diff options
Diffstat (limited to 'arch/powerpc/platforms/powernv/pci.h')
-rw-r--r-- | arch/powerpc/platforms/powernv/pci.h | 364 |
1 files changed, 364 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h new file mode 100644 index 000000000..739a0b3b7 --- /dev/null +++ b/arch/powerpc/platforms/powernv/pci.h @@ -0,0 +1,364 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __POWERNV_PCI_H +#define __POWERNV_PCI_H + +#include <linux/compiler.h> /* for __printf */ +#include <linux/iommu.h> +#include <asm/iommu.h> +#include <asm/msi_bitmap.h> + +struct pci_dn; + +enum pnv_phb_type { + PNV_PHB_IODA1 = 0, + PNV_PHB_IODA2 = 1, + PNV_PHB_NPU_NVLINK = 2, + PNV_PHB_NPU_OCAPI = 3, +}; + +/* Precise PHB model for error management */ +enum pnv_phb_model { + PNV_PHB_MODEL_UNKNOWN, + PNV_PHB_MODEL_P7IOC, + PNV_PHB_MODEL_PHB3, + PNV_PHB_MODEL_NPU, + PNV_PHB_MODEL_NPU2, +}; + +#define PNV_PCI_DIAG_BUF_SIZE 8192 +#define PNV_IODA_PE_DEV (1 << 0) /* PE has single PCI device */ +#define PNV_IODA_PE_BUS (1 << 1) /* PE has primary PCI bus */ +#define PNV_IODA_PE_BUS_ALL (1 << 2) /* PE has subordinate buses */ +#define PNV_IODA_PE_MASTER (1 << 3) /* Master PE in compound case */ +#define PNV_IODA_PE_SLAVE (1 << 4) /* Slave PE in compound case */ +#define PNV_IODA_PE_VF (1 << 5) /* PE for one VF */ + +/* + * A brief note on PNV_IODA_PE_BUS_ALL + * + * This is needed because of the behaviour of PCIe-to-PCI bridges. The PHB uses + * the Requester ID field of the PCIe request header to determine the device + * (and PE) that initiated a DMA. In legacy PCI individual memory read/write + * requests aren't tagged with the RID. To work around this the PCIe-to-PCI + * bridge will use (secondary_bus_no << 8) | 0x00 as the RID on the PCIe side. + * + * PCIe-to-X bridges have a similar issue even though PCI-X requests also have + * a RID in the transaction header. The PCIe-to-X bridge is permitted to "take + * ownership" of a transaction by a PCI-X device when forwarding it to the PCIe + * side of the bridge. + * + * To work around these problems we use the BUS_ALL flag since every subordinate + * bus of the bridge should go into the same PE. + */ + +/* Indicates operations are frozen for a PE: MMIO in PESTA & DMA in PESTB. */ +#define PNV_IODA_STOPPED_STATE 0x8000000000000000 + +/* Data associated with a PE, including IOMMU tracking etc.. */ +struct pnv_phb; +struct pnv_ioda_pe { + unsigned long flags; + struct pnv_phb *phb; + int device_count; + + /* A PE can be associated with a single device or an + * entire bus (& children). In the former case, pdev + * is populated, in the later case, pbus is. + */ +#ifdef CONFIG_PCI_IOV + struct pci_dev *parent_dev; +#endif + struct pci_dev *pdev; + struct pci_bus *pbus; + + /* Effective RID (device RID for a device PE and base bus + * RID with devfn 0 for a bus PE) + */ + unsigned int rid; + + /* PE number */ + unsigned int pe_number; + + /* "Base" iommu table, ie, 4K TCEs, 32-bit DMA */ + struct iommu_table_group table_group; + struct npu_comp *npucomp; + + /* 64-bit TCE bypass region */ + bool tce_bypass_enabled; + uint64_t tce_bypass_base; + + /* + * Used to track whether we've done DMA setup for this PE or not. We + * want to defer allocating TCE tables, etc until we've added a + * non-bridge device to the PE. + */ + bool dma_setup_done; + + /* MSIs. MVE index is identical for 32 and 64 bit MSI + * and -1 if not supported. (It's actually identical to the + * PE number) + */ + int mve_number; + + /* PEs in compound case */ + struct pnv_ioda_pe *master; + struct list_head slaves; + + /* Link in list of PE#s */ + struct list_head list; +}; + +#define PNV_PHB_FLAG_EEH (1 << 0) + +struct pnv_phb { + struct pci_controller *hose; + enum pnv_phb_type type; + enum pnv_phb_model model; + u64 hub_id; + u64 opal_id; + int flags; + void __iomem *regs; + u64 regs_phys; + int initialized; + spinlock_t lock; + +#ifdef