diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/sparc/kernel/entry.S | 1357 |
1 files changed, 1357 insertions, 0 deletions
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S new file mode 100644 index 000000000..d58940280 --- /dev/null +++ b/arch/sparc/kernel/entry.S @@ -0,0 +1,1357 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* arch/sparc/kernel/entry.S: Sparc trap low-level entry points. + * + * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net) + * Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be) + * Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx) + * Copyright (C) 1996-1999 Jakub Jelinek (jj@sunsite.mff.cuni.cz) + * Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au) + */ + +#include <linux/linkage.h> +#include <linux/errno.h> +#include <linux/pgtable.h> + +#include <asm/head.h> +#include <asm/asi.h> +#include <asm/smp.h> +#include <asm/contregs.h> +#include <asm/ptrace.h> +#include <asm/asm-offsets.h> +#include <asm/psr.h> +#include <asm/vaddrs.h> +#include <asm/page.h> +#include <asm/winmacro.h> +#include <asm/signal.h> +#include <asm/obio.h> +#include <asm/mxcc.h> +#include <asm/thread_info.h> +#include <asm/param.h> +#include <asm/unistd.h> + +#include <asm/asmmacro.h> +#include <asm/export.h> + +#define curptr g6 + +/* These are just handy. */ +#define _SV save %sp, -STACKFRAME_SZ, %sp +#define _RS restore + +#define FLUSH_ALL_KERNEL_WINDOWS \ + _SV; _SV; _SV; _SV; _SV; _SV; _SV; \ + _RS; _RS; _RS; _RS; _RS; _RS; _RS; + + .text + +#ifdef CONFIG_KGDB + .align 4 + .globl arch_kgdb_breakpoint + .type arch_kgdb_breakpoint,#function +arch_kgdb_breakpoint: + ta 0x7d + retl + nop + .size arch_kgdb_breakpoint,.-arch_kgdb_breakpoint +#endif + +#if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE) + .align 4 + .globl floppy_hardint +floppy_hardint: + /* + * This code cannot touch registers %l0 %l1 and %l2 + * because SAVE_ALL depends on their values. It depends + * on %l3 also, but we regenerate it before a call. + * Other registers are: + * %l3 -- base address of fdc registers + * %l4 -- pdma_vaddr + * %l5 -- scratch for ld/st address + * %l6 -- pdma_size + * %l7 -- scratch [floppy byte, ld/st address, aux. data] + */ + + /* Do we have work to do? */ + sethi %hi(doing_pdma), %l7 + ld [%l7 + %lo(doing_pdma)], %l7 + cmp %l7, 0 + be floppy_dosoftint + nop + + /* Load fdc register base */ + sethi %hi(fdc_status), %l3 + ld [%l3 + %lo(fdc_status)], %l3 + + /* Setup register addresses */ + sethi %hi(pdma_vaddr), %l5 ! transfer buffer + ld [%l5 + %lo(pdma_vaddr)], %l4 + sethi %hi(pdma_size), %l5 ! bytes to go + ld [%l5 + %lo(pdma_size)], %l6 +next_byte: + ldub [%l3], %l7 + + andcc %l7, 0x80, %g0 ! Does fifo still have data + bz floppy_fifo_emptied ! fifo has been emptied... + andcc %l7, 0x20, %g0 ! in non-dma mode still? + bz floppy_overrun ! nope, overrun + andcc %l7, 0x40, %g0 ! 0=write 1=read + bz floppy_write + sub %l6, 0x1, %l6 + + /* Ok, actually read this byte */ + ldub [%l3 + 1], %l7 + orcc %g0, %l6, %g0 + stb %l7, [%l4] + bne next_byte + add %l4, 0x1, %l4 + + b floppy_tdone + nop + +floppy_write: + /* Ok, actually write this byte */ + ldub [%l4], %l7 + orcc %g0, %l6, %g0 + stb %l7, [%l3 + 1] + bne next_byte + add %l4, 0x1, %l4 + + /* fall through... */ +floppy_tdone: + sethi %hi(pdma_vaddr), %l5 + st %l4, [%l5 + %lo(pdma_vaddr)] + sethi %hi(pdma_size), %l5 + st %l6, [%l5 + %lo(pdma_size)] + /* Flip terminal count pin */ + set auxio_register, %l7 + ld [%l7], %l7 + + ldub [%l7], %l5 + + or %l5, 0xc2, %l5 + stb %l5, [%l7] + andn %l5, 0x02, %l5 + +2: + /* Kill some time so the bits set */ + WRITE_PAUSE + WRITE_PAUSE + + stb %l5, [%l7] + + /* Prevent recursion */ + sethi %hi(doing_pdma), %l7 + b floppy_dosoftint + st %g0, [%l7 + %lo(doing_pdma)] + + /* We emptied the FIFO, but we haven't read everything + * as of yet. Store the current transfer address and + * bytes left to read so we can continue when the next + * fast IRQ comes in. + */ +floppy_fifo_emptied: + sethi %hi(pdma_vaddr), %l5 + st %l4, [%l5 + %lo(pdma_vaddr)] + sethi %hi(pdma_size), %l7 + st %l6, [%l7 + %lo(pdma_size)] + + /* Restore condition codes */ + wr %l0, 0x0, %psr + WRITE_PAUSE + + jmp %l1 + rett %l2 + +floppy_overrun: + sethi %hi(pdma_vaddr), %l5 + st %l4, [%l5 + %lo(pdma_vaddr)] + sethi %hi(pdma_size), %l5 + st %l6, [%l5 + %lo(pdma_size)] + /* Prevent recursion */ + sethi %hi(doing_pdma), %l7 + st %g0, [%l7 + %lo(doing_pdma)] + + /* fall through... */ +floppy_dosoftint: + rd %wim, %l3 + SAVE_ALL + + /* Set all IRQs off. */ + or %l0, PSR_PIL, %l4 + wr %l4, 0x0, %psr + WRITE_PAUSE + wr %l4, PSR_ET, %psr + WRITE_PAUSE + + mov 11, %o0 ! floppy irq level (unused anyway) + mov %g0, %o1 ! devid is not used in fast interrupts + call sparc_floppy_irq + add %sp, STACKFRAME_SZ, %o2 ! struct pt_regs *regs + + RESTORE_ALL + +#endif /* (CONFIG_BLK_DEV_FD) */ + + /* Bad trap handler */ + .globl bad_trap_handler +bad_trap_handler: + SAVE_ALL + + wr %l0, PSR_ET, %psr + WRITE_PAUSE + + add %sp, STACKFRAME_SZ, %o0 ! pt_regs + call do_hw_interrupt + mov %l7, %o1 ! trap number + + RESTORE_ALL + +/* For now all IRQ's not registered get sent here. handler_irq() will + * see if a routine is registered to handle this interrupt and if not + * it will say so on the console. + */ + + .align 4 + .globl real_irq_entry, patch_handler_irq +real_irq_entry: + SAVE_ALL + +#ifdef CONFIG_SMP + .globl patchme_maybe_smp_msg + + cmp %l7, 11 +patchme_maybe_smp_msg: + bgu maybe_smp4m_msg + nop +#endif + +real_irq_continue: + or %l0, PSR_PIL, %g2 + wr %g2, 0x0, %psr + WRITE_PAUSE + wr %g2, PSR_ET, %psr + WRITE_PAUSE + mov %l7, %o0 ! irq level +patch_handler_irq: + call handler_irq + add %sp, STACKFRAME_SZ, %o1 ! pt_regs ptr + or %l0, PSR_PIL, %g2 ! restore PIL after handler_irq + wr %g2, PSR_ET, %psr ! keep ET up + WRITE_PAUSE + + RESTORE_ALL + +#ifdef CONFIG_SMP + /* SMP per-cpu ticker interrupts are handled specially. */ +smp4m_ticker: + bne real_irq_continue+4 + or %l0, PSR_PIL, %g2 + wr %g2, 0x0, %psr + WRITE_PAUSE + wr %g2, PSR_ET, %psr + WRITE_PAUSE + call smp4m_percpu_timer_interrupt + add %sp, STACKFRAME_SZ, %o0 + wr %l0, PSR_ET, %psr + WRITE_PAUSE + RESTORE_ALL + +#define GET_PROCESSOR4M_ID(reg) \ + rd %tbr, %reg; \ + srl %reg, 12, %reg; \ + and %reg, 3, %reg; + + /* Here is where we check for possible SMP IPI passed to us + * on some level other than 15 which is the NMI and only used + * for cross calls. That has a separate entry point below. + * + * IPIs are sent on Level 12, 13 and 14. See IRQ_IPI_*. + */ +maybe_smp4m_msg: + GET_PROCESSOR4M_ID(o3) + sethi %hi(sun4m_irq_percpu), %l5 + sll %o3, 2, %o3 + or %l5, %lo(sun4m_irq_percpu), %o5 + sethi %hi(0x70000000), %o2 ! Check all soft-IRQs + ld [%o5 + %o3], %o1 + ld [%o1 + 0x00], %o3 ! sun4m_irq_percpu[cpu]->pending + andcc %o3, %o2, %g0 + be,a smp4m_ticker + cmp %l7, 14 + /* Soft-IRQ IPI */ + st %o2, [%o1 + 0x04] ! sun4m_irq_percpu[cpu]->clear=0x70000000 + WRITE_PAUSE + ld [%o1 + 0x00], %g0 ! sun4m_irq_percpu[cpu]->pending + WRITE_PAUSE + or %l0, PSR_PIL, %l4 + wr %l4, 0x0, %psr + WRITE_PAUSE + wr %l4, PSR_ET, %psr + WRITE_PAUSE + srl %o3, 28, %o2 ! shift for simpler checks below +maybe_smp4m_msg_check_single: + andcc %o2, 0x1, %g0 + beq,a maybe_smp4m_msg_check_mask + andcc %o2, 0x2, %g0 + call smp_call_function_single_interrupt + nop + andcc %o2, 0x2, %g0 +maybe_smp4m_msg_check_mask: + beq,a maybe_smp4m_msg_check_resched + andcc %o2, 0x4, %g0 + call smp_call_function_interrupt + nop + andcc %o2, 0x4, %g0 +maybe_smp4m_msg_check_resched: + /* rescheduling is done in RESTORE_ALL regardless, but incr stats */ + beq,a maybe_smp4m_msg_out + nop + call smp_resched_interrupt + nop +maybe_smp4m_msg_out: + RESTORE_ALL + + .align 4 + .globl linux_trap_ipi15_sun4m +linux_trap_ipi15_sun4m: + SAVE_ALL + sethi %hi(0x80000000), %o2 + GET_PROCESSOR4M_ID(o0) + sethi %hi(sun4m_irq_percpu), %l5 + or %l5, %lo(sun4m_irq_percpu), %o5 + sll %o0, 2, %o0 + ld [%o5 + %o0], %o5 + ld [%o5 + 0x00], %o3 ! sun4m_irq_percpu[cpu]->pending + andcc %o3, %o2, %g0 + be sun4m_nmi_error ! Must be an NMI async memory error + st %o2, [%o5 + 0x04] ! sun4m_irq_percpu[cpu]->clear=0x80000000 + WRITE_PAUSE + ld [%o5 + 0x00], %g0 ! sun4m_irq_percpu[cpu]->pending + WRITE_PAUSE + or %l0, PSR_PIL, %l4 + wr %l4, 0x0, %psr + WRITE_PAUSE + wr %l4, PSR_ET, %psr + WRITE_PAUSE + call smp4m_cross_call_irq + nop + b ret_trap_lockless_ipi + clr %l6 + + .globl smp4d_ticker + /* SMP per-cpu ticker interrupts are handled specially. */ +smp4d_ticker: + SAVE_ALL + or %l0, PSR_PIL, %g2 + sethi %hi(CC_ICLR), %o0 + sethi %hi(1 << 14), %o1 + or %o0, %lo(CC_ICLR), %o0 + stha %o1, [%o0] ASI_M_MXCC /* Clear PIL 14 in MXCC's ICLR */ + wr %g2, 0x0, %psr + WRITE_PAUSE + wr %g2, PSR_ET, %psr + WRITE_PAUSE + call smp4d_percpu_timer_interrupt + add %sp, STACKFRAME_SZ, %o0 + wr %l0, PSR_ET, %psr + WRITE_PAUSE + RESTORE_ALL + + .align 4 + .globl linux_trap_ipi15_sun4d +linux_trap_ipi15_sun4d: + SAVE_ALL + sethi %hi(CC_BASE), %o4 + sethi %hi(MXCC_ERR_ME|MXCC_ERR_PEW|MXCC_ERR_ASE|MXCC_ERR_PEE), %o2 + or %o4, (CC_EREG - CC_BASE), %o0 + ldda [%o0] ASI_M_MXCC, %o0 + andcc %o0, %o2, %g0 + bne 1f + sethi %hi(BB_STAT2), %o2 + lduba [%o2] ASI_M_CTL, %o2 + andcc %o2, BB_STAT2_MASK, %g0 + bne 2f + or %o4, (CC_ICLR - CC_BASE), %o0 + sethi %hi(1 << 15), %o1 + stha %o1, [%o0] ASI_M_MXCC /* Clear PIL 15 in MXCC's ICLR */ + or %l0, PSR_PIL, %l4 + wr %l4, 0x0, %psr + WRITE_PAUSE + wr %l4, PSR_ET, %psr + WRITE_PAUSE + call smp4d_cross_call_irq + nop + b ret_trap_lockless_ipi + clr %l6 + +1: /* MXCC error */ +2: /* BB error */ + /* Disable PIL 15 */ + set CC_IMSK, %l4 + lduha [%l4] ASI_M_MXCC, %l5 + sethi %hi(1 << 15), %l7 + or %l5, %l7, %l5 + stha %l5, [%l4] ASI_M_MXCC + /* FIXME */ +1: b,a 1b + + .globl smpleon_ipi + .extern leon_ipi_interrupt + /* SMP per-cpu IPI interrupts are handled specially. */ +smpleon_ipi: + SAVE_ALL + or %l0, PSR_PIL, %g2 + wr %g2, 0x0, %psr + WRITE_PAUSE + wr %g2, PSR_ET, %psr + WRITE_PAUSE + call leonsmp_ipi_interrupt + add %sp, STACKFRAME_SZ, %o1 ! pt_regs + wr %l0, PSR_ET, %psr + WRITE_PAUSE + RESTORE_ALL + + .align 4 + .globl linux_trap_ipi15_leon +linux_trap_ipi15_leon: + SAVE_ALL + or %l0, PSR_PIL, %l4 + wr %l4, 0x0, %psr + WRITE_PAUSE + wr %l4, PSR_ET, %psr + WRITE_PAUSE + call leon_cross_call_irq + nop + b ret_trap_lockless_ipi + clr %l6 + +#endif /* CONFIG_SMP */ + + /* This routine handles illegal instructions and privileged + * instruction attempts from user code. + */ + .align 4 + .globl bad_instruction +bad_instruction: + sethi %hi(0xc1f80000), %l4 + ld [%l1], %l5 + sethi %hi(0x81d80000), %l7 + and %l5, %l4, %l5 + cmp %l5, %l7 + be 1f + SAVE_ALL + + wr %l0, PSR_ET, %psr ! re-enable traps + WRITE_PAUSE + + add %sp, STACKFRAME_SZ, %o0 + mov %l1, %o1 + mov %l2, %o2 + call do_illegal_instruction + mov %l0, %o3 + + RESTORE_ALL + +1: /* unimplemented flush - just skip */ + jmpl %l2, %g0 + rett %l2 + 4 + + .align 4 + .globl priv_instruction +priv_instruction: + SAVE_ALL + + wr %l0, PSR_ET, %psr + WRITE_PAUSE + + add %sp, STACKFRAME_SZ, %o0 + mov %l1, %o1 + mov %l2, %o2 + call do_priv_instruction + mov %l0, %o3 + + RESTORE_ALL + + /* This routine handles unaligned data accesses. */ + .align 4 + .globl mna_handler +mna_handler: + andcc %l0, PSR_PS, %g0 + be mna_fromuser + nop + + SAVE_ALL + + wr %l0, PSR_ET, %psr + WRITE_PAUSE + + ld [%l1], %o1 + call kernel_unaligned_trap + add %sp, STACKFRAME_SZ, %o0 + + RESTORE_ALL + +mna_fromuser: + SAVE_ALL + + wr %l0, PSR_ET, %psr ! re-enable traps + WRITE_PAUSE + + ld [%l1], %o1 + call user_unaligned_trap + add %sp, STACKFRAME_SZ, %o0 + + RESTORE_ALL + + /* This routine handles floating point disabled traps. */ + .align 4 + .globl fpd_trap_handler +fpd_trap_handler: + SAVE_ALL + + wr %l0, PSR_ET, %psr ! re-enable traps + WRITE_PAUSE + + add %sp, STACKFRAME_SZ, %o0 + mov %l1, %o1 + mov %l2, %o2 + call do_fpd_trap + mov %l0, %o3 + + RESTORE_ALL + + /* This routine handles Floating Point Exceptions. */ + .align 4 + .globl fpe_trap_handler +fpe_trap_handler: + set fpsave_magic, %l5 + cmp %l1, %l5 + be 1f + sethi %hi(fpsave), %l5 + or %l5, %lo(fpsave), %l5 + cmp %l1, %l5 + bne 2f + sethi %hi(fpsave_catch2), %l5 + or %l5, %lo(fpsave_catch2), %l5 + wr %l0, 0x0, %psr + WRITE_PAUSE + jmp %l5 + rett %l5 + 4 +1: + sethi %hi(fpsave_catch), %l5 + or %l5, %lo(fpsave_catch), %l5 + wr %l0, 0x0, %psr + WRITE_PAUSE + jmp %l5 + rett %l5 + 4 + +2: + SAVE_ALL + + wr %l0, PSR_ET, %psr ! re-enable traps + WRITE_PAUSE + + add %sp, STACKFRAME_SZ, %o0 + mov %l1, %o1 + mov %l2, %o2 + call do_fpe_trap + mov %l0, %o3 + + RESTORE_ALL + + /* This routine handles Tag Overflow Exceptions. */ + .align 4 + .globl do_tag_overflow +do_tag_overflow: + SAVE_ALL + + wr %l0, PSR_ET, %psr ! re-enable traps + WRITE_PAUSE + + add %sp, STACKFRAME_SZ, %o0 + mov %l1, %o1 + mov %l2, %o2 + call handle_tag_overflow + mov %l0, %o3 + + RESTORE_ALL + + /* This routine handles Watchpoint Exceptions. */ + .align 4 + .globl do_watchpoint +do_watchpoint: + SAVE_ALL + + wr %l0, PSR_ET, %psr ! re-enable traps + WRITE_PAUSE + + add %sp, STACKFRAME_SZ, %o0 + mov %l1, %o1 + mov %l2, %o2 + call handle_watchpoint + mov %l0, %o3 + + RESTORE_ALL + + /* This routine handles Register Access Exceptions. */ + .align 4 + .globl do_reg_access +do_reg_access: + SAVE_ALL + + wr %l0, PSR_ET, %psr ! re-enable traps + WRITE_PAUSE + + add %sp, STACKFRAME_SZ, %o0 + mov %l1, %o1 + mov %l2, %o2 + call handle_reg_access + mov %l0, %o3 + + RESTORE_ALL + + /* This routine handles Co-Processor Disabled Exceptions. */ + .align 4 + .globl do_cp_disabled +do_cp_disabled: + SAVE_ALL + + wr %l0, PSR_ET, %psr ! re-enable traps + WRITE_PAUSE + + add %sp, STACKFRAME_SZ, %o0 + mov %l1, %o1 + mov %l2, %o2 + call handle_cp_disabled + mov %l0, %o3 + + RESTORE_ALL + + /* This routine handles Co-Processor Exceptions. */ + .align 4 + .globl do_cp_exception +do_cp_exception: + SAVE_ALL + + wr %l0, PSR_ET, %psr ! re-enable traps + WRITE_PAUSE + + add %sp, STACKFRAME_SZ, %o0 + mov %l1, %o1 + mov %l2, %o2 + call handle_cp_exception + mov %l0, %o3 + + RESTORE_ALL + + /* This routine handles Hardware Divide By Zero Exceptions. */ + .align 4 + .globl do_hw_divzero +do_hw_divzero: + SAVE_ALL + + wr %l0, PSR_ET, %psr ! re-enable traps + WRITE_PAUSE + + add %sp, STACKFRAME_SZ, %o0 + mov %l1, %o1 + mov %l2, %o2 + call handle_hw_divzero + mov %l0, %o3 + + RESTORE_ALL + + .align 4 + .globl do_flush_windows +do_flush_windows: + SAVE_ALL + + wr %l0, PSR_ET, %psr + WRITE_PAUSE + + andcc %l0, PSR_PS, %g0 + bne dfw_kernel + nop + + call flush_user_windows + nop + + /* Advance over the trap instruction. */ + ld [%sp + STACKFRAME_SZ + PT_NPC], %l1 + add %l1, 0x4, %l2 + st %l1, [%sp + STACKFRAME_SZ + PT_PC] + st %l2, [%sp + STACKFRAME_SZ + PT_NPC] + + RESTORE_ALL + + .globl flush_patch_one + + /* We get these for debugging routines using __builtin_return_address() */ +dfw_kernel: +flush_patch_one: + FLUSH_ALL_KERNEL_WINDOWS + + /* Advance over the trap instruction. */ + ld [%sp + STACKFRAME_SZ + PT_NPC], %l1 + add %l1, 0x4, %l2 + st %l1, [%sp + STACKFRAME_SZ + PT_PC] + st %l2, [%sp + STACKFRAME_SZ + PT_NPC] + + RESTORE_ALL + + /* The getcc software trap. The user wants the condition codes from + * the %psr in register %g1. + */ + + .align 4 + .globl getcc_trap_handler +getcc_trap_handler: + srl %l0, 20, %g1 ! give user + and %g1, 0xf, %g1 ! only ICC bits in %psr + jmp %l2 ! advance over trap instruction + rett %l2 + 0x4 ! like this... + + /* The setcc software trap. The user has condition codes in %g1 + * that it would like placed in the %psr. Be careful not to flip + * any unintentional bits! + */ + + .align 4 + .globl setcc_trap_handler +setcc_trap_handler: + sll %g1, 0x14, %l4 + set PSR_ICC, %l5 + andn %l0, %l5, %l0 ! clear ICC bits in %psr + and %l4, %l5, %l4 ! clear non-ICC bits in user value + or %l4, %l0, %l4 ! or them in... mix mix mix + + wr %l4, 0x0, %psr ! set new %psr + WRITE_PAUSE ! TI scumbags... + + jmp %l2 ! advance over trap instruction + rett %l2 + 0x4 ! like this... + +sun4m_nmi_error: + /* NMI async memory error handling. */ + sethi %hi(0x80000000), %l4 + sethi %hi(sun4m_irq_global), %o5 + ld [%o5 + %lo(sun4m_irq_global)], %l5 + st %l4, [%l5 + 0x0c] ! sun4m_irq_global->mask_set=0x80000000 + WRITE_PAUSE + ld [%l5 + 0x00], %g0 ! sun4m_irq_global->pending + WRITE_PAUSE + or %l0, PSR_PIL, %l4 + wr %l4, 0x0, %psr + WRITE_PAUSE + wr %l4, PSR_ET, %psr + WRITE_PAUSE + call sun4m_nmi + nop + st %l4, [%l5 + 0x08] ! sun4m_irq_global->mask_clear=0x80000000 + WRITE_PAUSE + ld [%l5 + 0x00], %g0 ! sun4m_irq_global->pending + WRITE_PAUSE + RESTORE_ALL + +#ifndef CONFIG_SMP + .align 4 + .globl linux_trap_ipi15_sun4m +linux_trap_ipi15_sun4m: + SAVE_ALL + + ba sun4m_nmi_error + nop +#endif /* CONFIG_SMP */ + + .align 4 + .globl srmmu_fault +srmmu_fault: + mov 0x400, %l5 + mov 0x300, %l4 + +LEON_PI(lda [%l5] ASI_LEON_MMUREGS, %l6) ! read sfar first +SUN_PI_(lda [%l5] ASI_M_MMUREGS, %l6) ! read sfar first + +LEON_PI(lda [%l4] ASI_LEON_MMUREGS, %l5) ! read sfsr last +SUN_PI_(lda [%l4] ASI_M_MMUREGS, %l5) ! read sfsr last + + andn %l6, 0xfff, %l6 + srl %l5, 6, %l5 ! and encode all info into l7 + + and %l5, 2, %l5 + or %l5, %l6, %l6 + + or %l6, %l7, %l7 ! l7 = [addr,write,txtfault] + + SAVE_ALL + + mov %l7, %o1 + mov %l7, %o2 + and %o1, 1, %o1 ! arg2 = text_faultp + mov %l7, %o3 + and %o2, 2, %o2 ! arg3 = writep + andn %o3, 0xfff, %o3 ! arg4 = faulting address + + wr %l0, PSR_ET, %psr + WRITE_PAUSE + + call do_sparc_fault + add %sp, STACKFRAME_SZ, %o0 ! arg1 = pt_regs ptr + + RESTORE_ALL + + .align 4 +sunos_execv: + .globl sunos_execv + b sys_execve + clr %i2 + + .align 4 + .globl sys_sigstack +sys_sigstack: + mov %o7, %l5 + mov %fp, %o2 + call do_sys_sigstack + mov %l5, %o7 + + .align 4 + .globl sys_sigreturn +sys_sigreturn: + call do_sigreturn + add %sp, STACKFRAME_SZ, %o0 + + ld [%curptr + TI_FLAGS], %l5 + andcc %l5, _TIF_SYSCALL_TRACE, %g0 + be 1f + nop + + call syscall_trace + mov 1, %o1 + +1: + /* We don't want to muck with user registers like a + * normal syscall, just return. + */ + RESTORE_ALL + + .align 4 + .globl sys_rt_sigreturn +sys_rt_sigreturn: + call do_rt_sigreturn + add %sp, STACKFRAME_SZ, %o0 + + ld [%curptr + TI_FLAGS], %l5 + andcc %l5, _TIF_SYSCALL_TRACE, %g0 + be 1f + nop + + add %sp, STACKFRAME_SZ, %o0 + call syscall_trace + mov 1, %o1 + +1: + /* We are returning to a signal handler. */ + RESTORE_ALL + + /* Now that we have a real sys_clone, sys_fork() is + * implemented in terms of it. Our _real_ implementation + * of SunOS vfork() will use sys_vfork(). + * + * XXX These three should be consolidated into mostly shared + * XXX code just like on sparc64... -DaveM + */ + .align 4 + .globl sys_fork, flush_patch_two +sys_fork: + mov %o7, %l5 +flush_patch_two: + FLUSH_ALL_KERNEL_WINDOWS; + ld [%curptr + TI_TASK], %o4 + rd %psr, %g4 + WRITE_PAUSE + rd %wim, %g5 + WRITE_PAUSE + std %g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr] + add %sp, STACKFRAME_SZ, %o0 + call sparc_fork + mov %l5, %o7 + + /* Whee, kernel threads! */ + .globl sys_clone, flush_patch_three +sys_clone: + mov %o7, %l5 +flush_patch_three: + FLUSH_ALL_KERNEL_WINDOWS; + ld [%curptr + TI_TASK], %o4 + rd %psr, %g4 + WRITE_PAUSE + rd %wim, %g5 + WRITE_PAUSE + std %g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr] + add %sp, STACKFRAME_SZ, %o0 + call sparc_clone + mov %l5, %o7 + + /* Whee, real vfork! */ + .globl sys_vfork, flush_patch_four +sys_vfork: +flush_patch_four: + FLUSH_ALL_KERNEL_WINDOWS; + ld [%curptr + TI_TASK], %o4 + rd %psr, %g4 + WRITE_PAUSE + rd %wim, %g5 + WRITE_PAUSE + std %g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr] + sethi %hi(sparc_vfork), %l1 + jmpl %l1 + %lo(sparc_vfork), %g0 + add %sp, STACKFRAME_SZ, %o0 + + .align 4 +linux_sparc_ni_syscall: + sethi %hi(sys_ni_syscall), %l7 + b do_syscall + or %l7, %lo(sys_ni_syscall), %l7 + +linux_syscall_trace: + add %sp, STACKFRAME_SZ, %o0 + call syscall_trace + mov 0, %o1 + cmp %o0, 0 + bne 3f + mov -ENOSYS, %o0 + + /* Syscall tracing can modify the registers. */ + ld [%sp + STACKFRAME_SZ + PT_G1], %g1 + sethi %hi(sys_call_table), %l7 + ld [%sp + STACKFRAME_SZ + PT_I0], %i0 + or %l7, %lo(sys_call_table), %l7 + ld [%sp + STACKFRAME_SZ + PT_I1], %i1 + ld [%sp + STACKFRAME_SZ + PT_I2], %i2 + ld [%sp + STACKFRAME_SZ + PT_I3], %i3 + ld [%sp + STACKFRAME_SZ + PT_I4], %i4 + ld [%sp + STACKFRAME_SZ + PT_I5], %i5 + cmp %g1, NR_syscalls + bgeu 3f + mov -ENOSYS, %o0 + + sll %g1, 2, %l4 + mov %i0, %o0 + ld [%l7 + %l4], %l7 + mov %i1, %o1 + mov %i2, %o2 + mov %i3, %o3 + b 2f + mov %i4, %o4 + + .globl ret_from_fork +ret_from_fork: + call schedule_tail + ld [%g3 + TI_TASK], %o0 + b ret_sys_call + ld [%sp + STACKFRAME_SZ + PT_I0], %o0 + + .globl ret_from_kernel_thread +ret_from_kernel_thread: + call schedule_tail + ld [%g3 + TI_TASK], %o0 + ld [%sp + STACKFRAME_SZ + PT_G1], %l0 + call %l0 + ld [%sp + STACKFRAME_SZ + PT_G2], %o0 + rd %psr, %l1 + ld [%sp + STACKFRAME_SZ + PT_PSR], %l0 + andn %l0, PSR_CWP, %l0 + nop + and %l1, PSR_CWP, %l1 + or %l0, %l1, %l0 + st %l0, [%sp + STACKFRAME_SZ + PT_PSR] + b ret_sys_call + mov 0, %o0 + + /* Linux native system calls enter here... */ + .align 4 + .globl linux_sparc_syscall +linux_sparc_syscall: + sethi %hi(PSR_SYSCALL), %l4 + or %l0, %l4, %l0 + /* Direct access to user regs, must faster. */ + cmp %g1, NR_syscalls + bgeu linux_sparc_ni_syscall + sll %g1, 2, %l4 + ld [%l7 + %l4], %l7 + +do_syscall: + SAVE_ALL_HEAD + rd %wim, %l3 + + wr %l0, PSR_ET, %psr + mov %i0, %o0 + mov %i1, %o1 + mov %i2, %o2 + + ld [%curptr + TI_FLAGS], %l5 + mov %i3, %o3 + andcc %l5, _TIF_SYSCALL_TRACE, %g0 + mov %i4, %o4 + bne linux_syscall_trace + mov %i0, %l5 +2: + call %l7 + mov %i5, %o5 + +3: + st %o0, [%sp + STACKFRAME_SZ + PT_I0] + +ret_sys_call: + ld [%curptr + TI_FLAGS], %l6 + cmp %o0, -ERESTART_RESTARTBLOCK + ld [%sp + STACKFRAME_SZ + PT_PSR], %g3 + set PSR_C, %g2 + bgeu 1f + andcc %l6, _TIF_SYSCALL_TRACE, %g0 + + /* System call success, clear Carry condition code. */ + andn %g3, %g2, %g3 + clr %l6 + st %g3, [%sp + STACKFRAME_SZ + PT_PSR] + bne linux_syscall_trace2 + ld [%sp + STACKFRAME_SZ + PT_NPC], %l1 /* pc = npc */ + add %l1, 0x4, %l2 /* npc = npc+4 */ + st %l1, [%sp + STACKFRAME_SZ + PT_PC] + b ret_trap_entry + st %l2, [%sp + STACKFRAME_SZ + PT_NPC] +1: + /* System call failure, set Carry condition code. + * Also, get abs(errno) to return to the process. + */ + sub %g0, %o0, %o0 + or %g3, %g2, %g3 + st %o0, [%sp + STACKFRAME_SZ + PT_I0] + mov 1, %l6 + st %g3, [%sp + STACKFRAME_SZ + PT_PSR] + bne linux_syscall_trace2 + ld [%sp + STACKFRAME_SZ + PT_NPC], %l1 /* pc = npc */ + add %l1, 0x4, %l2 /* npc = npc+4 */ + st %l1, [%sp + STACKFRAME_SZ + PT_PC] + b ret_trap_entry + st %l2, [%sp + STACKFRAME_SZ + PT_NPC] + +linux_syscall_trace2: + add %sp, STACKFRAME_SZ, %o0 + mov 1, %o1 + call syscall_trace + add %l1, 0x4, %l2 /* npc = npc+4 */ + st %l1, [%sp + STACKFRAME_SZ + PT_PC] + b ret_trap_entry + st %l2, [%sp + STACKFRAME_SZ + PT_NPC] + + +/* Saving and restoring the FPU state is best done from lowlevel code. + * + * void fpsave(unsigned long *fpregs, unsigned long *fsr, + * void *fpqueue, unsigned long *fpqdepth) + */ + + .globl fpsave +fpsave: + st %fsr, [%o1] ! this can trap on us if fpu is in bogon state + ld [%o1], %g1 + set 0x2000, %g4 + andcc %g1, %g4, %g0 + be 2f + mov 0, %g2 + + /* We have an fpqueue to save. */ +1: + std %fq, [%o2] +fpsave_magic: + st %fsr, [%o1] + ld [%o1], %g3 + andcc %g3, %g4, %g0 + add %g2, 1, %g2 + bne 1b + add %o2, 8, %o2 + +2: + st %g2, [%o3] + + std %f0, [%o0 + 0x00] + std %f2, [%o0 + 0x08] + std %f4, [%o0 + 0x10] + std %f6, [%o0 + 0x18] + std %f8, [%o0 + 0x20] + std %f10, [%o0 + 0x28] + std %f12, [%o0 + 0x30] + std %f14, [%o0 + 0x38] + std %f16, [%o0 + 0x40] + std %f18, [%o0 + 0x48] + std %f20, [%o0 + 0x50] + std %f22, [%o0 + 0x58] + std %f24, [%o0 + 0x60] + std %f26, [%o0 + 0x68] + std %f28, [%o0 + 0x70] + retl + std %f30, [%o0 + 0x78] + + /* Thanks for Theo Deraadt and the authors of the Sprite/netbsd/openbsd + * code for pointing out this possible deadlock, while we save state + * above we could trap on the fsr store so our low level fpu trap + * code has to know how to deal with this. + */ +fpsave_catch: + b fpsave_magic + 4 + st %fsr, [%o1] + +fpsave_catch2: + b fpsave + 4 + st %fsr, [%o1] + + /* void fpload(unsigned long *fpregs, unsigned long *fsr); */ + + .globl fpload +fpload: + ldd [%o0 + 0x00], %f0 + ldd [%o0 + 0x08], %f2 + ldd [%o0 + 0x10], %f4 + ldd [%o0 + 0x18], %f6 + ldd [%o0 + 0x20], %f8 + ldd [%o0 + 0x28], %f10 + ldd [%o0 + 0x30], %f12 + ldd [%o0 + 0x38], %f14 + ldd [%o0 + 0x40], %f16 + ldd [%o0 + 0x48], %f18 + ldd [%o0 + 0x50], %f20 + ldd [%o0 + 0x58], %f22 + ldd [%o0 + 0x60], %f24 + ldd [%o0 + 0x68], %f26 + ldd [%o0 + 0x70], %f28 + ldd [%o0 + 0x78], %f30 + ld [%o1], %fsr + retl + nop + + /* __ndelay and __udelay take two arguments: + * 0 - nsecs or usecs to delay + * 1 - per_cpu udelay_val (loops per jiffy) + * + * Note that ndelay gives HZ times higher resolution but has a 10ms + * limit. udelay can handle up to 1s. + */ + .globl __ndelay +__ndelay: + save %sp, -STACKFRAME_SZ, %sp + mov %i0, %o0 ! round multiplier up so large ns ok + mov 0x1ae, %o1 ! 2**32 / (1 000 000 000 / HZ) + umul %o0, %o1, %o0 + rd %y, %o1 + mov %i1, %o1 ! udelay_val + umul %o0, %o1, %o0 + rd %y, %o1 + ba delay_continue + mov %o1, %o0 ! >>32 later for better resolution + + .globl __udelay +__udelay: + save %sp, -STACKFRAME_SZ, %sp + mov %i0, %o0 + sethi %hi(0x10c7), %o1 ! round multiplier up so large us ok + or %o1, %lo(0x10c7), %o1 ! 2**32 / 1 000 000 + umul %o0, %o1, %o0 + rd %y, %o1 + mov %i1, %o1 ! udelay_val + umul %o0, %o1, %o0 + rd %y, %o1 + sethi %hi(0x028f4b62), %l0 ! Add in rounding constant * 2**32, + or %g0, %lo(0x028f4b62), %l0 + addcc %o0, %l0, %o0 ! 