diff options
Diffstat (limited to 'drivers/iio/dummy')
| -rw-r--r-- | drivers/iio/dummy/Kconfig | 45 | ||||
| -rw-r--r-- | drivers/iio/dummy/Makefile | 11 | ||||
| -rw-r--r-- | drivers/iio/dummy/iio_dummy_evgen.c | 222 | ||||
| -rw-r--r-- | drivers/iio/dummy/iio_dummy_evgen.h | 14 | ||||
| -rw-r--r-- | drivers/iio/dummy/iio_simple_dummy.c | 722 | ||||
| -rw-r--r-- | drivers/iio/dummy/iio_simple_dummy.h | 126 | ||||
| -rw-r--r-- | drivers/iio/dummy/iio_simple_dummy_buffer.c | 174 | ||||
| -rw-r--r-- | drivers/iio/dummy/iio_simple_dummy_events.c | 276 |
8 files changed, 1590 insertions, 0 deletions
diff --git a/drivers/iio/dummy/Kconfig b/drivers/iio/dummy/Kconfig new file mode 100644 index 000000000..5c5c2f8c5 --- /dev/null +++ b/drivers/iio/dummy/Kconfig @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Industrial I/O subsystem Dummy Driver configuration +# +menu "IIO dummy driver" + depends on IIO + +config IIO_DUMMY_EVGEN + select IRQ_SIM + tristate + +config IIO_SIMPLE_DUMMY + tristate "An example driver with no hardware requirements" + depends on IIO_SW_DEVICE + help + Driver intended mainly as documentation for how to write + a driver. May also be useful for testing userspace code + without hardware. + +if IIO_SIMPLE_DUMMY + +config IIO_SIMPLE_DUMMY_EVENTS + bool "Event generation support" + select IIO_DUMMY_EVGEN + help + Add some dummy events to the simple dummy driver. + + The purpose of this is to generate 'fake' event interrupts thus + allowing that driver's code to be as close as possible to that + a normal driver talking to hardware. + +config IIO_SIMPLE_DUMMY_BUFFER + bool "Buffered capture support" + select IIO_BUFFER + select IIO_TRIGGER + select IIO_KFIFO_BUF + help + Add buffered data capture to the simple dummy driver. + + Buffer handling elements of industrial I/O reference driver. + Uses the kfifo buffer. + +endif # IIO_SIMPLE_DUMMY + +endmenu diff --git a/drivers/iio/dummy/Makefile b/drivers/iio/dummy/Makefile new file mode 100644 index 000000000..f14fe20f3 --- /dev/null +++ b/drivers/iio/dummy/Makefile @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the IIO Dummy Driver +# + +obj-$(CONFIG_IIO_SIMPLE_DUMMY) += iio_dummy.o +iio_dummy-y := iio_simple_dummy.o +iio_dummy-$(CONFIG_IIO_SIMPLE_DUMMY_EVENTS) += iio_simple_dummy_events.o +iio_dummy-$(CONFIG_IIO_SIMPLE_DUMMY_BUFFER) += iio_simple_dummy_buffer.o + +obj-$(CONFIG_IIO_DUMMY_EVGEN) += iio_dummy_evgen.o diff --git a/drivers/iio/dummy/iio_dummy_evgen.c b/drivers/iio/dummy/iio_dummy_evgen.c new file mode 100644 index 000000000..5a0072727 --- /dev/null +++ b/drivers/iio/dummy/iio_dummy_evgen.c @@ -0,0 +1,222 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2011 Jonathan Cameron + * + * Companion module to the iio simple dummy example driver. + * The purpose of this is to generate 'fake' event interrupts thus + * allowing that driver's code to be as close as possible to that of + * a normal driver talking to hardware. The approach used here + * is not intended to be general and just happens to work for this + * particular use case. + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/mutex.h> +#include <linux/module.h> +#include <linux/sysfs.h> + +#include "iio_dummy_evgen.h" +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/irq_sim.h> + +/* Fiddly bit of faking and irq without hardware */ +#define IIO_EVENTGEN_NO 10 + +/** + * struct iio_dummy_eventgen - event generator specific state + * @regs: irq regs we are faking + * @lock: protect the evgen state + * @inuse: mask of which irqs are connected + * @irq_sim: interrupt simulator + * @base: base of irq range + * @irq_sim_domain: irq simulator domain + */ +struct iio_dummy_eventgen { + struct iio_dummy_regs regs[IIO_EVENTGEN_NO]; + struct mutex lock; + bool inuse[IIO_EVENTGEN_NO]; + struct irq_domain *irq_sim_domain; +}; + +/* We can only ever have one instance of this 'device' */ +static struct iio_dummy_eventgen *iio_evgen; + +static int iio_dummy_evgen_create(void) +{ + int ret; + + iio_evgen = kzalloc(sizeof(*iio_evgen), GFP_KERNEL); + if (!iio_evgen) + return -ENOMEM; + + iio_evgen->irq_sim_domain = irq_domain_create_sim(NULL, + IIO_EVENTGEN_NO); + if (IS_ERR(iio_evgen->irq_sim_domain)) { + ret = PTR_ERR(iio_evgen->irq_sim_domain); + kfree(iio_evgen); + return ret; + } + + mutex_init(&iio_evgen->lock); + + return 0; +} + +/** + * iio_dummy_evgen_get_irq() - get an evgen provided irq for a device + * + * This function will give a free allocated irq to a client device. + * That irq can then be caused to 'fire' by using the associated sysfs file. + */ +int iio_dummy_evgen_get_irq(void) +{ + int i, ret = 0; + + if (!iio_evgen) + return -ENODEV; + + mutex_lock(&iio_evgen->lock); + for (i = 0; i < IIO_EVENTGEN_NO; i++) { + if (!iio_evgen->inuse[i]) { + ret = irq_create_mapping(iio_evgen->irq_sim_domain, i); + iio_evgen->inuse[i] = true; + break; + } + } + mutex_unlock(&iio_evgen->lock); + if (i == IIO_EVENTGEN_NO) + return -ENOMEM; + + return ret; +} +EXPORT_SYMBOL_GPL(iio_dummy_evgen_get_irq); + +/** + * iio_dummy_evgen_release_irq() - give the irq back. + * @irq: irq being returned to the pool + * + * Used by client driver instances to give the irqs back when they disconnect + */ +void iio_dummy_evgen_release_irq(int irq) +{ + struct irq_data *irqd = irq_get_irq_data(irq); + + mutex_lock(&iio_evgen->lock); + iio_evgen->inuse[irqd_to_hwirq(irqd)] = false; + irq_dispose_mapping(irq); + mutex_unlock(&iio_evgen->lock); +} +EXPORT_SYMBOL_GPL(iio_dummy_evgen_release_irq); + +struct