diff options
Diffstat (limited to 'arch/x86/pci/common.c')
| -rw-r--r-- | arch/x86/pci/common.c | 726 |
1 files changed, 726 insertions, 0 deletions
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c new file mode 100644 index 000000000..3507f456f --- /dev/null +++ b/arch/x86/pci/common.c @@ -0,0 +1,726 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Low-Level PCI Support for PC + * + * (c) 1999--2000 Martin Mares <mj@ucw.cz> + */ + +#include <linux/sched.h> +#include <linux/pci.h> +#include <linux/pci-acpi.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/dmi.h> +#include <linux/slab.h> + +#include <asm/acpi.h> +#include <asm/segment.h> +#include <asm/io.h> +#include <asm/smp.h> +#include <asm/pci_x86.h> +#include <asm/setup.h> +#include <asm/irqdomain.h> + +unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 | + PCI_PROBE_MMCONF; + +static int pci_bf_sort; +int pci_routeirq; +int noioapicquirk; +#ifdef CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS +int noioapicreroute = 0; +#else +int noioapicreroute = 1; +#endif +int pcibios_last_bus = -1; +unsigned long pirq_table_addr; +const struct pci_raw_ops *__read_mostly raw_pci_ops; +const struct pci_raw_ops *__read_mostly raw_pci_ext_ops; + +int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn, + int reg, int len, u32 *val) +{ + if (domain == 0 && reg < 256 && raw_pci_ops) + return raw_pci_ops->read(domain, bus, devfn, reg, len, val); + if (raw_pci_ext_ops) + return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val); + return -EINVAL; +} + +int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn, + int reg, int len, u32 val) +{ + if (domain == 0 && reg < 256 && raw_pci_ops) + return raw_pci_ops->write(domain, bus, devfn, reg, len, val); + if (raw_pci_ext_ops) + return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val); + return -EINVAL; +} + +static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) +{ + return raw_pci_read(pci_domain_nr(bus), bus->number, + devfn, where, size, value); +} + +static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) +{ + return raw_pci_write(pci_domain_nr(bus), bus->number, + devfn, where, size, value); +} + +struct pci_ops pci_root_ops = { + .read = pci_read, + .write = pci_write, +}; + +/* + * This interrupt-safe spinlock protects all accesses to PCI configuration + * space, except for the mmconfig (ECAM) based operations. + */ +DEFINE_RAW_SPINLOCK(pci_config_lock); + +static int __init can_skip_ioresource_align(const struct dmi_system_id *d) +{ + pci_probe |= PCI_CAN_SKIP_ISA_ALIGN; + printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident); + return 0; +} + +static const struct dmi_system_id can_skip_pciprobe_dmi_table[] __initconst = { +/* + * Systems where PCI IO resource ISA alignment can be skipped + * when the ISA enable bit in the bridge control is not set + */ + { + .callback = can_skip_ioresource_align, + .ident = "IBM System x3800", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "IBM"), + DMI_MATCH(DMI_PRODUCT_NAME, "x3800"), + }, + }, + { + .callback = can_skip_ioresource_align, + .ident = "IBM System x3850", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "IBM"), + DMI_MATCH(DMI_PRODUCT_NAME, "x3850"), + }, + }, + { + .callback = can_skip_ioresource_align, + .ident = "IBM System x3950", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "IBM"), + DMI_MATCH(DMI_PRODUCT_NAME, "x3950"), + }, + }, + {} +}; + +void __init dmi_check_skip_isa_align(void) +{ + dmi_check_system(can_skip_pciprobe_dmi_table); +} + +static void pcibios_fixup_device_resources(struct pci_dev *dev) +{ + struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE]; + struct resource *bar_r; + int bar; + + if (pci_probe & PCI_NOASSIGN_BARS) { + /* + * If the BIOS did not assign the BAR, zero out the + * resource so the kernel doesn't attempt to assign + * it later on in pci_assign_unassigned_resources + */ + for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) { + bar_r = &dev->resource[bar]; + if (bar_r->start == 0 && bar_r->end != 0) { + bar_r->flags = 0; + bar_r->end = 0; + } + } + } + + if (pci_probe & PCI_NOASSIGN_ROMS) { + if (rom_r->parent) + return; + if (rom_r->start) { + /* we deal with BIOS assigned ROM later */ + return; + } + rom_r->start = rom_r->end = rom_r->flags = 0; + } +} + +/* + * Called after each bus is probed, but before its children + * are examined. + */ + +void pcibios_fixup_bus(struct pci_bus *b) +{ + struct pci_dev *dev; + + pci_read_bridge_bases(b); + list_for_each_entry(dev, &b->devices, bus_list) + pcibios_fixup_device_resources(dev); +} + +void pcibios_add_bus(struct pci_bus *bus) +{ + acpi_pci_add_bus(bus); +} + +void pcibios_remove_bus(struct pci_bus *bus) +{ + acpi_pci_remove_bus(bus); +} + +/* + * Only use DMI information to set this if nothing was passed + * on the kernel command line (which was parsed earlier). + */ + +static int __init set_bf_sort(const struct dmi_system_id *d) +{ + if (pci_bf_sort == pci_bf_sort_default) { + pci_bf_sort = pci_dmi_bf; + printk(KERN_INFO "PCI: %s detected, enabling pci=bfsort.\n", d->ident); + } + return 0; +} + +static void __init read_dmi_type_b1(const struct dmi_header *dm, + void *private_data) +{ + u8 *data = (u8 *)dm + 4; + + if (dm->type != 0xB1) + return; + if ((((*(u32 *)data) >> 9) & 0x03) == 0x01) + set_bf_sort((const struct dmi_system_id *)private_data); +} + +static int __init find_sort_method(const struct dmi_system_id *d) +{ + dmi_walk(read_dmi_type_b1, (void *)d); + return 0; +} + +/* + * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus) + */ +#ifdef __i386__ +static int __init assign_all_busses(const struct dmi_system_id *d) +{ + pci_probe |= PCI_ASSIGN_ALL_BUSSES; + printk(KERN_INFO "%s detected: enabling PCI bus# renumbering" + " (pci=assign-busses)\n", d->ident); + return 0; +} +#endif + +static int __init set_scan_all(const struct dmi_system_id *d) +{ + printk(KERN_INFO "PCI: %s detected, enabling pci=pcie_scan_all\n", + d->ident); + pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS); + return 0; +} + +static const struct dmi_system_id pciprobe_dmi_table[] __initconst = { +#ifdef __i386__ +/* + * Laptops which need pci=assign-busses to see Cardbus cards + */ + { + .callback = assign_all_busses, + .ident = "Samsung X20 Laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"), + DMI_MATCH(DMI_PRODUCT_NAME, "SX20S"), + }, + }, +#endif /* __i386__ */ + { + .callback = set_bf_sort, + .ident = "Dell PowerEdge 1950", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"), + }, + }, + { + .callback = set_bf_sort, + .ident = "Dell PowerEdge 1955", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1955"), + }, + }, + { + .callback = set_bf_sort, + .ident = "Dell PowerEdge 2900", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2900"), + }, + }, + { + .callback = set_bf_sort, + .ident = "Dell PowerEdge 2950", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"), + }, + }, + { + .callback = set_bf_sort, + .ident = "Dell PowerEdge R900", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"), + }, + }, + { + .callback = find_sort_method, + .ident = "Dell System", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL20p G3", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G3"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL20p G4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G4"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL30p G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL30p G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL25p G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL25p G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL35p G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL35p G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL45p G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL45p G2", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G2"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL460c G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL460c G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL465c G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL465c G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL480c G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL480c G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant BL685c