diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/clk/clk-si544.c | 530 |
1 files changed, 530 insertions, 0 deletions
diff --git a/drivers/clk/clk-si544.c b/drivers/clk/clk-si544.c new file mode 100644 index 000000000..d9ec90861 --- /dev/null +++ b/drivers/clk/clk-si544.c @@ -0,0 +1,530 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for Silicon Labs Si544 Programmable Oscillator + * Copyright (C) 2018 Topic Embedded Products + * Author: Mike Looijmans <mike.looijmans@topic.nl> + */ + +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/math64.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +/* I2C registers (decimal as in datasheet) */ +#define SI544_REG_CONTROL 7 +#define SI544_REG_OE_STATE 17 +#define SI544_REG_HS_DIV 23 +#define SI544_REG_LS_HS_DIV 24 +#define SI544_REG_FBDIV0 26 +#define SI544_REG_FBDIV8 27 +#define SI544_REG_FBDIV16 28 +#define SI544_REG_FBDIV24 29 +#define SI544_REG_FBDIV32 30 +#define SI544_REG_FBDIV40 31 +#define SI544_REG_FCAL_OVR 69 +#define SI544_REG_ADPLL_DELTA_M0 231 +#define SI544_REG_ADPLL_DELTA_M8 232 +#define SI544_REG_ADPLL_DELTA_M16 233 +#define SI544_REG_PAGE_SELECT 255 + +/* Register values */ +#define SI544_CONTROL_RESET BIT(7) +#define SI544_CONTROL_MS_ICAL2 BIT(3) + +#define SI544_OE_STATE_ODC_OE BIT(0) + +/* Max freq depends on speed grade */ +#define SI544_MIN_FREQ 200000U + +/* Si544 Internal oscilator runs at 55.05 MHz */ +#define FXO 55050000U + +/* VCO range is 10.8 .. 12.1 GHz, max depends on speed grade */ +#define FVCO_MIN 10800000000ULL + +#define HS_DIV_MAX 2046 +#define HS_DIV_MAX_ODD 33 + +/* Lowest frequency synthesizeable using only the HS divider */ +#define MIN_HSDIV_FREQ (FVCO_MIN / HS_DIV_MAX) + +/* Range and interpretation of the adjustment value */ +#define DELTA_M_MAX 8161512 +#define DELTA_M_FRAC_NUM 19 +#define DELTA_M_FRAC_DEN 20000 + +enum si544_speed_grade { + si544a, + si544b, + si544c, +}; + +struct clk_si544 { + struct clk_hw hw; + struct regmap *regmap; + struct i2c_client *i2c_client; + enum si544_speed_grade speed_grade; +}; +#define to_clk_si544(_hw) container_of(_hw, struct clk_si544, hw) + +/** + * struct clk_si544_muldiv - Multiplier/divider settings + * @fb_div_frac: integer part of feedback divider (32 bits) + * @fb_div_int: fractional part of feedback divider (11 bits) + * @hs_div: 1st divider, 5..2046, must be even when >33 + * @ls_div_bits: 2nd divider, as 2^x, range 0..5 + * If ls_div_bits is non-zero, hs_div must be even + * @delta_m: Frequency shift for small -950..+950 ppm changes, 24 bit + */ +struct clk_si544_muldiv { + u32 fb_div_frac; + u16 fb_div_int; + u16 hs_div; + u8 ls_div_bits; + s32 delta_m; +}; + +/* Enables or disables the output driver */ +static int si544_enable_output(struct clk_si544 *data, bool enable) +{ + return regmap_update_bits(data->regmap, SI544_REG_OE_STATE, + SI544_OE_STATE_ODC_OE, enable ? SI544_OE_STATE_ODC_OE : 0); +} + +static int si544_prepare(struct clk_hw *hw) +{ + struct clk_si544 *data = to_clk_si544(hw); + + return si544_enable_output(data, true); +} + +static void si544_unprepare(struct clk_hw *hw) +{ + struct clk_si544 *data = to_clk_si544(hw); + + si544_enable_output(data, false); +} + +static int si544_is_prepared(struct clk_hw *hw) +{ + struct clk_si544 *data = to_clk_si544(hw); + unsigned int val; + int err; + + err = regmap_read(data->regmap, SI544_REG_OE_STATE, &val); + if (err < 0) + return err; + + return !!