iio_dummy_regs *iio_dummy_evgen_get_regs(int irq) +{ + struct irq_data *irqd = irq_get_irq_data(irq); + + return &iio_evgen->regs[irqd_to_hwirq(irqd)]; + +} +EXPORT_SYMBOL_GPL(iio_dummy_evgen_get_regs); + +static void iio_dummy_evgen_free(void) +{ + irq_domain_remove_sim(iio_evgen->irq_sim_domain); + kfree(iio_evgen); +} + +static void iio_evgen_release(struct device *dev) +{ + iio_dummy_evgen_free(); +} + +static ssize_t iio_evgen_poke(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t len) +{ + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + unsigned long event; + int ret, irq; + + ret = kstrtoul(buf, 10, &event); + if (ret) + return ret; + + iio_evgen->regs[this_attr->address].reg_id = this_attr->address; + iio_evgen->regs[this_attr->address].reg_data = event; + + irq = irq_find_mapping(iio_evgen->irq_sim_domain, this_attr->address); + ret = irq_set_irqchip_state(irq, IRQCHIP_STATE_PENDING, true); + if (ret) + return ret; + + return len; +} + +static IIO_DEVICE_ATTR(poke_ev0, S_IWUSR, NULL, &iio_evgen_poke, 0); +static IIO_DEVICE_ATTR(poke_ev1, S_IWUSR, NULL, &iio_evgen_poke, 1); +static IIO_DEVICE_ATTR(poke_ev2, S_IWUSR, NULL, &iio_evgen_poke, 2); +static IIO_DEVICE_ATTR(poke_ev3, S_IWUSR, NULL, &iio_evgen_poke, 3); +static IIO_DEVICE_ATTR(poke_ev4, S_IWUSR, NULL, &iio_evgen_poke, 4); +static IIO_DEVICE_ATTR(poke_ev5, S_IWUSR, NULL, &iio_evgen_poke, 5); +static IIO_DEVICE_ATTR(poke_ev6, S_IWUSR, NULL, &iio_evgen_poke, 6); +static IIO_DEVICE_ATTR(poke_ev7, S_IWUSR, NULL, &iio_evgen_poke, 7); +static IIO_DEVICE_ATTR(poke_ev8, S_IWUSR, NULL, &iio_evgen_poke, 8); +static IIO_DEVICE_ATTR(poke_ev9, S_IWUSR, NULL, &iio_evgen_poke, 9); + +static struct attribute *iio_evgen_attrs[] = { + &iio_dev_attr_poke_ev0.dev_attr.attr, + &iio_dev_attr_poke_ev1.dev_attr.attr, + &iio_dev_attr_poke_ev2.dev_attr.attr, + &iio_dev_attr_poke_ev3.dev_attr.attr, + &iio_dev_attr_poke_ev4.dev_attr.attr, + &iio_dev_attr_poke_ev5.dev_attr.attr, + &iio_dev_attr_poke_ev6.dev_attr.attr, + &iio_dev_attr_poke_ev7.dev_attr.attr, + &iio_dev_attr_poke_ev8.dev_attr.attr, + &iio_dev_attr_poke_ev9.dev_attr.attr, + NULL, +}; + +static const struct attribute_group iio_evgen_group = { + .attrs = iio_evgen_attrs, +}; + +static const struct attribute_group *iio_evgen_groups[] = { + &iio_evgen_group, + NULL +}; + +static struct device iio_evgen_dev = { + .bus = &iio_bus_type, + .groups = iio_evgen_groups, + .release = &iio_evgen_release, +}; + +static __init int iio_dummy_evgen_init(void) +{ + int ret = iio_dummy_evgen_create(); + + if (ret < 0) + return ret; + device_initialize(&iio_evgen_dev); + dev_set_name(&iio_evgen_dev, "iio_evgen"); + ret = device_add(&iio_evgen_dev); + if (ret) + put_device(&iio_evgen_dev); + return ret; +} +module_init(iio_dummy_evgen_init); + +static __exit void iio_dummy_evgen_exit(void) +{ + device_unregister(&iio_evgen_dev); +} +module_exit(iio_dummy_evgen_exit); + +MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>"); +MODULE_DESCRIPTION("IIO dummy driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/dummy/iio_dummy_evgen.h b/drivers/iio/dummy/iio_dummy_evgen.h new file mode 100644 index 000000000..e0bf64fe9 --- /dev/null +++ b/drivers/iio/dummy/iio_dummy_evgen.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _IIO_DUMMY_EVGEN_H_ +#define _IIO_DUMMY_EVGEN_H_ + +struct iio_dummy_regs { + u32 reg_id; + u32 reg_data; +}; + +struct iio_dummy_regs *iio_dummy_evgen_get_regs(int irq); +int iio_dummy_evgen_get_irq(void); +void iio_dummy_evgen_release_irq(int irq); + +#endif /* _IIO_DUMMY_EVGEN_H_ */ diff --git a/drivers/iio/dummy/iio_simple_dummy.c b/drivers/iio/dummy/iio_simple_dummy.c new file mode 100644 index 000000000..c24f609c2 --- /dev/null +++ b/drivers/iio/dummy/iio_simple_dummy.c @@ -0,0 +1,722 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2011 Jonathan Cameron + * + * A reference industrial I/O driver to illustrate the functionality available. + * + * There are numerous real drivers to illustrate the finer points. + * The purpose of this driver is to provide a driver with far more comments + * and explanatory notes than any 'real' driver would have. + * Anyone starting out writing an IIO driver should first make sure they + * understand all of this driver except those bits specifically marked + * as being present to allow us to 'fake' the presence of hardware. + */ +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/string.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> +#include <linux/iio/buffer.h> +#include <linux/iio/sw_device.h> +#include "iio_simple_dummy.h" + +static const struct config_item_type iio_dummy_type = { + .ct_owner = THIS_MODULE, +}; + +/** + * struct iio_dummy_accel_calibscale - realworld to register mapping + * @val: first value in read_raw - here integer part. + * @val2: second value in read_raw etc - here micro part. + * @regval: register value - magic device specific numbers. + */ +struct iio_dummy_accel_calibscale { + int val; + int val2; + int regval; /* what would be written to hardware */ +}; + +static const struct iio_dummy_accel_calibscale dummy_scales[] = { + { 0, 100, 0x8 }, /* 0.000100 */ + { 0, 133, 0x7 }, /* 0.000133 */ + { 733, 13, 0x9 }, /* 733.000013 */ +}; + +#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS + +/* + * simple event - triggered when value rises above + * a threshold + */ +static const struct iio_event_spec iio_dummy_event = { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_RISING, + .