diff options
Diffstat (limited to '')
| -rw-r--r-- | debian/README.source | 318 |
1 files changed, 318 insertions, 0 deletions
diff --git a/debian/README.source b/debian/README.source new file mode 100644 index 000000000..096ca5064 --- /dev/null +++ b/debian/README.source @@ -0,0 +1,318 @@ +Checklist for uploaders +======================= + +There is a checklist in the kernel-team.git repository; see +<https://salsa.debian.org/kernel-team/kernel-team/-/blob/master/docs/kernel-upload-checklist.md>. + +Updating the upstream source +============================ + +In addition to the build-dependencies, you will need the rsync package +installed. + +1) It is recommended to fetch the release tag from the relevant upstream git + repository, one of: + + * https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git + * https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git + * git://kernel.ubuntu.com/ubuntu/linux.git + + However, it is also possible to use upstream tarball and patch releases. + Both tags and files should be signed by the relevant maintainer, which + you *must* verify using commands such as: + + $ git tag -v v4.5 + $ xzcat linux-4.5.tar.xz | gpg --verify linux-4.5.tar.sign - + $ xzcat patch-4.5.1.xz | gpg --verify patch-4.5.1.sign - + + The upstream maintainers' key fingerprints are: + + pub 2048R/00411886 2011-09-20 + Key fingerprint = ABAF 11C6 5A29 70B1 30AB E3C4 79BE 3E43 0041 1886 + uid Linus Torvalds <torvalds@linux-foundation.org> + sub 2048R/012F54CA 2011-09-20 + + pub 4096R/6092693E 2011-09-23 + Key fingerprint = 647F 2865 4894 E3BD 4571 99BE 38DB BDC8 6092 693E + uid Greg Kroah-Hartman (Linux kernel stable release signing key) <greg@kroah.com> + sub 4096R/76D54749 2011-09-23 + + pub 4096R/FDCE24FC 2011-12-10 + Key fingerprint = D4E1 E317 4470 9144 B0F8 101A DB74 AEB8 FDCE 24FC + uid Luis Henriques <luis.henriques@canonical.com> + uid Luis Henriques <henrix@camandro.org> + sub 4096R/EFBC394A 2011-12-10 + +2) Run: ./debian/bin/genorig.py <repository> + or: ./debian/bin/genorig.py <tarball> [patch] + + This will produce ../orig/linux_<version>.orig.tar.xz + (e.g. linux_3.5~rc1.orig.tar.xz). + + It involves deleting files for DFSG compliance, as listed in the + Files-Excluded field in debian/copyright. + +3) Run: make -f debian/rules orig + + This will apply the main quilt series to the upstream source, which + will usually fail due to conflicts with upstream changes. You need + to resolve those by dropping or refreshing patches. + +Recording updates in the changelog +---------------------------------- + +Upstream commits that we already cherry-picked and included in a +previous package upload should not be mentioned, since they don't make +any difference to the package. Any other commits that fix a Debian +bug report and/or a security issue with a CVE ID should always be +listed, along with the (Closes: #nnnnnn) and/or (CVE-yyyy-nnnn) +reference. + +Aside from those general rules: + +* For an upstream release candidate, don't attempt to list the changes + +* For a stable release by Linus, refer to the summary at + kernelnewbies.org, e.g. https://kernelnewbies.org/Linux_4.5 + +* For a stable update, refer to the changelog on kernel.org, e.g. + https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.5.1, and + list all changes that are relevant to our package and that fix bugs + that we would consider 'important' or higher severity + + - The script debian/bin/stable-update updates the changelog + version and inserts the list of changes. It doesn't attempt to + filter out irrelevant or unimportant changes. + + - If you have time, please delete irrelevant changes such as: + + Fixes for architectures not supported by the package + + Fixes for drivers that aren't enabled in any of our configurations + + Build fixes for configurations that we don't use + + Fixes for lockdep false positives + +If you have time, please add bracketted prefixes to the upstream +change list as described below under "Changelog conventions". + +Applying patches to the Debian kernel tree +========================================== + +The Debian kernel packaging uses the quilt patch system, but with +multiple series to allow for featuresets. + +Patches are stored below debian/patches, loosely sorted in bugfix/, +features/ and debian/. Patches are in the standard kernel patch +format (unified diff to be applied with patch -p1) and generally have +DEP-3 headers. + +For each optional featureset there is an additional patch directory +debian/patches-<featureset>. + +If you want to generate a source tree with all patches applied, run +make -f debian/rules source + +The resulting source can be found below debian/build. + +Changelog conventions +===================== + +If a change only affects some architectures, flavours or featuresets, +this should be noted with a bracketted prefix on the changelog line: + +* [<fset>] Change to featureset <fset> +* [<arch>] Change that affects Debian architecture <arch> +* [<arch1>,<arch2>...] Change that affects Debian architectures + <arch1>, <arch2>, ... +* [<arch>/<flavour>] Change that affects kernel flavour <flavour> + on Debian architecture <arch> +* [<arch>/{<flavour1>,<flavour2>...