diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/ata/pata_atiixp.c | 318 |
1 files changed, 318 insertions, 0 deletions
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c new file mode 100644 index 000000000..c68aa3f58 --- /dev/null +++ b/drivers/ata/pata_atiixp.c @@ -0,0 +1,318 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * pata_atiixp.c - ATI PATA for new ATA layer + * (C) 2005 Red Hat Inc + * (C) 2009-2010 Bartlomiej Zolnierkiewicz + * + * Based on + * + * linux/drivers/ide/pci/atiixp.c Version 0.01-bart2 Feb. 26, 2004 + * + * Copyright (C) 2003 ATI Inc. <hyu@ati.com> + * Copyright (C) 2004 Bartlomiej Zolnierkiewicz + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <linux/dmi.h> + +#define DRV_NAME "pata_atiixp" +#define DRV_VERSION "0.4.6" + +enum { + ATIIXP_IDE_PIO_TIMING = 0x40, + ATIIXP_IDE_MWDMA_TIMING = 0x44, + ATIIXP_IDE_PIO_CONTROL = 0x48, + ATIIXP_IDE_PIO_MODE = 0x4a, + ATIIXP_IDE_UDMA_CONTROL = 0x54, + ATIIXP_IDE_UDMA_MODE = 0x56 +}; + +static const struct dmi_system_id attixp_cable_override_dmi_table[] = { + { + /* Board has onboard PATA<->SATA converters */ + .ident = "MSI E350DM-E33", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "MSI"), + DMI_MATCH(DMI_BOARD_NAME, "E350DM-E33(MS-7720)"), + }, + }, + { } +}; + +static int atiixp_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 udma; + + if (dmi_check_system(attixp_cable_override_dmi_table)) + return ATA_CBL_PATA40_SHORT; + + /* Hack from drivers/ide/pci. Really we want to know how to do the + raw detection not play follow the bios mode guess */ + pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma); + if ((udma & 0x07) >= 0x04 || (udma & 0x70) >= 0x40) + return ATA_CBL_PATA80; + return ATA_CBL_PATA40; +} + +static DEFINE_SPINLOCK(atiixp_lock); + +/** + * atiixp_prereset - perform reset handling + * @link: ATA link + * @deadline: deadline jiffies for the operation + * + * Reset sequence checking enable bits to see which ports are + * active. + */ + +static int atiixp_prereset(struct ata_link *link, unsigned long deadline) +{ + static const struct pci_bits atiixp_enable_bits[] = { + { 0x48, 1, 0x01, 0x00 }, + { 0x48, 1, 0x08, 0x00 } + }; + + struct ata_port *ap = link->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no])) + return -ENOENT; + + return ata_sff_prereset(link, deadline); +} + +/** + * atiixp_set_pio_timing - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called by both the pio and dma setup functions to set the controller + * timings for PIO transfers. We must load both the mode number and + * timing values into the controller. + */ + +static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio) +{ + static u8 pio_timings[5] = { 0x5D, 0x47, 0x34, 0x22, 0x20 }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = 2 * ap->port_no + adev->devno; + int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1); + u32 pio_timing_data; + u16 pio_mode_data; + + pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data); + pio_mode_data &= ~(0x7 << (4 * dn)); + pio_mode_data |= pio << (4 * dn); + pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data); + + pci_read_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data); + pio_timing_data &= ~(0xFF << timing_shift); + pio_timing_data |= (pio_timings[pio] << timing_shift); + pci_write_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data); +} + +/** + * atiixp_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. We use a shared helper for this + * as the DMA setup must also adjust the PIO timing information. + */ + +static void atiixp_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + unsigned long flags; + spin_lock_irqsave(&atiixp_lock, flags); + atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0); + spin_unlock_irqrestore(&atiixp_lock, flags); +} + +/** + * atiixp_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the DMA mode setup. We use timing tables for most + * modes but must tune an appropriate PIO mode to match. + */ + +static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static u8 mwdma_timings[5] = { 0x77, 0x21, 0x20 }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dma = adev->dma_mode; + int dn = 2 * ap->port_no + adev->devno; + int wanted_pio; + unsigned