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE), +}; + +/* + * simple step detect event - triggered when a step is detected + */ +static const struct iio_event_spec step_detect_event = { + .type = IIO_EV_TYPE_CHANGE, + .dir = IIO_EV_DIR_NONE, + .mask_separate = BIT(IIO_EV_INFO_ENABLE), +}; + +/* + * simple transition event - triggered when the reported running confidence + * value rises above a threshold value + */ +static const struct iio_event_spec iio_running_event = { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_RISING, + .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE), +}; + +/* + * simple transition event - triggered when the reported walking confidence + * value falls under a threshold value + */ +static const struct iio_event_spec iio_walking_event = { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_FALLING, + .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE), +}; +#endif + +/* + * iio_dummy_channels - Description of available channels + * + * This array of structures tells the IIO core about what the device + * actually provides for a given channel. + */ +static const struct iio_chan_spec iio_dummy_channels[] = { + /* indexed ADC channel in_voltage0_raw etc */ + { + .type = IIO_VOLTAGE, + /* Channel has a numeric index of 0 */ + .indexed = 1, + .channel = 0, + /* What other information is available? */ + .info_mask_separate = + /* + * in_voltage0_raw + * Raw (unscaled no bias removal etc) measurement + * from the device. + */ + BIT(IIO_CHAN_INFO_RAW) | + /* + * in_voltage0_offset + * Offset for userspace to apply prior to scale + * when converting to standard units (microvolts) + */ + BIT(IIO_CHAN_INFO_OFFSET) | + /* + * in_voltage0_scale + * Multipler for userspace to apply post offset + * when converting to standard units (microvolts) + */ + BIT(IIO_CHAN_INFO_SCALE), + /* + * sampling_frequency + * The frequency in Hz at which the channels are sampled + */ + .info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ), + /* The ordering of elements in the buffer via an enum */ + .scan_index = DUMMY_INDEX_VOLTAGE_0, + .scan_type = { /* Description of storage in buffer */ + .sign = 'u', /* unsigned */ + .realbits = 13, /* 13 bits */ + .storagebits = 16, /* 16 bits used for storage */ + .shift = 0, /* zero shift */ + }, +#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS + .event_spec = &iio_dummy_event, + .num_event_specs = 1, +#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */ + }, + /* Differential ADC channel in_voltage1-voltage2_raw etc*/ + { + .type = IIO_VOLTAGE, + .differential = 1, + /* + * Indexing for differential channels uses channel + * for the positive part, channel2 for the negative. + */ + .indexed = 1, + .channel = 1, + .channel2 = 2, + /* + * in_voltage1-voltage2_raw + * Raw (unscaled no bias removal etc) measurement + * from the device. + */ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + /* + * in_voltage-voltage_scale + * Shared version of scale - shared by differential + * input channels of type IIO_VOLTAGE. + */ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + /* + * sampling_frequency + * The frequency in Hz at which the channels are sampled + */ + .scan_index = DUMMY_INDEX_DIFFVOLTAGE_1M2, + .scan_type = { /* Description of storage in buffer */ + .sign = 's', /* signed */ + .realbits = 12, /* 12 bits */ + .storagebits = 16, /* 16 bits used for storage */ + .shift = 0, /* zero shift */ + }, + }, + /* Differential ADC channel in_voltage3-voltage4_raw etc*/ + { + .type = IIO_VOLTAGE, + .differential = 1, + .indexed = 1, + .channel = 3, + .channel2 = 4, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .scan_index = DUMMY_INDEX_DIFFVOLTAGE_3M4, + .scan_type = { + .sign = 's', + .realbits = 11, + .storagebits = 16, + .shift = 0, + }, + }, + /* + * 'modified' (i.e. axis specified) acceleration channel + * in_accel_z_raw + */ + { + .type = IIO_ACCEL, + .modified = 1, + /* Channel 2 is use for modifiers */ + .channel2 = IIO_MOD_X, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + /* + * Internal bias and gain correction values. Applied + * by the hardware or driver prior to userspace + * seeing the readings. Typically part of hardware + * calibration. + */ + BIT(IIO_CHAN_INFO_CALIBSCALE) | + BIT(IIO_CHAN_INFO_CALIBBIAS), + .info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .scan_index = DUMMY_INDEX_ACCELX, + .scan_type = { /* Description of storage in buffer */ + .sign = 's', /* signed */ + .realbits = 16, /* 16 bits */ + .storagebits = 16, /* 16 bits used for storage */ + .shift = 0, /* zero shift */ + }, + }, + /* + * Convenience macro for timestamps. 