diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/i2c/busses/i2c-i801.c | 2012 |
1 files changed, 2012 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c new file mode 100644 index 000000000..cb8f56022 --- /dev/null +++ b/drivers/i2c/busses/i2c-i801.c @@ -0,0 +1,2012 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, + Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker + <mdsxyz123@yahoo.com> + Copyright (C) 2007 - 2014 Jean Delvare <jdelvare@suse.de> + Copyright (C) 2010 Intel Corporation, + David Woodhouse <dwmw2@infradead.org> + +*/ + +/* + * Supports the following Intel I/O Controller Hubs (ICH): + * + * I/O Block I2C + * region SMBus Block proc. block + * Chip name PCI ID size PEC buffer call read + * --------------------------------------------------------------------------- + * 82801AA (ICH) 0x2413 16 no no no no + * 82801AB (ICH0) 0x2423 16 no no no no + * 82801BA (ICH2) 0x2443 16 no no no no + * 82801CA (ICH3) 0x2483 32 soft no no no + * 82801DB (ICH4) 0x24c3 32 hard yes no no + * 82801E (ICH5) 0x24d3 32 hard yes yes yes + * 6300ESB 0x25a4 32 hard yes yes yes + * 82801F (ICH6) 0x266a 32 hard yes yes yes + * 6310ESB/6320ESB 0x269b 32 hard yes yes yes + * 82801G (ICH7) 0x27da 32 hard yes yes yes + * 82801H (ICH8) 0x283e 32 hard yes yes yes + * 82801I (ICH9) 0x2930 32 hard yes yes yes + * EP80579 (Tolapai) 0x5032 32 hard yes yes yes + * ICH10 0x3a30 32 hard yes yes yes + * ICH10 0x3a60 32 hard yes yes yes + * 5/3400 Series (PCH) 0x3b30 32 hard yes yes yes + * 6 Series (PCH) 0x1c22 32 hard yes yes yes + * Patsburg (PCH) 0x1d22 32 hard yes yes yes + * Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes + * Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes + * Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes + * DH89xxCC (PCH) 0x2330 32 hard yes yes yes + * Panther Point (PCH) 0x1e22 32 hard yes yes yes + * Lynx Point (PCH) 0x8c22 32 hard yes yes yes + * Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes + * Avoton (SOC) 0x1f3c 32 hard yes yes yes + * Wellsburg (PCH) 0x8d22 32 hard yes yes yes + * Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes + * Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes + * Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes + * Coleto Creek (PCH) 0x23b0 32 hard yes yes yes + * Wildcat Point (PCH) 0x8ca2 32 hard yes yes yes + * Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes + * BayTrail (SOC) 0x0f12 32 hard yes yes yes + * Braswell (SOC) 0x2292 32 hard yes yes yes + * Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes + * Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes + * DNV (SOC) 0x19df 32 hard yes yes yes + * Emmitsburg (PCH) 0x1bc9 32 hard yes yes yes + * Broxton (SOC) 0x5ad4 32 hard yes yes yes + * Lewisburg (PCH) 0xa1a3 32 hard yes yes yes + * Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes + * Kaby Lake PCH-H (PCH) 0xa2a3 32 hard yes yes yes + * Gemini Lake (SOC) 0x31d4 32 hard yes yes yes + * Cannon Lake-H (PCH) 0xa323 32 hard yes yes yes + * Cannon Lake-LP (PCH) 0x9da3 32 hard yes yes yes + * Cedar Fork (PCH) 0x18df 32 hard yes yes yes + * Ice Lake-LP (PCH) 0x34a3 32 hard yes yes yes + * Comet Lake (PCH) 0x02a3 32 hard yes yes yes + * Comet Lake-H (PCH) 0x06a3 32 hard yes yes yes + * Elkhart Lake (PCH) 0x4b23 32 hard yes yes yes + * Tiger Lake-LP (PCH) 0xa0a3 32 hard yes yes yes + * Tiger Lake-H (PCH) 0x43a3 32 hard yes yes yes + * Jasper Lake (SOC) 0x4da3 32 hard yes yes yes + * Comet Lake-V (PCH) 0xa3a3 32 hard yes yes yes + * Alder Lake-S (PCH) 0x7aa3 32 hard yes yes yes + * + * Features supported by this driver: + * Software PEC no + * Hardware PEC yes + * Block buffer yes + * Block process call transaction yes + * I2C block read transaction yes (doesn't use the block buffer) + * Slave mode no + * SMBus Host Notify yes + * Interrupt processing yes + * + * See the file Documentation/i2c/busses/i2c-i801.rst for details. + */ + +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/stddef.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/i2c-smbus.h> +#include <linux/acpi.h> +#include <linux/io.h> +#include <linux/dmi.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/wait.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/platform_data/itco_wdt.h> +#include <linux/pm_runtime.h> + +#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI +#include <linux/gpio/machine.h> +#include <linux/platform_data/i2c-mux-gpio.h> +#endif + +/* I801 SMBus address offsets */ +#define SMBHSTSTS(p) (0 + (p)->smba) +#define SMBHSTCNT(p) (2 + (p)->smba) +#define SMBHSTCMD(p) (3 + (p)->smba) +#define SMBHSTADD(p) (4 + (p)->smba) +#define SMBHSTDAT0(p) (5 + (p)->smba) +#define SMBHSTDAT1(p) (6 + (p)->smba) +#define SMBBLKDAT(p) (7 + (p)->smba) +#define SMBPEC(p) (8 + (p)->smba) /* ICH3 and later */ +#define SMBAUXSTS(p) (12 + (p)->smba) /* ICH4 and later */ +#define SMBAUXCTL(p) (13 + (p)->smba) /* ICH4 and later */ +#define SMBSLVSTS(p) (16 + (p)->smba) /* ICH3 and later */ +#define SMBSLVCMD(p) (17 + (p)->smba) /* ICH3 and later */ +#define SMBNTFDADD(p) (20 + (p)->smba) /* ICH3 and later */ + +/* PCI Address Constants */ +#define SMBBAR 4 +#define SMBPCICTL 0x004 +#define SMBPCISTS 0x006 +#define SMBHSTCFG 0x040 +#define TCOBASE 0x050 +#define TCOCTL 0x054 + +#define SBREG_BAR 0x10 +#define SBREG_SMBCTRL 0xc6000c +#define SBREG_SMBCTRL_DNV 0xcf000c + +/* Host status bits for SMBPCISTS */ +#define SMBPCISTS_INTS BIT(3) + +/* Control bits for SMBPCICTL */ +#define SMBPCICTL_INTDIS BIT(10) + +/* Host configuration bits for SMBHSTCFG */ +#define SMBHSTCFG_HST_EN BIT(0) +#define SMBHSTCFG_SMB_SMI_EN BIT(1) +#define SMBHSTCFG_I2C_EN BIT(2) +#define SMBHSTCFG_SPD_WD BIT(4) + +/* TCO configuration bits for TCOCTL */ +#define TCOCTL_EN BIT(8) + +/* Auxiliary status register bits, ICH4+ only */ +#define SMBAUXSTS_CRCE BIT(0) +#define SMBAUXSTS_STCO BIT(1) + +/* Auxiliary control register bits, ICH4+ only */ +#define SMBAUXCTL_CRC BIT(0) +#define SMBAUXCTL_E32B BIT(1) + +/* Other settings */ +#define MAX_RETRIES 400 + +/* I801 command constants */ +#define I801_QUICK 0x00 +#define I801_BYTE 0x04 +#define I801_BYTE_DATA 0x08 +#define I801_WORD_DATA 0x0C +#define I801_PROC_CALL 0x10 /* unimplemented */ +#define I801_BLOCK_DATA 0x14 +#define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */ +#define I801_BLOCK_PROC_CALL 0x1C + +/* I801 Host Control register bits */ +#define SMBHSTCNT_INTREN BIT(0) +#define SMBHSTCNT_KILL BIT(1) +#define SMBHSTCNT_LAST_BYTE BIT(5) +#define SMBHSTCNT_START BIT(6) +#define SMBHSTCNT_PEC_EN BIT(7) /* ICH3 and later */ + +/* I801 Hosts Status register bits */ +#define SMBHSTSTS_BYTE_DONE BIT(7) +#define SMBHSTSTS_INUSE_STS BIT(6) +#define SMBHSTSTS_SMBALERT_STS BIT(5) +#define SMBHSTSTS_FAILED BIT(4) +#define SMBHSTSTS_BUS_ERR BIT(3) +#define SMBHSTSTS_DEV_ERR BIT(2) +#define SMBHSTSTS_INTR BIT(1) +#define SMBHSTSTS_HOST_BUSY BIT(0) + +/* Host Notify Status register bits */ +#define SMBSLVSTS_HST_NTFY_STS BIT(0) + +/* Host Notify Command register bits */ +#define SMBSLVCMD_HST_NTFY_INTREN BIT(0) + +#define STATUS_ERROR_FLAGS (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \ + SMBHSTSTS_DEV_ERR) + +#define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \ + STATUS_ERROR_FLAGS) + +/* Older devices have their ID defined in <linux/pci_ids.h> */ +#define PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS 0x02a3 +#define PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS 0x06a3 +#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12 +#define PCI_DEVICE_ID_INTEL_CDF_SMBUS 0x18df +#define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df +#define PCI_DEVICE_ID_INTEL_EBG_SMBUS 0x1bc9 +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 +#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22 +/* Patsburg also has three 'Integrated Device Function' SMBus controllers */ +#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70 +#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71 +#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22 +#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c +#define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS 0x2292 +#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 +#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0 +#define PCI_DEVICE_ID_INTEL_GEMINILAKE_SMBUS 0x31d4 +#define PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS 0x34a3 +#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 +#define PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS 0x43a3 +#define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS 0x4b23 +#define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS 0x4da3 +#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4 +#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS 0x7aa3 +#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22 +#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS 0x8ca2 +#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22 +#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0 0x8d7d +#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1 0x8d7e +#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 0x8d7f +#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22 +#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2 +#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23 +#define PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS 0x9da3 +#define PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS 0xa0a3 +#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123 +#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3 +#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223 +#define PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS 0xa2a3 +#define PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS 0xa323 +#define PCI_DEVICE_ID_INTEL_COMETLAKE_V_SMBUS 0xa3a3 + +struct i801_mux_config { + char *gpio_chip; + unsigned values[3]; + int n_values; + unsigned classes[3]; + unsigned gpios[2]; /* Relative to gpio_chip->base */ + int n_gpios; +}; + +struct i801_priv { + struct i2c_adapter adapter; + unsigned long smba; + unsigned char original_hstcfg; + unsigned char original_slvcmd; + struct pci_dev *pci_dev; + unsigned int features; + + /* isr processing */ + wait_queue_head_t waitq; + u8 status; + + /* Command state used by isr for byte-by-byte block transactions */ + u8 cmd; + bool is_read; + int count; + int len; + u8 *data; + +#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI + const struct i801_mux_config *mux_drvdata; + struct platform_device *mux_pdev; + struct gpiod_lookup_table *lookup; +#endif + struct platform_device *tco_pdev; + + /* + * If set to true the host controller registers are reserved for + * ACPI AML use. Protected by acpi_lock. + */ + bool acpi_reserved; + struct mutex acpi_lock; +}; + +#define FEATURE_SMBUS_PEC BIT(0) +#define FEATURE_BLOCK_BUFFER BIT(1) +#define FEATURE_BLOCK_PROC BIT(2) +#define FEATURE_I2C_BLOCK_READ BIT(3) +#define FEATURE_IRQ BIT(4) +#define FEATURE_HOST_NOTIFY BIT(5) +/* Not really a feature, but it's convenient to handle it as such */ +#define FEATURE_IDF BIT(15) +#define FEATURE_TCO_SPT BIT(16) +#define FEATURE_TCO_CNL BIT(17) + +static const char *i801_feature_names[] = { + "SMBus PEC", + "Block buffer", + "Block process call", + "I2C block read", + "Interrupt", + "SMBus Host Notify", +}; + +static unsigned int disable_features; +module_param(disable_features, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n" + "\t\t 0x01 disable SMBus PEC\n" + "\t\t 0x02 disable the block buffer\n" + "\t\t 0x08 disable the I2C block read functionality\n" + "\t\t 0x10 don't use interrupts\n" + "\t\t 0x20 disable SMBus Host Notify "); + +/* Make sure the SMBus host is ready to start transmitting. + Return 0 if it is, -EBUSY if it is not. */ +static int i801_check_pre(struct i801_priv *priv) +{ + int status; + + status = inb_p(SMBHSTSTS(priv)); + if (status & SMBHSTSTS_HOST_BUSY) { + dev_err(&priv->pci_dev->dev, "SMBus is busy, can't use it!\n"); + return -EBUSY; + } + + status &= STATUS_FLAGS; + if (status) { + dev_dbg(&priv->pci_dev->dev, "Clearing status flags (%02x)\n", + status); + outb_p(status, SMBHSTSTS(priv)); + status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS; + if (status) { + dev_err(&priv->pci_dev->dev, + "Failed clearing status flags (%02x)\n", + status); + return -EBUSY; + } + } + + /* + * Clear CRC status if needed. + * During normal operation, i801_check_post() takes care + * of it after every operation. We do it here only in case + * the hardware was already in this state when the driver + * started. + */ + if (priv->features & FEATURE_SMBUS_PEC) { + status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE; + if (status) { + dev_dbg(&priv->pci_dev->dev, + "Clearing aux status flags (%02x)\n", status); + outb_p(status, SMBAUXSTS(priv)); + status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE; + if (status) { + dev_err(&priv->pci_dev->dev, + "Failed clearing aux status flags (%02x)\n", + status); + return -EBUSY; + } + } + } + + return 0; +} + +/* + * Convert the status register to an error code, and clear it. + * Note that status only contains the bits we want to clear, not the + * actual register value. + */ +static int i801_check_post(struct i801_priv *priv, int status) +{ + int result = 0; + + /* + * If the SMBus is still busy, we give up + * Note: This timeout condition only happens when using polling + * transactions. For interrupt operation, NAK/timeout is indicated by + * DEV_ERR. + */ + if (unlikely(status < 0)) { + dev_err(&priv->pci_dev->dev, "Transaction timeout\n"); + /* try to stop the current command */ + dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n"); + outb_p(SMBHSTCNT_KILL, SMBHSTCNT(priv)); + usleep_range(1000, 2000); + outb_p(0, SMBHSTCNT(priv)); + + /* Check if it worked */ + status = inb_p(SMBHSTSTS(priv)); + if ((status & SMBHSTSTS_HOST_BUSY) || + !