diff options
Diffstat (limited to 'drivers/iio/proximity/sx9500.c')
| -rw-r--r-- | drivers/iio/proximity/sx9500.c | 1074 |
1 files changed, 1074 insertions, 0 deletions
diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c new file mode 100644 index 000000000..acb821cba --- /dev/null +++ b/drivers/iio/proximity/sx9500.c @@ -0,0 +1,1074 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2014 Intel Corporation + * + * Driver for Semtech's SX9500 capacitive proximity/button solution. + * Datasheet available at + * <http://www.semtech.com/images/datasheet/sx9500.pdf>. + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/irq.h> +#include <linux/acpi.h> +#include <linux/gpio/consumer.h> +#include <linux/regmap.h> +#include <linux/pm.h> +#include <linux/delay.h> + +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/events.h> +#include <linux/iio/trigger.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> + +#define SX9500_DRIVER_NAME "sx9500" +#define SX9500_IRQ_NAME "sx9500_event" + +/* Register definitions. */ +#define SX9500_REG_IRQ_SRC 0x00 +#define SX9500_REG_STAT 0x01 +#define SX9500_REG_IRQ_MSK 0x03 + +#define SX9500_REG_PROX_CTRL0 0x06 +#define SX9500_REG_PROX_CTRL1 0x07 +#define SX9500_REG_PROX_CTRL2 0x08 +#define SX9500_REG_PROX_CTRL3 0x09 +#define SX9500_REG_PROX_CTRL4 0x0a +#define SX9500_REG_PROX_CTRL5 0x0b +#define SX9500_REG_PROX_CTRL6 0x0c +#define SX9500_REG_PROX_CTRL7 0x0d +#define SX9500_REG_PROX_CTRL8 0x0e + +#define SX9500_REG_SENSOR_SEL 0x20 +#define SX9500_REG_USE_MSB 0x21 +#define SX9500_REG_USE_LSB 0x22 +#define SX9500_REG_AVG_MSB 0x23 +#define SX9500_REG_AVG_LSB 0x24 +#define SX9500_REG_DIFF_MSB 0x25 +#define SX9500_REG_DIFF_LSB 0x26 +#define SX9500_REG_OFFSET_MSB 0x27 +#define SX9500_REG_OFFSET_LSB 0x28 + +#define SX9500_REG_RESET 0x7f + +/* Write this to REG_RESET to do a soft reset. */ +#define SX9500_SOFT_RESET 0xde + +#define SX9500_SCAN_PERIOD_MASK GENMASK(6, 4) +#define SX9500_SCAN_PERIOD_SHIFT 4 + +/* + * These serve for identifying IRQ source in the IRQ_SRC register, and + * also for masking the IRQs in the IRQ_MSK register. + */ +#define SX9500_CLOSE_IRQ BIT(6) +#define SX9500_FAR_IRQ BIT(5) +#define SX9500_CONVDONE_IRQ BIT(3) + +#define SX9500_PROXSTAT_SHIFT 4 +#define SX9500_COMPSTAT_MASK GENMASK(3, 0) + +#define SX9500_NUM_CHANNELS 4 +#define SX9500_CHAN_MASK GENMASK(SX9500_NUM_CHANNELS - 1, 0) + +struct sx9500_data { + struct mutex mutex; + struct i2c_client *client; + struct iio_trigger *trig; + struct regmap *regmap; + struct gpio_desc *gpiod_rst; + /* + * Last reading of the proximity status for each channel. We + * only send an event to user space when this changes. + */ + bool prox_stat[SX9500_NUM_CHANNELS]; + bool event_enabled[SX9500_NUM_CHANNELS]; + bool trigger_enabled; + u16 *buffer; + /* Remember enabled channels and sample rate during suspend. */ + unsigned int suspend_ctrl0; + struct completion completion; + int data_rdy_users, close_far_users; + int channel_users[SX9500_NUM_CHANNELS]; +}; + +static const struct iio_event_spec sx9500_events[] = { + { + .type = IIO_EV_TYPE_THRESH, + .dir = IIO_EV_DIR_EITHER, + .mask_separate = BIT(IIO_EV_INFO_ENABLE), + }, +}; + +#define SX9500_CHANNEL(idx) \ + { \ + .type = IIO_PROXIMITY, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .indexed = 1, \ + .channel = idx, \ + .event_spec = sx9500_events, \ + .num_event_specs = ARRAY_SIZE(sx9500_events), \ + .scan_index = idx, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 16, \ + .storagebits = 16, \ + .shift = 0, \ + }, \ + } + +static const struct iio_chan_spec sx9500_channels[] = { + SX9500_CHANNEL(0), + SX9500_CHANNEL(1), + SX9500_CHANNEL(2), + SX9500_CHANNEL(3), + IIO_CHAN_SOFT_TIMESTAMP(4), +}; + +static const struct { + int val; + int val2; +} sx9500_samp_freq_table[] = { + {33, 333333}, + {16, 666666}, + {11, 111111}, + {8, 333333}, + {6, 666666}, + {5, 0}, + {3, 333333}, + {2, 500000}, +}; + +static const unsigned int sx9500_scan_period_table[] = { + 30, 60, 90, 120, 150, 200, 300, 400, +}; + +static const struct regmap_range sx9500_writable_reg_ranges[] = { + regmap_reg_range(SX9500_REG_IRQ_MSK, SX9500_REG_IRQ_MSK), + regmap_reg_range(SX9500_REG_PROX_CTRL0, SX9500_REG_PROX_CTRL8), + regmap_reg_range(SX9500_REG_SENSOR_SEL, SX9500_REG_SENSOR_SEL), + regmap_reg_range(SX9500_REG_OFFSET_MSB, SX9500_REG_OFFSET_LSB), + regmap_reg_range(SX9500_REG_RESET, SX9500_REG_RESET), +}; + +static const struct regmap_access_table sx9500_writeable_regs = { + .yes_ranges = sx9500_writable_reg_ranges, + .n_yes_ranges = ARRAY_SIZE(sx9500_writable_reg_ranges), +}; + +/* + * All allocated registers are readable, so we just list unallocated + * ones. + */ +static const struct regmap_range sx9500_non_readable_reg_ranges[] = { + regmap_reg_range(SX9500_REG_STAT + 1, SX9500_REG_STAT + 1), + regmap_reg_range(SX9500_REG_IRQ_MSK + 1, SX9500_REG_PROX_CTRL0 - 1), + regmap_reg_range(SX9500_REG_PROX_CTRL8 + 1, SX9500_REG_SENSOR_SEL - 1), + regmap_reg_range(SX9500_REG_OFFSET_LSB + 1, SX9500_REG_RESET - 1), +}; + +static const struct regmap_access_table sx9500_readable_regs = { + .no_ranges = sx9500_non_readable_reg_ranges, + .n_no_ranges = ARRAY_SIZE(sx9500_non_readable_reg_ranges), +}; + +static const struct regmap_range sx9500_volatile_reg_ranges[] = { + regmap_reg_range(SX9500_REG_IRQ_SRC, SX9500_REG_STAT), + regmap_reg_range(SX9500_REG_USE_MSB, SX9500_REG_OFFSET_LSB), + regmap_reg_range(SX9500_REG_RESET, SX9500_REG_RESET), +}; + +static const struct regmap_access_table sx9500_volatile_regs = { + .yes_ranges = sx9500_volatile_reg_ranges, + .n_yes_ranges = ARRAY_SIZE(sx9500_volatile_reg_ranges), +}; + +static const struct regmap_config sx9500_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = SX9500_REG_RESET, + .cache_type = REGCACHE_RBTREE, + + .wr_table = &sx9500_writeable_regs, + .rd_table = &sx9500_readable_regs, + .volatile_table = &sx9500_volatile_regs, +}; + +static int sx9500_inc_users(struct sx9500_data *data, int *counter, + unsigned int reg, unsigned int bitmask) +{ + (*counter)++; + if (*counter != 1) + /* Bit is already active, nothing to do. */ + return 0; + + return regmap_update_bits(data->regmap, reg, bitmask, bitmask); +} + +static int sx9500_dec_users(struct sx9500_data *data, int *counter, + unsigned int reg, unsigned int bitmask) +{ + (*counter)--; + if (*counter != 0) + /* There are more users, do not deactivate. */ + return 0; + + return regmap_update_bits(data->regmap, reg, bitmask, 0); +} + +static