diff options
Diffstat (limited to 'arch/x86/pci/fixup.c')
| -rw-r--r-- | arch/x86/pci/fixup.c | 847 |
1 files changed, 847 insertions, 0 deletions
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c new file mode 100644 index 000000000..3f3411b88 --- /dev/null +++ b/arch/x86/pci/fixup.c @@ -0,0 +1,847 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Exceptions for specific devices. Usually work-arounds for fatal design flaws. + */ + +#include <linux/delay.h> +#include <linux/dmi.h> +#include <linux/pci.h> +#include <linux/vgaarb.h> +#include <asm/amd_nb.h> +#include <asm/hpet.h> +#include <asm/pci_x86.h> + +static void pci_fixup_i450nx(struct pci_dev *d) +{ + /* + * i450NX -- Find and scan all secondary buses on all PXB's. + */ + int pxb, reg; + u8 busno, suba, subb; + + dev_warn(&d->dev, "Searching for i450NX host bridges\n"); + reg = 0xd0; + for(pxb = 0; pxb < 2; pxb++) { + pci_read_config_byte(d, reg++, &busno); + pci_read_config_byte(d, reg++, &suba); + pci_read_config_byte(d, reg++, &subb); + dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, + suba, subb); + if (busno) + pcibios_scan_root(busno); /* Bus A */ + if (suba < subb) + pcibios_scan_root(suba+1); /* Bus B */ + } + pcibios_last_bus = -1; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx); + +static void pci_fixup_i450gx(struct pci_dev *d) +{ + /* + * i450GX and i450KX -- Find and scan all secondary buses. + * (called separately for each PCI bridge found) + */ + u8 busno; + pci_read_config_byte(d, 0x4a, &busno); + dev_info(&d->dev, "i440KX/GX host bridge; secondary bus %02x\n", busno); + pcibios_scan_root(busno); + pcibios_last_bus = -1; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454GX, pci_fixup_i450gx); + +static void pci_fixup_umc_ide(struct pci_dev *d) +{ + /* + * UM8886BF IDE controller sets region type bits incorrectly, + * therefore they look like memory despite of them being I/O. + */ + int i; + + dev_warn(&d->dev, "Fixing base address flags\n"); + for(i = 0; i < 4; i++) + d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide); + +static void pci_fixup_latency(struct pci_dev *d) +{ + /* + * SiS 5597 and 5598 chipsets require latency timer set to + * at most 32 to avoid lockups. + */ + dev_dbg(&d->dev, "Setting max latency to 32\n"); + pcibios_max_latency = 32; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency); + +static void pci_fixup_piix4_acpi(struct pci_dev *d) +{ + /* + * PIIX4 ACPI device: hardwired IRQ9 + */ + d->irq = 9; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, pci_fixup_piix4_acpi); + +/* + * Addresses issues with problems in the memory write queue timer in + * certain VIA Northbridges. This bugfix is per VIA's specifications, + * except for the KL133/KM133: clearing bit 5 on those Northbridges seems + * to trigger a bug in its integrated ProSavage video card, which + * causes screen corruption. We only clear bits 6 and 7 for that chipset, + * until VIA can provide us with definitive information on why screen + * corruption occurs, and what exactly those bits do. + * + * VIA 8363,8622,8361 Northbridges: + * - bits 5, 6, 7 at offset 0x55 need to be turned off + * VIA 8367 (KT266x) Northbridges: + * - bits 5, 6, 7 at offset 0x95 need to be turned off + * VIA 8363 rev 0x81/0x84 (KL133/KM133) Northbridges: + * - bits 6, 7 at offset 0x55 need to be turned off + */ + +#define VIA_8363_KL133_REVISION_ID 0x81 +#define VIA_8363_KM133_REVISION_ID 0x84 + +static void pci_fixup_via_northbridge_bug(struct pci_dev *d) +{ + u8 v; + int where = 0x55; + int mask = 0x1f; /* clear bits 5, 6, 7 by default */ + + if (d->device == PCI_DEVICE_ID_VIA_8367_0) { + /* fix pci bus latency issues resulted by NB bios error + it appears on bug free^Wreduced kt266x's bios forces + NB latency to zero */ + pci_write_config_byte(d, PCI_LATENCY_TIMER, 0); + + where = 0x95; /* the memory write queue timer register is + different for the KT266x's: 0x95 not 0x55 */ + } else if (d->device == PCI_DEVICE_ID_VIA_8363_0 && + (d->revision == VIA_8363_KL133_REVISION_ID || + d->revision == VIA_8363_KM133_REVISION_ID)) { + mask = 0x3f; /* clear only bits 6 and 7; clearing bit 5 + causes screen corruption on the KL133/KM133 */ + } + + pci_read_config_byte(d, where, &v); + if (v & ~mask) { + dev_warn(&d->dev, "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \ + d->device, d->revision, where, v, mask, v & mask); + v &= mask; + pci_write_config_byte(d, where, v); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug); + +/* + * For some reasons Intel decided that certain parts of their + * 815, 845 and some other chipsets must look like PCI-to-PCI bridges + * while they are obviously not. The 82801 family (AA, AB, BAM/CAM, + * BA/CA/DB and E) PCI bridges are actually HUB-to-PCI ones, according + * to Intel terminology. These devices do forward all addresses from + * system to PCI bus no matter what are their window settings, so they are + * "transparent" (or subtractive decoding) from programmers point of view. + */ +static void pci_fixup_transparent_bridge(struct pci_dev *dev) +{ + if ((dev->device & 0xff00) == 0x2400) + dev->transparent = 1; +} +DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, + PCI_CLASS_BRIDGE_PCI, 8, pci_fixup_transparent_bridge); + +/* + * Fixup for C1 Halt Disconnect problem on nForce2 systems. + * + * From information provided by "Allen Martin" <AMartin@nvidia.com>: + * + * A hang is caused when the CPU generates a very fast CONNECT/HALT cycle + * sequence. Workaround is to set the SYSTEM_IDLE_TIMEOUT to 80 ns. + * This allows the state-machine and timer to return to a proper state within + * 80 ns of the CONNECT and probe appearing together. Since the CPU will not + * issue another HALT within 80 ns of the initial HALT, the failure condition + * is avoided. + */ +static void pci_fixup_nforce2(struct pci_dev *dev) +{ + u32 val; + + /* + * Chip Old value New value + * C17 0x1F0FFF01 0x1F01FF01 + * C18D 0x9F0FFF01 0x9F01FF01 + * + * Northbridge chip version may be determined by + * reading the PCI revision ID (0xC1 or greater is C18D). + */ + pci_read_config_dword(dev, 0x6c, &val); + + /* + * Apply fixup if needed, but don't touch disconnect state + */ + if ((val & 0x00FF0000) != 0x00010000) { + dev_warn(&dev->dev, "nForce2 C1 Halt Disconnect fixup\n"); + pci_write_config_dword(dev, 0x6c, (val & 0xFF00FFFF) | 0x00010000); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2); + +/* Max PCI Express root ports */ +#define MAX_PCIEROOT 6 +static int quirk_aspm_offset[MAX_PCIEROOT << 3]; + +#define GET_INDEX(a, b) ((((a) - PCI_DEVICE_ID_INTEL_MCH_PA) << 3) + ((b) & 7)) + +static int quirk_pcie_aspm_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) +{ + return raw_pci_read(pci_domain_nr(bus), bus->number, + devfn, where, size, value); +} + +/* + * Replace the original pci bus ops for write with a new one that will filter + * the request to insure ASPM cannot be enabled. + */ +static int quirk_pcie_aspm_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) +{ + u8 offset; + + offset = quirk_aspm_offset[GET_INDEX(bus->self->device, devfn)]; + + if ((offset) && (where == offset)) + value = value & ~PCI_EXP_LNKCTL_ASPMC; + + return raw_pci_write(pci_domain_nr(bus), bus->number, + devfn, where, size, value); +} + +static struct pci_ops quirk_pcie_aspm_ops = { + .read = quirk_pcie_aspm_read, + .write = quirk_pcie_aspm_write, +}; + +/* + * Prevents PCI Express ASPM (Active State Power Management) being enabled. + * + * Save the register offset, where the ASPM control bits are located, + * for each PCI Express device that is in the device list of + * the root port in an array for fast indexing. Replace the bus ops + * with the modified one. + */ +static void pcie_rootport_aspm_quirk(struct pci_dev *pdev) +{ + int i; + struct pci_bus *pbus; + struct pci_dev *dev; + + if ((pbus = pdev->subordinate) == NULL) + return; + + /* + * Check