long flags; + + spin_lock_irqsave(&atiixp_lock, flags); + + if (adev->dma_mode >= XFER_UDMA_0) { + u16 udma_mode_data; + + dma -= XFER_UDMA_0; + + pci_read_config_word(pdev, ATIIXP_IDE_UDMA_MODE, &udma_mode_data); + udma_mode_data &= ~(0x7 << (4 * dn)); + udma_mode_data |= dma << (4 * dn); + pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data); + } else { + int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1); + u32 mwdma_timing_data; + + dma -= XFER_MW_DMA_0; + + pci_read_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING, + &mwdma_timing_data); + mwdma_timing_data &= ~(0xFF << timing_shift); + mwdma_timing_data |= (mwdma_timings[dma] << timing_shift); + pci_write_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING, + mwdma_timing_data); + } + /* + * We must now look at the PIO mode situation. We may need to + * adjust the PIO mode to keep the timings acceptable + */ + if (adev->dma_mode >= XFER_MW_DMA_2) + wanted_pio = 4; + else if (adev->dma_mode == XFER_MW_DMA_1) + wanted_pio = 3; + else if (adev->dma_mode == XFER_MW_DMA_0) + wanted_pio = 0; + else BUG(); + + if (adev->pio_mode != wanted_pio) + atiixp_set_pio_timing(ap, adev, wanted_pio); + spin_unlock_irqrestore(&atiixp_lock, flags); +} + +/** + * atiixp_bmdma_start - DMA start callback + * @qc: Command in progress + * + * When DMA begins we need to ensure that the UDMA control + * register for the channel is correctly set. + * + * Note: The host lock held by the libata layer protects + * us from two channels both trying to set DMA bits at once + */ + +static void atiixp_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = (2 * ap->port_no) + adev->devno; + u16 tmp16; + + pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); + if (ata_using_udma(adev)) + tmp16 |= (1 << dn); + else + tmp16 &= ~(1 << dn); + pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16); + ata_bmdma_start(qc); +} + +/** + * atiixp_dma_stop - DMA stop callback + * @qc: Command in progress + * + * DMA has completed. Clear the UDMA flag as the next operations will + * be PIO ones not UDMA data transfer. + * + * Note: The host lock held by the libata layer protects + * us from two channels both trying to set DMA bits at once + */ + +static void atiixp_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + int dn = (2 * ap->port_no) + qc->dev->devno; + u16 tmp16; + + pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16); + tmp16 &= ~(1 << dn); + pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16); + ata_bmdma_stop(qc); +} + +static struct scsi_host_template atiixp_sht = { + ATA_BMDMA_SHT(DRV_NAME), + .sg_tablesize = LIBATA_DUMB_MAX_PRD, +}; + +static struct ata_port_operations atiixp_port_ops = { + .inherits = &ata_bmdma_port_ops, + + .qc_prep = ata_bmdma_dumb_qc_prep, + .bmdma_start = atiixp_bmdma_start, + .bmdma_stop = atiixp_bmdma_stop, + + .prereset = atiixp_prereset, + .cable_detect = atiixp_cable_detect, + .set_piomode = atiixp_set_piomode, + .set_dmamode = atiixp_set_dmamode, +}; + +static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, + .udma_mask = ATA_UDMA5, + .port_ops = &atiixp_port_ops + }; + const struct ata_port_info *ppi[] = { &info, &info }; + + /* SB600 doesn't have secondary port wired */ + if (pdev->device == PCI_DEVICE_ID_ATI_IXP600_IDE) + ppi[1] = &ata_dummy_port_info; + + return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL, + ATA_HOST_PARALLEL_SCAN); +} + +static const struct pci_device_id atiixp[] = { + { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), }, + { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), }, + { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), }, + { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), }, + { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), }, + + { }, +}; + +static struct pci_driver atiixp_pci_driver = { + .name = DRV_NAME, + .id_table = atiixp, + .probe = atiixp_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .resume = ata_pci_device_resume, + .suspend = ata_pci_device_suspend, +#endif +}; + +module_pci_driver(atiixp_pci_driver); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for ATI IXP200/300/400"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, atiixp); +MODULE_VERSION(DRV_VERSION); |