summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_serverworks.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/ata/pata_serverworks.c493
1 files changed, 493 insertions, 0 deletions
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
new file mode 100644
index 000000000..7511e11ee
--- /dev/null
+++ b/drivers/ata/pata_serverworks.c
@@ -0,0 +1,493 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * pata_serverworks.c - Serverworks PATA for new ATA layer
+ * (C) 2005 Red Hat Inc
+ * (C) 2010 Bartlomiej Zolnierkiewicz
+ *
+ * based upon
+ *
+ * serverworks.c
+ *
+ * Copyright (C) 1998-2000 Michel Aubry
+ * Copyright (C) 1998-2000 Andrzej Krzysztofowicz
+ * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
+ * Portions copyright (c) 2001 Sun Microsystems
+ *
+ *
+ * RCC/ServerWorks IDE driver for Linux
+ *
+ * OSB4: `Open South Bridge' IDE Interface (fn 1)
+ * supports UDMA mode 2 (33 MB/s)
+ *
+ * CSB5: `Champion South Bridge' IDE Interface (fn 1)
+ * all revisions support UDMA mode 4 (66 MB/s)
+ * revision A2.0 and up support UDMA mode 5 (100 MB/s)
+ *
+ * *** The CSB5 does not provide ANY register ***
+ * *** to detect 80-conductor cable presence. ***
+ *
+ * CSB6: `Champion South Bridge' IDE Interface (optional: third channel)
+ *
+ * Documentation:
+ * Available under NDA only. Errata info very hard to get.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_serverworks"
+#define DRV_VERSION "0.4.3"
+
+#define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
+#define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
+
+/* Seagate Barracuda ATA IV Family drives in UDMA mode 5
+ * can overrun their FIFOs when used with the CSB5 */
+
+static const char *csb_bad_ata100[] = {
+ "ST320011A",
+ "ST340016A",
+ "ST360021A",
+ "ST380021A",
+ NULL
+};
+
+/**
+ * oem_cable - Dell/Sun serverworks cable detection
+ * @ap: ATA port to do cable detect
+ *
+ * Dell PowerEdge and Sun Cobalt 'Alpine' hide the 40/80 pin select
+ * for their interfaces in the top two bits of the subsystem ID.
+ */
+
+static int oem_cable(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ if (pdev->subsystem_device & (1 << (ap->port_no + 14)))
+ return ATA_CBL_PATA80;
+ return ATA_CBL_PATA40;
+}
+
+struct sv_cable_table {
+ int device;
+ int subvendor;
+ int (*cable_detect)(struct ata_port *ap);
+};
+
+static struct sv_cable_table cable_detect[] = {
+ { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, oem_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, oem_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN, oem_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, ata_cable_40wire },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, ata_cable_unknown },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, ata_cable_unknown },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, ata_cable_unknown },
+ { PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, ata_cable_unknown },
+ { }
+};
+
+/**
+ * serverworks_cable_detect - cable detection
+ * @ap: ATA port
+ *
+ * Perform cable detection according to the device and subvendor
+ * identifications
+ */
+
+static int serverworks_cable_detect(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct sv_cable_table *cb = cable_detect;
+
+ while(cb->device) {
+ if (cb->device == pdev->device &&
+ (cb->subvendor == pdev->subsystem_vendor ||
+ cb->subvendor == PCI_ANY_ID)) {
+ return cb->cable_detect(ap);
+ }
+ cb++;
+ }
+
+ BUG();
+ return -1; /* kill compiler warning */
+}
+
+/**
+ * serverworks_is_csb - Check for CSB or OSB
+ * @pdev: PCI device to check
+ *
+ * Returns true if the device being checked is known to be a CSB
+ * series device.
+ */
+
+static u8 serverworks_is_csb(struct pci_dev *pdev)
+{
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
+ case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
+ case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
+ case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
+ return 1;
+ default:
+ break;
+ }
+ return 0;
+}
+
+/**
+ * serverworks_osb4_filter - mode selection filter
+ * @adev: ATA device
+ * @mask: Mask of proposed modes
+ *
+ * Filter the offered modes for the device to apply controller
+ * specific rules. OSB4 requires no UDMA for disks due to a FIFO
+ * bug we hit.