}] Change that affects kernel + flavours <flavour1>, <flavour2>, ... on Debian architecture <arch> + +You can use wildcards to cover multiple values, e.g. 'arm*' for armel, +armhf and arm64 architectures. Also 'x86' is used to cover the Debian +architectures amd64, i386 and x32. + +Kernel config files +=================== + +Each kernel configuration file is constructed dynamically from a +number of files under debian/config and (if it exists) +debian/config.local. They are read in the following order, such that +files later on the list can override settings from earlier files. +Files in debian/config.local can also override settings from the +corresponding file in debian/config. Most of the files are optional +and the filenames can generally be overridden by explicit lists +(possibly empty) specified in the 'defines' files. + +1. Common: + - Default filename: config + - Filename list: [image]configs in defines +2. Per kernel architecture: + - Filename: kernelarch-<karch>/config (optional) +3. Per architecture: + - Default filename: <arch>/config + - Filename list: [image]configs in <arch>/defines +4. Per architecture and flavour: + - Default filename: <arch>/config.<flavour> (optional) + - Filename list: [<flavour>_image]configs in <arch>/defines +5. Per featureset: + - Default filename: featureset-<fset>/config (optional) + - Filename list: [image]configs in featureset-<fset>/defines +6. Per architecture and featureset: + - Default filename: <arch>/<fset>/config (optional) + - Filename list: [image]configs in <arch>/<fset>/defines +7. Per architecture, featureset, and flavour: + - Default filename: <arch>/<fset>/config.<flavour> (optional) + - Filename list: [<flavour>_image]configs in <arch>/<fset>/defines + +You can check the final list of configuration files by reading +debian/rules.gen. Each binary-arch_<arch>_<fset>_<flavour>_real +rule passes the list to debian/rules.real as the KCONFIG variable. + +These files should be kept in order using the kconfigeditor2 +utility from <https://salsa.debian.org/kernel-team/kernel-team>. +With this source package as your working directory, run: + + debian/rules source + .../kernel-team/utils/kconfigeditor2/process.py . + +This will also warn about any symbols that no longer exist, or +cannot be explicitly configured. + +Control file +============ +The master control file debian/control must be generated before +the package is uploaded. debian/rules contains the debian/control +target, which generates the control file by invoking the +debian/bin/gencontrol.py script, which combines the templates from +the templates directory and architecture-specific defines file to +produce the debian/control file. Note that this target is intentionally +made to fail with a non-zero exit code to make sure that it is never +run during an automatic build. The following variables are substituted +into the templates: + +@version@ Upstream kernel version, for example 2.6.11. +@arch@ The Debian arch name, such as powerpc or i386. +@flavour@ The build flavour, such as 686 or k7-smp. +@class@ The CPU/architecture class; displayed in synopsis. It should + be fairly short, as the synopsis is supposed to be <80 chars. + It should be in the form "foo class", and will show up in the + description as "foo class machines". +@longclass@ The CPU/architecture class; displayed in the extended + description. The same rules apply as in @class@. If + this is unset, it will default to @class@. +@desc@ (Potentially) multi-line verbiage that's appended to + -image descriptions. +@abiname@ Current abiname, a single digit. + +Normally, the arch-specific contents should be controlled by +adjusting the corresponding defines file. + +Build-dependencies that relate to specific binary packages can be +specified in a Build-Depends field in the template for that binary +package. gencontrol.py will append the value to the source package's +Build-Depends-Arch or