diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/powerpc/platforms/powernv/opal-fadump.c | 726 |
1 files changed, 726 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/powernv/opal-fadump.c b/arch/powerpc/platforms/powernv/opal-fadump.c new file mode 100644 index 000000000..e23a51a05 --- /dev/null +++ b/arch/powerpc/platforms/powernv/opal-fadump.c @@ -0,0 +1,726 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Firmware-Assisted Dump support on POWER platform (OPAL). + * + * Copyright 2019, Hari Bathini, IBM Corporation. + */ + +#define pr_fmt(fmt) "opal fadump: " fmt + +#include <linux/string.h> +#include <linux/seq_file.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/libfdt.h> +#include <linux/mm.h> +#include <linux/crash_dump.h> + +#include <asm/page.h> +#include <asm/opal.h> +#include <asm/fadump-internal.h> + +#include "opal-fadump.h" + + +#ifdef CONFIG_PRESERVE_FA_DUMP +/* + * When dump is active but PRESERVE_FA_DUMP is enabled on the kernel, + * ensure crash data is preserved in hope that the subsequent memory + * preserving kernel boot is going to process this crash data. + */ +void __init opal_fadump_dt_scan(struct fw_dump *fadump_conf, u64 node) +{ + const struct opal_fadump_mem_struct *opal_fdm_active; + const __be32 *prop; + unsigned long dn; + u64 addr = 0; + s64 ret; + + dn = of_get_flat_dt_subnode_by_name(node, "dump"); + if (dn == -FDT_ERR_NOTFOUND) + return; + + /* + * Check if dump has been initiated on last reboot. + */ + prop = of_get_flat_dt_prop(dn, "mpipl-boot", NULL); + if (!prop) + return; + + ret = opal_mpipl_query_tag(OPAL_MPIPL_TAG_KERNEL, &addr); + if ((ret != OPAL_SUCCESS) || !addr) { + pr_debug("Could not get Kernel metadata (%lld)\n", ret); + return; + } + + /* + * Preserve memory only if kernel memory regions are registered + * with f/w for MPIPL. + */ + addr = be64_to_cpu(addr); + pr_debug("Kernel metadata addr: %llx\n", addr); + opal_fdm_active = (void *)addr; + if (be16_to_cpu(opal_fdm_active->registered_regions) == 0) + return; + + ret = opal_mpipl_query_tag(OPAL_MPIPL_TAG_BOOT_MEM, &addr); + if ((ret != OPAL_SUCCESS) || !addr) { + pr_err("Failed to get boot memory tag (%lld)\n", ret); + return; + } + + /* + * Memory below this address can be used for booting a + * capture kernel or petitboot kernel. Preserve everything + * above this address for processing crashdump. + */ + fadump_conf->boot_mem_top = be64_to_cpu(addr); + pr_debug("Preserve everything above %llx\n", fadump_conf->boot_mem_top); + + pr_info("Firmware-assisted dump is active.\n"); + fadump_conf->dump_active = 1; +} + +#else /* CONFIG_PRESERVE_FA_DUMP */ +static const struct opal_fadump_mem_struct *opal_fdm_active; +static const struct opal_mpipl_fadump *opal_cpu_metadata; +static struct opal_fadump_mem_struct *opal_fdm; + +#ifdef CONFIG_OPAL_CORE +extern bool kernel_initiated; +#endif + +static int opal_fadump_unregister(struct fw_dump *fadump_conf); + +static void opal_fadump_update_config(struct fw_dump *fadump_conf, + const struct opal_fadump_mem_struct *fdm) +{ + pr_debug("Boot memory regions count: %d\n", be16_to_cpu(fdm->region_cnt)); + + /* + * The destination address of the