1 files changed, 293 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/44x/ppc476.c b/arch/powerpc/platforms/44x/ppc476.c
new file mode 100644
index 000000000..07f7e3ce6
--- /dev/null
+++ b/arch/powerpc/platforms/44x/ppc476.c
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * PowerPC 476FPE board specific routines
+ *
+ * Copyright © 2013 Tony Breeds IBM Corporation
+ * Copyright © 2013 Alistair Popple IBM Corporation
+ *
+ * Based on earlier code:
+ *    Matt Porter <mporter@kernel.crashing.org>
+ *    Copyright 2002-2005 MontaVista Software Inc.
+ *
+ *    Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *    Copyright (c) 2003-2005 Zultys Technologies
+ *
+ *    Rewritten and ported to the merged powerpc tree:
+ *    Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ *    Copyright © 2011 David Kliekamp IBM Corporation
+ */
+
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/ppc4xx.h>
+#include <asm/mpic.h>
+#include <asm/mmu.h>
+#include <asm/swiotlb.h>
+
+#include <linux/pci.h>
+#include <linux/i2c.h>
+
+static const struct of_device_id ppc47x_of_bus[] __initconst = {
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,plb6", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{},
+};
+
+/* The EEPROM is missing and the default values are bogus.  This forces USB in
+ * to EHCI mode */
+static void quirk_ppc_currituck_usb_fixup(struct pci_dev *dev)
+{
+	if (of_machine_is_compatible("ibm,currituck")) {
+		pci_write_config_dword(dev, 0xe0, 0x0114231f);
+		pci_write_config_dword(dev, 0xe4, 0x00006c40);
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(0x1033, 0x0035, quirk_ppc_currituck_usb_fixup);
+
+/* Akebono has an AVR microcontroller attached to the I2C bus
+ * which is used to power off/reset the system. */
+
+/* AVR I2C Commands */
+#define AVR_PWRCTL_CMD (0x26)
+
+/* Flags for the power control I2C commands */
+#define AVR_PWRCTL_PWROFF (0x01)
+#define AVR_PWRCTL_RESET (0x02)
+
+static struct i2c_client *avr_i2c_client;
+static void __noreturn avr_halt_system(int pwrctl_flags)
+{
+	/* Request the AVR to reset the system */
+	i2c_smbus_write_byte_data(avr_i2c_client,
+				  AVR_PWRCTL_CMD, pwrctl_flags);
+
+	/* Wait for system to be reset */
+	while (1)
+		;
+}
+
+static void avr_power_off_system(void)
+{
+	avr_halt_system(AVR_PWRCTL_PWROFF);
+}
+
+static void __noreturn avr_reset_system(char *cmd)
+{
+	avr_halt_system(AVR_PWRCTL_RESET);
+}
+
+static int avr_probe(struct i2c_client *client)
+{
+	avr_i2c_client = client;
+	ppc_md.restart = avr_reset_system;
+	pm_power_off = avr_power_off_system;
+	return 0;
+}
+
+static const struct i2c_device_id avr_id[] = {
+	{ "akebono-avr", 0 },
+	{ }
+};
+
+static struct i2c_driver avr_driver = {
+	.driver = {
+		.name = "akebono-avr",
+	},
+	.probe_new = avr_probe,
+	.id_table = avr_id,
+};
+
+static int __init ppc47x_device_probe(void)
+{
+	i2c_add_driver(&avr_driver);
+	of_platform_bus_probe(NULL, ppc47x_of_bus, NULL);
+
+	return 0;
+}
+machine_device_initcall(ppc47x, ppc47x_device_probe);
+
+static void __init ppc47x_init_irq(void)
+{
+	struct device_node *np;
+
+	/* Find top level interrupt controller */
+	for_each_node_with_property(np, "interrupt-controller") {
+		if (of_get_property(np, "interrupts", NULL) == NULL)
+			break;
+	}
+	if (np == NULL)
+		panic("Can't find top level interrupt controller");
+
+	/* Check type and do appropriate initialization */
+	if (of_device_is_compatible(np, "chrp,open-pic")) {
+		/* The MPIC driver will get everything it needs from the
+		 * device-tree, just pass 0 to all arguments
+		 */
+		struct mpic *mpic =
+			mpic_alloc(np, 0, MPIC_NO_RESET, 0, 0, " MPIC     ");
+		BUG_ON(mpic == NULL);
+		mpic_init(mpic);
+		ppc_md.get_irq = mpic_get_irq;
+	} else
+		panic("Unrecognized top level interrupt controller");
+}
+
+#ifdef CONFIG_SMP
+static void smp_ppc47x_setup_cpu(int cpu)
+{
+	mpic_setup_this_cpu();
+}
+
+static int smp_ppc47x_kick_cpu(int cpu)
+{
+	struct device_node *cpunode = of_get_cpu_node(cpu, NULL);
+	const u64 *spin_table_addr_prop;
+	u32 *spin_table;
+	extern void start_secondary_47x(void);
+
+	BUG_ON(cpunode == NULL);
+
+	/* Assume spin table. We could test for the enable-method in
+	 * the device-tree but currently there's little point as it's
+	 * our only supported method
+	 */
+	spin_table_addr_prop =
+		of_get_property(cpunode, "cpu-release-addr", NULL);
+
+	if (spin_table_addr_prop == NULL) {
+		pr_err("CPU%d: Can't start, missing cpu-release-addr !\n",
+		       cpu);
+		return 1;
+	}
+
+	/* Assume it's mapped as part of the linear mapping. This is a bit
+	 * fishy but will work fine for now
+	 *
+	 * XXX: Is there any reason to assume differently?
