diff options
Diffstat (limited to 'arch/powerpc/platforms/pseries/setup.c')
| -rw-r--r-- | arch/powerpc/platforms/pseries/setup.c | 1080 |
1 files changed, 1080 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c new file mode 100644 index 000000000..822be2680 --- /dev/null +++ b/arch/powerpc/platforms/pseries/setup.c @@ -0,0 +1,1080 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * 64-bit pSeries and RS/6000 setup code. + * + * Copyright (C) 1995 Linus Torvalds + * Adapted from 'alpha' version by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu) + * Modified by PPC64 Team, IBM Corp + */ + +/* + * bootup setup stuff.. + */ + +#include <linux/cpu.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/user.h> +#include <linux/tty.h> +#include <linux/major.h> +#include <linux/interrupt.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/console.h> +#include <linux/pci.h> +#include <linux/utsname.h> +#include <linux/adb.h> +#include <linux/export.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/of.h> +#include <linux/of_pci.h> +#include <linux/memblock.h> +#include <linux/swiotlb.h> + +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/rtas.h> +#include <asm/pci-bridge.h> +#include <asm/iommu.h> +#include <asm/dma.h> +#include <asm/machdep.h> +#include <asm/irq.h> +#include <asm/time.h> +#include <asm/nvram.h> +#include <asm/pmc.h> +#include <asm/xics.h> +#include <asm/xive.h> +#include <asm/ppc-pci.h> +#include <asm/i8259.h> +#include <asm/udbg.h> +#include <asm/smp.h> +#include <asm/firmware.h> +#include <asm/eeh.h> +#include <asm/reg.h> +#include <asm/plpar_wrappers.h> +#include <asm/kexec.h> +#include <asm/isa-bridge.h> +#include <asm/security_features.h> +#include <asm/asm-const.h> +#include <asm/idle.h> +#include <asm/swiotlb.h> +#include <asm/svm.h> +#include <asm/dtl.h> + +#include "pseries.h" +#include "../../../../drivers/pci/pci.h" + +DEFINE_STATIC_KEY_FALSE(shared_processor); +EXPORT_SYMBOL(shared_processor); + +int CMO_PrPSP = -1; +int CMO_SecPSP = -1; +unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT_4K); +EXPORT_SYMBOL(CMO_PageSize); + +int fwnmi_active; /* TRUE if an FWNMI handler is present */ +int ibm_nmi_interlock_token; + +static void pSeries_show_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + const char *model = ""; + + root = of_find_node_by_path("/"); + if (root) + model = of_get_property(root, "model", NULL); + seq_printf(m, "machine\t\t: CHRP %s\n", model); + of_node_put(root); + if (radix_enabled()) + seq_printf(m, "MMU\t\t: Radix\n"); + else + seq_printf(m, "MMU\t\t: Hash\n"); +} + +/* Initialize firmware assisted non-maskable interrupts if + * the firmware supports this feature. + */ +static void __init fwnmi_init(void) +{ + unsigned long system_reset_addr, machine_check_addr; + u8 *mce_data_buf; + unsigned int i; + int nr_cpus = num_possible_cpus(); +#ifdef CONFIG_PPC_BOOK3S_64 + struct slb_entry *slb_ptr; + size_t size; +#endif + int ibm_nmi_register_token; + + ibm_nmi_register_token = rtas_token("ibm,nmi-register"); + if (ibm_nmi_register_token == RTAS_UNKNOWN_SERVICE) + return; + + ibm_nmi_interlock_token = rtas_token("ibm,nmi-interlock"); + if (WARN_ON(ibm_nmi_interlock_token == RTAS_UNKNOWN_SERVICE)) + return; + + /* If the kernel's not linked at zero we point the firmware at low + * addresses anyway, and use a trampoline to get to the real code. */ + system_reset_addr = __pa(system_reset_fwnmi) - PHYSICAL_START; + machine_check_addr = __pa(machine_check_fwnmi) - PHYSICAL_START; + + if (0 == rtas_call(ibm_nmi_register_token, 2, 1, NULL, + system_reset_addr, machine_check_addr)) + fwnmi_active = 1; + + /* + * Allocate a chunk for per cpu buffer to hold rtas