern int opal_hmi_exception_early(struct pt_regs *regs); +extern int opal_hmi_exception_early2(struct pt_regs *regs); +extern int opal_handle_hmi_exception(struct pt_regs *regs); + +extern void opal_shutdown(void); +extern int opal_resync_timebase(void); + +extern void opal_lpc_init(void); + +extern void opal_kmsg_init(void); + +extern int opal_event_request(unsigned int opal_event_nr); + +struct opal_sg_list *opal_vmalloc_to_sg_list(void *vmalloc_addr, + unsigned long vmalloc_size); +void opal_free_sg_list(struct opal_sg_list *sg); + +extern int opal_error_code(int rc); + +ssize_t opal_msglog_copy(char *to, loff_t pos, size_t count); + +static inline int opal_get_async_rc(struct opal_msg msg) +{ + if (msg.msg_type != OPAL_MSG_ASYNC_COMP) + return OPAL_PARAMETER; + else + return be64_to_cpu(msg.params[1]); +} + +void opal_wake_poller(void); + +void opal_powercap_init(void); +void opal_psr_init(void); +void opal_sensor_groups_init(void); + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_OPAL_H */ diff --git a/arch/powerpc/include/asm/oprofile_impl.h b/arch/powerpc/include/asm/oprofile_impl.h new file mode 100644 index 000000000..2a166c297 --- /dev/null +++ b/arch/powerpc/include/asm/oprofile_impl.h @@ -0,0 +1,135 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM + * + * Based on alpha version. + */ + +#ifndef _ASM_POWERPC_OPROFILE_IMPL_H +#define _ASM_POWERPC_OPROFILE_IMPL_H +#ifdef __KERNEL__ + +#define OP_MAX_COUNTER 8 + +/* Per-counter configuration as set via oprofilefs. */ +struct op_counter_config { + unsigned long enabled; + unsigned long event; + unsigned long count; + /* Classic doesn't support per-counter user/kernel selection */ + unsigned long kernel; + unsigned long user; + unsigned long unit_mask; +}; + +/* System-wide configuration as set via oprofilefs. */ +struct op_system_config { +#ifdef CONFIG_PPC64 + unsigned long mmcr0; + unsigned long mmcr1; + unsigned long mmcra; +#ifdef CONFIG_OPROFILE_CELL + /* Register for oprofile user tool to check cell kernel profiling + * support. + */ + unsigned long cell_support; +#endif +#endif + unsigned long enable_kernel; + unsigned long enable_user; +}; + +/* Per-arch configuration */ +struct op_powerpc_model { + int (*reg_setup) (struct op_counter_config *, + struct op_system_config *, + int num_counters); + int (*cpu_setup) (struct op_counter_config *); + int (*start) (struct op_counter_config *); + int (*global_start) (struct op_counter_config *); + void (*stop) (void); + void (*global_stop) (void); + int (*sync_start)(void); + int (*sync_stop)(void); + void (*handle_interrupt) (struct pt_regs *, + struct op_counter_config *); + int num_counters; +}; + +extern struct op_powerpc_model op_model_fsl_emb; +extern struct op_powerpc_model op_model_power4; +extern struct op_powerpc_model op_model_7450; +extern struct op_powerpc_model op_model_cell; +extern struct op_powerpc_model op_model_pa6t; + + +/* All the classic PPC parts use these */ +static inline unsigned int classic_ctr_read(unsigned int i) +{ + switch(i) { + case 0: + return mfspr(SPRN_PMC1); + case 1: + return mfspr(SPRN_PMC2); + case 2: + return mfspr(SPRN_PMC3); + case 3: + return mfspr(SPRN_PMC4); + case 4: + return mfspr(SPRN_PMC5); + case 5: + return mfspr(SPRN_PMC6); + +/* No PPC32 chip has more than 6 so far */ +#ifdef CONFIG_PPC64 + case 6: + return mfspr(SPRN_PMC7); + case 7: + return mfspr(SPRN_PMC8); +#endif + default: + return 0; + } +} + +static inline void classic_ctr_write(unsigned int i, unsigned int val) +{ + switch(i) { + case 0: + mtspr(SPRN_PMC1, val); + break; + case 1: + mtspr(SPRN_PMC2, val); + break; + case 2: + mtspr(SPRN_PMC3, val); + break; + case 3: + mtspr(SPRN_PMC4, val); + break; + case 4: + mtspr(SPRN_PMC5, val); + break; + case 5: + mtspr(SPRN_PMC6, val); + break; + +/* No PPC32 chip has more than 6, yet */ +#ifdef CONFIG_PPC64 + case 6: + mtspr(SPRN_PMC7, val); + break; + case 7: + mtspr(SPRN_PMC8, val); + break; +#endif + default: + break; + } +} + + +extern void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_OPROFILE_IMPL_H */ diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h new file mode 100644 index 000000000..555aa3580 --- /dev/null +++ b/arch/powerpc/include/asm/paca.h @@ -0,0 +1,291 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * This control block defines the PACA which defines the processor + * specific data for each logical processor on the system. + * There are some pointers defined that are utilized by PLIC. + * + * C 2001 PPC 64 Team, IBM Corp + */ +#ifndef _ASM_POWERPC_PACA_H +#define _ASM_POWERPC_PACA_H +#ifdef __KERNEL__ + +#ifdef CONFIG_PPC64 + +#include <linux/string.h> +#include <asm/types.h> +#include <asm/mmu.h> +#include <asm/page.h> +#ifdef CONFIG_PPC_BOOK3E +#include <asm/exception-64e.h> +#else +#include <asm/exception-64s.h> +#endif +#ifdef CONFIG_KVM_BOOK3S_64_HANDLER +#include <asm/kvm_book3s_asm.h> +#endif +#include <asm/accounting.h> +#include <asm/hmi.h> +#include <asm/cpuidle.h> +#include <asm/atomic.h> + +#include <asm-generic/mmiowb_types.h> + +register struct paca_struct *local_paca asm("r13"); + +#if defined(CONFIG_DEBUG_PREEMPT) && defined(CONFIG_SMP) +extern unsigned int debug_smp_processor_id(void); /* from linux/smp.h */ +/* + * Add standard checks that preemption cannot occur when using get_paca(): + * otherwise the paca_struct it points to may be the wrong one just after. + */ +#define get_paca() ((void) debug_smp_processor_id(), local_paca) +#else +#define get_paca() local_paca +#endif + +#define get_slb_shadow() (get_paca()->slb_shadow_ptr) + +struct task_struct; +struct rtas_args; +struct lppaca; + +/* + * Defines the layout of the paca. + * + * This structure is not directly accessed by firmware or the service + * processor. + */ +struct paca_struct { +#ifdef CONFIG_PPC_PSERIES + /* + * Because hw_cpu_id, unlike other paca fields, is accessed + * routinely from other CPUs (from the IRQ code), we stick to + * read-only (after boot) fields in the first cacheline to + * avoid cacheline bouncing. + */ + + struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */ +#endif /* CONFIG_PPC_PSERIES */ + + /* + * MAGIC: the spinlock functions in arch/powerpc/lib/locks.c + * load lock_token and paca_index with a single lwz + * instruction. They must travel together and be properly + * aligned. + */ +#ifdef __BIG_ENDIAN__ + u16 lock_token; /* Constant 0x8000, used in locks */ + u16 paca_index; /* Logical processor number */ +#else + u16 paca_index; /* Logical processor number */ + u16 lock_token; /* Constant 0x8000, used in locks */ +#endif + + u64 kernel_toc; /* Kernel TOC address */ + u64 kernelbase; /* Base address of kernel */ + u64 kernel_msr; /* MSR while running in kernel */ + void *emergency_sp; /* pointer to emergency stack */ + u64 data_offset; /* per cpu data offset */ + s16 hw_cpu_id; /* Physical processor number */ + u8 cpu_start; /* At startup, processor spins until */ + /* this becomes non-zero. */ + u8 kexec_state; /* set when kexec down has irqs off */ +#ifdef CONFIG_PPC_BOOK3S_64 + struct slb_shadow *slb_shadow_ptr; + struct dtl_entry *dispatch_log; + struct dtl_entry *dispatch_log_end; +#endif + u64 dscr_default; /* per-CPU default DSCR */ + +#ifdef CONFIG_PPC_BOOK3S_64 + /* + * Now, starting in cacheline 2, the exception save areas + */ + /* used for most interrupts/exceptions */ + u64 exgen[EX_SIZE] __attribute__((aligned(0x80))); + u64 exslb[EX_SIZE]; /* used for SLB/segment table misses + * on the linear mapping */ + /* SLB related definitions */ + u16 vmalloc_sllp; + u8 slb_cache_ptr; + u8 stab_rr; /* stab/slb round-robin counter */ +#ifdef CONFIG_DEBUG_VM + u8 in_kernel_slb_handler; +#endif + u32 slb_used_bitmap; /* Bitmaps for first 32 SLB entries. */ + u32 slb_kern_bitmap; + u32 slb_cache[SLB_CACHE_ENTRIES]; +#endif /* CONFIG_PPC_BOOK3S_64 */ + +#ifdef CONFIG_PPC_BOOK3E + u64 exgen[8] __aligned(0x40); + /* Keep pgd in the same cacheline as the start of extlb */ + pgd_t *pgd __aligned(0x40); /* Current PGD */ + pgd_t *kernel_pgd; /* Kernel PGD */ + + /* Shared by all threads of a core -- points to tcd of first thread */ + struct tlb_core_data *tcd_ptr; + + /* + * We can have up to 3 levels of reentrancy in the TLB miss handler, + * in each of four exception levels (normal, crit, mcheck, debug). + */ + u64 extlb[12][EX_TLB_SIZE / sizeof(u64)]; + u64 exmc[8]; /* used for machine checks */ + u64 excrit[8]; /* used for crit interrupts */ + u64 exdbg[8]; /* used for debug interrupts */ + + /* Kernel stack pointers for use by special exceptions */ + void *mc_kstack; + void *crit_kstack; + void *dbg_kstack; + + struct tlb_core_data tcd; +#endif /* CONFIG_PPC_BOOK3E */ + +#ifdef CONFIG_PPC_BOOK3S + mm_context_id_t mm_ctx_id; +#ifdef CONFIG_PPC_MM_SLICES + unsigned char mm_ctx_low_slices_psize[BITS_PER_LONG / BITS_PER_BYTE]; + unsigned char mm_ctx_high_slices_psize[SLICE_ARRAY_SIZE]; + unsigned long mm_ctx_slb_addr_limit; +#else + u16 mm_ctx_user_psize; + u16 mm_ctx_sllp; +#endif +#endif + + /* + * then miscellaneous read-write fields + */ + struct task_struct *__current; /* Pointer to current */ + u64 kstack; /* Saved Kernel stack addr */ + u64 saved_r1; /* r1 save for RTAS calls or PM or EE=0 */ + u64 saved_msr; /* MSR saved here by enter_rtas */ +#ifdef CONFIG_PPC_BOOK3E + u16 trap_save; /* Used when bad stack is encountered */ +#endif + u8 irq_soft_mask; /* mask for irq soft masking */ + u8 irq_happened; /* irq happened while soft-disabled */ + u8 irq_work_pending; /* IRQ_WORK interrupt while soft-disable */ +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE + u8 pmcregs_in_use; /* pseries puts this in lppaca */ +#endif + u64 sprg_vdso; /* Saved user-visible sprg */ +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + u64 tm_scratch; /* TM scratch area for reclaim */ +#endif + +#ifdef CONFIG_PPC_POWERNV + /* PowerNV idle fields */ + /* PNV_CORE_IDLE_* bits, all siblings work on thread 0 paca */ + unsigned long idle_state; + union { + /* P7/P8 specific fields */ + struct { + /* PNV_THREAD_RUNNING/NAP/SLEEP */ + u8 thread_idle_state; + /* Mask to denote subcore sibling threads */ + u8 subcore_sibling_mask; + }; + + /* P9 specific fields */ + struct { +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE + /* The PSSCR value that the kernel requested before going to stop */ + u64 requested_psscr; + /* Flag to request this thread not to stop */ + atomic_t dont_stop; +#endif + }; + }; +#endif + +#ifdef CONFIG_PPC_BOOK3S_64 + /* Non-maskable exceptions that are not performance critical */ + u64 exnmi[EX_SIZE]; /* used for system reset (nmi) */ + u64 exmc[EX_SIZE]; /* used for machine checks */ +#endif +#ifdef CONFIG_PPC_BOOK3S_64 + /* Exclusive stacks for system reset and machine check exception. */ + void *nmi_emergency_sp; + void *mc_emergency_sp; + + u16 in_nmi; /* In nmi handler */ + + /* + * Flag to check whether we are in machine check early handler + * and already using emergency stack. + */ + u16 in_mce; + u8 hmi_event_available; /* HMI event is available */ + u8 hmi_p9_special_emu; /* HMI P9 special emulation */ + u32 hmi_irqs; /* HMI irq stat */ +#endif + u8 ftrace_enabled; /* Hard disable ftrace */ + + /* Stuff for accurate time accounting */ + struct cpu_accounting_data accounting; + u64 dtl_ridx; /* read index in dispatch log */ + struct dtl_entry *dtl_curr; /* pointer corresponding to dtl_ridx */ + +#ifdef CONFIG_KVM_BOOK3S_HANDLER +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE + /* We use this to store guest state in */ + struct kvmppc_book3s_shadow_vcpu shadow_vcpu; +#endif + struct kvmppc_host_state kvm_hstate; +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE + /* + * Bitmap for sibling subcore status. See kvm/book3s_hv_ras.c for + * more details + */ + struct sibling_subcore_state *sibling_subcore_state; +#endif +#endif +#ifdef CONFIG_PPC_BOOK3S_64 + /* + * rfi fallback flush must be in its own cacheline to prevent + * other paca data leaking into the L1d + */ + u64 exrfi[EX_SIZE] __aligned(0x80); + void *rfi_flush_fallback_area; + u64 l1d_flush_size; +#endif +#ifdef CONFIG_PPC_PSERIES + struct rtas_args *rtas_args_reentrant; + u8 *mce_data_buf; /* buffer to hold per cpu rtas errlog */ +#endif /* CONFIG_PPC_PSERIES */ + +#ifdef CONFIG_PPC_BOOK3S_64 + /* Capture SLB related old contents in MCE handler. */ + struct slb_entry *mce_faulty_slbs; + u16 slb_save_cache_ptr; +#endif /* CONFIG_PPC_BOOK3S_64 */ +#ifdef CONFIG_STACKPROTECTOR + unsigned long canary; +#endif +#ifdef CONFIG_MMIOWB + struct mmiowb_state mmiowb_state; +#endif +} ____cacheline_aligned; + +extern void copy_mm_to_paca(struct mm_struct *mm); +extern struct paca_struct **paca_ptrs; +extern void initialise_paca(struct paca_struct *new_paca, int cpu); +extern void setup_paca(struct paca_struct *new_paca); +extern void allocate_paca_ptrs(void); +extern void allocate_paca(int cpu); +extern void free_unused_pacas(void); + +#else /* CONFIG_PPC64 */ + +static inline void allocate_paca_ptrs(void) { }; +static inline void allocate_paca(int cpu) { }; +static inline void free_unused_pacas(void) { }; + +#endif /* CONFIG_PPC64 */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PACA_H */ diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h new file mode 100644 index 000000000..03ae544eb --- /dev/null +++ b/arch/powerpc/include/asm/page.h @@ -0,0 +1,341 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_PAGE_H +#define _ASM_POWERPC_PAGE_H + +/* + * Copyright (C) 2001,2005 IBM Corporation. + */ + +#ifndef __ASSEMBLY__ +#include <linux/types.h> +#include <linux/kernel.h> +#else +#include <asm/types.h> +#endif +#include <asm/asm-const.h> + +/* + * On regular PPC32 page size is 4K (but we support 4K/16K/64K/256K pages + * on PPC44x and 4K/16K on 8xx). For PPC64 we support either 4K or 64K software + * page size. When using 64K pages however, whether we are really supporting + * 64K pages in HW or not is irrelevant to those definitions. + */ +#define PAGE_SHIFT CONFIG_PPC_PAGE_SHIFT +#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT) + +#ifndef __ASSEMBLY__ +#ifndef CONFIG_HUGETLB_PAGE +#define HPAGE_SHIFT PAGE_SHIFT +#elif defined(CONFIG_PPC_BOOK3S_64) +extern unsigned int hpage_shift; +#define HPAGE_SHIFT hpage_shift +#elif defined(CONFIG_PPC_8xx) +#define HPAGE_SHIFT 19 /* 512k pages */ +#elif defined(CONFIG_PPC_FSL_BOOK3E) +#define HPAGE_SHIFT 22 /* 4M pages */ +#endif +#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) +#define HPAGE_MASK (~(HPAGE_SIZE - 1)) +#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) +#define HUGE_MAX_HSTATE (MMU_PAGE_COUNT-1) +#endif + +/* + * Subtle: (1 << PAGE_SHIFT) is an int, not an unsigned long. So if we + * assign PAGE_MASK to a larger type it gets extended the way we want + * (i.e. with 1s in the high bits) + */ +#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) + +/* + * KERNELBASE is the virtual address of the start of the kernel, it's often + * the same as PAGE_OFFSET, but _might not be_. + * + * The kdump dump kernel is one example where KERNELBASE != PAGE_OFFSET. + * + * PAGE_OFFSET is the virtual address of the start of lowmem. + * + * PHYSICAL_START is the physical address of the start of the kernel. + * + * MEMORY_START is the physical address of the start of lowmem. + * + * KERNELBASE, PAGE_OFFSET, and PHYSICAL_START are all configurable on + * ppc32 and based on how they are set we determine MEMORY_START. + * + * For the linear mapping the following equation should be true: + * KERNELBASE - PAGE_OFFSET = PHYSICAL_START - MEMORY_START + * + * Also, KERNELBASE >= PAGE_OFFSET and PHYSICAL_START >= MEMORY_START + * + * There are two ways to determine a physical address from a virtual one: + * va = pa + PAGE_OFFSET - MEMORY_START + * va = pa + KERNELBASE - PHYSICAL_START + * + * If you want to know something's offset from the start of the kernel you + * should subtract KERNELBASE. + * + * If you want to test if something's a kernel address, use is_kernel_addr(). + */ + +#define KERNELBASE ASM_CONST(CONFIG_KERNEL_START) +#define PAGE_OFFSET ASM_CONST(CONFIG_PAGE_OFFSET) +#define LOAD_OFFSET ASM_CONST((CONFIG_KERNEL_START-CONFIG_PHYSICAL_START)) + +#if defined(CONFIG_NONSTATIC_KERNEL) +#ifndef __ASSEMBLY__ + +extern phys_addr_t memstart_addr; +extern phys_addr_t kernstart_addr; + +#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_PPC32) +extern long long virt_phys_offset; +#endif + +#endif /* __ASSEMBLY__ */ +#define PHYSICAL_START kernstart_addr + +#else /* !CONFIG_NONSTATIC_KERNEL */ +#define PHYSICAL_START ASM_CONST(CONFIG_PHYSICAL_START) +#endif + +/* See Description below for VIRT_PHYS_OFFSET */ +#if defined(CONFIG_PPC32) && defined(CONFIG_BOOKE) +#ifdef CONFIG_RELOCATABLE +#define VIRT_PHYS_OFFSET virt_phys_offset +#else +#define VIRT_PHYS_OFFSET (KERNELBASE - PHYSICAL_START) +#endif +#endif + +#ifdef CONFIG_PPC64 +#define MEMORY_START 0UL +#elif defined(CONFIG_NONSTATIC_KERNEL) +#define MEMORY_START memstart_addr +#else +#define MEMORY_START (PHYSICAL_START + PAGE_OFFSET - KERNELBASE) +#endif + +#ifdef CONFIG_FLATMEM +#define ARCH_PFN_OFFSET ((unsigned long)(MEMORY_START >> PAGE_SHIFT)) +#ifndef __ASSEMBLY__ +extern unsigned long max_mapnr; +static inline bool pfn_valid(unsigned long pfn) +{ + unsigned long min_pfn = ARCH_PFN_OFFSET; + + return pfn >= min_pfn && pfn < max_mapnr; +} +#endif +#endif + +#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) +#define virt_to_page(kaddr) pfn_to_page(virt_to_pfn(kaddr)) +#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) + +#define virt_addr_valid(vaddr) ({ \ + unsigned long _addr = (unsigned long)vaddr; \ + _addr >= PAGE_OFFSET && _addr < (unsigned long)high_memory && \ + pfn_valid(virt_to_pfn(_addr)); \ +}) + +/* + * On Book-E parts we need __va to parse the device tree and we can't + * determine MEMORY_START until then. However we can determine PHYSICAL_START + * from information at hand (program counter, TLB lookup). + * + * On BookE with RELOCATABLE && PPC32 + * + * With RELOCATABLE && PPC32, we support loading the kernel at any physical + * address without any restriction on the page alignment. + * + * We find the runtime address of _stext and relocate ourselves based on + * the following calculation: + * + * virtual_base = ALIGN_DOWN(KERNELBASE,256M) + + * MODULO(_stext.run,256M) + * and create the following mapping: + * + * ALIGN_DOWN(_stext.run,256M) => ALIGN_DOWN(KERNELBASE,256M) + * + * When we process relocations, we cannot depend on the + * existing equation for the __va()/__pa() translations: + * + * __va(x) = (x) - PHYSICAL_START + KERNELBASE + * + * Where: + * PHYSICAL_START = kernstart_addr = Physical address of _stext + * KERNELBASE = Compiled virtual address of _stext. + * + * This formula holds true iff, kernel load address is TLB page aligned. + * + * In our case, we need to also account for the shift in the kernel Virtual + * address. + * + * E.g., + * + * Let the kernel be loaded at 64MB and KERNELBASE be 0xc0000000 (same as PAGE_OFFSET). + * In this case, we would be mapping 0 to 0xc0000000, and kernstart_addr = 64M + * + * Now __va(1MB) = (0x100000) - (0x4000000) + 0xc0000000 + * = 0xbc100000 , which is wrong. + * + * Rather, it should be : 0xc0000000 + 0x100000 = 0xc0100000 + * according to our mapping. + * + * Hence we use the following formula to get the translations right: + * + * __va(x) = (x) - [ PHYSICAL_START - Effective KERNELBASE ] + * + * Where : + * PHYSICAL_START = dynamic load address.(kernstart_addr variable) + * Effective KERNELBASE = virtual_base = + * = ALIGN_DOWN(KERNELBASE,256M) + + * MODULO(PHYSICAL_START,256M) + * + * To make the cost of __va() / __pa() more light weight, we introduce + * a new variable virt_phys_offset, which will hold : + * + * virt_phys_offset = Effective KERNELBASE - PHYSICAL_START + * = ALIGN_DOWN(KERNELBASE,256M) - + * ALIGN_DOWN(PHYSICALSTART,256M) + * + * Hence : + * + * __va(x) = x - PHYSICAL_START + Effective KERNELBASE + * = x + virt_phys_offset + * + * and + * __pa(x) = x + PHYSICAL_START - Effective KERNELBASE + * = x - virt_phys_offset + * + * On non-Book-E PPC64 PAGE_OFFSET and MEMORY_START are constants so use + * the other definitions for __va & __pa. + */ +#if defined(CONFIG_PPC32) && defined(CONFIG_BOOKE) +#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + VIRT_PHYS_OFFSET)) +#define __pa(x) ((phys_addr_t)(unsigned long)(x) - VIRT_PHYS_OFFSET) +#else +#ifdef CONFIG_PPC64 + +#define VIRTUAL_WARN_ON(x) WARN_ON(IS_ENABLED(CONFIG_DEBUG_VIRTUAL) && (x)) + +/* + * gcc miscompiles (unsigned long)(&static_var) - PAGE_OFFSET + * with -mcmodel=medium, so we use & and | instead of - and + on 64-bit. + * This also results in better code generation. + */ +#define __va(x) \ +({ \ + VIRTUAL_WARN_ON((unsigned long)(x) >= PAGE_OFFSET); \ + (void *)(unsigned long)((phys_addr_t)(x) | PAGE_OFFSET); \ +}) + +#define __pa(x) \ +({ \ + VIRTUAL_WARN_ON((unsigned long)(x) < PAGE_OFFSET); \ + (unsigned long)(x) & 0x0fffffffffffffffUL; \ +}) + +#else /* 32-bit, non book E */ +#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + PAGE_OFFSET - MEMORY_START)) +#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET + MEMORY_START) +#endif +#endif + +/* + * Unfortunately the PLT is in the BSS in the PPC32 ELF ABI, + * and needs to be executable. This means the whole heap ends + * up being executable. + */ +#define VM_DATA_DEFAULT_FLAGS32 VM_DATA_FLAGS_TSK_EXEC +#define VM_DATA_DEFAULT_FLAGS64 VM_DATA_FLAGS_NON_EXEC + +#ifdef __powerpc64__ +#include <asm/page_64.h> +#else +#include <asm/page_32.h> +#endif + +/* + * Don't compare things with KERNELBASE or PAGE_OFFSET to test for + * "kernelness", use is_kernel_addr() - it should do what you want. + */ +#ifdef CONFIG_PPC_BOOK3E_64 +#define is_kernel_addr(x) ((x) >= 0x8000000000000000ul) +#elif defined(CONFIG_PPC_BOOK3S_64) +#define is_kernel_addr(x) ((x) >= PAGE_OFFSET) +#else +#define is_kernel_addr(x) ((x) >= TASK_SIZE) +#endif + +#ifndef CONFIG_PPC_BOOK3S_64 +/* + * Use the top bit of the higher-level page table entries to indicate whether + * the entries we point to contain hugepages. This works because we know that + * the page tables live in kernel space. If we ever decide to support having + * page tables at arbitrary addresses, this breaks and will have to change. + */ +#ifdef CONFIG_PPC64 +#define PD_HUGE 0x8000000000000000UL +#else +#define PD_HUGE 0x80000000 +#endif + +#else /* CONFIG_PPC_BOOK3S_64 */ +/* + * Book3S 64 stores real addresses in the hugepd entries to + * avoid overlaps with _PAGE_PRESENT and _PAGE_PTE. + */ +#define HUGEPD_ADDR_MASK (0x0ffffffffffffffful & ~HUGEPD_SHIFT_MASK) +#endif /* CONFIG_PPC_BOOK3S_64 */ + +/* + * Some number of bits at the level of the page table that points to + * a hugepte are used to encode the size. This masks those bits. + * On 8xx, HW assistance requires 4k alignment for the hugepte. + */ +#ifdef CONFIG_PPC_8xx +#define HUGEPD_SHIFT_MASK 0xfff +#else +#define HUGEPD_SHIFT_MASK 0x3f +#endif + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_PPC_BOOK3S_64 +#include <asm/pgtable-be-types.h> +#else +#include <asm/pgtable-types.h> +#endif + + +#ifndef CONFIG_HUGETLB_PAGE +#define is_hugepd(pdep) (0) +#define pgd_huge(pgd) (0) +#endif /* CONFIG_HUGETLB_PAGE */ + +struct page; +extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg); +extern void copy_user_page(void *to, void *from, unsigned long vaddr, + struct page *p); +extern int devmem_is_allowed(unsigned long pfn); + +#ifdef CONFIG_PPC_SMLPAR +void arch_free_page(struct page *page, int order); +#define HAVE_ARCH_FREE_PAGE +#endif + +struct vm_area_struct; + +extern unsigned long kernstart_virt_addr; + +static inline unsigned long kaslr_offset(void) +{ + return kernstart_virt_addr - KERNELBASE; +} + +#include <asm-generic/memory_model.h> +#endif /* __ASSEMBLY__ */ +#include <asm/slice.h> + +#endif /* _ASM_POWERPC_PAGE_H */ diff --git a/arch/powerpc/include/asm/page_32.h b/arch/powerpc/include/asm/page_32.h new file mode 100644 index 000000000..d64dfe3ac --- /dev/null +++ b/arch/powerpc/include/asm/page_32.h @@ -0,0 +1,68 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_PAGE_32_H +#define _ASM_POWERPC_PAGE_32_H + +#include <asm/cache.h> + +#if defined(CONFIG_PHYSICAL_ALIGN) && (CONFIG_PHYSICAL_START != 0) +#if (CONFIG_PHYSICAL_START % CONFIG_PHYSICAL_ALIGN) != 0 +#error "CONFIG_PHYSICAL_START must be a multiple of CONFIG_PHYSICAL_ALIGN" +#endif +#endif + +#define VM_DATA_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS32 + +#ifdef CONFIG_NOT_COHERENT_CACHE +#define ARCH_DMA_MINALIGN L1_CACHE_BYTES +#endif + +#ifdef CONFIG_PTE_64BIT +#define PTE_FLAGS_OFFSET 4 /* offset of PTE flags, in bytes */ +#else +#define PTE_FLAGS_OFFSET 0 +#endif + +#if defined(CONFIG_PPC_256K_PAGES) || \ + (defined(CONFIG_PPC_8xx) && defined(CONFIG_PPC_16K_PAGES)) +#define PTE_SHIFT (PAGE_SHIFT - PTE_T_LOG2 - 2) /* 1/4 of a page */ +#else +#define PTE_SHIFT (PAGE_SHIFT - PTE_T_LOG2) /* full page */ +#endif + +#ifndef __ASSEMBLY__ +/* + * The basic type of a PTE - 64 bits for those CPUs with > 32 bit + * physical addressing. + */ +#ifdef CONFIG_PTE_64BIT +typedef unsigned long long pte_basic_t; +#else +typedef unsigned long pte_basic_t; +#endif + +#include <asm/bug.h> + +/* + * Clear page using the dcbz instruction, which doesn't cause any + * memory traffic (except to write out any cache lines which get + * displaced). This only works on cacheable memory. + */ +static inline void clear_page(void *addr) +{ + unsigned int i; + + WARN_ON((unsigned long)addr & (L1_CACHE_BYTES - 1)); + + for (i = 0; i < PAGE_SIZE / L1_CACHE_BYTES; i++, addr += L1_CACHE_BYTES) + dcbz(addr); +} +extern void copy_page(void *to, void *from); + +#include <asm-generic/getorder.h> + +#define PGD_T_LOG2 (__builtin_ffs(sizeof(pgd_t)) - 1) +#define PTE_T_LOG2 (__builtin_ffs(sizeof(pte_t)) - 1) + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_PAGE_32_H */ diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h new file mode 100644 index 000000000..79a9b7c6a --- /dev/null +++ b/arch/powerpc/include/asm/page_64.h @@ -0,0 +1,106 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_PAGE_64_H +#define _ASM_POWERPC_PAGE_64_H + +/* + * Copyright (C) 2001 PPC64 Team, IBM Corp + */ + +#include <asm/asm-const.h> + +/* + * We always define HW_PAGE_SHIFT to 12 as use of 64K pages remains Linux + * specific, every notion of page number shared with the firmware, TCEs, + * iommu, etc... still uses a page size of 4K. + */ +#define HW_PAGE_SHIFT 12 +#define HW_PAGE_SIZE (ASM_CONST(1) << HW_PAGE_SHIFT) +#define HW_PAGE_MASK (~(HW_PAGE_SIZE-1)) + +/* + * PAGE_FACTOR is the number of bits factor between PAGE_SHIFT and + * HW_PAGE_SHIFT, that is 4K pages. + */ +#define PAGE_FACTOR (PAGE_SHIFT - HW_PAGE_SHIFT) + +/* Segment size; normal 256M segments */ +#define SID_SHIFT 28 +#define SID_MASK ASM_CONST(0xfffffffff) +#define ESID_MASK 0xfffffffff0000000UL +#define GET_ESID(x) (((x) >> SID_SHIFT) & SID_MASK) + +/* 1T segments */ +#define SID_SHIFT_1T 40 +#define SID_MASK_1T 0xffffffUL +#define ESID_MASK_1T 0xffffff0000000000UL +#define GET_ESID_1T(x) (((x) >> SID_SHIFT_1T) & SID_MASK_1T) + +#ifndef __ASSEMBLY__ +#include <asm/cache.h> + +typedef unsigned long pte_basic_t; + +static inline void clear_page(void *addr) +{ + unsigned long iterations; + unsigned long onex, twox, fourx, eightx; + + iterations = ppc64_caches.l1d.blocks_per_page / 8; + + /* + * Some verisions of gcc use multiply instructions to + * calculate the offsets so lets give it a hand to + * do better. + */ + onex = ppc64_caches.l1d.block_size; + twox = onex << 1; + fourx = onex << 2; + eightx = onex << 3; + + asm volatile( + "mtctr %1 # clear_page\n\ + .balign 16\n\ +1: dcbz 0,%0\n\ + dcbz %3,%0\n\ + dcbz %4,%0\n\ + dcbz %5,%0\n\ + dcbz %6,%0\n\ + dcbz %7,%0\n\ + dcbz %8,%0\n\ + dcbz %9,%0\n\ + add %0,%0,%10\n\ + bdnz+ 1b" + : "=&r" (addr) + : "r" (iterations), "0" (addr), "b" (onex), "b" (twox), + "b" (twox+onex), "b" (fourx), "b" (fourx+onex), + "b" (twox+fourx), "b" (eightx-onex), "r" (eightx) + : "ctr", "memory"); +} + +extern void copy_page(void *to, void *from); + +/* Log 2 of page table size */ +extern u64 ppc64_pft_size; + +#endif /* __ASSEMBLY__ */ + +#define VM_DATA_DEFAULT_FLAGS \ + (is_32bit_task() ? \ + VM_DATA_DEFAULT_FLAGS32 : VM_DATA_DEFAULT_FLAGS64) + +/* + * This is the default if a program doesn't have a PT_GNU_STACK + * program header entry. The PPC64 ELF ABI has a non executable stack + * stack by default, so in the absence of a PT_GNU_STACK program header + * we turn execute permission off. + */ +#define VM_STACK_DEFAULT_FLAGS32 VM_DATA_FLAGS_EXEC +#define VM_STACK_DEFAULT_FLAGS64 VM_DATA_FLAGS_NON_EXEC + +#define VM_STACK_DEFAULT_FLAGS \ + (is_32bit_task() ? \ + VM_STACK_DEFAULT_FLAGS32 : VM_STACK_DEFAULT_FLAGS64) + +#include <asm-generic/getorder.h> + +#endif /* _ASM_POWERPC_PAGE_64_H */ diff --git a/arch/powerpc/include/asm/paravirt.h b/arch/powerpc/include/asm/paravirt.h new file mode 100644 index 000000000..546c72501 --- /dev/null +++ b/arch/powerpc/include/asm/paravirt.h @@ -0,0 +1,104 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_PARAVIRT_H +#define _ASM_POWERPC_PARAVIRT_H + +#include <linux/jump_label.h> +#include <asm/smp.h> +#ifdef CONFIG_PPC64 +#include <asm/paca.h> +#include <asm/lppaca.h> +#include <asm/hvcall.h> +#endif + +#ifdef CONFIG_PPC_SPLPAR +DECLARE_STATIC_KEY_FALSE(shared_processor); + +static inline bool is_shared_processor(void) +{ + return static_branch_unlikely(&shared_processor); +} + +/* If bit 0 is set, the cpu has been preempted */ +static inline u32 yield_count_of(int cpu) +{ + __be32 yield_count = READ_ONCE(lppaca_of(cpu).yield_count); + return be32_to_cpu(yield_count); +} + +/* + * Spinlock code confers and prods, so don't trace the hcalls because the + * tracing code takes spinlocks which can cause recursion deadlocks. + * + * These calls are made while the lock is not held: the lock slowpath yields if + * it can not acquire the lock, and unlock slow path might prod if a waiter has + * yielded). So this may not be a problem for simple spin locks because the + * tracing does not technically recurse on the lock, but we avoid it anyway. + * + * However the queued spin lock contended path is more strictly ordered: the + * H_CONFER hcall is made after the task has queued itself on the lock, so then + * recursing on that lock will cause the task to then queue up again behind the + * first instance (or worse: queued spinlocks use tricks that assume a context + * never waits on more than one spinlock, so such recursion may cause random + * corruption in the lock code). + */ +static inline void yield_to_preempted(int cpu, u32 yield_count) +{ + plpar_hcall_norets_notrace(H_CONFER, get_hard_smp_processor_id(cpu), yield_count); +} + +static inline void prod_cpu(int cpu) +{ + plpar_hcall_norets_notrace(H_PROD, get_hard_smp_processor_id(cpu)); +} + +static inline void yield_to_any(void) +{ + plpar_hcall_norets_notrace(H_CONFER, -1, 0); +} +#else +static inline bool is_shared_processor(void) +{ + return false; +} + +static inline u32 yield_count_of(int cpu) +{ + return 0; +} + +extern void ___bad_yield_to_preempted(void); +static inline void yield_to_preempted(int cpu, u32 yield_count) +{ + ___bad_yield_to_preempted(); /* This would be a bug */ +} + +extern void ___bad_yield_to_any(void); +static inline void yield_to_any(void) +{ + ___bad_yield_to_any(); /* This would be a bug */ +} + +extern void ___bad_prod_cpu(void); +static inline void prod_cpu(int cpu) +{ + ___bad_prod_cpu(); /* This would be a bug */ +} + +#endif + +#define vcpu_is_preempted vcpu_is_preempted +static inline bool vcpu_is_preempted(int cpu) +{ + if (!is_shared_processor()) + return false; + if (yield_count_of(cpu) & 1) + return true; + return false; +} + +static inline bool pv_is_native_spin_unlock(void) +{ + return !is_shared_processor(); +} + +#endif /* _ASM_POWERPC_PARAVIRT_H */ diff --git a/arch/powerpc/include/asm/parport.h b/arch/powerpc/include/asm/parport.h new file mode 100644 index 000000000..8abfb8f7c --- /dev/null +++ b/arch/powerpc/include/asm/parport.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * parport.h: platform-specific PC-style parport initialisation + * + * Copyright (C) 1999, 2000 Tim Waugh <tim@cyberelk.demon.co.uk> + * + * This file should only be included by drivers/parport/parport_pc.c. + */ + +#ifndef _ASM_POWERPC_PARPORT_H +#define _ASM_POWERPC_PARPORT_H +#ifdef __KERNEL__ + +#include <asm/prom.h> + +static int parport_pc_find_nonpci_ports (int autoirq, int autodma) +{ + struct device_node *np; + const u32 *prop; + u32 io1, io2; + int propsize; + int count = 0; + int virq; + + for_each_compatible_node(np, "parallel", "pnpPNP,400") { + prop = of_get_property(np, "reg", &propsize); + if (!prop || propsize > 6*sizeof(u32)) + continue; + io1 = prop[1]; io2 = prop[2]; + + virq = irq_of_parse_and_map(np, 0); + if (!virq) + continue; + + if (parport_pc_probe_port(io1, io2, virq, autodma, NULL, 0) + != NULL) + count++; + } + return count; +} + +#endif /* __KERNEL__ */ +#endif /* !(_ASM_POWERPC_PARPORT_H) */ diff --git a/arch/powerpc/include/asm/pasemi_dma.h b/arch/powerpc/include/asm/pasemi_dma.h new file mode 100644 index 000000000..712a0b321 --- /dev/null +++ b/arch/powerpc/include/asm/pasemi_dma.h @@ -0,0 +1,526 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2006-2008 PA Semi, Inc + * + * Hardware register layout and descriptor formats for the on-board + * DMA engine on PA Semi PWRficient. Used by ethernet, function and security + * drivers. + */ + +#ifndef ASM_PASEMI_DMA_H +#define ASM_PASEMI_DMA_H + +/* status register layout in IOB region, at 0xfb800000 */ +struct pasdma_status { + u64 rx_sta[64]; /* RX channel status */ + u64 tx_sta[20]; /* TX channel status */ +}; + + +/* All these registers live in the PCI configuration space for the DMA PCI + * device. Use the normal PCI config access functions for them. + */ +enum { + PAS_DMA_CAP_TXCH = 0x44, /* Transmit Channel Info */ + PAS_DMA_CAP_RXCH = 0x48, /* Transmit Channel Info */ + PAS_DMA_CAP_IFI = 0x4c, /* Interface Info */ + PAS_DMA_COM_TXCMD = 0x100, /* Transmit Command Register */ + PAS_DMA_COM_TXSTA = 0x104, /* Transmit Status Register */ + PAS_DMA_COM_RXCMD = 0x108, /* Receive Command Register */ + PAS_DMA_COM_RXSTA = 0x10c, /* Receive Status Register */ + PAS_DMA_COM_CFG = 0x114, /* Common config reg */ + PAS_DMA_TXF_SFLG0 = 0x140, /* Set flags */ + PAS_DMA_TXF_SFLG1 = 0x144, /* Set flags */ + PAS_DMA_TXF_CFLG0 = 0x148, /* Set flags */ + PAS_DMA_TXF_CFLG1 = 0x14c, /* Set flags */ +}; + + +#define PAS_DMA_CAP_TXCH_TCHN_M 0x00ff0000 /* # of TX channels */ +#define PAS_DMA_CAP_TXCH_TCHN_S 16 + +#define PAS_DMA_CAP_RXCH_RCHN_M 0x00ff0000 /* # of RX channels */ +#define PAS_DMA_CAP_RXCH_RCHN_S 16 + +#define PAS_DMA_CAP_IFI_IOFF_M 0xff000000 /* Cfg reg for intf pointers */ +#define PAS_DMA_CAP_IFI_IOFF_S 24 +#define PAS_DMA_CAP_IFI_NIN_M 0x00ff0000 /* # of interfaces */ +#define PAS_DMA_CAP_IFI_NIN_S 16 + +#define PAS_DMA_COM_TXCMD_EN 0x00000001 /* enable */ +#define PAS_DMA_COM_TXSTA_ACT 0x00000001 /* active */ +#define PAS_DMA_COM_RXCMD_EN 0x00000001 /* enable */ +#define PAS_DMA_COM_RXSTA_ACT 0x00000001 /* active */ + + +/* Per-interface and per-channel registers */ +#define _PAS_DMA_RXINT_STRIDE 0x20 +#define PAS_DMA_RXINT_RCMDSTA(i) (0x200+(i)*_PAS_DMA_RXINT_STRIDE) +#define PAS_DMA_RXINT_RCMDSTA_EN 0x00000001 +#define PAS_DMA_RXINT_RCMDSTA_ST 0x00000002 +#define PAS_DMA_RXINT_RCMDSTA_MBT 0x00000008 +#define PAS_DMA_RXINT_RCMDSTA_MDR 0x00000010 +#define PAS_DMA_RXINT_RCMDSTA_MOO 0x00000020 +#define PAS_DMA_RXINT_RCMDSTA_MBP 0x00000040 +#define PAS_DMA_RXINT_RCMDSTA_BT 0x00000800 +#define PAS_DMA_RXINT_RCMDSTA_DR 0x00001000 +#define PAS_DMA_RXINT_RCMDSTA_OO 0x00002000 +#define PAS_DMA_RXINT_RCMDSTA_BP 0x00004000 +#define PAS_DMA_RXINT_RCMDSTA_TB 0x00008000 +#define PAS_DMA_RXINT_RCMDSTA_ACT 0x00010000 +#define PAS_DMA_RXINT_RCMDSTA_DROPS_M 0xfffe0000 +#define PAS_DMA_RXINT_RCMDSTA_DROPS_S 17 +#define PAS_DMA_RXINT_CFG(i) (0x204+(i)*_PAS_DMA_RXINT_STRIDE) +#define PAS_DMA_RXINT_CFG_RBP 0x80000000 +#define PAS_DMA_RXINT_CFG_ITRR 0x40000000 +#define PAS_DMA_RXINT_CFG_DHL_M 0x07000000 +#define PAS_DMA_RXINT_CFG_DHL_S 24 +#define PAS_DMA_RXINT_CFG_DHL(x) (((x) << PAS_DMA_RXINT_CFG_DHL_S) & \ + PAS_DMA_RXINT_CFG_DHL_M) +#define PAS_DMA_RXINT_CFG_ITR 0x00400000 +#define PAS_DMA_RXINT_CFG_LW 0x00200000 +#define PAS_DMA_RXINT_CFG_L2 0x00100000 +#define PAS_DMA_RXINT_CFG_HEN 0x00080000 +#define PAS_DMA_RXINT_CFG_WIF 0x00000002 +#define PAS_DMA_RXINT_CFG_WIL 0x00000001 + +#define PAS_DMA_RXINT_INCR(i) (0x210+(i)*_PAS_DMA_RXINT_STRIDE) +#define PAS_DMA_RXINT_INCR_INCR_M 0x0000ffff +#define PAS_DMA_RXINT_INCR_INCR_S 0 +#define PAS_DMA_RXINT_INCR_INCR(x) ((x) & 0x0000ffff) +#define PAS_DMA_RXINT_BASEL(i) (0x218+(i)*_PAS_DMA_RXINT_STRIDE) +#define PAS_DMA_RXINT_BASEL_BRBL(x) ((x) & ~0x3f) +#define PAS_DMA_RXINT_BASEU(i) (0x21c+(i)*_PAS_DMA_RXINT_STRIDE) +#define PAS_DMA_RXINT_BASEU_BRBH(x) ((x) & 0xfff) +#define PAS_DMA_RXINT_BASEU_SIZ_M 0x3fff0000 /* # of cache lines worth of buffer ring */ +#define PAS_DMA_RXINT_BASEU_SIZ_S 16 /* 0 = 16K */ +#define PAS_DMA_RXINT_BASEU_SIZ(x) (((x) << PAS_DMA_RXINT_BASEU_SIZ_S) & \ + PAS_DMA_RXINT_BASEU_SIZ_M) + + +#define _PAS_DMA_TXCHAN_STRIDE 0x20 /* Size per channel */ +#define _PAS_DMA_TXCHAN_TCMDSTA 0x300 /* Command / Status */ +#define _PAS_DMA_TXCHAN_CFG 0x304 /* Configuration */ +#define _PAS_DMA_TXCHAN_DSCRBU 0x308 /* Descriptor BU Allocation */ +#define _PAS_DMA_TXCHAN_INCR 0x310 /* Descriptor increment */ +#define _PAS_DMA_TXCHAN_CNT 0x314 /* Descriptor count/offset */ +#define _PAS_DMA_TXCHAN_BASEL 0x318 /* Descriptor ring base (low) */ +#define _PAS_DMA_TXCHAN_BASEU 0x31c /* (high) */ +#define PAS_DMA_TXCHAN_TCMDSTA(c) (0x300+(c)*_PAS_DMA_TXCHAN_STRIDE) +#define PAS_DMA_TXCHAN_TCMDSTA_EN 0x00000001 /* Enabled */ +#define PAS_DMA_TXCHAN_TCMDSTA_ST 0x00000002 /* Stop interface */ +#define PAS_DMA_TXCHAN_TCMDSTA_ACT 0x00010000 /* Active */ +#define PAS_DMA_TXCHAN_TCMDSTA_SZ 0x00000800 +#define PAS_DMA_TXCHAN_TCMDSTA_DB 0x00000400 +#define PAS_DMA_TXCHAN_TCMDSTA_DE 0x00000200 +#define PAS_DMA_TXCHAN_TCMDSTA_DA 0x00000100 +#define PAS_DMA_TXCHAN_CFG(c) (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE) +#define PAS_DMA_TXCHAN_CFG_TY_IFACE 0x00000000 /* Type = interface */ +#define PAS_DMA_TXCHAN_CFG_TY_COPY 0x00000001 /* Type = copy only */ +#define PAS_DMA_TXCHAN_CFG_TY_FUNC 0x00000002 /* Type = function */ +#define PAS_DMA_TXCHAN_CFG_TY_XOR 0x00000003 /* Type = xor only */ +#define PAS_DMA_TXCHAN_CFG_TATTR_M 0x0000003c +#define PAS_DMA_TXCHAN_CFG_TATTR_S 2 +#define PAS_DMA_TXCHAN_CFG_TATTR(x) (((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \ + PAS_DMA_TXCHAN_CFG_TATTR_M) +#define PAS_DMA_TXCHAN_CFG_LPDQ 0x00000800 +#define PAS_DMA_TXCHAN_CFG_LPSQ 0x00000400 +#define PAS_DMA_TXCHAN_CFG_WT_M 0x000003c0 +#define PAS_DMA_TXCHAN_CFG_WT_S 6 +#define PAS_DMA_TXCHAN_CFG_WT(x) (((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \ + PAS_DMA_TXCHAN_CFG_WT_M) +#define PAS_DMA_TXCHAN_CFG_TRD 0x00010000 /* translate data */ +#define PAS_DMA_TXCHAN_CFG_TRR 0x00008000 /* translate rings */ +#define PAS_DMA_TXCHAN_CFG_UP 0x00004000 /* update tx descr when sent */ +#define PAS_DMA_TXCHAN_CFG_CL 0x00002000 /* Clean last line */ +#define PAS_DMA_TXCHAN_CFG_CF 0x00001000 /* Clean first line */ +#define PAS_DMA_TXCHAN_INCR(c) (0x310+(c)*_PAS_DMA_TXCHAN_STRIDE) +#define PAS_DMA_TXCHAN_BASEL(c) (0x318+(c)*_PAS_DMA_TXCHAN_STRIDE) +#define PAS_DMA_TXCHAN_BASEL_BRBL_M 0xffffffc0 +#define PAS_DMA_TXCHAN_BASEL_BRBL_S 0 +#define PAS_DMA_TXCHAN_BASEL_BRBL(x) (((x) << PAS_DMA_TXCHAN_BASEL_BRBL_S) & \ + PAS_DMA_TXCHAN_BASEL_BRBL_M) +#define PAS_DMA_TXCHAN_BASEU(c) (0x31c+(c)*_PAS_DMA_TXCHAN_STRIDE) +#define PAS_DMA_TXCHAN_BASEU_BRBH_M 0x00000fff +#define PAS_DMA_TXCHAN_BASEU_BRBH_S 0 +#define PAS_DMA_TXCHAN_BASEU_BRBH(x) (((x) << PAS_DMA_TXCHAN_BASEU_BRBH_S) & \ + PAS_DMA_TXCHAN_BASEU_BRBH_M) +/* # of cache lines worth of buffer ring */ +#define PAS_DMA_TXCHAN_BASEU_SIZ_M 0x3fff0000 +#define PAS_DMA_TXCHAN_BASEU_SIZ_S 16 /* 0 = 16K */ +#define PAS_DMA_TXCHAN_BASEU_SIZ(x) (((x) << PAS_DMA_TXCHAN_BASEU_SIZ_S) & \ + PAS_DMA_TXCHAN_BASEU_SIZ_M) + +#define _PAS_DMA_RXCHAN_STRIDE 0x20 /* Size per channel */ +#define _PAS_DMA_RXCHAN_CCMDSTA 0x800 /* Command / Status */ +#define _PAS_DMA_RXCHAN_CFG 0x804 /* Configuration */ +#define _PAS_DMA_RXCHAN_INCR 0x810 /* Descriptor increment */ +#define _PAS_DMA_RXCHAN_CNT 0x814 /* Descriptor count/offset */ +#define _PAS_DMA_RXCHAN_BASEL 0x818 /* Descriptor ring base (low) */ +#define _PAS_DMA_RXCHAN_BASEU 0x81c /* (high) */ +#define PAS_DMA_RXCHAN_CCMDSTA(c) (0x800+(c)*_PAS_DMA_RXCHAN_STRIDE) +#define PAS_DMA_RXCHAN_CCMDSTA_EN 0x00000001 /* Enabled */ +#define PAS_DMA_RXCHAN_CCMDSTA_ST 0x00000002 /* Stop interface */ +#define PAS_DMA_RXCHAN_CCMDSTA_ACT 0x00010000 /* Active */ +#define PAS_DMA_RXCHAN_CCMDSTA_DU 0x00020000 +#define PAS_DMA_RXCHAN_CCMDSTA_OD 0x00002000 +#define PAS_DMA_RXCHAN_CCMDSTA_FD 0x00001000 +#define PAS_DMA_RXCHAN_CCMDSTA_DT 0x00000800 +#define PAS_DMA_RXCHAN_CFG(c) (0x804+(c)*_PAS_DMA_RXCHAN_STRIDE) +#define PAS_DMA_RXCHAN_CFG_CTR 0x00000400 +#define PAS_DMA_RXCHAN_CFG_HBU_M 0x00000380 +#define PAS_DMA_RXCHAN_CFG_HBU_S 7 +#define PAS_DMA_RXCHAN_CFG_HBU(x) (((x) << PAS_DMA_RXCHAN_CFG_HBU_S) & \ + PAS_DMA_RXCHAN_CFG_HBU_M) +#define PAS_DMA_RXCHAN_INCR(c) (0x810+(c)*_PAS_DMA_RXCHAN_STRIDE) +#define PAS_DMA_RXCHAN_BASEL(c) (0x818+(c)*_PAS_DMA_RXCHAN_STRIDE) +#define PAS_DMA_RXCHAN_BASEL_BRBL_M 0xffffffc0 +#define PAS_DMA_RXCHAN_BASEL_BRBL_S 0 +#define PAS_DMA_RXCHAN_BASEL_BRBL(x) (((x) << PAS_DMA_RXCHAN_BASEL_BRBL_S) & \ + PAS_DMA_RXCHAN_BASEL_BRBL_M) +#define PAS_DMA_RXCHAN_BASEU(c) (0x81c+(c)*_PAS_DMA_RXCHAN_STRIDE) +#define PAS_DMA_RXCHAN_BASEU_BRBH_M 0x00000fff +#define PAS_DMA_RXCHAN_BASEU_BRBH_S 0 +#define PAS_DMA_RXCHAN_BASEU_BRBH(x) (((x) << PAS_DMA_RXCHAN_BASEU_BRBH_S) & \ + PAS_DMA_RXCHAN_BASEU_BRBH_M) +/* # of cache lines worth of buffer ring */ +#define PAS_DMA_RXCHAN_BASEU_SIZ_M 0x3fff0000 +#define PAS_DMA_RXCHAN_BASEU_SIZ_S 16 /* 0 = 16K */ +#define PAS_DMA_RXCHAN_BASEU_SIZ(x) (((x) << PAS_DMA_RXCHAN_BASEU_SIZ_S) & \ + PAS_DMA_RXCHAN_BASEU_SIZ_M) + +#define PAS_STATUS_PCNT_M 0x000000000000ffffull +#define PAS_STATUS_PCNT_S 0 +#define PAS_STATUS_DCNT_M 0x00000000ffff0000ull +#define PAS_STATUS_DCNT_S 16 +#define PAS_STATUS_BPCNT_M 0x0000ffff00000000ull +#define PAS_STATUS_BPCNT_S 32 +#define PAS_STATUS_CAUSE_M 0xf000000000000000ull +#define PAS_STATUS_TIMER 0x1000000000000000ull +#define PAS_STATUS_ERROR 0x2000000000000000ull +#define PAS_STATUS_SOFT 0x4000000000000000ull +#define PAS_STATUS_INT 0x8000000000000000ull + +#define PAS_IOB_COM_PKTHDRCNT 0x120 +#define PAS_IOB_COM_PKTHDRCNT_PKTHDR1_M 0x0fff0000 +#define PAS_IOB_COM_PKTHDRCNT_PKTHDR1_S 16 +#define PAS_IOB_COM_PKTHDRCNT_PKTHDR0_M 0x00000fff +#define PAS_IOB_COM_PKTHDRCNT_PKTHDR0_S 0 + +#define PAS_IOB_DMA_RXCH_CFG(i) (0x1100 + (i)*4) +#define PAS_IOB_DMA_RXCH_CFG_CNTTH_M 0x00000fff +#define PAS_IOB_DMA_RXCH_CFG_CNTTH_S 0 +#define PAS_IOB_DMA_RXCH_CFG_CNTTH(x) (((x) << PAS_IOB_DMA_RXCH_CFG_CNTTH_S) & \ + PAS_IOB_DMA_RXCH_CFG_CNTTH_M) +#define PAS_IOB_DMA_TXCH_CFG(i) (0x1200 + (i)*4) +#define PAS_IOB_DMA_TXCH_CFG_CNTTH_M 0x00000fff +#define PAS_IOB_DMA_TXCH_CFG_CNTTH_S 0 +#define PAS_IOB_DMA_TXCH_CFG_CNTTH(x) (((x) << PAS_IOB_DMA_TXCH_CFG_CNTTH_S) & \ + PAS_IOB_DMA_TXCH_CFG_CNTTH_M) +#define PAS_IOB_DMA_RXCH_STAT(i) (0x1300 + (i)*4) +#define PAS_IOB_DMA_RXCH_STAT_INTGEN 0x00001000 +#define PAS_IOB_DMA_RXCH_STAT_CNTDEL_M 0x00000fff +#define PAS_IOB_DMA_RXCH_STAT_CNTDEL_S 0 +#define PAS_IOB_DMA_RXCH_STAT_CNTDEL(x) (((x) << PAS_IOB_DMA_RXCH_STAT_CNTDEL_S) &\ + PAS_IOB_DMA_RXCH_STAT_CNTDEL_M) +#define PAS_IOB_DMA_TXCH_STAT(i) (0x1400 + (i)*4) +#define PAS_IOB_DMA_TXCH_STAT_INTGEN 0x00001000 +#define PAS_IOB_DMA_TXCH_STAT_CNTDEL_M 0x00000fff +#define PAS_IOB_DMA_TXCH_STAT_CNTDEL_S 0 +#define PAS_IOB_DMA_TXCH_STAT_CNTDEL(x) (((x) << PAS_IOB_DMA_TXCH_STAT_CNTDEL_S) &\ + PAS_IOB_DMA_TXCH_STAT_CNTDEL_M) +#define PAS_IOB_DMA_RXCH_RESET(i) (0x1500 + (i)*4) +#define PAS_IOB_DMA_RXCH_RESET_PCNT_M 0xffff0000 +#define PAS_IOB_DMA_RXCH_RESET_PCNT_S 16 +#define PAS_IOB_DMA_RXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_RXCH_RESET_PCNT_S) & \ + PAS_IOB_DMA_RXCH_RESET_PCNT_M) +#define PAS_IOB_DMA_RXCH_RESET_PCNTRST 0x00000020 +#define PAS_IOB_DMA_RXCH_RESET_DCNTRST 0x00000010 +#define PAS_IOB_DMA_RXCH_RESET_TINTC 0x00000008 +#define PAS_IOB_DMA_RXCH_RESET_DINTC 0x00000004 +#define PAS_IOB_DMA_RXCH_RESET_SINTC 0x00000002 +#define PAS_IOB_DMA_RXCH_RESET_PINTC 0x00000001 +#define PAS_IOB_DMA_TXCH_RESET(i) (0x1600 + (i)*4) +#define PAS_IOB_DMA_TXCH_RESET_PCNT_M 0xffff0000 +#define PAS_IOB_DMA_TXCH_RESET_PCNT_S 16 +#define PAS_IOB_DMA_TXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_TXCH_RESET_PCNT_S) & \ + PAS_IOB_DMA_TXCH_RESET_PCNT_M) +#define PAS_IOB_DMA_TXCH_RESET_PCNTRST 0x00000020 +#define PAS_IOB_DMA_TXCH_RESET_DCNTRST 0x00000010 +#define PAS_IOB_DMA_TXCH_RESET_TINTC 0x00000008 +#define PAS_IOB_DMA_TXCH_RESET_DINTC 0x00000004 +#define PAS_IOB_DMA_TXCH_RESET_SINTC 0x00000002 +#define PAS_IOB_DMA_TXCH_RESET_PINTC 0x00000001 + +#define PAS_IOB_DMA_COM_TIMEOUTCFG 0x1700 +#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M 0x00ffffff +#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S 0 +#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(x) (((x) << PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S) & \ + PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M) + +/* Transmit descriptor fields */ +#define XCT_MACTX_T 0x8000000000000000ull +#define XCT_MACTX_ST 0x4000000000000000ull +#define XCT_MACTX_NORES 0x0000000000000000ull +#define XCT_MACTX_8BRES 0x1000000000000000ull +#define XCT_MACTX_24BRES 0x2000000000000000ull +#define XCT_MACTX_40BRES 0x3000000000000000ull +#define XCT_MACTX_I 0x0800000000000000ull +#define XCT_MACTX_O 0x0400000000000000ull +#define XCT_MACTX_E 0x0200000000000000ull +#define XCT_MACTX_VLAN_M 0x0180000000000000ull +#define XCT_MACTX_VLAN_NOP 0x0000000000000000ull +#define XCT_MACTX_VLAN_REMOVE 0x0080000000000000ull +#define XCT_MACTX_VLAN_INSERT 0x0100000000000000ull +#define XCT_MACTX_VLAN_REPLACE 0x0180000000000000ull +#define XCT_MACTX_CRC_M 0x0060000000000000ull +#define XCT_MACTX_CRC_NOP 0x0000000000000000ull +#define XCT_MACTX_CRC_INSERT 0x0020000000000000ull +#define XCT_MACTX_CRC_PAD 0x0040000000000000ull +#define XCT_MACTX_CRC_REPLACE 0x0060000000000000ull +#define XCT_MACTX_SS 0x0010000000000000ull +#define XCT_MACTX_LLEN_M 0x00007fff00000000ull +#define XCT_MACTX_LLEN_S 32ull +#define XCT_MACTX_LLEN(x) ((((long)(x)) << XCT_MACTX_LLEN_S) & \ + XCT_MACTX_LLEN_M) +#define XCT_MACTX_IPH_M 0x00000000f8000000ull +#define XCT_MACTX_IPH_S 27ull +#define XCT_MACTX_IPH(x) ((((long)(x)) << XCT_MACTX_IPH_S) & \ + XCT_MACTX_IPH_M) +#define XCT_MACTX_IPO_M 0x0000000007c00000ull +#define XCT_MACTX_IPO_S 22ull +#define XCT_MACTX_IPO(x) ((((long)(x)) << XCT_MACTX_IPO_S) & \ + XCT_MACTX_IPO_M) +#define XCT_MACTX_CSUM_M 0x0000000000000060ull +#define XCT_MACTX_CSUM_NOP 0x0000000000000000ull +#define XCT_MACTX_CSUM_TCP 0x0000000000000040ull +#define XCT_MACTX_CSUM_UDP 0x0000000000000060ull +#define XCT_MACTX_V6 0x0000000000000010ull +#define XCT_MACTX_C 0x0000000000000004ull +#define XCT_MACTX_AL2 0x0000000000000002ull + +/* Receive descriptor fields */ +#define XCT_MACRX_T 0x8000000000000000ull +#define XCT_MACRX_ST 0x4000000000000000ull +#define XCT_MACRX_RR_M 0x3000000000000000ull +#define XCT_MACRX_RR_NORES 0x0000000000000000ull +#define XCT_MACRX_RR_8BRES 0x1000000000000000ull +#define XCT_MACRX_O 0x0400000000000000ull +#define XCT_MACRX_E 0x0200000000000000ull +#define XCT_MACRX_FF 0x0100000000000000ull +#define XCT_MACRX_PF 0x0080000000000000ull +#define XCT_MACRX_OB 0x0040000000000000ull +#define XCT_MACRX_OD 0x0020000000000000ull +#define XCT_MACRX_FS 0x0010000000000000ull +#define XCT_MACRX_NB_M 0x000fc00000000000ull +#define XCT_MACRX_NB_S 46ULL +#define XCT_MACRX_NB(x) ((((long)(x)) << XCT_MACRX_NB_S) & \ + XCT_MACRX_NB_M) +#define XCT_MACRX_LLEN_M 0x00003fff00000000ull +#define XCT_MACRX_LLEN_S 32ULL +#define XCT_MACRX_LLEN(x) ((((long)(x)) << XCT_MACRX_LLEN_S) & \ + XCT_MACRX_LLEN_M) +#define XCT_MACRX_CRC 0x0000000080000000ull +#define XCT_MACRX_LEN_M 0x0000000060000000ull +#define XCT_MACRX_LEN_TOOSHORT 0x0000000020000000ull +#define XCT_MACRX_LEN_BELOWMIN 0x0000000040000000ull +#define XCT_MACRX_LEN_TRUNC 0x0000000060000000ull +#define XCT_MACRX_CAST_M 0x0000000018000000ull +#define XCT_MACRX_CAST_UNI 0x0000000000000000ull +#define XCT_MACRX_CAST_MULTI 0x0000000008000000ull +#define XCT_MACRX_CAST_BROAD 0x0000000010000000ull +#define XCT_MACRX_CAST_PAUSE 0x0000000018000000ull +#define XCT_MACRX_VLC_M 0x0000000006000000ull +#define XCT_MACRX_FM 0x0000000001000000ull +#define XCT_MACRX_HTY_M 0x0000000000c00000ull +#define XCT_MACRX_HTY_IPV4_OK 0x0000000000000000ull +#define XCT_MACRX_HTY_IPV6 0x0000000000400000ull +#define XCT_MACRX_HTY_IPV4_BAD 0x0000000000800000ull +#define XCT_MACRX_HTY_NONIP 0x0000000000c00000ull +#define XCT_MACRX_IPP_M 0x00000000003f0000ull +#define XCT_MACRX_IPP_S 16 +#define XCT_MACRX_CSUM_M 0x000000000000ffffull +#define XCT_MACRX_CSUM_S 0 + +#define XCT_PTR_T 0x8000000000000000ull +#define XCT_PTR_LEN_M 0x7ffff00000000000ull +#define XCT_PTR_LEN_S 44 +#define XCT_PTR_LEN(x) ((((long)(x)) << XCT_PTR_LEN_S) & \ + XCT_PTR_LEN_M) +#define XCT_PTR_ADDR_M 0x00000fffffffffffull +#define XCT_PTR_ADDR_S 0 +#define XCT_PTR_ADDR(x) ((((long)(x)) << XCT_PTR_ADDR_S) & \ + XCT_PTR_ADDR_M) + +/* Receive interface 8byte result fields */ +#define XCT_RXRES_8B_L4O_M 0xff00000000000000ull +#define XCT_RXRES_8B_L4O_S 56 +#define XCT_RXRES_8B_RULE_M 0x00ffff0000000000ull +#define XCT_RXRES_8B_RULE_S 40 +#define XCT_RXRES_8B_EVAL_M 0x000000ffff000000ull +#define XCT_RXRES_8B_EVAL_S 24 +#define XCT_RXRES_8B_HTYPE_M 0x0000000000f00000ull +#define XCT_RXRES_8B_HASH_M 0x00000000000fffffull +#define XCT_RXRES_8B_HASH_S 0 + +/* Receive interface buffer fields */ +#define XCT_RXB_LEN_M 0x0ffff00000000000ull +#define XCT_RXB_LEN_S 44 +#define XCT_RXB_LEN(x) ((((long)(x)) << XCT_RXB_LEN_S) & \ + XCT_RXB_LEN_M) +#define XCT_RXB_ADDR_M 0x00000fffffffffffull +#define XCT_RXB_ADDR_S 0 +#define XCT_RXB_ADDR(x) ((((long)(x)) << XCT_RXB_ADDR_S) & \ + XCT_RXB_ADDR_M) + +/* Copy descriptor fields */ +#define XCT_COPY_T 0x8000000000000000ull +#define XCT_COPY_ST 0x4000000000000000ull +#define XCT_COPY_RR_M 0x3000000000000000ull +#define XCT_COPY_RR_NORES 0x0000000000000000ull +#define XCT_COPY_RR_8BRES 0x1000000000000000ull +#define XCT_COPY_RR_24BRES 0x2000000000000000ull +#define XCT_COPY_RR_40BRES 0x3000000000000000ull +#define XCT_COPY_I 0x0800000000000000ull +#define XCT_COPY_O 0x0400000000000000ull +#define XCT_COPY_E 0x0200000000000000ull +#define XCT_COPY_STY_ZERO 0x01c0000000000000ull +#define XCT_COPY_DTY_PREF 0x0038000000000000ull +#define XCT_COPY_LLEN_M 0x0007ffff00000000ull +#define XCT_COPY_LLEN_S 32 +#define XCT_COPY_LLEN(x) ((((long)(x)) << XCT_COPY_LLEN_S) & \ + XCT_COPY_LLEN_M) +#define XCT_COPY_SE 0x0000000000000001ull + +/* Function descriptor fields */ +#define XCT_FUN_T 0x8000000000000000ull +#define XCT_FUN_ST 0x4000000000000000ull +#define XCT_FUN_RR_M 0x3000000000000000ull +#define XCT_FUN_RR_NORES 0x0000000000000000ull +#define XCT_FUN_RR_8BRES 0x1000000000000000ull +#define XCT_FUN_RR_24BRES 0x2000000000000000ull +#define XCT_FUN_RR_40BRES 0x3000000000000000ull +#define XCT_FUN_I 0x0800000000000000ull +#define XCT_FUN_O 0x0400000000000000ull +#define XCT_FUN_E 0x0200000000000000ull +#define XCT_FUN_FUN_M 0x01c0000000000000ull +#define XCT_FUN_FUN_S 54 +#define XCT_FUN_FUN(x) ((((long)(x)) << XCT_FUN_FUN_S) & XCT_FUN_FUN_M) +#define XCT_FUN_CRM_M 0x0038000000000000ull +#define XCT_FUN_CRM_NOP 0x0000000000000000ull +#define XCT_FUN_CRM_SIG 0x0008000000000000ull +#define XCT_FUN_LLEN_M 0x0007ffff00000000ull +#define XCT_FUN_LLEN_S 32 +#define XCT_FUN_LLEN(x) ((((long)(x)) << XCT_FUN_LLEN_S) & XCT_FUN_LLEN_M) +#define XCT_FUN_SHL_M 0x00000000f8000000ull +#define XCT_FUN_SHL_S 27 +#define XCT_FUN_SHL(x) ((((long)(x)) << XCT_FUN_SHL_S) & XCT_FUN_SHL_M) +#define XCT_FUN_CHL_M 0x0000000007c00000ull +#define XCT_FUN_HSZ_M 0x00000000003c0000ull +#define XCT_FUN_ALG_M 0x0000000000038000ull +#define XCT_FUN_HP 0x0000000000004000ull +#define XCT_FUN_BCM_M 0x0000000000003800ull +#define XCT_FUN_BCP_M 0x0000000000000600ull +#define XCT_FUN_SIG_M 0x00000000000001f0ull +#define XCT_FUN_SIG_TCP4 0x0000000000000140ull +#define XCT_FUN_SIG_TCP6 0x0000000000000150ull +#define XCT_FUN_SIG_UDP4 0x0000000000000160ull +#define XCT_FUN_SIG_UDP6 0x0000000000000170ull +#define XCT_FUN_A 0x0000000000000008ull +#define XCT_FUN_C 0x0000000000000004ull +#define XCT_FUN_AL2 0x0000000000000002ull +#define XCT_FUN_SE 0x0000000000000001ull + +/* Function descriptor 8byte result fields */ +#define XCT_FUNRES_8B_CS_M 0x0000ffff00000000ull +#define XCT_FUNRES_8B_CS_S 32 +#define XCT_FUNRES_8B_CRC_M 0x00000000ffffffffull +#define XCT_FUNRES_8B_CRC_S 0 + +/* Control descriptor fields */ +#define CTRL_CMD_T 0x8000000000000000ull +#define CTRL_CMD_META_EVT 0x2000000000000000ull +#define CTRL_CMD_O 0x0400000000000000ull +#define CTRL_CMD_ETYPE_M 0x0038000000000000ull +#define CTRL_CMD_ETYPE_EXT 0x0000000000000000ull +#define CTRL_CMD_ETYPE_WSET 0x0020000000000000ull +#define CTRL_CMD_ETYPE_WCLR 0x0028000000000000ull +#define CTRL_CMD_ETYPE_SET 0x0030000000000000ull +#define CTRL_CMD_ETYPE_CLR 0x0038000000000000ull +#define CTRL_CMD_REG_M 0x000000000000007full +#define CTRL_CMD_REG_S 0 +#define CTRL_CMD_REG(x) ((((long)(x)) << CTRL_CMD_REG_S) & \ + CTRL_CMD_REG_M) + + + +/* Prototypes for the shared DMA functions in the platform code. */ + +/* DMA TX Channel type. Right now only limitations used are event types 0/1, + * for event-triggered DMA transactions. + */ + +enum pasemi_dmachan_type { + RXCHAN = 0, /* Any RX chan */ + TXCHAN = 1, /* Any TX chan */ + TXCHAN_EVT0 = 0x1001, /* TX chan in event class 0 (chan 0-9) */ + TXCHAN_EVT1 = 0x2001, /* TX chan in event class 1 (chan 10-19) */ +}; + +struct pasemi_dmachan { + int chno; /* Channel number */ + enum pasemi_dmachan_type chan_type; /* TX / RX */ + u64 *status; /* Ptr to cacheable status */ + int irq; /* IRQ used by channel */ + unsigned int ring_size; /* size of allocated ring */ + dma_addr_t ring_dma; /* DMA address for ring */ + u64 *ring_virt; /* Virt address for ring */ + void *priv; /* Ptr to start of client struct */ +}; + +/* Read/write the different registers in the I/O Bridge, Ethernet + * and DMA Controller + */ +extern unsigned int pasemi_read_iob_reg(unsigned int reg); +extern void pasemi_write_iob_reg(unsigned int reg, unsigned int val); + +extern unsigned int pasemi_read_mac_reg(int intf, unsigned int reg); +extern void pasemi_write_mac_reg(int intf, unsigned int reg, unsigned int val); + +extern unsigned int pasemi_read_dma_reg(unsigned int reg); +extern void pasemi_write_dma_reg(unsigned int reg, unsigned int val); + +/* Channel management routines */ + +extern void *pasemi_dma_alloc_chan(enum pasemi_dmachan_type type, + int total_size, int offset); +extern void pasemi_dma_free_chan(struct pasemi_dmachan *chan); + +extern void pasemi_dma_start_chan(const struct pasemi_dmachan *chan, + const u32 cmdsta); +extern int pasemi_dma_stop_chan(const struct pasemi_dmachan *chan); + +/* Common routines to allocate rings and buffers */ + +extern int pasemi_dma_alloc_ring(struct pasemi_dmachan *chan, int ring_size); +extern void pasemi_dma_free_ring(struct pasemi_dmachan *chan); + +extern void *pasemi_dma_alloc_buf(struct pasemi_dmachan *chan, int size, + dma_addr_t *handle); +extern void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size, + dma_addr_t *handle); + +/* Routines to allocate flags (events) for channel synchronization */ +extern int pasemi_dma_alloc_flag(void); +extern void pasemi_dma_free_flag(int flag); +extern void pasemi_dma_set_flag(int flag); +extern void pasemi_dma_clear_flag(int flag); + +/* Routines to allocate function engines */ +extern int pasemi_dma_alloc_fun(void); +extern void pasemi_dma_free_fun(int fun); + +/* Initialize the library, must be called before any other functions */ +extern int pasemi_dma_init(void); + +#endif /* ASM_PASEMI_DMA_H */ diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h new file mode 100644 index 000000000..d2a2a14e5 --- /dev/null +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -0,0 +1,298 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_PCI_BRIDGE_H +#define _ASM_POWERPC_PCI_BRIDGE_H +#ifdef __KERNEL__ +/* + */ +#include <linux/pci.h> +#include <linux/list.h> +#include <linux/ioport.h> +#include <linux/numa.h> + +struct device_node; + +/* + * PCI controller operations + */ +struct pci_controller_ops { + void (*dma_dev_setup)(struct pci_dev *pdev); + void (*dma_bus_setup)(struct pci_bus *bus); + bool (*iommu_bypass_supported)(struct pci_dev *pdev, + u64 mask); + + int (*probe_mode)(struct pci_bus *bus); + + /* Called when pci_enable_device() is called. Returns true to + * allow assignment/enabling of the device. */ + bool (*enable_device_hook)(struct pci_dev *pdev); + + void (*disable_device)(struct pci_dev *pdev); + + void (*release_device)(struct pci_dev *pdev); + + /* Called during PCI resource reassignment */ + resource_size_t (*window_alignment)(struct pci_bus *bus, + unsigned long type); + void (*setup_bridge)(struct pci_bus *bus, + unsigned long type); + void (*reset_secondary_bus)(struct pci_dev *pdev); + +#ifdef CONFIG_PCI_MSI + int (*setup_msi_irqs)(struct pci_dev *pdev, + int nvec, int type); + void (*teardown_msi_irqs)(struct pci_dev *pdev); +#endif + + void (*shutdown)(struct pci_controller *hose); +}; + +/* + * Structure of a PCI controller (host bridge) + */ +struct pci_controller { + struct pci_bus *bus; + char is_dynamic; +#ifdef CONFIG_PPC64 + int node; +#endif + struct device_node *dn; + struct list_head list_node; + struct device *parent; + + int first_busno; + int last_busno; + int self_busno; + struct resource busn; + + void __iomem *io_base_virt; +#ifdef CONFIG_PPC64 + void __iomem *io_base_alloc; +#endif + resource_size_t io_base_phys; + resource_size_t pci_io_size; + + /* Some machines have a special region to forward the ISA + * "memory" cycles such as VGA memory regions. Left to 0 + * if unsupported + */ + resource_size_t isa_mem_phys; + resource_size_t isa_mem_size; + + struct pci_controller_ops controller_ops; + struct pci_ops *ops; + unsigned int __iomem *cfg_addr; + void __iomem *cfg_data; + + /* + * Used for variants of PCI indirect handling and possible quirks: + * SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1 + * EXT_REG - provides access to PCI-e extended registers + * SURPRESS_PRIMARY_BUS - we suppress the setting of PCI_PRIMARY_BUS + * on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS + * to determine which bus number to match on when generating type0 + * config cycles + * NO_PCIE_LINK - the Freescale PCI-e controllers have issues with + * hanging if we don't have link and try to do config cycles to + * anything but the PHB. Only allow talking to the PHB if this is + * set. + * BIG_ENDIAN - cfg_addr is a big endian register + * BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs on + * the PLB4. Effectively disable MRM commands by setting this. + * FSL_CFG_REG_LINK - Freescale controller version in which the PCIe + * link status is in a RC PCIe cfg register (vs being a SoC register) + */ +#define PPC_INDIRECT_TYPE_SET_CFG_TYPE 0x00000001 +#define PPC_INDIRECT_TYPE_EXT_REG 0x00000002 +#define PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS 0x00000004 +#define PPC_INDIRECT_TYPE_NO_PCIE_LINK 0x00000008 +#define PPC_INDIRECT_TYPE_BIG_ENDIAN 0x00000010 +#define PPC_INDIRECT_TYPE_BROKEN_MRM 0x00000020 +#define PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK 0x00000040 + u32 indirect_type; + /* Currently, we limit ourselves to 1 IO range and 3 mem + * ranges since the common pci_bus structure can't handle more + */ + struct resource io_resource; + struct resource mem_resources[3]; + resource_size_t mem_offset[3]; + int global_number; /* PCI domain number */ + + resource_size_t dma_window_base_cur; + resource_size_t dma_window_size; + +#ifdef CONFIG_PPC64 + unsigned long buid; + struct pci_dn *pci_data; +#endif /* CONFIG_PPC64 */ + + void *private_data; + struct npu *npu; +}; + +/* These are used for config access before all the PCI probing + has been done. */ +extern int early_read_config_byte(struct pci_controller *hose, int bus, + int dev_fn, int where, u8 *val); +extern int early_read_config_word(struct pci_controller *hose, int bus, + int dev_fn, int where, u16 *val); +extern int early_read_config_dword(struct pci_controller *hose, int bus, + int dev_fn, int where, u32 *val); +extern int early_write_config_byte(struct pci_controller *hose, int bus, + int dev_fn, int where, u8 val); +extern int early_write_config_word(struct pci_controller *hose, int bus, + int dev_fn, int where, u16 val); +extern int early_write_config_dword(struct pci_controller *hose, int bus, + int dev_fn, int where, u32 val); + +extern int early_find_capability(struct pci_controller *hose, int bus, + int dev_fn, int cap); + +extern void setup_indirect_pci(struct pci_controller* hose, + resource_size_t cfg_addr, + resource_size_t cfg_data, u32 flags); + +extern int indirect_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val); + +extern int __indirect_read_config(struct pci_controller *hose, + unsigned char bus_number, unsigned int devfn, + int offset, int len, u32 *val); + +extern int indirect_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val); + +static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) +{ + return bus->sysdata; +} + +#ifndef CONFIG_PPC64 + +extern int pci_device_from_OF_node(struct device_node *node, + u8 *bus, u8 *devfn); +extern void pci_create_OF_bus_map(void); + +#else /* CONFIG_PPC64 */ + +/* + * PCI stuff, for nodes representing PCI devices, pointed to + * by device_node->data. + */ +struct iommu_table; + +struct pci_dn { + int flags; +#define PCI_DN_FLAG_IOV_VF 0x01 +#define PCI_DN_FLAG_DEAD 0x02 /* Device has been hot-removed */ + + int busno; /* pci bus number */ + int devfn; /* pci device and function number */ + int vendor_id; /* Vendor ID */ + int device_id; /* Device ID */ + int class_code; /* Device class code */ + + struct pci_dn *parent; + struct pci_controller *phb; /* for pci devices */ + struct iommu_table_group *table_group; /* for phb's or bridges */ + + int pci_ext_config_space; /* for pci devices */ +#ifdef CONFIG_EEH + struct eeh_dev *edev; /* eeh device */ +#endif +#define IODA_INVALID_PE 0xFFFFFFFF + unsigned int pe_number; +#ifdef CONFIG_PCI_IOV + u16 vfs_expanded; /* number of VFs IOV BAR expanded */ + u16 num_vfs; /* number of VFs enabled*/ + unsigned int *pe_num_map; /* PE# for the first VF PE or array */ + bool m64_single_mode; /* Use M64 BAR in Single Mode */ +#define IODA_INVALID_M64 (-1) + int (*m64_map)[PCI_SRIOV_NUM_BARS]; /* Only used on powernv */ + int last_allow_rc; /* Only used on pseries */ +#endif /* CONFIG_PCI_IOV */ + int mps; /* Maximum Payload Size */ + struct list_head child_list; + struct list_head list; + struct resource holes[PCI_SRIOV_NUM_BARS]; +}; + +/* Get the pointer to a device_node's pci_dn */ +#define PCI_DN(dn) ((struct pci_dn *) (dn)->data) + +extern struct pci_dn *pci_get_pdn_by_devfn(struct pci_bus *bus, + int devfn); +extern struct pci_dn *pci_get_pdn(struct pci_dev *pdev); +extern struct pci_dn *pci_add_device_node_info(struct pci_controller *hose, + struct device_node *dn); +extern void pci_remove_device_node_info(struct device_node *dn); + +#ifdef CONFIG_PCI_IOV +struct pci_dn *add_sriov_vf_pdns(struct pci_dev *pdev); +void remove_sriov_vf_pdns(struct pci_dev *pdev); +#endif + +static inline int pci_device_from_OF_node(struct device_node *np, + u8 *bus, u8 *devfn) +{ + if (!PCI_DN(np)) + return -ENODEV; + *bus = PCI_DN(np)->busno; + *devfn = PCI_DN(np)->devfn; + return 0; +} + +#if defined(CONFIG_EEH) +static inline struct eeh_dev *pdn_to_eeh_dev(struct pci_dn *pdn) +{ + return pdn ? pdn->edev : NULL; +} +#else +#define pdn_to_eeh_dev(x) (NULL) +#endif + +/** Find the bus corresponding to the indicated device node */ +extern struct pci_bus *pci_find_bus_by_node(struct device_node *dn); + +/** Remove all of the PCI devices under this bus */ +extern void pci_hp_remove_devices(struct pci_bus *bus); + +/** Discover new pci devices under this bus, and add them */ +extern void pci_hp_add_devices(struct pci_bus *bus); + +extern int pcibios_unmap_io_space(struct pci_bus *bus); +extern int pcibios_map_io_space(struct pci_bus *bus); + +#ifdef CONFIG_NUMA +#define PHB_SET_NODE(PHB, NODE) ((PHB)->node = (NODE)) +#else +#define PHB_SET_NODE(PHB, NODE) ((PHB)->node = NUMA_NO_NODE) +#endif + +#endif /* CONFIG_PPC64 */ + +/* Get the PCI host controller for an OF device */ +extern struct pci_controller *pci_find_hose_for_OF_device( + struct device_node* node); + +extern struct pci_controller *pci_find_controller_for_domain(int domain_nr); + +/* Fill up host controller resources from the OF node */ +extern void pci_process_bridge_OF_ranges(struct pci_controller *hose, + struct device_node *dev, int primary); + +/* Allocate & free a PCI host bridge structure */ +extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev); +extern void pcibios_free_controller(struct pci_controller *phb); +extern void pcibios_free_controller_deferred(struct pci_host_bridge *bridge); + +#ifdef CONFIG_PCI +extern int pcibios_vaddr_is_ioport(void __iomem *address); +#else +static inline int pcibios_vaddr_is_ioport(void __iomem *address) +{ + return 0; +} +#endif /* CONFIG_PCI */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PCI_BRIDGE_H */ diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h new file mode 100644 index 000000000..6436f0b41 --- /dev/null +++ b/arch/powerpc/include/asm/pci.h @@ -0,0 +1,129 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef __ASM_POWERPC_PCI_H +#define __ASM_POWERPC_PCI_H +#ifdef __KERNEL__ + +/* + */ + +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/dma-map-ops.h> +#include <linux/scatterlist.h> + +#include <asm/machdep.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> + +/* Return values for pci_controller_ops.probe_mode function */ +#define PCI_PROBE_NONE -1 /* Don't look at this bus at all */ +#define PCI_PROBE_NORMAL 0 /* Do normal PCI probing */ +#define PCI_PROBE_DEVTREE 1 /* Instantiate from device tree */ + +#define PCIBIOS_MIN_IO 0x1000 +#define PCIBIOS_MIN_MEM 0x10000000 + +/* Values for the `which' argument to sys_pciconfig_iobase syscall. */ +#define IOBASE_BRIDGE_NUMBER 0 +#define IOBASE_MEMORY 1 +#define IOBASE_IO 2 +#define IOBASE_ISA_IO 3 +#define IOBASE_ISA_MEM 4 + +/* + * Set this to 1 if you want the kernel to re-assign all PCI + * bus numbers (don't do that on ppc64 yet !) + */ +#define pcibios_assign_all_busses() \ + (pci_has_flag(PCI_REASSIGN_ALL_BUS)) + +#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + if (ppc_md.pci_get_legacy_ide_irq) + return ppc_md.pci_get_legacy_ide_irq(dev, channel); + return channel ? 15 : 14; +} + +#ifdef CONFIG_PCI +extern void set_pci_dma_ops(const struct dma_map_ops *dma_ops); +#else /* CONFIG_PCI */ +#define set_pci_dma_ops(d) +#endif + +#ifdef CONFIG_PPC64 + +/* + * We want to avoid touching the cacheline size or MWI bit. + * pSeries firmware sets the cacheline size (which is not the cpu cacheline + * size in all cases) and hardware treats MWI the same as memory write. + */ +#define PCI_DISABLE_MWI + +#endif /* CONFIG_PPC64 */ + +extern int pci_domain_nr(struct pci_bus *bus); + +/* Decide whether to display the domain number in /proc */ +extern int pci_proc_domain(struct pci_bus *bus); + +struct vm_area_struct; + +/* Tell PCI code what kind of PCI resource mappings we support */ +#define HAVE_PCI_MMAP 1 +#define ARCH_GENERIC_PCI_MMAP_RESOURCE 1 +#define arch_can_pci_mmap_io() 1 +#define arch_can_pci_mmap_wc() 1 + +extern int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, + size_t count); +extern int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, + size_t count); +extern int pci_mmap_legacy_page_range(struct pci_bus *bus, + struct vm_area_struct *vma, + enum pci_mmap_state mmap_state); + +#define HAVE_PCI_LEGACY 1 + +extern void pcibios_claim_one_bus(struct pci_bus *b); + +extern void pcibios_finish_adding_to_bus(struct pci_bus *bus); + +extern void pcibios_resource_survey(void); + +extern struct pci_controller *init_phb_dynamic(struct device_node *dn); +extern int remove_phb_dynamic(struct pci_controller *phb); + +extern struct pci_dev *of_create_pci_dev(struct device_node *node, + struct pci_bus *bus, int devfn); + +extern unsigned int pci_parse_of_flags(u32 addr0, int bridge); + +extern void of_scan_pci_bridge(struct pci_dev *dev); + +extern void of_scan_bus(struct device_node *node, struct pci_bus *bus); +extern void of_rescan_bus(struct device_node *node, struct pci_bus *bus); + +struct file; +extern pgprot_t pci_phys_mem_access_prot(struct file *file, + unsigned long pfn, + unsigned long size, + pgprot_t prot); + +extern resource_size_t pcibios_io_space_offset(struct pci_controller *hose); +extern void pcibios_setup_bus_self(struct pci_bus *bus); +extern void pcibios_setup_phb_io_space(struct pci_controller *hose); +extern void pcibios_scan_phb(struct pci_controller *hose); + +#endif /* __KERNEL__ */ + +extern struct pci_dev *pnv_pci_get_gpu_dev(struct pci_dev *npdev); +extern struct pci_dev *pnv_pci_get_npu_dev(struct pci_dev *gpdev, int index); +extern int pnv_npu2_init(struct pci_controller *hose); +extern int pnv_npu2_map_lpar_dev(struct pci_dev *gpdev, unsigned int lparid, + unsigned long msr); +extern int pnv_npu2_unmap_lpar_dev(struct pci_dev *gpdev); + +#endif /* __ASM_POWERPC_PCI_H */ diff --git a/arch/powerpc/include/asm/percpu.h b/arch/powerpc/include/asm/percpu.h new file mode 100644 index 000000000..8e5b7d0b8 --- /dev/null +++ b/arch/powerpc/include/asm/percpu.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_PERCPU_H_ +#define _ASM_POWERPC_PERCPU_H_ +#ifdef __powerpc64__ + +/* + * Same as asm-generic/percpu.h, except that we store the per cpu offset + * in the paca. Based on the x86-64 implementation. + */ + +#ifdef CONFIG_SMP + +#define __my_cpu_offset local_paca->data_offset + +#endif /* CONFIG_SMP */ +#endif /* __powerpc64__ */ + +#include <asm-generic/percpu.h> + +#include <asm/paca.h> + +#endif /* _ASM_POWERPC_PERCPU_H_ */ diff --git a/arch/powerpc/include/asm/perf_event.h b/arch/powerpc/include/asm/perf_event.h new file mode 100644 index 000000000..daec64d41 --- /dev/null +++ b/arch/powerpc/include/asm/perf_event.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Performance event support - hardware-specific disambiguation + * + * For now this is a compile-time decision, but eventually it should be + * runtime. This would allow multiplatform perf event support for e300 (fsl + * embedded perf counters) plus server/classic, and would accommodate + * devices other than the core which provide their own performance counters. + * + * Copyright 2010 Freescale Semiconductor, Inc. + */ + +#ifdef CONFIG_PPC_PERF_CTRS +#include <asm/perf_event_server.h> +#else +static inline bool is_sier_available(void) { return false; } +#endif + +#ifdef CONFIG_FSL_EMB_PERF_EVENT +#include <asm/perf_event_fsl_emb.h> +#endif + +#ifdef CONFIG_PERF_EVENTS +#include <asm/ptrace.h> +#include <asm/reg.h> + +#define perf_arch_bpf_user_pt_regs(regs) ®s->user_regs + +/* + * Overload regs->result to specify whether we should use the MSR (result + * is zero) or the SIAR (result is non zero). + */ +#define perf_arch_fetch_caller_regs(regs, __ip) \ + do { \ + (regs)->result = 0; \ + (regs)->nip = __ip; \ + (regs)->gpr[1] = current_stack_frame(); \ + asm volatile("mfmsr %0" : "=r" ((regs)->msr)); \ + } while (0) + +/* To support perf_regs sier update */ +extern bool is_sier_available(void); +/* To define perf extended regs mask value */ +extern u64 PERF_REG_EXTENDED_MASK; +#define PERF_REG_EXTENDED_MASK PERF_REG_EXTENDED_MASK +#endif diff --git a/arch/powerpc/include/asm/perf_event_fsl_emb.h b/arch/powerpc/include/asm/perf_event_fsl_emb.h new file mode 100644 index 000000000..c4d9ceb03 --- /dev/null +++ b/arch/powerpc/include/asm/perf_event_fsl_emb.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Performance event support - Freescale embedded specific definitions. + * + * Copyright 2008-2009 Paul Mackerras, IBM Corporation. + * Copyright 2010 Freescale Semiconductor, Inc. + */ + +#include <linux/types.h> +#include <asm/hw_irq.h> + +#define MAX_HWEVENTS 6 + +/* event flags */ +#define FSL_EMB_EVENT_VALID 1 +#define FSL_EMB_EVENT_RESTRICTED 2 + +/* upper half of event flags is PMLCb */ +#define FSL_EMB_EVENT_THRESHMUL 0x0000070000000000ULL +#define FSL_EMB_EVENT_THRESH 0x0000003f00000000ULL + +struct fsl_emb_pmu { + const char *name; + int n_counter; /* total number of counters */ + + /* + * The number of contiguous counters starting at zero that + * can hold restricted events, or zero if there are no + * restricted events. + * + * This isn't a very flexible method of expressing constraints, + * but it's very simple and is adequate for existing chips. + */ + int n_restricted; + + /* Returns event flags and PMLCb (FSL_EMB_EVENT_*) */ + u64 (*xlate_event)(u64 event_id); + + int n_generic; + int *generic_events; + int (*cache_events)[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX]; +}; + +int register_fsl_emb_pmu(struct fsl_emb_pmu *); diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h new file mode 100644 index 000000000..f6acabb6c --- /dev/null +++ b/arch/powerpc/include/asm/perf_event_server.h @@ -0,0 +1,176 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Performance event support - PowerPC classic/server specific definitions. + * + * Copyright 2008-2009 Paul Mackerras, IBM Corporation. + */ + +#include <linux/types.h> +#include <asm/hw_irq.h> +#include <linux/device.h> +#include <uapi/asm/perf_event.h> + +/* Update perf_event_print_debug() if this changes */ +#define MAX_HWEVENTS 8 +#define MAX_EVENT_ALTERNATIVES 8 +#define MAX_LIMITED_HWCOUNTERS 2 + +struct perf_event; + +struct mmcr_regs { + unsigned long mmcr0; + unsigned long mmcr1; + unsigned long mmcr2; + unsigned long mmcra; + unsigned long mmcr3; +}; +/* + * This struct provides the constants and functions needed to + * describe the PMU on a particular POWER-family CPU. + */ +struct power_pmu { + const char *name; + int n_counter; + int max_alternatives; + unsigned long add_fields; + unsigned long test_adder; + int (*compute_mmcr)(u64 events[], int n_ev, + unsigned int hwc[], struct mmcr_regs *mmcr, + struct perf_event *pevents[]); + int (*get_constraint)(u64 event_id, unsigned long *mskp, + unsigned long *valp); + int (*get_alternatives)(u64 event_id, unsigned int flags, + u64 alt[]); + void (*get_mem_data_src)(union perf_mem_data_src *dsrc, + u32 flags, struct pt_regs *regs); + void (*get_mem_weight)(u64 *weight); + unsigned long group_constraint_mask; + unsigned long group_constraint_val; + u64 (*bhrb_filter_map)(u64 branch_sample_type); + void (*config_bhrb)(u64 pmu_bhrb_filter); + void (*disable_pmc)(unsigned int pmc, struct mmcr_regs *mmcr); + int (*limited_pmc_event)(u64 event_id); + u32 flags; + const struct attribute_group **attr_groups; + int n_generic; + int *generic_events; + u64 (*cache_events)[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX]; + + int n_blacklist_ev; + int *blacklist_ev; + /* BHRB entries in the PMU */ + int bhrb_nr; + /* + * set this flag with `PERF_PMU_CAP_EXTENDED_REGS` if + * the pmu supports extended perf regs capability + */ + int capabilities; +}; + +/* + * Values for power_pmu.flags + */ +#define PPMU_LIMITED_PMC5_6 0x00000001 /* PMC5/6 have limited function */ +#define PPMU_ALT_SIPR 0x00000002 /* uses alternate posn for SIPR/HV */ +#define PPMU_NO_SIPR 0x00000004 /* no SIPR/HV in MMCRA at all */ +#define PPMU_NO_CONT_SAMPLING 0x00000008 /* no continuous sampling */ +#define PPMU_SIAR_VALID 0x00000010 /* Processor has SIAR Valid bit */ +#define PPMU_HAS_SSLOT 0x00000020 /* Has sampled slot in MMCRA */ +#define PPMU_HAS_SIER 0x00000040 /* Has SIER */ +#define PPMU_ARCH_207S 0x00000080 /* PMC is architecture v2.07S */ +#define PPMU_NO_SIAR 0x00000100 /* Do not use SIAR */ +#define PPMU_ARCH_31 0x00000200 /* Has MMCR3, SIER2 and SIER3 */ + +/* + * Values for flags to get_alternatives() + */ +#define PPMU_LIMITED_PMC_OK 1 /* can put this on a limited PMC */ +#define PPMU_LIMITED_PMC_REQD 2 /* have to put this on a limited PMC */ +#define PPMU_ONLY_COUNT_RUN 4 /* only counting in run state */ + +extern int register_power_pmu(struct power_pmu *); + +struct pt_regs; +extern unsigned long perf_misc_flags(struct pt_regs *regs); +extern unsigned long perf_instruction_pointer(struct pt_regs *regs); +extern unsigned long int read_bhrb(int n); + +/* + * Only override the default definitions in include/linux/perf_event.h + * if we have hardware PMU support. + */ +#ifdef CONFIG_PPC_PERF_CTRS +#define perf_misc_flags(regs) perf_misc_flags(regs) +#endif + +/* + * The power_pmu.get_constraint function returns a 32/64-bit value and + * a 32/64-bit mask that express the constraints between this event_id and + * other events. + * + * The value and mask are divided up into (non-overlapping) bitfields + * of three different types: + * + * Select field: this expresses the constraint that some set of bits + * in MMCR* needs to be set to a specific value for this event_id. For a + * select field, the mask contains 1s in every bit of the field, and + * the value contains a unique value for each possible setting of the + * MMCR* bits. The constraint checking code will ensure that two events + * that set the same field in their masks have the same value in their + * value dwords. + * + * Add field: this expresses the constraint that there can be at most + * N events in a particular class. A field of k bits can be used for + * N <= 2^(k-1) - 1. The mask has the most significant bit of the field + * set (and the other bits 0), and the value has only the least significant + * bit of the field set. In addition, the 'add_fields' and 'test_adder' + * in the struct power_pmu for this processor come into play. The + * add_fields value contains 1 in the LSB of the field, and the + * test_adder contains 2^(k-1) - 1 - N in the field. + * + * NAND field: this expresses the constraint that you may not have events + * in all of a set of classes. (For example, on PPC970, you can't select + * events from the FPU, ISU and IDU simultaneously, although any two are + * possible.) For N classes, the field is N+1 bits wide, and each class + * is assigned one bit from the least-significant N bits. The mask has + * only the most-significant bit set, and the value has only the bit + * for the event_id's class set. The test_adder has the least significant + * bit set in the field. + * + * If an event_id is not subject to the constraint expressed by a particular + * field, then it will have 0 in both the mask and value for that field. + */ + +extern ssize_t power_events_sysfs_show(struct device *dev, + struct device_attribute *attr, char *page); + +/* + * EVENT_VAR() is same as PMU_EVENT_VAR with a suffix. + * + * Having a suffix allows us to have aliases in sysfs - eg: the generic + * event 'cpu-cycles' can have two entries in sysfs: 'cpu-cycles' and + * 'PM_CYC' where the latter is the name by which the event is known in + * POWER CPU specification. + * + * Similarly, some hardware and cache events use the same event code. Eg. + * on POWER8, both "cache-references" and "L1-dcache-loads" events refer + * to the same event, PM_LD_REF_L1. The suffix, allows us to have two + * sysfs objects for the same event and thus two entries/aliases in sysfs. + */ +#define EVENT_VAR(_id, _suffix) event_attr_##_id##_suffix +#define EVENT_PTR(_id, _suffix) &EVENT_VAR(_id, _suffix).attr.attr + +#define EVENT_ATTR(_name, _id, _suffix) \ + PMU_EVENT_ATTR(_name, EVENT_VAR(_id, _suffix), _id, \ + power_events_sysfs_show) + +#define GENERIC_EVENT_ATTR(_name, _id) EVENT_ATTR(_name, _id, _g) +#define GENERIC_EVENT_PTR(_id) EVENT_PTR(_id, _g) + +#define CACHE_EVENT_ATTR(_name, _id) EVENT_ATTR(_name, _id, _c) +#define CACHE_EVENT_PTR(_id) EVENT_PTR(_id, _c) + +#define POWER_EVENT_ATTR(_name, _id) EVENT_ATTR(_name, _id, _p) +#define POWER_EVENT_PTR(_id) EVENT_PTR(_id, _p) diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h new file mode 100644 index 000000000..6dd78a2dc --- /dev/null +++ b/arch/powerpc/include/asm/pgalloc.h @@ -0,0 +1,78 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_PGALLOC_H +#define _ASM_POWERPC_PGALLOC_H + +#include <linux/mm.h> + +#ifndef MODULE +static inline gfp_t pgtable_gfp_flags(struct mm_struct *mm, gfp_t gfp) +{ + if (unlikely(mm == &init_mm)) + return gfp; + return gfp | __GFP_ACCOUNT; +} +#else /* !MODULE */ +static inline gfp_t pgtable_gfp_flags(struct mm_struct *mm, gfp_t gfp) +{ + return gfp | __GFP_ACCOUNT; +} +#endif /* MODULE */ + +#define PGALLOC_GFP (GFP_KERNEL | __GFP_ZERO) + +pte_t *pte_fragment_alloc(struct mm_struct *mm, int kernel); + +static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm) +{ + return (pte_t *)pte_fragment_alloc(mm, 1); +} + +static inline pgtable_t pte_alloc_one(struct mm_struct *mm) +{ + return (pgtable_t)pte_fragment_alloc(mm, 0); +} + +void pte_frag_destroy(void *pte_frag); +void pte_fragment_free(unsigned long *table, int kernel); + +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + pte_fragment_free((unsigned long *)pte, 1); +} + +static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage) +{ + pte_fragment_free((unsigned long *)ptepage, 0); +} + +/* + * Functions that deal with pagetables that could be at any level of + * the table need to be passed an "index_size" so they know how to + * handle allocation. For PTE pages, the allocation size will be + * (2^index_size * sizeof(pointer)) and allocations are drawn from + * the kmem_cache in PGT_CACHE(index_size). + * + * The maximum index size needs to be big enough to allow any + * pagetable sizes we need, but small enough to fit in the low bits of + * any page table pointer. In other words all pagetables, even tiny + * ones, must be aligned to allow at least enough low 0 bits to + * contain this value. This value is also used as a mask, so it must + * be one less than a power of two. + */ +#define MAX_PGTABLE_INDEX_SIZE 0xf + +extern struct kmem_cache *pgtable_cache[]; +#define PGT_CACHE(shift) pgtable_cache[shift] + +#ifdef CONFIG_PPC_BOOK3S +#include <asm/book3s/pgalloc.h> +#else +#include <asm/nohash/pgalloc.h> +#endif + +static inline pgtable_t pmd_pgtable(pmd_t pmd) +{ + return (pgtable_t)pmd_page_vaddr(pmd); +} + +#endif /* _ASM_POWERPC_PGALLOC_H */ diff --git a/arch/powerpc/include/asm/pgtable-be-types.h b/arch/powerpc/include/asm/pgtable-be-types.h new file mode 100644 index 000000000..b169bbf95 --- /dev/null +++ b/arch/powerpc/include/asm/pgtable-be-types.h @@ -0,0 +1,112 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_PGTABLE_BE_TYPES_H +#define _ASM_POWERPC_PGTABLE_BE_TYPES_H + +#include <asm/cmpxchg.h> + +/* PTE level */ +typedef struct { __be64 pte; } pte_t; +#define __pte(x) ((pte_t) { cpu_to_be64(x) }) +#define __pte_raw(x) ((pte_t) { (x) }) +static inline unsigned long pte_val(pte_t x) +{ + return be64_to_cpu(x.pte); +} + +static inline __be64 pte_raw(pte_t x) +{ + return x.pte; +} + +/* PMD level */ +#ifdef CONFIG_PPC64 +typedef struct { __be64 pmd; } pmd_t; +#define __pmd(x) ((pmd_t) { cpu_to_be64(x) }) +#define __pmd_raw(x) ((pmd_t) { (x) }) +static inline unsigned long pmd_val(pmd_t x) +{ + return be64_to_cpu(x.pmd); +} + +static inline __be64 pmd_raw(pmd_t x) +{ + return x.pmd; +} + +/* 64 bit always use 4 level table. */ +typedef struct { __be64 pud; } pud_t; +#define __pud(x) ((pud_t) { cpu_to_be64(x) }) +#define __pud_raw(x) ((pud_t) { (x) }) +static inline unsigned long pud_val(pud_t x) +{ + return be64_to_cpu(x.pud); +} + +static inline __be64 pud_raw(pud_t x) +{ + return x.pud; +} + +#endif /* CONFIG_PPC64 */ + +/* PGD level */ +typedef struct { __be64 pgd; } pgd_t; +#define __pgd(x) ((pgd_t) { cpu_to_be64(x) }) +#define __pgd_raw(x) ((pgd_t) { (x) }) +static inline unsigned long pgd_val(pgd_t x) +{ + return be64_to_cpu(x.pgd); +} + +static inline __be64 pgd_raw(pgd_t x) +{ + return x.pgd; +} + +/* Page protection bits */ +typedef struct { unsigned long pgprot; } pgprot_t; +#define pgprot_val(x) ((x).pgprot) +#define __pgprot(x) ((pgprot_t) { (x) }) + +/* + * With hash config 64k pages additionally define a bigger "real PTE" type that + * gathers the "second half" part of the PTE for pseudo 64k pages + */ +#ifdef CONFIG_PPC_64K_PAGES +typedef struct { pte_t pte; unsigned long hidx; } real_pte_t; +#else +typedef struct { pte_t pte; } real_pte_t; +#endif + +static inline bool pte_xchg(pte_t *ptep, pte_t old, pte_t new) +{ + unsigned long *p = (unsigned long *)ptep; + __be64 prev; + + /* See comment in switch_mm_irqs_off() */ + prev = (__force __be64)__cmpxchg_u64(p, (__force unsigned long)pte_raw(old), + (__force unsigned long)pte_raw(new)); + + return pte_raw(old) == prev; +} + +static inline bool pmd_xchg(pmd_t *pmdp, pmd_t old, pmd_t new) +{ + unsigned long *p = (unsigned long *)pmdp; + __be64 prev; + + prev = (__force __be64)__cmpxchg_u64(p, (__force unsigned long)pmd_raw(old), + (__force unsigned long)pmd_raw(new)); + + return pmd_raw(old) == prev; +} + +typedef struct { __be64 pdbe; } hugepd_t; +#define __hugepd(x) ((hugepd_t) { cpu_to_be64(x) }) + +static inline unsigned long hpd_val(hugepd_t x) +{ + return be64_to_cpu(x.pdbe); +} + +#endif /* _ASM_POWERPC_PGTABLE_BE_TYPES_H */ diff --git a/arch/powerpc/include/asm/pgtable-types.h b/arch/powerpc/include/asm/pgtable-types.h new file mode 100644 index 000000000..d11b4c61d --- /dev/null +++ b/arch/powerpc/include/asm/pgtable-types.h @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_PGTABLE_TYPES_H +#define _ASM_POWERPC_PGTABLE_TYPES_H + +/* PTE level */ +#if defined(CONFIG_PPC_8xx) && defined(CONFIG_PPC_16K_PAGES) +typedef struct { pte_basic_t pte, pte1, pte2, pte3; } pte_t; +#else +typedef struct { pte_basic_t pte; } pte_t; +#endif +#define __pte(x) ((pte_t) { (x) }) +static inline pte_basic_t pte_val(pte_t x) +{ + return x.pte; +} + +/* PMD level */ +#ifdef CONFIG_PPC64 +typedef struct { unsigned long pmd; } pmd_t; +#define __pmd(x) ((pmd_t) { (x) }) +static inline unsigned long pmd_val(pmd_t x) +{ + return x.pmd; +} + +/* 64 bit always use 4 level table. */ +typedef struct { unsigned long pud; } pud_t; +#define __pud(x) ((pud_t) { (x) }) +static inline unsigned long pud_val(pud_t x) +{ + return x.pud; +} +#endif /* CONFIG_PPC64 */ + +/* PGD level */ +typedef struct { unsigned long pgd; } pgd_t; +#define __pgd(x) ((pgd_t) { (x) }) +static inline unsigned long pgd_val(pgd_t x) +{ + return x.pgd; +} + +/* Page protection bits */ +typedef struct { unsigned long pgprot; } pgprot_t; +#define pgprot_val(x) ((x).pgprot) +#define __pgprot(x) ((pgprot_t) { (x) }) + +/* + * With hash config 64k pages additionally define a bigger "real PTE" type that + * gathers the "second half" part of the PTE for pseudo 64k pages + */ +#ifdef CONFIG_PPC_64K_PAGES +typedef struct { pte_t pte; unsigned long hidx; } real_pte_t; +#else +typedef struct { pte_t pte; } real_pte_t; +#endif + +#ifdef CONFIG_PPC_BOOK3S_64 +#include <asm/cmpxchg.h> + +static inline bool pte_xchg(pte_t *ptep, pte_t old, pte_t new) +{ + unsigned long *p = (unsigned long *)ptep; + + /* See comment in switch_mm_irqs_off() */ + return pte_val(old) == __cmpxchg_u64(p, pte_val(old), pte_val(new)); +} +#endif + +typedef struct { unsigned long pd; } hugepd_t; +#define __hugepd(x) ((hugepd_t) { (x) }) +static inline unsigned long hpd_val(hugepd_t x) +{ + return x.pd; +} + +#endif /* _ASM_POWERPC_PGTABLE_TYPES_H */ diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h new file mode 100644 index 000000000..f7613f43c --- /dev/null +++ b/arch/powerpc/include/asm/pgtable.h @@ -0,0 +1,169 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_PGTABLE_H +#define _ASM_POWERPC_PGTABLE_H + +#ifndef __ASSEMBLY__ +#include <linux/mmdebug.h> +#include <linux/mmzone.h> +#include <asm/processor.h> /* For TASK_SIZE */ +#include <asm/mmu.h> +#include <asm/page.h> +#include <asm/tlbflush.h> + +struct mm_struct; + +#endif /* !