diff options
Diffstat (limited to 'drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c')
| -rw-r--r-- | drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c new file mode 100644 index 000000000..50f8d1bc7 --- /dev/null +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz> + */ + +#include <linux/clk-provider.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> + +#include "ccu_common.h" +#include "ccu_reset.h" + +#include "ccu_div.h" +#include "ccu_gate.h" +#include "ccu_mp.h" +#include "ccu_nm.h" + +#include "ccu-sun50i-h6-r.h" + +/* + * Information about AR100 and AHB/APB clocks in R_CCU are gathered from + * clock definitions in the BSP source code. + */ + +static const char * const ar100_r_apb2_parents[] = { "osc24M", "osc32k", + "iosc", "pll-periph0" }; +static const struct ccu_mux_var_prediv ar100_r_apb2_predivs[] = { + { .index = 3, .shift = 0, .width = 5 }, +}; + +static struct ccu_div ar100_clk = { + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), + + .mux = { + .shift = 24, + .width = 2, + + .var_predivs = ar100_r_apb2_predivs, + .n_var_predivs = ARRAY_SIZE(ar100_r_apb2_predivs), + }, + + .common = { + .reg = 0x000, + .features = CCU_FEATURE_VARIABLE_PREDIV, + .hw.init = CLK_HW_INIT_PARENTS("ar100", + ar100_r_apb2_parents, + &ccu_div_ops, + 0), + }, +}; + +static CLK_FIXED_FACTOR_HW(r_ahb_clk, "r-ahb", &ar100_clk.common.hw, 1, 1, 0); + +static SUNXI_CCU_M(r_apb1_clk, "r-apb1", "r-ahb", 0x00c, 0, 2, 0); + +static struct ccu_div r_apb2_clk = { + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), + + .mux = { + .shift = 24, + .width = 2, + + .var_predivs = ar100_r_apb2_predivs, + .n_var_predivs = ARRAY_SIZE(ar100_r_apb2_predivs), + }, + + .common = { + .reg = 0x010, + .features = CCU_FEATURE_VARIABLE_PREDIV, + .hw.init = CLK_HW_INIT_PARENTS("r-apb2", + ar100_r_apb2_parents, + &ccu_div_ops, + 0), + }, +}; + +/* + * Information about the gate/resets are gathered from the clock header file + * in the BSP source code, although most of them are unused. The existence + * of the hardware block is verified with "3.1 Memory Mapping" chapter in + * "Allwinner H6 V200 User Manual V1.1"; and the parent APB buses are verified + * with "3.3.2.1 System Bus Tree" chapter inthe same document. + */ +static SUNXI_CCU_GATE(r_apb1_timer_clk, "r-apb1-timer", "r-apb1", + 0x11c, BIT(0), 0); +static SUNXI_CCU_GATE(r_apb1_twd_clk, "r-apb1-twd", "r-apb1", + 0x12c, BIT(0), 0); +static SUNXI_CCU_GATE(r_apb1_pwm_clk, "r-apb1-pwm", "r-apb1", + 0x13c, BIT(0), 0); +static SUNXI_CCU_GATE(r_apb2_uart_clk, "r-apb2-uart", "r-apb2", + 0x18c, BIT(0), 0); +static SUNXI_CCU_GATE(r_apb2_i2c_clk, "r-apb2-i2c", "r-apb2", + 0x19c, BIT(0), 0); +static SUNXI_CCU_GATE(r_apb1_ir_clk, "r-apb1-ir", "r-apb1", + 0x1cc, BIT(0), 0); +static SUNXI_CCU_GATE(r_apb1_w1_clk, "r-apb1-w1", "r-apb1", + 0x1ec, BIT(0), 0); + +/* Information of IR(RX) mod clock is gathered from BSP