diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/input/misc/soc_button_array.c | 603 |
1 files changed, 603 insertions, 0 deletions
diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c new file mode 100644 index 000000000..b9ef03af5 --- /dev/null +++ b/drivers/input/misc/soc_button_array.c @@ -0,0 +1,603 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Supports for the button array on SoC tablets originally running + * Windows 8. + * + * (C) Copyright 2014 Intel Corporation + */ + +#include <linux/module.h> +#include <linux/input.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/acpi.h> +#include <linux/dmi.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio_keys.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> + +static bool use_low_level_irq; +module_param(use_low_level_irq, bool, 0444); +MODULE_PARM_DESC(use_low_level_irq, "Use low-level triggered IRQ instead of edge triggered"); + +struct soc_button_info { + const char *name; + int acpi_index; + unsigned int event_type; + unsigned int event_code; + bool autorepeat; + bool wakeup; + bool active_low; +}; + +struct soc_device_data { + const struct soc_button_info *button_info; + int (*check)(struct device *dev); +}; + +/* + * Some of the buttons like volume up/down are auto repeat, while others + * are not. To support both, we register two platform devices, and put + * buttons into them based on whether the key should be auto repeat. + */ +#define BUTTON_TYPES 2 + +struct soc_button_data { + struct platform_device *children[BUTTON_TYPES]; +}; + +/* + * Some 2-in-1s which use the soc_button_array driver have this ugly issue in + * their DSDT where the _LID method modifies the irq-type settings of the GPIOs + * used for the power and home buttons. The intend of this AML code is to + * disable these buttons when the lid is closed. + * The AML does this by directly poking the GPIO controllers registers. This is + * problematic because when re-enabling the irq, which happens whenever _LID + * gets called with the lid open (e.g. on boot and on resume), it sets the + * irq-type to IRQ_TYPE_LEVEL_LOW. Where as the gpio-keys driver programs the + * type to, and expects it to be, IRQ_TYPE_EDGE_BOTH. + * To work around this we don't set gpio_keys_button.gpio on these 2-in-1s, + * instead we get the irq for the GPIO ourselves, configure it as + * IRQ_TYPE_LEVEL_LOW (to match how the _LID AML code configures it) and pass + * the irq in gpio_keys_button.irq. Below is a list of affected devices. + */ +static const struct dmi_system_id dmi_use_low_level_irq[] = { + { + /* + * Acer Switch 10 SW5-012. _LID method messes with home- and + * power-button GPIO IRQ settings. When (re-)enabling the irq + * it ors in its own flags without clearing the previous set + * ones, leading to an irq-type of IRQ_TYPE_LEVEL_LOW | + * IRQ_TYPE_LEVEL_HIGH causing a continuous interrupt storm. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"), + }, + }, + { + /* Acer Switch V 10 SW5-017, same issue as Acer Switch 10 SW5-012. */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "SW5-017"), + }, + }, + { + /* + * Acer One S1003. _LID method messes with power-button GPIO + * IRQ settings, leading to a non working power-button. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "One S1003"), + }, + }, + { + /* + * Lenovo Yoga Tab2 1051F/1051L, something messes with the home-button + * IRQ settings, leading to a non working home-button. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "60073"), + DMI_MATCH(DMI_PRODUCT_VERSION, "1051"), + }, + }, + {} /* Terminating entry */ +}; + +/* + * Some devices have a wrong entry which points to a GPIO which is + * required in another driver, so this driver must not claim it. + */ +static const struct dmi_system_id dmi_invalid_acpi_index[] = { + { + /* + * Lenovo Yoga Book X90F / X90L, the PNP0C40 home button entry + * points to a GPIO which is not a home button and which is + * required by the lenovo-yogabook driver. + */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Intel Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "CHERRYVIEW D1 PLATFORM"), + DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "YETI-11"), + }, + .driver_data = (void *)1l, + }, + {} /* Terminating entry */ +}; + +/* + * Get the Nth GPIO number from the ACPI object. + */ +static int soc_button_lookup_gpio(struct