__ASSEMBLY__ */ + +#ifdef CONFIG_PPC_BOOK3S +#include <asm/book3s/pgtable.h> +#else +#include <asm/nohash/pgtable.h> +#endif /* !CONFIG_PPC_BOOK3S */ + +/* Note due to the way vm flags are laid out, the bits are XWR */ +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY +#define __P010 PAGE_COPY +#define __P011 PAGE_COPY +#define __P100 PAGE_READONLY_X +#define __P101 PAGE_READONLY_X +#define __P110 PAGE_COPY_X +#define __P111 PAGE_COPY_X + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY +#define __S010 PAGE_SHARED +#define __S011 PAGE_SHARED +#define __S100 PAGE_READONLY_X +#define __S101 PAGE_READONLY_X +#define __S110 PAGE_SHARED_X +#define __S111 PAGE_SHARED_X + +#ifndef __ASSEMBLY__ + +#include <asm/tlbflush.h> + +/* Keep these as a macros to avoid include dependency mess */ +#define pte_page(x) pfn_to_page(pte_pfn(x)) +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) +/* + * Select all bits except the pfn + */ +static inline pgprot_t pte_pgprot(pte_t pte) +{ + unsigned long pte_flags; + + pte_flags = pte_val(pte) & ~PTE_RPN_MASK; + return __pgprot(pte_flags); +} + +#ifndef pmd_page_vaddr +static inline unsigned long pmd_page_vaddr(pmd_t pmd) +{ + return ((unsigned long)__va(pmd_val(pmd) & ~PMD_MASKED_BITS)); +} +#define pmd_page_vaddr pmd_page_vaddr +#endif +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +extern unsigned long empty_zero_page[]; +#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) + +extern pgd_t swapper_pg_dir[]; + +extern void paging_init(void); + +extern unsigned long ioremap_bot; + +/* + * kern_addr_valid is intended to indicate whether an address is a valid + * kernel address. Most 32-bit archs define it as always true (like this) + * but most 64-bit archs actually perform a test. What should we do here? + */ +#define kern_addr_valid(addr) (1) + +#ifndef CONFIG_TRANSPARENT_HUGEPAGE +#define pmd_large(pmd) 0 +#endif + +/* can we use this in kvm */ +unsigned long vmalloc_to_phys(void *vmalloc_addr); + +void pgtable_cache_add(unsigned int shift); + +pte_t *early_pte_alloc_kernel(pmd_t *pmdp, unsigned long va); + +#if defined(CONFIG_STRICT_KERNEL_RWX) || defined(CONFIG_PPC32) +void mark_initmem_nx(void); +#else +static inline void mark_initmem_nx(void) { } +#endif + +/* + * When used, PTE_FRAG_NR is defined in subarch pgtable.h + * so we are sure it is included when arriving here. + */ +#ifdef PTE_FRAG_NR +static inline void *pte_frag_get(mm_context_t *ctx) +{ + return ctx->pte_frag; +} + +static inline void pte_frag_set(mm_context_t *ctx, void *p) +{ + ctx->pte_frag = p; +} +#else +#define PTE_FRAG_NR 1 +#define PTE_FRAG_SIZE_SHIFT PAGE_SHIFT +#define PTE_FRAG_SIZE (1UL << PTE_FRAG_SIZE_SHIFT) + +static inline void *pte_frag_get(mm_context_t *ctx) +{ + return NULL; +} + +static inline void pte_frag_set(mm_context_t *ctx, void *p) +{ +} +#endif + +#ifndef pmd_is_leaf +#define pmd_is_leaf pmd_is_leaf +static inline bool pmd_is_leaf(pmd_t pmd) +{ + return false; +} +#endif + +#ifndef pud_is_leaf +#define pud_is_leaf pud_is_leaf +static inline bool pud_is_leaf(pud_t pud) +{ + return false; +} +#endif + +#ifndef p4d_is_leaf +#define p4d_is_leaf p4d_is_leaf +static inline bool p4d_is_leaf(p4d_t p4d) +{ + return false; +} +#endif + +#ifdef CONFIG_PPC64 +#define is_ioremap_addr is_ioremap_addr +static inline bool is_ioremap_addr(const void *x) +{ + unsigned long addr = (unsigned long)x; + + return addr >= IOREMAP_BASE && addr < IOREMAP_END; +} +#endif /* CONFIG_PPC64 */ + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_PGTABLE_H */ diff --git a/arch/powerpc/include/asm/pkeys.h b/arch/powerpc/include/asm/pkeys.h new file mode 100644 index 000000000..a7951049e --- /dev/null +++ b/arch/powerpc/include/asm/pkeys.h @@ -0,0 +1,178 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * PowerPC Memory Protection Keys management + * + * Copyright 2017, Ram Pai, IBM Corporation. + */ + +#ifndef _ASM_POWERPC_KEYS_H +#define _ASM_POWERPC_KEYS_H + +#include <linux/jump_label.h> +#include <asm/firmware.h> + +extern int num_pkey; +extern u32 reserved_allocation_mask; /* bits set for reserved keys */ + +#define ARCH_VM_PKEY_FLAGS (VM_PKEY_BIT0 | VM_PKEY_BIT1 | VM_PKEY_BIT2 | \ + VM_PKEY_BIT3 | VM_PKEY_BIT4) + +/* Override any generic PKEY permission defines */ +#define PKEY_DISABLE_EXECUTE 0x4 +#define PKEY_ACCESS_MASK (PKEY_DISABLE_ACCESS | \ + PKEY_DISABLE_WRITE | \ + PKEY_DISABLE_EXECUTE) + +#ifdef CONFIG_PPC_BOOK3S_64 +#include <asm/book3s/64/pkeys.h> +#else +#error "Not supported" +#endif + + +static inline u64 pkey_to_vmflag_bits(u16 pkey) +{ + return (((u64)pkey << VM_PKEY_SHIFT) & ARCH_VM_PKEY_FLAGS); +} + +static inline int vma_pkey(struct vm_area_struct *vma) +{ + if (!mmu_has_feature(MMU_FTR_PKEY)) + return 0; + return (vma->vm_flags & ARCH_VM_PKEY_FLAGS) >> VM_PKEY_SHIFT; +} + +static inline int arch_max_pkey(void) +{ + return num_pkey; +} + +#define pkey_alloc_mask(pkey) (0x1 << pkey) + +#define mm_pkey_allocation_map(mm) (mm->context.pkey_allocation_map) + +#define __mm_pkey_allocated(mm, pkey) { \ + mm_pkey_allocation_map(mm) |= pkey_alloc_mask(pkey); \ +} + +#define __mm_pkey_free(mm, pkey) { \ + mm_pkey_allocation_map(mm) &= ~pkey_alloc_mask(pkey); \ +} + +#define __mm_pkey_is_allocated(mm, pkey) \ + (mm_pkey_allocation_map(mm) & pkey_alloc_mask(pkey)) + +#define __mm_pkey_is_reserved(pkey) (reserved_allocation_mask & \ + pkey_alloc_mask(pkey)) + +static inline bool mm_pkey_is_allocated(struct mm_struct *mm, int pkey) +{ + if (pkey < 0 || pkey >= arch_max_pkey()) + return false; + + /* Reserved keys are never allocated. */ + if (__mm_pkey_is_reserved(pkey)) + return false; + + return __mm_pkey_is_allocated(mm, pkey); +} + +/* + * Returns a positive, 5-bit key on success, or -1 on failure. + * Relies on the mmap_lock to protect against concurrency in mm_pkey_alloc() and + * mm_pkey_free(). + */ +static inline int mm_pkey_alloc(struct mm_struct *mm) +{ + /* + * Note: this is the one and only place we make sure that the pkey is + * valid as far as the hardware is concerned. The rest of the kernel + * trusts that only good, valid pkeys come out of here. + */ + u32 all_pkeys_mask = (u32)(~(0x0)); + int ret; + + if (!mmu_has_feature(MMU_FTR_PKEY)) + return -1; + /* + * Are we out of pkeys? We must handle this specially because ffz() + * behavior is undefined if there are no zeros. + */ + if (mm_pkey_allocation_map(mm) == all_pkeys_mask) + return -1; + + ret = ffz((u32)mm_pkey_allocation_map(mm)); + __mm_pkey_allocated(mm, ret); + + return ret; +} + +static inline int mm_pkey_free(struct mm_struct *mm, int pkey) +{ + if (!mmu_has_feature(MMU_FTR_PKEY)) + return -1; + + if (!mm_pkey_is_allocated(mm, pkey)) + return -EINVAL; + + __mm_pkey_free(mm, pkey); + + return 0; +} + +/* + * Try to dedicate one of the protection keys to be used as an + * execute-only protection key. + */ +extern int execute_only_pkey(struct mm_struct *mm); +extern int __arch_override_mprotect_pkey(struct vm_area_struct *vma, + int prot, int pkey); +static inline int arch_override_mprotect_pkey(struct vm_area_struct *vma, + int prot, int pkey) +{ + if (!mmu_has_feature(MMU_FTR_PKEY)) + return 0; + + /* + * Is this an mprotect_pkey() call? If so, never override the value that + * came from the user. + */ + if (pkey != -1) + return pkey; + + return __arch_override_mprotect_pkey(vma, prot, pkey); +} + +extern int __arch_set_user_pkey_access(struct task_struct *tsk, int pkey, + unsigned long init_val); +static inline int arch_set_user_pkey_access(struct task_struct *tsk, int pkey, + unsigned long init_val) +{ + if (!mmu_has_feature(MMU_FTR_PKEY)) + return -EINVAL; + + /* + * userspace should not change pkey-0 permissions. + * pkey-0 is associated with every page in the kernel. + * If userspace denies any permission on pkey-0, the + * kernel cannot operate. + */ + if (pkey == 0) + return init_val ? -EINVAL : 0; + + return __arch_set_user_pkey_access(tsk, pkey, init_val); +} + +static inline bool arch_pkeys_enabled(void) +{ + return mmu_has_feature(MMU_FTR_PKEY); +} + +extern void pkey_mm_init(struct mm_struct *mm); +extern bool arch_supports_pkeys(int cap); +extern unsigned int arch_usable_pkeys(void); +extern void thread_pkey_regs_save(struct thread_struct *thread); +extern void thread_pkey_regs_restore(struct thread_struct *new_thread, + struct thread_struct *old_thread); +extern void thread_pkey_regs_init(struct thread_struct *thread); +#endif /*_ASM_POWERPC_KEYS_H */ diff --git a/arch/powerpc/include/asm/plpar_wrappers.h b/arch/powerpc/include/asm/plpar_wrappers.h new file mode 100644 index 000000000..7796cc05e --- /dev/null +++ b/arch/powerpc/include/asm/plpar_wrappers.h @@ -0,0 +1,409 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_PLPAR_WRAPPERS_H +#define _ASM_POWERPC_PLPAR_WRAPPERS_H + +#ifdef CONFIG_PPC_PSERIES + +#include <linux/string.h> +#include <linux/irqflags.h> + +#include <asm/hvcall.h> +#include <asm/paca.h> +#include <asm/lppaca.h> +#include <asm/page.h> + +static inline long poll_pending(void) +{ + return plpar_hcall_norets(H_POLL_PENDING); +} + +static inline u8 get_cede_latency_hint(void) +{ + return get_lppaca()->cede_latency_hint; +} + +static inline void set_cede_latency_hint(u8 latency_hint) +{ + get_lppaca()->cede_latency_hint = latency_hint; +} + +static inline long cede_processor(void) +{ + return plpar_hcall_norets(H_CEDE); +} + +static inline long extended_cede_processor(unsigned long latency_hint) +{ + long rc; + u8 old_latency_hint = get_cede_latency_hint(); + + set_cede_latency_hint(latency_hint); + + rc = cede_processor(); +#ifdef CONFIG_PPC_IRQ_SOFT_MASK_DEBUG + /* Ensure that H_CEDE returns with IRQs on */ + if (WARN_ON(!(mfmsr() & MSR_EE))) + __hard_irq_enable(); +#endif + + set_cede_latency_hint(old_latency_hint); + + return rc; +} + +static inline long vpa_call(unsigned long flags, unsigned long cpu, + unsigned long vpa) +{ + flags = flags << H_VPA_FUNC_SHIFT; + + return plpar_hcall_norets(H_REGISTER_VPA, flags, cpu, vpa); +} + +static inline long unregister_vpa(unsigned long cpu) +{ + return vpa_call(H_VPA_DEREG_VPA, cpu, 0); +} + +static inline long register_vpa(unsigned long cpu, unsigned long vpa) +{ + return vpa_call(H_VPA_REG_VPA, cpu, vpa); +} + +static inline long unregister_slb_shadow(unsigned long cpu) +{ + return vpa_call(H_VPA_DEREG_SLB, cpu, 0); +} + +static inline long register_slb_shadow(unsigned long cpu, unsigned long vpa) +{ + return vpa_call(H_VPA_REG_SLB, cpu, vpa); +} + +static inline long unregister_dtl(unsigned long cpu) +{ + return vpa_call(H_VPA_DEREG_DTL, cpu, 0); +} + +static inline long register_dtl(unsigned long cpu, unsigned long vpa) +{ + return vpa_call(H_VPA_REG_DTL, cpu, vpa); +} + +extern void vpa_init(int cpu); + +static inline long plpar_pte_enter(unsigned long flags, + unsigned long hpte_group, unsigned long hpte_v, + unsigned long hpte_r, unsigned long *slot) +{ + long rc; + unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; + + rc = plpar_hcall(H_ENTER, retbuf, flags, hpte_group, hpte_v, hpte_r); + + *slot = retbuf[0]; + + return rc; +} + +static inline long plpar_pte_remove(unsigned long flags, unsigned long ptex, + unsigned long avpn, unsigned long *old_pteh_ret, + unsigned long *old_ptel_ret) +{ + long rc; + unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; + + rc = plpar_hcall(H_REMOVE, retbuf, flags, ptex, avpn); + + *old_pteh_ret = retbuf[0]; + *old_ptel_ret = retbuf[1]; + + return rc; +} + +/* plpar_pte_remove_raw can be called in real mode. It calls plpar_hcall_raw */ +static inline long plpar_pte_remove_raw(unsigned long flags, unsigned long ptex, + unsigned long avpn, unsigned long *old_pteh_ret, + unsigned long *old_ptel_ret) +{ + long rc; + unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; + + rc = plpar_hcall_raw(H_REMOVE, retbuf, flags, ptex, avpn); + + *old_pteh_ret = retbuf[0]; + *old_ptel_ret = retbuf[1]; + + return rc; +} + +static inline long plpar_pte_read(unsigned long flags, unsigned long ptex, + unsigned long *old_pteh_ret, unsigned long *old_ptel_ret) +{ + long rc; + unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; + + rc = plpar_hcall(H_READ, retbuf, flags, ptex); + + *old_pteh_ret = retbuf[0]; + *old_ptel_ret = retbuf[1]; + + return rc; +} + +/* plpar_pte_read_raw can be called in real mode. It calls plpar_hcall_raw */ +static inline long plpar_pte_read_raw(unsigned long flags, unsigned long ptex, + unsigned long *old_pteh_ret, unsigned long *old_ptel_ret) +{ + long rc; + unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; + + rc = plpar_hcall_raw(H_READ, retbuf, flags, ptex); + + *old_pteh_ret = retbuf[0]; + *old_ptel_ret = retbuf[1]; + + return rc; +} + +/* + * ptes must be 8*sizeof(unsigned long) + */ +static inline long plpar_pte_read_4(unsigned long flags, unsigned long ptex, + unsigned long *ptes) + +{ + long rc; + unsigned long retbuf[PLPAR_HCALL9_BUFSIZE]; + + rc = plpar_hcall9(H_READ, retbuf, flags | H_READ_4, ptex); + + memcpy(ptes, retbuf, 8*sizeof(unsigned long)); + + return rc; +} + +/* + * plpar_pte_read_4_raw can be called in real mode. + * ptes must be 8*sizeof(unsigned long) + */ +static inline long plpar_pte_read_4_raw(unsigned long flags, unsigned long ptex, + unsigned long *ptes) + +{ + long rc; + unsigned long retbuf[PLPAR_HCALL9_BUFSIZE]; + + rc = plpar_hcall9_raw(H_READ, retbuf, flags | H_READ_4, ptex); + + memcpy(ptes, retbuf, 8*sizeof(unsigned long)); + + return rc; +} + +static inline long plpar_pte_protect(unsigned long flags, unsigned long ptex, + unsigned long avpn) +{ + return plpar_hcall_norets(H_PROTECT, flags, ptex, avpn); +} + +static inline long plpar_resize_hpt_prepare(unsigned long flags, + unsigned long shift) +{ + return plpar_hcall_norets(H_RESIZE_HPT_PREPARE, flags, shift); +} + +static inline long plpar_resize_hpt_commit(unsigned long flags, + unsigned long shift) +{ + return plpar_hcall_norets(H_RESIZE_HPT_COMMIT, flags, shift); +} + +static inline long plpar_tce_get(unsigned long liobn, unsigned long ioba, + unsigned long *tce_ret) +{ + long rc; + unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; + + rc = plpar_hcall(H_GET_TCE, retbuf, liobn, ioba); + + *tce_ret = retbuf[0]; + + return rc; +} + +static inline long plpar_tce_put(unsigned long liobn, unsigned long ioba, + unsigned long tceval) +{ + return plpar_hcall_norets(H_PUT_TCE, liobn, ioba, tceval); +} + +static inline long plpar_tce_put_indirect(unsigned long liobn, + unsigned long ioba, unsigned long page, unsigned long count) +{ + return plpar_hcall_norets(H_PUT_TCE_INDIRECT, liobn, ioba, page, count); +} + +static inline long plpar_tce_stuff(unsigned long liobn, unsigned long ioba, + unsigned long tceval, unsigned long count) +{ + return plpar_hcall_norets(H_STUFF_TCE, liobn, ioba, tceval, count); +} + +/* Set various resource mode parameters */ +static inline long plpar_set_mode(unsigned long mflags, unsigned long resource, + unsigned long value1, unsigned long value2) +{ + return plpar_hcall_norets(H_SET_MODE, mflags, resource, value1, value2); +} + +/* + * Enable relocation on exceptions on this partition + * + * Note: this call has a partition wide scope and can take a while to complete. + * If it returns H_LONG_BUSY_* it should be retried periodically until it + * returns H_SUCCESS. + */ +static inline long enable_reloc_on_exceptions(void) +{ + /* mflags = 3: Exceptions at 0xC000000000004000 */ + return plpar_set_mode(3, H_SET_MODE_RESOURCE_ADDR_TRANS_MODE, 0, 0); +} + +/* + * Disable relocation on exceptions on this partition + * + * Note: this call has a partition wide scope and can take a while to complete. + * If it returns H_LONG_BUSY_* it should be retried periodically until it + * returns H_SUCCESS. + */ +static inline long disable_reloc_on_exceptions(void) { + return plpar_set_mode(0, H_SET_MODE_RESOURCE_ADDR_TRANS_MODE, 0, 0); +} + +/* + * Take exceptions in big endian mode on this partition + * + * Note: this call has a partition wide scope and can take a while to complete. + * If it returns H_LONG_BUSY_* it should be retried periodically until it + * returns H_SUCCESS. + */ +static inline long enable_big_endian_exceptions(void) +{ + /* mflags = 0: big endian exceptions */ + return plpar_set_mode(0, H_SET_MODE_RESOURCE_LE, 0, 0); +} + +/* + * Take exceptions in little endian mode on this partition + * + * Note: this call has a partition wide scope and can take a while to complete. + * If it returns H_LONG_BUSY_* it should be retried periodically until it + * returns H_SUCCESS. + */ +static inline long enable_little_endian_exceptions(void) +{ + /* mflags = 1: little endian exceptions */ + return plpar_set_mode(1, H_SET_MODE_RESOURCE_LE, 0, 0); +} + +static inline long plpar_set_ciabr(unsigned long ciabr) +{ + return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_CIABR, ciabr, 0); +} + +static inline long plpar_set_watchpoint0(unsigned long dawr0, unsigned long dawrx0) +{ + return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR0, dawr0, dawrx0); +} + +static inline long plpar_set_watchpoint1(unsigned long dawr1, unsigned long dawrx1) +{ + return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR1, dawr1, dawrx1); +} + +static inline long plpar_signal_sys_reset(long cpu) +{ + return plpar_hcall_norets(H_SIGNAL_SYS_RESET, cpu); +} + +static inline long plpar_get_cpu_characteristics(struct h_cpu_char_result *p) +{ + unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; + long rc; + + rc = plpar_hcall(H_GET_CPU_CHARACTERISTICS, retbuf); + if (rc == H_SUCCESS) { + p->character = retbuf[0]; + p->behaviour = retbuf[1]; + } + + return rc; +} + +/* + * Wrapper to H_RPT_INVALIDATE hcall that handles return values appropriately + * + * - Returns H_SUCCESS on success + * - For H_BUSY return value, we retry the hcall. + * - For any other hcall failures, attempt a full flush once before + * resorting to BUG(). + * + * Note: This hcall is expected to fail only very rarely. The correct + * error recovery of killing the process/guest will be eventually + * needed. + */ +static inline long pseries_rpt_invalidate(u32 pid, u64 target, u64 type, + u64 page_sizes, u64 start, u64 end) +{ + long rc; + unsigned long all; + + while (true) { + rc = plpar_hcall_norets(H_RPT_INVALIDATE, pid, target, type, + page_sizes, start, end); + if (rc == H_BUSY) { + cpu_relax(); + continue; + } else if (rc == H_SUCCESS) + return rc; + + /* Flush request failed, try with a full flush once */ + if (type & H_RPTI_TYPE_NESTED) + all = H_RPTI_TYPE_NESTED | H_RPTI_TYPE_NESTED_ALL; + else + all = H_RPTI_TYPE_ALL; +retry: + rc = plpar_hcall_norets(H_RPT_INVALIDATE, pid, target, + all, page_sizes, 0, -1UL); + if (rc == H_BUSY) { + cpu_relax(); + goto retry; + } else if (rc == H_SUCCESS) + return rc; + + BUG(); + } +} + +#else /* !CONFIG_PPC_PSERIES */ + +static inline long plpar_set_ciabr(unsigned long ciabr) +{ + return 0; +} + +static inline long plpar_pte_read_4(unsigned long flags, unsigned long ptex, + unsigned long *ptes) +{ + return 0; +} + +static inline long pseries_rpt_invalidate(u32 pid, u64 target, u64 type, + u64 page_sizes, u64 start, u64 end) +{ + return 0; +} + +#endif /* CONFIG_PPC_PSERIES */ + +#endif /* _ASM_POWERPC_PLPAR_WRAPPERS_H */ diff --git a/arch/powerpc/include/asm/pmac_feature.h b/arch/powerpc/include/asm/pmac_feature.h new file mode 100644 index 000000000..e08e82926 --- /dev/null +++ b/arch/powerpc/include/asm/pmac_feature.h @@ -0,0 +1,405 @@ +/* + * Definition of platform feature hooks for PowerMacs + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998 Paul Mackerras & + * Ben. Herrenschmidt. + * + * + * Note: I removed media-bay details from the feature stuff, I believe it's + * not worth it, the media-bay driver can directly use the mac-io + * ASIC registers. + * + * Implementation note: Currently, none of these functions will block. + * However, they may internally protect themselves with a spinlock + * for way too long. Be prepared for at least some of these to block + * in the future. + * + * Unless specifically defined, the result code is assumed to be an + * error when negative, 0 is the default success result. Some functions + * may return additional positive result values. + * + * To keep implementation simple, all feature calls are assumed to have + * the prototype parameters (struct device_node* node, int value). + * When either is not used, pass 0. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_POWERPC_PMAC_FEATURE_H +#define __ASM_POWERPC_PMAC_FEATURE_H + +#include <asm/macio.h> +#include <asm/machdep.h> + +/* + * Known Mac motherboard models + * + * Please, report any error here to benh@kernel.crashing.org, thanks ! + * + * Note that I don't fully maintain this list for Core99 & MacRISC2 + * and I'm considering removing all NewWorld entries from it and + * entirely rely on the model string. + */ + +/* PowerSurge are the first generation of PCI Pmacs. This include + * all of the Grand-Central based machines. We currently don't + * differentiate most of them. + */ +#define PMAC_TYPE_PSURGE 0x10 /* PowerSurge */ +#define PMAC_TYPE_ANS 0x11 /* Apple Network Server */ + +/* Here is the infamous serie of OHare based machines + */ +#define PMAC_TYPE_COMET 0x20 /* Believed to be PowerBook 2400 */ +#define PMAC_TYPE_HOOPER 0x21 /* Believed to be PowerBook 3400 */ +#define PMAC_TYPE_KANGA 0x22 /* PowerBook 3500 (first G3) */ +#define PMAC_TYPE_ALCHEMY 0x23 /* Alchemy motherboard base */ +#define PMAC_TYPE_GAZELLE 0x24 /* Spartacus, some 5xxx/6xxx */ +#define PMAC_TYPE_UNKNOWN_OHARE 0x2f /* Unknown, but OHare based */ + +/* Here are the Heathrow based machines + * FIXME: Differenciate wallstreet,mainstreet,wallstreetII + */ +#define PMAC_TYPE_GOSSAMER 0x30 /* Gossamer motherboard */ +#define PMAC_TYPE_SILK 0x31 /* Desktop PowerMac G3 */ +#define PMAC_TYPE_WALLSTREET 0x32 /* Wallstreet/Mainstreet PowerBook*/ +#define PMAC_TYPE_UNKNOWN_HEATHROW 0x3f /* Unknown but heathrow based */ + +/* Here are newworld machines based on Paddington (heathrow derivative) + */ +#define PMAC_TYPE_101_PBOOK 0x40 /* 101 PowerBook (aka Lombard) */ +#define PMAC_TYPE_ORIG_IMAC 0x41 /* First generation iMac */ +#define PMAC_TYPE_YOSEMITE 0x42 /* B&W G3 */ +#define PMAC_TYPE_YIKES 0x43 /* Yikes G4 (PCI graphics) */ +#define PMAC_TYPE_UNKNOWN_PADDINGTON 0x4f /* Unknown but paddington based */ + +/* Core99 machines based on UniNorth 1.0 and 1.5 + * + * Note: A single entry here may cover several actual models according + * to the device-tree. (Sawtooth is most tower G4s, FW_IMAC is most + * FireWire based iMacs, etc...). Those machines are too similar to be + * distinguished here, when they need to be differencied, use the + * device-tree "model" or "compatible" property. + */ +#define PMAC_TYPE_ORIG_IBOOK 0x40 /* First iBook model (no firewire) */ +#define PMAC_TYPE_SAWTOOTH 0x41 /* Desktop G4s */ +#define PMAC_TYPE_FW_IMAC 0x42 /* FireWire iMacs (except Pangea based) */ +#define PMAC_TYPE_FW_IBOOK 0x43 /* FireWire iBooks (except iBook2) */ +#define PMAC_TYPE_CUBE 0x44 /* Cube PowerMac */ +#define PMAC_TYPE_QUICKSILVER 0x45 /* QuickSilver G4s */ +#define PMAC_TYPE_PISMO 0x46 /* Pismo PowerBook */ +#define PMAC_TYPE_TITANIUM 0x47 /* Titanium PowerBook */ +#define PMAC_TYPE_TITANIUM2 0x48 /* Titanium II PowerBook (no L3, M6) */ +#define PMAC_TYPE_TITANIUM3 0x49 /* Titanium III PowerBook (with L3 & M7) */ +#define PMAC_TYPE_TITANIUM4 0x50 /* Titanium IV PowerBook (with L3 & M9) */ +#define PMAC_TYPE_EMAC 0x50 /* eMac */ +#define PMAC_TYPE_UNKNOWN_CORE99 0x5f + +/* MacRisc2 with UniNorth 2.0 */ +#define PMAC_TYPE_RACKMAC 0x80 /* XServe */ +#define PMAC_TYPE_WINDTUNNEL 0x81 + +/* MacRISC2 machines based on the Pangea chipset + */ +#define PMAC_TYPE_PANGEA_IMAC 0x100 /* Flower Power iMac */ +#define PMAC_TYPE_IBOOK2 0x101 /* iBook2 (polycarbonate) */ +#define PMAC_TYPE_FLAT_PANEL_IMAC 0x102 /* Flat panel iMac */ +#define PMAC_TYPE_UNKNOWN_PANGEA 0x10f + +/* MacRISC2 machines based on the Intrepid chipset + */ +#define PMAC_TYPE_UNKNOWN_INTREPID 0x11f /* Generic */ + +/* MacRISC4 / G5 machines. We don't have per-machine selection here anymore, + * but rather machine families + */ +#define PMAC_TYPE_POWERMAC_G5 0x150 /* U3 & U3H based */ +#define PMAC_TYPE_POWERMAC_G5_U3L 0x151 /* U3L based desktop */ +#define PMAC_TYPE_IMAC_G5 0x152 /* iMac G5 */ +#define PMAC_TYPE_XSERVE_G5 0x153 /* Xserve G5 */ +#define PMAC_TYPE_UNKNOWN_K2 0x19f /* Any other K2 based */ +#define PMAC_TYPE_UNKNOWN_SHASTA 0x19e /* Any other Shasta based */ + +/* + * Motherboard flags + */ + +#define PMAC_MB_CAN_SLEEP 0x00000001 +#define PMAC_MB_HAS_FW_POWER 0x00000002 +#define PMAC_MB_OLD_CORE99 0x00000004 +#define PMAC_MB_MOBILE 0x00000008 +#define PMAC_MB_MAY_SLEEP 0x00000010 + +/* + * Feature calls supported on pmac + * + */ + +/* + * Use this inline wrapper + */ +struct device_node; + +static inline long pmac_call_feature(int selector, struct device_node* node, + long param, long value) +{ + if (!ppc_md.feature_call || !machine_is(powermac)) + return -ENODEV; + return ppc_md.feature_call(selector, node, param, value); +} + +/* PMAC_FTR_SERIAL_ENABLE (struct device_node* node, int param, int value) + * enable/disable an SCC side. Pass the node corresponding to the + * channel side as a parameter. + * param is the type of port + * if param is ored with PMAC_SCC_FLAG_XMON, then the SCC is locked enabled + * for use by xmon. + */ +#define PMAC_FTR_SCC_ENABLE PMAC_FTR_DEF(0) + #define PMAC_SCC_ASYNC 0 + #define PMAC_SCC_IRDA 1 + #define PMAC_SCC_I2S1 2 + #define PMAC_SCC_FLAG_XMON 0x00001000 + +/* PMAC_FTR_MODEM_ENABLE (struct device_node* node, 0, int value) + * enable/disable the internal modem. + */ +#define PMAC_FTR_MODEM_ENABLE PMAC_FTR_DEF(1) + +/* PMAC_FTR_SWIM3_ENABLE (struct device_node* node, 0,int value) + * enable/disable the swim3 (floppy) cell of a mac-io ASIC + */ +#define PMAC_FTR_SWIM3_ENABLE PMAC_FTR_DEF(2) + +/* PMAC_FTR_MESH_ENABLE (struct device_node* node, 0, int value) + * enable/disable the mesh (scsi) cell of a mac-io ASIC + */ +#define PMAC_FTR_MESH_ENABLE PMAC_FTR_DEF(3) + +/* PMAC_FTR_IDE_ENABLE (struct device_node* node, int busID, int value) + * enable/disable an IDE port of a mac-io ASIC + * pass the busID parameter + */ +#define PMAC_FTR_IDE_ENABLE PMAC_FTR_DEF(4) + +/* PMAC_FTR_IDE_RESET (struct device_node* node, int busID, int value) + * assert(1)/release(0) an IDE reset line (mac-io IDE only) + */ +#define PMAC_FTR_IDE_RESET PMAC_FTR_DEF(5) + +/* PMAC_FTR_BMAC_ENABLE (struct device_node* node, 0, int value) + * enable/disable the bmac (ethernet) cell of a mac-io ASIC, also drive + * it's reset line + */ +#define PMAC_FTR_BMAC_ENABLE PMAC_FTR_DEF(6) + +/* PMAC_FTR_GMAC_ENABLE (struct device_node* node, 0, int value) + * enable/disable the gmac (ethernet) cell of an uninorth ASIC. This + * control the cell's clock. + */ +#define PMAC_FTR_GMAC_ENABLE PMAC_FTR_DEF(7) + +/* PMAC_FTR_GMAC_PHY_RESET (struct device_node* node, 0, 0) + * Perform a HW reset of the PHY connected to a gmac controller. + * Pass the gmac device node, not the PHY node. + */ +#define PMAC_FTR_GMAC_PHY_RESET PMAC_FTR_DEF(8) + +/* PMAC_FTR_SOUND_CHIP_ENABLE (struct device_node* node, 0, int value) + * enable/disable the sound chip, whatever it is and provided it can + * actually be controlled + */ +#define PMAC_FTR_SOUND_CHIP_ENABLE PMAC_FTR_DEF(9) + +/* -- add various tweaks related to sound routing -- */ + +/* PMAC_FTR_AIRPORT_ENABLE (struct device_node* node, 0, int value) + * enable/disable the airport card + */ +#define PMAC_FTR_AIRPORT_ENABLE PMAC_FTR_DEF(10) + +/* PMAC_FTR_RESET_CPU (NULL, int cpu_nr, 0) + * toggle the reset line of a CPU on an uninorth-based SMP machine + */ +#define PMAC_FTR_RESET_CPU PMAC_FTR_DEF(11) + +/* PMAC_FTR_USB_ENABLE (struct device_node* node, 0, int value) + * enable/disable an USB cell, along with the power of the USB "pad" + * on keylargo based machines + */ +#define PMAC_FTR_USB_ENABLE PMAC_FTR_DEF(12) + +/* PMAC_FTR_1394_ENABLE (struct device_node* node, 0, int value) + * enable/disable the firewire cell of an uninorth ASIC. + */ +#define PMAC_FTR_1394_ENABLE PMAC_FTR_DEF(13) + +/* PMAC_FTR_1394_CABLE_POWER (struct device_node* node, 0, int value) + * enable/disable the firewire cable power supply of the uninorth + * firewire cell + */ +#define PMAC_FTR_1394_CABLE_POWER PMAC_FTR_DEF(14) + +/* PMAC_FTR_SLEEP_STATE (struct device_node* node, 0, int value) + * set the sleep state of the motherboard. + * + * Pass -1 as value to query for sleep capability + * Pass 1 to set IOs to sleep + * Pass 0 to set IOs to wake + */ +#define PMAC_FTR_SLEEP_STATE PMAC_FTR_DEF(15) + +/* PMAC_FTR_GET_MB_INFO (NULL, selector, 0) + * + * returns some motherboard infos. + * selector: 0 - model id + * 1 - model flags (capabilities) + * 2 - model name (cast to const char *) + */ +#define PMAC_FTR_GET_MB_INFO PMAC_FTR_DEF(16) +#define PMAC_MB_INFO_MODEL 0 +#define PMAC_MB_INFO_FLAGS 1 +#define PMAC_MB_INFO_NAME 2 + +/* PMAC_FTR_READ_GPIO (NULL, int index, 0) + * + * read a GPIO from a mac-io controller of type KeyLargo or Pangea. + * the value returned is a byte (positive), or a negative error code + */ +#define PMAC_FTR_READ_GPIO PMAC_FTR_DEF(17) + +/* PMAC_FTR_WRITE_GPIO (NULL, int index, int value) + * + * write a GPIO of a mac-io controller of type KeyLargo or Pangea. + */ +#define PMAC_FTR_WRITE_GPIO PMAC_FTR_DEF(18) + +/* PMAC_FTR_ENABLE_MPIC + * + * Enable the MPIC cell + */ +#define PMAC_FTR_ENABLE_MPIC PMAC_FTR_DEF(19) + +/* PMAC_FTR_AACK_DELAY_ENABLE (NULL, int enable, 0) + * + * Enable/disable the AACK delay on the northbridge for systems using DFS + */ +#define PMAC_FTR_AACK_DELAY_ENABLE PMAC_FTR_DEF(20) + +/* PMAC_FTR_DEVICE_CAN_WAKE + * + * Used by video drivers to inform system that they can actually perform + * wakeup from sleep + */ +#define PMAC_FTR_DEVICE_CAN_WAKE PMAC_FTR_DEF(22) + + +/* Don't use those directly, they are for the sake of pmac_setup.c */ +extern long pmac_do_feature_call(unsigned int selector, ...); +extern void pmac_feature_init(void); + +/* Video suspend tweak */ +extern void pmac_set_early_video_resume(void (*proc)(void *data), void *data); +extern void pmac_call_early_video_resume(void); + +#define PMAC_FTR_DEF(x) ((0x6660000) | (x)) + +/* The AGP driver registers itself here */ +extern void pmac_register_agp_pm(struct pci_dev *bridge, + int (*suspend)(struct pci_dev *bridge), + int (*resume)(struct pci_dev *bridge)); + +/* Those are meant to be used by video drivers to deal with AGP + * suspend resume properly + */ +extern void pmac_suspend_agp_for_card(struct pci_dev *dev); +extern void pmac_resume_agp_for_card(struct pci_dev *dev); + +/* + * The part below is for use by macio_asic.c only, do not rely + * on the data structures or constants below in a normal driver + * + */ + +#define MAX_MACIO_CHIPS 2 + +enum { + macio_unknown = 0, + macio_grand_central, + macio_ohare, + macio_ohareII, + macio_heathrow, + macio_gatwick, + macio_paddington, + macio_keylargo, + macio_pangea, + macio_intrepid, + macio_keylargo2, + macio_shasta, +}; + +struct macio_chip +{ + struct device_node *of_node; + int type; + const char *name; + int rev; + volatile u32 __iomem *base; + unsigned long flags; + + /* For use by macio_asic PCI driver */ + struct macio_bus lbus; +}; + +extern struct macio_chip macio_chips[MAX_MACIO_CHIPS]; + +#define MACIO_FLAG_SCCA_ON 0x00000001 +#define MACIO_FLAG_SCCB_ON 0x00000002 +#define MACIO_FLAG_SCC_LOCKED 0x00000004 +#define MACIO_FLAG_AIRPORT_ON 0x00000010 +#define MACIO_FLAG_FW_SUPPORTED 0x00000020 + +extern struct macio_chip* macio_find(struct device_node* child, int type); + +#define MACIO_FCR32(macio, r) ((macio)->base + ((r) >> 2)) +#define MACIO_FCR8(macio, r) (((volatile u8 __iomem *)((macio)->base)) + (r)) + +#define MACIO_IN32(r) (in_le32(MACIO_FCR32(macio,r))) +#define MACIO_OUT32(r,v) (out_le32(MACIO_FCR32(macio,r), (v))) +#define MACIO_BIS(r,v) (MACIO_OUT32((r), MACIO_IN32(r) | (v))) +#define MACIO_BIC(r,v) (MACIO_OUT32((r), MACIO_IN32(r) & ~(v))) +#define MACIO_IN8(r) (in_8(MACIO_FCR8(macio,r))) +#define MACIO_OUT8(r,v) (out_8(MACIO_FCR8(macio,r), (v))) + +/* + * Those are exported by pmac feature for internal use by arch code + * only like the platform function callbacks, do not use directly in drivers + */ +extern raw_spinlock_t feature_lock; +extern struct device_node *uninorth_node; +extern u32 __iomem *uninorth_base; + +/* + * Uninorth reg. access. Note that Uni-N regs are big endian + */ + +#define UN_REG(r) (uninorth_base + ((r) >> 2)) +#define UN_IN(r) (in_be32(UN_REG(r))) +#define UN_OUT(r,v) (out_be32(UN_REG(r), (v))) +#define UN_BIS(r,v) (UN_OUT((r), UN_IN(r) | (v))) +#define UN_BIC(r,v) (UN_OUT((r), UN_IN(r) & ~(v))) + +/* Uninorth variant: + * + * 0 = not uninorth + * 1 = U1.x or U2.x + * 3 = U3 + * 4 = U4 + */ +extern int pmac_get_uninorth_variant(void); + +#endif /* __ASM_POWERPC_PMAC_FEATURE_H */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/pmac_low_i2c.h b/arch/powerpc/include/asm/pmac_low_i2c.h new file mode 100644 index 000000000..21bd7297c --- /dev/null +++ b/arch/powerpc/include/asm/pmac_low_i2c.h @@ -0,0 +1,98 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * include/asm-ppc/pmac_low_i2c.h + * + * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org) + */ +#ifndef __PMAC_LOW_I2C_H__ +#define __PMAC_LOW_I2C_H__ +#ifdef __KERNEL__ + +/* i2c mode (based on the platform functions format) */ +enum { + pmac_i2c_mode_dumb = 1, + pmac_i2c_mode_std = 2, + pmac_i2c_mode_stdsub = 3, + pmac_i2c_mode_combined = 4, +}; + +/* RW bit in address */ +enum { + pmac_i2c_read = 0x01, + pmac_i2c_write = 0x00 +}; + +/* i2c bus type */ +enum { + pmac_i2c_bus_keywest = 0, + pmac_i2c_bus_pmu = 1, + pmac_i2c_bus_smu = 2, +}; + +/* i2c bus features */ +enum { + /* can_largesub : supports >1 byte subaddresses (SMU only) */ + pmac_i2c_can_largesub = 0x00000001u, + + /* multibus : device node holds multiple busses, bus number is + * encoded in bits 0xff00 of "reg" of a given device + */ + pmac_i2c_multibus = 0x00000002u, +}; + +/* i2c busses in the system */ +struct pmac_i2c_bus; +struct i2c_adapter; + +/* Init, called early during boot */ +extern int pmac_i2c_init(void); + +/* Lookup an i2c bus for a device-node. The node can be either the bus + * node itself or a device below it. In the case of a multibus, the bus + * node itself is the controller node, else, it's a child of the controller + * node + */ +extern struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node); + +/* Get the address for an i2c device. This strips the bus number if + * necessary. The 7 bits address is returned 1 bit right shifted so that the + * direction can be directly ored in + */ +extern u8 pmac_i2c_get_dev_addr(struct device_node *device); + +/* Get infos about a bus */ +extern struct device_node *pmac_i2c_get_controller(struct pmac_i2c_bus *bus); +extern struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus); +extern int pmac_i2c_get_type(struct pmac_i2c_bus *bus); +extern int pmac_i2c_get_flags(struct pmac_i2c_bus *bus); +extern int pmac_i2c_get_channel(struct pmac_i2c_bus *bus); + +/* i2c layer adapter helpers */ +extern struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus); +extern struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter); + +/* March a device or bus with an i2c adapter structure, to be used by drivers + * to match device-tree nodes with i2c adapters during adapter discovery + * callbacks + */ +extern int pmac_i2c_match_adapter(struct device_node *dev, + struct i2c_adapter *adapter); + + +/* (legacy) Locking functions exposed to i2c-keywest */ +extern int pmac_low_i2c_lock(struct device_node *np); +extern int pmac_low_i2c_unlock(struct device_node *np); + +/* Access functions for platform code */ +extern int pmac_i2c_open(struct pmac_i2c_bus *bus, int polled); +extern void pmac_i2c_close(struct pmac_i2c_bus *bus); +extern int pmac_i2c_setmode(struct pmac_i2c_bus *bus, int mode); +extern int pmac_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize, + u32 subaddr, u8 *data, int len); + +/* Suspend/resume code called by via-pmu directly for now */ +extern void pmac_pfunc_i2c_suspend(void); +extern void pmac_pfunc_i2c_resume(void); + +#endif /* __KERNEL__ */ +#endif /* __PMAC_LOW_I2C_H__ */ diff --git a/arch/powerpc/include/asm/pmac_pfunc.h b/arch/powerpc/include/asm/pmac_pfunc.h new file mode 100644 index 000000000..cee4e9f5b --- /dev/null +++ b/arch/powerpc/include/asm/pmac_pfunc.h @@ -0,0 +1,254 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __PMAC_PFUNC_H__ +#define __PMAC_PFUNC_H__ + +#include <linux/types.h> +#include <linux/list.h> + +/* Flags in command lists */ +#define PMF_FLAGS_ON_INIT 0x80000000u +#define PMF_FLGAS_ON_TERM 0x40000000u +#define PMF_FLAGS_ON_SLEEP 0x20000000u +#define PMF_FLAGS_ON_WAKE 0x10000000u +#define PMF_FLAGS_ON_DEMAND 0x08000000u +#define PMF_FLAGS_INT_GEN 0x04000000u +#define PMF_FLAGS_HIGH_SPEED 0x02000000u +#define PMF_FLAGS_LOW_SPEED 0x01000000u +#define PMF_FLAGS_SIDE_EFFECTS 0x00800000u + +/* + * Arguments to a platform function call. + * + * NOTE: By convention, pointer arguments point to an u32 + */ +struct pmf_args { + union { + u32 v; + u32 *p; + } u[4]; + unsigned int count; +}; + +/* + * A driver capable of interpreting commands provides a handlers + * structure filled with whatever handlers are implemented by this + * driver. Non implemented handlers are left NULL. + * + * PMF_STD_ARGS are the same arguments that are passed to the parser + * and that gets passed back to the various handlers. + * + * Interpreting a given function always start with a begin() call which + * returns an instance data to be passed around subsequent calls, and + * ends with an end() call. This allows the low level driver to implement + * locking policy or per-function instance data. + * + * For interrupt capable functions, irq_enable() is called when a client + * registers, and irq_disable() is called when the last client unregisters + * Note that irq_enable & irq_disable are called within a semaphore held + * by the core, thus you should not try to register yourself to some other + * pmf interrupt during those calls. + */ + +#define PMF_STD_ARGS struct pmf_function *func, void *instdata, \ + struct pmf_args *args + +struct pmf_function; + +struct pmf_handlers { + void * (*begin)(struct pmf_function *func, struct pmf_args *args); + void (*end)(struct pmf_function *func, void *instdata); + + int (*irq_enable)(struct pmf_function *func); + int (*irq_disable)(struct pmf_function *func); + + int (*write_gpio)(PMF_STD_ARGS, u8 value, u8 mask); + int (*read_gpio)(PMF_STD_ARGS, u8 mask, int rshift, u8 xor); + + int (*write_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask); + int (*read_reg32)(PMF_STD_ARGS, u32 offset); + int (*write_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask); + int (*read_reg16)(PMF_STD_ARGS, u32 offset); + int (*write_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask); + int (*read_reg8)(PMF_STD_ARGS, u32 offset); + + int (*delay)(PMF_STD_ARGS, u32 duration); + + int (*wait_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask); + int (*wait_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask); + int (*wait_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask); + + int (*read_i2c)(PMF_STD_ARGS, u32 len); + int (*write_i2c)(PMF_STD_ARGS, u32 len, const u8 *data); + int (*rmw_i2c)(PMF_STD_ARGS, u32 masklen, u32 valuelen, u32 totallen, + const u8 *maskdata, const u8 *valuedata); + + int (*read_cfg)(PMF_STD_ARGS, u32 offset, u32 len); + int (*write_cfg)(PMF_STD_ARGS, u32 offset, u32 len, const u8 *data); + int (*rmw_cfg)(PMF_STD_ARGS, u32 offset, u32 masklen, u32 valuelen, + u32 totallen, const u8 *maskdata, const u8 *valuedata); + + int (*read_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len); + int (*write_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len, const u8 *data); + int (*set_i2c_mode)(PMF_STD_ARGS, int mode); + int (*rmw_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 masklen, u32 valuelen, + u32 totallen, const u8 *maskdata, + const u8 *valuedata); + + int (*read_reg32_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift, + u32 xor); + int (*read_reg16_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift, + u32 xor); + int (*read_reg8_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift, + u32 xor); + + int (*write_reg32_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask); + int (*write_reg16_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask); + int (*write_reg8_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask); + + int (*mask_and_compare)(PMF_STD_ARGS, u32 len, const u8 *maskdata, + const u8 *valuedata); + + struct module *owner; +}; + + +/* + * Drivers who expose platform functions register at init time, this + * causes the platform functions for that device node to be parsed in + * advance and associated with the device. The data structures are + * partially public so a driver can walk the list of platform functions + * and eventually inspect the flags + */ +struct pmf_device; + +struct pmf_function { + /* All functions for a given driver are linked */ + struct list_head link; + + /* Function node & driver data */ + struct device_node *node; + void *driver_data; + + /* For internal use by core */ + struct pmf_device *dev; + + /* The name is the "xxx" in "platform-do-xxx", this is how + * platform functions are identified by this code. Some functions + * only operate for a given target, in which case the phandle is + * here (or 0 if the filter doesn't apply) + */ + const char *name; + u32 phandle; + + /* The flags for that function. You can have several functions + * with the same name and different flag + */ + u32 flags; + + /* The actual tokenized function blob */ + const void *data; + unsigned int length; + + /* Interrupt clients */ + struct list_head irq_clients; + + /* Refcounting */ + struct kref ref; +}; + +/* + * For platform functions that are interrupts, one can register + * irq_client structures. You canNOT use the same structure twice + * as it contains a link member. Also, the callback is called with + * a spinlock held, you must not call back into any of the pmf_* functions + * from within that callback + */ +struct pmf_irq_client { + void (*handler)(void *data); + void *data; + struct module *owner; + struct list_head link; + struct pmf_function *func; +}; + + +/* + * Register/Unregister a function-capable driver and its handlers + */ +extern int pmf_register_driver(struct device_node *np, + struct pmf_handlers *handlers, + void *driverdata); + +extern void pmf_unregister_driver(struct device_node *np); + + +/* + * Register/Unregister interrupt clients + */ +extern int pmf_register_irq_client(struct device_node *np, + const char *name, + struct pmf_irq_client *client); + +extern void pmf_unregister_irq_client(struct pmf_irq_client *client); + +/* + * Called by the handlers when an irq happens + */ +extern void pmf_do_irq(struct pmf_function *func); + + +/* + * Low level call to platform functions. + * + * The phandle can filter on the target object for functions that have + * multiple targets, the flags allow you to restrict the call to a given + * combination of flags. + * + * The args array contains as many arguments as is required by the function, + * this is dependent on the function you are calling, unfortunately Apple + * mechanism provides no way to encode that so you have to get it right at + * the call site. Some functions require no args, in which case, you can + * pass NULL. + * + * You can also pass NULL to the name. This will match any function that has + * the appropriate combination of flags & phandle or you can pass 0 to the + * phandle to match any + */ +extern int pmf_do_functions(struct device_node *np, const char *name, + u32 phandle, u32 flags, struct pmf_args *args); + + + +/* + * High level call to a platform function. + * + * This one looks for the platform-xxx first so you should call it to the + * actual target if any. It will fallback to platform-do-xxx if it can't + * find one. It will also exclusively target functions that have + * the "OnDemand" flag. + */ + +extern int pmf_call_function(struct device_node *target, const char *name, + struct pmf_args *args); + + +/* + * For low latency interrupt usage, you can lookup for on-demand functions + * using the functions below + */ + +extern struct pmf_function *pmf_find_function(struct device_node *target, + const char *name); + +extern struct pmf_function * pmf_get_function(struct pmf_function *func); +extern void pmf_put_function(struct pmf_function *func); + +extern int pmf_call_one(struct pmf_function *func, struct pmf_args *args); + +int pmac_pfunc_base_install(void); + +/* Suspend/resume code called by via-pmu directly for now */ +extern void pmac_pfunc_base_suspend(void); +extern void pmac_pfunc_base_resume(void); + +#endif /* __PMAC_PFUNC_H__ */ diff --git a/arch/powerpc/include/asm/pmc.h b/arch/powerpc/include/asm/pmc.h new file mode 100644 index 000000000..3c09109e7 --- /dev/null +++ b/arch/powerpc/include/asm/pmc.h @@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * pmc.h + * Copyright (C) 2004 David Gibson, IBM Corporation + */ +#ifndef _POWERPC_PMC_H +#define _POWERPC_PMC_H +#ifdef __KERNEL__ + +#include <asm/ptrace.h> + +typedef void (*perf_irq_t)(struct pt_regs *); +extern perf_irq_t perf_irq; + +int reserve_pmc_hardware(perf_irq_t new_perf_irq); +void release_pmc_hardware(void); +void ppc_enable_pmcs(void); + +#ifdef CONFIG_PPC_BOOK3S_64 +#include <asm/lppaca.h> +#include <asm/firmware.h> + +static inline void ppc_set_pmu_inuse(int inuse) +{ +#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_KVM_BOOK3S_HV_POSSIBLE) + if (firmware_has_feature(FW_FEATURE_LPAR)) { +#ifdef CONFIG_PPC_PSERIES + get_lppaca()->pmcregs_in_use = inuse; +#endif + } +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE + get_paca()->pmcregs_in_use = inuse; +#endif +#endif +} + +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE +static inline int ppc_get_pmu_inuse(void) +{ + return get_paca()->pmcregs_in_use; +} +#endif + +extern void power4_enable_pmcs(void); + +#else /* CONFIG_PPC64 */ + +static inline void ppc_set_pmu_inuse(int inuse) { } + +#endif + +#endif /* __KERNEL__ */ +#endif /* _POWERPC_PMC_H */ diff --git a/arch/powerpc/include/asm/pmi.h b/arch/powerpc/include/asm/pmi.h new file mode 100644 index 000000000..478f0a2fe --- /dev/null +++ b/arch/powerpc/include/asm/pmi.h @@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _POWERPC_PMI_H +#define _POWERPC_PMI_H + +/* + * Definitions for talking with PMI device on PowerPC + * + * PMI (Platform Management Interrupt) is a way to communicate + * with the BMC (Baseboard Management Controller) via interrupts. + * Unlike IPMI it is bidirectional and has a low latency. + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Christian Krafft <krafft@de.ibm.com> + */ + +#ifdef __KERNEL__ + +#define PMI_TYPE_FREQ_CHANGE 0x01 +#define PMI_TYPE_POWER_BUTTON 0x02 +#define PMI_READ_TYPE 0 +#define PMI_READ_DATA0 1 +#define PMI_READ_DATA1 2 +#define PMI_READ_DATA2 3 +#define PMI_WRITE_TYPE 4 +#define PMI_WRITE_DATA0 5 +#define PMI_WRITE_DATA1 6 +#define PMI_WRITE_DATA2 7 + +#define PMI_ACK 0x80 + +#define PMI_TIMEOUT 100 + +typedef struct { + u8 type; + u8 data0; + u8 data1; + u8 data2; +} pmi_message_t; + +struct pmi_handler { + struct list_head node; + u8 type; + void (*handle_pmi_message) (pmi_message_t); +}; + +int pmi_register_handler(struct pmi_handler *); +void pmi_unregister_handler(struct pmi_handler *); + +int pmi_send_message(pmi_message_t); + +#endif /* __KERNEL__ */ +#endif /* _POWERPC_PMI_H */ diff --git a/arch/powerpc/include/asm/pnv-ocxl.h b/arch/powerpc/include/asm/pnv-ocxl.h new file mode 100644 index 000000000..d37ededca --- /dev/null +++ b/arch/powerpc/include/asm/pnv-ocxl.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +// Copyright 2017 IBM Corp. +#ifndef _ASM_PNV_OCXL_H +#define _ASM_PNV_OCXL_H + +#include <linux/pci.h> + +#define PNV_OCXL_TL_MAX_TEMPLATE 63 +#define PNV_OCXL_TL_BITS_PER_RATE 4 +#define PNV_OCXL_TL_RATE_BUF_SIZE ((PNV_OCXL_TL_MAX_TEMPLATE+1) * PNV_OCXL_TL_BITS_PER_RATE / 8) + +int pnv_ocxl_get_actag(struct pci_dev *dev, u16 *base, u16 *enabled, u16 *supported); +int pnv_ocxl_get_pasid_count(struct pci_dev *dev, int *count); + +int pnv_ocxl_get_tl_cap(struct pci_dev *dev, long *cap, + char *rate_buf, int rate_buf_size); +int pnv_ocxl_set_tl_conf(struct pci_dev *dev, long cap, + uint64_t rate_buf_phys, int rate_buf_size); + +int pnv_ocxl_get_xsl_irq(struct pci_dev *dev, int *hwirq); +void pnv_ocxl_unmap_xsl_regs(void __iomem *dsisr, void __iomem *dar, + void __iomem *tfc, void __iomem *pe_handle); +int pnv_ocxl_map_xsl_regs(struct pci_dev *dev, void __iomem **dsisr, + void __iomem **dar, void __iomem **tfc, + void __iomem **pe_handle); + +int pnv_ocxl_spa_setup(struct pci_dev *dev, void *spa_mem, int PE_mask, void **platform_data); +void pnv_ocxl_spa_release(void *platform_data); +int pnv_ocxl_spa_remove_pe_from_cache(void *platform_data, int pe_handle); + +#endif /* _ASM_PNV_OCXL_H */ diff --git a/arch/powerpc/include/asm/pnv-pci.h b/arch/powerpc/include/asm/pnv-pci.h new file mode 100644 index 000000000..d0ee0ede5 --- /dev/null +++ b/arch/powerpc/include/asm/pnv-pci.h @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2014 IBM Corp. + */ + +#ifndef _ASM_PNV_PCI_H +#define _ASM_PNV_PCI_H + +#include <linux/pci.h> +#include <linux/pci_hotplug.h> +#include <linux/irq.h> +#include <misc/cxl-base.h> +#include <asm/opal-api.h> + +#define PCI_SLOT_ID_PREFIX (1UL << 63) +#define PCI_SLOT_ID(phb_id, bdfn) \ + (PCI_SLOT_ID_PREFIX | ((uint64_t)(bdfn) << 16) | (phb_id)) +#define PCI_PHB_SLOT_ID(phb_id) (phb_id) + +extern int pnv_pci_get_slot_id(struct device_node *np, uint64_t *id); +extern int pnv_pci_get_device_tree(uint32_t phandle, void *buf, uint64_t len); +extern int pnv_pci_get_presence_state(uint64_t id, uint8_t *state); +extern int pnv_pci_get_power_state(uint64_t id, uint8_t *state); +extern int pnv_pci_set_power_state(uint64_t id, uint8_t state, + struct opal_msg *msg); + +extern int pnv_pci_set_tunnel_bar(struct pci_dev *dev, uint64_t addr, + int enable); +int pnv_phb_to_cxl_mode(struct pci_dev *dev, uint64_t mode); +int pnv_cxl_ioda_msi_setup(struct pci_dev *dev, unsigned int hwirq, + unsigned int virq); +int pnv_cxl_alloc_hwirqs(struct pci_dev *dev, int num); +void pnv_cxl_release_hwirqs(struct pci_dev *dev, int hwirq, int num); +int pnv_cxl_get_irq_count(struct pci_dev *dev); +struct device_node *pnv_pci_get_phb_node(struct pci_dev *dev); +int64_t pnv_opal_pci_msi_eoi(struct irq_chip *chip, unsigned int hw_irq); +bool is_pnv_opal_msi(struct irq_chip *chip); + +#ifdef CONFIG_CXL_BASE +int pnv_cxl_alloc_hwirq_ranges(struct cxl_irq_ranges *irqs, + struct pci_dev *dev, int num); +void pnv_cxl_release_hwirq_ranges(struct cxl_irq_ranges *irqs, + struct pci_dev *dev); +#endif + +struct pnv_php_slot { + struct hotplug_slot slot; + uint64_t id; + char *name; + int slot_no; + unsigned int flags; +#define PNV_PHP_FLAG_BROKEN_PDC 0x1 + struct kref kref; +#define PNV_PHP_STATE_INITIALIZED 0 +#define PNV_PHP_STATE_REGISTERED 1 +#define PNV_PHP_STATE_POPULATED 2 +#define PNV_PHP_STATE_OFFLINE 3 + int state; + int irq; + struct workqueue_struct *wq; + struct device_node *dn; + struct pci_dev *pdev; + struct pci_bus *bus; + bool power_state_check; + u8 attention_state; + void *fdt; + void *dt; + struct of_changeset ocs; + struct pnv_php_slot *parent; + struct list_head children; + struct list_head link; +}; +extern struct pnv_php_slot *pnv_php_find_slot(struct device_node *dn); +extern int pnv_php_set_slot_power_state(struct hotplug_slot *slot, + uint8_t state); + +#endif diff --git a/arch/powerpc/include/asm/powernv.h b/arch/powerpc/include/asm/powernv.h new file mode 100644 index 000000000..e1a858718 --- /dev/null +++ b/arch/powerpc/include/asm/powernv.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2017 IBM Corp. + */ + +#ifndef _ASM_POWERNV_H +#define _ASM_POWERNV_H + +#ifdef CONFIG_PPC_POWERNV +extern void powernv_set_nmmu_ptcr(unsigned long ptcr); + +void pnv_program_cpu_hotplug_lpcr(unsigned int cpu, u64 lpcr_val); + +void pnv_tm_init(void); +#else +static inline void powernv_set_nmmu_ptcr(unsigned long ptcr) { } + +static inline void pnv_tm_init(void) { } +#endif + +#endif /* _ASM_POWERNV_H */ diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h new file mode 100644 index 000000000..d6a3cd147 --- /dev/null +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -0,0 +1,622 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2009 Freescale Semiconductor, Inc. + * + * provides masks and opcode images for use by code generation, emulation + * and for instructions that older assemblers might not know about + */ +#ifndef _ASM_POWERPC_PPC_OPCODE_H +#define _ASM_POWERPC_PPC_OPCODE_H + +#include <asm/asm-const.h> + +#define __REG_R0 0 +#define __REG_R1 1 +#define __REG_R2 2 +#define __REG_R3 3 +#define __REG_R4 4 +#define __REG_R5 5 +#define __REG_R6 6 +#define __REG_R7 7 +#define __REG_R8 8 +#define __REG_R9 9 +#define __REG_R10 10 +#define __REG_R11 11 +#define __REG_R12 12 +#define __REG_R13 13 +#define __REG_R14 14 +#define __REG_R15 15 +#define __REG_R16 16 +#define __REG_R17 17 +#define __REG_R18 18 +#define __REG_R19 19 +#define __REG_R20 20 +#define __REG_R21 21 +#define __REG_R22 22 +#define __REG_R23 23 +#define __REG_R24 24 +#define __REG_R25 25 +#define __REG_R26 26 +#define __REG_R27 27 +#define __REG_R28 28 +#define __REG_R29 29 +#define __REG_R30 30 +#define __REG_R31 31 + +#define __REGA0_0 0 +#define __REGA0_R1 1 +#define __REGA0_R2 2 +#define __REGA0_R3 3 +#define __REGA0_R4 4 +#define __REGA0_R5 5 +#define __REGA0_R6 6 +#define __REGA0_R7 7 +#define __REGA0_R8 8 +#define __REGA0_R9 9 +#define __REGA0_R10 10 +#define __REGA0_R11 11 +#define __REGA0_R12 12 +#define __REGA0_R13 13 +#define __REGA0_R14 14 +#define __REGA0_R15 15 +#define __REGA0_R16 16 +#define __REGA0_R17 17 +#define __REGA0_R18 18 +#define __REGA0_R19 19 +#define __REGA0_R20 20 +#define __REGA0_R21 21 +#define __REGA0_R22 22 +#define __REGA0_R23 23 +#define __REGA0_R24 24 +#define __REGA0_R25 25 +#define __REGA0_R26 26 +#define __REGA0_R27 27 +#define __REGA0_R28 28 +#define __REGA0_R29 29 +#define __REGA0_R30 30 +#define __REGA0_R31 31 + +#define IMM_L(i) ((uintptr_t)(i) & 0xffff) +#define IMM_DS(i) ((uintptr_t)(i) & 0xfffc) + +/* + * 16-bit immediate helper macros: HA() is for use with sign-extending instrs + * (e.g. LD, ADDI). If the bottom 16 bits is "-ve", add another bit into the + * top half to negate the effect (i.e. 0xffff + 1 = 0x(1)0000). + */ +#define IMM_H(i) ((uintptr_t)(i)>>16) +#define IMM_HA(i) (((uintptr_t)(i)>>16) + \ + (((uintptr_t)(i) & 0x8000) >> 15)) + + +/* opcode and xopcode for instructions */ +#define OP_TRAP 3 +#define OP_TRAP_64 2 + +#define OP_31_XOP_TRAP 4 +#define OP_31_XOP_LDX 21 +#define OP_31_XOP_LWZX 23 +#define OP_31_XOP_LDUX 53 +#define OP_31_XOP_DCBST 54 +#define OP_31_XOP_LWZUX 55 +#define OP_31_XOP_TRAP_64 68 +#define OP_31_XOP_DCBF 86 +#define OP_31_XOP_LBZX 87 +#define OP_31_XOP_STDX 149 +#define OP_31_XOP_STWX 151 +#define OP_31_XOP_STDUX 181 +#define OP_31_XOP_STWUX 183 +#define OP_31_XOP_STBX 215 +#define OP_31_XOP_LBZUX 119 +#define OP_31_XOP_STBUX 247 +#define OP_31_XOP_LHZX 279 +#define OP_31_XOP_LHZUX 311 +#define OP_31_XOP_MSGSNDP 142 +#define OP_31_XOP_MSGCLRP 174 +#define OP_31_XOP_TLBIE 306 +#define OP_31_XOP_MFSPR 339 +#define OP_31_XOP_LWAX 341 +#define OP_31_XOP_LHAX 343 +#define OP_31_XOP_LWAUX 373 +#define OP_31_XOP_LHAUX 375 +#define OP_31_XOP_STHX 407 +#define OP_31_XOP_STHUX 439 +#define OP_31_XOP_MTSPR 467 +#define OP_31_XOP_DCBI 470 +#define OP_31_XOP_LDBRX 532 +#define OP_31_XOP_LWBRX 534 +#define OP_31_XOP_TLBSYNC 566 +#define OP_31_XOP_STDBRX 660 +#define OP_31_XOP_STWBRX 662 +#define OP_31_XOP_STFSX 663 +#define OP_31_XOP_STFSUX 695 +#define OP_31_XOP_STFDX 727 +#define OP_31_XOP_STFDUX 759 +#define OP_31_XOP_LHBRX 790 +#define OP_31_XOP_LFIWAX 855 +#define OP_31_XOP_LFIWZX 887 +#define OP_31_XOP_STHBRX 918 +#define OP_31_XOP_STFIWX 983 + +/* VSX Scalar Load Instructions */ +#define OP_31_XOP_LXSDX 588 +#define OP_31_XOP_LXSSPX 524 +#define OP_31_XOP_LXSIWAX 76 +#define OP_31_XOP_LXSIWZX 12 + +/* VSX Scalar Store Instructions */ +#define OP_31_XOP_STXSDX 716 +#define OP_31_XOP_STXSSPX 652 +#define OP_31_XOP_STXSIWX 140 + +/* VSX Vector Load Instructions */ +#define OP_31_XOP_LXVD2X 844 +#define OP_31_XOP_LXVW4X 780 + +/* VSX Vector Load and Splat Instruction */ +#define OP_31_XOP_LXVDSX 332 + +/* VSX Vector Store Instructions */ +#define OP_31_XOP_STXVD2X 972 +#define OP_31_XOP_STXVW4X 908 + +#define OP_31_XOP_LFSX 535 +#define OP_31_XOP_LFSUX 567 +#define OP_31_XOP_LFDX 599 +#define OP_31_XOP_LFDUX 631 + +/* VMX Vector Load Instructions */ +#define OP_31_XOP_LVX 103 + +/* VMX Vector Store Instructions */ +#define OP_31_XOP_STVX 231 + +/* Prefixed Instructions */ +#define OP_PREFIX 1 + +#define OP_31 31 +#define OP_LWZ 32 +#define OP_STFS 52 +#define OP_STFSU 53 +#define OP_STFD 54 +#define OP_STFDU 55 +#define OP_LD 58 +#define OP_LWZU 33 +#define OP_LBZ 34 +#define OP_LBZU 35 +#define OP_STW 36 +#define OP_STWU 37 +#define OP_STD 62 +#define OP_STB 38 +#define OP_STBU 39 +#define OP_LHZ 40 +#define OP_LHZU 41 +#define OP_LHA 42 +#define OP_LHAU 43 +#define OP_STH 44 +#define OP_STHU 45 +#define OP_LMW 46 +#define OP_STMW 47 +#define OP_LFS 48 +#define OP_LFSU 49 +#define OP_LFD 50 +#define OP_LFDU 51 +#define OP_STFS 52 +#define OP_STFSU 53 +#define OP_STFD 54 +#define OP_STFDU 55 +#define OP_LQ 56 + +/* sorted alphabetically */ +#define PPC_INST_BCCTR_FLUSH 0x4c400420 +#define PPC_INST_COPY 0x7c20060c +#define PPC_INST_DCBA 0x7c0005ec +#define PPC_INST_DCBA_MASK 0xfc0007fe +#define PPC_INST_DSSALL 0x7e00066c +#define PPC_INST_ISEL 0x7c00001e +#define PPC_INST_ISEL_MASK 0xfc00003e +#define PPC_INST_LSWI 0x7c0004aa +#define PPC_INST_LSWX 0x7c00042a +#define PPC_INST_LWSYNC 0x7c2004ac +#define PPC_INST_SYNC 0x7c0004ac +#define PPC_INST_SYNC_MASK 0xfc0007fe +#define PPC_INST_ISYNC 0x4c00012c +#define PPC_INST_MCRXR 0x7c000400 +#define PPC_INST_MCRXR_MASK 0xfc0007fe +#define PPC_INST_MFSPR_PVR 0x7c1f42a6 +#define PPC_INST_MFSPR_PVR_MASK 0xfc1ffffe +#define PPC_INST_MTMSRD 0x7c000164 +#define PPC_INST_NOP 0x60000000 +#define PPC_INST_POPCNTB 0x7c0000f4 +#define PPC_INST_POPCNTB_MASK 0xfc0007fe +#define PPC_INST_RFEBB 0x4c000124 +#define PPC_INST_RFID 0x4c000024 +#define PPC_INST_MFSPR 0x7c0002a6 +#define PPC_INST_MFSPR_DSCR 0x7c1102a6 +#define PPC_INST_MFSPR_DSCR_MASK 0xfc1ffffe +#define PPC_INST_MTSPR_DSCR 0x7c1103a6 +#define PPC_INST_MTSPR_DSCR_MASK 0xfc1ffffe +#define PPC_INST_MFSPR_DSCR_USER 0x7c0302a6 +#define PPC_INST_MFSPR_DSCR_USER_MASK 0xfc1ffffe +#define PPC_INST_MTSPR_DSCR_USER 0x7c0303a6 +#define PPC_INST_MTSPR_DSCR_USER_MASK 0xfc1ffffe +#define PPC_INST_SC 0x44000002 +#define PPC_INST_STRING 0x7c00042a +#define PPC_INST_STRING_MASK 0xfc0007fe +#define PPC_INST_STRING_GEN_MASK 0xfc00067e +#define PPC_INST_STSWI 0x7c0005aa +#define PPC_INST_STSWX 0x7c00052a +#define PPC_INST_TRECHKPT 0x7c0007dd +#define PPC_INST_TRECLAIM 0x7c00075d +#define PPC_INST_TSR 0x7c0005dd +#define PPC_INST_LD 0xe8000000 +#define PPC_INST_STD 0xf8000000 +#define PPC_INST_MFLR 0x7c0802a6 +#define PPC_INST_MTCTR 0x7c0903a6 +#define PPC_INST_ADDI 0x38000000 +#define PPC_INST_ADDIS 0x3c000000 +#define PPC_INST_ADD 0x7c000214 +#define PPC_INST_BLR 0x4e800020 +#define PPC_INST_BCTR 0x4e800420 +#define PPC_INST_BCTRL 0x4e800421 +#define PPC_INST_DIVD 0x7c0003d2 +#define PPC_INST_RLDICR 0x78000004 +#define PPC_INST_ORI 0x60000000 +#define PPC_INST_ORIS 0x64000000 +#define PPC_INST_BRANCH 0x48000000 +#define PPC_INST_BRANCH_COND 0x40800000 + +/* Prefixes */ +#define PPC_INST_LFS 0xc0000000 +#define PPC_INST_STFS 0xd0000000 +#define PPC_INST_LFD 0xc8000000 +#define PPC_INST_STFD 0xd8000000 +#define PPC_PREFIX_MLS 0x06000000 +#define PPC_PREFIX_8LS 0x04000000 + +/* Prefixed instructions */ +#define PPC_INST_PLD 0xe4000000 +#define PPC_INST_PSTD 0xf4000000 + +/* macros to insert fields into opcodes */ +#define ___PPC_RA(a) (((a) & 0x1f) << 16) +#define ___PPC_RB(b) (((b) & 0x1f) << 11) +#define ___PPC_RC(c) (((c) & 0x1f) << 6) +#define ___PPC_RS(s) (((s) & 0x1f) << 21) +#define ___PPC_RT(t) ___PPC_RS(t) +#define ___PPC_R(r) (((r) & 0x1) << 16) +#define ___PPC_PRS(prs) (((prs) & 0x1) << 17) +#define ___PPC_RIC(ric) (((ric) & 0x3) << 18) +#define __PPC_RA(a) ___PPC_RA(__REG_##a) +#define __PPC_RA0(a) ___PPC_RA(__REGA0_##a) +#define __PPC_RB(b) ___PPC_RB(__REG_##b) +#define __PPC_RS(s) ___PPC_RS(__REG_##s) +#define __PPC_RT(t) ___PPC_RT(__REG_##t) +#define __PPC_XA(a) ((((a) & 0x1f) << 16) | (((a) & 0x20) >> 3)) +#define __PPC_XB(b) ((((b) & 0x1f) << 11) | (((b) & 0x20) >> 4)) +#define __PPC_XS(s) ((((s) & 0x1f) << 21) | (((s) & 0x20) >> 5)) +#define __PPC_XT(s) __PPC_XS(s) +#define __PPC_T_TLB(t) (((t) & 0x3) << 21) +#define __PPC_WC(w) (((w) & 0x3) << 21) +#define __PPC_WS(w) (((w) & 0x1f) << 11) +#define __PPC_SH(s) __PPC_WS(s) +#define __PPC_SH64(s) (__PPC_SH(s) | (((s) & 0x20) >> 4)) +#define __PPC_MB(s) ___PPC_RC(s) +#define __PPC_ME(s) (((s) & 0x1f) << 1) +#define __PPC_MB64(s) (__PPC_MB(s) | ((s) & 0x20)) +#define __PPC_ME64(s) __PPC_MB64(s) +#define __PPC_BI(s) (((s) & 0x1f) << 16) +#define __PPC_CT(t) (((t) & 0x0f) << 21) +#define __PPC_SPR(r) ((((r) & 0x1f) << 16) | ((((r) >> 5) & 0x1f) << 11)) +#define __PPC_RC21 (0x1 << 10) +#define __PPC_PRFX_R(r) (((r) & 0x1) << 20) + +/* + * Both low and high 16 bits are added as SIGNED additions, so if low 16 bits + * has high bit set, high 16 bits must be adjusted. These macros do that (stolen + * from binutils). + */ +#define PPC_LO(v) ((v) & 0xffff) +#define PPC_HI(v) (((v) >> 16) & 0xffff) +#define PPC_HA(v) PPC_HI((v) + 0x8000) + +/* + * Only use the larx hint bit on 64bit CPUs. e500v1/v2 based CPUs will treat a + * larx with EH set as an illegal instruction. + */ +#ifdef CONFIG_PPC64 +#define __PPC_EH(eh) (((eh) & 0x1) << 0) +#else +#define __PPC_EH(eh) 0 +#endif + +/* Base instruction encoding */ +#define PPC_RAW_CP_ABORT (0x7c00068c) +#define PPC_RAW_COPY(a, b) (PPC_INST_COPY | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_DARN(t, l) (0x7c0005e6 | ___PPC_RT(t) | (((l) & 0x3) << 16)) +#define PPC_RAW_DCBAL(a, b) (0x7c2005ec | __PPC_RA(a) | __PPC_RB(b)) +#define PPC_RAW_DCBZL(a, b) (0x7c2007ec | __PPC_RA(a) | __PPC_RB(b)) +#define PPC_RAW_LQARX(t, a, b, eh) (0x7c000228 | ___PPC_RT(t) | ___PPC_RA(a) | ___PPC_RB(b) | __PPC_EH(eh)) +#define PPC_RAW_LDARX(t, a, b, eh) (0x7c0000a8 | ___PPC_RT(t) | ___PPC_RA(a) | ___PPC_RB(b) | __PPC_EH(eh)) +#define PPC_RAW_LWARX(t, a, b, eh) (0x7c000028 | ___PPC_RT(t) | ___PPC_RA(a) | ___PPC_RB(b) | __PPC_EH(eh)) +#define PPC_RAW_PHWSYNC (0x7c8004ac) +#define PPC_RAW_PLWSYNC (0x7ca004ac) +#define PPC_RAW_STQCX(t, a, b) (0x7c00016d | ___PPC_RT(t) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_MADDHD(t, a, b, c) (0x10000030 | ___PPC_RT(t) | ___PPC_RA(a) | ___PPC_RB(b) | ___PPC_RC(c)) +#define PPC_RAW_MADDHDU(t, a, b, c) (0x10000031 | ___PPC_RT(t) | ___PPC_RA(a) | ___PPC_RB(b) | ___PPC_RC(c)) +#define PPC_RAW_MADDLD(t, a, b, c) (0x10000033 | ___PPC_RT(t) | ___PPC_RA(a) | ___PPC_RB(b) | ___PPC_RC(c)) +#define PPC_RAW_MSGSND(b) (0x7c00019c | ___PPC_RB(b)) +#define PPC_RAW_MSGSYNC (0x7c0006ec) +#define PPC_RAW_MSGCLR(b) (0x7c0001dc | ___PPC_RB(b)) +#define PPC_RAW_MSGSNDP(b) (0x7c00011c | ___PPC_RB(b)) +#define PPC_RAW_MSGCLRP(b) (0x7c00015c | ___PPC_RB(b)) +#define PPC_RAW_PASTE(a, b) (0x7c20070d | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_POPCNTB(a, s) (PPC_INST_POPCNTB | __PPC_RA(a) | __PPC_RS(s)) +#define PPC_RAW_POPCNTD(a, s) (0x7c0003f4 | __PPC_RA(a) | __PPC_RS(s)) +#define PPC_RAW_POPCNTW(a, s) (0x7c0002f4 | __PPC_RA(a) | __PPC_RS(s)) +#define PPC_RAW_RFCI (0x4c000066) +#define PPC_RAW_RFDI (0x4c00004e) +#define PPC_RAW_RFMCI (0x4c00004c) +#define PPC_RAW_TLBILX(t, a, b) (0x7c000024 | __PPC_T_TLB(t) | __PPC_RA0(a) | __PPC_RB(b)) +#define PPC_RAW_WAIT(w) (0x7c00007c | __PPC_WC(w)) +#define PPC_RAW_TLBIE(lp, a) (0x7c000264 | ___PPC_RB(a) | ___PPC_RS(lp)) +#define PPC_RAW_TLBIE_5(rb, rs, ric, prs, r) \ + (0x7c000264 | ___PPC_RB(rb) | ___PPC_RS(rs) | ___PPC_RIC(ric) | ___PPC_PRS(prs) | ___PPC_R(r)) +#define PPC_RAW_TLBIEL(rb, rs, ric, prs, r) \ + (0x7c000224 | ___PPC_RB(rb) | ___PPC_RS(rs) | ___PPC_RIC(ric) | ___PPC_PRS(prs) | ___PPC_R(r)) +#define PPC_RAW_TLBSRX_DOT(a, b) (0x7c0006a5 | __PPC_RA0(a) | __PPC_RB(b)) +#define PPC_RAW_TLBIVAX(a, b) (0x7c000624 | __PPC_RA0(a) | __PPC_RB(b)) +#define PPC_RAW_ERATWE(s, a, w) (0x7c0001a6 | __PPC_RS(s) | __PPC_RA(a) | __PPC_WS(w)) +#define PPC_RAW_ERATRE(s, a, w) (0x7c000166 | __PPC_RS(s) | __PPC_RA(a) | __PPC_WS(w)) +#define PPC_RAW_ERATILX(t, a, b) (0x7c000066 | __PPC_T_TLB(t) | __PPC_RA0(a) | __PPC_RB(b)) +#define PPC_RAW_ERATIVAX(s, a, b) (0x7c000666 | __PPC_RS(s) | __PPC_RA0(a) | __PPC_RB(b)) +#define PPC_RAW_ERATSX(t, a, w) (0x7c000126 | __PPC_RS(t) | __PPC_RA0(a) | __PPC_RB(b)) +#define PPC_RAW_ERATSX_DOT(t, a, w) (0x7c000127 | __PPC_RS(t) | __PPC_RA0(a) | __PPC_RB(b)) +#define PPC_RAW_SLBFEE_DOT(t, b) (0x7c0007a7 | __PPC_RT(t) | __PPC_RB(b)) +#define __PPC_RAW_SLBFEE_DOT(t, b) (0x7c0007a7 | ___PPC_RT(t) | ___PPC_RB(b)) +#define PPC_RAW_ICBT(c, a, b) (0x7c00002c | __PPC_CT(c) | __PPC_RA0(a) | __PPC_RB(b)) +#define PPC_RAW_LBZCIX(t, a, b) (0x7c0006aa | __PPC_RT(t) | __PPC_RA(a) | __PPC_RB(b)) +#define PPC_RAW_STBCIX(s, a, b) (0x7c0007aa | __PPC_RS(s) | __PPC_RA(a) | __PPC_RB(b)) +#define PPC_RAW_DCBFPS(a, b) (0x7c0000ac | ___PPC_RA(a) | ___PPC_RB(b) | (4 << 21)) +#define PPC_RAW_DCBSTPS(a, b) (0x7c0000ac | ___PPC_RA(a) | ___PPC_RB(b) | (6 << 21)) +/* + * Define what the VSX XX1 form instructions will look like, then add + * the 128 bit load store instructions based on that. + */ +#define VSX_XX1(s, a, b) (__PPC_XS(s) | __PPC_RA(a) | __PPC_RB(b)) +#define VSX_XX3(t, a, b) (__PPC_XT(t) | __PPC_XA(a) | __PPC_XB(b)) +#define PPC_RAW_STXVD2X(s, a, b) (0x7c000798 | VSX_XX1((s), a, b)) +#define PPC_RAW_LXVD2X(s, a, b) (0x7c000698 | VSX_XX1((s), a, b)) +#define PPC_RAW_MFVRD(a, t) (0x7c000066 | VSX_XX1((t) + 32, a, R0)) +#define PPC_RAW_MTVRD(t, a) (0x7c000166 | VSX_XX1((t) + 32, a, R0)) +#define PPC_RAW_VPMSUMW(t, a, b) (0x10000488 | VSX_XX3((t), a, b)) +#define PPC_RAW_VPMSUMD(t, a, b) (0x100004c8 | VSX_XX3((t), a, b)) +#define PPC_RAW_XXLOR(t, a, b) (0xf0000490 | VSX_XX3((t), a, b)) +#define PPC_RAW_XXSWAPD(t, a) (0xf0000250 | VSX_XX3((t), a, a)) +#define PPC_RAW_XVCPSGNDP(t, a, b) ((0xf0000780 | VSX_XX3((t), (a), (b)))) +#define PPC_RAW_VPERMXOR(vrt, vra, vrb, vrc) \ + ((0x1000002d | ___PPC_RT(vrt) | ___PPC_RA(vra) | ___PPC_RB(vrb) | (((vrc) & 0x1f) << 6))) +#define PPC_RAW_NAP (0x4c000364) +#define PPC_RAW_SLEEP (0x4c0003a4) +#define PPC_RAW_WINKLE (0x4c0003e4) +#define PPC_RAW_STOP (0x4c0002e4) +#define PPC_RAW_CLRBHRB (0x7c00035c) +#define PPC_RAW_MFBHRBE(r, n) (0x7c00025c | __PPC_RT(r) | (((n) & 0x3ff) << 11)) +#define PPC_RAW_TRECHKPT (PPC_INST_TRECHKPT) +#define PPC_RAW_TRECLAIM(r) (PPC_INST_TRECLAIM | __PPC_RA(r)) +#define PPC_RAW_TABORT(r) (0x7c00071d | __PPC_RA(r)) +#define TMRN(x) ((((x) & 0x1f) << 16) | (((x) & 0x3e0) << 6)) +#define PPC_RAW_MTTMR(tmr, r) (0x7c0003dc | TMRN(tmr) | ___PPC_RS(r)) +#define PPC_RAW_MFTMR(tmr, r) (0x7c0002dc | TMRN(tmr) | ___PPC_RT(r)) +#define PPC_RAW_ICSWX(s, a, b) (0x7c00032d | ___PPC_RS(s) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_ICSWEPX(s, a, b) (0x7c00076d | ___PPC_RS(s) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_SLBIA(IH) (0x7c0003e4 | (((IH) & 0x7) << 21)) +#define PPC_RAW_VCMPEQUD_RC(vrt, vra, vrb) \ + (0x100000c7 | ___PPC_RT(vrt) | ___PPC_RA(vra) | ___PPC_RB(vrb) | __PPC_RC21) +#define PPC_RAW_VCMPEQUB_RC(vrt, vra, vrb) \ + (0x10000006 | ___PPC_RT(vrt) | ___PPC_RA(vra) | ___PPC_RB(vrb) | __PPC_RC21) +#define PPC_RAW_LD(r, base, i) (PPC_INST_LD | ___PPC_RT(r) | ___PPC_RA(base) | IMM_DS(i)) +#define PPC_RAW_LWZ(r, base, i) (0x80000000 | ___PPC_RT(r) | ___PPC_RA(base) | IMM_L(i)) +#define PPC_RAW_LWZX(t, a, b) (0x7c00002e | ___PPC_RT(t) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_STD(r, base, i) (PPC_INST_STD | ___PPC_RS(r) | ___PPC_RA(base) | IMM_DS(i)) +#define PPC_RAW_STDCX(s, a, b) (0x7c0001ad | ___PPC_RS(s) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_LFSX(t, a, b) (0x7c00042e | ___PPC_RT(t) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_STFSX(s, a, b) (0x7c00052e | ___PPC_RS(s) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_LFDX(t, a, b) (0x7c0004ae | ___PPC_RT(t) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_STFDX(s, a, b) (0x7c0005ae | ___PPC_RS(s) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_LVX(t, a, b) (0x7c0000ce | ___PPC_RT(t) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_STVX(s, a, b) (0x7c0001ce | ___PPC_RS(s) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_ADD(t, a, b) (PPC_INST_ADD | ___PPC_RT(t) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_ADD_DOT(t, a, b) (PPC_INST_ADD | ___PPC_RT(t) | ___PPC_RA(a) | ___PPC_RB(b) | 0x1) +#define PPC_RAW_ADDC(t, a, b) (0x7c000014 | ___PPC_RT(t) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_ADDC_DOT(t, a, b) (0x7c000014 | ___PPC_RT(t) | ___PPC_RA(a) | ___PPC_RB(b) | 0x1) +#define PPC_RAW_NOP() (PPC_INST_NOP) +#define PPC_RAW_BLR() (PPC_INST_BLR) +#define PPC_RAW_BLRL() (0x4e800021) +#define PPC_RAW_MTLR(r) (0x7c0803a6 | ___PPC_RT(r)) +#define PPC_RAW_BCTR() (PPC_INST_BCTR) +#define PPC_RAW_MTCTR(r) (PPC_INST_MTCTR | ___PPC_RT(r)) +#define PPC_RAW_ADDI(d, a, i) (PPC_INST_ADDI | ___PPC_RT(d) | ___PPC_RA(a) | IMM_L(i)) +#define PPC_RAW_LI(r, i) PPC_RAW_ADDI(r, 0, i) +#define PPC_RAW_ADDIS(d, a, i) (PPC_INST_ADDIS | ___PPC_RT(d) | ___PPC_RA(a) | IMM_L(i)) +#define PPC_RAW_LIS(r, i) PPC_RAW_ADDIS(r, 0, i) +#define PPC_RAW_STDX(r, base, b) (0x7c00012a | ___PPC_RS(r) | ___PPC_RA(base) | ___PPC_RB(b)) +#define PPC_RAW_STDU(r, base, i) (0xf8000001 | ___PPC_RS(r) | ___PPC_RA(base) | ((i) & 0xfffc)) +#define PPC_RAW_STW(r, base, i) (0x90000000 | ___PPC_RS(r) | ___PPC_RA(base) | IMM_L(i)) +#define PPC_RAW_STWU(r, base, i) (0x94000000 | ___PPC_RS(r) | ___PPC_RA(base) | IMM_L(i)) +#define PPC_RAW_STH(r, base, i) (0xb0000000 | ___PPC_RS(r) | ___PPC_RA(base) | IMM_L(i)) +#define PPC_RAW_STB(r, base, i) (0x98000000 | ___PPC_RS(r) | ___PPC_RA(base) | IMM_L(i)) +#define PPC_RAW_LBZ(r, base, i) (0x88000000 | ___PPC_RT(r) | ___PPC_RA(base) | IMM_L(i)) +#define PPC_RAW_LDX(r, base, b) (0x7c00002a | ___PPC_RT(r) | ___PPC_RA(base) | ___PPC_RB(b)) +#define PPC_RAW_LHZ(r, base, i) (0xa0000000 | ___PPC_RT(r) | ___PPC_RA(base) | IMM_L(i)) +#define PPC_RAW_LHBRX(r, base, b) (0x7c00062c | ___PPC_RT(r) | ___PPC_RA(base) | ___PPC_RB(b)) +#define PPC_RAW_LWBRX(r, base, b) (0x7c00042c | ___PPC_RT(r) | ___PPC_RA(base) | ___PPC_RB(b)) +#define PPC_RAW_LDBRX(r, base, b) (0x7c000428 | ___PPC_RT(r) | ___PPC_RA(base) | ___PPC_RB(b)) +#define PPC_RAW_STWCX(s, a, b) (0x7c00012d | ___PPC_RS(s) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_CMPWI(a, i) (0x2c000000 | ___PPC_RA(a) | IMM_L(i)) +#define PPC_RAW_CMPDI(a, i) (0x2c200000 | ___PPC_RA(a) | IMM_L(i)) +#define PPC_RAW_CMPW(a, b) (0x7c000000 | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_CMPD(a, b) (0x7c200000 | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_CMPLWI(a, i) (0x28000000 | ___PPC_RA(a) | IMM_L(i)) +#define PPC_RAW_CMPLDI(a, i) (0x28200000 | ___PPC_RA(a) | IMM_L(i)) +#define PPC_RAW_CMPLW(a, b) (0x7c000040 | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_CMPLD(a, b) (0x7c200040 | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_SUB(d, a, b) (0x7c000050 | ___PPC_RT(d) | ___PPC_RB(a) | ___PPC_RA(b)) +#define PPC_RAW_MULD(d, a, b) (0x7c0001d2 | ___PPC_RT(d) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_MULW(d, a, b) (0x7c0001d6 | ___PPC_RT(d) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_MULHWU(d, a, b) (0x7c000016 | ___PPC_RT(d) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_MULI(d, a, i) (0x1c000000 | ___PPC_RT(d) | ___PPC_RA(a) | IMM_L(i)) +#define PPC_RAW_DIVWU(d, a, b) (0x7c000396 | ___PPC_RT(d) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_DIVDU(d, a, b) (0x7c000392 | ___PPC_RT(d) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_DIVDE(t, a, b) (0x7c000352 | ___PPC_RT(t) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_DIVDE_DOT(t, a, b) (0x7c000352 | ___PPC_RT(t) | ___PPC_RA(a) | ___PPC_RB(b) | 0x1) +#define PPC_RAW_DIVDEU(t, a, b) (0x7c000312 | ___PPC_RT(t) | ___PPC_RA(a) | ___PPC_RB(b)) +#define PPC_RAW_DIVDEU_DOT(t, a, b) (0x7c000312 | ___PPC_RT(t) | ___PPC_RA(a) | ___PPC_RB(b) | 0x1) +#define PPC_RAW_AND(d, a, b) (0x7c000038 | ___PPC_RA(d) | ___PPC_RS(a) | ___PPC_RB(b)) +#define PPC_RAW_ANDI(d, a, i) (0x70000000 | ___PPC_RA(d) | ___PPC_RS(a) | IMM_L(i)) +#define PPC_RAW_AND_DOT(d, a, b) (0x7c000039 | ___PPC_RA(d) | ___PPC_RS(a) | ___PPC_RB(b)) +#define PPC_RAW_OR(d, a, b) (0x7c000378 | ___PPC_RA(d) | ___PPC_RS(a) | ___PPC_RB(b)) +#define PPC_RAW_MR(d, a) PPC_RAW_OR(d, a, a) +#define PPC_RAW_ORI(d, a, i) (PPC_INST_ORI | ___PPC_RA(d) | ___PPC_RS(a) | IMM_L(i)) +#define PPC_RAW_ORIS(d, a, i) (PPC_INST_ORIS | ___PPC_RA(d) | ___PPC_RS(a) | IMM_L(i)) +#define PPC_RAW_XOR(d, a, b) (0x7c000278 | ___PPC_RA(d) | ___PPC_RS(a) | ___PPC_RB(b)) +#define PPC_RAW_XORI(d, a, i) (0x68000000 | ___PPC_RA(d) | ___PPC_RS(a) | IMM_L(i)) +#define PPC_RAW_XORIS(d, a, i) (0x6c000000 | ___PPC_RA(d) | ___PPC_RS(a) | IMM_L(i)) +#define PPC_RAW_EXTSW(d, a) (0x7c0007b4 | ___PPC_RA(d) | ___PPC_RS(a)) +#define PPC_RAW_SLW(d, a, s) (0x7c000030 | ___PPC_RA(d) | ___PPC_RS(a) | ___PPC_RB(s)) +#define PPC_RAW_SLD(d, a, s) (0x7c000036 | ___PPC_RA(d) | ___PPC_RS(a) | ___PPC_RB(s)) +#define PPC_RAW_SRW(d, a, s) (0x7c000430 | ___PPC_RA(d) | ___PPC_RS(a) | ___PPC_RB(s)) +#define PPC_RAW_SRAW(d, a, s) (0x7c000630 | ___PPC_RA(d) | ___PPC_RS(a) | ___PPC_RB(s)) +#define PPC_RAW_SRAWI(d, a, i) (0x7c000670 | ___PPC_RA(d) | ___PPC_RS(a) | __PPC_SH(i)) +#define PPC_RAW_SRD(d, a, s) (0x7c000436 | ___PPC_RA(d) | ___PPC_RS(a) | ___PPC_RB(s)) +#define PPC_RAW_SRAD(d, a, s) (0x7c000634 | ___PPC_RA(d) | ___PPC_RS(a) | ___PPC_RB(s)) +#define PPC_RAW_SRADI(d, a, i) (0x7c000674 | ___PPC_RA(d) | ___PPC_RS(a) | __PPC_SH64(i)) +#define PPC_RAW_RLWINM(d, a, i, mb, me) (0x54000000 | ___PPC_RA(d) | ___PPC_RS(a) | __PPC_SH(i) | __PPC_MB(mb) | __PPC_ME(me)) +#define PPC_RAW_RLWINM_DOT(d, a, i, mb, me) \ + (0x54000001 | ___PPC_RA(d) | ___PPC_RS(a) | __PPC_SH(i) | __PPC_MB(mb) | __PPC_ME(me)) +#define PPC_RAW_RLWIMI(d, a, i, mb, me) (0x50000000 | ___PPC_RA(d) | ___PPC_RS(a) | __PPC_SH(i) | __PPC_MB(mb) | __PPC_ME(me)) +#define PPC_RAW_RLDICL(d, a, i, mb) (0x78000000 | ___PPC_RA(d) | ___PPC_RS(a) | __PPC_SH64(i) | __PPC_MB64(mb)) +#define PPC_RAW_RLDICR(d, a, i, me) (PPC_INST_RLDICR | ___PPC_RA(d) | ___PPC_RS(a) | __PPC_SH64(i) | __PPC_ME64(me)) + +/* slwi = rlwinm Rx, Ry, n, 0, 31-n */ +#define PPC_RAW_SLWI(d, a, i) PPC_RAW_RLWINM(d, a, i, 0, 31-(i)) +/* srwi = rlwinm Rx, Ry, 32-n, n, 31 */ +#define PPC_RAW_SRWI(d, a, i) PPC_RAW_RLWINM(d, a, 32-(i), i, 31) +/* sldi = rldicr Rx, Ry, n, 63-n */ +#define PPC_RAW_SLDI(d, a, i) PPC_RAW_RLDICR(d, a, i, 63-(i)) +/* sldi = rldicl Rx, Ry, 64-n, n */ +#define PPC_RAW_SRDI(d, a, i) PPC_RAW_RLDICL(d, a, 64-(i), i) + +#define PPC_RAW_NEG(d, a) (0x7c0000d0 | ___PPC_RT(d) | ___PPC_RA(a)) + +/* Deal with instructions that older assemblers aren't aware of */ +#define PPC_BCCTR_FLUSH stringify_in_c(.long PPC_INST_BCCTR_FLUSH) +#define PPC_CP_ABORT stringify_in_c(.long PPC_RAW_CP_ABORT) +#define PPC_COPY(a, b) stringify_in_c(.long PPC_RAW_COPY(a, b)) +#define PPC_DARN(t, l) stringify_in_c(.long PPC_RAW_DARN(t, l)) +#define PPC_DCBAL(a, b) stringify_in_c(.long PPC_RAW_DCBAL(a, b)) +#define PPC_DCBZL(a, b) stringify_in_c(.long PPC_RAW_DCBZL(a, b)) +#define PPC_DIVDE(t, a, b) stringify_in_c(.long PPC_RAW_DIVDE(t, a, b)) +#define PPC_DIVDEU(t, a, b) stringify_in_c(.long PPC_RAW_DIVDEU(t, a, b)) +#define PPC_DSSALL stringify_in_c(.long PPC_INST_DSSALL) +#define PPC_LQARX(t, a, b, eh) stringify_in_c(.long PPC_RAW_LQARX(t, a, b, eh)) +#define PPC_LDARX(t, a, b, eh) stringify_in_c(.long PPC_RAW_LDARX(t, a, b, eh)) +#define PPC_LWARX(t, a, b, eh) stringify_in_c(.long PPC_RAW_LWARX(t, a, b, eh)) +#define PPC_STQCX(t, a, b) stringify_in_c(.long PPC_RAW_STQCX(t, a, b)) +#define PPC_MADDHD(t, a, b, c) stringify_in_c(.long PPC_RAW_MADDHD(t, a, b, c)) +#define PPC_MADDHDU(t, a, b, c) stringify_in_c(.long PPC_RAW_MADDHDU(t, a, b, c)) +#define PPC_MADDLD(t, a, b, c) stringify_in_c(.long PPC_RAW_MADDLD(t, a, b, c)) +#define PPC_MSGSND(b) stringify_in_c(.long PPC_RAW_MSGSND(b)) +#define PPC_MSGSYNC stringify_in_c(.long PPC_RAW_MSGSYNC) +#define PPC_MSGCLR(b) stringify_in_c(.long PPC_RAW_MSGCLR(b)) +#define PPC_MSGSNDP(b) stringify_in_c(.long PPC_RAW_MSGSNDP(b)) +#define PPC_MSGCLRP(b) stringify_in_c(.long PPC_RAW_MSGCLRP(b)) +#define PPC_PASTE(a, b) stringify_in_c(.long PPC_RAW_PASTE(a, b)) +#define PPC_POPCNTB(a, s) stringify_in_c(.long PPC_RAW_POPCNTB(a, s)) +#define PPC_POPCNTD(a, s) stringify_in_c(.long PPC_RAW_POPCNTD(a, s)) +#define PPC_POPCNTW(a, s) stringify_in_c(.long PPC_RAW_POPCNTW(a, s)) +#define PPC_RFCI stringify_in_c(.long PPC_RAW_RFCI) +#define PPC_RFDI stringify_in_c(.long PPC_RAW_RFDI) +#define PPC_RFMCI stringify_in_c(.long PPC_RAW_RFMCI) +#define PPC_TLBILX(t, a, b) stringify_in_c(.long PPC_RAW_TLBILX(t, a, b)) +#define PPC_TLBILX_ALL(a, b) PPC_TLBILX(0, a, b) +#define PPC_TLBILX_PID(a, b) PPC_TLBILX(1, a, b) +#define PPC_TLBILX_VA(a, b) PPC_TLBILX(3, a, b) +#define PPC_WAIT(w) stringify_in_c(.long PPC_RAW_WAIT(w)) +#define PPC_TLBIE(lp, a) stringify_in_c(.long PPC_RAW_TLBIE(lp, a)) +#define PPC_TLBIE_5(rb, rs, ric, prs, r) \ + stringify_in_c(.long PPC_RAW_TLBIE_5(rb, rs, ric, prs, r)) +#define PPC_TLBIEL(rb,rs,ric,prs,r) \ + stringify_in_c(.long PPC_RAW_TLBIEL(rb, rs, ric, prs, r)) +#define PPC_TLBSRX_DOT(a, b) stringify_in_c(.long PPC_RAW_TLBSRX_DOT(a, b)) +#define PPC_TLBIVAX(a, b) stringify_in_c(.long PPC_RAW_TLBIVAX(a, b)) + +#define PPC_ERATWE(s, a, w) stringify_in_c(.long PPC_RAW_ERATWE(s, a, w)) +#define PPC_ERATRE(s, a, w) stringify_in_c(.long PPC_RAW_ERATRE(a, a, w)) +#define PPC_ERATILX(t, a, b) stringify_in_c(.long PPC_RAW_ERATILX(t, a, b)) +#define PPC_ERATIVAX(s, a, b) stringify_in_c(.long PPC_RAW_ERATIVAX(s, a, b)) +#define PPC_ERATSX(t, a, w) stringify_in_c(.long PPC_RAW_ERATSX(t, a, w)) +#define PPC_ERATSX_DOT(t, a, w) stringify_in_c(.long PPC_RAW_ERATSX_DOT(t, a, w)) +#define PPC_SLBFEE_DOT(t, b) stringify_in_c(.long PPC_RAW_SLBFEE_DOT(t, b)) +#define __PPC_SLBFEE_DOT(t, b) stringify_in_c(.long __PPC_RAW_SLBFEE_DOT(t, b)) +#define PPC_ICBT(c, a, b) stringify_in_c(.long PPC_RAW_ICBT(c, a, b)) +/* PASemi instructions */ +#define LBZCIX(t, a, b) stringify_in_c(.long PPC_RAW_LBZCIX(t, a, b)) +#define STBCIX(s, a, b) stringify_in_c(.long PPC_RAW_STBCIX(s, a, b)) +#define PPC_DCBFPS(a, b) stringify_in_c(.long PPC_RAW_DCBFPS(a, b)) +#define PPC_DCBSTPS(a, b) stringify_in_c(.long PPC_RAW_DCBSTPS(a, b)) +#define PPC_PHWSYNC stringify_in_c(.long PPC_RAW_PHWSYNC) +#define PPC_PLWSYNC stringify_in_c(.long PPC_RAW_PLWSYNC) +#define STXVD2X(s, a, b) stringify_in_c(.long PPC_RAW_STXVD2X(s, a, b)) +#define LXVD2X(s, a, b) stringify_in_c(.long PPC_RAW_LXVD2X(s, a, b)) +#define MFVRD(a, t) stringify_in_c(.long PPC_RAW_MFVRD(a, t)) +#define MTVRD(t, a) stringify_in_c(.long PPC_RAW_MTVRD(t, a)) +#define VPMSUMW(t, a, b) stringify_in_c(.long PPC_RAW_VPMSUMW(t, a, b)) +#define VPMSUMD(t, a, b) stringify_in_c(.long PPC_RAW_VPMSUMD(t, a, b)) +#define XXLOR(t, a, b) stringify_in_c(.long PPC_RAW_XXLOR(t, a, b)) +#define XXSWAPD(t, a) stringify_in_c(.long PPC_RAW_XXSWAPD(t, a)) +#define XVCPSGNDP(t, a, b) stringify_in_c(.long (PPC_RAW_XVCPSGNDP(t, a, b))) + +#define VPERMXOR(vrt, vra, vrb, vrc) \ + stringify_in_c(.long (PPC_RAW_VPERMXOR(vrt, vra, vrb, vrc))) + +#define PPC_NAP stringify_in_c(.long PPC_RAW_NAP) +#define PPC_SLEEP stringify_in_c(.long PPC_RAW_SLEEP) +#define PPC_WINKLE stringify_in_c(.long PPC_RAW_WINKLE) + +#define PPC_STOP stringify_in_c(.long PPC_RAW_STOP) + +/* BHRB instructions */ +#define PPC_CLRBHRB stringify_in_c(.long PPC_RAW_CLRBHRB) +#define PPC_MFBHRBE(r, n) stringify_in_c(.long PPC_RAW_MFBHRBE(r, n)) + +/* Transactional memory instructions */ +#define TRECHKPT stringify_in_c(.long PPC_RAW_TRECHKPT) +#define TRECLAIM(r) stringify_in_c(.long PPC_RAW_TRECLAIM(r)) +#define TABORT(r) stringify_in_c(.long PPC_RAW_TABORT(r)) + +/* book3e thread control instructions */ +#define MTTMR(tmr, r) stringify_in_c(.long PPC_RAW_MTTMR(tmr, r)) +#define MFTMR(tmr, r) stringify_in_c(.long PPC_RAW_MFTMR(tmr, r)) + +/* Coprocessor instructions */ +#define PPC_ICSWX(s, a, b) stringify_in_c(.long PPC_RAW_ICSWX(s, a, b)) +#define PPC_ICSWEPX(s, a, b) stringify_in_c(.long PPC_RAW_ICSWEPX(s, a, b)) + +#define PPC_SLBIA(IH) stringify_in_c(.long PPC_RAW_SLBIA(IH)) + +/* + * These may only be used on ISA v3.0 or later (aka. CPU_FTR_ARCH_300, radix + * implies CPU_FTR_ARCH_300). USER/GUEST invalidates may only be used by radix + * mode (on HPT these would also invalidate various SLBEs which may not be + * desired). + */ +#define PPC_ISA_3_0_INVALIDATE_ERAT PPC_SLBIA(7) +#define PPC_RADIX_INVALIDATE_ERAT_USER PPC_SLBIA(3) +#define PPC_RADIX_INVALIDATE_ERAT_GUEST PPC_SLBIA(6) + +#define VCMPEQUD_RC(vrt, vra, vrb) stringify_in_c(.long PPC_RAW_VCMPEQUD_RC(vrt, vra, vrb)) + +#define VCMPEQUB_RC(vrt, vra, vrb) stringify_in_c(.long PPC_RAW_VCMPEQUB_RC(vrt, vra, vrb)) + +#endif /* _ASM_POWERPC_PPC_OPCODE_H */ diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h new file mode 100644 index 000000000..7f4be5a05 --- /dev/null +++ b/arch/powerpc/include/asm/ppc-pci.