G1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL685c G1"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant DL360", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant DL380", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"), + }, + }, +#ifdef __i386__ + { + .callback = assign_all_busses, + .ident = "Compaq EVO N800c", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), + DMI_MATCH(DMI_PRODUCT_NAME, "EVO N800c"), + }, + }, +#endif + { + .callback = set_bf_sort, + .ident = "HP ProLiant DL385 G2", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"), + }, + }, + { + .callback = set_bf_sort, + .ident = "HP ProLiant DL585 G2", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HP"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"), + }, + }, + { + .callback = set_scan_all, + .ident = "Stratus/NEC ftServer", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Stratus"), + DMI_MATCH(DMI_PRODUCT_NAME, "ftServer"), + }, + }, + { + .callback = set_scan_all, + .ident = "Stratus/NEC ftServer", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "NEC"), + DMI_MATCH(DMI_PRODUCT_NAME, "Express5800/R32"), + }, + }, + { + .callback = set_scan_all, + .ident = "Stratus/NEC ftServer", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "NEC"), + DMI_MATCH(DMI_PRODUCT_NAME, "Express5800/R31"), + }, + }, + {} +}; + +void __init dmi_check_pciprobe(void) +{ + dmi_check_system(pciprobe_dmi_table); +} + +void pcibios_scan_root(int busnum) +{ + struct pci_bus *bus; + struct pci_sysdata *sd; + LIST_HEAD(resources); + + sd = kzalloc(sizeof(*sd), GFP_KERNEL); + if (!sd) { + printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busnum); + return; + } + sd->node = x86_pci_root_bus_node(busnum); + x86_pci_root_bus_resources(busnum, &resources); + printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum); + bus = pci_scan_root_bus(NULL, busnum, &pci_root_ops, sd, &resources); + if (!bus) { + pci_free_resource_list(&resources); + kfree(sd); + return; + } + pci_bus_add_devices(bus); +} + +void __init pcibios_set_cache_line_size(void) +{ + struct cpuinfo_x86 *c = &boot_cpu_data; + + /* + * Set PCI cacheline size to that of the CPU if the CPU has reported it. + * (For older CPUs that don't support cpuid, we se it to 32 bytes + * It's also good for 386/486s (which actually have 16) + * as quite a few PCI devices do not support smaller values. + */ + if (c->x86_clflush_size > 0) { + pci_dfl_cache_line_size = c->x86_clflush_size >> 2; + printk(KERN_DEBUG "PCI: pci_cache_line_size set to %d bytes\n", + pci_dfl_cache_line_size << 2); + } else { + pci_dfl_cache_line_size = 32 >> 2; + printk(KERN_DEBUG "PCI: Unknown cacheline size. Setting to 32 bytes\n"); + } +} + +int __init pcibios_init(void) +{ + if (!raw_pci_ops && !raw_pci_ext_ops) { + printk(KERN_WARNING "PCI: System does not support PCI\n"); + return 0; + } + + pcibios_set_cache_line_size(); + pcibios_resource_survey(); + + if (pci_bf_sort >= pci_force_bf) + pci_sort_breadthfirst(); + return 0; +} + +char *__init pcibios_setup(char *str) +{ + if (!strcmp(str, "off")) { + pci_probe = 0; + return NULL; + } else if (!strcmp(str, "bfsort")) { + pci_bf_sort = pci_force_bf; + return NULL; + } else if (!strcmp(str, "nobfsort")) { + pci_bf_sort = pci_force_nobf; + return NULL; + } +#ifdef CONFIG_PCI_BIOS + else if (!strcmp(str, "bios")) { + pci_probe = PCI_PROBE_BIOS; + return NULL; + } else if (!strcmp(str, "nobios")) { + pci_probe &= ~PCI_PROBE_BIOS; + return NULL; + } else if (!strcmp(str, "biosirq")) { + pci_probe |= PCI_BIOS_IRQ_SCAN; + return NULL; + } else if (!strncmp(str, "pirqaddr=", 9)) { + pirq_table_addr = simple_strtoul(str+9, NULL, 0); + return NULL; + } +#endif +#ifdef CONFIG_PCI_DIRECT + else if (!strcmp(str, "conf1")) { + pci_probe = PCI_PROBE_CONF1 | PCI_NO_CHECKS; + return NULL; + } + else if (!strcmp(str, "conf2")) { + pci_probe = PCI_PROBE_CONF2 | PCI_NO_CHECKS; + return NULL; + } +#endif +#ifdef CONFIG_PCI_MMCONFIG + else if (!strcmp(str, "nommconf")) { + pci_probe &= ~PCI_PROBE_MMCONF; + return NULL; + } + else if (!strcmp(str, "check_enable_amd_mmconf")) { + pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF; + return