summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/w83627hf.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/w83627hf.c')
-rw-r--r--drivers/hwmon/w83627hf.c2005
1 files changed, 2005 insertions, 0 deletions
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
new file mode 100644
index 000000000..a07b97400
--- /dev/null
+++ b/drivers/hwmon/w83627hf.c
@@ -0,0 +1,2005 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * w83627hf.c - Part of lm_sensors, Linux kernel modules for hardware
+ * monitoring
+ * Copyright (c) 1998 - 2003 Frodo Looijaard <frodol@dds.nl>,
+ * Philip Edelbrock <phil@netroedge.com>,
+ * and Mark Studebaker <mdsxyz123@yahoo.com>
+ * Ported to 2.6 by Bernhard C. Schrenk <clemy@clemy.org>
+ * Copyright (c) 2007 - 1012 Jean Delvare <jdelvare@suse.de>
+ */
+
+/*
+ * Supports following chips:
+ *
+ * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ * w83627hf 9 3 2 3 0x20 0x5ca3 no yes(LPC)
+ * w83627thf 7 3 3 3 0x90 0x5ca3 no yes(LPC)
+ * w83637hf 7 3 3 3 0x80 0x5ca3 no yes(LPC)
+ * w83687thf 7 3 3 3 0x90 0x5ca3 no yes(LPC)
+ * w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC)
+ *
+ * For other winbond chips, and for i2c support in the above chips,
+ * use w83781d.c.
+ *
+ * Note: automatic ("cruise") fan control for 697, 637 & 627thf not
+ * supported yet.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/ioport.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include "lm75.h"
+
+static struct platform_device *pdev;
+
+#define DRVNAME "w83627hf"
+enum chips { w83627hf, w83627thf, w83697hf, w83637hf, w83687thf };
+
+struct w83627hf_sio_data {
+ enum chips type;
+ int sioaddr;
+};
+
+static u8 force_i2c = 0x1f;
+module_param(force_i2c, byte, 0);
+MODULE_PARM_DESC(force_i2c,
+ "Initialize the i2c address of the sensors");
+
+static bool init = 1;
+module_param(init, bool, 0);
+MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
+
+static unsigned short force_id;
+module_param(force_id, ushort, 0);
+MODULE_PARM_DESC(force_id, "Override the detected device ID");
+
+/* modified from kernel/include/traps.c */
+#define DEV 0x07 /* Register: Logical device select */
+
+/* logical device numbers for superio_select (below) */
+#define W83627HF_LD_FDC 0x00
+#define W83627HF_LD_PRT 0x01
+#define W83627HF_LD_UART1 0x02
+#define W83627HF_LD_UART2 0x03
+#define W83627HF_LD_KBC 0x05
+#define W83627HF_LD_CIR 0x06 /* w83627hf only */
+#define W83627HF_LD_GAME 0x07
+#define W83627HF_LD_MIDI 0x07
+#define W83627HF_LD_GPIO1 0x07
+#define W83627HF_LD_GPIO5 0x07 /* w83627thf only */
+#define W83627HF_LD_GPIO2 0x08
+#define W83627HF_LD_GPIO3 0x09
+#define W83627HF_LD_GPIO4 0x09 /* w83627thf only */
+#define W83627HF_LD_ACPI 0x0a
+#define W83627HF_LD_HWM 0x0b
+
+#define DEVID 0x20 /* Register: Device ID */
+
+#define W83627THF_GPIO5_EN 0x30 /* w83627thf only */
+#define W83627THF_GPIO5_IOSR 0xf3 /* w83627thf only */
+#define W83627THF_GPIO5_DR 0xf4 /* w83627thf only */
+
+#define W83687THF_VID_EN 0x29 /* w83687thf only */
+#define W83687THF_VID_CFG 0xF0 /* w83687thf only */
+#define W83687THF_VID_DATA 0xF1 /* w83687thf only */
+
+static inline void
+superio_outb(struct w83627hf_sio_data *sio, int reg, int val)
+{
+ outb(reg, sio->sioaddr);
+ outb(val, sio->sioaddr + 1);
+}
+
+static inline int
+superio_inb(struct w83627hf_sio_data *sio, int reg)
+{
+ outb(reg, sio->sioaddr);
+ return inb(sio->sioaddr + 1);
+}
+
+static inline void
+superio_select(struct w83627hf_sio_data *sio, int ld)
+{
+ outb(DEV, sio->sioaddr);
+ outb(ld, sio->sioaddr + 1);
+}
+
+static inline int
+superio_enter(struct w83627hf_sio_data *sio)
+{
+ if (!request_muxed_region(sio->sioaddr, 2, DRVNAME))
+ return -EBUSY;
+
+ outb(0x87, sio->sioaddr);
+ outb(0x87, sio->sioaddr);
+
+ return 0;
+}
+
+static inline void
+superio_exit(struct w83627hf_sio_data *sio)
+{
+ outb(0xAA, sio->sioaddr);
+ release_region(sio->sioaddr, 2);
+}
+
+#define W627_DEVID 0x52
+#define W627THF_DEVID 0x82
+#define W697_DEVID 0x60
+#define W637_DEVID 0x70
+#define W687THF_DEVID 0x85
+#define WINB_ACT_REG 0x30
+#define WINB_BASE_REG 0x60
+/* Constants specified below */
+
+/* Alignment of the base address */
+#define WINB_ALIGNMENT ~7
+
+/* Offset & size of I/O region we are interested in */
+#define WINB_REGION_OFFSET 5
+#define WINB_REGION_SIZE 2
+
+/* Where are the sensors address/data registers relative to the region offset */
+#define W83781D_ADDR_REG_OFFSET 0
+#define W83781D_DATA_REG_OFFSET 1
+
+/* The W83781D registers */
+/* The W83782D registers for nr=7,8 are in bank 5 */
+#define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \
+ (0x554 + (((nr) - 7) * 2)))
+#define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \
+ (0x555 + (((nr) - 7) * 2)))
+#define W83781D_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \
+ (0x550 + (nr) - 7))
+
+/* nr:0-2 for fans:1-3 */
+#define W83627HF_REG_FAN_MIN(nr) (0x3b + (nr))
+#define W83627HF_REG_FAN(nr) (0x28 + (nr))
+
+#define W83627HF_REG_TEMP2_CONFIG 0x152
+#define W83627HF_REG_TEMP3_CONFIG 0x252
+/* these are zero-based, unlike config constants above */
+static const u16 w83627hf_reg_temp[] = { 0x27, 0x150, 0x250 };
+static const u16 w83627hf_reg_temp_hyst[] = { 0x3A, 0x153, 0x253 };
+static const u16 w83627hf_reg_temp_over[] = { 0x39, 0x155, 0x255 };
+
+#define W83781D_REG_BANK 0x4E
+
+#define W83781D_REG_CONFIG 0x40
+#define W83781D_REG_ALARM1 0x459
+#define W83781D_REG_ALARM2 0x45A
+#define W83781D_REG_ALARM3 0x45B
+
+#define W83781D_REG_BEEP_CONFIG 0x4D
+#define W83781D_REG_BEEP_INTS1 0x56
+#define W83781D_REG_BEEP_INTS2 0x57
+#define W83781D_REG_BEEP_INTS3 0x453
+
+#define W83781D_REG_VID_FANDIV 0x47
+
+#define W83781D_REG_CHIPID 0x49
+#define W83781D_REG_WCHIPID 0x58
+#define W83781D_REG_CHIPMAN 0x4F
+#define W83781D_REG_PIN 0x4B
+
+#define W83781D_REG_VBAT 0x5D
+
+#define W83627HF_REG_PWM1 0x5A
+#define W83627HF_REG_PWM2 0x5B
+
+static const u8 W83627THF_REG_PWM_ENABLE[] = {
+ 0x04, /* FAN 1 mode */
+ 0x04, /* FAN 2 mode */
+ 0x12, /* FAN AUX mode */
+};
+static const u8 W83627THF_PWM_ENABLE_SHIFT[] = { 2, 4, 1 };
+
+#define W83627THF_REG_PWM1 0x01 /* 697HF/637HF/687THF too */
+#define W83627THF_REG_PWM2 0x03 /* 697HF/637HF/687THF too */
+#define W83627THF_REG_PWM3 0x11 /* 637HF/687THF too */
+
+#define W83627THF_REG_VRM_OVT_CFG 0x18 /* 637HF/687THF too */
+
+static const u8 regpwm_627hf[] = { W83627HF_REG_PWM1, W83627HF_REG_PWM2 };
+static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2,
+ W83627THF_REG_PWM3 };
+#define W836X7HF_REG_PWM(type, nr) (((type) == w83627hf) ? \
+ regpwm_627hf[nr] : regpwm[nr])
+
+#define W83627HF_REG_PWM_FREQ 0x5C /* Only for the 627HF */
+
+#define W83637HF_REG_PWM_FREQ1 0x00 /* 697HF/687THF too */
+#define W83637HF_REG_PWM_FREQ2 0x02 /* 697HF/687THF too */
+#define W83637HF_REG_PWM_FREQ3 0x10 /* 687THF too */
+
+static const u8 W83637HF_REG_PWM_FREQ[] = { W83637HF_REG_PWM_FREQ1,
+ W83637HF_REG_PWM_FREQ2,
+ W83637HF_REG_PWM_FREQ3 };
+
+#define W83627HF_BASE_PWM_FREQ 46870
+
+#define W83781D_REG_I2C_ADDR 0x48
+#define W83781D_REG_I2C_SUBADDR 0x4A
+
+/* Sensor selection */
+#define W83781D_REG_SCFG1 0x5D
+static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
+#define W83781D_REG_SCFG2 0x59
+static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
+#define W83781D_DEFAULT_BETA 3435
+
+/*
+ * Conversions. Limit checking is only done on the TO_REG
+ * variants. Note that you should be a bit careful with which arguments
+ * these macros are called: arguments may be evaluated more than once.
+ * Fixing this is just not worth it.
+ */
+#define IN_TO_REG(val) (clamp_val((((val) + 8) / 16), 0, 255))
+#define IN_FROM_REG(val) ((val) * 16)
+
+static inline u8 FAN_TO_REG(long rpm, int div)
+{
+ if (rpm == 0)
+ return 255;
+ rpm = clamp_val(rpm, 1, 1000000);
+ return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+}
+
+#define TEMP_MIN (-128000)
+#define TEMP_MAX ( 127000)
+
+/*
+ * TEMP: 0.001C/bit (-128C to +127C)
+ * REG: 1C/bit, two's complement
+ */
+static u8 TEMP_TO_REG(long temp)
+{
+ int ntemp = clamp_val(temp, TEMP_MIN, TEMP_MAX);
+ ntemp += (ntemp < 0 ? -500 : 500);
+ return (u8)(ntemp / 1000);
+}
+
+static int TEMP_FROM_REG(u8 reg)
+{
+ return (s8)reg * 1000;
+}
+
+#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div)))
+
+#define PWM_TO_REG(val) (clamp_val((val), 0, 255))
+
+static inline unsigned long pwm_freq_from_reg_627hf(u8 reg)
+{
+ unsigned long freq;
+ freq = W83627HF_BASE_PWM_FREQ >> reg;
+ return freq;
+}
+static inline u8 pwm_freq_to_reg_627hf(unsigned long val)
+{
+ u8 i;
+ /*
+ * Only 5 dividers (1 2 4 8 16)
+ * Search for the nearest available frequency
+ */
+ for (i = 0; i < 4; i++) {
+ if (val > (((W83627HF_BASE_PWM_FREQ >> i) +
+ (W83627HF_BASE_PWM_FREQ >> (i+1))) / 2))
+ break;
+ }
+ return i;
+}
+
+static inline unsigned long pwm_freq_from_reg(u8 reg)
+{
+ /* Clock bit 8 -> 180 kHz or 24 MHz */
+ unsigned long clock = (reg & 0x80) ? 180000UL : 24000000UL;
+
+ reg &= 0x7f;
+ /* This should not happen but anyway... */
+ if (reg == 0)
+ reg++;
+ return clock / (reg << 8);
+}
+static inline u8 pwm_freq_to_reg(unsigned long val)
+{
+ /* Minimum divider value is 0x01 and maximum is 0x7F */
+ if (val >= 93750) /* The highest we can do */
+ return 0x01;
+ if (val >= 720) /* Use 24 MHz clock */
+ return 24000000UL / (val << 8);
+ if (val < 6) /* The lowest we can do */
+ return 0xFF;
+ else /* Use 180 kHz clock */
+ return 0x80 | (180000UL / (val << 8));
+}
+
+#define BEEP_MASK_FROM_REG(val) ((val) & 0xff7fff)
+#define BEEP_MASK_TO_REG(val) ((val) & 0xff7fff)
+
+#define DIV_FROM_REG(val) (1 << (val))
+
+static inline u8 DIV_TO_REG(long val)
+{
+ int i;
+ val = clamp_val(val, 1, 128) >> 1;
+ for (i = 0; i < 7; i++) {
+ if (val == 0)
+ break;
+ val >>= 1;
+ }
+ return (u8)i;
+}
+
+/*
+ * For each registered chip, we need to keep some data in memory.
+ * The structure is dynamically allocated.
+ */
+struct w83627hf_data {
+ unsigned short addr;
+ const char *name;
+ struct device *hwmon_dev;
+ struct mutex lock;
+ enum chips type;
+
+ struct mutex update_lock;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+
+ u8 in[9]; /* Register value */
+ u8 in_max[9]; /* Register value */
+ u8 in_min[9]; /* Register value */
+ u8 fan[3]; /* Register value */
+ u8 fan_min[3]; /* Register value */
+ u16 temp[3]; /* Register value */
+ u16 temp_max[3]; /* Register value */
+ u16 temp_max_hyst[3]; /* Register value */
+ u8 fan_div[3]; /* Register encoding, shifted right */
+ u8 vid; /* Register encoding, combined */
+ u32 alarms; /* Register encoding, combined */
+ u32 beep_mask; /* Register encoding, combined */
+ u8 pwm[3]; /* Register value */
+ u8 pwm_enable[3]; /* 1 = manual
+ * 2 = thermal cruise (also called SmartFan I)
+ * 3 = fan speed cruise
+ */
+ u8 pwm_freq[3]; /* Register value */
+ u16 sens[3]; /* 1 = pentium diode; 2 = 3904 diode;
+ * 4 = thermistor
+ */
+ u8 vrm;
+ u8 vrm_ovt; /* Register value, 627THF/637HF/687THF only */
+
+#ifdef CONFIG_PM
+ /* Remember extra register values over suspend/resume */
+ u8 scfg1;
+ u8 scfg2;
+#endif
+};
+
+static int w83627hf_probe(struct platform_device *pdev);
+static int w83627hf_remove(struct platform_device *pdev);
+
+static int w83627hf_read_value(struct w83627hf_data *data, u16 reg);
+static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value);
+static void w83627hf_update_fan_div(struct w83627hf_data *data);
+static struct w83627hf_data *w83627hf_update_device(struct device *dev);
+static void w83627hf_init_device(struct platform_device *pdev);
+
+#ifdef CONFIG_PM
+static int w83627hf_suspend(struct device *dev)
+{
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+
+ mutex_lock(&data->update_lock);
+ data->scfg1 = w83627hf_read_value(data, W83781D_REG_SCFG1);
+ data->scfg2 = w83627hf_read_value(data, W83781D_REG_SCFG2);
+ mutex_unlock(&data->update_lock);
+
+ return 0;
+}
+
+static int w83627hf_resume(struct device *dev)
+{
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ int i, num_temps = (data->type == w83697hf) ? 2 : 3;
+
+ /* Restore limits */
+ mutex_lock(&data->update_lock);
+ for (i = 0; i <= 8; i++) {
+ /* skip missing sensors */
+ if (((data->type == w83697hf) && (i == 1)) ||
+ ((data->type != w83627hf && data->type != w83697hf)
+ && (i == 5 || i == 6)))
+ continue;
+ w83627hf_write_value(data, W83781D_REG_IN_MAX(i),
+ data->in_max[i]);
+ w83627hf_write_value(data, W83781D_REG_IN_MIN(i),
+ data->in_min[i]);
+ }
+ for (i = 0; i <= 2; i++)
+ w83627hf_write_value(data, W83627HF_REG_FAN_MIN(i),
+ data->fan_min[i]);
+ for (i = 0; i < num_temps; i++) {
+ w83627hf_write_value(data, w83627hf_reg_temp_over[i],
+ data->temp_max[i]);
+ w83627hf_write_value(data, w83627hf_reg_temp_hyst[i],
+ data->temp_max_hyst[i]);
+ }
+
+ /* Fixup BIOS bugs */
+ if (data->type == w83627thf || data->type == w83637hf ||
+ data->type == w83687thf)
+ w83627hf_write_value(data, W83627THF_REG_VRM_OVT_CFG,
+ data->vrm_ovt);
+ w83627hf_write_value(data, W83781D_REG_SCFG1, data->scfg1);
+ w83627hf_write_value(data, W83781D_REG_SCFG2, data->scfg2);
+
+ /* Force re-reading all values */
+ data->valid = 0;
+ mutex_unlock(&data->update_lock);
+
+ return 0;
+}
+
+static const struct dev_pm_ops w83627hf_dev_pm_ops = {
+ .suspend = w83627hf_suspend,
+ .resume = w83627hf_resume,
+};
+
+#define W83627HF_DEV_PM_OPS (&w83627hf_dev_pm_ops)
+#else
+#define W83627HF_DEV_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver w83627hf_driver = {