errorlog. + * It will be used in real mode mce handler, hence it needs to be + * below RMA. + */ + mce_data_buf = memblock_alloc_try_nid_raw(RTAS_ERROR_LOG_MAX * nr_cpus, + RTAS_ERROR_LOG_MAX, MEMBLOCK_LOW_LIMIT, + ppc64_rma_size, NUMA_NO_NODE); + if (!mce_data_buf) + panic("Failed to allocate %d bytes below %pa for MCE buffer\n", + RTAS_ERROR_LOG_MAX * nr_cpus, &ppc64_rma_size); + + for_each_possible_cpu(i) { + paca_ptrs[i]->mce_data_buf = mce_data_buf + + (RTAS_ERROR_LOG_MAX * i); + } + +#ifdef CONFIG_PPC_BOOK3S_64 + if (!radix_enabled()) { + /* Allocate per cpu area to save old slb contents during MCE */ + size = sizeof(struct slb_entry) * mmu_slb_size * nr_cpus; + slb_ptr = memblock_alloc_try_nid_raw(size, + sizeof(struct slb_entry), MEMBLOCK_LOW_LIMIT, + ppc64_rma_size, NUMA_NO_NODE); + if (!slb_ptr) + panic("Failed to allocate %zu bytes below %pa for slb area\n", + size, &ppc64_rma_size); + + for_each_possible_cpu(i) + paca_ptrs[i]->mce_faulty_slbs = slb_ptr + (mmu_slb_size * i); + } +#endif +} + +static void pseries_8259_cascade(struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + unsigned int cascade_irq = i8259_irq(); + + if (cascade_irq) + generic_handle_irq(cascade_irq); + + chip->irq_eoi(&desc->irq_data); +} + +static void __init pseries_setup_i8259_cascade(void) +{ + struct device_node *np, *old, *found = NULL; + unsigned int cascade; + const u32 *addrp; + unsigned long intack = 0; + int naddr; + + for_each_node_by_type(np, "interrupt-controller") { + if (of_device_is_compatible(np, "chrp,iic")) { + found = np; + break; + } + } + + if (found == NULL) { + printk(KERN_DEBUG "pic: no ISA interrupt controller\n"); + return; + } + + cascade = irq_of_parse_and_map(found, 0); + if (!cascade) { + printk(KERN_ERR "pic: failed to map cascade interrupt"); + return; + } + pr_debug("pic: cascade mapped to irq %d\n", cascade); + + for (old = of_node_get(found); old != NULL ; old = np) { + np = of_get_parent(old); + of_node_put(old); + if (np == NULL) + break; + if (!of_node_name_eq(np, "pci")) + continue; + addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL); + if (addrp == NULL) + continue; + naddr = of_n_addr_cells(np); + intack = addrp[naddr-1]; + if (naddr > 1) + intack |= ((unsigned long)addrp[naddr-2]) << 32; + } + if (intack) + printk(KERN_DEBUG "pic: PCI 8259 intack at 0x%016lx\n", intack); + i8259_init(found, intack); + of_node_put(found); + irq_set_chained_handler(cascade, pseries_8259_cascade); +} + +static void __init pseries_init_irq(void) +{ + /* Try using a XIVE if available, otherwise use a XICS */ + if (!xive_spapr_init()) { + xics_init(); + pseries_setup_i8259_cascade(); + } +} + +static void pseries_lpar_enable_pmcs(void) +{ + unsigned long set, reset; + + set = 1UL << 63; + reset = 0; + plpar_hcall_norets(H_PERFMON, set, reset); +} + +static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *data) +{ + struct of_reconfig_data *rd = data; + struct device_node *parent, *np = rd->dn; + struct pci_dn *pdn; + int err = NOTIFY_OK; + + switch (action) { + case OF_RECONFIG_ATTACH_NODE: + parent = of_get_parent(np); + pdn = parent ? PCI_DN(parent) : NULL; + if (pdn) + pci_add_device_node_info(pdn->phb, np); + + of_node_put(parent); + break; + case OF_RECONFIG_DETACH_NODE: + pdn = PCI_DN(np); + if (pdn) + list_del(&pdn->list); + break; + default: + err = NOTIFY_DONE; + break; + } + return err; +} + +static struct notifier_block pci_dn_reconfig_nb = { + .notifier_call = pci_dn_reconfig_notifier, +}; + +struct kmem_cache *dtl_cache; + +#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE +/* + * Allocate space for the dispatch trace log for all possible cpus + * and register the buffers with the