first boot memory region is the + * destination address of boot memory regions. + */ + fadump_conf->boot_mem_dest_addr = be64_to_cpu(fdm->rgn[0].dest); + pr_debug("Destination address of boot memory regions: %#016llx\n", + fadump_conf->boot_mem_dest_addr); + + fadump_conf->fadumphdr_addr = be64_to_cpu(fdm->fadumphdr_addr); +} + +/* + * This function is called in the capture kernel to get configuration details + * from metadata setup by the first kernel. + */ +static void opal_fadump_get_config(struct fw_dump *fadump_conf, + const struct opal_fadump_mem_struct *fdm) +{ + unsigned long base, size, last_end, hole_size; + int i; + + if (!fadump_conf->dump_active) + return; + + last_end = 0; + hole_size = 0; + fadump_conf->boot_memory_size = 0; + + pr_debug("Boot memory regions:\n"); + for (i = 0; i < be16_to_cpu(fdm->region_cnt); i++) { + base = be64_to_cpu(fdm->rgn[i].src); + size = be64_to_cpu(fdm->rgn[i].size); + pr_debug("\t[%03d] base: 0x%lx, size: 0x%lx\n", i, base, size); + + fadump_conf->boot_mem_addr[i] = base; + fadump_conf->boot_mem_sz[i] = size; + fadump_conf->boot_memory_size += size; + hole_size += (base - last_end); + + last_end = base + size; + } + + /* + * Start address of reserve dump area (permanent reservation) for + * re-registering FADump after dump capture. + */ + fadump_conf->reserve_dump_area_start = be64_to_cpu(fdm->rgn[0].dest); + + /* + * Rarely, but it can so happen that system crashes before all + * boot memory regions are registered for MPIPL. In such + * cases, warn that the vmcore may not be accurate and proceed + * anyway as that is the best bet considering free pages, cache + * pages, user pages, etc are usually filtered out. + * + * Hope the memory that could not be preserved only has pages + * that are usually filtered out while saving the vmcore. + */ + if (be16_to_cpu(fdm->region_cnt) > be16_to_cpu(fdm->registered_regions)) { + pr_warn("Not all memory regions were saved!!!\n"); + pr_warn(" Unsaved memory regions:\n"); + i = be16_to_cpu(fdm->registered_regions); + while (i < be16_to_cpu(fdm->region_cnt)) { + pr_warn("\t[%03d] base: 0x%llx, size: 0x%llx\n", + i, be64_to_cpu(fdm->rgn[i].src), + be64_to_cpu(fdm->rgn[i].size)); + i++; + } + + pr_warn("If the unsaved regions only contain pages that are filtered out (eg. free/user pages), the vmcore should still be usable.\n"); + pr_warn("WARNING: If the unsaved regions contain kernel pages, the vmcore will be corrupted.\n"); + } + + fadump_conf->boot_mem_top = (fadump_conf->boot_memory_size + hole_size); + fadump_conf->boot_mem_regs_cnt = be16_to_cpu(fdm->region_cnt); + opal_fadump_update_config(fadump_conf, fdm); +} + +/* Initialize kernel metadata */ +static void opal_fadump_init_metadata(struct opal_fadump_mem_struct *fdm) +{ + fdm->version = OPAL_FADUMP_VERSION; + fdm->region_cnt = cpu_to_be16(0); + fdm->registered_regions = cpu_to_be16(0); + fdm->fadumphdr_addr = cpu_to_be64(0); +} + +static u64 opal_fadump_init_mem_struct(struct fw_dump *fadump_conf) +{ + u64 addr = fadump_conf->reserve_dump_area_start; + u16 reg_cnt; + int i; + + opal_fdm = __va(fadump_conf->kernel_metadata); + opal_fadump_init_metadata(opal_fdm); + + /* Boot