int sx9500_inc_chan_users(struct sx9500_data *data, int chan) +{ + return sx9500_inc_users(data, &data->channel_users[chan], + SX9500_REG_PROX_CTRL0, BIT(chan)); +} + +static int sx9500_dec_chan_users(struct sx9500_data *data, int chan) +{ + return sx9500_dec_users(data, &data->channel_users[chan], + SX9500_REG_PROX_CTRL0, BIT(chan)); +} + +static int sx9500_inc_data_rdy_users(struct sx9500_data *data) +{ + return sx9500_inc_users(data, &data->data_rdy_users, + SX9500_REG_IRQ_MSK, SX9500_CONVDONE_IRQ); +} + +static int sx9500_dec_data_rdy_users(struct sx9500_data *data) +{ + return sx9500_dec_users(data, &data->data_rdy_users, + SX9500_REG_IRQ_MSK, SX9500_CONVDONE_IRQ); +} + +static int sx9500_inc_close_far_users(struct sx9500_data *data) +{ + return sx9500_inc_users(data, &data->close_far_users, + SX9500_REG_IRQ_MSK, + SX9500_CLOSE_IRQ | SX9500_FAR_IRQ); +} + +static int sx9500_dec_close_far_users(struct sx9500_data *data) +{ + return sx9500_dec_users(data, &data->close_far_users, + SX9500_REG_IRQ_MSK, + SX9500_CLOSE_IRQ | SX9500_FAR_IRQ); +} + +static int sx9500_read_prox_data(struct sx9500_data *data, + const struct iio_chan_spec *chan, + int *val) +{ + int ret; + __be16 regval; + + ret = regmap_write(data->regmap, SX9500_REG_SENSOR_SEL, chan->channel); + if (ret < 0) + return ret; + + ret = regmap_bulk_read(data->regmap, SX9500_REG_USE_MSB, ®val, 2); + if (ret < 0) + return ret; + + *val = be16_to_cpu(regval); + + return IIO_VAL_INT; +} + +/* + * If we have no interrupt support, we have to wait for a scan period + * after enabling a channel to get a result. + */ +static int sx9500_wait_for_sample(struct sx9500_data *data) +{ + int ret; + unsigned int val; + + ret = regmap_read(data->regmap, SX9500_REG_PROX_CTRL0, &val); + if (ret < 0) + return ret; + + val = (val & SX9500_SCAN_PERIOD_MASK) >> SX9500_SCAN_PERIOD_SHIFT; + + msleep(sx9500_scan_period_table[val]); + + return 0; +} + +static int sx9500_read_proximity(struct sx9500_data *data, + const struct iio_chan_spec *chan, + int *val) +{ + int ret; + + mutex_lock(&data->mutex); + + ret = sx9500_inc_chan_users(data, chan->channel); + if (ret < 0) + goto out; + + ret = sx9500_inc_data_rdy_users(data); + if (ret < 0) + goto out_dec_chan; + + mutex_unlock(&data->mutex); + + if (data->client->irq > 0) + ret = wait_for_completion_interruptible(&data->completion); + else + ret = sx9500_wait_for_sample(data); + + mutex_lock(&data->mutex); + + if (ret < 0) + goto out_dec_data_rdy; + + ret = sx9500_read_prox_data(data, chan, val); + if (ret < 0) + goto out_dec_data_rdy; + + ret = sx9500_dec_data_rdy_users(data); + if (ret < 0) + goto out_dec_chan; + + ret = sx9500_dec_chan_users(data, chan->channel); + if (ret < 0) + goto out; + + ret = IIO_VAL_INT; + + goto out; + +out_dec_data_rdy: + sx9500_dec_data_rdy_users(data); +out_dec_chan: + sx9500_dec_chan_users(data, chan->channel); +out: + mutex_unlock(&data->mutex); + reinit_completion(&data->completion); + + return ret; +} + +static int sx9500_read_samp_freq(struct sx9500_data *data, + int *val, int *val2) +{ + int ret; + unsigned int regval; + + mutex_lock(&data->mutex); + ret = regmap_read(data->regmap, SX9500_REG_PROX_CTRL0, ®val); + mutex_unlock(&data->mutex); + + if (ret < 0) + return