hypervisor. This is used for + * computing time stolen by the hypervisor. + */ +static int alloc_dispatch_logs(void) +{ + if (!firmware_has_feature(FW_FEATURE_SPLPAR)) + return 0; + + if (!dtl_cache) + return 0; + + alloc_dtl_buffers(0); + + /* Register the DTL for the current (boot) cpu */ + register_dtl_buffer(smp_processor_id()); + + return 0; +} +#else /* !CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */ +static inline int alloc_dispatch_logs(void) +{ + return 0; +} +#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */ + +static int alloc_dispatch_log_kmem_cache(void) +{ + void (*ctor)(void *) = get_dtl_cache_ctor(); + + dtl_cache = kmem_cache_create("dtl", DISPATCH_LOG_BYTES, + DISPATCH_LOG_BYTES, 0, ctor); + if (!dtl_cache) { + pr_warn("Failed to create dispatch trace log buffer cache\n"); + pr_warn("Stolen time statistics will be unreliable\n"); + return 0; + } + + return alloc_dispatch_logs(); +} +machine_early_initcall(pseries, alloc_dispatch_log_kmem_cache); + +DEFINE_PER_CPU(u64, idle_spurr_cycles); +DEFINE_PER_CPU(u64, idle_entry_purr_snap); +DEFINE_PER_CPU(u64, idle_entry_spurr_snap); +static void pseries_lpar_idle(void) +{ + /* + * Default handler to go into low thread priority and possibly + * low power mode by ceding processor to hypervisor + */ + + if (!prep_irq_for_idle()) + return; + + /* Indicate to hypervisor that we are idle. */ + pseries_idle_prolog(); + + /* + * Yield the processor to the hypervisor. We return if + * an external interrupt occurs (which are driven prior + * to returning here) or if a prod occurs from another + * processor. When returning here, external interrupts + * are enabled. + */ + cede_processor(); + + pseries_idle_epilog(); +} + +/* + * Enable relocation on during exceptions. This has partition wide scope and + * may take a while to complete, if it takes longer than one second we will + * just give up rather than wasting any more time on this - if that turns out + * to ever be a problem in practice we can move this into a kernel thread to + * finish off the process later in boot. + */ +bool pseries_enable_reloc_on_exc(void) +{ + long rc; + unsigned int delay, total_delay = 0; + + while (1) { + rc = enable_reloc_on_exceptions(); + if (!H_IS_LONG_BUSY(rc)) { + if (rc == H_P2) { + pr_info("Relocation on exceptions not" + " supported\n"); + return false; + } else if (rc != H_SUCCESS) { + pr_warn("Unable to enable relocation" + " on exceptions: %ld\n", rc); + return false; + } + return true; + } + + delay = get_longbusy_msecs(rc); + total_delay += delay; + if (total_delay > 1000) { + pr_warn("Warning: Giving up waiting to enable " + "relocation on exceptions (%u msec)!\n", + total_delay); + return false; + } + + mdelay(delay); + } +} +EXPORT_SYMBOL(pseries_enable_reloc_on_exc); + +void pseries_disable_reloc_on_exc(void) +{ + long rc; + + while (1) { + rc = disable_reloc_on_exceptions(); + if (!H_IS_LONG_BUSY(rc)) + break; + mdelay(get_longbusy_msecs(rc)); + } + if (rc != H_SUCCESS) + pr_warn("Warning: Failed to disable relocation on exceptions: %ld\n", + rc); +} +EXPORT_SYMBOL(pseries_disable_reloc_on_exc); + +#ifdef CONFIG_KEXEC_CORE +static void pSeries_machine_kexec(struct kimage *image) +{ + if (firmware_has_feature(FW_FEATURE_SET_MODE)) + pseries_disable_reloc_on_exc(); + + default_machine_kexec(image); +} +#endif + +#ifdef __LITTLE_ENDIAN__ +void pseries_big_endian_exceptions(void) +{ + long rc; + + while (1) { + rc = enable_big_endian_exceptions(); + if (!H_IS_LONG_BUSY(rc)) + break; + mdelay(get_longbusy_msecs(rc)); + } + + /* + * At this point it is unlikely panic() will get anything + * out to the user, since this is called very late in kexec + * but at least this will