CONFIG_DEBUG_FS + int has_dbgfs; + struct dentry *dbgfs; +#endif + + unsigned int msi_base; + unsigned int msi32_support; + struct msi_bitmap msi_bmp; + int (*msi_setup)(struct pnv_phb *phb, struct pci_dev *dev, + unsigned int hwirq, unsigned int virq, + unsigned int is_64, struct msi_msg *msg); + int (*init_m64)(struct pnv_phb *phb); + int (*get_pe_state)(struct pnv_phb *phb, int pe_no); + void (*freeze_pe)(struct pnv_phb *phb, int pe_no); + int (*unfreeze_pe)(struct pnv_phb *phb, int pe_no, int opt); + + struct { + /* Global bridge info */ + unsigned int total_pe_num; + unsigned int reserved_pe_idx; + unsigned int root_pe_idx; + + /* 32-bit MMIO window */ + unsigned int m32_size; + unsigned int m32_segsize; + unsigned int m32_pci_base; + + /* 64-bit MMIO window */ + unsigned int m64_bar_idx; + unsigned long m64_size; + unsigned long m64_segsize; + unsigned long m64_base; +#define MAX_M64_BARS 64 + unsigned long m64_bar_alloc; + + /* IO ports */ + unsigned int io_size; + unsigned int io_segsize; + unsigned int io_pci_base; + + /* PE allocation */ + struct mutex pe_alloc_mutex; + unsigned long *pe_alloc; + struct pnv_ioda_pe *pe_array; + + /* M32 & IO segment maps */ + unsigned int *m64_segmap; + unsigned int *m32_segmap; + unsigned int *io_segmap; + + /* DMA32 segment maps - IODA1 only */ + unsigned int dma32_count; + unsigned int *dma32_segmap; + + /* IRQ chip */ + int irq_chip_init; + struct irq_chip irq_chip; + + /* Sorted list of used PE's based + * on the sequence of creation + */ + struct list_head pe_list; + struct mutex pe_list_mutex; + + /* Reverse map of PEs, indexed by {bus, devfn} */ + unsigned int pe_rmap[0x10000]; + } ioda; + + /* PHB and hub diagnostics */ + unsigned int diag_data_size; + u8 *diag_data; +}; + + +/* IODA PE management */ + +static inline bool pnv_pci_is_m64(struct pnv_phb *phb, struct resource *r) +{ + /* + * WARNING: We cannot rely on the resource flags. The Linux PCI + * allocation code sometimes decides to put a 64-bit prefetchable + * BAR in the 32-bit window, so we have to compare the addresses. + * + * For simplicity we only test resource start. + */ + return (r->start >= phb->ioda.m64_base && + r->start < (phb->ioda.m64_base + phb->ioda.m64_size)); +} + +static inline bool pnv_pci_is_m64_flags(unsigned long resource_flags) +{ + unsigned long flags = (IORESOURCE_MEM_64 | IORESOURCE_PREFETCH); + + return (resource_flags & flags) == flags; +} + +int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe); +int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe); + +void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe); +void pnv_pci_ioda2_release_pe_dma(struct pnv_ioda_pe *pe); + +struct pnv_ioda_pe *pnv_ioda_alloc_pe(struct pnv_phb *phb, int count); +void pnv_ioda_free_pe(struct pnv_ioda_pe *pe); + +#ifdef CONFIG_PCI_IOV +/* + * For SR-IOV we want to put each VF's MMIO resource in to a separate PE. + * This requires a bit of acrobatics with the MMIO -> PE configuration + * and this structure is used to keep track of it all. + */ +struct pnv_iov_data { + /* number of VFs enabled */ + u16 num_vfs; + + /* pointer to the array of VF PEs. num_vfs long*/ + struct pnv_ioda_pe *vf_pe_arr; + + /* Did we map the VF BAR with single-PE IODA BARs? */ + bool m64_single_mode[PCI_SRIOV_NUM_BARS]; + + /* + * True if we're using any segmented windows. In that case we need + * shift the start of the IOV resource the segment corresponding to + * the allocated PE. + */ + bool need_shift; + + /* + * Bit mask used to track which m64 windows are used to map the + * SR-IOV BARs for this device. + */ + DECLARE_BITMAP(used_m64_bar_mask, MAX_M64_BARS); + + /* + * If we map the SR-IOV BARs with a segmented window then + * parts of that window will be "claimed" by other PEs. + * + * "holes" here is used to reserve the leading portion + * of the window that is used by other (non VF) PEs. + */ + struct resource