diff options
Diffstat (limited to '')
-rw-r--r-- | drivers/clk/baikal-t1/clk-ccu-div.c | 503 |
1 files changed, 503 insertions, 0 deletions
diff --git a/drivers/clk/baikal-t1/clk-ccu-div.c b/drivers/clk/baikal-t1/clk-ccu-div.c new file mode 100644 index 000000000..90f4fda40 --- /dev/null +++ b/drivers/clk/baikal-t1/clk-ccu-div.c @@ -0,0 +1,503 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2020 BAIKAL ELECTRONICS, JSC + * + * Authors: + * Serge Semin <Sergey.Semin@baikalelectronics.ru> + * Dmitry Dunaev <dmitry.dunaev@baikalelectronics.ru> + * + * Baikal-T1 CCU Dividers clock driver + */ + +#define pr_fmt(fmt) "bt1-ccu-div: " fmt + +#include <linux/kernel.h> +#include <linux/printk.h> +#include <linux/slab.h> +#include <linux/clk-provider.h> +#include <linux/reset-controller.h> +#include <linux/mfd/syscon.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/ioport.h> +#include <linux/regmap.h> + +#include <dt-bindings/clock/bt1-ccu.h> +#include <dt-bindings/reset/bt1-ccu.h> + +#include "ccu-div.h" + +#define CCU_AXI_MAIN_BASE 0x030 +#define CCU_AXI_DDR_BASE 0x034 +#define CCU_AXI_SATA_BASE 0x038 +#define CCU_AXI_GMAC0_BASE 0x03C +#define CCU_AXI_GMAC1_BASE 0x040 +#define CCU_AXI_XGMAC_BASE 0x044 +#define CCU_AXI_PCIE_M_BASE 0x048 +#define CCU_AXI_PCIE_S_BASE 0x04C +#define CCU_AXI_USB_BASE 0x050 +#define CCU_AXI_HWA_BASE 0x054 +#define CCU_AXI_SRAM_BASE 0x058 + +#define CCU_SYS_SATA_REF_BASE 0x060 +#define CCU_SYS_APB_BASE 0x064 +#define CCU_SYS_GMAC0_BASE 0x068 +#define CCU_SYS_GMAC1_BASE 0x06C +#define CCU_SYS_XGMAC_BASE 0x070 +#define CCU_SYS_USB_BASE 0x074 +#define CCU_SYS_PVT_BASE 0x078 +#define CCU_SYS_HWA_BASE 0x07C +#define CCU_SYS_UART_BASE 0x084 +#define CCU_SYS_TIMER0_BASE 0x088 +#define CCU_SYS_TIMER1_BASE 0x08C +#define CCU_SYS_TIMER2_BASE 0x090 +#define CCU_SYS_WDT_BASE 0x150 + +#define CCU_DIV_VAR_INFO(_id, _name, _pname, _base, _width, _flags, _features) \ + { \ + .id = _id, \ + .name = _name, \ + .parent_name = _pname, \ + .base = _base, \ + .type = CCU_DIV_VAR, \ + .width = _width, \ + .flags = _flags, \ + .features = _features \ + } + +#define CCU_DIV_GATE_INFO(_id, _name, _pname, _base, _divider) \ + { \ + .id = _id, \ + .name = _name, \ + .parent_name = _pname, \ + .base = _base, \ + .type = CCU_DIV_GATE, \ + .divider = _divider \ + } + +#define CCU_DIV_BUF_INFO(_id, _name, _pname, _base, _flags) \ + { \ + .id = _id, \ + .name = _name, \ + .parent_name = _pname, \ + .base = _base, \ + .type = CCU_DIV_BUF, \ + .flags = _flags \ + } + +#define CCU_DIV_FIXED_INFO(_id, _name, _pname, _divider) \ + { \ + .id = _id, \ + .name = _name, \ + .parent_name = _pname, \ + .type = CCU_DIV_FIXED, \ + .divider = _divider \ + } + +#define CCU_DIV_RST_MAP(_rst_id, _clk_id) \ + { \ + .rst_id = _rst_id, \ + .clk_id = _clk_id \ + } + +struct ccu_div_info { + unsigned int id; + const char *name; + const char *parent_name; + unsigned int base; + enum ccu_div_type type; + union { + unsigned int width; + unsigned int divider; + }; + unsigned long flags; + unsigned long features; +}; + +struct ccu_div_rst_map { + unsigned int rst_id; + unsigned int clk_id; +}; + +struct ccu_div_data { + struct device_node *np; + struct regmap *sys_regs; + + unsigned int divs_num; + const struct ccu_div_info *divs_info; + struct ccu_div **divs; + + unsigned int rst_num; + const struct ccu_div_rst_map *rst_map; + struct reset_controller_dev rcdev; +}; +#define to_ccu_div_data(_rcdev) container_of(_rcdev, struct ccu_div_data, rcdev) + +/* + * AXI Main Interconnect (axi_main_clk) and DDR AXI-bus (axi_ddr_clk) clocks + * must be left enabled in any case, since former one is responsible for + * clocking a bus between CPU cores and the rest of the SoC components, while + * the later is clocking the AXI-bus between DDR controller and the Main + * Interconnect. So should any of these clocks get to be disabled, the system + * will literally stop working. That's why we marked them as critical. + */ +static const struct ccu_div_info axi_info[] = { + CCU_DIV_VAR_INFO(CCU_AXI_MAIN_CLK, "axi_main_clk", "pcie_clk", + CCU_AXI_MAIN_BASE, 4, + CLK_IS_CRITICAL, CCU_DIV_RESET_DOMAIN), + CCU_DIV_VAR_INFO(CCU_AXI_DDR_CLK, "axi_ddr_clk", "sata_clk", + CCU_AXI_DDR_BASE, 4, + CLK_IS_CRITICAL | CLK_SET_RATE_GATE, + CCU_DIV_RESET_DOMAIN), + CCU_DIV_VAR_INFO(CCU_AXI_SATA_CLK, "axi_sata_clk", "sata_clk", + CCU_AXI_SATA_BASE, 4, + CLK_SET_RATE_GATE, CCU_DIV_RESET_DOMAIN), + CCU_DIV_VAR_INFO(CCU_AXI_GMAC0_CLK, "axi_gmac0_clk", "eth_clk", + CCU_AXI_GMAC0_BASE, 4, + CLK_SET_RATE_GATE, CCU_DIV_RESET_DOMAIN), + CCU_DIV_VAR_INFO(CCU_AXI_GMAC1_CLK, "axi_gmac1_clk", "eth_clk", + CCU_AXI_GMAC1_BASE, 4, + CLK_SET_RATE_GATE, CCU_DIV_RESET_DOMAIN), + CCU_DIV_VAR_INFO(CCU_AXI_XGMAC_CLK, "axi_xgmac_clk", "eth_clk", + CCU_AXI_XGMAC_BASE, 4, + CLK_SET_RATE_GATE, CCU_DIV_RESET_DOMAIN), + CCU_DIV_VAR_INFO(CCU_AXI_PCIE_M_CLK, "axi_pcie_m_clk", "pcie_clk", + CCU_AXI_PCIE_M_BASE, 4, + CLK_SET_RATE_GATE, CCU_DIV_RESET_DOMAIN), + CCU_DIV_VAR_INFO(CCU_AXI_PCIE_S_CLK, "axi_pcie_s_clk", "pcie_clk", + CCU_AXI_PCIE_S_BASE, 4, + CLK_SET_RATE_GATE, CCU_DIV_RESET_DOMAIN), + CCU_DIV_VAR_INFO(CCU_AXI_USB_CLK, "axi_usb_clk", "sata_clk", + CCU_AXI_USB_BASE, 4, + CLK_SET_RATE_GATE, CCU_DIV_RESET_DOMAIN), + CCU_DIV_VAR_INFO(CCU_AXI_HWA_CLK, "axi_hwa_clk", "sata_clk", + CCU_AXI_HWA_BASE, 4, + CLK_SET_RATE_GATE, CCU_DIV_RESET_DOMAIN), + CCU_DIV_VAR_INFO(CCU_AXI_SRAM_CLK, "axi_sram_clk", "eth_clk", + CCU_AXI_SRAM_BASE, 4, + CLK_SET_RATE_GATE, CCU_DIV_RESET_DOMAIN) +}; + +static const struct ccu_div_rst_map