NULL; + } +#endif + else if (!strcmp(str, "noacpi")) { + acpi_noirq_set(); + return NULL; + } + else if (!strcmp(str, "noearly")) { + pci_probe |= PCI_PROBE_NOEARLY; + return NULL; + } + else if (!strcmp(str, "usepirqmask")) { + pci_probe |= PCI_USE_PIRQ_MASK; + return NULL; + } else if (!strncmp(str, "irqmask=", 8)) { + pcibios_irq_mask = simple_strtol(str+8, NULL, 0); + return NULL; + } else if (!strncmp(str, "lastbus=", 8)) { + pcibios_last_bus = simple_strtol(str+8, NULL, 0); + return NULL; + } else if (!strcmp(str, "rom")) { + pci_probe |= PCI_ASSIGN_ROMS; + return NULL; + } else if (!strcmp(str, "norom")) { + pci_probe |= PCI_NOASSIGN_ROMS; + return NULL; + } else if (!strcmp(str, "nobar")) { + pci_probe |= PCI_NOASSIGN_BARS; + return NULL; + } else if (!strcmp(str, "assign-busses")) { + pci_probe |= PCI_ASSIGN_ALL_BUSSES; + return NULL; + } else if (!strcmp(str, "use_crs")) { + pci_probe |= PCI_USE__CRS; + return NULL; + } else if (!strcmp(str, "nocrs")) { + pci_probe |= PCI_ROOT_NO_CRS; + return NULL; +#ifdef CONFIG_PHYS_ADDR_T_64BIT + } else if (!strcmp(str, "big_root_window")) { + pci_probe |= PCI_BIG_ROOT_WINDOW; + return NULL; +#endif + } else if (!strcmp(str, "routeirq")) { + pci_routeirq = 1; + return NULL; + } else if (!strcmp(str, "skip_isa_align")) { + pci_probe |= PCI_CAN_SKIP_ISA_ALIGN; + return NULL; + } else if (!strcmp(str, "noioapicquirk")) { + noioapicquirk = 1; + return NULL; + } else if (!strcmp(str, "ioapicreroute")) { + if (noioapicreroute != -1) + noioapicreroute = 0; + return NULL; + } else if (!strcmp(str, "noioapicreroute")) { + if (noioapicreroute != -1) + noioapicreroute = 1; + return NULL; + } + return str; +} + +unsigned int pcibios_assign_all_busses(void) +{ + return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0; +} + +static void set_dev_domain_options(struct pci_dev *pdev) +{ + if (is_vmd(pdev->bus)) + pdev->hotplug_user_indicators = 1; +} + +int pcibios_add_device(struct pci_dev *dev) +{ + struct pci_setup_rom *rom; + struct irq_domain *msidom; + struct setup_data *data; + u64 pa_data; + + pa_data = boot_params.hdr.setup_data; + while (pa_data) { + data = memremap(pa_data, sizeof(*rom), MEMREMAP_WB); + if (!data) + return -ENOMEM; + + if (data->type == SETUP_PCI) { + rom = (struct pci_setup_rom *)data; + + if ((pci_domain_nr(dev->bus) == rom->segment) && + (dev->bus->number == rom->bus) && + (PCI_SLOT(dev->devfn) == rom->device) && + (PCI_FUNC(dev->devfn) == rom->function) && + (dev->vendor == rom->vendor) && + (dev->device == rom->devid)) { + dev->rom = pa_data + + offsetof(struct pci_setup_rom, romdata); + dev->romlen = rom->pcilen; + } + } + pa_data = data->next; + memunmap(data); + } + set_dev_domain_options(dev); + + /* + * Setup the initial MSI domain of the device. If the underlying + * bus has a PCI/MSI irqdomain associated use the bus domain, + * otherwise set the default domain. This ensures that special irq + * domains e.g. VMD are preserved. The default ensures initial + * operation if irq remapping is not active. If irq remapping is + * active it will overwrite the domain pointer when the device is + * associated to a remapping domain. + */ + msidom = dev_get_msi_domain(&dev->bus->dev); + if (!msidom) + msidom = x86_pci_msi_default_domain; + dev_set_msi_domain(&dev->dev, msidom); + return 0; +} + +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + int err; + + if ((err = pci_enable_resources(dev, mask)) < 0) + return err; + + if (!pci_dev_msi_enabled(dev)) + return pcibios_enable_irq(dev); + return 0; +} + +void pcibios_disable_device (struct pci_dev *dev) +{ + if (!pci_dev_msi_enabled(dev) && pcibios_disable_irq) + pcibios_disable_irq(dev); +} + +#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC +void pcibios_release_device(struct pci_dev *dev) +{ + if (atomic_dec_return(&dev->enable_cnt) >= 0) + pcibios_disable_device(dev); + +} +#endif + +int pci_ext_cfg_avail(void) +{ + if (raw_pci_ext_ops) + return 1; + else + return 0; +} + +#if IS_ENABLED(CONFIG_VMD) +struct pci_dev *pci_real_dma_dev(struct pci_dev *dev) +{ + if (is_vmd(dev->bus)) + return to_pci_sysdata(dev->bus)->vmd_dev; + + return dev; +} +#endif |