(val & SI544_OE_STATE_ODC_OE); +} + +/* Retrieve clock multiplier and dividers from hardware */ +static int si544_get_muldiv(struct clk_si544 *data, + struct clk_si544_muldiv *settings) +{ + int err; + u8 reg[6]; + + err = regmap_bulk_read(data->regmap, SI544_REG_HS_DIV, reg, 2); + if (err) + return err; + + settings->ls_div_bits = (reg[1] >> 4) & 0x07; + settings->hs_div = (reg[1] & 0x07) << 8 | reg[0]; + + err = regmap_bulk_read(data->regmap, SI544_REG_FBDIV0, reg, 6); + if (err) + return err; + + settings->fb_div_int = reg[4] | (reg[5] & 0x07) << 8; + settings->fb_div_frac = reg[0] | reg[1] << 8 | reg[2] << 16 | + reg[3] << 24; + + err = regmap_bulk_read(data->regmap, SI544_REG_ADPLL_DELTA_M0, reg, 3); + if (err) + return err; + + /* Interpret as 24-bit signed number */ + settings->delta_m = reg[0] << 8 | reg[1] << 16 | reg[2] << 24; + settings->delta_m >>= 8; + + return 0; +} + +static int si544_set_delta_m(struct clk_si544 *data, s32 delta_m) +{ + u8 reg[3]; + + reg[0] = delta_m; + reg[1] = delta_m >> 8; + reg[2] = delta_m >> 16; + + return regmap_bulk_write(data->regmap, SI544_REG_ADPLL_DELTA_M0, + reg, 3); +} + +static int si544_set_muldiv(struct clk_si544 *data, + struct clk_si544_muldiv *settings) +{ + int err; + u8 reg[6]; + + reg[0] = settings->hs_div; + reg[1] = settings->hs_div >> 8 | settings->ls_div_bits << 4; + + err = regmap_bulk_write(data->regmap, SI544_REG_HS_DIV, reg, 2); + if (err < 0) + return err; + + reg[0] = settings->fb_div_frac; + reg[1] = settings->fb_div_frac >> 8; + reg[2] = settings->fb_div_frac >> 16; + reg[3] = settings->fb_div_frac >> 24; + reg[4] = settings->fb_div_int; + reg[5] = settings->fb_div_int >> 8; + + /* + * Writing to SI544_REG_FBDIV40 triggers the clock change, so that + * must be written last + */ + return regmap_bulk_write(data->regmap, SI544_REG_FBDIV0, reg, 6); +} + +static bool is_valid_frequency(const struct clk_si544 *data, + unsigned long frequency) +{ + unsigned long max_freq = 0; + + if (frequency < SI544_MIN_FREQ) + return false; + + switch (data->speed_grade) { + case si544a: + max_freq = 1500000000; + break; + case si544b: + max_freq = 800000000; + break; + case si544c: + max_freq = 350000000; + break; + } + + return frequency <= max_freq; +} + +/* Calculate divider settings for a given frequency */ +static int si544_calc_muldiv(struct clk_si544_muldiv *settings, + unsigned long frequency) +{ + u64 vco; + u32 ls_freq; + u32 tmp; + u8 res; + + /* Determine the minimum value of LS_DIV and resulting target freq. */ + ls_freq = frequency; + settings->ls_div_bits = 0; + + if (frequency >= MIN_HSDIV_FREQ) { + settings->ls_div_bits = 0; + } else { + res = 1; + tmp = 2 * HS_DIV_MAX; + while (tmp <= (HS_DIV_MAX * 32)) { + if (((u64)frequency * tmp) >= FVCO_MIN) + break; + ++res; + tmp <<= 1; + } + settings->ls_div_bits = res; + ls_freq = frequency << res; + } + + /* Determine minimum HS_DIV by rounding up */ + vco = FVCO_MIN + ls_freq - 1; + do_div(vco, ls_freq); + settings->hs_div = vco; + + /* round up to even number when required */ + if ((settings->hs_div & 1) && + (settings->hs_div > HS_DIV_MAX_ODD || settings->ls_div_bits)) + ++settings->hs_div; + + /* Calculate VCO frequency (in 