diff options
Diffstat (limited to 'drivers/firmware/efi/libstub/arm32-stub.c')
| -rw-r--r-- | drivers/firmware/efi/libstub/arm32-stub.c | 170 |
1 files changed, 170 insertions, 0 deletions
diff --git a/drivers/firmware/efi/libstub/arm32-stub.c b/drivers/firmware/efi/libstub/arm32-stub.c new file mode 100644 index 000000000..4b5b2403b --- /dev/null +++ b/drivers/firmware/efi/libstub/arm32-stub.c @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2013 Linaro Ltd; <roy.franz@linaro.org> + */ +#include <linux/efi.h> +#include <asm/efi.h> + +#include "efistub.h" + +static efi_guid_t cpu_state_guid = LINUX_EFI_ARM_CPU_STATE_TABLE_GUID; + +struct efi_arm_entry_state *efi_entry_state; + +static void get_cpu_state(u32 *cpsr, u32 *sctlr) +{ + asm("mrs %0, cpsr" : "=r"(*cpsr)); + if ((*cpsr & MODE_MASK) == HYP_MODE) + asm("mrc p15, 4, %0, c1, c0, 0" : "=r"(*sctlr)); + else + asm("mrc p15, 0, %0, c1, c0, 0" : "=r"(*sctlr)); +} + +efi_status_t check_platform_features(void) +{ + efi_status_t status; + u32 cpsr, sctlr; + int block; + + get_cpu_state(&cpsr, &sctlr); + + efi_info("Entering in %s mode with MMU %sabled\n", + ((cpsr & MODE_MASK) == HYP_MODE) ? "HYP" : "SVC", + (sctlr & 1) ? "en" : "dis"); + + status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, + sizeof(*efi_entry_state), + (void **)&efi_entry_state); + if (status != EFI_SUCCESS) { + efi_err("allocate_pool() failed\n"); + return status; + } + + efi_entry_state->cpsr_before_ebs = cpsr; + efi_entry_state->sctlr_before_ebs = sctlr; + + status = efi_bs_call(install_configuration_table, &cpu_state_guid, + efi_entry_state); + if (status != EFI_SUCCESS) { + efi_err("install_configuration_table() failed\n"); + goto free_state; + } + + /* non-LPAE kernels can run anywhere */ + if (!IS_ENABLED(CONFIG_ARM_LPAE)) + return EFI_SUCCESS; + + /* LPAE kernels need compatible hardware */ + block = cpuid_feature_extract(CPUID_EXT_MMFR0, 0); + if (block < 5) { + efi_err("This LPAE kernel is not supported by your CPU\n"); + status = EFI_UNSUPPORTED; + goto drop_table; + } + return EFI_SUCCESS; + +drop_table: + efi_bs_call(install_configuration_table, &cpu_state_guid, NULL); +free_state: + efi_bs_call(free_pool, efi_entry_state); + return status; +} + +void efi_handle_post_ebs_state(void) +{ + get_cpu_state(&efi_entry_state->cpsr_after_ebs, + &efi_entry_state->sctlr_after_ebs); +} + +static efi_guid_t screen_info_guid = LINUX_EFI_ARM_SCREEN_INFO_TABLE_GUID; + +struct screen_info *alloc_screen_info(void) +{ + struct screen_info *si; + efi_status_t status; + + /* + * Unlike on arm64, where we can directly fill out the screen_info + * structure from the stub, we need to allocate a buffer to hold + * its contents while we hand over to the kernel proper from the + * decompressor. + */ + status = efi_bs_call(allocate_pool, EFI_RUNTIME_SERVICES_DATA, + sizeof(*si), (void **)&si); + + if (status != EFI_SUCCESS) + return NULL; + + status = efi_bs_call(install_configuration_table, + &screen_info_guid, si); + if (status == EFI_SUCCESS) + return si; + + efi_bs_call(free_pool, si); + return NULL; +} + +void free_screen_info(struct screen_info *si) +{ + if (!si) + return; + + efi_bs_call(install_configuration_table, &screen_info_guid, NULL); + efi_bs_call(free_pool, si); +} + +efi_status_t handle_kernel_image(unsigned long *image_addr, + unsigned long *image_size, + unsigned long *reserve_addr, + unsigned long *reserve_size, + efi_loaded_image_t *image) +{ + const int slack = TEXT_OFFSET - 5 * PAGE_SIZE; + int alloc_size = MAX_UNCOMP_KERNEL_SIZE + EFI_PHYS_ALIGN; + unsigned long alloc_base, kernel_base; + efi_status_t status; + + /* + * Allocate space for the decompressed kernel as low as possible. + * The region should be 16 MiB aligned, but the first 'slack' bytes + * are not used by Linux, so we allow those to be occupied by the + * firmware. + */ + status = efi_low_alloc_above(alloc_size, EFI_PAGE_SIZE, &alloc_base, 0x0); + if (status != EFI_SUCCESS) { + efi_err("Unable to allocate memory for uncompressed kernel.\n"); + return status; + } + + if ((alloc_base % EFI_PHYS_ALIGN) > slack) { + /* + * More than 'slack' bytes are already occupied at the base of + * the allocation, so we need to advance to the next 16 MiB block. + */ + kernel_base = round_up(alloc_base, EFI_PHYS_ALIGN); + efi_info("Free memory starts at 0x%lx, setting kernel_base to 0x%lx\n", + alloc_base, kernel_base); + } else { + kernel_base = round_down(alloc_base, EFI_PHYS_ALIGN); + } + + *reserve_addr = kernel_base + slack; + *reserve_size = MAX_UNCOMP_KERNEL_SIZE; + + /* now free the parts that we will not use */ + if (*reserve_addr > alloc_base) { + efi_bs_call(free_pages, alloc_base, + (*reserve_addr - alloc_base) / EFI_PAGE_SIZE); + alloc_size -= *reserve_addr - alloc_base; + } + efi_bs_call(free_pages, *reserve_addr + MAX_UNCOMP_KERNEL_SIZE, + (alloc_size - MAX_UNCOMP_KERNEL_SIZE) / EFI_PAGE_SIZE); + + *image_addr = kernel_base + TEXT_OFFSET; + *image_size = 0; + + efi_debug("image addr == 0x%lx, reserve_addr == 0x%lx\n", + *image_addr, *reserve_addr); + + return EFI_SUCCESS; +} |