4 is the index in + * the buffer. + */ + IIO_CHAN_SOFT_TIMESTAMP(4), + /* DAC channel out_voltage0_raw */ + { + .type = IIO_VOLTAGE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .scan_index = -1, /* No buffer support */ + .output = 1, + .indexed = 1, + .channel = 0, + }, + { + .type = IIO_STEPS, + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_ENABLE) | + BIT(IIO_CHAN_INFO_CALIBHEIGHT), + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .scan_index = -1, /* No buffer support */ +#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS + .event_spec = &step_detect_event, + .num_event_specs = 1, +#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */ + }, + { + .type = IIO_ACTIVITY, + .modified = 1, + .channel2 = IIO_MOD_RUNNING, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .scan_index = -1, /* No buffer support */ +#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS + .event_spec = &iio_running_event, + .num_event_specs = 1, +#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */ + }, + { + .type = IIO_ACTIVITY, + .modified = 1, + .channel2 = IIO_MOD_WALKING, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + .scan_index = -1, /* No buffer support */ +#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS + .event_spec = &iio_walking_event, + .num_event_specs = 1, +#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */ + }, +}; + +/** + * iio_dummy_read_raw() - data read function. + * @indio_dev: the struct iio_dev associated with this device instance + * @chan: the channel whose data is to be read + * @val: first element of returned value (typically INT) + * @val2: second element of returned value (typically MICRO) + * @mask: what we actually want to read as per the info_mask_* + * in iio_chan_spec. + */ +static int iio_dummy_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + struct iio_dummy_state *st = iio_priv(indio_dev); + int ret = -EINVAL; + + mutex_lock(&st->lock); + switch (mask) { + case IIO_CHAN_INFO_RAW: /* magic value - channel value read */ + switch (chan->type) { + case IIO_VOLTAGE: + if (chan->output) { + /* Set integer part to cached value */ + *val = st->dac_val; + ret = IIO_VAL_INT; + } else if (chan->differential) { + if (chan->channel == 1) + *val = st->differential_adc_val[0]; + else + *val = st->differential_adc_val[1]; + ret = IIO_VAL_INT; + } else { + *val = st->single_ended_adc_val; + ret = IIO_VAL_INT; + } + break; + case IIO_ACCEL: + *val = st->accel_val; + ret = IIO_VAL_INT; + break; + default: + break; + } + break; + case IIO_CHAN_INFO_PROCESSED: + switch (chan->type) { + case IIO_STEPS: + *val = st->steps; + ret = IIO_VAL_INT; + break; + case IIO_ACTIVITY: + switch (chan->channel2) { + case IIO_MOD_RUNNING: + *val = st->activity_running; + ret = IIO_VAL_INT; + break; + case IIO_MOD_WALKING: + *val = st->activity_walking; + ret = IIO_VAL_INT; + break; + default: + break; + } + break; + default: + break; + } + break; + case IIO_CHAN_INFO_OFFSET: + /* only single ended adc -> 7 */ + *val = 7; + ret = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_VOLTAGE: + switch (chan->differential) { + case 0: + /* only single ended adc -> 0.001333 */ + *val = 0; + *val2 = 1333; + ret = IIO_VAL_INT_PLUS_MICRO; + break; + case 1: + /* all differential adc -> 0.000001344 */ + *val = 0; + *val2 = 1344; + ret = IIO_VAL_INT_PLUS_NANO; + } + break; + default: + break; + } + break; + case IIO_CHAN_INFO_CALIBBIAS: + /* only the acceleration axis - read from cache */ + *val = st->accel_calibbias; + ret = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_CALIBSCALE: + *val = st->accel_calibscale->val; + *val2 = st->accel_calibscale->val2; + ret = IIO_VAL_INT_PLUS_MICRO; + break; + case IIO_CHAN_INFO_SAMP_FREQ: + *val = 3; + *val2 = 33; + ret = IIO_VAL_INT_PLUS_NANO; + break; + case IIO_CHAN_INFO_ENABLE: + switch (chan->type) { + case IIO_STEPS: + *val = st->steps_enabled; + ret = IIO_VAL_INT; + break; + default: + break; + } + break; + case IIO_CHAN_INFO_CALIBHEIGHT: + switch (chan->type) { + case IIO_STEPS: + *val = st->height; + ret = IIO_VAL_INT; + break; + default: + break; + } + break; + + default: + break; + } + mutex_unlock(&st->lock); + return ret; +} + +/** + * iio_dummy_write_raw() - data write function. + * @indio_dev: the struct iio_dev associated with this device instance + * @chan: the channel whose data is to be written + * @val: first element of value to set (typically INT) + * @val2: second element of value to set (typically MICRO) + * @mask: what we actually want to write as per the info_mask_* + * in iio_chan_spec. + * + * Note that all raw writes are assumed IIO_VAL_INT and info mask elements + * are assumed to be IIO_INT_PLUS_MICRO unless the callback write_raw_get_fmt + * in struct iio_info is provided by the driver. + */ +static int iio_dummy_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + int i; + int ret = 0; + struct iio_dummy_state *st = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_VOLTAGE: + if (chan->output == 0) + return -EINVAL; + + /* Locking not required as writing single value */ + mutex_lock(&st->lock); + st->dac_val = val; + mutex_unlock(&st->lock); + return 0; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_PROCESSED: + switch (chan->type) { + case IIO_STEPS: + mutex_lock(&st->lock); + st->steps = val; + mutex_unlock(&st->lock); + return 0; + case IIO_ACTIVITY: + if (val < 0) + val = 0; + if (val > 100) + val = 100; + switch (chan->channel2) { + case IIO_MOD_RUNNING: + st->activity_running = val; + return 0; + case IIO_MOD_WALKING: + st->activity_walking = val; + return 0; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_CALIBSCALE: + mutex_lock(&st->lock); + /* Compare against table - hard matching here */ + for (i = 0; i < ARRAY_SIZE(dummy_scales); i++) + if (val == dummy_scales[i].val && + val2 == dummy_scales[i].val2) + break; + if (i == ARRAY_SIZE(dummy_scales)) + ret = -EINVAL; + else + st->accel_calibscale = &dummy_scales[i]; + mutex_unlock(&st->lock); + return ret; + case IIO_CHAN_INFO_CALIBBIAS: + mutex_lock(&st->lock); + st->accel_calibbias = val; + mutex_unlock(&st->lock); + return 0; + case IIO_CHAN_INFO_ENABLE: + switch (chan->type) { + case IIO_STEPS: + mutex_lock(&st->lock); + st->steps_enabled = val; + mutex_unlock(&st->lock); + return 0; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_CALIBHEIGHT: + switch (chan->type) { + case IIO_STEPS: + st->height = val; + return 0; + default: + return -EINVAL; + } + + default: + return -EINVAL; + } +} + +/* + * Device type specific information. + */ +static const struct iio_info iio_dummy_info = { + .read_raw = &iio_dummy_read_raw, + .write_raw = &iio_dummy_write_raw, +#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS + .read_event_config = &iio_simple_dummy_read_event_config, + .write_event_config = &iio_simple_dummy_write_event_config, + .read_event_value = &iio_simple_dummy_read_event_value, + .write_event_value = &iio_simple_dummy_write_event_value, +#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */ +}; + +/** + * iio_dummy_init_device() - device instance specific init + * @indio_dev: the iio device structure + * + * Most drivers have one of these to set up default values, + * reset the device to known state etc. + */ +static int iio_dummy_init_device(struct iio_dev *indio_dev) +{ + struct iio_dummy_state *st = iio_priv(indio_dev); + + st->dac_val = 0; + st->single_ended_adc_val = 73; + st->differential_adc_val[0] = 33; + st->differential_adc_val[1] = -34; + st->accel_val = 34; + st->accel_calibbias = -7; + st->accel_calibscale = &dummy_scales[0]; + st->steps = 47; + st->activity_running = 98; + st->activity_walking = 4; + + return 0; +} + +/** + * iio_dummy_probe() - device instance probe + * @name: name of this instance. + * + * Arguments are bus type specific. + * I2C: iio_dummy_probe(struct i2c_client *client, + * const struct i2c_device_id *id) + * SPI: iio_dummy_probe(struct spi_device *spi) + */ +static struct iio_sw_device *iio_dummy_probe(const char *name) +{ + int ret; + struct iio_dev *indio_dev; + struct iio_dummy_state *st; + struct iio_sw_device *swd; + struct device *parent = NULL; + + /* + * With hardware: Set the parent device. + * parent = &spi->dev; + * parent = &client->dev; + */ + + swd = kzalloc(sizeof(*swd), GFP_KERNEL); + if (!swd) + return ERR_PTR(-ENOMEM); + + /* + * Allocate an IIO device. + * + * This structure contains all generic state + * information about the device instance. + * It also has a region (accessed by iio_priv() + * for chip specific state information. + */ + indio_dev = iio_device_alloc(parent, sizeof(*st)); + if (!indio_dev) { + ret = -ENOMEM; + goto error_free_swd; + } + + st = iio_priv(indio_dev); + mutex_init(&st->lock); + + iio_dummy_init_device(indio_dev); + + /* + * Make the iio_dev struct available to remove function. + * Bus equivalents + * i2c_set_clientdata(client, indio_dev); + * spi_set_drvdata(spi, indio_dev); + */ + swd->device = indio_dev; + + /* + * Set the device name. + * + * This is typically a part number and obtained from the module + * id table. + * e.g. for i2c and spi: + * indio_dev->name = id->name; + * indio_dev->name = spi_get_device_id(spi)->name; + */ + indio_dev->name = kstrdup(name, GFP_KERNEL); + if (!indio_dev->name) { + ret = -ENOMEM; + goto error_free_device; + } + + /* Provide description of available channels */ + indio_dev->channels = iio_dummy_channels; + indio_dev->num_channels = ARRAY_SIZE(iio_dummy_channels); + + /* + * Provide device type specific interface functions and + * constant data. + */ + indio_dev->info = &iio_dummy_info; + + /* Specify that device provides sysfs type interfaces */ + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = iio_simple_dummy_events_register(indio_dev); + if (ret < 0) + goto error_free_name; + + ret = iio_simple_dummy_configure_buffer(indio_dev); + if (ret < 0) + goto error_unregister_events; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto error_unconfigure_buffer; + + iio_swd_group_init_type_name(swd, name, &iio_dummy_type); + + return swd; +error_unconfigure_buffer: + iio_simple_dummy_unconfigure_buffer(indio_dev); +error_unregister_events: + iio_simple_dummy_events_unregister(indio_dev); +error_free_name: + kfree(indio_dev->name); +error_free_device: + iio_device_free(indio_dev); +error_free_swd: + kfree(swd); + return ERR_PTR(ret); +} + +/** + * iio_dummy_remove() - device instance removal function + * @swd: pointer to software IIO device abstraction + * + * Parameters follow those of iio_dummy_probe for buses. + */ +static int iio_dummy_remove(struct iio_sw_device *swd) +{ + /* + * Get a pointer to the device instance iio_dev structure + * from the bus subsystem. E.g. + * struct iio_dev *indio_dev = i2c_get_clientdata(client); + * struct iio_dev *indio_dev = spi_get_drvdata(spi); + */ + struct iio_dev *indio_dev = swd->device; + + /* Unregister the device */ + iio_device_unregister(indio_dev); + + /* Device specific code to power down etc */ + + /* Buffered capture related cleanup */ + iio_simple_dummy_unconfigure_buffer(indio_dev); + + iio_simple_dummy_events_unregister(indio_dev); + + /* Free all structures */ + kfree(indio_dev->name); + iio_device_free(indio_dev); + + return 0; +} + +/* + * module_iio_sw_device_driver() - device driver registration + * + * Varies depending on bus type of the device. As there is no device + * here, call probe directly. For information on device registration + * i2c: + * Documentation/i2c/writing-clients.rst + * spi: + * Documentation/spi/spi-summary.rst + */ +static const struct iio_sw_device_ops iio_dummy_device_ops = { + .probe = iio_dummy_probe, + .remove = iio_dummy_remove, +}; + +static struct iio_sw_device_type iio_dummy_device = { + .name = "dummy", + .owner = THIS_MODULE, + .ops = &iio_dummy_device_ops, +}; + +module_iio_sw_device_driver(iio_dummy_device); + +MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>"); +MODULE_DESCRIPTION("IIO dummy driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/dummy/iio_simple_dummy.h b/drivers/iio/dummy/iio_simple_dummy.h new file mode 100644 index 000000000..a91622ac5 --- /dev/null +++ b/drivers/iio/dummy/iio_simple_dummy.h @@ -0,0 +1,126 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/** + * Copyright (c) 2011 Jonathan Cameron + * + * Join together the various functionality of iio_simple_dummy driver + */ + +#ifndef _IIO_SIMPLE_DUMMY_H_ +#define _IIO_SIMPLE_DUMMY_H_ +#include <linux/kernel.h> + +struct iio_dummy_accel_calibscale; +struct iio_dummy_regs; + +/** + * struct iio_dummy_state - device instance specific state. + * @dac_val: cache for dac value + * @single_ended_adc_val: cache for single ended adc value + * @differential_adc_val: cache for differential adc value + * @accel_val: cache for acceleration value + * @accel_calibbias: cache for acceleration calibbias + * @accel_calibscale: cache for acceleration calibscale + * @lock: lock to ensure state is consistent + * @event_irq: irq number for event line (faked) + * @event_val: cache for event threshold value + * @event_en: cache of whether event is enabled + */ +struct iio_dummy_state { + int dac_val; + int single_ended_adc_val; + int differential_adc_val[2]; + int accel_val; + int accel_calibbias; + int activity_running; + int activity_walking; + const struct iio_dummy_accel_calibscale *accel_calibscale; + struct mutex lock; + struct iio_dummy_regs *regs; + int steps_enabled; + int steps; + int height; +#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS + int event_irq; + int event_val; + bool event_en; + s64 event_timestamp; +#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */ +}; + +#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS + +struct iio_dev; + +int iio_simple_dummy_read_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir); + +int iio_simple_dummy_write_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + int state); + +int iio_simple_dummy_read_event_value(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, int *val, + int *val2); + +int iio_simple_dummy_write_event_value(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, int val, + int val2); + +int iio_simple_dummy_events_register(struct iio_dev *indio_dev); +void iio_simple_dummy_events_unregister(struct iio_dev *indio_dev); + +#else /* Stubs for when events are disabled at compile time */ + +static inline int +iio_simple_dummy_events_register(struct iio_dev *indio_dev) +{ + return 0; +} + +static inline void +iio_simple_dummy_events_unregister(struct iio_dev *indio_dev) +{} + +#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS*/ + +/** + * enum iio_simple_dummy_scan_elements - scan index enum + * @DUMMY_INDEX_VOLTAGE_0: the single ended voltage channel + * @DUMMY_INDEX_DIFFVOLTAGE_1M2: first differential channel + * @DUMMY_INDEX_DIFFVOLTAGE_3M4: second differential channel + * @DUMMY_INDEX_ACCELX: acceleration channel + * + * Enum provides convenient numbering for the scan index. + */ +enum iio_simple_dummy_scan_elements { + DUMMY_INDEX_VOLTAGE_0, + DUMMY_INDEX_DIFFVOLTAGE_1M2, + DUMMY_INDEX_DIFFVOLTAGE_3M4, + DUMMY_INDEX_ACCELX, +}; + +#ifdef CONFIG_IIO_SIMPLE_DUMMY_BUFFER +int iio_simple_dummy_configure_buffer(struct iio_dev *indio_dev); +void iio_simple_dummy_unconfigure_buffer(struct iio_dev *indio_dev); +#else +static inline int iio_simple_dummy_configure_buffer(struct iio_dev *indio_dev) +{ + return 0; +} + +static inline +void iio_simple_dummy_unconfigure_buffer(struct iio_dev *indio_dev) +{} + +#endif /* CONFIG_IIO_SIMPLE_DUMMY_BUFFER */ +#endif /* _IIO_SIMPLE_DUMMY_H_ */ diff --git a/drivers/iio/dummy/iio_simple_dummy_buffer.c b/drivers/iio/dummy/iio_simple_dummy_buffer.c new file mode 100644 index 000000000..5512d5edc --- /dev/null +++ b/drivers/iio/dummy/iio_simple_dummy_buffer.c @@ -0,0 +1,174 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2011 Jonathan Cameron + * + * Buffer handling elements of industrial I/O reference driver. + * Uses the kfifo buffer. + * + * To test without hardware use the sysfs trigger. + */ + +#include <linux/kernel.h> +#include <linux/export.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/bitmap.h> + +#include <linux/iio/iio.