diff options
Diffstat (limited to 'arch/powerpc/platforms/44x/iss4xx.c')
| -rw-r--r-- | arch/powerpc/platforms/44x/iss4xx.c | 162 |
1 files changed, 162 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/44x/iss4xx.c b/arch/powerpc/platforms/44x/iss4xx.c new file mode 100644 index 000000000..c5f825914 --- /dev/null +++ b/arch/powerpc/platforms/44x/iss4xx.c @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * PPC476 board specific routines + * + * Copyright 2010 Torez Smith, IBM Corporation. + * + * Based on earlier code: + * Matt Porter <mporter@kernel.crashing.org> + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * Copyright (c) 2003-2005 Zultys Technologies + * + * Rewritten and ported to the merged powerpc tree: + * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation. + */ + +#include <linux/init.h> +#include <linux/of_platform.h> +#include <linux/rtc.h> + +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/time.h> +#include <asm/uic.h> +#include <asm/ppc4xx.h> +#include <asm/mpic.h> +#include <asm/mmu.h> + +static const struct of_device_id iss4xx_of_bus[] __initconst = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,plb6", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + {}, +}; + +static int __init iss4xx_device_probe(void) +{ + of_platform_bus_probe(NULL, iss4xx_of_bus, NULL); + of_instantiate_rtc(); + + return 0; +} +machine_device_initcall(iss4xx, iss4xx_device_probe); + +/* We can have either UICs or MPICs */ +static void __init iss4xx_init_irq(void) +{ + struct device_node *np; + + /* Find top level interrupt controller */ + for_each_node_with_property(np, "interrupt-controller") { + if (of_get_property(np, "interrupts", NULL) == NULL) + break; + } + if (np == NULL) + panic("Can't find top level interrupt controller"); + + /* Check type and do appropriate initialization */ + if (of_device_is_compatible(np, "ibm,uic")) { + uic_init_tree(); + ppc_md.get_irq = uic_get_irq; +#ifdef CONFIG_MPIC + } else if (of_device_is_compatible(np, "chrp,open-pic")) { + /* The MPIC driver will get everything it needs from the + * device-tree, just pass 0 to all arguments + */ + struct mpic *mpic = mpic_alloc(np, 0, MPIC_NO_RESET, 0, 0, " MPIC "); + BUG_ON(mpic == NULL); + mpic_init(mpic); + ppc_md.get_irq = mpic_get_irq; +#endif + } else + panic("Unrecognized top level interrupt controller"); +} + +#ifdef CONFIG_SMP +static void smp_iss4xx_setup_cpu(int cpu) +{ + mpic_setup_this_cpu(); +} + +static int smp_iss4xx_kick_cpu(int cpu) +{ + struct device_node *cpunode = of_get_cpu_node(cpu, NULL); + const u64 *spin_table_addr_prop; + u32 *spin_table; + extern void start_secondary_47x(void); + + BUG_ON(cpunode == NULL); + + /* Assume spin table. We could test for the enable-method in + * the device-tree but currently there's little point as it's + * our only supported method + */ + spin_table_addr_prop = of_get_property(cpunode, "cpu-release-addr", + NULL); + if (spin_table_addr_prop == NULL) { + pr_err("CPU%d: Can't start, missing cpu-release-addr !\n", cpu); + return -ENOENT; + } + + /* Assume it's mapped as part of the linear mapping. This is a bit + * fishy but will work fine for now + */ + spin_table = (u32 *)__va(*spin_table_addr_prop); + pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table); + + spin_table[3] = cpu; + smp_wmb(); + spin_table[1] = __pa(start_secondary_47x); + mb(); + + return 0; +} + +static struct smp_ops_t iss_smp_ops = { + .probe = smp_mpic_probe, + .message_pass = smp_mpic_message_pass, + .setup_cpu = smp_iss4xx_setup_cpu, + .kick_cpu = smp_iss4xx_kick_cpu, + .give_timebase = smp_generic_give_timebase, + .take_timebase = smp_generic_take_timebase, +}; + +static void __init iss4xx_smp_init(void) +{ + if (mmu_has_feature(MMU_FTR_TYPE_47x)) + smp_ops = &iss_smp_ops; +} + +#else /* CONFIG_SMP */ +static void __init iss4xx_smp_init(void) { } +#endif /* CONFIG_SMP */ + +static void __init iss4xx_setup_arch(void) +{ + iss4xx_smp_init(); +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init iss4xx_probe(void) +{ + if (!of_machine_is_compatible("ibm,iss-4xx")) + return 0; + + return 1; +} + +define_machine(iss4xx) { + .name = "ISS-4xx", + .probe = iss4xx_probe, + .progress = udbg_progress, + .init_IRQ = iss4xx_init_irq, + .setup_arch = iss4xx_setup_arch, + .restart = ppc4xx_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; |