diff options
Diffstat (limited to 'arch/powerpc/platforms/powernv/eeh-powernv.c')
| -rw-r--r-- | arch/powerpc/platforms/powernv/eeh-powernv.c | 1714 |
1 files changed, 1714 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c new file mode 100644 index 000000000..89e22c460 --- /dev/null +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c @@ -0,0 +1,1714 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * PowerNV Platform dependent EEH operations + * + * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2013. + */ + +#include <linux/atomic.h> +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/export.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/msi.h> +#include <linux/of.h> +#include <linux/pci.h> +#include <linux/proc_fs.h> +#include <linux/rbtree.h> +#include <linux/sched.h> +#include <linux/seq_file.h> +#include <linux/spinlock.h> + +#include <asm/eeh.h> +#include <asm/eeh_event.h> +#include <asm/firmware.h> +#include <asm/io.h> +#include <asm/iommu.h> +#include <asm/machdep.h> +#include <asm/msi_bitmap.h> +#include <asm/opal.h> +#include <asm/ppc-pci.h> +#include <asm/pnv-pci.h> + +#include "powernv.h" +#include "pci.h" +#include "../../../../drivers/pci/pci.h" + +static int eeh_event_irq = -EINVAL; + +static void pnv_pcibios_bus_add_device(struct pci_dev *pdev) +{ + dev_dbg(&pdev->dev, "EEH: Setting up device\n"); + eeh_probe_device(pdev); +} + +static irqreturn_t pnv_eeh_event(int irq, void *data) +{ + /* + * We simply send a special EEH event if EEH has been + * enabled. We don't care about EEH events until we've + * finished processing the outstanding ones. Event processing + * gets unmasked in next_error() if EEH is enabled. + */ + disable_irq_nosync(irq); + + if (eeh_enabled()) + eeh_send_failure_event(NULL); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_DEBUG_FS +static ssize_t pnv_eeh_ei_write(struct file *filp, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct pci_controller *hose = filp->private_data; + struct eeh_pe *pe; + int pe_no, type, func; + unsigned long addr, mask; + char buf[50]; + int ret; + + if (!eeh_ops || !eeh_ops->err_inject) + return -ENXIO; + + /* Copy over argument buffer */ + ret = simple_write_to_buffer(buf, sizeof(buf), ppos, user_buf, count); + if (!ret) + return -EFAULT; + + /* Retrieve parameters */ + ret = sscanf(buf, "%x:%x:%x:%lx:%lx", + &pe_no, &type, &func, &addr, &mask); + if (ret != 5) + return -EINVAL; + + /* Retrieve PE */ + pe = eeh_pe_get(hose, pe_no); + if (!pe) + return -ENODEV; + + /* Do error injection */ + ret = eeh_ops->err_inject(pe, type, func, addr, mask); + return ret < 0 ? ret : count; +} + +static const struct file_operations pnv_eeh_ei_fops = { + .open = simple_open, + .llseek = no_llseek, + .write = pnv_eeh_ei_write, +}; + +static int pnv_eeh_dbgfs_set(void *data, int offset, u64 val) +{ + struct pci_controller *hose = data; + struct pnv_phb *phb = hose->private_data; + + out_be64(phb->regs + offset, val); + return 0; +} + +static int pnv_eeh_dbgfs_get(void *data, int offset, u64 *val) +{ + struct pci_controller *hose = data; + struct pnv_phb *phb = hose->private_data; + + *val = in_be64(phb->regs + offset); + return 0; +} + +#define PNV_EEH_DBGFS_ENTRY(name, reg) \ +static int pnv_eeh_dbgfs_set_##name(void *data, u64 val) \ +{ \ + return pnv_eeh_dbgfs_set(data, reg, val); \ +} \ + \ +static int pnv_eeh_dbgfs_get_##name(void *data, u64 *val) \ +{ \ + return pnv_eeh_dbgfs_get(data, reg, val); \ +} \ + \ +DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_dbgfs_ops_##name, \ + pnv_eeh_dbgfs_get_##name, \ + pnv_eeh_dbgfs_set_##name, \ + "0x%llx\n") + +PNV_EEH_DBGFS_ENTRY(outb, 0xD10); +PNV_EEH_DBGFS_ENTRY(inbA, 0xD90); +PNV_EEH_DBGFS_ENTRY(inbB, 0xE10); + +#endif /* CONFIG_DEBUG_FS */ + +static void pnv_eeh_enable_phbs(void) +{ + struct pci_controller *hose; + struct pnv_phb *phb; + + list_for_each_entry(hose, &hose_list, list_node) { + phb = hose->private_data; + /* + * If EEH is enabled, we're going to rely on that. + * Otherwise, we restore to conventional mechanism + * to clear frozen PE during PCI config access. + */ + if (eeh_enabled()) + phb->flags |= PNV_PHB_FLAG_EEH; + else + phb->flags &= ~PNV_PHB_FLAG_EEH; + } +} + +/** + * pnv_eeh_post_init - EEH platform dependent post initialization + * + * EEH platform dependent post initialization on powernv. When + * the function is called, the EEH PEs and devices should have + * been built. If the I/O cache staff has been built, EEH is + * ready to supply service. + */ +int pnv_eeh_post_init(void) +{ + struct pci_controller *hose; + struct pnv_phb *phb; + int ret = 0; + + eeh_show_enabled(); + + /* Register OPAL event notifier */ + eeh_event_irq = opal_event_request(ilog2(OPAL_EVENT_PCI_ERROR)); + if (eeh_event_irq < 0) { + pr_err("%s: Can't register OPAL event interrupt (%d)\n", + __func__, eeh_event_irq); + return eeh_event_irq; + } + + ret = request_irq(eeh_event_irq, pnv_eeh_event, + IRQ_TYPE_LEVEL_HIGH, "opal-eeh", NULL); + if (ret < 0) { + irq_dispose_mapping(eeh_event_irq); + pr_err("%s: Can't request OPAL event interrupt (%d)\n", + __func__, eeh_event_irq); + return ret; + } + + if (!eeh_enabled()) + disable_irq(eeh_event_irq); + + pnv_eeh_enable_phbs(); + + list_for_each_entry(hose, &hose_list, list_node) { + phb = hose->private_data; + + /* Create debugfs entries */ +#ifdef CONFIG_DEBUG_FS + if (phb->has_dbgfs || !phb->dbgfs) + continue; + + phb->has_dbgfs = 1; + debugfs_create_file("err_injct", 0200, + phb->dbgfs, hose, + &pnv_eeh_ei_fops); + + debugfs_create_file("err_injct_outbound", 0600, + phb->dbgfs, hose, + &pnv_eeh_dbgfs_ops_outb); + debugfs_create_file("err_injct_inboundA", 0600, + phb->dbgfs, hose, + &pnv_eeh_dbgfs_ops_inbA); + debugfs_create_file("err_injct_inboundB", 0600, + phb->dbgfs, hose, + &pnv_eeh_dbgfs_ops_inbB); +#endif /* CONFIG_DEBUG_FS */ + } + + return ret; +} + +static int pnv_eeh_find_cap(struct pci_dn *pdn, int cap) +{ + int pos = PCI_CAPABILITY_LIST; + int cnt = 48; /* Maximal number of capabilities */ + u32 status, id; + + if (!pdn) + return 0; + + /* Check if the device supports capabilities */ + pnv_pci_cfg_read(pdn, PCI_STATUS, 2, &status); + if (!