if the DID of pdev matches one of the six root ports. This + * check is needed in the case this function is called directly by the + * hot-plug driver. + */ + if ((pdev->device < PCI_DEVICE_ID_INTEL_MCH_PA) || + (pdev->device > PCI_DEVICE_ID_INTEL_MCH_PC1)) + return; + + if (list_empty(&pbus->devices)) { + /* + * If no device is attached to the root port at power-up or + * after hot-remove, the pbus->devices is empty and this code + * will set the offsets to zero and the bus ops to parent's bus + * ops, which is unmodified. + */ + for (i = GET_INDEX(pdev->device, 0); i <= GET_INDEX(pdev->device, 7); ++i) + quirk_aspm_offset[i] = 0; + + pci_bus_set_ops(pbus, pbus->parent->ops); + } else { + /* + * If devices are attached to the root port at power-up or + * after hot-add, the code loops through the device list of + * each root port to save the register offsets and replace the + * bus ops. + */ + list_for_each_entry(dev, &pbus->devices, bus_list) + /* There are 0 to 8 devices attached to this bus */ + quirk_aspm_offset[GET_INDEX(pdev->device, dev->devfn)] = + dev->pcie_cap + PCI_EXP_LNKCTL; + + pci_bus_set_ops(pbus, &quirk_pcie_aspm_ops); + dev_info(&pbus->dev, "writes to ASPM control bits will be ignored\n"); + } + +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA, pcie_rootport_aspm_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA1, pcie_rootport_aspm_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB, pcie_rootport_aspm_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB1, pcie_rootport_aspm_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC, pcie_rootport_aspm_quirk); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_rootport_aspm_quirk); + +/* + * Fixup to mark boot BIOS video selected by BIOS before it changes + * + * From information provided by "Jon Smirl" <jonsmirl@gmail.com> + * + * The standard boot ROM sequence for an x86 machine uses the BIOS + * to select an initial video card for boot display. This boot video + * card will have its BIOS copied to 0xC0000 in system RAM. + * IORESOURCE_ROM_SHADOW is used to associate the boot video + * card with this copy. On laptops this copy has to be used since + * the main ROM may be compressed or combined with another image. + * See pci_map_rom() for use of this flag. Before marking the device + * with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set + * by either arch code or vga-arbitration; if so only apply the fixup to this + * already-determined primary video card. + */ + +static void pci_fixup_video(struct pci_dev *pdev) +{ + struct pci_dev *bridge; + struct pci_bus *bus; + u16 config; + struct resource *res; + + /* Is VGA routed to us? */ + bus = pdev->bus; + while (bus) { + bridge = bus->self; + + /* + * From information provided by + * "David Miller" <davem@davemloft.net> + * The bridge control register is valid for PCI header + * type BRIDGE, or CARDBUS. Host to PCI controllers use + * PCI header type NORMAL. + */ + if (bridge && (pci_is_bridge(bridge))) { + pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, + &config); + if (!(config & PCI_BRIDGE_CTL_VGA)) + return; + } + bus = bus->parent; + } + if (!vga_default_device() || pdev == vga_default_device()) { + pci_read_config_word(pdev, PCI_COMMAND, &config); + if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { + res = &pdev->resource[PCI_ROM_RESOURCE]; + + pci_disable_rom(pdev); + if (res->parent) + release_resource(res); + + res->start = 0xC0000; + res->end = res->start + 0x20000 - 1; + res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW | + IORESOURCE_PCI_FIXED; + dev_info(&pdev->dev, "Video device with shadowed ROM at %pR\n", + res); + } + } +} +DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_video); + + +static const struct dmi_system_id msi_k8t_dmi_table[] = { + { + .ident = "MSI-K8T-Neo2Fir", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MSI"), + DMI_MATCH(DMI_PRODUCT_NAME, "MS-6702E"), + }, + }, + {} +}; + +/* + * The