2**32 * 0.009 999 + bcs,a 3f + add %o1, 0x01, %o1 +3: + mov HZ, %o0 ! >>32 earlier for wider range + umul %o0, %o1, %o0 + rd %y, %o1 + +delay_continue: + cmp %o0, 0x0 +1: + bne 1b + subcc %o0, 1, %o0 + + ret + restore +EXPORT_SYMBOL(__udelay) +EXPORT_SYMBOL(__ndelay) + + /* Handle a software breakpoint */ + /* We have to inform parent that child has stopped */ + .align 4 + .globl breakpoint_trap +breakpoint_trap: + rd %wim,%l3 + SAVE_ALL + wr %l0, PSR_ET, %psr + WRITE_PAUSE + + st %i0, [%sp + STACKFRAME_SZ + PT_G0] ! for restarting syscalls + call sparc_breakpoint + add %sp, STACKFRAME_SZ, %o0 + + RESTORE_ALL + +#ifdef CONFIG_KGDB + ENTRY(kgdb_trap_low) + rd %wim,%l3 + SAVE_ALL + wr %l0, PSR_ET, %psr + WRITE_PAUSE + + mov %l7, %o0 ! trap_level + call kgdb_trap + add %sp, STACKFRAME_SZ, %o1 ! struct pt_regs *regs + + RESTORE_ALL + ENDPROC(kgdb_trap_low) +#endif + + .align 4 + .globl flush_patch_exception +flush_patch_exception: + FLUSH_ALL_KERNEL_WINDOWS; + ldd [%o0], %o6 + jmpl %o7 + 0xc, %g0 ! see asm-sparc/processor.h + mov 1, %g1 ! signal EFAULT condition + + .align 4 + .globl kill_user_windows, kuw_patch1_7win + .globl kuw_patch1 +kuw_patch1_7win: sll %o3, 6, %o3 + + /* No matter how much overhead this routine has in the worst + * case scenario, it is several times better than taking the + * traps with the old method of just doing flush_user_windows(). + */ +kill_user_windows: + ld [%g6 + TI_UWINMASK], %o0 ! get current umask + orcc %g0, %o0, %g0 ! if no bits set, we are done + be 3f ! nothing to do + rd %psr, %o5 ! must clear interrupts + or %o5, PSR_PIL, %o4 ! or else that could change + wr %o4, 0x0, %psr ! the uwinmask state + WRITE_PAUSE ! burn them cycles +1: + ld [%g6 + TI_UWINMASK], %o0 ! get consistent state + orcc %g0, %o0, %g0 ! did an interrupt come in? + be 4f ! yep, we are done + rd %wim, %o3 ! get current wim + srl %o3, 1, %o4 ! simulate a save +kuw_patch1: + sll %o3, 7, %o3 ! compute next wim + or %o4, %o3, %o3 ! result + andncc %o0, %o3, %o0 ! clean this bit in umask + bne kuw_patch1 ! not done yet + srl %o3, 1, %o4 ! begin another save simulation + wr %o3, 0x0, %wim ! set the new wim + st %g0, [%g6 + TI_UWINMASK] ! clear uwinmask +4: + wr %o5, 0x0, %psr ! re-enable interrupts + WRITE_PAUSE ! burn baby burn +3: + retl ! return + st %g0, [%g6 + TI_W_SAVED] ! no windows saved + + .align 4 + .globl restore_current +restore_current: + LOAD_CURRENT(g6, o0) + retl + nop + +#ifdef CONFIG_PCIC_PCI +#include <asm/pcic.h> + + .align 4 + .globl linux_trap_ipi15_pcic +linux_trap_ipi15_pcic: + rd %wim, %l3 + SAVE_ALL + + /* + * First deactivate NMI + * or we cannot drop ET, cannot get window spill traps. + * The busy loop is necessary because the PIO error + * sometimes does not go away quickly and we trap again. + */ + sethi %hi(pcic_regs), %o1 + ld [%o1 + %lo(pcic_regs)], %o2 + + ! Get pending status for printouts later. + ld [%o2 + PCI_SYS_INT_PENDING], %o0 + + mov PCI_SYS_INT_PENDING_CLEAR_ALL, %o1 + stb %o1, [%o2 + PCI_SYS_INT_PENDING_CLEAR] +1: + ld [%o2 + PCI_SYS_INT_PENDING], %o1 + andcc %o1, ((PCI_SYS_INT_PENDING_PIO|PCI_SYS_INT_PENDING_PCI)>>24), %g0 + bne 1b + nop + + or %l0, PSR_PIL, %l4 + wr %l4, 0x0, %psr + WRITE_PAUSE + wr %l4, PSR_ET, %psr + WRITE_PAUSE + + call pcic_nmi + add %sp, STACKFRAME_SZ, %o1 ! struct pt_regs *regs + RESTORE_ALL + + .globl pcic_nmi_trap_patch +pcic_nmi_trap_patch: + sethi %hi(linux_trap_ipi15_pcic), %l3 + jmpl %l3 + %lo(linux_trap_ipi15_pcic), %g0 + rd %psr, %l0 + .word 0 + +#endif /* CONFIG_PCIC_PCI */ + + .globl flushw_all +flushw_all: + save %sp, -0x40, %sp + save %sp, -0x40, %sp + save %sp, -0x40, %sp + save %sp, -0x40, %sp + save %sp, -0x40, %sp + save %sp, -0x40, %sp + save %sp, -0x40, %sp + restore + restore + restore + restore + restore + restore + ret + restore + +#ifdef CONFIG_SMP +ENTRY(hard_smp_processor_id) +661: rd %tbr, %g1 + srl %g1, 12, %o0 + and %o0, 3, %o0 + .section .cpuid_patch, "ax" + /* Instruction location. */ + .word 661b + /* SUN4D implementation. */ + lda [%g0] ASI_M_VIKING_TMP1, %o0 + nop + nop + /* LEON implementation. */ + rd %asr17, %o0 + srl %o0, 0x1c, %o0 + nop + .previous + retl + nop +ENDPROC(hard_smp_processor_id) +#endif + +/* End of entry.S */ |