diff options
Diffstat (limited to 'arch/powerpc/platforms/85xx/xes_mpc85xx.c')
| -rw-r--r-- | arch/powerpc/platforms/85xx/xes_mpc85xx.c | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c new file mode 100644 index 000000000..d54e1ae56 --- /dev/null +++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2009 Extreme Engineering Solutions, Inc. + * + * X-ES board-specific functionality + * + * Based on mpc85xx_ds code from Freescale Semiconductor, Inc. + * + * Author: Nate Case <ncase@xes-inc.com> + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/interrupt.h> +#include <linux/of_platform.h> + +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/mpic.h> + +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include "smp.h" + +#include "mpc85xx.h" + +/* A few bit definitions needed for fixups on some boards */ +#define MPC85xx_L2CTL_L2E 0x80000000 /* L2 enable */ +#define MPC85xx_L2CTL_L2I 0x40000000 /* L2 flash invalidate */ +#define MPC85xx_L2CTL_L2SIZ_MASK 0x30000000 /* L2 SRAM size (R/O) */ + +void __init xes_mpc85xx_pic_init(void) +{ + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, + 0, 256, " OpenPIC "); + BUG_ON(mpic == NULL); + mpic_init(mpic); +} + +static void xes_mpc85xx_configure_l2(void __iomem *l2_base) +{ + volatile uint32_t ctl, tmp; + + asm volatile("msync; isync"); + tmp = in_be32(l2_base); + + /* + * xMon may have enabled part of L2 as SRAM, so we need to set it + * up for all cache mode just to be safe. + */ + printk(KERN_INFO "xes_mpc85xx: Enabling L2 as cache\n"); + + ctl = MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2I; + if (of_machine_is_compatible("MPC8540") || + of_machine_is_compatible("MPC8560")) + /* + * Assume L2 SRAM is used fully for cache, so set + * L2BLKSZ (bits 4:5) to match L2SIZ (bits 2:3). + */ + ctl |= (tmp & MPC85xx_L2CTL_L2SIZ_MASK) >> 2; + + asm volatile("msync; isync"); + out_be32(l2_base, ctl); + asm volatile("msync; isync"); +} + +static void xes_mpc85xx_fixups(void) +{ + struct device_node *np; + int err; + + /* + * Legacy xMon firmware on some X-ES boards does not enable L2 + * as cache. We must ensure that they get enabled here. + */ + for_each_node_by_name(np, "l2-cache-controller") { + struct resource r[2]; + void __iomem *l2_base; + + /* Only MPC8548, MPC8540, and MPC8560 boards are affected */ + if (!of_device_is_compatible(np, + "fsl,mpc8548-l2-cache-controller") && + !of_device_is_compatible(np, + "fsl,mpc8540-l2-cache-controller") && + !of_device_is_compatible(np, + "fsl,mpc8560-l2-cache-controller")) + continue; + + err = of_address_to_resource(np, 0, &r[0]); + if (err) { + printk(KERN_WARNING "xes_mpc85xx: Could not get " + "resource for device tree node '%pOF'", + np); + continue; + } + + l2_base = ioremap(r[0].start, resource_size(&r[0])); + + xes_mpc85xx_configure_l2(l2_base); + } +} + +/* + * Setup the architecture + */ +static void __init xes_mpc85xx_setup_arch(void) +{ + struct device_node *root; + const char *model = "Unknown"; + + root = of_find_node_by_path("/"); + if (root == NULL) + return; + + model = of_get_property(root, "model", NULL); + + printk(KERN_INFO "X-ES MPC85xx-based single-board computer: %s\n", + model + strlen("xes,")); + + xes_mpc85xx_fixups(); + + mpc85xx_smp_init(); + + fsl_pci_assign_primary(); +} + +machine_arch_initcall(xes_mpc8572, mpc85xx_common_publish_devices); +machine_arch_initcall(xes_mpc8548, mpc85xx_common_publish_devices); +machine_arch_initcall(xes_mpc8540, mpc85xx_common_publish_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init xes_mpc8572_probe(void) +{ + return of_machine_is_compatible("xes,MPC8572"); +} + +static int __init xes_mpc8548_probe(void) +{ + return of_machine_is_compatible("xes,MPC8548"); +} + +static int __init xes_mpc8540_probe(void) +{ + return of_machine_is_compatible("xes,MPC8540"); +} + +define_machine(xes_mpc8572) { + .name = "X-ES MPC8572", + .probe = xes_mpc8572_probe, + .setup_arch = xes_mpc85xx_setup_arch, + .init_IRQ = xes_mpc85xx_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif + .get_irq = mpic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +define_machine(xes_mpc8548) { + .name = "X-ES MPC8548", + .probe = xes_mpc8548_probe, + .setup_arch = xes_mpc85xx_setup_arch, + .init_IRQ = xes_mpc85xx_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif + .get_irq = mpic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +define_machine(xes_mpc8540) { + .name = "X-ES MPC8540", + .probe = xes_mpc8540_probe, + .setup_arch = xes_mpc85xx_setup_arch, + .init_IRQ = xes_mpc85xx_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif + .get_irq = mpic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; |