(status & PCI_STATUS_CAP_LIST)) + return 0; + + while (cnt--) { + pnv_pci_cfg_read(pdn, pos, 1, &pos); + if (pos < 0x40) + break; + + pos &= ~3; + pnv_pci_cfg_read(pdn, pos + PCI_CAP_LIST_ID, 1, &id); + if (id == 0xff) + break; + + /* Found */ + if (id == cap) + return pos; + + /* Next one */ + pos += PCI_CAP_LIST_NEXT; + } + + return 0; +} + +static int pnv_eeh_find_ecap(struct pci_dn *pdn, int cap) +{ + struct eeh_dev *edev = pdn_to_eeh_dev(pdn); + u32 header; + int pos = 256, ttl = (4096 - 256) / 8; + + if (!edev || !edev->pcie_cap) + return 0; + if (pnv_pci_cfg_read(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL) + return 0; + else if (!header) + return 0; + + while (ttl-- > 0) { + if (PCI_EXT_CAP_ID(header) == cap && pos) + return pos; + + pos = PCI_EXT_CAP_NEXT(header); + if (pos < 256) + break; + + if (pnv_pci_cfg_read(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL) + break; + } + + return 0; +} + +static struct eeh_pe *pnv_eeh_get_upstream_pe(struct pci_dev *pdev) +{ + struct pci_controller *hose = pdev->bus->sysdata; + struct pnv_phb *phb = hose->private_data; + struct pci_dev *parent = pdev->bus->self; + +#ifdef CONFIG_PCI_IOV + /* for VFs we use the PF's PE as the upstream PE */ + if (pdev->is_virtfn) + parent = pdev->physfn; +#endif + + /* otherwise use the PE of our parent bridge */ + if (parent) { + struct pnv_ioda_pe *ioda_pe = pnv_ioda_get_pe(parent); + + return eeh_pe_get(phb->hose, ioda_pe->pe_number); + } + + return NULL; +} + +/** + * pnv_eeh_probe - Do probe on PCI device + * @pdev: pci_dev to probe + * + * Create, or find the existing, eeh_dev for this pci_dev. + */ +static struct eeh_dev *pnv_eeh_probe(struct pci_dev *pdev) +{ + struct pci_dn *pdn = pci_get_pdn(pdev); + struct pci_controller *hose = pdn->phb; + struct pnv_phb *phb = hose->private_data; + struct eeh_dev *edev = pdn_to_eeh_dev(pdn); + struct eeh_pe *upstream_pe; + uint32_t pcie_flags; + int ret; + int config_addr = (pdn->busno << 8) | (pdn->devfn); + + /* + * When probing the root bridge, which doesn't have any + * subordinate PCI devices. We don't have OF node for + * the root bridge. So it's not reasonable to continue + * the probing. + */ + if (!edev || edev->pe) + return NULL; + + /* already configured? */ + if (edev->pdev) { + pr_debug("%s: found existing edev for %04x:%02x:%02x.%01x\n", + __func__, hose->global_number, config_addr >> 8, + PCI_SLOT(config_addr), PCI_FUNC(config_addr)); + return edev; + } + + /* Skip for PCI-ISA bridge */ + if ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA) + return NULL; + + eeh_edev_dbg(edev, "Probing device\n"); + + /* Initialize eeh device */ + edev->mode &= 0xFFFFFF00; + edev->pcix_cap = pnv_eeh_find_cap(pdn, PCI_CAP_ID_PCIX); + edev->pcie_cap = pnv_eeh_find_cap(pdn, PCI_CAP_ID_EXP); + edev->af_cap = pnv_eeh_find_cap(pdn, PCI_CAP_ID_AF); + edev->aer_cap = pnv_eeh_find_ecap(pdn, PCI_EXT_CAP_ID_ERR); + if ((pdev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { + edev->mode |= EEH_DEV_BRIDGE; + if (edev->pcie_cap) { + pnv_pci_cfg_read(pdn, edev->pcie_cap + PCI_EXP_FLAGS, + 2, &pcie_flags); + pcie_flags = (pcie_flags & PCI_EXP_FLAGS_TYPE) >> 4; + if (pcie_flags == PCI_EXP_TYPE_ROOT_PORT) + edev->mode |= EEH_DEV_ROOT_PORT; + else if (pcie_flags == PCI_EXP_TYPE_DOWNSTREAM) + edev->mode |= EEH_DEV_DS_PORT; + } + } + + edev->pe_config_addr = phb->ioda.pe_rmap[config_addr]; + + upstream_pe = pnv_eeh_get_upstream_pe(pdev); + + /* Create PE */ + ret = eeh_pe_tree_insert(edev, upstream_pe); + if (ret) { + eeh_edev_warn(edev, "Failed to add device to PE (code %d)\n", ret); + return NULL; + } + + /* + * If the PE contains any one of following adapters, the + * PCI config space can't be accessed when dumping EEH log. + * Otherwise, we will run into fenced PHB caused by shortage + * of outbound credits in the adapter. The PCI config access + * should be blocked until PE reset. MMIO access is dropped + * by hardware certainly. In order to drop PCI config requests, + * one more flag (EEH_PE_CFG_RESTRICTED) is introduced, which + * will be checked in the backend for PE state retrival. If + * the PE becomes frozen for the first time and the flag has + * been set for the PE, we will set EEH_PE_CFG_BLOCKED for + * that PE to block its config space. + * + * Broadcom BCM5718 2-ports NICs (14e4:1656) + * Broadcom Austin 4-ports NICs (14e4:1657) + * Broadcom Shiner 4-ports 1G NICs (14e4:168a) + * Broadcom Shiner 2-ports 10G NICs (14e4:168e) + */ + if ((pdn->vendor_id == PCI_VENDOR_ID_BROADCOM && + pdn->device_id == 0x1656) || + (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM && + pdn->device_id == 0x1657) || + (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM && + pdn->device_id == 0x168a) || + (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM && + pdn->device_id == 0x168e)) + edev->pe->state |= EEH_PE_CFG_RESTRICTED; + + /* + * Cache the PE primary bus, which can't be fetched when + * full hotplug is in progress. In that case, all child + * PCI devices of the PE are expected to be removed prior + * to PE reset. + */ + if (!