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/buffer.h> +#include <linux/iio/kfifo_buf.h> + +#include "iio_simple_dummy.h" + +/* Some fake data */ + +static const s16 fakedata[] = { + [DUMMY_INDEX_VOLTAGE_0] = 7, + [DUMMY_INDEX_DIFFVOLTAGE_1M2] = -33, + [DUMMY_INDEX_DIFFVOLTAGE_3M4] = -2, + [DUMMY_INDEX_ACCELX] = 344, +}; + +/** + * iio_simple_dummy_trigger_h() - the trigger handler function + * @irq: the interrupt number + * @p: private data - always a pointer to the poll func. + * + * This is the guts of buffered capture. On a trigger event occurring, + * if the pollfunc is attached then this handler is called as a threaded + * interrupt (and hence may sleep). It is responsible for grabbing data + * from the device and pushing it into the associated buffer. + */ +static irqreturn_t iio_simple_dummy_trigger_h(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + int len = 0; + u16 *data; + + data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); + if (!data) + goto done; + + if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength)) { + /* + * Three common options here: + * hardware scans: certain combinations of channels make + * up a fast read. The capture will consist of all of them. + * Hence we just call the grab data function and fill the + * buffer without processing. + * software scans: can be considered to be random access + * so efficient reading is just a case of minimal bus + * transactions. + * software culled hardware scans: + * occasionally a driver may process the nearest hardware + * scan to avoid storing elements that are not desired. This + * is the fiddliest option by far. + * Here let's pretend we have random access. And the values are + * in the constant table fakedata. + */ + int i, j; + + for (i = 0, j = 0; + i < bitmap_weight(indio_dev->active_scan_mask, + indio_dev->masklength); + i++, j++) { + j = find_next_bit(indio_dev->active_scan_mask, + indio_dev->masklength, j); + /* random access read from the 'device' */ + data[i] = fakedata[j]; + len += 2; + } + } + + iio_push_to_buffers_with_timestamp(indio_dev, data, + iio_get_time_ns(indio_dev)); + + kfree(data); + +done: + /* + * Tell the core we are done with this trigger and ready for the + * next one. + */ + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static const struct iio_buffer_setup_ops iio_simple_dummy_buffer_setup_ops = { +}; + +int iio_simple_dummy_configure_buffer(struct iio_dev *indio_dev) +{ + int ret; + struct iio_buffer *buffer; + + /* Allocate a buffer to use - here a kfifo */ + buffer = iio_kfifo_allocate(); + if (!buffer) { + ret = -ENOMEM; + goto error_ret; + } + + iio_device_attach_buffer(indio_dev, buffer); + + /* + * Tell the core what device type specific functions should + * be run on either side of buffer capture enable / disable. + */ + indio_dev->setup_ops = &iio_simple_dummy_buffer_setup_ops; + + /* + * Configure a polling function. + * When a trigger event with this polling function connected + * occurs, this function is run. Typically this grabs data + * from the device. + * + * NULL for the bottom half. This is normally implemented only if we + * either want to ping a capture now pin (no sleeping) or grab + * a timestamp as close as possible to a data ready trigger firing. + * + * IRQF_ONESHOT ensures irqs are masked such that only one instance + * of the handler can run at a time. + * + * "iio_simple_dummy_consumer%d" formatting string for the irq 'name' + * as seen under /proc/interrupts. Remaining parameters as per printk. + */ + indio_dev->pollfunc = iio_alloc_pollfunc(NULL, + &iio_simple_dummy_trigger_h, + IRQF_ONESHOT, + indio_dev, + "iio_simple_dummy_consumer%d", + indio_dev->id); + + if (!indio_dev->pollfunc) { + ret = -ENOMEM; + goto error_free_buffer; + } + + /* + * Notify the core that this device is capable of buffered capture + * driven by a trigger. + */ + indio_dev->modes |= INDIO_BUFFER_TRIGGERED; + + return 0; + +error_free_buffer: + iio_kfifo_free(indio_dev->buffer); +error_ret: + return ret; +} + +/** + * iio_simple_dummy_unconfigure_buffer() - release buffer resources + * @indio_dev: device instance state + */ +void iio_simple_dummy_unconfigure_buffer(struct iio_dev *indio_dev) +{ + iio_dealloc_pollfunc(indio_dev->pollfunc); + iio_kfifo_free(indio_dev->buffer); +} diff --git a/drivers/iio/dummy/iio_simple_dummy_events.c b/drivers/iio/dummy/iio_simple_dummy_events.c new file mode 100644 index 000000000..63a2b844b --- /dev/null +++ b/drivers/iio/dummy/iio_simple_dummy_events.c @@ -0,0 +1,276 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2011 Jonathan Cameron + * + * Event handling elements of industrial I/O reference driver. + */ +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> +#include "iio_simple_dummy.h" + +/* Evgen 'fakes' interrupt events for this example */ +#include "iio_dummy_evgen.h" + +/** + * iio_simple_dummy_read_event_config() - is event enabled? + * @indio_dev: the device instance data + * @chan: channel for the event whose state is being queried + * @type: type of the event whose state is being queried + * @dir: direction of the vent whose state is being queried + * + * This function would normally query the relevant registers or a cache to + * discover if the event generation is enabled on the device. + */ +int iio_simple_dummy_read_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir) +{ + struct iio_dummy_state *st = iio_priv(indio_dev); + + return st->event_en; +} + +/** + * iio_simple_dummy_write_event_config() - set whether event is enabled + * @indio_dev: the device instance data + * @chan: channel for the event whose state is being set + * @type: type of the event whose state is being set + * @dir: direction of the vent whose state is being set + * @state: whether to enable or disable the device. + * + * This function would normally set the relevant registers on the devices + * so that it generates the specified event. Here it just sets up a cached + * value. + */ +int iio_simple_dummy_write_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + int state) +{ + struct iio_dummy_state *st = iio_priv(indio_dev); + + /* + * Deliberately over the top code splitting to illustrate + * how this is done when multiple events exist. + */ + switch (chan->type) { + case IIO_VOLTAGE: + switch (type) { + case IIO_EV_TYPE_THRESH: + if (dir == IIO_EV_DIR_RISING) + st->event_en = state; + else + return -EINVAL; + break; + default: + return -EINVAL; + } + break; + case IIO_ACTIVITY: + switch (type) { + case IIO_EV_TYPE_THRESH: + st->event_en = state; + break; + default: + return -EINVAL; + } + break; + case IIO_STEPS: + switch (type) { + case IIO_EV_TYPE_CHANGE: + st->event_en = state; + break; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + + return 0; +} + +/** + * iio_simple_dummy_read_event_value() - get value associated with event + * @indio_dev: device instance specific data + * @chan: channel for the event whose value is being read + * @type: type of the event whose value is being read + * @dir: direction of the vent whose value is being read + * @info: info type of the event whose value is being read + * @val: value for the event code. + * @val2: unused + * + * Many devices provide a large set of events of which only a subset may + * be enabled at a time, with value registers whose meaning changes depending + * on the event enabled. This often means that the driver must cache the values + * associated with each possible events so that the right value is in place when + * the enabled event is changed. + */ +int iio_simple_dummy_read_event_value(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int *val, int *val2) +{ + struct iio_dummy_state *st = iio_priv(indio_dev); + + *val = st->event_val; + + return IIO_VAL_INT; +} + +/** + * iio_simple_dummy_write_event_value() - set value associate with event + * @indio_dev: device instance specific data + * @chan: channel for the event whose value is being set + * @type: type of the event whose value is being set + * @dir: direction of the vent whose value is being set + * @info: info type of the event whose value is being set + * @val: the value to be set. + * @val2: unused + */ +int iio_simple_dummy_write_event_value(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int val, int val2) +{ + struct iio_dummy_state *st = iio_priv(indio_dev); + + st->event_val = val; + + return 0; +} + +static irqreturn_t iio_simple_dummy_get_timestamp(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct iio_dummy_state *st = iio_priv(indio_dev); + + st->event_timestamp = iio_get_time_ns(indio_dev); + return IRQ_WAKE_THREAD; +} + +/** + * iio_simple_dummy_event_handler() - identify and pass on event + * @irq: irq of event line + * @private: pointer to device instance state. + * + * This handler is responsible for querying the device to find out what + * event occurred and for then pushing that event towards userspace. + * Here only one event occurs so we push that directly on with locally + * grabbed timestamp. + */ +static irqreturn_t iio_simple_dummy_event_handler(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct iio_dummy_state *st = iio_priv(indio_dev); + + dev_dbg(&indio_dev->dev, "id %x event %x\n", + st->regs->reg_id, st->regs->reg_data); + + switch (st->regs->reg_data) { + case 0: + iio_push_event(indio_dev, + IIO_EVENT_CODE(IIO_VOLTAGE, 0, 0, + IIO_EV_DIR_RISING, + IIO_EV_TYPE_THRESH, 0, 0, 0), + st->event_timestamp); + break; + case 1: + if (st->activity_running > st->event_val) + iio_push_event(indio_dev, + IIO_EVENT_CODE(IIO_ACTIVITY, 0, + IIO_MOD_RUNNING, + IIO_EV_DIR_RISING, + IIO_EV_TYPE_THRESH, + 0, 0, 0), + st->event_timestamp); + break; + case 2: + if (st->activity_walking < st->event_val) + iio_push_event(indio_dev, + IIO_EVENT_CODE(IIO_ACTIVITY, 0, + IIO_MOD_WALKING, + IIO_EV_DIR_FALLING, + IIO_EV_TYPE_THRESH, + 0, 0, 0), + st->event_timestamp); + break; + case 3: + iio_push_event(indio_dev, + IIO_EVENT_CODE(IIO_STEPS, 0, IIO_NO_MOD, + IIO_EV_DIR_NONE, + IIO_EV_TYPE_CHANGE, 0, 0, 0), + st->event_timestamp); + break; + default: + break; + } + + return IRQ_HANDLED; +} + +/** + * iio_simple_dummy_events_register() - setup interrupt handling for events + * @indio_dev: device instance data + * + * This function requests the threaded interrupt to handle the events. + * Normally the irq is a hardware interrupt and the number comes + * from board configuration files. Here we get it from a companion + * module that fakes the interrupt for us. Note that module in + * no way forms part of this example. Just assume that events magically + * appear via the provided interrupt. + */ +int iio_simple_dummy_events_register(struct iio_dev *indio_dev) +{ + struct iio_dummy_state *st = iio_priv(indio_dev); + int ret; + + /* Fire up event source - normally not present */ + st->event_irq = iio_dummy_evgen_get_irq(); + if (st->event_irq < 0) { + ret = st->event_irq; + goto error_ret; + } + st->regs = iio_dummy_evgen_get_regs(st->event_irq); + + ret = request_threaded_irq(st->event_irq, + &iio_simple_dummy_get_timestamp, + &iio_simple_dummy_event_handler, + IRQF_ONESHOT, + "iio_simple_event", + indio_dev); + if (ret < 0) + goto error_free_evgen; + return 0; + +error_free_evgen: + iio_dummy_evgen_release_irq(st->event_irq); +error_ret: + return ret; +} + +/** + * iio_simple_dummy_events_unregister() - tidy up interrupt handling on remove + * @indio_dev: device instance data + */ +void iio_simple_dummy_events_unregister(struct iio_dev *indio_dev) +{ + struct iio_dummy_state *st = iio_priv(indio_dev); + + free_irq(st->event_irq, indio_dev); + /* Not part of normal driver */ + iio_dummy_evgen_release_irq(st->event_irq); +} |