(status & SMBHSTSTS_FAILED)) + dev_err(&priv->pci_dev->dev, + "Failed terminating the transaction\n"); + outb_p(STATUS_FLAGS, SMBHSTSTS(priv)); + return -ETIMEDOUT; + } + + if (status & SMBHSTSTS_FAILED) { + result = -EIO; + dev_err(&priv->pci_dev->dev, "Transaction failed\n"); + } + if (status & SMBHSTSTS_DEV_ERR) { + /* + * This may be a PEC error, check and clear it. + * + * AUXSTS is handled differently from HSTSTS. + * For HSTSTS, i801_isr() or i801_wait_intr() + * has already cleared the error bits in hardware, + * and we are passed a copy of the original value + * in "status". + * For AUXSTS, the hardware register is left + * for us to handle here. + * This is asymmetric, slightly iffy, but safe, + * since all this code is serialized and the CRCE + * bit is harmless as long as it's cleared before + * the next operation. + */ + if ((priv->features & FEATURE_SMBUS_PEC) && + (inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE)) { + outb_p(SMBAUXSTS_CRCE, SMBAUXSTS(priv)); + result = -EBADMSG; + dev_dbg(&priv->pci_dev->dev, "PEC error\n"); + } else { + result = -ENXIO; + dev_dbg(&priv->pci_dev->dev, "No response\n"); + } + } + if (status & SMBHSTSTS_BUS_ERR) { + result = -EAGAIN; + dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n"); + } + + /* Clear status flags except BYTE_DONE, to be cleared by caller */ + outb_p(status, SMBHSTSTS(priv)); + + return result; +} + +/* Wait for BUSY being cleared and either INTR or an error flag being set */ +static int i801_wait_intr(struct i801_priv *priv) +{ + int timeout = 0; + int status; + + /* We will always wait for a fraction of a second! */ + do { + usleep_range(250, 500); + status = inb_p(SMBHSTSTS(priv)); + } while (((status & SMBHSTSTS_HOST_BUSY) || + !(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR))) && + (timeout++ < MAX_RETRIES)); + + if (timeout > MAX_RETRIES) { + dev_dbg(&priv->pci_dev->dev, "INTR Timeout!\n"); + return -ETIMEDOUT; + } + return status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR); +} + +/* Wait for either BYTE_DONE or an error flag being set */ +static int i801_wait_byte_done(struct i801_priv *priv) +{ + int timeout = 0; + int status; + + /* We will always wait for a fraction of a second! */ + do { + usleep_range(250, 500); + status = inb_p(SMBHSTSTS(priv)); + } while (!(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_BYTE_DONE)) && + (timeout++ < MAX_RETRIES)); + + if (timeout > MAX_RETRIES) { + dev_dbg(&priv->pci_dev->dev, "BYTE_DONE Timeout!\n"); + return -ETIMEDOUT; + } + return status & STATUS_ERROR_FLAGS; +} + +static int i801_transaction(struct i801_priv *priv, int xact) +{ + int status; + int result; + const struct i2c_adapter *adap = &priv->adapter; + + result = i801_check_pre(priv); + if (result < 0) + return result; + + if (priv->features & FEATURE_IRQ) { + outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START, + SMBHSTCNT(priv)); + result = wait_event_timeout(priv->waitq, + (status = priv->status), + adap->timeout); + if (!result) { + status = -ETIMEDOUT; + dev_warn(&priv->pci_dev->dev, + "Timeout waiting for interrupt!\n"); + } + priv->status = 0; + return i801_check_post(priv, status); + } + + /* the current contents of SMBHSTCNT can be overwritten, since PEC, + * SMBSCMD are passed in xact */ + outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv)); + + status = i801_wait_intr(priv); + return i801_check_post(priv, status); +} + +static int i801_block_transaction_by_block(struct i801_priv *priv, + union i2c_smbus_data *data, + char read_write, int command, + int hwpec) +{ + int i, len; + int status; + int xact = hwpec ? SMBHSTCNT_PEC_EN : 0; + + switch (command) { + case I2C_SMBUS_BLOCK_PROC_CALL: + xact |= I801_BLOCK_PROC_CALL; + break; + case I2C_SMBUS_BLOCK_DATA: + xact |= I801_BLOCK_DATA; + break; + default: + return -EOPNOTSUPP; + } + + inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */ + + /* Use 32-byte buffer to process this transaction */ + if (read_write == I2C_SMBUS_WRITE) { + len = data->block[0]; + outb_p(len, SMBHSTDAT0(priv)); + for (i = 0; i < len; i++) + outb_p(data->block[i+1], SMBBLKDAT(priv)); + } + + status = i801_transaction(priv, xact); + if (status) + return status; + + if (read_write == I2C_SMBUS_READ || + command == I2C_SMBUS_BLOCK_PROC_CALL) { + len = inb_p(SMBHSTDAT0(priv)); + if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) + return -EPROTO; + + data->block[0] = len; + for (i = 0; i < len; i++) + data->block[i + 1] = inb_p(SMBBLKDAT(priv)); + } + return 0; +} + +static void i801_isr_byte_done(struct i801_priv *priv) +{ + if (priv->is_read) { + /* For SMBus block reads, length is received with first byte */ + if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) && + (priv->count == 0)) { + priv->len = inb_p(SMBHSTDAT0(priv)); + if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) { + dev_err(&priv->pci_dev->dev, + "Illegal SMBus block read size %d\n", + priv->len); + /* FIXME: Recover */ + priv->len = I2C_SMBUS_BLOCK_MAX; + } else { + dev_dbg(&priv->pci_dev->dev, + "SMBus block read size is %d\n", + priv->len); + } + priv->data[-1] = priv->len; + } + + /* Read next byte */ + if (priv->count < priv->len) + priv->data[priv->count++] = inb(SMBBLKDAT(priv)); + else + dev_dbg(&priv->pci_dev->dev, + "Discarding extra byte on block read\n"); + + /* Set LAST_BYTE for last byte of read transaction */ + if (priv->count == priv->len - 1) + outb_p(priv->cmd | SMBHSTCNT_LAST_BYTE, + SMBHSTCNT(priv)); + } else if (priv->count < priv->len - 1) { + /* Write next byte, except for IRQ after last byte */ + outb_p(priv->data[++priv->count], SMBBLKDAT(priv)); + } + + /* Clear BYTE_DONE to continue with next byte */ + outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv)); +} + +static irqreturn_t i801_host_notify_isr(struct i801_priv *priv) +{ + unsigned short addr; + + addr = inb_p(SMBNTFDADD(priv)) >> 1; + + /* + * With the tested platforms, reading SMBNTFDDAT (22 + (p)->smba) + * always returns 0. Our current implementation doesn't provide + * data, so we just ignore it. + */ + i2c_handle_smbus_host_notify(&priv->adapter, addr); + + /* clear Host Notify bit and return */ + outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv)); + return IRQ_HANDLED; +} + +/* + * There are three kinds of interrupts: + * + * 1) i801 signals transaction completion with one of these interrupts: + * INTR - Success + * DEV_ERR - Invalid command, NAK or communication timeout + * BUS_ERR - SMI# transaction collision + * FAILED - transaction was canceled due to a KILL request + * When any of these occur, update ->status and wake up the waitq. + * ->status must be cleared before kicking off the next transaction. + * + * 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt + * occurs for each byte of a byte-by-byte to prepare the next byte. + * + * 3) Host Notify interrupts + */ +static irqreturn_t i801_isr(int irq, void *dev_id) +{ + struct i801_priv *priv = dev_id; + u16 pcists; + u8 status; + + /* Confirm this is our interrupt */ + pci_read_config_word(priv->pci_dev, SMBPCISTS, &pcists); + if (!