memory regions */ + reg_cnt = be16_to_cpu(opal_fdm->region_cnt); + for (i = 0; i < fadump_conf->boot_mem_regs_cnt; i++) { + opal_fdm->rgn[i].src = cpu_to_be64(fadump_conf->boot_mem_addr[i]); + opal_fdm->rgn[i].dest = cpu_to_be64(addr); + opal_fdm->rgn[i].size = cpu_to_be64(fadump_conf->boot_mem_sz[i]); + + reg_cnt++; + addr += fadump_conf->boot_mem_sz[i]; + } + opal_fdm->region_cnt = cpu_to_be16(reg_cnt); + + /* + * Kernel metadata is passed to f/w and retrieved in capture kerenl. + * So, use it to save fadump header address instead of calculating it. + */ + opal_fdm->fadumphdr_addr = cpu_to_be64(be64_to_cpu(opal_fdm->rgn[0].dest) + + fadump_conf->boot_memory_size); + + opal_fadump_update_config(fadump_conf, opal_fdm); + + return addr; +} + +static u64 opal_fadump_get_metadata_size(void) +{ + return PAGE_ALIGN(sizeof(struct opal_fadump_mem_struct)); +} + +static int opal_fadump_setup_metadata(struct fw_dump *fadump_conf) +{ + int err = 0; + s64 ret; + + /* + * Use the last page(s) in FADump memory reservation for + * kernel metadata. + */ + fadump_conf->kernel_metadata = (fadump_conf->reserve_dump_area_start + + fadump_conf->reserve_dump_area_size - + opal_fadump_get_metadata_size()); + pr_info("Kernel metadata addr: %llx\n", fadump_conf->kernel_metadata); + + /* Initialize kernel metadata before registering the address with f/w */ + opal_fdm = __va(fadump_conf->kernel_metadata); + opal_fadump_init_metadata(opal_fdm); + + /* + * Register metadata address with f/w. Can be retrieved in + * the capture kernel. + */ + ret = opal_mpipl_register_tag(OPAL_MPIPL_TAG_KERNEL, + fadump_conf->kernel_metadata); + if (ret != OPAL_SUCCESS) { + pr_err("Failed to set kernel metadata tag!\n"); + err = -EPERM; + } + + /* + * Register boot memory top address with f/w. Should be retrieved + * by a kernel that intends to preserve crash'ed kernel's memory. + */ + ret = opal_mpipl_register_tag(OPAL_MPIPL_TAG_BOOT_MEM, + fadump_conf->boot_mem_top); + if (ret != OPAL_SUCCESS) { + pr_err("Failed to set boot memory tag!\n"); + err = -EPERM; + } + + return err; +} + +static u64 opal_fadump_get_bootmem_min(void) +{ + return OPAL_FADUMP_MIN_BOOT_MEM; +} + +static int opal_fadump_register(struct fw_dump *fadump_conf) +{ + s64 rc = OPAL_PARAMETER; + u16 registered_regs; + int i, err = -EIO; + + registered_regs = be16_to_cpu(opal_fdm->registered_regions); + for (i = 0; i < be16_to_cpu(opal_fdm->region_cnt); i++) { + rc = opal_mpipl_update(OPAL_MPIPL_ADD_RANGE, + be64_to_cpu(opal_fdm->rgn[i].src), + be64_to_cpu(opal_fdm->rgn[i].dest), + be64_to_cpu(opal_fdm->rgn[i].size)); + if (rc != OPAL_SUCCESS) + break; + + registered_regs++; + } + opal_fdm->registered_regions = cpu_to_be16(registered_regs); + + switch (rc) { + case OPAL_SUCCESS: + pr_info("Registration is successful!\n"); + fadump_conf->dump_registered = 1; + err = 0; + break; + case OPAL_RESOURCE: + /* If MAX regions limit in f/w is hit, warn and proceed. */ + pr_warn("%d regions could not be registered for MPIPL as MAX limit is reached!\n", + (be16_to_cpu(opal_fdm->region_cnt) - + be16_to_cpu(opal_fdm->registered_regions))); + fadump_conf->dump_registered = 1; + err = 0; + break; + case OPAL_PARAMETER: + pr_err("Failed to register. Parameter Error(%lld).