ret; + + regval = (regval & SX9500_SCAN_PERIOD_MASK) >> SX9500_SCAN_PERIOD_SHIFT; + *val = sx9500_samp_freq_table[regval].val; + *val2 = sx9500_samp_freq_table[regval].val2; + + return IIO_VAL_INT_PLUS_MICRO; +} + +static int sx9500_read_raw(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + int *val, int *val2, long mask) +{ + struct sx9500_data *data = iio_priv(indio_dev); + int ret; + + switch (chan->type) { + case IIO_PROXIMITY: + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + ret = sx9500_read_proximity(data, chan, val); + iio_device_release_direct_mode(indio_dev); + return ret; + case IIO_CHAN_INFO_SAMP_FREQ: + return sx9500_read_samp_freq(data, val, val2); + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static int sx9500_set_samp_freq(struct sx9500_data *data, + int val, int val2) +{ + int i, ret; + + for (i = 0; i < ARRAY_SIZE(sx9500_samp_freq_table); i++) + if (val == sx9500_samp_freq_table[i].val && + val2 == sx9500_samp_freq_table[i].val2) + break; + + if (i == ARRAY_SIZE(sx9500_samp_freq_table)) + return -EINVAL; + + mutex_lock(&data->mutex); + + ret = regmap_update_bits(data->regmap, SX9500_REG_PROX_CTRL0, + SX9500_SCAN_PERIOD_MASK, + i << SX9500_SCAN_PERIOD_SHIFT); + + mutex_unlock(&data->mutex); + + return ret; +} + +static int sx9500_write_raw(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + int val, int val2, long mask) +{ + struct sx9500_data *data = iio_priv(indio_dev); + + switch (chan->type) { + case IIO_PROXIMITY: + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + return sx9500_set_samp_freq(data, val, val2); + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static irqreturn_t sx9500_irq_handler(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct sx9500_data *data = iio_priv(indio_dev); + + if (data->trigger_enabled) + iio_trigger_poll(data->trig); + + /* + * Even if no event is enabled, we need to wake the thread to + * clear the interrupt state by reading SX9500_REG_IRQ_SRC. It + * is not possible to do that here because regmap_read takes a + * mutex. + */ + return IRQ_WAKE_THREAD; +} + +static void sx9500_push_events(struct iio_dev *indio_dev) +{ + int ret; + unsigned int val, chan; + struct sx9500_data *data = iio_priv(indio_dev); + + ret = regmap_read(data->regmap, SX9500_REG_STAT, &val); + if (ret < 0) { + dev_err(&data->client->dev, "i2c transfer error in irq\n"); + return; + } + + val >>= SX9500_PROXSTAT_SHIFT; + for (chan = 0; chan < SX9500_NUM_CHANNELS; chan++) { + int dir; + u64 ev; + bool new_prox = val & BIT(chan); + + if (!data->event_enabled[chan]) + continue; + if (new_prox == data->prox_stat[chan]) + /* No change on this channel. */ + continue; + + dir = new_prox ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING; + ev = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, chan, + IIO_EV_TYPE_THRESH, dir); + iio_push_event(indio_dev, ev, iio_get_time_ns(indio_dev)); + data->prox_stat[chan] = new_prox; + } +} + +static irqreturn_t sx9500_irq_thread_handler(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct sx9500_data *data = iio_priv(indio_dev); + int ret; + unsigned int val; + + mutex_lock(&data->mutex); + + ret = regmap_read(data->regmap, SX9500_REG_IRQ_SRC, &val); + if (ret < 