1 files changed, 118 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/44x/canyonlands.c b/arch/powerpc/platforms/44x/canyonlands.c
new file mode 100644
index 000000000..807968a75
--- /dev/null
+++ b/arch/powerpc/platforms/44x/canyonlands.c
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * This contain platform specific code for APM PPC460EX based Canyonlands
+ * board.
+ *
+ * Copyright (c) 2010, Applied Micro Circuits Corporation
+ * Author: Rupjyoti Sarmah <rsarmah@apm.com>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
+#include <asm/udbg.h>
+#include <asm/uic.h>
+#include <linux/of_platform.h>
+#include <linux/delay.h>
+#include "44x.h"
+
+#define BCSR_USB_EN	0x11
+
+static const struct of_device_id ppc460ex_of_bus[] __initconst = {
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init ppc460ex_device_probe(void)
+{
+	of_platform_bus_probe(NULL, ppc460ex_of_bus, NULL);
+
+	return 0;
+}
+machine_device_initcall(canyonlands, ppc460ex_device_probe);
+
+/* Using this code only for the Canyonlands board.  */
+
+static int __init ppc460ex_probe(void)
+{
+	if (of_machine_is_compatible("amcc,canyonlands")) {
+		pci_set_flags(PCI_REASSIGN_ALL_RSRC);
+		return 1;
+	}
+	return 0;
+}
+
+/* USB PHY fixup code on Canyonlands kit. */
+
+static int __init ppc460ex_canyonlands_fixup(void)
+{
+	u8 __iomem *bcsr ;
+	void __iomem *vaddr;
+	struct device_node *np;
+	int ret = 0;
+
+	np = of_find_compatible_node(NULL, NULL, "amcc,ppc460ex-bcsr");
+	if (!np) {
+		printk(KERN_ERR "failed did not find amcc, ppc460ex bcsr node\n");
+		return -ENODEV;
+	}
+
+	bcsr = of_iomap(np, 0);
+	of_node_put(np);
+
+	if (!bcsr) {
+		printk(KERN_CRIT "Could not remap bcsr\n");
+		ret = -ENODEV;
+		goto err_bcsr;
+	}
+
+	np = of_find_compatible_node(NULL, NULL, "ibm,ppc4xx-gpio");
+	if (!np) {
+		printk(KERN_ERR "failed did not find ibm,ppc4xx-gpio node\n");
+		return -ENODEV;
+	}
+
+	vaddr = of_iomap(np, 0);
+	of_node_put(np);
+
+	if (!vaddr) {
+		printk(KERN_CRIT "Could not get gpio node address\n");
+		ret = -ENODEV;
+		goto err_gpio;
+	}
+	/* Disable USB, through the BCSR7 bits */
+	setbits8(&bcsr[7], BCSR_USB_EN);
+
+	/* Wait for a while after reset */
+	msleep(100);
+
+	/* Enable USB here */
+	clrbits8(&bcsr[7], BCSR_USB_EN);
+
+	/*
+	 * Configure multiplexed gpio16 and gpio19 as alternate1 output
+	 * source after USB reset. In this configuration gpio16 will be
+	 * USB2HStop and gpio19 will be USB2DStop. For more details refer to
+	 * table 34-7 of PPC460EX user manual.
+	 */
+	setbits32((vaddr + GPIO0_OSRH), 0x42000000);
+	setbits32((vaddr + GPIO0_TSRH), 0x42000000);
+err_gpio:
+	iounmap(vaddr);
+err_bcsr:
+	iounmap(bcsr);
+	return ret;
+}
+machine_device_initcall(canyonlands, ppc460ex_canyonlands_fixup);
+define_machine(canyonlands) {
+	.name = "Canyonlands",
+	.probe = ppc460ex_probe,
+	.progress = udbg_progress,
+	.init_IRQ = uic_init_tree,
+	.get_irq = uic_get_irq,
+	.restart = ppc4xx_reset_system,
+	.calibrate_decr = generic_calibrate_decr,
+};