10..12GHz range) */ + vco = (u64)ls_freq * settings->hs_div; + + /* Calculate the integer part of the feedback divider */ + tmp = do_div(vco, FXO); + settings->fb_div_int = vco; + + /* And the fractional bits using the remainder */ + vco = (u64)tmp << 32; + vco += FXO / 2; /* Round to nearest multiple */ + do_div(vco, FXO); + settings->fb_div_frac = vco; + + /* Reset the frequency adjustment */ + settings->delta_m = 0; + + return 0; +} + +/* Calculate resulting frequency given the register settings */ +static unsigned long si544_calc_center_rate( + const struct clk_si544_muldiv *settings) +{ + u32 d = settings->hs_div * BIT(settings->ls_div_bits); + u64 vco; + + /* Calculate VCO from the fractional part */ + vco = (u64)settings->fb_div_frac * FXO; + vco += (FXO / 2); + vco >>= 32; + + /* Add the integer part of the VCO frequency */ + vco += (u64)settings->fb_div_int * FXO; + + /* Apply divider to obtain the generated frequency */ + do_div(vco, d); + + return vco; +} + +static unsigned long si544_calc_rate(const struct clk_si544_muldiv *settings) +{ + unsigned long rate = si544_calc_center_rate(settings); + s64 delta = (s64)rate * (DELTA_M_FRAC_NUM * settings->delta_m); + + /* + * The clock adjustment is much smaller than 1 Hz, round to the + * nearest multiple. Apparently div64_s64 rounds towards zero, hence + * check the sign and adjust into the proper direction. + */ + if (settings->delta_m < 0) + delta -= ((s64)DELTA_M_MAX * DELTA_M_FRAC_DEN) / 2; + else + delta += ((s64)DELTA_M_MAX * DELTA_M_FRAC_DEN) / 2; + delta = div64_s64(delta, ((s64)DELTA_M_MAX * DELTA_M_FRAC_DEN)); + + return rate + delta; +} + +static unsigned long si544_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_si544 *data = to_clk_si544(hw); + struct clk_si544_muldiv settings; + int err; + + err = si544_get_muldiv(data, &settings); + if (err) + return 0; + + return si544_calc_rate(&settings); +} + +static long si544_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct clk_si544 *data = to_clk_si544(hw); + + if (!is_valid_frequency(data, rate)) + return -EINVAL; + + /* The accuracy is less than 1 Hz, so any rate is possible */ + return rate; +} + +/* Calculates the maximum "small" change, 950 * rate / 1000000 */ +static unsigned long si544_max_delta(unsigned long rate) +{ + u64 num = rate; + + num *= DELTA_M_FRAC_NUM; + do_div(num, DELTA_M_FRAC_DEN); + + return num; +} + +static s32 si544_calc_delta(s32 delta, s32 max_delta) +{ + s64 n = (s64)delta * DELTA_M_MAX; + + return div_s64(n, max_delta); +} + +static int si544_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_si544 *data = to_clk_si544(hw); + struct clk_si544_muldiv settings; + unsigned long center; + long max_delta; + long delta; + unsigned int old_oe_state; + int err; + + if (!is_valid_frequency(data, rate)) + return -EINVAL; + + /* Try using the frequency adjustment feature for a <= 950ppm change */ + err = si544_get_muldiv(data, &settings); + if (err) + return err; + + center = si544_calc_center_rate(&settings); + max_delta = si544_max_delta(center); + delta = rate - center; + + if (abs(delta) <= max_delta) + return si544_set_delta_m(data, + si544_calc_delta(delta, max_delta)); + + /* Too big for the delta adjustment, need to reprogram */ + err = si544_calc_muldiv(&settings, rate); + if (err) + return