+ .driver = {
+ .name = DRVNAME,
+ .pm = W83627HF_DEV_PM_OPS,
+ },
+ .probe = w83627hf_probe,
+ .remove = w83627hf_remove,
+};
+
+static ssize_t
+in_input_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in[nr]));
+}
+static ssize_t
+in_min_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in_min[nr]));
+}
+static ssize_t
+in_max_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n", (long)IN_FROM_REG(data->in_max[nr]));
+}
+static ssize_t
+in_min_store(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+ data->in_min[nr] = IN_TO_REG(val);
+ w83627hf_write_value(data, W83781D_REG_IN_MIN(nr), data->in_min[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+static ssize_t
+in_max_store(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+ data->in_max[nr] = IN_TO_REG(val);
+ w83627hf_write_value(data, W83781D_REG_IN_MAX(nr), data->in_max[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR_RO(in1_input, in_input, 1);
+static SENSOR_DEVICE_ATTR_RW(in1_min, in_min, 1);
+static SENSOR_DEVICE_ATTR_RW(in1_max, in_max, 1);
+static SENSOR_DEVICE_ATTR_RO(in2_input, in_input, 2);
+static SENSOR_DEVICE_ATTR_RW(in2_min, in_min, 2);
+static SENSOR_DEVICE_ATTR_RW(in2_max, in_max, 2);
+static SENSOR_DEVICE_ATTR_RO(in3_input, in_input, 3);
+static SENSOR_DEVICE_ATTR_RW(in3_min, in_min, 3);
+static SENSOR_DEVICE_ATTR_RW(in3_max, in_max, 3);
+static SENSOR_DEVICE_ATTR_RO(in4_input, in_input, 4);
+static SENSOR_DEVICE_ATTR_RW(in4_min, in_min, 4);
+static SENSOR_DEVICE_ATTR_RW(in4_max, in_max, 4);
+static SENSOR_DEVICE_ATTR_RO(in5_input, in_input, 5);
+static SENSOR_DEVICE_ATTR_RW(in5_min, in_min, 5);
+static SENSOR_DEVICE_ATTR_RW(in5_max, in_max, 5);
+static SENSOR_DEVICE_ATTR_RO(in6_input, in_input, 6);
+static SENSOR_DEVICE_ATTR_RW(in6_min, in_min, 6);
+static SENSOR_DEVICE_ATTR_RW(in6_max, in_max, 6);
+static SENSOR_DEVICE_ATTR_RO(in7_input, in_input, 7);
+static SENSOR_DEVICE_ATTR_RW(in7_min, in_min, 7);
+static SENSOR_DEVICE_ATTR_RW(in7_max, in_max, 7);
+static SENSOR_DEVICE_ATTR_RO(in8_input, in_input, 8);
+static SENSOR_DEVICE_ATTR_RW(in8_min, in_min, 8);
+static SENSOR_DEVICE_ATTR_RW(in8_max, in_max, 8);
+
+/* use a different set of functions for in0 */
+static ssize_t show_in_0(struct w83627hf_data *data, char *buf, u8 reg)
+{
+ long in0;
+
+ if ((data->vrm_ovt & 0x01) &&
+ (w83627thf == data->type || w83637hf == data->type
+ || w83687thf == data->type))
+
+ /* use VRM9 calculation */
+ in0 = (long)((reg * 488 + 70000 + 50) / 100);
+ else
+ /* use VRM8 (standard) calculation */
+ in0 = (long)IN_FROM_REG(reg);
+
+ return sprintf(buf,"%ld\n", in0);
+}
+
+static ssize_t in0_input_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return show_in_0(data, buf, data->in[0]);
+}
+
+static ssize_t in0_min_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return show_in_0(data, buf, data->in_min[0]);
+}
+
+static ssize_t in0_max_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return show_in_0(data, buf, data->in_max[0]);
+}
+
+static ssize_t in0_min_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+
+ if ((data->vrm_ovt & 0x01) &&
+ (w83627thf == data->type || w83637hf == data->type
+ || w83687thf == data->type))
+
+ /* use VRM9 calculation */
+ data->in_min[0] =
+ clamp_val(((val * 100) - 70000 + 244) / 488, 0, 255);
+ else
+ /* use VRM8 (standard) calculation */
+ data->in_min[0] = IN_TO_REG(val);
+
+ w83627hf_write_value(data, W83781D_REG_IN_MIN(0), data->in_min[0]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t in0_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+
+ if ((data->vrm_ovt & 0x01) &&
+ (w83627thf == data->type || w83637hf == data->type
+ || w83687thf == data->type))
+
+ /* use VRM9 calculation */
+ data->in_max[0] =
+ clamp_val(((val * 100) - 70000 + 244) / 488, 0, 255);
+ else
+ /* use VRM8 (standard) calculation */
+ data->in_max[0] = IN_TO_REG(val);
+
+ w83627hf_write_value(data, W83781D_REG_IN_MAX(0), data->in_max[0]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static DEVICE_ATTR_RO(in0_input);
+static DEVICE_ATTR_RW(in0_min);
+static DEVICE_ATTR_RW(in0_max);
+
+static ssize_t
+fan_input_show(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n", FAN_FROM_REG(data->fan[nr],
+ (long)DIV_FROM_REG(data->fan_div[nr])));
+}
+static ssize_t
+fan_min_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n", FAN_FROM_REG(data->fan_min[nr],
+ (long)DIV_FROM_REG(data->fan_div[nr])));
+}
+static ssize_t
+fan_min_store(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+ data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
+ w83627hf_write_value(data, W83627HF_REG_FAN_MIN(nr),
+ data->fan_min[nr]);
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR_RO(fan1_input, fan_input, 0);
+static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0);
+static SENSOR_DEVICE_ATTR_RO(fan2_input, fan_input, 1);
+static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1);
+static SENSOR_DEVICE_ATTR_RO(fan3_input, fan_input, 2);
+static SENSOR_DEVICE_ATTR_RW(fan3_min, fan_min, 2);
+
+static ssize_t
+temp_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+
+ u16 tmp = data->temp[nr];
+ return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp)
+ : (long) TEMP_FROM_REG(tmp));
+}
+
+static ssize_t
+temp_max_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+
+ u16 tmp = data->temp_max[nr];
+ return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp)
+ : (long) TEMP_FROM_REG(tmp));
+}
+
+static ssize_t
+temp_max_hyst_show(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+
+ u16 tmp = data->temp_max_hyst[nr];
+ return sprintf(buf, "%ld\n", (nr) ? (long) LM75_TEMP_FROM_REG(tmp)
+ : (long) TEMP_FROM_REG(tmp));
+}
+
+static ssize_t
+temp_max_store(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ u16 tmp;
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
+
+ tmp = (nr) ? LM75_TEMP_TO_REG(val) : TEMP_TO_REG(val);
+ mutex_lock(&data->update_lock);