AMD-Athlon64 board MSI "K8T Neo2-FIR" disables the onboard sound + * card if a PCI-soundcard is added. + * + * The BIOS only gives options "DISABLED" and "AUTO". This code sets + * the corresponding register-value to enable the soundcard. + * + * The soundcard is only enabled, if the mainborad is identified + * via DMI-tables and the soundcard is detected to be off. + */ +static void pci_fixup_msi_k8t_onboard_sound(struct pci_dev *dev) +{ + unsigned char val; + if (!dmi_check_system(msi_k8t_dmi_table)) + return; /* only applies to MSI K8T Neo2-FIR */ + + pci_read_config_byte(dev, 0x50, &val); + if (val & 0x40) { + pci_write_config_byte(dev, 0x50, val & (~0x40)); + + /* verify the change for status output */ + pci_read_config_byte(dev, 0x50, &val); + if (val & 0x40) + dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; " + "can't enable onboard soundcard!\n"); + else + dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; " + "enabled onboard soundcard\n"); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, + pci_fixup_msi_k8t_onboard_sound); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, + pci_fixup_msi_k8t_onboard_sound); + +/* + * Some Toshiba laptops need extra code to enable their TI TSB43AB22/A. + * + * We pretend to bring them out of full D3 state, and restore the proper + * IRQ, PCI cache line size, and BARs, otherwise the device won't function + * properly. In some cases, the device will generate an interrupt on + * the wrong IRQ line, causing any devices sharing the line it's + * *supposed* to use to be disabled by the kernel's IRQ debug code. + */ +static u16 toshiba_line_size; + +static const struct dmi_system_id toshiba_ohci1394_dmi_table[] = { + { + .ident = "Toshiba PS5 based laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_VERSION, "PS5"), + }, + }, + { + .ident = "Toshiba PSM4 based laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_VERSION, "PSM4"), + }, + }, + { + .ident = "Toshiba A40 based laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_VERSION, "PSA40U"), + }, + }, + { } +}; + +static void pci_pre_fixup_toshiba_ohci1394(struct pci_dev *dev) +{ + if (!dmi_check_system(toshiba_ohci1394_dmi_table)) + return; /* only applies to certain Toshibas (so far) */ + + dev->current_state = PCI_D3cold; + pci_read_config_word(dev, PCI_CACHE_LINE_SIZE, &toshiba_line_size); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0x8032, + pci_pre_fixup_toshiba_ohci1394); + +static void pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev) +{ + if (!dmi_check_system(toshiba_ohci1394_dmi_table)) + return; /* only applies to certain Toshibas (so far) */ + + /* Restore config space on Toshiba laptops */ + pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, toshiba_line_size); + pci_read_config_byte(dev, PCI_INTERRUPT_LINE, (u8 *)&dev->irq); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, + pci_resource_start(dev, 0)); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, + pci_resource_start(dev, 1)); +} +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_TI, 0x8032, + pci_post_fixup_toshiba_ohci1394); + + +/* + * Prevent the BIOS trapping accesses to the Cyrix CS5530A video device + * configuration space. + */ +static void pci_early_fixup_cyrix_5530(struct pci_dev *dev) +{ + u8 r; + /* clear 'F4 Video Configuration Trap' bit */ + pci_read_config_byte(dev, 0x42, &r); + r &= 0xfd; + pci_write_config_byte(dev, 0x42, r); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, + pci_early_fixup_cyrix_5530); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, + pci_early_fixup_cyrix_5530); + +/* + * Siemens Nixdorf AG FSC Multiprocessor Interrupt Controller: + * prevent update of the BAR0, which doesn't look like a normal BAR. + */ +static void pci_siemens_interrupt_controller(struct pci_dev *dev) +{ + dev->resource[0].flags |= IORESOURCE_PCI_FIXED; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SIEMENS, 