axi_rst_map[] = { + CCU_DIV_RST_MAP(CCU_AXI_MAIN_RST, CCU_AXI_MAIN_CLK), + CCU_DIV_RST_MAP(CCU_AXI_DDR_RST, CCU_AXI_DDR_CLK), + CCU_DIV_RST_MAP(CCU_AXI_SATA_RST, CCU_AXI_SATA_CLK), + CCU_DIV_RST_MAP(CCU_AXI_GMAC0_RST, CCU_AXI_GMAC0_CLK), + CCU_DIV_RST_MAP(CCU_AXI_GMAC1_RST, CCU_AXI_GMAC1_CLK), + CCU_DIV_RST_MAP(CCU_AXI_XGMAC_RST, CCU_AXI_XGMAC_CLK), + CCU_DIV_RST_MAP(CCU_AXI_PCIE_M_RST, CCU_AXI_PCIE_M_CLK), + CCU_DIV_RST_MAP(CCU_AXI_PCIE_S_RST, CCU_AXI_PCIE_S_CLK), + CCU_DIV_RST_MAP(CCU_AXI_USB_RST, CCU_AXI_USB_CLK), + CCU_DIV_RST_MAP(CCU_AXI_HWA_RST, CCU_AXI_HWA_CLK), + CCU_DIV_RST_MAP(CCU_AXI_SRAM_RST, CCU_AXI_SRAM_CLK) +}; + +/* + * APB-bus clock is marked as critical since it's a main communication bus + * for the SoC devices registers IO-operations. + */ +static const struct ccu_div_info sys_info[] = { + CCU_DIV_VAR_INFO(CCU_SYS_SATA_CLK, "sys_sata_clk", + "sata_clk", CCU_SYS_SATA_REF_BASE, 4, + CLK_SET_RATE_GATE, + CCU_DIV_SKIP_ONE | CCU_DIV_LOCK_SHIFTED | + CCU_DIV_RESET_DOMAIN), + CCU_DIV_BUF_INFO(CCU_SYS_SATA_REF_CLK, "sys_sata_ref_clk", + "sys_sata_clk", CCU_SYS_SATA_REF_BASE, + CLK_SET_RATE_PARENT), + CCU_DIV_VAR_INFO(CCU_SYS_APB_CLK, "sys_apb_clk", + "pcie_clk", CCU_SYS_APB_BASE, 5, + CLK_IS_CRITICAL, CCU_DIV_RESET_DOMAIN), + CCU_DIV_GATE_INFO(CCU_SYS_GMAC0_TX_CLK, "sys_gmac0_tx_clk", + "eth_clk", CCU_SYS_GMAC0_BASE, 5), + CCU_DIV_FIXED_INFO(CCU_SYS_GMAC0_PTP_CLK, "sys_gmac0_ptp_clk", + "eth_clk", 10), + CCU_DIV_GATE_INFO(CCU_SYS_GMAC1_TX_CLK, "sys_gmac1_tx_clk", + "eth_clk", CCU_SYS_GMAC1_BASE, 5), + CCU_DIV_FIXED_INFO(CCU_SYS_GMAC1_PTP_CLK, "sys_gmac1_ptp_clk", + "eth_clk", 10), + CCU_DIV_GATE_INFO(CCU_SYS_XGMAC_CLK, "sys_xgmac_clk", + "eth_clk", CCU_SYS_XGMAC_BASE, 1), + CCU_DIV_FIXED_INFO(CCU_SYS_XGMAC_REF_CLK, "sys_xgmac_ref_clk", + "sys_xgmac_clk", 8), + CCU_DIV_FIXED_INFO(CCU_SYS_XGMAC_PTP_CLK, "sys_xgmac_ptp_clk", + "sys_xgmac_clk", 8), + CCU_DIV_GATE_INFO(CCU_SYS_USB_CLK, "sys_usb_clk", + "eth_clk", CCU_SYS_USB_BASE, 10), + CCU_DIV_VAR_INFO(CCU_SYS_PVT_CLK, "sys_pvt_clk", + "ref_clk", CCU_SYS_PVT_BASE, 5, + CLK_SET_RATE_GATE, 0), + CCU_DIV_VAR_INFO(CCU_SYS_HWA_CLK, "sys_hwa_clk", + "sata_clk", CCU_SYS_HWA_BASE, 4, + CLK_SET_RATE_GATE, 0), + CCU_DIV_VAR_INFO(CCU_SYS_UART_CLK, "sys_uart_clk", + "eth_clk", CCU_SYS_UART_BASE, 17, + CLK_SET_RATE_GATE, 0), + CCU_DIV_FIXED_INFO(CCU_SYS_I2C1_CLK, "sys_i2c1_clk", + "eth_clk", 10), + CCU_DIV_FIXED_INFO(CCU_SYS_I2C2_CLK, "sys_i2c2_clk", + "eth_clk", 10), + CCU_DIV_FIXED_INFO(CCU_SYS_GPIO_CLK, "sys_gpio_clk", + "ref_clk", 25), + CCU_DIV_VAR_INFO(CCU_SYS_TIMER0_CLK, "sys_timer0_clk", + "ref_clk", CCU_SYS_TIMER0_BASE, 17, + CLK_SET_RATE_GATE, 0), + CCU_DIV_VAR_INFO(CCU_SYS_TIMER1_CLK, "sys_timer1_clk", + "ref_clk", CCU_SYS_TIMER1_BASE, 17, + CLK_SET_RATE_GATE, 0), + CCU_DIV_VAR_INFO(CCU_SYS_TIMER2_CLK, "sys_timer2_clk", + "ref_clk", CCU_SYS_TIMER2_BASE, 17, + CLK_SET_RATE_GATE, 0), + CCU_DIV_VAR_INFO(CCU_SYS_WDT_CLK, "sys_wdt_clk", + "eth_clk", CCU_SYS_WDT_BASE, 17, + CLK_SET_RATE_GATE, CCU_DIV_SKIP_ONE_TO_THREE) +}; + +static