+ data->temp_max[nr] = tmp;
+ w83627hf_write_value(data, w83627hf_reg_temp_over[nr], tmp);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static ssize_t
+temp_max_hyst_store(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ u16 tmp;
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err)
+ return err;
+
+ tmp = (nr) ? LM75_TEMP_TO_REG(val) : TEMP_TO_REG(val);
+ mutex_lock(&data->update_lock);
+ data->temp_max_hyst[nr] = tmp;
+ w83627hf_write_value(data, w83627hf_reg_temp_hyst[nr], tmp);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0);
+static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0);
+static SENSOR_DEVICE_ATTR_RW(temp1_max_hyst, temp_max_hyst, 0);
+static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1);
+static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1);
+static SENSOR_DEVICE_ATTR_RW(temp2_max_hyst, temp_max_hyst, 1);
+static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2);
+static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_max, 2);
+static SENSOR_DEVICE_ATTR_RW(temp3_max_hyst, temp_max_hyst, 2);
+
+static ssize_t
+cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
+}
+static DEVICE_ATTR_RO(cpu0_vid);
+
+static ssize_t
+vrm_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%ld\n", (long) data->vrm);
+}
+static ssize_t
+vrm_store(struct device *dev, struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ if (val > 255)
+ return -EINVAL;
+ data->vrm = val;
+
+ return count;
+}
+static DEVICE_ATTR_RW(vrm);
+
+static ssize_t
+alarms_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n", (long) data->alarms);
+}
+static DEVICE_ATTR_RO(alarms);
+
+static ssize_t
+alarm_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ int bitnr = to_sensor_dev_attr(attr)->index;
+ return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
+}
+static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0);
+static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 1);
+static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 2);
+static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3);
+static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm, 8);
+static SENSOR_DEVICE_ATTR_RO(in5_alarm, alarm, 9);
+static SENSOR_DEVICE_ATTR_RO(in6_alarm, alarm, 10);
+static SENSOR_DEVICE_ATTR_RO(in7_alarm, alarm, 16);
+static SENSOR_DEVICE_ATTR_RO(in8_alarm, alarm, 17);
+static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 6);
+static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 7);
+static SENSOR_DEVICE_ATTR_RO(fan3_alarm, alarm, 11);
+static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 4);
+static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, 5);
+static SENSOR_DEVICE_ATTR_RO(temp3_alarm, alarm, 13);
+
+static ssize_t
+beep_mask_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n",
+ (long)BEEP_MASK_FROM_REG(data->beep_mask));
+}
+
+static ssize_t
+beep_mask_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+
+ /* preserve beep enable */
+ data->beep_mask = (data->beep_mask & 0x8000)
+ | BEEP_MASK_TO_REG(val);
+ w83627hf_write_value(data, W83781D_REG_BEEP_INTS1,
+ data->beep_mask & 0xff);
+ w83627hf_write_value(data, W83781D_REG_BEEP_INTS3,
+ ((data->beep_mask) >> 16) & 0xff);
+ w83627hf_write_value(data, W83781D_REG_BEEP_INTS2,
+ (data->beep_mask >> 8) & 0xff);
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static DEVICE_ATTR_RW(beep_mask);
+
+static ssize_t
+beep_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ int bitnr = to_sensor_dev_attr(attr)->index;
+ return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
+}
+
+static ssize_t
+beep_store(struct device *dev, struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ int bitnr = to_sensor_dev_attr(attr)->index;
+ u8 reg;
+ unsigned long bit;
+ int err;
+
+ err = kstrtoul(buf, 10, &bit);
+ if (err)
+ return err;
+
+ if (bit & ~1)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ if (bit)
+ data->beep_mask |= (1 << bitnr);
+ else
+ data->beep_mask &= ~(1 << bitnr);
+
+ if (bitnr < 8) {
+ reg = w83627hf_read_value(data, W83781D_REG_BEEP_INTS1);
+ if (bit)
+ reg |= (1 << bitnr);
+ else
+ reg &= ~(1 << bitnr);
+ w83627hf_write_value(data, W83781D_REG_BEEP_INTS1, reg);
+ } else if (bitnr < 16) {
+ reg = w83627hf_read_value(data, W83781D_REG_BEEP_INTS2);
+ if (bit)
+ reg |= (1 << (bitnr - 8));
+ else
+ reg &= ~(1 << (bitnr - 8));
+ w83627hf_write_value(data, W83781D_REG_BEEP_INTS2, reg);
+ } else {
+ reg = w83627hf_read_value(data, W83781D_REG_BEEP_INTS3);
+ if (bit)
+ reg |= (1 << (bitnr - 16));
+ else
+ reg &= ~(1 << (bitnr - 16));
+ w83627hf_write_value(data, W83781D_REG_BEEP_INTS3, reg);
+ }
+ mutex_unlock(&data->update_lock);
+
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR_RW(in0_beep, beep, 0);
+static SENSOR_DEVICE_ATTR_RW(in1_beep, beep, 1);
+static SENSOR_DEVICE_ATTR_RW(in2_beep, beep, 2);
+static SENSOR_DEVICE_ATTR_RW(in3_beep, beep, 3);
+static SENSOR_DEVICE_ATTR_RW(in4_beep, beep, 8);
+static SENSOR_DEVICE_ATTR_RW(in5_beep, beep, 9);
+static SENSOR_DEVICE_ATTR_RW(in6_beep, beep, 10);
+static SENSOR_DEVICE_ATTR_RW(in7_beep, beep, 16);
+static SENSOR_DEVICE_ATTR_RW(in8_beep, beep, 17);
+static SENSOR_DEVICE_ATTR_RW(fan1_beep, beep, 6);
+static SENSOR_DEVICE_ATTR_RW(fan2_beep, beep, 7);
+static SENSOR_DEVICE_ATTR_RW(fan3_beep, beep, 11);
+static SENSOR_DEVICE_ATTR_RW(temp1_beep, beep, 4);
+static SENSOR_DEVICE_ATTR_RW(temp2_beep, beep, 5);
+static SENSOR_DEVICE_ATTR_RW(temp3_beep, beep, 13);
+static SENSOR_DEVICE_ATTR_RW(beep_enable, beep, 15);
+
+static ssize_t
+fan_div_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n",
+ (long) DIV_FROM_REG(data->fan_div[nr]));
+}
+/*
+ * Note: we save and restore the fan minimum here, because its value is
+ * determined in part by the fan divisor. This follows the principle of
+ * least surprise; the user doesn't expect the fan minimum to change just
+ * because the divisor changed.