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * c 2001 PPC 64 Team, IBM Corp + */ +#ifndef _ASM_POWERPC_PPC_PCI_H +#define _ASM_POWERPC_PPC_PCI_H +#ifdef __KERNEL__ + +#ifdef CONFIG_PCI + +#include <linux/pci.h> +#include <asm/pci-bridge.h> + +extern unsigned long isa_io_base; + +extern void pci_setup_phb_io(struct pci_controller *hose, int primary); +extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary); + + +extern struct list_head hose_list; + +extern struct pci_dev *isa_bridge_pcidev; /* may be NULL if no ISA bus */ + +/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */ +#define BUID_HI(buid) upper_32_bits(buid) +#define BUID_LO(buid) lower_32_bits(buid) + +/* PCI device_node operations */ +struct device_node; +struct pci_dn; + +void *pci_traverse_device_nodes(struct device_node *start, + void *(*fn)(struct device_node *, void *), + void *data); +void *traverse_pci_dn(struct pci_dn *root, + void *(*fn)(struct pci_dn *, void *), + void *data); +extern void pci_devs_phb_init_dynamic(struct pci_controller *phb); + +/* From rtas_pci.h */ +extern void init_pci_config_tokens (void); +extern unsigned long get_phb_buid (struct device_node *); +extern int rtas_setup_phb(struct pci_controller *phb); + +#ifdef CONFIG_EEH + +void eeh_addr_cache_insert_dev(struct pci_dev *dev); +void eeh_addr_cache_rmv_dev(struct pci_dev *dev); +struct eeh_dev *eeh_addr_cache_get_dev(unsigned long addr); +void eeh_slot_error_detail(struct eeh_pe *pe, int severity); +int eeh_pci_enable(struct eeh_pe *pe, int function); +int eeh_pe_reset_full(struct eeh_pe *pe, bool include_passed); +void eeh_save_bars(struct eeh_dev *edev); +int rtas_write_config(struct pci_dn *, int where, int size, u32 val); +int rtas_read_config(struct pci_dn *, int where, int size, u32 *val); +void eeh_pe_state_mark(struct eeh_pe *pe, int state); +void eeh_pe_mark_isolated(struct eeh_pe *pe); +void eeh_pe_state_clear(struct eeh_pe *pe, int state, bool include_passed); +void eeh_pe_state_mark_with_cfg(struct eeh_pe *pe, int state); +void eeh_pe_dev_mode_mark(struct eeh_pe *pe, int mode); + +void eeh_sysfs_add_device(struct pci_dev *pdev); +void eeh_sysfs_remove_device(struct pci_dev *pdev); + +static inline const char *eeh_driver_name(struct pci_dev *pdev) +{ + return (pdev && pdev->driver) ? pdev->driver->name : "<null>"; +} + +#endif /* CONFIG_EEH */ + +#define PCI_BUSNO(bdfn) ((bdfn >> 8) & 0xff) + +#else /* CONFIG_PCI */ +static inline void init_pci_config_tokens(void) { } +#endif /* !CONFIG_PCI */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PPC_PCI_H */ diff --git a/arch/powerpc/include/asm/ppc4xx.h b/arch/powerpc/include/asm/ppc4xx.h new file mode 100644 index 000000000..b37119e48 --- /dev/null +++ b/arch/powerpc/include/asm/ppc4xx.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * PPC4xx Prototypes and definitions + * + * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> + */ + +#ifndef __ASM_POWERPC_PPC4xx_H__ +#define __ASM_POWERPC_PPC4xx_H__ + +extern void __noreturn ppc4xx_reset_system(char *cmd); + +#endif /* __ASM_POWERPC_PPC4xx_H__ */ diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h new file mode 100644 index 000000000..511786f0e --- /dev/null +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -0,0 +1,828 @@ +/* + * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan. + */ +#ifndef _ASM_POWERPC_PPC_ASM_H +#define _ASM_POWERPC_PPC_ASM_H + +#include <linux/stringify.h> +#include <asm/asm-compat.h> +#include <asm/processor.h> +#include <asm/ppc-opcode.h> +#include <asm/firmware.h> +#include <asm/feature-fixups.h> + +#ifdef __ASSEMBLY__ + +#define SZL (BITS_PER_LONG/8) + +/* + * Stuff for accurate CPU time accounting. + * These macros handle transitions between user and system state + * in exception entry and exit and accumulate time to the + * user_time and system_time fields in the paca. + */ + +#ifndef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE +#define ACCOUNT_CPU_USER_ENTRY(ptr, ra, rb) +#define ACCOUNT_CPU_USER_EXIT(ptr, ra, rb) +#define ACCOUNT_STOLEN_TIME +#else +#define ACCOUNT_CPU_USER_ENTRY(ptr, ra, rb) \ + MFTB(ra); /* get timebase */ \ + PPC_LL rb, ACCOUNT_STARTTIME_USER(ptr); \ + PPC_STL ra, ACCOUNT_STARTTIME(ptr); \ + subf rb,rb,ra; /* subtract start value */ \ + PPC_LL ra, ACCOUNT_USER_TIME(ptr); \ + add ra,ra,rb; /* add on to user time */ \ + PPC_STL ra, ACCOUNT_USER_TIME(ptr); \ + +#define ACCOUNT_CPU_USER_EXIT(ptr, ra, rb) \ + MFTB(ra); /* get timebase */ \ + PPC_LL rb, ACCOUNT_STARTTIME(ptr); \ + PPC_STL ra, ACCOUNT_STARTTIME_USER(ptr); \ + subf rb,rb,ra; /* subtract start value */ \ + PPC_LL ra, ACCOUNT_SYSTEM_TIME(ptr); \ + add ra,ra,rb; /* add on to system time */ \ + PPC_STL ra, ACCOUNT_SYSTEM_TIME(ptr) + +#ifdef CONFIG_PPC_SPLPAR +#define ACCOUNT_STOLEN_TIME \ +BEGIN_FW_FTR_SECTION; \ + beq 33f; \ + /* from user - see if there are any DTL entries to process */ \ + ld r10,PACALPPACAPTR(r13); /* get ptr to VPA */ \ + ld r11,PACA_DTL_RIDX(r13); /* get log read index */ \ + addi r10,r10,LPPACA_DTLIDX; \ + LDX_BE r10,0,r10; /* get log write index */ \ + cmpd cr1,r11,r10; \ + beq+ cr1,33f; \ + bl accumulate_stolen_time; \ + ld r12,_MSR(r1); \ + andi. r10,r12,MSR_PR; /* Restore cr0 (coming from user) */ \ +33: \ +END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR) + +#else /* CONFIG_PPC_SPLPAR */ +#define ACCOUNT_STOLEN_TIME + +#endif /* CONFIG_PPC_SPLPAR */ + +#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */ + +/* + * Macros for storing registers into and loading registers from + * exception frames. + */ +#ifdef __powerpc64__ +#define SAVE_GPR(n, base) std n,GPR0+8*(n)(base) +#define REST_GPR(n, base) ld n,GPR0+8*(n)(base) +#define SAVE_NVGPRS(base) SAVE_8GPRS(14, base); SAVE_10GPRS(22, base) +#define REST_NVGPRS(base) REST_8GPRS(14, base); REST_10GPRS(22, base) +#else +#define SAVE_GPR(n, base) stw n,GPR0+4*(n)(base) +#define REST_GPR(n, base) lwz n,GPR0+4*(n)(base) +#define SAVE_NVGPRS(base) stmw 13, GPR0+4*13(base) +#define REST_NVGPRS(base) lmw 13, GPR0+4*13(base) +#endif + +#define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base) +#define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base) +#define SAVE_8GPRS(n, base) SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base) +#define SAVE_10GPRS(n, base) SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base) +#define REST_2GPRS(n, base) REST_GPR(n, base); REST_GPR(n+1, base) +#define REST_4GPRS(n, base) REST_2GPRS(n, base); REST_2GPRS(n+2, base) +#define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base) +#define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base) + +#define SAVE_FPR(n, base) stfd n,8*TS_FPRWIDTH*(n)(base) +#define SAVE_2FPRS(n, base) SAVE_FPR(n, base); SAVE_FPR(n+1, base) +#define SAVE_4FPRS(n, base) SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base) +#define SAVE_8FPRS(n, base) SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base) +#define SAVE_16FPRS(n, base) SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base) +#define SAVE_32FPRS(n, base) SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base) +#define REST_FPR(n, base) lfd n,8*TS_FPRWIDTH*(n)(base) +#define REST_2FPRS(n, base) REST_FPR(n, base); REST_FPR(n+1, base) +#define REST_4FPRS(n, base) REST_2FPRS(n, base); REST_2FPRS(n+2, base) +#define REST_8FPRS(n, base) REST_4FPRS(n, base); REST_4FPRS(n+4, base) +#define REST_16FPRS(n, base) REST_8FPRS(n, base); REST_8FPRS(n+8, base) +#define REST_32FPRS(n, base) REST_16FPRS(n, base); REST_16FPRS(n+16, base) + +#define SAVE_VR(n,b,base) li b,16*(n); stvx n,base,b +#define SAVE_2VRS(n,b,base) SAVE_VR(n,b,base); SAVE_VR(n+1,b,base) +#define SAVE_4VRS(n,b,base) SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base) +#define SAVE_8VRS(n,b,base) SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base) +#define SAVE_16VRS(n,b,base) SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base) +#define SAVE_32VRS(n,b,base) SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base) +#define REST_VR(n,b,base) li b,16*(n); lvx n,base,b +#define REST_2VRS(n,b,base) REST_VR(n,b,base); REST_VR(n+1,b,base) +#define REST_4VRS(n,b,base) REST_2VRS(n,b,base); REST_2VRS(n+2,b,base) +#define REST_8VRS(n,b,base) REST_4VRS(n,b,base); REST_4VRS(n+4,b,base) +#define REST_16VRS(n,b,base) REST_8VRS(n,b,base); REST_8VRS(n+8,b,base) +#define REST_32VRS(n,b,base) REST_16VRS(n,b,base); REST_16VRS(n+16,b,base) + +#ifdef __BIG_ENDIAN__ +#define STXVD2X_ROT(n,b,base) STXVD2X(n,b,base) +#define LXVD2X_ROT(n,b,base) LXVD2X(n,b,base) +#else +#define STXVD2X_ROT(n,b,base) XXSWAPD(n,n); \ + STXVD2X(n,b,base); \ + XXSWAPD(n,n) + +#define LXVD2X_ROT(n,b,base) LXVD2X(n,b,base); \ + XXSWAPD(n,n) +#endif +/* Save the lower 32 VSRs in the thread VSR region */ +#define SAVE_VSR(n,b,base) li b,16*(n); STXVD2X_ROT(n,R##base,R##b) +#define SAVE_2VSRS(n,b,base) SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base) +#define SAVE_4VSRS(n,b,base) SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base) +#define SAVE_8VSRS(n,b,base) SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base) +#define SAVE_16VSRS(n,b,base) SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base) +#define SAVE_32VSRS(n,b,base) SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base) +#define REST_VSR(n,b,base) li b,16*(n); LXVD2X_ROT(n,R##base,R##b) +#define REST_2VSRS(n,b,base) REST_VSR(n,b,base); REST_VSR(n+1,b,base) +#define REST_4VSRS(n,b,base) REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base) +#define REST_8VSRS(n,b,base) REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base) +#define REST_16VSRS(n,b,base) REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base) +#define REST_32VSRS(n,b,base) REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base) + +/* + * b = base register for addressing, o = base offset from register of 1st EVR + * n = first EVR, s = scratch + */ +#define SAVE_EVR(n,s,b,o) evmergehi s,s,n; stw s,o+4*(n)(b) +#define SAVE_2EVRS(n,s,b,o) SAVE_EVR(n,s,b,o); SAVE_EVR(n+1,s,b,o) +#define SAVE_4EVRS(n,s,b,o) SAVE_2EVRS(n,s,b,o); SAVE_2EVRS(n+2,s,b,o) +#define SAVE_8EVRS(n,s,b,o) SAVE_4EVRS(n,s,b,o); SAVE_4EVRS(n+4,s,b,o) +#define SAVE_16EVRS(n,s,b,o) SAVE_8EVRS(n,s,b,o); SAVE_8EVRS(n+8,s,b,o) +#define SAVE_32EVRS(n,s,b,o) SAVE_16EVRS(n,s,b,o); SAVE_16EVRS(n+16,s,b,o) +#define REST_EVR(n,s,b,o) lwz s,o+4*(n)(b); evmergelo n,s,n +#define REST_2EVRS(n,s,b,o) REST_EVR(n,s,b,o); REST_EVR(n+1,s,b,o) +#define REST_4EVRS(n,s,b,o) REST_2EVRS(n,s,b,o); REST_2EVRS(n+2,s,b,o) +#define REST_8EVRS(n,s,b,o) REST_4EVRS(n,s,b,o); REST_4EVRS(n+4,s,b,o) +#define REST_16EVRS(n,s,b,o) REST_8EVRS(n,s,b,o); REST_8EVRS(n+8,s,b,o) +#define REST_32EVRS(n,s,b,o) REST_16EVRS(n,s,b,o); REST_16EVRS(n+16,s,b,o) + +/* Macros to adjust thread priority for hardware multithreading */ +#define HMT_VERY_LOW or 31,31,31 # very low priority +#define HMT_LOW or 1,1,1 +#define HMT_MEDIUM_LOW or 6,6,6 # medium low priority +#define HMT_MEDIUM or 2,2,2 +#define HMT_MEDIUM_HIGH or 5,5,5 # medium high priority +#define HMT_HIGH or 3,3,3 +#define HMT_EXTRA_HIGH or 7,7,7 # power7 only + +#ifdef CONFIG_PPC64 +#define ULONG_SIZE 8 +#else +#define ULONG_SIZE 4 +#endif +#define __VCPU_GPR(n) (VCPU_GPRS + (n * ULONG_SIZE)) +#define VCPU_GPR(n) __VCPU_GPR(__REG_##n) + +#ifdef __KERNEL__ +#ifdef CONFIG_PPC64 + +#define STACKFRAMESIZE 256 +#define __STK_REG(i) (112 + ((i)-14)*8) +#define STK_REG(i) __STK_REG(__REG_##i) + +#ifdef PPC64_ELF_ABI_v2 +#define STK_GOT 24 +#define __STK_PARAM(i) (32 + ((i)-3)*8) +#else +#define STK_GOT 40 +#define __STK_PARAM(i) (48 + ((i)-3)*8) +#endif +#define STK_PARAM(i) __STK_PARAM(__REG_##i) + +#ifdef PPC64_ELF_ABI_v2 + +#define _GLOBAL(name) \ + .align 2 ; \ + .type name,@function; \ + .globl name; \ +name: + +#define _GLOBAL_TOC(name) \ + .align 2 ; \ + .type name,@function; \ + .globl name; \ +name: \ +0: addis r2,r12,(.TOC.-0b)@ha; \ + addi r2,r2,(.TOC.-0b)@l; \ + .localentry name,.-name + +#define DOTSYM(a) a + +#else + +#define XGLUE(a,b) a##b +#define GLUE(a,b) XGLUE(a,b) + +#define _GLOBAL(name) \ + .align 2 ; \ + .globl name; \ + .globl GLUE(.,name); \ + .pushsection ".opd","aw"; \ +name: \ + .quad GLUE(.,name); \ + .quad .TOC.@tocbase; \ + .quad 0; \ + .popsection; \ + .type GLUE(.,name),@function; \ +GLUE(.,name): + +#define _GLOBAL_TOC(name) _GLOBAL(name) + +#define DOTSYM(a) GLUE(.,a) + +#endif + +#else /* 32-bit */ + +#define _ENTRY(n) \ + .globl n; \ +n: + +#define _GLOBAL(n) \ + .stabs __stringify(n:F-1),N_FUN,0,0,n;\ + .globl n; \ +n: + +#define _GLOBAL_TOC(name) _GLOBAL(name) + +#endif + +/* + * __kprobes (the C annotation) puts the symbol into the .kprobes.text + * section, which gets emitted at the end of regular text. + * + * _ASM_NOKPROBE_SYMBOL and NOKPROBE_SYMBOL just adds the symbol to + * a blacklist. The former is for core kprobe functions/data, the + * latter is for those that incdentially must be excluded from probing + * and allows them to be linked at more optimal location within text. + */ +#ifdef CONFIG_KPROBES +#define _ASM_NOKPROBE_SYMBOL(entry) \ + .pushsection "_kprobe_blacklist","aw"; \ + PPC_LONG (entry) ; \ + .popsection +#else +#define _ASM_NOKPROBE_SYMBOL(entry) +#endif + +#define FUNC_START(name) _GLOBAL(name) +#define FUNC_END(name) + +/* + * LOAD_REG_IMMEDIATE(rn, expr) + * Loads the value of the constant expression 'expr' into register 'rn' + * using immediate instructions only. Use this when it's important not + * to reference other data (i.e. on ppc64 when the TOC pointer is not + * valid) and when 'expr' is a constant or absolute address. + * + * LOAD_REG_ADDR(rn, name) + * Loads the address of label 'name' into register 'rn'. Use this when + * you don't particularly need immediate instructions only, but you need + * the whole address in one register (e.g. it's a structure address and + * you want to access various offsets within it). On ppc32 this is + * identical to LOAD_REG_IMMEDIATE. + * + * LOAD_REG_ADDR_PIC(rn, name) + * Loads the address of label 'name' into register 'run'. Use this when + * the kernel doesn't run at the linked or relocated address. Please + * note that this macro will clobber the lr register. + * + * LOAD_REG_ADDRBASE(rn, name) + * ADDROFF(name) + * LOAD_REG_ADDRBASE loads part of the address of label 'name' into + * register 'rn'. ADDROFF(name) returns the remainder of the address as + * a constant expression. ADDROFF(name) is a signed expression < 16 bits + * in size, so is suitable for use directly as an offset in load and store + * instructions. Use this when loading/storing a single word or less as: + * LOAD_REG_ADDRBASE(rX, name) + * ld rY,ADDROFF(name)(rX) + */ + +/* Be careful, this will clobber the lr register. */ +#define LOAD_REG_ADDR_PIC(reg, name) \ + bl 0f; \ +0: mflr reg; \ + addis reg,reg,(name - 0b)@ha; \ + addi reg,reg,(name - 0b)@l; + +#if defined(__powerpc64__) && defined(HAVE_AS_ATHIGH) +#define __AS_ATHIGH high +#else +#define __AS_ATHIGH h +#endif + +.macro __LOAD_REG_IMMEDIATE_32 r, x + .if (\x) >= 0x8000 || (\x) < -0x8000 + lis \r, (\x)@__AS_ATHIGH + .if (\x) & 0xffff != 0 + ori \r, \r, (\x)@l + .endif + .else + li \r, (\x)@l + .endif +.endm + +.macro __LOAD_REG_IMMEDIATE r, x + .if (\x) >= 0x80000000 || (\x) < -0x80000000 + __LOAD_REG_IMMEDIATE_32 \r, (\x) >> 32 + sldi \r, \r, 32 + .if (\x) & 0xffff0000 != 0 + oris \r, \r, (\x)@__AS_ATHIGH + .endif + .if (\x) & 0xffff != 0 + ori \r, \r, (\x)@l + .endif + .else + __LOAD_REG_IMMEDIATE_32 \r, \x + .endif +.endm + +#ifdef __powerpc64__ + +#define LOAD_REG_IMMEDIATE(reg, expr) __LOAD_REG_IMMEDIATE reg, expr + +#define LOAD_REG_IMMEDIATE_SYM(reg, tmp, expr) \ + lis tmp, (expr)@highest; \ + lis reg, (expr)@__AS_ATHIGH; \ + ori tmp, tmp, (expr)@higher; \ + ori reg, reg, (expr)@l; \ + rldimi reg, tmp, 32, 0 + +#define LOAD_REG_ADDR(reg,name) \ + ld reg,name@got(r2) + +#define LOAD_REG_ADDRBASE(reg,name) LOAD_REG_ADDR(reg,name) +#define ADDROFF(name) 0 + +/* offsets for stack frame layout */ +#define LRSAVE 16 + +#else /* 32-bit */ + +#define LOAD_REG_IMMEDIATE(reg, expr) __LOAD_REG_IMMEDIATE_32 reg, expr + +#define LOAD_REG_IMMEDIATE_SYM(reg,expr) \ + lis reg,(expr)@ha; \ + addi reg,reg,(expr)@l; + +#define LOAD_REG_ADDR(reg,name) LOAD_REG_IMMEDIATE_SYM(reg, name) + +#define LOAD_REG_ADDRBASE(reg, name) lis reg,name@ha +#define ADDROFF(name) name@l + +/* offsets for stack frame layout */ +#define LRSAVE 4 + +#endif + +/* various errata or part fixups */ +#if defined(CONFIG_PPC_CELL) || defined(CONFIG_PPC_FSL_BOOK3E) +#define MFTB(dest) \ +90: mfspr dest, SPRN_TBRL; \ +BEGIN_FTR_SECTION_NESTED(96); \ + cmpwi dest,0; \ + beq- 90b; \ +END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96) +#else +#define MFTB(dest) MFTBL(dest) +#endif + +#ifdef CONFIG_PPC_8xx +#define MFTBL(dest) mftb dest +#define MFTBU(dest) mftbu dest +#else +#define MFTBL(dest) mfspr dest, SPRN_TBRL +#define MFTBU(dest) mfspr dest, SPRN_TBRU +#endif + +#ifndef CONFIG_SMP +#define TLBSYNC +#else +#define TLBSYNC tlbsync; sync +#endif + +#ifdef CONFIG_PPC64 +#define MTOCRF(FXM, RS) \ + BEGIN_FTR_SECTION_NESTED(848); \ + mtcrf (FXM), RS; \ + FTR_SECTION_ELSE_NESTED(848); \ + mtocrf (FXM), RS; \ + ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_NOEXECUTE, 848) +#endif + +/* + * This instruction is not implemented on the PPC 603 or 601; however, on + * the 403GCX and 405GP tlbia IS defined and tlbie is not. + * All of these instructions exist in the 8xx, they have magical powers, + * and they must be used. + */ + +#if !defined(CONFIG_4xx) && !defined(CONFIG_PPC_8xx) +#define tlbia \ + li r4,1024; \ + mtctr r4; \ + lis r4,KERNELBASE@h; \ + .machine push; \ + .machine "power4"; \ +0: tlbie r4; \ + .machine pop; \ + addi r4,r4,0x1000; \ + bdnz 0b +#endif + + +#ifdef CONFIG_IBM440EP_ERR42 +#define PPC440EP_ERR42 isync +#else +#define PPC440EP_ERR42 +#endif + +/* The following stops all load and store data streams associated with stream + * ID (ie. streams created explicitly). The embedded and server mnemonics for + * dcbt are different so this must only be used for server. + */ +#define DCBT_BOOK3S_STOP_ALL_STREAM_IDS(scratch) \ + lis scratch,0x60000000@h; \ + dcbt 0,scratch,0b01010 + +/* + * toreal/fromreal/tophys/tovirt macros. 32-bit BookE makes them + * keep the address intact to be compatible with code shared with + * 32-bit classic. + * + * On the other hand, I find it useful to have them behave as expected + * by their name (ie always do the addition) on 64-bit BookE + */ +#if defined(CONFIG_BOOKE) && !defined(CONFIG_PPC64) +#define toreal(rd) +#define fromreal(rd) + +/* + * We use addis to ensure compatibility with the "classic" ppc versions of + * these macros, which use rs = 0 to get the tophys offset in rd, rather than + * converting the address in r0, and so this version has to do that too + * (i.e. set register rd to 0 when rs == 0). + */ +#define tophys(rd,rs) \ + addis rd,rs,0 + +#define tovirt(rd,rs) \ + addis rd,rs,0 + +#elif defined(CONFIG_PPC64) +#define toreal(rd) /* we can access c000... in real mode */ +#define fromreal(rd) + +#define tophys(rd,rs) \ + clrldi rd,rs,2 + +#define tovirt(rd,rs) \ + rotldi rd,rs,16; \ + ori rd,rd,((KERNELBASE>>48)&0xFFFF);\ + rotldi rd,rd,48 +#else +#define toreal(rd) tophys(rd,rd) +#define fromreal(rd) tovirt(rd,rd) + +#define tophys(rd, rs) addis rd, rs, -PAGE_OFFSET@h +#define tovirt(rd, rs) addis rd, rs, PAGE_OFFSET@h +#endif + +#ifdef CONFIG_PPC_BOOK3S_64 +#define RFI rfid +#define MTMSRD(r) mtmsrd r +#define MTMSR_EERI(reg) mtmsrd reg,1 +#else +#ifndef CONFIG_40x +#define RFI rfi +#else +#define RFI rfi; b . /* Prevent prefetch past rfi */ +#endif +#define MTMSRD(r) mtmsr r +#define MTMSR_EERI(reg) mtmsr reg +#endif + +#endif /* __KERNEL__ */ + +/* The boring bits... */ + +/* Condition Register Bit Fields */ + +#define cr0 0 +#define cr1 1 +#define cr2 2 +#define cr3 3 +#define cr4 4 +#define cr5 5 +#define cr6 6 +#define cr7 7 + + +/* + * General Purpose Registers (GPRs) + * + * The lower case r0-r31 should be used in preference to the upper + * case R0-R31 as they provide more error checking in the assembler. + * Use R0-31 only when really nessesary. + */ + +#define r0 %r0 +#define r1 %r1 +#define r2 %r2 +#define r3 %r3 +#define r4 %r4 +#define r5 %r5 +#define r6 %r6 +#define r7 %r7 +#define r8 %r8 +#define r9 %r9 +#define r10 %r10 +#define r11 %r11 +#define r12 %r12 +#define r13 %r13 +#define r14 %r14 +#define r15 %r15 +#define r16 %r16 +#define r17 %r17 +#define r18 %r18 +#define r19 %r19 +#define r20 %r20 +#define r21 %r21 +#define r22 %r22 +#define r23 %r23 +#define r24 %r24 +#define r25 %r25 +#define r26 %r26 +#define r27 %r27 +#define r28 %r28 +#define r29 %r29 +#define r30 %r30 +#define r31 %r31 + + +/* Floating Point Registers (FPRs) */ + +#define fr0 0 +#define fr1 1 +#define fr2 2 +#define fr3 3 +#define fr4 4 +#define fr5 5 +#define fr6 6 +#define fr7 7 +#define fr8 8 +#define fr9 9 +#define fr10 10 +#define fr11 11 +#define fr12 12 +#define fr13 13 +#define fr14 14 +#define fr15 15 +#define fr16 16 +#define fr17 17 +#define fr18 18 +#define fr19 19 +#define fr20 20 +#define fr21 21 +#define fr22 22 +#define fr23 23 +#define fr24 24 +#define fr25 25 +#define fr26 26 +#define fr27 27 +#define fr28 28 +#define fr29 29 +#define fr30 30 +#define fr31 31 + +/* AltiVec Registers (VPRs) */ + +#define v0 0 +#define v1 1 +#define v2 2 +#define v3 3 +#define v4 4 +#define v5 5 +#define v6 6 +#define v7 7 +#define v8 8 +#define v9 9 +#define v10 10 +#define v11 11 +#define v12 12 +#define v13 13 +#define v14 14 +#define v15 15 +#define v16 16 +#define v17 17 +#define v18 18 +#define v19 19 +#define v20 20 +#define v21 21 +#define v22 22 +#define v23 23 +#define v24 24 +#define v25 25 +#define v26 26 +#define v27 27 +#define v28 28 +#define v29 29 +#define v30 30 +#define v31 31 + +/* VSX Registers (VSRs) */ + +#define vs0 0 +#define vs1 1 +#define vs2 2 +#define vs3 3 +#define vs4 4 +#define vs5 5 +#define vs6 6 +#define vs7 7 +#define vs8 8 +#define vs9 9 +#define vs10 10 +#define vs11 11 +#define vs12 12 +#define vs13 13 +#define vs14 14 +#define vs15 15 +#define vs16 16 +#define vs17 17 +#define vs18 18 +#define vs19 19 +#define vs20 20 +#define vs21 21 +#define vs22 22 +#define vs23 23 +#define vs24 24 +#define vs25 25 +#define vs26 26 +#define vs27 27 +#define vs28 28 +#define vs29 29 +#define vs30 30 +#define vs31 31 +#define vs32 32 +#define vs33 33 +#define vs34 34 +#define vs35 35 +#define vs36 36 +#define vs37 37 +#define vs38 38 +#define vs39 39 +#define vs40 40 +#define vs41 41 +#define vs42 42 +#define vs43 43 +#define vs44 44 +#define vs45 45 +#define vs46 46 +#define vs47 47 +#define vs48 48 +#define vs49 49 +#define vs50 50 +#define vs51 51 +#define vs52 52 +#define vs53 53 +#define vs54 54 +#define vs55 55 +#define vs56 56 +#define vs57 57 +#define vs58 58 +#define vs59 59 +#define vs60 60 +#define vs61 61 +#define vs62 62 +#define vs63 63 + +/* SPE Registers (EVPRs) */ + +#define evr0 0 +#define evr1 1 +#define evr2 2 +#define evr3 3 +#define evr4 4 +#define evr5 5 +#define evr6 6 +#define evr7 7 +#define evr8 8 +#define evr9 9 +#define evr10 10 +#define evr11 11 +#define evr12 12 +#define evr13 13 +#define evr14 14 +#define evr15 15 +#define evr16 16 +#define evr17 17 +#define evr18 18 +#define evr19 19 +#define evr20 20 +#define evr21 21 +#define evr22 22 +#define evr23 23 +#define evr24 24 +#define evr25 25 +#define evr26 26 +#define evr27 27 +#define evr28 28 +#define evr29 29 +#define evr30 30 +#define evr31 31 + +/* some stab codes */ +#define N_FUN 36 +#define N_RSYM 64 +#define N_SLINE 68 +#define N_SO 100 + +#define RFSCV .long 0x4c0000a4 + +/* + * Create an endian fixup trampoline + * + * This starts with a "tdi 0,0,0x48" instruction which is + * essentially a "trap never", and thus akin to a nop. + * + * The opcode for this instruction read with the wrong endian + * however results in a b . + 8 + * + * So essentially we use that trick to execute the following + * trampoline in "reverse endian" if we are running with the + * MSR_LE bit set the "wrong" way for whatever endianness the + * kernel is built for. + */ + +#ifdef CONFIG_PPC_BOOK3E +#define FIXUP_ENDIAN +#else +/* + * This version may be used in HV or non-HV context. + * MSR[EE] must be disabled. + */ +#define FIXUP_ENDIAN \ + tdi 0,0,0x48; /* Reverse endian of b . + 8 */ \ + b 191f; /* Skip trampoline if endian is good */ \ + .long 0xa600607d; /* mfmsr r11 */ \ + .long 0x01006b69; /* xori r11,r11,1 */ \ + .long 0x00004039; /* li r10,0 */ \ + .long 0x6401417d; /* mtmsrd r10,1 */ \ + .long 0x05009f42; /* bcl 20,31,$+4 */ \ + .long 0xa602487d; /* mflr r10 */ \ + .long 0x14004a39; /* addi r10,r10,20 */ \ + .long 0xa6035a7d; /* mtsrr0 r10 */ \ + .long 0xa6037b7d; /* mtsrr1 r11 */ \ + .long 0x2400004c; /* rfid */ \ +191: + +/* + * This version that may only be used with MSR[HV]=1 + * - Does not clear MSR[RI], so more robust. + * - Slightly smaller and faster. + */ +#define FIXUP_ENDIAN_HV \ + tdi 0,0,0x48; /* Reverse endian of b . + 8 */ \ + b 191f; /* Skip trampoline if endian is good */ \ + .long 0xa600607d; /* mfmsr r11 */ \ + .long 0x01006b69; /* xori r11,r11,1 */ \ + .long 0x05009f42; /* bcl 20,31,$+4 */ \ + .long 0xa602487d; /* mflr r10 */ \ + .long 0x14004a39; /* addi r10,r10,20 */ \ + .long 0xa64b5a7d; /* mthsrr0 r10 */ \ + .long 0xa64b7b7d; /* mthsrr1 r11 */ \ + .long 0x2402004c; /* hrfid */ \ +191: + +#endif /* !CONFIG_PPC_BOOK3E */ + +#endif /* __ASSEMBLY__ */ + +/* + * Helper macro for exception table entries + */ +#define EX_TABLE(_fault, _target) \ + stringify_in_c(.section __ex_table,"a";)\ + stringify_in_c(.balign 4;) \ + stringify_in_c(.long (_fault) - . ;) \ + stringify_in_c(.long (_target) - . ;) \ + stringify_in_c(.previous) + +#ifdef CONFIG_PPC_FSL_BOOK3E +#define BTB_FLUSH(reg) \ + lis reg,BUCSR_INIT@h; \ + ori reg,reg,BUCSR_INIT@l; \ + mtspr SPRN_BUCSR,reg; \ + isync; +#else +#define BTB_FLUSH(reg) +#endif /* CONFIG_PPC_FSL_BOOK3E */ + +#endif /* _ASM_POWERPC_PPC_ASM_H */ diff --git a/arch/powerpc/include/asm/probes.h b/arch/powerpc/include/asm/probes.h new file mode 100644 index 000000000..84dd1addd --- /dev/null +++ b/arch/powerpc/include/asm/probes.h @@ -0,0 +1,54 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_PROBES_H +#define _ASM_POWERPC_PROBES_H +#ifdef __KERNEL__ +/* + * Definitions common to probes files + * + * Copyright IBM Corporation, 2012 + */ +#include <linux/types.h> + +typedef u32 ppc_opcode_t; +#define BREAKPOINT_INSTRUCTION 0x7fe00008 /* trap */ + +/* Trap definitions per ISA */ +#define IS_TW(instr) (((instr) & 0xfc0007fe) == 0x7c000008) +#define IS_TD(instr) (((instr) & 0xfc0007fe) == 0x7c000088) +#define IS_TDI(instr) (((instr) & 0xfc000000) == 0x08000000) +#define IS_TWI(instr) (((instr) & 0xfc000000) == 0x0c000000) + +#ifdef CONFIG_PPC64 +#define is_trap(instr) (IS_TW(instr) || IS_TD(instr) || \ + IS_TWI(instr) || IS_TDI(instr)) +#else +#define is_trap(instr) (IS_TW(instr) || IS_TWI(instr)) +#endif /* CONFIG_PPC64 */ + +#ifdef CONFIG_PPC_ADV_DEBUG_REGS +#define MSR_SINGLESTEP (MSR_DE) +#else +#define MSR_SINGLESTEP (MSR_SE) +#endif + +/* Enable single stepping for the current task */ +static inline void enable_single_step(struct pt_regs *regs) +{ + regs->msr |= MSR_SINGLESTEP; +#ifdef CONFIG_PPC_ADV_DEBUG_REGS + /* + * We turn off Critical Input Exception(CE) to ensure that the single + * step will be for the instruction we have the probe on; if we don't, + * it is possible we'd get the single step reported for CE. + */ + regs->msr &= ~MSR_CE; + mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM); +#ifdef CONFIG_PPC_47x + isync(); +#endif +#endif +} + + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_PROBES_H */ diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h new file mode 100644 index 000000000..c61c859b5 --- /dev/null +++ b/arch/powerpc/include/asm/processor.h @@ -0,0 +1,447 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_PROCESSOR_H +#define _ASM_POWERPC_PROCESSOR_H + +/* + * Copyright (C) 2001 PPC 64 Team, IBM Corp + */ + +#include <asm/reg.h> + +#ifdef CONFIG_VSX +#define TS_FPRWIDTH 2 + +#ifdef __BIG_ENDIAN__ +#define TS_FPROFFSET 0 +#define TS_VSRLOWOFFSET 1 +#else +#define TS_FPROFFSET 1 +#define TS_VSRLOWOFFSET 0 +#endif + +#else +#define TS_FPRWIDTH 1 +#define TS_FPROFFSET 0 +#endif + +#ifdef CONFIG_PPC64 +/* Default SMT priority is set to 3. Use 11- 13bits to save priority. */ +#define PPR_PRIORITY 3 +#ifdef __ASSEMBLY__ +#define DEFAULT_PPR (PPR_PRIORITY << 50) +#else +#define DEFAULT_PPR ((u64)PPR_PRIORITY << 50) +#endif /* __ASSEMBLY__ */ +#endif /* CONFIG_PPC64 */ + +#ifndef __ASSEMBLY__ +#include <linux/types.h> +#include <linux/thread_info.h> +#include <asm/ptrace.h> +#include <asm/hw_breakpoint.h> + +/* We do _not_ want to define new machine types at all, those must die + * in favor of using the device-tree + * -- BenH. + */ + +/* PREP sub-platform types. Unused */ +#define _PREP_Motorola 0x01 /* motorola prep */ +#define _PREP_Firm 0x02 /* firmworks prep */ +#define _PREP_IBM 0x00 /* ibm prep */ +#define _PREP_Bull 0x03 /* bull prep */ + +/* CHRP sub-platform types. These are arbitrary */ +#define _CHRP_Motorola 0x04 /* motorola chrp, the cobra */ +#define _CHRP_IBM 0x05 /* IBM chrp, the longtrail and longtrail 2 */ +#define _CHRP_Pegasos 0x06 /* Genesi/bplan's Pegasos and Pegasos2 */ +#define _CHRP_briq 0x07 /* TotalImpact's briQ */ + +#if defined(__KERNEL__) && defined(CONFIG_PPC32) + +extern int _chrp_type; + +#endif /* defined(__KERNEL__) && defined(CONFIG_PPC32) */ + +/* Macros for adjusting thread priority (hardware multi-threading) */ +#define HMT_very_low() asm volatile("or 31,31,31 # very low priority") +#define HMT_low() asm volatile("or 1,1,1 # low priority") +#define HMT_medium_low() asm volatile("or 6,6,6 # medium low priority") +#define HMT_medium() asm volatile("or 2,2,2 # medium priority") +#define HMT_medium_high() asm volatile("or 5,5,5 # medium high priority") +#define HMT_high() asm volatile("or 3,3,3 # high priority") + +#ifdef __KERNEL__ + +#ifdef CONFIG_PPC64 +#include <asm/task_size_64.h> +#else +#include <asm/task_size_32.h> +#endif + +struct task_struct; +void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp); +void release_thread(struct task_struct *); + +#define TS_FPR(i) fp_state.fpr[i][TS_FPROFFSET] +#define TS_CKFPR(i) ckfp_state.fpr[i][TS_FPROFFSET] + +/* FP and VSX 0-31 register set */ +struct thread_fp_state { + u64 fpr[32][TS_FPRWIDTH] __attribute__((aligned(16))); + u64 fpscr; /* Floating point status */ +}; + +/* Complete AltiVec register set including VSCR */ +struct thread_vr_state { + vector128 vr[32] __attribute__((aligned(16))); + vector128 vscr __attribute__((aligned(16))); +}; + +struct debug_reg { +#ifdef CONFIG_PPC_ADV_DEBUG_REGS + /* + * The following help to manage the use of Debug Control Registers + * om the BookE platforms. + */ + uint32_t dbcr0; + uint32_t dbcr1; +#ifdef CONFIG_BOOKE + uint32_t dbcr2; +#endif + /* + * The stored value of the DBSR register will be the value at the + * last debug interrupt. This register can only be read from the + * user (will never be written to) and has value while helping to + * describe the reason for the last debug trap. Torez + */ + uint32_t dbsr; + /* + * The following will contain addresses used by debug applications + * to help trace and trap on particular address locations. + * The bits in the Debug Control Registers above help define which + * of the following registers will contain valid data and/or addresses. + */ + unsigned long iac1; + unsigned long iac2; +#if CONFIG_PPC_ADV_DEBUG_IACS > 2 + unsigned long iac3; + unsigned long iac4; +#endif + unsigned long dac1; + unsigned long dac2; +#if CONFIG_PPC_ADV_DEBUG_DVCS > 0 + unsigned long dvc1; + unsigned long dvc2; +#endif +#endif +}; + +struct thread_struct { + unsigned long ksp; /* Kernel stack pointer */ + +#ifdef CONFIG_PPC64 + unsigned long ksp_vsid; +#endif + struct pt_regs *regs; /* Pointer to saved register state */ +#ifdef CONFIG_BOOKE + /* BookE base exception scratch space; align on cacheline */ + unsigned long normsave[8] ____cacheline_aligned; +#endif +#ifdef CONFIG_PPC32 + void *pgdir; /* root of page-table tree */ + unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */ +#ifdef CONFIG_PPC_RTAS + unsigned long rtas_sp; /* stack pointer for when in RTAS */ +#endif +#endif +#if defined(CONFIG_PPC_BOOK3S_32) && defined(CONFIG_PPC_KUAP) + unsigned long kuap; /* opened segments for user access */ +#endif +#ifdef CONFIG_VMAP_STACK + unsigned long srr0; + unsigned long srr1; + unsigned long dar; + unsigned long dsisr; +#ifdef CONFIG_PPC_BOOK3S_32 + unsigned long r0, r3, r4, r5, r6, r8, r9, r11; + unsigned long lr, ctr; +#endif +#endif + /* Debug Registers */ + struct debug_reg debug; + struct thread_fp_state fp_state; + struct thread_fp_state *fp_save_area; + int fpexc_mode; /* floating-point exception mode */ + unsigned int align_ctl; /* alignment handling control */ +#ifdef CONFIG_HAVE_HW_BREAKPOINT + struct perf_event *ptrace_bps[HBP_NUM_MAX]; + /* + * Helps identify source of single-step exception and subsequent + * hw-breakpoint enablement + */ + struct perf_event *last_hit_ubp[HBP_NUM_MAX]; +#endif /* CONFIG_HAVE_HW_BREAKPOINT */ + struct arch_hw_breakpoint hw_brk[HBP_NUM_MAX]; /* hardware breakpoint info */ + unsigned long trap_nr; /* last trap # on this thread */ + u8 load_slb; /* Ages out SLB preload cache entries */ + u8 load_fp; +#ifdef CONFIG_ALTIVEC + u8 load_vec; + struct thread_vr_state vr_state; + struct thread_vr_state *vr_save_area; + unsigned long vrsave; + int used_vr; /* set if process has used altivec */ +#endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_VSX + /* VSR status */ + int used_vsr; /* set if process has used VSX */ +#endif /* CONFIG_VSX */ +#ifdef CONFIG_SPE + unsigned long evr[32]; /* upper 32-bits of SPE regs */ + u64 acc; /* Accumulator */ + unsigned long spefscr; /* SPE & eFP status */ + unsigned long spefscr_last; /* SPEFSCR value on last prctl + call or trap return */ + int used_spe; /* set if process has used spe */ +#endif /* CONFIG_SPE */ +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + u8 load_tm; + u64 tm_tfhar; /* Transaction fail handler addr */ + u64 tm_texasr; /* Transaction exception & summary */ + u64 tm_tfiar; /* Transaction fail instr address reg */ + struct pt_regs ckpt_regs; /* Checkpointed registers */ + + unsigned long tm_tar; + unsigned long tm_ppr; + unsigned long tm_dscr; + unsigned long tm_amr; + + /* + * Checkpointed FP and VSX 0-31 register set. + * + * When a transaction is active/signalled/scheduled etc., *regs is the + * most recent set of/speculated GPRs with ckpt_regs being the older + * checkpointed regs to which we roll back if transaction aborts. + * + * These are analogous to how ckpt_regs and pt_regs work + */ + struct thread_fp_state ckfp_state; /* Checkpointed FP state */ + struct thread_vr_state ckvr_state; /* Checkpointed VR state */ + unsigned long ckvrsave; /* Checkpointed VRSAVE */ +#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ +#ifdef CONFIG_PPC_MEM_KEYS + unsigned long amr; + unsigned long iamr; +#endif +#ifdef CONFIG_KVM_BOOK3S_32_HANDLER + void* kvm_shadow_vcpu; /* KVM internal data */ +#endif /* CONFIG_KVM_BOOK3S_32_HANDLER */ +#if defined(CONFIG_KVM) && defined(CONFIG_BOOKE) + struct kvm_vcpu *kvm_vcpu; +#endif +#ifdef CONFIG_PPC64 + unsigned long dscr; + unsigned long fscr; + /* + * This member element dscr_inherit indicates that the process + * has explicitly attempted and changed the DSCR register value + * for itself. Hence kernel wont use the default CPU DSCR value + * contained in the PACA structure anymore during process context + * switch. Once this variable is set, this behaviour will also be + * inherited to all the children of this process from that point + * onwards. + */ + int dscr_inherit; + unsigned long tidr; +#endif +#ifdef CONFIG_PPC_BOOK3S_64 + unsigned long tar; + unsigned long ebbrr; + unsigned long ebbhr; + unsigned long bescr; + unsigned long siar; + unsigned long sdar; + unsigned long sier; + unsigned long mmcr2; + unsigned mmcr0; + + unsigned used_ebb; + unsigned long mmcr3; + unsigned long sier2; + unsigned long sier3; + +#endif +}; + +#define ARCH_MIN_TASKALIGN 16 + +#define INIT_SP (sizeof(init_stack) + (unsigned long) &init_stack) +#define INIT_SP_LIMIT ((unsigned long)&init_stack) + +#ifdef CONFIG_SPE +#define SPEFSCR_INIT \ + .spefscr = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE, \ + .spefscr_last = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE, +#else +#define SPEFSCR_INIT +#endif + +#ifdef CONFIG_PPC32 +#define INIT_THREAD { \ + .ksp = INIT_SP, \ + .ksp_limit = INIT_SP_LIMIT, \ + .pgdir = swapper_pg_dir, \ + .fpexc_mode = MSR_FE0 | MSR_FE1, \ + SPEFSCR_INIT \ +} +#else +#define INIT_THREAD { \ + .ksp = INIT_SP, \ + .fpexc_mode = 0, \ +} +#endif + +#define task_pt_regs(tsk) ((tsk)->thread.regs) + +unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0) +#define KSTK_ESP(tsk) ((tsk)->thread.regs? (tsk)->thread.regs->gpr[1]: 0) + +/* Get/set floating-point exception mode */ +#define GET_FPEXC_CTL(tsk, adr) get_fpexc_mode((tsk), (adr)) +#define SET_FPEXC_CTL(tsk, val) set_fpexc_mode((tsk), (val)) + +extern int get_fpexc_mode(struct task_struct *tsk, unsigned long adr); +extern int set_fpexc_mode(struct task_struct *tsk, unsigned int val); + +#define GET_ENDIAN(tsk, adr) get_endian((tsk), (adr)) +#define SET_ENDIAN(tsk, val) set_endian((tsk), (val)) + +extern int get_endian(struct task_struct *tsk, unsigned long adr); +extern int set_endian(struct task_struct *tsk, unsigned int val); + +#define GET_UNALIGN_CTL(tsk, adr) get_unalign_ctl((tsk), (adr)) +#define SET_UNALIGN_CTL(tsk, val) set_unalign_ctl((tsk), (val)) + +extern int get_unalign_ctl(struct task_struct *tsk, unsigned long adr); +extern int set_unalign_ctl(struct task_struct *tsk, unsigned int val); + +extern void load_fp_state(struct thread_fp_state *fp); +extern void store_fp_state(struct thread_fp_state *fp); +extern void load_vr_state(struct thread_vr_state *vr); +extern void store_vr_state(struct thread_vr_state *vr); + +static inline unsigned int __unpack_fe01(unsigned long msr_bits) +{ + return ((msr_bits & MSR_FE0) >> 10) | ((msr_bits & MSR_FE1) >> 8); +} + +static inline unsigned long __pack_fe01(unsigned int fpmode) +{ + return ((fpmode << 10) & MSR_FE0) | ((fpmode << 8) & MSR_FE1); +} + +#ifdef CONFIG_PPC64 +#define cpu_relax() do { HMT_low(); HMT_medium(); barrier(); } while (0) + +#define spin_begin() HMT_low() + +#define spin_cpu_relax() barrier() + +#define spin_end() HMT_medium() + +#define spin_until_cond(cond) \ +do { \ + if (unlikely(!(cond))) { \ + spin_begin(); \ + do { \ + spin_cpu_relax(); \ + } while (!(cond)); \ + spin_end(); \ + } \ +} while (0) + +#else +#define cpu_relax() barrier() +#endif + +/* Check that a certain kernel stack pointer is valid in task_struct p */ +int validate_sp(unsigned long sp, struct task_struct *p, + unsigned long nbytes); + +/* + * Prefetch macros. + */ +#define ARCH_HAS_PREFETCH +#define ARCH_HAS_PREFETCHW +#define ARCH_HAS_SPINLOCK_PREFETCH + +static inline void prefetch(const void *x) +{ + if (unlikely(!x)) + return; + + __asm__ __volatile__ ("dcbt 0,%0" : : "r" (x)); +} + +static inline void prefetchw(const void *x) +{ + if (unlikely(!x)) + return; + + __asm__ __volatile__ ("dcbtst 0,%0" : : "r" (x)); +} + +#define spin_lock_prefetch(x) prefetchw(x) + +#define HAVE_ARCH_PICK_MMAP_LAYOUT + +#ifdef CONFIG_PPC64 +static inline unsigned long get_clean_sp(unsigned long sp, int is_32) +{ + if (is_32) + return sp & 0x0ffffffffUL; + return sp; +} +#else +static inline unsigned long get_clean_sp(unsigned long sp, int is_32) +{ + return sp; +} +#endif + +/* asm stubs */ +extern unsigned long isa300_idle_stop_noloss(unsigned long psscr_val); +extern unsigned long isa300_idle_stop_mayloss(unsigned long psscr_val); +extern unsigned long isa206_idle_insn_mayloss(unsigned long type); +#ifdef CONFIG_PPC_970_NAP +extern void power4_idle_nap(void); +#endif + +extern unsigned long cpuidle_disable; +enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF}; + +extern int powersave_nap; /* set if nap mode can be used in idle loop */ + +extern void power7_idle_type(unsigned long type); +extern void arch300_idle_type(unsigned long stop_psscr_val, + unsigned long stop_psscr_mask); + +extern int fix_alignment(struct pt_regs *); + +#ifdef CONFIG_PPC64 +/* + * We handle most unaligned accesses in hardware. On the other hand + * unaligned DMA can be very expensive on some ppc64 IO chips (it does + * powers of 2 writes until it reaches sufficient alignment). + * + * Based on this we disable the IP header alignment in network drivers. + */ +#define NET_IP_ALIGN 0 +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_POWERPC_PROCESSOR_H */ diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h new file mode 100644 index 000000000..5c80152e8 --- /dev/null +++ b/arch/powerpc/include/asm/prom.h @@ -0,0 +1,182 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _POWERPC_PROM_H +#define _POWERPC_PROM_H +#ifdef __KERNEL__ + +/* + * Definitions for talking to the Open Firmware PROM on + * Power Macintosh computers. + * + * Copyright (C) 1996-2005 Paul Mackerras. + * + * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp. + */ +#include <linux/types.h> +#include <asm/irq.h> +#include <linux/atomic.h> + +/* These includes should be removed once implicit includes are cleaned up. */ +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> + +#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */ +#define OF_DT_END_NODE 0x2 /* End node */ +#define OF_DT_PROP 0x3 /* Property: name off, size, + * content */ +#define OF_DT_NOP 0x4 /* nop */ +#define OF_DT_END 0x9 + +#define OF_DT_VERSION 0x10 + +/* + * This is what gets passed to the kernel by prom_init or kexec + * + * The dt struct contains the device tree structure, full pathes and + * property contents. The dt strings contain a separate block with just + * the strings for the property names, and is fully page aligned and + * self contained in a page, so that it can be kept around by the kernel, + * each property name appears only once in this page (cheap compression) + * + * the mem_rsvmap contains a map of reserved ranges of physical memory, + * passing it here instead of in the device-tree itself greatly simplifies + * the job of everybody. It's just a list of u64 pairs (base/size) that + * ends when size is 0 + */ +struct boot_param_header { + __be32 magic; /* magic word OF_DT_HEADER */ + __be32 totalsize; /* total size of DT block */ + __be32 off_dt_struct; /* offset to structure */ + __be32 off_dt_strings; /* offset to strings */ + __be32 off_mem_rsvmap; /* offset to memory reserve map */ + __be32 version; /* format version */ + __be32 last_comp_version; /* last compatible version */ + /* version 2 fields below */ + __be32 boot_cpuid_phys; /* Physical CPU id we're booting on */ + /* version 3 fields below */ + __be32 dt_strings_size; /* size of the DT strings block */ + /* version 17 fields below */ + __be32 dt_struct_size; /* size of the DT structure block */ +}; + +/* + * OF address retreival & translation + */ + +/* Parse the ibm,dma-window property of an OF node into the busno, phys and + * size parameters. + */ +void of_parse_dma_window(struct device_node *dn, const __be32 *dma_window, + unsigned long *busno, unsigned long *phys, + unsigned long *size); + +extern void of_instantiate_rtc(void); + +extern int of_get_ibm_chip_id(struct device_node *np); + +struct of_drc_info { + char *drc_type; + char *drc_name_prefix; + u32 drc_index_start; + u32 drc_name_suffix_start; + u32 num_sequential_elems; + u32 sequential_inc; + u32 drc_power_domain; + u32 last_drc_index; +}; + +extern int of_read_drc_info_cell(struct property **prop, + const __be32 **curval, struct of_drc_info *data); + + +/* + * There are two methods for telling firmware what our capabilities are. + * Newer machines have an "ibm,client-architecture-support" method on the + * root node. For older machines, we have to call the "process-elf-header" + * method in the /packages/elf-loader node, passing it a fake 32-bit + * ELF header containing a couple of PT_NOTE sections that contain + * structures that contain various information. + */ + +/* New method - extensible architecture description vector. */ + +/* Option vector bits - generic bits in byte 1 */ +#define OV_IGNORE 0x80 /* ignore this vector */ +#define OV_CESSATION_POLICY 0x40 /* halt if unsupported option present*/ + +/* Option vector 1: processor architectures supported */ +#define OV1_PPC_2_00 0x80 /* set if we support PowerPC 2.00 */ +#define OV1_PPC_2_01 0x40 /* set if we support PowerPC 2.01 */ +#define OV1_PPC_2_02 0x20 /* set if we support PowerPC 2.02 */ +#define OV1_PPC_2_03 0x10 /* set if we support PowerPC 2.03 */ +#define OV1_PPC_2_04 0x08 /* set if we support PowerPC 2.04 */ +#define OV1_PPC_2_05 0x04 /* set if we support PowerPC 2.05 */ +#define OV1_PPC_2_06 0x02 /* set if we support PowerPC 2.06 */ +#define OV1_PPC_2_07 0x01 /* set if we support PowerPC 2.07 */ + +#define OV1_PPC_3_00 0x80 /* set if we support PowerPC 3.00 */ +#define OV1_PPC_3_1 0x40 /* set if we support PowerPC 3.1 */ + +/* Option vector 2: Open Firmware options supported */ +#define OV2_REAL_MODE 0x20 /* set if we want OF in real mode */ + +/* Option vector 3: processor options supported */ +#define OV3_FP 0x80 /* floating point */ +#define OV3_VMX 0x40 /* VMX/Altivec */ +#define OV3_DFP 0x20 /* decimal FP */ + +/* Option vector 4: IBM PAPR implementation */ +#define OV4_MIN_ENT_CAP 0x01 /* minimum VP entitled capacity */ + +/* Option vector 5: PAPR/OF options supported + * These bits are also used in firmware_has_feature() to validate + * the capabilities reported for vector 5 in the device tree so we + * encode the vector index in the define and use the OV5_FEAT() + * and OV5_INDX() macros to extract the desired information. + */ +#define OV5_FEAT(x) ((x) & 0xff) +#define OV5_INDX(x) ((x) >> 8) +#define OV5_LPAR 0x0280 /* logical partitioning supported */ +#define OV5_SPLPAR 0x0240 /* shared-processor LPAR supported */ +/* ibm,dynamic-reconfiguration-memory property supported */ +#define OV5_DRCONF_MEMORY 0x0220 +#define OV5_LARGE_PAGES 0x0210 /* large pages supported */ +#define OV5_DONATE_DEDICATE_CPU 0x0202 /* donate dedicated CPU support */ +#define OV5_MSI 0x0201 /* PCIe/MSI support */ +#define OV5_CMO 0x0480 /* Cooperative Memory Overcommitment */ +#define OV5_XCMO 0x0440 /* Page Coalescing */ +#define OV5_FORM1_AFFINITY 0x0580 /* FORM1 NUMA affinity */ +#define OV5_PRRN 0x0540 /* Platform Resource Reassignment */ +#define OV5_FORM2_AFFINITY 0x0520 /* Form2 NUMA affinity */ +#define OV5_HP_EVT 0x0604 /* Hot Plug Event support */ +#define OV5_RESIZE_HPT 0x0601 /* Hash Page Table resizing */ +#define OV5_PFO_HW_RNG 0x1180 /* PFO Random Number Generator */ +#define OV5_PFO_HW_842 0x1140 /* PFO Compression Accelerator */ +#define OV5_PFO_HW_ENCR 0x1120 /* PFO Encryption Accelerator */ +#define OV5_SUB_PROCESSORS 0x1501 /* 1,2,or 4 Sub-Processors supported */ +#define OV5_DRMEM_V2 0x1680 /* ibm,dynamic-reconfiguration-v2 */ +#define OV5_XIVE_SUPPORT 0x17C0 /* XIVE Exploitation Support Mask */ +#define OV5_XIVE_LEGACY 0x1700 /* XIVE legacy mode Only */ +#define OV5_XIVE_EXPLOIT 0x1740 /* XIVE exploitation mode Only */ +#define OV5_XIVE_EITHER 0x1780 /* XIVE legacy or exploitation mode */ +/* MMU Base Architecture */ +#define OV5_MMU_SUPPORT 0x18C0 /* MMU Mode Support Mask */ +#define OV5_MMU_HASH 0x1800 /* Hash MMU Only */ +#define OV5_MMU_RADIX 0x1840 /* Radix MMU Only */ +#define OV5_MMU_EITHER 0x1880 /* Hash or Radix Supported */ +#define OV5_MMU_DYNAMIC 0x18C0 /* Hash or Radix Can Switch Later */ +#define OV5_NMMU 0x1820 /* Nest MMU Available */ +/* Hash Table Extensions */ +#define OV5_HASH_SEG_TBL 0x1980 /* In Memory Segment Tables Available */ +#define OV5_HASH_GTSE 0x1940 /* Guest Translation Shoot Down Avail */ +/* Radix Table Extensions */ +#define OV5_RADIX_GTSE 0x1A40 /* Guest Translation Shoot Down Avail */ +#define OV5_DRC_INFO 0x1640 /* Redef Prop Structures: drc-info */ + +/* Option Vector 6: IBM PAPR hints */ +#define OV6_LINUX 0x02 /* Linux is our OS */ + +#endif /* __KERNEL__ */ +#endif /* _POWERPC_PROM_H */ diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h new file mode 100644 index 000000000..964063765 --- /dev/null +++ b/arch/powerpc/include/asm/ps3.h @@ -0,0 +1,521 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * PS3 platform declarations. + * + * Copyright (C) 2006 Sony Computer Entertainment Inc. + * Copyright 2006 Sony Corp. + */ + +#if !defined(_ASM_POWERPC_PS3_H) +#define _ASM_POWERPC_PS3_H + +#include <linux/types.h> +#include <linux/device.h> +#include <asm/cell-pmu.h> + +union ps3_firmware_version { + u64 raw; + struct { + u16 pad; + u16 major; + u16 minor; + u16 rev; + }; +}; + +void ps3_get_firmware_version(union ps3_firmware_version *v); +int ps3_compare_firmware_version(u16 major, u16 minor, u16 rev); + +/* 'Other OS' area */ + +enum ps3_param_av_multi_out { + PS3_PARAM_AV_MULTI_OUT_NTSC = 0, + PS3_PARAM_AV_MULTI_OUT_PAL_RGB = 1, + PS3_PARAM_AV_MULTI_OUT_PAL_YCBCR = 2, + PS3_PARAM_AV_MULTI_OUT_SECAM = 3, +}; + +enum ps3_param_av_multi_out ps3_os_area_get_av_multi_out(void); + +extern u64 ps3_os_area_get_rtc_diff(void); +extern void ps3_os_area_set_rtc_diff(u64 rtc_diff); + +struct ps3_os_area_flash_ops { + ssize_t (*read)(void *buf, size_t count, loff_t pos); + ssize_t (*write)(const void *buf, size_t count, loff_t pos); +}; + +extern void ps3_os_area_flash_register(const struct ps3_os_area_flash_ops *ops); + +/* dma routines */ + +enum ps3_dma_page_size { + PS3_DMA_4K = 12U, + PS3_DMA_64K = 16U, + PS3_DMA_1M = 20U, + PS3_DMA_16M = 24U, +}; + +enum ps3_dma_region_type { + PS3_DMA_OTHER = 0, + PS3_DMA_INTERNAL = 2, +}; + +struct ps3_dma_region_ops; + +/** + * struct ps3_dma_region - A per device dma state variables structure + * @did: The HV device id. + * @page_size: The ioc pagesize. + * @region_type: The HV region type. + * @bus_addr: The 'translated' bus address of the region. + * @len: The length in bytes of the region. + * @offset: The offset from the start of memory of the region. + * @dma_mask: Device dma_mask. + * @ioid: The IOID of the device who owns this region + * @chunk_list: Opaque variable used by the ioc page manager. + * @region_ops: struct ps3_dma_region_ops - dma region operations + */ + +struct ps3_dma_region { + struct ps3_system_bus_device *dev; + /* device variables */ + const struct ps3_dma_region_ops *region_ops; + unsigned char ioid; + enum ps3_dma_page_size page_size; + enum ps3_dma_region_type region_type; + unsigned long len; + unsigned long offset; + u64 dma_mask; + + /* driver variables (set by ps3_dma_region_create) */ + unsigned long bus_addr; + struct { + spinlock_t lock; + struct list_head head; + } chunk_list; +}; + +struct ps3_dma_region_ops { + int (*create)(struct ps3_dma_region *); + int (*free)(struct ps3_dma_region *); + int (*map)(struct ps3_dma_region *, + unsigned long virt_addr, + unsigned long len, + dma_addr_t *bus_addr, + u64 iopte_pp); + int (*unmap)(struct ps3_dma_region *, + dma_addr_t bus_addr, + unsigned long len); +}; +/** + * struct ps3_dma_region_init - Helper to initialize structure variables + * + * Helper to properly initialize variables prior to calling + * ps3_system_bus_device_register. + */ + +struct ps3_system_bus_device; + +int ps3_dma_region_init(struct ps3_system_bus_device *dev, + struct ps3_dma_region *r, enum ps3_dma_page_size page_size, + enum ps3_dma_region_type region_type, void *addr, unsigned long len); +int ps3_dma_region_create(struct ps3_dma_region *r); +int ps3_dma_region_free(struct ps3_dma_region *r); +int ps3_dma_map(struct ps3_dma_region *r, unsigned long virt_addr, + unsigned long len, dma_addr_t *bus_addr, + u64 iopte_pp); +int ps3_dma_unmap(struct ps3_dma_region *r, dma_addr_t bus_addr, + unsigned long len); + +/* mmio routines */ + +enum ps3_mmio_page_size { + PS3_MMIO_4K = 12U, + PS3_MMIO_64K = 16U +}; + +struct ps3_mmio_region_ops; +/** + * struct ps3_mmio_region - a per device mmio state variables structure + * + * Current systems can be supported with a single region per device. + */ + +struct ps3_mmio_region { + struct ps3_system_bus_device *dev; + const struct ps3_mmio_region_ops *mmio_ops; + unsigned long bus_addr; + unsigned long len; + enum ps3_mmio_page_size page_size; + unsigned long lpar_addr; +}; + +struct ps3_mmio_region_ops { + int (*create)(struct ps3_mmio_region *); + int (*free)(struct ps3_mmio_region *); +}; +/** + * struct ps3_mmio_region_init - Helper to initialize structure variables + * + * Helper to properly initialize variables prior to calling + * ps3_system_bus_device_register. + */ + +int ps3_mmio_region_init(struct ps3_system_bus_device *dev, + struct ps3_mmio_region *r, unsigned long bus_addr, unsigned long len, + enum ps3_mmio_page_size page_size); +int ps3_mmio_region_create(struct ps3_mmio_region *r); +int ps3_free_mmio_region(struct ps3_mmio_region *r); +unsigned long ps3_mm_phys_to_lpar(unsigned long phys_addr); + +/* inrerrupt routines */ + +enum ps3_cpu_binding { + PS3_BINDING_CPU_ANY = -1, + PS3_BINDING_CPU_0 = 0, + PS3_BINDING_CPU_1 = 1, +}; + +int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet, + unsigned int *virq); +int ps3_irq_plug_destroy(unsigned int virq); +int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq); +int ps3_event_receive_port_destroy(unsigned int virq); +int ps3_send_event_locally(unsigned int virq); + +int ps3_io_irq_setup(enum ps3_cpu_binding cpu, unsigned int interrupt_id, + unsigned int *virq); +int ps3_io_irq_destroy(unsigned int virq); +int ps3_vuart_irq_setup(enum ps3_cpu_binding cpu, void* virt_addr_bmp, + unsigned int *virq); +int ps3_vuart_irq_destroy(unsigned int virq); +int ps3_spe_irq_setup(enum ps3_cpu_binding cpu, unsigned long spe_id, + unsigned int class, unsigned int *virq); +int ps3_spe_irq_destroy(unsigned int virq); + +int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev, + enum ps3_cpu_binding cpu, unsigned int *virq); +int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev, + unsigned int virq); + +/* lv1 result codes */ + +enum lv1_result { + LV1_SUCCESS = 0, + /* not used -1 */ + LV1_RESOURCE_SHORTAGE = -2, + LV1_NO_PRIVILEGE = -3, + LV1_DENIED_BY_POLICY = -4, + LV1_ACCESS_VIOLATION = -5, + LV1_NO_ENTRY = -6, + LV1_DUPLICATE_ENTRY = -7, + LV1_TYPE_MISMATCH = -8, + LV1_BUSY = -9, + LV1_EMPTY = -10, + LV1_WRONG_STATE = -11, + /* not used -12 */ + LV1_NO_MATCH = -13, + LV1_ALREADY_CONNECTED = -14, + LV1_UNSUPPORTED_PARAMETER_VALUE = -15, + LV1_CONDITION_NOT_SATISFIED = -16, + LV1_ILLEGAL_PARAMETER_VALUE = -17, + LV1_BAD_OPTION = -18, + LV1_IMPLEMENTATION_LIMITATION = -19, + LV1_NOT_IMPLEMENTED = -20, + LV1_INVALID_CLASS_ID = -21, + LV1_CONSTRAINT_NOT_SATISFIED = -22, + LV1_ALIGNMENT_ERROR = -23, + LV1_HARDWARE_ERROR = -24, + LV1_INVALID_DATA_FORMAT = -25, + LV1_INVALID_OPERATION = -26, + LV1_INTERNAL_ERROR = -32768, +}; + +static inline const char* ps3_result(int result) +{ +#if defined(DEBUG) || defined(PS3_VERBOSE_RESULT) + switch (result) { + case LV1_SUCCESS: + return "LV1_SUCCESS (0)"; + case -1: + return "** unknown result ** (-1)"; + case LV1_RESOURCE_SHORTAGE: + return "LV1_RESOURCE_SHORTAGE (-2)"; + case LV1_NO_PRIVILEGE: + return "LV1_NO_PRIVILEGE (-3)"; + case LV1_DENIED_BY_POLICY: + return "LV1_DENIED_BY_POLICY (-4)"; + case LV1_ACCESS_VIOLATION: + return "LV1_ACCESS_VIOLATION (-5)"; + case LV1_NO_ENTRY: + return "LV1_NO_ENTRY (-6)"; + case LV1_DUPLICATE_ENTRY: + return "LV1_DUPLICATE_ENTRY (-7)"; + case LV1_TYPE_MISMATCH: + return "LV1_TYPE_MISMATCH (-8)"; + case LV1_BUSY: + return "LV1_BUSY (-9)"; + case LV1_EMPTY: + return "LV1_EMPTY (-10)"; + case LV1_WRONG_STATE: + return "LV1_WRONG_STATE (-11)"; + case -12: + return "** unknown result ** (-12)"; + case LV1_NO_MATCH: + return "LV1_NO_MATCH (-13)"; + case LV1_ALREADY_CONNECTED: + return "LV1_ALREADY_CONNECTED (-14)"; + case LV1_UNSUPPORTED_PARAMETER_VALUE: + return "LV1_UNSUPPORTED_PARAMETER_VALUE (-15)"; + case LV1_CONDITION_NOT_SATISFIED: + return "LV1_CONDITION_NOT_SATISFIED (-16)"; + case LV1_ILLEGAL_PARAMETER_VALUE: + return "LV1_ILLEGAL_PARAMETER_VALUE (-17)"; + case LV1_BAD_OPTION: + return "LV1_BAD_OPTION (-18)"; + case LV1_IMPLEMENTATION_LIMITATION: + return "LV1_IMPLEMENTATION_LIMITATION (-19)"; + case LV1_NOT_IMPLEMENTED: + return "LV1_NOT_IMPLEMENTED (-20)"; + case LV1_INVALID_CLASS_ID: + return "LV1_INVALID_CLASS_ID (-21)"; + case LV1_CONSTRAINT_NOT_SATISFIED: + return "LV1_CONSTRAINT_NOT_SATISFIED (-22)"; + case LV1_ALIGNMENT_ERROR: + return "LV1_ALIGNMENT_ERROR (-23)"; + case LV1_HARDWARE_ERROR: + return "LV1_HARDWARE_ERROR (-24)"; + case LV1_INVALID_DATA_FORMAT: + return "LV1_INVALID_DATA_FORMAT (-25)"; + case LV1_INVALID_OPERATION: + return "LV1_INVALID_OPERATION (-26)"; + case LV1_INTERNAL_ERROR: + return "LV1_INTERNAL_ERROR (-32768)"; + default: + BUG(); + return "** unknown result **"; + }; +#else + return ""; +#endif +} + +/* system bus routines */ + +enum ps3_match_id { + PS3_MATCH_ID_EHCI = 1, + PS3_MATCH_ID_OHCI = 2, + PS3_MATCH_ID_GELIC = 3, + PS3_MATCH_ID_AV_SETTINGS = 4, + PS3_MATCH_ID_SYSTEM_MANAGER = 5, + PS3_MATCH_ID_STOR_DISK = 6, + PS3_MATCH_ID_STOR_ROM = 7, + PS3_MATCH_ID_STOR_FLASH = 8, + PS3_MATCH_ID_SOUND = 9, + PS3_MATCH_ID_GPU = 10, + PS3_MATCH_ID_LPM = 11, +}; + +enum ps3_match_sub_id { + PS3_MATCH_SUB_ID_GPU_FB = 1, + PS3_MATCH_SUB_ID_GPU_RAMDISK = 2, +}; + +#define PS3_MODULE_ALIAS_EHCI "ps3:1:0" +#define PS3_MODULE_ALIAS_OHCI "ps3:2:0" +#define PS3_MODULE_ALIAS_GELIC "ps3:3:0" +#define PS3_MODULE_ALIAS_AV_SETTINGS "ps3:4:0" +#define PS3_MODULE_ALIAS_SYSTEM_MANAGER "ps3:5:0" +#define PS3_MODULE_ALIAS_STOR_DISK "ps3:6:0" +#define PS3_MODULE_ALIAS_STOR_ROM "ps3:7:0" +#define PS3_MODULE_ALIAS_STOR_FLASH "ps3:8:0" +#define PS3_MODULE_ALIAS_SOUND "ps3:9:0" +#define PS3_MODULE_ALIAS_GPU_FB "ps3:10:1" +#define PS3_MODULE_ALIAS_GPU_RAMDISK "ps3:10:2" +#define PS3_MODULE_ALIAS_LPM "ps3:11:0" + +enum ps3_system_bus_device_type { + PS3_DEVICE_TYPE_IOC0 = 1, + PS3_DEVICE_TYPE_SB, + PS3_DEVICE_TYPE_VUART, + PS3_DEVICE_TYPE_LPM, +}; + +/** + * struct ps3_system_bus_device - a device on the system bus + */ + +struct ps3_system_bus_device { + enum ps3_match_id match_id; + enum ps3_match_sub_id match_sub_id; + enum ps3_system_bus_device_type dev_type; + + u64 bus_id; /* SB */ + u64 dev_id; /* SB */ + unsigned int interrupt_id; /* SB */ + struct ps3_dma_region *d_region; /* SB, IOC0 */ + struct ps3_mmio_region *m_region; /* SB, IOC0*/ + unsigned int port_number; /* VUART */ + struct { /* LPM */ + u64 node_id; + u64 pu_id; + u64 rights; + } lpm; + +/* struct iommu_table *iommu_table; -- waiting for BenH's cleanups */ + struct device core; + void *driver_priv; /* private driver variables */ +}; + +int ps3_open_hv_device(struct ps3_system_bus_device *dev); +int ps3_close_hv_device(struct ps3_system_bus_device *dev); + +/** + * struct ps3_system_bus_driver - a driver for a device on the system bus + */ + +struct ps3_system_bus_driver { + enum ps3_match_id match_id; + enum ps3_match_sub_id match_sub_id; + struct device_driver core; + int (*probe)(struct ps3_system_bus_device *); + int (*remove)(struct ps3_system_bus_device *); + int (*shutdown)(struct ps3_system_bus_device *); +/* int (*suspend)(struct ps3_system_bus_device *, pm_message_t); */ +/* int (*resume)(struct ps3_system_bus_device *); */ +}; + +int ps3_system_bus_device_register(struct ps3_system_bus_device *dev); +int ps3_system_bus_driver_register(struct ps3_system_bus_driver *drv); +void ps3_system_bus_driver_unregister(struct ps3_system_bus_driver *drv); + +static inline struct ps3_system_bus_driver *ps3_drv_to_system_bus_drv( + struct device_driver *_drv) +{ + return container_of(_drv, struct ps3_system_bus_driver, core); +} +static inline struct ps3_system_bus_device *ps3_dev_to_system_bus_dev( + struct device *_dev) +{ + return container_of(_dev, struct ps3_system_bus_device, core); +} +static inline struct ps3_system_bus_driver * + ps3_system_bus_dev_to_system_bus_drv(struct ps3_system_bus_device *_dev) +{ + BUG_ON(!_dev); + BUG_ON(!_dev->core.driver); + return ps3_drv_to_system_bus_drv(_dev->core.driver); +} + +/** + * ps3_system_bus_set_drvdata - + * @dev: device structure + * @data: Data to set + */ + +static inline void ps3_system_bus_set_drvdata( + struct ps3_system_bus_device *dev, void *data) +{ + dev_set_drvdata(&dev->core, data); +} +static inline void *ps3_system_bus_get_drvdata( + struct ps3_system_bus_device *dev) +{ + return dev_get_drvdata(&dev->core); +} + +/* These two need global scope for get_arch_dma_ops(). */ + +extern struct bus_type ps3_system_bus_type; + +/* system manager */ + +struct ps3_sys_manager_ops { + struct ps3_system_bus_device *dev; + void (*power_off)(struct ps3_system_bus_device *dev); + void (*restart)(struct ps3_system_bus_device *dev); +}; + +void ps3_sys_manager_register_ops(const struct ps3_sys_manager_ops *ops); +void __noreturn ps3_sys_manager_power_off(void); +void __noreturn ps3_sys_manager_restart(void); +void __noreturn ps3_sys_manager_halt(void); +int ps3_sys_manager_get_wol(void); +void ps3_sys_manager_set_wol(int state); + +struct ps3_prealloc { + const char *name; + void *address; + unsigned long size; + unsigned long align; +}; + +extern struct ps3_prealloc ps3fb_videomemory; +extern struct ps3_prealloc ps3flash_bounce_buffer; + +/* logical performance monitor */ + +/** + * enum ps3_lpm_rights - Rigths granted by the system policy module. + * + * @PS3_LPM_RIGHTS_USE_LPM: The right to use the lpm. + * @PS3_LPM_RIGHTS_USE_TB: The right to use the internal trace buffer. + */ + +enum ps3_lpm_rights { + PS3_LPM_RIGHTS_USE_LPM = 0x001, + PS3_LPM_RIGHTS_USE_TB = 0x100, +}; + +/** + * enum ps3_lpm_tb_type - Type of trace buffer lv1 should use. + * + * @PS3_LPM_TB_TYPE_NONE: Do not use a trace buffer. + * @PS3_LPM_RIGHTS_USE_TB: Use the lv1 internal trace buffer. Must have + * rights @PS3_LPM_RIGHTS_USE_TB. + */ + +enum ps3_lpm_tb_type { + PS3_LPM_TB_TYPE_NONE = 0, + PS3_LPM_TB_TYPE_INTERNAL = 1, +}; + +int ps3_lpm_open(enum ps3_lpm_tb_type tb_type, void *tb_cache, + u64 tb_cache_size); +int ps3_lpm_close(void); +int ps3_lpm_copy_tb(unsigned long offset, void *buf, unsigned long count, + unsigned long *bytes_copied); +int ps3_lpm_copy_tb_to_user(unsigned long offset, void __user *buf, + unsigned long count, unsigned long *bytes_copied); +void ps3_set_bookmark(u64 bookmark); +void ps3_set_pm_bookmark(u64 tag, u64 incident, u64 th_id); +int ps3_set_signal(u64 rtas_signal_group, u8 signal_bit, u16 sub_unit, + u8 bus_word); + +u32 ps3_read_phys_ctr(u32 cpu, u32 phys_ctr); +void ps3_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val); +u32 ps3_read_ctr(u32 cpu, u32 ctr); +void ps3_write_ctr(u32 cpu, u32 ctr, u32 val); + +u32 ps3_read_pm07_control(u32 cpu, u32 ctr); +void ps3_write_pm07_control(u32 cpu, u32 ctr, u32 val); +u32 ps3_read_pm(u32 cpu, enum pm_reg_name reg); +void ps3_write_pm(u32 cpu, enum pm_reg_name reg, u32 val); + +u32 ps3_get_ctr_size(u32 cpu, u32 phys_ctr); +void ps3_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size); + +void ps3_enable_pm(u32 cpu); +void ps3_disable_pm(u32 cpu); +void ps3_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask); +void ps3_disable_pm_interrupts(u32 cpu); + +u32 ps3_get_and_clear_pm_interrupts(u32 cpu); +void ps3_sync_irq(int node); +u32 ps3_get_hw_thread_id(int cpu); +u64 ps3_get_spe_id(void *arg); + +void ps3_early_mm_init(void); + +#endif diff --git a/arch/powerpc/include/asm/ps3av.h b/arch/powerpc/include/asm/ps3av.h new file mode 100644 index 000000000..82db78fc1 --- /dev/null +++ b/arch/powerpc/include/asm/ps3av.h @@ -0,0 +1,731 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * PS3 AV backend support. + * + * Copyright (C) 2007 Sony Computer Entertainment Inc. + * Copyright 2007 Sony Corp. + */ + +#ifndef _ASM_POWERPC_PS3AV_H_ +#define _ASM_POWERPC_PS3AV_H_ + +/** command for ioctl() **/ +#define PS3AV_VERSION 0x205 /* version of ps3av command */ + +#define PS3AV_CID_AV_INIT 0x00000001 +#define PS3AV_CID_AV_FIN 0x00000002 +#define PS3AV_CID_AV_GET_HW_CONF 0x00000003 +#define PS3AV_CID_AV_GET_MONITOR_INFO 0x00000004 +#define PS3AV_CID_AV_ENABLE_EVENT 0x00000006 +#define PS3AV_CID_AV_DISABLE_EVENT 0x00000007 +#define PS3AV_CID_AV_TV_MUTE 0x0000000a + +#define PS3AV_CID_AV_VIDEO_CS 0x00010001 +#define PS3AV_CID_AV_VIDEO_MUTE 0x00010002 +#define PS3AV_CID_AV_VIDEO_DISABLE_SIG 0x00010003 +#define PS3AV_CID_AV_AUDIO_PARAM 0x00020001 +#define PS3AV_CID_AV_AUDIO_MUTE 0x00020002 +#define PS3AV_CID_AV_HDMI_MODE 0x00040001 + +#define PS3AV_CID_VIDEO_INIT 0x01000001 +#define PS3AV_CID_VIDEO_MODE 0x01000002 +#define PS3AV_CID_VIDEO_FORMAT 0x01000004 +#define PS3AV_CID_VIDEO_PITCH 0x01000005 + +#define PS3AV_CID_AUDIO_INIT 0x02000001 +#define PS3AV_CID_AUDIO_MODE 0x02000002 +#define PS3AV_CID_AUDIO_MUTE 0x02000003 +#define PS3AV_CID_AUDIO_ACTIVE 0x02000004 +#define PS3AV_CID_AUDIO_INACTIVE 0x02000005 +#define PS3AV_CID_AUDIO_SPDIF_BIT 0x02000006 +#define PS3AV_CID_AUDIO_CTRL 0x02000007 + +#define PS3AV_CID_EVENT_UNPLUGGED 0x10000001 +#define PS3AV_CID_EVENT_PLUGGED 0x10000002 +#define PS3AV_CID_EVENT_HDCP_DONE 0x10000003 +#define PS3AV_CID_EVENT_HDCP_FAIL 0x10000004 +#define PS3AV_CID_EVENT_HDCP_AUTH 0x10000005 +#define PS3AV_CID_EVENT_HDCP_ERROR 0x10000006 + +#define PS3AV_CID_AVB_PARAM 0x04000001 + +/* max backend ports */ +#define PS3AV_HDMI_MAX 2 /* HDMI_0 HDMI_1 */ +#define PS3AV_AVMULTI_MAX 1 /* AVMULTI_0 */ +#define PS3AV_AV_PORT_MAX (PS3AV_HDMI_MAX + PS3AV_AVMULTI_MAX) +#define PS3AV_OPT_PORT_MAX 1 /* SPDIF0 */ +#define PS3AV_HEAD_MAX 2 /* HEAD_A HEAD_B */ + +/* num of pkt for PS3AV_CID_AVB_PARAM */ +#define PS3AV_AVB_NUM_VIDEO PS3AV_HEAD_MAX +#define PS3AV_AVB_NUM_AUDIO 0 /* not supported */ +#define PS3AV_AVB_NUM_AV_VIDEO PS3AV_AV_PORT_MAX +#define PS3AV_AVB_NUM_AV_AUDIO PS3AV_HDMI_MAX + +#define PS3AV_MUTE_PORT_MAX 1 /* num of ports in mute pkt */ + +/* event_bit */ +#define PS3AV_CMD_EVENT_BIT_UNPLUGGED (1 << 0) +#define PS3AV_CMD_EVENT_BIT_PLUGGED (1 << 1) +#define PS3AV_CMD_EVENT_BIT_HDCP_DONE (1 << 2) +#define PS3AV_CMD_EVENT_BIT_HDCP_FAIL (1 << 3) +#define PS3AV_CMD_EVENT_BIT_HDCP_REAUTH (1 << 4) +#define PS3AV_CMD_EVENT_BIT_HDCP_TOPOLOGY (1 << 5) + +/* common params */ +/* mute */ +#define PS3AV_CMD_MUTE_OFF 0x0000 +#define PS3AV_CMD_MUTE_ON 0x0001 +/* avport */ +#define PS3AV_CMD_AVPORT_HDMI_0 0x0000 +#define PS3AV_CMD_AVPORT_HDMI_1 0x0001 +#define PS3AV_CMD_AVPORT_AVMULTI_0 0x0010 +#define PS3AV_CMD_AVPORT_SPDIF_0 0x0020 +#define PS3AV_CMD_AVPORT_SPDIF_1 0x0021 + +/* for av backend */ +/* av_mclk */ +#define PS3AV_CMD_AV_MCLK_128 0x0000 +#define PS3AV_CMD_AV_MCLK_256 0x0001 +#define PS3AV_CMD_AV_MCLK_512 0x0003 +/* av_inputlen */ +#define PS3AV_CMD_AV_INPUTLEN_16 0x02 +#define PS3AV_CMD_AV_INPUTLEN_20 0x0a +#define PS3AV_CMD_AV_INPUTLEN_24 0x0b +/* av_layout */ +#define PS3AV_CMD_AV_LAYOUT_32 (1 << 0) +#define PS3AV_CMD_AV_LAYOUT_44 (1 << 1) +#define PS3AV_CMD_AV_LAYOUT_48 (1 << 2) +#define PS3AV_CMD_AV_LAYOUT_88 (1 << 3) +#define PS3AV_CMD_AV_LAYOUT_96 (1 << 4) +#define PS3AV_CMD_AV_LAYOUT_176 (1 << 5) +#define PS3AV_CMD_AV_LAYOUT_192 (1 << 6) +/* hdmi_mode */ +#define PS3AV_CMD_AV_HDMI_MODE_NORMAL 0xff +#define PS3AV_CMD_AV_HDMI_HDCP_OFF 0x01 +#define PS3AV_CMD_AV_HDMI_EDID_PASS 0x80 +#define PS3AV_CMD_AV_HDMI_DVI 0x40 + +/* for video module */ +/* video_head */ +#define PS3AV_CMD_VIDEO_HEAD_A 0x0000 +#define PS3AV_CMD_VIDEO_HEAD_B 0x0001 +/* video_cs_out video_cs_in */ +#define PS3AV_CMD_VIDEO_CS_NONE 0x0000 +#define PS3AV_CMD_VIDEO_CS_RGB_8 0x0001 +#define PS3AV_CMD_VIDEO_CS_YUV444_8 0x0002 +#define PS3AV_CMD_VIDEO_CS_YUV422_8 0x0003 +#define PS3AV_CMD_VIDEO_CS_XVYCC_8 0x0004 +#define PS3AV_CMD_VIDEO_CS_RGB_10 0x0005 +#define PS3AV_CMD_VIDEO_CS_YUV444_10 0x0006 +#define PS3AV_CMD_VIDEO_CS_YUV422_10 0x0007 +#define PS3AV_CMD_VIDEO_CS_XVYCC_10 0x0008 +#define PS3AV_CMD_VIDEO_CS_RGB_12 0x0009 +#define PS3AV_CMD_VIDEO_CS_YUV444_12 0x000a +#define PS3AV_CMD_VIDEO_CS_YUV422_12 0x000b +#define PS3AV_CMD_VIDEO_CS_XVYCC_12 0x000c +/* video_vid */ +#define PS3AV_CMD_VIDEO_VID_NONE 0x0000 +#define PS3AV_CMD_VIDEO_VID_480I 0x0001 +#define PS3AV_CMD_VIDEO_VID_576I 0x0003 +#define PS3AV_CMD_VIDEO_VID_480P 0x0005 +#define PS3AV_CMD_VIDEO_VID_576P 0x0006 +#define PS3AV_CMD_VIDEO_VID_1080I_60HZ 0x0007 +#define PS3AV_CMD_VIDEO_VID_1080I_50HZ 0x0008 +#define PS3AV_CMD_VIDEO_VID_720P_60HZ 0x0009 +#define PS3AV_CMD_VIDEO_VID_720P_50HZ 0x000a +#define PS3AV_CMD_VIDEO_VID_1080P_60HZ 0x000b +#define PS3AV_CMD_VIDEO_VID_1080P_50HZ 0x000c +#define PS3AV_CMD_VIDEO_VID_WXGA 0x000d +#define PS3AV_CMD_VIDEO_VID_SXGA 0x000e +#define PS3AV_CMD_VIDEO_VID_WUXGA 0x000f +#define PS3AV_CMD_VIDEO_VID_480I_A 0x0010 +/* video_format */ +#define PS3AV_CMD_VIDEO_FORMAT_BLACK 0x0000 +#define PS3AV_CMD_VIDEO_FORMAT_ARGB_8BIT 0x0007 +/* video_order */ +#define PS3AV_CMD_VIDEO_ORDER_RGB 0x0000 +#define PS3AV_CMD_VIDEO_ORDER_BGR 0x0001 +/* video_fmt */ +#define PS3AV_CMD_VIDEO_FMT_X8R8G8B8 0x0000 +/* video_out_format */ +#define PS3AV_CMD_VIDEO_OUT_FORMAT_RGB_12BIT 0x0000 +/* video_cl_cnv */ +#define PS3AV_CMD_VIDEO_CL_CNV_ENABLE_LUT 0x0000 +#define PS3AV_CMD_VIDEO_CL_CNV_DISABLE_LUT 0x0010 +/* video_sync */ +#define PS3AV_CMD_VIDEO_SYNC_VSYNC 0x0001 +#define PS3AV_CMD_VIDEO_SYNC_CSYNC 0x0004 +#define PS3AV_CMD_VIDEO_SYNC_HSYNC 0x0010 + +/* for audio module */ +/* num_of_ch */ +#define PS3AV_CMD_AUDIO_NUM_OF_CH_2 0x0000 +#define PS3AV_CMD_AUDIO_NUM_OF_CH_3 0x0001 +#define PS3AV_CMD_AUDIO_NUM_OF_CH_4 0x0002 +#define PS3AV_CMD_AUDIO_NUM_OF_CH_5 0x0003 +#define PS3AV_CMD_AUDIO_NUM_OF_CH_6 0x0004 +#define PS3AV_CMD_AUDIO_NUM_OF_CH_7 0x0005 +#define PS3AV_CMD_AUDIO_NUM_OF_CH_8 0x0006 +/* audio_fs */ +#define PS3AV_CMD_AUDIO_FS_32K 0x0001 +#define PS3AV_CMD_AUDIO_FS_44K 0x0002 +#define PS3AV_CMD_AUDIO_FS_48K 0x0003 +#define PS3AV_CMD_AUDIO_FS_88K 0x0004 +#define PS3AV_CMD_AUDIO_FS_96K 0x0005 +#define PS3AV_CMD_AUDIO_FS_176K 0x0006 +#define PS3AV_CMD_AUDIO_FS_192K 0x0007 +/* audio_word_bits */ +#define PS3AV_CMD_AUDIO_WORD_BITS_16 0x0001 +#define PS3AV_CMD_AUDIO_WORD_BITS_20 0x0002 +#define PS3AV_CMD_AUDIO_WORD_BITS_24 0x0003 +/* audio_format */ +#define PS3AV_CMD_AUDIO_FORMAT_PCM 0x0001 +#define PS3AV_CMD_AUDIO_FORMAT_BITSTREAM 0x00ff +/* audio_source */ +#define PS3AV_CMD_AUDIO_SOURCE_SERIAL 0x0000 +#define PS3AV_CMD_AUDIO_SOURCE_SPDIF 0x0001 +/* audio_swap */ +#define PS3AV_CMD_AUDIO_SWAP_0 0x0000 +#define PS3AV_CMD_AUDIO_SWAP_1 0x0000 +/* audio_map */ +#define PS3AV_CMD_AUDIO_MAP_OUTPUT_0 0x0000 +#define PS3AV_CMD_AUDIO_MAP_OUTPUT_1 0x0001 +#define PS3AV_CMD_AUDIO_MAP_OUTPUT_2 0x0002 +#define PS3AV_CMD_AUDIO_MAP_OUTPUT_3 0x0003 +/* audio_layout */ +#define PS3AV_CMD_AUDIO_LAYOUT_2CH 0x0000 +#define PS3AV_CMD_AUDIO_LAYOUT_6CH 0x000b /* LREClr */ +#define PS3AV_CMD_AUDIO_LAYOUT_8CH 0x001f /* LREClrXY */ +/* audio_downmix */ +#define PS3AV_CMD_AUDIO_DOWNMIX_PERMITTED 0x0000 +#define PS3AV_CMD_AUDIO_DOWNMIX_PROHIBITED 0x0001 + +/* audio_port */ +#define PS3AV_CMD_AUDIO_PORT_HDMI_0 ( 1 << 0 ) +#define PS3AV_CMD_AUDIO_PORT_HDMI_1 ( 1 << 1 ) +#define PS3AV_CMD_AUDIO_PORT_AVMULTI_0 ( 1 << 10 ) +#define PS3AV_CMD_AUDIO_PORT_SPDIF_0 ( 1 << 20 ) +#define PS3AV_CMD_AUDIO_PORT_SPDIF_1 ( 1 << 21 ) + +/* audio_ctrl_id */ +#define PS3AV_CMD_AUDIO_CTRL_ID_DAC_RESET 0x0000 +#define PS3AV_CMD_AUDIO_CTRL_ID_DAC_DE_EMPHASIS 0x0001 +#define PS3AV_CMD_AUDIO_CTRL_ID_AVCLK 0x0002 +/* audio_ctrl_data[0] reset */ +#define PS3AV_CMD_AUDIO_CTRL_RESET_NEGATE 0x0000 +#define PS3AV_CMD_AUDIO_CTRL_RESET_ASSERT 0x0001 +/* audio_ctrl_data[0] de-emphasis */ +#define PS3AV_CMD_AUDIO_CTRL_DE_EMPHASIS_OFF 0x0000 +#define PS3AV_CMD_AUDIO_CTRL_DE_EMPHASIS_ON 0x0001 +/* audio_ctrl_data[0] avclk */ +#define PS3AV_CMD_AUDIO_CTRL_AVCLK_22 0x0000 +#define PS3AV_CMD_AUDIO_CTRL_AVCLK_18 0x0001 + +/* av_vid */ +/* do not use these params directly, use vid_video2av */ +#define PS3AV_CMD_AV_VID_480I 0x0000 +#define PS3AV_CMD_AV_VID_480P 0x0001 +#define PS3AV_CMD_AV_VID_720P_60HZ 0x0002 +#define PS3AV_CMD_AV_VID_1080I_60HZ 0x0003 +#define PS3AV_CMD_AV_VID_1080P_60HZ 0x0004 +#define PS3AV_CMD_AV_VID_576I 0x0005 +#define PS3AV_CMD_AV_VID_576P 0x0006 +#define PS3AV_CMD_AV_VID_720P_50HZ 0x0007 +#define PS3AV_CMD_AV_VID_1080I_50HZ 0x0008 +#define PS3AV_CMD_AV_VID_1080P_50HZ 0x0009 +#define PS3AV_CMD_AV_VID_WXGA 0x000a +#define PS3AV_CMD_AV_VID_SXGA 0x000b +#define PS3AV_CMD_AV_VID_WUXGA 0x000c +/* av_cs_out av_cs_in */ +/* use cs_video2av() */ +#define PS3AV_CMD_AV_CS_RGB_8 0x0000 +#define PS3AV_CMD_AV_CS_YUV444_8 0x0001 +#define PS3AV_CMD_AV_CS_YUV422_8 0x0002 +#define PS3AV_CMD_AV_CS_XVYCC_8 0x0003 +#define PS3AV_CMD_AV_CS_RGB_10 0x0004 +#define PS3AV_CMD_AV_CS_YUV444_10 0x0005 +#define PS3AV_CMD_AV_CS_YUV422_10 0x0006 +#define PS3AV_CMD_AV_CS_XVYCC_10 0x0007 +#define PS3AV_CMD_AV_CS_RGB_12 0x0008 +#define PS3AV_CMD_AV_CS_YUV444_12 0x0009 +#define PS3AV_CMD_AV_CS_YUV422_12 0x000a +#define PS3AV_CMD_AV_CS_XVYCC_12 0x000b +#define PS3AV_CMD_AV_CS_8 0x0000 +#define PS3AV_CMD_AV_CS_10 0x0001 +#define PS3AV_CMD_AV_CS_12 0x0002 +/* dither */ +#define PS3AV_CMD_AV_DITHER_OFF 0x0000 +#define PS3AV_CMD_AV_DITHER_ON 0x0001 +#define PS3AV_CMD_AV_DITHER_8BIT 0x0000 +#define PS3AV_CMD_AV_DITHER_10BIT 0x0002 +#define PS3AV_CMD_AV_DITHER_12BIT 0x0004 +/* super_white */ +#define PS3AV_CMD_AV_SUPER_WHITE_OFF 0x0000 +#define PS3AV_CMD_AV_SUPER_WHITE_ON 0x0001 +/* aspect */ +#define PS3AV_CMD_AV_ASPECT_16_9 0x0000 +#define PS3AV_CMD_AV_ASPECT_4_3 0x0001 +/* video_cs_cnv() */ +#define PS3AV_CMD_VIDEO_CS_RGB 