holes[PCI_SRIOV_NUM_BARS]; +}; + +static inline struct pnv_iov_data *pnv_iov_get(struct pci_dev *pdev) +{ + return pdev->dev.archdata.iov_data; +} + +void pnv_pci_ioda_fixup_iov(struct pci_dev *pdev); +resource_size_t pnv_pci_iov_resource_alignment(struct pci_dev *pdev, int resno); + +int pnv_pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs); +int pnv_pcibios_sriov_disable(struct pci_dev *pdev); +#endif /* CONFIG_PCI_IOV */ + +extern struct pci_ops pnv_pci_ops; + +void pnv_pci_dump_phb_diag_data(struct pci_controller *hose, + unsigned char *log_buff); +int pnv_pci_cfg_read(struct pci_dn *pdn, + int where, int size, u32 *val); +int pnv_pci_cfg_write(struct pci_dn *pdn, + int where, int size, u32 val); +extern struct iommu_table *pnv_pci_table_alloc(int nid); + +extern void pnv_pci_init_ioda_hub(struct device_node *np); +extern void pnv_pci_init_ioda2_phb(struct device_node *np); +extern void pnv_pci_init_npu_phb(struct device_node *np); +extern void pnv_pci_init_npu2_opencapi_phb(struct device_node *np); +extern void pnv_npu2_map_lpar(struct pnv_ioda_pe *gpe, unsigned long msr); +extern void pnv_pci_reset_secondary_bus(struct pci_dev *dev); +extern int pnv_eeh_phb_reset(struct pci_controller *hose, int option); + +extern int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type); +extern void pnv_teardown_msi_irqs(struct pci_dev *pdev); +extern struct pnv_ioda_pe *pnv_pci_bdfn_to_pe(struct pnv_phb *phb, u16 bdfn); +extern struct pnv_ioda_pe *pnv_ioda_get_pe(struct pci_dev *dev); +extern void pnv_set_msi_irq_chip(struct pnv_phb *phb, unsigned int virq); +extern unsigned long pnv_pci_ioda2_get_table_size(__u32 page_shift, + __u64 window_size, __u32 levels); +extern int pnv_eeh_post_init(void); + +__printf(3, 4) +extern void pe_level_printk(const struct pnv_ioda_pe *pe, const char *level, + const char *fmt, ...); +#define pe_err(pe, fmt, ...) \ + pe_level_printk(pe, KERN_ERR, fmt, ##__VA_ARGS__) +#define pe_warn(pe, fmt, ...) \ + pe_level_printk(pe, KERN_WARNING, fmt, ##__VA_ARGS__) +#define pe_info(pe, fmt, ...) \ + pe_level_printk(pe, KERN_INFO, fmt, ##__VA_ARGS__) + +/* Nvlink functions */ +extern void pnv_npu_try_dma_set_bypass(struct pci_dev *gpdev, bool bypass); +extern void pnv_pci_ioda2_tce_invalidate_entire(struct pnv_phb *phb, bool rm); +extern void pnv_pci_npu_setup_iommu_groups(void); + +/* pci-ioda-tce.c */ +#define POWERNV_IOMMU_DEFAULT_LEVELS 2 +#define POWERNV_IOMMU_MAX_LEVELS 5 + +extern int pnv_tce_build(struct iommu_table *tbl, long index, long npages, + unsigned long uaddr, enum dma_data_direction direction, + unsigned long attrs); +extern void pnv_tce_free(struct iommu_table *tbl, long index, long npages); +extern int pnv_tce_xchg(struct iommu_table *tbl, long index, + unsigned long *hpa, enum dma_data_direction *direction, + bool alloc); +extern __be64 *pnv_tce_useraddrptr(struct iommu_table *tbl, long index, + bool alloc); +extern unsigned long pnv_tce_get(struct iommu_table *tbl, long index); + +extern long pnv_pci_ioda2_table_alloc_pages(int nid, __u64 bus_offset, + __u32 page_shift, __u64 window_size, __u32 levels, + bool alloc_userspace_copy, struct iommu_table *tbl); +extern void pnv_pci_ioda2_table_free_pages(struct iommu_table *tbl); + +extern long pnv_pci_link_table_and_group(int node, int num, + struct iommu_table *tbl, + struct iommu_table_group *table_group); +extern void pnv_pci_unlink_table_and_group(struct iommu_table *tbl, + struct iommu_table_group *table_group); +extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl, + void *tce_mem, u64 tce_size, + u64 dma_offset, unsigned int page_shift); + +extern unsigned long pnv_ioda_parse_tce_sizes(struct pnv_phb *phb); + +static inline struct pnv_phb *pci_bus_to_pnvhb(struct pci_bus *bus) +{ + struct pci_controller *hose = bus->sysdata; + + if (hose) + return hose->private_data; + + return NULL; +} + +#endif /* __POWERNV_PCI_H */ |