(pcists & SMBPCISTS_INTS)) + return IRQ_NONE; + + if (priv->features & FEATURE_HOST_NOTIFY) { + status = inb_p(SMBSLVSTS(priv)); + if (status & SMBSLVSTS_HST_NTFY_STS) + return i801_host_notify_isr(priv); + } + + status = inb_p(SMBHSTSTS(priv)); + if (status & SMBHSTSTS_BYTE_DONE) + i801_isr_byte_done(priv); + + /* + * Clear irq sources and report transaction result. + * ->status must be cleared before the next transaction is started. + */ + status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS; + if (status) { + outb_p(status, SMBHSTSTS(priv)); + priv->status = status; + wake_up(&priv->waitq); + } + + return IRQ_HANDLED; +} + +/* + * For "byte-by-byte" block transactions: + * I2C write uses cmd=I801_BLOCK_DATA, I2C_EN=1 + * I2C read uses cmd=I801_I2C_BLOCK_DATA + */ +static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, + union i2c_smbus_data *data, + char read_write, int command, + int hwpec) +{ + int i, len; + int smbcmd; + int status; + int result; + const struct i2c_adapter *adap = &priv->adapter; + + if (command == I2C_SMBUS_BLOCK_PROC_CALL) + return -EOPNOTSUPP; + + result = i801_check_pre(priv); + if (result < 0) + return result; + + len = data->block[0]; + + if (read_write == I2C_SMBUS_WRITE) { + outb_p(len, SMBHSTDAT0(priv)); + outb_p(data->block[1], SMBBLKDAT(priv)); + } + + if (command == I2C_SMBUS_I2C_BLOCK_DATA && + read_write == I2C_SMBUS_READ) + smbcmd = I801_I2C_BLOCK_DATA; + else + smbcmd = I801_BLOCK_DATA; + + if (priv->features & FEATURE_IRQ) { + priv->is_read = (read_write == I2C_SMBUS_READ); + if (len == 1 && priv->is_read) + smbcmd |= SMBHSTCNT_LAST_BYTE; + priv->cmd = smbcmd | SMBHSTCNT_INTREN; + priv->len = len; + priv->count = 0; + priv->data = &data->block[1]; + + outb_p(priv->cmd | SMBHSTCNT_START, SMBHSTCNT(priv)); + result = wait_event_timeout(priv->waitq, + (status = priv->status), + adap->timeout); + if (!result) { + status = -ETIMEDOUT; + dev_warn(&priv->pci_dev->dev, + "Timeout waiting for interrupt!\n"); + } + priv->status = 0; + return i801_check_post(priv, status); + } + + if (len == 1 && read_write == I2C_SMBUS_READ) + smbcmd |= SMBHSTCNT_LAST_BYTE; + outb_p(smbcmd | SMBHSTCNT_START, SMBHSTCNT(priv)); + + for (i = 1; i <= len; i++) { + status = i801_wait_byte_done(priv); + if (status) + goto exit; + + if (i == 1 && read_write == I2C_SMBUS_READ + && command != I2C_SMBUS_I2C_BLOCK_DATA) { + len = inb_p(SMBHSTDAT0(priv)); + if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) { + dev_err(&priv->pci_dev->dev, + "Illegal SMBus block read size %d\n", + len); + /* Recover */ + while (inb_p(SMBHSTSTS(priv)) & + SMBHSTSTS_HOST_BUSY) + outb_p(SMBHSTSTS_BYTE_DONE, + SMBHSTSTS(priv)); + outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv)); + return -EPROTO; + } + data->block[0] = len; + } + + if (read_write == I2C_SMBUS_READ) { + data->block[i] = inb_p(SMBBLKDAT(priv)); + if (i == len - 1) + outb_p(smbcmd | SMBHSTCNT_LAST_BYTE, SMBHSTCNT(priv)); + } + + if (read_write == I2C_SMBUS_WRITE && i+1 <= len) + outb_p(data->block[i+1], SMBBLKDAT(priv)); + + /* signals SMBBLKDAT ready */ + outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv)); + } + + status = i801_wait_intr(priv); +exit: + return i801_check_post(priv, status); +} + +static int i801_set_block_buffer_mode(struct i801_priv *priv) +{ + outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv)); + if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0) + return -EIO; + return 0; +} + +/* Block transaction function */ +static int i801_block_transaction(struct i801_priv *priv, + union i2c_smbus_data *data, char read_write, + int command, int hwpec) +{ + int result = 0; + unsigned char hostc; + + if (read_write == I2C_SMBUS_READ && command == I2C_SMBUS_BLOCK_DATA) + data->block[0] = I2C_SMBUS_BLOCK_MAX; + else if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX) + return -EPROTO; + + if (command == I2C_SMBUS_I2C_BLOCK_DATA) { + if (read_write == I2C_SMBUS_WRITE) { + /* set I2C_EN bit in configuration register */ + pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc); + pci_write_config_byte(priv->pci_dev, SMBHSTCFG, + hostc | SMBHSTCFG_I2C_EN); + } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) { + dev_err(&priv->pci_dev->dev, + "I2C block read is unsupported!\n"); + return -EOPNOTSUPP; + } + } + + /* Experience has shown that the block buffer can only be used for + SMBus (not I2C) block transactions, even though the datasheet + doesn't mention this limitation. */ + if ((priv->features & FEATURE_BLOCK_BUFFER) + && command != I2C_SMBUS_I2C_BLOCK_DATA + && i801_set_block_buffer_mode(priv) == 0) + result = i801_block_transaction_by_block(priv, data, + read_write, + command, hwpec); + else + result = i801_block_transaction_byte_by_byte(priv, data, + read_write, + command, hwpec); + + if (command == I2C_SMBUS_I2C_BLOCK_DATA + && read_write == I2C_SMBUS_WRITE) { + /* restore saved configuration register value */ + pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc); + } + return result; +} + +/* Return negative errno on error. */ +static s32 i801_access(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, u8 command, + int size, union i2c_smbus_data *data) +{ + int hwpec; + int block = 0; + int ret = 0, xact = 0; + struct i801_priv *priv = i2c_get_adapdata(adap); + + mutex_lock(&priv->acpi_lock); + if (priv->acpi_reserved) { + mutex_unlock(&priv->acpi_lock); + return -EBUSY; + } + + pm_runtime_get_sync(&priv->pci_dev->dev); + + hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC) + && size != I2C_SMBUS_QUICK + && size != I2C_SMBUS_I2C_BLOCK_DATA; + + switch (size) { + case I2C_SMBUS_QUICK: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD(priv)); + xact = I801_QUICK; + break; + case I2C_SMBUS_BYTE: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD(priv)); + if (read_write == I2C_SMBUS_WRITE) + outb_p(command, SMBHSTCMD(priv)); + xact = I801_BYTE; + break; + case I2C_SMBUS_BYTE_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD(priv)); + outb_p(command, SMBHSTCMD(priv)); + if (read_write == I2C_SMBUS_WRITE) + outb_p(data->byte, SMBHSTDAT0(priv)); + xact = I801_BYTE_DATA; + break; + case I2C_SMBUS_WORD_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD(priv)); + outb_p(command, SMBHSTCMD(priv)); + if (read_write == I2C_SMBUS_WRITE) { + outb_p(data->word & 0xff, SMBHSTDAT0(priv)); + outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv)); + } + xact = I801_WORD_DATA; + break; + case I2C_SMBUS_BLOCK_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD(priv)); + outb_p(command, SMBHSTCMD(priv)); + block = 1; + break; + case I2C_SMBUS_I2C_BLOCK_DATA: + /* + * NB: page 240 of ICH5 datasheet shows that the R/#W + * bit should be cleared here, even when reading. + * However if SPD Write Disable is set (Lynx Point and later), + * the read will fail if we don't set the R/#W bit. + */ + outb_p(((addr & 0x7f) << 1) | + ((priv->original_hstcfg & SMBHSTCFG_SPD_WD) ? + (read_write & 0x01) : 0), + SMBHSTADD(priv)); + if (read_write == I2C_SMBUS_READ) { + /* NB: page 240 of ICH5 datasheet also shows + * that DATA1 is the cmd field when reading */ + outb_p(command, SMBHSTDAT1(priv)); + } else + outb_p(command, SMBHSTCMD(priv)); + block = 1; + break; + case I2C_SMBUS_BLOCK_PROC_CALL: + /* + * Bit 0 of the slave address register always indicate a write + * command. + */ + outb_p((addr & 0x7f) << 1, SMBHSTADD(priv)); + outb_p(command, SMBHSTCMD(priv)); + block = 1; + break; + default: + dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n", + size); + ret = -EOPNOTSUPP; + goto out; + } + + if (hwpec) /* enable/disable hardware PEC */ + outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv)); + else + outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC), + SMBAUXCTL(priv)); + + if (block) + ret = i801_block_transaction(priv, data, read_write, size, + hwpec); + else + ret = i801_transaction(priv, xact); + + /* Some BIOSes don't like it when PEC is enabled at reboot or resume + time, so we forcibly disable it after every transaction. Turn off + E32B for the same reason. */ + if (hwpec || block) + outb_p(inb_p(SMBAUXCTL(priv)) & + ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv)); + + if (block) + goto out; + if (ret) + goto out; + if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK)) + goto out; + + switch (xact & 0x7f) { + case I801_BYTE: /* Result put in SMBHSTDAT0 */ + case I801_BYTE_DATA: + data->byte = inb_p(SMBHSTDAT0(priv)); + break; + case I801_WORD_DATA: + data->word = inb_p(SMBHSTDAT0(priv)) + + (inb_p(SMBHSTDAT1(priv)) << 8); + break; + } + +out: + /* Unlock the SMBus device for use by BIOS/ACPI */ + outb_p(SMBHSTSTS_INUSE_STS, SMBHSTSTS(priv)); + + pm_runtime_mark_last_busy(&priv->pci_dev->dev); + pm_runtime_put_autosuspend(&priv->pci_dev->dev); + mutex_unlock(&priv->acpi_lock); + return ret; +} + + +static u32 i801_func(struct i2c_adapter *adapter) +{ + struct i801_priv *priv = i2c_get_adapdata(adapter); + + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK | + ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) | + ((priv->features & FEATURE_BLOCK_PROC) ? + I2C_FUNC_SMBUS_BLOCK_PROC_CALL : 0) | + ((priv->features & FEATURE_I2C_BLOCK_READ) ? + I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0) | + ((priv->features & FEATURE_HOST_NOTIFY) ? + I2C_FUNC_SMBUS_HOST_NOTIFY : 0); +} + +static void i801_enable_host_notify(struct i2c_adapter *adapter) +{ + struct i801_priv *priv = i2c_get_adapdata(adapter); + + if (!(priv->features & FEATURE_HOST_NOTIFY)) + return; + + if (!(SMBSLVCMD_HST_NTFY_INTREN & priv->original_slvcmd)) + outb_p(SMBSLVCMD_HST_NTFY_INTREN | priv->original_slvcmd, + SMBSLVCMD(priv)); + + /* clear Host Notify bit to allow a new notification */ + outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv)); +} + +static void i801_disable_host_notify(struct i801_priv *priv) +{ + if (!(priv->features & FEATURE_HOST_NOTIFY)) + return; + + outb_p(priv->original_slvcmd, SMBSLVCMD(priv)); +} + +static const struct i2c_algorithm smbus_algorithm = { + .smbus_xfer = i801_access, + .functionality = i801_func, +}; + +static const struct pci_device_id i801_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_2) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_3) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_3) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_3) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_4) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_16) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EP80579_1) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GEMINILAKE_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CDF_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EBG_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COMETLAKE_V_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS) }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, i801_ids); + +#if defined CONFIG_X86 && defined CONFIG_DMI +static unsigned char apanel_addr; + +/* Scan the system ROM for the signature "FJKEYINF" */ +static __init const void __iomem *bios_signature(const void __iomem *bios) +{ + ssize_t offset; + const unsigned char signature[] = "FJKEYINF"; + + for (offset = 0; offset < 0x10000; offset += 0x10) { + if (check_signature(bios + offset, signature, + sizeof(signature)-1)) + return bios + offset; + } + return NULL; +} + +static void __init input_apanel_init(void) +{ + void __iomem *bios; + const void __iomem *p; + + bios = ioremap(0xF0000, 0x10000); /* Can't fail */ + p = bios_signature(bios); + if (p) { + /* just use the first address */ + apanel_addr = readb(p + 8 + 3) >> 1; + } + iounmap(bios); +} + +struct dmi_onboard_device_info { + const char *name; + u8 type; + unsigned short i2c_addr; + const char *i2c_type; +}; + +static const struct dmi_onboard_device_info dmi_devices[] = { + { "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" }, + { "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" }, + { "Hades", DMI_DEV_TYPE_OTHER, 0x73, "fschds" }, +}; + +static void dmi_check_onboard_device(u8 type, const char *name, + struct i2c_adapter *adap) +{ + int i; + struct i2c_board_info info; + + for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) { + /* & ~0x80, ignore enabled/disabled bit */ + if ((type & ~0x80) != dmi_devices[i].type) + continue; + if (strcasecmp(name, dmi_devices[i].name)) + continue; + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = dmi_devices[i].i2c_addr; + strlcpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE); + i2c_new_client_device(adap, &info); + break; + } +} + +/* We use our own function to check for onboard devices instead of + dmi_find_device() as some buggy BIOS's have the devices we are interested + in marked as disabled */ +static void dmi_check_onboard_devices(const struct dmi_header *dm, void *adap) +{ + int i, count; + + if (dm->type != 10) + return; + + count = (dm->length - sizeof(struct dmi_header)) / 2; + for (i = 0; i < count; i++) { + const u8 *d = (char *)(dm + 1) + (i * 2); + const char *name = ((char *) dm) + dm->length; + u8 type = d[0]; + u8 s = d[1]; + + if (!s) + continue; + s--; + while (s > 0 && name[0]) { + name += strlen(name) + 1; + s--; + } + if (name[0] == 0) /* Bogus string reference */ + continue; + + dmi_check_onboard_device(type, name, adap); + } +} + +/* NOTE: Keep this list in sync with drivers/platform/x86/dell-smo8800.c */ +static const char *const acpi_smo8800_ids[] = { + "SMO8800", + "SMO8801", + "SMO8810", + "SMO8811", + "SMO8820", + "SMO8821", + "SMO8830", + "SMO8831", +}; + +static acpi_status check_acpi_smo88xx_device(acpi_handle obj_handle, + u32 nesting_level, + void *context, + void **return_value) +{ + struct acpi_device_info *info; + acpi_status status; + char *hid; + int i; + + status = acpi_get_object_info(obj_handle, &info); + if (ACPI_FAILURE(status)) + return AE_OK; + + if (!