diff options
Diffstat (limited to 'drivers/dma/ste_dma40_ll.c')
| -rw-r--r-- | drivers/dma/ste_dma40_ll.c | 448 |
1 files changed, 448 insertions, 0 deletions
diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c new file mode 100644 index 000000000..b5287c661 --- /dev/null +++ b/drivers/dma/ste_dma40_ll.c @@ -0,0 +1,448 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) ST-Ericsson SA 2007-2010 + * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson + */ + +#include <linux/kernel.h> +#include <linux/platform_data/dma-ste-dma40.h> + +#include "ste_dma40_ll.h" + +static u8 d40_width_to_bits(enum dma_slave_buswidth width) +{ + if (width == DMA_SLAVE_BUSWIDTH_1_BYTE) + return STEDMA40_ESIZE_8_BIT; + else if (width == DMA_SLAVE_BUSWIDTH_2_BYTES) + return STEDMA40_ESIZE_16_BIT; + else if (width == DMA_SLAVE_BUSWIDTH_8_BYTES) + return STEDMA40_ESIZE_64_BIT; + else + return STEDMA40_ESIZE_32_BIT; +} + +/* Sets up proper LCSP1 and LCSP3 register for a logical channel */ +void d40_log_cfg(struct stedma40_chan_cfg *cfg, + u32 *lcsp1, u32 *lcsp3) +{ + u32 l3 = 0; /* dst */ + u32 l1 = 0; /* src */ + + /* src is mem? -> increase address pos */ + if (cfg->dir == DMA_MEM_TO_DEV || + cfg->dir == DMA_MEM_TO_MEM) + l1 |= BIT(D40_MEM_LCSP1_SCFG_INCR_POS); + + /* dst is mem? -> increase address pos */ + if (cfg->dir == DMA_DEV_TO_MEM || + cfg->dir == DMA_MEM_TO_MEM) + l3 |= BIT(D40_MEM_LCSP3_DCFG_INCR_POS); + + /* src is hw? -> master port 1 */ + if (cfg->dir == DMA_DEV_TO_MEM || + cfg->dir == DMA_DEV_TO_DEV) + l1 |= BIT(D40_MEM_LCSP1_SCFG_MST_POS); + + /* dst is hw? -> master port 1 */ + if (cfg->dir == DMA_MEM_TO_DEV || + cfg->dir == DMA_DEV_TO_DEV) + l3 |= BIT(D40_MEM_LCSP3_DCFG_MST_POS); + + l3 |= BIT(D40_MEM_LCSP3_DCFG_EIM_POS); + l3 |= cfg->dst_info.psize << D40_MEM_LCSP3_DCFG_PSIZE_POS; + l3 |= d40_width_to_bits(cfg->dst_info.data_width) + << D40_MEM_LCSP3_DCFG_ESIZE_POS; + + l1 |= BIT(D40_MEM_LCSP1_SCFG_EIM_POS); + l1 |= cfg->src_info.psize << D40_MEM_LCSP1_SCFG_PSIZE_POS; + l1 |= d40_width_to_bits(cfg->src_info.data_width) + << D40_MEM_LCSP1_SCFG_ESIZE_POS; + + *lcsp1 = l1; + *lcsp3 = l3; + +} + +void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg) +{ + u32 src = 0; + u32 dst = 0; + + if ((cfg->dir == DMA_DEV_TO_MEM) || + (cfg->dir == DMA_DEV_TO_DEV)) { + /* Set master port to 1 */ + src |= BIT(D40_SREG_CFG_MST_POS); + src |= D40_TYPE_TO_EVENT(cfg->dev_type); + + if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) + src |= BIT(D40_SREG_CFG_PHY_TM_POS); + else + src |= 3 << D40_SREG_CFG_PHY_TM_POS; + } + if ((cfg->dir == DMA_MEM_TO_DEV) || + (cfg->dir == DMA_DEV_TO_DEV)) { + /* Set master port to 1 */ + dst |= BIT(D40_SREG_CFG_MST_POS); + dst |= D40_TYPE_TO_EVENT(cfg->dev_type); + + if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) + dst |= BIT(D40_SREG_CFG_PHY_TM_POS); + else + dst |= 3 << D40_SREG_CFG_PHY_TM_POS; + } + /* Interrupt