0) { + dev_err(&data->client->dev, "i2c transfer error in irq\n"); + goto out; + } + + if (val & (SX9500_CLOSE_IRQ | SX9500_FAR_IRQ)) + sx9500_push_events(indio_dev); + + if (val & SX9500_CONVDONE_IRQ) + complete(&data->completion); + +out: + mutex_unlock(&data->mutex); + + return IRQ_HANDLED; +} + +static int sx9500_read_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir) +{ + struct sx9500_data *data = iio_priv(indio_dev); + + if (chan->type != IIO_PROXIMITY || type != IIO_EV_TYPE_THRESH || + dir != IIO_EV_DIR_EITHER) + return -EINVAL; + + return data->event_enabled[chan->channel]; +} + +static int sx9500_write_event_config(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + int state) +{ + struct sx9500_data *data = iio_priv(indio_dev); + int ret; + + if (chan->type != IIO_PROXIMITY || type != IIO_EV_TYPE_THRESH || + dir != IIO_EV_DIR_EITHER) + return -EINVAL; + + mutex_lock(&data->mutex); + + if (state == 1) { + ret = sx9500_inc_chan_users(data, chan->channel); + if (ret < 0) + goto out_unlock; + ret = sx9500_inc_close_far_users(data); + if (ret < 0) + goto out_undo_chan; + } else { + ret = sx9500_dec_chan_users(data, chan->channel); + if (ret < 0) + goto out_unlock; + ret = sx9500_dec_close_far_users(data); + if (ret < 0) + goto out_undo_chan; + } + + data->event_enabled[chan->channel] = state; + goto out_unlock; + +out_undo_chan: + if (state == 1) + sx9500_dec_chan_users(data, chan->channel); + else + sx9500_inc_chan_users(data, chan->channel); +out_unlock: + mutex_unlock(&data->mutex); + return ret; +} + +static int sx9500_update_scan_mode(struct iio_dev *indio_dev, + const unsigned long *scan_mask) +{ + struct sx9500_data *data = iio_priv(indio_dev); + + mutex_lock(&data->mutex); + kfree(data->buffer); + data->buffer = kzalloc(indio_dev->scan_bytes, GFP_KERNEL); + mutex_unlock(&data->mutex); + + if (data->buffer == NULL) + return -ENOMEM; + + return 0; +} + +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( + "2.500000 3.333333 5 6.666666 8.333333 11.111111 16.666666 33.333333"); + +static struct attribute *sx9500_attributes[] = { + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group sx9500_attribute_group = { + .attrs = sx9500_attributes, +}; + +static const struct iio_info sx9500_info = { + .attrs = &sx9500_attribute_group, + .read_raw = &sx9500_read_raw, + .write_raw = &sx9500_write_raw, + .read_event_config = &sx9500_read_event_config, + .write_event_config = &sx9500_write_event_config, + .update_scan_mode = &sx9500_update_scan_mode, +}; + +static int sx9500_set_trigger_state(struct iio_trigger *trig, + bool state) +{ + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); + struct sx9500_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->mutex); + + if (state) + ret = sx9500_inc_data_rdy_users(data); + else + ret = sx9500_dec_data_rdy_users(data); + if (ret < 0) + goto out; + + data->trigger_enabled = state; + +out: + mutex_unlock(&data->mutex); + + return ret; +} + +static const struct iio_trigger_ops sx9500_trigger_ops = { + .set_trigger_state = sx9500_set_trigger_state, +}; + +static irqreturn_t sx9500_trigger_handler(int irq, void *private) +{ + struct iio_poll_func *pf = private; + struct iio_dev *indio_dev = pf->indio_dev; + struct sx9500_data *data = iio_priv(indio_dev); + int val, bit, ret, i = 0; + + mutex_lock(&data->mutex); + + for_each_set_bit(bit, indio_dev->active_scan_mask, + indio_dev->masklength) { + ret = sx9500_read_prox_data(data, &indio_dev->channels[bit], + &val); + if (ret < 0) + goto out; + + data->buffer[i++] = val; + } + + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, + iio_get_time_ns(indio_dev)); + +out: + mutex_unlock(&data->mutex); + + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int sx9500_buffer_postenable(struct iio_dev *indio_dev) +{ + struct sx9500_data *data = iio_priv(indio_dev); + int ret = 0, i; + + mutex_lock(&data->mutex); + + for (i = 0; i < SX9500_NUM_CHANNELS; i++) + if (test_bit(i, indio_dev->active_scan_mask)) { + ret = sx9500_inc_chan_users(data, i); + if (ret) + break; + } + + if (ret) + for (i = i - 1; i >= 0; i--) + if (test_bit(i, indio_dev->active_scan_mask)) + sx9500_dec_chan_users(data, i); + + mutex_unlock(&data->mutex); + + return ret; +} + +static int sx9500_buffer_predisable(struct iio_dev *indio_dev) +{ + struct sx9500_data *data = iio_priv(indio_dev); + int ret = 0, i; + + mutex_lock(&data->mutex); + + for (i = 0; i < SX9500_NUM_CHANNELS; i++) + if (test_bit(i, indio_dev->active_scan_mask)) { + ret = sx9500_dec_chan_users(data, i); + if (ret) + break; + } + + if (ret) + for (i = i - 1; i >= 0; i--) + if (test_bit(i, indio_dev->active_scan_mask)) + sx9500_inc_chan_users(data, i); + + mutex_unlock(&data->mutex); + + return ret; +} + +static const struct iio_buffer_setup_ops sx9500_buffer_setup_ops = { + .postenable = sx9500_buffer_postenable, + .predisable = sx9500_buffer_predisable, +}; + +struct sx9500_reg_default { + u8 reg; + u8 def; +}; + +static const struct sx9500_reg_default sx9500_default_regs[] = { + { + .reg = SX9500_REG_PROX_CTRL1, + /* Shield enabled, small range. */ + .def = 0x43, + }, + { + .reg = SX9500_REG_PROX_CTRL2, + /* x8 gain, 167kHz frequency, finest resolution. */ + .def = 0x77, + }, + { + .reg = SX9500_REG_PROX_CTRL3, + /* Doze enabled, 2x scan period doze, no raw filter. */ + .def = 0x40, + }, + { + .reg = SX9500_REG_PROX_CTRL4, + /* Average threshold. */ + .def = 0x30, + }, + { + .reg = SX9500_REG_PROX_CTRL5, + /* + * Debouncer off, lowest average negative filter, + * highest average postive filter. + */ + .def = 0x0f, + }, + { + .reg = SX9500_REG_PROX_CTRL6, + /* Proximity detection threshold: 280 */ + .def = 0x0e, + }, + { + .reg = SX9500_REG_PROX_CTRL7, + /* + * No automatic compensation, compensate each pin + * independently, proximity hysteresis: 32, close + * debouncer off, far debouncer off. + */ + .def = 0x00, + }, + { + .reg = SX9500_REG_PROX_CTRL8, + /* No stuck timeout, no periodic compensation. */ + .def = 0x00, + }, + { + .reg = SX9500_REG_PROX_CTRL0, + /* Scan period: 30ms, all sensors disabled. */ + .def = 0x00, + }, +}; + +/* Activate all channels and perform an initial compensation. */ +static int sx9500_init_compensation(struct iio_dev *indio_dev) +{ + struct sx9500_data *data = iio_priv(indio_dev); + int i, ret; + unsigned int val; + + ret = regmap_update_bits(data->regmap, SX9500_REG_PROX_CTRL0, + SX9500_CHAN_MASK, SX9500_CHAN_MASK); + if (ret < 0) + return ret; + + for (i = 10; i >= 0; i--) { + usleep_range(10000, 20000); + ret = regmap_read(data->regmap, SX9500_REG_STAT, &val); + if (ret < 0) + goto out; + if (!