+ */
+static ssize_t
+fan_div_store(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ unsigned long min;
+ u8 reg;
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+
+ /* Save fan_min */
+ min = FAN_FROM_REG(data->fan_min[nr],
+ DIV_FROM_REG(data->fan_div[nr]));
+
+ data->fan_div[nr] = DIV_TO_REG(val);
+
+ reg = (w83627hf_read_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
+ & (nr==0 ? 0xcf : 0x3f))
+ | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6));
+ w83627hf_write_value(data, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
+
+ reg = (w83627hf_read_value(data, W83781D_REG_VBAT)
+ & ~(1 << (5 + nr)))
+ | ((data->fan_div[nr] & 0x04) << (3 + nr));
+ w83627hf_write_value(data, W83781D_REG_VBAT, reg);
+
+ /* Restore fan_min */
+ data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+ w83627hf_write_value(data, W83627HF_REG_FAN_MIN(nr), data->fan_min[nr]);
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0);
+static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1);
+static SENSOR_DEVICE_ATTR_RW(fan3_div, fan_div, 2);
+
+static ssize_t
+pwm_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n", (long) data->pwm[nr]);
+}
+
+static ssize_t
+pwm_store(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+
+ if (data->type == w83627thf) {
+ /* bits 0-3 are reserved in 627THF */
+ data->pwm[nr] = PWM_TO_REG(val) & 0xf0;
+ w83627hf_write_value(data,
+ W836X7HF_REG_PWM(data->type, nr),
+ data->pwm[nr] |
+ (w83627hf_read_value(data,
+ W836X7HF_REG_PWM(data->type, nr)) & 0x0f));
+ } else {
+ data->pwm[nr] = PWM_TO_REG(val);
+ w83627hf_write_value(data,
+ W836X7HF_REG_PWM(data->type, nr),
+ data->pwm[nr]);
+ }
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0);
+static SENSOR_DEVICE_ATTR_RW(pwm2, pwm, 1);
+static SENSOR_DEVICE_ATTR_RW(pwm3, pwm, 2);
+
+static ssize_t
+pwm_enable_show(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%d\n", data->pwm_enable[nr]);
+}
+
+static ssize_t
+pwm_enable_store(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ u8 reg;
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ if (!val || val > 3) /* modes 1, 2 and 3 are supported */
+ return -EINVAL;
+ mutex_lock(&data->update_lock);
+ data->pwm_enable[nr] = val;
+ reg = w83627hf_read_value(data, W83627THF_REG_PWM_ENABLE[nr]);
+ reg &= ~(0x03 << W83627THF_PWM_ENABLE_SHIFT[nr]);
+ reg |= (val - 1) << W83627THF_PWM_ENABLE_SHIFT[nr];
+ w83627hf_write_value(data, W83627THF_REG_PWM_ENABLE[nr], reg);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR_RW(pwm1_enable, pwm_enable, 0);
+static SENSOR_DEVICE_ATTR_RW(pwm2_enable, pwm_enable, 1);
+static SENSOR_DEVICE_ATTR_RW(pwm3_enable, pwm_enable, 2);
+
+static ssize_t
+pwm_freq_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ if (data->type == w83627hf)
+ return sprintf(buf, "%ld\n",
+ pwm_freq_from_reg_627hf(data->pwm_freq[nr]));
+ else
+ return sprintf(buf, "%ld\n",
+ pwm_freq_from_reg(data->pwm_freq[nr]));
+}
+
+static ssize_t
+pwm_freq_store(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ static const u8 mask[]={0xF8, 0x8F};
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+
+ if (data->type == w83627hf) {
+ data->pwm_freq[nr] = pwm_freq_to_reg_627hf(val);
+ w83627hf_write_value(data, W83627HF_REG_PWM_FREQ,
+ (data->pwm_freq[nr] << (nr*4)) |
+ (w83627hf_read_value(data,
+ W83627HF_REG_PWM_FREQ) & mask[nr]));
+ } else {
+ data->pwm_freq[nr] = pwm_freq_to_reg(val);
+ w83627hf_write_value(data, W83637HF_REG_PWM_FREQ[nr],
+ data->pwm_freq[nr]);
+ }
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR_RW(pwm1_freq, pwm_freq, 0);
+static SENSOR_DEVICE_ATTR_RW(pwm2_freq, pwm_freq, 1);
+static SENSOR_DEVICE_ATTR_RW(pwm3_freq, pwm_freq, 2);
+
+static ssize_t
+temp_type_show(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = w83627hf_update_device(dev);
+ return sprintf(buf, "%ld\n", (long) data->sens[nr]);
+}
+
+static ssize_t
+temp_type_store(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int nr = to_sensor_dev_attr(devattr)->index;
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ u32 tmp;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err)
+ return err;
+
+ mutex_lock(&data->update_lock);
+
+ switch (val) {
+ case 1: /* PII/Celeron diode */
+ tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
+ w83627hf_write_value(data, W83781D_REG_SCFG1,
+ tmp | BIT_SCFG1[nr]);
+ tmp = w83627hf_read_value(data, W83781D_REG_SCFG2);
+ w83627hf_write_value(data, W83781D_REG_SCFG2,
+ tmp | BIT_SCFG2[nr]);
+ data->sens[nr] = val;
+ break;
+ case 2: /* 3904 */
+ tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
+ w83627hf_write_value(data, W83781D_REG_SCFG1,
+ tmp | BIT_SCFG1[nr]);
+ tmp = w83627hf_read_value(data, W83781D_REG_SCFG2);
+ w83627hf_write_value(data, W83781D_REG_SCFG2,
+ tmp & ~BIT_SCFG2[nr]);
+ data->sens[nr] = val;
+ break;
+ case W83781D_DEFAULT_BETA:
+ dev_warn(dev, "Sensor type %d is deprecated, please use 4 "
+ "instead\n", W83781D_DEFAULT_BETA);
+ fallthrough;
+ case 4: /* thermistor */
+ tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
+ w83627hf_write_value(data, W83781D_REG_SCFG1,
+ tmp & ~BIT_SCFG1[nr]);
+ data->sens[nr] = val;
+ break;
+ default:
+ dev_err(dev,
+ "Invalid sensor type %ld; must be 1, 2, or 4\n",
+ (long) val);
+ break;
+ }
+
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+
+static SENSOR_DEVICE_ATTR_RW(temp1_type, temp_type, 0);
+static SENSOR_DEVICE_ATTR_RW(temp2_type, temp_type, 1);
+static SENSOR_DEVICE_ATTR_RW(temp3_type, temp_type, 2);
+
+static ssize_t
+name_show(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR_RO(name);
+
+static int __init w83627hf_find(int sioaddr, unsigned short *addr,
+ struct w83627hf_sio_data *sio_data)
+{
+ int err;
+ u16 val;
+
+ static __initconst char *const names[] = {
+ "W83627HF",
+ "W83627THF",
+ "W83697HF",
+ "W83637HF",
+ "W83687THF",
+ };
+
+ sio_data->sioaddr = sioaddr;
+ err = superio_enter(sio_data);
+ if (err)
+ return err;
+
+ err = -ENODEV;
+ val = force_id ? force_id : superio_inb(sio_data, DEVID);
+ switch (val) {
+ case W627_DEVID:
+ sio_data->type = w83627hf;
+ break;
+ case W627THF_DEVID:
+ sio_data->type = w83627thf;
+ break;
+ case W697_DEVID:
+ sio_data->type = w83697hf;
+ break;
+ case W637_DEVID:
+ sio_data->type = w83637hf;
+ break;
+ case W687THF_DEVID:
+ sio_data->type = w83687thf;
+ break;
+ case 0xff: /* No device at all */
+ goto exit;
+ default:
+ pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%02x)\n", val);
+ goto exit;
+ }
+
+ superio_select(sio_data, W83627HF_LD_HWM);
+ val = (superio_inb(sio_data, WINB_BASE_REG) << 8) |
+ superio_inb(sio_data, WINB_BASE_REG + 1);
+ *addr = val & WINB_ALIGNMENT;
+ if (*addr == 0) {
+ pr_warn("Base address not set, skipping\n");
+ goto exit;
+ }
+
+ val = superio_inb(sio_data, WINB_ACT_REG);
+ if (!(val & 0x01)) {
+ pr_warn("Enabling HWM logical device\n");
+ superio_outb(sio_data, WINB_ACT_REG, val | 0x01);
+ }
+
+ err = 0;
+ pr_info(DRVNAME ": Found %s chip at %#x\n",
+ names[sio_data->type], *addr);
+
+ exit:
+ superio_exit(sio_data);
+ return err;
+}
+
+#define VIN_UNIT_ATTRS(_X_) \
+ &sensor_dev_attr_in##_X_##_input.dev_attr.attr, \
+ &sensor_dev_attr_in##_X_##_min.dev_attr.attr, \
+ &sensor_dev_attr_in##_X_##_max.dev_attr.attr, \
+ &sensor_dev_attr_in##_X_##_alarm.dev_attr.attr, \
+ &sensor_dev_attr_in##_X_##_beep.dev_attr.attr
+
+#define FAN_UNIT_ATTRS(_X_) \
+ &sensor_dev_attr_fan##_X_##_input.dev_attr.attr, \
+ &sensor_dev_attr_fan##_X_##_min.dev_attr.attr, \
+ &sensor_dev_attr_fan##_X_##_div.dev_attr.attr, \
+ &sensor_dev_attr_fan##_X_##_alarm.dev_attr.attr, \
+ &sensor_dev_attr_fan##_X_##_beep.dev_attr.attr
+
+#define TEMP_UNIT_ATTRS(_X_) \
+ &sensor_dev_attr_temp##_X_##_input.dev_attr.attr, \
+ &sensor_dev_attr_temp##_X_##_max.dev_attr.attr, \
+ &sensor_dev_attr_temp##_X_##_max_hyst.dev_attr.attr, \