Build-Depends-Indep field, as appropriate. It +will also use the binary package's Architecture and Build-Profile as +the architecture-qualification and/or restriction for each build- +dependency that doesn't already have them. + +TODO: +- Patches applied to the upstream source +- How to define a flavour +- More detail on generation of debian/control and configs + +Running tests +============= + +linux supports autopkgtest and should be able to run most of the +kernel's self-tests on any architecture where kexec is supported, +but it has higher resource requirements than most packages: + +- A VM with plenty of disk space (10GB is enough), RAM (1GB is + probably enough) and at least 2 CPUs +- The temporary directory for adt-virt-qemu (-o option) will need + several GB of space, so a tmpfs may not be suitable + +Note that if you tell adt-run to use an 'unbuilt tree' (i.e. an +unpacked source package) it does not exclude VCS directories such as +.git. Either use a packed source package or copy the working tree +elsewhere excluding .git. + +Example invocation: + + adt-run -B ../linux-image-4.2.0-rc6-amd64_4.2~rc6-1~exp2_amd64.deb \ + ../linux_4.2~rc6-1~exp2.dsc \ + --timeout-test=1200 \ + --- adt-virt-qemu /var/cache/autopkgtest/adt-sid.img -o /var/tmp -c 2 + +Build profiles +============== + +Several build profiles are understood and supported: + +- stage1: Needed when bootstrapping an architecture. A stage1 build + produces only the linux-libc-dev package and has no host + build-dependencies. +- nodoc: Exclude most documentation +- noudeb: Exclude installer udeb packages +- pkg.linux.notools: Exclude userland tool packages (linux-kbuild-<version>, + linux-perf-<version>, etc.) +- pkg.linux.mintools: Build minimal set of userland tool packages + (linux-kbuild-<version>, linux-bootwrapper-<abiname> on powerpc/ppc64) +- pkg.linux.nokernel: Exclude kernel image and header packages +- pkg.linux.nosource: Exclude source binary package (linux-source-<version>) +- cross: Needed when cross-building. Currently this must be used together + with nopython as the build-dependencies will be unsatisfiable otherwise. +- nopython: Disable Python bindings. This currently disables building the + linux-perf-<version> package, as the perf program embeds Python. +- pkg.linux.nometa: Exclude most meta-packages. The linux-compiler-* and + linux-headers-*-all* packages can still be built. + +Build rules +=========== + +The Debian build rules are split across multiple makefiles: + +- debian/rules: Standard top-level makefile for Debian package build. +- debian/rules.gen: Intermediate makefile between debian/rules and + debian/rules.real. This is generated by gencontrol.py based on + the configuration under debian/config. +- debian/rules.real: Makefile for building a single kernel flavour + or other group of binary packages. +- debian/rules.d: Makefiles for building userland code from specific + source directories. The directory structure mirrors the kernel + source directories. debian/rules.real uses the "make-tools" to + invoke these makefiles. + +All builds *must* be done out-of-tree in a subdirectory of +debian/build, so that the output files do not end up in the +linux-source-<version> binary package. Currently kernel builds use +debian/build/build_<arch>_<featureset>_<flavour>, userland code uses +debian/build/build-tools/<source-dir> and documentation uses +debian/build/build-doc. + +Code signing +============ + +The kernel image and modules may be signed after building, to support +a Secure Boot or Trusted Boot policy. In Debian, this is performed by +a "code signing service" that is separate from the normal package +build process. + +The initial package build generates binary packages named +linux-image-<arch>-signed-template, that contain a source package +template and metadata about the files to be signed. The code signing +service will download this and the linux-image packages to be signed. +It will add detached signatures to the source package, then upload it +(without ever running debian/rules). + +The source package template is generated by +debian/bin/gencontrol_signed.py and debian/rules.real with files from +debian/signing_templates and debian/templates. To test changes to +these: + +1. Build the linux source package. +2. Generate the signed source package by running the script + "debian-test-sign" from the kernel-team.git repository. It is + also possible to set up a development configuration of the + official code signing service, but this is more complicated. +3. Build the signed source package. |