\n", rc); + break; + case OPAL_HARDWARE: + pr_err("Support not available.\n"); + fadump_conf->fadump_supported = 0; + fadump_conf->fadump_enabled = 0; + break; + default: + pr_err("Failed to register. Unknown Error(%lld).\n", rc); + break; + } + + /* + * If some regions were registered before OPAL_MPIPL_ADD_RANGE + * OPAL call failed, unregister all regions. + */ + if ((err < 0) && (be16_to_cpu(opal_fdm->registered_regions) > 0)) + opal_fadump_unregister(fadump_conf); + + return err; +} + +static int opal_fadump_unregister(struct fw_dump *fadump_conf) +{ + s64 rc; + + rc = opal_mpipl_update(OPAL_MPIPL_REMOVE_ALL, 0, 0, 0); + if (rc) { + pr_err("Failed to un-register - unexpected Error(%lld).\n", rc); + return -EIO; + } + + opal_fdm->registered_regions = cpu_to_be16(0); + fadump_conf->dump_registered = 0; + return 0; +} + +static int opal_fadump_invalidate(struct fw_dump *fadump_conf) +{ + s64 rc; + + rc = opal_mpipl_update(OPAL_MPIPL_FREE_PRESERVED_MEMORY, 0, 0, 0); + if (rc) { + pr_err("Failed to invalidate - unexpected Error(%lld).\n", rc); + return -EIO; + } + + fadump_conf->dump_active = 0; + opal_fdm_active = NULL; + return 0; +} + +static void opal_fadump_cleanup(struct fw_dump *fadump_conf) +{ + s64 ret; + + ret = opal_mpipl_register_tag(OPAL_MPIPL_TAG_KERNEL, 0); + if (ret != OPAL_SUCCESS) + pr_warn("Could not reset (%llu) kernel metadata tag!\n", ret); +} + +/* + * Verify if CPU state data is available. If available, do a bit of sanity + * checking before processing this data. + */ +static bool __init is_opal_fadump_cpu_data_valid(struct fw_dump *fadump_conf) +{ + if (!opal_cpu_metadata) + return false; + + fadump_conf->cpu_state_data_version = + be32_to_cpu(opal_cpu_metadata->cpu_data_version); + fadump_conf->cpu_state_entry_size = + be32_to_cpu(opal_cpu_metadata->cpu_data_size); + fadump_conf->cpu_state_dest_vaddr = + (u64)__va(be64_to_cpu(opal_cpu_metadata->region[0].dest)); + fadump_conf->cpu_state_data_size = + be64_to_cpu(opal_cpu_metadata->region[0].size); + + if (fadump_conf->cpu_state_data_version != HDAT_FADUMP_CPU_DATA_VER) { + pr_warn("Supported CPU state data version: %u, found: %d!\n", + HDAT_FADUMP_CPU_DATA_VER, + fadump_conf->cpu_state_data_version); + pr_warn("WARNING: F/W using newer CPU state data format!!\n"); + } + + if ((fadump_conf->cpu_state_dest_vaddr == 0) || + (fadump_conf->cpu_state_entry_size == 0) || + (fadump_conf->cpu_state_entry_size > + fadump_conf->cpu_state_data_size)) { + pr_err("CPU state data is invalid. Ignoring!\n"); + return false; + } + + return true; +} + +/* + * Convert CPU state data saved at the time of crash into ELF notes. + * + * While the crashing CPU's register data is saved by the kernel, CPU state + * data for all CPUs is saved by f/w. In CPU state data provided by f/w, + * each register entry is of 16 bytes, a numerical identifier along with + * a GPR/SPR flag in the first 8 bytes and the register value in the next + * 8 bytes. For more details refer to F/W documentation. If this data is + * missing or in unsupported format, append crashing CPU's register data + * saved