+ &sensor_dev_attr_temp##_X_##_type.dev_attr.attr, \
+ &sensor_dev_attr_temp##_X_##_alarm.dev_attr.attr, \
+ &sensor_dev_attr_temp##_X_##_beep.dev_attr.attr
+
+static struct attribute *w83627hf_attributes[] = {
+ &dev_attr_in0_input.attr,
+ &dev_attr_in0_min.attr,
+ &dev_attr_in0_max.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
+ &sensor_dev_attr_in0_beep.dev_attr.attr,
+ VIN_UNIT_ATTRS(2),
+ VIN_UNIT_ATTRS(3),
+ VIN_UNIT_ATTRS(4),
+ VIN_UNIT_ATTRS(7),
+ VIN_UNIT_ATTRS(8),
+
+ FAN_UNIT_ATTRS(1),
+ FAN_UNIT_ATTRS(2),
+
+ TEMP_UNIT_ATTRS(1),
+ TEMP_UNIT_ATTRS(2),
+
+ &dev_attr_alarms.attr,
+ &sensor_dev_attr_beep_enable.dev_attr.attr,
+ &dev_attr_beep_mask.attr,
+
+ &sensor_dev_attr_pwm1.dev_attr.attr,
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ &dev_attr_name.attr,
+ NULL
+};
+
+static const struct attribute_group w83627hf_group = {
+ .attrs = w83627hf_attributes,
+};
+
+static struct attribute *w83627hf_attributes_opt[] = {
+ VIN_UNIT_ATTRS(1),
+ VIN_UNIT_ATTRS(5),
+ VIN_UNIT_ATTRS(6),
+
+ FAN_UNIT_ATTRS(3),
+ TEMP_UNIT_ATTRS(3),
+ &sensor_dev_attr_pwm3.dev_attr.attr,
+
+ &sensor_dev_attr_pwm1_freq.dev_attr.attr,
+ &sensor_dev_attr_pwm2_freq.dev_attr.attr,
+ &sensor_dev_attr_pwm3_freq.dev_attr.attr,
+
+ &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm3_enable.dev_attr.attr,
+
+ NULL
+};
+
+static const struct attribute_group w83627hf_group_opt = {
+ .attrs = w83627hf_attributes_opt,
+};
+
+static int w83627hf_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct w83627hf_sio_data *sio_data = dev_get_platdata(dev);
+ struct w83627hf_data *data;
+ struct resource *res;
+ int err, i;
+
+ static const char *names[] = {
+ "w83627hf",
+ "w83627thf",
+ "w83697hf",
+ "w83637hf",
+ "w83687thf",
+ };
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!devm_request_region(dev, res->start, WINB_REGION_SIZE, DRVNAME)) {
+ dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
+ (unsigned long)res->start,
+ (unsigned long)(res->start + WINB_REGION_SIZE - 1));
+ return -EBUSY;
+ }
+
+ data = devm_kzalloc(dev, sizeof(struct w83627hf_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->addr = res->start;
+ data->type = sio_data->type;
+ data->name = names[sio_data->type];
+ mutex_init(&data->lock);
+ mutex_init(&data->update_lock);
+ platform_set_drvdata(pdev, data);
+
+ /* Initialize the chip */
+ w83627hf_init_device(pdev);
+
+ /* A few vars need to be filled upon startup */
+ for (i = 0; i <= 2; i++)
+ data->fan_min[i] = w83627hf_read_value(
+ data, W83627HF_REG_FAN_MIN(i));
+ w83627hf_update_fan_div(data);
+
+ /* Register common device attributes */
+ err = sysfs_create_group(&dev->kobj, &w83627hf_group);
+ if (err)
+ return err;
+
+ /* Register chip-specific device attributes */
+ if (data->type == w83627hf || data->type == w83697hf)
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_in5_input.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in5_min.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in5_max.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in5_alarm.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in5_beep.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in6_input.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in6_min.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in6_max.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in6_alarm.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in6_beep.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm1_freq.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm2_freq.dev_attr)))
+ goto error;
+
+ if (data->type != w83697hf)
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_in1_input.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in1_min.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in1_max.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in1_alarm.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_in1_beep.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan3_input.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan3_min.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan3_div.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan3_alarm.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan3_beep.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_temp3_input.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_temp3_max.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_temp3_max_hyst.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_temp3_alarm.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_temp3_beep.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_temp3_type.dev_attr)))
+ goto error;
+
+ if (data->type != w83697hf && data->vid != 0xff) {
+ /* Convert VID to voltage based on VRM */
+ data->vrm = vid_which_vrm();
+
+ if ((err = device_create_file(dev, &dev_attr_cpu0_vid))
+ || (err = device_create_file(dev, &dev_attr_vrm)))
+ goto error;
+ }
+
+ if (data->type == w83627thf || data->type == w83637hf
+ || data->type == w83687thf) {
+ err = device_create_file(dev, &sensor_dev_attr_pwm3.dev_attr);
+ if (err)
+ goto error;
+ }
+
+ if (data->type == w83637hf || data->type == w83687thf)
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_pwm1_freq.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm2_freq.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm3_freq.dev_attr)))
+ goto error;
+
+ if (data->type != w83627hf)
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_pwm1_enable.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm2_enable.dev_attr)))
+ goto error;
+
+ if (data->type == w83627thf || data->type == w83637hf
+ || data->type == w83687thf) {
+ err = device_create_file(dev,
+ &sensor_dev_attr_pwm3_enable.dev_attr);
+ if (err)
+ goto error;
+ }
+
+ data->hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ goto error;
+ }
+
+ return 0;
+
+ error:
+ sysfs_remove_group(&dev->kobj, &w83627hf_group);
+ sysfs_remove_group(&dev->kobj, &w83627hf_group_opt);
+ return err;
+}
+
+static int w83627hf_remove(struct platform_device *pdev)
+{
+ struct w83627hf_data *data = platform_get_drvdata(pdev);
+
+ hwmon_device_unregister(data->hwmon_dev);
+
+ sysfs_remove_group(&pdev->dev.kobj, &w83627hf_group);
+ sysfs_remove_group(&pdev->dev.kobj, &w83627hf_group_opt);
+
+ return 0;
+}
+
+/* Registers 0x50-0x5f are banked */
+static inline void w83627hf_set_bank(struct w83627hf_data *data, u16 reg)
+{
+ if ((reg & 0x00f0) == 0x50) {
+ outb_p(W83781D_REG_BANK, data->addr + W83781D_ADDR_REG_OFFSET);
+ outb_p(reg >> 8, data->addr + W83781D_DATA_REG_OFFSET);
+ }
+}
+
+/* Not strictly necessary, but play it safe for now */
+static inline void w83627hf_reset_bank(struct w83627hf_data *data, u16 reg)
+{
+ if (reg & 0xff00) {
+ outb_p(W83781D_REG_BANK, data->addr + W83781D_ADDR_REG_OFFSET);
+ outb_p(0, data->addr + W83781D_DATA_REG_OFFSET);
+ }
+}
+
+static int w83627hf_read_value(struct w83627hf_data *data, u16 reg)
+{
+ int res, word_sized;
+
+ mutex_lock(&data->lock);
+ word_sized = (((reg & 0xff00) == 0x100)
+ || ((reg & 0xff00) == 0x200))
+ && (((reg & 0x00ff) == 0x50)
+ || ((reg & 0x00ff) == 0x53)
+ || ((reg & 0x00ff) == 0x55));
+ w83627hf_set_bank(data, reg);
+ outb_p(reg & 0xff, data->addr + W83781D_ADDR_REG_OFFSET);
+ res = inb_p(data->addr + W83781D_DATA_REG_OFFSET);
+ if (word_sized) {
+ outb_p((reg & 0xff) + 1,
+ data->addr + W83781D_ADDR_REG_OFFSET);
+ res =
+ (res << 8) + inb_p(data->addr +
+ W83781D_DATA_REG_OFFSET);
+ }
+ w83627hf_reset_bank(data, reg);
+ mutex_unlock(&data->lock);
+ return res;
+}
+
+static int w83627thf_read_gpio5(struct platform_device *pdev)
+{
+ struct w83627hf_sio_data *sio_data = dev_get_platdata(&pdev->dev);
+ int res = 0xff, sel;
+
+ if (superio_enter(sio_data)) {
+ /*
+ * Some other driver reserved the address space for itself.