const struct ccu_div_rst_map sys_rst_map[] = { + CCU_DIV_RST_MAP(CCU_SYS_SATA_REF_RST, CCU_SYS_SATA_REF_CLK), + CCU_DIV_RST_MAP(CCU_SYS_APB_RST, CCU_SYS_APB_CLK), +}; + +static struct ccu_div *ccu_div_find_desc(struct ccu_div_data *data, + unsigned int clk_id) +{ + struct ccu_div *div; + int idx; + + for (idx = 0; idx < data->divs_num; ++idx) { + div = data->divs[idx]; + if (div && div->id == clk_id) + return div; + } + + return ERR_PTR(-EINVAL); +} + +static int ccu_div_reset(struct reset_controller_dev *rcdev, + unsigned long rst_id) +{ + struct ccu_div_data *data = to_ccu_div_data(rcdev); + const struct ccu_div_rst_map *map; + struct ccu_div *div; + int idx, ret; + + for (idx = 0, map = data->rst_map; idx < data->rst_num; ++idx, ++map) { + if (map->rst_id == rst_id) + break; + } + if (idx == data->rst_num) { + pr_err("Invalid reset ID %lu specified\n", rst_id); + return -EINVAL; + } + + div = ccu_div_find_desc(data, map->clk_id); + if (IS_ERR(div)) { + pr_err("Invalid clock ID %d in mapping\n", map->clk_id); + return PTR_ERR(div); + } + + ret = ccu_div_reset_domain(div); + if (ret) { + pr_err("Reset isn't supported by divider %s\n", + clk_hw_get_name(ccu_div_get_clk_hw(div))); + } + + return ret; +} + +static const struct reset_control_ops ccu_div_rst_ops = { + .reset = ccu_div_reset, +}; + +static struct ccu_div_data *ccu_div_create_data(struct device_node *np) +{ + struct ccu_div_data *data; + int ret; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return ERR_PTR(-ENOMEM); + + data->np = np; + if (of_device_is_compatible(np, "baikal,bt1-ccu-axi")) { + data->divs_num = ARRAY_SIZE(axi_info); + data->divs_info = axi_info; + data->rst_num = ARRAY_SIZE(axi_rst_map); + data->rst_map = axi_rst_map; + } else if (of_device_is_compatible(np, "baikal,bt1-ccu-sys")) { + data->divs_num = ARRAY_SIZE(sys_info); + data->divs_info = sys_info; + data->rst_num = ARRAY_SIZE(sys_rst_map); + data->rst_map = sys_rst_map; + } else { + pr_err("Incompatible DT node '%s' specified\n", + of_node_full_name(np)); + ret = -EINVAL; + goto err_kfree_data; + } + + data->divs = kcalloc(data->divs_num, sizeof(*data->divs), GFP_KERNEL); + if (!data->divs) { + ret = -ENOMEM; + goto err_kfree_data; + } + + return data; + +err_kfree_data: + kfree(data); + + return ERR_PTR(ret); +} + +static void ccu_div_free_data(struct ccu_div_data *data) +{ + kfree(data->divs); + + kfree(data); +} + +static int ccu_div_find_sys_regs(struct ccu_div_data *data) +{ + data->sys_regs = syscon_node_to_regmap(data->np->parent); + if (IS_ERR(data->sys_regs)) { + pr_err("Failed to find syscon regs for '%s'\n", + of_node_full_name(data->np)); + return PTR_ERR(data->sys_regs); + } + + return 0; +} + +static struct clk_hw *ccu_div_of_clk_hw_get(struct of_phandle_args *clkspec, + void *priv) +{ + struct ccu_div_data *data = priv; + struct ccu_div *div; + unsigned int clk_id; + + clk_id = clkspec->args[0]; + div = ccu_div_find_desc(data, clk_id); + if (IS_ERR(div)) { + pr_info("Invalid clock ID %d specified\n", clk_id); + return ERR_CAST(div); + } + + return ccu_div_get_clk_hw(div); +} + +static int ccu_div_clk_register(struct ccu_div_data *data) +{ + int idx, ret; + + for (idx = 0; idx < data->divs_num; ++idx) { + const struct ccu_div_info *info = &data->divs_info[idx]; + struct ccu_div_init_data init = {0}; + + init.id = info->id; + init.name = info->name; + init.parent_name = info->parent_name; + init.np = data->np; + init.type = info->type; + init.flags = info->flags; + init.features = info->features; + + if (init.type == CCU_DIV_VAR) { + init.base = info->base; + init.sys_regs = data->sys_regs; + init.width = info->width; + } else if (init.type == CCU_DIV_GATE) { + init.base = info->base; + init.sys_regs = data->sys_regs; + init.divider = info->divider; + } else if (init.type == CCU_DIV_BUF) { + init.base = info->base; + init.sys_regs = data->sys_regs; + } else { + init.divider = info->divider; + } + + data->divs[idx] = ccu_div_hw_register(&init); + if (IS_ERR(data->divs[idx])) { + ret = PTR_ERR(data->divs[idx]); + pr_err("Couldn't register divider '%s' hw\n", + init.name); + goto err_hw_unregister; + } + } + + ret = of_clk_add_hw_provider(data->np, ccu_div_of_clk_hw_get, data); + if (ret) { + pr_err("Couldn't register dividers '%s' clock provider\n", + of_node_full_name(data->np)); + goto err_hw_unregister; + } + + return 0; + +err_hw_unregister: + for (--idx; idx >= 0; --idx) + ccu_div_hw_unregister(data->divs[idx]); + + return ret; +} + +static void ccu_div_clk_unregister(struct ccu_div_data *data) +{ + int idx; + + of_clk_del_provider(data->np); + + for (idx = 0; idx < data->divs_num; ++idx) + ccu_div_hw_unregister(data->divs[idx]); +} + +static int ccu_div_rst_register(struct ccu_div_data *data) +{ + int ret; + + data->rcdev.ops = &ccu_div_rst_ops; + data->rcdev.of_node = data->np; + data->rcdev.nr_resets = data->rst_num; + + ret = reset_controller_register(&data->rcdev); + if (ret) + pr_err("Couldn't register divider '%s' reset controller\n", + of_node_full_name(data->np)); + + return ret; +} + +static void ccu_div_init(struct device_node *np) +{ + struct ccu_div_data *data; + int ret; + + data = ccu_div_create_data(np); + if (IS_ERR(data)) + return; + + ret = ccu_div_find_sys_regs(data); + if (ret) + goto err_free_data; + + ret = ccu_div_clk_register(data); + if (ret) + goto err_free_data; + + ret = ccu_div_rst_register(data); + if (ret) + goto err_clk_unregister; + + return; + +err_clk_unregister: + ccu_div_clk_unregister(data); + +err_free_data: + ccu_div_free_data(data); +} + +CLK_OF_DECLARE(ccu_axi, "baikal,bt1-ccu-axi", ccu_div_init); +CLK_OF_DECLARE(ccu_sys, "baikal,bt1-ccu-sys", ccu_div_init); |