by the kernel in the PT_NOTE, to have something to work with in + * the vmcore file. + */ +static int __init +opal_fadump_build_cpu_notes(struct fw_dump *fadump_conf, + struct fadump_crash_info_header *fdh) +{ + u32 thread_pir, size_per_thread, regs_offset, regs_cnt, reg_esize; + struct hdat_fadump_thread_hdr *thdr; + bool is_cpu_data_valid = false; + u32 num_cpus = 1, *note_buf; + struct pt_regs regs; + char *bufp; + int rc, i; + + if (is_opal_fadump_cpu_data_valid(fadump_conf)) { + size_per_thread = fadump_conf->cpu_state_entry_size; + num_cpus = (fadump_conf->cpu_state_data_size / size_per_thread); + bufp = __va(fadump_conf->cpu_state_dest_vaddr); + is_cpu_data_valid = true; + } + + rc = fadump_setup_cpu_notes_buf(num_cpus); + if (rc != 0) + return rc; + + note_buf = (u32 *)fadump_conf->cpu_notes_buf_vaddr; + if (!is_cpu_data_valid) + goto out; + + /* + * Offset for register entries, entry size and registers count is + * duplicated in every thread header in keeping with HDAT format. + * Use these values from the first thread header. + */ + thdr = (struct hdat_fadump_thread_hdr *)bufp; + regs_offset = (offsetof(struct hdat_fadump_thread_hdr, offset) + + be32_to_cpu(thdr->offset)); + reg_esize = be32_to_cpu(thdr->esize); + regs_cnt = be32_to_cpu(thdr->ecnt); + + pr_debug("--------CPU State Data------------\n"); + pr_debug("NumCpus : %u\n", num_cpus); + pr_debug("\tOffset: %u, Entry size: %u, Cnt: %u\n", + regs_offset, reg_esize, regs_cnt); + + for (i = 0; i < num_cpus; i++, bufp += size_per_thread) { + thdr = (struct hdat_fadump_thread_hdr *)bufp; + + thread_pir = be32_to_cpu(thdr->pir); + pr_debug("[%04d] PIR: 0x%x, core state: 0x%02x\n", + i, thread_pir, thdr->core_state); + + /* + * If this is kernel initiated crash, crashing_cpu would be set + * appropriately and register data of the crashing CPU saved by + * crashing kernel. Add this saved register data of crashing CPU + * to elf notes and populate the pt_regs for the remaining CPUs + * from register state data provided by firmware. + */ + if (fdh->crashing_cpu == thread_pir) { + note_buf = fadump_regs_to_elf_notes(note_buf, + &fdh->regs); + pr_debug("Crashing CPU PIR: 0x%x - R1 : 0x%lx, NIP : 0x%lx\n", + fdh->crashing_cpu, fdh->regs.gpr[1], + fdh->regs.nip); + continue; + } + + /* + * Register state data of MAX cores is provided by firmware, + * but some of this cores may not be active. So, while + * processing register state data, check core state and + * skip threads that belong to inactive cores. + */ + if (thdr->core_state == HDAT_FADUMP_CORE_INACTIVE) + continue; + + opal_fadump_read_regs((bufp + regs_offset), regs_cnt, + reg_esize, true, ®s); + note_buf = fadump_regs_to_elf_notes(note_buf, ®s); + pr_debug("CPU PIR: 0x%x - R1 : 0x%lx, NIP : 0x%lx\n", + thread_pir, regs.gpr[1], regs.nip); + } + +out: + /* + * CPU state data is invalid/unsupported. Try appending crashing CPU's + * register data, if it is saved by the kernel. + */ + if (fadump_conf->cpu_notes_buf_vaddr == (u64)note_buf) { + if (fdh->crashing_cpu == FADUMP_CPU_UNKNOWN) { + fadump_free_cpu_notes_buf(); + return -ENODEV; + } + + pr_warn("WARNING: appending only crashing CPU's