0x0001 +#define PS3AV_CMD_VIDEO_CS_YUV422 0x0002 +#define PS3AV_CMD_VIDEO_CS_YUV444 0x0003 + +/* for broadcast automode */ +#define PS3AV_RESBIT_720x480P 0x0003 /* 0x0001 | 0x0002 */ +#define PS3AV_RESBIT_720x576P 0x0003 /* 0x0001 | 0x0002 */ +#define PS3AV_RESBIT_1280x720P 0x0004 +#define PS3AV_RESBIT_1920x1080I 0x0008 +#define PS3AV_RESBIT_1920x1080P 0x4000 +#define PS3AV_RES_MASK_60 (PS3AV_RESBIT_720x480P \ + | PS3AV_RESBIT_1280x720P \ + | PS3AV_RESBIT_1920x1080I \ + | PS3AV_RESBIT_1920x1080P) +#define PS3AV_RES_MASK_50 (PS3AV_RESBIT_720x576P \ + | PS3AV_RESBIT_1280x720P \ + | PS3AV_RESBIT_1920x1080I \ + | PS3AV_RESBIT_1920x1080P) + +/* for VESA automode */ +#define PS3AV_RESBIT_VGA 0x0001 +#define PS3AV_RESBIT_WXGA 0x0002 +#define PS3AV_RESBIT_SXGA 0x0004 +#define PS3AV_RESBIT_WUXGA 0x0008 +#define PS3AV_RES_MASK_VESA (PS3AV_RESBIT_WXGA |\ + PS3AV_RESBIT_SXGA |\ + PS3AV_RESBIT_WUXGA) + +#define PS3AV_MONITOR_TYPE_HDMI 1 /* HDMI */ +#define PS3AV_MONITOR_TYPE_DVI 2 /* DVI */ + + +/* for video mode */ +enum ps3av_mode_num { + PS3AV_MODE_AUTO = 0, + PS3AV_MODE_480I = 1, + PS3AV_MODE_480P = 2, + PS3AV_MODE_720P60 = 3, + PS3AV_MODE_1080I60 = 4, + PS3AV_MODE_1080P60 = 5, + PS3AV_MODE_576I = 6, + PS3AV_MODE_576P = 7, + PS3AV_MODE_720P50 = 8, + PS3AV_MODE_1080I50 = 9, + PS3AV_MODE_1080P50 = 10, + PS3AV_MODE_WXGA = 11, + PS3AV_MODE_SXGA = 12, + PS3AV_MODE_WUXGA = 13, +}; + +#define PS3AV_MODE_MASK 0x000F +#define PS3AV_MODE_HDCP_OFF 0x1000 /* Retail PS3 product doesn't support this */ +#define PS3AV_MODE_DITHER 0x0800 +#define PS3AV_MODE_COLOR 0x0400 +#define PS3AV_MODE_WHITE 0x0200 +#define PS3AV_MODE_FULL 0x0080 +#define PS3AV_MODE_DVI 0x0040 +#define PS3AV_MODE_RGB 0x0020 + + +#define PS3AV_DEFAULT_HDMI_MODE_ID_REG_60 PS3AV_MODE_480P +#define PS3AV_DEFAULT_AVMULTI_MODE_ID_REG_60 PS3AV_MODE_480I +#define PS3AV_DEFAULT_HDMI_MODE_ID_REG_50 PS3AV_MODE_576P +#define PS3AV_DEFAULT_AVMULTI_MODE_ID_REG_50 PS3AV_MODE_576I + +#define PS3AV_REGION_60 0x01 +#define PS3AV_REGION_50 0x02 +#define PS3AV_REGION_RGB 0x10 + +#define get_status(buf) (((__u32 *)buf)[2]) +#define PS3AV_HDR_SIZE 4 /* version + size */ + + +/** command packet structure **/ +struct ps3av_send_hdr { + u16 version; + u16 size; /* size of command packet */ + u32 cid; /* command id */ +}; + +struct ps3av_reply_hdr { + u16 version; + u16 size; + u32 cid; + u32 status; +}; + +/* backend: initialization */ +struct ps3av_pkt_av_init { + struct ps3av_send_hdr send_hdr; + u32 event_bit; +}; + +/* backend: finalize */ +struct ps3av_pkt_av_fin { + struct ps3av_send_hdr send_hdr; + /* recv */ + u32 reserved; +}; + +/* backend: get port */ +struct ps3av_pkt_av_get_hw_conf { + struct ps3av_send_hdr send_hdr; + /* recv */ + u32 status; + u16 num_of_hdmi; /* out: number of hdmi */ + u16 num_of_avmulti; /* out: number of avmulti */ + u16 num_of_spdif; /* out: number of hdmi */ + u16 reserved; +}; + +/* backend: get monitor info */ +struct ps3av_info_resolution { + u32 res_bits; + u32 native; +}; + +struct ps3av_info_cs { + u8 rgb; + u8 yuv444; + u8 yuv422; + u8 reserved; +}; + +struct ps3av_info_color { + u16 red_x; + u16 red_y; + u16 green_x; + u16 green_y; + u16 blue_x; + u16 blue_y; + u16 white_x; + u16 white_y; + u32 gamma; +}; + +struct ps3av_info_audio { + u8 type; + u8 max_num_of_ch; + u8 fs; + u8 sbit; +}; + +struct ps3av_info_monitor { + u8 avport; + u8 monitor_id[10]; + u8 monitor_type; + u8 monitor_name[16]; + struct ps3av_info_resolution res_60; + struct ps3av_info_resolution res_50; + struct ps3av_info_resolution res_other; + struct ps3av_info_resolution res_vesa; + struct ps3av_info_cs cs; + struct ps3av_info_color color; + u8 supported_ai; + u8 speaker_info; + u8 num_of_audio_block; + struct ps3av_info_audio audio[0]; /* 0 or more audio blocks */ + u8 reserved[169]; +} __attribute__ ((packed)); + +struct ps3av_pkt_av_get_monitor_info { + struct ps3av_send_hdr send_hdr; + u16 avport; /* in: avport */ + u16 reserved; + /* recv */ + struct ps3av_info_monitor info; /* out: monitor info */ +}; + +/* backend: enable/disable event */ +struct ps3av_pkt_av_event { + struct ps3av_send_hdr send_hdr; + u32 event_bit; /* in */ +}; + +/* backend: video cs param */ +struct ps3av_pkt_av_video_cs { + struct ps3av_send_hdr send_hdr; + u16 avport; /* in: avport */ + u16 av_vid; /* in: video resolution */ + u16 av_cs_out; /* in: output color space */ + u16 av_cs_in; /* in: input color space */ + u8 dither; /* in: dither bit length */ + u8 bitlen_out; /* in: bit length */ + u8 super_white; /* in: super white */ + u8 aspect; /* in: aspect ratio */ +}; + +/* backend: video mute */ +struct ps3av_av_mute { + u16 avport; /* in: avport */ + u16 mute; /* in: mute on/off */ +}; + +struct ps3av_pkt_av_video_mute { + struct ps3av_send_hdr send_hdr; + struct ps3av_av_mute mute[PS3AV_MUTE_PORT_MAX]; +}; + +/* backend: video disable signal */ +struct ps3av_pkt_av_video_disable_sig { + struct ps3av_send_hdr send_hdr; + u16 avport; /* in: avport */ + u16 reserved; +}; + +/* backend: audio param */ +struct ps3av_audio_info_frame { + struct pb1_bit { + u8 ct:4; + u8 rsv:1; + u8 cc:3; + } pb1; + struct pb2_bit { + u8 rsv:3; + u8 sf:3; + u8 ss:2; + } pb2; + u8 pb3; + u8 pb4; + struct pb5_bit { + u8 dm:1; + u8 lsv:4; + u8 rsv:3; + } pb5; +}; + +struct ps3av_pkt_av_audio_param { + struct ps3av_send_hdr send_hdr; + u16 avport; /* in: avport */ + u16 reserved; + u8 mclk; /* in: audio mclk */ + u8 ns[3]; /* in: audio ns val */ + u8 enable; /* in: audio enable */ + u8 swaplr; /* in: audio swap */ + u8 fifomap; /* in: audio fifomap */ + u8 inputctrl; /* in: audio input ctrl */ + u8 inputlen; /* in: sample bit size */ + u8 layout; /* in: speaker layout param */ + struct ps3av_audio_info_frame info; /* in: info */ + u8 chstat[5]; /* in: ch stat */ +}; + +/* backend: audio_mute */ +struct ps3av_pkt_av_audio_mute { + struct ps3av_send_hdr send_hdr; + struct ps3av_av_mute mute[PS3AV_MUTE_PORT_MAX]; +}; + +/* backend: hdmi_mode */ +struct ps3av_pkt_av_hdmi_mode { + struct ps3av_send_hdr send_hdr; + u8 mode; /* in: hdmi_mode */ + u8 reserved0; + u8 reserved1; + u8 reserved2; +}; + +/* backend: tv_mute */ +struct ps3av_pkt_av_tv_mute { + struct ps3av_send_hdr send_hdr; + u16 avport; /* in: avport HDMI only */ + u16 mute; /* in: mute */ +}; + +/* video: initialize */ +struct ps3av_pkt_video_init { + struct ps3av_send_hdr send_hdr; + /* recv */ + u32 reserved; +}; + +/* video: mode setting */ +struct ps3av_pkt_video_mode { + struct ps3av_send_hdr send_hdr; + u32 video_head; /* in: head */ + u32 reserved; + u32 video_vid; /* in: video resolution */ + u16 reserved1; + u16 width; /* in: width in pixel */ + u16 reserved2; + u16 height; /* in: height in pixel */ + u32 pitch; /* in: line size in byte */ + u32 video_out_format; /* in: out format */ + u32 video_format; /* in: input frame buffer format */ + u8 reserved3; + u8 video_cl_cnv; /* in: color conversion */ + u16 video_order; /* in: input RGB order */ + u32 reserved4; +}; + +/* video: format */ +struct ps3av_pkt_video_format { + struct ps3av_send_hdr send_hdr; + u32 video_head; /* in: head */ + u32 video_format; /* in: frame buffer format */ + u8 reserved; + u8 video_cl_cnv; /* in: color conversion */ + u16 video_order; /* in: input RGB order */ +}; + +/* video: pitch */ +struct ps3av_pkt_video_pitch { + u16 version; + u16 size; /* size of command packet */ + u32 cid; /* command id */ + u32 video_head; /* in: head */ + u32 pitch; /* in: line size in byte */ +}; + +/* audio: initialize */ +struct ps3av_pkt_audio_init { + struct ps3av_send_hdr send_hdr; + /* recv */ + u32 reserved; +}; + +/* audio: mode setting */ +struct ps3av_pkt_audio_mode { + struct ps3av_send_hdr send_hdr; + u8 avport; /* in: avport */ + u8 reserved0[3]; + u32 mask; /* in: mask */ + u32 audio_num_of_ch; /* in: number of ch */ + u32 audio_fs; /* in: sampling freq */ + u32 audio_word_bits; /* in: sample bit size */ + u32 audio_format; /* in: audio output format */ + u32 audio_source; /* in: audio source */ + u8 audio_enable[4]; /* in: audio enable */ + u8 audio_swap[4]; /* in: audio swap */ + u8 audio_map[4]; /* in: audio map */ + u32 audio_layout; /* in: speaker layout */ + u32 audio_downmix; /* in: audio downmix permission */ + u32 audio_downmix_level; + u8 audio_cs_info[8]; /* in: IEC channel status */ +}; + +/* audio: mute */ +struct ps3av_audio_mute { + u8 avport; /* in: opt_port optical */ + u8 reserved[3]; + u32 mute; /* in: mute */ +}; + +struct ps3av_pkt_audio_mute { + struct ps3av_send_hdr send_hdr; + struct ps3av_audio_mute mute[PS3AV_OPT_PORT_MAX]; +}; + +/* audio: active/inactive */ +struct ps3av_pkt_audio_active { + struct ps3av_send_hdr send_hdr; + u32 audio_port; /* in: audio active/inactive port */ +}; + +/* audio: SPDIF user bit */ +struct ps3av_pkt_audio_spdif_bit { + u16 version; + u16 size; /* size of command packet */ + u32 cid; /* command id */ + u8 avport; /* in: avport SPDIF only */ + u8 reserved[3]; + u32 audio_port; /* in: SPDIF only */ + u32 spdif_bit_data[12]; /* in: user bit data */ +}; + +/* audio: audio control */ +struct ps3av_pkt_audio_ctrl { + u16 version; + u16 size; /* size of command packet */ + u32 cid; /* command id */ + u32 audio_ctrl_id; /* in: control id */ + u32 audio_ctrl_data[4]; /* in: control data */ +}; + +/* avb:param */ +#define PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE \ + (PS3AV_AVB_NUM_VIDEO*sizeof(struct ps3av_pkt_video_mode) + \ + PS3AV_AVB_NUM_AUDIO*sizeof(struct ps3av_pkt_audio_mode) + \ + PS3AV_AVB_NUM_AV_VIDEO*sizeof(struct ps3av_pkt_av_video_cs) + \ + PS3AV_AVB_NUM_AV_AUDIO*sizeof(struct ps3av_pkt_av_audio_param)) + +struct ps3av_pkt_avb_param { + struct ps3av_send_hdr send_hdr; + u16 num_of_video_pkt; + u16 num_of_audio_pkt; + u16 num_of_av_video_pkt; + u16 num_of_av_audio_pkt; + /* + * The actual buffer layout depends on the fields above: + * + * struct ps3av_pkt_video_mode video[num_of_video_pkt]; + * struct ps3av_pkt_audio_mode audio[num_of_audio_pkt]; + * struct ps3av_pkt_av_video_cs av_video[num_of_av_video_pkt]; + * struct ps3av_pkt_av_audio_param av_audio[num_of_av_audio_pkt]; + */ + u8 buf[PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE]; +}; + +/* channel status */ +extern u8 ps3av_mode_cs_info[]; + +/** command status **/ +#define PS3AV_STATUS_SUCCESS 0x0000 /* success */ +#define PS3AV_STATUS_RECEIVE_VUART_ERROR 0x0001 /* receive vuart error */ +#define PS3AV_STATUS_SYSCON_COMMUNICATE_FAIL 0x0002 /* syscon communication error */ +#define PS3AV_STATUS_INVALID_COMMAND 0x0003 /* obsolete invalid CID */ +#define PS3AV_STATUS_INVALID_PORT 0x0004 /* invalid port number */ +#define PS3AV_STATUS_INVALID_VID 0x0005 /* invalid video format */ +#define PS3AV_STATUS_INVALID_COLOR_SPACE 0x0006 /* invalid video colose space */ +#define PS3AV_STATUS_INVALID_FS 0x0007 /* invalid audio sampling freq */ +#define PS3AV_STATUS_INVALID_AUDIO_CH 0x0008 /* invalid audio channel number */ +#define PS3AV_STATUS_UNSUPPORTED_VERSION 0x0009 /* version mismatch */ +#define PS3AV_STATUS_INVALID_SAMPLE_SIZE 0x000a /* invalid audio sample bit size */ +#define PS3AV_STATUS_FAILURE 0x000b /* other failures */ +#define PS3AV_STATUS_UNSUPPORTED_COMMAND 0x000c /* unsupported cid */ +#define PS3AV_STATUS_BUFFER_OVERFLOW 0x000d /* write buffer overflow */ +#define PS3AV_STATUS_INVALID_VIDEO_PARAM 0x000e /* invalid video param */ +#define PS3AV_STATUS_NO_SEL 0x000f /* not exist selector */ +#define PS3AV_STATUS_INVALID_AV_PARAM 0x0010 /* invalid backend param */ +#define PS3AV_STATUS_INVALID_AUDIO_PARAM 0x0011 /* invalid audio param */ +#define PS3AV_STATUS_UNSUPPORTED_HDMI_MODE 0x0012 /* unsupported hdmi mode */ +#define PS3AV_STATUS_NO_SYNC_HEAD 0x0013 /* sync head failed */ + +extern void ps3av_set_hdr(u32, u16, struct ps3av_send_hdr *); +extern int ps3av_do_pkt(u32, u16, size_t, struct ps3av_send_hdr *); + +extern int ps3av_cmd_init(void); +extern int ps3av_cmd_fin(void); +extern int ps3av_cmd_av_video_mute(int, u32 *, u32); +extern int ps3av_cmd_av_video_disable_sig(u32); +extern int ps3av_cmd_av_tv_mute(u32, u32); +extern int ps3av_cmd_enable_event(void); +extern int ps3av_cmd_av_hdmi_mode(u8); +extern u32 ps3av_cmd_set_av_video_cs(void *, u32, int, int, int, u32); +extern u32 ps3av_cmd_set_video_mode(void *, u32, int, int, u32); +extern int ps3av_cmd_video_format_black(u32, u32, u32); +extern int ps3av_cmd_av_audio_mute(int, u32 *, u32); +extern u32 ps3av_cmd_set_av_audio_param(void *, u32, + const struct ps3av_pkt_audio_mode *, + u32); +extern void ps3av_cmd_set_audio_mode(struct ps3av_pkt_audio_mode *, u32, u32, + u32, u32, u32, u32); +extern int ps3av_cmd_audio_mode(struct ps3av_pkt_audio_mode *); +extern int ps3av_cmd_audio_mute(int, u32 *, u32); +extern int ps3av_cmd_audio_active(int, u32); +extern int ps3av_cmd_avb_param(struct ps3av_pkt_avb_param *, u32); +extern int ps3av_cmd_av_get_hw_conf(struct ps3av_pkt_av_get_hw_conf *); +extern int ps3av_cmd_video_get_monitor_info(struct ps3av_pkt_av_get_monitor_info *, + u32); + +extern int ps3av_set_video_mode(int); +extern int ps3av_set_audio_mode(u32, u32, u32, u32, u32); +extern int ps3av_get_auto_mode(void); +extern int ps3av_get_mode(void); +extern int ps3av_video_mode2res(u32, u32 *, u32 *); +extern int ps3av_video_mute(int); +extern int ps3av_audio_mute(int); +extern int ps3av_audio_mute_analog(int); +extern int ps3av_dev_open(void); +extern int ps3av_dev_close(void); +#endif /* _ASM_POWERPC_PS3AV_H_ */ diff --git a/arch/powerpc/include/asm/ps3gpu.h b/arch/powerpc/include/asm/ps3gpu.h new file mode 100644 index 000000000..9645c3047 --- /dev/null +++ b/arch/powerpc/include/asm/ps3gpu.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * PS3 GPU declarations. + * + * Copyright 2009 Sony Corporation + */ + +#ifndef _ASM_POWERPC_PS3GPU_H +#define _ASM_POWERPC_PS3GPU_H + +#include <linux/mutex.h> + +#include <asm/lv1call.h> + + +#define L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_SYNC 0x101 +#define L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_FLIP 0x102 + +#define L1GPU_CONTEXT_ATTRIBUTE_FB_SETUP 0x600 +#define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT 0x601 +#define L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT_SYNC 0x602 +#define L1GPU_CONTEXT_ATTRIBUTE_FB_CLOSE 0x603 + +#define L1GPU_FB_BLIT_WAIT_FOR_COMPLETION (1ULL << 32) + +#define L1GPU_DISPLAY_SYNC_HSYNC 1 +#define L1GPU_DISPLAY_SYNC_VSYNC 2 + + +/* mutex synchronizing GPU accesses and video mode changes */ +extern struct mutex ps3_gpu_mutex; + + +static inline int lv1_gpu_display_sync(u64 context_handle, u64 head, + u64 ddr_offset) +{ + return lv1_gpu_context_attribute(context_handle, + L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_SYNC, + head, ddr_offset, 0, 0); +} + +static inline int lv1_gpu_display_flip(u64 context_handle, u64 head, + u64 ddr_offset) +{ + return lv1_gpu_context_attribute(context_handle, + L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_FLIP, + head, ddr_offset, 0, 0); +} + +static inline int lv1_gpu_fb_setup(u64 context_handle, u64 xdr_lpar, + u64 xdr_size, u64 ioif_offset) +{ + return lv1_gpu_context_attribute(context_handle, + L1GPU_CONTEXT_ATTRIBUTE_FB_SETUP, + xdr_lpar, xdr_size, ioif_offset, 0); +} + +static inline int lv1_gpu_fb_blit(u64 context_handle, u64 ddr_offset, + u64 ioif_offset, u64 sync_width, u64 pitch) +{ + return lv1_gpu_context_attribute(context_handle, + L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT, + ddr_offset, ioif_offset, sync_width, + pitch); +} + +static inline int lv1_gpu_fb_close(u64 context_handle) +{ + return lv1_gpu_context_attribute(context_handle, + L1GPU_CONTEXT_ATTRIBUTE_FB_CLOSE, 0, + 0, 0, 0); +} + +#endif /* _ASM_POWERPC_PS3GPU_H */ diff --git a/arch/powerpc/include/asm/ps3stor.h b/arch/powerpc/include/asm/ps3stor.h new file mode 100644 index 000000000..1d8279014 --- /dev/null +++ b/arch/powerpc/include/asm/ps3stor.h @@ -0,0 +1,59 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * PS3 Storage Devices + * + * Copyright (C) 2007 Sony Computer Entertainment Inc. + * Copyright 2007 Sony Corp. + */ + +#ifndef _ASM_POWERPC_PS3STOR_H_ +#define _ASM_POWERPC_PS3STOR_H_ + +#include <linux/interrupt.h> + +#include <asm/ps3.h> + + +struct ps3_storage_region { + unsigned int id; + u64 start; + u64 size; +}; + +struct ps3_storage_device { + struct ps3_system_bus_device sbd; + + struct ps3_dma_region dma_region; + unsigned int irq; + u64 blk_size; + + u64 tag; + u64 lv1_status; + struct completion done; + + unsigned long bounce_size; + void *bounce_buf; + u64 bounce_lpar; + dma_addr_t bounce_dma; + + unsigned int num_regions; + unsigned long accessible_regions; + unsigned int region_idx; /* first accessible region */ + struct ps3_storage_region regions[]; /* Must be last */ +}; + +static inline struct ps3_storage_device *to_ps3_storage_device(struct device *dev) +{ + return container_of(dev, struct ps3_storage_device, sbd.core); +} + +extern int ps3stor_setup(struct ps3_storage_device *dev, + irq_handler_t handler); +extern void ps3stor_teardown(struct ps3_storage_device *dev); +extern u64 ps3stor_read_write_sectors(struct ps3_storage_device *dev, u64 lpar, + u64 start_sector, u64 sectors, + int write); +extern u64 ps3stor_send_command(struct ps3_storage_device *dev, u64 cmd, + u64 arg1, u64 arg2, u64 arg3, u64 arg4); + +#endif /* _ASM_POWERPC_PS3STOR_H_ */ diff --git a/arch/powerpc/include/asm/pte-walk.h b/arch/powerpc/include/asm/pte-walk.h new file mode 100644 index 000000000..33fa5dd8e --- /dev/null +++ b/arch/powerpc/include/asm/pte-walk.h @@ -0,0 +1,59 @@ +#ifndef _ASM_POWERPC_PTE_WALK_H +#define _ASM_POWERPC_PTE_WALK_H + +#include <linux/sched.h> + +/* Don't use this directly */ +extern pte_t *__find_linux_pte(pgd_t *pgdir, unsigned long ea, + bool *is_thp, unsigned *hshift); + +static inline pte_t *find_linux_pte(pgd_t *pgdir, unsigned long ea, + bool *is_thp, unsigned *hshift) +{ + pte_t *pte; + + VM_WARN(!arch_irqs_disabled(), "%s called with irq enabled\n", __func__); + pte = __find_linux_pte(pgdir, ea, is_thp, hshift); + +#if defined(CONFIG_DEBUG_VM) && \ + !(defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)) + /* + * We should not find huge page if these configs are not enabled. + */ + if (hshift) + WARN_ON(*hshift); +#endif + return pte; +} + +static inline pte_t *find_init_mm_pte(unsigned long ea, unsigned *hshift) +{ + pgd_t *pgdir = init_mm.pgd; + return __find_linux_pte(pgdir, ea, NULL, hshift); +} +/* + * This is what we should always use. Any other lockless page table lookup needs + * careful audit against THP split. + */ +static inline pte_t *find_current_mm_pte(pgd_t *pgdir, unsigned long ea, + bool *is_thp, unsigned *hshift) +{ + pte_t *pte; + + VM_WARN(!arch_irqs_disabled(), "%s called with irq enabled\n", __func__); + VM_WARN(pgdir != current->mm->pgd, + "%s lock less page table lookup called on wrong mm\n", __func__); + pte = __find_linux_pte(pgdir, ea, is_thp, hshift); + +#if defined(CONFIG_DEBUG_VM) && \ + !(defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)) + /* + * We should not find huge page if these configs are not enabled. + */ + if (hshift) + WARN_ON(*hshift); +#endif + return pte; +} + +#endif /* _ASM_POWERPC_PTE_WALK_H */ diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h new file mode 100644 index 000000000..a7e7688f5 --- /dev/null +++ b/arch/powerpc/include/asm/ptrace.h @@ -0,0 +1,334 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2001 PPC64 Team, IBM Corp + * + * This struct defines the way the registers are stored on the + * kernel stack during a system call or other kernel entry. + * + * this should only contain volatile regs + * since we can keep non-volatile in the thread_struct + * should set this up when only volatiles are saved + * by intr code. + * + * Since this is going on the stack, *CARE MUST BE TAKEN* to insure + * that the overall structure is a multiple of 16 bytes in length. + * + * Note that the offsets of the fields in this struct correspond with + * the PT_* values below. This simplifies arch/powerpc/kernel/ptrace.c. + */ +#ifndef _ASM_POWERPC_PTRACE_H +#define _ASM_POWERPC_PTRACE_H + +#include <linux/err.h> +#include <uapi/asm/ptrace.h> +#include <asm/asm-const.h> + +#ifndef __ASSEMBLY__ +struct pt_regs +{ + union { + struct user_pt_regs user_regs; + struct { + unsigned long gpr[32]; + unsigned long nip; + unsigned long msr; + unsigned long orig_gpr3; + unsigned long ctr; + unsigned long link; + unsigned long xer; + unsigned long ccr; +#ifdef CONFIG_PPC64 + unsigned long softe; +#else + unsigned long mq; +#endif + unsigned long trap; + unsigned long dar; + unsigned long dsisr; + unsigned long result; + }; + }; + + union { + struct { +#ifdef CONFIG_PPC64 + unsigned long ppr; +#endif +#ifdef CONFIG_PPC_KUAP + unsigned long kuap; +#endif + }; + unsigned long __pad[2]; /* Maintain 16 byte interrupt stack alignment */ + }; +}; +#endif + + +#define STACK_FRAME_WITH_PT_REGS (STACK_FRAME_OVERHEAD + sizeof(struct pt_regs)) + +#ifdef __powerpc64__ + +/* + * Size of redzone that userspace is allowed to use below the stack + * pointer. This is 288 in the 64-bit big-endian ELF ABI, and 512 in + * the new ELFv2 little-endian ABI, so we allow the larger amount. + * + * For kernel code we allow a 288-byte redzone, in order to conserve + * kernel stack space; gcc currently only uses 288 bytes, and will + * hopefully allow explicit control of the redzone size in future. + */ +#define USER_REDZONE_SIZE 512 +#define KERNEL_REDZONE_SIZE 288 + +#define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */ +#define STACK_FRAME_LR_SAVE 2 /* Location of LR in stack frame */ +#define STACK_FRAME_REGS_MARKER ASM_CONST(0x7265677368657265) +#define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + \ + STACK_FRAME_OVERHEAD + KERNEL_REDZONE_SIZE) +#define STACK_FRAME_MARKER 12 + +#ifdef PPC64_ELF_ABI_v2 +#define STACK_FRAME_MIN_SIZE 32 +#else +#define STACK_FRAME_MIN_SIZE STACK_FRAME_OVERHEAD +#endif + +/* Size of dummy stack frame allocated when calling signal handler. */ +#define __SIGNAL_FRAMESIZE 128 +#define __SIGNAL_FRAMESIZE32 64 + +#else /* __powerpc64__ */ + +#define USER_REDZONE_SIZE 0 +#define KERNEL_REDZONE_SIZE 0 +#define STACK_FRAME_OVERHEAD 16 /* size of minimum stack frame */ +#define STACK_FRAME_LR_SAVE 1 /* Location of LR in stack frame */ +#define STACK_FRAME_REGS_MARKER ASM_CONST(0x72656773) +#define STACK_INT_FRAME_SIZE (sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD) +#define STACK_FRAME_MARKER 2 +#define STACK_FRAME_MIN_SIZE STACK_FRAME_OVERHEAD + +/* Size of stack frame allocated when calling signal handler. */ +#define __SIGNAL_FRAMESIZE 64 + +#endif /* __powerpc64__ */ + +#ifndef __ASSEMBLY__ + +static inline unsigned long instruction_pointer(struct pt_regs *regs) +{ + return regs->nip; +} + +static inline void instruction_pointer_set(struct pt_regs *regs, + unsigned long val) +{ + regs->nip = val; +} + +static inline unsigned long user_stack_pointer(struct pt_regs *regs) +{ + return regs->gpr[1]; +} + +static inline unsigned long frame_pointer(struct pt_regs *regs) +{ + return 0; +} + +#ifdef CONFIG_SMP +extern unsigned long profile_pc(struct pt_regs *regs); +#else +#define profile_pc(regs) instruction_pointer(regs) +#endif + +long do_syscall_trace_enter(struct pt_regs *regs); +void do_syscall_trace_leave(struct pt_regs *regs); + +#ifdef __powerpc64__ +#define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1) +#else +#define user_mode(regs) (((regs)->msr & MSR_PR) != 0) +#endif + +#define force_successful_syscall_return() \ + do { \ + set_thread_flag(TIF_NOERROR); \ + } while(0) + +struct task_struct; +extern int ptrace_get_reg(struct task_struct *task, int regno, + unsigned long *data); +extern int ptrace_put_reg(struct task_struct *task, int regno, + unsigned long data); + +#define current_pt_regs() \ + ((struct pt_regs *)((unsigned long)task_stack_page(current) + THREAD_SIZE) - 1) + +#ifdef __powerpc64__ +#ifdef CONFIG_PPC_BOOK3S +#define TRAP_FLAGS_MASK 0x10 +#define TRAP(regs) ((regs)->trap & ~TRAP_FLAGS_MASK) +#define FULL_REGS(regs) true +#define SET_FULL_REGS(regs) do { } while (0) +#else +#define TRAP_FLAGS_MASK 0x11 +#define TRAP(regs) ((regs)->trap & ~TRAP_FLAGS_MASK) +#define FULL_REGS(regs) (((regs)->trap & 1) == 0) +#define SET_FULL_REGS(regs) ((regs)->trap &= ~1) +#endif +#define CHECK_FULL_REGS(regs) BUG_ON(!FULL_REGS(regs)) +#define NV_REG_POISON 0xdeadbeefdeadbeefUL +#else +/* + * We use the least-significant bit of the trap field to indicate + * whether we have saved the full set of registers, or only a + * partial set. A 1 there means the partial set. + * On 4xx we use the next bit to indicate whether the exception + * is a critical exception (1 means it is). + */ +#define TRAP_FLAGS_MASK 0x1F +#define TRAP(regs) ((regs)->trap & ~TRAP_FLAGS_MASK) +#define FULL_REGS(regs) (((regs)->trap & 1) == 0) +#define SET_FULL_REGS(regs) ((regs)->trap &= ~1) +#define IS_CRITICAL_EXC(regs) (((regs)->trap & 2) != 0) +#define IS_MCHECK_EXC(regs) (((regs)->trap & 4) != 0) +#define IS_DEBUG_EXC(regs) (((regs)->trap & 8) != 0) +#define NV_REG_POISON 0xdeadbeef +#define CHECK_FULL_REGS(regs) \ +do { \ + if ((regs)->trap & 1) \ + printk(KERN_CRIT "%s: partial register set\n", __func__); \ +} while (0) +#endif /* __powerpc64__ */ + +static inline void set_trap(struct pt_regs *regs, unsigned long val) +{ + regs->trap = (regs->trap & TRAP_FLAGS_MASK) | (val & ~TRAP_FLAGS_MASK); +} + +static inline bool trap_is_scv(struct pt_regs *regs) +{ + return (IS_ENABLED(CONFIG_PPC_BOOK3S_64) && TRAP(regs) == 0x3000); +} + +static inline bool trap_is_syscall(struct pt_regs *regs) +{ + return (trap_is_scv(regs) || TRAP(regs) == 0xc00); +} + +static inline bool trap_norestart(struct pt_regs *regs) +{ + return regs->trap & 0x10; +} + +static inline void set_trap_norestart(struct pt_regs *regs) +{ + regs->trap |= 0x10; +} + +#define kernel_stack_pointer(regs) ((regs)->gpr[1]) +static inline int is_syscall_success(struct pt_regs *regs) +{ + if (trap_is_scv(regs)) + return !IS_ERR_VALUE((unsigned long)regs->gpr[3]); + else + return !(regs->ccr & 0x10000000); +} + +static inline long regs_return_value(struct pt_regs *regs) +{ + if (trap_is_scv(regs)) + return regs->gpr[3]; + + if (is_syscall_success(regs)) + return regs->gpr[3]; + else + return -regs->gpr[3]; +} + +static inline void regs_set_return_value(struct pt_regs *regs, unsigned long rc) +{ + regs->gpr[3] = rc; +} + +#define arch_has_single_step() (1) +#define arch_has_block_step() (true) +#define ARCH_HAS_USER_SINGLE_STEP_REPORT + +/* + * kprobe-based event tracer support + */ + +#include <linux/stddef.h> +#include <linux/thread_info.h> +extern int regs_query_register_offset(const char *name); +extern const char *regs_query_register_name(unsigned int offset); +#define MAX_REG_OFFSET (offsetof(struct pt_regs, dsisr)) + +/** + * regs_get_register() - get register value from its offset + * @regs: pt_regs from which register value is gotten + * @offset: offset number of the register. + * + * regs_get_register returns the value of a register whose offset from @regs. + * The @offset is the offset of the register in struct pt_regs. + * If @offset is bigger than MAX_REG_OFFSET, this returns 0. + */ +static inline unsigned long regs_get_register(struct pt_regs *regs, + unsigned int offset) +{ + if (unlikely(offset > MAX_REG_OFFSET)) + return 0; + return *(unsigned long *)((unsigned long)regs + offset); +} + +/** + * regs_within_kernel_stack() - check the address in the stack + * @regs: pt_regs which contains kernel stack pointer. + * @addr: address which is checked. + * + * regs_within_kernel_stack() checks @addr is within the kernel stack page(s). + * If @addr is within the kernel stack, it returns true. If not, returns false. + */ + +static inline bool regs_within_kernel_stack(struct pt_regs *regs, + unsigned long addr) +{ + return ((addr & ~(THREAD_SIZE - 1)) == + (kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1))); +} + +/** + * regs_get_kernel_stack_nth() - get Nth entry of the stack + * @regs: pt_regs which contains kernel stack pointer. + * @n: stack entry number. + * + * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which + * is specified by @regs. If the @n th entry is NOT in the kernel stack, + * this returns 0. + */ +static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, + unsigned int n) +{ + unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs); + addr += n; + if (regs_within_kernel_stack(regs, (unsigned long)addr)) + return *addr; + else + return 0; +} + +#endif /* __ASSEMBLY__ */ + +#ifndef __powerpc64__ +/* We need PT_SOFTE defined at all time to avoid #ifdefs */ +#define PT_SOFTE PT_MQ +#else /* __powerpc64__ */ +#define PT_FPSCR32 (PT_FPR0 + 2*32 + 1) /* each FP reg occupies 2 32-bit userspace slots */ +#define PT_VR0_32 164 /* each Vector reg occupies 4 slots in 32-bit */ +#define PT_VSCR_32 (PT_VR0 + 32*4 + 3) +#define PT_VRSAVE_32 (PT_VR0 + 33*4) +#define PT_VSR0_32 300 /* each VSR reg occupies 4 slots in 32-bit */ +#endif /* __powerpc64__ */ +#endif /* _ASM_POWERPC_PTRACE_H */ diff --git a/arch/powerpc/include/asm/qspinlock.h b/arch/powerpc/include/asm/qspinlock.h new file mode 100644 index 000000000..b752d3451 --- /dev/null +++ b/arch/powerpc/include/asm/qspinlock.h @@ -0,0 +1,91 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_QSPINLOCK_H +#define _ASM_POWERPC_QSPINLOCK_H + +#include <asm-generic/qspinlock_types.h> +#include <asm/paravirt.h> + +#define _Q_PENDING_LOOPS (1 << 9) /* not tuned */ + +#ifdef CONFIG_PARAVIRT_SPINLOCKS +extern void native_queued_spin_lock_slowpath(struct qspinlock *lock, u32 val); +extern void __pv_queued_spin_lock_slowpath(struct qspinlock *lock, u32 val); +extern void __pv_queued_spin_unlock(struct qspinlock *lock); + +static __always_inline void queued_spin_lock_slowpath(struct qspinlock *lock, u32 val) +{ + if (!is_shared_processor()) + native_queued_spin_lock_slowpath(lock, val); + else + __pv_queued_spin_lock_slowpath(lock, val); +} + +#define queued_spin_unlock queued_spin_unlock +static inline void queued_spin_unlock(struct qspinlock *lock) +{ + if (!is_shared_processor()) + smp_store_release(&lock->locked, 0); + else + __pv_queued_spin_unlock(lock); +} + +#else +extern void queued_spin_lock_slowpath(struct qspinlock *lock, u32 val); +#endif + +static __always_inline void queued_spin_lock(struct qspinlock *lock) +{ + u32 val = 0; + + if (likely(atomic_try_cmpxchg_lock(&lock->val, &val, _Q_LOCKED_VAL))) + return; + + queued_spin_lock_slowpath(lock, val); +} +#define queued_spin_lock queued_spin_lock + +#define smp_mb__after_spinlock() smp_mb() + +static __always_inline int queued_spin_is_locked(struct qspinlock *lock) +{ + /* + * This barrier was added to simple spinlocks by commit 51d7d5205d338, + * but it should now be possible to remove it, asm arm64 has done with + * commit c6f5d02b6a0f. + */ + smp_mb(); + return atomic_read(&lock->val); +} +#define queued_spin_is_locked queued_spin_is_locked + +#ifdef CONFIG_PARAVIRT_SPINLOCKS +#define SPIN_THRESHOLD (1<<15) /* not tuned */ + +static __always_inline void pv_wait(u8 *ptr, u8 val) +{ + if (*ptr != val) + return; + yield_to_any(); + /* + * We could pass in a CPU here if waiting in the queue and yield to + * the previous CPU in the queue. + */ +} + +static __always_inline void pv_kick(int cpu) +{ + prod_cpu(cpu); +} + +extern void __pv_init_lock_hash(void); + +static inline void pv_spinlocks_init(void) +{ + __pv_init_lock_hash(); +} + +#endif + +#include <asm-generic/qspinlock.h> + +#endif /* _ASM_POWERPC_QSPINLOCK_H */ diff --git a/arch/powerpc/include/asm/qspinlock_paravirt.h b/arch/powerpc/include/asm/qspinlock_paravirt.h new file mode 100644 index 000000000..6b60e7736 --- /dev/null +++ b/arch/powerpc/include/asm/qspinlock_paravirt.h @@ -0,0 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_QSPINLOCK_PARAVIRT_H +#define _ASM_POWERPC_QSPINLOCK_PARAVIRT_H + +EXPORT_SYMBOL(__pv_queued_spin_unlock); + +#endif /* _ASM_POWERPC_QSPINLOCK_PARAVIRT_H */ diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h new file mode 100644 index 000000000..6afb14b6b --- /dev/null +++ b/arch/powerpc/include/asm/reg.h @@ -0,0 +1,1490 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Contains the definition of registers common to all PowerPC variants. + * If a register definition has been changed in a different PowerPC + * variant, we will case it in #ifndef XXX ... #endif, and have the + * number used in the Programming Environments Manual For 32-Bit + * Implementations of the PowerPC Architecture (a.k.a. Green Book) here. + */ + +#ifndef _ASM_POWERPC_REG_H +#define _ASM_POWERPC_REG_H +#ifdef __KERNEL__ + +#include <linux/stringify.h> +#include <linux/const.h> +#include <asm/cputable.h> +#include <asm/asm-const.h> +#include <asm/feature-fixups.h> + +/* Pickup Book E specific registers. */ +#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) +#include <asm/reg_booke.h> +#endif /* CONFIG_BOOKE || CONFIG_40x */ + +#ifdef CONFIG_FSL_EMB_PERFMON +#include <asm/reg_fsl_emb.h> +#endif + +#include <asm/reg_8xx.h> + +#define MSR_SF_LG 63 /* Enable 64 bit mode */ +#define MSR_ISF_LG 61 /* Interrupt 64b mode valid on 630 */ +#define MSR_HV_LG 60 /* Hypervisor state */ +#define MSR_TS_T_LG 34 /* Trans Mem state: Transactional */ +#define MSR_TS_S_LG 33 /* Trans Mem state: Suspended */ +#define MSR_TS_LG 33 /* Trans Mem state (2 bits) */ +#define MSR_TM_LG 32 /* Trans Mem Available */ +#define MSR_VEC_LG 25 /* Enable AltiVec */ +#define MSR_VSX_LG 23 /* Enable VSX */ +#define MSR_S_LG 22 /* Secure state */ +#define MSR_POW_LG 18 /* Enable Power Management */ +#define MSR_WE_LG 18 /* Wait State Enable */ +#define MSR_TGPR_LG 17 /* TLB Update registers in use */ +#define MSR_CE_LG 17 /* Critical Interrupt Enable */ +#define MSR_ILE_LG 16 /* Interrupt Little Endian */ +#define MSR_EE_LG 15 /* External Interrupt Enable */ +#define MSR_PR_LG 14 /* Problem State / Privilege Level */ +#define MSR_FP_LG 13 /* Floating Point enable */ +#define MSR_ME_LG 12 /* Machine Check Enable */ +#define MSR_FE0_LG 11 /* Floating Exception mode 0 */ +#define MSR_SE_LG 10 /* Single Step */ +#define MSR_BE_LG 9 /* Branch Trace */ +#define MSR_DE_LG 9 /* Debug Exception Enable */ +#define MSR_FE1_LG 8 /* Floating Exception mode 1 */ +#define MSR_IP_LG 6 /* Exception prefix 0x000/0xFFF */ +#define MSR_IR_LG 5 /* Instruction Relocate */ +#define MSR_DR_LG 4 /* Data Relocate */ +#define MSR_PE_LG 3 /* Protection Enable */ +#define MSR_PX_LG 2 /* Protection Exclusive Mode */ +#define MSR_PMM_LG 2 /* Performance monitor */ +#define MSR_RI_LG 1 /* Recoverable Exception */ +#define MSR_LE_LG 0 /* Little Endian */ + +#ifdef __ASSEMBLY__ +#define __MASK(X) (1<<(X)) +#else +#define __MASK(X) (1UL<<(X)) +#endif + +#ifdef CONFIG_PPC64 +#define MSR_SF __MASK(MSR_SF_LG) /* Enable 64 bit mode */ +#define MSR_ISF __MASK(MSR_ISF_LG) /* Interrupt 64b mode valid on 630 */ +#define MSR_HV __MASK(MSR_HV_LG) /* Hypervisor state */ +#define MSR_S __MASK(MSR_S_LG) /* Secure state */ +#else +/* so tests for these bits fail on 32-bit */ +#define MSR_SF 0 +#define MSR_ISF 0 +#define MSR_HV 0 +#define MSR_S 0 +#endif + +/* + * To be used in shared book E/book S, this avoids needing to worry about + * book S/book E in shared code + */ +#ifndef MSR_SPE +#define MSR_SPE 0 +#endif + +#define MSR_VEC __MASK(MSR_VEC_LG) /* Enable AltiVec */ +#define MSR_VSX __MASK(MSR_VSX_LG) /* Enable VSX */ +#define MSR_POW __MASK(MSR_POW_LG) /* Enable Power Management */ +#define MSR_WE __MASK(MSR_WE_LG) /* Wait State Enable */ +#define MSR_TGPR __MASK(MSR_TGPR_LG) /* TLB Update registers in use */ +#define MSR_CE __MASK(MSR_CE_LG) /* Critical Interrupt Enable */ +#define MSR_ILE __MASK(MSR_ILE_LG) /* Interrupt Little Endian */ +#define MSR_EE __MASK(MSR_EE_LG) /* External Interrupt Enable */ +#define MSR_PR __MASK(MSR_PR_LG) /* Problem State / Privilege Level */ +#define MSR_FP __MASK(MSR_FP_LG) /* Floating Point enable */ +#define MSR_ME __MASK(MSR_ME_LG) /* Machine Check Enable */ +#define MSR_FE0 __MASK(MSR_FE0_LG) /* Floating Exception mode 0 */ +#define MSR_SE __MASK(MSR_SE_LG) /* Single Step */ +#define MSR_BE __MASK(MSR_BE_LG) /* Branch Trace */ +#define MSR_DE __MASK(MSR_DE_LG) /* Debug Exception Enable */ +#define MSR_FE1 __MASK(MSR_FE1_LG) /* Floating Exception mode 1 */ +#define MSR_IP __MASK(MSR_IP_LG) /* Exception prefix 0x000/0xFFF */ +#define MSR_IR __MASK(MSR_IR_LG) /* Instruction Relocate */ +#define MSR_DR __MASK(MSR_DR_LG) /* Data Relocate */ +#define MSR_PE __MASK(MSR_PE_LG) /* Protection Enable */ +#define MSR_PX __MASK(MSR_PX_LG) /* Protection Exclusive Mode */ +#ifndef MSR_PMM +#define MSR_PMM __MASK(MSR_PMM_LG) /* Performance monitor */ +#endif +#define MSR_RI __MASK(MSR_RI_LG) /* Recoverable Exception */ +#define MSR_LE __MASK(MSR_LE_LG) /* Little Endian */ + +#define MSR_TM __MASK(MSR_TM_LG) /* Transactional Mem Available */ +#define MSR_TS_N 0 /* Non-transactional */ +#define MSR_TS_S __MASK(MSR_TS_S_LG) /* Transaction Suspended */ +#define MSR_TS_T __MASK(MSR_TS_T_LG) /* Transaction Transactional */ +#define MSR_TS_MASK (MSR_TS_T | MSR_TS_S) /* Transaction State bits */ +#define MSR_TM_RESV(x) (((x) & MSR_TS_MASK) == MSR_TS_MASK) /* Reserved */ +#define MSR_TM_TRANSACTIONAL(x) (((x) & MSR_TS_MASK) == MSR_TS_T) +#define MSR_TM_SUSPENDED(x) (((x) & MSR_TS_MASK) == MSR_TS_S) + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +#define MSR_TM_ACTIVE(x) (((x) & MSR_TS_MASK) != 0) /* Transaction active? */ +#else +#define MSR_TM_ACTIVE(x) 0 +#endif + +#if defined(CONFIG_PPC_BOOK3S_64) +#define MSR_64BIT MSR_SF + +/* Server variant */ +#define __MSR (MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV) +#ifdef __BIG_ENDIAN__ +#define MSR_ __MSR +#define MSR_IDLE (MSR_ME | MSR_SF | MSR_HV) +#else +#define MSR_ (__MSR | MSR_LE) +#define MSR_IDLE (MSR_ME | MSR_SF | MSR_HV | MSR_LE) +#endif +#define MSR_KERNEL (MSR_ | MSR_64BIT) +#define MSR_USER32 (MSR_ | MSR_PR | MSR_EE) +#define MSR_USER64 (MSR_USER32 | MSR_64BIT) +#elif defined(CONFIG_PPC_BOOK3S_32) || defined(CONFIG_PPC_8xx) +/* Default MSR for kernel mode. */ +#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR) +#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) +#endif + +#ifndef MSR_64BIT +#define MSR_64BIT 0 +#endif + +/* Condition Register related */ +#define CR0_SHIFT 28 +#define CR0_MASK 0xF +#define CR0_TBEGIN_FAILURE (0x2 << 28) /* 0b0010 */ + + +/* Power Management - Processor Stop Status and Control Register Fields */ +#define PSSCR_RL_MASK 0x0000000F /* Requested Level */ +#define PSSCR_MTL_MASK 0x000000F0 /* Maximum Transition Level */ +#define PSSCR_TR_MASK 0x00000300 /* Transition State */ +#define PSSCR_PSLL_MASK 0x000F0000 /* Power-Saving Level Limit */ +#define PSSCR_EC 0x00100000 /* Exit Criterion */ +#define PSSCR_ESL 0x00200000 /* Enable State Loss */ +#define PSSCR_SD 0x00400000 /* Status Disable */ +#define PSSCR_PLS 0xf000000000000000 /* Power-saving Level Status */ +#define PSSCR_PLS_SHIFT 60 +#define PSSCR_GUEST_VIS 0xf0000000000003ffUL /* Guest-visible PSSCR fields */ +#define PSSCR_FAKE_SUSPEND 0x00000400 /* Fake-suspend bit (P9 DD2.2) */ +#define PSSCR_FAKE_SUSPEND_LG 10 /* Fake-suspend bit position */ + +/* Floating Point Status and Control Register (FPSCR) Fields */ +#define FPSCR_FX 0x80000000 /* FPU exception summary */ +#define FPSCR_FEX 0x40000000 /* FPU enabled exception summary */ +#define FPSCR_VX 0x20000000 /* Invalid operation summary */ +#define FPSCR_OX 0x10000000 /* Overflow exception summary */ +#define FPSCR_UX 0x08000000 /* Underflow exception summary */ +#define FPSCR_ZX 0x04000000 /* Zero-divide exception summary */ +#define FPSCR_XX 0x02000000 /* Inexact exception summary */ +#define FPSCR_VXSNAN 0x01000000 /* Invalid op for SNaN */ +#define FPSCR_VXISI 0x00800000 /* Invalid op for Inv - Inv */ +#define FPSCR_VXIDI 0x00400000 /* Invalid op for Inv / Inv */ +#define FPSCR_VXZDZ 0x00200000 /* Invalid op for Zero / Zero */ +#define FPSCR_VXIMZ 0x00100000 /* Invalid op for Inv * Zero */ +#define FPSCR_VXVC 0x00080000 /* Invalid op for Compare */ +#define FPSCR_FR 0x00040000 /* Fraction rounded */ +#define FPSCR_FI 0x00020000 /* Fraction inexact */ +#define FPSCR_FPRF 0x0001f000 /* FPU Result Flags */ +#define FPSCR_FPCC 0x0000f000 /* FPU Condition Codes */ +#define FPSCR_VXSOFT 0x00000400 /* Invalid op for software request */ +#define FPSCR_VXSQRT 0x00000200 /* Invalid op for square root */ +#define FPSCR_VXCVI 0x00000100 /* Invalid op for integer convert */ +#define FPSCR_VE 0x00000080 /* Invalid op exception enable */ +#define FPSCR_OE 0x00000040 /* IEEE overflow exception enable */ +#define FPSCR_UE 0x00000020 /* IEEE underflow exception enable */ +#define FPSCR_ZE 0x00000010 /* IEEE zero divide exception enable */ +#define FPSCR_XE 0x00000008 /* FP inexact exception enable */ +#define FPSCR_NI 0x00000004 /* FPU non IEEE-Mode */ +#define FPSCR_RN 0x00000003 /* FPU rounding control */ + +/* Bit definitions for SPEFSCR. */ +#define SPEFSCR_SOVH 0x80000000 /* Summary integer overflow high */ +#define SPEFSCR_OVH 0x40000000 /* Integer overflow high */ +#define SPEFSCR_FGH 0x20000000 /* Embedded FP guard bit high */ +#define SPEFSCR_FXH 0x10000000 /* Embedded FP sticky bit high */ +#define SPEFSCR_FINVH 0x08000000 /* Embedded FP invalid operation high */ +#define SPEFSCR_FDBZH 0x04000000 /* Embedded FP div by zero high */ +#define SPEFSCR_FUNFH 0x02000000 /* Embedded FP underflow high */ +#define SPEFSCR_FOVFH 0x01000000 /* Embedded FP overflow high */ +#define SPEFSCR_FINXS 0x00200000 /* Embedded FP inexact sticky */ +#define SPEFSCR_FINVS 0x00100000 /* Embedded FP invalid op. sticky */ +#define SPEFSCR_FDBZS 0x00080000 /* Embedded FP div by zero sticky */ +#define SPEFSCR_FUNFS 0x00040000 /* Embedded FP underflow sticky */ +#define SPEFSCR_FOVFS 0x00020000 /* Embedded FP overflow sticky */ +#define SPEFSCR_MODE 0x00010000 /* Embedded FP mode */ +#define SPEFSCR_SOV 0x00008000 /* Integer summary overflow */ +#define SPEFSCR_OV 0x00004000 /* Integer overflow */ +#define SPEFSCR_FG 0x00002000 /* Embedded FP guard bit */ +#define SPEFSCR_FX 0x00001000 /* Embedded FP sticky bit */ +#define SPEFSCR_FINV 0x00000800 /* Embedded FP invalid operation */ +#define SPEFSCR_FDBZ 0x00000400 /* Embedded FP div by zero */ +#define SPEFSCR_FUNF 0x00000200 /* Embedded FP underflow */ +#define SPEFSCR_FOVF 0x00000100 /* Embedded FP overflow */ +#define SPEFSCR_FINXE 0x00000040 /* Embedded FP inexact enable */ +#define SPEFSCR_FINVE 0x00000020 /* Embedded FP invalid op. enable */ +#define SPEFSCR_FDBZE 0x00000010 /* Embedded FP div by zero enable */ +#define SPEFSCR_FUNFE 0x00000008 /* Embedded FP underflow enable */ +#define SPEFSCR_FOVFE 0x00000004 /* Embedded FP overflow enable */ +#define SPEFSCR_FRMC 0x00000003 /* Embedded FP rounding mode control */ + +/* Special Purpose Registers (SPRNs)*/ + +#ifdef CONFIG_40x +#define SPRN_PID 0x3B1 /* Process ID */ +#else +#define SPRN_PID 0x030 /* Process ID */ +#ifdef CONFIG_BOOKE +#define SPRN_PID0 SPRN_PID/* Process ID Register 0 */ +#endif +#endif + +#define SPRN_CTR 0x009 /* Count Register */ +#define SPRN_DSCR 0x11 +#define SPRN_CFAR 0x1c /* Come From Address Register */ +#define SPRN_AMR 0x1d /* Authority Mask Register */ +#define SPRN_UAMOR 0x9d /* User Authority Mask Override Register */ +#define SPRN_AMOR 0x15d /* Authority Mask Override Register */ +#define SPRN_ACOP 0x1F /* Available Coprocessor Register */ +#define SPRN_TFIAR 0x81 /* Transaction Failure Inst Addr */ +#define SPRN_TEXASR 0x82 /* Transaction EXception & Summary */ +#define SPRN_TEXASRU 0x83 /* '' '' '' Upper 32 */ + +#define TEXASR_FC_LG (63 - 7) /* Failure Code */ +#define TEXASR_AB_LG (63 - 31) /* Abort */ +#define TEXASR_SU_LG (63 - 32) /* Suspend */ +#define TEXASR_HV_LG (63 - 34) /* Hypervisor state*/ +#define TEXASR_PR_LG (63 - 35) /* Privilege level */ +#define TEXASR_FS_LG (63 - 36) /* failure summary */ +#define TEXASR_EX_LG (63 - 37) /* TFIAR exact bit */ +#define TEXASR_ROT_LG (63 - 38) /* ROT bit */ + +#define TEXASR_ABORT __MASK(TEXASR_AB_LG) /* terminated by tabort or treclaim */ +#define TEXASR_SUSP __MASK(TEXASR_SU_LG) /* tx failed in suspended state */ +#define TEXASR_HV __MASK(TEXASR_HV_LG) /* MSR[HV] when failure occurred */ +#define TEXASR_PR __MASK(TEXASR_PR_LG) /* MSR[PR] when failure occurred */ +#define TEXASR_FS __MASK(TEXASR_FS_LG) /* TEXASR Failure Summary */ +#define TEXASR_EXACT __MASK(TEXASR_EX_LG) /* TFIAR value is exact */ +#define TEXASR_ROT __MASK(TEXASR_ROT_LG) +#define TEXASR_FC (ASM_CONST(0xFF) << TEXASR_FC_LG) + +#define SPRN_TFHAR 0x80 /* Transaction Failure Handler Addr */ + +#define SPRN_TIDR 144 /* Thread ID register */ +#define SPRN_CTRLF 0x088 +#define SPRN_CTRLT 0x098 +#define CTRL_CT 0xc0000000 /* current thread */ +#define CTRL_CT0 0x80000000 /* thread 0 */ +#define CTRL_CT1 0x40000000 /* thread 1 */ +#define CTRL_TE 0x00c00000 /* thread enable */ +#define CTRL_RUNLATCH 0x1 +#define SPRN_DAWR0 0xB4 +#define SPRN_DAWR1 0xB5 +#define SPRN_RPR 0xBA /* Relative Priority Register */ +#define SPRN_CIABR 0xBB +#define CIABR_PRIV 0x3 +#define CIABR_PRIV_USER 1 +#define CIABR_PRIV_SUPER 2 +#define CIABR_PRIV_HYPER 3 +#define SPRN_DAWRX0 0xBC +#define SPRN_DAWRX1 0xBD +#define DAWRX_USER __MASK(0) +#define DAWRX_KERNEL __MASK(1) +#define DAWRX_HYP __MASK(2) +#define DAWRX_WTI __MASK(3) +#define DAWRX_WT __MASK(4) +#define DAWRX_DR __MASK(5) +#define DAWRX_DW __MASK(6) +#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */ +#define SPRN_DABR2 0x13D /* e300 */ +#define SPRN_DABRX 0x3F7 /* Data Address Breakpoint Register Extension */ +#define DABRX_USER __MASK(0) +#define DABRX_KERNEL __MASK(1) +#define DABRX_HYP __MASK(2) +#define DABRX_BTI __MASK(3) +#define DABRX_ALL (DABRX_BTI | DABRX_HYP | DABRX_KERNEL | DABRX_USER) +#define SPRN_DAR 0x013 /* Data Address Register */ +#define SPRN_DBCR 0x136 /* e300 Data Breakpoint Control Reg */ +#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */ +#define DSISR_BAD_DIRECT_ST 0x80000000 /* Obsolete: Direct store error */ +#define DSISR_NOHPTE 0x40000000 /* no translation found */ +#define DSISR_ATTR_CONFLICT 0x20000000 /* P9: Process vs. Partition attr */ +#define DSISR_NOEXEC_OR_G 0x10000000 /* Alias of SRR1 bit, see below */ +#define DSISR_PROTFAULT 0x08000000 /* protection fault */ +#define DSISR_BADACCESS 0x04000000 /* bad access to CI or G */ +#define DSISR_ISSTORE 0x02000000 /* access was a store */ +#define DSISR_DABRMATCH 0x00400000 /* hit data breakpoint */ +#define DSISR_NOSEGMENT 0x00200000 /* STAB miss (unsupported) */ +#define DSISR_KEYFAULT 0x00200000 /* Storage Key fault */ +#define DSISR_BAD_EXT_CTRL 0x00100000 /* Obsolete: External ctrl error */ +#define DSISR_UNSUPP_MMU 0x00080000 /* P9: Unsupported MMU config */ +#define DSISR_SET_RC 0x00040000 /* P9: Failed setting of R/C bits */ +#define DSISR_PRTABLE_FAULT 0x00020000 /* P9: Fault on process table */ +#define DSISR_ICSWX_NO_CT 0x00004000 /* P7: icswx unavailable cp type */ +#define DSISR_BAD_COPYPASTE 0x00000008 /* P9: Copy/Paste on wrong memtype */ +#define DSISR_BAD_AMO 0x00000004 /* P9: Incorrect AMO opcode */ +#define DSISR_BAD_CI_LDST 0x00000002 /* P8: Bad HV CI load/store */ + +/* + * DSISR_NOEXEC_OR_G doesn't actually exist. This bit is always + * 0 on DSIs. However, on ISIs, the corresponding bit in SRR1 + * indicates an attempt at executing from a no-execute PTE + * or segment or from a guarded page. + * + * We add a definition here for completeness as we alias + * DSISR and SRR1 in do_page_fault. + */ + +/* + * DSISR bits that are treated as a fault. Any bit set + * here will skip hash_page, and cause do_page_fault to + * trigger a SIGBUS or SIGSEGV: + */ +#define DSISR_BAD_FAULT_32S (DSISR_BAD_DIRECT_ST | \ + DSISR_BADACCESS | \ + DSISR_BAD_EXT_CTRL) +#define DSISR_BAD_FAULT_64S (DSISR_BAD_FAULT_32S | \ + DSISR_ATTR_CONFLICT | \ + DSISR_UNSUPP_MMU | \ + DSISR_PRTABLE_FAULT | \ + DSISR_ICSWX_NO_CT | \ + DSISR_BAD_COPYPASTE | \ + DSISR_BAD_AMO | \ + DSISR_BAD_CI_LDST) +/* + * These bits are equivalent in SRR1 and DSISR for 0x400 + * instruction access interrupts on Book3S + */ +#define DSISR_SRR1_MATCH_32S (DSISR_NOHPTE | \ + DSISR_NOEXEC_OR_G | \ + DSISR_PROTFAULT) +#define DSISR_SRR1_MATCH_64S (DSISR_SRR1_MATCH_32S | \ + DSISR_KEYFAULT | \ + DSISR_UNSUPP_MMU | \ + DSISR_SET_RC | \ + DSISR_PRTABLE_FAULT) + +#define SPRN_TBRL 0x10C /* Time Base Read Lower Register (user, R/O) */ +#define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */ +#define SPRN_CIR 0x11B /* Chip Information Register (hyper, R/0) */ +#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */ +#define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */ +#define SPRN_TBU40 0x11E /* Timebase upper 40 bits (hyper, R/W) */ +#define SPRN_SPURR 0x134 /* Scaled PURR */ +#define SPRN_HSPRG0 0x130 /* Hypervisor Scratch 0 */ +#define SPRN_HSPRG1 0x131 /* Hypervisor Scratch 1 */ +#define SPRN_HDSISR 0x132 +#define SPRN_HDAR 0x133 +#define SPRN_HDEC 0x136 /* Hypervisor Decrementer */ +#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */ +#define SPRN_RMOR 0x138 /* Real mode offset register */ +#define SPRN_HRMOR 0x139 /* Real mode offset register */ +#define SPRN_HSRR0 0x13A /* Hypervisor Save/Restore 0 */ +#define SPRN_HSRR1 0x13B /* Hypervisor Save/Restore 1 */ +#define SPRN_ASDR 0x330 /* Access segment descriptor register */ +#define SPRN_IC 0x350 /* Virtual Instruction Count */ +#define SPRN_VTB 0x351 /* Virtual Time Base */ +#define SPRN_LDBAR 0x352 /* LD Base Address Register */ +#define SPRN_PMICR 0x354 /* Power Management Idle Control Reg */ +#define SPRN_PMSR 0x355 /* Power Management Status Reg */ +#define SPRN_PMMAR 0x356 /* Power Management Memory Activity Register */ +#define SPRN_PSSCR 0x357 /* Processor Stop Status and Control Register (ISA 3.0) */ +#define SPRN_PSSCR_PR 0x337 /* PSSCR ISA 3.0, privileged mode access */ +#define SPRN_PMCR 0x374 /* Power Management Control Register */ +#define SPRN_RWMR 0x375 /* Region-Weighting Mode Register */ + +/* HFSCR and FSCR bit numbers are the same */ +#define FSCR_PREFIX_LG 13 /* Enable Prefix Instructions */ +#define FSCR_SCV_LG 12 /* Enable System Call Vectored */ +#define FSCR_MSGP_LG 10 /* Enable MSGP */ +#define FSCR_TAR_LG 8 /* Enable Target Address Register */ +#define FSCR_EBB_LG 7 /* Enable Event Based Branching */ +#define FSCR_TM_LG 5 /* Enable Transactional Memory */ +#define FSCR_BHRB_LG 4 /* Enable Branch History Rolling Buffer*/ +#define FSCR_PM_LG 3 /* Enable prob/priv access to PMU SPRs */ +#define FSCR_DSCR_LG 2 /* Enable Data Stream Control Register */ +#define FSCR_VECVSX_LG 1 /* Enable VMX/VSX */ +#define FSCR_FP_LG 0 /* Enable Floating Point */ +#define SPRN_FSCR 0x099 /* Facility Status & Control Register */ +#define FSCR_PREFIX __MASK(FSCR_PREFIX_LG) +#define FSCR_SCV __MASK(FSCR_SCV_LG) +#define FSCR_TAR __MASK(FSCR_TAR_LG) +#define FSCR_EBB __MASK(FSCR_EBB_LG) +#define FSCR_DSCR __MASK(FSCR_DSCR_LG) +#define SPRN_HFSCR 0xbe /* HV=1 Facility Status & Control Register */ +#define HFSCR_PREFIX __MASK(FSCR_PREFIX_LG) +#define HFSCR_MSGP __MASK(FSCR_MSGP_LG) +#define HFSCR_TAR __MASK(FSCR_TAR_LG) +#define HFSCR_EBB __MASK(FSCR_EBB_LG) +#define HFSCR_TM __MASK(FSCR_TM_LG) +#define HFSCR_PM __MASK(FSCR_PM_LG) +#define HFSCR_BHRB __MASK(FSCR_BHRB_LG) +#define HFSCR_DSCR __MASK(FSCR_DSCR_LG) +#define HFSCR_VECVSX __MASK(FSCR_VECVSX_LG) +#define HFSCR_FP __MASK(FSCR_FP_LG) +#define HFSCR_INTR_CAUSE (ASM_CONST(0xFF) << 56) /* interrupt cause */ +#define SPRN_TAR 0x32f /* Target Address Register */ +#define SPRN_LPCR 0x13E /* LPAR Control Register */ +#define LPCR_VPM0 ASM_CONST(0x8000000000000000) +#define LPCR_VPM1 ASM_CONST(0x4000000000000000) +#define LPCR_ISL ASM_CONST(0x2000000000000000) +#define LPCR_VC_SH 61 +#define LPCR_DPFD_SH 52 +#define LPCR_DPFD (ASM_CONST(7) << LPCR_DPFD_SH) +#define LPCR_VRMASD_SH 47 +#define LPCR_VRMASD (ASM_CONST(0x1f) << LPCR_VRMASD_SH) +#define LPCR_VRMA_L ASM_CONST(0x0008000000000000) +#define LPCR_VRMA_LP0 ASM_CONST(0x0001000000000000) +#define LPCR_VRMA_LP1 ASM_CONST(0x0000800000000000) +#define LPCR_RMLS 0x1C000000 /* Implementation dependent RMO limit sel */ +#define LPCR_RMLS_SH 26 +#define LPCR_HAIL ASM_CONST(0x0000000004000000) /* HV AIL (ISAv3.1) */ +#define LPCR_ILE ASM_CONST(0x0000000002000000) /* !HV irqs set MSR:LE */ +#define LPCR_AIL ASM_CONST(0x0000000001800000) /* Alternate interrupt location */ +#define LPCR_AIL_0 ASM_CONST(0x0000000000000000) /* MMU off exception offset 0x0 */ +#define LPCR_AIL_3 ASM_CONST(0x0000000001800000) /* MMU on exception offset 0xc00...4xxx */ +#define LPCR_ONL ASM_CONST(0x0000000000040000) /* online - PURR/SPURR count */ +#define LPCR_LD ASM_CONST(0x0000000000020000) /* large decremeter */ +#define LPCR_PECE ASM_CONST(0x000000000001f000) /* powersave exit cause enable */ +#define LPCR_PECEDP ASM_CONST(0x0000000000010000) /* directed priv dbells cause exit */ +#define LPCR_PECEDH ASM_CONST(0x0000000000008000) /* directed hyp dbells cause exit */ +#define LPCR_PECE0 ASM_CONST(0x0000000000004000) /* ext. exceptions can cause exit */ +#define LPCR_PECE1 ASM_CONST(0x0000000000002000) /* decrementer can cause exit */ +#define LPCR_PECE2 ASM_CONST(0x0000000000001000) /* machine check etc can cause exit */ +#define LPCR_PECE_HVEE ASM_CONST(0x0000400000000000) /* P9 Wakeup on HV interrupts */ +#define LPCR_MER ASM_CONST(0x0000000000000800) /* Mediated External Exception */ +#define LPCR_MER_SH 11 +#define LPCR_GTSE ASM_CONST(0x0000000000000400) /* Guest Translation Shootdown Enable */ +#define LPCR_TC ASM_CONST(0x0000000000000200) /* Translation control */ +#define LPCR_HEIC ASM_CONST(0x0000000000000010) /* Hypervisor External Interrupt Control */ +#define LPCR_LPES 0x0000000c +#define LPCR_LPES0 ASM_CONST(0x0000000000000008) /* LPAR Env selector 0 */ +#define LPCR_LPES1 ASM_CONST(0x0000000000000004) /* LPAR Env selector 1 */ +#define LPCR_LPES_SH 2 +#define LPCR_RMI ASM_CONST(0x0000000000000002) /* real mode is cache inhibit */ +#define LPCR_HVICE ASM_CONST(0x0000000000000002) /* P9: HV interrupt enable */ +#define LPCR_HDICE ASM_CONST(0x0000000000000001) /* Hyp Decr enable (HV,PR,EE) */ +#define LPCR_UPRT ASM_CONST(0x0000000000400000) /* Use Process Table (ISA 3) */ +#define LPCR_HR ASM_CONST(0x0000000000100000) +#ifndef SPRN_LPID +#define SPRN_LPID 0x13F /* Logical Partition Identifier */ +#endif +#define LPID_RSVD_POWER7 0x3ff /* Reserved LPID for partn switching */ +#define LPID_RSVD 0xfff /* Reserved LPID for partn switching */ +#define SPRN_HMER 0x150 /* Hypervisor maintenance exception reg */ +#define HMER_DEBUG_TRIG (1ul << (63 - 17)) /* Debug trigger */ +#define SPRN_HMEER 0x151 /* Hyp maintenance exception enable reg */ +#define SPRN_PCR 0x152 /* Processor compatibility register */ +#define PCR_VEC_DIS (__MASK(63-0)) /* Vec. disable (bit NA since POWER8) */ +#define PCR_VSX_DIS (__MASK(63-1)) /* VSX disable (bit NA since POWER8) */ +#define PCR_TM_DIS (__MASK(63-2)) /* Trans. memory disable (POWER8) */ +#define PCR_MMA_DIS (__MASK(63-3)) /* Matrix-Multiply Accelerator */ +#define PCR_HIGH_BITS (PCR_MMA_DIS | PCR_VEC_DIS | PCR_VSX_DIS | PCR_TM_DIS) +/* + * These bits are used in the function kvmppc_set_arch_compat() to specify and + * determine both the compatibility level which we want to emulate and the + * compatibility level which the host is capable of emulating. + */ +#define PCR_ARCH_300 0x10 /* Architecture 3.00 */ +#define PCR_ARCH_207 0x8 /* Architecture 2.07 */ +#define PCR_ARCH_206 0x4 /* Architecture 2.06 */ +#define PCR_ARCH_205 0x2 /* Architecture 2.05 */ +#define PCR_LOW_BITS (PCR_ARCH_207 | PCR_ARCH_206 | PCR_ARCH_205 | PCR_ARCH_300) +#define PCR_MASK ~(PCR_HIGH_BITS | PCR_LOW_BITS) /* PCR Reserved Bits */ +#define SPRN_HEIR 0x153 /* Hypervisor Emulated Instruction Register */ +#define SPRN_TLBINDEXR 0x154 /* P7 TLB control register */ +#define SPRN_TLBVPNR 0x155 /* P7 TLB control register */ +#define SPRN_TLBRPNR 0x156 /* P7 TLB control register */ +#define SPRN_TLBLPIDR 0x157 /* P7 TLB control register */ +#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */ +#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */ +#define SPRN_DBAT1L 0x21B /* Data BAT 1 Lower Register */ +#define SPRN_DBAT1U 0x21A /* Data BAT 1 Upper Register */ +#define SPRN_DBAT2L 0x21D /* Data BAT 2 Lower Register */ +#define SPRN_DBAT2U 0x21C /* Data BAT 2 Upper Register */ +#define SPRN_DBAT3L 0x21F /* Data BAT 3 Lower Register */ +#define SPRN_DBAT3U 0x21E /* Data BAT 3 Upper Register */ +#define SPRN_DBAT4L 0x239 /* Data BAT 4 Lower Register */ +#define SPRN_DBAT4U 0x238 /* Data BAT 4 Upper Register */ +#define SPRN_DBAT5L 0x23B /* Data BAT 5 Lower Register */ +#define SPRN_DBAT5U 0x23A /* Data BAT 5 Upper Register */ +#define SPRN_DBAT6L 0x23D /* Data BAT 6 Lower Register */ +#define SPRN_DBAT6U 0x23C /* Data BAT 6 Upper Register */ +#define SPRN_DBAT7L 0x23F /* Data BAT 7 Lower Register */ +#define SPRN_DBAT7U 0x23E /* Data BAT 7 Upper Register */ +#define SPRN_PPR 0x380 /* SMT Thread status Register */ +#define SPRN_TSCR 0x399 /* Thread Switch Control Register */ + +#define SPRN_DEC 0x016 /* Decrement Register */ +#define SPRN_PIT 0x3DB /* Programmable Interval Timer (40x/BOOKE) */ + +#define SPRN_DER 0x095 /* Debug Enable Register */ +#define DER_RSTE 0x40000000 /* Reset Interrupt */ +#define DER_CHSTPE 0x20000000 /* Check Stop */ +#define DER_MCIE 0x10000000 /* Machine Check Interrupt */ +#define DER_EXTIE 0x02000000 /* External Interrupt */ +#define DER_ALIE 0x01000000 /* Alignment Interrupt */ +#define DER_PRIE 0x00800000 /* Program Interrupt */ +#define DER_FPUVIE 0x00400000 /* FP Unavailable Interrupt */ +#define DER_DECIE 0x00200000 /* Decrementer Interrupt */ +#define DER_SYSIE 0x00040000 /* System Call Interrupt */ +#define DER_TRE 0x00020000 /* Trace Interrupt */ +#define DER_SEIE 0x00004000 /* FP SW Emulation Interrupt */ +#define DER_ITLBMSE 0x00002000 /* Imp. Spec. Instruction TLB Miss */ +#define DER_ITLBERE 0x00001000 /* Imp. Spec. Instruction TLB Error */ +#define DER_DTLBMSE 0x00000800 /* Imp. Spec. Data TLB Miss */ +#define DER_DTLBERE 0x00000400 /* Imp. Spec. Data TLB Error */ +#define DER_LBRKE 0x00000008 /* Load/Store Breakpoint Interrupt */ +#define DER_IBRKE 0x00000004 /* Instruction Breakpoint Interrupt */ +#define DER_EBRKE 0x00000002 /* External Breakpoint Interrupt */ +#define DER_DPIE 0x00000001 /* Dev. Port Nonmaskable Request */ +#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */ +#define SPRN_DHDES 0x0B1 /* Directed Hyp. Doorbell Exc. State */ +#define SPRN_DPDES 0x0B0 /* Directed Priv. Doorbell Exc. State */ +#define SPRN_EAR 0x11A /* External Address Register */ +#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */ +#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Register */ +#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */ +#define HID0_HDICE_SH (63 - 23) /* 970 HDEC interrupt enable */ +#define HID0_EMCP (1<<31) /* Enable Machine Check pin */ +#define HID0_EBA (1<<29) /* Enable Bus Address Parity */ +#define HID0_EBD (1<<28) /* Enable Bus Data Parity */ +#define HID0_SBCLK (1<<27) +#define HID0_EICE (1<<26) +#define HID0_TBEN (1<<26) /* Timebase enable - 745x */ +#define HID0_ECLK (1<<25) +#define HID0_PAR (1<<24) +#define HID0_STEN (1<<24) /* Software table search enable - 745x */ +#define HID0_HIGH_BAT (1<<23) /* Enable high BATs - 7455 */ +#define HID0_DOZE (1<<23) +#define HID0_NAP (1<<22) +#define HID0_SLEEP (1<<21) +#define HID0_DPM (1<<20) +#define HID0_BHTCLR (1<<18) /* Clear branch history table - 7450 */ +#define HID0_XAEN (1<<17) /* Extended addressing enable - 7450 */ +#define HID0_NHR (1<<16) /* Not hard reset (software bit-7450)*/ +#define HID0_ICE (1<<15) /* Instruction Cache Enable */ +#define HID0_DCE (1<<14) /* Data Cache Enable */ +#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */ +#define HID0_DLOCK (1<<12) /* Data Cache Lock */ +#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */ +#define HID0_DCI (1<<10) /* Data Cache Invalidate */ +#define HID0_SPD (1<<9) /* Speculative disable */ +#define HID0_DAPUEN (1<<8) /* Debug APU enable */ +#define HID0_SGE (1<<7) /* Store Gathering Enable */ +#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */ +#define HID0_DCFA (1<<6) /* Data Cache Flush Assist */ +#define HID0_LRSTK (1<<4) /* Link register stack - 745x */ +#define HID0_BTIC (1<<5) /* Branch Target Instr Cache Enable */ +#define HID0_ABE (1<<3) /* Address Broadcast Enable */ +#define HID0_FOLD (1<<3) /* Branch Folding enable - 745x */ +#define HID0_BHTE (1<<2) /* Branch History Table Enable */ +#define HID0_BTCD (1<<1) /* Branch target cache disable */ +#define HID0_NOPDST (1<<1) /* No-op dst, dstt, etc. instr. */ +#define HID0_NOPTI (1<<0) /* No-op dcbt and dcbst instr. */ +/* POWER8 HID0 bits */ +#define HID0_POWER8_4LPARMODE __MASK(61) +#define HID0_POWER8_2LPARMODE __MASK(57) +#define HID0_POWER8_1TO2LPAR __MASK(52) +#define HID0_POWER8_1TO4LPAR __MASK(51) +#define HID0_POWER8_DYNLPARDIS __MASK(48) + +/* POWER9 HID0 bits */ +#define HID0_POWER9_RADIX __MASK(63 - 8) + +#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */ +#ifdef CONFIG_PPC_BOOK3S_32 +#define HID1_EMCP (1<<31) /* 7450 Machine Check Pin Enable */ +#define HID1_DFS (1<<22) /* 7447A Dynamic Frequency Scaling */ +#define HID1_PC0 (1<<16) /* 7450 PLL_CFG[0] */ +#define HID1_PC1 (1<<15) /* 7450 PLL_CFG[1] */ +#define HID1_PC2 (1<<14) /* 7450 PLL_CFG[2] */ +#define HID1_PC3 (1<<13) /* 7450 PLL_CFG[3] */ +#define HID1_SYNCBE (1<<11) /* 7450 ABE for sync, eieio */ +#define HID1_ABE (1<<10) /* 7450 Address Broadcast Enable */ +#define HID1_PS (1<<16) /* 750FX PLL selection */ +#endif +#define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */ +#define SPRN_HID2_GEKKO 0x398 /* Gekko HID2 Register */ +#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */ +#define SPRN_IABR2 0x3FA /* 83xx */ +#define SPRN_IBCR 0x135 /* 83xx Insn Breakpoint Control Reg */ +#define SPRN_IAMR 0x03D /* Instr. Authority Mask Reg */ +#define SPRN_HID4 0x3F4 /* 970 HID4 */ +#define HID4_LPES0 (1ul << (63-0)) /* LPAR env. sel. bit 0 */ +#define HID4_RMLS2_SH (63 - 2) /* Real mode limit bottom 2 bits */ +#define HID4_LPID5_SH (63 - 6) /* partition ID bottom 4 bits */ +#define HID4_RMOR_SH (63 - 22) /* real mode offset (16 bits) */ +#define HID4_RMOR (0xFFFFul << HID4_RMOR_SH) +#define HID4_LPES1 (1 << (63-57)) /* LPAR env. sel. bit 1 */ +#define HID4_RMLS0_SH (63 - 58) /* Real mode limit top bit */ +#define HID4_LPID1_SH 0 /* partition ID top 2 bits */ +#define SPRN_HID4_GEKKO 0x3F3 /* Gekko HID4 */ +#define SPRN_HID5 0x3F6 /* 970 HID5 */ +#define SPRN_HID6 0x3F9 /* BE HID 6 */ +#define HID6_LB (0x0F<<12) /* Concurrent Large Page Modes */ +#define HID6_DLP (1<<20) /* Disable all large page modes (4K only) */ +#define SPRN_TSC_CELL 0x399 /* Thread switch control on Cell */ +#define TSC_CELL_DEC_ENABLE_0 0x400000 /* Decrementer Interrupt */ +#define TSC_CELL_DEC_ENABLE_1 0x200000 /* Decrementer Interrupt */ +#define TSC_CELL_EE_ENABLE 0x100000 /* External Interrupt */ +#define TSC_CELL_EE_BOOST 0x080000 /* External Interrupt Boost */ +#define SPRN_TSC 0x3FD /* Thread switch control on others */ +#define SPRN_TST 0x3FC /* Thread switch timeout on others */ +#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2) +#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */ +#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */ +#endif +#define SPRN_IBAT0L 0x211 /* Instruction BAT 0 Lower Register */ +#define SPRN_IBAT0U 0x210 /* Instruction BAT 0 Upper Register */ +#define SPRN_IBAT1L 0x213 /* Instruction BAT 1 Lower Register */ +#define SPRN_IBAT1U 0x212 /* Instruction BAT 1 Upper Register */ +#define SPRN_IBAT2L 0x215 /* Instruction BAT 2 Lower Register */ +#define SPRN_IBAT2U 0x214 /* Instruction BAT 2 Upper Register */ +#define SPRN_IBAT3L 0x217 /* Instruction BAT 3 Lower Register */ +#define SPRN_IBAT3U 0x216 /* Instruction BAT 3 Upper Register */ +#define SPRN_IBAT4L 0x231 /* Instruction BAT 4 Lower Register */ +#define SPRN_IBAT4U 0x230 /* Instruction BAT 4 Upper Register */ +#define SPRN_IBAT5L 0x233 /* Instruction BAT 5 Lower Register */ +#define SPRN_IBAT5U 0x232 /* Instruction BAT 5 Upper Register */ +#define SPRN_IBAT6L 0x235 /* Instruction BAT 6 Lower Register */ +#define SPRN_IBAT6U 0x234 /* Instruction BAT 6 Upper Register */ +#define SPRN_IBAT7L 0x237 /* Instruction BAT 7 Lower Register */ +#define SPRN_IBAT7U 0x236 /* Instruction BAT 7 Upper Register */ +#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */ +#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */ +#ifndef SPRN_ICTRL +#define SPRN_ICTRL 0x3F3 /* 1011 7450 icache and interrupt ctrl */ +#endif +#define ICTRL_EICE 0x08000000 /* enable icache parity errs */ +#define ICTRL_EDC 0x04000000 /* enable dcache parity errs */ +#define ICTRL_EICP 0x00000100 /* enable icache par. check */ +#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */ +#define SPRN_IMMR 0x27E /* Internal Memory Map Register */ +#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Register */ +#define SPRN_L2CR2 0x3f8 +#define L2CR_L2E 0x80000000 /* L2 enable */ +#define L2CR_L2PE 0x40000000 /* L2 parity enable */ +#define L2CR_L2SIZ_MASK 0x30000000 /* L2 size mask */ +#define L2CR_L2SIZ_256KB 0x10000000 /* L2 size 256KB */ +#define L2CR_L2SIZ_512KB 0x20000000 /* L2 size 512KB */ +#define L2CR_L2SIZ_1MB 0x30000000 /* L2 size 1MB */ +#define L2CR_L2CLK_MASK 0x0e000000 /* L2 clock mask */ +#define L2CR_L2CLK_DISABLED 0x00000000 /* L2 clock disabled */ +#define L2CR_L2CLK_DIV1 0x02000000 /* L2 clock / 1 */ +#define L2CR_L2CLK_DIV1_5 0x04000000 /* L2 clock / 1.5 */ +#define L2CR_L2CLK_DIV2 0x08000000 /* L2 clock / 2 */ +#define L2CR_L2CLK_DIV2_5 0x0a000000 /* L2 clock / 2.5 */ +#define L2CR_L2CLK_DIV3 0x0c000000 /* L2 clock / 3 */ +#define L2CR_L2RAM_MASK 0x01800000 /* L2 RAM type mask */ +#define L2CR_L2RAM_FLOW 0x00000000 /* L2 RAM flow through */ +#define L2CR_L2RAM_PIPE 0x01000000 /* L2 RAM pipelined */ +#define L2CR_L2RAM_PIPE_LW 0x01800000 /* L2 RAM pipelined latewr */ +#define L2CR_L2DO 0x00400000 /* L2 data only */ +#define L2CR_L2I 0x00200000 /* L2 global invalidate */ +#define L2CR_L2CTL 0x00100000 /* L2 RAM control */ +#define L2CR_L2WT 0x00080000 /* L2 write-through */ +#define L2CR_L2TS 0x00040000 /* L2 test support */ +#define L2CR_L2OH_MASK 0x00030000 /* L2 output hold mask */ +#define L2CR_L2OH_0_5 0x00000000 /* L2 output hold 0.5 ns */ +#define L2CR_L2OH_1_0 0x00010000 /* L2 output hold 1.0 ns */ +#define L2CR_L2SL 0x00008000 /* L2 DLL slow */ +#define L2CR_L2DF 0x00004000 /* L2 differential clock */ +#define L2CR_L2BYP 0x00002000 /* L2 DLL bypass */ +#define L2CR_L2IP 0x00000001 /* L2 GI in progress */ +#define L2CR_L2IO_745x 0x00100000 /* L2 instr. only (745x) */ +#define L2CR_L2DO_745x 0x00010000 /* L2 data only (745x) */ +#define L2CR_L2REP_745x 0x00001000 /* L2 repl. algorithm (745x) */ +#define L2CR_L2HWF_745x 0x00000800 /* L2 hardware flush (745x) */ +#define SPRN_L3CR 0x3FA /* Level 3 Cache Control Register */ +#define L3CR_L3E 0x80000000 /* L3 enable */ +#define L3CR_L3PE 0x40000000 /* L3 data parity enable */ +#define L3CR_L3APE 0x20000000 /* L3 addr parity enable */ +#define L3CR_L3SIZ 0x10000000 /* L3 size */ +#define L3CR_L3CLKEN 0x08000000 /* L3 clock enable */ +#define L3CR_L3RES 0x04000000 /* L3 special reserved bit */ +#define L3CR_L3CLKDIV 0x03800000 /* L3 clock divisor */ +#define L3CR_L3IO 0x00400000 /* L3 instruction only */ +#define L3CR_L3SPO 0x00040000 /* L3 sample point override */ +#define L3CR_L3CKSP 0x00030000 /* L3 clock sample point */ +#define L3CR_L3PSP 0x0000e000 /* L3 P-clock sample point */ +#define L3CR_L3REP 0x00001000 /* L3 replacement algorithm */ +#define L3CR_L3HWF 0x00000800 /* L3 hardware flush */ +#define L3CR_L3I 0x00000400 /* L3 global invalidate */ +#define L3CR_L3RT 0x00000300 /* L3 SRAM type */ +#define L3CR_L3NIRCA 0x00000080 /* L3 non-integer ratio clock adj. */ +#define L3CR_L3DO 0x00000040 /* L3 data only mode */ +#define L3CR_PMEN 0x00000004 /* L3 private memory enable */ +#define L3CR_PMSIZ 0x00000001 /* L3 private memory size */ + +#define SPRN_MSSCR0 0x3f6 /* Memory Subsystem Control Register 0 */ +#define SPRN_MSSSR0 0x3f7 /* Memory Subsystem Status Register 1 */ +#define SPRN_LDSTCR 0x3f8 /* Load/Store control register */ +#define SPRN_LDSTDB 0x3f4 /* */ +#define SPRN_LR 0x008 /* Link Register */ +#ifndef SPRN_PIR +#define SPRN_PIR 0x3FF /* Processor Identification Register */ +#endif +#define SPRN_TIR 0x1BE /* Thread Identification Register */ +#define SPRN_PTCR 0x1D0 /* Partition table control Register */ +#define SPRN_PSPB 0x09F /* Problem State Priority Boost reg */ +#define SPRN_PTEHI 0x3D5 /* 981 7450 PTE HI word (S/W TLB load) */ +#define SPRN_PTELO 0x3D6 /* 982 7450 PTE LO word (S/W TLB load) */ +#define SPRN_PURR 0x135 /* Processor Utilization of Resources Reg */ +#define SPRN_PVR 0x11F /* Processor Version Register */ +#define SPRN_RPA 0x3D6 /* Required Physical Address Register */ +#define SPRN_SDA 0x3BF /* Sampled Data Address Register */ +#define SPRN_SDR1 0x019 /* MMU Hash Base Register */ +#define SPRN_ASR 0x118 /* Address Space Register */ +#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */ +#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */ +#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */ +#define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */ +#define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */ +#define SPRN_USPRG3 0x103 /* SPRG3 userspace read */ +#define SPRN_SPRG4 0x114 /* Special Purpose Register General 4 */ +#define SPRN_USPRG4 0x104 /* SPRG4 userspace read */ +#define SPRN_SPRG5 0x115 /* Special Purpose Register General 5 */ +#define SPRN_USPRG5 0x105 /* SPRG5 userspace read */ +#define SPRN_SPRG6 0x116 /* Special Purpose Register General 6 */ +#define SPRN_USPRG6 0x106 /* SPRG6 userspace read */ +#define SPRN_SPRG7 0x117 /* Special Purpose Register General 7 */ +#define SPRN_USPRG7 0x107 /* SPRG7 userspace read */ +#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */ +#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */ + +#ifdef CONFIG_PPC_BOOK3S +/* + * Bits loaded from MSR upon interrupt. + * PPC (64-bit) bits 33-36,42-47 are interrupt dependent, the others are + * loaded from MSR. The exception is that SRESET and MCE do not always load + * bit 62 (RI) from MSR. Don't use PPC_BITMASK for this because 32-bit uses + * it. + */ +#define SRR1_MSR_BITS (~0x783f0000UL) +#endif + +#define SRR1_ISI_NOPT 0x40000000 /* ISI: Not found in hash */ +#define SRR1_ISI_N_G_OR_CIP 0x10000000 /* ISI: Access is no-exec or G or CI for a prefixed instruction */ +#define SRR1_ISI_PROT 0x08000000 /* ISI: Other protection fault */ +#define SRR1_WAKEMASK 0x00380000 /* reason for wakeup */ +#define SRR1_WAKEMASK_P8 0x003c0000 /* reason for wakeup on POWER8 and 9 */ +#define SRR1_WAKEMCE_RESVD 0x003c0000 /* Unused/reserved value used by MCE wakeup to indicate cause to idle wakeup handler */ +#define SRR1_WAKESYSERR 0x00300000 /* System error */ +#define SRR1_WAKEEE 0x00200000 /* External interrupt */ +#define SRR1_WAKEHVI 0x00240000 /* Hypervisor Virtualization Interrupt (P9) */ +#define SRR1_WAKEMT 0x00280000 /* mtctrl */ +#define SRR1_WAKEHMI 0x00280000 /* Hypervisor maintenance */ +#define SRR1_WAKEDEC 0x00180000 /* Decrementer interrupt */ +#define SRR1_WAKEDBELL 0x00140000 /* Privileged doorbell on P8 */ +#define SRR1_WAKETHERM 0x00100000 /* Thermal management interrupt */ +#define SRR1_WAKERESET 0x00100000 /* System reset */ +#define SRR1_WAKEHDBELL 0x000c0000 /* Hypervisor doorbell on P8 */ +#define SRR1_WAKESTATE 0x00030000 /* Powersave exit mask [46:47] */ +#define SRR1_WS_HVLOSS 0x00030000 /* HV resources not maintained */ +#define SRR1_WS_GPRLOSS 0x00020000 /* GPRs not maintained */ +#define SRR1_WS_NOLOSS 0x00010000 /* All resources maintained */ +#define SRR1_PROGTM 0x00200000 /* TM Bad Thing */ +#define SRR1_PROGFPE 0x00100000 /* Floating Point Enabled */ +#define SRR1_PROGILL 0x00080000 /* Illegal instruction */ +#define SRR1_PROGPRIV 0x00040000 /* Privileged instruction */ +#define SRR1_PROGTRAP 0x00020000 /* Trap */ +#define SRR1_PROGADDR 0x00010000 /* SRR0 contains subsequent addr */ + +#define SRR1_MCE_MCP 0x00080000 /* Machine check signal caused interrupt */ +#define SRR1_BOUNDARY 0x10000000 /* Prefixed instruction crosses 64-byte boundary */ +#define SRR1_PREFIXED 0x20000000 /* Exception caused by prefixed instruction */ + +#define SPRN_HSRR0 0x13A /* Save/Restore Register 0 */ +#define SPRN_HSRR1 0x13B /* Save/Restore Register 1 */ +#define HSRR1_DENORM 0x00100000 /* Denorm exception */ +#define HSRR1_HISI_WRITE 0x00010000 /* HISI bcs couldn't update mem */ + +#define SPRN_TBCTL 0x35f /* PA6T Timebase control register */ +#define TBCTL_FREEZE 0x0000000000000000ull /* Freeze all tbs */ +#define TBCTL_RESTART 0x0000000100000000ull /* Restart all tbs */ +#define TBCTL_UPDATE_UPPER 0x0000000200000000ull /* Set upper 32 bits */ +#define TBCTL_UPDATE_LOWER 0x0000000300000000ull /* Set lower 32 bits */ + +#ifndef SPRN_SVR +#define SPRN_SVR 0x11E /* System Version Register */ +#endif +#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */ +/* these bits were defined in inverted endian sense originally, ugh, confusing */ +#define THRM1_TIN (1 << 31) +#define THRM1_TIV (1 << 30) +#define THRM1_THRES(x) ((x&0x7f)<<23) +#define THRM3_SITV(x) ((x & 0x1fff) << 1) +#define THRM1_TID (1<<2) +#define THRM1_TIE (1<<1) +#define THRM1_V (1<<0) +#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */ +#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */ +#define THRM3_E (1<<0) +#define SPRN_TLBMISS 0x3D4 /* 980 7450 TLB Miss Register */ +#define SPRN_UMMCR0 0x3A8 /* User Monitor Mode Control Register 0 */ +#define SPRN_UMMCR1 0x3AC /* User Monitor Mode Control Register 0 */ +#define SPRN_UPMC1 0x3A9 /* User Performance Counter Register 1 */ +#define SPRN_UPMC2 0x3AA /* User Performance Counter Register 2 */ +#define SPRN_UPMC3 0x3AD /* User Performance Counter Register 3 */ +#define SPRN_UPMC4 0x3AE /* User Performance Counter Register 4 */ +#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */ +#define SPRN_VRSAVE 0x100 /* Vector Register Save Register */ +#define SPRN_XER 0x001 /* Fixed Point Exception Register */ + +#define SPRN_MMCR0_GEKKO 0x3B8 /* Gekko Monitor Mode Control Register 0 */ +#define SPRN_MMCR1_GEKKO 0x3BC /* Gekko Monitor Mode Control Register 1 */ +#define SPRN_PMC1_GEKKO 0x3B9 /* Gekko Performance Monitor Control 1 */ +#define SPRN_PMC2_GEKKO 0x3BA /* Gekko Performance Monitor Control 2 */ +#define SPRN_PMC3_GEKKO 0x3BD /* Gekko Performance Monitor Control 3 */ +#define SPRN_PMC4_GEKKO 0x3BE /* Gekko Performance Monitor Control 4 */ +#define SPRN_WPAR_GEKKO 0x399 /* Gekko Write Pipe Address Register */ + +#define SPRN_SCOMC 0x114 /* SCOM Access Control */ +#define SPRN_SCOMD 0x115 /* SCOM Access DATA */ + +/* Performance monitor SPRs */ +#ifdef CONFIG_PPC64 +#define SPRN_MMCR0 795 +#define MMCR0_FC 0x80000000UL /* freeze counters */ +#define MMCR0_FCS 0x40000000UL /* freeze in supervisor state */ +#define MMCR0_KERNEL_DISABLE MMCR0_FCS +#define MMCR0_FCP 0x20000000UL /* freeze in problem state */ +#define MMCR0_PROBLEM_DISABLE MMCR0_FCP +#define MMCR0_FCM1 0x10000000UL /* freeze counters while MSR mark = 1 */ +#define MMCR0_FCM0 0x08000000UL /* freeze counters while MSR mark = 0 */ +#define MMCR0_PMXE ASM_CONST(0x04000000) /* perf mon exception enable */ +#define MMCR0_FCECE ASM_CONST(0x02000000) /* freeze ctrs on enabled cond or event */ +#define MMCR0_TBEE 0x00400000UL /* time base exception enable */ +#define MMCR0_BHRBA 0x00200000UL /* BHRB Access allowed in userspace */ +#define MMCR0_EBE 0x00100000UL /* Event based branch enable */ +#define MMCR0_PMCC 0x000c0000UL /* PMC control */ +#define MMCR0_PMCCEXT ASM_CONST(0x00000200) /* PMCCEXT control */ +#define MMCR0_PMCC_U6 0x00080000UL /* PMC1-6 are R/W by user (PR) */ +#define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/ +#define MMCR0_PMCjCE ASM_CONST(0x00004000) /* PMCj count enable*/ +#define MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */ +#define MMCR0_PMAO_SYNC ASM_CONST(0x00000800) /* PMU intr is synchronous */ +#define MMCR0_C56RUN ASM_CONST(0x00000100) /* PMC5/6 count when RUN=0 */ +/* performance monitor alert has occurred, set to 0 after handling exception */ +#define MMCR0_PMAO ASM_CONST(0x00000080) +#define MMCR0_SHRFC 0x00000040UL /* SHRre freeze conditions between threads */ +#define MMCR0_FC56 0x00000010UL /* freeze counters 5 and 6 */ +#define MMCR0_FCTI 0x00000008UL /* freeze counters in tags inactive mode */ +#define MMCR0_FCTA 0x00000004UL /* freeze counters in tags active mode */ +#define MMCR0_FCWAIT 0x00000002UL /* freeze counter in WAIT state */ +#define MMCR0_FCHV 0x00000001UL /* freeze conditions in hypervisor mode */ +#define SPRN_MMCR1 798 +#define SPRN_MMCR2 785 +#define SPRN_MMCR3 754 +#define SPRN_UMMCR2 769 +#define SPRN_UMMCR3 738 +#define SPRN_MMCRA 0x312 +#define MMCRA_SDSYNC 0x80000000UL /* SDAR synced with SIAR */ +#define MMCRA_SDAR_DCACHE_MISS 0x40000000UL +#define MMCRA_SDAR_ERAT_MISS 0x20000000UL +#define MMCRA_SIHV 0x10000000UL /* state of MSR HV when SIAR set */ +#define MMCRA_SIPR 0x08000000UL /* state of MSR PR when SIAR set */ +#define MMCRA_SLOT 0x07000000UL /* SLOT bits (37-39) */ +#define MMCRA_SLOT_SHIFT 24 +#define MMCRA_SAMPLE_ENABLE 0x00000001UL /* enable sampling */ +#define MMCRA_BHRB_DISABLE _UL(0x2000000000) // BHRB disable bit for ISA v3.1 +#define POWER6_MMCRA_SDSYNC 0x0000080000000000ULL /* SDAR/SIAR synced */ +#define POWER6_MMCRA_SIHV 0x0000040000000000ULL +#define POWER6_MMCRA_SIPR 0x0000020000000000ULL +#define POWER6_MMCRA_THRM 0x00000020UL +#define POWER6_MMCRA_OTHER 0x0000000EUL + +#define POWER7P_MMCRA_SIAR_VALID 0x10000000 /* P7+ SIAR contents valid */ +#define POWER7P_MMCRA_SDAR_VALID 0x08000000 /* P7+ SDAR contents valid */ + +#define SPRN_MMCRH 316 /* Hypervisor monitor mode control register */ +#define SPRN_MMCRS 894 /* Supervisor monitor mode control register */ +#define SPRN_MMCRC 851 /* Core monitor mode control register */ +#define SPRN_EBBHR 804 /* Event based branch handler register */ +#define SPRN_EBBRR 805 /* Event based branch return register */ +#define SPRN_BESCR 806 /* Branch event status and control register */ +#define BESCR_GE 0x8000000000000000ULL /* Global Enable */ +#define SPRN_WORT 895 /* Workload optimization register - thread */ +#define SPRN_WORC 863 /* Workload optimization register - core */ + +#define SPRN_PMC1 787 +#define SPRN_PMC2 788 +#define SPRN_PMC3 789 +#define SPRN_PMC4 790 +#define SPRN_PMC5 791 +#define SPRN_PMC6 792 +#define SPRN_PMC7 793 +#define SPRN_PMC8 794 +#define SPRN_SIER 784 +#define SIER_SIPR 0x2000000 /* Sampled MSR_PR */ +#define SIER_SIHV 0x1000000 /* Sampled MSR_HV */ +#define SIER_SIAR_VALID 0x0400000 /* SIAR contents valid */ +#define SIER_SDAR_VALID 0x0200000 /* SDAR contents valid */ +#define SPRN_SIER2 752 +#define SPRN_SIER3 753 +#define SPRN_USIER2 736 +#define SPRN_USIER3 737 +#define SPRN_SIAR 796 +#define SPRN_SDAR 797 +#define SPRN_TACR 888 +#define SPRN_TCSCR 889 +#define SPRN_CSIGR 890 +#define SPRN_SPMC1 892 +#define SPRN_SPMC2 893 + +/* When EBB is enabled, some of MMCR0/MMCR2/SIER are user accessible */ +#define MMCR0_USER_MASK (MMCR0_FC | MMCR0_PMXE | MMCR0_PMAO) +#define MMCR2_USER_MASK 0x4020100804020000UL /* (FC1P|FC2P|FC3P|FC4P|FC5P|FC6P) */ +#define SIER_USER_MASK 0x7fffffUL + +#define SPRN_PA6T_MMCR0 795 +#define PA6T_MMCR0_EN0 0x0000000000000001UL +#define PA6T_MMCR0_EN1 0x0000000000000002UL +#define PA6T_MMCR0_EN2 0x0000000000000004UL +#define PA6T_MMCR0_EN3 0x0000000000000008UL +#define PA6T_MMCR0_EN4 0x0000000000000010UL +#define PA6T_MMCR0_EN5 0x0000000000000020UL +#define PA6T_MMCR0_SUPEN 0x0000000000000040UL +#define PA6T_MMCR0_PREN 0x0000000000000080UL +#define PA6T_MMCR0_HYPEN 0x0000000000000100UL +#define PA6T_MMCR0_FCM0 0x0000000000000200UL +#define PA6T_MMCR0_FCM1 0x0000000000000400UL +#define PA6T_MMCR0_INTGEN 0x0000000000000800UL +#define PA6T_MMCR0_INTEN0 0x0000000000001000UL +#define PA6T_MMCR0_INTEN1 0x0000000000002000UL +#define PA6T_MMCR0_INTEN2 0x0000000000004000UL +#define PA6T_MMCR0_INTEN3 0x0000000000008000UL +#define PA6T_MMCR0_INTEN4 0x0000000000010000UL +#define PA6T_MMCR0_INTEN5 0x0000000000020000UL +#define PA6T_MMCR0_DISCNT 0x0000000000040000UL +#define PA6T_MMCR0_UOP 0x0000000000080000UL +#define PA6T_MMCR0_TRG 0x0000000000100000UL +#define PA6T_MMCR0_TRGEN 0x0000000000200000UL +#define PA6T_MMCR0_TRGREG 0x0000000001600000UL +#define PA6T_MMCR0_SIARLOG 0x0000000002000000UL +#define PA6T_MMCR0_SDARLOG 0x0000000004000000UL +#define PA6T_MMCR0_PROEN 0x0000000008000000UL +#define PA6T_MMCR0_PROLOG 0x0000000010000000UL +#define PA6T_MMCR0_DAMEN2 0x0000000020000000UL +#define PA6T_MMCR0_DAMEN3 0x0000000040000000UL +#define PA6T_MMCR0_DAMEN4 0x0000000080000000UL +#define PA6T_MMCR0_DAMEN5 0x0000000100000000UL +#define PA6T_MMCR0_DAMSEL2 0x0000000200000000UL +#define PA6T_MMCR0_DAMSEL3 0x0000000400000000UL +#define PA6T_MMCR0_DAMSEL4 0x0000000800000000UL +#define PA6T_MMCR0_DAMSEL5 0x0000001000000000UL +#define PA6T_MMCR0_HANDDIS 0x0000002000000000UL +#define PA6T_MMCR0_PCTEN 0x0000004000000000UL +#define PA6T_MMCR0_SOCEN 0x0000008000000000UL +#define PA6T_MMCR0_SOCMOD 0x0000010000000000UL + +#define SPRN_PA6T_MMCR1 798 +#define PA6T_MMCR1_ES2 0x00000000000000ffUL +#define PA6T_MMCR1_ES3 0x000000000000ff00UL +#define PA6T_MMCR1_ES4 0x0000000000ff0000UL +#define PA6T_MMCR1_ES5 0x00000000ff000000UL + +#define SPRN_PA6T_UPMC0 771 /* User PerfMon Counter 0 */ +#define SPRN_PA6T_UPMC1 772 /* ... */ +#define SPRN_PA6T_UPMC2 773 +#define SPRN_PA6T_UPMC3 774 +#define SPRN_PA6T_UPMC4 775 +#define SPRN_PA6T_UPMC5 776 +#define SPRN_PA6T_UMMCR0 779 /* User Monitor Mode Control Register 0 */ +#define SPRN_PA6T_SIAR 780 /* Sampled Instruction Address */ +#define SPRN_PA6T_UMMCR1 782 /* User Monitor Mode Control Register 1 */ +#define SPRN_PA6T_SIER 785 /* Sampled Instruction Event Register */ +#define SPRN_PA6T_PMC0 787 +#define SPRN_PA6T_PMC1 788 +#define SPRN_PA6T_PMC2 789 +#define SPRN_PA6T_PMC3 790 +#define SPRN_PA6T_PMC4 791 +#define SPRN_PA6T_PMC5 792 +#define SPRN_PA6T_TSR0 793 /* Timestamp Register 0 */ +#define SPRN_PA6T_TSR1 794 /* Timestamp Register 1 */ +#define SPRN_PA6T_TSR2 799 /* Timestamp Register 2 */ +#define SPRN_PA6T_TSR3 784 /* Timestamp Register 3 */ + +#define SPRN_PA6T_IER 981 /* Icache Error Register */ +#define SPRN_PA6T_DER 982 /* Dcache Error Register */ +#define SPRN_PA6T_BER 862 /* BIU Error Address Register */ +#define SPRN_PA6T_MER 849 /* MMU Error Register */ + +#define SPRN_PA6T_IMA0 880 /* Instruction Match Array 0 */ +#define SPRN_PA6T_IMA1 881 /* ... */ +#define SPRN_PA6T_IMA2 882 +#define SPRN_PA6T_IMA3 883 +#define SPRN_PA6T_IMA4 884 +#define SPRN_PA6T_IMA5 885 +#define SPRN_PA6T_IMA6 886 +#define SPRN_PA6T_IMA7 887 +#define SPRN_PA6T_IMA8 888 +#define SPRN_PA6T_IMA9 889 +#define SPRN_PA6T_BTCR 978 /* Breakpoint and Tagging Control Register */ +#define SPRN_PA6T_IMAAT 979 /* Instruction Match Array Action Table */ +#define SPRN_PA6T_PCCR 1019 /* Power Counter Control Register */ +#define SPRN_BKMK 1020 /* Cell Bookmark Register */ +#define SPRN_PA6T_RPCCR 1021 /* Retire PC Trace Control Register */ + + +#else /* 32-bit */ +#define SPRN_MMCR0 952 /* Monitor Mode Control Register 0 */ +#define MMCR0_FC 0x80000000UL /* freeze counters */ +#define MMCR0_FCS 0x40000000UL /* freeze in supervisor state */ +#define MMCR0_FCP 0x20000000UL /* freeze in problem state */ +#define MMCR0_FCM1 0x10000000UL /* freeze counters while MSR mark = 1 */ +#define MMCR0_FCM0 0x08000000UL /* freeze counters while MSR mark = 0 */ +#define MMCR0_PMXE 0x04000000UL /* performance monitor exception enable */ +#define MMCR0_FCECE 0x02000000UL /* freeze ctrs on enabled cond or event */ +#define MMCR0_TBEE 0x00400000UL /* time base exception enable */ +#define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/ +#define MMCR0_PMCnCE 0x00004000UL /* count enable for all but PMC 1*/ +#define MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */ +#define MMCR0_PMC1SEL 0x00001fc0UL /* PMC 1 Event */ +#define MMCR0_PMC2SEL 0x0000003fUL /* PMC 2 Event */ + +#define SPRN_MMCR1 956 +#define MMCR1_PMC3SEL 0xf8000000UL /* PMC 3 Event */ +#define MMCR1_PMC4SEL 0x07c00000UL /* PMC 4 Event */ +#define MMCR1_PMC5SEL 0x003e0000UL /* PMC 5 Event */ +#define MMCR1_PMC6SEL 0x0001f800UL /* PMC 6 Event */ +#define SPRN_MMCR2 944 +#define SPRN_PMC1 953 /* Performance Counter Register 1 */ +#define SPRN_PMC2 954 /* Performance Counter Register 2 */ +#define SPRN_PMC3 957 /* Performance Counter Register 3 */ +#define SPRN_PMC4 958 /* Performance Counter Register 4 */ +#define SPRN_PMC5 945 /* Performance Counter Register 5 */ +#define SPRN_PMC6 946 /* Performance Counter Register 6 */ + +#define SPRN_SIAR 955 /* Sampled Instruction Address Register */ + +/* Bit definitions for MMCR0 and PMC1 / PMC2. */ +#define MMCR0_PMC1_CYCLES (1 << 7) +#define MMCR0_PMC1_ICACHEMISS (5 << 7) +#define MMCR0_PMC1_DTLB (6 << 7) +#define MMCR0_PMC2_DCACHEMISS 0x6 +#define MMCR0_PMC2_CYCLES 0x1 +#define MMCR0_PMC2_ITLB 0x7 +#define MMCR0_PMC2_LOADMISSTIME 0x5 +#endif + +/* + * SPRG usage: + * + * All 64-bit: + * - SPRG1 stores PACA pointer except 64-bit server in + * HV mode in which case it is HSPRG0 + * + * 64-bit server: + * - SPRG0 scratch for TM recheckpoint/reclaim (reserved for HV on Power4) + * - SPRG2 scratch for exception vectors + * - SPRG3 CPU and NUMA node for VDSO getcpu (user visible) + * - HSPRG0 stores PACA in HV mode + * - HSPRG1 scratch for "HV" exceptions + * + * 64-bit embedded + * - SPRG0 generic exception scratch + * - SPRG2 TLB exception stack + * - SPRG3 critical exception scratch (user visible, sorry!) + * - SPRG4 unused (user visible) + * - SPRG6 TLB miss scratch (user visible, sorry !) + * - SPRG7 CPU and NUMA node for VDSO getcpu (user visible) + * - SPRG8 machine check exception scratch + * - SPRG9 debug exception scratch + * + * All 32-bit: + * - SPRG3 current thread_struct physical addr pointer + * (virtual on BookE, physical on others) + * + * 32-bit classic: + * - SPRG0 scratch for exception vectors + * - SPRG1 scratch for exception vectors + * - SPRG2 indicator that we are in RTAS + * - SPRG4 (603 only) pseudo TLB LRU data + * + * 32-bit 40x: + * - SPRG0 scratch for exception vectors + * - SPRG1 scratch for exception vectors + * - SPRG2 scratch for exception vectors + * - SPRG4 scratch for exception vectors (not 403) + * - SPRG5 scratch for exception vectors (not 403) + * - SPRG6 scratch for exception vectors (not 403) + * - SPRG7 scratch for exception vectors (not 403) + * + * 32-bit 440 and FSL BookE: + * - SPRG0 scratch for exception vectors + * - SPRG1 scratch for exception vectors (*) + * - SPRG2 scratch for crit interrupts handler + * - SPRG4 scratch for exception vectors + * - SPRG5 scratch for exception vectors + * - SPRG6 scratch for machine check handler + * - SPRG7 scratch for exception vectors + * - SPRG9 scratch for debug vectors (e500 only) + * + * Additionally, BookE separates "read" and "write" + * of those registers. That allows to use the userspace + * readable variant for reads, which can avoid a fault + * with KVM type virtualization. + * + * 32-bit 8xx: + * - SPRG0 scratch for exception vectors + * - SPRG1 scratch for exception vectors + * - SPRG2 scratch for exception vectors + * + */ +#ifdef CONFIG_PPC64 +#define SPRN_SPRG_PACA SPRN_SPRG1 +#else +#define SPRN_SPRG_THREAD SPRN_SPRG3 +#endif + +#ifdef CONFIG_PPC_BOOK3S_64 +#define SPRN_SPRG_SCRATCH0 SPRN_SPRG2 +#define SPRN_SPRG_HPACA SPRN_HSPRG0 +#define SPRN_SPRG_HSCRATCH0 SPRN_HSPRG1 +#define SPRN_SPRG_VDSO_READ SPRN_USPRG3 +#define SPRN_SPRG_VDSO_WRITE SPRN_SPRG3 + +#define GET_PACA(rX) \ + BEGIN_FTR_SECTION_NESTED(66); \ + mfspr rX,SPRN_SPRG_PACA; \ + FTR_SECTION_ELSE_NESTED(66); \ + mfspr rX,SPRN_SPRG_HPACA; \ + ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE, 66) + +#define SET_PACA(rX) \ + BEGIN_FTR_SECTION_NESTED(66); \ + mtspr SPRN_SPRG_PACA,rX; \ + FTR_SECTION_ELSE_NESTED(66); \ + mtspr SPRN_SPRG_HPACA,rX; \ + ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE, 66) + +#define GET_SCRATCH0(rX) \ + BEGIN_FTR_SECTION_NESTED(66); \ + mfspr rX,SPRN_SPRG_SCRATCH0; \ + FTR_SECTION_ELSE_NESTED(66); \ + mfspr rX,SPRN_SPRG_HSCRATCH0; \ + ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE, 66) + +#define SET_SCRATCH0(rX) \ + BEGIN_FTR_SECTION_NESTED(66); \ + mtspr SPRN_SPRG_SCRATCH0,rX; \ + FTR_SECTION_ELSE_NESTED(66); \ + mtspr SPRN_SPRG_HSCRATCH0,rX; \ + ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_HVMODE, 66) + +#else /* CONFIG_PPC_BOOK3S_64 */ +#define GET_SCRATCH0(rX) mfspr rX,SPRN_SPRG_SCRATCH0 +#define SET_SCRATCH0(rX) mtspr SPRN_SPRG_SCRATCH0,rX + +#endif + +#ifdef CONFIG_PPC_BOOK3E_64 +#define SPRN_SPRG_MC_SCRATCH SPRN_SPRG8 +#define SPRN_SPRG_CRIT_SCRATCH SPRN_SPRG3 +#define SPRN_SPRG_DBG_SCRATCH SPRN_SPRG9 +#define SPRN_SPRG_TLB_EXFRAME SPRN_SPRG2 +#define SPRN_SPRG_TLB_SCRATCH SPRN_SPRG6 +#define SPRN_SPRG_GEN_SCRATCH SPRN_SPRG0 +#define SPRN_SPRG_GDBELL_SCRATCH SPRN_SPRG_GEN_SCRATCH +#define SPRN_SPRG_VDSO_READ SPRN_USPRG7 +#define SPRN_SPRG_VDSO_WRITE SPRN_SPRG7 + +#define SET_PACA(rX) mtspr SPRN_SPRG_PACA,rX +#define GET_PACA(rX) mfspr rX,SPRN_SPRG_PACA + +#endif + +#ifdef CONFIG_PPC_BOOK3S_32 +#define SPRN_SPRG_SCRATCH0 SPRN_SPRG0 +#define SPRN_SPRG_SCRATCH1 SPRN_SPRG1 +#define SPRN_SPRG_PGDIR SPRN_SPRG2 +#define SPRN_SPRG_603_LRU SPRN_SPRG4 +#endif + +#ifdef CONFIG_40x +#define SPRN_SPRG_SCRATCH0 SPRN_SPRG0 +#define SPRN_SPRG_SCRATCH1 SPRN_SPRG1 +#define SPRN_SPRG_SCRATCH2 SPRN_SPRG2 +#define SPRN_SPRG_SCRATCH3 SPRN_SPRG4 +#define SPRN_SPRG_SCRATCH4 SPRN_SPRG5 +#define SPRN_SPRG_SCRATCH5 SPRN_SPRG6 +#define SPRN_SPRG_SCRATCH6 SPRN_SPRG7 +#endif + +#ifdef CONFIG_BOOKE +#define SPRN_SPRG_RSCRATCH0 SPRN_SPRG0 +#define SPRN_SPRG_WSCRATCH0 SPRN_SPRG0 +#define SPRN_SPRG_RSCRATCH1 SPRN_SPRG1 +#define SPRN_SPRG_WSCRATCH1 SPRN_SPRG1 +#define SPRN_SPRG_RSCRATCH_CRIT SPRN_SPRG2 +#define SPRN_SPRG_WSCRATCH_CRIT SPRN_SPRG2 +#define SPRN_SPRG_RSCRATCH2 SPRN_SPRG4R +#define SPRN_SPRG_WSCRATCH2 SPRN_SPRG4W +#define SPRN_SPRG_RSCRATCH3 SPRN_SPRG5R +#define SPRN_SPRG_WSCRATCH3 SPRN_SPRG5W +#define SPRN_SPRG_RSCRATCH_MC SPRN_SPRG1 +#define SPRN_SPRG_WSCRATCH_MC SPRN_SPRG1 +#define SPRN_SPRG_RSCRATCH4 SPRN_SPRG7R +#define SPRN_SPRG_WSCRATCH4 SPRN_SPRG7W +#ifdef CONFIG_E200 +#define SPRN_SPRG_RSCRATCH_DBG SPRN_SPRG6R +#define SPRN_SPRG_WSCRATCH_DBG SPRN_SPRG6W +#else +#define SPRN_SPRG_RSCRATCH_DBG SPRN_SPRG9 +#define SPRN_SPRG_WSCRATCH_DBG SPRN_SPRG9 +#endif +#endif + +#ifdef CONFIG_PPC_8xx +#define SPRN_SPRG_SCRATCH0 SPRN_SPRG0 +#define SPRN_SPRG_SCRATCH1 SPRN_SPRG1 +#define SPRN_SPRG_SCRATCH2 SPRN_SPRG2 +#endif + + + +/* + * An mtfsf instruction with the L bit set. On CPUs that support this a + * full 64bits of FPSCR is restored and on other CPUs the L bit is ignored. + * + * Until binutils gets the new form of mtfsf, hardwire the instruction. + */ +#ifdef CONFIG_PPC64 +#define MTFSF_L(REG) \ + .long (0xfc00058e | ((0xff) << 17) | ((REG) << 11) | (1 << 25)) +#else +#define MTFSF_L(REG) mtfsf 0xff, (REG) +#endif + +/* Processor Version Register (PVR) field extraction */ + +#define PVR_VER(pvr) (((pvr) >> 16) & 0xFFFF) /* Version field */ +#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */ + +#define pvr_version_is(pvr) (PVR_VER(mfspr(SPRN_PVR)) == (pvr)) + +/* + * IBM has further subdivided the standard PowerPC 16-bit version and + * revision subfields of the PVR for the PowerPC 403s into the following: + */ + +#define PVR_FAM(pvr) (((pvr) >> 20) & 0xFFF) /* Family field */ +#define PVR_MEM(pvr) (((pvr) >> 16) & 0xF) /* Member field */ +#define PVR_CORE(pvr) (((pvr) >> 12) & 0xF) /* Core field */ +#define PVR_CFG(pvr) (((pvr) >> 8) & 0xF) /* Configuration field */ +#define PVR_MAJ(pvr) (((pvr) >> 4) & 0xF) /* Major revision field */ +#define PVR_MIN(pvr) (((pvr) >> 0) & 0xF) /* Minor revision field */ + +/* Processor Version Numbers */ + +#define PVR_403GA 0x00200000 +#define PVR_403GB 0x00200100 +#define PVR_403GC 0x00200200 +#define PVR_403GCX 0x00201400 +#define PVR_405GP 0x40110000 +#define PVR_476 0x11a52000 +#define PVR_476FPE 0x7ff50000 +#define PVR_STB03XXX 0x40310000 +#define PVR_NP405H 0x41410000 +#define PVR_NP405L 0x41610000 +#define PVR_601 0x00010000 +#define PVR_602 0x00050000 +#define PVR_603 0x00030000 +#define PVR_603e 0x00060000 +#define PVR_603ev 0x00070000 +#define PVR_603r 0x00071000 +#define PVR_604 0x00040000 +#define PVR_604e 0x00090000 +#define PVR_604r 0x000A0000 +#define PVR_620 0x00140000 +#define PVR_740 0x00080000 +#define PVR_750 PVR_740 +#define PVR_740P 0x10080000 +#define PVR_750P PVR_740P +#define PVR_7400 0x000C0000 +#define PVR_7410 0x800C0000 +#define PVR_7450 0x80000000 +#define PVR_8540 0x80200000 +#define PVR_8560 0x80200000 +#define PVR_VER_E500V1 0x8020 +#define PVR_VER_E500V2 0x8021 +#define PVR_VER_E500MC 0x8023 +#define PVR_VER_E5500 0x8024 +#define PVR_VER_E6500 0x8040 + +/* + * For the 8xx processors, all of them report the same PVR family for + * the PowerPC core. The various versions of these processors must be + * differentiated by the version number in the Communication Processor + * Module (CPM). + */ +#define PVR_8xx 0x00500000 + +#define PVR_8240 0x00810100 +#define PVR_8245 0x80811014 +#define PVR_8260 PVR_8240 + +/* 476 Simulator seems to currently have the PVR of the 602... */ +#define PVR_476_ISS 0x00052000 + +/* 64-bit processors */ +#define PVR_NORTHSTAR 0x0033 +#define PVR_PULSAR 0x0034 +#define PVR_POWER4 0x0035 +#define PVR_ICESTAR 0x0036 +#define PVR_SSTAR 0x0037 +#define PVR_POWER4p 0x0038 +#define PVR_970 0x0039 +#define PVR_POWER5 0x003A +#define PVR_POWER5p 0x003B +#define PVR_970FX 0x003C +#define PVR_POWER6 0x003E +#define PVR_POWER7 0x003F +#define PVR_630 0x0040 +#define PVR_630p 0x0041 +#define PVR_970MP 0x0044 +#define PVR_970GX 0x0045 +#define PVR_POWER7p 0x004A +#define PVR_POWER8E 0x004B +#define PVR_POWER8NVL 0x004C +#define PVR_POWER8 0x004D +#define PVR_POWER9 0x004E +#define PVR_POWER10 0x0080 +#define PVR_BE 0x0070 +#define PVR_PA6T 0x0090 + +/* "Logical" PVR values defined in PAPR, representing architecture levels */ +#define PVR_ARCH_204 0x0f000001 +#define PVR_ARCH_205 0x0f000002 +#define PVR_ARCH_206 0x0f000003 +#define PVR_ARCH_206p 0x0f100003 +#define PVR_ARCH_207 0x0f000004 +#define PVR_ARCH_300 0x0f000005 +#define PVR_ARCH_31 0x0f000006 + +/* Macros for setting and retrieving special purpose registers */ +#ifndef __ASSEMBLY__ +#define mfmsr() ({unsigned long rval; \ + asm volatile("mfmsr %0" : "=r" (rval) : \ + : "memory"); rval;}) +#ifdef CONFIG_PPC_BOOK3S_64 +#define __mtmsrd(v, l) asm volatile("mtmsrd %0," __stringify(l) \ + : : "r" (v) : "memory") +#define mtmsr(v) __mtmsrd((v), 0) +#define __MTMSR "mtmsrd" +#else +#define mtmsr(v) asm volatile("mtmsr %0" : \ + : "r" ((unsigned long)(v)) \ + : "memory") +#define __MTMSR "mtmsr" +#endif + +static inline void mtmsr_isync(unsigned long val) +{ + asm volatile(__MTMSR " %0; " ASM_FTR_IFCLR("isync", "nop", %1) : : + "r" (val), "i" (CPU_FTR_ARCH_206) : "memory"); +} + +#define mfspr(rn) ({unsigned long rval; \ + asm volatile("mfspr %0," __stringify(rn) \ + : "=r" (rval)); rval;}) +#ifndef mtspr +#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : \ + : "r" ((unsigned long)(v)) \ + : "memory") +#endif +#define wrtspr(rn) asm volatile("mtspr " __stringify(rn) ",0" : \ + : : "memory") + +static inline void wrtee(unsigned long val) +{ + if (__builtin_constant_p(val)) + asm volatile("wrteei %0" : : "i" ((val & MSR_EE) ? 1 : 0) : "memory"); + else + asm volatile("wrtee %0" : : "r" (val) : "memory"); +} + +extern unsigned long msr_check_and_set(unsigned long bits); +extern bool strict_msr_control; +extern void __msr_check_and_clear(unsigned long bits); +static inline void msr_check_and_clear(unsigned long bits) +{ + if (strict_msr_control) + __msr_check_and_clear(bits); +} + +#if defined(CONFIG_PPC_CELL) || defined(CONFIG_E500) +#define mftb() ({unsigned long rval; \ + asm volatile( \ + "90: mfspr %0, %2;\n" \ + ASM_FTR_IFSET( \ + "97: cmpwi %0,0;\n" \ + " beq- 90b;\n", "", %1) \ + : "=r" (rval) \ + : "i" (CPU_FTR_CELL_TB_BUG), "i" (SPRN_TBRL) : "cr0"); \ + rval;}) +#elif defined(CONFIG_PPC_8xx) +#define mftb() ({unsigned long rval; \ + asm volatile("mftbl %0" : "=r" (rval)); rval;}) +#else +#define mftb() ({unsigned long rval; \ + asm volatile("mfspr %0, %1" : \ + "=r" (rval) : "i" (SPRN_TBRL)); rval;}) +#endif /* !CONFIG_PPC_CELL */ + +#if defined(CONFIG_PPC_8xx) +#define mftbu() ({unsigned long rval; \ + asm volatile("mftbu %0" : "=r" (rval)); rval;}) +#else +#define mftbu() ({unsigned long rval; \ + asm volatile("mfspr %0, %1" : "=r" (rval) : \ + "i" (SPRN_TBRU)); rval;}) +#endif + +#define mttbl(v) asm volatile("mttbl %0":: "r"(v)) +#define mttbu(v) asm volatile("mttbu %0":: "r"(v)) + +#ifdef CONFIG_PPC32 +#define mfsrin(v) ({unsigned int rval; \ + asm volatile("mfsrin %0,%1" : "=r" (rval) : "r" (v)); \ + rval;}) + +static inline void mtsrin(u32 val, u32 idx) +{ + asm volatile("mtsrin %0, %1" : : "r" (val), "r" (idx)); +} +#endif + +#define proc_trap() asm volatile("trap") + +extern unsigned long current_stack_frame(void); + +register unsigned long current_stack_pointer asm("r1"); + +extern unsigned long scom970_read(unsigned int address); +extern void scom970_write(unsigned int address, unsigned long value); + +struct pt_regs; + +extern void ppc_save_regs(struct pt_regs *regs); + +static inline void update_power8_hid0(unsigned long hid0) +{ + /* + * The HID0 update on Power8 should at the very least be + * preceded by a SYNC instruction followed by an ISYNC + * instruction + */ + asm volatile("sync; mtspr %0,%1; isync":: "i"(SPRN_HID0), "r"(hid0)); +} +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_REG_H */ diff --git a/arch/powerpc/include/asm/reg_8xx.h b/arch/powerpc/include/asm/reg_8xx.h new file mode 100644 index 000000000..299ee7be0 --- /dev/null +++ b/arch/powerpc/include/asm/reg_8xx.h @@ -0,0 +1,83 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Contains register definitions common to PowerPC 8xx CPUs. Notice + */ +#ifndef _ASM_POWERPC_REG_8xx_H +#define _ASM_POWERPC_REG_8xx_H + +/* Cache control on the MPC8xx is provided through some additional + * special purpose registers. + */ +#define SPRN_IC_CST 560 /* Instruction cache control/status */ +#define SPRN_IC_ADR 561 /* Address needed for some commands */ +#define SPRN_IC_DAT 562 /* Read-only data register */ +#define SPRN_DC_CST 568 /* Data cache control/status */ +#define SPRN_DC_ADR 569 /* Address needed for some commands */ +#define SPRN_DC_DAT 570 /* Read-only data register */ + +/* Misc Debug */ +#define SPRN_DPDR 630 +#define SPRN_MI_CAM 816 +#define SPRN_MI_RAM0 817 +#define SPRN_MI_RAM1 818 +#define SPRN_MD_CAM 824 +#define SPRN_MD_RAM0 825 +#define SPRN_MD_RAM1 826 + +/* Special MSR manipulation registers */ +#define SPRN_EIE 80 /* External interrupt enable (EE=1, RI=1) */ +#define SPRN_EID 81 /* External interrupt disable (EE=0, RI=1) */ +#define SPRN_NRI 82 /* Non recoverable interrupt (EE=0, RI=0) */ + +/* Debug registers */ +#define SPRN_CMPA 144 +#define SPRN_COUNTA 150 +#define SPRN_CMPE 152 +#define SPRN_CMPF 153 +#define SPRN_LCTRL1 156 +#define LCTRL1_CTE_GT 0xc0000000 +#define LCTRL1_CTF_LT 0x14000000 +#define LCTRL1_CRWE_RW 0x00000000 +#define LCTRL1_CRWE_RO 0x00040000 +#define LCTRL1_CRWE_WO 0x000c0000 +#define LCTRL1_CRWF_RW 0x00000000 +#define LCTRL1_CRWF_RO 0x00010000 +#define LCTRL1_CRWF_WO 0x00030000 +#define SPRN_LCTRL2 157 +#define LCTRL2_LW0EN 0x80000000 +#define LCTRL2_LW0LA_E 0x00000000 +#define LCTRL2_LW0LA_F 0x04000000 +#define LCTRL2_LW0LA_EandF 0x08000000 +#define LCTRL2_LW0LADC 0x02000000 +#define LCTRL2_SLW0EN 0x00000002 +#ifdef CONFIG_PPC_8xx +#define SPRN_ICTRL 158 +#endif +#define SPRN_BAR 159 + +/* Commands. Only the first few are available to the instruction cache. +*/ +#define IDC_ENABLE 0x02000000 /* Cache enable */ +#define IDC_DISABLE 0x04000000 /* Cache disable */ +#define IDC_LDLCK 0x06000000 /* Load and lock */ +#define IDC_UNLINE 0x08000000 /* Unlock line */ +#define IDC_UNALL 0x0a000000 /* Unlock all */ +#define IDC_INVALL 0x0c000000 /* Invalidate all */ + +#define DC_FLINE 0x0e000000 /* Flush data cache line */ +#define DC_SFWT 0x01000000 /* Set forced writethrough mode */ +#define DC_CFWT 0x03000000 /* Clear forced writethrough mode */ +#define DC_SLES 0x05000000 /* Set little endian swap mode */ +#define DC_CLES 0x07000000 /* Clear little endian swap mode */ + +/* Status. +*/ +#define IDC_ENABLED 0x80000000 /* Cache is enabled */ +#define IDC_CERR1 0x00200000 /* Cache error 1 */ +#define IDC_CERR2 0x00100000 /* Cache error 2 */ +#define IDC_CERR3 0x00080000 /* Cache error 3 */ + +#define DC_DFWT 0x40000000 /* Data cache is forced write through */ +#define DC_LES 0x20000000 /* Caches are little endian mode */ + +#endif /* _ASM_POWERPC_REG_8xx_H */ diff --git a/arch/powerpc/include/asm/reg_a2.h b/arch/powerpc/include/asm/reg_a2.h new file mode 100644 index 000000000..74fba29e9 --- /dev/null +++ b/arch/powerpc/include/asm/reg_a2.h @@ -0,0 +1,154 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Register definitions specific to the A2 core + * + * Copyright (C) 2008 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp. + */ + +#ifndef __ASM_POWERPC_REG_A2_H__ +#define __ASM_POWERPC_REG_A2_H__ + +#include <asm/asm-const.h> + +#define SPRN_TENSR 0x1b5 +#define SPRN_TENS 0x1b6 /* Thread ENable Set */ +#define SPRN_TENC 0x1b7 /* Thread ENable Clear */ + +#define SPRN_A2_CCR0 0x3f0 /* Core Configuration Register 0 */ +#define SPRN_A2_CCR1 0x3f1 /* Core Configuration Register 1 */ +#define SPRN_A2_CCR2 0x3f2 /* Core Configuration Register 2 */ +#define SPRN_MMUCR0 0x3fc /* MMU Control Register 0 */ +#define SPRN_MMUCR1 0x3fd /* MMU Control Register 1 */ +#define SPRN_MMUCR2 0x3fe /* MMU Control Register 2 */ +#define SPRN_MMUCR3 0x3ff /* MMU Control Register 3 */ + +#define SPRN_IAR 0x372 + +#define SPRN_IUCR0 0x3f3 +#define IUCR0_ICBI_ACK 0x1000 + +#define SPRN_XUCR0 0x3f6 /* Execution Unit Config Register 0 */ + +#define A2_IERAT_SIZE 16 +#define A2_DERAT_SIZE 32 + +/* A2 MMUCR0 bits */ +#define MMUCR0_ECL 0x80000000 /* Extended Class for TLB fills */ +#define MMUCR0_TID_NZ 0x40000000 /* TID is non-zero */ +#define MMUCR0_TS 0x10000000 /* Translation space for TLB fills */ +#define MMUCR0_TGS 0x20000000 /* Guest space for TLB fills */ +#define MMUCR0_TLBSEL 0x0c000000 /* TLB or ERAT target for TLB fills */ +#define MMUCR0_TLBSEL_U 0x00000000 /* TLBSEL = UTLB */ +#define MMUCR0_TLBSEL_I 0x08000000 /* TLBSEL = I-ERAT */ +#define MMUCR0_TLBSEL_D 0x0c000000 /* TLBSEL = D-ERAT */ +#define MMUCR0_LOCKSRSH 0x02000000 /* Use TLB lock on tlbsx. */ +#define MMUCR0_TID_MASK 0x000000ff /* TID field */ + +/* A2 MMUCR1 bits */ +#define MMUCR1_IRRE 0x80000000 /* I-ERAT round robin enable */ +#define MMUCR1_DRRE 0x40000000 /* D-ERAT round robin enable */ +#define MMUCR1_REE 0x20000000 /* Reference Exception Enable*/ +#define MMUCR1_CEE 0x10000000 /* Change exception enable */ +#define MMUCR1_CSINV_ALL 0x00000000 /* Inval ERAT on all CS evts */ +#define MMUCR1_CSINV_NISYNC 0x04000000 /* Inval ERAT on all ex isync*/ +#define MMUCR1_CSINV_NEVER 0x0c000000 /* Don't inval ERAT on CS */ +#define MMUCR1_ICTID 0x00080000 /* IERAT class field as TID */ +#define MMUCR1_ITTID 0x00040000 /* IERAT thdid field as TID */ +#define MMUCR1_DCTID 0x00020000 /* DERAT class field as TID */ +#define MMUCR1_DTTID 0x00010000 /* DERAT thdid field as TID */ +#define MMUCR1_DCCD 0x00008000 /* DERAT class ignore */ +#define MMUCR1_TLBWE_BINV 0x00004000 /* back invalidate on tlbwe */ + +/* A2 MMUCR2 bits */ +#define MMUCR2_PSSEL_SHIFT 4 + +/* A2 MMUCR3 bits */ +#define MMUCR3_THID 0x0000000f /* Thread ID */ + +/* *** ERAT TLB bits definitions */ +#define TLB0_EPN_MASK ASM_CONST(0xfffffffffffff000) +#define TLB0_CLASS_MASK ASM_CONST(0x0000000000000c00) +#define TLB0_CLASS_00 ASM_CONST(0x0000000000000000) +#define TLB0_CLASS_01 ASM_CONST(0x0000000000000400) +#define TLB0_CLASS_10 ASM_CONST(0x0000000000000800) +#define TLB0_CLASS_11 ASM_CONST(0x0000000000000c00) +#define TLB0_V ASM_CONST(0x0000000000000200) +#define TLB0_X ASM_CONST(0x0000000000000100) +#define TLB0_SIZE_MASK ASM_CONST(0x00000000000000f0) +#define TLB0_SIZE_4K ASM_CONST(0x0000000000000010) +#define TLB0_SIZE_64K ASM_CONST(0x0000000000000030) +#define TLB0_SIZE_1M ASM_CONST(0x0000000000000050) +#define TLB0_SIZE_16M ASM_CONST(0x0000000000000070) +#define TLB0_SIZE_1G ASM_CONST(0x00000000000000a0) +#define TLB0_THDID_MASK ASM_CONST(0x000000000000000f) +#define TLB0_THDID_0 ASM_CONST(0x0000000000000001) +#define TLB0_THDID_1 ASM_CONST(0x0000000000000002) +#define TLB0_THDID_2 ASM_CONST(0x0000000000000004) +#define TLB0_THDID_3 ASM_CONST(0x0000000000000008) +#define TLB0_THDID_ALL ASM_CONST(0x000000000000000f) + +#define TLB1_RESVATTR ASM_CONST(0x00f0000000000000) +#define TLB1_U0 ASM_CONST(0x0008000000000000) +#define TLB1_U1 ASM_CONST(0x0004000000000000) +#define TLB1_U2 ASM_CONST(0x0002000000000000) +#define TLB1_U3 ASM_CONST(0x0001000000000000) +#define TLB1_R ASM_CONST(0x0000800000000000) +#define TLB1_C ASM_CONST(0x0000400000000000) +#define TLB1_RPN_MASK ASM_CONST(0x000003fffffff000) +#define TLB1_W ASM_CONST(0x0000000000000800) +#define TLB1_I ASM_CONST(0x0000000000000400) +#define TLB1_M ASM_CONST(0x0000000000000200) +#define TLB1_G ASM_CONST(0x0000000000000100) +#define TLB1_E ASM_CONST(0x0000000000000080) +#define TLB1_VF ASM_CONST(0x0000000000000040) +#define TLB1_UX ASM_CONST(0x0000000000000020) +#define TLB1_SX ASM_CONST(0x0000000000000010) +#define TLB1_UW ASM_CONST(0x0000000000000008) +#define TLB1_SW ASM_CONST(0x0000000000000004) +#define TLB1_UR ASM_CONST(0x0000000000000002) +#define TLB1_SR ASM_CONST(0x0000000000000001) + +/* A2 erativax attributes definitions */ +#define ERATIVAX_RS_IS_ALL 0x000 +#define ERATIVAX_RS_IS_TID 0x040 +#define ERATIVAX_RS_IS_CLASS 0x080 +#define ERATIVAX_RS_IS_FULLMATCH 0x0c0 +#define ERATIVAX_CLASS_00 0x000 +#define ERATIVAX_CLASS_01 0x010 +#define ERATIVAX_CLASS_10 0x020 +#define ERATIVAX_CLASS_11 0x030 +#define ERATIVAX_PSIZE_4K (TLB_PSIZE_4K >> 1) +#define ERATIVAX_PSIZE_64K (TLB_PSIZE_64K >> 1) +#define ERATIVAX_PSIZE_1M (TLB_PSIZE_1M >> 1) +#define ERATIVAX_PSIZE_16M (TLB_PSIZE_16M >> 1) +#define ERATIVAX_PSIZE_1G (TLB_PSIZE_1G >> 1) + +/* A2 eratilx attributes definitions */ +#define ERATILX_T_ALL 0 +#define ERATILX_T_TID 1 +#define ERATILX_T_TGS 2 +#define ERATILX_T_FULLMATCH 3 +#define ERATILX_T_CLASS0 4 +#define ERATILX_T_CLASS1 5 +#define ERATILX_T_CLASS2 6 +#define ERATILX_T_CLASS3 7 + +/* XUCR0 bits */ +#define XUCR0_TRACE_UM_T0 0x40000000 /* Thread 0 */ +#define XUCR0_TRACE_UM_T1 0x20000000 /* Thread 1 */ +#define XUCR0_TRACE_UM_T2 0x10000000 /* Thread 2 */ +#define XUCR0_TRACE_UM_T3 0x08000000 /* Thread 3 */ + +/* A2 CCR0 register */ +#define A2_CCR0_PME_DISABLED 0x00000000 +#define A2_CCR0_PME_SLEEP 0x40000000 +#define A2_CCR0_PME_RVW 0x80000000 +#define A2_CCR0_PME_DISABLED2 0xc0000000 + +/* A2 CCR2 register */ +#define A2_CCR2_ERAT_ONLY_MODE 0x00000001 +#define A2_CCR2_ENABLE_ICSWX 0x00000002 +#define A2_CCR2_ENABLE_PC 0x20000000 +#define A2_CCR2_ENABLE_TRACE 0x40000000 + +#endif /* __ASM_POWERPC_REG_A2_H__ */ diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h new file mode 100644 index 000000000..29a948e0c --- /dev/null +++ b/arch/powerpc/include/asm/reg_booke.h @@ -0,0 +1,709 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Contains register definitions common to the Book E PowerPC + * specification. Notice that while the IBM-40x series of CPUs + * are not true Book E PowerPCs, they borrowed a number of features + * before Book E was finalized, and are included here as well. Unfortunately, + * they sometimes used different locations than true Book E CPUs did. + * + * Copyright 2009-2010 Freescale Semiconductor, Inc. + */ +#ifdef __KERNEL__ +#ifndef __ASM_POWERPC_REG_BOOKE_H__ +#define __ASM_POWERPC_REG_BOOKE_H__ + +#include <asm/ppc-opcode.h> + +/* Machine State Register (MSR) Fields */ +#define MSR_GS_LG 28 /* Guest state */ +#define MSR_UCLE_LG 26 /* User-mode cache lock enable */ +#define MSR_SPE_LG 25 /* Enable SPE */ +#define MSR_DWE_LG 10 /* Debug Wait Enable */ +#define MSR_UBLE_LG 10 /* BTB lock enable (e500) */ +#define MSR_IS_LG MSR_IR_LG /* Instruction Space */ +#define MSR_DS_LG MSR_DR_LG /* Data Space */ +#define MSR_PMM_LG 2 /* Performance monitor mark bit */ +#define MSR_CM_LG 31 /* Computation Mode (0=32-bit, 1=64-bit) */ + +#define MSR_GS __MASK(MSR_GS_LG) +#define MSR_UCLE __MASK(MSR_UCLE_LG) +#define MSR_SPE __MASK(MSR_SPE_LG) +#define MSR_DWE __MASK(MSR_DWE_LG) +#define MSR_UBLE __MASK(MSR_UBLE_LG) +#define MSR_IS __MASK(MSR_IS_LG) +#define MSR_DS __MASK(MSR_DS_LG) +#define MSR_PMM __MASK(MSR_PMM_LG) +#define MSR_CM __MASK(MSR_CM_LG) + +#if defined(CONFIG_PPC_BOOK3E_64) +#define MSR_64BIT MSR_CM + +#define MSR_ (MSR_ME | MSR_RI | MSR_CE) +#define MSR_KERNEL (MSR_ | MSR_64BIT) +#define MSR_USER32 (MSR_ | MSR_PR | MSR_EE) +#define MSR_USER64 (MSR_USER32 | MSR_64BIT) +#elif defined (CONFIG_40x) +#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE) +#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) +#else +#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_CE) +#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE) +#endif + +/* Special Purpose Registers (SPRNs)*/ +#define SPRN_DECAR 0x036 /* Decrementer Auto Reload Register */ +#define SPRN_IVPR 0x03F /* Interrupt Vector Prefix Register */ +#define SPRN_USPRG0 0x100 /* User Special Purpose Register General 0 */ +#define SPRN_SPRG3R 0x103 /* Special Purpose Register General 3 Read */ +#define SPRN_SPRG4R 0x104 /* Special Purpose Register General 4 Read */ +#define SPRN_SPRG5R 0x105 /* Special Purpose Register General 5 Read */ +#define SPRN_SPRG6R 0x106 /* Special Purpose Register General 6 Read */ +#define SPRN_SPRG7R 0x107 /* Special Purpose Register General 7 Read */ +#define SPRN_SPRG4W 0x114 /* Special Purpose Register General 4 Write */ +#define SPRN_SPRG5W 0x115 /* Special Purpose Register General 5 Write */ +#define SPRN_SPRG6W 0x116 /* Special Purpose Register General 6 Write */ +#define SPRN_SPRG7W 0x117 /* Special Purpose Register General 7 Write */ +#define SPRN_EPCR 0x133 /* Embedded Processor Control Register */ +#define SPRN_DBCR2 0x136 /* Debug Control Register 2 */ +#define SPRN_DBCR4 0x233 /* Debug Control Register 4 */ +#define SPRN_MSRP 0x137 /* MSR Protect Register */ +#define SPRN_IAC3 0x13A /* Instruction Address Compare 3 */ +#define SPRN_IAC4 0x13B /* Instruction Address Compare 4 */ +#define SPRN_DVC1 0x13E /* Data Value Compare Register 1 */ +#define SPRN_DVC2 0x13F /* Data Value Compare Register 2 */ +#define SPRN_LPID 0x152 /* Logical Partition ID */ +#define SPRN_MAS8 0x155 /* MMU Assist Register 8 */ +#define SPRN_TLB0PS 0x158 /* TLB 0 Page Size Register */ +#define SPRN_TLB1PS 0x159 /* TLB 1 Page Size Register */ +#define SPRN_MAS5_MAS6 0x15c /* MMU Assist Register 5 || 6 */ +#define SPRN_MAS8_MAS1 0x15d /* MMU Assist Register 8 || 1 */ +#define SPRN_EPTCFG 0x15e /* Embedded Page Table Config */ +#define SPRN_GSPRG0 0x170 /* Guest SPRG0 */ +#define SPRN_GSPRG1 0x171 /* Guest SPRG1 */ +#define SPRN_GSPRG2 0x172 /* Guest SPRG2 */ +#define SPRN_GSPRG3 0x173 /* Guest SPRG3 */ +#define SPRN_MAS7_MAS3 0x174 /* MMU Assist Register 7 || 3 */ +#define SPRN_MAS0_MAS1 0x175 /* MMU Assist Register 0 || 1 */ +#define SPRN_GSRR0 0x17A /* Guest SRR0 */ +#define SPRN_GSRR1 0x17B /* Guest SRR1 */ +#define SPRN_GEPR 0x17C /* Guest EPR */ +#define SPRN_GDEAR 0x17D /* Guest DEAR */ +#define SPRN_GPIR 0x17E /* Guest PIR */ +#define SPRN_GESR 0x17F /* Guest Exception Syndrome Register */ +#define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */ +#define SPRN_IVOR1 0x191 /* Interrupt Vector Offset Register 1 */ +#define SPRN_IVOR2 0x192 /* Interrupt Vector Offset Register 2 */ +#define SPRN_IVOR3 0x193 /* Interrupt Vector Offset Register 3 */ +#define SPRN_IVOR4 0x194 /* Interrupt Vector Offset Register 4 */ +#define SPRN_IVOR5 0x195 /* Interrupt Vector Offset Register 5 */ +#define SPRN_IVOR6 0x196 /* Interrupt Vector Offset Register 6 */ +#define SPRN_IVOR7 0x197 /* Interrupt Vector Offset Register 7 */ +#define SPRN_IVOR8 0x198 /* Interrupt Vector Offset Register 8 */ +#define SPRN_IVOR9 0x199 /* Interrupt Vector Offset Register 9 */ +#define SPRN_IVOR10 0x19A /* Interrupt Vector Offset Register 10 */ +#define SPRN_IVOR11 0x19B /* Interrupt Vector Offset Register 11 */ +#define SPRN_IVOR12 0x19C /* Interrupt Vector Offset Register 12 */ +#define SPRN_IVOR13 0x19D /* Interrupt Vector Offset Register 13 */ +#define SPRN_IVOR14 0x19E /* Interrupt Vector Offset Register 14 */ +#define SPRN_IVOR15 0x19F /* Interrupt Vector Offset Register 15 */ +#define SPRN_IVOR38 0x1B0 /* Interrupt Vector Offset Register 38 */ +#define SPRN_IVOR39 0x1B1 /* Interrupt Vector Offset Register 39 */ +#define SPRN_IVOR40 0x1B2 /* Interrupt Vector Offset Register 40 */ +#define SPRN_IVOR41 0x1B3 /* Interrupt Vector Offset Register 41 */ +#define SPRN_IVOR42 0x1B4 /* Interrupt Vector Offset Register 42 */ +#define SPRN_GIVOR2 0x1B8 /* Guest IVOR2 */ +#define SPRN_GIVOR3 0x1B9 /* Guest IVOR3 */ +#define SPRN_GIVOR4 0x1BA /* Guest IVOR4 */ +#define SPRN_GIVOR8 0x1BB /* Guest IVOR8 */ +#define SPRN_GIVOR13 0x1BC /* Guest IVOR13 */ +#define SPRN_GIVOR14 0x1BD /* Guest IVOR14 */ +#define SPRN_GIVPR 0x1BF /* Guest IVPR */ +#define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */ +#define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */ +#define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */ +#define SPRN_L1CFG0 0x203 /* L1 Cache Configure Register 0 */ +#define SPRN_L1CFG1 0x204 /* L1 Cache Configure Register 1 */ +#define SPRN_ATB 0x20E /* Alternate Time Base */ +#define SPRN_ATBL 0x20E /* Alternate Time Base Lower */ +#define SPRN_ATBU 0x20F /* Alternate Time Base Upper */ +#define SPRN_IVOR32 0x210 /* Interrupt Vector Offset Register 32 */ +#define SPRN_IVOR33 0x211 /* Interrupt Vector Offset Register 33 */ +#define SPRN_IVOR34 0x212 /* Interrupt Vector Offset Register 34 */ +#define SPRN_IVOR35 0x213 /* Interrupt Vector Offset Register 35 */ +#define SPRN_IVOR36 0x214 /* Interrupt Vector Offset Register 36 */ +#define SPRN_IVOR37 0x215 /* Interrupt Vector Offset Register 37 */ +#define SPRN_MCARU 0x239 /* Machine Check Address Register Upper */ +#define SPRN_MCSRR0 0x23A /* Machine Check Save and Restore Register 0 */ +#define SPRN_MCSRR1 0x23B /* Machine Check Save and Restore Register 1 */ +#define SPRN_MCSR 0x23C /* Machine Check Status Register */ +#define SPRN_MCAR 0x23D /* Machine Check Address Register */ +#define SPRN_DSRR0 0x23E /* Debug Save and Restore Register 0 */ +#define SPRN_DSRR1 0x23F /* Debug Save and Restore Register 1 */ +#define SPRN_SPRG8 0x25C /* Special Purpose Register General 8 */ +#define SPRN_SPRG9 0x25D /* Special Purpose Register General 9 */ +#define SPRN_L1CSR2 0x25E /* L1 Cache Control and Status Register 2 */ +#define SPRN_MAS0 0x270 /* MMU Assist Register 0 */ +#define SPRN_MAS1 0x271 /* MMU Assist Register 1 */ +#define SPRN_MAS2 0x272 /* MMU Assist Register 2 */ +#define SPRN_MAS3 0x273 /* MMU Assist Register 3 */ +#define SPRN_MAS4 0x274 /* MMU Assist Register 4 */ +#define SPRN_MAS5 0x153 /* MMU Assist Register 5 */ +#define SPRN_MAS6 0x276 /* MMU Assist Register 6 */ +#define SPRN_PID1 0x279 /* Process ID Register 1 */ +#define SPRN_PID2 0x27A /* Process ID Register 2 */ +#define SPRN_TLB0CFG 0x2B0 /* TLB 0 Config Register */ +#define SPRN_TLB1CFG 0x2B1 /* TLB 1 Config Register */ +#define SPRN_TLB2CFG 0x2B2 /* TLB 2 Config Register */ +#define SPRN_TLB3CFG 0x2B3 /* TLB 3 Config Register */ +#define SPRN_EPR 0x2BE /* External Proxy Register */ +#define SPRN_CCR1 0x378 /* Core Configuration Register 1 */ +#define SPRN_ZPR 0x3B0 /* Zone Protection Register (40x) */ +#define SPRN_MAS7 0x3B0 /* MMU Assist Register 7 */ +#define SPRN_MMUCR 0x3B2 /* MMU Control Register */ +#define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */ +#define SPRN_EPLC 0x3B3 /* External Process ID Load Context */ +#define SPRN_EPSC 0x3B4 /* External Process ID Store Context */ +#define SPRN_SGR 0x3B9 /* Storage Guarded Register */ +#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */ +#define SPRN_SLER 0x3BB /* Little-endian real mode */ +#define SPRN_SU0R 0x3BC /* "User 0" real mode (40x) */ +#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */ +#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */ +#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */ +#define SPRN_L1CSR0 0x3F2 /* L1 Cache Control and Status Register 0 */ +#define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */ +#define SPRN_MMUCSR0 0x3F4 /* MMU Control and Status Register 0 */ +#define SPRN_MMUCFG 0x3F7 /* MMU Configuration Register */ +#define SPRN_BUCSR 0x3F5 /* Branch Unit Control and Status */ +#define SPRN_L2CSR0 0x3F9 /* L2 Data Cache Control and Status Register 0 */ +#define SPRN_L2CSR1 0x3FA /* L2 Data Cache Control and Status Register 1 */ +#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */ +#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */ +#define SPRN_PWRMGTCR0 0x3FB /* Power management control register 0 */ +#define SPRN_SVR 0x3FF /* System Version Register */ + +/* + * SPRs which have conflicting definitions on true Book E versus classic, + * or IBM 40x. + */ +#ifdef CONFIG_BOOKE +#define SPRN_CSRR0 0x03A /* Critical Save and Restore Register 0 */ +#define SPRN_CSRR1 0x03B /* Critical Save and Restore Register 1 */ +#define SPRN_DEAR 0x03D /* Data Error Address Register */ +#define SPRN_ESR 0x03E /* Exception Syndrome Register */ +#define SPRN_PIR 0x11E /* Processor Identification Register */ +#define SPRN_DBSR 0x130 /* Debug Status Register */ +#define SPRN_DBCR0 0x134 /* Debug Control Register 0 */ +#define SPRN_DBCR1 0x135 /* Debug Control Register 1 */ +#define SPRN_IAC1 0x138 /* Instruction Address Compare 1 */ +#define SPRN_IAC2 0x139 /* Instruction Address Compare 2 */ +#define SPRN_DAC1 0x13C /* Data Address Compare 1 */ +#define SPRN_DAC2 0x13D /* Data Address Compare 2 */ +#define SPRN_TSR 0x150 /* Timer Status Register */ +#define SPRN_TCR 0x154 /* Timer Control Register */ +#endif /* Book E */ +#ifdef CONFIG_40x +#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */ +#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */ +#define SPRN_DEAR 0x3D5 /* Data Error Address Register */ +#define SPRN_TSR 0x3D8 /* Timer Status Register */ +#define SPRN_TCR 0x3DA /* Timer Control Register */ +#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */ +#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */ +#define SPRN_DBSR 0x3F0 /* Debug Status Register */ +#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */ +#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */ +#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */ +#define SPRN_CSRR0 SPRN_SRR2 /* Critical Save and Restore Register 0 */ +#define SPRN_CSRR1 SPRN_SRR3 /* Critical Save and Restore Register 1 */ +#endif +#define SPRN_HACOP 0x15F /* Hypervisor Available Coprocessor Register */ + +/* Bit definitions for CCR1. */ +#define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */ +#define CCR1_TCS 0x00000080 /* Timer Clock Select */ + +/* Bit definitions for PWRMGTCR0. */ +#define PWRMGTCR0_PW20_WAIT (1 << 14) /* PW20 state enable bit */ +#define PWRMGTCR0_PW20_ENT_SHIFT 8 +#define PWRMGTCR0_PW20_ENT 0x3F00 +#define PWRMGTCR0_AV_IDLE_PD_EN (1 << 22) /* Altivec idle enable */ +#define PWRMGTCR0_AV_IDLE_CNT_SHIFT 16 +#define PWRMGTCR0_AV_IDLE_CNT 0x3F0000 + +/* Bit definitions for the MCSR. */ +#define MCSR_MCS 0x80000000 /* Machine Check Summary */ +#define MCSR_IB 0x40000000 /* Instruction PLB Error */ +#define MCSR_DRB 0x20000000 /* Data Read PLB Error */ +#define MCSR_DWB 0x10000000 /* Data Write PLB Error */ +#define MCSR_TLBP 0x08000000 /* TLB Parity Error */ +#define MCSR_ICP 0x04000000 /* I-Cache Parity Error */ +#define MCSR_DCSP 0x02000000 /* D-Cache Search Parity Error */ +#define MCSR_DCFP 0x01000000 /* D-Cache Flush Parity Error */ +#define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */ + +#define PPC47x_MCSR_GPR 0x01000000 /* GPR parity error */ +#define PPC47x_MCSR_FPR 0x00800000 /* FPR parity error */ +#define PPC47x_MCSR_IPR 0x00400000 /* Imprecise Machine Check Exception */ + +#ifdef CONFIG_E500 +/* All e500 */ +#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */ +#define MCSR_ICPERR 0x40000000UL /* I-Cache Parity Error */ + +/* e500v1/v2 */ +#define MCSR_DCP_PERR 0x20000000UL /* D-Cache Push Parity Error */ +#define MCSR_DCPERR 0x10000000UL /* D-Cache Parity Error */ +#define MCSR_BUS_IAERR 0x00000080UL /* Instruction Address Error */ +#define MCSR_BUS_RAERR 0x00000040UL /* Read Address Error */ +#define MCSR_BUS_WAERR 0x00000020UL /* Write Address Error */ +#define MCSR_BUS_IBERR 0x00000010UL /* Instruction Data Error */ +#define MCSR_BUS_RBERR 0x00000008UL /* Read Data Bus Error */ +#define MCSR_BUS_WBERR 0x00000004UL /* Write Data Bus Error */ +#define MCSR_BUS_IPERR 0x00000002UL /* Instruction parity Error */ +#define MCSR_BUS_RPERR 0x00000001UL /* Read parity Error */ + +/* e500mc */ +#define MCSR_DCPERR_MC 0x20000000UL /* D-Cache Parity Error */ +#define MCSR_L2MMU_MHIT 0x08000000UL /* Hit on multiple TLB entries */ +#define MCSR_NMI 0x00100000UL /* Non-Maskable Interrupt */ +#define MCSR_MAV 0x00080000UL /* MCAR address valid */ +#define MCSR_MEA 0x00040000UL /* MCAR is effective address */ +#define MCSR_IF 0x00010000UL /* Instruction Fetch */ +#define MCSR_LD 0x00008000UL /* Load */ +#define MCSR_ST 0x00004000UL /* Store */ +#define MCSR_LDG 0x00002000UL /* Guarded Load */ +#define MCSR_TLBSYNC 0x00000002UL /* Multiple tlbsyncs detected */ +#define MCSR_BSL2_ERR 0x00000001UL /* Backside L2 cache error */ + +#define MSRP_UCLEP 0x04000000 /* Protect MSR[UCLE] */ +#define MSRP_DEP 0x00000200 /* Protect MSR[DE] */ +#define MSRP_PMMP 0x00000004 /* Protect MSR[PMM] */ +#endif + +#ifdef CONFIG_E200 +#define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */ +#define MCSR_CP_PERR 0x20000000UL /* Cache Push Parity Error */ +#define MCSR_CPERR 0x10000000UL /* Cache Parity Error */ +#define MCSR_EXCP_ERR 0x08000000UL /* ISI, ITLB, or Bus Error on 1st insn + fetch for an exception handler */ +#define MCSR_BUS_IRERR 0x00000010UL /* Read Bus Error on instruction fetch*/ +#define MCSR_BUS_DRERR 0x00000008UL /* Read Bus Error on data load */ +#define MCSR_BUS_WRERR 0x00000004UL /* Write Bus Error on buffered + store or cache line push */ +#endif + +/* Bit definitions for the HID1 */ +#ifdef CONFIG_E500 +/* e500v1/v2 */ +#define HID1_PLL_CFG_MASK 0xfc000000 /* PLL_CFG input pins */ +#define HID1_RFXE 0x00020000 /* Read fault exception enable */ +#define HID1_R1DPE 0x00008000 /* R1 data bus parity enable */ +#define HID1_R2DPE 0x00004000 /* R2 data bus parity enable */ +#define HID1_ASTME 0x00002000 /* Address bus streaming mode enable */ +#define HID1_ABE 0x00001000 /* Address broadcast enable */ +#define HID1_MPXTT 0x00000400 /* MPX re-map transfer type */ +#define HID1_ATS 0x00000080 /* Atomic status */ +#define HID1_MID_MASK 0x0000000f /* MID input pins */ +#endif + +/* Bit definitions for the DBSR. */ +/* + * DBSR bits which have conflicting definitions on true Book E versus IBM 40x. + */ +#ifdef CONFIG_BOOKE +#define DBSR_IDE 0x80000000 /* Imprecise Debug Event */ +#define DBSR_MRR 0x30000000 /* Most Recent Reset */ +#define DBSR_IC 0x08000000 /* Instruction Completion */ +#define DBSR_BT 0x04000000 /* Branch Taken */ +#define DBSR_IRPT 0x02000000 /* Exception Debug Event */ +#define DBSR_TIE 0x01000000 /* Trap Instruction Event */ +#define DBSR_IAC1 0x00800000 /* Instr Address Compare 1 Event */ +#define DBSR_IAC2 0x00400000 /* Instr Address Compare 2 Event */ +#define DBSR_IAC3 0x00200000 /* Instr Address Compare 3 Event */ +#define DBSR_IAC4 0x00100000 /* Instr Address Compare 4 Event */ +#define DBSR_DAC1R 0x00080000 /* Data Addr Compare 1 Read Event */ +#define DBSR_DAC1W 0x00040000 /* Data Addr Compare 1 Write Event */ +#define DBSR_DAC2R 0x00020000 /* Data Addr Compare 2 Read Event */ +#define DBSR_DAC2W 0x00010000 /* Data Addr Compare 2 Write Event */ +#define DBSR_RET 0x00008000 /* Return Debug Event */ +#define DBSR_CIRPT 0x00000040 /* Critical Interrupt Taken Event */ +#define DBSR_CRET 0x00000020 /* Critical Return Debug Event */ +#define DBSR_IAC12ATS 0x00000002 /* Instr Address Compare 1/2 Toggle */ +#define DBSR_IAC34ATS 0x00000001 /* Instr Address Compare 3/4 Toggle */ +#endif +#ifdef CONFIG_40x +#define DBSR_IC 0x80000000 /* Instruction Completion */ +#define DBSR_BT 0x40000000 /* Branch taken */ +#define DBSR_IRPT 0x20000000 /* Exception Debug Event */ +#define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */ +#define DBSR_IAC1 0x04000000 /* Instruction Address Compare 1 Event */ +#define DBSR_IAC2 0x02000000 /* Instruction Address Compare 2 Event */ +#define DBSR_IAC3 0x00080000 /* Instruction Address Compare 3 Event */ +#define DBSR_IAC4 0x00040000 /* Instruction Address Compare 4 Event */ +#define DBSR_DAC1R 0x01000000 /* Data Address Compare 1 Read Event */ +#define DBSR_DAC1W 0x00800000 /* Data Address Compare 1 Write Event */ +#define DBSR_DAC2R 0x00400000 /* Data Address Compare 2 Read Event */ +#define DBSR_DAC2W 0x00200000 /* Data Address Compare 2 Write Event */ +#endif + +/* Bit definitions related to the ESR. */ +#define ESR_MCI 0x80000000 /* Machine Check - Instruction */ +#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */ +#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */ +#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */ +#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */ +#define ESR_PIL 0x08000000 /* Program Exception - Illegal */ +#define ESR_PPR 0x04000000 /* Program Exception - Privileged */ +#define ESR_PTR 0x02000000 /* Program Exception - Trap */ +#define ESR_FP 0x01000000 /* Floating Point Operation */ +#define ESR_DST 0x00800000 /* Storage Exception - Data miss */ +#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */ +#define ESR_ST 0x00800000 /* Store Operation */ +#define ESR_DLK 0x00200000 /* Data Cache Locking */ +#define ESR_ILK 0x00100000 /* Instr. Cache Locking */ +#define ESR_PUO 0x00040000 /* Unimplemented Operation exception */ +#define ESR_BO 0x00020000 /* Byte Ordering */ +#define ESR_SPV 0x00000080 /* Signal Processing operation */ + +/* Bit definitions related to the DBCR0. */ +#if defined(CONFIG_40x) +#define DBCR0_EDM 0x80000000 /* External Debug Mode */ +#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ +#define DBCR0_RST 0x30000000 /* all the bits in the RST field */ +#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */ +#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */ +#define DBCR0_RST_CORE 0x10000000 /* Core Reset */ +#define DBCR0_RST_NONE 0x00000000 /* No Reset */ +#define DBCR0_IC 0x08000000 /* Instruction Completion */ +#define DBCR0_ICMP DBCR0_IC +#define DBCR0_BT 0x04000000 /* Branch Taken */ +#define DBCR0_BRT DBCR0_BT +#define DBCR0_EDE 0x02000000 /* Exception Debug Event */ +#define DBCR0_IRPT DBCR0_EDE +#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ +#define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */ +#define DBCR0_IAC1 DBCR0_IA1 +#define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */ +#define DBCR0_IAC2 DBCR0_IA2 +#define DBCR0_IA12 0x00200000 /* Instr Addr 1-2 range enable */ +#define DBCR0_IA12X 0x00100000 /* Instr Addr 1-2 range eXclusive */ +#define DBCR0_IA3 0x00080000 /* Instr Addr compare 3 enable */ +#define DBCR0_IAC3 DBCR0_IA3 +#define DBCR0_IA4 0x00040000 /* Instr Addr compare 4 enable */ +#define DBCR0_IAC4 DBCR0_IA4 +#define DBCR0_IA34 0x00020000 /* Instr Addr 3-4 range Enable */ +#define DBCR0_IA34X 0x00010000 /* Instr Addr 3-4 range eXclusive */ +#define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */ +#define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */ +#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ + +#define dbcr_iac_range(task) ((task)->thread.debug.dbcr0) +#define DBCR_IAC12I DBCR0_IA12 /* Range Inclusive */ +#define DBCR_IAC12X (DBCR0_IA12 | DBCR0_IA12X) /* Range Exclusive */ +#define DBCR_IAC12MODE (DBCR0_IA12 | DBCR0_IA12X) /* IAC 1-2 Mode Bits */ +#define DBCR_IAC34I DBCR0_IA34 /* Range Inclusive */ +#define DBCR_IAC34X (DBCR0_IA34 | DBCR0_IA34X) /* Range Exclusive */ +#define DBCR_IAC34MODE (DBCR0_IA34 | DBCR0_IA34X) /* IAC 3-4 Mode Bits */ + +/* Bit definitions related to the DBCR1. */ +#define DBCR1_DAC1R 0x80000000 /* DAC1 Read Debug Event */ +#define DBCR1_DAC2R 0x40000000 /* DAC2 Read Debug Event */ +#define DBCR1_DAC1W 0x20000000 /* DAC1 Write Debug Event */ +#define DBCR1_DAC2W 0x10000000 /* DAC2 Write Debug Event */ + +#define dbcr_dac(task) ((task)->thread.debug.dbcr1) +#define DBCR_DAC1R DBCR1_DAC1R +#define DBCR_DAC1W DBCR1_DAC1W +#define DBCR_DAC2R DBCR1_DAC2R +#define DBCR_DAC2W DBCR1_DAC2W + +/* + * Are there any active Debug Events represented in the + * Debug Control Registers? + */ +#define DBCR0_ACTIVE_EVENTS (DBCR0_ICMP | DBCR0_IAC1 | DBCR0_IAC2 | \ + DBCR0_IAC3 | DBCR0_IAC4) +#define DBCR1_ACTIVE_EVENTS (DBCR1_DAC1R | DBCR1_DAC2R | \ + DBCR1_DAC1W | DBCR1_DAC2W) +#define DBCR_ACTIVE_EVENTS(dbcr0, dbcr1) (((dbcr0) & DBCR0_ACTIVE_EVENTS) || \ + ((dbcr1) & DBCR1_ACTIVE_EVENTS)) + +#elif defined(CONFIG_BOOKE) +#define DBCR0_EDM 0x80000000 /* External Debug Mode */ +#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ +#define DBCR0_RST 0x30000000 /* all the bits in the RST field */ +/* DBCR0_RST_* is 44x specific and not followed in fsl booke */ +#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */ +#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */ +#define DBCR0_RST_CORE 0x10000000 /* Core Reset */ +#define DBCR0_RST_NONE 0x00000000 /* No Reset */ +#define DBCR0_ICMP 0x08000000 /* Instruction Completion */ +#define DBCR0_IC DBCR0_ICMP +#define DBCR0_BRT 0x04000000 /* Branch Taken */ +#define DBCR0_BT DBCR0_BRT +#define DBCR0_IRPT 0x02000000 /* Exception Debug Event */ +#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ +#define DBCR0_TIE DBCR0_TDE +#define DBCR0_IAC1 0x00800000 /* Instr Addr compare 1 enable */ +#define DBCR0_IAC2 0x00400000 /* Instr Addr compare 2 enable */ +#define DBCR0_IAC3 0x00200000 /* Instr Addr compare 3 enable */ +#define DBCR0_IAC4 0x00100000 /* Instr Addr compare 4 enable */ +#define DBCR0_DAC1R 0x00080000 /* DAC 1 Read enable */ +#define DBCR0_DAC1W 0x00040000 /* DAC 1 Write enable */ +#define DBCR0_DAC2R 0x00020000 /* DAC 2 Read enable */ +#define DBCR0_DAC2W 0x00010000 /* DAC 2 Write enable */ +#define DBCR0_RET 0x00008000 /* Return Debug Event */ +#define DBCR0_CIRPT 0x00000040 /* Critical Interrupt Taken Event */ +#define DBCR0_CRET 0x00000020 /* Critical Return Debug Event */ +#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ + +#define dbcr_dac(task) ((task)->thread.debug.dbcr0) +#define DBCR_DAC1R DBCR0_DAC1R +#define DBCR_DAC1W DBCR0_DAC1W +#define DBCR_DAC2R DBCR0_DAC2R +#define DBCR_DAC2W DBCR0_DAC2W + +/* Bit definitions related to the DBCR1. */ +#define DBCR1_IAC1US 0xC0000000 /* Instr Addr Cmp 1 Sup/User */ +#define DBCR1_IAC1ER 0x30000000 /* Instr Addr Cmp 1 Eff/Real */ +#define DBCR1_IAC1ER_01 0x10000000 /* reserved */ +#define DBCR1_IAC1ER_10 0x20000000 /* Instr Addr Cmp 1 Eff/Real MSR[IS]=0 */ +#define DBCR1_IAC1ER_11 0x30000000 /* Instr Addr Cmp 1 Eff/Real MSR[IS]=1 */ +#define DBCR1_IAC2US 0x0C000000 /* Instr Addr Cmp 2 Sup/User */ +#define DBCR1_IAC2ER 0x03000000 /* Instr Addr Cmp 2 Eff/Real */ +#define DBCR1_IAC2ER_01 0x01000000 /* reserved */ +#define DBCR1_IAC2ER_10 0x02000000 /* Instr Addr Cmp 2 Eff/Real MSR[IS]=0 */ +#define DBCR1_IAC2ER_11 0x03000000 /* Instr Addr Cmp 2 Eff/Real MSR[IS]=1 */ +#define DBCR1_IAC12M 0x00800000 /* Instr Addr 1-2 range enable */ +#define DBCR1_IAC12MX 0x00C00000 /* Instr Addr 1-2 range eXclusive */ +#define DBCR1_IAC12AT 0x00010000 /* Instr Addr 1-2 range Toggle */ +#define DBCR1_IAC3US 0x0000C000 /* Instr Addr Cmp 3 Sup/User */ +#define DBCR1_IAC3ER 0x00003000 /* Instr Addr Cmp 3 Eff/Real */ +#define DBCR1_IAC3ER_01 0x00001000 /* reserved */ +#define DBCR1_IAC3ER_10 0x00002000 /* Instr Addr Cmp 3 Eff/Real MSR[IS]=0 */ +#define DBCR1_IAC3ER_11 0x00003000 /* Instr Addr Cmp 3 Eff/Real MSR[IS]=1 */ +#define DBCR1_IAC4US 0x00000C00 /* Instr Addr Cmp 4 Sup/User */ +#define DBCR1_IAC4ER 0x00000300 /* Instr Addr Cmp 4 Eff/Real */ +#define DBCR1_IAC4ER_01 0x00000100 /* Instr Addr Cmp 4 Eff/Real MSR[IS]=0 */ +#define DBCR1_IAC4ER_10 0x00000200 /* Instr Addr Cmp 4 Eff/Real MSR[IS]=0 */ +#define DBCR1_IAC4ER_11 0x00000300 /* Instr Addr Cmp 4 Eff/Real MSR[IS]=1 */ +#define DBCR1_IAC34M 0x00000080 /* Instr Addr 3-4 range enable */ +#define DBCR1_IAC34MX 0x000000C0 /* Instr Addr 3-4 range eXclusive */ +#define DBCR1_IAC34AT 0x00000001 /* Instr Addr 3-4 range Toggle */ + +#define dbcr_iac_range(task) ((task)->thread.debug.dbcr1) +#define DBCR_IAC12I DBCR1_IAC12M /* Range Inclusive */ +#define DBCR_IAC12X DBCR1_IAC12MX /* Range Exclusive */ +#define DBCR_IAC12MODE DBCR1_IAC12MX /* IAC 1-2 Mode Bits */ +#define DBCR_IAC34I DBCR1_IAC34M /* Range Inclusive */ +#define DBCR_IAC34X DBCR1_IAC34MX /* Range Exclusive */ +#define DBCR_IAC34MODE DBCR1_IAC34MX /* IAC 3-4 Mode Bits */ + +/* Bit definitions related to the DBCR2. */ +#define DBCR2_DAC1US 0xC0000000 /* Data Addr Cmp 1 Sup/User */ +#define DBCR2_DAC1ER 0x30000000 /* Data Addr Cmp 1 Eff/Real */ +#define DBCR2_DAC2US 0x0C000000 /* Data Addr Cmp 2 Sup/User */ +#define DBCR2_DAC2ER 0x03000000 /* Data Addr Cmp 2 Eff/Real */ +#define DBCR2_DAC12M 0x00800000 /* DAC 1-2 range enable */ +#define DBCR2_DAC12MM 0x00400000 /* DAC 1-2 Mask mode*/ +#define DBCR2_DAC12MX 0x00C00000 /* DAC 1-2 range eXclusive */ +#define DBCR2_DAC12MODE 0x00C00000 /* DAC 1-2 Mode Bits */ +#define DBCR2_DAC12A 0x00200000 /* DAC 1-2 Asynchronous */ +#define DBCR2_DVC1M 0x000C0000 /* Data Value Comp 1 Mode */ +#define DBCR2_DVC1M_SHIFT 18 /* # of bits to shift DBCR2_DVC1M */ +#define DBCR2_DVC2M 0x00030000 /* Data Value Comp 2 Mode */ +#define DBCR2_DVC2M_SHIFT 16 /* # of bits to shift DBCR2_DVC2M */ +#define DBCR2_DVC1BE 0x00000F00 /* Data Value Comp 1 Byte */ +#define DBCR2_DVC1BE_SHIFT 8 /* # of bits to shift DBCR2_DVC1BE */ +#define DBCR2_DVC2BE 0x0000000F /* Data Value Comp 2 Byte */ +#define DBCR2_DVC2BE_SHIFT 0 /* # of bits to shift DBCR2_DVC2BE */ + +/* + * Are there any active Debug Events represented in the + * Debug Control Registers? + */ +#define DBCR0_ACTIVE_EVENTS (DBCR0_ICMP | DBCR0_IAC1 | DBCR0_IAC2 | \ + DBCR0_IAC3 | DBCR0_IAC4 | DBCR0_DAC1R | \ + DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W) +#define DBCR1_ACTIVE_EVENTS 0 + +#define DBCR_ACTIVE_EVENTS(dbcr0, dbcr1) (((dbcr0) & DBCR0_ACTIVE_EVENTS) || \ + ((dbcr1) & DBCR1_ACTIVE_EVENTS)) +#endif /* #elif defined(CONFIG_BOOKE) */ + +/* Bit definitions related to the TCR. */ +#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */ +#define TCR_WP_MASK TCR_WP(3) +#define WP_2_17 0 /* 2^17 clocks */ +#define WP_2_21 1 /* 2^21 clocks */ +#define WP_2_25 2 /* 2^25 clocks */ +#define WP_2_29 3 /* 2^29 clocks */ +#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */ +#define TCR_WRC_MASK TCR_WRC(3) +#define WRC_NONE 0 /* No reset will occur */ +#define WRC_CORE 1 /* Core reset will occur */ +#define WRC_CHIP 2 /* Chip reset will occur */ +#define WRC_SYSTEM 3 /* System reset will occur */ +#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */ +#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */ +#define TCR_DIE TCR_PIE /* DEC Interrupt Enable */ +#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */ +#define TCR_FP_MASK TCR_FP(3) +#define FP_2_9 0 /* 2^9 clocks */ +#define FP_2_13 1 /* 2^13 clocks */ +#define FP_2_17 2 /* 2^17 clocks */ +#define FP_2_21 3 /* 2^21 clocks */ +#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */ +#define TCR_ARE 0x00400000 /* Auto Reload Enable */ + +#ifdef CONFIG_E500 +#define TCR_GET_WP(tcr) ((((tcr) & 0xC0000000) >> 30) | \ + (((tcr) & 0x1E0000) >> 15)) +#else +#define TCR_GET_WP(tcr) (((tcr) & 0xC0000000) >> 30) +#endif + +/* Bit definitions for the TSR. */ +#define TSR_ENW 0x80000000 /* Enable Next Watchdog */ +#define TSR_WIS 0x40000000 /* WDT Interrupt Status */ +#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */ +#define WRS_NONE 0 /* No WDT reset occurred */ +#define WRS_CORE 1 /* WDT forced core reset */ +#define WRS_CHIP 2 /* WDT forced chip reset */ +#define WRS_SYSTEM 3 /* WDT forced system reset */ +#define TSR_PIS 0x08000000 /* PIT Interrupt Status */ +#define TSR_DIS TSR_PIS /* DEC Interrupt Status */ +#define TSR_FIS 0x04000000 /* FIT Interrupt Status */ + +/* Bit definitions for the DCCR. */ +#define DCCR_NOCACHE 0 /* Noncacheable */ +#define DCCR_CACHE 1 /* Cacheable */ + +/* Bit definitions for DCWR. */ +#define DCWR_COPY 0 /* Copy-back */ +#define DCWR_WRITE 1 /* Write-through */ + +/* Bit definitions for ICCR. */ +#define ICCR_NOCACHE 0 /* Noncacheable */ +#define ICCR_CACHE 1 /* Cacheable */ + +/* Bit definitions for L1CSR0. */ +#define L1CSR0_CPE 0x00010000 /* Data Cache Parity Enable */ +#define L1CSR0_CUL 0x00000400 /* Data Cache Unable to Lock */ +#define L1CSR0_CLFC 0x00000100 /* Cache Lock Bits Flash Clear */ +#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */ +#define L1CSR0_CFI 0x00000002 /* Cache Flash Invalidate */ +#define L1CSR0_DCE 0x00000001 /* Data Cache Enable */ + +/* Bit definitions for L1CSR1. */ +#define L1CSR1_CPE 0x00010000 /* Instruction Cache Parity Enable */ +#define L1CSR1_ICLFR 0x00000100 /* Instr Cache Lock Bits Flash Reset */ +#define L1CSR1_ICFI 0x00000002 /* Instr Cache Flash Invalidate */ +#define L1CSR1_ICE 0x00000001 /* Instr Cache Enable */ + +/* Bit definitions for L1CSR2. */ +#define L1CSR2_DCWS 0x40000000 /* Data Cache write shadow */ + +/* Bit definitions for BUCSR. */ +#define BUCSR_STAC_EN 0x01000000 /* Segment Target Address Cache */ +#define BUCSR_LS_EN 0x00400000 /* Link Stack */ +#define BUCSR_BBFI 0x00000200 /* Branch Buffer flash invalidate */ +#define BUCSR_BPEN 0x00000001 /* Branch prediction enable */ +#define BUCSR_INIT (BUCSR_STAC_EN | BUCSR_LS_EN | BUCSR_BBFI | BUCSR_BPEN) + +/* Bit definitions for L2CSR0. */ +#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */ +#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */ +#define L2CSR0_L2WP 0x1c000000 /* L2 I/D Way Partioning */ +#define L2CSR0_L2CM 0x03000000 /* L2 Cache Coherency Mode */ +#define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */ +#define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */ +#define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */ +#define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */ +#define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */ +#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */ +#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */ +#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */ + +/* Bit definitions for SGR. */ +#define SGR_NORMAL 0 /* Speculative fetching allowed. */ +#define SGR_GUARDED 1 /* Speculative fetching disallowed. */ + +/* Bit definitions for EPCR */ +#define SPRN_EPCR_EXTGS 0x80000000 /* External Input interrupt + * directed to Guest state */ +#define SPRN_EPCR_DTLBGS 0x40000000 /* Data TLB Error interrupt + * directed to guest state */ +#define SPRN_EPCR_ITLBGS 0x20000000 /* Instr. TLB error interrupt + * directed to guest state */ +#define SPRN_EPCR_DSIGS 0x10000000 /* Data Storage interrupt + * directed to guest state */ +#define SPRN_EPCR_ISIGS 0x08000000 /* Instr. Storage interrupt + * directed to guest state */ +#define SPRN_EPCR_DUVD 0x04000000 /* Disable Hypervisor Debug */ +#define SPRN_EPCR_ICM 0x02000000 /* Interrupt computation mode + * (copied to MSR:CM on intr) */ +#define SPRN_EPCR_GICM 0x01000000 /* Guest Interrupt Comp. mode */ +#define SPRN_EPCR_DGTMI 0x00800000 /* Disable TLB Guest Management + * instructions */ +#define SPRN_EPCR_DMIUH 0x00400000 /* Disable MAS Interrupt updates + * for hypervisor */ + +/* Bit definitions for EPLC/EPSC */ +#define EPC_EPR 0x80000000 /* 1 = user, 0 = kernel */ +#define EPC_EPR_SHIFT 31 +#define EPC_EAS 0x40000000 /* Address Space */ +#define EPC_EAS_SHIFT 30 +#define EPC_EGS 0x20000000 /* 1 = guest, 0 = hypervisor */ +#define EPC_EGS_SHIFT 29 +#define EPC_ELPID 0x00ff0000 +#define EPC_ELPID_SHIFT 16 +#define EPC_EPID 0x00003fff +#define EPC_EPID_SHIFT 0 + +/* Some 476 specific registers */ +#define SPRN_SSPCR 830 +#define SPRN_USPCR 831 +#define SPRN_ISPCR 829 +#define SPRN_MMUBE0 820 +#define MMUBE0_IBE0_SHIFT 24 +#define MMUBE0_IBE1_SHIFT 16 +#define MMUBE0_IBE2_SHIFT 8 +#define MMUBE0_VBE0 0x00000004 +#define MMUBE0_VBE1 0x00000002 +#define MMUBE0_VBE2 0x00000001 +#define SPRN_MMUBE1 821 +#define MMUBE1_IBE3_SHIFT 24 +#define MMUBE1_IBE4_SHIFT 16 +#define MMUBE1_IBE5_SHIFT 8 +#define MMUBE1_VBE3 0x00000004 +#define MMUBE1_VBE4 0x00000002 +#define MMUBE1_VBE5 0x00000001 + +#define TMRN_TMCFG0 16 /* Thread Management Configuration Register 0 */ +#define TMRN_TMCFG0_NPRIBITS 0x003f0000 /* Bits of thread priority */ +#define TMRN_TMCFG0_NPRIBITS_SHIFT 16 +#define TMRN_TMCFG0_NATHRD 0x00003f00 /* Number of active threads */ +#define TMRN_TMCFG0_NATHRD_SHIFT 8 +#define TMRN_TMCFG0_NTHRD 0x0000003f /* Number of threads */ +#define TMRN_IMSR0 0x120 /* Initial MSR Register 0 (e6500) */ +#define TMRN_IMSR1 0x121 /* Initial MSR Register 1 (e6500) */ +#define TMRN_INIA0 0x140 /* Next Instruction Address Register 0 */ +#define TMRN_INIA1 0x141 /* Next Instruction Address Register 1 */ +#define SPRN_TENSR 0x1b5 /* Thread Enable Status Register */ +#define SPRN_TENS 0x1b6 /* Thread Enable Set Register */ +#define SPRN_TENC 0x1b7 /* Thread Enable Clear Register */ + +#define TEN_THREAD(x) (1 << (x)) + +#ifndef __ASSEMBLY__ +#define mftmr(rn) ({unsigned long rval; \ + asm volatile(MFTMR(rn, %0) : "=r" (rval)); rval;}) +#define mttmr(rn, v) asm volatile(MTTMR(rn, %0) : \ + : "r" ((unsigned long)(v)) \ + : "memory") +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_POWERPC_REG_BOOKE_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h new file mode 100644 index 000000000..a21f529c4 --- /dev/null +++ b/arch/powerpc/include/asm/reg_fsl_emb.h @@ -0,0 +1,89 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Contains register definitions for the Freescale Embedded Performance + * Monitor. + */ +#ifdef __KERNEL__ +#ifndef __ASM_POWERPC_REG_FSL_EMB_H__ +#define __ASM_POWERPC_REG_FSL_EMB_H__ + +#include <linux/stringify.h> + +#ifndef __ASSEMBLY__ +/* Performance Monitor Registers */ +#define mfpmr(rn) ({unsigned int rval; \ + asm volatile("mfpmr %0," __stringify(rn) \ + : "=r" (rval)); rval;}) +#define mtpmr(rn, v) asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v)) +#endif /* __ASSEMBLY__ */ + +/* Freescale Book E Performance Monitor APU Registers */ +#define PMRN_PMC0 0x010 /* Performance Monitor Counter 0 */ +#define PMRN_PMC1 0x011 /* Performance Monitor Counter 1 */ +#define PMRN_PMC2 0x012 /* Performance Monitor Counter 2 */ +#define PMRN_PMC3 0x013 /* Performance Monitor Counter 3 */ +#define PMRN_PMC4 0x014 /* Performance Monitor Counter 4 */ +#define PMRN_PMC5 0x015 /* Performance Monitor Counter 5 */ +#define PMRN_PMLCA0 0x090 /* PM Local Control A0 */ +#define PMRN_PMLCA1 0x091 /* PM Local Control A1 */ +#define PMRN_PMLCA2 0x092 /* PM Local Control A2 */ +#define PMRN_PMLCA3 0x093 /* PM Local Control A3 */ +#define PMRN_PMLCA4 0x094 /* PM Local Control A4 */ +#define PMRN_PMLCA5 0x095 /* PM Local Control A5 */ + +#define PMLCA_FC 0x80000000 /* Freeze Counter */ +#define PMLCA_FCS 0x40000000 /* Freeze in Supervisor */ +#define PMLCA_FCU 0x20000000 /* Freeze in User */ +#define PMLCA_FCM1 0x10000000 /* Freeze when PMM==1 */ +#define PMLCA_FCM0 0x08000000 /* Freeze when PMM==0 */ +#define PMLCA_CE 0x04000000 /* Condition Enable */ +#define PMLCA_FGCS1 0x00000002 /* Freeze in guest state */ +#define PMLCA_FGCS0 0x00000001 /* Freeze in hypervisor state */ + +#define PMLCA_EVENT_MASK 0x01ff0000 /* Event field */ +#define PMLCA_EVENT_SHIFT 16 + +#define PMRN_PMLCB0 0x110 /* PM Local Control B0 */ +#define PMRN_PMLCB1 0x111 /* PM Local Control B1 */ +#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */ +#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */ +#define PMRN_PMLCB4 0x114 /* PM Local Control B4 */ +#define PMRN_PMLCB5 0x115 /* PM Local Control B5 */ + +#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshold Multiple Field */ +#define PMLCB_THRESHMUL_SHIFT 8 + +#define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */ +#define PMLCB_THRESHOLD_SHIFT 0 + +#define PMRN_PMGC0 0x190 /* PM Global Control 0 */ + +#define PMGC0_FAC 0x80000000 /* Freeze all Counters */ +#define PMGC0_PMIE 0x40000000 /* Interrupt Enable */ +#define PMGC0_FCECE 0x20000000 /* Freeze countes on + Enabled Condition or + Event */ + +#define PMRN_UPMC0 0x000 /* User Performance Monitor Counter 0 */ +#define PMRN_UPMC1 0x001 /* User Performance Monitor Counter 1 */ +#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 2 */ +#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 3 */ +#define PMRN_UPMC4 0x004 /* User Performance Monitor Counter 4 */ +#define PMRN_UPMC5 0x005 /* User Performance Monitor Counter 5 */ +#define PMRN_UPMLCA0 0x080 /* User PM Local Control A0 */ +#define PMRN_UPMLCA1 0x081 /* User PM Local Control A1 */ +#define PMRN_UPMLCA2 0x082 /* User PM Local Control A2 */ +#define PMRN_UPMLCA3 0x083 /* User PM Local Control A3 */ +#define PMRN_UPMLCA4 0x084 /* User PM Local Control A4 */ +#define PMRN_UPMLCA5 0x085 /* User PM Local Control A5 */ +#define PMRN_UPMLCB0 0x100 /* User PM Local Control B0 */ +#define PMRN_UPMLCB1 0x101 /* User PM Local Control B1 */ +#define PMRN_UPMLCB2 0x102 /* User PM Local Control B2 */ +#define PMRN_UPMLCB3 0x103 /* User PM Local Control B3 */ +#define PMRN_UPMLCB4 0x104 /* User PM Local Control B4 */ +#define PMRN_UPMLCB5 0x105 /* User PM Local Control B5 */ +#define PMRN_UPMGC0 0x180 /* User PM Global Control 0 */ + + +#endif /* __ASM_POWERPC_REG_FSL_EMB_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/rheap.h b/arch/powerpc/include/asm/rheap.h new file mode 100644 index 000000000..8e83703d6 --- /dev/null +++ b/arch/powerpc/include/asm/rheap.h @@ -0,0 +1,92 @@ +/* + * include/asm-ppc/rheap.h + * + * Header file for the implementation of a remote heap. + * + * Author: Pantelis Antoniou <panto@intracom.gr> + * + * 2004 (c) INTRACOM S.A. Greece. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef __ASM_PPC_RHEAP_H__ +#define __ASM_PPC_RHEAP_H__ + +#include <linux/list.h> + +typedef struct _rh_block { + struct list_head list; + unsigned long start; + int size; + const char *owner; +} rh_block_t; + +typedef struct _rh_info { + unsigned int alignment; + int max_blocks; + int empty_slots; + rh_block_t *block; + struct list_head empty_list; + struct list_head free_list; + struct list_head taken_list; + unsigned int flags; +} rh_info_t; + +#define RHIF_STATIC_INFO 0x1 +#define RHIF_STATIC_BLOCK 0x2 + +typedef struct _rh_stats { + unsigned long start; + int size; + const char *owner; +} rh_stats_t; + +#define RHGS_FREE 0 +#define RHGS_TAKEN 1 + +/* Create a remote heap dynamically */ +extern rh_info_t *rh_create(unsigned int alignment); + +/* Destroy a remote heap, created by rh_create() */ +extern void rh_destroy(rh_info_t * info); + +/* Initialize in place a remote info block */ +extern void rh_init(rh_info_t * info, unsigned int alignment, int max_blocks, + rh_block_t * block); + +/* Attach a free region to manage */ +extern int rh_attach_region(rh_info_t * info, unsigned long start, int size); + +/* Detach a free region */ +extern unsigned long rh_detach_region(rh_info_t * info, unsigned long start, int size); + +/* Allocate the given size from the remote heap (with alignment) */ +extern unsigned long rh_alloc_align(rh_info_t * info, int size, int alignment, + const char *owner); + +/* Allocate the given size from the remote heap */ +extern unsigned long rh_alloc(rh_info_t * info, int size, const char *owner); + +/* Allocate the given size from the given address */ +extern unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size, + const char *owner); + +/* Free the allocated area */ +extern int rh_free(rh_info_t * info, unsigned long start); + +/* Get stats for debugging purposes */ +extern int rh_get_stats(rh_info_t * info, int what, int max_stats, + rh_stats_t * stats); + +/* Simple dump of remote heap info */ +extern void rh_dump(rh_info_t * info); + +/* Simple dump of remote info block */ +void rh_dump_blk(rh_info_t *info, rh_block_t *blk); + +/* Set owner of taken block */ +extern int rh_set_owner(rh_info_t * info, unsigned long start, const char *owner); + +#endif /* __ASM_PPC_RHEAP_H__ */ diff --git a/arch/powerpc/include/asm/rio.h b/arch/powerpc/include/asm/rio.h new file mode 100644 index 000000000..0e57cda2a --- /dev/null +++ b/arch/powerpc/include/asm/rio.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * RapidIO architecture support + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter <mporter@kernel.crashing.org> + */ + +#ifndef ASM_PPC_RIO_H +#define ASM_PPC_RIO_H + +#ifdef CONFIG_FSL_RIO +extern int fsl_rio_mcheck_exception(struct pt_regs *); +#else +static inline int fsl_rio_mcheck_exception(struct pt_regs *regs) {return 0; } +#endif + +#endif /* ASM_PPC_RIO_H */ diff --git a/arch/powerpc/include/asm/rtas-types.h b/arch/powerpc/include/asm/rtas-types.h new file mode 100644 index 000000000..aa420561b --- /dev/null +++ b/arch/powerpc/include/asm/rtas-types.h @@ -0,0 +1,124 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_RTAS_TYPES_H +#define _ASM_POWERPC_RTAS_TYPES_H + +#include <linux/spinlock_types.h> + +typedef __be32 rtas_arg_t; + +struct rtas_args { + __be32 token; + __be32 nargs; + __be32 nret; + rtas_arg_t args[16]; + rtas_arg_t *rets; /* Pointer to return values in args[]. */ +}; + +struct rtas_t { + unsigned long entry; /* physical address pointer */ + unsigned long base; /* physical address pointer */ + unsigned long size; + arch_spinlock_t lock; + struct rtas_args args; + struct device_node *dev; /* virtual address pointer */ +}; + +struct rtas_suspend_me_data { + atomic_t working; /* number of cpus accessing this struct */ + atomic_t done; + int token; /* ibm,suspend-me */ + atomic_t error; + struct completion *complete; /* wait on this until working == 0 */ +}; + +struct rtas_error_log { + /* Byte 0 */ + u8 byte0; /* Architectural version */ + + /* Byte 1 */ + u8 byte1; + /* XXXXXXXX + * XXX 3: Severity level of error + * XX 2: Degree of recovery + * X 1: Extended log present? + * XX 2: Reserved + */ + + /* Byte 2 */ + u8 byte2; + /* XXXXXXXX + * XXXX 4: Initiator of event + * XXXX 4: Target of failed operation + */ + u8 byte3; /* General event or error*/ + __be32 extended_log_length; /* length in bytes */ + unsigned char buffer[1]; /* Start of extended log */ + /* Variable length. */ +}; + +/* RTAS general extended event log, Version 6. The extended log starts + * from "buffer" field of struct rtas_error_log defined above. + */ +struct rtas_ext_event_log_v6 { + /* Byte 0 */ + u8 byte0; + /* XXXXXXXX + * X 1: Log valid + * X 1: Unrecoverable error + * X 1: Recoverable (correctable or successfully retried) + * X 1: Bypassed unrecoverable error (degraded operation) + * X 1: Predictive error + * X 1: "New" log (always 1 for data returned from RTAS) + * X 1: Big Endian + * X 1: Reserved + */ + + /* Byte 1 */ + u8 byte1; /* reserved */ + + /* Byte 2 */ + u8 byte2; + /* XXXXXXXX + * X 1: Set to 1 (indicating log is in PowerPC format) + * XXX 3: Reserved + * XXXX 4: Log format used for bytes 12-2047 + */ + + /* Byte 3 */ + u8 byte3; /* reserved */ + /* Byte 4-11 */ + u8 reserved[8]; /* reserved */ + /* Byte 12-15 */ + __be32 company_id; /* Company ID of the company */ + /* that defines the format for */ + /* the vendor specific log type */ + /* Byte 16-end of log */ + u8 vendor_log[1]; /* Start of vendor specific log */ + /* Variable length. */ +}; + +/* Vendor specific Platform Event Log Format, Version 6, section header */ +struct pseries_errorlog { + __be16 id; /* 0x00 2-byte ASCII section ID */ + __be16 length; /* 0x02 Section length in bytes */ + u8 version; /* 0x04 Section version */ + u8 subtype; /* 0x05 Section subtype */ + __be16 creator_component; /* 0x06 Creator component ID */ + u8 data[]; /* 0x08 Start of section data */ +}; + +/* RTAS pseries hotplug errorlog section */ +struct pseries_hp_errorlog { + u8 resource; + u8 action; + u8 id_type; + u8 reserved; + union { + __be32 drc_index; + __be32 drc_count; + struct { __be32 count, index; } ic; + char drc_name[1]; + } _drc_u; +}; + +#endif /* _ASM_POWERPC_RTAS_TYPES_H */ diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h new file mode 100644 index 000000000..55f9a154c --- /dev/null +++ b/arch/powerpc/include/asm/rtas.h @@ -0,0 +1,375 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _POWERPC_RTAS_H +#define _POWERPC_RTAS_H +#ifdef __KERNEL__ + +#include <linux/spinlock.h> +#include <asm/page.h> +#include <asm/rtas-types.h> +#include <linux/time.h> +#include <linux/cpumask.h> + +/* + * Definitions for talking to the RTAS on CHRP machines. + * + * Copyright (C) 2001 Peter Bergner + * Copyright (C) 2001 PPC 64 Team, IBM Corp + */ + +#define RTAS_UNKNOWN_SERVICE (-1) +#define RTAS_INSTANTIATE_MAX (1ULL<<30) /* Don't instantiate rtas at/above this value */ + +/* Buffer size for ppc_rtas system call. */ +#define RTAS_RMOBUF_MAX (64 * 1024) + +/* RTAS return status codes */ +#define RTAS_NOT_SUSPENDABLE -9004 +#define RTAS_BUSY -2 /* RTAS Busy */ +#define RTAS_EXTENDED_DELAY_MIN 9900 +#define RTAS_EXTENDED_DELAY_MAX 9905 + +/* + * In general to call RTAS use rtas_token("string") to lookup + * an RTAS token for the given string (e.g. "event-scan"). + * To actually perform the call use + * ret = rtas_call(token, n_in, n_out, ...) + * Where n_in is the number of input parameters and + * n_out is the number of output parameters + * + * If the "string" is invalid on this system, RTAS_UNKNOWN_SERVICE + * will be returned as a token. rtas_call() does look for this + * token and error out gracefully so rtas_call(rtas_token("str"), ...) + * may be safely used for one-shot calls to RTAS. + * + */ + +/* RTAS event classes */ +#define RTAS_INTERNAL_ERROR 0x80000000 /* set bit 0 */ +#define RTAS_EPOW_WARNING 0x40000000 /* set bit 1 */ +#define RTAS_HOTPLUG_EVENTS 0x10000000 /* set bit 3 */ +#define RTAS_IO_EVENTS 0x08000000 /* set bit 4 */ +#define RTAS_EVENT_SCAN_ALL_EVENTS 0xffffffff + +/* RTAS event severity */ +#define RTAS_SEVERITY_FATAL 0x5 +#define RTAS_SEVERITY_ERROR 0x4 +#define RTAS_SEVERITY_ERROR_SYNC 0x3 +#define RTAS_SEVERITY_WARNING 0x2 +#define RTAS_SEVERITY_EVENT 0x1 +#define RTAS_SEVERITY_NO_ERROR 0x0 + +/* RTAS event disposition */ +#define RTAS_DISP_FULLY_RECOVERED 0x0 +#define RTAS_DISP_LIMITED_RECOVERY 0x1 +#define RTAS_DISP_NOT_RECOVERED 0x2 + +/* RTAS event initiator */ +#define RTAS_INITIATOR_UNKNOWN 0x0 +#define RTAS_INITIATOR_CPU 0x1 +#define RTAS_INITIATOR_PCI 0x2 +#define RTAS_INITIATOR_ISA 0x3 +#define RTAS_INITIATOR_MEMORY 0x4 +#define RTAS_INITIATOR_POWERMGM 0x5 + +/* RTAS event target */ +#define RTAS_TARGET_UNKNOWN 0x0 +#define RTAS_TARGET_CPU 0x1 +#define RTAS_TARGET_PCI 0x2 +#define RTAS_TARGET_ISA 0x3 +#define RTAS_TARGET_MEMORY 0x4 +#define RTAS_TARGET_POWERMGM 0x5 + +/* RTAS event type */ +#define RTAS_TYPE_RETRY 0x01 +#define RTAS_TYPE_TCE_ERR 0x02 +#define RTAS_TYPE_INTERN_DEV_FAIL 0x03 +#define RTAS_TYPE_TIMEOUT 0x04 +#define RTAS_TYPE_DATA_PARITY 0x05 +#define RTAS_TYPE_ADDR_PARITY 0x06 +#define RTAS_TYPE_CACHE_PARITY 0x07 +#define RTAS_TYPE_ADDR_INVALID 0x08 +#define RTAS_TYPE_ECC_UNCORR 0x09 +#define RTAS_TYPE_ECC_CORR 0x0a +#define RTAS_TYPE_EPOW 0x40 +#define RTAS_TYPE_PLATFORM 0xE0 +#define RTAS_TYPE_IO 0xE1 +#define RTAS_TYPE_INFO 0xE2 +#define RTAS_TYPE_DEALLOC 0xE3 +#define RTAS_TYPE_DUMP 0xE4 +#define RTAS_TYPE_HOTPLUG 0xE5 +/* I don't add PowerMGM events right now, this is a different topic */ +#define RTAS_TYPE_PMGM_POWER_SW_ON 0x60 +#define RTAS_TYPE_PMGM_POWER_SW_OFF 0x61 +#define RTAS_TYPE_PMGM_LID_OPEN 0x62 +#define RTAS_TYPE_PMGM_LID_CLOSE 0x63 +#define RTAS_TYPE_PMGM_SLEEP_BTN 0x64 +#define RTAS_TYPE_PMGM_WAKE_BTN 0x65 +#define RTAS_TYPE_PMGM_BATTERY_WARN 0x66 +#define RTAS_TYPE_PMGM_BATTERY_CRIT 0x67 +#define RTAS_TYPE_PMGM_SWITCH_TO_BAT 0x68 +#define RTAS_TYPE_PMGM_SWITCH_TO_AC 0x69 +#define RTAS_TYPE_PMGM_KBD_OR_MOUSE 0x6a +#define RTAS_TYPE_PMGM_ENCLOS_OPEN 0x6b +#define RTAS_TYPE_PMGM_ENCLOS_CLOSED 0x6c +#define RTAS_TYPE_PMGM_RING_INDICATE 0x6d +#define RTAS_TYPE_PMGM_LAN_ATTENTION 0x6e +#define RTAS_TYPE_PMGM_TIME_ALARM 0x6f +#define RTAS_TYPE_PMGM_CONFIG_CHANGE 0x70 +#define RTAS_TYPE_PMGM_SERVICE_PROC 0x71 +/* Platform Resource Reassignment Notification */ +#define RTAS_TYPE_PRRN 0xA0 + +/* RTAS check-exception vector offset */ +#define RTAS_VECTOR_EXTERNAL_INTERRUPT 0x500 + +static inline uint8_t rtas_error_severity(const struct rtas_error_log *elog) +{ + return (elog->byte1 & 0xE0) >> 5; +} + +static inline uint8_t rtas_error_disposition(const struct rtas_error_log *elog) +{ + return (elog->byte1 & 0x18) >> 3; +} + +static inline +void rtas_set_disposition_recovered(struct rtas_error_log *elog) +{ + elog->byte1 &= ~0x18; + elog->byte1 |= (RTAS_DISP_FULLY_RECOVERED << 3); +} + +static inline uint8_t rtas_error_extended(const struct rtas_error_log *elog) +{ + return (elog->byte1 & 0x04) >> 2; +} + +static inline uint8_t rtas_error_initiator(const struct rtas_error_log *elog) +{ + return (elog->byte2 & 0xf0) >> 4; +} + +#define rtas_error_type(x) ((x)->byte3) + +static inline +uint32_t rtas_error_extended_log_length(const struct rtas_error_log *elog) +{ + return be32_to_cpu(elog->extended_log_length); +} + +#define RTAS_V6EXT_LOG_FORMAT_EVENT_LOG 14 + +#define RTAS_V6EXT_COMPANY_ID_IBM (('I' << 24) | ('B' << 16) | ('M' << 8)) + +static +inline uint8_t rtas_ext_event_log_format(struct rtas_ext_event_log_v6 *ext_log) +{ + return ext_log->byte2 & 0x0F; +} + +static +inline uint32_t rtas_ext_event_company_id(struct rtas_ext_event_log_v6 *ext_log) +{ + return be32_to_cpu(ext_log->company_id); +} + +/* pSeries event log format */ + +/* Two bytes ASCII section IDs */ +#define PSERIES_ELOG_SECT_ID_PRIV_HDR (('P' << 8) | 'H') +#define PSERIES_ELOG_SECT_ID_USER_HDR (('U' << 8) | 'H') +#define PSERIES_ELOG_SECT_ID_PRIMARY_SRC (('P' << 8) | 'S') +#define PSERIES_ELOG_SECT_ID_EXTENDED_UH (('E' << 8) | 'H') +#define PSERIES_ELOG_SECT_ID_FAILING_MTMS (('M' << 8) | 'T') +#define PSERIES_ELOG_SECT_ID_SECONDARY_SRC (('S' << 8) | 'S') +#define PSERIES_ELOG_SECT_ID_DUMP_LOCATOR (('D' << 8) | 'H') +#define PSERIES_ELOG_SECT_ID_FW_ERROR (('S' << 8) | 'W') +#define PSERIES_ELOG_SECT_ID_IMPACT_PART_ID (('L' << 8) | 'P') +#define PSERIES_ELOG_SECT_ID_LOGIC_RESOURCE_ID (('L' << 8) | 'R') +#define PSERIES_ELOG_SECT_ID_HMC_ID (('H' << 8) | 'M') +#define PSERIES_ELOG_SECT_ID_EPOW (('E' << 8) | 'P') +#define PSERIES_ELOG_SECT_ID_IO_EVENT (('I' << 8) | 'E') +#define PSERIES_ELOG_SECT_ID_MANUFACT_INFO (('M' << 8) | 'I') +#define PSERIES_ELOG_SECT_ID_CALL_HOME (('C' << 8) | 'H') +#define PSERIES_ELOG_SECT_ID_USER_DEF (('U' << 8) | 'D') +#define PSERIES_ELOG_SECT_ID_HOTPLUG (('H' << 8) | 'P') +#define PSERIES_ELOG_SECT_ID_MCE (('M' << 8) | 'C') + +static +inline uint16_t pseries_errorlog_id(struct pseries_errorlog *sect) +{ + return be16_to_cpu(sect->id); +} + +static +inline uint16_t pseries_errorlog_length(struct pseries_errorlog *sect) +{ + return be16_to_cpu(sect->length); +} + +#define PSERIES_HP_ELOG_RESOURCE_CPU 1 +#define PSERIES_HP_ELOG_RESOURCE_MEM 2 +#define PSERIES_HP_ELOG_RESOURCE_SLOT 3 +#define PSERIES_HP_ELOG_RESOURCE_PHB 4 +#define PSERIES_HP_ELOG_RESOURCE_PMEM 6 + +#define PSERIES_HP_ELOG_ACTION_ADD 1 +#define PSERIES_HP_ELOG_ACTION_REMOVE 2 + +#define PSERIES_HP_ELOG_ID_DRC_NAME 1 +#define PSERIES_HP_ELOG_ID_DRC_INDEX 2 +#define PSERIES_HP_ELOG_ID_DRC_COUNT 3 +#define PSERIES_HP_ELOG_ID_DRC_IC 4 + +struct pseries_errorlog *get_pseries_errorlog(struct rtas_error_log *log, + uint16_t section_id); + +/* + * This can be set by the rtas_flash module so that it can get called + * as the absolutely last thing before the kernel terminates. + */ +extern void (*rtas_flash_term_hook)(int); + +extern struct rtas_t rtas; + +extern int rtas_token(const char *service); +extern int rtas_service_present(const char *service); +extern int rtas_call(int token, int, int, int *, ...); +int rtas_call_reentrant(int token, int nargs, int nret, int *outputs, ...); +void rtas_call_unlocked(struct rtas_args *args, int token, int nargs, + int nret, ...); +extern void __noreturn rtas_restart(char *cmd); +extern void rtas_power_off(void); +extern void __noreturn rtas_halt(void); +extern void rtas_os_term(char *str); +extern int rtas_get_sensor(int sensor, int index, int *state); +extern int rtas_get_sensor_fast(int sensor, int index, int *state); +extern int rtas_get_power_level(int powerdomain, int *level); +extern int rtas_set_power_level(int powerdomain, int level, int *setlevel); +extern bool rtas_indicator_present(int token, int *maxindex); +extern int rtas_set_indicator(int indicator, int index, int new_value); +extern int rtas_set_indicator_fast(int indicator, int index, int new_value); +extern void rtas_progress(char *s, unsigned short hex); +extern int rtas_suspend_cpu(struct rtas_suspend_me_data *data); +extern int rtas_suspend_last_cpu(struct rtas_suspend_me_data *data); +extern int rtas_ibm_suspend_me(u64 handle); + +struct rtc_time; +extern time64_t rtas_get_boot_time(void); +extern void rtas_get_rtc_time(struct rtc_time *rtc_time); +extern int rtas_set_rtc_time(struct rtc_time *rtc_time); + +extern unsigned int rtas_busy_delay_time(int status); +extern unsigned int rtas_busy_delay(int status); + +extern int early_init_dt_scan_rtas(unsigned long node, + const char *uname, int depth, void *data); + +extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal); + +#ifdef CONFIG_PPC_PSERIES +extern time64_t last_rtas_event; +extern int clobbering_unread_rtas_event(void); +extern int pseries_devicetree_update(s32 scope); +extern void post_mobility_fixup(void); +#else +static inline int clobbering_unread_rtas_event(void) { return 0; } +#endif + +#ifdef CONFIG_PPC_RTAS_DAEMON +extern void rtas_cancel_event_scan(void); +#else +static inline void rtas_cancel_event_scan(void) { } +#endif + +/* Error types logged. */ +#define ERR_FLAG_ALREADY_LOGGED 0x0 +#define ERR_FLAG_BOOT 0x1 /* log was pulled from NVRAM on boot */ +#define ERR_TYPE_RTAS_LOG 0x2 /* from rtas event-scan */ +#define ERR_TYPE_KERNEL_PANIC 0x4 /* from die()/panic() */ +#define ERR_TYPE_KERNEL_PANIC_GZ 0x8 /* ditto, compressed */ + +/* All the types and not flags */ +#define ERR_TYPE_MASK \ + (ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC | ERR_TYPE_KERNEL_PANIC_GZ) + +#define RTAS_DEBUG KERN_DEBUG "RTAS: " + +#define RTAS_ERROR_LOG_MAX 2048 + +/* + * Return the firmware-specified size of the error log buffer + * for all rtas calls that require an error buffer argument. + * This includes 'check-exception' and 'rtas-last-error'. + */ +extern int rtas_get_error_log_max(void); + +/* Event Scan Parameters */ +#define EVENT_SCAN_ALL_EVENTS 0xf0000000 +#define SURVEILLANCE_TOKEN 9000 +#define LOG_NUMBER 64 /* must be a power of two */ +#define LOG_NUMBER_MASK (LOG_NUMBER-1) + +/* Some RTAS ops require a data buffer and that buffer must be < 4G. + * Rather than having a memory allocator, just use this buffer + * (get the lock first), make the RTAS call. Copy the data instead + * of holding the buffer for long. + */ + +#define RTAS_DATA_BUF_SIZE 4096 +extern spinlock_t rtas_data_buf_lock; +extern char rtas_data_buf[RTAS_DATA_BUF_SIZE]; + +/* RMO buffer reserved for user-space RTAS use */ +extern unsigned long rtas_rmo_buf; + +#define GLOBAL_INTERRUPT_QUEUE 9005 + +/** + * rtas_config_addr - Format a busno, devfn and reg for RTAS. + * @busno: The bus number. + * @devfn: The device and function number as encoded by PCI_DEVFN(). + * @reg: The register number. + * + * This function encodes the given busno, devfn and register number as + * required for RTAS calls that take a "config_addr" parameter. + * See PAPR requirement 7.3.4-1 for more info. + */ +static inline u32 rtas_config_addr(int busno, int devfn, int reg) +{ + return ((reg & 0xf00) << 20) | ((busno & 0xff) << 16) | + (devfn << 8) | (reg & 0xff); +} + +extern void rtas_give_timebase(void); +extern void rtas_take_timebase(void); + +#ifdef CONFIG_PPC_RTAS +static inline int page_is_rtas_user_buf(unsigned long pfn) +{ + unsigned long paddr = (pfn << PAGE_SHIFT); + if (paddr >= rtas_rmo_buf && paddr < (rtas_rmo_buf + RTAS_RMOBUF_MAX)) + return 1; + return 0; +} + +/* Not the best place to put pSeries_coalesce_init, will be fixed when we + * move some of the rtas suspend-me stuff to pseries */ +extern void pSeries_coalesce_init(void); +void rtas_initialize(void); +#else +static inline int page_is_rtas_user_buf(unsigned long pfn) { return 0;} +static inline void pSeries_coalesce_init(void) { } +static inline void rtas_initialize(void) { }; +#endif + +extern int call_rtas(const char *, int, int, unsigned long *, ...); + +#ifdef CONFIG_HV_PERF_CTRS +void read_24x7_sys_info(void); +#else +static inline void read_24x7_sys_info(void) { } +#endif + +#endif /* __KERNEL__ */ +#endif /* _POWERPC_RTAS_H */ diff --git a/arch/powerpc/include/asm/runlatch.h b/arch/powerpc/include/asm/runlatch.h new file mode 100644 index 000000000..cfb390edf --- /dev/null +++ b/arch/powerpc/include/asm/runlatch.