on end of transfer for destination */ + dst |= BIT(D40_SREG_CFG_TIM_POS); + + /* Generate interrupt on error */ + src |= BIT(D40_SREG_CFG_EIM_POS); + dst |= BIT(D40_SREG_CFG_EIM_POS); + + /* PSIZE */ + if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) { + src |= BIT(D40_SREG_CFG_PHY_PEN_POS); + src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS; + } + if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) { + dst |= BIT(D40_SREG_CFG_PHY_PEN_POS); + dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS; + } + + /* Element size */ + src |= d40_width_to_bits(cfg->src_info.data_width) + << D40_SREG_CFG_ESIZE_POS; + dst |= d40_width_to_bits(cfg->dst_info.data_width) + << D40_SREG_CFG_ESIZE_POS; + + /* Set the priority bit to high for the physical channel */ + if (cfg->high_priority) { + src |= BIT(D40_SREG_CFG_PRI_POS); + dst |= BIT(D40_SREG_CFG_PRI_POS); + } + + if (cfg->src_info.big_endian) + src |= BIT(D40_SREG_CFG_LBE_POS); + if (cfg->dst_info.big_endian) + dst |= BIT(D40_SREG_CFG_LBE_POS); + + *src_cfg = src; + *dst_cfg = dst; +} + +static int d40_phy_fill_lli(struct d40_phy_lli *lli, + dma_addr_t data, + u32 data_size, + dma_addr_t next_lli, + u32 reg_cfg, + struct stedma40_half_channel_info *info, + unsigned int flags) +{ + bool addr_inc = flags & LLI_ADDR_INC; + bool term_int = flags & LLI_TERM_INT; + unsigned int data_width = info->data_width; + int psize = info->psize; + int num_elems; + + if (psize == STEDMA40_PSIZE_PHY_1) + num_elems = 1; + else + num_elems = 2 << psize; + + /* Must be aligned */ + if (!IS_ALIGNED(data, data_width)) + return -EINVAL; + + /* Transfer size can't be smaller than (num_elms * elem_size) */ + if (data_size < num_elems * data_width) + return -EINVAL; + + /* The number of elements. IE now many chunks */ + lli->reg_elt = (data_size / data_width) << D40_SREG_ELEM_PHY_ECNT_POS; + + /* + * Distance to next element sized entry. + * Usually the size of the element unless you want gaps. + */ + if (addr_inc) + lli->reg_elt |= data_width << D40_SREG_ELEM_PHY_EIDX_POS; + + /* Where the data is */ + lli->reg_ptr = data; + lli->reg_cfg = reg_cfg; + + /* If this scatter list entry is the last one, no next link */ + if (next_lli == 0) + lli->reg_lnk = BIT(D40_SREG_LNK_PHY_TCP_POS); + else + lli->reg_lnk = next_lli; + + /* Set/clear interrupt generation on this link item.*/ + if (term_int) + lli->reg_cfg |= BIT(D40_SREG_CFG_TIM_POS); + else + lli->reg_cfg &= ~BIT(D40_SREG_CFG_TIM_POS); + + /* + * Post link - D40_SREG_LNK_PHY_PRE_POS = 0 + * Relink happens after transfer completion. + */ + + return 0; +} + +static int d40_seg_size(int size, int data_width1, int data_width2) +{ + u32 max_w = max(data_width1, data_width2); + u32 min_w = min(data_width1, data_width2); + u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE * min_w, max_w); + + if (seg_max > STEDMA40_MAX_SEG_SIZE) + seg_max -= max_w; + + if (size <= seg_max) + return size; + + if (size <= 2 * seg_max) + return ALIGN(size / 2, max_w); + + return seg_max; +} + +static struct d40_phy_lli * +d40_phy_buf_to_lli(struct d40_phy_lli *lli, dma_addr_t addr, u32 size, + dma_addr_t lli_phys, dma_addr_t first_phys, u32 reg_cfg, + struct stedma40_half_channel_info *info, + struct stedma40_half_channel_info *otherinfo, + unsigned long flags) +{ + bool lastlink = flags & LLI_LAST_LINK; + bool addr_inc = flags & LLI_ADDR_INC; + bool term_int = flags & LLI_TERM_INT; + bool cyclic = flags & LLI_CYCLIC; + int err; + dma_addr_t next = lli_phys; + int size_rest = size; + int size_seg = 0; + + /* + * This piece may be split up based on d40_seg_size(); we only want the + * term int on the last part. + */ + if (term_int) + flags &= ~LLI_TERM_INT; + + do { + size_seg = d40_seg_size(size_rest, info->data_width, + otherinfo->data_width); + size_rest -= size_seg; + + if (size_rest == 0 && term_int) + flags |= LLI_TERM_INT; + + if (size_rest == 0 && lastlink) + next = cyclic ? first_phys : 0; + else + next = ALIGN(next + sizeof(struct d40_phy_lli), + D40_LLI_ALIGN); + + err = d40_phy_fill_lli(lli, addr, size_seg, next, + reg_cfg, info, flags); + + if (err) + goto err; + + lli++; + if (addr_inc) + addr += size_seg; + } while (size_rest); + + return lli; + +err: + return NULL; +} + +int d40_phy_sg_to_lli(struct scatterlist *sg, + int sg_len, + dma_addr_t target, + struct d40_phy_lli *lli_sg, + dma_addr_t lli_phys, + u32 reg_cfg, + struct stedma40_half_channel_info *info, + struct stedma40_half_channel_info *otherinfo, + unsigned long flags) +{ + int total_size = 0; + int i; + struct scatterlist *current_sg = sg; + struct d40_phy_lli *lli = lli_sg; + dma_addr_t l_phys = lli_phys; + + if (!target) + flags |= LLI_ADDR_INC; + + for_each_sg(sg, current_sg, sg_len, i) { + dma_addr_t sg_addr = sg_dma_address(current_sg); + unsigned int len = sg_dma_len(current_sg); + dma_addr_t dst = target ?: sg_addr; + + total_size += sg_dma_len(current_sg); + + if (i == sg_len - 1) + flags |= LLI_TERM_INT | LLI_LAST_LINK; + + l_phys = ALIGN(lli_phys + (lli - lli_sg) * + sizeof(struct d40_phy_lli), D40_LLI_ALIGN); + + lli = d40_phy_buf_to_lli(lli, dst, len, l_phys, lli_phys, + reg_cfg, info, otherinfo, flags); + + if (lli == NULL) + return -EINVAL; + } + + return total_size; +} + + +/* DMA logical lli operations */ + +static void d40_log_lli_link(struct d40_log_lli *lli_dst, + struct d40_log_lli *lli_src, + int next, unsigned int flags) +{ + bool interrupt = flags & LLI_TERM_INT; + u32 slos = 0; + u32 dlos = 0; + + if (next != -EINVAL) { + slos = next * 2; + dlos = next * 2 + 1; + } + + if (interrupt) { + lli_dst->lcsp13 |= D40_MEM_LCSP1_SCFG_TIM_MASK; + lli_dst->lcsp13 |= D40_MEM_LCSP3_DTCP_MASK; + } + + lli_src->lcsp13 = (lli_src->lcsp13 & ~D40_MEM_LCSP1_SLOS_MASK) | + (slos << D40_MEM_LCSP1_SLOS_POS); + + lli_dst->lcsp13 = (lli_dst->lcsp13 & ~D40_MEM_LCSP1_SLOS_MASK) | + (dlos << D40_MEM_LCSP1_SLOS_POS); +} + +void d40_log_lli_lcpa_write(struct d40_log_lli_full *lcpa, + struct d40_log_lli *lli_dst, + struct d40_log_lli *lli_src, + int next, unsigned int flags) +{ + d40_log_lli_link(lli_dst, lli_src, next, flags); + + writel_relaxed(lli_src->lcsp02, &lcpa[0].lcsp0); + writel_relaxed(lli_src->lcsp13, &lcpa[0].lcsp1); + writel_relaxed(lli_dst->lcsp02, &lcpa[0].lcsp2); + writel_relaxed(lli_dst->lcsp13, &lcpa[0].lcsp3); +} + +void d40_log_lli_lcla_write(struct d40_log_lli *lcla, + struct d40_log_lli *lli_dst, + struct d40_log_lli *lli_src, + int next, unsigned int flags) +{ + d40_log_lli_link(lli_dst, lli_src, next, flags); + + writel_relaxed(lli_src->lcsp02, &lcla[0].lcsp02); + writel_relaxed(lli_src->lcsp13, &lcla[0].lcsp13); + writel_relaxed(lli_dst->lcsp02, &lcla[1].lcsp02); + writel_relaxed(lli_dst->lcsp13, &lcla[1].lcsp13); +} + +static void d40_log_fill_lli(struct d40_log_lli *lli, + dma_addr_t data, u32 data_size, + u32 reg_cfg, + u32 data_width, + unsigned int flags) +{ + bool addr_inc = flags & LLI_ADDR_INC; + + lli->lcsp13 = reg_cfg; + + /* The number of elements to transfer */ + lli->lcsp02 = ((data_size / data_width) << + D40_MEM_LCSP0_ECNT_POS) & D40_MEM_LCSP0_ECNT_MASK; + + BUG_ON((data_size / data_width) > STEDMA40_MAX_SEG_SIZE); + + /* 16 LSBs address of the current element */ + lli->lcsp02 |= data & D40_MEM_LCSP0_SPTR_MASK; + /* 16 MSBs address of the current element */ + lli->lcsp13 |= data & D40_MEM_LCSP1_SPTR_MASK; + + if (addr_inc) + lli->lcsp13 |= D40_MEM_LCSP1_SCFG_INCR_MASK; + +} + +static struct d40_log_lli *d40_log_buf_to_lli(struct d40_log_lli *lli_sg, + dma_addr_t addr, + int size, + u32 lcsp13, /* src or dst*/ + u32 data_width1, + u32 data_width2, + unsigned int flags) +{ + bool addr_inc = flags & LLI_ADDR_INC; + struct d40_log_lli *lli = lli_sg; + int size_rest = size; + int size_seg = 0; + + do { + size_seg = d40_seg_size(size_rest, data_width1, data_width2); + size_rest -= size_seg; + + d40_log_fill_lli(lli, + addr, + size_seg, + lcsp13, data_width1, + flags); + if (addr_inc) + addr += size_seg; + lli++; + } while (size_rest); + + return lli; +} + +int d40_log_sg_to_lli(struct scatterlist *sg, + int sg_len, + dma_addr_t dev_addr, + struct d40_log_lli *lli_sg, + u32 lcsp13, /* src or dst*/ + u32 data_width1, u32 data_width2) +{ + int total_size = 0; + struct scatterlist *current_sg = sg; + int i; + struct d40_log_lli *lli = lli_sg; + unsigned long flags = 0; + + if (!dev_addr) + flags |= LLI_ADDR_INC; + + for_each_sg(sg, current_sg, sg_len, i) { + dma_addr_t sg_addr = sg_dma_address(current_sg); + unsigned int len = sg_dma_len(current_sg); + dma_addr_t addr = dev_addr ?: sg_addr; + + total_size += sg_dma_len(current_sg); + + lli = d40_log_buf_to_lli(lli, addr, len, + lcsp13, + data_width1, + data_width2, + flags); + } + + return total_size; +} |