+ * We don't want to fail driver instantiation because of that,
+ * so display a warning and keep going.
+ */
+ dev_warn(&pdev->dev,
+ "Can not read VID data: Failed to enable SuperIO access\n");
+ return res;
+ }
+
+ superio_select(sio_data, W83627HF_LD_GPIO5);
+
+ res = 0xff;
+
+ /* Make sure these GPIO pins are enabled */
+ if (!(superio_inb(sio_data, W83627THF_GPIO5_EN) & (1<<3))) {
+ dev_dbg(&pdev->dev, "GPIO5 disabled, no VID function\n");
+ goto exit;
+ }
+
+ /*
+ * Make sure the pins are configured for input
+ * There must be at least five (VRM 9), and possibly 6 (VRM 10)
+ */
+ sel = superio_inb(sio_data, W83627THF_GPIO5_IOSR) & 0x3f;
+ if ((sel & 0x1f) != 0x1f) {
+ dev_dbg(&pdev->dev, "GPIO5 not configured for VID "
+ "function\n");
+ goto exit;
+ }
+
+ dev_info(&pdev->dev, "Reading VID from GPIO5\n");
+ res = superio_inb(sio_data, W83627THF_GPIO5_DR) & sel;
+
+exit:
+ superio_exit(sio_data);
+ return res;
+}
+
+static int w83687thf_read_vid(struct platform_device *pdev)
+{
+ struct w83627hf_sio_data *sio_data = dev_get_platdata(&pdev->dev);
+ int res = 0xff;
+
+ if (superio_enter(sio_data)) {
+ /*
+ * Some other driver reserved the address space for itself.
+ * We don't want to fail driver instantiation because of that,
+ * so display a warning and keep going.
+ */
+ dev_warn(&pdev->dev,
+ "Can not read VID data: Failed to enable SuperIO access\n");
+ return res;
+ }
+
+ superio_select(sio_data, W83627HF_LD_HWM);
+
+ /* Make sure these GPIO pins are enabled */
+ if (!(superio_inb(sio_data, W83687THF_VID_EN) & (1 << 2))) {
+ dev_dbg(&pdev->dev, "VID disabled, no VID function\n");
+ goto exit;
+ }
+
+ /* Make sure the pins are configured for input */
+ if (!(superio_inb(sio_data, W83687THF_VID_CFG) & (1 << 4))) {
+ dev_dbg(&pdev->dev, "VID configured as output, "
+ "no VID function\n");
+ goto exit;
+ }
+
+ res = superio_inb(sio_data, W83687THF_VID_DATA) & 0x3f;
+
+exit:
+ superio_exit(sio_data);
+ return res;
+}
+
+static int w83627hf_write_value(struct w83627hf_data *data, u16 reg, u16 value)
+{
+ int word_sized;
+
+ mutex_lock(&data->lock);
+ word_sized = (((reg & 0xff00) == 0x100)
+ || ((reg & 0xff00) == 0x200))
+ && (((reg & 0x00ff) == 0x53)
+ || ((reg & 0x00ff) == 0x55));
+ w83627hf_set_bank(data, reg);
+ outb_p(reg & 0xff, data->addr + W83781D_ADDR_REG_OFFSET);
+ if (word_sized) {
+ outb_p(value >> 8,
+ data->addr + W83781D_DATA_REG_OFFSET);
+ outb_p((reg & 0xff) + 1,
+ data->addr + W83781D_ADDR_REG_OFFSET);
+ }
+ outb_p(value & 0xff,
+ data->addr + W83781D_DATA_REG_OFFSET);
+ w83627hf_reset_bank(data, reg);
+ mutex_unlock(&data->lock);
+ return 0;
+}
+
+static void w83627hf_init_device(struct platform_device *pdev)
+{
+ struct w83627hf_data *data = platform_get_drvdata(pdev);
+ int i;
+ enum chips type = data->type;
+ u8 tmp;
+
+ /* Minimize conflicts with other winbond i2c-only clients... */
+ /* disable i2c subclients... how to disable main i2c client?? */
+ /* force i2c address to relatively uncommon address */
+ if (type == w83627hf) {
+ w83627hf_write_value(data, W83781D_REG_I2C_SUBADDR, 0x89);
+ w83627hf_write_value(data, W83781D_REG_I2C_ADDR, force_i2c);
+ }
+
+ /* Read VID only once */
+ if (type == w83627hf || type == w83637hf) {
+ int lo = w83627hf_read_value(data, W83781D_REG_VID_FANDIV);
+ int hi = w83627hf_read_value(data, W83781D_REG_CHIPID);
+ data->vid = (lo & 0x0f) | ((hi & 0x01) << 4);
+ } else if (type == w83627thf) {
+ data->vid = w83627thf_read_gpio5(pdev);
+ } else if (type == w83687thf) {
+ data->vid = w83687thf_read_vid(pdev);
+ }
+
+ /* Read VRM & OVT Config only once */
+ if (type == w83627thf || type == w83637hf || type == w83687thf) {
+ data->vrm_ovt =
+ w83627hf_read_value(data, W83627THF_REG_VRM_OVT_CFG);
+ }
+
+ tmp = w83627hf_read_value(data, W83781D_REG_SCFG1);
+ for (i = 1; i <= 3; i++) {
+ if (!(tmp & BIT_SCFG1[i - 1])) {
+ data->sens[i - 1] = 4;
+ } else {
+ if (w83627hf_read_value
+ (data,
+ W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
+ data->sens[i - 1] = 1;
+ else
+ data->sens[i - 1] = 2;
+ }
+ if ((type == w83697hf) && (i == 2))
+ break;
+ }
+
+ if(init) {
+ /* Enable temp2 */
+ tmp = w83627hf_read_value(data, W83627HF_REG_TEMP2_CONFIG);
+ if (tmp & 0x01) {
+ dev_warn(&pdev->dev, "Enabling temp2, readings "
+ "might not make sense\n");
+ w83627hf_write_value(data, W83627HF_REG_TEMP2_CONFIG,
+ tmp & 0xfe);
+ }
+
+ /* Enable temp3 */
+ if (type != w83697hf) {
+ tmp = w83627hf_read_value(data,
+ W83627HF_REG_TEMP3_CONFIG);
+ if (tmp & 0x01) {
+ dev_warn(&pdev->dev, "Enabling temp3, "
+ "readings might not make sense\n");
+ w83627hf_write_value(data,
+ W83627HF_REG_TEMP3_CONFIG, tmp & 0xfe);
+ }
+ }
+ }
+
+ /* Start monitoring */
+ w83627hf_write_value(data, W83781D_REG_CONFIG,
+ (w83627hf_read_value(data,
+ W83781D_REG_CONFIG) & 0xf7)
+ | 0x01);
+
+ /* Enable VBAT monitoring if needed */
+ tmp = w83627hf_read_value(data, W83781D_REG_VBAT);
+ if (!(tmp & 0x01))
+ w83627hf_write_value(data, W83781D_REG_VBAT, tmp | 0x01);
+}
+
+static void w83627hf_update_fan_div(struct w83627hf_data *data)
+{
+ int reg;
+