0x0015, + pci_siemens_interrupt_controller); + +/* + * SB600: Disable BAR1 on device 14.0 to avoid HPET resources from + * confusing the PCI engine: + */ +static void sb600_disable_hpet_bar(struct pci_dev *dev) +{ + u8 val; + + /* + * The SB600 and SB700 both share the same device + * ID, but the PM register 0x55 does something different + * for the SB700, so make sure we are dealing with the + * SB600 before touching the bit: + */ + + pci_read_config_byte(dev, 0x08, &val); + + if (val < 0x2F) { + outb(0x55, 0xCD6); + val = inb(0xCD7); + + /* Set bit 7 in PM register 0x55 */ + outb(0x55, 0xCD6); + outb(val | 0x80, 0xCD7); + } +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, 0x4385, sb600_disable_hpet_bar); + +#ifdef CONFIG_HPET_TIMER +static void sb600_hpet_quirk(struct pci_dev *dev) +{ + struct resource *r = &dev->resource[1]; + + if (r->flags & IORESOURCE_MEM && r->start == hpet_address) { + r->flags |= IORESOURCE_PCI_FIXED; + dev_info(&dev->dev, "reg 0x14 contains HPET; making it immovable\n"); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, 0x4385, sb600_hpet_quirk); +#endif + +/* + * Twinhead H12Y needs us to block out a region otherwise we map devices + * there and any access kills the box. + * + * See: https://bugzilla.kernel.org/show_bug.cgi?id=10231 + * + * Match off the LPC and svid/sdid (older kernels lose the bridge subvendor) + */ +static void twinhead_reserve_killing_zone(struct pci_dev *dev) +{ + if (dev->subsystem_vendor == 0x14FF && dev->subsystem_device == 0xA003) { + pr_info("Reserving memory on Twinhead H12Y\n"); + request_mem_region(0xFFB00000, 0x100000, "twinhead"); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone); + +/* + * Device [8086:2fc0] + * Erratum HSE43 + * CONFIG_TDP_NOMINAL CSR Implemented at Incorrect Offset + * https://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html + * + * Devices [8086:6f60,6fa0,6fc0] + * Erratum BDF2 + * PCI BARs in the Home Agent Will Return Non-Zero Values During Enumeration + * https://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html + */ +static void pci_invalid_bar(struct pci_dev *dev) +{ + dev->non_compliant_bars = 1; +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0xa1ec, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0xa1ed, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0xa26c, pci_invalid_bar); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0xa26d, pci_invalid_bar); + +/* + * Device [1022:7808] + * 23. USB Wake on Connect/Disconnect with Low Speed Devices + * https://support.amd.com/TechDocs/46837.pdf + * Appendix A2 + * https://support.amd.com/TechDocs/42413.pdf + */ +static void pci_fixup_amd_ehci_pme(struct pci_dev *dev) +{ + dev_info(&dev->dev, "PME# does not work under D3, disabling it\n"); + dev->pme_support &= ~((PCI_PM_CAP_PME_D3hot | PCI_PM_CAP_PME_D3cold) + >> PCI_PM_CAP_PME_SHIFT); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x7808, pci_fixup_amd_ehci_pme); + +/* + * Device [1022:7914] + * When in D0, PME# doesn't get asserted when plugging USB 2.0 device. + */ +static void pci_fixup_amd_fch_xhci_pme(struct pci_dev *dev) +{ + dev_info(&dev->dev, "PME# does not work under D0, disabling it\n"); + dev->pme_support &= ~(PCI_PM_CAP_PME_D0 >> PCI_PM_CAP_PME_SHIFT); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x7914, pci_fixup_amd_fch_xhci_pme); + +/* + * Apple MacBook Pro: Avoid [mem 0x7fa00000-0x7fbfffff] + * + * Using the [mem 0x7fa00000-0x7fbfffff] region, e.g., by assigning it to + * the 00:1c.0 Root Port, causes a conflict with [io 0x1804], which is used + * for soft poweroff and suspend-to-RAM. + * + * As far as we know, this is related to the address space, not to the Root + * Port itself. Attaching the quirk to the Root Port is a convenience, but + * it could probably also be a standalone DMI quirk. + * + * https://bugzilla.kernel.org/show_bug.cgi?id=103211 + */ +static void