(edev->pe->state & EEH_PE_PRI_BUS)) { + edev->pe->bus = pci_find_bus(hose->global_number, + pdn->busno); + if (edev->pe->bus) + edev->pe->state |= EEH_PE_PRI_BUS; + } + + /* + * Enable EEH explicitly so that we will do EEH check + * while accessing I/O stuff + */ + if (!eeh_has_flag(EEH_ENABLED)) { + enable_irq(eeh_event_irq); + pnv_eeh_enable_phbs(); + eeh_add_flag(EEH_ENABLED); + } + + /* Save memory bars */ + eeh_save_bars(edev); + + eeh_edev_dbg(edev, "EEH enabled on device\n"); + + return edev; +} + +/** + * pnv_eeh_set_option - Initialize EEH or MMIO/DMA reenable + * @pe: EEH PE + * @option: operation to be issued + * + * The function is used to control the EEH functionality globally. + * Currently, following options are support according to PAPR: + * Enable EEH, Disable EEH, Enable MMIO and Enable DMA + */ +static int pnv_eeh_set_option(struct eeh_pe *pe, int option) +{ + struct pci_controller *hose = pe->phb; + struct pnv_phb *phb = hose->private_data; + bool freeze_pe = false; + int opt; + s64 rc; + + switch (option) { + case EEH_OPT_DISABLE: + return -EPERM; + case EEH_OPT_ENABLE: + return 0; + case EEH_OPT_THAW_MMIO: + opt = OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO; + break; + case EEH_OPT_THAW_DMA: + opt = OPAL_EEH_ACTION_CLEAR_FREEZE_DMA; + break; + case EEH_OPT_FREEZE_PE: + freeze_pe = true; + opt = OPAL_EEH_ACTION_SET_FREEZE_ALL; + break; + default: + pr_warn("%s: Invalid option %d\n", __func__, option); + return -EINVAL; + } + + /* Freeze master and slave PEs if PHB supports compound PEs */ + if (freeze_pe) { + if (phb->freeze_pe) { + phb->freeze_pe(phb, pe->addr); + return 0; + } + + rc = opal_pci_eeh_freeze_set(phb->opal_id, pe->addr, opt); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n", + __func__, rc, phb->hose->global_number, + pe->addr); + return -EIO; + } + + return 0; + } + + /* Unfreeze master and slave PEs if PHB supports */ + if (phb->unfreeze_pe) + return phb->unfreeze_pe(phb, pe->addr, opt); + + rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe->addr, opt); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld enable %d for PHB#%x-PE#%x\n", + __func__, rc, option, phb->hose->global_number, + pe->addr); + return -EIO; + } + + return 0; +} + +static void pnv_eeh_get_phb_diag(struct eeh_pe *pe) +{ + struct pnv_phb *phb = pe->phb->private_data; + s64 rc; + + rc = opal_pci_get_phb_diag_data2(phb->opal_id, pe->data, + phb->diag_data_size); + if (rc != OPAL_SUCCESS) + pr_warn("%s: Failure %lld getting PHB#%x diag-data\n", + __func__, rc, pe->phb->global_number); +} + +static int pnv_eeh_get_phb_state(struct eeh_pe *pe) +{ + struct pnv_phb *phb = pe->phb->private_data; + u8 fstate = 0; + __be16 pcierr = 0; + s64 rc; + int result = 0; + + rc = opal_pci_eeh_freeze_status(phb->opal_id, + pe->addr, + &fstate, + &pcierr, + NULL); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld getting PHB#%x state\n", + __func__, rc, phb->hose->global_number); + return EEH_STATE_NOT_SUPPORT; + } + + /* + * Check PHB state. If the PHB is frozen for the + * first time, to dump the PHB diag-data. + */ + if (be16_to_cpu(pcierr) != OPAL_EEH_PHB_ERROR) { + result = (EEH_STATE_MMIO_ACTIVE | + EEH_STATE_DMA_ACTIVE | + EEH_STATE_MMIO_ENABLED | + EEH_STATE_DMA_ENABLED); + } else if (!(pe->state & EEH_PE_ISOLATED)) { + eeh_pe_mark_isolated(pe); + pnv_eeh_get_phb_diag(pe); + + if (eeh_has_flag(EEH_EARLY_DUMP_LOG)) + pnv_pci_dump_phb_diag_data(pe->phb, pe->data); + } + + return result; +} + +static int pnv_eeh_get_pe_state(struct eeh_pe *pe) +{ + struct pnv_phb *phb = pe->phb->private_data; + u8 fstate = 0; + __be16 pcierr = 0; + s64 rc; + int result; + + /* + * We don't clobber hardware frozen state until PE + * reset is completed. In order to keep EEH core + * moving forward, we have to return operational + * state during PE reset. + */ + if (pe->state & EEH_PE_RESET) { + result = (EEH_STATE_MMIO_ACTIVE | + EEH_STATE_DMA_ACTIVE | + EEH_STATE_MMIO_ENABLED | + EEH_STATE_DMA_ENABLED); + return result; + } + + /* + * Fetch PE state from hardware. If the PHB + * supports compound PE, let it handle that. + */ + if (phb->get_pe_state) { + fstate = phb->get_pe_state(phb, pe->addr); + } else { + rc = opal_pci_eeh_freeze_status(phb->opal_id, + pe->addr, + &fstate, + &pcierr, + NULL); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld getting PHB#%x-PE%x state\n", + __func__, rc, phb->hose->global_number, + pe->addr); + return EEH_STATE_NOT_SUPPORT; + } + } + + /* Figure out state */ + switch (fstate) { + case OPAL_EEH_STOPPED_NOT_FROZEN: + result = (EEH_STATE_MMIO_ACTIVE | + EEH_STATE_DMA_ACTIVE | + EEH_STATE_MMIO_ENABLED | + EEH_STATE_DMA_ENABLED); + break; + case OPAL_EEH_STOPPED_MMIO_FREEZE: + result = (EEH_STATE_DMA_ACTIVE | + EEH_STATE_DMA_ENABLED); + break; + case OPAL_EEH_STOPPED_DMA_FREEZE: + result = (EEH_STATE_MMIO_ACTIVE | + EEH_STATE_MMIO_ENABLED); + break; + case OPAL_EEH_STOPPED_MMIO_DMA_FREEZE: + result = 0; + break; + case OPAL_EEH_STOPPED_RESET: + result = EEH_STATE_RESET_ACTIVE; + break; + case OPAL_EEH_STOPPED_TEMP_UNAVAIL: + result = EEH_STATE_UNAVAILABLE; + break; + case OPAL_EEH_STOPPED_PERM_UNAVAIL: + result = EEH_STATE_NOT_SUPPORT; + break; + default: + result = EEH_STATE_NOT_SUPPORT; + pr_warn("%s: Invalid PHB#%x-PE#%x state %x\n", + __func__, phb->hose->global_number, + pe->addr, fstate); + } + + /* + * If PHB supports compound PE, to freeze all + * slave PEs for consistency. + * + * If the PE is switching to frozen state for the + * first time, to dump the PHB diag-data. + */ + if (!(result & EEH_STATE_NOT_SUPPORT) && + !(result & EEH_STATE_UNAVAILABLE) && + !(result & EEH_STATE_MMIO_ACTIVE) && + !(result & EEH_STATE_DMA_ACTIVE) && + !