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> + */ +#ifndef _ASM_POWERPC_RUNLATCH_H +#define _ASM_POWERPC_RUNLATCH_H + +#ifdef CONFIG_PPC64 + +extern void __ppc64_runlatch_on(void); +extern void __ppc64_runlatch_off(void); + +/* + * We manually hard enable-disable, this is called + * in the idle loop and we don't want to mess up + * with soft-disable/enable & interrupt replay. + */ +#define ppc64_runlatch_off() \ + do { \ + if (cpu_has_feature(CPU_FTR_CTRL) && \ + test_thread_local_flags(_TLF_RUNLATCH)) { \ + unsigned long msr = mfmsr(); \ + __hard_irq_disable(); \ + __ppc64_runlatch_off(); \ + if (msr & MSR_EE) \ + __hard_irq_enable(); \ + } \ + } while (0) + +#define ppc64_runlatch_on() \ + do { \ + if (cpu_has_feature(CPU_FTR_CTRL) && \ + !test_thread_local_flags(_TLF_RUNLATCH)) { \ + unsigned long msr = mfmsr(); \ + __hard_irq_disable(); \ + __ppc64_runlatch_on(); \ + if (msr & MSR_EE) \ + __hard_irq_enable(); \ + } \ + } while (0) +#else +#define ppc64_runlatch_on() +#define ppc64_runlatch_off() +#endif /* CONFIG_PPC64 */ + +#endif /* _ASM_POWERPC_RUNLATCH_H */ diff --git a/arch/powerpc/include/asm/seccomp.h b/arch/powerpc/include/asm/seccomp.h new file mode 100644 index 000000000..51209f607 --- /dev/null +++ b/arch/powerpc/include/asm/seccomp.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_SECCOMP_H +#define _ASM_POWERPC_SECCOMP_H + +#include <linux/unistd.h> + +#define __NR_seccomp_sigreturn_32 __NR_sigreturn + +#include <asm-generic/seccomp.h> + +#endif /* _ASM_POWERPC_SECCOMP_H */ diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h new file mode 100644 index 000000000..6e4af4492 --- /dev/null +++ b/arch/powerpc/include/asm/sections.h @@ -0,0 +1,98 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_SECTIONS_H +#define _ASM_POWERPC_SECTIONS_H +#ifdef __KERNEL__ + +#include <linux/elf.h> +#include <linux/uaccess.h> + +#define arch_is_kernel_initmem_freed arch_is_kernel_initmem_freed + +#include <asm-generic/sections.h> + +extern bool init_mem_is_free; + +static inline int arch_is_kernel_initmem_freed(unsigned long addr) +{ + if (!init_mem_is_free) + return 0; + + return addr >= (unsigned long)__init_begin && + addr < (unsigned long)__init_end; +} + +extern char __head_end[]; + +#ifdef __powerpc64__ + +extern char __start_interrupts[]; +extern char __end_interrupts[]; + +extern char __prom_init_toc_start[]; +extern char __prom_init_toc_end[]; + +#ifdef CONFIG_PPC_POWERNV +extern char start_real_trampolines[]; +extern char end_real_trampolines[]; +extern char start_virt_trampolines[]; +extern char end_virt_trampolines[]; +#endif + +static inline unsigned long kernel_toc_addr(void) +{ + /* Defined by the linker, see vmlinux.lds.S */ + extern unsigned long __toc_start; + + /* + * The TOC register (r2) points 32kB into the TOC, so that 64kB of + * the TOC can be addressed using a single machine instruction. + */ + return (unsigned long)(&__toc_start) + 0x8000UL; +} + +static inline int overlaps_interrupt_vector_text(unsigned long start, + unsigned long end) +{ + unsigned long real_start, real_end; + real_start = __start_interrupts - _stext; + real_end = __end_interrupts - _stext; + + return start < (unsigned long)__va(real_end) && + (unsigned long)__va(real_start) < end; +} + +static inline int overlaps_kernel_text(unsigned long start, unsigned long end) +{ + return start < (unsigned long)__init_end && + (unsigned long)_stext < end; +} + +#ifdef PPC64_ELF_ABI_v1 + +#define HAVE_DEREFERENCE_FUNCTION_DESCRIPTOR 1 + +#undef dereference_function_descriptor +static inline void *dereference_function_descriptor(void *ptr) +{ + struct ppc64_opd_entry *desc = ptr; + void *p; + + if (!get_kernel_nofault(p, (void *)&desc->funcaddr)) + ptr = p; + return ptr; +} + +#undef dereference_kernel_function_descriptor +static inline void *dereference_kernel_function_descriptor(void *ptr) +{ + if (ptr < (void *)__start_opd || ptr >= (void *)__end_opd) + return ptr; + + return dereference_function_descriptor(ptr); +} +#endif /* PPC64_ELF_ABI_v1 */ + +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_SECTIONS_H */ diff --git a/arch/powerpc/include/asm/secure_boot.h b/arch/powerpc/include/asm/secure_boot.h new file mode 100644 index 000000000..a2ff55691 --- /dev/null +++ b/arch/powerpc/include/asm/secure_boot.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Secure boot definitions + * + * Copyright (C) 2019 IBM Corporation + * Author: Nayna Jain + */ +#ifndef _ASM_POWER_SECURE_BOOT_H +#define _ASM_POWER_SECURE_BOOT_H + +#ifdef CONFIG_PPC_SECURE_BOOT + +bool is_ppc_secureboot_enabled(void); +bool is_ppc_trustedboot_enabled(void); + +#else + +static inline bool is_ppc_secureboot_enabled(void) +{ + return false; +} + +static inline bool is_ppc_trustedboot_enabled(void) +{ + return false; +} + +#endif +#endif diff --git a/arch/powerpc/include/asm/security_features.h b/arch/powerpc/include/asm/security_features.h new file mode 100644 index 000000000..e380acc6e --- /dev/null +++ b/arch/powerpc/include/asm/security_features.h @@ -0,0 +1,109 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Security related feature bit definitions. + * + * Copyright 2018, Michael Ellerman, IBM Corporation. + */ + +#ifndef _ASM_POWERPC_SECURITY_FEATURES_H +#define _ASM_POWERPC_SECURITY_FEATURES_H + + +extern u64 powerpc_security_features; +extern bool rfi_flush; + +/* These are bit flags */ +enum stf_barrier_type { + STF_BARRIER_NONE = 0x1, + STF_BARRIER_FALLBACK = 0x2, + STF_BARRIER_EIEIO = 0x4, + STF_BARRIER_SYNC_ORI = 0x8, +}; + +void setup_stf_barrier(void); +void do_stf_barrier_fixups(enum stf_barrier_type types); +void setup_count_cache_flush(void); + +static inline void security_ftr_set(u64 feature) +{ + powerpc_security_features |= feature; +} + +static inline void security_ftr_clear(u64 feature) +{ + powerpc_security_features &= ~feature; +} + +static inline bool security_ftr_enabled(u64 feature) +{ + return !!(powerpc_security_features & feature); +} + +#ifdef CONFIG_PPC_BOOK3S_64 +enum stf_barrier_type stf_barrier_type_get(void); +#else +static inline enum stf_barrier_type stf_barrier_type_get(void) { return STF_BARRIER_NONE; } +#endif + +// Features indicating support for Spectre/Meltdown mitigations + +// The L1-D cache can be flushed with ori r30,r30,0 +#define SEC_FTR_L1D_FLUSH_ORI30 0x0000000000000001ull + +// The L1-D cache can be flushed with mtspr 882,r0 (aka SPRN_TRIG2) +#define SEC_FTR_L1D_FLUSH_TRIG2 0x0000000000000002ull + +// ori r31,r31,0 acts as a speculation barrier +#define SEC_FTR_SPEC_BAR_ORI31 0x0000000000000004ull + +// Speculation past bctr is disabled +#define SEC_FTR_BCCTRL_SERIALISED 0x0000000000000008ull + +// Entries in L1-D are private to a SMT thread +#define SEC_FTR_L1D_THREAD_PRIV 0x0000000000000010ull + +// Indirect branch prediction cache disabled +#define SEC_FTR_COUNT_CACHE_DISABLED 0x0000000000000020ull + +// bcctr 2,0,0 triggers a hardware assisted count cache flush +#define SEC_FTR_BCCTR_FLUSH_ASSIST 0x0000000000000800ull + +// bcctr 2,0,0 triggers a hardware assisted link stack flush +#define SEC_FTR_BCCTR_LINK_FLUSH_ASSIST 0x0000000000002000ull + +// Features indicating need for Spectre/Meltdown mitigations + +// The L1-D cache should be flushed on MSR[HV] 1->0 transition (hypervisor to guest) +#define SEC_FTR_L1D_FLUSH_HV 0x0000000000000040ull + +// The L1-D cache should be flushed on MSR[PR] 0->1 transition (kernel to userspace) +#define SEC_FTR_L1D_FLUSH_PR 0x0000000000000080ull + +// A speculation barrier should be used for bounds checks (Spectre variant 1) +#define SEC_FTR_BNDS_CHK_SPEC_BAR 0x0000000000000100ull + +// Firmware configuration indicates user favours security over performance +#define SEC_FTR_FAVOUR_SECURITY 0x0000000000000200ull + +// Software required to flush count cache on context switch +#define SEC_FTR_FLUSH_COUNT_CACHE 0x0000000000000400ull + +// Software required to flush link stack on context switch +#define SEC_FTR_FLUSH_LINK_STACK 0x0000000000001000ull + +// The L1-D cache should be flushed when entering the kernel +#define SEC_FTR_L1D_FLUSH_ENTRY 0x0000000000004000ull + +// The L1-D cache should be flushed after user accesses from the kernel +#define SEC_FTR_L1D_FLUSH_UACCESS 0x0000000000008000ull + +// Features enabled by default +#define SEC_FTR_DEFAULT \ + (SEC_FTR_L1D_FLUSH_HV | \ + SEC_FTR_L1D_FLUSH_PR | \ + SEC_FTR_BNDS_CHK_SPEC_BAR | \ + SEC_FTR_L1D_FLUSH_ENTRY | \ + SEC_FTR_L1D_FLUSH_UACCESS | \ + SEC_FTR_FAVOUR_SECURITY) + +#endif /* _ASM_POWERPC_SECURITY_FEATURES_H */ diff --git a/arch/powerpc/include/asm/secvar.h b/arch/powerpc/include/asm/secvar.h new file mode 100644 index 000000000..4cc35b58b --- /dev/null +++ b/arch/powerpc/include/asm/secvar.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2019 IBM Corporation + * Author: Nayna Jain + * + * PowerPC secure variable operations. + */ +#ifndef SECVAR_OPS_H +#define SECVAR_OPS_H + +#include <linux/types.h> +#include <linux/errno.h> + +extern const struct secvar_operations *secvar_ops; + +struct secvar_operations { + int (*get)(const char *key, uint64_t key_len, u8 *data, + uint64_t *data_size); + int (*get_next)(const char *key, uint64_t *key_len, + uint64_t keybufsize); + int (*set)(const char *key, uint64_t key_len, u8 *data, + uint64_t data_size); +}; + +#ifdef CONFIG_PPC_SECURE_BOOT + +extern void set_secvar_ops(const struct secvar_operations *ops); + +#else + +static inline void set_secvar_ops(const struct secvar_operations *ops) { } + +#endif + +#endif diff --git a/arch/powerpc/include/asm/serial.h b/arch/powerpc/include/asm/serial.h new file mode 100644 index 000000000..cd6c18d0e --- /dev/null +++ b/arch/powerpc/include/asm/serial.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + */ +#ifndef _ASM_POWERPC_SERIAL_H +#define _ASM_POWERPC_SERIAL_H + +/* + * Serial ports are not listed here, because they are discovered + * through the device tree. + */ + +/* Default baud base if not found in device-tree */ +#define BASE_BAUD ( 1843200 / 16 ) + +#ifdef CONFIG_PPC_UDBG_16550 +extern void find_legacy_serial_ports(void); +#else +#define find_legacy_serial_ports() do { } while (0) +#endif + +#endif /* _PPC64_SERIAL_H */ diff --git a/arch/powerpc/include/asm/setjmp.h b/arch/powerpc/include/asm/setjmp.h new file mode 100644 index 000000000..f798e80e4 --- /dev/null +++ b/arch/powerpc/include/asm/setjmp.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright © 2008 Michael Neuling IBM Corporation + */ +#ifndef _ASM_POWERPC_SETJMP_H +#define _ASM_POWERPC_SETJMP_H + +#define JMP_BUF_LEN 23 + +typedef long jmp_buf[JMP_BUF_LEN]; + +extern int setjmp(jmp_buf env) __attribute__((returns_twice)); +extern void longjmp(jmp_buf env, int val) __attribute__((noreturn)); + +#endif /* _ASM_POWERPC_SETJMP_H */ diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h new file mode 100644 index 000000000..a46674970 --- /dev/null +++ b/arch/powerpc/include/asm/setup.h @@ -0,0 +1,84 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_SETUP_H +#define _ASM_POWERPC_SETUP_H + +#include <uapi/asm/setup.h> + +#ifndef __ASSEMBLY__ +extern void ppc_printk_progress(char *s, unsigned short hex); + +extern unsigned int rtas_data; +extern unsigned long long memory_limit; +extern bool init_mem_is_free; +extern unsigned long klimit; +extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask); + +struct device_node; +extern void note_scsi_host(struct device_node *, void *); + +/* Used in very early kernel initialization. */ +extern unsigned long reloc_offset(void); +extern unsigned long add_reloc_offset(unsigned long); +extern void reloc_got2(unsigned long); + +#define PTRRELOC(x) ((typeof(x)) add_reloc_offset((unsigned long)(x))) + +void check_for_initrd(void); +void mem_topology_setup(void); +void initmem_init(void); +void setup_panic(void); +#define ARCH_PANIC_TIMEOUT 180 + +#ifdef CONFIG_PPC_PSERIES +extern bool pseries_enable_reloc_on_exc(void); +extern void pseries_disable_reloc_on_exc(void); +extern void pseries_big_endian_exceptions(void); +extern void pseries_little_endian_exceptions(void); +#else +static inline bool pseries_enable_reloc_on_exc(void) { return false; } +static inline void pseries_disable_reloc_on_exc(void) {} +static inline void pseries_big_endian_exceptions(void) {} +static inline void pseries_little_endian_exceptions(void) {} +#endif /* CONFIG_PPC_PSERIES */ + +void rfi_flush_enable(bool enable); + +/* These are bit flags */ +enum l1d_flush_type { + L1D_FLUSH_NONE = 0x1, + L1D_FLUSH_FALLBACK = 0x2, + L1D_FLUSH_ORI = 0x4, + L1D_FLUSH_MTTRIG = 0x8, +}; + +void setup_rfi_flush(enum l1d_flush_type, bool enable); +void setup_entry_flush(bool enable); +void setup_uaccess_flush(bool enable); +void do_rfi_flush_fixups(enum l1d_flush_type types); +#ifdef CONFIG_PPC_BARRIER_NOSPEC +void setup_barrier_nospec(void); +#else +static inline void setup_barrier_nospec(void) { }; +#endif +void do_uaccess_flush_fixups(enum l1d_flush_type types); +void do_entry_flush_fixups(enum l1d_flush_type types); +void do_barrier_nospec_fixups(bool enable); +extern bool barrier_nospec_enabled; + +#ifdef CONFIG_PPC_BARRIER_NOSPEC +void do_barrier_nospec_fixups_range(bool enable, void *start, void *end); +#else +static inline void do_barrier_nospec_fixups_range(bool enable, void *start, void *end) { }; +#endif + +#ifdef CONFIG_PPC_FSL_BOOK3E +void setup_spectre_v2(void); +#else +static inline void setup_spectre_v2(void) {}; +#endif +void do_btb_flush_fixups(void); + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_SETUP_H */ + diff --git a/arch/powerpc/include/asm/sfp-machine.h b/arch/powerpc/include/asm/sfp-machine.h new file mode 100644 index 000000000..8b957aabb --- /dev/null +++ b/arch/powerpc/include/asm/sfp-machine.h @@ -0,0 +1,343 @@ +/* Machine-dependent software floating-point definitions. PPC version. + Copyright (C) 1997 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with the GNU C Library; see the file COPYING.LIB. If + not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + + Actually, this is a PPC (32bit) version, written based on the + i386, sparc, and sparc64 versions, by me, + Peter Maydell (pmaydell@chiark.greenend.org.uk). + Comments are by and large also mine, although they may be inaccurate. + + In picking out asm fragments I've gone with the lowest common + denominator, which also happens to be the hardware I have :-> + That is, a SPARC without hardware multiply and divide. + */ + +/* basic word size definitions */ +#define _FP_W_TYPE_SIZE 32 +#define _FP_W_TYPE unsigned int +#define _FP_WS_TYPE signed int +#define _FP_I_TYPE int + +#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2)) +#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1)) +#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2)) + +/* You can optionally code some things like addition in asm. For + * example, i386 defines __FP_FRAC_ADD_2 as asm. If you don't + * then you get a fragment of C code [if you change an #ifdef 0 + * in op-2.h] or a call to add_ssaaaa (see below). + * Good places to look for asm fragments to use are gcc and glibc. + * gcc's longlong.h is useful. + */ + +/* We need to know how to multiply and divide. If the host word size + * is >= 2*fracbits you can use FP_MUL_MEAT_n_imm(t,R,X,Y) which + * codes the multiply with whatever gcc does to 'a * b'. + * _FP_MUL_MEAT_n_wide(t,R,X,Y,f) is used when you have an asm + * function that can multiply two 1W values and get a 2W result. + * Otherwise you're stuck with _FP_MUL_MEAT_n_hard(t,R,X,Y) which + * does bitshifting to avoid overflow. + * For division there is FP_DIV_MEAT_n_imm(t,R,X,Y,f) for word size + * >= 2*fracbits, where f is either _FP_DIV_HELP_imm or + * _FP_DIV_HELP_ldiv (see op-1.h). + * _FP_DIV_MEAT_udiv() is if you have asm to do 2W/1W => (1W, 1W). + * [GCC and glibc have longlong.h which has the asm macro udiv_qrnnd + * to do this.] + * In general, 'n' is the number of words required to hold the type, + * and 't' is either S, D or Q for single/double/quad. + * -- PMM + */ +/* Example: SPARC64: + * #define _FP_MUL_MEAT_S(R,X,Y) _FP_MUL_MEAT_1_imm(S,R,X,Y) + * #define _FP_MUL_MEAT_D(R,X,Y) _FP_MUL_MEAT_1_wide(D,R,X,Y,umul_ppmm) + * #define _FP_MUL_MEAT_Q(R,X,Y) _FP_MUL_MEAT_2_wide(Q,R,X,Y,umul_ppmm) + * + * #define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_imm(S,R,X,Y,_FP_DIV_HELP_imm) + * #define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_1_udiv(D,R,X,Y) + * #define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_2_udiv_64(Q,R,X,Y) + * + * Example: i386: + * #define _FP_MUL_MEAT_S(R,X,Y) _FP_MUL_MEAT_1_wide(S,R,X,Y,_i386_mul_32_64) + * #define _FP_MUL_MEAT_D(R,X,Y) _FP_MUL_MEAT_2_wide(D,R,X,Y,_i386_mul_32_64) + * + * #define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y,_i386_div_64_32) + * #define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv_64(D,R,X,Y) + */ + +#define _FP_MUL_MEAT_S(R,X,Y) _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm) +#define _FP_MUL_MEAT_D(R,X,Y) _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm) + +#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv_norm(S,R,X,Y) +#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv(D,R,X,Y) + +/* These macros define what NaN looks like. They're supposed to expand to + * a comma-separated set of 32bit unsigned ints that encode NaN. + */ +#define _FP_NANFRAC_S ((_FP_QNANBIT_S << 1) - 1) +#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1), -1 +#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1 +#define _FP_NANSIGN_S 0 +#define _FP_NANSIGN_D 0 +#define _FP_NANSIGN_Q 0 + +#define _FP_KEEPNANFRACP 1 + +#ifdef FP_EX_BOOKE_E500_SPE +#define FP_EX_INEXACT (1 << 21) +#define FP_EX_INVALID (1 << 20) +#define FP_EX_DIVZERO (1 << 19) +#define FP_EX_UNDERFLOW (1 << 18) +#define FP_EX_OVERFLOW (1 << 17) +#define FP_INHIBIT_RESULTS 0 + +#define __FPU_FPSCR (current->thread.spefscr) +#define __FPU_ENABLED_EXC \ +({ \ + (__FPU_FPSCR >> 2) & 0x1f; \ +}) +#else +/* Exception flags. We use the bit positions of the appropriate bits + in the FPSCR, which also correspond to the FE_* bits. This makes + everything easier ;-). */ +#define FP_EX_INVALID (1 << (31 - 2)) +#define FP_EX_INVALID_SNAN EFLAG_VXSNAN +#define FP_EX_INVALID_ISI EFLAG_VXISI +#define FP_EX_INVALID_IDI EFLAG_VXIDI +#define FP_EX_INVALID_ZDZ EFLAG_VXZDZ +#define FP_EX_INVALID_IMZ EFLAG_VXIMZ +#define FP_EX_OVERFLOW (1 << (31 - 3)) +#define FP_EX_UNDERFLOW (1 << (31 - 4)) +#define FP_EX_DIVZERO (1 << (31 - 5)) +#define FP_EX_INEXACT (1 << (31 - 6)) + +#define __FPU_FPSCR (current->thread.fp_state.fpscr) + +/* We only actually write to the destination register + * if exceptions signalled (if any) will not trap. + */ +#define __FPU_ENABLED_EXC \ +({ \ + (__FPU_FPSCR >> 3) & 0x1f; \ +}) + +#endif + +/* + * If one NaN is signaling and the other is not, + * we choose that one, otherwise we choose X. + */ +#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \ + do { \ + if ((_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs) \ + && !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs)) \ + { \ + R##_s = X##_s; \ + _FP_FRAC_COPY_##wc(R,X); \ + } \ + else \ + { \ + R##_s = Y##_s; \ + _FP_FRAC_COPY_##wc(R,Y); \ + } \ + R##_c = FP_CLS_NAN; \ + } while (0) + + +#include <linux/kernel.h> +#include <linux/sched.h> + +#define __FPU_TRAP_P(bits) \ + ((__FPU_ENABLED_EXC & (bits)) != 0) + +#define __FP_PACK_S(val,X) \ +({ int __exc = _FP_PACK_CANONICAL(S,1,X); \ + if(!__exc || !__FPU_TRAP_P(__exc)) \ + _FP_PACK_RAW_1_P(S,val,X); \ + __exc; \ +}) + +#define __FP_PACK_D(val,X) \ + do { \ + _FP_PACK_CANONICAL(D, 2, X); \ + if (!FP_CUR_EXCEPTIONS || !__FPU_TRAP_P(FP_CUR_EXCEPTIONS)) \ + _FP_PACK_RAW_2_P(D, val, X); \ + } while (0) + +#define __FP_PACK_DS(val,X) \ + do { \ + FP_DECL_S(__X); \ + FP_CONV(S, D, 1, 2, __X, X); \ + _FP_PACK_CANONICAL(S, 1, __X); \ + if (!FP_CUR_EXCEPTIONS || !__FPU_TRAP_P(FP_CUR_EXCEPTIONS)) { \ + _FP_UNPACK_CANONICAL(S, 1, __X); \ + FP_CONV(D, S, 2, 1, X, __X); \ + _FP_PACK_CANONICAL(D, 2, X); \ + if (!FP_CUR_EXCEPTIONS || !__FPU_TRAP_P(FP_CUR_EXCEPTIONS)) \ + _FP_PACK_RAW_2_P(D, val, X); \ + } \ + } while (0) + +/* Obtain the current rounding mode. */ +#define FP_ROUNDMODE \ +({ \ + __FPU_FPSCR & 0x3; \ +}) + +/* the asm fragments go here: all these are taken from glibc-2.0.5's + * stdlib/longlong.h + */ + +#include <linux/types.h> +#include <asm/byteorder.h> + +/* add_ssaaaa is used in op-2.h and should be equivalent to + * #define add_ssaaaa(sh,sl,ah,al,bh,bl) (sh = ah+bh+ (( sl = al+bl) < al)) + * add_ssaaaa(high_sum, low_sum, high_addend_1, low_addend_1, + * high_addend_2, low_addend_2) adds two UWtype integers, composed by + * HIGH_ADDEND_1 and LOW_ADDEND_1, and HIGH_ADDEND_2 and LOW_ADDEND_2 + * respectively. The result is placed in HIGH_SUM and LOW_SUM. Overflow + * (i.e. carry out) is not stored anywhere, and is lost. + */ +#define add_ssaaaa(sh, sl, ah, al, bh, bl) \ + do { \ + if (__builtin_constant_p (bh) && (bh) == 0) \ + __asm__ ("add%I4c %1,%3,%4\n\taddze %0,%2" \ + : "=r" (sh), "=&r" (sl) : "r" (ah), "%r" (al), "rI" (bl));\ + else if (__builtin_constant_p (bh) && (bh) == ~(USItype) 0) \ + __asm__ ("add%I4c %1,%3,%4\n\taddme %0,%2" \ + : "=r" (sh), "=&r" (sl) : "r" (ah), "%r" (al), "rI" (bl));\ + else \ + __asm__ ("add%I5c %1,%4,%5\n\tadde %0,%2,%3" \ + : "=r" (sh), "=&r" (sl) \ + : "%r" (ah), "r" (bh), "%r" (al), "rI" (bl)); \ + } while (0) + +/* sub_ddmmss is used in op-2.h and udivmodti4.c and should be equivalent to + * #define sub_ddmmss(sh, sl, ah, al, bh, bl) (sh = ah-bh - ((sl = al-bl) > al)) + * sub_ddmmss(high_difference, low_difference, high_minuend, low_minuend, + * high_subtrahend, low_subtrahend) subtracts two two-word UWtype integers, + * composed by HIGH_MINUEND_1 and LOW_MINUEND_1, and HIGH_SUBTRAHEND_2 and + * LOW_SUBTRAHEND_2 respectively. The result is placed in HIGH_DIFFERENCE + * and LOW_DIFFERENCE. Overflow (i.e. carry out) is not stored anywhere, + * and is lost. + */ +#define sub_ddmmss(sh, sl, ah, al, bh, bl) \ + do { \ + if (__builtin_constant_p (ah) && (ah) == 0) \ + __asm__ ("subf%I3c %1,%4,%3\n\tsubfze %0,%2" \ + : "=r" (sh), "=&r" (sl) : "r" (bh), "rI" (al), "r" (bl));\ + else if (__builtin_constant_p (ah) && (ah) == ~(USItype) 0) \ + __asm__ ("subf%I3c %1,%4,%3\n\tsubfme %0,%2" \ + : "=r" (sh), "=&r" (sl) : "r" (bh), "rI" (al), "r" (bl));\ + else if (__builtin_constant_p (bh) && (bh) == 0) \ + __asm__ ("subf%I3c %1,%4,%3\n\taddme %0,%2" \ + : "=r" (sh), "=&r" (sl) : "r" (ah), "rI" (al), "r" (bl));\ + else if (__builtin_constant_p (bh) && (bh) == ~(USItype) 0) \ + __asm__ ("subf%I3c %1,%4,%3\n\taddze %0,%2" \ + : "=r" (sh), "=&r" (sl) : "r" (ah), "rI" (al), "r" (bl));\ + else \ + __asm__ ("subf%I4c %1,%5,%4\n\tsubfe %0,%3,%2" \ + : "=r" (sh), "=&r" (sl) \ + : "r" (ah), "r" (bh), "rI" (al), "r" (bl)); \ + } while (0) + +/* asm fragments for mul and div */ + +/* umul_ppmm(high_prod, low_prod, multipler, multiplicand) multiplies two + * UWtype integers MULTIPLER and MULTIPLICAND, and generates a two UWtype + * word product in HIGH_PROD and LOW_PROD. + */ +#define umul_ppmm(ph, pl, m0, m1) \ + do { \ + USItype __m0 = (m0), __m1 = (m1); \ + __asm__ ("mulhwu %0,%1,%2" : "=r" (ph) : "%r" (m0), "r" (m1)); \ + (pl) = __m0 * __m1; \ + } while (0) + +/* udiv_qrnnd(quotient, remainder, high_numerator, low_numerator, + * denominator) divides a UDWtype, composed by the UWtype integers + * HIGH_NUMERATOR and LOW_NUMERATOR, by DENOMINATOR and places the quotient + * in QUOTIENT and the remainder in REMAINDER. HIGH_NUMERATOR must be less + * than DENOMINATOR for correct operation. If, in addition, the most + * significant bit of DENOMINATOR must be 1, then the pre-processor symbol + * UDIV_NEEDS_NORMALIZATION is defined to 1. + */ +#define udiv_qrnnd(q, r, n1, n0, d) \ + do { \ + UWtype __d1, __d0, __q1, __q0; \ + UWtype __r1, __r0, __m; \ + __d1 = __ll_highpart (d); \ + __d0 = __ll_lowpart (d); \ + \ + __r1 = (n1) % __d1; \ + __q1 = (n1) / __d1; \ + __m = (UWtype) __q1 * __d0; \ + __r1 = __r1 * __ll_B | __ll_highpart (n0); \ + if (__r1 < __m) \ + { \ + __q1--, __r1 += (d); \ + if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\ + if (__r1 < __m) \ + __q1--, __r1 += (d); \ + } \ + __r1 -= __m; \ + \ + __r0 = __r1 % __d1; \ + __q0 = __r1 / __d1; \ + __m = (UWtype) __q0 * __d0; \ + __r0 = __r0 * __ll_B | __ll_lowpart (n0); \ + if (__r0 < __m) \ + { \ + __q0--, __r0 += (d); \ + if (__r0 >= (d)) \ + if (__r0 < __m) \ + __q0--, __r0 += (d); \ + } \ + __r0 -= __m; \ + \ + (q) = (UWtype) __q1 * __ll_B | __q0; \ + (r) = __r0; \ + } while (0) + +#define UDIV_NEEDS_NORMALIZATION 1 + +#define abort() \ + return 0 + +#ifdef __BIG_ENDIAN +#define __BYTE_ORDER __BIG_ENDIAN +#else +#define __BYTE_ORDER __LITTLE_ENDIAN +#endif + +/* Exception flags. */ +#define EFLAG_INVALID (1 << (31 - 2)) +#define EFLAG_OVERFLOW (1 << (31 - 3)) +#define EFLAG_UNDERFLOW (1 << (31 - 4)) +#define EFLAG_DIVZERO (1 << (31 - 5)) +#define EFLAG_INEXACT (1 << (31 - 6)) + +#define EFLAG_VXSNAN (1 << (31 - 7)) +#define EFLAG_VXISI (1 << (31 - 8)) +#define EFLAG_VXIDI (1 << (31 - 9)) +#define EFLAG_VXZDZ (1 << (31 - 10)) +#define EFLAG_VXIMZ (1 << (31 - 11)) +#define EFLAG_VXVC (1 << (31 - 12)) +#define EFLAG_VXSOFT (1 << (31 - 21)) +#define EFLAG_VXSQRT (1 << (31 - 22)) +#define EFLAG_VXCVI (1 << (31 - 23)) diff --git a/arch/powerpc/include/asm/shmparam.h b/arch/powerpc/include/asm/shmparam.h new file mode 100644 index 000000000..bc0968839 --- /dev/null +++ b/arch/powerpc/include/asm/shmparam.h @@ -0,0 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_SHMPARAM_H +#define _ASM_POWERPC_SHMPARAM_H + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* _ASM_POWERPC_SHMPARAM_H */ diff --git a/arch/powerpc/include/asm/signal.h b/arch/powerpc/include/asm/signal.h new file mode 100644 index 000000000..99e1c6de2 --- /dev/null +++ b/arch/powerpc/include/asm/signal.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_SIGNAL_H +#define _ASM_POWERPC_SIGNAL_H + +#define __ARCH_HAS_SA_RESTORER +#include <uapi/asm/signal.h> +#include <uapi/asm/ptrace.h> + +struct pt_regs; +void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags); + +#endif /* _ASM_POWERPC_SIGNAL_H */ diff --git a/arch/powerpc/include/asm/simple_spinlock.h b/arch/powerpc/include/asm/simple_spinlock.h new file mode 100644 index 000000000..9c3c30534 --- /dev/null +++ b/arch/powerpc/include/asm/simple_spinlock.h @@ -0,0 +1,288 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_POWERPC_SIMPLE_SPINLOCK_H +#define _ASM_POWERPC_SIMPLE_SPINLOCK_H + +/* + * Simple spin lock operations. + * + * Copyright (C) 2001-2004 Paul Mackerras <paulus@au.ibm.com>, IBM + * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM + * Copyright (C) 2002 Dave Engebretsen <engebret@us.ibm.com>, IBM + * Rework to support virtual processors + * + * Type of int is used as a full 64b word is not necessary. + * + * (the type definitions are in asm/simple_spinlock_types.h) + */ +#include <linux/irqflags.h> +#include <asm/paravirt.h> +#include <asm/paca.h> +#include <asm/synch.h> +#include <asm/ppc-opcode.h> + +#ifdef CONFIG_PPC64 +/* use 0x800000yy when locked, where yy == CPU number */ +#ifdef __BIG_ENDIAN__ +#define LOCK_TOKEN (*(u32 *)(&get_paca()->lock_token)) +#else +#define LOCK_TOKEN (*(u32 *)(&get_paca()->paca_index)) +#endif +#else +#define LOCK_TOKEN 1 +#endif + +static __always_inline int arch_spin_value_unlocked(arch_spinlock_t lock) +{ + return lock.slock == 0; +} + +static inline int arch_spin_is_locked(arch_spinlock_t *lock) +{ + smp_mb(); + return !arch_spin_value_unlocked(*lock); +} + +/* + * This returns the old value in the lock, so we succeeded + * in getting the lock if the return value is 0. + */ +static inline unsigned long __arch_spin_trylock(arch_spinlock_t *lock) +{ + unsigned long tmp, token; + + token = LOCK_TOKEN; + __asm__ __volatile__( +"1: " PPC_LWARX(%0,0,%2,1) "\n\ + cmpwi 0,%0,0\n\ + bne- 2f\n\ + stwcx. %1,0,%2\n\ + bne- 1b\n" + PPC_ACQUIRE_BARRIER +"2:" + : "=&r" (tmp) + : "r" (token), "r" (&lock->slock) + : "cr0", "memory"); + + return tmp; +} + +static inline int arch_spin_trylock(arch_spinlock_t *lock) +{ + return __arch_spin_trylock(lock) == 0; +} + +/* + * On a system with shared processors (that is, where a physical + * processor is multiplexed between several virtual processors), + * there is no point spinning on a lock if the holder of the lock + * isn't currently scheduled on a physical processor. Instead + * we detect this situation and ask the hypervisor to give the + * rest of our timeslice to the lock holder. + * + * So that we can tell which virtual processor is holding a lock, + * we put 0x80000000 | smp_processor_id() in the lock when it is + * held. Conveniently, we have a word in the paca that holds this + * value. + */ + +#if defined(CONFIG_PPC_SPLPAR) +/* We only yield to the hypervisor if we are in shared processor mode */ +void splpar_spin_yield(arch_spinlock_t *lock); +void splpar_rw_yield(arch_rwlock_t *lock); +#else /* SPLPAR */ +static inline void splpar_spin_yield(arch_spinlock_t *lock) {}; +static inline void splpar_rw_yield(arch_rwlock_t *lock) {}; +#endif + +static inline void spin_yield(arch_spinlock_t *lock) +{ + if (is_shared_processor()) + splpar_spin_yield(lock); + else + barrier(); +} + +static inline void rw_yield(arch_rwlock_t *lock) +{ + if (is_shared_processor()) + splpar_rw_yield(lock); + else + barrier(); +} + +static inline void arch_spin_lock(arch_spinlock_t *lock) +{ + while (1) { + if (likely(__arch_spin_trylock(lock) == 0)) + break; + do { + HMT_low(); + if (is_shared_processor()) + splpar_spin_yield(lock); + } while (unlikely(lock->slock != 0)); + HMT_medium(); + } +} + +static inline +void arch_spin_lock_flags(arch_spinlock_t *lock, unsigned long flags) +{ + unsigned long flags_dis; + + while (1) { + if (likely(__arch_spin_trylock(lock) == 0)) + break; + local_save_flags(flags_dis); + local_irq_restore(flags); + do { + HMT_low(); + if (is_shared_processor()) + splpar_spin_yield(lock); + } while (unlikely(lock->slock != 0)); + HMT_medium(); + local_irq_restore(flags_dis); + } +} +#define arch_spin_lock_flags arch_spin_lock_flags + +static inline void arch_spin_unlock(arch_spinlock_t *lock) +{ + __asm__ __volatile__("# arch_spin_unlock\n\t" + PPC_RELEASE_BARRIER: : :"memory"); + lock->slock = 0; +} + +/* + * Read-write spinlocks, allowing multiple readers + * but only one writer. + * + * NOTE! it is quite common to have readers in interrupts + * but no interrupt writers. For those circumstances we + * can "mix" irq-safe locks - any writer needs to get a + * irq-safe write-lock, but readers can get non-irqsafe + * read-locks. + */ + +#ifdef CONFIG_PPC64 +#define __DO_SIGN_EXTEND "extsw %0,%0\n" +#define WRLOCK_TOKEN LOCK_TOKEN /* it's negative */ +#else +#define __DO_SIGN_EXTEND +#define WRLOCK_TOKEN (-1) +#endif + +/* + * This returns the old value in the lock + 1, + * so we got a read lock if the return value is > 0. + */ +static inline long __arch_read_trylock(arch_rwlock_t *rw) +{ + long tmp; + + __asm__ __volatile__( +"1: " PPC_LWARX(%0,0,%1,1) "\n" + __DO_SIGN_EXTEND +" addic. %0,%0,1\n\ + ble- 2f\n" +" stwcx. %0,0,%1\n\ + bne- 1b\n" + PPC_ACQUIRE_BARRIER +"2:" : "=&r" (tmp) + : "r" (&rw->lock) + : "cr0", "xer", "memory"); + + return tmp; +} + +/* + * This returns the old value in the lock, + * so we got the write lock if the return value is 0. + */ +static inline long __arch_write_trylock(arch_rwlock_t *rw) +{ + long tmp, token; + + token = WRLOCK_TOKEN; + __asm__ __volatile__( +"1: " PPC_LWARX(%0,0,%2,1) "\n\ + cmpwi 0,%0,0\n\ + bne- 2f\n" +" stwcx. %1,0,%2\n\ + bne- 1b\n" + PPC_ACQUIRE_BARRIER +"2:" : "=&r" (tmp) + : "r" (token), "r" (&rw->lock) + : "cr0", "memory"); + + return tmp; +} + +static inline void arch_read_lock(arch_rwlock_t *rw) +{ + while (1) { + if (likely(__arch_read_trylock(rw) > 0)) + break; + do { + HMT_low(); + if (is_shared_processor()) + splpar_rw_yield(rw); + } while (unlikely(rw->lock < 0)); + HMT_medium(); + } +} + +static inline void arch_write_lock(arch_rwlock_t *rw) +{ + while (1) { + if (likely(__arch_write_trylock(rw) == 0)) + break; + do { + HMT_low(); + if (is_shared_processor()) + splpar_rw_yield(rw); + } while (unlikely(rw->lock != 0)); + HMT_medium(); + } +} + +static inline int arch_read_trylock(arch_rwlock_t *rw) +{ + return __arch_read_trylock(rw) > 0; +} + +static inline int arch_write_trylock(arch_rwlock_t *rw) +{ + return __arch_write_trylock(rw) == 0; +} + +static inline void arch_read_unlock(arch_rwlock_t *rw) +{ + long tmp; + + __asm__ __volatile__( + "# read_unlock\n\t" + PPC_RELEASE_BARRIER +"1: lwarx %0,0,%1\n\ + addic %0,%0,-1\n" +" stwcx. %0,0,%1\n\ + bne- 1b" + : "=&r"(tmp) + : "r"(&rw->lock) + : "cr0", "xer", "memory"); +} + +static inline void arch_write_unlock(arch_rwlock_t *rw) +{ + __asm__ __volatile__("# write_unlock\n\t" + PPC_RELEASE_BARRIER: : :"memory"); + rw->lock = 0; +} + +#define arch_spin_relax(lock) spin_yield(lock) +#define arch_read_relax(lock) rw_yield(lock) +#define arch_write_relax(lock) rw_yield(lock) + +/* See include/linux/spinlock.h */ +#define smp_mb__after_spinlock() smp_mb() + +#endif /* _ASM_POWERPC_SIMPLE_SPINLOCK_H */ diff --git a/arch/powerpc/include/asm/simple_spinlock_types.h b/arch/powerpc/include/asm/simple_spinlock_types.h new file mode 100644 index 000000000..0f3cdd8fa --- /dev/null +++ b/arch/powerpc/include/asm/simple_spinlock_types.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_SIMPLE_SPINLOCK_TYPES_H +#define _ASM_POWERPC_SIMPLE_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +typedef struct { + volatile unsigned int slock; +} arch_spinlock_t; + +#define __ARCH_SPIN_LOCK_UNLOCKED { 0 } + +typedef struct { + volatile signed int lock; +} arch_rwlock_t; + +#define __ARCH_RW_LOCK_UNLOCKED { 0 } + +#endif /* _ASM_POWERPC_SIMPLE_SPINLOCK_TYPES_H */ diff --git a/arch/powerpc/include/asm/slice.h b/arch/powerpc/include/asm/slice.h new file mode 100644 index 000000000..0bdd9c62e --- /dev/null +++ b/arch/powerpc/include/asm/slice.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_SLICE_H +#define _ASM_POWERPC_SLICE_H + +#ifdef CONFIG_PPC_BOOK3S_64 +#include <asm/book3s/64/slice.h> +#endif + +#ifndef __ASSEMBLY__ + +struct mm_struct; + +#ifdef CONFIG_PPC_MM_SLICES + +#ifdef CONFIG_HUGETLB_PAGE +#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA +#endif +#define HAVE_ARCH_UNMAPPED_AREA +#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN + +unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len, + unsigned long flags, unsigned int psize, + int topdown); + +unsigned int get_slice_psize(struct mm_struct *mm, unsigned long addr); + +void slice_set_range_psize(struct mm_struct *mm, unsigned long start, + unsigned long len, unsigned int psize); + +void slice_init_new_context_exec(struct mm_struct *mm); +void slice_setup_new_exec(void); + +#else /* CONFIG_PPC_MM_SLICES */ + +static inline void slice_init_new_context_exec(struct mm_struct *mm) {} + +static inline unsigned int get_slice_psize(struct mm_struct *mm, unsigned long addr) +{ + return 0; +} + +#endif /* CONFIG_PPC_MM_SLICES */ + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_SLICE_H */ diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h new file mode 100644 index 000000000..635bdf947 --- /dev/null +++ b/arch/powerpc/include/asm/smp.h @@ -0,0 +1,271 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * smp.h: PowerPC-specific SMP code. + * + * Original was a copy of sparc smp.h. Now heavily modified + * for PPC. + * + * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1996-2001 Cort Dougan <cort@fsmlabs.com> + */ + +#ifndef _ASM_POWERPC_SMP_H +#define _ASM_POWERPC_SMP_H +#ifdef __KERNEL__ + +#include <linux/threads.h> +#include <linux/cpumask.h> +#include <linux/kernel.h> +#include <linux/irqreturn.h> + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_PPC64 +#include <asm/paca.h> +#endif +#include <asm/percpu.h> + +extern int boot_cpuid; +extern int spinning_secondaries; +extern u32 *cpu_to_phys_id; +extern bool coregroup_enabled; + +extern int cpu_to_chip_id(int cpu); + +#ifdef CONFIG_SMP + +struct smp_ops_t { + void (*message_pass)(int cpu, int msg); +#ifdef CONFIG_PPC_SMP_MUXED_IPI + void (*cause_ipi)(int cpu); +#endif + int (*cause_nmi_ipi)(int cpu); + void (*probe)(void); + int (*kick_cpu)(int nr); + int (*prepare_cpu)(int nr); + void (*setup_cpu)(int nr); + void (*bringup_done)(void); + void (*take_timebase)(void); + void (*give_timebase)(void); + int (*cpu_disable)(void); + void (*cpu_die)(unsigned int nr); + int (*cpu_bootable)(unsigned int nr); +#ifdef CONFIG_HOTPLUG_CPU + void (*cpu_offline_self)(void); +#endif +}; + +extern int smp_send_nmi_ipi(int cpu, void (*fn)(struct pt_regs *), u64 delay_us); +extern int smp_send_safe_nmi_ipi(int cpu, void (*fn)(struct pt_regs *), u64 delay_us); +extern void smp_send_debugger_break(void); +extern void start_secondary_resume(void); +extern void smp_generic_give_timebase(void); +extern void smp_generic_take_timebase(void); + +DECLARE_PER_CPU(unsigned int, cpu_pvr); + +#ifdef CONFIG_HOTPLUG_CPU +int generic_cpu_disable(void); +void generic_cpu_die(unsigned int cpu); +void generic_set_cpu_dead(unsigned int cpu); +void generic_set_cpu_up(unsigned int cpu); +int generic_check_cpu_restart(unsigned int cpu); +int is_cpu_dead(unsigned int cpu); +#else +#define generic_set_cpu_up(i) do { } while (0) +#endif + +#ifdef CONFIG_PPC64 +#define raw_smp_processor_id() (local_paca->paca_index) +#define hard_smp_processor_id() (get_paca()->hw_cpu_id) +#else +/* 32-bit */ +extern int smp_hw_index[]; + +/* + * This is particularly ugly: it appears we can't actually get the definition + * of task_struct here, but we need access to the CPU this task is running on. + * Instead of using task_struct we're using _TASK_CPU which is extracted from + * asm-offsets.h by kbuild to get the current processor ID. + * + * This also needs to be safeguarded when building asm-offsets.s because at + * that time _TASK_CPU is not defined yet. It could have been guarded by + * _TASK_CPU itself, but we want the build to fail if _TASK_CPU is missing + * when building something else than asm-offsets.s + */ +#ifdef GENERATING_ASM_OFFSETS +#define raw_smp_processor_id() (0) +#else +#define raw_smp_processor_id() (*(unsigned int *)((void *)current + _TASK_CPU)) +#endif +#define hard_smp_processor_id() (smp_hw_index[smp_processor_id()]) + +static inline int get_hard_smp_processor_id(int cpu) +{ + return smp_hw_index[cpu]; +} + +static inline void set_hard_smp_processor_id(int cpu, int phys) +{ + smp_hw_index[cpu] = phys; +} +#endif + +DECLARE_PER_CPU(cpumask_var_t, cpu_sibling_map); +DECLARE_PER_CPU(cpumask_var_t, cpu_l2_cache_map); +DECLARE_PER_CPU(cpumask_var_t, cpu_core_map); +DECLARE_PER_CPU(cpumask_var_t, cpu_smallcore_map); + +static inline struct cpumask *cpu_sibling_mask(int cpu) +{ + return per_cpu(cpu_sibling_map, cpu); +} + +static inline struct cpumask *cpu_core_mask(int cpu) +{ + return per_cpu(cpu_core_map, cpu); +} + +static inline struct cpumask *cpu_l2_cache_mask(int cpu) +{ + return per_cpu(cpu_l2_cache_map, cpu); +} + +static inline struct cpumask *cpu_smallcore_mask(int cpu) +{ + return per_cpu(cpu_smallcore_map, cpu); +} + +extern int cpu_to_core_id(int cpu); + +extern bool has_big_cores; + +#define cpu_smt_mask cpu_smt_mask +#ifdef CONFIG_SCHED_SMT +static inline const struct cpumask *cpu_smt_mask(int cpu) +{ + if (has_big_cores) + return per_cpu(cpu_smallcore_map, cpu); + + return per_cpu(cpu_sibling_map, cpu); +} +#endif /* CONFIG_SCHED_SMT */ + +/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers. + * + * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up + * in /proc/interrupts will be wrong!!! --Troy */ +#define PPC_MSG_CALL_FUNCTION 0 +#define PPC_MSG_RESCHEDULE 1 +#define PPC_MSG_TICK_BROADCAST 2 +#define PPC_MSG_NMI_IPI 3 + +/* This is only used by the powernv kernel */ +#define PPC_MSG_RM_HOST_ACTION 4 + +#define NMI_IPI_ALL_OTHERS -2 + +#ifdef CONFIG_NMI_IPI +extern int smp_handle_nmi_ipi(struct pt_regs *regs); +#else +static inline int smp_handle_nmi_ipi(struct pt_regs *regs) { return 0; } +#endif + +/* for irq controllers that have dedicated ipis per message (4) */ +extern int smp_request_message_ipi(int virq, int message); +extern const char *smp_ipi_name[]; + +/* for irq controllers with only a single ipi */ +extern void smp_muxed_ipi_message_pass(int cpu, int msg); +extern void smp_muxed_ipi_set_message(int cpu, int msg); +extern irqreturn_t smp_ipi_demux(void); +extern irqreturn_t smp_ipi_demux_relaxed(void); + +void smp_init_pSeries(void); +void smp_init_cell(void); +void smp_setup_cpu_maps(void); + +extern int __cpu_disable(void); +extern void __cpu_die(unsigned int cpu); + +#else +/* for UP */ +#define hard_smp_processor_id() get_hard_smp_processor_id(0) +#define smp_setup_cpu_maps() +static inline void inhibit_secondary_onlining(void) {} +static inline void uninhibit_secondary_onlining(void) {} +static inline const struct cpumask *cpu_sibling_mask(int cpu) +{ + return cpumask_of(cpu); +} + +static inline const struct cpumask *cpu_smallcore_mask(int cpu) +{ + return cpumask_of(cpu); +} + +#endif /* CONFIG_SMP */ + +#ifdef CONFIG_PPC64 +static inline int get_hard_smp_processor_id(int cpu) +{ + return paca_ptrs[cpu]->hw_cpu_id; +} + +static inline void set_hard_smp_processor_id(int cpu, int phys) +{ + paca_ptrs[cpu]->hw_cpu_id = phys; +} +#else +/* 32-bit */ +#ifndef CONFIG_SMP +extern int boot_cpuid_phys; +static inline int get_hard_smp_processor_id(int cpu) +{ + return boot_cpuid_phys; +} + +static inline void set_hard_smp_processor_id(int cpu, int phys) +{ + boot_cpuid_phys = phys; +} +#endif /* !CONFIG_SMP */ +#endif /* !CONFIG_PPC64 */ + +#if defined(CONFIG_PPC64) && (defined(CONFIG_SMP) || defined(CONFIG_KEXEC_CORE)) +extern void smp_release_cpus(void); +#else +static inline void smp_release_cpus(void) { }; +#endif + +extern int smt_enabled_at_boot; + +extern void smp_mpic_probe(void); +extern void smp_mpic_setup_cpu(int cpu); +extern int smp_generic_kick_cpu(int nr); +extern int smp_generic_cpu_bootable(unsigned int nr); + + +extern void smp_generic_give_timebase(void); +extern void smp_generic_take_timebase(void); + +extern struct smp_ops_t *smp_ops; + +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); + +/* Definitions relative to the secondary CPU spin loop + * and entry point. Not all of them exist on both 32 and + * 64-bit but defining them all here doesn't harm + */ +extern void generic_secondary_smp_init(void); +extern unsigned long __secondary_hold_spinloop; +extern unsigned long __secondary_hold_acknowledge; +extern char __secondary_hold; +extern unsigned int booting_thread_hwid; + +extern void __early_start(void); +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_SMP_H) */ diff --git a/arch/powerpc/include/asm/smu.h b/arch/powerpc/include/asm/smu.h new file mode 100644 index 000000000..4b30a0205 --- /dev/null +++ b/arch/powerpc/include/asm/smu.h @@ -0,0 +1,694 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _SMU_H +#define _SMU_H + +/* + * Definitions for talking to the SMU chip in newer G5 PowerMacs + */ +#ifdef __KERNEL__ +#include <linux/list.h> +#endif +#include <linux/types.h> + +/* + * Known SMU commands + * + * Most of what is below comes from looking at the Open Firmware driver, + * though this is still incomplete and could use better documentation here + * or there... + */ + + +/* + * Partition info commands + * + * These commands are used to retrieve the sdb-partition-XX datas from + * the SMU. The length is always 2. First byte is the subcommand code + * and second byte is the partition ID. + * + * The reply is 6 bytes: + * + * - 0..1 : partition address + * - 2 : a byte containing the partition ID + * - 3 : length (maybe other bits are rest of header ?) + * + * The data must then be obtained with calls to another command: + * SMU_CMD_MISC_ee_GET_DATABLOCK_REC (described below). + */ +#define SMU_CMD_PARTITION_COMMAND 0x3e +#define SMU_CMD_PARTITION_LATEST 0x01 +#define SMU_CMD_PARTITION_BASE 0x02 +#define SMU_CMD_PARTITION_UPDATE 0x03 + + +/* + * Fan control + * + * This is a "mux" for fan control commands. The command seem to + * act differently based on the number of arguments. With 1 byte + * of argument, this seem to be queries for fans status, setpoint, + * etc..., while with 0xe arguments, we will set the fans speeds. + * + * Queries (1 byte arg): + * --------------------- + * + * arg=0x01: read RPM fans status + * arg=0x02: read RPM fans setpoint + * arg=0x11: read PWM fans status + * arg=0x12: read PWM fans setpoint + * + * the "status" queries return the current speed while the "setpoint" ones + * return the programmed/target speed. It _seems_ that the result is a bit + * mask in the first byte of active/available fans, followed by 6 words (16 + * bits) containing the requested speed. + * + * Setpoint (14 bytes arg): + * ------------------------ + * + * first arg byte is 0 for RPM fans and 0x10 for PWM. Second arg byte is the + * mask of fans affected by the command. Followed by 6 words containing the + * setpoint value for selected fans in the mask (or 0 if mask value is 0) + */ +#define SMU_CMD_FAN_COMMAND 0x4a + + +/* + * Battery access + * + * Same command number as the PMU, could it be same syntax ? + */ +#define SMU_CMD_BATTERY_COMMAND 0x6f +#define SMU_CMD_GET_BATTERY_INFO 0x00 + +/* + * Real time clock control + * + * This is a "mux", first data byte contains the "sub" command. + * The "RTC" part of the SMU controls the date, time, powerup + * timer, but also a PRAM + * + * Dates are in BCD format on 7 bytes: + * [sec] [min] [hour] [weekday] [month day] [month] [year] + * with month being 1 based and year minus 100 + */ +#define SMU_CMD_RTC_COMMAND 0x8e +#define SMU_CMD_RTC_SET_PWRUP_TIMER 0x00 /* i: 7 bytes date */ +#define SMU_CMD_RTC_GET_PWRUP_TIMER 0x01 /* o: 7 bytes date */ +#define SMU_CMD_RTC_STOP_PWRUP_TIMER 0x02 +#define SMU_CMD_RTC_SET_PRAM_BYTE_ACC 0x20 /* i: 1 byte (address?) */ +#define SMU_CMD_RTC_SET_PRAM_AUTOINC 0x21 /* i: 1 byte (data?) */ +#define SMU_CMD_RTC_SET_PRAM_LO_BYTES 0x22 /* i: 10 bytes */ +#define SMU_CMD_RTC_SET_PRAM_HI_BYTES 0x23 /* i: 10 bytes */ +#define SMU_CMD_RTC_GET_PRAM_BYTE 0x28 /* i: 1 bytes (address?) */ +#define SMU_CMD_RTC_GET_PRAM_LO_BYTES 0x29 /* o: 10 bytes */ +#define SMU_CMD_RTC_GET_PRAM_HI_BYTES 0x2a /* o: 10 bytes */ +#define SMU_CMD_RTC_SET_DATETIME 0x80 /* i: 7 bytes date */ +#define SMU_CMD_RTC_GET_DATETIME 0x81 /* o: 7 bytes date */ + + /* + * i2c commands + * + * To issue an i2c command, first is to send a parameter block to + * the SMU. This is a command of type 0x9a with 9 bytes of header + * eventually followed by data for a write: + * + * 0: bus number (from device-tree usually, SMU has lots of busses !) + * 1: transfer type/format (see below) + * 2: device address. For combined and combined4 type transfers, this + * is the "write" version of the address (bit 0x01 cleared) + * 3: subaddress length (0..3) + * 4: subaddress byte 0 (or only byte for subaddress length 1) + * 5: subaddress byte 1 + * 6: subaddress byte 2 + * 7: combined address (device address for combined mode data phase) + * 8: data length + * + * The transfer types are the same good old Apple ones it seems, + * that is: + * - 0x00: Simple transfer + * - 0x01: Subaddress transfer (addr write + data tx, no restart) + * - 0x02: Combined transfer (addr write + restart + data tx) + * + * This is then followed by actual data for a write. + * + * At this point, the OF driver seems to have a limitation on transfer + * sizes of 0xd bytes on reads and 0x5 bytes on writes. I do not know + * whether this is just an OF limit due to some temporary buffer size + * or if this is an SMU imposed limit. This driver has the same limitation + * for now as I use a 0x10 bytes temporary buffer as well + * + * Once that is completed, a response is expected from the SMU. This is + * obtained via a command of type 0x9a with a length of 1 byte containing + * 0 as the data byte. OF also fills the rest of the data buffer with 0xff's + * though I can't tell yet if this is actually necessary. Once this command + * is complete, at this point, all I can tell is what OF does. OF tests + * byte 0 of the reply: + * - on read, 0xfe or 0xfc : bus is busy, wait (see below) or nak ? + * - on read, 0x00 or 0x01 : reply is in buffer (after the byte 0) + * - on write, < 0 -> failure (immediate exit) + * - else, OF just exists (without error, weird) + * + * So on read, there is this wait-for-busy thing when getting a 0xfc or + * 0xfe result. OF does a loop of up to 64 retries, waiting 20ms and + * doing the above again until either the retries expire or the result + * is no longer 0xfe or 0xfc + * + * The Darwin I2C driver is less subtle though. On any non-success status + * from the response command, it waits 5ms and tries again up to 20 times, + * it doesn't differentiate between fatal errors or "busy" status. + * + * This driver provides an asynchronous paramblock based i2c command + * interface to be used either directly by low level code or by a higher + * level driver interfacing to the linux i2c layer. The current + * implementation of this relies on working timers & timer interrupts + * though, so be careful of calling context for now. This may be "fixed" + * in the future by adding a polling facility. + */ +#define SMU_CMD_I2C_COMMAND 0x9a + /* transfer types */ +#define SMU_I2C_TRANSFER_SIMPLE 0x00 +#define SMU_I2C_TRANSFER_STDSUB 0x01 +#define SMU_I2C_TRANSFER_COMBINED 0x02 + +/* + * Power supply control + * + * The "sub" command is an ASCII string in the data, the + * data length is that of the string. + * + * The VSLEW command can be used to get or set the voltage slewing. + * - length 5 (only "VSLEW") : it returns "DONE" and 3 bytes of + * reply at data offset 6, 7 and 8. + * - length 8 ("VSLEWxyz") has 3 additional bytes appended, and is + * used to set the voltage slewing point. The SMU replies with "DONE" + * I yet have to figure out their exact meaning of those 3 bytes in + * both cases. They seem to be: + * x = processor mask + * y = op. point index + * z = processor freq. step index + * I haven't yet deciphered result codes + * + */ +#define SMU_CMD_POWER_COMMAND 0xaa +#define SMU_CMD_POWER_RESTART "RESTART" +#define SMU_CMD_POWER_SHUTDOWN "SHUTDOWN" +#define SMU_CMD_POWER_VOLTAGE_SLEW "VSLEW" + +/* + * Read ADC sensors + * + * This command takes one byte of parameter: the sensor ID (or "reg" + * value in the device-tree) and returns a 16 bits value + */ +#define SMU_CMD_READ_ADC 0xd8 + + +/* Misc commands + * + * This command seem to be a grab bag of various things + * + * Parameters: + * 1: subcommand + */ +#define SMU_CMD_MISC_df_COMMAND 0xdf + +/* + * Sets "system ready" status + * + * I did not yet understand how it exactly works or what it does. + * + * Guessing from OF code, 0x02 activates the display backlight. Apple uses/used + * the same codebase for all OF versions. On PowerBooks, this command would + * enable the backlight. For the G5s, it only activates the front LED. However, + * don't take this for granted. + * + * Parameters: + * 2: status [0x00, 0x01 or 0x02] + */ +#define SMU_CMD_MISC_df_SET_DISPLAY_LIT 0x02 + +/* + * Sets mode of power switch. + * + * What this actually does is not yet known. Maybe it enables some interrupt. + * + * Parameters: + * 2: enable power switch? [0x00 or 0x01] + * 3 (optional): enable nmi? [0x00 or 0x01] + * + * Returns: + * If parameter 2 is 0x00 and parameter 3 is not specified, returns whether + * NMI is enabled. Otherwise unknown. + */ +#define SMU_CMD_MISC_df_NMI_OPTION 0x04 + +/* Sets LED dimm offset. + * + * The front LED dimms itself during sleep. Its brightness (or, well, the PWM + * frequency) depends on current time. Therefore, the SMU needs to know the + * timezone. + * + * Parameters: + * 2-8: unknown (BCD coding) + */ +#define SMU_CMD_MISC_df_DIMM_OFFSET 0x99 + + +/* + * Version info commands + * + * Parameters: + * 1 (optional): Specifies version part to retrieve + * + * Returns: + * Version value + */ +#define SMU_CMD_VERSION_COMMAND 0xea +#define SMU_VERSION_RUNNING 0x00 +#define SMU_VERSION_BASE 0x01 +#define SMU_VERSION_UPDATE 0x02 + + +/* + * Switches + * + * These are switches whose status seems to be known to the SMU. + * + * Parameters: + * none + * + * Result: + * Switch bits (ORed, see below) + */ +#define SMU_CMD_SWITCHES 0xdc + +/* Switches bits */ +#define SMU_SWITCH_CASE_CLOSED 0x01 +#define SMU_SWITCH_AC_POWER 0x04 +#define SMU_SWITCH_POWER_SWITCH 0x08 + + +/* + * Misc commands + * + * This command seem to be a grab bag of various things + * + * SMU_CMD_MISC_ee_GET_DATABLOCK_REC is used, among others, to + * transfer blocks of data from the SMU. So far, I've decrypted it's + * usage to retrieve partition data. In order to do that, you have to + * break your transfer in "chunks" since that command cannot transfer + * more than a chunk at a time. The chunk size used by OF is 0xe bytes, + * but it seems that the darwin driver will let you do 0x1e bytes if + * your "PMU" version is >= 0x30. You can get the "PMU" version apparently + * either in the last 16 bits of property "smu-version-pmu" or as the 16 + * bytes at offset 1 of "smu-version-info" + * + * For each chunk, the command takes 7 bytes of arguments: + * byte 0: subcommand code (0x02) + * byte 1: 0x04 (always, I don't know what it means, maybe the address + * space to use or some other nicety. It's hard coded in OF) + * byte 2..5: SMU address of the chunk (big endian 32 bits) + * byte 6: size to transfer (up to max chunk size) + * + * The data is returned directly + */ +#define SMU_CMD_MISC_ee_COMMAND 0xee +#define SMU_CMD_MISC_ee_GET_DATABLOCK_REC 0x02 + +/* Retrieves currently used watts. + * + * Parameters: + * 1: 0x03 (Meaning unknown) + */ +#define SMU_CMD_MISC_ee_GET_WATTS 0x03 + +#define SMU_CMD_MISC_ee_LEDS_CTRL 0x04 /* i: 00 (00,01) [00] */ +#define SMU_CMD_MISC_ee_GET_DATA 0x05 /* i: 00 , o: ?? */ + + +/* + * Power related commands + * + * Parameters: + * 1: subcommand + */ +#define SMU_CMD_POWER_EVENTS_COMMAND 0x8f + +/* SMU_POWER_EVENTS subcommands */ +enum { + SMU_PWR_GET_POWERUP_EVENTS = 0x00, + SMU_PWR_SET_POWERUP_EVENTS = 0x01, + SMU_PWR_CLR_POWERUP_EVENTS = 0x02, + SMU_PWR_GET_WAKEUP_EVENTS = 0x03, + SMU_PWR_SET_WAKEUP_EVENTS = 0x04, + SMU_PWR_CLR_WAKEUP_EVENTS = 0x05, + + /* + * Get last shutdown cause + * + * Returns: + * 1 byte (signed char): Last shutdown cause. Exact meaning unknown. + */ + SMU_PWR_LAST_SHUTDOWN_CAUSE = 0x07, + + /* + * Sets or gets server ID. Meaning or use is unknown. + * + * Parameters: + * 2 (optional): Set server ID (1 byte) + * + * Returns: + * 1 byte (server ID?) + */ + SMU_PWR_SERVER_ID = 0x08, +}; + +/* Power events wakeup bits */ +enum { + SMU_PWR_WAKEUP_KEY = 0x01, /* Wake on key press */ + SMU_PWR_WAKEUP_AC_INSERT = 0x02, /* Wake on AC adapter plug */ + SMU_PWR_WAKEUP_AC_CHANGE = 0x04, + SMU_PWR_WAKEUP_LID_OPEN = 0x08, + SMU_PWR_WAKEUP_RING = 0x10, +}; + + +/* + * - Kernel side interface - + */ + +#ifdef __KERNEL__ + +/* + * Asynchronous SMU commands + * + * Fill up this structure and submit it via smu_queue_command(), + * and get notified by the optional done() callback, or because + * status becomes != 1 + */ + +struct smu_cmd; + +struct smu_cmd +{ + /* public */ + u8 cmd; /* command */ + int data_len; /* data len */ + int reply_len; /* reply len */ + void *data_buf; /* data buffer */ + void *reply_buf; /* reply buffer */ + int status; /* command status */ + void (*done)(struct smu_cmd *cmd, void *misc); + void *misc; + + /* private */ + struct list_head link; +}; + +/* + * Queues an SMU command, all fields have to be initialized + */ +extern int smu_queue_cmd(struct smu_cmd *cmd); + +/* + * Simple command wrapper. This structure embeds a small buffer + * to ease sending simple SMU commands from the stack + */ +struct smu_simple_cmd +{ + struct smu_cmd cmd; + u8 buffer[16]; +}; + +/* + * Queues a simple command. All fields will be initialized by that + * function + */ +extern int smu_queue_simple(struct smu_simple_cmd *scmd, u8 command, + unsigned int data_len, + void (*done)(struct smu_cmd *cmd, void *misc), + void *misc, + ...); + +/* + * Completion helper. Pass it to smu_queue_simple or as 'done' + * member to smu_queue_cmd, it will call complete() on the struct + * completion passed in the "misc" argument + */ +extern void smu_done_complete(struct smu_cmd *cmd, void *misc); + +/* + * Synchronous helpers. Will spin-wait for completion of a command + */ +extern void smu_spinwait_cmd(struct smu_cmd *cmd); + +static inline void smu_spinwait_simple(struct smu_simple_cmd *scmd) +{ + smu_spinwait_cmd(&scmd->cmd); +} + +/* + * Poll routine to call if blocked with irqs off + */ +extern void smu_poll(void); + + +/* + * Init routine, presence check.... + */ +extern int smu_init(void); +extern int smu_present(void); +struct platform_device; +extern struct platform_device *smu_get_ofdev(void); + + +/* + * Common command wrappers + */ +extern void smu_shutdown(void); +extern void smu_restart(void); +struct rtc_time; +extern int smu_get_rtc_time(struct rtc_time *time, int spinwait); +extern int smu_set_rtc_time(struct rtc_time *time, int spinwait); + +/* + * Kernel asynchronous i2c interface + */ + +#define SMU_I2C_READ_MAX 0x1d +#define SMU_I2C_WRITE_MAX 0x15 + +/* SMU i2c header, exactly matches i2c header on wire */ +struct smu_i2c_param +{ + u8 bus; /* SMU bus ID (from device tree) */ + u8 type; /* i2c transfer type */ + u8 devaddr; /* device address (includes direction) */ + u8 sublen; /* subaddress length */ + u8 subaddr[3]; /* subaddress */ + u8 caddr; /* combined address, filled by SMU driver */ + u8 datalen; /* length of transfer */ + u8 data[SMU_I2C_READ_MAX]; /* data */ +}; + +struct smu_i2c_cmd +{ + /* public */ + struct smu_i2c_param info; + void (*done)(struct smu_i2c_cmd *cmd, void *misc); + void *misc; + int status; /* 1 = pending, 0 = ok, <0 = fail */ + + /* private */ + struct smu_cmd scmd; + int read; + int stage; + int retries; + u8 pdata[32]; + struct list_head link; +}; + +/* + * Call this to queue an i2c command to the SMU. You must fill info, + * including info.data for a write, done and misc. + * For now, no polling interface is provided so you have to use completion + * callback. + */ +extern int smu_queue_i2c(struct smu_i2c_cmd *cmd); + + +#endif /* __KERNEL__ */ + + +/* + * - SMU "sdb" partitions informations - + */ + + +/* + * Partition header format + */ +struct smu_sdbp_header { + __u8 id; + __u8 len; + __u8 version; + __u8 flags; +}; + + + /* + * demangle 16 and 32 bits integer in some SMU partitions + * (currently, afaik, this concerns only the FVT partition + * (0x12) + */ +#define SMU_U16_MIX(x) le16_to_cpu(x) +#define SMU_U32_MIX(x) ((((x) & 0xff00ff00u) >> 8)|(((x) & 0x00ff00ffu) << 8)) + + +/* This is the definition of the SMU sdb-partition-0x12 table (called + * CPU F/V/T operating points in Darwin). The definition for all those + * SMU tables should be moved to some separate file + */ +#define SMU_SDB_FVT_ID 0x12 + +struct smu_sdbp_fvt { + __u32 sysclk; /* Base SysClk frequency in Hz for + * this operating point. Value need to + * be unmixed with SMU_U32_MIX() + */ + __u8 pad; + __u8 maxtemp; /* Max temp. supported by this + * operating point + */ + + __u16 volts[3]; /* CPU core voltage for the 3 + * PowerTune modes, a mode with + * 0V = not supported. Value need + * to be unmixed with SMU_U16_MIX() + */ +}; + +/* This partition contains voltage & current sensor calibration + * informations + */ +#define SMU_SDB_CPUVCP_ID 0x21 + +struct smu_sdbp_cpuvcp { + __u16 volt_scale; /* u4.12 fixed point */ + __s16 volt_offset; /* s4.12 fixed point */ + __u16 curr_scale; /* u4.12 fixed point */ + __s16 curr_offset; /* s4.12 fixed point */ + __s32 power_quads[3]; /* s4.28 fixed point */ +}; + +/* This partition contains CPU thermal diode calibration + */ +#define SMU_SDB_CPUDIODE_ID 0x18 + +struct smu_sdbp_cpudiode { + __u16 m_value; /* u1.15 fixed point */ + __s16 b_value; /* s10.6 fixed point */ + +}; + +/* This partition contains Slots power calibration + */ +#define SMU_SDB_SLOTSPOW_ID 0x78 + +struct smu_sdbp_slotspow { + __u16 pow_scale; /* u4.12 fixed point */ + __s16 pow_offset; /* s4.12 fixed point */ +}; + +/* This partition contains machine specific version information about + * the sensor/control layout + */ +#define SMU_SDB_SENSORTREE_ID 0x25 + +struct smu_sdbp_sensortree { + __u8 model_id; + __u8 unknown[3]; +}; + +/* This partition contains CPU thermal control PID informations. So far + * only single CPU machines have been seen with an SMU, so we assume this + * carries only informations for those + */ +#define SMU_SDB_CPUPIDDATA_ID 0x17 + +struct smu_sdbp_cpupiddata { + __u8 unknown1; + __u8 target_temp_delta; + __u8 unknown2; + __u8 history_len; + __s16 power_adj; + __u16 max_power; + __s32 gp,gr,gd; +}; + + +/* Other partitions without known structures */ +#define SMU_SDB_DEBUG_SWITCHES_ID 0x05 + +#ifdef __KERNEL__ +/* + * This returns the pointer to an SMU "sdb" partition data or NULL + * if not found. The data format is described below + */ +extern const struct smu_sdbp_header *smu_get_sdb_partition(int id, + unsigned int *size); + +/* Get "sdb" partition data from an SMU satellite */ +extern struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, + int id, unsigned int *size); + + +#endif /* __KERNEL__ */ + + +/* + * - Userland interface - + */ + +/* + * A given instance of the device can be configured for 2 different + * things at the moment: + * + * - sending SMU commands (default at open() time) + * - receiving SMU events (not yet implemented) + * + * Commands are written with write() of a command block. They can be + * "driver" commands (for example to switch to event reception mode) + * or real SMU commands. They are made of a header followed by command + * data if any. + * + * For SMU commands (not for driver commands), you can then read() back + * a reply. The reader will be blocked or not depending on how the device + * file is opened. poll() isn't implemented yet. The reply will consist + * of a header as well, followed by the reply data if any. You should + * always provide a buffer large enough for the maximum reply data, I + * recommand one page. + * + * It is illegal to send SMU commands through a file descriptor configured + * for events reception + * + */ +struct smu_user_cmd_hdr +{ + __u32 cmdtype; +#define SMU_CMDTYPE_SMU 0 /* SMU command */ +#define SMU_CMDTYPE_WANTS_EVENTS 1 /* switch fd to events mode */ +#define SMU_CMDTYPE_GET_PARTITION 2 /* retrieve an sdb partition */ + + __u8 cmd; /* SMU command byte */ + __u8 pad[3]; /* padding */ + __u32 data_len; /* Length of data following */ +}; + +struct smu_user_reply_hdr +{ + __u32 status; /* Command status */ + __u32 reply_len; /* Length of data follwing */ +}; + +#endif /* _SMU_H */ diff --git a/arch/powerpc/include/asm/sparsemem.h b/arch/powerpc/include/asm/sparsemem.h new file mode 100644 index 000000000..d07286684 --- /dev/null +++ b/arch/powerpc/include/asm/sparsemem.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_SPARSEMEM_H +#define _ASM_POWERPC_SPARSEMEM_H 1 +#ifdef __KERNEL__ + +#ifdef CONFIG_SPARSEMEM +/* + * SECTION_SIZE_BITS 2^N: how big each section will be + * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space + */ +#define SECTION_SIZE_BITS 24 + +#endif /* CONFIG_SPARSEMEM */ + +#ifdef CONFIG_MEMORY_HOTPLUG +extern int remove_section_mapping(unsigned long start, unsigned long end); +extern int memory_add_physaddr_to_nid(u64 start); +#define memory_add_physaddr_to_nid memory_add_physaddr_to_nid + +#ifdef CONFIG_NUMA +extern int hot_add_scn_to_nid(unsigned long scn_addr); +#else +static inline int hot_add_scn_to_nid(unsigned long scn_addr) +{ + return 0; +} +#endif /* CONFIG_NUMA */ +#endif /* CONFIG_MEMORY_HOTPLUG */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_SPARSEMEM_H */ diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h new file mode 100644 index 000000000..6ec722828 --- /dev/null +++ b/arch/powerpc/include/asm/spinlock.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef __ASM_SPINLOCK_H +#define __ASM_SPINLOCK_H +#ifdef __KERNEL__ + +#ifdef CONFIG_PPC_QUEUED_SPINLOCKS +#include <asm/qspinlock.h> +#include <asm/qrwlock.h> +#else +#include <asm/simple_spinlock.h> +#endif + +#ifndef CONFIG_PARAVIRT_SPINLOCKS +static inline void pv_spinlocks_init(void) { } +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SPINLOCK_H */ diff --git a/arch/powerpc/include/asm/spinlock_types.h b/arch/powerpc/include/asm/spinlock_types.h new file mode 100644 index 000000000..c5d742f18 --- /dev/null +++ b/arch/powerpc/include/asm/spinlock_types.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_SPINLOCK_TYPES_H +#define _ASM_POWERPC_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +#ifdef CONFIG_PPC_QUEUED_SPINLOCKS +#include <asm-generic/qspinlock_types.h> +#include <asm-generic/qrwlock_types.h> +#else +#include <asm/simple_spinlock_types.h> +#endif + +#endif diff --git a/arch/powerpc/include/asm/spu.h b/arch/powerpc/include/asm/spu.h new file mode 100644 index 000000000..9666491bc --- /dev/null +++ b/arch/powerpc/include/asm/spu.h @@ -0,0 +1,712 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * SPU core / file system interface and HW structures + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Arnd Bergmann <arndb@de.ibm.com> + */ + +#ifndef _SPU_H +#define _SPU_H +#ifdef __KERNEL__ + +#include <linux/workqueue.h> +#include <linux/device.h> +#include <linux/mutex.h> +#include <asm/reg.h> +#include <asm/copro.h> + +#define LS_SIZE (256 * 1024) +#define LS_ADDR_MASK (LS_SIZE - 1) + +#define MFC_PUT_CMD 0x20 +#define MFC_PUTS_CMD 0x28 +#define MFC_PUTR_CMD 0x30 +#define MFC_PUTF_CMD 0x22 +#define MFC_PUTB_CMD 0x21 +#define MFC_PUTFS_CMD 0x2A +#define MFC_PUTBS_CMD 0x29 +#define MFC_PUTRF_CMD 0x32 +#define MFC_PUTRB_CMD 0x31 +#define MFC_PUTL_CMD 0x24 +#define MFC_PUTRL_CMD 0x34 +#define MFC_PUTLF_CMD 0x26 +#define MFC_PUTLB_CMD 0x25 +#define MFC_PUTRLF_CMD 0x36 +#define MFC_PUTRLB_CMD 0x35 + +#define MFC_GET_CMD 0x40 +#define MFC_GETS_CMD 0x48 +#define MFC_GETF_CMD 0x42 +#define MFC_GETB_CMD 0x41 +#define MFC_GETFS_CMD 0x4A +#define MFC_GETBS_CMD 0x49 +#define MFC_GETL_CMD 0x44 +#define MFC_GETLF_CMD 0x46 +#define MFC_GETLB_CMD 0x45 + +#define MFC_SDCRT_CMD 0x80 +#define MFC_SDCRTST_CMD 0x81 +#define MFC_SDCRZ_CMD 0x89 +#define MFC_SDCRS_CMD 0x8D +#define MFC_SDCRF_CMD 0x8F + +#define MFC_GETLLAR_CMD 0xD0 +#define MFC_PUTLLC_CMD 0xB4 +#define MFC_PUTLLUC_CMD 0xB0 +#define MFC_PUTQLLUC_CMD 0xB8 +#define MFC_SNDSIG_CMD 0xA0 +#define MFC_SNDSIGB_CMD 0xA1 +#define MFC_SNDSIGF_CMD 0xA2 +#define MFC_BARRIER_CMD 0xC0 +#define MFC_EIEIO_CMD 0xC8 +#define MFC_SYNC_CMD 0xCC + +#define MFC_MIN_DMA_SIZE_SHIFT 4 /* 16 bytes */ +#define MFC_MAX_DMA_SIZE_SHIFT 14 /* 16384 bytes */ +#define MFC_MIN_DMA_SIZE (1 << MFC_MIN_DMA_SIZE_SHIFT) +#define MFC_MAX_DMA_SIZE (1 << MFC_MAX_DMA_SIZE_SHIFT) +#define MFC_MIN_DMA_SIZE_MASK (MFC_MIN_DMA_SIZE - 1) +#define MFC_MAX_DMA_SIZE_MASK (MFC_MAX_DMA_SIZE - 1) +#define MFC_MIN_DMA_LIST_SIZE 0x0008 /* 8 bytes */ +#define MFC_MAX_DMA_LIST_SIZE 0x4000 /* 16K bytes */ + +#define MFC_TAGID_TO_TAGMASK(tag_id) (1 << (tag_id & 0x1F)) + +/* Events for Channels 0-2 */ +#define MFC_DMA_TAG_STATUS_UPDATE_EVENT 0x00000001 +#define MFC_DMA_TAG_CMD_STALL_NOTIFY_EVENT 0x00000002 +#define MFC_DMA_QUEUE_AVAILABLE_EVENT 0x00000008 +#define MFC_SPU_MAILBOX_WRITTEN_EVENT 0x00000010 +#define MFC_DECREMENTER_EVENT 0x00000020 +#define MFC_PU_INT_MAILBOX_AVAILABLE_EVENT 0x00000040 +#define MFC_PU_MAILBOX_AVAILABLE_EVENT 0x00000080 +#define MFC_SIGNAL_2_EVENT 0x00000100 +#define MFC_SIGNAL_1_EVENT 0x00000200 +#define MFC_LLR_LOST_EVENT 0x00000400 +#define MFC_PRIV_ATTN_EVENT 0x00000800 +#define MFC_MULTI_SRC_EVENT 0x00001000 + +/* Flag indicating progress during context switch. */ +#define SPU_CONTEXT_SWITCH_PENDING 0UL +#define SPU_CONTEXT_FAULT_PENDING 1UL + +struct spu_context; +struct spu_runqueue; +struct spu_lscsa; +struct device_node; + +enum spu_utilization_state { + SPU_UTIL_USER, + SPU_UTIL_SYSTEM, + SPU_UTIL_IOWAIT, + SPU_UTIL_IDLE_LOADED, + SPU_UTIL_MAX +}; + +struct spu { + const char *name; + unsigned long local_store_phys; + u8 *local_store; + unsigned long problem_phys; + struct spu_problem __iomem *problem; + struct spu_priv2 __iomem *priv2; + struct list_head cbe_list; + struct list_head full_list; + enum { SPU_FREE, SPU_USED } alloc_state; + int number; + unsigned int irqs[3]; + u32 node; + unsigned long flags; + u64 class_0_pending; + u64 class_0_dar; + u64 class_1_dar; + u64 class_1_dsisr; + size_t ls_size; + unsigned int slb_replace; + struct mm_struct *mm; + struct spu_context *ctx; + struct spu_runqueue *rq; + unsigned long long timestamp; + pid_t pid; + pid_t tgid; + spinlock_t register_lock; + + void (* wbox_callback)(struct spu *spu); + void (* ibox_callback)(struct spu *spu); + void (* stop_callback)(struct spu *spu, int irq); + void (* mfc_callback)(struct spu *spu); + + char irq_c0[8]; + char irq_c1[8]; + char irq_c2[8]; + + u64 spe_id; + + void* pdata; /* platform private data */ + + /* of based platforms only */ + struct device_node *devnode; + + /* native only */ + struct spu_priv1 __iomem *priv1; + + /* beat only */ + u64 shadow_int_mask_RW[3]; + + struct device dev; + + int has_mem_affinity; + struct list_head aff_list; + + struct { + /* protected by interrupt reentrancy */ + enum spu_utilization_state util_state; + unsigned long long tstamp; + unsigned long long times[SPU_UTIL_MAX]; + unsigned long long vol_ctx_switch; + unsigned long long invol_ctx_switch; + unsigned long long min_flt; + unsigned long long maj_flt; + unsigned long long hash_flt; + unsigned long long slb_flt; + unsigned long long class2_intr; + unsigned long long libassist; + } stats; +}; + +struct cbe_spu_info { + struct mutex list_mutex; + struct list_head spus; + int n_spus; + int nr_active; + atomic_t busy_spus; + atomic_t reserved_spus; +}; + +extern struct cbe_spu_info cbe_spu_info[]; + +void spu_init_channels(struct spu *spu); +void spu_irq_setaffinity(struct spu *spu, int cpu); + +void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa, + void *code, int code_size); + +extern void spu_invalidate_slbs(struct spu *spu); +extern void spu_associate_mm(struct spu *spu, struct mm_struct *mm); +int spu_64k_pages_available(void); + +/* Calls from the memory management to the SPU */ +struct mm_struct; +extern void spu_flush_all_slbs(struct mm_struct *mm); + +/* This interface allows a profiler (e.g., OProfile) to store a ref + * to spu context information that it creates. This caching technique + * avoids the need to recreate this information after a save/restore operation. + * + * Assumes the caller has already incremented the ref count to + * profile_info; then spu_context_destroy must call kref_put + * on prof_info_kref. + */ +void spu_set_profile_private_kref(struct spu_context *ctx, + struct kref *prof_info_kref, + void ( * prof_info_release) (struct kref *kref)); + +void *spu_get_profile_private_kref(struct spu_context *ctx); + +/* system callbacks from the SPU */ +struct spu_syscall_block { + u64 nr_ret; + u64 parm[6]; +}; +extern long spu_sys_callback(struct spu_syscall_block *s); + +/* syscalls implemented in spufs */ +struct file; +struct coredump_params; +struct spufs_calls { + long (*create_thread)(const char __user *name, + unsigned int flags, umode_t mode, + struct file *neighbor); + long (*spu_run)(struct file *filp, __u32 __user *unpc, + __u32 __user *ustatus); + int (*coredump_extra_notes_size)(void); + int (*coredump_extra_notes_write)(struct coredump_params *cprm); + void (*notify_spus_active)(void); + struct module *owner; +}; + +/* return status from spu_run, same as in libspe */ +#define SPE_EVENT_DMA_ALIGNMENT 0x0008 /*A DMA alignment error */ +#define SPE_EVENT_SPE_ERROR 0x0010 /*An illegal instruction error*/ +#define SPE_EVENT_SPE_DATA_SEGMENT 0x0020 /*A DMA segmentation error */ +#define SPE_EVENT_SPE_DATA_STORAGE 0x0040 /*A DMA storage error */ +#define SPE_EVENT_INVALID_DMA 0x0800 /* Invalid MFC DMA */ + +/* + * Flags for sys_spu_create. + */ +#define SPU_CREATE_EVENTS_ENABLED 0x0001 +#define SPU_CREATE_GANG 0x0002 +#define SPU_CREATE_NOSCHED 0x0004 +#define SPU_CREATE_ISOLATE 0x0008 +#define SPU_CREATE_AFFINITY_SPU 0x0010 +#define SPU_CREATE_AFFINITY_MEM 0x0020 + +#define SPU_CREATE_FLAG_ALL 0x003f /* mask of all valid flags */ + + +int register_spu_syscalls(struct spufs_calls *calls); +void unregister_spu_syscalls(struct spufs_calls *calls); + +int spu_add_dev_attr(struct device_attribute *attr); +void spu_remove_dev_attr(struct device_attribute *attr); + +int spu_add_dev_attr_group(struct attribute_group *attrs); +void spu_remove_dev_attr_group(struct attribute_group *attrs); + +/* + * Notifier blocks: + * + * oprofile can get notified when a context switch is performed + * on an spe. The notifer function that gets called is passed + * a pointer to the SPU structure as well as the object-id that + * identifies the binary running on that SPU now. + * + * For a context save, the object-id that is passed is zero, + * identifying that the kernel will run from that moment on. + * + * For a context restore, the object-id is the value written + * to object-id spufs file from user space and the notifer + * function can assume that spu->ctx is valid. + */ +struct notifier_block; +int spu_switch_event_register(struct notifier_block * n); +int spu_switch_event_unregister(struct notifier_block * n); + +extern void notify_spus_active(void); +extern void do_notify_spus_active(void); + +/* + * This defines the Local Store, Problem Area and Privilege Area of an SPU. + */ + +union mfc_tag_size_class_cmd { + struct { + u16 mfc_size; + u16 mfc_tag; + u8 pad; + u8 mfc_rclassid; + u16 mfc_cmd; + } u; + struct { + u32 mfc_size_tag32; + u32 mfc_class_cmd32; + } by32; + u64 all64; +}; + +struct mfc_cq_sr { + u64 mfc_cq_data0_RW; + u64 mfc_cq_data1_RW; + u64 mfc_cq_data2_RW; + u64 mfc_cq_data3_RW; +}; + +struct spu_problem { +#define MS_SYNC_PENDING 1L + u64 spc_mssync_RW; /* 0x0000 */ + u8 pad_0x0008_0x3000[0x3000 - 0x0008]; + + /* DMA Area */ + u8 pad_0x3000_0x3004[0x4]; /* 0x3000 */ + u32 mfc_lsa_W; /* 0x3004 */ + u64 mfc_ea_W; /* 0x3008 */ + union mfc_tag_size_class_cmd mfc_union_W; /* 0x3010 */ + u8 pad_0x3018_0x3104[0xec]; /* 0x3018 */ + u32 dma_qstatus_R; /* 0x3104 */ + u8 pad_0x3108_0x3204[0xfc]; /* 0x3108 */ + u32 dma_querytype_RW; /* 0x3204 */ + u8 pad_0x3208_0x321c[0x14]; /* 0x3208 */ + u32 dma_querymask_RW; /* 0x321c */ + u8 pad_0x3220_0x322c[0xc]; /* 0x3220 */ + u32 dma_tagstatus_R; /* 0x322c */ +#define DMA_TAGSTATUS_INTR_ANY 1u +#define DMA_TAGSTATUS_INTR_ALL 2u + u8 pad_0x3230_0x4000[0x4000 - 0x3230]; /* 0x3230 */ + + /* SPU Control Area */ + u8 pad_0x4000_0x4004[0x4]; /* 0x4000 */ + u32 pu_mb_R; /* 0x4004 */ + u8 pad_0x4008_0x400c[0x4]; /* 0x4008 */ + u32 spu_mb_W; /* 0x400c */ + u8 pad_0x4010_0x4014[0x4]; /* 0x4010 */ + u32 mb_stat_R; /* 0x4014 */ + u8 pad_0x4018_0x401c[0x4]; /* 0x4018 */ + u32 spu_runcntl_RW; /* 0x401c */ +#define SPU_RUNCNTL_STOP 0L +#define SPU_RUNCNTL_RUNNABLE 1L +#define SPU_RUNCNTL_ISOLATE 2L + u8 pad_0x4020_0x4024[0x4]; /* 0x4020 */ + u32 spu_status_R; /* 0x4024 */ +#define SPU_STOP_STATUS_SHIFT 16 +#define SPU_STATUS_STOPPED 0x0 +#define SPU_STATUS_RUNNING 0x1 +#define SPU_STATUS_STOPPED_BY_STOP 0x2 +#define SPU_STATUS_STOPPED_BY_HALT 0x4 +#define SPU_STATUS_WAITING_FOR_CHANNEL 0x8 +#define SPU_STATUS_SINGLE_STEP 0x10 +#define SPU_STATUS_INVALID_INSTR 0x20 +#define SPU_STATUS_INVALID_CH 0x40 +#define SPU_STATUS_ISOLATED_STATE 0x80 +#define SPU_STATUS_ISOLATED_LOAD_STATUS 0x200 +#define SPU_STATUS_ISOLATED_EXIT_STATUS 0x400 + u8 pad_0x4028_0x402c[0x4]; /* 0x4028 */ + u32 spu_spe_R; /* 0x402c */ + u8 pad_0x4030_0x4034[0x4]; /* 0x4030 */ + u32 spu_npc_RW; /* 0x4034 */ + u8 pad_0x4038_0x14000[0x14000 - 0x4038]; /* 0x4038 */ + + /* Signal Notification Area */ + u8 pad_0x14000_0x1400c[0xc]; /* 0x14000 */ + u32 signal_notify1; /* 0x1400c */ + u8 pad_0x14010_0x1c00c[0x7ffc]; /* 0x14010 */ + u32 signal_notify2; /* 0x1c00c */ +} __attribute__ ((aligned(0x20000))); + +/* SPU Privilege 2 State Area */ +struct spu_priv2 { + /* MFC Registers */ + u8 pad_0x0000_0x1100[0x1100 - 0x0000]; /* 0x0000 */ + + /* SLB Management Registers */ + u8 pad_0x1100_0x1108[0x8]; /* 0x1100 */ + u64 slb_index_W; /* 0x1108 */ +#define SLB_INDEX_MASK 0x7L + u64 slb_esid_RW; /* 0x1110 */ + u64 slb_vsid_RW; /* 0x1118 */ +#define SLB_VSID_SUPERVISOR_STATE (0x1ull << 11) +#define SLB_VSID_SUPERVISOR_STATE_MASK (0x1ull << 11) +#define SLB_VSID_PROBLEM_STATE (0x1ull << 10) +#define SLB_VSID_PROBLEM_STATE_MASK (0x1ull << 10) +#define SLB_VSID_EXECUTE_SEGMENT (0x1ull << 9) +#define SLB_VSID_NO_EXECUTE_SEGMENT (0x1ull << 9) +#define SLB_VSID_EXECUTE_SEGMENT_MASK (0x1ull << 9) +#define SLB_VSID_4K_PAGE (0x0 << 8) +#define SLB_VSID_LARGE_PAGE (0x1ull << 8) +#define SLB_VSID_PAGE_SIZE_MASK (0x1ull << 8) +#define SLB_VSID_CLASS_MASK (0x1ull << 7) +#define SLB_VSID_VIRTUAL_PAGE_SIZE_MASK (0x1ull << 6) + u64 slb_invalidate_entry_W; /* 0x1120 */ + u64 slb_invalidate_all_W; /* 0x1128 */ + u8 pad_0x1130_0x2000[0x2000 - 0x1130]; /* 0x1130 */ + + /* Context Save / Restore Area */ + struct mfc_cq_sr spuq[16]; /* 0x2000 */ + struct mfc_cq_sr puq[8]; /* 0x2200 */ + u8 pad_0x2300_0x3000[0x3000 - 0x2300]; /* 0x2300 */ + + /* MFC Control */ + u64 mfc_control_RW; /* 0x3000 */ +#define MFC_CNTL_RESUME_DMA_QUEUE (0ull << 0) +#define MFC_CNTL_SUSPEND_DMA_QUEUE (1ull << 0) +#define MFC_CNTL_SUSPEND_DMA_QUEUE_MASK (1ull << 0) +#define MFC_CNTL_SUSPEND_MASK (1ull << 4) +#define MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION (0ull << 8) +#define MFC_CNTL_SUSPEND_IN_PROGRESS (1ull << 8) +#define MFC_CNTL_SUSPEND_COMPLETE (3ull << 8) +#define MFC_CNTL_SUSPEND_DMA_STATUS_MASK (3ull << 8) +#define MFC_CNTL_DMA_QUEUES_EMPTY (1ull << 14) +#define MFC_CNTL_DMA_QUEUES_EMPTY_MASK (1ull << 14) +#define MFC_CNTL_PURGE_DMA_REQUEST (1ull << 15) +#define MFC_CNTL_PURGE_DMA_IN_PROGRESS (1ull << 24) +#define MFC_CNTL_PURGE_DMA_COMPLETE (3ull << 