(info->valid & ACPI_VALID_HID)) + goto smo88xx_not_found; + + hid = info->hardware_id.string; + if (!hid) + goto smo88xx_not_found; + + i = match_string(acpi_smo8800_ids, ARRAY_SIZE(acpi_smo8800_ids), hid); + if (i < 0) + goto smo88xx_not_found; + + kfree(info); + + *((bool *)return_value) = true; + return AE_CTRL_TERMINATE; + +smo88xx_not_found: + kfree(info); + return AE_OK; +} + +static bool is_dell_system_with_lis3lv02d(void) +{ + bool found; + const char *vendor; + + vendor = dmi_get_system_info(DMI_SYS_VENDOR); + if (!vendor || strcmp(vendor, "Dell Inc.")) + return false; + + /* + * Check that ACPI device SMO88xx is present and is functioning. + * Function acpi_get_devices() already filters all ACPI devices + * which are not present or are not functioning. + * ACPI device SMO88xx represents our ST microelectronics lis3lv02d + * accelerometer but unfortunately ACPI does not provide any other + * information (like I2C address). + */ + found = false; + acpi_get_devices(NULL, check_acpi_smo88xx_device, NULL, + (void **)&found); + + return found; +} + +/* + * Accelerometer's I2C address is not specified in DMI nor ACPI, + * so it is needed to define mapping table based on DMI product names. + */ +static const struct { + const char *dmi_product_name; + unsigned short i2c_addr; +} dell_lis3lv02d_devices[] = { + /* + * Dell platform team told us that these Latitude devices have + * ST microelectronics accelerometer at I2C address 0x29. + */ + { "Latitude E5250", 0x29 }, + { "Latitude E5450", 0x29 }, + { "Latitude E5550", 0x29 }, + { "Latitude E6440", 0x29 }, + { "Latitude E6440 ATG", 0x29 }, + { "Latitude E6540", 0x29 }, + /* + * Additional individual entries were added after verification. + */ + { "Latitude 5480", 0x29 }, + { "Vostro V131", 0x1d }, + { "Vostro 5568", 0x29 }, +}; + +static void register_dell_lis3lv02d_i2c_device(struct i801_priv *priv) +{ + struct i2c_board_info info; + const char *dmi_product_name; + int i; + + dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME); + for (i = 0; i < ARRAY_SIZE(dell_lis3lv02d_devices); ++i) { + if (strcmp(dmi_product_name, + dell_lis3lv02d_devices[i].dmi_product_name) == 0) + break; + } + + if (i == ARRAY_SIZE(dell_lis3lv02d_devices)) { + dev_warn(&priv->pci_dev->dev, + "Accelerometer lis3lv02d is present on SMBus but its" + " address is unknown, skipping registration\n"); + return; + } + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = dell_lis3lv02d_devices[i].i2c_addr; + strlcpy(info.type, "lis3lv02d", I2C_NAME_SIZE); + i2c_new_client_device(&priv->adapter, &info); +} + +/* Register optional slaves */ +static void i801_probe_optional_slaves(struct i801_priv *priv) +{ + /* Only register slaves on main SMBus channel */ + if (priv->features & FEATURE_IDF) + return; + + if (apanel_addr) { + struct i2c_board_info info; + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = apanel_addr; + strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE); + i2c_new_client_device(&priv->adapter, &info); + } + + if (dmi_name_in_vendors("FUJITSU")) + dmi_walk(dmi_check_onboard_devices, &priv->adapter); + + if (is_dell_system_with_lis3lv02d()) + register_dell_lis3lv02d_i2c_device(priv); + + /* Instantiate SPD EEPROMs unless the SMBus is multiplexed */ +#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) + if (!priv->mux_drvdata) +#endif + i2c_register_spd(&priv->adapter); +} +#else +static void __init input_apanel_init(void) {} +static void i801_probe_optional_slaves(struct i801_priv *priv) {} +#endif /* CONFIG_X86 && CONFIG_DMI */ + +#if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI +static struct i801_mux_config i801_mux_config_asus_z8_d12 = { + .gpio_chip = "gpio_ich", + .values = { 0x02, 0x03 }, + .n_values = 2, + .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD }, + .gpios = { 52, 53 }, + .n_gpios = 2, +}; + +static struct i801_mux_config i801_mux_config_asus_z8_d18 = { + .gpio_chip = "gpio_ich", + .values = { 0x02, 0x03, 0x01 }, + .n_values = 3, + .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD, I2C_CLASS_SPD }, + .gpios = { 52, 53 }, + .n_gpios = 2, +}; + +static const struct dmi_system_id mux_dmi_table[] = { + { + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "Z8NA-D6(C)"), + }, + .driver_data = &i801_mux_config_asus_z8_d12, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)E-D12(X)"), + }, + .driver_data = &i801_mux_config_asus_z8_d12, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "Z8NH-D12"), + }, + .driver_data = &i801_mux_config_asus_z8_d12, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "Z8PH-D12/IFB"), + }, + .driver_data = &i801_mux_config_asus_z8_d12, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "Z8NR-D12"), + }, + .driver_data = &i801_mux_config_asus_z8_d12, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)H-D12"), + }, + .driver_data = &i801_mux_config_asus_z8_d12, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "Z8PG-D18"), + }, + .driver_data = &i801_mux_config_asus_z8_d18, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "Z8PE-D18"), + }, + .driver_data = &i801_mux_config_asus_z8_d18, + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "Z8PS-D12"), + }, + .driver_data = &i801_mux_config_asus_z8_d12, + }, + { } +}; + +/* Setup multiplexing if needed */ +static int i801_add_mux(struct i801_priv *priv) +{ + struct device *dev = &priv->adapter.dev; + const struct i801_mux_config *mux_config; + struct i2c_mux_gpio_platform_data gpio_data; + struct gpiod_lookup_table *lookup; + int err, i; + + if (!priv->mux_drvdata) + return 0; + mux_config = priv->mux_drvdata; + + /* Prepare the platform data */ + memset(&gpio_data, 0, sizeof(struct i2c_mux_gpio_platform_data)); + gpio_data.parent = priv->adapter.nr; + gpio_data.values = mux_config->values; + gpio_data.n_values = mux_config->n_values; + gpio_data.classes = mux_config->classes; + gpio_data.idle = I2C_MUX_GPIO_NO_IDLE; + + /* Register GPIO descriptor lookup table */ + lookup = devm_kzalloc(dev, + struct_size(lookup, table, mux_config->n_gpios + 1), + GFP_KERNEL); + if (!lookup) + return -ENOMEM; + lookup->dev_id = "i2c-mux-gpio"; + for (i = 0; i < mux_config->n_gpios; i++) { + lookup->table[i] = (struct gpiod_lookup) + GPIO_LOOKUP(mux_config->gpio_chip, + mux_config->gpios[i], "mux", 0); + } + gpiod_add_lookup_table(lookup); + priv->lookup = lookup; + + /* + * Register the mux device, we use PLATFORM_DEVID_NONE here + * because since we are referring to the GPIO chip by name we are + * anyways in deep trouble if there is more than one of these + * devices, and there should likely only be one platform controller + * hub. + */ + priv->mux_pdev = platform_device_register_data(dev, "i2c-mux-gpio", + PLATFORM_DEVID_NONE, &gpio_data, + sizeof(struct i2c_mux_gpio_platform_data)); + if (IS_ERR(priv->mux_pdev)) { + err = PTR_ERR(priv->mux_pdev); + gpiod_remove_lookup_table(lookup); + priv->mux_pdev = NULL; + dev_err(dev, "Failed to register i2c-mux-gpio device\n"); + return err; + } + + return 0; +} + +static void i801_del_mux(struct i801_priv *priv) +{ + if (priv->mux_pdev) + platform_device_unregister(priv->mux_pdev); + if (priv->lookup) + gpiod_remove_lookup_table(priv->lookup); +} + +static unsigned int i801_get_adapter_class(struct i801_priv *priv) +{ + const struct dmi_system_id *id; + const struct i801_mux_config *mux_config; + unsigned int class = I2C_CLASS_HWMON | I2C_CLASS_SPD; + int i; + + id = dmi_first_match(mux_dmi_table); + if (id) { + /* Remove branch classes from trunk */ + mux_config = id->driver_data; + for (i = 0; i < mux_config->n_values; i++) + class &= ~mux_config->classes[i]; + + /* Remember for later */ + priv->mux_drvdata = mux_config; + } + + return class; +} +#else +static inline int i801_add_mux(struct i801_priv *priv) { return 0; } +static inline void i801_del_mux(struct i801_priv *priv) { } + +static inline unsigned int i801_get_adapter_class(struct i801_priv *priv) +{ + return I2C_CLASS_HWMON | I2C_CLASS_SPD; +} +#endif + +static const struct itco_wdt_platform_data spt_tco_platform_data = { + .name = "Intel PCH", + .version = 4, +}; + +static DEFINE_SPINLOCK(p2sb_spinlock); + +static