(pe->state & EEH_PE_ISOLATED)) { + if (phb->freeze_pe) + phb->freeze_pe(phb, pe->addr); + + eeh_pe_mark_isolated(pe); + pnv_eeh_get_phb_diag(pe); + + if (eeh_has_flag(EEH_EARLY_DUMP_LOG)) + pnv_pci_dump_phb_diag_data(pe->phb, pe->data); + } + + return result; +} + +/** + * pnv_eeh_get_state - Retrieve PE state + * @pe: EEH PE + * @delay: delay while PE state is temporarily unavailable + * + * Retrieve the state of the specified PE. For IODA-compitable + * platform, it should be retrieved from IODA table. Therefore, + * we prefer passing down to hardware implementation to handle + * it. + */ +static int pnv_eeh_get_state(struct eeh_pe *pe, int *delay) +{ + int ret; + + if (pe->type & EEH_PE_PHB) + ret = pnv_eeh_get_phb_state(pe); + else + ret = pnv_eeh_get_pe_state(pe); + + if (!delay) + return ret; + + /* + * If the PE state is temporarily unavailable, + * to inform the EEH core delay for default + * period (1 second) + */ + *delay = 0; + if (ret & EEH_STATE_UNAVAILABLE) + *delay = 1000; + + return ret; +} + +static s64 pnv_eeh_poll(unsigned long id) +{ + s64 rc = OPAL_HARDWARE; + + while (1) { + rc = opal_pci_poll(id); + if (rc <= 0) + break; + + if (system_state < SYSTEM_RUNNING) + udelay(1000 * rc); + else + msleep(rc); + } + + return rc; +} + +int pnv_eeh_phb_reset(struct pci_controller *hose, int option) +{ + struct pnv_phb *phb = hose->private_data; + s64 rc = OPAL_HARDWARE; + + pr_debug("%s: Reset PHB#%x, option=%d\n", + __func__, hose->global_number, option); + + /* Issue PHB complete reset request */ + if (option == EEH_RESET_FUNDAMENTAL || + option == EEH_RESET_HOT) + rc = opal_pci_reset(phb->opal_id, + OPAL_RESET_PHB_COMPLETE, + OPAL_ASSERT_RESET); + else if (option == EEH_RESET_DEACTIVATE) + rc = opal_pci_reset(phb->opal_id, + OPAL_RESET_PHB_COMPLETE, + OPAL_DEASSERT_RESET); + if (rc < 0) + goto out; + + /* + * Poll state of the PHB until the request is done + * successfully. The PHB reset is usually PHB complete + * reset followed by hot reset on root bus. So we also + * need the PCI bus settlement delay. + */ + if (rc > 0) + rc = pnv_eeh_poll(phb->opal_id); + if (option == EEH_RESET_DEACTIVATE) { + if (system_state < SYSTEM_RUNNING) + udelay(1000 * EEH_PE_RST_SETTLE_TIME); + else + msleep(EEH_PE_RST_SETTLE_TIME); + } +out: + if (rc != OPAL_SUCCESS) + return -EIO; + + return 0; +} + +static int pnv_eeh_root_reset(struct pci_controller *hose, int option) +{ + struct pnv_phb *phb = hose->private_data; + s64 rc = OPAL_HARDWARE; + + pr_debug("%s: Reset PHB#%x, option=%d\n", + __func__, hose->global_number, option); + + /* + * During the reset deassert time, we needn't care + * the reset scope because the firmware does nothing + * for fundamental or hot reset during deassert phase. + */ + if (option == EEH_RESET_FUNDAMENTAL) + rc = opal_pci_reset(phb->opal_id, + OPAL_RESET_PCI_FUNDAMENTAL, + OPAL_ASSERT_RESET); + else if (option == EEH_RESET_HOT) + rc = opal_pci_reset(phb->opal_id, + OPAL_RESET_PCI_HOT, + OPAL_ASSERT_RESET); + else if (option == EEH_RESET_DEACTIVATE) + rc = opal_pci_reset(phb->opal_id, + OPAL_RESET_PCI_HOT, + OPAL_DEASSERT_RESET); + if (rc < 0) + goto out; + + /* Poll state of the PHB until the request is done */ + if (rc > 0) + rc = pnv_eeh_poll(phb->opal_id); + if (option == EEH_RESET_DEACTIVATE) + msleep(EEH_PE_RST_SETTLE_TIME); +out: + if (rc != OPAL_SUCCESS) + return -EIO; + + return 0; +} + +static int __pnv_eeh_bridge_reset(struct pci_dev *dev, int option) +{ + struct pci_dn *pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn); + struct eeh_dev *edev = pdn_to_eeh_dev(pdn); + int aer = edev ? edev->aer_cap : 0; + u32 ctrl; + + pr_debug("%s: Secondary Reset PCI bus %04x:%02x with option %d\n", + __func__, pci_domain_nr(dev->bus), + dev->bus->number, option); + + switch (option) { + case EEH_RESET_FUNDAMENTAL: + case EEH_RESET_HOT: + /* Don't report linkDown event */ + if (aer) { + eeh_ops->read_config(edev, aer + PCI_ERR_UNCOR_MASK, + 4, &ctrl); + ctrl |= PCI_ERR_UNC_SURPDN; + eeh_ops->write_config(edev, aer + PCI_ERR_UNCOR_MASK, + 4, ctrl); + } + + eeh_ops->read_config(edev, PCI_BRIDGE_CONTROL, 2, &ctrl); + ctrl |= PCI_BRIDGE_CTL_BUS_RESET; + eeh_ops->write_config(edev, PCI_BRIDGE_CONTROL, 2, ctrl); + + msleep(EEH_PE_RST_HOLD_TIME); + break; + case EEH_RESET_DEACTIVATE: + eeh_ops->read_config(edev, PCI_BRIDGE_CONTROL, 2, &ctrl); + ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET; + eeh_ops->write_config(edev, PCI_BRIDGE_CONTROL, 2, ctrl); + + msleep(EEH_PE_RST_SETTLE_TIME); + + /* Continue reporting linkDown event */ + if (aer) { + eeh_ops->read_config(edev, aer + PCI_ERR_UNCOR_MASK, + 4, &ctrl); + ctrl &= ~PCI_ERR_UNC_SURPDN; + eeh_ops->write_config(edev, aer + PCI_ERR_UNCOR_MASK, + 4, ctrl); + } + + break; + } + + return 0; +} + +static int pnv_eeh_bridge_reset(struct pci_dev *pdev, int option) +{ + struct pci_controller *hose = pci_bus_to_host(pdev->bus); + struct pnv_phb *phb = hose->private_data; + struct device_node *dn = pci_device_to_OF_node(pdev); + uint64_t id = PCI_SLOT_ID(phb->opal_id, + (pdev->bus->number << 8) | pdev->devfn); + uint8_t scope; + int64_t rc; + + /* Hot reset to the bus if firmware cannot handle */ + if (!dn || !of_get_property(dn, "ibm,reset-by-firmware", NULL)) + return __pnv_eeh_bridge_reset(pdev, option); + + pr_debug("%s: FW reset PCI bus %04x:%02x with option %d\n", + __func__, pci_domain_nr(pdev->bus), + pdev->bus->number, option); + + switch (option) { + case EEH_RESET_FUNDAMENTAL: + scope = OPAL_RESET_PCI_FUNDAMENTAL; + break; + case EEH_RESET_HOT: + scope = OPAL_RESET_PCI_HOT; + break; + case EEH_RESET_DEACTIVATE: + return 0; + default: + dev_dbg(&pdev->dev, "%s: Unsupported reset %d\n", + __func__, option); + return -EINVAL; + } + + rc = opal_pci_reset(id, scope, OPAL_ASSERT_RESET); + if (rc <= OPAL_SUCCESS) + goto out; + + rc = pnv_eeh_poll(id); +out: + return (rc == OPAL_SUCCESS) ? 