register data\n"); + note_buf = fadump_regs_to_elf_notes(note_buf, &(fdh->regs)); + } + + final_note(note_buf); + + pr_debug("Updating elfcore header (%llx) with cpu notes\n", + fdh->elfcorehdr_addr); + fadump_update_elfcore_header(__va(fdh->elfcorehdr_addr)); + return 0; +} + +static int __init opal_fadump_process(struct fw_dump *fadump_conf) +{ + struct fadump_crash_info_header *fdh; + int rc = -EINVAL; + + if (!opal_fdm_active || !fadump_conf->fadumphdr_addr) + return rc; + + /* Validate the fadump crash info header */ + fdh = __va(fadump_conf->fadumphdr_addr); + if (fdh->magic_number != FADUMP_CRASH_INFO_MAGIC) { + pr_err("Crash info header is not valid.\n"); + return rc; + } + +#ifdef CONFIG_OPAL_CORE + /* + * If this is a kernel initiated crash, crashing_cpu would be set + * appropriately and register data of the crashing CPU saved by + * crashing kernel. Add this saved register data of crashing CPU + * to elf notes and populate the pt_regs for the remaining CPUs + * from register state data provided by firmware. + */ + if (fdh->crashing_cpu != FADUMP_CPU_UNKNOWN) + kernel_initiated = true; +#endif + + rc = opal_fadump_build_cpu_notes(fadump_conf, fdh); + if (rc) + return rc; + + /* + * We are done validating dump info and elfcore header is now ready + * to be exported. set elfcorehdr_addr so that vmcore module will + * export the elfcore header through '/proc/vmcore'. + */ + elfcorehdr_addr = fdh->elfcorehdr_addr; + + return rc; +} + +static void opal_fadump_region_show(struct fw_dump *fadump_conf, + struct seq_file *m) +{ + const struct opal_fadump_mem_struct *fdm_ptr; + u64 dumped_bytes = 0; + int i; + + if (fadump_conf->dump_active) + fdm_ptr = opal_fdm_active; + else + fdm_ptr = opal_fdm; + + for (i = 0; i < be16_to_cpu(fdm_ptr->region_cnt); i++) { + /* + * Only regions that are registered for MPIPL + * would have dump data. + */ + if ((fadump_conf->dump_active) && + (i < be16_to_cpu(fdm_ptr->registered_regions))) + dumped_bytes = be64_to_cpu(fdm_ptr->rgn[i].size); + + seq_printf(m, "DUMP: Src: %#016llx, Dest: %#016llx, ", + be64_to_cpu(fdm_ptr->rgn[i].src), + be64_to_cpu(fdm_ptr->rgn[i].dest)); + seq_printf(m, "Size: %#llx, Dumped: %#llx bytes\n", + be64_to_cpu(fdm_ptr->rgn[i].size), dumped_bytes); + } + + /* Dump is active. Show reserved area start address. */ + if (fadump_conf->dump_active) { + seq_printf(m, "\nMemory above %#016lx is reserved for saving crash dump\n", + fadump_conf->reserve_dump_area_start); + } +} + +static void opal_fadump_trigger(struct fadump_crash_info_header *fdh, + const char *msg) +{ + int rc; + + /* + * Unlike on pSeries platform, logical CPU number is not provided + * with architected register state data. So, store the crashing + * CPU's PIR instead to plug the appropriate register data for + * crashing CPU in the vmcore file. + */ + fdh->crashing_cpu = (u32)mfspr(SPRN_PIR); + + rc = opal_cec_reboot2(OPAL_REBOOT_MPIPL, msg); + if (rc == OPAL_UNSUPPORTED) { + pr_emerg("Reboot type %d not supported.\n", + OPAL_REBOOT_MPIPL); + } else if (rc == OPAL_HARDWARE) + pr_emerg("No backend support for MPIPL!