struct platform_device * +i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev, + struct resource *tco_res) +{ + struct resource *res; + unsigned int devfn; + u64 base64_addr; + u32 base_addr; + u8 hidden; + + /* + * We must access the NO_REBOOT bit over the Primary to Sideband + * bridge (P2SB). The BIOS prevents the P2SB device from being + * enumerated by the PCI subsystem, so we need to unhide/hide it + * to lookup the P2SB BAR. + */ + spin_lock(&p2sb_spinlock); + + devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 1); + + /* Unhide the P2SB device, if it is hidden */ + pci_bus_read_config_byte(pci_dev->bus, devfn, 0xe1, &hidden); + if (hidden) + pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, 0x0); + + pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR, &base_addr); + base64_addr = base_addr & 0xfffffff0; + + pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR + 0x4, &base_addr); + base64_addr |= (u64)base_addr << 32; + + /* Hide the P2SB device, if it was hidden before */ + if (hidden) + pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, hidden); + spin_unlock(&p2sb_spinlock); + + res = &tco_res[1]; + if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS) + res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL_DNV; + else + res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL; + + res->end = res->start + 3; + res->flags = IORESOURCE_MEM; + + return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1, + tco_res, 2, &spt_tco_platform_data, + sizeof(spt_tco_platform_data)); +} + +static const struct itco_wdt_platform_data cnl_tco_platform_data = { + .name = "Intel PCH", + .version = 6, +}; + +static struct platform_device * +i801_add_tco_cnl(struct i801_priv *priv, struct pci_dev *pci_dev, + struct resource *tco_res) +{ + return platform_device_register_resndata(&pci_dev->dev, + "iTCO_wdt", -1, tco_res, 1, &cnl_tco_platform_data, + sizeof(cnl_tco_platform_data)); +} + +static void i801_add_tco(struct i801_priv *priv) +{ + struct pci_dev *pci_dev = priv->pci_dev; + struct resource tco_res[2], *res; + u32 tco_base, tco_ctl; + + /* If we have ACPI based watchdog use that instead */ + if (acpi_has_watchdog()) + return; + + if (!(priv->features & (FEATURE_TCO_SPT | FEATURE_TCO_CNL))) + return; + + pci_read_config_dword(pci_dev, TCOBASE, &tco_base); + pci_read_config_dword(pci_dev, TCOCTL, &tco_ctl); + if (!(tco_ctl & TCOCTL_EN)) + return; + + memset(tco_res, 0, sizeof(tco_res)); + /* + * Always populate the main iTCO IO resource here. The second entry + * for NO_REBOOT MMIO is filled by the SPT specific function. + */ + res = &tco_res[0]; + res->start = tco_base & ~1; + res->end = res->start + 32 - 1; + res->flags = IORESOURCE_IO; + + if (priv->features & FEATURE_TCO_CNL) + priv->tco_pdev = i801_add_tco_cnl(priv, pci_dev, tco_res); + else + priv->tco_pdev = i801_add_tco_spt(priv, pci_dev, tco_res); + + if (IS_ERR(priv->tco_pdev)) + dev_warn(&pci_dev->dev, "failed to create iTCO device\n"); +} + +#ifdef CONFIG_ACPI +static bool i801_acpi_is_smbus_ioport(const struct i801_priv *priv, + acpi_physical_address address) +{ + return address >= priv->smba && + address <= pci_resource_end(priv->pci_dev, SMBBAR); +} + +static acpi_status +i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits, + u64 *value, void *handler_context, void *region_context) +{ + struct i801_priv *priv = handler_context; + struct pci_dev *pdev = priv->pci_dev; + acpi_status status; + + /* + * Once BIOS AML code touches the OpRegion we warn and inhibit any + * further access from the driver itself. This device is now owned + * by the system firmware. + */ + mutex_lock(&priv->acpi_lock); + + if (!priv->acpi_reserved && i801_acpi_is_smbus_ioport(priv, address)) { + priv->acpi_reserved = true; + + dev_warn(&pdev->dev, "BIOS is accessing SMBus registers\n"); + dev_warn(&pdev->dev, "Driver SMBus register access inhibited\n"); + + /* + * BIOS is accessing the host controller so prevent it from + * suspending automatically from now on. + */ + pm_runtime_get_sync(&pdev->dev); + } + + if ((function & ACPI_IO_MASK) == ACPI_READ) + status = acpi_os_read_port(address, (u32 *)value, bits); + else + status = acpi_os_write_port(address, (u32)*value, bits); + + mutex_unlock(&priv->acpi_lock); + + return status; +} + +static int i801_acpi_probe(struct i801_priv *priv) +{ + struct acpi_device *adev; + acpi_status status; + + adev = ACPI_COMPANION(&priv->pci_dev->dev); + if (adev) { + status = acpi_install_address_space_handler(adev->handle, + ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler, + NULL, priv); + if (ACPI_SUCCESS(status)) + return 0; + } + + return acpi_check_resource_conflict(&priv->pci_dev->resource[SMBBAR]); +} + +static void i801_acpi_remove(struct i801_priv *priv) +{ + struct acpi_device *adev; + + adev = ACPI_COMPANION(&priv->pci_dev->dev); + if (!adev) + return; + + acpi_remove_address_space_handler(adev->handle, + ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler); + + mutex_lock(&priv->acpi_lock); + if (priv->acpi_reserved) + pm_runtime_put(&priv->pci_dev->dev); + mutex_unlock(&priv->acpi_lock); +} +#else +static inline int i801_acpi_probe(struct i801_priv *priv) { return 0; } +static inline void i801_acpi_remove(struct i801_priv *priv) { } +#endif + +static unsigned char i801_setup_hstcfg(struct i801_priv *priv) +{ + unsigned char hstcfg = priv->original_hstcfg; + + hstcfg &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */ + hstcfg |= SMBHSTCFG_HST_EN; + pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hstcfg); + return hstcfg; +} + +static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + unsigned char temp; + int err, i; + struct i801_priv *priv; + + priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + i2c_set_adapdata(&priv->adapter, priv); + priv->adapter.owner = THIS_MODULE; + priv->adapter.class = i801_get_adapter_class(priv); + priv->adapter.algo = &smbus_algorithm; + priv->adapter.dev.parent = &dev->dev; + ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&dev->dev)); + priv->adapter.retries = 3; + mutex_init(&priv->acpi_lock); + + priv->pci_dev = dev; + switch (dev->device) { + case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS: + case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS: + case PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS: + case PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS: + case PCI_DEVICE_ID_INTEL_DNV_SMBUS: + case PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS: + case PCI_DEVICE_ID_INTEL_COMETLAKE_V_SMBUS: + priv->features |= FEATURE_BLOCK_PROC; + priv->features |= FEATURE_I2C_BLOCK_READ; + priv->features |= FEATURE_IRQ; + priv->features |= FEATURE_SMBUS_PEC; + priv->features |= FEATURE_BLOCK_BUFFER; + priv->features |= FEATURE_TCO_SPT; + priv->features |= FEATURE_HOST_NOTIFY; + break; + + case PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS: + case PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS: + case PCI_DEVICE_ID_INTEL_CDF_SMBUS: + case PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS: + case PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS: + case PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS: + case PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS: + case PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS: + case PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS: + case PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS: + case PCI_DEVICE_ID_INTEL_EBG_SMBUS: + case PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS: + priv->features |= FEATURE_BLOCK_PROC; + priv->features |= FEATURE_I2C_BLOCK_READ; + priv->features |= FEATURE_IRQ; + priv->features |= FEATURE_SMBUS_PEC; + priv->features |= FEATURE_BLOCK_BUFFER; + priv->features |= FEATURE_TCO_CNL; + priv->features |= FEATURE_HOST_NOTIFY; + break; + + case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0: + case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1: + case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2: + case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0: + case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1: + case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2: + priv->features |= FEATURE_IDF; + fallthrough; + default: + priv->features |= FEATURE_BLOCK_PROC; + priv->features |= FEATURE_I2C_BLOCK_READ; + priv->features |= FEATURE_IRQ; + fallthrough; + case PCI_DEVICE_ID_INTEL_82801DB_3: + priv->features |= FEATURE_SMBUS_PEC; + priv->features |= FEATURE_BLOCK_BUFFER; + fallthrough; + case PCI_DEVICE_ID_INTEL_82801CA_3: + priv->features |= FEATURE_HOST_NOTIFY; + fallthrough; + case PCI_DEVICE_ID_INTEL_82801BA_2: + case PCI_DEVICE_ID_INTEL_82801AB_3: + case PCI_DEVICE_ID_INTEL_82801AA_3: + break; + } + + /* Disable features on user request */ + for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) { + if (priv->features & disable_features & (1 << i)) + dev_notice(&dev->dev, "%s disabled by user\n", + i801_feature_names[i]); + } + priv->features &= ~disable_features; + + err = pcim_enable_device(dev); + if (err) { + dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n", + err); + return err; + } + pcim_pin_device(dev); + + /* Determine the address of the SMBus area */ + priv->smba = pci_resource_start(dev, SMBBAR); + if (!priv->smba) { + dev_err(&dev->dev, + "SMBus base address uninitialized, upgrade BIOS\n"); + return -ENODEV; + } + + if (i801_acpi_probe(priv)) + return -ENODEV; + + err = pcim_iomap_regions(dev, 1 << SMBBAR, + dev_driver_string(&dev->dev)); + if (err) { + dev_err(&dev->dev, + "Failed to request SMBus region 0x%lx-0x%Lx\n", + priv->smba, + (unsigned long long)pci_resource_end(dev, SMBBAR)); + i801_acpi_remove(priv); + return err; + } + + pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &priv->original_hstcfg); + temp = i801_setup_hstcfg(priv); + if (!(priv->original_hstcfg & SMBHSTCFG_HST_EN)) + dev_info(&dev->dev, "Enabling SMBus device\n"); + + if (temp & SMBHSTCFG_SMB_SMI_EN) { + dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n"); + /* Disable SMBus interrupt feature if SMBus using SMI# */ + priv->features &= ~FEATURE_IRQ; + } + if (temp & SMBHSTCFG_SPD_WD) + dev_info(&dev->dev, "SPD Write Disable is set\n"); + + /* Clear special mode bits */ + if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER)) + outb_p(inb_p(SMBAUXCTL(priv)) & + ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv)); + + /* Remember original Host Notify setting */ + if (priv->features & FEATURE_HOST_NOTIFY) + priv->original_slvcmd = inb_p(SMBSLVCMD(priv)); + + /* Default timeout in interrupt mode: 200 ms */ + priv->adapter.timeout = HZ / 5; + + if (dev->irq == IRQ_NOTCONNECTED) + priv->features &= ~FEATURE_IRQ; + + if (priv->features & FEATURE_IRQ) { + u16 pcictl, pcists; + + /* Complain if an interrupt is already pending */ + pci_read_config_word(priv->pci_dev, SMBPCISTS, &pcists); + if (pcists & SMBPCISTS_INTS) + dev_warn(&dev->dev, "An interrupt is pending!\n"); + + /* Check if interrupts have been disabled */ + pci_read_config_word(priv->pci_dev, SMBPCICTL, &pcictl); + if (pcictl & SMBPCICTL_INTDIS) { + dev_info(&dev->dev, "Interrupts are disabled\n"); + priv->features &= ~FEATURE_IRQ; + } + } + + if (priv->features & FEATURE_IRQ) { + init_waitqueue_head(&priv->waitq); + + err = devm_request_irq(&dev->dev, dev->irq, i801_isr, + IRQF_SHARED, + dev_driver_string(&dev->dev), priv); + if (err) { + dev_err(&dev->dev, "Failed to allocate irq %d: %d\n", + dev->irq, err); + priv->features &= ~FEATURE_IRQ; + } + } + dev_info(&dev->dev, "SMBus using %s\n", + priv->features & FEATURE_IRQ ? "PCI interrupt" : "polling"); + + i801_add_tco(priv); + + snprintf(priv->adapter.name, sizeof(priv->adapter.name), + "SMBus I801 adapter at %04lx", priv->smba); + err = i2c_add_adapter(&priv->adapter); + if (err) { + platform_device_unregister(priv->tco_pdev); + i801_acpi_remove(priv); + return err; + } + + i801_enable_host_notify(&priv->adapter); + + i801_probe_optional_slaves(priv); + /* We ignore errors - multiplexing is optional */ + i801_add_mux(priv); + + pci_set_drvdata(dev, priv); + + dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE); + pm_runtime_set_autosuspend_delay(&dev->dev, 1000); + pm_runtime_use_autosuspend(&dev->dev); + pm_runtime_put_autosuspend(&dev->dev); + pm_runtime_allow(&dev->dev); + + return 0; +} + +static void i801_remove(struct pci_dev *dev) +{ + struct i801_priv *priv = pci_get_drvdata(dev); + + pm_runtime_forbid(&dev->dev); + pm_runtime_get_noresume(&dev->dev); + + i801_disable_host_notify(priv); + i801_del_mux(priv); + i2c_del_adapter(&priv->adapter); + i801_acpi_remove(priv); + pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); + + platform_device_unregister(priv->tco_pdev); + + /* + * do not call pci_disable_device(dev) since it can cause hard hangs on + * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010) + */ +} + +static void i801_shutdown(struct pci_dev *dev) +{ + struct i801_priv *priv = pci_get_drvdata(dev); + + /* Restore config registers to avoid hard hang on some systems */ + i801_disable_host_notify(priv); + pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); +} + +#ifdef CONFIG_PM_SLEEP +static int i801_suspend(struct device *dev) +{ + struct i801_priv *priv = dev_get_drvdata(dev); + + pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg); + return 0; +} + +static int i801_resume(struct device *dev) +{ + struct i801_priv *priv = dev_get_drvdata(dev); + + i801_setup_hstcfg(priv); + i801_enable_host_notify(&priv->adapter); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(i801_pm_ops, i801_suspend, i801_resume); + +static struct pci_driver i801_driver = { + .name = "i801_smbus", + .id_table = i801_ids, + .probe = i801_probe, + .remove = i801_remove, + .shutdown = i801_shutdown, + .driver = { + .pm = &i801_pm_ops, + }, +}; + +static int __init i2c_i801_init(void) +{ + if (dmi_name_in_vendors("FUJITSU")) + input_apanel_init(); + return pci_register_driver(&i801_driver); +} + +static void __exit i2c_i801_exit(void) +{ + pci_unregister_driver(&i801_driver); +} + +MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>"); +MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); +MODULE_DESCRIPTION("I801 SMBus driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_i801_init); +module_exit(i2c_i801_exit); |