+ */
+
+static unsigned long serverworks_osb4_filter(struct ata_device *adev, unsigned long mask)
+{
+ if (adev->class == ATA_DEV_ATA)
+ mask &= ~ATA_MASK_UDMA;
+ return mask;
+}
+
+
+/**
+ * serverworks_csb_filter - mode selection filter
+ * @adev: ATA device
+ * @mask: Mask of proposed modes
+ *
+ * Check the blacklist and disable UDMA5 if matched
+ */
+
+static unsigned long serverworks_csb_filter(struct ata_device *adev, unsigned long mask)
+{
+ const char *p;
+ char model_num[ATA_ID_PROD_LEN + 1];
+ int i;
+
+ /* Disk, UDMA */
+ if (adev->class != ATA_DEV_ATA)
+ return mask;
+
+ /* Actually do need to check */
+ ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
+
+ for (i = 0; (p = csb_bad_ata100[i]) != NULL; i++) {
+ if (!strcmp(p, model_num))
+ mask &= ~(0xE0 << ATA_SHIFT_UDMA);
+ }
+ return mask;
+}
+
+/**
+ * serverworks_set_piomode - set initial PIO mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Program the OSB4/CSB5 timing registers for PIO. The PIO register
+ * load is done as a simple lookup.
+ */
+static void serverworks_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ static const u8 pio_mode[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
+ int offset = 1 + 2 * ap->port_no - adev->devno;
+ int devbits = (2 * ap->port_no + adev->devno) * 4;
+ u16 csb5_pio;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int pio = adev->pio_mode - XFER_PIO_0;
+
+ pci_write_config_byte(pdev, 0x40 + offset, pio_mode[pio]);
+
+ /* The OSB4 just requires the timing but the CSB series want the
+ mode number as well */
+ if (serverworks_is_csb(pdev)) {
+ pci_read_config_word(pdev, 0x4A, &csb5_pio);
+ csb5_pio &= ~(0x0F << devbits);
+ pci_write_config_word(pdev, 0x4A, csb5_pio | (pio << devbits));
+ }
+}
+
+/**
+ * serverworks_set_dmamode - set initial DMA mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Program the MWDMA/UDMA modes for the serverworks OSB4/CSB5
+ * chipset. The MWDMA mode values are pulled from a lookup table
+ * while the chipset uses mode number for UDMA.
+ */
+
+static void serverworks_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ static const u8 dma_mode[] = { 0x77, 0x21, 0x20 };
+ int offset = 1 + 2 * ap->port_no - adev->devno;
+ int devbits = 2 * ap->port_no + adev->devno;
+ u8 ultra;
+ u8 ultra_cfg;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ pci_read_config_byte(pdev, 0x54, &ultra_cfg);
+ pci_read_config_byte(pdev, 0x56 + ap->port_no, &ultra);
+ ultra &= ~(0x0F << (adev->devno * 4));
+
+ if (adev->dma_mode >= XFER_UDMA_0) {
+ pci_write_config_byte(pdev, 0x44 + offset, 0x20);
+
+ ultra |= (adev->dma_mode - XFER_UDMA_0)
+ << (adev->devno * 4);
+ ultra_cfg |= (1 << devbits);
+ } else {
+ pci_write_config_byte(pdev, 0x44 + offset,
+ dma_mode[adev->dma_mode - XFER_MW_DMA_0]);
+ ultra_cfg &= ~(1 << devbits);
+ }
+ pci_write_config_byte(pdev, 0x56 + ap->port_no, ultra);
+ pci_write_config_byte(pdev, 0x54, ultra_cfg);
+}
+
+static struct scsi_host_template serverworks_osb4_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+ .sg_tablesize = LIBATA_DUMB_MAX_PRD,
+};
+
+static struct scsi_host_template serverworks_csb_sht = {
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations serverworks_osb4_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .qc_prep = ata_bmdma_dumb_qc_prep,
+ .cable_detect = serverworks_cable_detect,
+ .mode_filter = serverworks_osb4_filter,
+ .set_piomode = serverworks_set_piomode,
+ .set_dmamode = serverworks_set_dmamode,
+};
+
+static struct ata_port_operations serverworks_csb_port_ops = {
+ .inherits = &serverworks_osb4_port_ops,
+ .qc_prep = ata_bmdma_qc_prep,
+ .mode_filter = serverworks_csb_filter,
+};
+
+static int serverworks_fixup_osb4(struct pci_dev *pdev)
+{
+ u32 reg;
+ struct pci_dev *isa_dev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
+ PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL);
+ if (isa_dev) {
+ pci_read_config_dword(isa_dev, 0x64, &reg);
+ reg &= ~0x00002000; /* disable 600ns interrupt mask */
+ if (!(reg & 0x00004000))
+ printk(KERN_DEBUG DRV_NAME ": UDMA not BIOS enabled.\n");
+ reg |= 0x00004000; /* enable UDMA/33 support */
+ pci_write_config_dword(isa_dev, 0x64, reg);
+ pci_dev_put(isa_dev);
+ return 0;
+ }
+ printk(KERN_WARNING DRV_NAME ": Unable to find bridge.\n");
+ return -ENODEV;
+}
+
+static int serverworks_fixup_csb(struct pci_dev *pdev)
+{
+ u8 btr;
+
+ /* Third Channel Test */
+ if (!(PCI_FUNC(pdev->devfn) & 1)) {
+ struct pci_dev * findev = NULL;
+ u32 reg4c = 0;
+ findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
+ PCI_DEVICE_ID_SERVERWORKS_CSB5, NULL);
+ if (findev) {
+ pci_read_config_dword(findev, 0x4C, &reg4c);
+ reg4c &= ~0x000007FF;
+ reg4c |= 0x00000040;
