summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/83xx/usb.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/83xx/usb.c')
-rw-r--r--arch/powerpc/platforms/83xx/usb.c251
1 files changed, 251 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
new file mode 100644
index 000000000..3d247d726
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/usb.c
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Freescale 83xx USB SOC setup code
+ *
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ * Author: Li Yang
+ */
+
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc83xx.h"
+
+
+#ifdef CONFIG_PPC_MPC834x
+int mpc834x_usb_cfg(void)
+{
+ unsigned long sccr, sicrl, sicrh;
+ void __iomem *immap;
+ struct device_node *np = NULL;
+ int port0_is_dr = 0, port1_is_dr = 0;
+ const void *prop, *dr_mode;
+
+ immap = ioremap(get_immrbase(), 0x1000);
+ if (!immap)
+ return -ENOMEM;
+
+ /* Read registers */
+ /* Note: DR and MPH must use the same clock setting in SCCR */
+ sccr = in_be32(immap + MPC83XX_SCCR_OFFS) & ~MPC83XX_SCCR_USB_MASK;
+ sicrl = in_be32(immap + MPC83XX_SICRL_OFFS) & ~MPC834X_SICRL_USB_MASK;
+ sicrh = in_be32(immap + MPC83XX_SICRH_OFFS) & ~MPC834X_SICRH_USB_UTMI;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
+ if (np) {
+ sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */
+
+ prop = of_get_property(np, "phy_type", NULL);
+ port1_is_dr = 1;
+ if (prop && (!strcmp(prop, "utmi") ||
+ !strcmp(prop, "utmi_wide"))) {
+ sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1;
+ sicrh |= MPC834X_SICRH_USB_UTMI;
+ port0_is_dr = 1;
+ } else if (prop && !strcmp(prop, "serial")) {
+ dr_mode = of_get_property(np, "dr_mode", NULL);
+ if (dr_mode && !strcmp(dr_mode, "otg")) {
+ sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1;
+ port0_is_dr = 1;
+ } else {
+ sicrl |= MPC834X_SICRL_USB1;
+ }
+ } else if (prop && !strcmp(prop, "ulpi")) {
+ sicrl |= MPC834X_SICRL_USB1;
+ } else {
+ printk(KERN_WARNING "834x USB PHY type not supported\n");
+ }
+ of_node_put(np);
+ }
+ np = of_find_compatible_node(NULL, NULL, "fsl-usb2-mph");
+ if (np) {
+ sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */
+
+ prop = of_get_property(np, "port0", NULL);
+ if (prop) {
+ if (port0_is_dr)
+ printk(KERN_WARNING
+ "834x USB port0 can't be used by both DR and MPH!\n");
+ sicrl &= ~MPC834X_SICRL_USB0;
+ }
+ prop = of_get_property(np, "port1", NULL);
+ if (prop) {
+ if (port1_is_dr)
+ printk(KERN_WARNING
+ "834x USB port1 can't be used by both DR and MPH!\n");
+ sicrl &= ~MPC834X_SICRL_USB1;
+ }
+ of_node_put(np);
+ }
+
+ /* Write back */
+ out_be32(immap + MPC83XX_SCCR_OFFS, sccr);
+ out_be32(immap + MPC83XX_SICRL_OFFS, sicrl);
+ out_be32(immap + MPC83XX_SICRH_OFFS, sicrh);
+
+ iounmap(immap);
+ return 0;
+}
+#endif /* CONFIG_PPC_MPC834x */
+
+#ifdef CONFIG_PPC_MPC831x
+int mpc831x_usb_cfg(void)
+{
+ u32 temp;
+ void __iomem *immap, *usb_regs;
+ struct device_node *np = NULL;
+ struct device_node *immr_node = NULL;
+ const void *prop;
+ struct resource res;
+ int ret = 0;
+#ifdef CONFIG_USB_OTG
+ const void *dr_mode;
+#endif
+
+ np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
+ if (!np)
+ return -ENODEV;
+ prop = of_get_property(np, "phy_type", NULL);
+
+ /* Map IMMR space for pin and clock settings */
+ immap = ioremap(get_immrbase(), 0x1000);
+ if (!immap) {
+ of_node_put(np);
+ return -ENOMEM;
+ }
+
+ /* Configure clock */
+ immr_node = of_get_parent(np);
+ if (immr_node && (of_device_is_compatible(immr_node, "fsl,mpc8315-immr") ||