+	 */
+	spin_table = (u32 *)__va(*spin_table_addr_prop);
+	pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table);
+
+	spin_table[3] = cpu;
+	smp_wmb();
+	spin_table[1] = __pa(start_secondary_47x);
+	mb();
+
+	return 0;
+}
+
+static struct smp_ops_t ppc47x_smp_ops = {
+	.probe		= smp_mpic_probe,
+	.message_pass	= smp_mpic_message_pass,
+	.setup_cpu	= smp_ppc47x_setup_cpu,
+	.kick_cpu	= smp_ppc47x_kick_cpu,
+	.give_timebase	= smp_generic_give_timebase,
+	.take_timebase	= smp_generic_take_timebase,
+};
+
+static void __init ppc47x_smp_init(void)
+{
+	if (mmu_has_feature(MMU_FTR_TYPE_47x))
+		smp_ops = &ppc47x_smp_ops;
+}
+
+#else /* CONFIG_SMP */
+static void __init ppc47x_smp_init(void) { }
+#endif /* CONFIG_SMP */
+
+static void __init ppc47x_setup_arch(void)
+{
+
+	/* No need to check the DMA config as we /know/ our windows are all of
+	 * RAM.  Lets hope that doesn't change */
+	swiotlb_detect_4g();
+
+	ppc47x_smp_init();
+}
+
+static int board_rev = -1;
+static int __init ppc47x_get_board_rev(void)
+{
+	int reg;
+	u8 *fpga;
+	struct device_node *np = NULL;
+
+	if (of_machine_is_compatible("ibm,currituck")) {
+		np = of_find_compatible_node(NULL, NULL, "ibm,currituck-fpga");
+		reg = 0;
+	} else if (of_machine_is_compatible("ibm,akebono")) {
+		np = of_find_compatible_node(NULL, NULL, "ibm,akebono-fpga");
+		reg = 2;
+	}
+
+	if (!np)
+		goto fail;
+
+	fpga = (u8 *) of_iomap(np, 0);
+	of_node_put(np);
+	if (!fpga)
+		goto fail;
+
+	board_rev = ioread8(fpga + reg) & 0x03;
+	pr_info("%s: Found board revision %d\n", __func__, board_rev);
+	iounmap(fpga);
+	return 0;
+
+fail:
+	pr_info("%s: Unable to find board revision\n", __func__);
+	return 0;
+}
+machine_arch_initcall(ppc47x, ppc47x_get_board_rev);
+
+/* Use USB controller should have been hardware swizzled but it wasn't :( */
+static void ppc47x_pci_irq_fixup(struct pci_dev *dev)
+{
+	if (dev->vendor == 0x1033 && (dev->device == 0x0035 ||
+				      dev->device == 0x00e0)) {
+		if (board_rev == 0) {
+			dev->irq = irq_create_mapping(NULL, 47);
+			pr_info("%s: Mapping irq %d\n", __func__, dev->irq);
+		} else if (board_rev == 2) {
+			dev->irq = irq_create_mapping(NULL, 49);
+			pr_info("%s: Mapping irq %d\n", __func__, dev->irq);
+		} else {
+			pr_alert("%s: Unknown board revision\n", __func__);
+		}
+	}
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init ppc47x_probe(void)
+{
+	if (of_machine_is_compatible("ibm,akebono"))
+		return 1;
+
+	if (of_machine_is_compatible("ibm,currituck")) {
+		ppc_md.pci_irq_fixup = ppc47x_pci_irq_fixup;
+		return 1;
+	}
+
+	return 0;
+}
+
+define_machine(ppc47x) {
+	.name			= "PowerPC 47x",
+	.probe			= ppc47x_probe,
+	.progress		= udbg_progress,
+	.init_IRQ		= ppc47x_init_irq,
+	.setup_arch		= ppc47x_setup_arch,
+	.restart		= ppc4xx_reset_system,
+	.calibrate_decr		= generic_calibrate_decr,
+};