+ reg = w83627hf_read_value(data, W83781D_REG_VID_FANDIV);
+ data->fan_div[0] = (reg >> 4) & 0x03;
+ data->fan_div[1] = (reg >> 6) & 0x03;
+ if (data->type != w83697hf) {
+ data->fan_div[2] = (w83627hf_read_value(data,
+ W83781D_REG_PIN) >> 6) & 0x03;
+ }
+ reg = w83627hf_read_value(data, W83781D_REG_VBAT);
+ data->fan_div[0] |= (reg >> 3) & 0x04;
+ data->fan_div[1] |= (reg >> 4) & 0x04;
+ if (data->type != w83697hf)
+ data->fan_div[2] |= (reg >> 5) & 0x04;
+}
+
+static struct w83627hf_data *w83627hf_update_device(struct device *dev)
+{
+ struct w83627hf_data *data = dev_get_drvdata(dev);
+ int i, num_temps = (data->type == w83697hf) ? 2 : 3;
+ int num_pwms = (data->type == w83697hf) ? 2 : 3;
+
+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
+ for (i = 0; i <= 8; i++) {
+ /* skip missing sensors */
+ if (((data->type == w83697hf) && (i == 1)) ||
+ ((data->type != w83627hf && data->type != w83697hf)
+ && (i == 5 || i == 6)))
+ continue;
+ data->in[i] =
+ w83627hf_read_value(data, W83781D_REG_IN(i));
+ data->in_min[i] =
+ w83627hf_read_value(data,
+ W83781D_REG_IN_MIN(i));
+ data->in_max[i] =
+ w83627hf_read_value(data,
+ W83781D_REG_IN_MAX(i));
+ }
+ for (i = 0; i <= 2; i++) {
+ data->fan[i] =
+ w83627hf_read_value(data, W83627HF_REG_FAN(i));
+ data->fan_min[i] =
+ w83627hf_read_value(data,
+ W83627HF_REG_FAN_MIN(i));
+ }
+ for (i = 0; i <= 2; i++) {
+ u8 tmp = w83627hf_read_value(data,
+ W836X7HF_REG_PWM(data->type, i));
+ /* bits 0-3 are reserved in 627THF */
+ if (data->type == w83627thf)
+ tmp &= 0xf0;
+ data->pwm[i] = tmp;
+ if (i == 1 &&
+ (data->type == w83627hf || data->type == w83697hf))
+ break;
+ }
+ if (data->type == w83627hf) {
+ u8 tmp = w83627hf_read_value(data,
+ W83627HF_REG_PWM_FREQ);
+ data->pwm_freq[0] = tmp & 0x07;
+ data->pwm_freq[1] = (tmp >> 4) & 0x07;
+ } else if (data->type != w83627thf) {
+ for (i = 1; i <= 3; i++) {
+ data->pwm_freq[i - 1] =
+ w83627hf_read_value(data,
+ W83637HF_REG_PWM_FREQ[i - 1]);
+ if (i == 2 && (data->type == w83697hf))
+ break;
+ }
+ }
+ if (data->type != w83627hf) {
+ for (i = 0; i < num_pwms; i++) {
+ u8 tmp = w83627hf_read_value(data,
+ W83627THF_REG_PWM_ENABLE[i]);
+ data->pwm_enable[i] =
+ ((tmp >> W83627THF_PWM_ENABLE_SHIFT[i])
+ & 0x03) + 1;
+ }
+ }
+ for (i = 0; i < num_temps; i++) {
+ data->temp[i] = w83627hf_read_value(
+ data, w83627hf_reg_temp[i]);
+ data->temp_max[i] = w83627hf_read_value(
+ data, w83627hf_reg_temp_over[i]);
+ data->temp_max_hyst[i] = w83627hf_read_value(
+ data, w83627hf_reg_temp_hyst[i]);
+ }
+
+ w83627hf_update_fan_div(data);
+
+ data->alarms =
+ w83627hf_read_value(data, W83781D_REG_ALARM1) |
+ (w83627hf_read_value(data, W83781D_REG_ALARM2) << 8) |
+ (w83627hf_read_value(data, W83781D_REG_ALARM3) << 16);
+ i = w83627hf_read_value(data, W83781D_REG_BEEP_INTS2);
+ data->beep_mask = (i << 8) |
+ w83627hf_read_value(data, W83781D_REG_BEEP_INTS1) |
+ w83627hf_read_value(data, W83781D_REG_BEEP_INTS3) << 16;
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ mutex_unlock(&data->update_lock);
+
+ return data;
+}
+
+static int __init w83627hf_device_add(unsigned short address,
+ const struct w83627hf_sio_data *sio_data)
+{
+ struct resource res = {
+ .start = address + WINB_REGION_OFFSET,
+ .end = address + WINB_REGION_OFFSET + WINB_REGION_SIZE - 1,
+ .name = DRVNAME,
+ .flags = IORESOURCE_IO,
+ };
+ int err;
+
+ err = acpi_check_resource_conflict(&res);
+ if (err)
+ goto exit;
+
+ pdev = platform_device_alloc(DRVNAME, address);
+ if (!pdev) {
+ err = -ENOMEM;
+ pr_err("Device allocation failed\n");
+ goto exit;
+ }
+
+ err = platform_device_add_resources(pdev, &res, 1);
+ if (err) {
+ pr_err("Device resource addition failed (%d)\n", err);
+ goto exit_device_put;
+ }
+
+ err = platform_device_add_data(pdev, sio_data,
+ sizeof(struct w83627hf_sio_data));
+ if (err) {
+ pr_err("Platform data allocation failed\n");
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(pdev);
+ if (err) {
+ pr_err("Device addition failed (%d)\n", err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev);
+exit:
+ return err;
+}
+
+static int __init sensors_w83627hf_init(void)
+{
+ int err;
+ unsigned short address;
+ struct w83627hf_sio_data sio_data;
+
+ if (w83627hf_find(0x2e, &address, &sio_data)
+ && w83627hf_find(0x4e, &address, &sio_data))
+ return -ENODEV;
+
+ err = platform_driver_register(&w83627hf_driver);
+ if (err)
+ goto exit;
+
+ /* Sets global pdev as a side effect */
+ err = w83627hf_device_add(address, &sio_data);
+ if (err)
+ goto exit_driver;
+
+ return 0;
+
+exit_driver:
+ platform_driver_unregister(&w83627hf_driver);
+exit:
+ return err;
+}
+
+static void __exit sensors_w83627hf_exit(void)
+{
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&w83627hf_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
+ "Philip Edelbrock <phil@netroedge.com>, "
+ "and Mark Studebaker <mdsxyz123@yahoo.com>");
+MODULE_DESCRIPTION("W83627HF driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83627hf_init);
+module_exit(sensors_w83627hf_exit);
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 01:01:43 +0000