stop us from continuing on further + * and creating an even more difficult to debug situation. + * + * There is a known problem when kdump'ing, if cpus are offline + * the above call will fail. Rather than panicking again, keep + * going and hope the kdump kernel is also little endian, which + * it usually is. + */ + if (rc && !kdump_in_progress()) + panic("Could not enable big endian exceptions"); +} + +void pseries_little_endian_exceptions(void) +{ + long rc; + + while (1) { + rc = enable_little_endian_exceptions(); + if (!H_IS_LONG_BUSY(rc)) + break; + mdelay(get_longbusy_msecs(rc)); + } + if (rc) { + ppc_md.progress("H_SET_MODE LE exception fail", 0); + panic("Could not enable little endian exceptions"); + } +} +#endif + +static void __init find_and_init_phbs(void) +{ + struct device_node *node; + struct pci_controller *phb; + struct device_node *root = of_find_node_by_path("/"); + + for_each_child_of_node(root, node) { + if (!of_node_is_type(node, "pci") && + !of_node_is_type(node, "pciex")) + continue; + + phb = pcibios_alloc_controller(node); + if (!phb) + continue; + rtas_setup_phb(phb); + pci_process_bridge_OF_ranges(phb, node, 0); + isa_bridge_find_early(phb); + phb->controller_ops = pseries_pci_controller_ops; + } + + of_node_put(root); + + /* + * PCI_PROBE_ONLY and PCI_REASSIGN_ALL_BUS can be set via properties + * in chosen. + */ + of_pci_check_probe_only(); +} + +static void init_cpu_char_feature_flags(struct h_cpu_char_result *result) +{ + /* + * The features below are disabled by default, so we instead look to see + * if firmware has *enabled* them, and set them if so. + */ + if (result->character & H_CPU_CHAR_SPEC_BAR_ORI31) + security_ftr_set(SEC_FTR_SPEC_BAR_ORI31); + + if (result->character & H_CPU_CHAR_BCCTRL_SERIALISED) + security_ftr_set(SEC_FTR_BCCTRL_SERIALISED); + + if (result->character & H_CPU_CHAR_L1D_FLUSH_ORI30) + security_ftr_set(SEC_FTR_L1D_FLUSH_ORI30); + + if (result->character & H_CPU_CHAR_L1D_FLUSH_TRIG2) + security_ftr_set(SEC_FTR_L1D_FLUSH_TRIG2); + + if (result->character & H_CPU_CHAR_L1D_THREAD_PRIV) + security_ftr_set(SEC_FTR_L1D_THREAD_PRIV); + + if (result->character & H_CPU_CHAR_COUNT_CACHE_DISABLED) + security_ftr_set(SEC_FTR_COUNT_CACHE_DISABLED); + + if (result->character & H_CPU_CHAR_BCCTR_FLUSH_ASSIST) + security_ftr_set(SEC_FTR_BCCTR_FLUSH_ASSIST); + + if (result->character & H_CPU_CHAR_BCCTR_LINK_FLUSH_ASSIST) + security_ftr_set(SEC_FTR_BCCTR_LINK_FLUSH_ASSIST); + + if (result->behaviour & H_CPU_BEHAV_FLUSH_COUNT_CACHE) + security_ftr_set(SEC_FTR_FLUSH_COUNT_CACHE); + + if (result->behaviour & H_CPU_BEHAV_FLUSH_LINK_STACK) + security_ftr_set(SEC_FTR_FLUSH_LINK_STACK); + + /* + * The features below are enabled by default, so we instead look to see + * if firmware has *disabled* them, and clear them if so. + */ + if (!(result->behaviour & H_CPU_BEHAV_FAVOUR_SECURITY)) + security_ftr_clear(SEC_FTR_FAVOUR_SECURITY); + + if (!(result->behaviour & H_CPU_BEHAV_L1D_FLUSH_PR)) + security_ftr_clear(SEC_FTR_L1D_FLUSH_PR); + + if (result->behaviour & H_CPU_BEHAV_NO_L1D_FLUSH_ENTRY) + security_ftr_clear(SEC_FTR_L1D_FLUSH_ENTRY); + + if (result->behaviour & H_CPU_BEHAV_NO_L1D_FLUSH_UACCESS) + security_ftr_clear(SEC_FTR_L1D_FLUSH_UACCESS); + + if (!