source code */ +static const char * const r_mod0_default_parents[] = { "osc32k", "osc24M" }; +static SUNXI_CCU_MP_WITH_MUX_GATE(ir_clk, "ir", + r_mod0_default_parents, 0x1c0, + 0, 5, /* M */ + 8, 2, /* P */ + 24, 1, /* mux */ + BIT(31), /* gate */ + 0); + +/* + * BSP didn't use the 1-wire function at all now, and the information about + * this mod clock is guessed from the IR mod clock above. The existence of + * this mod clock is proven by BSP clock header, and the dividers are verified + * by contents in the 1-wire related chapter of the User Manual. + */ + +static SUNXI_CCU_MP_WITH_MUX_GATE(w1_clk, "w1", + r_mod0_default_parents, 0x1e0, + 0, 5, /* M */ + 8, 2, /* P */ + 24, 1, /* mux */ + BIT(31), /* gate */ + 0); + +static struct ccu_common *sun50i_h6_r_ccu_clks[] = { + &ar100_clk.common, + &r_apb1_clk.common, + &r_apb2_clk.common, + &r_apb1_timer_clk.common, + &r_apb1_twd_clk.common, + &r_apb1_pwm_clk.common, + &r_apb2_uart_clk.common, + &r_apb2_i2c_clk.common, + &r_apb1_ir_clk.common, + &r_apb1_w1_clk.common, + &ir_clk.common, + &w1_clk.common, +}; + +static struct clk_hw_onecell_data sun50i_h6_r_hw_clks = { + .hws = { + [CLK_AR100] = &ar100_clk.common.hw, + [CLK_R_AHB] = &r_ahb_clk.hw, + [CLK_R_APB1] = &r_apb1_clk.common.hw, + [CLK_R_APB2] = &r_apb2_clk.common.hw, + [CLK_R_APB1_TIMER] = &r_apb1_timer_clk.common.hw, + [CLK_R_APB1_TWD] = &r_apb1_twd_clk.common.hw, + [CLK_R_APB1_PWM] = &r_apb1_pwm_clk.common.hw, + [CLK_R_APB2_UART] = &r_apb2_uart_clk.common.hw, + [CLK_R_APB2_I2C] = &r_apb2_i2c_clk.common.hw, + [CLK_R_APB1_IR] = &r_apb1_ir_clk.common.hw, + [CLK_R_APB1_W1] = &r_apb1_w1_clk.common.hw, + [CLK_IR] = &ir_clk.common.hw, + [CLK_W1] = &w1_clk.common.hw, + }, + .num = CLK_NUMBER, +}; + +static struct ccu_reset_map sun50i_h6_r_ccu_resets[] = { + [RST_R_APB1_TIMER] = { 0x11c, BIT(16) }, + [RST_R_APB1_TWD] = { 0x12c, BIT(16) }, + [RST_R_APB1_PWM] = { 0x13c, BIT(16) }, + [RST_R_APB2_UART] = { 0x18c, BIT(16) }, + [RST_R_APB2_I2C] = { 0x19c, BIT(16) }, + [RST_R_APB1_IR] = { 0x1cc, BIT(16) }, + [RST_R_APB1_W1] = { 0x1ec, BIT(16) }, +}; + +static const struct sunxi_ccu_desc sun50i_h6_r_ccu_desc = { + .ccu_clks = sun50i_h6_r_ccu_clks, + .num_ccu_clks = ARRAY_SIZE(sun50i_h6_r_ccu_clks), + + .hw_clks = &sun50i_h6_r_hw_clks, + + .resets = sun50i_h6_r_ccu_resets, + .num_resets = ARRAY_SIZE(sun50i_h6_r_ccu_resets), +}; + +static void __init sunxi_r_ccu_init(struct device_node *node, + const struct sunxi_ccu_desc *desc) +{ + void __iomem *reg; + + reg = of_io_request_and_map(node, 0, of_node_full_name(node)); + if (IS_ERR(reg)) { + pr_err("%pOF: Could not map the clock registers\n", node); + return; + } + + sunxi_ccu_probe(node, reg, desc); +} + +static void __init sun50i_h6_r_ccu_setup(struct device_node *node) +{ + sunxi_r_ccu_init(node, &sun50i_h6_r_ccu_desc); +} +CLK_OF_DECLARE(sun50i_h6_r_ccu, "allwinner,sun50i-h6-r-ccu", + sun50i_h6_r_ccu_setup); |