+ of_device_is_compatible(immr_node, "fsl,mpc8308-immr")))
+ clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
+ MPC8315_SCCR_USB_MASK,
+ MPC8315_SCCR_USB_DRCM_01);
+ else
+ clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
+ MPC83XX_SCCR_USB_MASK,
+ MPC83XX_SCCR_USB_DRCM_11);
+
+ /* Configure pin mux for ULPI. There is no pin mux for UTMI */
+ if (prop && !strcmp(prop, "ulpi")) {
+ if (of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) {
+ clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+ MPC8308_SICRH_USB_MASK,
+ MPC8308_SICRH_USB_ULPI);
+ } else if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) {
+ clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
+ MPC8315_SICRL_USB_MASK,
+ MPC8315_SICRL_USB_ULPI);
+ clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+ MPC8315_SICRH_USB_MASK,
+ MPC8315_SICRH_USB_ULPI);
+ } else {
+ clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
+ MPC831X_SICRL_USB_MASK,
+ MPC831X_SICRL_USB_ULPI);
+ clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+ MPC831X_SICRH_USB_MASK,
+ MPC831X_SICRH_USB_ULPI);
+ }
+ }
+
+ iounmap(immap);
+
+ of_node_put(immr_node);
+
+ /* Map USB SOC space */
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret) {
+ of_node_put(np);
+ return ret;
+ }
+ usb_regs = ioremap(res.start, resource_size(&res));
+
+ /* Using on-chip PHY */
+ if (prop && (!strcmp(prop, "utmi_wide") ||
+ !strcmp(prop, "utmi"))) {
+ u32 refsel;
+
+ if (of_device_is_compatible(immr_node, "fsl,mpc8308-immr"))
+ goto out;
+
+ if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
+ refsel = CONTROL_REFSEL_24MHZ;
+ else
+ refsel = CONTROL_REFSEL_48MHZ;
+ /* Set UTMI_PHY_EN and REFSEL */
+ out_be32(usb_regs + FSL_USB2_CONTROL_OFFS,
+ CONTROL_UTMI_PHY_EN | refsel);
+ /* Using external UPLI PHY */
+ } else if (prop && !strcmp(prop, "ulpi")) {
+ /* Set PHY_CLK_SEL to ULPI */
+ temp = CONTROL_PHY_CLK_SEL_ULPI;
+#ifdef CONFIG_USB_OTG
+ /* Set OTG_PORT */
+ if (!of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) {
+ dr_mode = of_get_property(np, "dr_mode", NULL);
+ if (dr_mode && !strcmp(dr_mode, "otg"))
+ temp |= CONTROL_OTG_PORT;
+ }
+#endif /* CONFIG_USB_OTG */
+ out_be32(usb_regs + FSL_USB2_CONTROL_OFFS, temp);
+ } else {
+ printk(KERN_WARNING "831x USB PHY type not supported\n");
+ ret = -EINVAL;
+ }
+
+out:
+ iounmap(usb_regs);
+ of_node_put(np);
+ return ret;
+}
+#endif /* CONFIG_PPC_MPC831x */
+
+#ifdef CONFIG_PPC_MPC837x
+int mpc837x_usb_cfg(void)
+{
+ void __iomem *immap;
+ struct device_node *np = NULL;
+ const void *prop;
+ int ret = 0;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
+ if (!np || !of_device_is_available(np)) {
+ of_node_put(np);
+ return -ENODEV;
+ }
+ prop = of_get_property(np, "phy_type", NULL);
+
+ if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) {
+ printk(KERN_WARNING "837x USB PHY type not supported\n");
+ of_node_put(np);
+ return -EINVAL;
+ }
+
+ /* Map IMMR space for pin and clock settings */
+ immap = ioremap(get_immrbase(), 0x1000);
+ if (!immap) {
+ of_node_put(np);
+ return -ENOMEM;
+ }
+
+ /* Configure clock */
+ clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, MPC837X_SCCR_USB_DRCM_11,
+ MPC837X_SCCR_USB_DRCM_11);
+
+ /* Configure pin mux for ULPI/serial */
+ clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, MPC837X_SICRL_USB_MASK,
+ MPC837X_SICRL_USB_ULPI);
+
+ iounmap(immap);
+ of_node_put(np);
+ return ret;
+}
+#endif /* CONFIG_PPC_MPC837x */