0 : -EIO; +} + +void pnv_pci_reset_secondary_bus(struct pci_dev *dev) +{ + struct pci_controller *hose; + + if (pci_is_root_bus(dev->bus)) { + hose = pci_bus_to_host(dev->bus); + pnv_eeh_root_reset(hose, EEH_RESET_HOT); + pnv_eeh_root_reset(hose, EEH_RESET_DEACTIVATE); + } else { + pnv_eeh_bridge_reset(dev, EEH_RESET_HOT); + pnv_eeh_bridge_reset(dev, EEH_RESET_DEACTIVATE); + } +} + +static void pnv_eeh_wait_for_pending(struct pci_dn *pdn, const char *type, + int pos, u16 mask) +{ + struct eeh_dev *edev = pdn->edev; + int i, status = 0; + + /* Wait for Transaction Pending bit to be cleared */ + for (i = 0; i < 4; i++) { + eeh_ops->read_config(edev, pos, 2, &status); + if (!(status & mask)) + return; + + msleep((1 << i) * 100); + } + + pr_warn("%s: Pending transaction while issuing %sFLR to %04x:%02x:%02x.%01x\n", + __func__, type, + pdn->phb->global_number, pdn->busno, + PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn)); +} + +static int pnv_eeh_do_flr(struct pci_dn *pdn, int option) +{ + struct eeh_dev *edev = pdn_to_eeh_dev(pdn); + u32 reg = 0; + + if (WARN_ON(!edev->pcie_cap)) + return -ENOTTY; + + eeh_ops->read_config(edev, edev->pcie_cap + PCI_EXP_DEVCAP, 4, ®); + if (!(reg & PCI_EXP_DEVCAP_FLR)) + return -ENOTTY; + + switch (option) { + case EEH_RESET_HOT: + case EEH_RESET_FUNDAMENTAL: + pnv_eeh_wait_for_pending(pdn, "", + edev->pcie_cap + PCI_EXP_DEVSTA, + PCI_EXP_DEVSTA_TRPND); + eeh_ops->read_config(edev, edev->pcie_cap + PCI_EXP_DEVCTL, + 4, ®); + reg |= PCI_EXP_DEVCTL_BCR_FLR; + eeh_ops->write_config(edev, edev->pcie_cap + PCI_EXP_DEVCTL, + 4, reg); + msleep(EEH_PE_RST_HOLD_TIME); + break; + case EEH_RESET_DEACTIVATE: + eeh_ops->read_config(edev, edev->pcie_cap + PCI_EXP_DEVCTL, + 4, ®); + reg &= ~PCI_EXP_DEVCTL_BCR_FLR; + eeh_ops->write_config(edev, edev->pcie_cap + PCI_EXP_DEVCTL, + 4, reg); + msleep(EEH_PE_RST_SETTLE_TIME); + break; + } + + return 0; +} + +static int pnv_eeh_do_af_flr(struct pci_dn *pdn, int option) +{ + struct eeh_dev *edev = pdn_to_eeh_dev(pdn); + u32 cap = 0; + + if (WARN_ON(!edev->af_cap)) + return -ENOTTY; + + eeh_ops->read_config(edev, edev->af_cap + PCI_AF_CAP, 1, &cap); + if (!(cap & PCI_AF_CAP_TP) || !(cap & PCI_AF_CAP_FLR)) + return -ENOTTY; + + switch (option) { + case EEH_RESET_HOT: + case EEH_RESET_FUNDAMENTAL: + /* + * Wait for Transaction Pending bit to clear. A word-aligned + * test is used, so we use the conrol offset rather than status + * and shift the test bit to match. + */ + pnv_eeh_wait_for_pending(pdn, "AF", + edev->af_cap + PCI_AF_CTRL, + PCI_AF_STATUS_TP << 8); + eeh_ops->write_config(edev, edev->af_cap + PCI_AF_CTRL, + 1, PCI_AF_CTRL_FLR); + msleep(EEH_PE_RST_HOLD_TIME); + break; + case EEH_RESET_DEACTIVATE: + eeh_ops->write_config(edev, edev->af_cap + PCI_AF_CTRL, 1, 0); + msleep(EEH_PE_RST_SETTLE_TIME); + break; + } + + return 0; +} + +static int pnv_eeh_reset_vf_pe(struct eeh_pe *pe, int option) +{ + struct eeh_dev *edev; + struct pci_dn *pdn; + int ret; + + /* The VF PE should have only one child device */ + edev = list_first_entry_or_null(&pe->edevs, struct eeh_dev, entry); + pdn = eeh_dev_to_pdn(edev); + if (!pdn) + return -ENXIO; + + ret = pnv_eeh_do_flr(pdn, option); + if (!ret) + return ret; + + return pnv_eeh_do_af_flr(pdn, option); +} + +/** + * pnv_eeh_reset - Reset the specified PE + * @pe: EEH PE + * @option: reset option + * + * Do reset on the indicated PE. For PCI bus sensitive PE, + * we need to reset the parent p2p bridge. The PHB has to + * be reinitialized if the p2p bridge is root bridge. For + * PCI device sensitive PE, we will try to reset the device + * through FLR. For now, we don't have OPAL APIs to do HARD + * reset yet, so all reset would be SOFT (HOT) reset. + */ +static int pnv_eeh_reset(struct eeh_pe *pe, int option) +{ + struct pci_controller *hose = pe->phb; + struct pnv_phb *phb; + struct pci_bus *bus; + int64_t rc; + + /* + * For PHB reset, we always have complete reset. For those PEs whose + * primary bus derived from root complex (root bus) or root port + * (usually bus#1), we apply hot or fundamental reset on the root port. + * For other PEs, we always have hot reset on the PE primary bus. + * + * Here, we have different design to pHyp, which always clear the + * frozen state during PE reset. However, the good idea here from + * benh is to keep frozen state before we get PE reset done completely + * (until BAR restore). With the frozen state, HW drops illegal IO + * or MMIO access, which can incur recrusive frozen PE during PE + * reset. The side effect is that EEH core has to clear the frozen + * state explicitly after BAR restore. + */ + if (pe->type & EEH_PE_PHB) + return pnv_eeh_phb_reset(hose, option); + + /* + * The frozen PE might be caused by PAPR error injection + * registers, which are expected to be cleared after hitting + * frozen PE as stated in the hardware spec. Unfortunately, + * that's not true on P7IOC. So we have to clear it manually + * to avoid recursive EEH errors during recovery. + */ + phb = hose->private_data; + if (phb->model == PNV_PHB_MODEL_P7IOC && + (option == EEH_RESET_HOT || + option == EEH_RESET_FUNDAMENTAL)) { + rc = opal_pci_reset(phb->opal_id, + OPAL_RESET_PHB_ERROR, + OPAL_ASSERT_RESET); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld clearing error injection registers\n", + __func__, rc); + return -EIO; + } + } + + if (pe->type & EEH_PE_VF) + return pnv_eeh_reset_vf_pe(pe, option); + + bus = eeh_pe_bus_get(pe); + if (!bus) { + pr_err("%s: Cannot find PCI bus for PHB#%x-PE#%x\n", + __func__, pe->phb->global_number, pe->addr); + return -EIO; + } + + if (pci_is_root_bus(bus)) + return pnv_eeh_root_reset(hose, option); + + /* + * For hot resets try use the generic PCI error recovery reset + * functions. These correctly handles the case where the secondary + * bus is behind a hotplug slot and it will use the slot provided + * reset methods to prevent spurious hotplug events during the reset. + * + * Fundemental resets need to be handled internally to EEH since the + * PCI core doesn't really have a concept of a fundemental reset, + * mainly because there's no standard way to generate one. Only a + * few devices require an FRESET so it should be fine. + */ + if (option != EEH_RESET_FUNDAMENTAL) { + /* + * NB: Skiboot and pnv_eeh_bridge_reset() also no-op the + * de-assert step. It's like the OPAL reset API was + * poorly designed or something... + */ + if (option == EEH_RESET_DEACTIVATE) + return 0; + + rc = pci_bus_error_reset(bus->self); + if (!rc) + return 0; + } + + /* otherwise, use the generic bridge reset. this might call into FW */ + if (pci_is_root_bus(bus->parent)) + return pnv_eeh_root_reset(hose, option); + return pnv_eeh_bridge_reset(bus->self, option); +} + +/** + * pnv_eeh_get_log - Retrieve error log + * @pe: EEH PE + * @severity: temporary or permanent error log + * @drv_log: driver log to be combined with retrieved error log + * @len: length of driver log + * + * Retrieve the temporary or permanent error from the PE. + */ +static int pnv_eeh_get_log(struct eeh_pe *pe, int severity, + char *drv_log, unsigned long len) +{ + if (!eeh_has_flag(EEH_EARLY_DUMP_LOG)) + pnv_pci_dump_phb_diag_data(pe->phb, pe->data); + + return 0; +} + +/** + * pnv_eeh_configure_bridge - Configure PCI bridges in the indicated PE + * @pe: EEH PE + * + * The function will be called to reconfigure the bridges included + * in the specified PE so that the mulfunctional PE would be recovered + * again. + */ +static int pnv_eeh_configure_bridge(struct eeh_pe *pe) +{ + return 0; +} + +/** + * pnv_pe_err_inject - Inject specified error to the indicated PE + * @pe: the indicated PE + * @type: error type + * @func: specific error type + * @addr: address + * @mask: address mask + * + * The routine is called to inject specified error, which is + * determined by @type and @func, to the indicated PE for + * testing purpose. + */ +static int pnv_eeh_err_inject(struct eeh_pe *pe, int type, int func, + unsigned long addr, unsigned long mask) +{ + struct pci_controller *hose = pe->phb; + struct pnv_phb *phb = hose->private_data; + s64 rc; + + if (type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR && + type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64) { + pr_warn("%s: Invalid error type %d\n", + __func__, type); + return -ERANGE; + } + + if (func < OPAL_ERR_INJECT_FUNC_IOA_LD_MEM_ADDR || + func > OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_TARGET) { + pr_warn("%s: Invalid error function %d\n", + __func__, func); + return -ERANGE; + } + + /* Firmware supports error injection ? */ + if (!opal_check_token(OPAL_PCI_ERR_INJECT)) { + pr_warn("%s: Firmware doesn't support error injection\n", + __func__); + return -ENXIO; + } + + /* Do error injection */ + rc = opal_pci_err_inject(phb->opal_id, pe->addr, + type, func, addr, mask); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld injecting error " + "%d-%d to PHB#%x-PE#%x\n", + __func__, rc, type, func, + hose->global_number, pe->addr); + return -EIO; + } + + return 0; +} + +static inline bool pnv_eeh_cfg_blocked(struct pci_dn *pdn) +{ + struct eeh_dev *edev = pdn_to_eeh_dev(pdn); + + if (!edev || !edev->pe) + return false; + + /* + * We will issue FLR or AF FLR to all VFs, which are contained + * in VF PE. It relies on the EEH PCI config accessors. So we + * can't block them during the window. + */ + if (edev->physfn && (edev->pe->state & EEH_PE_RESET)) + return false; + + if (edev->pe->state & EEH_PE_CFG_BLOCKED) + return true; + + return false; +} + +static int pnv_eeh_read_config(struct eeh_dev *edev, + int where, int size, u32 *val) +{ + struct pci_dn *pdn = eeh_dev_to_pdn(edev); + + if (!pdn) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (pnv_eeh_cfg_blocked(pdn)) { + *val = 0xFFFFFFFF; + return PCIBIOS_SET_FAILED; + } + + return pnv_pci_cfg_read(pdn, where, size, val); +} + +static int pnv_eeh_write_config(struct eeh_dev *edev, + int where, int size, u32 val) +{ + struct pci_dn *pdn = eeh_dev_to_pdn(edev); + + if (!pdn) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (pnv_eeh_cfg_blocked(pdn)) + return PCIBIOS_SET_FAILED; + + return pnv_pci_cfg_write(pdn, where, size, val); +} + +static void pnv_eeh_dump_hub_diag_common(struct OpalIoP7IOCErrorData *data) +{ + /* GEM */ + if (data->gemXfir || data->gemRfir || + data->gemRirqfir || data->gemMask || data->gemRwof) + pr_info(" GEM: %016llx %016llx %016llx %016llx %016llx\n", + be64_to_cpu(data->gemXfir), + be64_to_cpu(data->gemRfir), + be64_to_cpu(data->gemRirqfir), + be64_to_cpu(data->gemMask), + be64_to_cpu(data->gemRwof)); + + /* LEM */ + if (data->lemFir || data->lemErrMask || + data->lemAction0 || data->lemAction1 || data->lemWof) + pr_info(" LEM: %016llx %016llx %016llx %016llx %016llx\n", + be64_to_cpu(data->lemFir), + be64_to_cpu(data->lemErrMask), + be64_to_cpu(data->lemAction0), + be64_to_cpu(data->lemAction1), + be64_to_cpu(data->lemWof)); +} + +static void pnv_eeh_get_and_dump_hub_diag(struct pci_controller *hose) +{ + struct pnv_phb *phb = hose->private_data; + struct OpalIoP7IOCErrorData *data = + (struct OpalIoP7IOCErrorData*)phb->diag_data; + long rc; + + rc = opal_pci_get_hub_diag_data(phb->hub_id, data, sizeof(*data)); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failed to get HUB#%llx diag-data (%ld)\n", + __func__, phb->hub_id, rc); + return; + } + + switch (be16_to_cpu(data->type)) { + case OPAL_P7IOC_DIAG_TYPE_RGC: + pr_info("P7IOC diag-data for RGC\n\n"); + pnv_eeh_dump_hub_diag_common(data); + if (data->rgc.rgcStatus || data->rgc.rgcLdcp) + pr_info(" RGC: %016llx %016llx\n", + be64_to_cpu(data->rgc.rgcStatus), + be64_to_cpu(data->rgc.rgcLdcp)); + break; + case OPAL_P7IOC_DIAG_TYPE_BI: + pr_info("P7IOC diag-data for BI %s\n\n", + data->bi.biDownbound ? "Downbound" : "Upbound"); + pnv_eeh_dump_hub_diag_common(data); + if (data->bi.biLdcp0 || data->bi.biLdcp1 || + data->bi.biLdcp2 || data->bi.biFenceStatus) + pr_info(" BI: %016llx %016llx %016llx %016llx\n", + be64_to_cpu(data->bi.biLdcp0), + be64_to_cpu(data->bi.biLdcp1), + be64_to_cpu(data->bi.biLdcp2), + be64_to_cpu(data->bi.biFenceStatus)); + break; + case OPAL_P7IOC_DIAG_TYPE_CI: + pr_info("P7IOC diag-data for CI Port %d\n\n", + data->ci.ciPort); + pnv_eeh_dump_hub_diag_common(data); + if (data->ci.ciPortStatus || data->ci.ciPortLdcp) + pr_info(" CI: %016llx %016llx\n", + be64_to_cpu(data->ci.ciPortStatus), + be64_to_cpu(data->ci.ciPortLdcp)); + break; + case OPAL_P7IOC_DIAG_TYPE_MISC: + pr_info("P7IOC diag-data for MISC\n\n"); + pnv_eeh_dump_hub_diag_common(data); + break; + case OPAL_P7IOC_DIAG_TYPE_I2C: + pr_info("P7IOC diag-data for I2C\n\n"); + pnv_eeh_dump_hub_diag_common(data); + break; + default: + pr_warn("%s: Invalid type of HUB#%llx diag-data (%d)\n", + __func__, phb->hub_id, data->type); + } +} + +static int pnv_eeh_get_pe(struct pci_controller *hose, + u16 pe_no, struct eeh_pe **pe) +{ + struct pnv_phb *phb = hose->private_data; + struct pnv_ioda_pe *pnv_pe; + struct eeh_pe *dev_pe; + + /* + * If PHB supports compound PE, to fetch + * the master PE because slave PE is invisible + * to EEH core. + */ + pnv_pe = &phb->ioda.pe_array[pe_no]; + if (pnv_pe->flags & PNV_IODA_PE_SLAVE) { + pnv_pe = pnv_pe->master; + WARN_ON(!pnv_pe || + !(pnv_pe->flags & PNV_IODA_PE_MASTER)); + pe_no = pnv_pe->pe_number; + } + + /* Find the PE according to PE# */ + dev_pe = eeh_pe_get(hose, pe_no); + if (!dev_pe) + return -EEXIST; + + /* Freeze the (compound) PE */ + *pe = dev_pe; + if (!(dev_pe->state & EEH_PE_ISOLATED)) + phb->freeze_pe(phb, pe_no); + + /* + * At this point, we're sure the (compound) PE should + * have been frozen. However, we still need poke until + * hitting the frozen PE on top level. + */ + dev_pe = dev_pe->parent; + while (dev_pe && !(dev_pe->type & EEH_PE_PHB)) { + int ret; + ret = eeh_ops->get_state(dev_pe, NULL); + if (ret <= 0 || eeh_state_active(ret)) { + dev_pe = dev_pe->parent; + continue; + } + + /* Frozen parent PE */ + *pe = dev_pe; + if (!(dev_pe->state & EEH_PE_ISOLATED)) + phb->freeze_pe(phb, dev_pe->addr); + + /* Next one */ + dev_pe = dev_pe->parent; + } + + return 0; +} + +/** + * pnv_eeh_next_error - Retrieve next EEH error to handle + * @pe: Affected PE + * + * The function is expected to be called by EEH core while it gets + * special EEH event (without binding PE). The function calls to + * OPAL APIs for next error to handle. The informational error is + * handled internally by platform. However, the dead IOC, dead PHB, + * fenced PHB and frozen PE should be handled by EEH core eventually. + */ +static int pnv_eeh_next_error(struct eeh_pe **pe) +{ + struct pci_controller *hose; + struct pnv_phb *phb; + struct eeh_pe *phb_pe, *parent_pe; + __be64 frozen_pe_no; + __be16 err_type, severity; + long rc; + int state, ret = EEH_NEXT_ERR_NONE; + + /* + * While running here, it's safe to purge the event queue. The + * event should still be masked. + */ + eeh_remove_event(NULL, false); + + list_for_each_entry(hose, &hose_list, list_node) { + /* + * If the subordinate PCI buses of the PHB has been + * removed or is exactly under error recovery, we + * needn't take care of it any more. + */ + phb = hose->private_data; + phb_pe = eeh_phb_pe_get(hose); + if (!phb_pe || (phb_pe->state & EEH_PE_ISOLATED)) + continue; + + rc = opal_pci_next_error(phb->opal_id, + &frozen_pe_no, &err_type, &severity); + if (rc != OPAL_SUCCESS) { + pr_devel("%s: Invalid return value on " + "PHB#%x (0x%lx) from opal_pci_next_error", + __func__, hose->global_number, rc); + continue; + } + + /* If the PHB doesn't have error, stop processing */ + if (be16_to_cpu(err_type) == OPAL_EEH_NO_ERROR || + be16_to_cpu(severity) == OPAL_EEH_SEV_NO_ERROR) { + pr_devel("%s: No error found on PHB#%x\n", + __func__, hose->global_number); + continue; + } + + /* + * Processing the error. We're expecting the error with + * highest priority reported upon multiple errors on the + * specific PHB. + */ + pr_devel("%s: Error (%d, %d, %llu) on PHB#%x\n", + __func__, be16_to_cpu(err_type), + be16_to_cpu(severity), be64_to_cpu(frozen_pe_no), + hose->global_number); + switch (be16_to_cpu(err_type)) { + case OPAL_EEH_IOC_ERROR: + if (be16_to_cpu(severity) == OPAL_EEH_SEV_IOC_DEAD) { + pr_err("EEH: dead IOC detected\n"); + ret = EEH_NEXT_ERR_DEAD_IOC; + } else if (be16_to_cpu(severity) == OPAL_EEH_SEV_INF) { + pr_info("EEH: IOC informative error " + "detected\n"); + pnv_eeh_get_and_dump_hub_diag(hose); + ret = EEH_NEXT_ERR_NONE; + } + + break; + case OPAL_EEH_PHB_ERROR: + if (be16_to_cpu(severity) == OPAL_EEH_SEV_PHB_DEAD) { + *pe = phb_pe; + pr_err("EEH: dead PHB#%x detected, " + "location: %s\n", + hose->global_number, + eeh_pe_loc_get(phb_pe)); + ret = EEH_NEXT_ERR_DEAD_PHB; + } else if (be16_to_cpu(severity) == + OPAL_EEH_SEV_PHB_FENCED) { + *pe = phb_pe; + pr_err("EEH: Fenced PHB#%x detected, " + "location: %s\n", + hose->global_number, + eeh_pe_loc_get(phb_pe)); + ret = EEH_NEXT_ERR_FENCED_PHB; + } else if (be16_to_cpu(severity) == OPAL_EEH_SEV_INF) { + pr_info("EEH: PHB#%x informative error " + "detected, location: %s\n", + hose->global_number, + eeh_pe_loc_get(phb_pe)); + pnv_eeh_get_phb_diag(phb_pe); + pnv_pci_dump_phb_diag_data(hose, phb_pe->data); + ret = EEH_NEXT_ERR_NONE; + } + + break; + case OPAL_EEH_PE_ERROR: + /* + * If we can't find the corresponding PE, we + * just try to unfreeze. + */ + if (pnv_eeh_get_pe(hose, + be64_to_cpu(frozen_pe_no), pe)) { + pr_info("EEH: Clear non-existing PHB#%x-PE#%llx\n", + hose->global_number, be64_to_cpu(frozen_pe_no)); + pr_info("EEH: PHB location: %s\n", + eeh_pe_loc_get(phb_pe)); + + /* Dump PHB diag-data */ + rc = opal_pci_get_phb_diag_data2(phb->opal_id, + phb->diag_data, phb->diag_data_size); + if (rc == OPAL_SUCCESS) + pnv_pci_dump_phb_diag_data(hose, + phb->diag_data); + + /* Try best to clear it */ + opal_pci_eeh_freeze_clear(phb->opal_id, + be64_to_cpu(frozen_pe_no), + OPAL_EEH_ACTION_CLEAR_FREEZE_ALL); + ret = EEH_NEXT_ERR_NONE; + } else if ((*pe)->state & EEH_PE_ISOLATED || + eeh_pe_passed(*pe)) { + ret = EEH_NEXT_ERR_NONE; + } else { + pr_err("EEH: Frozen PE#%x " + "on PHB#%x detected\n", + (*pe)->addr, + (*pe)->phb->global_number); + pr_err("EEH: PE location: %s, " + "PHB location: %s\n", + eeh_pe_loc_get(*pe), + eeh_pe_loc_get(phb_pe)); + ret = EEH_NEXT_ERR_FROZEN_PE; + } + + break; + default: + pr_warn("%s: Unexpected error type %d\n", + __func__, be16_to_cpu(err_type)); + } + + /* + * EEH core will try recover from fenced PHB or + * frozen PE. In the time for frozen PE, EEH core + * enable IO path for that before collecting logs, + * but it ruins the site. So we have to dump the + * log in advance here. + */ + if ((ret == EEH_NEXT_ERR_FROZEN_PE || + ret == EEH_NEXT_ERR_FENCED_PHB) && + !((*pe)->state & EEH_PE_ISOLATED)) { + eeh_pe_mark_isolated(*pe); + pnv_eeh_get_phb_diag(*pe); + + if (eeh_has_flag(EEH_EARLY_DUMP_LOG)) + pnv_pci_dump_phb_diag_data((*pe)->phb, + (*pe)->data); + } + + /* + * We probably have the frozen parent PE out there and + * we need have to handle frozen parent PE firstly. + */ + if (ret == EEH_NEXT_ERR_FROZEN_PE) { + parent_pe = (*pe)->parent; + while (parent_pe) { + /* Hit the ceiling ? */ + if (parent_pe->type & EEH_PE_PHB) + break; + + /* Frozen parent PE ? */ + state = eeh_ops->get_state(parent_pe, NULL); + if (state > 0 && !eeh_state_active(state)) + *pe = parent_pe; + + /* Next parent level */ + parent_pe = parent_pe->parent; + } + + /* We possibly migrate to another PE */ + eeh_pe_mark_isolated(*pe); + } + + /* + * If we have no errors on the specific PHB or only + * informative error there, we continue poking it. + * Otherwise, we need actions to be taken by upper + * layer. + */ + if (ret > EEH_NEXT_ERR_INF) + break; + } + + /* Unmask the event */ + if (ret == EEH_NEXT_ERR_NONE && eeh_enabled()) + enable_irq(eeh_event_irq); + + return ret; +} + +static int pnv_eeh_restore_config(struct eeh_dev *edev) +{ + struct pnv_phb *phb; + s64 ret = 0; + + if (!edev) + return -EEXIST; + + if (edev->physfn) + return 0; + + phb = edev->controller->private_data; + ret = opal_pci_reinit(phb->opal_id, + OPAL_REINIT_PCI_DEV, edev->bdfn); + + if (ret) { + pr_warn("%s: Can't reinit PCI dev 0x%x (%lld)\n", + __func__, edev->bdfn, ret); + return -EIO; + } + + return ret; +} + +static struct eeh_ops pnv_eeh_ops = { + .name = "powernv", + .probe = pnv_eeh_probe, + .set_option = pnv_eeh_set_option, + .get_state = pnv_eeh_get_state, + .reset = pnv_eeh_reset, + .get_log = pnv_eeh_get_log, + .configure_bridge = pnv_eeh_configure_bridge, + .err_inject = pnv_eeh_err_inject, + .read_config = pnv_eeh_read_config, + .write_config = pnv_eeh_write_config, + .next_error = pnv_eeh_next_error, + .restore_config = pnv_eeh_restore_config, + .notify_resume = NULL +}; + +#ifdef CONFIG_PCI_IOV +static void pnv_pci_fixup_vf_mps(struct pci_dev *pdev) +{ + struct pci_dn *pdn = pci_get_pdn(pdev); + int parent_mps; + + if (!pdev->is_virtfn) + return; + + /* Synchronize MPS for VF and PF */ + parent_mps = pcie_get_mps(pdev->physfn); + if ((128 << pdev->pcie_mpss) >= parent_mps) + pcie_set_mps(pdev, parent_mps); + pdn->mps = pcie_get_mps(pdev); +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pnv_pci_fixup_vf_mps); +#endif /* CONFIG_PCI_IOV */ + +/** + * eeh_powernv_init - Register platform dependent EEH operations + * + * EEH initialization on powernv platform. This function should be + * called before any EEH related functions. + */ +static int __init eeh_powernv_init(void) +{ + int max_diag_size = PNV_PCI_DIAG_BUF_SIZE; + struct pci_controller *hose; + struct pnv_phb *phb; + int ret = -EINVAL; + + if (!firmware_has_feature(FW_FEATURE_OPAL)) { + pr_warn("%s: OPAL is required !\n", __func__); + return -EINVAL; + } + + /* Set probe mode */ + eeh_add_flag(EEH_PROBE_MODE_DEV); + + /* + * P7IOC blocks PCI config access to frozen PE, but PHB3 + * doesn't do that. So we have to selectively enable I/O + * prior to collecting error log. + */ + list_for_each_entry(hose, &hose_list, list_node) { + phb = hose->private_data; + + if (phb->model == PNV_PHB_MODEL_P7IOC) + eeh_add_flag(EEH_ENABLE_IO_FOR_LOG); + + if (phb->diag_data_size > max_diag_size) + max_diag_size = phb->diag_data_size; + + break; + } + + /* + * eeh_init() allocates the eeh_pe and its aux data buf so the + * size needs to be set before calling eeh_init(). + */ + eeh_set_pe_aux_size(max_diag_size); + ppc_md.pcibios_bus_add_device = pnv_pcibios_bus_add_device; + + ret = eeh_init(&pnv_eeh_ops); + if (!ret) + pr_info("EEH: PowerNV platform initialized\n"); + else + pr_info("EEH: Failed to initialize PowerNV platform (%d)\n", ret); + + return ret; +} +machine_arch_initcall(powernv, eeh_powernv_init); |