diff options
Diffstat (limited to 'drivers/clk/meson/gxbb-aoclk.c')
-rw-r--r-- | drivers/clk/meson/gxbb-aoclk.c | 298 |
1 files changed, 298 insertions, 0 deletions
diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c new file mode 100644 index 000000000..e940861a3 --- /dev/null +++ b/drivers/clk/meson/gxbb-aoclk.c @@ -0,0 +1,298 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ +#include <linux/platform_device.h> +#include <linux/mfd/syscon.h> +#include "meson-aoclk.h" +#include "gxbb-aoclk.h" + +#include "clk-regmap.h" +#include "clk-dualdiv.h" + +/* AO Configuration Clock registers offsets */ +#define AO_RTI_PWR_CNTL_REG1 0x0c +#define AO_RTI_PWR_CNTL_REG0 0x10 +#define AO_RTI_GEN_CNTL_REG0 0x40 +#define AO_OSCIN_CNTL 0x58 +#define AO_CRT_CLK_CNTL1 0x68 +#define AO_RTC_ALT_CLK_CNTL0 0x94 +#define AO_RTC_ALT_CLK_CNTL1 0x98 + +#define GXBB_AO_GATE(_name, _bit) \ +static struct clk_regmap _name##_ao = { \ + .data = &(struct clk_regmap_gate_data) { \ + .offset = AO_RTI_GEN_CNTL_REG0, \ + .bit_idx = (_bit), \ + }, \ + .hw.init = &(struct clk_init_data) { \ + .name = #_name "_ao", \ + .ops = &clk_regmap_gate_ops, \ + .parent_data = &(const struct clk_parent_data) { \ + .fw_name = "mpeg-clk", \ + }, \ + .num_parents = 1, \ + .flags = CLK_IGNORE_UNUSED, \ + }, \ +} + +GXBB_AO_GATE(remote, 0); +GXBB_AO_GATE(i2c_master, 1); +GXBB_AO_GATE(i2c_slave, 2); +GXBB_AO_GATE(uart1, 3); +GXBB_AO_GATE(uart2, 5); +GXBB_AO_GATE(ir_blaster, 6); + +static struct clk_regmap ao_cts_oscin = { + .data = &(struct clk_regmap_gate_data){ + .offset = AO_RTI_PWR_CNTL_REG0, + .bit_idx = 6, + }, + .hw.init = &(struct clk_init_data){ + .name = "ao_cts_oscin", + .ops = &clk_regmap_gate_ro_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap ao_32k_pre = { + .data = &(struct clk_regmap_gate_data){ + .offset = AO_RTC_ALT_CLK_CNTL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "ao_32k_pre", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &ao_cts_oscin.hw }, + .num_parents = 1, + }, +}; + +static const struct meson_clk_dualdiv_param gxbb_32k_div_table[] = { + { + .dual = 1, + .n1 = 733, + .m1 = 8, + .n2 = 732, + .m2 = 11, + }, {} +}; + +static struct clk_regmap ao_32k_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = AO_RTC_ALT_CLK_CNTL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = AO_RTC_ALT_CLK_CNTL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = AO_RTC_ALT_CLK_CNTL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = AO_RTC_ALT_CLK_CNTL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = AO_RTC_ALT_CLK_CNTL0, + .shift = 28, + .width = 1, + }, + .table = gxbb_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "ao_32k_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { &ao_32k_pre.hw }, + .num_parents = 1, + }, +}; + +static struct clk_regmap ao_32k_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = AO_RTC_ALT_CLK_CNTL1, + .mask = 0x1, + .shift = 24, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "ao_32k_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &ao_32k_div.hw, + &ao_32k_pre.hw + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap ao_32k = { + .data = &(struct clk_regmap_gate_data){ + .offset = AO_RTC_ALT_CLK_CNTL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data){ + .name = "ao_32k", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { &ao_32k_sel.