24) +#define MFC_CNTL_PURGE_DMA_STATUS_MASK (3ull << 24) +#define MFC_CNTL_RESTART_DMA_COMMAND (1ull << 32) +#define MFC_CNTL_DMA_COMMAND_REISSUE_PENDING (1ull << 32) +#define MFC_CNTL_DMA_COMMAND_REISSUE_STATUS_MASK (1ull << 32) +#define MFC_CNTL_MFC_PRIVILEGE_STATE (2ull << 33) +#define MFC_CNTL_MFC_PROBLEM_STATE (3ull << 33) +#define MFC_CNTL_MFC_KEY_PROTECTION_STATE_MASK (3ull << 33) +#define MFC_CNTL_DECREMENTER_HALTED (1ull << 35) +#define MFC_CNTL_DECREMENTER_RUNNING (1ull << 40) +#define MFC_CNTL_DECREMENTER_STATUS_MASK (1ull << 40) + u8 pad_0x3008_0x4000[0x4000 - 0x3008]; /* 0x3008 */ + + /* Interrupt Mailbox */ + u64 puint_mb_R; /* 0x4000 */ + u8 pad_0x4008_0x4040[0x4040 - 0x4008]; /* 0x4008 */ + + /* SPU Control */ + u64 spu_privcntl_RW; /* 0x4040 */ +#define SPU_PRIVCNTL_MODE_NORMAL (0x0ull << 0) +#define SPU_PRIVCNTL_MODE_SINGLE_STEP (0x1ull << 0) +#define SPU_PRIVCNTL_MODE_MASK (0x1ull << 0) +#define SPU_PRIVCNTL_NO_ATTENTION_EVENT (0x0ull << 1) +#define SPU_PRIVCNTL_ATTENTION_EVENT (0x1ull << 1) +#define SPU_PRIVCNTL_ATTENTION_EVENT_MASK (0x1ull << 1) +#define SPU_PRIVCNT_LOAD_REQUEST_NORMAL (0x0ull << 2) +#define SPU_PRIVCNT_LOAD_REQUEST_ENABLE_MASK (0x1ull << 2) + u8 pad_0x4048_0x4058[0x10]; /* 0x4048 */ + u64 spu_lslr_RW; /* 0x4058 */ + u64 spu_chnlcntptr_RW; /* 0x4060 */ + u64 spu_chnlcnt_RW; /* 0x4068 */ + u64 spu_chnldata_RW; /* 0x4070 */ + u64 spu_cfg_RW; /* 0x4078 */ + u8 pad_0x4080_0x5000[0x5000 - 0x4080]; /* 0x4080 */ + + /* PV2_ImplRegs: Implementation-specific privileged-state 2 regs */ + u64 spu_pm_trace_tag_status_RW; /* 0x5000 */ + u64 spu_tag_status_query_RW; /* 0x5008 */ +#define TAG_STATUS_QUERY_CONDITION_BITS (0x3ull << 32) +#define TAG_STATUS_QUERY_MASK_BITS (0xffffffffull) + u64 spu_cmd_buf1_RW; /* 0x5010 */ +#define SPU_COMMAND_BUFFER_1_LSA_BITS (0x7ffffull << 32) +#define SPU_COMMAND_BUFFER_1_EAH_BITS (0xffffffffull) + u64 spu_cmd_buf2_RW; /* 0x5018 */ +#define SPU_COMMAND_BUFFER_2_EAL_BITS ((0xffffffffull) << 32) +#define SPU_COMMAND_BUFFER_2_TS_BITS (0xffffull << 16) +#define SPU_COMMAND_BUFFER_2_TAG_BITS (0x3full) + u64 spu_atomic_status_RW; /* 0x5020 */ +} __attribute__ ((aligned(0x20000))); + +/* SPU Privilege 1 State Area */ +struct spu_priv1 { + /* Control and Configuration Area */ + u64 mfc_sr1_RW; /* 0x000 */ +#define MFC_STATE1_LOCAL_STORAGE_DECODE_MASK 0x01ull +#define MFC_STATE1_BUS_TLBIE_MASK 0x02ull +#define MFC_STATE1_REAL_MODE_OFFSET_ENABLE_MASK 0x04ull +#define MFC_STATE1_PROBLEM_STATE_MASK 0x08ull +#define MFC_STATE1_RELOCATE_MASK 0x10ull +#define MFC_STATE1_MASTER_RUN_CONTROL_MASK 0x20ull +#define MFC_STATE1_TABLE_SEARCH_MASK 0x40ull + u64 mfc_lpid_RW; /* 0x008 */ + u64 spu_idr_RW; /* 0x010 */ + u64 mfc_vr_RO; /* 0x018 */ +#define MFC_VERSION_BITS (0xffff << 16) +#define MFC_REVISION_BITS (0xffff) +#define MFC_GET_VERSION_BITS(vr) (((vr) & MFC_VERSION_BITS) >> 16) +#define MFC_GET_REVISION_BITS(vr) ((vr) & MFC_REVISION_BITS) + u64 spu_vr_RO; /* 0x020 */ +#define SPU_VERSION_BITS (0xffff << 16) +#define SPU_REVISION_BITS (0xffff) +#define SPU_GET_VERSION_BITS(vr) (vr & SPU_VERSION_BITS) >> 16 +#define SPU_GET_REVISION_BITS(vr) (vr & SPU_REVISION_BITS) + u8 pad_0x28_0x100[0x100 - 0x28]; /* 0x28 */ + + /* Interrupt Area */ + u64 int_mask_RW[3]; /* 0x100 */ +#define CLASS0_ENABLE_DMA_ALIGNMENT_INTR 0x1L +#define CLASS0_ENABLE_INVALID_DMA_COMMAND_INTR 0x2L +#define CLASS0_ENABLE_SPU_ERROR_INTR 0x4L +#define CLASS0_ENABLE_MFC_FIR_INTR 0x8L +#define CLASS1_ENABLE_SEGMENT_FAULT_INTR 0x1L +#define CLASS1_ENABLE_STORAGE_FAULT_INTR 0x2L +#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_GET_INTR 0x4L +#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_PUT_INTR 0x8L +#define CLASS2_ENABLE_MAILBOX_INTR 0x1L +#define CLASS2_ENABLE_SPU_STOP_INTR 0x2L +#define CLASS2_ENABLE_SPU_HALT_INTR 0x4L +#define CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR 0x8L +#define CLASS2_ENABLE_MAILBOX_THRESHOLD_INTR 0x10L + u8 pad_0x118_0x140[0x28]; /* 0x118 */ + u64 int_stat_RW[3]; /* 0x140 */ +#define CLASS0_DMA_ALIGNMENT_INTR 0x1L +#define CLASS0_INVALID_DMA_COMMAND_INTR 0x2L +#define CLASS0_SPU_ERROR_INTR 0x4L +#define CLASS0_INTR_MASK 0x7L +#define CLASS1_SEGMENT_FAULT_INTR 0x1L +#define CLASS1_STORAGE_FAULT_INTR 0x2L +#define CLASS1_LS_COMPARE_SUSPEND_ON_GET_INTR 0x4L +#define CLASS1_LS_COMPARE_SUSPEND_ON_PUT_INTR 0x8L +#define CLASS1_INTR_MASK 0xfL +#define CLASS2_MAILBOX_INTR 0x1L +#define CLASS2_SPU_STOP_INTR 0x2L +#define CLASS2_SPU_HALT_INTR 0x4L +#define CLASS2_SPU_DMA_TAG_GROUP_COMPLETE_INTR 0x8L +#define CLASS2_MAILBOX_THRESHOLD_INTR 0x10L +#define CLASS2_INTR_MASK 0x1fL + u8 pad_0x158_0x180[0x28]; /* 0x158 */ + u64 int_route_RW; /* 0x180 */ + + /* Interrupt Routing */ + u8 pad_0x188_0x200[0x200 - 0x188]; /* 0x188 */ + + /* Atomic Unit Control Area */ + u64 mfc_atomic_flush_RW; /* 0x200 */ +#define mfc_atomic_flush_enable 0x1L + u8 pad_0x208_0x280[0x78]; /* 0x208 */ + u64 resource_allocation_groupID_RW; /* 0x280 */ + u64 resource_allocation_enable_RW; /* 0x288 */ + u8 pad_0x290_0x3c8[0x3c8 - 0x290]; /* 0x290 */ + + /* SPU_Cache_ImplRegs: Implementation-dependent cache registers */ + + u64 smf_sbi_signal_sel; /* 0x3c8 */ +#define smf_sbi_mask_lsb 56 +#define smf_sbi_shift (63 - smf_sbi_mask_lsb) +#define smf_sbi_mask (0x301LL << smf_sbi_shift) +#define smf_sbi_bus0_bits (0x001LL << smf_sbi_shift) +#define smf_sbi_bus2_bits (0x100LL << smf_sbi_shift) +#define smf_sbi2_bus0_bits (0x201LL << smf_sbi_shift) +#define smf_sbi2_bus2_bits (0x300LL << smf_sbi_shift) + u64 smf_ato_signal_sel; /* 0x3d0 */ +#define smf_ato_mask_lsb 35 +#define smf_ato_shift (63 - smf_ato_mask_lsb) +#define smf_ato_mask (0x3LL << smf_ato_shift) +#define smf_ato_bus0_bits (0x2LL << smf_ato_shift) +#define smf_ato_bus2_bits (0x1LL << smf_ato_shift) + u8 pad_0x3d8_0x400[0x400 - 0x3d8]; /* 0x3d8 */ + + /* TLB Management Registers */ + u64 mfc_sdr_RW; /* 0x400 */ + u8 pad_0x408_0x500[0xf8]; /* 0x408 */ + u64 tlb_index_hint_RO; /* 0x500 */ + u64 tlb_index_W; /* 0x508 */ + u64 tlb_vpn_RW; /* 0x510 */ + u64 tlb_rpn_RW; /* 0x518 */ + u8 pad_0x520_0x540[0x20]; /* 0x520 */ + u64 tlb_invalidate_entry_W; /* 0x540 */ + u64 tlb_invalidate_all_W; /* 0x548 */ + u8 pad_0x550_0x580[0x580 - 0x550]; /* 0x550 */ + + /* SPU_MMU_ImplRegs: Implementation-dependent MMU registers */ + u64 smm_hid; /* 0x580 */ +#define PAGE_SIZE_MASK 0xf000000000000000ull +#define PAGE_SIZE_16MB_64KB 0x2000000000000000ull + u8 pad_0x588_0x600[0x600 - 0x588]; /* 0x588 */ + + /* MFC Status/Control Area */ + u64 mfc_accr_RW; /* 0x600 */ +#define MFC_ACCR_EA_ACCESS_GET (1 << 0) +#define MFC_ACCR_EA_ACCESS_PUT (1 << 1) +#define MFC_ACCR_LS_ACCESS_GET (1 << 3) +#define MFC_ACCR_LS_ACCESS_PUT (1 << 4) + u8 pad_0x608_0x610[0x8]; /* 0x608 */ + u64 mfc_dsisr_RW; /* 0x610 */ +#define MFC_DSISR_PTE_NOT_FOUND (1 << 30) +#define MFC_DSISR_ACCESS_DENIED (1 << 27) +#define MFC_DSISR_ATOMIC (1 << 26) +#define MFC_DSISR_ACCESS_PUT (1 << 25) +#define MFC_DSISR_ADDR_MATCH (1 << 22) +#define MFC_DSISR_LS (1 << 17) +#define MFC_DSISR_L (1 << 16) +#define MFC_DSISR_ADDRESS_OVERFLOW (1 << 0) + u8 pad_0x618_0x620[0x8]; /* 0x618 */ + u64 mfc_dar_RW; /* 0x620 */ + u8 pad_0x628_0x700[0x700 - 0x628]; /* 0x628 */ + + /* Replacement Management Table (RMT) Area */ + u64 rmt_index_RW; /* 0x700 */ + u8 pad_0x708_0x710[0x8]; /* 0x708 */ + u64 rmt_data1_RW; /* 0x710 */ + u8 pad_0x718_0x800[0x800 - 0x718]; /* 0x718 */ + + /* Control/Configuration Registers */ + u64 mfc_dsir_R; /* 0x800 */ +#define MFC_DSIR_Q (1 << 31) +#define MFC_DSIR_SPU_QUEUE MFC_DSIR_Q + u64 mfc_lsacr_RW; /* 0x808 */ +#define MFC_LSACR_COMPARE_MASK ((~0ull) << 32) +#define MFC_LSACR_COMPARE_ADDR ((~0ull) >> 32) + u64 mfc_lscrr_R; /* 0x810 */ +#define MFC_LSCRR_Q (1 << 31) +#define MFC_LSCRR_SPU_QUEUE MFC_LSCRR_Q +#define MFC_LSCRR_QI_SHIFT 32 +#define MFC_LSCRR_QI_MASK ((~0ull) << MFC_LSCRR_QI_SHIFT) + u8 pad_0x818_0x820[0x8]; /* 0x818 */ + u64 mfc_tclass_id_RW; /* 0x820 */ +#define MFC_TCLASS_ID_ENABLE (1L << 0L) +#define MFC_TCLASS_SLOT2_ENABLE (1L << 5L) +#define MFC_TCLASS_SLOT1_ENABLE (1L << 6L) +#define MFC_TCLASS_SLOT0_ENABLE (1L << 7L) +#define MFC_TCLASS_QUOTA_2_SHIFT 8L +#define MFC_TCLASS_QUOTA_1_SHIFT 16L +#define MFC_TCLASS_QUOTA_0_SHIFT 24L +#define MFC_TCLASS_QUOTA_2_MASK (0x1FL << MFC_TCLASS_QUOTA_2_SHIFT) +#define MFC_TCLASS_QUOTA_1_MASK (0x1FL << MFC_TCLASS_QUOTA_1_SHIFT) +#define MFC_TCLASS_QUOTA_0_MASK (0x1FL << MFC_TCLASS_QUOTA_0_SHIFT) + u8 pad_0x828_0x900[0x900 - 0x828]; /* 0x828 */ + + /* Real Mode Support Registers */ + u64 mfc_rm_boundary; /* 0x900 */ + u8 pad_0x908_0x938[0x30]; /* 0x908 */ + u64 smf_dma_signal_sel; /* 0x938 */ +#define mfc_dma1_mask_lsb 41 +#define mfc_dma1_shift (63 - mfc_dma1_mask_lsb) +#define mfc_dma1_mask (0x3LL << mfc_dma1_shift) +#define mfc_dma1_bits (0x1LL << mfc_dma1_shift) +#define mfc_dma2_mask_lsb 43 +#define mfc_dma2_shift (63 - mfc_dma2_mask_lsb) +#define mfc_dma2_mask (0x3LL << mfc_dma2_shift) +#define mfc_dma2_bits (0x1LL << mfc_dma2_shift) + u8 pad_0x940_0xa38[0xf8]; /* 0x940 */ + u64 smm_signal_sel; /* 0xa38 */ +#define smm_sig_mask_lsb 12 +#define smm_sig_shift (63 - smm_sig_mask_lsb) +#define smm_sig_mask (0x3LL << smm_sig_shift) +#define smm_sig_bus0_bits (0x2LL << smm_sig_shift) +#define smm_sig_bus2_bits (0x1LL << smm_sig_shift) + u8 pad_0xa40_0xc00[0xc00 - 0xa40]; /* 0xa40 */ + + /* DMA Command Error Area */ + u64 mfc_cer_R; /* 0xc00 */ +#define MFC_CER_Q (1 << 31) +#define MFC_CER_SPU_QUEUE MFC_CER_Q + u8 pad_0xc08_0x1000[0x1000 - 0xc08]; /* 0xc08 */ + + /* PV1_ImplRegs: Implementation-dependent privileged-state 1 regs */ + /* DMA Command Error Area */ + u64 spu_ecc_cntl_RW; /* 0x1000 */ +#define SPU_ECC_CNTL_E (1ull << 0ull) +#define SPU_ECC_CNTL_ENABLE SPU_ECC_CNTL_E +#define SPU_ECC_CNTL_DISABLE (~SPU_ECC_CNTL_E & 1L) +#define SPU_ECC_CNTL_S (1ull << 1ull) +#define SPU_ECC_STOP_AFTER_ERROR SPU_ECC_CNTL_S +#define SPU_ECC_CONTINUE_AFTER_ERROR (~SPU_ECC_CNTL_S & 2L) +#define SPU_ECC_CNTL_B (1ull << 2ull) +#define SPU_ECC_BACKGROUND_ENABLE SPU_ECC_CNTL_B +#define SPU_ECC_BACKGROUND_DISABLE (~SPU_ECC_CNTL_B & 4L) +#define SPU_ECC_CNTL_I_SHIFT 3ull +#define SPU_ECC_CNTL_I_MASK (3ull << SPU_ECC_CNTL_I_SHIFT) +#define SPU_ECC_WRITE_ALWAYS (~SPU_ECC_CNTL_I & 12L) +#define SPU_ECC_WRITE_CORRECTABLE (1ull << SPU_ECC_CNTL_I_SHIFT) +#define SPU_ECC_WRITE_UNCORRECTABLE (3ull << SPU_ECC_CNTL_I_SHIFT) +#define SPU_ECC_CNTL_D (1ull << 5ull) +#define SPU_ECC_DETECTION_ENABLE SPU_ECC_CNTL_D +#define SPU_ECC_DETECTION_DISABLE (~SPU_ECC_CNTL_D & 32L) + u64 spu_ecc_stat_RW; /* 0x1008 */ +#define SPU_ECC_CORRECTED_ERROR (1ull << 0ul) +#define SPU_ECC_UNCORRECTED_ERROR (1ull << 1ul) +#define SPU_ECC_SCRUB_COMPLETE (1ull << 2ul) +#define SPU_ECC_SCRUB_IN_PROGRESS (1ull << 3ul) +#define SPU_ECC_INSTRUCTION_ERROR (1ull << 4ul) +#define SPU_ECC_DATA_ERROR (1ull << 5ul) +#define SPU_ECC_DMA_ERROR (1ull << 6ul) +#define SPU_ECC_STATUS_CNT_MASK (256ull << 8) + u64 spu_ecc_addr_RW; /* 0x1010 */ + u64 spu_err_mask_RW; /* 0x1018 */ +#define SPU_ERR_ILLEGAL_INSTR (1ull << 0ul) +#define SPU_ERR_ILLEGAL_CHANNEL (1ull << 1ul) + u8 pad_0x1020_0x1028[0x1028 - 0x1020]; /* 0x1020 */ + + /* SPU Debug-Trace Bus (DTB) Selection Registers */ + u64 spu_trig0_sel; /* 0x1028 */ + u64 spu_trig1_sel; /* 0x1030 */ + u64 spu_trig2_sel; /* 0x1038 */ + u64 spu_trig3_sel; /* 0x1040 */ + u64 spu_trace_sel; /* 0x1048 */ +#define spu_trace_sel_mask 0x1f1fLL +#define spu_trace_sel_bus0_bits 0x1000LL +#define spu_trace_sel_bus2_bits 0x0010LL + u64 spu_event0_sel; /* 0x1050 */ + u64 spu_event1_sel; /* 0x1058 */ + u64 spu_event2_sel; /* 0x1060 */ + u64 spu_event3_sel; /* 0x1068 */ + u64 spu_trace_cntl; /* 0x1070 */ +} __attribute__ ((aligned(0x2000))); + +#endif /* __KERNEL__ */ +#endif diff --git a/arch/powerpc/include/asm/spu_csa.h b/arch/powerpc/include/asm/spu_csa.h new file mode 100644 index 000000000..c33df961c --- /dev/null +++ b/arch/powerpc/include/asm/spu_csa.h @@ -0,0 +1,247 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * spu_csa.h: Definitions for SPU context save area (CSA). + * + * (C) Copyright IBM 2005 + * + * Author: Mark Nutter <mnutter@us.ibm.com> + */ + +#ifndef _SPU_CSA_H_ +#define _SPU_CSA_H_ +#ifdef __KERNEL__ + +/* + * Total number of 128-bit registers. + */ +#define NR_SPU_GPRS 128 +#define NR_SPU_SPRS 9 +#define NR_SPU_REGS_PAD 7 +#define NR_SPU_SPILL_REGS 144 /* GPRS + SPRS + PAD */ +#define SIZEOF_SPU_SPILL_REGS NR_SPU_SPILL_REGS * 16 + +#define SPU_SAVE_COMPLETE 0x3FFB +#define SPU_RESTORE_COMPLETE 0x3FFC + +/* + * Definitions for various 'stopped' status conditions, + * to be recreated during context restore. + */ +#define SPU_STOPPED_STATUS_P 1 +#define SPU_STOPPED_STATUS_I 2 +#define SPU_STOPPED_STATUS_H 3 +#define SPU_STOPPED_STATUS_S 4 +#define SPU_STOPPED_STATUS_S_I 5 +#define SPU_STOPPED_STATUS_S_P 6 +#define SPU_STOPPED_STATUS_P_H 7 +#define SPU_STOPPED_STATUS_P_I 8 +#define SPU_STOPPED_STATUS_R 9 + +/* + * Definitions for software decrementer status flag. + */ +#define SPU_DECR_STATUS_RUNNING 0x1 +#define SPU_DECR_STATUS_WRAPPED 0x2 + +#ifndef __ASSEMBLY__ +/** + * spu_reg128 - generic 128-bit register definition. + */ +struct spu_reg128 { + u32 slot[4]; +}; + +/** + * struct spu_lscsa - Local Store Context Save Area. + * @gprs: Array of saved registers. + * @fpcr: Saved floating point status control register. + * @decr: Saved decrementer value. + * @decr_status: Indicates software decrementer status flags. + * @ppu_mb: Saved PPU mailbox data. + * @ppuint_mb: Saved PPU interrupting mailbox data. + * @tag_mask: Saved tag group mask. + * @event_mask: Saved event mask. + * @srr0: Saved SRR0. + * @stopped_status: Conditions to be recreated by restore. + * @ls: Saved contents of Local Storage Area. + * + * The LSCSA represents state that is primarily saved and + * restored by SPU-side code. + */ +struct spu_lscsa { + struct spu_reg128 gprs[128]; + struct spu_reg128 fpcr; + struct spu_reg128 decr; + struct spu_reg128 decr_status; + struct spu_reg128 ppu_mb; + struct spu_reg128 ppuint_mb; + struct spu_reg128 tag_mask; + struct spu_reg128 event_mask; + struct spu_reg128 srr0; + struct spu_reg128 stopped_status; + + /* + * 'ls' must be page-aligned on all configurations. + * Since we don't want to rely on having the spu-gcc + * installed to build the kernel and this structure + * is used in the SPU-side code, make it 64k-page + * aligned for now. + */ + unsigned char ls[LS_SIZE] __attribute__((aligned(65536))); +}; + +#ifndef __SPU__ +/* + * struct spu_problem_collapsed - condensed problem state area, w/o pads. + */ +struct spu_problem_collapsed { + u64 spc_mssync_RW; + u32 mfc_lsa_W; + u32 unused_pad0; + u64 mfc_ea_W; + union mfc_tag_size_class_cmd mfc_union_W; + u32 dma_qstatus_R; + u32 dma_querytype_RW; + u32 dma_querymask_RW; + u32 dma_tagstatus_R; + u32 pu_mb_R; + u32 spu_mb_W; + u32 mb_stat_R; + u32 spu_runcntl_RW; + u32 spu_status_R; + u32 spu_spc_R; + u32 spu_npc_RW; + u32 signal_notify1; + u32 signal_notify2; + u32 unused_pad1; +}; + +/* + * struct spu_priv1_collapsed - condensed privileged 1 area, w/o pads. + */ +struct spu_priv1_collapsed { + u64 mfc_sr1_RW; + u64 mfc_lpid_RW; + u64 spu_idr_RW; + u64 mfc_vr_RO; + u64 spu_vr_RO; + u64 int_mask_class0_RW; + u64 int_mask_class1_RW; + u64 int_mask_class2_RW; + u64 int_stat_class0_RW; + u64 int_stat_class1_RW; + u64 int_stat_class2_RW; + u64 int_route_RW; + u64 mfc_atomic_flush_RW; + u64 resource_allocation_groupID_RW; + u64 resource_allocation_enable_RW; + u64 mfc_fir_R; + u64 mfc_fir_status_or_W; + u64 mfc_fir_status_and_W; + u64 mfc_fir_mask_R; + u64 mfc_fir_mask_or_W; + u64 mfc_fir_mask_and_W; + u64 mfc_fir_chkstp_enable_RW; + u64 smf_sbi_signal_sel; + u64 smf_ato_signal_sel; + u64 tlb_index_hint_RO; + u64 tlb_index_W; + u64 tlb_vpn_RW; + u64 tlb_rpn_RW; + u64 tlb_invalidate_entry_W; + u64 tlb_invalidate_all_W; + u64 smm_hid; + u64 mfc_accr_RW; + u64 mfc_dsisr_RW; + u64 mfc_dar_RW; + u64 rmt_index_RW; + u64 rmt_data1_RW; + u64 mfc_dsir_R; + u64 mfc_lsacr_RW; + u64 mfc_lscrr_R; + u64 mfc_tclass_id_RW; + u64 mfc_rm_boundary; + u64 smf_dma_signal_sel; + u64 smm_signal_sel; + u64 mfc_cer_R; + u64 pu_ecc_cntl_RW; + u64 pu_ecc_stat_RW; + u64 spu_ecc_addr_RW; + u64 spu_err_mask_RW; + u64 spu_trig0_sel; + u64 spu_trig1_sel; + u64 spu_trig2_sel; + u64 spu_trig3_sel; + u64 spu_trace_sel; + u64 spu_event0_sel; + u64 spu_event1_sel; + u64 spu_event2_sel; + u64 spu_event3_sel; + u64 spu_trace_cntl; +}; + +/* + * struct spu_priv2_collapsed - condensed privileged 2 area, w/o pads. + */ +struct spu_priv2_collapsed { + u64 slb_index_W; + u64 slb_esid_RW; + u64 slb_vsid_RW; + u64 slb_invalidate_entry_W; + u64 slb_invalidate_all_W; + struct mfc_cq_sr spuq[16]; + struct mfc_cq_sr puq[8]; + u64 mfc_control_RW; + u64 puint_mb_R; + u64 spu_privcntl_RW; + u64 spu_lslr_RW; + u64 spu_chnlcntptr_RW; + u64 spu_chnlcnt_RW; + u64 spu_chnldata_RW; + u64 spu_cfg_RW; + u64 spu_tag_status_query_RW; + u64 spu_cmd_buf1_RW; + u64 spu_cmd_buf2_RW; + u64 spu_atomic_status_RW; +}; + +/** + * struct spu_state + * @lscsa: Local Store Context Save Area. + * @prob: Collapsed Problem State Area, w/o pads. + * @priv1: Collapsed Privileged 1 Area, w/o pads. + * @priv2: Collapsed Privileged 2 Area, w/o pads. + * @spu_chnlcnt_RW: Array of saved channel counts. + * @spu_chnldata_RW: Array of saved channel data. + * @suspend_time: Time stamp when decrementer disabled. + * + * Structure representing the whole of the SPU + * context save area (CSA). This struct contains + * all of the state necessary to suspend and then + * later optionally resume execution of an SPU + * context. + * + * The @lscsa region is by far the largest, and is + * allocated separately so that it may either be + * pinned or mapped to/from application memory, as + * appropriate for the OS environment. + */ +struct spu_state { + struct spu_lscsa *lscsa; + struct spu_problem_collapsed prob; + struct spu_priv1_collapsed priv1; + struct spu_priv2_collapsed priv2; + u64 spu_chnlcnt_RW[32]; + u64 spu_chnldata_RW[32]; + u32 spu_mailbox_data[4]; + u32 pu_mailbox_data[1]; + u64 class_0_dar, class_0_pending; + u64 class_1_dar, class_1_dsisr; + unsigned long suspend_time; + spinlock_t register_lock; +}; + +#endif /* !__SPU__ */ +#endif /* __KERNEL__ */ +#endif /* !__ASSEMBLY__ */ +#endif /* _SPU_CSA_H_ */ diff --git a/arch/powerpc/include/asm/spu_info.h b/arch/powerpc/include/asm/spu_info.h new file mode 100644 index 000000000..732431034 --- /dev/null +++ b/arch/powerpc/include/asm/spu_info.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * SPU info structures + * + * (C) Copyright 2006 IBM Corp. + * + * Author: Dwayne Grant McConnell <decimal@us.ibm.com> + */ +#ifndef _SPU_INFO_H +#define _SPU_INFO_H + +#include <asm/spu.h> +#include <uapi/asm/spu_info.h> + +#endif diff --git a/arch/powerpc/include/asm/spu_priv1.h b/arch/powerpc/include/asm/spu_priv1.h new file mode 100644 index 000000000..2167d756e --- /dev/null +++ b/arch/powerpc/include/asm/spu_priv1.h @@ -0,0 +1,224 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Defines an spu hypervisor abstraction layer. + * + * Copyright 2006 Sony Corp. + */ + +#if !defined(_SPU_PRIV1_H) +#define _SPU_PRIV1_H +#if defined(__KERNEL__) + +#include <linux/types.h> + +struct spu; +struct spu_context; + +/* access to priv1 registers */ + +struct spu_priv1_ops { + void (*int_mask_and) (struct spu *spu, int class, u64 mask); + void (*int_mask_or) (struct spu *spu, int class, u64 mask); + void (*int_mask_set) (struct spu *spu, int class, u64 mask); + u64 (*int_mask_get) (struct spu *spu, int class); + void (*int_stat_clear) (struct spu *spu, int class, u64 stat); + u64 (*int_stat_get) (struct spu *spu, int class); + void (*cpu_affinity_set) (struct spu *spu, int cpu); + u64 (*mfc_dar_get) (struct spu *spu); + u64 (*mfc_dsisr_get) (struct spu *spu); + void (*mfc_dsisr_set) (struct spu *spu, u64 dsisr); + void (*mfc_sdr_setup) (struct spu *spu); + void (*mfc_sr1_set) (struct spu *spu, u64 sr1); + u64 (*mfc_sr1_get) (struct spu *spu); + void (*mfc_tclass_id_set) (struct spu *spu, u64 tclass_id); + u64 (*mfc_tclass_id_get) (struct spu *spu); + void (*tlb_invalidate) (struct spu *spu); + void (*resource_allocation_groupID_set) (struct spu *spu, u64 id); + u64 (*resource_allocation_groupID_get) (struct spu *spu); + void (*resource_allocation_enable_set) (struct spu *spu, u64 enable); + u64 (*resource_allocation_enable_get) (struct spu *spu); +}; + +extern const struct spu_priv1_ops* spu_priv1_ops; + +static inline void +spu_int_mask_and (struct spu *spu, int class, u64 mask) +{ + spu_priv1_ops->int_mask_and(spu, class, mask); +} + +static inline void +spu_int_mask_or (struct spu *spu, int class, u64 mask) +{ + spu_priv1_ops->int_mask_or(spu, class, mask); +} + +static inline void +spu_int_mask_set (struct spu *spu, int class, u64 mask) +{ + spu_priv1_ops->int_mask_set(spu, class, mask); +} + +static inline u64 +spu_int_mask_get (struct spu *spu, int class) +{ + return spu_priv1_ops->int_mask_get(spu, class); +} + +static inline void +spu_int_stat_clear (struct spu *spu, int class, u64 stat) +{ + spu_priv1_ops->int_stat_clear(spu, class, stat); +} + +static inline u64 +spu_int_stat_get (struct spu *spu, int class) +{ + return spu_priv1_ops->int_stat_get (spu, class); +} + +static inline void +spu_cpu_affinity_set (struct spu *spu, int cpu) +{ + spu_priv1_ops->cpu_affinity_set(spu, cpu); +} + +static inline u64 +spu_mfc_dar_get (struct spu *spu) +{ + return spu_priv1_ops->mfc_dar_get(spu); +} + +static inline u64 +spu_mfc_dsisr_get (struct spu *spu) +{ + return spu_priv1_ops->mfc_dsisr_get(spu); +} + +static inline void +spu_mfc_dsisr_set (struct spu *spu, u64 dsisr) +{ + spu_priv1_ops->mfc_dsisr_set(spu, dsisr); +} + +static inline void +spu_mfc_sdr_setup (struct spu *spu) +{ + spu_priv1_ops->mfc_sdr_setup(spu); +} + +static inline void +spu_mfc_sr1_set (struct spu *spu, u64 sr1) +{ + spu_priv1_ops->mfc_sr1_set(spu, sr1); +} + +static inline u64 +spu_mfc_sr1_get (struct spu *spu) +{ + return spu_priv1_ops->mfc_sr1_get(spu); +} + +static inline void +spu_mfc_tclass_id_set (struct spu *spu, u64 tclass_id) +{ + spu_priv1_ops->mfc_tclass_id_set(spu, tclass_id); +} + +static inline u64 +spu_mfc_tclass_id_get (struct spu *spu) +{ + return spu_priv1_ops->mfc_tclass_id_get(spu); +} + +static inline void +spu_tlb_invalidate (struct spu *spu) +{ + spu_priv1_ops->tlb_invalidate(spu); +} + +static inline void +spu_resource_allocation_groupID_set (struct spu *spu, u64 id) +{ + spu_priv1_ops->resource_allocation_groupID_set(spu, id); +} + +static inline u64 +spu_resource_allocation_groupID_get (struct spu *spu) +{ + return spu_priv1_ops->resource_allocation_groupID_get(spu); +} + +static inline void +spu_resource_allocation_enable_set (struct spu *spu, u64 enable) +{ + spu_priv1_ops->resource_allocation_enable_set(spu, enable); +} + +static inline u64 +spu_resource_allocation_enable_get (struct spu *spu) +{ + return spu_priv1_ops->resource_allocation_enable_get(spu); +} + +/* spu management abstraction */ + +struct spu_management_ops { + int (*enumerate_spus)(int (*fn)(void *data)); + int (*create_spu)(struct spu *spu, void *data); + int (*destroy_spu)(struct spu *spu); + void (*enable_spu)(struct spu_context *ctx); + void (*disable_spu)(struct spu_context *ctx); + int (*init_affinity)(void); +}; + +extern const struct spu_management_ops* spu_management_ops; + +static inline int +spu_enumerate_spus (int (*fn)(void *data)) +{ + return spu_management_ops->enumerate_spus(fn); +} + +static inline int +spu_create_spu (struct spu *spu, void *data) +{ + return spu_management_ops->create_spu(spu, data); +} + +static inline int +spu_destroy_spu (struct spu *spu) +{ + return spu_management_ops->destroy_spu(spu); +} + +static inline int +spu_init_affinity (void) +{ + return spu_management_ops->init_affinity(); +} + +static inline void +spu_enable_spu (struct spu_context *ctx) +{ + spu_management_ops->enable_spu(ctx); +} + +static inline void +spu_disable_spu (struct spu_context *ctx) +{ + spu_management_ops->disable_spu(ctx); +} + +/* + * The declarations following are put here for convenience + * and only intended to be used by the platform setup code. + */ + +extern const struct spu_priv1_ops spu_priv1_mmio_ops; +extern const struct spu_priv1_ops spu_priv1_beat_ops; + +extern const struct spu_management_ops spu_management_of_ops; + +#endif /* __KERNEL__ */ +#endif diff --git a/arch/powerpc/include/asm/sstep.h b/arch/powerpc/include/asm/sstep.h new file mode 100644 index 000000000..972ed0df1 --- /dev/null +++ b/arch/powerpc/include/asm/sstep.h @@ -0,0 +1,182 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2004 Paul Mackerras <paulus@au.ibm.com>, IBM + */ +#include <asm/inst.h> + +struct pt_regs; + +/* + * We don't allow single-stepping an mtmsrd that would clear + * MSR_RI, since that would make the exception unrecoverable. + * Since we need to single-step to proceed from a breakpoint, + * we don't allow putting a breakpoint on an mtmsrd instruction. + * Similarly we don't allow breakpoints on rfid instructions. + * These macros tell us if an instruction is a mtmsrd or rfid. + * Note that IS_MTMSRD returns true for both an mtmsr (32-bit) + * and an mtmsrd (64-bit). + */ +#define IS_MTMSRD(instr) ((ppc_inst_val(instr) & 0xfc0007be) == 0x7c000124) +#define IS_RFID(instr) ((ppc_inst_val(instr) & 0xfc0007fe) == 0x4c000024) +#define IS_RFI(instr) ((ppc_inst_val(instr) & 0xfc0007fe) == 0x4c000064) + +enum instruction_type { + COMPUTE, /* arith/logical/CR op, etc. */ + LOAD, /* load and store types need to be contiguous */ + LOAD_MULTI, + LOAD_FP, + LOAD_VMX, + LOAD_VSX, + STORE, + STORE_MULTI, + STORE_FP, + STORE_VMX, + STORE_VSX, + LARX, + STCX, + BRANCH, + MFSPR, + MTSPR, + CACHEOP, + BARRIER, + SYSCALL, + SYSCALL_VECTORED_0, + MFMSR, + MTMSR, + RFI, + INTERRUPT, + UNKNOWN +}; + +#define INSTR_TYPE_MASK 0x1f + +#define OP_IS_LOAD(type) ((LOAD <= (type) && (type) <= LOAD_VSX) || (type) == LARX) +#define OP_IS_STORE(type) ((STORE <= (type) && (type) <= STORE_VSX) || (type) == STCX) +#define OP_IS_LOAD_STORE(type) (LOAD <= (type) && (type) <= STCX) + +/* Compute flags, ORed in with type */ +#define SETREG 0x20 +#define SETCC 0x40 +#define SETXER 0x80 + +/* Branch flags, ORed in with type */ +#define SETLK 0x20 +#define BRTAKEN 0x40 +#define DECCTR 0x80 + +/* Load/store flags, ORed in with type */ +#define SIGNEXT 0x20 +#define UPDATE 0x40 /* matches bit in opcode 31 instructions */ +#define BYTEREV 0x80 +#define FPCONV 0x100 + +/* Barrier type field, ORed in with type */ +#define BARRIER_MASK 0xe0 +#define BARRIER_SYNC 0x00 +#define BARRIER_ISYNC 0x20 +#define BARRIER_EIEIO 0x40 +#define BARRIER_LWSYNC 0x60 +#define BARRIER_PTESYNC 0x80 + +/* Cacheop values, ORed in with type */ +#define CACHEOP_MASK 0x700 +#define DCBST 0 +#define DCBF 0x100 +#define DCBTST 0x200 +#define DCBT 0x300 +#define ICBI 0x400 +#define DCBZ 0x500 + +/* VSX flags values */ +#define VSX_FPCONV 1 /* do floating point SP/DP conversion */ +#define VSX_SPLAT 2 /* store loaded value into all elements */ +#define VSX_LDLEFT 4 /* load VSX register from left */ +#define VSX_CHECK_VEC 8 /* check MSR_VEC not MSR_VSX for reg >= 32 */ + +/* Prefixed flag, ORed in with type */ +#define PREFIXED 0x800 + +/* Size field in type word */ +#define SIZE(n) ((n) << 12) +#define GETSIZE(w) ((w) >> 12) + +#define GETTYPE(t) ((t) & INSTR_TYPE_MASK) +#define GETLENGTH(t) (((t) & PREFIXED) ? 8 : 4) + +#define MKOP(t, f, s) ((t) | (f) | SIZE(s)) + +/* Prefix instruction operands */ +#define GET_PREFIX_RA(i) (((i) >> 16) & 0x1f) +#define GET_PREFIX_R(i) ((i) & (1ul << 20)) + +extern s32 patch__exec_instr; + +struct instruction_op { + int type; + int reg; + unsigned long val; + /* For LOAD/STORE/LARX/STCX */ + unsigned long ea; + int update_reg; + /* For MFSPR */ + int spr; + u32 ccval; + u32 xerval; + u8 element_size; /* for VSX/VMX loads/stores */ + u8 vsx_flags; +}; + +union vsx_reg { + u8 b[16]; + u16 h[8]; + u32 w[4]; + unsigned long d[2]; + float fp[4]; + double dp[2]; + __vector128 v; +}; + +/* + * Decode an instruction, and return information about it in *op + * without changing *regs. + * + * Return value is 1 if the instruction can be emulated just by + * updating *regs with the information in *op, -1 if we need the + * GPRs but *regs doesn't contain the full register set, or 0 + * otherwise. + */ +extern int analyse_instr(struct instruction_op *op, const struct pt_regs *regs, + struct ppc_inst instr); + +/* + * Emulate an instruction that can be executed just by updating + * fields in *regs. + */ +void emulate_update_regs(struct pt_regs *reg, struct instruction_op *op); + +/* + * Emulate instructions that cause a transfer of control, + * arithmetic/logical instructions, loads and stores, + * cache operations and barriers. + * + * Returns 1 if the instruction was emulated successfully, + * 0 if it could not be emulated, or -1 for an instruction that + * should not be emulated (rfid, mtmsrd clearing MSR_RI, etc.). + */ +extern int emulate_step(struct pt_regs *regs, struct ppc_inst instr); + +/* + * Emulate a load or store instruction by reading/writing the + * memory of the current process. FP/VMX/VSX registers are assumed + * to hold live values if the appropriate enable bit in regs->msr is + * set; otherwise this will use the saved values in the thread struct + * for user-mode accesses. + */ +extern int emulate_loadstore(struct pt_regs *regs, struct instruction_op *op); + +extern void emulate_vsx_load(struct instruction_op *op, union vsx_reg *reg, + const void *mem, bool cross_endian); +extern void emulate_vsx_store(struct instruction_op *op, + const union vsx_reg *reg, void *mem, + bool cross_endian); +extern int emulate_dcbz(unsigned long ea, struct pt_regs *regs); diff --git a/arch/powerpc/include/asm/stackprotector.h b/arch/powerpc/include/asm/stackprotector.h new file mode 100644 index 000000000..1c8460e23 --- /dev/null +++ b/arch/powerpc/include/asm/stackprotector.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * GCC stack protector support. + * + */ + +#ifndef _ASM_STACKPROTECTOR_H +#define _ASM_STACKPROTECTOR_H + +#include <linux/random.h> +#include <linux/version.h> +#include <asm/reg.h> +#include <asm/current.h> +#include <asm/paca.h> + +/* + * Initialize the stackprotector canary value. + * + * NOTE: this must only be called from functions that never return, + * and it must always be inlined. + */ +static __always_inline void boot_init_stack_canary(void) +{ + unsigned long canary; + + /* Try to get a semi random initial value. */ + canary = get_random_canary(); + canary ^= mftb(); + canary ^= LINUX_VERSION_CODE; + canary &= CANARY_MASK; + + current->stack_canary = canary; +#ifdef CONFIG_PPC64 + get_paca()->canary = canary; +#endif +} + +#endif /* _ASM_STACKPROTECTOR_H */ diff --git a/arch/powerpc/include/asm/stacktrace.h b/arch/powerpc/include/asm/stacktrace.h new file mode 100644 index 000000000..6149b53b3 --- /dev/null +++ b/arch/powerpc/include/asm/stacktrace.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Stack trace functions. + * + * Copyright 2018, Murilo Opsfelder Araujo, IBM Corporation. + */ + +#ifndef _ASM_POWERPC_STACKTRACE_H +#define _ASM_POWERPC_STACKTRACE_H + +void show_user_instructions(struct pt_regs *regs); + +#endif /* _ASM_POWERPC_STACKTRACE_H */ diff --git a/arch/powerpc/include/asm/string.h b/arch/powerpc/include/asm/string.h new file mode 100644 index 000000000..2aa0e31e6 --- /dev/null +++ b/arch/powerpc/include/asm/string.h @@ -0,0 +1,85 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_STRING_H +#define _ASM_POWERPC_STRING_H + +#ifdef __KERNEL__ + +#ifndef CONFIG_KASAN +#define __HAVE_ARCH_STRNCPY +#define __HAVE_ARCH_STRNCMP +#define __HAVE_ARCH_MEMCHR +#define __HAVE_ARCH_MEMCMP +#define __HAVE_ARCH_MEMSET16 +#endif + +#define __HAVE_ARCH_MEMSET +#define __HAVE_ARCH_MEMCPY +#define __HAVE_ARCH_MEMMOVE +#define __HAVE_ARCH_MEMCPY_FLUSHCACHE + +extern char * strcpy(char *,const char *); +extern char * strncpy(char *,const char *, __kernel_size_t); +extern __kernel_size_t strlen(const char *); +extern int strcmp(const char *,const char *); +extern int strncmp(const char *, const char *, __kernel_size_t); +extern char * strcat(char *, const char *); +extern void * memset(void *,int,__kernel_size_t); +extern void * memcpy(void *,const void *,__kernel_size_t); +extern void * memmove(void *,const void *,__kernel_size_t); +extern int memcmp(const void *,const void *,__kernel_size_t); +extern void * memchr(const void *,int,__kernel_size_t); +void memcpy_flushcache(void *dest, const void *src, size_t size); + +void *__memset(void *s, int c, __kernel_size_t count); +void *__memcpy(void *to, const void *from, __kernel_size_t n); +void *__memmove(void *to, const void *from, __kernel_size_t n); + +#if defined(CONFIG_KASAN) && !defined(__SANITIZE_ADDRESS__) +/* + * For files that are not instrumented (e.g. mm/slub.c) we + * should use not instrumented version of mem* functions. + */ +#define memcpy(dst, src, len) __memcpy(dst, src, len) +#define memmove(dst, src, len) __memmove(dst, src, len) +#define memset(s, c, n) __memset(s, c, n) + +#ifndef __NO_FORTIFY +#define __NO_FORTIFY /* FORTIFY_SOURCE uses __builtin_memcpy, etc. */ +#endif + +#endif + +#ifdef CONFIG_PPC64 +#ifndef CONFIG_KASAN +#define __HAVE_ARCH_MEMSET32 +#define __HAVE_ARCH_MEMSET64 + +extern void *__memset16(uint16_t *, uint16_t v, __kernel_size_t); +extern void *__memset32(uint32_t *, uint32_t v, __kernel_size_t); +extern void *__memset64(uint64_t *, uint64_t v, __kernel_size_t); + +static inline void *memset16(uint16_t *p, uint16_t v, __kernel_size_t n) +{ + return __memset16(p, v, n * 2); +} + +static inline void *memset32(uint32_t *p, uint32_t v, __kernel_size_t n) +{ + return __memset32(p, v, n * 4); +} + +static inline void *memset64(uint64_t *p, uint64_t v, __kernel_size_t n) +{ + return __memset64(p, v, n * 8); +} +#endif +#else +#ifndef CONFIG_KASAN +#define __HAVE_ARCH_STRLEN +#endif + +extern void *memset16(uint16_t *, uint16_t, __kernel_size_t); +#endif +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_STRING_H */ diff --git a/arch/powerpc/include/asm/svm.h b/arch/powerpc/include/asm/svm.h new file mode 100644 index 000000000..7546402d7 --- /dev/null +++ b/arch/powerpc/include/asm/svm.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * SVM helper functions + * + * Copyright 2018 Anshuman Khandual, IBM Corporation. + */ + +#ifndef _ASM_POWERPC_SVM_H +#define _ASM_POWERPC_SVM_H + +#ifdef CONFIG_PPC_SVM + +static inline bool is_secure_guest(void) +{ + return mfmsr() & MSR_S; +} + +void __init svm_swiotlb_init(void); + +void dtl_cache_ctor(void *addr); +#define get_dtl_cache_ctor() (is_secure_guest() ? dtl_cache_ctor : NULL) + +#else /* CONFIG_PPC_SVM */ + +static inline bool is_secure_guest(void) +{ + return false; +} + +static inline void svm_swiotlb_init(void) {} + +#define get_dtl_cache_ctor() NULL + +#endif /* CONFIG_PPC_SVM */ +#endif /* _ASM_POWERPC_SVM_H */ diff --git a/arch/powerpc/include/asm/swab.h b/arch/powerpc/include/asm/swab.h new file mode 100644 index 000000000..f4cfdc124 --- /dev/null +++ b/arch/powerpc/include/asm/swab.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + */ +#ifndef _ASM_POWERPC_SWAB_H +#define _ASM_POWERPC_SWAB_H + +#include <uapi/asm/swab.h> + +#endif /* _ASM_POWERPC_SWAB_H */ diff --git a/arch/powerpc/include/asm/swiotlb.h b/arch/powerpc/include/asm/swiotlb.h new file mode 100644 index 000000000..3c1a1cd16 --- /dev/null +++ b/arch/powerpc/include/asm/swiotlb.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2009 Becky Bruce, Freescale Semiconductor + */ + +#ifndef __ASM_SWIOTLB_H +#define __ASM_SWIOTLB_H + +#include <linux/swiotlb.h> + +extern unsigned int ppc_swiotlb_enable; + +#ifdef CONFIG_SWIOTLB +void swiotlb_detect_4g(void); +#else +static inline void swiotlb_detect_4g(void) {} +#endif + +#endif /* __ASM_SWIOTLB_H */ diff --git a/arch/powerpc/include/asm/switch_to.h b/arch/powerpc/include/asm/switch_to.h new file mode 100644 index 000000000..9d1fbd8be --- /dev/null +++ b/arch/powerpc/include/asm/switch_to.h @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> + */ +#ifndef _ASM_POWERPC_SWITCH_TO_H +#define _ASM_POWERPC_SWITCH_TO_H + +#include <linux/sched.h> +#include <asm/reg.h> + +struct thread_struct; +struct task_struct; +struct pt_regs; + +extern struct task_struct *__switch_to(struct task_struct *, + struct task_struct *); +#define switch_to(prev, next, last) ((last) = __switch_to((prev), (next))) + +extern struct task_struct *_switch(struct thread_struct *prev, + struct thread_struct *next); + +extern void switch_booke_debug_regs(struct debug_reg *new_debug); + +extern int emulate_altivec(struct pt_regs *); + +#ifdef CONFIG_PPC_BOOK3S_64 +void restore_math(struct pt_regs *regs); +#else +static inline void restore_math(struct pt_regs *regs) +{ +} +#endif + +void restore_tm_state(struct pt_regs *regs); + +extern void flush_all_to_thread(struct task_struct *); +extern void giveup_all(struct task_struct *); + +#ifdef CONFIG_PPC_FPU +extern void enable_kernel_fp(void); +extern void flush_fp_to_thread(struct task_struct *); +extern void giveup_fpu(struct task_struct *); +extern void save_fpu(struct task_struct *); +static inline void disable_kernel_fp(void) +{ + msr_check_and_clear(MSR_FP); +} +#else +static inline void save_fpu(struct task_struct *t) { } +static inline void flush_fp_to_thread(struct task_struct *t) { } +#endif + +#ifdef CONFIG_ALTIVEC +extern void enable_kernel_altivec(void); +extern void flush_altivec_to_thread(struct task_struct *); +extern void giveup_altivec(struct task_struct *); +extern void save_altivec(struct task_struct *); +static inline void disable_kernel_altivec(void) +{ + msr_check_and_clear(MSR_VEC); +} +#else +static inline void save_altivec(struct task_struct *t) { } +static inline void __giveup_altivec(struct task_struct *t) { } +#endif + +#ifdef CONFIG_VSX +extern void enable_kernel_vsx(void); +extern void flush_vsx_to_thread(struct task_struct *); +static inline void disable_kernel_vsx(void) +{ + msr_check_and_clear(MSR_FP|MSR_VEC|MSR_VSX); +} +#else +static inline void enable_kernel_vsx(void) +{ + BUILD_BUG(); +} + +static inline void disable_kernel_vsx(void) +{ + BUILD_BUG(); +} +#endif + +#ifdef CONFIG_SPE +extern void enable_kernel_spe(void); +extern void flush_spe_to_thread(struct task_struct *); +extern void giveup_spe(struct task_struct *); +extern void __giveup_spe(struct task_struct *); +static inline void disable_kernel_spe(void) +{ + msr_check_and_clear(MSR_SPE); +} +#else +static inline void __giveup_spe(struct task_struct *t) { } +#endif + +static inline void clear_task_ebb(struct task_struct *t) +{ +#ifdef CONFIG_PPC_BOOK3S_64 + /* EBB perf events are not inherited, so clear all EBB state. */ + t->thread.ebbrr = 0; + t->thread.ebbhr = 0; + t->thread.bescr = 0; + t->thread.mmcr2 = 0; + t->thread.mmcr0 = 0; + t->thread.siar = 0; + t->thread.sdar = 0; + t->thread.sier = 0; + t->thread.used_ebb = 0; +#endif +} + +extern int set_thread_tidr(struct task_struct *t); + +#endif /* _ASM_POWERPC_SWITCH_TO_H */ diff --git a/arch/powerpc/include/asm/synch.h b/arch/powerpc/include/asm/synch.h new file mode 100644 index 000000000..1d67bc8d7 --- /dev/null +++ b/arch/powerpc/include/asm/synch.h @@ -0,0 +1,70 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_SYNCH_H +#define _ASM_POWERPC_SYNCH_H +#ifdef __KERNEL__ + +#include <asm/cputable.h> +#include <asm/feature-fixups.h> +#include <asm/ppc-opcode.h> + +#ifndef __ASSEMBLY__ +extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup; +extern void do_lwsync_fixups(unsigned long value, void *fixup_start, + void *fixup_end); + +static inline void eieio(void) +{ + __asm__ __volatile__ ("eieio" : : : "memory"); +} + +static inline void isync(void) +{ + __asm__ __volatile__ ("isync" : : : "memory"); +} + +static inline void ppc_after_tlbiel_barrier(void) +{ + asm volatile("ptesync": : :"memory"); + /* + * POWER9, POWER10 need a cp_abort after tlbiel to ensure the copy is + * invalidated correctly. If this is not done, the paste can take data + * from the physical address that was translated at copy time. + * + * POWER9 in practice does not need this, because address spaces with + * accelerators mapped will use tlbie (which does invalidate the copy) + * to invalidate translations. It's not possible to limit POWER10 this + * way due to local copy-paste. + */ + asm volatile(ASM_FTR_IFSET(PPC_CP_ABORT, "", %0) : : "i" (CPU_FTR_ARCH_31) : "memory"); +} +#endif /* __ASSEMBLY__ */ + +#if defined(__powerpc64__) +# define LWSYNC lwsync +#elif defined(CONFIG_E500) +# define LWSYNC \ + START_LWSYNC_SECTION(96); \ + sync; \ + MAKE_LWSYNC_SECTION_ENTRY(96, __lwsync_fixup); +#else +# define LWSYNC sync +#endif + +#ifdef CONFIG_SMP +#define __PPC_ACQUIRE_BARRIER \ + START_LWSYNC_SECTION(97); \ + isync; \ + MAKE_LWSYNC_SECTION_ENTRY(97, __lwsync_fixup); +#define PPC_ACQUIRE_BARRIER "\n" stringify_in_c(__PPC_ACQUIRE_BARRIER) +#define PPC_RELEASE_BARRIER stringify_in_c(LWSYNC) "\n" +#define PPC_ATOMIC_ENTRY_BARRIER "\n" stringify_in_c(sync) "\n" +#define PPC_ATOMIC_EXIT_BARRIER "\n" stringify_in_c(sync) "\n" +#else +#define PPC_ACQUIRE_BARRIER +#define PPC_RELEASE_BARRIER +#define PPC_ATOMIC_ENTRY_BARRIER +#define PPC_ATOMIC_EXIT_BARRIER +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_SYNCH_H */ diff --git a/arch/powerpc/include/asm/syscall.h b/arch/powerpc/include/asm/syscall.h new file mode 100644 index 000000000..ba0f88f3a --- /dev/null +++ b/arch/powerpc/include/asm/syscall.h @@ -0,0 +1,131 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Access to user system call parameters and results + * + * Copyright (C) 2008 Red Hat, Inc. All rights reserved. + * + * See asm-generic/syscall.h for descriptions of what we must do here. + */ + +#ifndef _ASM_SYSCALL_H +#define _ASM_SYSCALL_H 1 + +#include <uapi/linux/audit.h> +#include <linux/sched.h> +#include <linux/thread_info.h> + +/* ftrace syscalls requires exporting the sys_call_table */ +extern const unsigned long sys_call_table[]; +extern const unsigned long compat_sys_call_table[]; + +static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs) +{ + /* + * Note that we are returning an int here. That means 0xffffffff, ie. + * 32-bit negative 1, will be interpreted as -1 on a 64-bit kernel. + * This is important for seccomp so that compat tasks can set r0 = -1 + * to reject the syscall. + */ + if (trap_is_syscall(regs)) + return regs->gpr[0]; + else + return -1; +} + +static inline void syscall_rollback(struct task_struct *task, + struct pt_regs *regs) +{ + regs->gpr[3] = regs->orig_gpr3; +} + +static inline long syscall_get_error(struct task_struct *task, + struct pt_regs *regs) +{ + if (trap_is_scv(regs)) { + unsigned long error = regs->gpr[3]; + + return IS_ERR_VALUE(error) ? error : 0; + } else { + /* + * If the system call failed, + * regs->gpr[3] contains a positive ERRORCODE. + */ + return (regs->ccr & 0x10000000UL) ? -regs->gpr[3] : 0; + } +} + +static inline long syscall_get_return_value(struct task_struct *task, + struct pt_regs *regs) +{ + return regs->gpr[3]; +} + +static inline void syscall_set_return_value(struct task_struct *task, + struct pt_regs *regs, + int error, long val) +{ + if (trap_is_scv(regs)) { + regs->gpr[3] = (long) error ?: val; + } else { + /* + * In the general case it's not obvious that we must deal with + * CCR here, as the syscall exit path will also do that for us. + * However there are some places, eg. the signal code, which + * check ccr to decide if the value in r3 is actually an error. + */ + if (error) { + regs->ccr |= 0x10000000L; + regs->gpr[3] = error; + } else { + regs->ccr &= ~0x10000000L; + regs->gpr[3] = val; + } + } +} + +static inline void syscall_get_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned long *args) +{ + unsigned long val, mask = -1UL; + unsigned int n = 6; + +#ifdef CONFIG_COMPAT + if (test_tsk_thread_flag(task, TIF_32BIT)) + mask = 0xffffffff; +#endif + while (n--) { + if (n == 0) + val = regs->orig_gpr3; + else + val = regs->gpr[3 + n]; + + args[n] = val & mask; + } +} + +static inline void syscall_set_arguments(struct task_struct *task, + struct pt_regs *regs, + const unsigned long *args) +{ + memcpy(®s->gpr[3], args, 6 * sizeof(args[0])); + + /* Also copy the first argument into orig_gpr3 */ + regs->orig_gpr3 = args[0]; +} + +static inline int syscall_get_arch(struct task_struct *task) +{ + int arch; + + if (IS_ENABLED(CONFIG_PPC64) && !test_tsk_thread_flag(task, TIF_32BIT)) + arch = AUDIT_ARCH_PPC64; + else + arch = AUDIT_ARCH_PPC; + +#ifdef __LITTLE_ENDIAN__ + arch |= __AUDIT_ARCH_LE; +#endif + return arch; +} +#endif /* _ASM_SYSCALL_H */ diff --git a/arch/powerpc/include/asm/syscalls.h b/arch/powerpc/include/asm/syscalls.h new file mode 100644 index 000000000..398171fdc --- /dev/null +++ b/arch/powerpc/include/asm/syscalls.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_POWERPC_SYSCALLS_H +#define __ASM_POWERPC_SYSCALLS_H +#ifdef __KERNEL__ + +#include <linux/compiler.h> +#include <linux/linkage.h> +#include <linux/types.h> + +struct rtas_args; + +asmlinkage long sys_mmap(unsigned long addr, size_t len, + unsigned long prot, unsigned long flags, + unsigned long fd, off_t offset); +asmlinkage long sys_mmap2(unsigned long addr, size_t len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long pgoff); +asmlinkage long ppc64_personality(unsigned long personality); +asmlinkage long sys_rtas(struct rtas_args __user *uargs); + +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_SYSCALLS_H */ diff --git a/arch/powerpc/include/asm/task_size_32.h b/arch/powerpc/include/asm/task_size_32.h new file mode 100644 index 000000000..de7290ee7 --- /dev/null +++ b/arch/powerpc/include/asm/task_size_32.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_TASK_SIZE_32_H +#define _ASM_POWERPC_TASK_SIZE_32_H + +#if CONFIG_TASK_SIZE > CONFIG_KERNEL_START +#error User TASK_SIZE overlaps with KERNEL_START address +#endif + +#define TASK_SIZE (CONFIG_TASK_SIZE) + +/* + * This decides where the kernel will search for a free chunk of vm space during + * mmap's. + */ +#define TASK_UNMAPPED_BASE (TASK_SIZE / 8 * 3) + +#define DEFAULT_MAP_WINDOW TASK_SIZE +#define STACK_TOP TASK_SIZE +#define STACK_TOP_MAX STACK_TOP + +#endif /* _ASM_POWERPC_TASK_SIZE_32_H */ diff --git a/arch/powerpc/include/asm/task_size_64.h b/arch/powerpc/include/asm/task_size_64.h new file mode 100644 index 000000000..c99348223 --- /dev/null +++ b/arch/powerpc/include/asm/task_size_64.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_TASK_SIZE_64_H +#define _ASM_POWERPC_TASK_SIZE_64_H + +/* + * 64-bit user address space can have multiple limits + * For now supported values are: + */ +#define TASK_SIZE_64TB (0x0000400000000000UL) +#define TASK_SIZE_128TB (0x0000800000000000UL) +#define TASK_SIZE_512TB (0x0002000000000000UL) +#define TASK_SIZE_1PB (0x0004000000000000UL) +#define TASK_SIZE_2PB (0x0008000000000000UL) + +/* + * With 52 bits in the address we can support up to 4PB of range. + */ +#define TASK_SIZE_4PB (0x0010000000000000UL) + +/* + * For now 512TB is only supported with book3s and 64K linux page size. + */ +#ifdef CONFIG_PPC_64K_PAGES +/* + * Max value currently used: + */ +#define TASK_SIZE_USER64 TASK_SIZE_4PB +#define DEFAULT_MAP_WINDOW_USER64 TASK_SIZE_128TB +#define TASK_CONTEXT_SIZE TASK_SIZE_512TB +#else +#define TASK_SIZE_USER64 TASK_SIZE_64TB +#define DEFAULT_MAP_WINDOW_USER64 TASK_SIZE_64TB + +/* + * We don't need to allocate extended context ids for 4K page size, because we + * limit the max effective address on this config to 64TB. + */ +#define TASK_CONTEXT_SIZE TASK_SIZE_64TB +#endif + +/* + * 32-bit user address space is 4GB - 1 page + * (this 1 page is needed so referencing of 0xFFFFFFFF generates EFAULT + */ +#define TASK_SIZE_USER32 (0x0000000100000000UL - (1 * PAGE_SIZE)) + +#define TASK_SIZE_OF(tsk) \ + (test_tsk_thread_flag(tsk, TIF_32BIT) ? TASK_SIZE_USER32 : \ + TASK_SIZE_USER64) + +#define TASK_SIZE TASK_SIZE_OF(current) + +#define TASK_UNMAPPED_BASE_USER32 (PAGE_ALIGN(TASK_SIZE_USER32 / 4)) +#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(DEFAULT_MAP_WINDOW_USER64 / 4)) + +/* + * This decides where the kernel will search for a free chunk of vm space during + * mmap's. + */ +#define TASK_UNMAPPED_BASE \ + ((is_32bit_task()) ? TASK_UNMAPPED_BASE_USER32 : TASK_UNMAPPED_BASE_USER64) + +/* + * Initial task size value for user applications. For book3s 64 we start + * with 128TB and conditionally enable upto 512TB + */ +#ifdef CONFIG_PPC_BOOK3S_64 +#define DEFAULT_MAP_WINDOW \ + ((is_32bit_task()) ? TASK_SIZE_USER32 : DEFAULT_MAP_WINDOW_USER64) +#else +#define DEFAULT_MAP_WINDOW TASK_SIZE +#endif + +#define STACK_TOP_USER64 DEFAULT_MAP_WINDOW_USER64 +#define STACK_TOP_USER32 TASK_SIZE_USER32 +#define STACK_TOP_MAX TASK_SIZE_USER64 +#define STACK_TOP (is_32bit_task() ? STACK_TOP_USER32 : STACK_TOP_USER64) + +#endif /* _ASM_POWERPC_TASK_SIZE_64_H */ diff --git a/arch/powerpc/include/asm/tce.h b/arch/powerpc/include/asm/tce.h new file mode 100644 index 000000000..db5fc2f22 --- /dev/null +++ b/arch/powerpc/include/asm/tce.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation + * Rewrite, cleanup: + * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation + */ + +#ifndef _ASM_POWERPC_TCE_H +#define _ASM_POWERPC_TCE_H +#ifdef __KERNEL__ + +#include <asm/iommu.h> + +/* + * Tces come in two formats, one for the virtual bus and a different + * format for PCI. PCI TCEs can have hardware or software maintianed + * coherency. + */ +#define TCE_VB 0 +#define TCE_PCI 1 + +/* TCE page size is 4096 bytes (1 << 12) */ + +#define TCE_SHIFT 12 +#define TCE_PAGE_SIZE (1 << TCE_SHIFT) + +#define TCE_ENTRY_SIZE 8 /* each TCE is 64 bits */ + +#define TCE_RPN_MASK 0xfffffffffful /* 40-bit RPN (4K pages) */ +#define TCE_RPN_SHIFT 12 +#define TCE_VALID 0x800 /* TCE valid */ +#define TCE_ALLIO 0x400 /* TCE valid for all lpars */ +#define TCE_PCI_WRITE 0x2 /* write from PCI allowed */ +#define TCE_PCI_READ 0x1 /* read from PCI allowed */ +#define TCE_VB_WRITE 0x1 /* write from VB allowed */ + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_TCE_H */ diff --git a/arch/powerpc/include/asm/termios.h b/arch/powerpc/include/asm/termios.h new file mode 100644 index 000000000..205de8f8a --- /dev/null +++ b/arch/powerpc/include/asm/termios.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Liberally adapted from alpha/termios.h. In particular, the c_cc[] + * fields have been reordered so that termio & termios share the + * common subset in the same order (for brain dead programs that don't + * know or care about the differences). + */ +#ifndef _ASM_POWERPC_TERMIOS_H +#define _ASM_POWERPC_TERMIOS_H + +#include <uapi/asm/termios.h> + +/* ^C ^\ del ^U ^D 1 0 0 0 0 ^W ^R ^Z ^Q ^S ^V ^U */ +#define INIT_C_CC "\003\034\177\025\004\001\000\000\000\000\027\022\032\021\023\026\025" + +#include <asm-generic/termios-base.h> + +#endif /* _ASM_POWERPC_TERMIOS_H */ diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h new file mode 100644 index 000000000..ff31d2fa2 --- /dev/null +++ b/arch/powerpc/include/asm/thread_info.h @@ -0,0 +1,187 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* thread_info.h: PowerPC low-level thread information + * adapted from the i386 version by Paul Mackerras + * + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + */ + +#ifndef _ASM_POWERPC_THREAD_INFO_H +#define _ASM_POWERPC_THREAD_INFO_H + +#include <asm/asm-const.h> +#include <asm/page.h> + +#ifdef __KERNEL__ + +#ifdef CONFIG_KASAN +#define MIN_THREAD_SHIFT (CONFIG_THREAD_SHIFT + 1) +#else +#define MIN_THREAD_SHIFT CONFIG_THREAD_SHIFT +#endif + +#if defined(CONFIG_VMAP_STACK) && MIN_THREAD_SHIFT < PAGE_SHIFT +#define THREAD_SHIFT PAGE_SHIFT +#else +#define THREAD_SHIFT MIN_THREAD_SHIFT +#endif + +#define THREAD_SIZE (1 << THREAD_SHIFT) + +/* + * By aligning VMAP'd stacks to 2 * THREAD_SIZE, we can detect overflow by + * checking sp & (1 << THREAD_SHIFT), which we can do cheaply in the entry + * assembly. + */ +#ifdef CONFIG_VMAP_STACK +#define THREAD_ALIGN_SHIFT (THREAD_SHIFT + 1) +#else +#define THREAD_ALIGN_SHIFT THREAD_SHIFT +#endif + +#define THREAD_ALIGN (1 << THREAD_ALIGN_SHIFT) + +#ifndef __ASSEMBLY__ +#include <linux/cache.h> +#include <asm/processor.h> +#include <asm/page.h> +#include <asm/accounting.h> + +#define SLB_PRELOAD_NR 16U +/* + * low level task data. + */ +struct thread_info { + int preempt_count; /* 0 => preemptable, + <0 => BUG */ + unsigned long local_flags; /* private flags for thread */ +#ifdef CONFIG_LIVEPATCH + unsigned long *livepatch_sp; +#endif +#if defined(CONFIG_VIRT_CPU_ACCOUNTING_NATIVE) && defined(CONFIG_PPC32) + struct cpu_accounting_data accounting; +#endif + unsigned char slb_preload_nr; + unsigned char slb_preload_tail; + u32 slb_preload_esid[SLB_PRELOAD_NR]; + + /* low level flags - has atomic operations done on it */ + unsigned long flags ____cacheline_aligned_in_smp; +}; + +/* + * macros/functions for gaining access to the thread information structure + */ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .preempt_count = INIT_PREEMPT_COUNT, \ + .flags = 0, \ +} + +#define THREAD_SIZE_ORDER (THREAD_SHIFT - PAGE_SHIFT) + +/* how to get the thread information struct from C */ +extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src); + +#ifdef CONFIG_PPC_BOOK3S_64 +void arch_setup_new_exec(void); +#define arch_setup_new_exec arch_setup_new_exec +#endif + +#endif /* __ASSEMBLY__ */ + +/* + * thread information flag bit numbers + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_NOTIFY_SIGNAL 3 /* signal notifications exist */ +#define TIF_SYSCALL_EMU 4 /* syscall emulation active */ +#define TIF_RESTORE_TM 5 /* need to restore TM FP/VEC/VSX */ +#define TIF_PATCH_PENDING 6 /* pending live patching update */ +#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ +#define TIF_SINGLESTEP 8 /* singlestepping active */ +#define TIF_NOHZ 9 /* in adaptive nohz mode */ +#define TIF_SECCOMP 10 /* secure computing */ +#define TIF_RESTOREALL 11 /* Restore all regs (implies NOERROR) */ +#define TIF_NOERROR 12 /* Force successful syscall return */ +#define TIF_NOTIFY_RESUME 13 /* callback before returning to user */ +#define TIF_UPROBE 14 /* breakpointed or single-stepping */ +#define TIF_SYSCALL_TRACEPOINT 15 /* syscall tracepoint instrumentation */ +#define TIF_EMULATE_STACK_STORE 16 /* Is an instruction emulation + for stack store? */ +#define TIF_MEMDIE 17 /* is terminating due to OOM killer */ +#if defined(CONFIG_PPC64) +#define TIF_ELF2ABI 18 /* function descriptors must die! */ +#endif +#define TIF_POLLING_NRFLAG 19 /* true if poll_idle() is polling TIF_NEED_RESCHED */ +#define TIF_32BIT 20 /* 32 bit binary */ + +/* as above, but as bit values */ +#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) +#define _TIF_SIGPENDING (1<<TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) +#define _TIF_NOTIFY_SIGNAL (1<<TIF_NOTIFY_SIGNAL) +#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) +#define _TIF_32BIT (1<<TIF_32BIT) +#define _TIF_RESTORE_TM (1<<TIF_RESTORE_TM) +#define _TIF_PATCH_PENDING (1<<TIF_PATCH_PENDING) +#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT) +#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP) +#define _TIF_SECCOMP (1<<TIF_SECCOMP) +#define _TIF_RESTOREALL (1<<TIF_RESTOREALL) +#define _TIF_NOERROR (1<<TIF_NOERROR) +#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) +#define _TIF_UPROBE (1<<TIF_UPROBE) +#define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT) +#define _TIF_EMULATE_STACK_STORE (1<<TIF_EMULATE_STACK_STORE) +#define _TIF_NOHZ (1<<TIF_NOHZ) +#define _TIF_SYSCALL_EMU (1<<TIF_SYSCALL_EMU) +#define _TIF_SYSCALL_DOTRACE (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ + _TIF_SECCOMP | _TIF_SYSCALL_TRACEPOINT | \ + _TIF_NOHZ | _TIF_SYSCALL_EMU) + +#define _TIF_USER_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \ + _TIF_NOTIFY_RESUME | _TIF_UPROBE | \ + _TIF_RESTORE_TM | _TIF_PATCH_PENDING | \ + _TIF_NOTIFY_SIGNAL) +#define _TIF_PERSYSCALL_MASK (_TIF_RESTOREALL|_TIF_NOERROR) + +/* Bits in local_flags */ +/* Don't move TLF_NAPPING without adjusting the code in entry_32.S */ +#define TLF_NAPPING 0 /* idle thread enabled NAP mode */ +#define TLF_SLEEPING 1 /* suspend code enabled SLEEP mode */ +#define TLF_LAZY_MMU 3 /* tlb_batch is active */ +#define TLF_RUNLATCH 4 /* Is the runlatch enabled? */ + +#define _TLF_NAPPING (1 << TLF_NAPPING) +#define _TLF_SLEEPING (1 << TLF_SLEEPING) +#define _TLF_LAZY_MMU (1 << TLF_LAZY_MMU) +#define _TLF_RUNLATCH (1 << TLF_RUNLATCH) + +#ifndef __ASSEMBLY__ + +static inline bool test_thread_local_flags(unsigned int flags) +{ + struct thread_info *ti = current_thread_info(); + return (ti->local_flags & flags) != 0; +} + +#ifdef CONFIG_COMPAT +#define is_32bit_task() (test_thread_flag(TIF_32BIT)) +#else +#define is_32bit_task() (IS_ENABLED(CONFIG_PPC32)) +#endif + +#if defined(CONFIG_PPC64) +#define is_elf2_task() (test_thread_flag(TIF_ELF2ABI)) +#else +#define is_elf2_task() (0) +#endif + +#endif /* !__ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_THREAD_INFO_H */ diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h new file mode 100644 index 000000000..2f566c1a7 --- /dev/null +++ b/arch/powerpc/include/asm/time.h @@ -0,0 +1,138 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Common time prototypes and such for all ppc machines. + * + * Written by Cort Dougan (cort@cs.nmt.edu) to merge + * Paul Mackerras' version and mine for PReP and Pmac. + */ + +#ifndef __POWERPC_TIME_H +#define __POWERPC_TIME_H + +#ifdef __KERNEL__ +#include <linux/types.h> +#include <linux/percpu.h> + +#include <asm/processor.h> +#include <asm/cpu_has_feature.h> + +/* time.c */ +extern unsigned long tb_ticks_per_jiffy; +extern unsigned long tb_ticks_per_usec; +extern unsigned long tb_ticks_per_sec; +extern struct clock_event_device decrementer_clockevent; + + +extern void generic_calibrate_decr(void); + +/* Some sane defaults: 125 MHz timebase, 1GHz processor */ +extern unsigned long ppc_proc_freq; +#define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8) +extern unsigned long ppc_tb_freq; +#define DEFAULT_TB_FREQ 125000000UL + +extern bool tb_invalid; + +struct div_result { + u64 result_high; + u64 result_low; +}; + +/* For compatibility, get_tbl() is defined as get_tb() on ppc64 */ +static inline unsigned long get_tbl(void) +{ + return mftb(); +} + +static inline u64 get_vtb(void) +{ +#ifdef CONFIG_PPC_BOOK3S_64 + if (cpu_has_feature(CPU_FTR_ARCH_207S)) + return mfspr(SPRN_VTB); +#endif + return 0; +} + +static inline u64 get_tb(void) +{ + unsigned int tbhi, tblo, tbhi2; + + if (IS_ENABLED(CONFIG_PPC64)) + return mftb(); + + do { + tbhi = mftbu(); + tblo = mftb(); + tbhi2 = mftbu(); + } while (tbhi != tbhi2); + + return ((u64)tbhi << 32) | tblo; +} + +static inline void set_tb(unsigned int upper, unsigned int lower) +{ + mtspr(SPRN_TBWL, 0); + mtspr(SPRN_TBWU, upper); + mtspr(SPRN_TBWL, lower); +} + +/* Accessor functions for the decrementer register. + * The 4xx doesn't even have a decrementer. I tried to use the + * generic timer interrupt code, which seems OK, with the 4xx PIT + * in auto-reload mode. The problem is PIT stops counting when it + * hits zero. If it would wrap, we could use it just like a decrementer. + */ +static inline u64 get_dec(void) +{ + if (IS_ENABLED(CONFIG_40x)) + return mfspr(SPRN_PIT); + + return mfspr(SPRN_DEC); +} + +/* + * Note: Book E and 4xx processors differ from other PowerPC processors + * in when the decrementer generates its interrupt: on the 1 to 0 + * transition for Book E/4xx, but on the 0 to -1 transition for others. + */ +static inline void set_dec(u64 val) +{ + if (IS_ENABLED(CONFIG_40x)) + mtspr(SPRN_PIT, (u32)val); + else if (IS_ENABLED(CONFIG_BOOKE)) + mtspr(SPRN_DEC, val); + else + mtspr(SPRN_DEC, val - 1); +} + +static inline unsigned long tb_ticks_since(unsigned long tstamp) +{ + return mftb() - tstamp; +} + +#define mulhwu(x,y) \ +({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;}) + +#ifdef CONFIG_PPC64 +#define mulhdu(x,y) \ +({unsigned long z; asm ("mulhdu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;}) +#else +extern u64 mulhdu(u64, u64); +#endif + +extern void div128_by_32(u64 dividend_high, u64 dividend_low, + unsigned divisor, struct div_result *dr); + +extern void secondary_cpu_time_init(void); +extern void __init time_init(void); + +DECLARE_PER_CPU(u64, decrementers_next_tb); + +/* Convert timebase ticks to nanoseconds */ +unsigned long long tb_to_ns(unsigned long long tb_ticks); + +/* SPLPAR */ +void accumulate_stolen_time(void); + +#endif /* __KERNEL__ */ +#endif /* __POWERPC_TIME_H */ diff --git a/arch/powerpc/include/asm/timex.h b/arch/powerpc/include/asm/timex.h new file mode 100644 index 000000000..171602fd3 --- /dev/null +++ b/arch/powerpc/include/asm/timex.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_TIMEX_H +#define _ASM_POWERPC_TIMEX_H + +#ifdef __KERNEL__ + +/* + * PowerPC architecture timex specifications + */ + +#include <asm/cputable.h> +#include <asm/reg.h> + +#define CLOCK_TICK_RATE 1024000 /* Underlying HZ */ + +typedef unsigned long cycles_t; + +static inline cycles_t get_cycles(void) +{ + return mftb(); +} +#define get_cycles get_cycles + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_TIMEX_H */ diff --git a/arch/powerpc/include/asm/tlb.h b/arch/powerpc/include/asm/tlb.h new file mode 100644 index 000000000..d97f061fe --- /dev/null +++ b/arch/powerpc/include/asm/tlb.h @@ -0,0 +1,90 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * TLB shootdown specifics for powerpc + * + * Copyright (C) 2002 Anton Blanchard, IBM Corp. + * Copyright (C) 2002 Paul Mackerras, IBM Corp. + */ +#ifndef _ASM_POWERPC_TLB_H +#define _ASM_POWERPC_TLB_H +#ifdef __KERNEL__ + +#ifndef __powerpc64__ +#include <linux/pgtable.h> +#endif +#ifndef __powerpc64__ +#include <asm/page.h> +#include <asm/mmu.h> +#endif + +#include <linux/pagemap.h> + +#define tlb_start_vma(tlb, vma) do { } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) +#define __tlb_remove_tlb_entry __tlb_remove_tlb_entry + +#define tlb_flush tlb_flush +extern void tlb_flush(struct mmu_gather *tlb); +/* + * book3s: + * Hash does not use the linux page-tables, so we can avoid + * the TLB invalidate for page-table freeing, Radix otoh does use the + * page-tables and needs the TLBI. + * + * nohash: + * We still do TLB invalidate in the __pte_free_tlb routine before we + * add the page table pages to mmu gather table batch. + */ +#define tlb_needs_table_invalidate() radix_enabled() + +/* Get the generic bits... */ +#include <asm-generic/tlb.h> + +extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, + unsigned long address); + +static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, + unsigned long address) +{ +#ifdef CONFIG_PPC_BOOK3S_32 + if (pte_val(*ptep) & _PAGE_HASHPTE) + flush_hash_entry(tlb->mm, ptep, address); +#endif +} + +#ifdef CONFIG_SMP +static inline int mm_is_core_local(struct mm_struct *mm) +{ + return cpumask_subset(mm_cpumask(mm), + topology_sibling_cpumask(smp_processor_id())); +} + +#ifdef CONFIG_PPC_BOOK3S_64 +static inline int mm_is_thread_local(struct mm_struct *mm) +{ + if (atomic_read(&mm->context.active_cpus) > 1) + return false; + return cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)); +} +#else /* CONFIG_PPC_BOOK3S_64 */ +static inline int mm_is_thread_local(struct mm_struct *mm) +{ + return cpumask_equal(mm_cpumask(mm), + cpumask_of(smp_processor_id())); +} +#endif /* !CONFIG_PPC_BOOK3S_64 */ + +#else /* CONFIG_SMP */ +static inline int mm_is_core_local(struct mm_struct *mm) +{ + return 1; +} + +static inline int mm_is_thread_local(struct mm_struct *mm) +{ + return 1; +} +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_TLB_H */ diff --git a/arch/powerpc/include/asm/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h new file mode 100644 index 000000000..61fba43bf --- /dev/null +++ b/arch/powerpc/include/asm/tlbflush.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_TLBFLUSH_H +#define _ASM_POWERPC_TLBFLUSH_H + +#ifdef CONFIG_PPC_BOOK3S +#include <asm/book3s/tlbflush.h> +#else +#include <asm/nohash/tlbflush.h> +#endif /* !CONFIG_PPC_BOOK3S */ + +#endif /* _ASM_POWERPC_TLBFLUSH_H */ diff --git a/arch/powerpc/include/asm/tm.h b/arch/powerpc/include/asm/tm.h new file mode 100644 index 000000000..e94f6db5e --- /dev/null +++ b/arch/powerpc/include/asm/tm.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Transactional memory support routines to reclaim and recheckpoint + * transactional process state. + * + * Copyright 2012 Matt Evans & Michael Neuling, IBM Corporation. + */ + +#include <uapi/asm/tm.h> + +#ifndef __ASSEMBLY__ + +extern void tm_reclaim(struct thread_struct *thread, + uint8_t cause); +extern void tm_reclaim_current(uint8_t cause); +extern void tm_recheckpoint(struct thread_struct *thread); +extern void tm_save_sprs(struct thread_struct *thread); +extern void tm_restore_sprs(struct thread_struct *thread); + +extern bool tm_suspend_disabled; + +#endif /* __ASSEMBLY__ */ diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h new file mode 100644 index 000000000..b239ef589 --- /dev/null +++ b/arch/powerpc/include/asm/topology.h @@ -0,0 +1,138 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_TOPOLOGY_H +#define _ASM_POWERPC_TOPOLOGY_H +#ifdef __KERNEL__ + + +struct device; +struct device_node; +struct drmem_lmb; + +#ifdef CONFIG_NUMA + +/* + * If zone_reclaim_mode is enabled, a RECLAIM_DISTANCE of 10 will mean that + * all zones on all nodes will be eligible for zone_reclaim(). + */ +#define RECLAIM_DISTANCE 10 + +#include <asm/mmzone.h> + +#define cpumask_of_node(node) ((node) == -1 ? \ + cpu_all_mask : \ + node_to_cpumask_map[node]) + +struct pci_bus; +#ifdef CONFIG_PCI +extern int pcibus_to_node(struct pci_bus *bus); +#else +static inline int pcibus_to_node(struct pci_bus *bus) +{ + return -1; +} +#endif + +#define cpumask_of_pcibus(bus) (pcibus_to_node(bus) == -1 ? \ + cpu_all_mask : \ + cpumask_of_node(pcibus_to_node(bus))) + +int cpu_relative_distance(__be32 *cpu1_assoc, __be32 *cpu2_assoc); +extern int __node_distance(int, int); +#define node_distance(a, b) __node_distance(a, b) + +extern void __init dump_numa_cpu_topology(void); + +extern int sysfs_add_device_to_node(struct device *dev, int nid); +extern void sysfs_remove_device_from_node(struct device *dev, int nid); + +static inline void update_numa_cpu_lookup_table(unsigned int cpu, int node) +{ + numa_cpu_lookup_table[cpu] = node; +} + +static inline int early_cpu_to_node(int cpu) +{ + int nid; + + nid = numa_cpu_lookup_table[cpu]; + + /* + * Fall back to node 0 if nid is unset (it should be, except bugs). + * This allows callers to safely do NODE_DATA(early_cpu_to_node(cpu)). + */ + return (nid < 0) ? 0 : nid; +} + +int of_drconf_to_nid_single(struct drmem_lmb *lmb); +void update_numa_distance(struct device_node *node); + +#else + +static inline int early_cpu_to_node(int cpu) { return 0; } + +static inline void dump_numa_cpu_topology(void) {} + +static inline int sysfs_add_device_to_node(struct device *dev, int nid) +{ + return 0; +} + +static inline void sysfs_remove_device_from_node(struct device *dev, + int nid) +{ +} + +static inline void update_numa_cpu_lookup_table(unsigned int cpu, int node) {} + +static inline int cpu_relative_distance(__be32 *cpu1_assoc, __be32 *cpu2_assoc) +{ + return 0; +} + +static inline int of_drconf_to_nid_single(struct drmem_lmb *lmb) +{ + return first_online_node; +} + +static inline void update_numa_distance(struct device_node *node) {} +#endif /* CONFIG_NUMA */ + +#if defined(CONFIG_NUMA) && defined(CONFIG_PPC_SPLPAR) +extern int find_and_online_cpu_nid(int cpu); +extern int cpu_to_coregroup_id(int cpu); +#else +static inline int find_and_online_cpu_nid(int cpu) +{ + return 0; +} + +static inline int cpu_to_coregroup_id(int cpu) +{ +#ifdef CONFIG_SMP + return cpu_to_core_id(cpu); +#else + return 0; +#endif +} + +#endif /* CONFIG_NUMA && CONFIG_PPC_SPLPAR */ + +#include <asm-generic/topology.h> + +#ifdef CONFIG_SMP +#include <asm/cputable.h> + +#ifdef CONFIG_PPC64 +#include <asm/smp.h> + +#define topology_physical_package_id(cpu) (cpu_to_chip_id(cpu)) + +#define topology_sibling_cpumask(cpu) (per_cpu(cpu_sibling_map, cpu)) +#define topology_core_cpumask(cpu) (cpu_cpu_mask(cpu)) +#define topology_core_id(cpu) (cpu_to_core_id(cpu)) + +#endif +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_TOPOLOGY_H */ diff --git a/arch/powerpc/include/asm/trace.h b/arch/powerpc/include/asm/trace.h new file mode 100644 index 000000000..08cd60cd7 --- /dev/null +++ b/arch/powerpc/include/asm/trace.h @@ -0,0 +1,243 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM powerpc + +#if !defined(_TRACE_POWERPC_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_POWERPC_H + +#include <linux/tracepoint.h> + +struct pt_regs; + +DECLARE_EVENT_CLASS(ppc64_interrupt_class, + + TP_PROTO(struct pt_regs *regs), + + TP_ARGS(regs), + + TP_STRUCT__entry( + __field(struct pt_regs *, regs) + ), + + TP_fast_assign( + __entry->regs = regs; + ), + + TP_printk("pt_regs=%p", __entry->regs) +); + +DEFINE_EVENT(ppc64_interrupt_class, irq_entry, + + TP_PROTO(struct pt_regs *regs), + + TP_ARGS(regs) +); + +DEFINE_EVENT(ppc64_interrupt_class, irq_exit, + + TP_PROTO(struct pt_regs *regs), + + TP_ARGS(regs) +); + +DEFINE_EVENT(ppc64_interrupt_class, timer_interrupt_entry, + + TP_PROTO(struct pt_regs *regs), + + TP_ARGS(regs) +); + +DEFINE_EVENT(ppc64_interrupt_class, timer_interrupt_exit, + + TP_PROTO(struct pt_regs *regs), + + TP_ARGS(regs) +); + +#ifdef CONFIG_PPC_DOORBELL +DEFINE_EVENT(ppc64_interrupt_class, doorbell_entry, + + TP_PROTO(struct pt_regs *regs), + + TP_ARGS(regs) +); + +DEFINE_EVENT(ppc64_interrupt_class, doorbell_exit, + + TP_PROTO(struct pt_regs *regs), + + TP_ARGS(regs) +); +#endif + +#ifdef CONFIG_PPC_PSERIES +extern int hcall_tracepoint_regfunc(void); +extern void hcall_tracepoint_unregfunc(void); + +TRACE_EVENT_FN_COND(hcall_entry, + + TP_PROTO(unsigned long opcode, unsigned long *args), + + TP_ARGS(opcode, args), + + TP_CONDITION(cpu_online(raw_smp_processor_id())), + + TP_STRUCT__entry( + __field(unsigned long, opcode) + ), + + TP_fast_assign( + __entry->opcode = opcode; + ), + + TP_printk("opcode=%lu", __entry->opcode), + + hcall_tracepoint_regfunc, hcall_tracepoint_unregfunc +); + +TRACE_EVENT_FN_COND(hcall_exit, + + TP_PROTO(unsigned long opcode, long retval, unsigned long *retbuf), + + TP_ARGS(opcode, retval, retbuf), + + TP_CONDITION(cpu_online(raw_smp_processor_id())), + + TP_STRUCT__entry( + __field(unsigned long, opcode) + __field(long, retval) + ), + + TP_fast_assign( + __entry->opcode = opcode; + __entry->retval = retval; + ), + + TP_printk("opcode=%lu retval=%ld", __entry->opcode, __entry->retval), + + hcall_tracepoint_regfunc, hcall_tracepoint_unregfunc +); +#endif + +#ifdef CONFIG_PPC_POWERNV +extern int opal_tracepoint_regfunc(void); +extern void opal_tracepoint_unregfunc(void); + +TRACE_EVENT_FN(opal_entry, + + TP_PROTO(unsigned long opcode, unsigned long *args), + + TP_ARGS(opcode, args), + + TP_STRUCT__entry( + __field(unsigned long, opcode) + ), + + TP_fast_assign( + __entry->opcode = opcode; + ), + + TP_printk("opcode=%lu", __entry->opcode), + + opal_tracepoint_regfunc, opal_tracepoint_unregfunc +); + +TRACE_EVENT_FN(opal_exit, + + TP_PROTO(unsigned long opcode, unsigned long retval), + + TP_ARGS(opcode, retval), + + TP_STRUCT__entry( + __field(unsigned long, opcode) + __field(unsigned long, retval) + ), + + TP_fast_assign( + __entry->opcode = opcode; + __entry->retval = retval; + ), + + TP_printk("opcode=%lu retval=%lu", __entry->opcode, __entry->retval), + + opal_tracepoint_regfunc, opal_tracepoint_unregfunc +); +#endif + +TRACE_EVENT(hash_fault, + + TP_PROTO(unsigned long addr, unsigned long access, unsigned long trap), + TP_ARGS(addr, access, trap), + TP_STRUCT__entry( + __field(unsigned long, addr) + __field(unsigned long, access) + __field(unsigned long, trap) + ), + + TP_fast_assign( + __entry->addr = addr; + __entry->access = access; + __entry->trap = trap; + ), + + TP_printk("hash fault with addr 0x%lx and access = 0x%lx trap = 0x%lx", + __entry->addr, __entry->access, __entry->trap) +); + + +TRACE_EVENT(tlbie, + + TP_PROTO(unsigned long lpid, unsigned long local, unsigned long rb, + unsigned long rs, unsigned long ric, unsigned long prs, + unsigned long r), + TP_ARGS(lpid, local, rb, rs, ric, prs, r), + TP_STRUCT__entry( + __field(unsigned long, lpid) + __field(unsigned long, local) + __field(unsigned long, rb) + __field(unsigned long, rs) + __field(unsigned long, ric) + __field(unsigned long, prs) + __field(unsigned long, r) + ), + + TP_fast_assign( + __entry->lpid = lpid; + __entry->local = local; + __entry->rb = rb; + __entry->rs = rs; + __entry->ric = ric; + __entry->prs = prs; + __entry->r = r; + ), + + TP_printk("lpid=%ld, local=%ld, rb=0x%lx, rs=0x%lx, ric=0x%lx, " + "prs=0x%lx, r=0x%lx", __entry->lpid, __entry->local, + __entry->rb, __entry->rs, __entry->ric, __entry->prs, + __entry->r) +); + +TRACE_EVENT(tlbia, + + TP_PROTO(unsigned long id), + TP_ARGS(id), + TP_STRUCT__entry( + __field(unsigned long, id) + ), + + TP_fast_assign( + __entry->id = id; + ), + + TP_printk("ctx.id=0x%lx", __entry->id) +); + +#endif /* _TRACE_POWERPC_H */ + +#undef TRACE_INCLUDE_PATH +#undef TRACE_INCLUDE_FILE + +#define TRACE_INCLUDE_PATH asm +#define TRACE_INCLUDE_FILE trace + +#include <trace/define_trace.h> diff --git a/arch/powerpc/include/asm/trace_clock.h b/arch/powerpc/include/asm/trace_clock.h new file mode 100644 index 000000000..ef70c2f79 --- /dev/null +++ b/arch/powerpc/include/asm/trace_clock.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * + * Copyright (C) 2015 Naveen N. Rao, IBM Corporation + */ + +#ifndef _ASM_PPC_TRACE_CLOCK_H +#define _ASM_PPC_TRACE_CLOCK_H + +#include <linux/compiler.h> +#include <linux/types.h> + +extern u64 notrace trace_clock_ppc_tb(void); + +#define ARCH_TRACE_CLOCKS { trace_clock_ppc_tb, "ppc-tb", 0 }, + +#endif /* _ASM_PPC_TRACE_CLOCK_H */ diff --git a/arch/powerpc/include/asm/tsi108.h b/arch/powerpc/include/asm/tsi108.h new file mode 100644 index 000000000..8a2b6427d --- /dev/null +++ b/arch/powerpc/include/asm/tsi108.h @@ -0,0 +1,113 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * common routine and memory layout for Tundra TSI108(Grendel) host bridge + * memory controller. + * + * Author: Jacob Pan (jacob.pan@freescale.com) + * Alex Bounine (alexandreb@tundra.com) + * + * Copyright 2004-2006 Freescale Semiconductor, Inc. + */ + +#ifndef __PPC_KERNEL_TSI108_H +#define __PPC_KERNEL_TSI108_H + +#include <asm/pci-bridge.h> + +/* Size of entire register space */ +#define TSI108_REG_SIZE (0x10000) + +/* Sizes of register spaces for individual blocks */ +#define TSI108_HLP_SIZE 0x1000 +#define TSI108_PCI_SIZE 0x1000 +#define TSI108_CLK_SIZE 0x1000 +#define TSI108_PB_SIZE 0x1000 +#define TSI108_SD_SIZE 0x1000 +#define TSI108_DMA_SIZE 0x1000 +#define TSI108_ETH_SIZE 0x1000 +#define TSI108_I2C_SIZE 0x400 +#define TSI108_MPIC_SIZE 0x400 +#define TSI108_UART0_SIZE 0x200 +#define TSI108_GPIO_SIZE 0x200 +#define TSI108_UART1_SIZE 0x200 + +/* Offsets within Tsi108(A) CSR space for individual blocks */ +#define TSI108_HLP_OFFSET 0x0000 +#define TSI108_PCI_OFFSET 0x1000 +#define TSI108_CLK_OFFSET 0x2000 +#define TSI108_PB_OFFSET 0x3000 +#define TSI108_SD_OFFSET 0x4000 +#define TSI108_DMA_OFFSET 0x5000 +#define TSI108_ETH_OFFSET 0x6000 +#define TSI108_I2C_OFFSET 0x7000 +#define TSI108_MPIC_OFFSET 0x7400 +#define TSI108_UART0_OFFSET 0x7800 +#define TSI108_GPIO_OFFSET 0x7A00 +#define TSI108_UART1_OFFSET 0x7C00 + +/* Tsi108 registers used by common code components */ +#define TSI108_PCI_CSR (0x004) +#define TSI108_PCI_IRP_CFG_CTL (0x180) +#define TSI108_PCI_IRP_STAT (0x184) +#define TSI108_PCI_IRP_ENABLE (0x188) +#define TSI108_PCI_IRP_INTAD (0x18C) + +#define TSI108_PCI_IRP_STAT_P_INT (0x00400000) +#define TSI108_PCI_IRP_ENABLE_P_INT (0x00400000) + +#define TSI108_CG_PWRUP_STATUS (0x234) + +#define TSI108_PB_ISR (0x00C) +#define TSI108_PB_ERRCS (0x404) +#define TSI108_PB_AERR (0x408) + +#define TSI108_PB_ERRCS_ES (1 << 1) +#define TSI108_PB_ISR_PBS_RD_ERR (1 << 8) + +#define TSI108_PCI_CFG_SIZE (0x01000000) + +/* + * PHY Configuration Options + * + * Specify "bcm54xx" in the compatible property of your device tree phy + * nodes if your board uses the Broadcom PHYs + */ +#define TSI108_PHY_MV88E 0 /* Marvel 88Exxxx PHY */ +#define TSI108_PHY_BCM54XX 1 /* Broadcom BCM54xx PHY */ + +/* Global variables */ + +extern u32 tsi108_pci_cfg_base; +/* Exported functions */ + +extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val); +extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 * val); +extern void tsi108_clear_pci_error(u32 pci_cfg_base); + +extern phys_addr_t get_csrbase(void); + +typedef struct { + u32 regs; /* hw registers base address */ + u32 phyregs; /* phy registers base address */ + u16 phy; /* phy address */ + u16 irq_num; /* irq number */ + u8 mac_addr[6]; /* phy mac address */ + u16 phy_type; /* type of phy on board */ +} hw_info; + +extern u32 get_vir_csrbase(void); +extern u32 tsi108_csr_vir_base; + +static inline u32 tsi108_read_reg(u32 reg_offset) +{ + return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset)); +} + +static inline void tsi108_write_reg(u32 reg_offset, u32 val) +{ + out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val); +} + +#endif /* __PPC_KERNEL_TSI108_H */ diff --git a/arch/powerpc/include/asm/tsi108_irq.h b/arch/powerpc/include/asm/tsi108_irq.h new file mode 100644 index 000000000..df602ca4c --- /dev/null +++ b/arch/powerpc/include/asm/tsi108_irq.h @@ -0,0 +1,110 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * (C) Copyright 2005 Tundra Semiconductor Corp. + * Alex Bounine, <alexandreb at tundra.com). + * + * See file CREDITS for list of people who contributed to this + * project. + */ + +/* + * definitions for interrupt controller initialization and external interrupt + * demultiplexing on TSI108EMU/SVB boards. + */ + +#ifndef _ASM_POWERPC_TSI108_IRQ_H +#define _ASM_POWERPC_TSI108_IRQ_H + +/* + * Tsi108 interrupts + */ +#ifndef TSI108_IRQ_REG_BASE +#define TSI108_IRQ_REG_BASE 0 +#endif + +#define TSI108_IRQ(x) (TSI108_IRQ_REG_BASE + (x)) + +#define TSI108_MAX_VECTORS (36 + 4) /* 36 sources + PCI INT demux */ +#define MAX_TASK_PRIO 0xF + +#define TSI108_IRQ_SPURIOUS (TSI108_MAX_VECTORS) + +#define DEFAULT_PRIO_LVL 10 /* initial priority level */ + +/* Interrupt vectors assignment to external and internal + * sources of requests. */ + +/* EXTERNAL INTERRUPT SOURCES */ + +#define IRQ_TSI108_EXT_INT0 TSI108_IRQ(0) /* External Source at INT[0] */ +#define IRQ_TSI108_EXT_INT1 TSI108_IRQ(1) /* External Source at INT[1] */ +#define IRQ_TSI108_EXT_INT2 TSI108_IRQ(2) /* External Source at INT[2] */ +#define IRQ_TSI108_EXT_INT3 TSI108_IRQ(3) /* External Source at INT[3] */ + +/* INTERNAL INTERRUPT SOURCES */ + +#define IRQ_TSI108_RESERVED0 TSI108_IRQ(4) /* Reserved IRQ */ +#define IRQ_TSI108_RESERVED1 TSI108_IRQ(5) /* Reserved IRQ */ +#define IRQ_TSI108_RESERVED2 TSI108_IRQ(6) /* Reserved IRQ */ +#define IRQ_TSI108_RESERVED3 TSI108_IRQ(7) /* Reserved IRQ */ +#define IRQ_TSI108_DMA0 TSI108_IRQ(8) /* DMA0 */ +#define IRQ_TSI108_DMA1 TSI108_IRQ(9) /* DMA1 */ +#define IRQ_TSI108_DMA2 TSI108_IRQ(10) /* DMA2 */ +#define IRQ_TSI108_DMA3 TSI108_IRQ(11) /* DMA3 */ +#define IRQ_TSI108_UART0 TSI108_IRQ(12) /* UART0 */ +#define IRQ_TSI108_UART1 TSI108_IRQ(13) /* UART1 */ +#define IRQ_TSI108_I2C TSI108_IRQ(14) /* I2C */ +#define IRQ_TSI108_GPIO TSI108_IRQ(15) /* GPIO */ +#define IRQ_TSI108_GIGE0 TSI108_IRQ(16) /* GIGE0 */ +#define IRQ_TSI108_GIGE1 TSI108_IRQ(17) /* GIGE1 */ +#define IRQ_TSI108_RESERVED4 TSI108_IRQ(18) /* Reserved IRQ */ +#define IRQ_TSI108_HLP TSI108_IRQ(19) /* HLP */ +#define IRQ_TSI108_SDRAM TSI108_IRQ(20) /* SDC */ +#define IRQ_TSI108_PROC_IF TSI108_IRQ(21) /* Processor IF */ +#define IRQ_TSI108_RESERVED5 TSI108_IRQ(22) /* Reserved IRQ */ +#define IRQ_TSI108_PCI TSI108_IRQ(23) /* PCI/X block */ + +#define IRQ_TSI108_MBOX0 TSI108_IRQ(24) /* Mailbox 0 register */ +#define IRQ_TSI108_MBOX1 TSI108_IRQ(25) /* Mailbox 1 register */ +#define IRQ_TSI108_MBOX2 TSI108_IRQ(26) /* Mailbox 2 register */ +#define IRQ_TSI108_MBOX3 TSI108_IRQ(27) /* Mailbox 3 register */ + +#define IRQ_TSI108_DBELL0 TSI108_IRQ(28) /* Doorbell 0 */ +#define IRQ_TSI108_DBELL1 TSI108_IRQ(29) /* Doorbell 1 */ +#define IRQ_TSI108_DBELL2 TSI108_IRQ(30) /* Doorbell 2 */ +#define IRQ_TSI108_DBELL3 TSI108_IRQ(31) /* Doorbell 3 */ + +#define IRQ_TSI108_TIMER0 TSI108_IRQ(32) /* Global Timer 0 */ +#define IRQ_TSI108_TIMER1 TSI108_IRQ(33) /* Global Timer 1 */ +#define IRQ_TSI108_TIMER2 TSI108_IRQ(34) /* Global Timer 2 */ +#define IRQ_TSI108_TIMER3 TSI108_IRQ(35) /* Global Timer 3 */ + +/* + * PCI bus INTA# - INTD# lines demultiplexor + */ +#define IRQ_PCI_INTAD_BASE TSI108_IRQ(36) +#define IRQ_PCI_INTA (IRQ_PCI_INTAD_BASE + 0) +#define IRQ_PCI_INTB (IRQ_PCI_INTAD_BASE + 1) +#define IRQ_PCI_INTC (IRQ_PCI_INTAD_BASE + 2) +#define IRQ_PCI_INTD (IRQ_PCI_INTAD_BASE + 3) +#define NUM_PCI_IRQS (4) + +/* number of entries in vector dispatch table */ +#define IRQ_TSI108_TAB_SIZE (TSI108_MAX_VECTORS + 1) + +/* Mapping of MPIC outputs to processors' interrupt pins */ + +#define IDIR_INT_OUT0 0x1 +#define IDIR_INT_OUT1 0x2 +#define IDIR_INT_OUT2 0x4 +#define IDIR_INT_OUT3 0x8 + +/*--------------------------------------------------------------- + * IRQ line configuration parameters */ + +/* Interrupt delivery modes */ +typedef enum { + TSI108_IRQ_DIRECTED, + TSI108_IRQ_DISTRIBUTED, +} TSI108_IRQ_MODE; +#endif /* _ASM_POWERPC_TSI108_IRQ_H */ diff --git a/arch/powerpc/include/asm/tsi108_pci.h b/arch/powerpc/include/asm/tsi108_pci.h new file mode 100644 index 000000000..fb6f62669 --- /dev/null +++ b/arch/powerpc/include/asm/tsi108_pci.