err; + + err = regmap_read(data->regmap, SI544_REG_OE_STATE, &old_oe_state); + if (err) + return err; + + si544_enable_output(data, false); + + /* Allow FCAL for this frequency update */ + err = regmap_write(data->regmap, SI544_REG_FCAL_OVR, 0); + if (err < 0) + return err; + + err = si544_set_delta_m(data, settings.delta_m); + if (err < 0) + return err; + + err = si544_set_muldiv(data, &settings); + if (err < 0) + return err; /* Undefined state now, best to leave disabled */ + + /* Trigger calibration */ + err = regmap_write(data->regmap, SI544_REG_CONTROL, + SI544_CONTROL_MS_ICAL2); + if (err < 0) + return err; + + /* Applying a new frequency can take up to 10ms */ + usleep_range(10000, 12000); + + if (old_oe_state & SI544_OE_STATE_ODC_OE) + si544_enable_output(data, true); + + return err; +} + +static const struct clk_ops si544_clk_ops = { + .prepare = si544_prepare, + .unprepare = si544_unprepare, + .is_prepared = si544_is_prepared, + .recalc_rate = si544_recalc_rate, + .round_rate = si544_round_rate, + .set_rate = si544_set_rate, +}; + +static bool si544_regmap_is_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case SI544_REG_CONTROL: + case SI544_REG_FCAL_OVR: + return true; + default: + return false; + } +} + +static const struct regmap_config si544_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .max_register = SI544_REG_PAGE_SELECT, + .volatile_reg = si544_regmap_is_volatile, +}; + +static int si544_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct clk_si544 *data; + struct clk_init_data init; + int err; + + data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + init.ops = &si544_clk_ops; + init.flags = 0; + init.num_parents = 0; + data->hw.init = &init; + data->i2c_client = client; + data->speed_grade = id->driver_data; + + if (of_property_read_string(client->dev.of_node, "clock-output-names", + &init.name)) + init.name = client->dev.of_node->name; + + data->regmap = devm_regmap_init_i2c(client, &si544_regmap_config); + if (IS_ERR(data->regmap)) + return PTR_ERR(data->regmap); + + i2c_set_clientdata(client, data); + + /* Select page 0, just to be sure, there appear to be no more */ + err = regmap_write(data->regmap, SI544_REG_PAGE_SELECT, 0); + if (err < 0) + return err; + + err = devm_clk_hw_register(&client->dev, &data->hw); + if (err) { + dev_err(&client->dev, "clock registration failed\n"); + return err; + } + err = devm_of_clk_add_hw_provider(&client->dev, of_clk_hw_simple_get, + &data->hw); + if (err) { + dev_err(&client->dev, "unable to add clk provider\n"); + return err; + } + + return 0; +} + +static const struct i2c_device_id si544_id[] = { + { "si544a", si544a }, + { "si544b", si544b }, + { "si544c", si544c }, + { } +}; +MODULE_DEVICE_TABLE(i2c, si544_id); + +static const struct of_device_id clk_si544_of_match[] = { + { .compatible = "silabs,si544a" }, + { .compatible = "silabs,si544b" }, + { .compatible = "silabs,si544c" }, + { }, +}; +MODULE_DEVICE_TABLE(of, clk_si544_of_match); + +static struct i2c_driver si544_driver = { + .driver = { + .name = "si544", + .of_match_table = clk_si544_of_match, + }, + .probe = si544_probe, + .id_table = si544_id, +}; +module_i2c_driver(si544_driver); + +MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>"); +MODULE_DESCRIPTION("Si544 driver"); +MODULE_LICENSE("GPL"); |