diff options
Diffstat (limited to 'drivers/iio/pressure/Kconfig')
| -rw-r--r-- | drivers/iio/pressure/Kconfig | 264 |
1 files changed, 264 insertions, 0 deletions
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig new file mode 100644 index 000000000..fc0d3cfca --- /dev/null +++ b/drivers/iio/pressure/Kconfig @@ -0,0 +1,264 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Pressure drivers +# +# When adding new entries keep the list in alphabetical order + +menu "Pressure sensors" + +config ABP060MG + tristate "Honeywell ABP pressure sensor driver" + depends on I2C + help + Say yes here to build support for the Honeywell ABP pressure + sensors. + + To compile this driver as a module, choose M here: the module + will be called abp060mg. + +config BMP280 + tristate "Bosch Sensortec BMP180/BMP280 pressure sensor I2C driver" + depends on (I2C || SPI_MASTER) + select REGMAP + select BMP280_I2C if (I2C) + select BMP280_SPI if (SPI_MASTER) + help + Say yes here to build support for Bosch Sensortec BMP180 and BMP280 + pressure and temperature sensors. Also supports the BME280 with + an additional humidity sensor channel. + + To compile this driver as a module, choose M here: the core module + will be called bmp280 and you will also get bmp280-i2c for I2C + and/or bmp280-spi for SPI support. + +config BMP280_I2C + tristate + depends on BMP280 + depends on I2C + select REGMAP_I2C + +config BMP280_SPI + tristate + depends on BMP280 + depends on SPI_MASTER + select REGMAP + +config IIO_CROS_EC_BARO + tristate "ChromeOS EC Barometer Sensor" + depends on IIO_CROS_EC_SENSORS_CORE + help + Say yes here to build support for the Barometer sensor when + presented by the ChromeOS EC Sensor hub. + + To compile this driver as a module, choose M here: the module + will be called cros_ec_baro. + +config DLHL60D + tristate "All Sensors DLHL60D and DLHL60G low voltage digital pressure sensors" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for the All Sensors DLH series + pressure sensors driver. + + To compile this driver as a module, choose M here: the module + will be called dlhl60d. + +config DPS310 + tristate "Infineon DPS310 pressure and temperature sensor" + depends on I2C + select REGMAP_I2C + help + Support for the Infineon DPS310 digital barometric pressure sensor. + It can be accessed over I2C bus. + + This driver can also be built as a module. If so, the module will be + called dps310. + +config HID_SENSOR_PRESS + depends on HID_SENSOR_HUB + select IIO_BUFFER + select HID_SENSOR_IIO_COMMON + select HID_SENSOR_IIO_TRIGGER + tristate "HID PRESS" + help + Say yes here to build support for the HID SENSOR + Pressure driver + + To compile this driver as a module, choose M here: the module + will be called hid-sensor-press. + +config HP03 + tristate "Hope RF HP03 temperature and pressure sensor driver" + depends on I2C + select REGMAP_I2C + help + Say yes here to build support for Hope RF HP03 pressure and + temperature sensor. + + To compile this driver as a module, choose M here: the module + will be called hp03. + +config ICP10100 + tristate "InvenSense ICP-101xx pressure and temperature sensor" + depends on I2C + select CRC8 + help + Say yes here to build support for InvenSense ICP-101xx barometric + pressure and temperature sensor. + + To compile this driver as a module, choose M here: the module + will be called icp10100. + +config MPL115 + tristate + +config MPL115_I2C + tristate "Freescale MPL115A2 pressure sensor driver" + depends on I2C + select MPL115 + help + Say yes here to build support for the Freescale MPL115A2 + pressure sensor connected via I2C. + + To compile this driver as a module, choose M here: the module + will be called mpl115_i2c. + +config MPL115_SPI + tristate "Freescale MPL115A1 pressure sensor driver" + depends on SPI_MASTER + select MPL115 + help + Say yes here to build support for the Freescale MPL115A1 + pressure sensor connected via SPI. + + To compile this driver as a module, choose M here: the module + will be called mpl115_spi. + +config MPL3115 + tristate "Freescale MPL3115A2 pressure sensor driver" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for the Freescale MPL3115A2 + pressure sensor / altimeter. + + To compile this driver as a module, choose M here: the module + will be called mpl3115. + +config MS5611 + tristate "Measurement Specialties MS5611 pressure sensor driver" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here to build support for the Measurement Specialties + MS5611, MS5607 pressure and temperature sensors. + + To compile this driver as a module, choose M here: the module will + be called ms5611_core. + +config MS5611_I2C + tristate "support I2C bus connection" + depends on I2C && MS5611 + help + Say Y here to build I2C bus support for MS5611. + + To compile this driver as a module, choose M here: the module will + be called ms5611_i2c. + +config MS5611_SPI + tristate "support SPI bus connection" + depends on SPI_MASTER && MS5611 + help + Say Y here to build SPI bus support for MS5611. + + To compile this driver as a module, choose M here: the module will + be called ms5611_spi. + +config MS5637 + tristate "Measurement Specialties MS5637 pressure & temperature sensor" + depends on I2C + select IIO_MS_SENSORS_I2C + help + If you say yes here you get support for the Measurement Specialties + MS5637 pressure and temperature sensor. + This driver is also used for MS8607 temperature, pressure & humidity + sensor + + This driver can also be built as a module. If so, the module will + be called ms5637. + +config IIO_ST_PRESS + tristate "STMicroelectronics pressure sensor Driver" + depends on (I2C || SPI_MASTER) && SYSFS + select IIO_ST_SENSORS_CORE + select IIO_ST_PRESS_I2C if (I2C) + select IIO_ST_PRESS_SPI if (SPI_MASTER) + select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) + help + Say yes here to build support for STMicroelectronics pressure + sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB, LPS22HH. + + This driver can also be built as a module. If so, these modules + will be created: + - st_pressure (core functions for the driver [it is mandatory]); + - st_pressure_i2c (necessary for the I2C devices [optional*]); + - st_pressure_spi (necessary for the SPI devices [optional*]); + + (*) one of these is necessary to do something. + +config IIO_ST_PRESS_I2C + tristate + depends on IIO_ST_PRESS + depends on IIO_ST_SENSORS_I2C + +config IIO_ST_PRESS_SPI + tristate + depends on IIO_ST_PRESS + depends on IIO_ST_SENSORS_SPI + +config T5403 + tristate "EPCOS T5403 digital barometric pressure sensor driver" + depends on I2C + help + Say yes here to build support for the EPCOS T5403 pressure sensor + connected via I2C. + + To compile this driver as a module, choose M here: the module + will be called t5403. + +config HP206C + tristate "HOPERF HP206C precision barometer and altimeter sensor" + depends on I2C + help + Say yes here to build support for the HOPREF HP206C precision + barometer and altimeter sensor. + + This driver can also be built as a module. If so, the module will + be called hp206c. + +config ZPA2326 + tristate "Murata ZPA2326 pressure sensor driver" + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select REGMAP + select ZPA2326_I2C if I2C + select ZPA2326_SPI if SPI_MASTER + help + Say Y here to build support for the Murata ZPA2326 pressure and + temperature sensor. + + To compile this driver as a module, choose M here: the module will + be called zpa2326. + +config ZPA2326_I2C + tristate + select REGMAP_I2C + +config ZPA2326_SPI + tristate + select REGMAP_SPI + +endmenu |