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2007 IBM Corp + */ + +#ifndef _ASM_POWERPC_TSI108_PCI_H +#define _ASM_POWERPC_TSI108_PCI_H + +#include <asm/tsi108.h> + +/* Register definitions */ +#define TSI108_PCI_P2O_BAR0 (TSI108_PCI_OFFSET + 0x10) +#define TSI108_PCI_P2O_BAR0_UPPER (TSI108_PCI_OFFSET + 0x14) +#define TSI108_PCI_P2O_BAR2 (TSI108_PCI_OFFSET + 0x18) +#define TSI108_PCI_P2O_BAR2_UPPER (TSI108_PCI_OFFSET + 0x1c) +#define TSI108_PCI_P2O_PAGE_SIZES (TSI108_PCI_OFFSET + 0x4c) +#define TSI108_PCI_PFAB_BAR0 (TSI108_PCI_OFFSET + 0x204) +#define TSI108_PCI_PFAB_BAR0_UPPER (TSI108_PCI_OFFSET + 0x208) +#define TSI108_PCI_PFAB_IO (TSI108_PCI_OFFSET + 0x20c) +#define TSI108_PCI_PFAB_IO_UPPER (TSI108_PCI_OFFSET + 0x210) +#define TSI108_PCI_PFAB_MEM32 (TSI108_PCI_OFFSET + 0x214) +#define TSI108_PCI_PFAB_PFM3 (TSI108_PCI_OFFSET + 0x220) +#define TSI108_PCI_PFAB_PFM4 (TSI108_PCI_OFFSET + 0x230) + +extern int tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary); +extern void tsi108_pci_int_init(struct device_node *node); +extern void tsi108_irq_cascade(struct irq_desc *desc); +extern void tsi108_clear_pci_cfg_error(void); + +#endif /* _ASM_POWERPC_TSI108_PCI_H */ diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h new file mode 100644 index 000000000..f1630c553 --- /dev/null +++ b/arch/powerpc/include/asm/types.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * This file is never included by application software unless + * explicitly requested (e.g., via linux/types.h) in which case the + * application is Linux specific so (user-) name space pollution is + * not a major issue. However, for interoperability, libraries still + * need to be careful to avoid a name clashes. + */ +#ifndef _ASM_POWERPC_TYPES_H +#define _ASM_POWERPC_TYPES_H + +#include <uapi/asm/types.h> + +#ifdef __powerpc64__ +#if defined(_CALL_ELF) && _CALL_ELF == 2 +#define PPC64_ELF_ABI_v2 +#else +#define PPC64_ELF_ABI_v1 +#endif +#endif /* __powerpc64__ */ + +#ifndef __ASSEMBLY__ + +typedef __vector128 vector128; + +typedef struct { + unsigned long entry; + unsigned long toc; + unsigned long env; +} func_descr_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_POWERPC_TYPES_H */ diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h new file mode 100644 index 000000000..6b808bcde --- /dev/null +++ b/arch/powerpc/include/asm/uaccess.h @@ -0,0 +1,592 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ARCH_POWERPC_UACCESS_H +#define _ARCH_POWERPC_UACCESS_H + +#include <asm/ppc_asm.h> +#include <asm/processor.h> +#include <asm/page.h> +#include <asm/extable.h> +#include <asm/kup.h> + +#ifdef __powerpc64__ +/* We use TASK_SIZE_USER64 as TASK_SIZE is not constant */ +#define TASK_SIZE_MAX TASK_SIZE_USER64 +#else +#define TASK_SIZE_MAX TASK_SIZE +#endif + +static inline bool __access_ok(unsigned long addr, unsigned long size) +{ + return addr < TASK_SIZE_MAX && size <= TASK_SIZE_MAX - addr; +} + +#define access_ok(addr, size) \ + (__chk_user_ptr(addr), \ + __access_ok((unsigned long)(addr), (size))) + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + * + * This gets kind of ugly. We want to return _two_ values in "get_user()" + * and yet we don't want to do any pointers, because that is too much + * of a performance impact. Thus we have a few rather ugly macros here, + * and hide all the ugliness from the user. + * + * The "__xxx" versions of the user access functions are versions that + * do not verify the address space, that must have been done previously + * with a separate "access_ok()" call (this is used when we do multiple + * accesses to the same area of user memory). + * + * As we use the same address space for kernel and user data on the + * PowerPC, we can just do these as direct assignments. (Of course, the + * exception handling means that it's no longer "just"...) + * + */ +#define get_user(x, ptr) \ + __get_user_check((x), (ptr), sizeof(*(ptr))) +#define put_user(x, ptr) \ + __put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) + +#define __get_user(x, ptr) \ + __get_user_nocheck((x), (ptr), sizeof(*(ptr)), true) +#define __put_user(x, ptr) \ + __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) +#define __put_user_goto(x, ptr, label) \ + __put_user_nocheck_goto((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)), label) + +#define __get_user_allowed(x, ptr) \ + __get_user_nocheck((x), (ptr), sizeof(*(ptr)), false) + +#define __get_user_inatomic(x, ptr) \ + __get_user_nosleep((x), (ptr), sizeof(*(ptr))) +#define __put_user_inatomic(x, ptr) \ + __put_user_nosleep((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) + +#ifdef CONFIG_PPC64 + +#define ___get_user_instr(gu_op, dest, ptr) \ +({ \ + long __gui_ret = 0; \ + unsigned long __gui_ptr = (unsigned long)ptr; \ + struct ppc_inst __gui_inst; \ + unsigned int __prefix, __suffix; \ + __gui_ret = gu_op(__prefix, (unsigned int __user *)__gui_ptr); \ + if (__gui_ret == 0) { \ + if ((__prefix >> 26) == OP_PREFIX) { \ + __gui_ret = gu_op(__suffix, \ + (unsigned int __user *)__gui_ptr + 1); \ + __gui_inst = ppc_inst_prefix(__prefix, \ + __suffix); \ + } else { \ + __gui_inst = ppc_inst(__prefix); \ + } \ + if (__gui_ret == 0) \ + (dest) = __gui_inst; \ + } \ + __gui_ret; \ +}) + +#define get_user_instr(x, ptr) \ + ___get_user_instr(get_user, x, ptr) + +#define __get_user_instr(x, ptr) \ + ___get_user_instr(__get_user, x, ptr) + +#define __get_user_instr_inatomic(x, ptr) \ + ___get_user_instr(__get_user_inatomic, x, ptr) + +#else /* !CONFIG_PPC64 */ +#define get_user_instr(x, ptr) \ + get_user((x).val, (u32 __user *)(ptr)) + +#define __get_user_instr(x, ptr) \ + __get_user_nocheck((x).val, (u32 __user *)(ptr), sizeof(u32), true) + +#define __get_user_instr_inatomic(x, ptr) \ + __get_user_nosleep((x).val, (u32 __user *)(ptr), sizeof(u32)) + +#endif /* CONFIG_PPC64 */ + +extern long __put_user_bad(void); + +#define __put_user_size_allowed(x, ptr, size, retval) \ +do { \ + __label__ __pu_failed; \ + \ + retval = 0; \ + __put_user_size_goto(x, ptr, size, __pu_failed); \ + break; \ + \ +__pu_failed: \ + retval = -EFAULT; \ +} while (0) + +#define __put_user_size(x, ptr, size, retval) \ +do { \ + allow_write_to_user(ptr, size); \ + __put_user_size_allowed(x, ptr, size, retval); \ + prevent_write_to_user(ptr, size); \ +} while (0) + +#define __put_user_nocheck(x, ptr, size) \ +({ \ + long __pu_err; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __typeof__(*(ptr)) __pu_val = (x); \ + __typeof__(size) __pu_size = (size); \ + \ + if (!is_kernel_addr((unsigned long)__pu_addr)) \ + might_fault(); \ + __chk_user_ptr(__pu_addr); \ + __put_user_size(__pu_val, __pu_addr, __pu_size, __pu_err); \ + \ + __pu_err; \ +}) + +#define __put_user_check(x, ptr, size) \ +({ \ + long __pu_err = -EFAULT; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __typeof__(*(ptr)) __pu_val = (x); \ + __typeof__(size) __pu_size = (size); \ + \ + might_fault(); \ + if (access_ok(__pu_addr, __pu_size)) \ + __put_user_size(__pu_val, __pu_addr, __pu_size, __pu_err); \ + \ + __pu_err; \ +}) + +#define __put_user_nosleep(x, ptr, size) \ +({ \ + long __pu_err; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __typeof__(*(ptr)) __pu_val = (x); \ + __typeof__(size) __pu_size = (size); \ + \ + __chk_user_ptr(__pu_addr); \ + __put_user_size(__pu_val, __pu_addr, __pu_size, __pu_err); \ + \ + __pu_err; \ +}) + + +/* + * We don't tell gcc that we are accessing memory, but this is OK + * because we do not write to any memory gcc knows about, so there + * are no aliasing issues. + */ +#define __put_user_asm_goto(x, addr, label, op) \ + asm_volatile_goto( \ + "1: " op "%U1%X1 %0,%1 # put_user\n" \ + EX_TABLE(1b, %l2) \ + : \ + : "r" (x), "m"UPD_CONSTR (*addr) \ + : \ + : label) + +#ifdef __powerpc64__ +#define __put_user_asm2_goto(x, ptr, label) \ + __put_user_asm_goto(x, ptr, label, "std") +#else /* __powerpc64__ */ +#define __put_user_asm2_goto(x, addr, label) \ + asm_volatile_goto( \ + "1: stw%X1 %0, %1\n" \ + "2: stw%X1 %L0, %L1\n" \ + EX_TABLE(1b, %l2) \ + EX_TABLE(2b, %l2) \ + : \ + : "r" (x), "m" (*addr) \ + : \ + : label) +#endif /* __powerpc64__ */ + +#define __put_user_size_goto(x, ptr, size, label) \ +do { \ + switch (size) { \ + case 1: __put_user_asm_goto(x, ptr, label, "stb"); break; \ + case 2: __put_user_asm_goto(x, ptr, label, "sth"); break; \ + case 4: __put_user_asm_goto(x, ptr, label, "stw"); break; \ + case 8: __put_user_asm2_goto(x, ptr, label); break; \ + default: __put_user_bad(); \ + } \ +} while (0) + +#define __put_user_nocheck_goto(x, ptr, size, label) \ +do { \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + __put_user_size_goto((x), __pu_addr, (size), label); \ +} while (0) + + +extern long __get_user_bad(void); + +/* + * This does an atomic 128 byte aligned load from userspace. + * Upto caller to do enable_kernel_vmx() before calling! + */ +#define __get_user_atomic_128_aligned(kaddr, uaddr, err) \ + __asm__ __volatile__( \ + ".machine push\n" \ + ".machine altivec\n" \ + "1: lvx 0,0,%1 # get user\n" \ + " stvx 0,0,%2 # put kernel\n" \ + ".machine pop\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,%3\n" \ + " b 2b\n" \ + ".previous\n" \ + EX_TABLE(1b, 3b) \ + : "=r" (err) \ + : "b" (uaddr), "b" (kaddr), "i" (-EFAULT), "0" (err)) + +#define __get_user_asm(x, addr, err, op) \ + __asm__ __volatile__( \ + "1: "op"%U2%X2 %1, %2 # get_user\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,%3\n" \ + " li %1,0\n" \ + " b 2b\n" \ + ".previous\n" \ + EX_TABLE(1b, 3b) \ + : "=r" (err), "=r" (x) \ + : "m"UPD_CONSTR (*addr), "i" (-EFAULT), "0" (err)) + +#ifdef __powerpc64__ +#define __get_user_asm2(x, addr, err) \ + __get_user_asm(x, addr, err, "ld") +#else /* __powerpc64__ */ +#define __get_user_asm2(x, addr, err) \ + __asm__ __volatile__( \ + "1: lwz%X2 %1, %2\n" \ + "2: lwz%X2 %L1, %L2\n" \ + "3:\n" \ + ".section .fixup,\"ax\"\n" \ + "4: li %0,%3\n" \ + " li %1,0\n" \ + " li %1+1,0\n" \ + " b 3b\n" \ + ".previous\n" \ + EX_TABLE(1b, 4b) \ + EX_TABLE(2b, 4b) \ + : "=r" (err), "=&r" (x) \ + : "m" (*addr), "i" (-EFAULT), "0" (err)) +#endif /* __powerpc64__ */ + +#define __get_user_size_allowed(x, ptr, size, retval) \ +do { \ + retval = 0; \ + __chk_user_ptr(ptr); \ + if (size > sizeof(x)) \ + (x) = __get_user_bad(); \ + switch (size) { \ + case 1: __get_user_asm(x, (u8 __user *)ptr, retval, "lbz"); break; \ + case 2: __get_user_asm(x, (u16 __user *)ptr, retval, "lhz"); break; \ + case 4: __get_user_asm(x, (u32 __user *)ptr, retval, "lwz"); break; \ + case 8: __get_user_asm2(x, (u64 __user *)ptr, retval); break; \ + default: (x) = __get_user_bad(); \ + } \ +} while (0) + +#define __get_user_size(x, ptr, size, retval) \ +do { \ + allow_read_from_user(ptr, size); \ + __get_user_size_allowed(x, ptr, size, retval); \ + prevent_read_from_user(ptr, size); \ +} while (0) + +/* + * This is a type: either unsigned long, if the argument fits into + * that type, or otherwise unsigned long long. + */ +#define __long_type(x) \ + __typeof__(__builtin_choose_expr(sizeof(x) > sizeof(0UL), 0ULL, 0UL)) + +#define __get_user_nocheck(x, ptr, size, do_allow) \ +({ \ + long __gu_err; \ + __long_type(*(ptr)) __gu_val; \ + __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + __typeof__(size) __gu_size = (size); \ + \ + __chk_user_ptr(__gu_addr); \ + if (do_allow && !is_kernel_addr((unsigned long)__gu_addr)) \ + might_fault(); \ + barrier_nospec(); \ + if (do_allow) \ + __get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err); \ + else \ + __get_user_size_allowed(__gu_val, __gu_addr, __gu_size, __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + \ + __gu_err; \ +}) + +#define __get_user_check(x, ptr, size) \ +({ \ + long __gu_err = -EFAULT; \ + __long_type(*(ptr)) __gu_val = 0; \ + __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + __typeof__(size) __gu_size = (size); \ + \ + might_fault(); \ + if (access_ok(__gu_addr, __gu_size)) { \ + barrier_nospec(); \ + __get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err); \ + } \ + (x) = (__force __typeof__(*(ptr)))__gu_val; \ + \ + __gu_err; \ +}) + +#define __get_user_nosleep(x, ptr, size) \ +({ \ + long __gu_err; \ + __long_type(*(ptr)) __gu_val; \ + __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + __typeof__(size) __gu_size = (size); \ + \ + __chk_user_ptr(__gu_addr); \ + barrier_nospec(); \ + __get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err); \ + (x) = (__force __typeof__(*(ptr)))__gu_val; \ + \ + __gu_err; \ +}) + + +/* more complex routines */ + +extern unsigned long __copy_tofrom_user(void __user *to, + const void __user *from, unsigned long size); + +#ifdef CONFIG_ARCH_HAS_COPY_MC +unsigned long __must_check +copy_mc_generic(void *to, const void *from, unsigned long size); + +static inline unsigned long __must_check +copy_mc_to_kernel(void *to, const void *from, unsigned long size) +{ + return copy_mc_generic(to, from, size); +} +#define copy_mc_to_kernel copy_mc_to_kernel + +static inline unsigned long __must_check +copy_mc_to_user(void __user *to, const void *from, unsigned long n) +{ + if (likely(check_copy_size(from, n, true))) { + if (access_ok(to, n)) { + allow_write_to_user(to, n); + n = copy_mc_generic((void *)to, from, n); + prevent_write_to_user(to, n); + } + } + + return n; +} +#endif + +#ifdef __powerpc64__ +static inline unsigned long +raw_copy_in_user(void __user *to, const void __user *from, unsigned long n) +{ + unsigned long ret; + + barrier_nospec(); + allow_read_write_user(to, from, n); + ret = __copy_tofrom_user(to, from, n); + prevent_read_write_user(to, from, n); + return ret; +} +#endif /* __powerpc64__ */ + +static inline unsigned long raw_copy_from_user(void *to, + const void __user *from, unsigned long n) +{ + unsigned long ret; + if (__builtin_constant_p(n) && (n <= 8)) { + ret = 1; + + switch (n) { + case 1: + barrier_nospec(); + __get_user_size(*(u8 *)to, from, 1, ret); + break; + case 2: + barrier_nospec(); + __get_user_size(*(u16 *)to, from, 2, ret); + break; + case 4: + barrier_nospec(); + __get_user_size(*(u32 *)to, from, 4, ret); + break; + case 8: + barrier_nospec(); + __get_user_size(*(u64 *)to, from, 8, ret); + break; + } + if (ret == 0) + return 0; + } + + barrier_nospec(); + allow_read_from_user(from, n); + ret = __copy_tofrom_user((__force void __user *)to, from, n); + prevent_read_from_user(from, n); + return ret; +} + +static inline unsigned long +raw_copy_to_user_allowed(void __user *to, const void *from, unsigned long n) +{ + if (__builtin_constant_p(n) && (n <= 8)) { + unsigned long ret = 1; + + switch (n) { + case 1: + __put_user_size_allowed(*(u8 *)from, (u8 __user *)to, 1, ret); + break; + case 2: + __put_user_size_allowed(*(u16 *)from, (u16 __user *)to, 2, ret); + break; + case 4: + __put_user_size_allowed(*(u32 *)from, (u32 __user *)to, 4, ret); + break; + case 8: + __put_user_size_allowed(*(u64 *)from, (u64 __user *)to, 8, ret); + break; + } + if (ret == 0) + return 0; + } + + return __copy_tofrom_user(to, (__force const void __user *)from, n); +} + +static inline unsigned long +raw_copy_to_user(void __user *to, const void *from, unsigned long n) +{ + unsigned long ret; + + allow_write_to_user(to, n); + ret = raw_copy_to_user_allowed(to, from, n); + prevent_write_to_user(to, n); + return ret; +} + +unsigned long __arch_clear_user(void __user *addr, unsigned long size); + +static inline unsigned long clear_user(void __user *addr, unsigned long size) +{ + unsigned long ret = size; + might_fault(); + if (likely(access_ok(addr, size))) { + allow_write_to_user(addr, size); + ret = __arch_clear_user(addr, size); + prevent_write_to_user(addr, size); + } + return ret; +} + +static inline unsigned long __clear_user(void __user *addr, unsigned long size) +{ + return clear_user(addr, size); +} + +extern long strncpy_from_user(char *dst, const char __user *src, long count); +extern __must_check long strnlen_user(const char __user *str, long n); + +extern long __copy_from_user_flushcache(void *dst, const void __user *src, + unsigned size); +extern void memcpy_page_flushcache(char *to, struct page *page, size_t offset, + size_t len); + +static __must_check inline bool user_access_begin(const void __user *ptr, size_t len) +{ + if (unlikely(!access_ok(ptr, len))) + return false; + + might_fault(); + + allow_read_write_user((void __user *)ptr, ptr, len); + return true; +} +#define user_access_begin user_access_begin +#define user_access_end prevent_current_access_user +#define user_access_save prevent_user_access_return +#define user_access_restore restore_user_access + +static __must_check inline bool +user_read_access_begin(const void __user *ptr, size_t len) +{ + if (unlikely(!access_ok(ptr, len))) + return false; + + might_fault(); + + allow_read_from_user(ptr, len); + return true; +} +#define user_read_access_begin user_read_access_begin +#define user_read_access_end prevent_current_read_from_user + +static __must_check inline bool +user_write_access_begin(const void __user *ptr, size_t len) +{ + if (unlikely(!access_ok(ptr, len))) + return false; + + might_fault(); + + allow_write_to_user((void __user *)ptr, len); + return true; +} +#define user_write_access_begin user_write_access_begin +#define user_write_access_end prevent_current_write_to_user + +#define unsafe_op_wrap(op, err) do { if (unlikely(op)) goto err; } while (0) +#define unsafe_get_user(x, p, e) unsafe_op_wrap(__get_user_allowed(x, p), e) +#define unsafe_put_user(x, p, e) __put_user_goto(x, p, e) + +#define unsafe_copy_to_user(d, s, l, e) \ +do { \ + u8 __user *_dst = (u8 __user *)(d); \ + const u8 *_src = (const u8 *)(s); \ + size_t _len = (l); \ + int _i; \ + \ + for (_i = 0; _i < (_len & ~(sizeof(long) - 1)); _i += sizeof(long)) \ + __put_user_goto(*(long*)(_src + _i), (long __user *)(_dst + _i), e);\ + if (IS_ENABLED(CONFIG_PPC64) && (_len & 4)) { \ + __put_user_goto(*(u32*)(_src + _i), (u32 __user *)(_dst + _i), e); \ + _i += 4; \ + } \ + if (_len & 2) { \ + __put_user_goto(*(u16*)(_src + _i), (u16 __user *)(_dst + _i), e); \ + _i += 2; \ + } \ + if (_len & 1) \ + __put_user_goto(*(u8*)(_src + _i), (u8 __user *)(_dst + _i), e);\ +} while (0) + +#define HAVE_GET_KERNEL_NOFAULT + +#define __get_kernel_nofault(dst, src, type, err_label) \ +do { \ + int __kr_err; \ + \ + __get_user_size_allowed(*((type *)(dst)), (__force type __user *)(src),\ + sizeof(type), __kr_err); \ + if (unlikely(__kr_err)) \ + goto err_label; \ +} while (0) + +#define __put_kernel_nofault(dst, src, type, err_label) \ + __put_user_size_goto(*((type *)(src)), \ + (__force type __user *)(dst), sizeof(type), err_label) + +#endif /* _ARCH_POWERPC_UACCESS_H */ diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h new file mode 100644 index 000000000..0ea9e70ed --- /dev/null +++ b/arch/powerpc/include/asm/udbg.h @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * (c) 2001, 2006 IBM Corporation. + */ + +#ifndef _ASM_POWERPC_UDBG_H +#define _ASM_POWERPC_UDBG_H +#ifdef __KERNEL__ + +#include <linux/compiler.h> +#include <linux/init.h> + +extern void (*udbg_putc)(char c); +extern void (*udbg_flush)(void); +extern int (*udbg_getc)(void); +extern int (*udbg_getc_poll)(void); + +extern void udbg_puts(const char *s); +extern int udbg_write(const char *s, int n); + +extern void register_early_udbg_console(void); +extern void udbg_printf(const char *fmt, ...) + __attribute__ ((format (printf, 1, 2))); +extern void udbg_progress(char *s, unsigned short hex); + +extern void udbg_uart_init_mmio(void __iomem *addr, unsigned int stride); +extern void udbg_uart_init_pio(unsigned long port, unsigned int stride); + +extern void udbg_uart_setup(unsigned int speed, unsigned int clock); +extern unsigned int udbg_probe_uart_speed(unsigned int clock); + +struct device_node; +extern void udbg_scc_init(int force_scc); +extern int udbg_adb_init(int force_btext); +extern void udbg_adb_init_early(void); + +extern void __init udbg_early_init(void); +extern void __init udbg_init_debug_lpar(void); +extern void __init udbg_init_debug_lpar_hvsi(void); +extern void __init udbg_init_pmac_realmode(void); +extern void __init udbg_init_maple_realmode(void); +extern void __init udbg_init_pas_realmode(void); +extern void __init udbg_init_rtas_panel(void); +extern void __init udbg_init_rtas_console(void); +extern void __init udbg_init_debug_beat(void); +extern void __init udbg_init_btext(void); +extern void __init udbg_init_44x_as1(void); +extern void __init udbg_init_40x_realmode(void); +extern void __init udbg_init_cpm(void); +extern void __init udbg_init_usbgecko(void); +extern void __init udbg_init_memcons(void); +extern void __init udbg_init_ehv_bc(void); +extern void __init udbg_init_ps3gelic(void); +extern void __init udbg_init_debug_opal_raw(void); +extern void __init udbg_init_debug_opal_hvsi(void); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_UDBG_H */ diff --git a/arch/powerpc/include/asm/uic.h b/arch/powerpc/include/asm/uic.h new file mode 100644 index 000000000..7b7bd15b1 --- /dev/null +++ b/arch/powerpc/include/asm/uic.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * IBM PPC4xx UIC external definitions and structure. + * + * Maintainer: David Gibson <dwg@au1.ibm.com> + * Copyright 2007 IBM Corporation. + */ +#ifndef _ASM_POWERPC_UIC_H +#define _ASM_POWERPC_UIC_H + +#ifdef __KERNEL__ + +extern void __init uic_init_tree(void); +extern unsigned int uic_get_irq(void); + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_UIC_H */ diff --git a/arch/powerpc/include/asm/ultravisor-api.h b/arch/powerpc/include/asm/ultravisor-api.h new file mode 100644 index 000000000..b66f6db7b --- /dev/null +++ b/arch/powerpc/include/asm/ultravisor-api.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Ultravisor API. + * + * Copyright 2019, IBM Corporation. + * + */ +#ifndef _ASM_POWERPC_ULTRAVISOR_API_H +#define _ASM_POWERPC_ULTRAVISOR_API_H + +#include <asm/hvcall.h> + +/* Return codes */ +#define U_BUSY H_BUSY +#define U_FUNCTION H_FUNCTION +#define U_NOT_AVAILABLE H_NOT_AVAILABLE +#define U_P2 H_P2 +#define U_P3 H_P3 +#define U_P4 H_P4 +#define U_P5 H_P5 +#define U_PARAMETER H_PARAMETER +#define U_PERMISSION H_PERMISSION +#define U_SUCCESS H_SUCCESS + +/* opcodes */ +#define UV_WRITE_PATE 0xF104 +#define UV_RETURN 0xF11C +#define UV_ESM 0xF110 +#define UV_REGISTER_MEM_SLOT 0xF120 +#define UV_UNREGISTER_MEM_SLOT 0xF124 +#define UV_PAGE_IN 0xF128 +#define UV_PAGE_OUT 0xF12C +#define UV_SHARE_PAGE 0xF130 +#define UV_UNSHARE_PAGE 0xF134 +#define UV_UNSHARE_ALL_PAGES 0xF140 +#define UV_PAGE_INVAL 0xF138 +#define UV_SVM_TERMINATE 0xF13C + +#endif /* _ASM_POWERPC_ULTRAVISOR_API_H */ diff --git a/arch/powerpc/include/asm/ultravisor.h b/arch/powerpc/include/asm/ultravisor.h new file mode 100644 index 000000000..790b0e636 --- /dev/null +++ b/arch/powerpc/include/asm/ultravisor.h @@ -0,0 +1,85 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Ultravisor definitions + * + * Copyright 2019, IBM Corporation. + * + */ +#ifndef _ASM_POWERPC_ULTRAVISOR_H +#define _ASM_POWERPC_ULTRAVISOR_H + +#include <asm/asm-prototypes.h> +#include <asm/ultravisor-api.h> +#include <asm/firmware.h> + +int early_init_dt_scan_ultravisor(unsigned long node, const char *uname, + int depth, void *data); + +/* + * In ultravisor enabled systems, PTCR becomes ultravisor privileged only for + * writing and an attempt to write to it will cause a Hypervisor Emulation + * Assistance interrupt. + */ +static inline void set_ptcr_when_no_uv(u64 val) +{ + if (!firmware_has_feature(FW_FEATURE_ULTRAVISOR)) + mtspr(SPRN_PTCR, val); +} + +static inline int uv_register_pate(u64 lpid, u64 dw0, u64 dw1) +{ + return ucall_norets(UV_WRITE_PATE, lpid, dw0, dw1); +} + +static inline int uv_share_page(u64 pfn, u64 npages) +{ + return ucall_norets(UV_SHARE_PAGE, pfn, npages); +} + +static inline int uv_unshare_page(u64 pfn, u64 npages) +{ + return ucall_norets(UV_UNSHARE_PAGE, pfn, npages); +} + +static inline int uv_unshare_all_pages(void) +{ + return ucall_norets(UV_UNSHARE_ALL_PAGES); +} + +static inline int uv_page_in(u64 lpid, u64 src_ra, u64 dst_gpa, u64 flags, + u64 page_shift) +{ + return ucall_norets(UV_PAGE_IN, lpid, src_ra, dst_gpa, flags, + page_shift); +} + +static inline int uv_page_out(u64 lpid, u64 dst_ra, u64 src_gpa, u64 flags, + u64 page_shift) +{ + return ucall_norets(UV_PAGE_OUT, lpid, dst_ra, src_gpa, flags, + page_shift); +} + +static inline int uv_register_mem_slot(u64 lpid, u64 start_gpa, u64 size, + u64 flags, u64 slotid) +{ + return ucall_norets(UV_REGISTER_MEM_SLOT, lpid, start_gpa, + size, flags, slotid); +} + +static inline int uv_unregister_mem_slot(u64 lpid, u64 slotid) +{ + return ucall_norets(UV_UNREGISTER_MEM_SLOT, lpid, slotid); +} + +static inline int uv_page_inval(u64 lpid, u64 gpa, u64 page_shift) +{ + return ucall_norets(UV_PAGE_INVAL, lpid, gpa, page_shift); +} + +static inline int uv_svm_terminate(u64 lpid) +{ + return ucall_norets(UV_SVM_TERMINATE, lpid); +} + +#endif /* _ASM_POWERPC_ULTRAVISOR_H */ diff --git a/arch/powerpc/include/asm/unaligned.h b/arch/powerpc/include/asm/unaligned.h new file mode 100644 index 000000000..ce69c5eff --- /dev/null +++ b/arch/powerpc/include/asm/unaligned.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_UNALIGNED_H +#define _ASM_POWERPC_UNALIGNED_H + +#ifdef __KERNEL__ + +/* + * The PowerPC can do unaligned accesses itself based on its endian mode. + */ +#include <linux/unaligned/access_ok.h> +#include <linux/unaligned/generic.h> + +#ifdef __LITTLE_ENDIAN__ +#define get_unaligned __get_unaligned_le +#define put_unaligned __put_unaligned_le +#else +#define get_unaligned __get_unaligned_be +#define put_unaligned __put_unaligned_be +#endif + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_UNALIGNED_H */ diff --git a/arch/powerpc/include/asm/uninorth.h b/arch/powerpc/include/asm/uninorth.h new file mode 100644 index 000000000..e278299b9 --- /dev/null +++ b/arch/powerpc/include/asm/uninorth.h @@ -0,0 +1,230 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * uninorth.h: definitions for using the "UniNorth" host bridge chip + * from Apple. This chip is used on "Core99" machines + * This also includes U2 used on more recent MacRISC2/3 + * machines and U3 (G5) + * + */ +#ifdef __KERNEL__ +#ifndef __ASM_UNINORTH_H__ +#define __ASM_UNINORTH_H__ + +/* + * Uni-N and U3 config space reg. definitions + * + * (Little endian) + */ + +/* Address ranges selection. This one should work with Bandit too */ +/* Not U3 */ +#define UNI_N_ADDR_SELECT 0x48 +#define UNI_N_ADDR_COARSE_MASK 0xffff0000 /* 256Mb regions at *0000000 */ +#define UNI_N_ADDR_FINE_MASK 0x0000ffff /* 16Mb regions at f*000000 */ + +/* AGP registers */ +/* Not U3 */ +#define UNI_N_CFG_GART_BASE 0x8c +#define UNI_N_CFG_AGP_BASE 0x90 +#define UNI_N_CFG_GART_CTRL 0x94 +#define UNI_N_CFG_INTERNAL_STATUS 0x98 +#define UNI_N_CFG_GART_DUMMY_PAGE 0xa4 + +/* UNI_N_CFG_GART_CTRL bits definitions */ +#define UNI_N_CFG_GART_INVAL 0x00000001 +#define UNI_N_CFG_GART_ENABLE 0x00000100 +#define UNI_N_CFG_GART_2xRESET 0x00010000 +#define UNI_N_CFG_GART_DISSBADET 0x00020000 +/* The following seems to only be used only on U3 <j.glisse@gmail.com> */ +#define U3_N_CFG_GART_SYNCMODE 0x00040000 +#define U3_N_CFG_GART_PERFRD 0x00080000 +#define U3_N_CFG_GART_B2BGNT 0x00200000 +#define U3_N_CFG_GART_FASTDDR 0x00400000 + +/* My understanding of UniNorth AGP as of UniNorth rev 1.0x, + * revision 1.5 (x4 AGP) may need further changes. + * + * AGP_BASE register contains the base address of the AGP aperture on + * the AGP bus. It doesn't seem to be visible to the CPU as of UniNorth 1.x, + * even if decoding of this address range is enabled in the address select + * register. Apparently, the only supported bases are 256Mb multiples + * (high 4 bits of that register). + * + * GART_BASE register appear to contain the physical address of the GART + * in system memory in the high address bits (page aligned), and the + * GART size in the low order bits (number of GART pages) + * + * The GART format itself is one 32bits word per physical memory page. + * This word contains, in little-endian format (!!!), the physical address + * of the page in the high bits, and what appears to be an "enable" bit + * in the LSB bit (0) that must be set to 1 when the entry is valid. + * + * Obviously, the GART is not cache coherent and so any change to it + * must be flushed to memory (or maybe just make the GART space non + * cachable). AGP memory itself doesn't seem to be cache coherent neither. + * + * In order to invalidate the GART (which is probably necessary to inval + * the bridge internal TLBs), the following sequence has to be written, + * in order, to the GART_CTRL register: + * + * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL + * UNI_N_CFG_GART_ENABLE + * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_2xRESET + * UNI_N_CFG_GART_ENABLE + * + * As far as AGP "features" are concerned, it looks like fast write may + * not be supported but this has to be confirmed. + * + * Turning on AGP seem to require a double invalidate operation, one before + * setting the AGP command register, on after. + * + * Turning off AGP seems to require the following sequence: first wait + * for the AGP to be idle by reading the internal status register, then + * write in that order to the GART_CTRL register: + * + * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL + * 0 + * UNI_N_CFG_GART_2xRESET + * 0 + */ + +/* + * Uni-N memory mapped reg. definitions + * + * Those registers are Big-Endian !! + * + * Their meaning come from either Darwin and/or from experiments I made with + * the bootrom, I'm not sure about their exact meaning yet + * + */ + +/* Version of the UniNorth chip */ +#define UNI_N_VERSION 0x0000 /* Known versions: 3,7 and 8 */ + +#define UNI_N_VERSION_107 0x0003 /* 1.0.7 */ +#define UNI_N_VERSION_10A 0x0007 /* 1.0.10 */ +#define UNI_N_VERSION_150 0x0011 /* 1.5 */ +#define UNI_N_VERSION_200 0x0024 /* 2.0 */ +#define UNI_N_VERSION_PANGEA 0x00C0 /* Integrated U1 + K */ +#define UNI_N_VERSION_INTREPID 0x00D2 /* Integrated U2 + K */ +#define UNI_N_VERSION_300 0x0030 /* 3.0 (U3 on G5) */ + +/* This register is used to enable/disable various clocks */ +#define UNI_N_CLOCK_CNTL 0x0020 +#define UNI_N_CLOCK_CNTL_PCI 0x00000001 /* PCI2 clock control */ +#define UNI_N_CLOCK_CNTL_GMAC 0x00000002 /* GMAC clock control */ +#define UNI_N_CLOCK_CNTL_FW 0x00000004 /* FireWire clock control */ +#define UNI_N_CLOCK_CNTL_ATA100 0x00000010 /* ATA-100 clock control (U2) */ + +/* Power Management control */ +#define UNI_N_POWER_MGT 0x0030 +#define UNI_N_POWER_MGT_NORMAL 0x00 +#define UNI_N_POWER_MGT_IDLE2 0x01 +#define UNI_N_POWER_MGT_SLEEP 0x02 + +/* This register is configured by Darwin depending on the UniN + * revision + */ +#define UNI_N_ARB_CTRL 0x0040 +#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT 15 +#define UNI_N_ARB_CTRL_QACK_DELAY_MASK 0x0e1f8000 +#define UNI_N_ARB_CTRL_QACK_DELAY 0x30 +#define UNI_N_ARB_CTRL_QACK_DELAY105 0x00 + +/* This one _might_ return the CPU number of the CPU reading it; + * the bootROM decides whether to boot or to sleep/spinloop depending + * on this register being 0 or not + */ +#define UNI_N_CPU_NUMBER 0x0050 + +/* This register appear to be read by the bootROM to decide what + * to do on a non-recoverable reset (powerup or wakeup) + */ +#define UNI_N_HWINIT_STATE 0x0070 +#define UNI_N_HWINIT_STATE_SLEEPING 0x01 +#define UNI_N_HWINIT_STATE_RUNNING 0x02 +/* This last bit appear to be used by the bootROM to know the second + * CPU has started and will enter it's sleep loop with IP=0 + */ +#define UNI_N_HWINIT_STATE_CPU1_FLAG 0x10000000 + +/* This register controls AACK delay, which is set when 2004 iBook/PowerBook + * is in low speed mode. + */ +#define UNI_N_AACK_DELAY 0x0100 +#define UNI_N_AACK_DELAY_ENABLE 0x00000001 + +/* Clock status for Intrepid */ +#define UNI_N_CLOCK_STOP_STATUS0 0x0150 +#define UNI_N_CLOCK_STOPPED_EXTAGP 0x00200000 +#define UNI_N_CLOCK_STOPPED_AGPDEL 0x00100000 +#define UNI_N_CLOCK_STOPPED_I2S0_45_49 0x00080000 +#define UNI_N_CLOCK_STOPPED_I2S0_18 0x00040000 +#define UNI_N_CLOCK_STOPPED_I2S1_45_49 0x00020000 +#define UNI_N_CLOCK_STOPPED_I2S1_18 0x00010000 +#define UNI_N_CLOCK_STOPPED_TIMER 0x00008000 +#define UNI_N_CLOCK_STOPPED_SCC_RTCLK18 0x00004000 +#define UNI_N_CLOCK_STOPPED_SCC_RTCLK32 0x00002000 +#define UNI_N_CLOCK_STOPPED_SCC_VIA32 0x00001000 +#define UNI_N_CLOCK_STOPPED_SCC_SLOT0 0x00000800 +#define UNI_N_CLOCK_STOPPED_SCC_SLOT1 0x00000400 +#define UNI_N_CLOCK_STOPPED_SCC_SLOT2 0x00000200 +#define UNI_N_CLOCK_STOPPED_PCI_FBCLKO 0x00000100 +#define UNI_N_CLOCK_STOPPED_VEO0 0x00000080 +#define UNI_N_CLOCK_STOPPED_VEO1 0x00000040 +#define UNI_N_CLOCK_STOPPED_USB0 0x00000020 +#define UNI_N_CLOCK_STOPPED_USB1 0x00000010 +#define UNI_N_CLOCK_STOPPED_USB2 0x00000008 +#define UNI_N_CLOCK_STOPPED_32 0x00000004 +#define UNI_N_CLOCK_STOPPED_45 0x00000002 +#define UNI_N_CLOCK_STOPPED_49 0x00000001 + +#define UNI_N_CLOCK_STOP_STATUS1 0x0160 +#define UNI_N_CLOCK_STOPPED_PLL4REF 0x00080000 +#define UNI_N_CLOCK_STOPPED_CPUDEL 0x00040000 +#define UNI_N_CLOCK_STOPPED_CPU 0x00020000 +#define UNI_N_CLOCK_STOPPED_BUF_REFCKO 0x00010000 +#define UNI_N_CLOCK_STOPPED_PCI2 0x00008000 +#define UNI_N_CLOCK_STOPPED_FW 0x00004000 +#define UNI_N_CLOCK_STOPPED_GB 0x00002000 +#define UNI_N_CLOCK_STOPPED_ATA66 0x00001000 +#define UNI_N_CLOCK_STOPPED_ATA100 0x00000800 +#define UNI_N_CLOCK_STOPPED_MAX 0x00000400 +#define UNI_N_CLOCK_STOPPED_PCI1 0x00000200 +#define UNI_N_CLOCK_STOPPED_KLPCI 0x00000100 +#define UNI_N_CLOCK_STOPPED_USB0PCI 0x00000080 +#define UNI_N_CLOCK_STOPPED_USB1PCI 0x00000040 +#define UNI_N_CLOCK_STOPPED_USB2PCI 0x00000020 +#define UNI_N_CLOCK_STOPPED_7PCI1 0x00000008 +#define UNI_N_CLOCK_STOPPED_AGP 0x00000004 +#define UNI_N_CLOCK_STOPPED_PCI0 0x00000002 +#define UNI_N_CLOCK_STOPPED_18 0x00000001 + +/* Intrepid registe to OF do-platform-clockspreading */ +#define UNI_N_CLOCK_SPREADING 0x190 + +/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */ + + +/* + * U3 specific registers + */ + + +/* U3 Toggle */ +#define U3_TOGGLE_REG 0x00e0 +#define U3_PMC_START_STOP 0x0001 +#define U3_MPIC_RESET 0x0002 +#define U3_MPIC_OUTPUT_ENABLE 0x0004 + +/* U3 API PHY Config 1 */ +#define U3_API_PHY_CONFIG_1 0x23030 + +/* U3 HyperTransport registers */ +#define U3_HT_CONFIG_BASE 0x70000 +#define U3_HT_LINK_COMMAND 0x100 +#define U3_HT_LINK_CONFIG 0x110 +#define U3_HT_LINK_FREQ 0x120 + +#endif /* __ASM_UNINORTH_H__ */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h new file mode 100644 index 000000000..700fcdac2 --- /dev/null +++ b/arch/powerpc/include/asm/unistd.h @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * This file contains the system call numbers. + */ +#ifndef _ASM_POWERPC_UNISTD_H_ +#define _ASM_POWERPC_UNISTD_H_ + +#include <uapi/asm/unistd.h> + +#define NR_syscalls __NR_syscalls + +#define __NR__exit __NR_exit + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> +#include <linux/compiler.h> +#include <linux/linkage.h> + +#define __ARCH_WANT_NEW_STAT +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_IPC +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME32 +#define __ARCH_WANT_SYS_UTIME32 +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLD_UNAME +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#ifdef CONFIG_PPC32 +#define __ARCH_WANT_OLD_STAT +#endif +#ifdef CONFIG_PPC64 +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_NEWFSTATAT +#define __ARCH_WANT_COMPAT_SYS_SENDFILE +#endif +#define __ARCH_WANT_SYS_FORK +#define __ARCH_WANT_SYS_VFORK +#define __ARCH_WANT_SYS_CLONE +#define __ARCH_WANT_SYS_CLONE3 + +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_POWERPC_UNISTD_H_ */ diff --git a/arch/powerpc/include/asm/uprobes.h b/arch/powerpc/include/asm/uprobes.h new file mode 100644 index 000000000..5bf65f5d4 --- /dev/null +++ b/arch/powerpc/include/asm/uprobes.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _ASM_UPROBES_H +#define _ASM_UPROBES_H +/* + * User-space Probes (UProbes) for powerpc + * + * Copyright IBM Corporation, 2007-2012 + * + * Adapted from the x86 port by Ananth N Mavinakayanahalli <ananth@in.ibm.com> + */ + +#include <linux/notifier.h> +#include <asm/probes.h> +#include <asm/inst.h> + +typedef ppc_opcode_t uprobe_opcode_t; + +#define MAX_UINSN_BYTES 8 +#define UPROBE_XOL_SLOT_BYTES (MAX_UINSN_BYTES) + +/* The following alias is needed for reference from arch-agnostic code */ +#define UPROBE_SWBP_INSN BREAKPOINT_INSTRUCTION +#define UPROBE_SWBP_INSN_SIZE 4 /* swbp insn size in bytes */ + +struct arch_uprobe { + union { + struct ppc_inst insn; + struct ppc_inst ixol; + }; +}; + +struct arch_uprobe_task { + unsigned long saved_trap_nr; +}; + +#endif /* _ASM_UPROBES_H */ diff --git a/arch/powerpc/include/asm/user.h b/arch/powerpc/include/asm/user.h new file mode 100644 index 000000000..99443b859 --- /dev/null +++ b/arch/powerpc/include/asm/user.h @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_USER_H +#define _ASM_POWERPC_USER_H + +#include <asm/ptrace.h> +#include <asm/page.h> + +/* + * Adapted from <asm-alpha/user.h> + * + * Core file format: The core file is written in such a way that gdb + * can understand it and provide useful information to the user (under + * linux we use the `trad-core' bfd, NOT the osf-core). The file contents + * are as follows: + * + * upage: 1 page consisting of a user struct that tells gdb + * what is present in the file. Directly after this is a + * copy of the task_struct, which is currently not used by gdb, + * but it may come in handy at some point. All of the registers + * are stored as part of the upage. The upage should always be + * only one page long. + * data: The data segment follows next. We use current->end_text to + * current->brk to pick up all of the user variables, plus any memory + * that may have been sbrk'ed. No attempt is made to determine if a + * page is demand-zero or if a page is totally unused, we just cover + * the entire range. All of the addresses are rounded in such a way + * that an integral number of pages is written. + * stack: We need the stack information in order to get a meaningful + * backtrace. We need to write the data from usp to + * current->start_stack, so we round each of these in order to be able + * to write an integer number of pages. + */ +struct user { + struct user_pt_regs regs; /* entire machine state */ + size_t u_tsize; /* text size (pages) */ + size_t u_dsize; /* data size (pages) */ + size_t u_ssize; /* stack size (pages) */ + unsigned long start_code; /* text starting address */ + unsigned long start_data; /* data starting address */ + unsigned long start_stack; /* stack starting address */ + long int signal; /* signal causing core dump */ + unsigned long u_ar0; /* help gdb find registers */ + unsigned long magic; /* identifies a core file */ + char u_comm[32]; /* user command name */ +}; + +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_DATA_START_ADDR (u.start_data) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) +#endif /* _ASM_POWERPC_USER_H */ diff --git a/arch/powerpc/include/asm/vas.h b/arch/powerpc/include/asm/vas.h new file mode 100644 index 000000000..47062b457 --- /dev/null +++ b/arch/powerpc/include/asm/vas.h @@ -0,0 +1,177 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2016-17 IBM Corp. + */ + +#ifndef _ASM_POWERPC_VAS_H +#define _ASM_POWERPC_VAS_H + +struct vas_window; + +/* + * Min and max FIFO sizes are based on Version 1.05 Section 3.1.4.25 + * (Local FIFO Size Register) of the VAS workbook. + */ +#define VAS_RX_FIFO_SIZE_MIN (1 << 10) /* 1KB */ +#define VAS_RX_FIFO_SIZE_MAX (8 << 20) /* 8MB */ + +/* + * Threshold Control Mode: Have paste operation fail if the number of + * requests in receive FIFO exceeds a threshold. + * + * NOTE: No special error code yet if paste is rejected because of these + * limits. So users can't distinguish between this and other errors. + */ +#define VAS_THRESH_DISABLED 0 +#define VAS_THRESH_FIFO_GT_HALF_FULL 1 +#define VAS_THRESH_FIFO_GT_QTR_FULL 2 +#define VAS_THRESH_FIFO_GT_EIGHTH_FULL 3 + +/* + * Get/Set bit fields + */ +#define GET_FIELD(m, v) (((v) & (m)) >> MASK_LSH(m)) +#define MASK_LSH(m) (__builtin_ffsl(m) - 1) +#define SET_FIELD(m, v, val) \ + (((v) & ~(m)) | ((((typeof(v))(val)) << MASK_LSH(m)) & (m))) + +/* + * Co-processor Engine type. + */ +enum vas_cop_type { + VAS_COP_TYPE_FAULT, + VAS_COP_TYPE_842, + VAS_COP_TYPE_842_HIPRI, + VAS_COP_TYPE_GZIP, + VAS_COP_TYPE_GZIP_HIPRI, + VAS_COP_TYPE_FTW, + VAS_COP_TYPE_MAX, +}; + +/* + * Receive window attributes specified by the (in-kernel) owner of window. + */ +struct vas_rx_win_attr { + u64 rx_fifo; + int rx_fifo_size; + int wcreds_max; + + bool pin_win; + bool rej_no_credit; + bool tx_wcred_mode; + bool rx_wcred_mode; + bool tx_win_ord_mode; + bool rx_win_ord_mode; + bool data_stamp; + bool nx_win; + bool fault_win; + bool user_win; + bool notify_disable; + bool intr_disable; + bool notify_early; + + int lnotify_lpid; + int lnotify_pid; + int lnotify_tid; + u32 pswid; + + int tc_mode; +}; + +/* + * Window attributes specified by the in-kernel owner of a send window. + */ +struct vas_tx_win_attr { + enum vas_cop_type cop; + int wcreds_max; + int lpid; + int pidr; /* hardware PID (from SPRN_PID) */ + int pswid; + int rsvd_txbuf_count; + int tc_mode; + + bool user_win; + bool pin_win; + bool rej_no_credit; + bool rsvd_txbuf_enable; + bool tx_wcred_mode; + bool rx_wcred_mode; + bool tx_win_ord_mode; + bool rx_win_ord_mode; +}; + +/* + * Helper to map a chip id to VAS id. + * For POWER9, this is a 1:1 mapping. In the future this maybe a 1:N + * mapping in which case, we will need to update this helper. + * + * Return the VAS id or -1 if no matching vasid is found. + */ +int chip_to_vas_id(int chipid); + +/* + * Helper to initialize receive window attributes to defaults for an + * NX window. + */ +void vas_init_rx_win_attr(struct vas_rx_win_attr *rxattr, enum vas_cop_type cop); + +/* + * Open a VAS receive window for the instance of VAS identified by @vasid + * Use @attr to initialize the attributes of the window. + * + * Return a handle to the window or ERR_PTR() on error. + */ +struct vas_window *vas_rx_win_open(int vasid, enum vas_cop_type cop, + struct vas_rx_win_attr *attr); + +/* + * Helper to initialize send window attributes to defaults for an NX window. + */ +extern void vas_init_tx_win_attr(struct vas_tx_win_attr *txattr, + enum vas_cop_type cop); + +/* + * Open a VAS send window for the instance of VAS identified by @vasid + * and the co-processor type @cop. Use @attr to initialize attributes + * of the window. + * + * Note: The instance of VAS must already have an open receive window for + * the coprocessor type @cop. + * + * Return a handle to the send window or ERR_PTR() on error. + */ +struct vas_window *vas_tx_win_open(int vasid, enum vas_cop_type cop, + struct vas_tx_win_attr *attr); + +/* + * Close the send or receive window identified by @win. For receive windows + * return -EAGAIN if there are active send windows attached to this receive + * window. + */ +int vas_win_close(struct vas_window *win); + +/* + * Copy the co-processor request block (CRB) @crb into the local L2 cache. + */ +int vas_copy_crb(void *crb, int offset); + +/* + * Paste a previously copied CRB (see vas_copy_crb()) from the L2 cache to + * the hardware address associated with the window @win. @re is expected/ + * assumed to be true for NX windows. + */ +int vas_paste_crb(struct vas_window *win, int offset, bool re); + +/* + * Register / unregister coprocessor type to VAS API which will be exported + * to user space. Applications can use this API to open / close window + * which can be used to send / receive requests directly to cooprcessor. + * + * Only NX GZIP coprocessor type is supported now, but this API can be + * used for others in future. + */ +int vas_register_coproc_api(struct module *mod, enum vas_cop_type cop_type, + const char *name); +void vas_unregister_coproc_api(void); + +#endif /* __ASM_POWERPC_VAS_H */ diff --git a/arch/powerpc/include/asm/vdso.h b/arch/powerpc/include/asm/vdso.h new file mode 100644 index 000000000..2ff884853 --- /dev/null +++ b/arch/powerpc/include/asm/vdso.h @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __PPC64_VDSO_H__ +#define __PPC64_VDSO_H__ + +#ifdef __KERNEL__ + +/* Default link addresses for the vDSOs */ +#define VDSO32_LBASE 0x0 +#define VDSO64_LBASE 0x0 + +/* Default map addresses for 32bit vDSO */ +#define VDSO32_MBASE 0x100000 + +#define VDSO_VERSION_STRING LINUX_2.6.15 + +#ifndef __ASSEMBLY__ + +/* Offsets relative to thread->vdso_base */ +extern unsigned long vdso64_rt_sigtramp; +extern unsigned long vdso32_sigtramp; +extern unsigned long vdso32_rt_sigtramp; + +int vdso_getcpu_init(void); + +#else /* __ASSEMBLY__ */ + +#ifdef __VDSO64__ +#define V_FUNCTION_BEGIN(name) \ + .globl name; \ + name: \ + +#define V_FUNCTION_END(name) \ + .size name,.-name; + +#define V_LOCAL_FUNC(name) (name) +#endif /* __VDSO64__ */ + +#ifdef __VDSO32__ + +#define V_FUNCTION_BEGIN(name) \ + .globl name; \ + .type name,@function; \ + name: \ + +#define V_FUNCTION_END(name) \ + .size name,.-name; + +#define V_LOCAL_FUNC(name) (name) + +#endif /* __VDSO32__ */ + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* __PPC64_VDSO_H__ */ diff --git a/arch/powerpc/include/asm/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h new file mode 100644 index 000000000..b9ef6cf50 --- /dev/null +++ b/arch/powerpc/include/asm/vdso_datapage.h @@ -0,0 +1,130 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _VDSO_DATAPAGE_H +#define _VDSO_DATAPAGE_H +#ifdef __KERNEL__ + +/* + * Copyright (C) 2002 Peter Bergner <bergner@vnet.ibm.com>, IBM + * Copyright (C) 2005 Benjamin Herrenschmidy <benh@kernel.crashing.org>, + * IBM Corp. + */ + + +/* + * Note about this structure: + * + * This structure was historically called systemcfg and exposed to + * userland via /proc/ppc64/systemcfg. Unfortunately, this became an + * ABI issue as some proprietary software started relying on being able + * to mmap() it, thus we have to keep the base layout at least for a + * few kernel versions. + * + * However, since ppc32 doesn't suffer from this backward handicap, + * a simpler version of the data structure is used there with only the + * fields actually used by the vDSO. + * + */ + +/* + * If the major version changes we are incompatible. + * Minor version changes are a hint. + */ +#define SYSTEMCFG_MAJOR 1 +#define SYSTEMCFG_MINOR 1 + +#ifndef __ASSEMBLY__ + +#include <linux/unistd.h> +#include <linux/time.h> + +#define SYSCALL_MAP_SIZE ((NR_syscalls + 31) / 32) + +/* + * So here is the ppc64 backward compatible version + */ + +#ifdef CONFIG_PPC64 + +struct vdso_data { + __u8 eye_catcher[16]; /* Eyecatcher: SYSTEMCFG:PPC64 0x00 */ + struct { /* Systemcfg version numbers */ + __u32 major; /* Major number 0x10 */ + __u32 minor; /* Minor number 0x14 */ + } version; + + /* Note about the platform flags: it now only contains the lpar + * bit. The actual platform number is dead and buried + */ + __u32 platform; /* Platform flags 0x18 */ + __u32 processor; /* Processor type 0x1C */ + __u64 processorCount; /* # of physical processors 0x20 */ + __u64 physicalMemorySize; /* Size of real memory(B) 0x28 */ + __u64 tb_orig_stamp; /* Timebase at boot 0x30 */ + __u64 tb_ticks_per_sec; /* Timebase tics / sec 0x38 */ + __u64 tb_to_xs; /* Inverse of TB to 2^20 0x40 */ + __u64 stamp_xsec; /* 0x48 */ + __u64 tb_update_count; /* Timebase atomicity ctr 0x50 */ + __u32 tz_minuteswest; /* Minutes west of Greenwich 0x58 */ + __u32 tz_dsttime; /* Type of dst correction 0x5C */ + __u32 dcache_size; /* L1 d-cache size 0x60 */ + __u32 dcache_line_size; /* L1 d-cache line size 0x64 */ + __u32 icache_size; /* L1 i-cache size 0x68 */ + __u32 icache_line_size; /* L1 i-cache line size 0x6C */ + + /* those additional ones don't have to be located anywhere + * special as they were not part of the original systemcfg + */ + __u32 dcache_block_size; /* L1 d-cache block size */ + __u32 icache_block_size; /* L1 i-cache block size */ + __u32 dcache_log_block_size; /* L1 d-cache log block size */ + __u32 icache_log_block_size; /* L1 i-cache log block size */ + __u32 stamp_sec_fraction; /* fractional seconds of stamp_xtime */ + __s32 wtom_clock_nsec; /* Wall to monotonic clock nsec */ + __s64 wtom_clock_sec; /* Wall to monotonic clock sec */ + __s64 stamp_xtime_sec; /* xtime secs as at tb_orig_stamp */ + __s64 stamp_xtime_nsec; /* xtime nsecs as at tb_orig_stamp */ + __u32 hrtimer_res; /* hrtimer resolution */ + __u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of syscalls */ + __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */ +}; + +#else /* CONFIG_PPC64 */ + +/* + * And here is the simpler 32 bits version + */ +struct vdso_data { + __u64 tb_orig_stamp; /* Timebase at boot 0x30 */ + __u64 tb_ticks_per_sec; /* Timebase tics / sec 0x38 */ + __u64 tb_to_xs; /* Inverse of TB to 2^20 0x40 */ + __u64 stamp_xsec; /* 0x48 */ + __u32 tb_update_count; /* Timebase atomicity ctr 0x50 */ + __u32 tz_minuteswest; /* Minutes west of Greenwich 0x58 */ + __u32 tz_dsttime; /* Type of dst correction 0x5C */ + __s32 wtom_clock_sec; /* Wall to monotonic clock */ + __s32 wtom_clock_nsec; + __s32 stamp_xtime_sec; /* xtime seconds as at tb_orig_stamp */ + __s32 stamp_xtime_nsec; /* xtime nsecs as at tb_orig_stamp */ + __u32 stamp_sec_fraction; /* fractional seconds of stamp_xtime */ + __u32 hrtimer_res; /* hrtimer resolution */ + __u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */ +}; + +#endif /* CONFIG_PPC64 */ + +extern struct vdso_data *vdso_data; + +#else /* __ASSEMBLY__ */ + +.macro get_datapage ptr, tmp + bcl 20, 31, .+4 + mflr \ptr + addi \ptr, \ptr, (__kernel_datapage_offset - (.-4))@l + lwz \tmp, 0(\ptr) + add \ptr, \tmp, \ptr +.endm + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ +#endif /* _SYSTEMCFG_H */ diff --git a/arch/powerpc/include/asm/vermagic.h b/arch/powerpc/include/asm/vermagic.h new file mode 100644 index 000000000..b054a8576 --- /dev/null +++ b/arch/powerpc/include/asm/vermagic.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_VERMAGIC_H +#define _ASM_VERMAGIC_H + +#ifdef CONFIG_MPROFILE_KERNEL +#define MODULE_ARCH_VERMAGIC_FTRACE "mprofile-kernel " +#else +#define MODULE_ARCH_VERMAGIC_FTRACE "" +#endif + +#ifdef CONFIG_RELOCATABLE +#define MODULE_ARCH_VERMAGIC_RELOCATABLE "relocatable " +#else +#define MODULE_ARCH_VERMAGIC_RELOCATABLE "" +#endif + +#define MODULE_ARCH_VERMAGIC \ + MODULE_ARCH_VERMAGIC_FTRACE MODULE_ARCH_VERMAGIC_RELOCATABLE + +#endif /* _ASM_VERMAGIC_H */ diff --git a/arch/powerpc/include/asm/vga.h b/arch/powerpc/include/asm/vga.h new file mode 100644 index 000000000..fcf721682 --- /dev/null +++ b/arch/powerpc/include/asm/vga.h @@ -0,0 +1,60 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_VGA_H_ +#define _ASM_POWERPC_VGA_H_ + +#ifdef __KERNEL__ + +/* + * Access to VGA videoram + * + * (c) 1998 Martin Mares <mj@ucw.cz> + */ + + +#include <asm/io.h> + + +#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_MDA_CONSOLE) + +#define VT_BUF_HAVE_RW +/* + * These are only needed for supporting VGA or MDA text mode, which use little + * endian byte ordering. + * In other cases, we can optimize by using native byte ordering and + * <linux/vt_buffer.h> has already done the right job for us. + */ + +static inline void scr_writew(u16 val, volatile u16 *addr) +{ + *addr = cpu_to_le16(val); +} + +static inline u16 scr_readw(volatile const u16 *addr) +{ + return le16_to_cpu(*addr); +} + +#define VT_BUF_HAVE_MEMSETW +static inline void scr_memsetw(u16 *s, u16 v, unsigned int n) +{ + memset16(s, cpu_to_le16(v), n / 2); +} + +#define VT_BUF_HAVE_MEMCPYW +#define VT_BUF_HAVE_MEMMOVEW +#define scr_memcpyw memcpy +#define scr_memmovew memmove + +#endif /* !CONFIG_VGA_CONSOLE && !CONFIG_MDA_CONSOLE */ + +#ifdef __powerpc64__ +#define VGA_MAP_MEM(x,s) ((unsigned long) ioremap((x), s)) +#else +#define VGA_MAP_MEM(x,s) (x) +#endif + +#define vga_readb(x) (*(x)) +#define vga_writeb(x,y) (*(y) = (x)) + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_VGA_H_ */ diff --git a/arch/powerpc/include/asm/vio.h b/arch/powerpc/include/asm/vio.h new file mode 100644 index 000000000..0cf527465 --- /dev/null +++ b/arch/powerpc/include/asm/vio.h @@ -0,0 +1,169 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * IBM PowerPC Virtual I/O Infrastructure Support. + * + * Copyright (c) 2003 IBM Corp. + * Dave Engebretsen engebret@us.ibm.com + * Santiago Leon santil@us.ibm.com + */ + +#ifndef _ASM_POWERPC_VIO_H +#define _ASM_POWERPC_VIO_H +#ifdef __KERNEL__ + +#include <linux/errno.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/mod_devicetable.h> +#include <linux/scatterlist.h> + +#include <asm/hvcall.h> + +/* + * Architecture-specific constants for drivers to + * extract attributes of the device using vio_get_attribute() + */ +#define VETH_MAC_ADDR "local-mac-address" +#define VETH_MCAST_FILTER_SIZE "ibm,mac-address-filters" + +/* End architecture-specific constants */ + +#define h_vio_signal(ua, mode) \ + plpar_hcall_norets(H_VIO_SIGNAL, ua, mode) + +#define VIO_IRQ_DISABLE 0UL +#define VIO_IRQ_ENABLE 1UL + +/* + * VIO CMO minimum entitlement for all devices and spare entitlement + */ +#define VIO_CMO_MIN_ENT 1562624 + +extern struct bus_type vio_bus_type; + +struct iommu_table; + +/* + * Platform Facilities Option (PFO)-specific data + */ + +/* Starting unit address for PFO devices on the VIO BUS */ +#define VIO_BASE_PFO_UA 0x50000000 + +/** + * vio_pfo_op - PFO operation parameters + * + * @flags: h_call subfunctions and modifiers + * @in: Input data block logical real address + * @inlen: If non-negative, the length of the input data block. If negative, + * the length of the input data descriptor list in bytes. + * @out: Output data block logical real address + * @outlen: If non-negative, the length of the input data block. If negative, + * the length of the input data descriptor list in bytes. + * @csbcpb: Logical real address of the 4k naturally-aligned storage block + * containing the CSB & optional FC field specific CPB + * @timeout: # of milliseconds to retry h_call, 0 for no timeout. + * @hcall_err: pointer to return the h_call return value, else NULL + */ +struct vio_pfo_op { + u64 flags; + s64 in; + s64 inlen; + s64 out; + s64 outlen; + u64 csbcpb; + void *done; + unsigned long handle; + unsigned int timeout; + long hcall_err; +}; + +/* End PFO specific data */ + +enum vio_dev_family { + VDEVICE, /* The OF node is a child of /vdevice */ + PFO, /* The OF node is a child of /ibm,platform-facilities */ +}; + +/** + * vio_dev - This structure is used to describe virtual I/O devices. + * + * @desired: set from return of driver's get_desired_dma() function + * @entitled: bytes of IO data that has been reserved for this device. + * @allocated: bytes of IO data currently in use by the device. + * @allocs_failed: number of DMA failures due to insufficient entitlement. + */ +struct vio_dev { + const char *name; + const char *type; + uint32_t unit_address; + uint32_t resource_id; + unsigned int irq; + struct { + size_t desired; + size_t entitled; + size_t allocated; + atomic_t allocs_failed; + } cmo; + enum vio_dev_family family; + struct device dev; +}; + +struct vio_driver { + const char *name; + const struct vio_device_id *id_table; + int (*probe)(struct vio_dev *dev, const struct vio_device_id *id); + int (*remove)(struct vio_dev *dev); + /* A driver must have a get_desired_dma() function to + * be loaded in a CMO environment if it uses DMA. + */ + unsigned long (*get_desired_dma)(struct vio_dev *dev); + const struct dev_pm_ops *pm; + struct device_driver driver; +}; + +extern int __vio_register_driver(struct vio_driver *drv, struct module *owner, + const char *mod_name); +/* + * vio_register_driver must be a macro so that KBUILD_MODNAME can be expanded + */ +#define vio_register_driver(driver) \ + __vio_register_driver(driver, THIS_MODULE, KBUILD_MODNAME) +extern void vio_unregister_driver(struct vio_driver *drv); + +extern int vio_cmo_entitlement_update(size_t); +extern void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired); + +extern void vio_unregister_device(struct vio_dev *dev); + +extern int vio_h_cop_sync(struct vio_dev *vdev, struct vio_pfo_op *op); + +struct device_node; + +extern struct vio_dev *vio_register_device_node( + struct device_node *node_vdev); +extern const void *vio_get_attribute(struct vio_dev *vdev, char *which, + int *length); +#ifdef CONFIG_PPC_PSERIES +extern struct vio_dev *vio_find_node(struct device_node *vnode); +extern int vio_enable_interrupts(struct vio_dev *dev); +extern int vio_disable_interrupts(struct vio_dev *dev); +#else +static inline int vio_enable_interrupts(struct vio_dev *dev) +{ + return 0; +} +#endif + +static inline struct vio_driver *to_vio_driver(struct device_driver *drv) +{ + return container_of(drv, struct vio_driver, driver); +} + +static inline struct vio_dev *to_vio_dev(struct device *dev) +{ + return container_of(dev, struct vio_dev, dev); +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_VIO_H */ diff --git a/arch/powerpc/include/asm/vmalloc.h b/arch/powerpc/include/asm/vmalloc.h new file mode 100644 index 000000000..b992dfaaa --- /dev/null +++ b/arch/powerpc/include/asm/vmalloc.h @@ -0,0 +1,4 @@ +#ifndef _ASM_POWERPC_VMALLOC_H +#define _ASM_POWERPC_VMALLOC_H + +#endif /* _ASM_POWERPC_VMALLOC_H */ diff --git a/arch/powerpc/include/asm/word-at-a-time.h b/arch/powerpc/include/asm/word-at-a-time.h new file mode 100644 index 000000000..99129b0cd --- /dev/null +++ b/arch/powerpc/include/asm/word-at-a-time.h @@ -0,0 +1,206 @@ +#ifndef _ASM_WORD_AT_A_TIME_H +#define _ASM_WORD_AT_A_TIME_H + +/* + * Word-at-a-time interfaces for PowerPC. + */ + +#include <linux/kernel.h> +#include <asm/asm-compat.h> +#include <asm/ppc_asm.h> + +#ifdef __BIG_ENDIAN__ + +struct word_at_a_time { + const unsigned long high_bits, low_bits; +}; + +#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0xfe) + 1, REPEAT_BYTE(0x7f) } + +/* Bit set in the bytes that have a zero */ +static inline long prep_zero_mask(unsigned long val, unsigned long rhs, const struct word_at_a_time *c) +{ + unsigned long mask = (val & c->low_bits) + c->low_bits; + return ~(mask | rhs); +} + +#define create_zero_mask(mask) (mask) + +static inline long find_zero(unsigned long mask) +{ + long leading_zero_bits; + + asm (PPC_CNTLZL "%0,%1" : "=r" (leading_zero_bits) : "r" (mask)); + return leading_zero_bits >> 3; +} + +static inline unsigned long has_zero(unsigned long val, unsigned long *data, const struct word_at_a_time *c) +{ + unsigned long rhs = val | c->low_bits; + *data = rhs; + return (val + c->high_bits) & ~rhs; +} + +static inline unsigned long zero_bytemask(unsigned long mask) +{ + return ~1ul << __fls(mask); +} + +#else + +#ifdef CONFIG_64BIT + +/* unused */ +struct word_at_a_time { +}; + +#define WORD_AT_A_TIME_CONSTANTS { } + +/* This will give us 0xff for a NULL char and 0x00 elsewhere */ +static inline unsigned long has_zero(unsigned long a, unsigned long *bits, const struct word_at_a_time *c) +{ + unsigned long ret; + unsigned long zero = 0; + + asm("cmpb %0,%1,%2" : "=r" (ret) : "r" (a), "r" (zero)); + *bits = ret; + + return ret; +} + +static inline unsigned long prep_zero_mask(unsigned long a, unsigned long bits, const struct word_at_a_time *c) +{ + return bits; +} + +/* Alan Modra's little-endian strlen tail for 64-bit */ +static inline unsigned long create_zero_mask(unsigned long bits) +{ + unsigned long leading_zero_bits; + long trailing_zero_bit_mask; + + asm("addi %1,%2,-1\n\t" + "andc %1,%1,%2\n\t" + "popcntd %0,%1" + : "=r" (leading_zero_bits), "=&r" (trailing_zero_bit_mask) + : "b" (bits)); + + return leading_zero_bits; +} + +static inline unsigned long find_zero(unsigned long mask) +{ + return mask >> 3; +} + +/* This assumes that we never ask for an all 1s bitmask */ +static inline unsigned long zero_bytemask(unsigned long mask) +{ + return (1UL << mask) - 1; +} + +#else /* 32-bit case */ + +struct word_at_a_time { + const unsigned long one_bits, high_bits; +}; + +#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0x01), REPEAT_BYTE(0x80) } + +/* + * This is largely generic for little-endian machines, but the + * optimal byte mask counting is probably going to be something + * that is architecture-specific. If you have a reliably fast + * bit count instruction, that might be better than the multiply + * and shift, for example. + */ + +/* Carl Chatfield / Jan Achrenius G+ version for 32-bit */ +static inline long count_masked_bytes(long mask) +{ + /* (000000 0000ff 00ffff ffffff) -> ( 1 1 2 3 ) */ + long a = (0x0ff0001+mask) >> 23; + /* Fix the 1 for 00 case */ + return a & mask; +} + +static inline unsigned long create_zero_mask(unsigned long bits) +{ + bits = (bits - 1) & ~bits; + return bits >> 7; +} + +static inline unsigned long find_zero(unsigned long mask) +{ + return count_masked_bytes(mask); +} + +/* Return nonzero if it has a zero */ +static inline unsigned long has_zero(unsigned long a, unsigned long *bits, const struct word_at_a_time *c) +{ + unsigned long mask = ((a - c->one_bits) & ~a) & c->high_bits; + *bits = mask; + return mask; +} + +static inline unsigned long prep_zero_mask(unsigned long a, unsigned long bits, const struct word_at_a_time *c) +{ + return bits; +} + +/* The mask we created is directly usable as a bytemask */ +#define zero_bytemask(mask) (mask) + +#endif /* CONFIG_64BIT */ + +#endif /* __BIG_ENDIAN__ */ + +/* + * We use load_unaligned_zero() in a selftest, which builds a userspace + * program. Some linker scripts seem to discard the .fixup section, so allow + * the test code to use a different section name. + */ +#ifndef FIXUP_SECTION +#define FIXUP_SECTION ".fixup" +#endif + +static inline unsigned long load_unaligned_zeropad(const void *addr) +{ + unsigned long ret, offset, tmp; + + asm( + "1: " PPC_LL "%[ret], 0(%[addr])\n" + "2:\n" + ".section " FIXUP_SECTION ",\"ax\"\n" + "3: " +#ifdef __powerpc64__ + "clrrdi %[tmp], %[addr], 3\n\t" + "clrlsldi %[offset], %[addr], 61, 3\n\t" + "ld %[ret], 0(%[tmp])\n\t" +#ifdef __BIG_ENDIAN__ + "sld %[ret], %[ret], %[offset]\n\t" +#else + "srd %[ret], %[ret], %[offset]\n\t" +#endif +#else + "clrrwi %[tmp], %[addr], 2\n\t" + "clrlslwi %[offset], %[addr], 30, 3\n\t" + "lwz %[ret], 0(%[tmp])\n\t" +#ifdef __BIG_ENDIAN__ + "slw %[ret], %[ret], %[offset]\n\t" +#else + "srw %[ret], %[ret], %[offset]\n\t" +#endif +#endif + "b 2b\n" + ".previous\n" + EX_TABLE(1b, 3b) + : [tmp] "=&b" (tmp), [offset] "=&r" (offset), [ret] "=&r" (ret) + : [addr] "b" (addr), "m" (*(unsigned long *)addr)); + + return ret; +} + +#undef FIXUP_SECTION + +#endif /* _ASM_WORD_AT_A_TIME_H */ diff --git a/arch/powerpc/include/asm/xics.h b/arch/powerpc/include/asm/xics.h new file mode 100644 index 000000000..8e903b3f9 --- /dev/null +++ b/arch/powerpc/include/asm/xics.h @@ -0,0 +1,174 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Common definitions across all variants of ICP and ICS interrupt + * controllers. + */ + +#ifndef _XICS_H +#define _XICS_H + +#include <linux/interrupt.h> + +#define XICS_IPI 2 +#define XICS_IRQ_SPURIOUS 0 + +/* Want a priority other than 0. Various HW issues require this. */ +#define DEFAULT_PRIORITY 5 + +/* + * Mark IPIs as higher priority so we can take them inside interrupts + * FIXME: still true now? + */ +#define IPI_PRIORITY 4 + +/* The least favored priority */ +#define LOWEST_PRIORITY 0xFF + +/* The number of priorities defined above */ +#define MAX_NUM_PRIORITIES 3 + +/* Native ICP */ +#ifdef CONFIG_PPC_ICP_NATIVE +extern int icp_native_init(void); +extern void icp_native_flush_interrupt(void); +extern void icp_native_cause_ipi_rm(int cpu); +#else +static inline int icp_native_init(void) { return -ENODEV; } +#endif + +/* PAPR ICP */ +#ifdef CONFIG_PPC_ICP_HV +extern int icp_hv_init(void); +#else +static inline int icp_hv_init(void) { return -ENODEV; } +#endif + +#ifdef CONFIG_PPC_POWERNV +extern int icp_opal_init(void); +extern void icp_opal_flush_interrupt(void); +#else +static inline int icp_opal_init(void) { return -ENODEV; } +#endif + +/* ICP ops */ +struct icp_ops { + unsigned int (*get_irq)(void); + void (*eoi)(struct irq_data *d); + void (*set_priority)(unsigned char prio); + void (*teardown_cpu)(void); + void (*flush_ipi)(void); +#ifdef CONFIG_SMP + void (*cause_ipi)(int cpu); + irq_handler_t ipi_action; +#endif +}; + +extern const struct icp_ops *icp_ops; + +/* Native ICS */ +extern int ics_native_init(void); + +/* RTAS ICS */ +#ifdef CONFIG_PPC_ICS_RTAS +extern int ics_rtas_init(void); +#else +static inline int ics_rtas_init(void) { return -ENODEV; } +#endif + +/* HAL ICS */ +#ifdef CONFIG_PPC_POWERNV +extern int ics_opal_init(void); +#else +static inline int ics_opal_init(void) { return -ENODEV; } +#endif + +/* ICS instance, hooked up to chip_data of an irq */ +struct ics { + struct list_head link; + int (*map)(struct ics *ics, unsigned int virq); + void (*mask_unknown)(struct ics *ics, unsigned long vec); + long (*get_server)(struct ics *ics, unsigned long vec); + int (*host_match)(struct ics *ics, struct device_node *node); + char data[]; +}; + +/* Commons */ +extern unsigned int xics_default_server; +extern unsigned int xics_default_distrib_server; +extern unsigned int xics_interrupt_server_size; +extern struct irq_domain *xics_host; + +struct xics_cppr { + unsigned char stack[MAX_NUM_PRIORITIES]; + int index; +}; + +DECLARE_PER_CPU(struct xics_cppr, xics_cppr); + +static inline void xics_push_cppr(unsigned int vec) +{ + struct xics_cppr *os_cppr = this_cpu_ptr(&xics_cppr); + + if (WARN_ON(os_cppr->index >= MAX_NUM_PRIORITIES - 1)) + return; + + if (vec == XICS_IPI) + os_cppr->stack[++os_cppr->index] = IPI_PRIORITY; + else + os_cppr->stack[++os_cppr->index] = DEFAULT_PRIORITY; +} + +static inline unsigned char xics_pop_cppr(void) +{ + struct xics_cppr *os_cppr = this_cpu_ptr(&xics_cppr); + + if (WARN_ON(os_cppr->index < 1)) + return LOWEST_PRIORITY; + + return os_cppr->stack[--os_cppr->index]; +} + +static inline void xics_set_base_cppr(unsigned char cppr) +{ + struct xics_cppr *os_cppr = this_cpu_ptr(&xics_cppr); + + /* we only really want to set the priority when there's + * just one cppr value on the stack + */ + WARN_ON(os_cppr->index != 0); + + os_cppr->stack[0] = cppr; +} + +static inline unsigned char xics_cppr_top(void) +{ + struct xics_cppr *os_cppr = this_cpu_ptr(&xics_cppr); + + return os_cppr->stack[os_cppr->index]; +} + +DECLARE_PER_CPU_SHARED_ALIGNED(unsigned long, xics_ipi_message); + +extern void xics_init(void); +extern void xics_setup_cpu(void); +extern void xics_update_irq_servers(void); +extern void xics_set_cpu_giq(unsigned int gserver, unsigned int join); +extern void xics_mask_unknown_vec(unsigned int vec); +extern irqreturn_t xics_ipi_dispatch(int cpu); +extern void xics_smp_probe(void); +extern void xics_register_ics(struct ics *ics); +extern void xics_teardown_cpu(void); +extern void xics_kexec_teardown_cpu(int secondary); +extern void xics_migrate_irqs_away(void); +extern void icp_native_eoi(struct irq_data *d); +extern int xics_set_irq_type(struct irq_data *d, unsigned int flow_type); +extern int xics_retrigger(struct irq_data *data); +#ifdef CONFIG_SMP +extern int xics_get_irq_server(unsigned int virq, const struct cpumask *cpumask, + unsigned int strict_check); +#else +#define xics_get_irq_server(virq, cpumask, strict_check) (xics_default_server) +#endif + + +#endif /* _XICS_H */ diff --git a/arch/powerpc/include/asm/xive-regs.h b/arch/powerpc/include/asm/xive-regs.h new file mode 100644 index 000000000..8b211faa0 --- /dev/null +++ b/arch/powerpc/include/asm/xive-regs.h @@ -0,0 +1,131 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2016,2017 IBM Corporation. + */ +#ifndef _ASM_POWERPC_XIVE_REGS_H +#define _ASM_POWERPC_XIVE_REGS_H + +/* + * "magic" Event State Buffer (ESB) MMIO offsets. + * + * Each interrupt source has a 2-bit state machine called ESB + * which can be controlled by MMIO. It's made of 2 bits, P and + * Q. P indicates that an interrupt is pending (has been sent + * to a queue and is waiting for an EOI). Q indicates that the + * interrupt has been triggered while pending. + * + * This acts as a coalescing mechanism in order to guarantee + * that a given interrupt only occurs at most once in a queue. + * + * When doing an EOI, the Q bit will indicate if the interrupt + * needs to be re-triggered. + * + * The following offsets into the ESB MMIO allow to read or + * manipulate the PQ bits. They must be used with an 8-bytes + * load instruction. They all return the previous state of the + * interrupt (atomically). + * + * Additionally, some ESB pages support doing an EOI via a + * store at 0 and some ESBs support doing a trigger via a + * separate trigger page. + */ +#define XIVE_ESB_STORE_EOI 0x400 /* Store */ +#define XIVE_ESB_LOAD_EOI 0x000 /* Load */ +#define XIVE_ESB_GET 0x800 /* Load */ +#define XIVE_ESB_SET_PQ_00 0xc00 /* Load */ +#define XIVE_ESB_SET_PQ_01 0xd00 /* Load */ +#define XIVE_ESB_SET_PQ_10 0xe00 /* Load */ +#define XIVE_ESB_SET_PQ_11 0xf00 /* Load */ + +/* + * Load-after-store ordering + * + * Adding this offset to the load address will enforce + * load-after-store ordering. This is required to use StoreEOI. + */ +#define XIVE_ESB_LD_ST_MO 0x40 /* Load-after-store ordering */ + +#define XIVE_ESB_VAL_P 0x2 +#define XIVE_ESB_VAL_Q 0x1 +#define XIVE_ESB_INVALID 0xFF + +/* + * Thread Management (aka "TM") registers + */ + +/* TM register offsets */ +#define TM_QW0_USER 0x000 /* All rings */ +#define TM_QW1_OS 0x010 /* Ring 0..2 */ +#define TM_QW2_HV_POOL 0x020 /* Ring 0..1 */ +#define TM_QW3_HV_PHYS 0x030 /* Ring 0..1 */ + +/* Byte offsets inside a QW QW0 QW1 QW2 QW3 */ +#define TM_NSR 0x0 /* + + - + */ +#define TM_CPPR 0x1 /* - + - + */ +#define TM_IPB 0x2 /* - + + + */ +#define TM_LSMFB 0x3 /* - + + + */ +#define TM_ACK_CNT 0x4 /* - + - - */ +#define TM_INC 0x5 /* - + - + */ +#define TM_AGE 0x6 /* - + - + */ +#define TM_PIPR 0x7 /* - + - + */ + +#define TM_WORD0 0x0 +#define TM_WORD1 0x4 + +/* + * QW word 2 contains the valid bit at the top and other fields + * depending on the QW. + */ +#define TM_WORD2 0x8 +#define TM_QW0W2_VU PPC_BIT32(0) +#define TM_QW0W2_LOGIC_SERV PPC_BITMASK32(1,31) // XX 2,31 ? +#define TM_QW1W2_VO PPC_BIT32(0) +#define TM_QW1W2_OS_CAM PPC_BITMASK32(8,31) +#define TM_QW2W2_VP PPC_BIT32(0) +#define TM_QW2W2_POOL_CAM PPC_BITMASK32(8,31) +#define TM_QW3W2_VT PPC_BIT32(0) +#define TM_QW3W2_LP PPC_BIT32(6) +#define TM_QW3W2_LE PPC_BIT32(7) +#define TM_QW3W2_T PPC_BIT32(31) + +/* + * In addition to normal loads to "peek" and writes (only when invalid) + * using 4 and 8 bytes accesses, the above registers support these + * "special" byte operations: + * + * - Byte load from QW0[NSR] - User level NSR (EBB) + * - Byte store to QW0[NSR] - User level NSR (EBB) + * - Byte load/store to QW1[CPPR] and QW3[CPPR] - CPPR access + * - Byte load from QW3[TM_WORD2] - Read VT||00000||LP||LE on thrd 0 + * otherwise VT||0000000 + * - Byte store to QW3[TM_WORD2] - Set VT bit (and LP/LE if present) + * + * Then we have all these "special" CI ops at these offset that trigger + * all sorts of side effects: + */ +#define TM_SPC_ACK_EBB 0x800 /* Load8 ack EBB to reg*/ +#define TM_SPC_ACK_OS_REG 0x810 /* Load16 ack OS irq to reg */ +#define TM_SPC_PUSH_USR_CTX 0x808 /* Store32 Push/Validate user context */ +#define TM_SPC_PULL_USR_CTX 0x808 /* Load32 Pull/Invalidate user context */ +#define TM_SPC_SET_OS_PENDING 0x812 /* Store8 Set OS irq pending bit */ +#define TM_SPC_PULL_OS_CTX 0x818 /* Load32/Load64 Pull/Invalidate OS context to reg */ +#define TM_SPC_PULL_POOL_CTX 0x828 /* Load32/Load64 Pull/Invalidate Pool context to reg*/ +#define TM_SPC_ACK_HV_REG 0x830 /* Load16 ack HV irq to reg */ +#define TM_SPC_PULL_USR_CTX_OL 0xc08 /* Store8 Pull/Inval usr ctx to odd line */ +#define TM_SPC_ACK_OS_EL 0xc10 /* Store8 ack OS irq to even line */ +#define TM_SPC_ACK_HV_POOL_EL 0xc20 /* Store8 ack HV evt pool to even line */ +#define TM_SPC_ACK_HV_EL 0xc30 /* Store8 ack HV irq to even line */ +/* XXX more... */ + +/* NSR fields for the various QW ack types */ +#define TM_QW0_NSR_EB PPC_BIT8(0) +#define TM_QW1_NSR_EO PPC_BIT8(0) +#define TM_QW3_NSR_HE PPC_BITMASK8(0,1) +#define TM_QW3_NSR_HE_NONE 0 +#define TM_QW3_NSR_HE_POOL 1 +#define TM_QW3_NSR_HE_PHYS 2 +#define TM_QW3_NSR_HE_LSI 3 +#define TM_QW3_NSR_I PPC_BIT8(2) +#define TM_QW3_NSR_GRP_LVL PPC_BIT8(3,7) + +#endif /* _ASM_POWERPC_XIVE_REGS_H */ diff --git a/arch/powerpc/include/asm/xive.h b/arch/powerpc/include/asm/xive.h new file mode 100644 index 000000000..309b4d65b --- /dev/null +++ b/arch/powerpc/include/asm/xive.h @@ -0,0 +1,166 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2016,2017 IBM Corporation. + */ +#ifndef _ASM_POWERPC_XIVE_H +#define _ASM_POWERPC_XIVE_H + +#include <asm/opal-api.h> + +#define XIVE_INVALID_VP 0xffffffff + +#ifdef CONFIG_PPC_XIVE + +/* + * Thread Interrupt Management Area (TIMA) + * + * This is a global MMIO region divided in 4 pages of varying access + * permissions, providing access to per-cpu interrupt management + * functions. It always identifies the CPU doing the access based + * on the PowerBus initiator ID, thus we always access via the + * same offset regardless of where the code is executing + */ +extern void __iomem *xive_tima; +extern unsigned long xive_tima_os; + +/* + * Offset in the TM area of our current execution level (provided by + * the backend) + */ +extern u32 xive_tima_offset; + +/* + * Per-irq data (irq_get_handler_data for normal IRQs), IPIs + * have it stored in the xive_cpu structure. We also cache + * for normal interrupts the current target CPU. + * + * This structure is setup by the backend for each interrupt. + */ +struct xive_irq_data { + u64 flags; + u64 eoi_page; + void __iomem *eoi_mmio; + u64 trig_page; + void __iomem *trig_mmio; + u32 esb_shift; + int src_chip; + u32 hw_irq; + + /* Setup/used by frontend */ + int target; + /* + * saved_p means that there is a queue entry for this interrupt + * in some CPU's queue (not including guest vcpu queues), even + * if P is not set in the source ESB. + * stale_p means that there is no queue entry for this interrupt + * in some CPU's queue, even if P is set in the source ESB. + */ + bool saved_p; + bool stale_p; +}; +#define XIVE_IRQ_FLAG_STORE_EOI 0x01 +#define XIVE_IRQ_FLAG_LSI 0x02 +#define XIVE_IRQ_FLAG_SHIFT_BUG 0x04 +#define XIVE_IRQ_FLAG_MASK_FW 0x08 +#define XIVE_IRQ_FLAG_EOI_FW 0x10 +#define XIVE_IRQ_FLAG_H_INT_ESB 0x20 + +/* Special flag set by KVM for excalation interrupts */ +#define XIVE_IRQ_NO_EOI 0x80 + +#define XIVE_INVALID_CHIP_ID -1 + +/* A queue tracking structure in a CPU */ +struct xive_q { + __be32 *qpage; + u32 msk; + u32 idx; + u32 toggle; + u64 eoi_phys; + u32 esc_irq; + atomic_t count; + atomic_t pending_count; + u64 guest_qaddr; + u32 guest_qshift; +}; + +/* Global enable flags for the XIVE support */ +extern bool __xive_enabled; + +static inline bool xive_enabled(void) { return __xive_enabled; } + +bool xive_spapr_init(void); +bool xive_native_init(void); +void xive_smp_probe(void); +int xive_smp_prepare_cpu(unsigned int cpu); +void xive_smp_setup_cpu(void); +void xive_smp_disable_cpu(void); +void xive_teardown_cpu(void); +void xive_shutdown(void); +void xive_flush_interrupt(void); + +/* xmon hook */ +void xmon_xive_do_dump(int cpu); +int xmon_xive_get_irq_config(u32 hw_irq, struct irq_data *d); + +/* APIs used by KVM */ +u32 xive_native_default_eq_shift(void); +u32 xive_native_alloc_vp_block(u32 max_vcpus); +void xive_native_free_vp_block(u32 vp_base); +int xive_native_populate_irq_data(u32 hw_irq, + struct xive_irq_data *data); +void xive_cleanup_irq_data(struct xive_irq_data *xd); +void xive_native_free_irq(u32 irq); +int xive_native_configure_irq(u32 hw_irq, u32 target, u8 prio, u32 sw_irq); + +int xive_native_configure_queue(u32 vp_id, struct xive_q *q, u8 prio, + __be32 *qpage, u32 order, bool can_escalate); +void xive_native_disable_queue(u32 vp_id, struct xive_q *q, u8 prio); + +void xive_native_sync_source(u32 hw_irq); +void xive_native_sync_queue(u32 hw_irq); +bool is_xive_irq(struct irq_chip *chip); +int xive_native_enable_vp(u32 vp_id, bool single_escalation); +int xive_native_disable_vp(u32 vp_id); +int xive_native_get_vp_info(u32 vp_id, u32 *out_cam_id, u32 *out_chip_id); +bool xive_native_has_single_escalation(void); + +int xive_native_get_queue_info(u32 vp_id, uint32_t prio, + u64 *out_qpage, + u64 *out_qsize, + u64 *out_qeoi_page, + u32 *out_escalate_irq, + u64 *out_qflags); + +int xive_native_get_queue_state(u32 vp_id, uint32_t prio, u32 *qtoggle, + u32 *qindex); +int xive_native_set_queue_state(u32 vp_id, uint32_t prio, u32 qtoggle, + u32 qindex); +int xive_native_get_vp_state(u32 vp_id, u64 *out_state); +bool xive_native_has_queue_state_support(void); +extern u32 xive_native_alloc_irq_on_chip(u32 chip_id); + +static inline u32 xive_native_alloc_irq(void) +{ + return xive_native_alloc_irq_on_chip(OPAL_XIVE_ANY_CHIP); +} + +#else + +static inline bool xive_enabled(void) { return false; } + +static inline bool xive_spapr_init(void) { return false; } +static inline bool xive_native_init(void) { return false; } +static inline void xive_smp_probe(void) { } +static inline int xive_smp_prepare_cpu(unsigned int cpu) { return -EINVAL; } +static inline void xive_smp_setup_cpu(void) { } +static inline void xive_smp_disable_cpu(void) { } +static inline void xive_shutdown(void) { } +static inline void xive_flush_interrupt(void) { } + +static inline u32 xive_native_alloc_vp_block(u32 max_vcpus) { return XIVE_INVALID_VP; } +static inline void xive_native_free_vp_block(u32 vp_base) { } + +#endif + +#endif /* _ASM_POWERPC_XIVE_H */ diff --git a/arch/powerpc/include/asm/xmon.h b/arch/powerpc/include/asm/xmon.h new file mode 100644 index 000000000..454a7fc61 --- /dev/null +++ b/arch/powerpc/include/asm/xmon.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef __ASM_POWERPC_XMON_H +#define __ASM_POWERPC_XMON_H + +/* + * Copyrignt (C) 2006 IBM Corp + */ + +#ifdef __KERNEL__ + +#include <linux/irqreturn.h> + +#ifdef CONFIG_XMON +extern void xmon_setup(void); +extern void xmon_register_spus(struct list_head *list); +struct pt_regs; +extern int xmon(struct pt_regs *excp); +extern irqreturn_t xmon_irq(int, void *); +#else +static inline void xmon_setup(void) { }; +static inline void xmon_register_spus(struct list_head *list) { }; +#endif + +#if defined(CONFIG_XMON) && defined(CONFIG_SMP) +extern int cpus_are_in_xmon(void); +#endif + +extern __printf(1, 2) void xmon_printf(const char *format, ...); + +#endif /* __KERNEL __ */ +#endif /* __ASM_POWERPC_XMON_H */ diff --git a/arch/powerpc/include/asm/xor.h b/arch/powerpc/include/asm/xor.h new file mode 100644 index 000000000..37d05c11d --- /dev/null +++ b/arch/powerpc/include/asm/xor.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * + * Copyright (C) IBM Corporation, 2012 + * + * Author: Anton Blanchard <anton@au.ibm.com> + */ +#ifndef _ASM_POWERPC_XOR_H +#define _ASM_POWERPC_XOR_H + +#ifdef CONFIG_ALTIVEC + +#include <asm/cputable.h> +#include <asm/cpu_has_feature.h> +#include <asm/xor_altivec.h> + +static struct xor_block_template xor_block_altivec = { + .name = "altivec", + .do_2 = xor_altivec_2, + .do_3 = xor_altivec_3, + .do_4 = xor_altivec_4, + .do_5 = xor_altivec_5, +}; + +#define XOR_SPEED_ALTIVEC() \ + do { \ + if (cpu_has_feature(CPU_FTR_ALTIVEC)) \ + xor_speed(&xor_block_altivec); \ + } while (0) +#else +#define XOR_SPEED_ALTIVEC() +#endif + +/* Also try the generic routines. */ +#include <asm-generic/xor.h> + +#undef XOR_TRY_TEMPLATES +#define XOR_TRY_TEMPLATES \ +do { \ + xor_speed(&xor_block_8regs); \ + xor_speed(&xor_block_8regs_p); \ + xor_speed(&xor_block_32regs); \ + xor_speed(&xor_block_32regs_p); \ + XOR_SPEED_ALTIVEC(); \ +} while (0) + +#endif /* _ASM_POWERPC_XOR_H */ diff --git a/arch/powerpc/include/asm/xor_altivec.h b/arch/powerpc/include/asm/xor_altivec.h new file mode 100644 index 000000000..6ca923510 --- /dev/null +++ b/arch/powerpc/include/asm/xor_altivec.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_POWERPC_XOR_ALTIVEC_H +#define _ASM_POWERPC_XOR_ALTIVEC_H + +#ifdef CONFIG_ALTIVEC + +void xor_altivec_2(unsigned long bytes, unsigned long *v1_in, + unsigned long *v2_in); +void xor_altivec_3(unsigned long bytes, unsigned long *v1_in, + unsigned long *v2_in, unsigned long *v3_in); +void xor_altivec_4(unsigned long bytes, unsigned long *v1_in, + unsigned long *v2_in, unsigned long *v3_in, + unsigned long *v4_in); +void xor_altivec_5(unsigned long bytes, unsigned long *v1_in, + unsigned long *v2_in, unsigned long *v3_in, + unsigned long *v4_in, unsigned long *v5_in); + +#endif +#endif /* _ASM_POWERPC_XOR_ALTIVEC_H */ |