\n"); +} + +static struct fadump_ops opal_fadump_ops = { + .fadump_init_mem_struct = opal_fadump_init_mem_struct, + .fadump_get_metadata_size = opal_fadump_get_metadata_size, + .fadump_setup_metadata = opal_fadump_setup_metadata, + .fadump_get_bootmem_min = opal_fadump_get_bootmem_min, + .fadump_register = opal_fadump_register, + .fadump_unregister = opal_fadump_unregister, + .fadump_invalidate = opal_fadump_invalidate, + .fadump_cleanup = opal_fadump_cleanup, + .fadump_process = opal_fadump_process, + .fadump_region_show = opal_fadump_region_show, + .fadump_trigger = opal_fadump_trigger, +}; + +void __init opal_fadump_dt_scan(struct fw_dump *fadump_conf, u64 node) +{ + const __be32 *prop; + unsigned long dn; + __be64 be_addr; + u64 addr = 0; + int i, len; + s64 ret; + + /* + * Check if Firmware-Assisted Dump is supported. if yes, check + * if dump has been initiated on last reboot. + */ + dn = of_get_flat_dt_subnode_by_name(node, "dump"); + if (dn == -FDT_ERR_NOTFOUND) { + pr_debug("FADump support is missing!\n"); + return; + } + + if (!of_flat_dt_is_compatible(dn, "ibm,opal-dump")) { + pr_err("Support missing for this f/w version!\n"); + return; + } + + prop = of_get_flat_dt_prop(dn, "fw-load-area", &len); + if (prop) { + /* + * Each f/w load area is an (address,size) pair, + * 2 cells each, totalling 4 cells per range. + */ + for (i = 0; i < len / (sizeof(*prop) * 4); i++) { + u64 base, end; + + base = of_read_number(prop + (i * 4) + 0, 2); + end = base; + end += of_read_number(prop + (i * 4) + 2, 2); + if (end > OPAL_FADUMP_MIN_BOOT_MEM) { + pr_err("F/W load area: 0x%llx-0x%llx\n", + base, end); + pr_err("F/W version not supported!\n"); + return; + } + } + } + + fadump_conf->ops = &opal_fadump_ops; + fadump_conf->fadump_supported = 1; + + /* + * Firmware supports 32-bit field for size. Align it to PAGE_SIZE + * and request firmware to copy multiple kernel boot memory regions. + */ + fadump_conf->max_copy_size = ALIGN_DOWN(U32_MAX, PAGE_SIZE); + + /* + * Check if dump has been initiated on last reboot. + */ + prop = of_get_flat_dt_prop(dn, "mpipl-boot", NULL); + if (!prop) + return; + + ret = opal_mpipl_query_tag(OPAL_MPIPL_TAG_KERNEL, &be_addr); + if ((ret != OPAL_SUCCESS) || !be_addr) { + pr_err("Failed to get Kernel metadata (%lld)\n", ret); + return; + } + + addr = be64_to_cpu(be_addr); + pr_debug("Kernel metadata addr: %llx\n", addr); + + opal_fdm_active = __va(addr); + if (opal_fdm_active->version != OPAL_FADUMP_VERSION) { + pr_warn("Supported kernel metadata version: %u, found: %d!\n", + OPAL_FADUMP_VERSION, opal_fdm_active->version); + pr_warn("WARNING: Kernel metadata format mismatch identified! Core file maybe corrupted..\n"); + } + + /* Kernel regions not registered with f/w for MPIPL */ + if (be16_to_cpu(opal_fdm_active->registered_regions) == 0) { + opal_fdm_active = NULL; + return; + } + + ret = opal_mpipl_query_tag(OPAL_MPIPL_TAG_CPU, &be_addr); + if (be_addr) { + addr = be64_to_cpu(be_addr); + pr_debug("CPU metadata addr: %llx\n", addr); + opal_cpu_metadata = __va(addr); + } + + pr_info("Firmware-assisted dump is active.\n"); + fadump_conf->dump_active = 1; + opal_fadump_get_config(fadump_conf, opal_fdm_active); +} +#endif /* !CONFIG_PRESERVE_FA_DUMP */ |