quirk_apple_mbp_poweroff(struct pci_dev *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + + if ((!dmi_match(DMI_PRODUCT_NAME, "MacBookPro11,4") && + !dmi_match(DMI_PRODUCT_NAME, "MacBookPro11,5")) || + pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(0x1c, 0)) + return; + + res = request_mem_region(0x7fa00000, 0x200000, + "MacBook Pro poweroff workaround"); + if (res) + dev_info(dev, "claimed %s %pR\n", res->name, res); + else + dev_info(dev, "can't work around MacBook Pro poweroff issue\n"); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x8c10, quirk_apple_mbp_poweroff); + +/* + * VMD-enabled root ports will change the source ID for all messages + * to the VMD device. Rather than doing device matching with the source + * ID, the AER driver should traverse the child device tree, reading + * AER registers to find the faulting device. + */ +static void quirk_no_aersid(struct pci_dev *pdev) +{ + /* VMD Domain */ + if (is_vmd(pdev->bus) && pci_is_root_bus(pdev->bus)) + pdev->bus->bus_flags |= PCI_BUS_FLAGS_NO_AERSID; +} +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, + PCI_CLASS_BRIDGE_PCI, 8, quirk_no_aersid); + +static void quirk_intel_th_dnv(struct pci_dev *dev) +{ + struct resource *r = &dev->resource[4]; + + /* + * Denverton reports 2k of RTIT_BAR (intel_th resource 4), which + * appears to be 4 MB in reality. + */ + if (r->end == r->start + 0x7ff) { + r->start = 0; + r->end = 0x3fffff; + r->flags |= IORESOURCE_UNSET; + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x19e1, quirk_intel_th_dnv); + +#ifdef CONFIG_PHYS_ADDR_T_64BIT + +#define AMD_141b_MMIO_BASE(x) (0x80 + (x) * 0x8) +#define AMD_141b_MMIO_BASE_RE_MASK BIT(0) +#define AMD_141b_MMIO_BASE_WE_MASK BIT(1) +#define AMD_141b_MMIO_BASE_MMIOBASE_MASK GENMASK(31,8) + +#define AMD_141b_MMIO_LIMIT(x) (0x84 + (x) * 0x8) +#define AMD_141b_MMIO_LIMIT_MMIOLIMIT_MASK GENMASK(31,8) + +#define AMD_141b_MMIO_HIGH(x) (0x180 + (x) * 0x4) +#define AMD_141b_MMIO_HIGH_MMIOBASE_MASK GENMASK(7,0) +#define AMD_141b_MMIO_HIGH_MMIOLIMIT_SHIFT 16 +#define AMD_141b_MMIO_HIGH_MMIOLIMIT_MASK GENMASK(23,16) + +/* + * The PCI Firmware Spec, rev 3.2, notes that ACPI should optionally allow + * configuring host bridge windows using the _PRS and _SRS methods. + * + * But this is rarely implemented, so we manually enable a large 64bit BAR for + * PCIe device on AMD Family 15h (Models 00h-1fh, 30h-3fh, 60h-7fh) Processors + * here. + */ +static void pci_amd_enable_64bit_bar(struct pci_dev *dev) +{ + static const char *name = "PCI Bus 0000:00"; + struct resource *res, *conflict; + u32 base, limit, high; + struct pci_dev *other; + unsigned i; + + if (!(pci_probe & PCI_BIG_ROOT_WINDOW)) + return; + + /* Check that we are the only device of that type */ + other = pci_get_device(dev->vendor, dev->device, NULL); + if (other != dev || + (other = pci_get_device(dev->vendor, dev->device, other))) { + /* This is a multi-socket system, don't touch it for now */ + pci_dev_put(other); + return; + } + + for (i = 0; i < 8; i++) { + pci_read_config_dword(dev, AMD_141b_MMIO_BASE(i), &base); + pci_read_config_dword(dev, AMD_141b_MMIO_HIGH(i), &high); + + /* Is this slot free? */ + if (!(base & (AMD_141b_MMIO_BASE_RE_MASK | + AMD_141b_MMIO_BASE_WE_MASK))) + break; + + base >>= 8; + base |= high << 24; + + /* Abort if a slot already configures a 64bit BAR. */ + if (base > 0x10000) + return; + } + if (i == 8) + return; + + res = kzalloc(sizeof(*res), GFP_KERNEL); + if (!res) + return; + + /* + * Allocate a 256GB window directly below the 0xfd00000000 hardware + * limit (see AMD Family 15h Models 30h-3Fh BKDG, sec 2.4.6). + */ + res->name = name; + res->flags = IORESOURCE_PREFETCH | IORESOURCE_MEM | + IORESOURCE_MEM_64 | IORESOURCE_WINDOW; + res->start = 0xbd00000000ull; + res->end = 0xfd00000000ull - 1; + + conflict = request_resource_conflict(&iomem_resource, res); + if (conflict) { + kfree(res); + if (conflict->name != name) + return; + + /* We