device *dev, int acpi_index, + int *gpio_ret, int *irq_ret) +{ + struct gpio_desc *desc; + + desc = gpiod_get_index(dev, NULL, acpi_index, GPIOD_ASIS); + if (IS_ERR(desc)) + return PTR_ERR(desc); + + *gpio_ret = desc_to_gpio(desc); + *irq_ret = gpiod_to_irq(desc); + + gpiod_put(desc); + + return 0; +} + +static struct platform_device * +soc_button_device_create(struct platform_device *pdev, + const struct soc_button_info *button_info, + bool autorepeat) +{ + const struct soc_button_info *info; + struct platform_device *pd; + struct gpio_keys_button *gpio_keys; + struct gpio_keys_platform_data *gpio_keys_pdata; + const struct dmi_system_id *dmi_id; + int invalid_acpi_index = -1; + int error, gpio, irq; + int n_buttons = 0; + + for (info = button_info; info->name; info++) + if (info->autorepeat == autorepeat) + n_buttons++; + + gpio_keys_pdata = devm_kzalloc(&pdev->dev, + sizeof(*gpio_keys_pdata) + + sizeof(*gpio_keys) * n_buttons, + GFP_KERNEL); + if (!gpio_keys_pdata) + return ERR_PTR(-ENOMEM); + + gpio_keys = (void *)(gpio_keys_pdata + 1); + n_buttons = 0; + + dmi_id = dmi_first_match(dmi_invalid_acpi_index); + if (dmi_id) + invalid_acpi_index = (long)dmi_id->driver_data; + + for (info = button_info; info->name; info++) { + if (info->autorepeat != autorepeat) + continue; + + if (info->acpi_index == invalid_acpi_index) + continue; + + error = soc_button_lookup_gpio(&pdev->dev, info->acpi_index, &gpio, &irq); + if (error || irq < 0) { + /* + * Skip GPIO if not present. Note we deliberately + * ignore -EPROBE_DEFER errors here. On some devices + * Intel is using so called virtual GPIOs which are not + * GPIOs at all but some way for AML code to check some + * random status bits without need a custom opregion. + * In some cases the resources table we parse points to + * such a virtual GPIO, since these are not real GPIOs + * we do not have a driver for these so they will never + * show up, therefore we ignore -EPROBE_DEFER. + */ + continue; + } + + /* See dmi_use_low_level_irq[] comment */ + if (!autorepeat && (use_low_level_irq || + dmi_check_system(dmi_use_low_level_irq))) { + irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); + gpio_keys[n_buttons].irq = irq; + gpio_keys[n_buttons].gpio = -ENOENT; + } else { + gpio_keys[n_buttons].gpio = gpio; + } + + gpio_keys[n_buttons].type = info->event_type; + gpio_keys[n_buttons].code = info->event_code; + gpio_keys[n_buttons].active_low = info->active_low; + gpio_keys[n_buttons].desc = info->name; + gpio_keys[n_buttons].wakeup = info->wakeup; + /* These devices often use cheap buttons, use 50 ms debounce */ + gpio_keys[n_buttons].debounce_interval = 50; + n_buttons++; + } + + if (n_buttons == 0) { + error = -ENODEV; + goto err_free_mem; + } + + gpio_keys_pdata->buttons = gpio_keys; + gpio_keys_pdata->nbuttons = n_buttons; + gpio_keys_pdata->rep = autorepeat; + + pd = platform_device_register_resndata(&pdev->dev, "gpio-keys", + PLATFORM_DEVID_AUTO, NULL, 0, + gpio_keys_pdata, + sizeof(*gpio_keys_pdata)); + error = PTR_ERR_OR_ZERO(pd); + if (error) { + dev_err(&pdev->dev, + "failed registering gpio-keys: %d\n", error); + goto err_free_mem; + } + + return pd; + +err_free_mem: + devm_kfree(&pdev->dev, gpio_keys_pdata); + return ERR_PTR(error); +} + +static int soc_button_get_acpi_object_int(const union acpi_object *obj) +{ + if (obj->type != ACPI_TYPE_INTEGER) + return -1; + + return obj->integer.value; +} + +/* Parse a single ACPI0011 _DSD button descriptor */ +static int soc_button_parse_btn_desc(struct device *dev, + const union acpi_object *desc, + int collection_uid, + struct soc_button_info *info) +{ + int upage, usage; + + if (desc->type != ACPI_TYPE_PACKAGE || + desc->package.count != 5 || + /* First byte should be 1 (control) */ + soc_button_get_acpi_object_int(&desc->package.elements[0]) != 1 || + /* Third byte should be collection uid */ + soc_button_get_acpi_object_int(&desc->package.elements[2]) != + collection_uid) { + dev_err(dev, "Invalid ACPI Button Descriptor\n"); + return -ENODEV; + } + + info->event_type = EV_KEY; + info->active_low = true; + info->acpi_index = + soc_button_get_acpi_object_int(&desc->package.elements[1]); + upage = soc_button_get_acpi_object_int(&desc->package.elements[3]); + usage = soc_button_get_acpi_object_int(&desc->package.elements[4]); + + /* + * The UUID: fa6bd625-9ce8-470d-a2c7-b3ca36c4282e descriptors