+ reg4c |= 0x00000020;
+ pci_write_config_dword(findev, 0x4C, reg4c);
+ pci_dev_put(findev);
+ }
+ } else {
+ struct pci_dev * findev = NULL;
+ u8 reg41 = 0;
+
+ findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
+ PCI_DEVICE_ID_SERVERWORKS_CSB6, NULL);
+ if (findev) {
+ pci_read_config_byte(findev, 0x41, &reg41);
+ reg41 &= ~0x40;
+ pci_write_config_byte(findev, 0x41, reg41);
+ pci_dev_put(findev);
+ }
+ }
+ /* setup the UDMA Control register
+ *
+ * 1. clear bit 6 to enable DMA
+ * 2. enable DMA modes with bits 0-1
+ * 00 : legacy
+ * 01 : udma2
+ * 10 : udma2/udma4
+ * 11 : udma2/udma4/udma5
+ */
+ pci_read_config_byte(pdev, 0x5A, &btr);
+ btr &= ~0x40;
+ if (!(PCI_FUNC(pdev->devfn) & 1))
+ btr |= 0x2;
+ else
+ btr |= (pdev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
+ pci_write_config_byte(pdev, 0x5A, btr);
+
+ return btr;
+}
+
+static void serverworks_fixup_ht1000(struct pci_dev *pdev)
+{
+ u8 btr;
+ /* Setup HT1000 SouthBridge Controller - Single Channel Only */
+ pci_read_config_byte(pdev, 0x5A, &btr);
+ btr &= ~0x40;
+ btr |= 0x3;
+ pci_write_config_byte(pdev, 0x5A, btr);
+}
+
+static int serverworks_fixup(struct pci_dev *pdev)
+{
+ int rc = 0;
+
+ /* Force master latency timer to 64 PCI clocks */
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
+
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE:
+ rc = serverworks_fixup_osb4(pdev);
+ break;
+ case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
+ ata_pci_bmdma_clear_simplex(pdev);
+ fallthrough;
+ case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
+ case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
+ rc = serverworks_fixup_csb(pdev);
+ break;
+ case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
+ serverworks_fixup_ht1000(pdev);
+ break;
+ }
+
+ return rc;
+}
+
+static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ static const struct ata_port_info info[4] = {
+ { /* OSB4 */
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA2,
+ .port_ops = &serverworks_osb4_port_ops
+ }, { /* OSB4 no UDMA */
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ /* No UDMA */
+ .port_ops = &serverworks_osb4_port_ops
+ }, { /* CSB5 */
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA4,
+ .port_ops = &serverworks_csb_port_ops
+ }, { /* CSB5 - later revisions*/
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA5,
+ .port_ops = &serverworks_csb_port_ops
+ }
+ };
+ const struct ata_port_info *ppi[] = { &info[id->driver_data], NULL };
+ struct scsi_host_template *sht = &serverworks_csb_sht;
+ int rc;
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ rc = serverworks_fixup(pdev);
+
+ /* OSB4 : South Bridge and IDE */
+ if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
+ /* Select non UDMA capable OSB4 if we can't do fixups */
+ if (rc < 0)
+ ppi[0] = &info[1];
+ sht = &serverworks_osb4_sht;
+ }
+ /* setup CSB5/CSB6 : South Bridge and IDE option RAID */
+ else if ((pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) ||
+ (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
+ (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) {
+
+ /* If the returned btr is the newer revision then
+ select the right info block */
+ if (rc == 3)
+ ppi[0] = &info[3];
+
+ /* Is this the 3rd channel CSB6 IDE ? */
+ if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)
+ ppi[1] = &ata_dummy_port_info;
+ }
+
+ return ata_pci_bmdma_init_one(pdev, ppi, sht, NULL, 0);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int serverworks_reinit_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = pci_get_drvdata(pdev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ (void)serverworks_fixup(pdev);
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
+static const struct pci_device_id serverworks[] = {
+ { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE), 0},
+ { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE), 2},
+ { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE), 2},
+ { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2), 2},
+ { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE), 2},
+
+ { },
+};
+
+static struct pci_driver serverworks_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = serverworks,
+ .probe = serverworks_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM_SLEEP
+ .suspend = ata_pci_device_suspend,
+ .resume = serverworks_reinit_one,
+#endif
+};
+
+module_pci_driver(serverworks_pci_driver);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for Serverworks OSB4/CSB5/CSB6");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, serverworks);
+MODULE_VERSION(DRV_VERSION);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 11:00:52 +0000