(result->behaviour & H_CPU_BEHAV_BNDS_CHK_SPEC_BAR)) + security_ftr_clear(SEC_FTR_BNDS_CHK_SPEC_BAR); +} + +void pseries_setup_security_mitigations(void) +{ + struct h_cpu_char_result result; + enum l1d_flush_type types; + bool enable; + long rc; + + /* + * Set features to the defaults assumed by init_cpu_char_feature_flags() + * so it can set/clear again any features that might have changed after + * migration, and in case the hypercall fails and it is not even called. + */ + powerpc_security_features = SEC_FTR_DEFAULT; + + rc = plpar_get_cpu_characteristics(&result); + if (rc == H_SUCCESS) + init_cpu_char_feature_flags(&result); + + /* + * We're the guest so this doesn't apply to us, clear it to simplify + * handling of it elsewhere. + */ + security_ftr_clear(SEC_FTR_L1D_FLUSH_HV); + + types = L1D_FLUSH_FALLBACK; + + if (security_ftr_enabled(SEC_FTR_L1D_FLUSH_TRIG2)) + types |= L1D_FLUSH_MTTRIG; + + if (security_ftr_enabled(SEC_FTR_L1D_FLUSH_ORI30)) + types |= L1D_FLUSH_ORI; + + enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && \ + security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR); + + setup_rfi_flush(types, enable); + setup_count_cache_flush(); + + enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && + security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY); + setup_entry_flush(enable); + + enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && + security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS); + setup_uaccess_flush(enable); + + setup_stf_barrier(); +} + +#ifdef CONFIG_PCI_IOV +enum rtas_iov_fw_value_map { + NUM_RES_PROPERTY = 0, /* Number of Resources */ + LOW_INT = 1, /* Lowest 32 bits of Address */ + START_OF_ENTRIES = 2, /* Always start of entry */ + APERTURE_PROPERTY = 2, /* Start of entry+ to Aperture Size */ + WDW_SIZE_PROPERTY = 4, /* Start of entry+ to Window Size */ + NEXT_ENTRY = 7 /* Go to next entry on array */ +}; + +enum get_iov_fw_value_index { + BAR_ADDRS = 1, /* Get Bar Address */ + APERTURE_SIZE = 2, /* Get Aperture Size */ + WDW_SIZE = 3 /* Get Window Size */ +}; + +resource_size_t pseries_get_iov_fw_value(struct pci_dev *dev, int resno, + enum get_iov_fw_value_index value) +{ + const int *indexes; + struct device_node *dn = pci_device_to_OF_node(dev); + int i, num_res, ret = 0; + + indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL); + if (!indexes) + return 0; + + /* + * First element in the array is the number of Bars + * returned. Search through the list to find the matching + * bar + */ + num_res = of_read_number(&indexes[NUM_RES_PROPERTY], 1); + if (resno >= num_res) + return 0; /* or an errror */ + + i = START_OF_ENTRIES + NEXT_ENTRY * resno; + switch (value) { + case BAR_ADDRS: + ret = of_read_number(&indexes[i], 2); + break; + case APERTURE_SIZE: + ret = of_read_number(&indexes[i + APERTURE_PROPERTY], 2); + break; + case WDW_SIZE: + ret = of_read_number(&indexes[i + WDW_SIZE_PROPERTY], 2); + break; + } + + return ret; +} + +void of_pci_set_vf_bar_size(struct pci_dev *dev, const int *indexes) +{ + struct resource *res; + resource_size_t base, size; + int i, r, num_res; + + num_res = of_read_number(&indexes[NUM_RES_PROPERTY], 1); + num_res = min_t(int, num_res, PCI_SRIOV_NUM_BARS); + for (i = START_OF_ENTRIES, r = 0; r < num_res && r < PCI_SRIOV_NUM_BARS; + i += NEXT_ENTRY, r++) { + res = &dev->resource[r + PCI_IOV_RESOURCES]; + base = of_read_number(&indexes[i], 2); + size = of_read_number(&indexes[i + APERTURE_PROPERTY], 2); + res->flags = pci_parse_of_flags(of_read_number + (&indexes[i + LOW_INT], 1), 0); + res->flags |= (IORESOURCE_MEM_64 | IORESOURCE_PCI_FIXED); + res->name = pci_name(dev); + res->start = base; + res->end = base + size - 1; + } +} + +void of_pci_parse_iov_addrs(struct pci_dev *dev, const int *indexes) +{ + struct resource *res, *root, *conflict; + resource_size_t base, size; + int i, r, num_res; + + /* + * First element in the array is the number of Bars + * returned. Search through the list to find the matching + * bars assign them from firmware into resources structure. + */ + num_res = of_read_number(&indexes[NUM_RES_PROPERTY], 1); + for (i = START_OF_ENTRIES, r = 0; r < num_res && r < PCI_SRIOV_NUM_BARS; + i += NEXT_ENTRY, r++) { + res = &dev->resource[r + PCI_IOV_RESOURCES]; + base = of_read_number(&indexes[i], 2); + size = of_read_number(&indexes[i + WDW_SIZE_PROPERTY], 2); + res->name = pci_name(dev); + res->start = base; + res->end = base + size - 1; + root = &iomem_resource; + dev_dbg(&dev->dev, + "pSeries IOV BAR %d: trying firmware assignment %pR\n", + r + PCI_IOV_RESOURCES, res); + conflict = request_resource_conflict(root, res); + if (conflict) { + dev_info(&dev->dev, + "BAR %d: %pR conflicts with %s %pR\n", + r + PCI_IOV_RESOURCES, res, + conflict->name, conflict); + res->flags |= IORESOURCE_UNSET; + } + } +} + +static void pseries_disable_sriov_resources(struct pci_dev *pdev) +{ + int i; + + pci_warn(pdev, "No hypervisor support for SR-IOV on this device, IOV BARs disabled.\n"); + for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) + pdev->resource[i + PCI_IOV_RESOURCES].flags = 0; +} + +static void pseries_pci_fixup_resources(struct pci_dev *pdev) +{ + const int *indexes; + struct device_node *dn = pci_device_to_OF_node(pdev); + + /*Firmware must support open sriov otherwise dont configure*/ + indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL); + if (indexes) + of_pci_set_vf_bar_size(pdev, indexes); + else + pseries_disable_sriov_resources(pdev); +} + +static void pseries_pci_fixup_iov_resources(struct pci_dev *pdev) +{ + const int *indexes; + struct device_node *dn = pci_device_to_OF_node(pdev); + + if (!pdev->is_physfn || pci_dev_is_added(pdev)) + return; + /*Firmware must support open sriov otherwise dont configure*/ + indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL); + if (indexes) + of_pci_parse_iov_addrs(pdev, indexes); + else + pseries_disable_sriov_resources(pdev); +} + +static resource_size_t pseries_pci_iov_resource_alignment(struct pci_dev *pdev, + int resno) +{ + const __be32 *reg; + struct device_node *dn = pci_device_to_OF_node(pdev); + + /*Firmware must support open sriov otherwise report regular alignment*/ + reg = of_get_property(dn, "ibm,is-open-sriov-pf", NULL); + if (!reg) + return pci_iov_resource_size(pdev, resno); + + if (!pdev->is_physfn) + return 0; + return pseries_get_iov_fw_value(pdev, + resno - PCI_IOV_RESOURCES, + APERTURE_SIZE); +} +#endif + +static void __init pSeries_setup_arch(void) +{ + set_arch_panic_timeout(10, ARCH_PANIC_TIMEOUT); + + /* Discover PIC type and setup ppc_md accordingly */ + smp_init_pseries(); + + + if (radix_enabled() && !mmu_has_feature(MMU_FTR_GTSE)) + if (!firmware_has_feature(FW_FEATURE_RPT_INVALIDATE)) + panic("BUG: Radix support requires either GTSE or RPT_INVALIDATE\n"); + + + /* openpic global configuration register (64-bit format). */ + /* openpic Interrupt Source Unit pointer (64-bit format). */ + /* python0 facility area (mmio) (64-bit format) REAL address. */ + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000; + + fwnmi_init(); + + pseries_setup_security_mitigations(); + pseries_lpar_read_hblkrm_characteristics(); + + /* By default, only probe PCI (can be overridden by rtas_pci) */ + pci_add_flags(PCI_PROBE_ONLY); + + /* Find and initialize PCI host bridges */ + init_pci_config_tokens(); + find_and_init_phbs(); + of_reconfig_notifier_register(&pci_dn_reconfig_nb); + + pSeries_nvram_init(); + + if (firmware_has_feature(FW_FEATURE_LPAR)) { + vpa_init(boot_cpuid); + + if (lppaca_shared_proc()) { + static_branch_enable(&shared_processor); + pv_spinlocks_init(); + } + + ppc_md.power_save = pseries_lpar_idle; + ppc_md.enable_pmcs = pseries_lpar_enable_pmcs; +#ifdef CONFIG_PCI_IOV + ppc_md.pcibios_fixup_resources = + pseries_pci_fixup_resources; + ppc_md.pcibios_fixup_sriov = + pseries_pci_fixup_iov_resources; + ppc_md.pcibios_iov_resource_alignment = + pseries_pci_iov_resource_alignment; +#endif + } else { + /* No special idle routine */ + ppc_md.enable_pmcs = power4_enable_pmcs; + } + + ppc_md.pcibios_root_bridge_prepare = pseries_root_bridge_prepare; + + if (swiotlb_force == SWIOTLB_FORCE) + ppc_swiotlb_enable = 1; + + pseries_rng_init(); +} + +static void pseries_panic(char *str) +{ + panic_flush_kmsg_end(); + rtas_os_term(str); +} + +static int __init pSeries_init_panel(void) +{ + /* Manually leave the kernel version on the panel. */ +#ifdef __BIG_ENDIAN__ + ppc_md.progress("Linux ppc64\n", 0); +#else + ppc_md.progress("Linux ppc64le\n", 0); +#endif + ppc_md.progress(init_utsname()->version, 0); + + return 0; +} +machine_arch_initcall(pseries, pSeries_init_panel); + +static int pseries_set_dabr(unsigned long dabr, unsigned long dabrx) +{ + return plpar_hcall_norets(H_SET_DABR, dabr); +} + +static int pseries_set_xdabr(unsigned long dabr, unsigned long dabrx) +{ + /* Have to set at least one bit in the DABRX according to PAPR */ + if (dabrx == 0 && dabr == 0) + dabrx = DABRX_USER; + /* PAPR says we can only set kernel and user bits */ + dabrx &= DABRX_KERNEL | DABRX_USER; + + return plpar_hcall_norets(H_SET_XDABR, dabr, dabrx); +} + +static int pseries_set_dawr(int nr, unsigned long dawr, unsigned long dawrx) +{ + /* PAPR says we can't set HYP */ + dawrx &= ~DAWRX_HYP; + + if (nr == 0) + return plpar_set_watchpoint0(dawr, dawrx); + else + return plpar_set_watchpoint1(dawr, dawrx); +} + +#define CMO_CHARACTERISTICS_TOKEN 44 +#define CMO_MAXLENGTH 1026 + +void pSeries_coalesce_init(void) +{ + struct hvcall_mpp_x_data mpp_x_data; + + if (firmware_has_feature(FW_FEATURE_CMO) && !h_get_mpp_x(&mpp_x_data)) + powerpc_firmware_features |= FW_FEATURE_XCMO; + else + powerpc_firmware_features &= ~FW_FEATURE_XCMO; +} + +/** + * fw_cmo_feature_init - FW_FEATURE_CMO is not stored in ibm,hypertas-functions, + * handle that here. (Stolen from parse_system_parameter_string) + */ +static void pSeries_cmo_feature_init(void) +{ + char *ptr, *key, *value, *end; + int call_status; + int page_order = IOMMU_PAGE_SHIFT_4K; + + pr_debug(" -> fw_cmo_feature_init()\n"); + spin_lock(&rtas_data_buf_lock); + memset(rtas_data_buf, 0, RTAS_DATA_BUF_SIZE); + call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1, + NULL, + CMO_CHARACTERISTICS_TOKEN, + __pa(rtas_data_buf), + RTAS_DATA_BUF_SIZE); + + if (call_status != 0) { + spin_unlock(&rtas_data_buf_lock); + pr_debug("CMO not available\n"); + pr_debug(" <- fw_cmo_feature_init()\n"); + return; + } + + end = rtas_data_buf + CMO_MAXLENGTH - 2; + ptr = rtas_data_buf + 2; /* step over strlen value */ + key = value = ptr; + + while (*ptr && (ptr <= end)) { + /* Separate the key and value by replacing '=' with '\0' and + * point the value at the string after the '=' + */ + if (ptr[0] == '=') { + ptr[0] = '\0'; + value = ptr + 1; + } else if (ptr[0] == '\0' || ptr[0] == ',') { + /* Terminate the string containing the key/value pair */ + ptr[0] = '\0'; + + if (key == value) { + pr_debug("Malformed key/value pair\n"); + /* Never found a '=', end processing */ + break; + } + + if (0 == strcmp(key, "CMOPageSize")) + page_order = simple_strtol(value, NULL, 10); + else if (0 == strcmp(key, "PrPSP")) + CMO_PrPSP = simple_strtol(value, NULL, 10); + else if (0 == strcmp(key, "SecPSP")) + CMO_SecPSP = simple_strtol(value, NULL, 10); + value = key = ptr + 1; + } + ptr++; + } + + /* Page size is returned as the power of 2 of the page size, + * convert to the page size in bytes before returning + */ + CMO_PageSize = 1 << page_order; + pr_debug("CMO_PageSize = %lu\n", CMO_PageSize); + + if (CMO_PrPSP != -1 || CMO_SecPSP != -1) { + pr_info("CMO enabled\n"); + pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP, + CMO_SecPSP); + powerpc_firmware_features |= FW_FEATURE_CMO; + pSeries_coalesce_init(); + } else + pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP, + CMO_SecPSP); + spin_unlock(&rtas_data_buf_lock); + pr_debug(" <- fw_cmo_feature_init()\n"); +} + +/* + * Early initialization. Relocation is on but do not reference unbolted pages + */ +static void __init pseries_init(void) +{ + pr_debug(" -> pseries_init()\n"); + +#ifdef CONFIG_HVC_CONSOLE + if (firmware_has_feature(FW_FEATURE_LPAR)) + hvc_vio_init_early(); +#endif + if (firmware_has_feature(FW_FEATURE_XDABR)) + ppc_md.set_dabr = pseries_set_xdabr; + else if (firmware_has_feature(FW_FEATURE_DABR)) + ppc_md.set_dabr = pseries_set_dabr; + + if (firmware_has_feature(FW_FEATURE_SET_MODE)) + ppc_md.set_dawr = pseries_set_dawr; + + pSeries_cmo_feature_init(); + iommu_init_early_pSeries(); + + pr_debug(" <- pseries_init()\n"); +} + +/** + * pseries_power_off - tell firmware about how to power off the system. + * + * This function calls either the power-off rtas token in normal cases + * or the ibm,power-off-ups token (if present & requested) in case of + * a power failure. If power-off token is used, power on will only be + * possible with power button press. If ibm,power-off-ups token is used + * it will allow auto poweron after power is restored. + */ +static void pseries_power_off(void) +{ + int rc; + int rtas_poweroff_ups_token = rtas_token("ibm,power-off-ups"); + + if (rtas_flash_term_hook) + rtas_flash_term_hook(SYS_POWER_OFF); + + if (rtas_poweron_auto == 0 || + rtas_poweroff_ups_token == RTAS_UNKNOWN_SERVICE) { + rc = rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1); + printk(KERN_INFO "RTAS power-off returned %d\n", rc); + } else { + rc = rtas_call(rtas_poweroff_ups_token, 0, 1, NULL); + printk(KERN_INFO "RTAS ibm,power-off-ups returned %d\n", rc); + } + for (;;); +} + +static int __init pSeries_probe(void) +{ + if (!of_node_is_type(of_root, "chrp")) + return 0; + + /* Cell blades firmware claims to be chrp while it's not. Until this + * is fixed, we need to avoid those here. + */ + if (of_machine_is_compatible("IBM,CPBW-1.0") || + of_machine_is_compatible("IBM,CBEA")) + return 0; + + pm_power_off = pseries_power_off; + + pr_debug("Machine is%s LPAR !\n", + (powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not"); + + pseries_init(); + + return 1; +} + +static int pSeries_pci_probe_mode(struct pci_bus *bus) +{ + if (firmware_has_feature(FW_FEATURE_LPAR)) + return PCI_PROBE_DEVTREE; + return PCI_PROBE_NORMAL; +} + +struct pci_controller_ops pseries_pci_controller_ops = { + .probe_mode = pSeries_pci_probe_mode, +}; + +define_machine(pseries) { + .name = "pSeries", + .probe = pSeries_probe, + .setup_arch = pSeries_setup_arch, + .init_IRQ = pseries_init_irq, + .show_cpuinfo = pSeries_show_cpuinfo, + .log_error = pSeries_log_error, + .pcibios_fixup = pSeries_final_fixup, + .restart = rtas_restart, + .halt = rtas_halt, + .panic = pseries_panic, + .get_boot_time = rtas_get_boot_time, + .get_rtc_time = rtas_get_rtc_time, + .set_rtc_time = rtas_set_rtc_time, + .calibrate_decr = generic_calibrate_decr, + .progress = rtas_progress, + .system_reset_exception = pSeries_system_reset_exception, + .machine_check_early = pseries_machine_check_realmode, + .machine_check_exception = pSeries_machine_check_exception, +#ifdef CONFIG_KEXEC_CORE + .machine_kexec = pSeries_machine_kexec, + .kexec_cpu_down = pseries_kexec_cpu_down, +#endif +#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE + .memory_block_size = pseries_memory_block_size, +#endif +}; |