use HID + * usage page and usage codes, but otherwise the device is not HID + * compliant: it uses one irq per button instead of generating HID + * input reports and some buttons should generate wakeups where as + * others should not, so we cannot use the HID subsystem. + * + * Luckily all devices only use a few usage page + usage combinations, + * so we can simply check for the known combinations here. + */ + if (upage == 0x01 && usage == 0x81) { + info->name = "power"; + info->event_code = KEY_POWER; + info->wakeup = true; + } else if (upage == 0x01 && usage == 0xc6) { + info->name = "airplane mode switch"; + info->event_type = EV_SW; + info->event_code = SW_RFKILL_ALL; + info->active_low = false; + } else if (upage == 0x01 && usage == 0xca) { + info->name = "rotation lock switch"; + info->event_type = EV_SW; + info->event_code = SW_ROTATE_LOCK; + } else if (upage == 0x07 && usage == 0xe3) { + info->name = "home"; + info->event_code = KEY_LEFTMETA; + info->wakeup = true; + } else if (upage == 0x0c && usage == 0xe9) { + info->name = "volume_up"; + info->event_code = KEY_VOLUMEUP; + info->autorepeat = true; + } else if (upage == 0x0c && usage == 0xea) { + info->name = "volume_down"; + info->event_code = KEY_VOLUMEDOWN; + info->autorepeat = true; + } else { + dev_warn(dev, "Unknown button index %d upage %02x usage %02x, ignoring\n", + info->acpi_index, upage, usage); + info->name = "unknown"; + info->event_code = KEY_RESERVED; + } + + return 0; +} + +/* ACPI0011 _DSD btns descriptors UUID: fa6bd625-9ce8-470d-a2c7-b3ca36c4282e */ +static const u8 btns_desc_uuid[16] = { + 0x25, 0xd6, 0x6b, 0xfa, 0xe8, 0x9c, 0x0d, 0x47, + 0xa2, 0xc7, 0xb3, 0xca, 0x36, 0xc4, 0x28, 0x2e +}; + +/* Parse ACPI0011 _DSD button descriptors */ +static struct soc_button_info *soc_button_get_button_info(struct device *dev) +{ + struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER }; + const union acpi_object *desc, *el0, *uuid, *btns_desc = NULL; + struct soc_button_info *button_info; + acpi_status status; + int i, btn, collection_uid = -1; + + status = acpi_evaluate_object_typed(ACPI_HANDLE(dev), "_DSD", NULL, + &buf, ACPI_TYPE_PACKAGE); + if (ACPI_FAILURE(status)) { + dev_err(dev, "ACPI _DSD object not found\n"); + return ERR_PTR(-ENODEV); + } + + /* Look for the Button Descriptors UUID */ + desc = buf.pointer; + for (i = 0; (i + 1) < desc->package.count; i += 2) { + uuid = &desc->package.elements[i]; + + if (uuid->type != ACPI_TYPE_BUFFER || + uuid->buffer.length != 16 || + desc->package.elements[i + 1].type != ACPI_TYPE_PACKAGE) { + break; + } + + if (memcmp(uuid->buffer.pointer, btns_desc_uuid, 16) == 0) { + btns_desc = &desc->package.elements[i + 1]; + break; + } + } + + if (!btns_desc) { + dev_err(dev, "ACPI Button Descriptors not found\n"); + button_info = ERR_PTR(-ENODEV); + goto out; + } + + /* The first package describes the collection */ + el0 = &btns_desc->package.elements[0]; + if (el0->type == ACPI_TYPE_PACKAGE && + el0->package.count == 5 && + /* First byte should be 0 (collection) */ + soc_button_get_acpi_object_int(&el0->package.elements[0]) == 0 && + /* Third byte should be 0 (top level collection) */ + soc_button_get_acpi_object_int(&el0->package.elements[2]) == 0) { + collection_uid = soc_button_get_acpi_object_int( + &el0->package.elements[1]); + } + if (collection_uid == -1) { + dev_err(dev, "Invalid Button Collection Descriptor\n"); + button_info = ERR_PTR(-ENODEV); + goto out; + } + + /* There are package.count - 1 buttons + 1 terminating empty entry */ + button_info = devm_kcalloc(dev, btns_desc->package.count, + sizeof(*button_info), GFP_KERNEL); + if (!button_info) { + button_info = ERR_PTR(-ENOMEM); + goto out; + } + + /* Parse the button descriptors */ + for (i = 1, btn = 0; i < btns_desc->package.count; i++, btn++) { + if (soc_button_parse_btn_desc(dev, + &btns_desc->package.elements[i], + collection_uid, + &button_info[btn])) { + button_info = ERR_PTR(-ENODEV); + goto out; + } + } + +out: + kfree(buf.pointer); + return button_info; +} + +static int soc_button_remove(struct platform_device *pdev) +{ + struct soc_button_data *priv = platform_get_drvdata(pdev); + + int i; + + for (i = 0; i < BUTTON_TYPES; i++) + if (priv->children[i]) + platform_device_unregister(priv->children[i]); + + return 0; +} + +static int soc_button_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct soc_device_data *device_data; + const struct soc_button_info *button_info; + struct soc_button_data *priv; + struct platform_device *pd; + int i; + int error; + + device_data = acpi_device_get_match_data(dev); + if (device_data && device_data->check) { + error = device_data->check(dev); + if (error) + return error; + } + + if (device_data && device_data->button_info) { + button_info = device_data->button_info; + } else { + button_info = soc_button_get_button_info(dev); + if (IS_ERR(button_info)) + return PTR_ERR(button_info); + } + + error = gpiod_count(dev, NULL); + if (error < 0) { + dev_dbg(dev, "no GPIO attached, ignoring...