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap ao_cts_rtc_oscin = { + .data = &(struct clk_regmap_mux_data) { + .offset = AO_RTI_PWR_CNTL_REG0, + .mask = 0x7, + .shift = 10, + .table = (u32[]){ 1, 2, 3, 4 }, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "ao_cts_rtc_oscin", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "ext-32k-0", }, + { .fw_name = "ext-32k-1", }, + { .fw_name = "ext-32k-2", }, + { .hw = &ao_32k.hw }, + }, + .num_parents = 4, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap ao_clk81 = { + .data = &(struct clk_regmap_mux_data) { + .offset = AO_RTI_PWR_CNTL_REG0, + .mask = 0x1, + .shift = 0, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "ao_clk81", + .ops = &clk_regmap_mux_ro_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "mpeg-clk", }, + { .hw = &ao_cts_rtc_oscin.hw }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap ao_cts_cec = { + .data = &(struct clk_regmap_mux_data) { + .offset = AO_CRT_CLK_CNTL1, + .mask = 0x1, + .shift = 27, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "ao_cts_cec", + .ops = &clk_regmap_mux_ops, + /* + * FIXME: The 'fixme' parent obviously does not exist. + * + * ATM, CCF won't call get_parent() if num_parents is 1. It + * does not allow NULL as a parent name either. + * + * On this particular mux, we only know the input #1 parent + * but, on boot, unknown input #0 is set, so it is critical + * to call .get_parent() on it + * + * Until CCF gets fixed, adding this fake parent that won't + * ever be registered should work around the problem + */ + .parent_data = (const struct clk_parent_data []) { + { .name = "fixme", .index = -1, }, + { .hw = &ao_cts_rtc_oscin.hw }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const unsigned int gxbb_aoclk_reset[] = { + [RESET_AO_REMOTE] = 16, + [RESET_AO_I2C_MASTER] = 18, + [RESET_AO_I2C_SLAVE] = 19, + [RESET_AO_UART1] = 17, + [RESET_AO_UART2] = 22, + [RESET_AO_IR_BLASTER] = 23, +}; + +static struct clk_regmap *gxbb_aoclk[] = { + &remote_ao, + &i2c_master_ao, + &i2c_slave_ao, + &uart1_ao, + &uart2_ao, + &ir_blaster_ao, + &ao_cts_oscin, + &ao_32k_pre, + &ao_32k_div, + &ao_32k_sel, + &ao_32k, + &ao_cts_rtc_oscin, + &ao_clk81, + &ao_cts_cec, +}; + +static const struct clk_hw_onecell_data gxbb_aoclk_onecell_data = { + .hws = { + [CLKID_AO_REMOTE] = &remote_ao.hw, + [CLKID_AO_I2C_MASTER] = &i2c_master_ao.hw, + [CLKID_AO_I2C_SLAVE] = &i2c_slave_ao.hw, + [CLKID_AO_UART1] = &uart1_ao.hw, + [CLKID_AO_UART2] = &uart2_ao.hw, + [CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw, + [CLKID_AO_CEC_32K] = &ao_cts_cec.hw, + [CLKID_AO_CTS_OSCIN] = &ao_cts_oscin.hw, + [CLKID_AO_32K_PRE] = &ao_32k_pre.hw, + [CLKID_AO_32K_DIV] = &ao_32k_div.hw, + [CLKID_AO_32K_SEL] = &ao_32k_sel.hw, + [CLKID_AO_32K] = &ao_32k.hw, + [CLKID_AO_CTS_RTC_OSCIN] = &ao_cts_rtc_oscin.hw, + [CLKID_AO_CLK81] = &ao_clk81.hw, + }, + .num = NR_CLKS, +}; + +static const struct meson_aoclk_data gxbb_aoclkc_data = { + .reset_reg = AO_RTI_GEN_CNTL_REG0, + .num_reset = ARRAY_SIZE(gxbb_aoclk_reset), + .reset = gxbb_aoclk_reset, + .num_clks = ARRAY_SIZE(gxbb_aoclk), + .clks = gxbb_aoclk, + .hw_data = &gxbb_aoclk_onecell_data, +}; + +static const struct of_device_id gxbb_aoclkc_match_table[] = { + { + .compatible = "amlogic,meson-gx-aoclkc", + .data = &gxbb_aoclkc_data, + }, + { } +}; + +static struct platform_driver gxbb_aoclkc_driver = { + .probe = meson_aoclkc_probe, + .driver = { + .name = "gxbb-aoclkc", + .of_match_table = gxbb_aoclkc_match_table, + }, +}; +builtin_platform_driver(gxbb_aoclkc_driver); |