are resuming from suspend; just reenable the window */ + res = conflict; + } else { + dev_info(&dev->dev, "adding root bus resource %pR (tainting kernel)\n", + res); + add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK); + pci_bus_add_resource(dev->bus, res, 0); + } + + base = ((res->start >> 8) & AMD_141b_MMIO_BASE_MMIOBASE_MASK) | + AMD_141b_MMIO_BASE_RE_MASK | AMD_141b_MMIO_BASE_WE_MASK; + limit = ((res->end + 1) >> 8) & AMD_141b_MMIO_LIMIT_MMIOLIMIT_MASK; + high = ((res->start >> 40) & AMD_141b_MMIO_HIGH_MMIOBASE_MASK) | + ((((res->end + 1) >> 40) << AMD_141b_MMIO_HIGH_MMIOLIMIT_SHIFT) + & AMD_141b_MMIO_HIGH_MMIOLIMIT_MASK); + + pci_write_config_dword(dev, AMD_141b_MMIO_HIGH(i), high); + pci_write_config_dword(dev, AMD_141b_MMIO_LIMIT(i), limit); + pci_write_config_dword(dev, AMD_141b_MMIO_BASE(i), base); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x1401, pci_amd_enable_64bit_bar); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x141b, pci_amd_enable_64bit_bar); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x1571, pci_amd_enable_64bit_bar); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15b1, pci_amd_enable_64bit_bar); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x1601, pci_amd_enable_64bit_bar); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x1401, pci_amd_enable_64bit_bar); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x141b, pci_amd_enable_64bit_bar); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x1571, pci_amd_enable_64bit_bar); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x15b1, pci_amd_enable_64bit_bar); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x1601, pci_amd_enable_64bit_bar); + +#define RS690_LOWER_TOP_OF_DRAM2 0x30 +#define RS690_LOWER_TOP_OF_DRAM2_VALID 0x1 +#define RS690_UPPER_TOP_OF_DRAM2 0x31 +#define RS690_HTIU_NB_INDEX 0xA8 +#define RS690_HTIU_NB_INDEX_WR_ENABLE 0x100 +#define RS690_HTIU_NB_DATA 0xAC + +/* + * Some BIOS implementations support RAM above 4GB, but do not configure the + * PCI host to respond to bus master accesses for these addresses. These + * implementations set the TOP_OF_DRAM_SLOT1 register correctly, so PCI DMA + * works as expected for addresses below 4GB. + * + * Reference: "AMD RS690 ASIC Family Register Reference Guide" (pg. 2-57) + * https://www.amd.com/system/files/TechDocs/43372_rs690_rrg_3.00o.pdf + */ +static void rs690_fix_64bit_dma(struct pci_dev *pdev) +{ + u32 val = 0; + phys_addr_t top_of_dram = __pa(high_memory - 1) + 1; + + if (top_of_dram <= (1ULL << 32)) + return; + + pci_write_config_dword(pdev, RS690_HTIU_NB_INDEX, + RS690_LOWER_TOP_OF_DRAM2); + pci_read_config_dword(pdev, RS690_HTIU_NB_DATA, &val); + + if (val) + return; + + pci_info(pdev, "Adjusting top of DRAM to %pa for 64-bit DMA support\n", &top_of_dram); + + pci_write_config_dword(pdev, RS690_HTIU_NB_INDEX, + RS690_UPPER_TOP_OF_DRAM2 | RS690_HTIU_NB_INDEX_WR_ENABLE); + pci_write_config_dword(pdev, RS690_HTIU_NB_DATA, top_of_dram >> 32); + + pci_write_config_dword(pdev, RS690_HTIU_NB_INDEX, + RS690_LOWER_TOP_OF_DRAM2 | RS690_HTIU_NB_INDEX_WR_ENABLE); + pci_write_config_dword(pdev, RS690_HTIU_NB_DATA, + top_of_dram | RS690_LOWER_TOP_OF_DRAM2_VALID); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7910, rs690_fix_64bit_dma); + +#endif + +#ifdef CONFIG_AMD_NB + +#define AMD_15B8_RCC_DEV2_EPF0_STRAP2 0x10136008 +#define AMD_15B8_RCC_DEV2_EPF0_STRAP2_NO_SOFT_RESET_DEV2_F0_MASK 0x00000080L + +static void quirk_clear_strap_no_soft_reset_dev2_f0(struct pci_dev *dev) +{ + u32 data; + + if (!amd_smn_read(0, AMD_15B8_RCC_DEV2_EPF0_STRAP2, &data)) { + data &= ~AMD_15B8_RCC_DEV2_EPF0_STRAP2_NO_SOFT_RESET_DEV2_F0_MASK; + if (amd_smn_write(0, AMD_15B8_RCC_DEV2_EPF0_STRAP2, data)) + pci_err(dev, "Failed to write data 0x%x\n", data); + } else { + pci_err(dev, "Failed to read data\n"); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15b8, quirk_clear_strap_no_soft_reset_dev2_f0); +#endif |