(val & SX9500_COMPSTAT_MASK)) + break; + } + + if (i < 0) { + dev_err(&data->client->dev, "initial compensation timed out"); + ret = -ETIMEDOUT; + } + +out: + regmap_update_bits(data->regmap, SX9500_REG_PROX_CTRL0, + SX9500_CHAN_MASK, 0); + return ret; +} + +static int sx9500_init_device(struct iio_dev *indio_dev) +{ + struct sx9500_data *data = iio_priv(indio_dev); + int ret, i; + unsigned int val; + + if (data->gpiod_rst) { + gpiod_set_value_cansleep(data->gpiod_rst, 0); + usleep_range(1000, 2000); + gpiod_set_value_cansleep(data->gpiod_rst, 1); + usleep_range(1000, 2000); + } + + ret = regmap_write(data->regmap, SX9500_REG_IRQ_MSK, 0); + if (ret < 0) + return ret; + + ret = regmap_write(data->regmap, SX9500_REG_RESET, + SX9500_SOFT_RESET); + if (ret < 0) + return ret; + + ret = regmap_read(data->regmap, SX9500_REG_IRQ_SRC, &val); + if (ret < 0) + return ret; + + for (i = 0; i < ARRAY_SIZE(sx9500_default_regs); i++) { + ret = regmap_write(data->regmap, + sx9500_default_regs[i].reg, + sx9500_default_regs[i].def); + if (ret < 0) + return ret; + } + + return sx9500_init_compensation(indio_dev); +} + +static const struct acpi_gpio_params reset_gpios = { 0, 0, false }; +static const struct acpi_gpio_params interrupt_gpios = { 2, 0, false }; + +static const struct acpi_gpio_mapping acpi_sx9500_gpios[] = { + { "reset-gpios", &reset_gpios, 1 }, + /* + * Some platforms have a bug in ACPI GPIO description making IRQ + * GPIO to be output only. Ask the GPIO core to ignore this limit. + */ + { "interrupt-gpios", &interrupt_gpios, 1, ACPI_GPIO_QUIRK_NO_IO_RESTRICTION }, + { }, +}; + +static void sx9500_gpio_probe(struct i2c_client *client, + struct sx9500_data *data) +{ + struct gpio_desc *gpiod_int; + struct device *dev; + int ret; + + if (!client) + return; + + dev = &client->dev; + + ret = devm_acpi_dev_add_driver_gpios(dev, acpi_sx9500_gpios); + if (ret) + dev_dbg(dev, "Unable to add GPIO mapping table\n"); + + if (client->irq <= 0) { + gpiod_int = devm_gpiod_get(dev, "interrupt", GPIOD_IN); + if (IS_ERR(gpiod_int)) + dev_err(dev, "gpio get irq failed\n"); + else + client->irq = gpiod_to_irq(gpiod_int); + } + + data->gpiod_rst = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(data->gpiod_rst)) { + dev_warn(dev, "gpio get reset pin failed\n"); + data->gpiod_rst = NULL; + } +} + +static int sx9500_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct iio_dev *indio_dev; + struct sx9500_data *data; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (indio_dev == NULL) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->client = client; + mutex_init(&data->mutex); + init_completion(&data->completion); + data->trigger_enabled = false; + + data->regmap = devm_regmap_init_i2c(client, &sx9500_regmap_config); + if (IS_ERR(data->regmap)) + return PTR_ERR(data->regmap); + + indio_dev->name = SX9500_DRIVER_NAME; + indio_dev->channels = sx9500_channels; + indio_dev->num_channels = ARRAY_SIZE(sx9500_channels); + indio_dev->info = &sx9500_info; + indio_dev->modes = INDIO_DIRECT_MODE; + i2c_set_clientdata(client, indio_dev); + + sx9500_gpio_probe(client, data); + + ret = sx9500_init_device(indio_dev); + if (ret < 0) + return ret; + + if (client->irq <= 0) + dev_warn(&client->dev, "no valid irq found\n"); + else { + ret = devm_request_threaded_irq(&client->dev, client->irq, + sx9500_irq_handler, sx9500_irq_thread_handler, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + SX9500_IRQ_NAME, indio_dev); + if (ret < 0) + return ret; + + data->trig = devm_iio_trigger_alloc(&client->dev, + "%s-dev%d", indio_dev->name, indio_dev->id); + if (!data->trig) + return -ENOMEM; + + data->trig->dev.parent = &client->dev; + data->trig->ops = &sx9500_trigger_ops; + iio_trigger_set_drvdata(data->trig, indio_dev); + + ret = iio_trigger_register(data->trig); + if (ret) + return ret; + } + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + sx9500_trigger_handler, + &sx9500_buffer_setup_ops); + if (ret < 0) + goto out_trigger_unregister; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto out_buffer_cleanup; + + return 0; + +out_buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); +out_trigger_unregister: + if (client->irq > 0) + iio_trigger_unregister(data->trig); + + return ret; +} + +static int sx9500_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct sx9500_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + if (client->irq > 0) + iio_trigger_unregister(data->trig); + kfree(data->buffer); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int sx9500_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct sx9500_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->mutex); + ret = regmap_read(data->regmap, SX9500_REG_PROX_CTRL0, + &data->suspend_ctrl0); + if (ret < 0) + goto out; + + /* + * Scan period doesn't matter because when all the sensors are + * deactivated the device is in sleep mode. + */ + ret = regmap_write(data->regmap, SX9500_REG_PROX_CTRL0, 0); + +out: + mutex_unlock(&data->mutex); + return ret; +} + +static int sx9500_resume(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct sx9500_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->mutex); + ret = regmap_write(data->regmap, SX9500_REG_PROX_CTRL0, + data->suspend_ctrl0); + mutex_unlock(&data->mutex); + + return ret; +} +#endif /* CONFIG_PM_SLEEP */ + +static const struct dev_pm_ops sx9500_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(sx9500_suspend, sx9500_resume) +}; + +static const struct acpi_device_id sx9500_acpi_match[] = { + {"SSX9500", 0}, + {"SASX9500", 0}, + { }, +}; +MODULE_DEVICE_TABLE(acpi, sx9500_acpi_match); + +static const struct of_device_id sx9500_of_match[] = { + { .compatible = "semtech,sx9500", }, + { } +}; +MODULE_DEVICE_TABLE(of, sx9500_of_match); + +static const struct i2c_device_id sx9500_id[] = { + {"sx9500", 0}, + { }, +}; +MODULE_DEVICE_TABLE(i2c, sx9500_id); + +static struct i2c_driver sx9500_driver = { + .driver = { + .name = SX9500_DRIVER_NAME, + .acpi_match_table = ACPI_PTR(sx9500_acpi_match), + .of_match_table = of_match_ptr(sx9500_of_match), + .pm = &sx9500_pm_ops, + }, + .probe = sx9500_probe, + .remove = sx9500_remove, + .id_table = sx9500_id, +}; +module_i2c_driver(sx9500_driver); + +MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>"); +MODULE_DESCRIPTION("Driver for Semtech SX9500 proximity sensor"); +MODULE_LICENSE("GPL v2"); |