\n"); + return -ENODEV; + } + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + platform_set_drvdata(pdev, priv); + + for (i = 0; i < BUTTON_TYPES; i++) { + pd = soc_button_device_create(pdev, button_info, i == 0); + if (IS_ERR(pd)) { + error = PTR_ERR(pd); + if (error != -ENODEV) { + soc_button_remove(pdev); + return error; + } + continue; + } + + priv->children[i] = pd; + } + + if (!priv->children[0] && !priv->children[1]) + return -ENODEV; + + if (!device_data || !device_data->button_info) + devm_kfree(dev, button_info); + + return 0; +} + +/* + * Definition of buttons on the tablet. The ACPI index of each button + * is defined in section 2.8.7.2 of "Windows ACPI Design Guide for SoC + * Platforms" + */ +static const struct soc_button_info soc_button_PNP0C40[] = { + { "power", 0, EV_KEY, KEY_POWER, false, true, true }, + { "home", 1, EV_KEY, KEY_LEFTMETA, false, true, true }, + { "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false, true }, + { "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false, true }, + { "rotation_lock", 4, EV_KEY, KEY_ROTATE_LOCK_TOGGLE, false, false, true }, + { } +}; + +static const struct soc_device_data soc_device_PNP0C40 = { + .button_info = soc_button_PNP0C40, +}; + +static const struct soc_button_info soc_button_INT33D3[] = { + { "tablet_mode", 0, EV_SW, SW_TABLET_MODE, false, false, false }, + { } +}; + +static const struct soc_device_data soc_device_INT33D3 = { + .button_info = soc_button_INT33D3, +}; + +/* + * Special device check for Surface Book 2 and Surface Pro (2017). + * Both, the Surface Pro 4 (surfacepro3_button.c) and the above mentioned + * devices use MSHW0040 for power and volume buttons, however the way they + * have to be addressed differs. Make sure that we only load this drivers + * for the correct devices by checking the OEM Platform Revision provided by + * the _DSM method. + */ +#define MSHW0040_DSM_REVISION 0x01 +#define MSHW0040_DSM_GET_OMPR 0x02 // get OEM Platform Revision +static const guid_t MSHW0040_DSM_UUID = + GUID_INIT(0x6fd05c69, 0xcde3, 0x49f4, 0x95, 0xed, 0xab, 0x16, 0x65, + 0x49, 0x80, 0x35); + +static int soc_device_check_MSHW0040(struct device *dev) +{ + acpi_handle handle = ACPI_HANDLE(dev); + union acpi_object *result; + u64 oem_platform_rev = 0; // valid revisions are nonzero + + // get OEM platform revision + result = acpi_evaluate_dsm_typed(handle, &MSHW0040_DSM_UUID, + MSHW0040_DSM_REVISION, + MSHW0040_DSM_GET_OMPR, NULL, + ACPI_TYPE_INTEGER); + + if (result) { + oem_platform_rev = result->integer.value; + ACPI_FREE(result); + } + + /* + * If the revision is zero here, the _DSM evaluation has failed. This + * indicates that we have a Pro 4 or Book 1 and this driver should not + * be used. + */ + if (oem_platform_rev == 0) + return -ENODEV; + + dev_dbg(dev, "OEM Platform Revision %llu\n", oem_platform_rev); + + return 0; +} + +/* + * Button infos for Microsoft Surface Book 2 and Surface Pro (2017). + * Obtained from DSDT/testing. + */ +static const struct soc_button_info soc_button_MSHW0040[] = { + { "power", 0, EV_KEY, KEY_POWER, false, true, true }, + { "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false, true }, + { "volume_down", 4, EV_KEY, KEY_VOLUMEDOWN, true, false, true }, + { } +}; + +static const struct soc_device_data soc_device_MSHW0040 = { + .button_info = soc_button_MSHW0040, + .check = soc_device_check_MSHW0040, +}; + +static const struct acpi_device_id soc_button_acpi_match[] = { + { "PNP0C40", (unsigned long)&soc_device_PNP0C40 }, + { "INT33D3", (unsigned long)&soc_device_INT33D3 }, + { "ID9001", (unsigned long)&soc_device_INT33D3 }, + { "ACPI0011", 0 }, + + /* Microsoft Surface Devices (5th and 6th generation) */ + { "MSHW0040", (unsigned long)&soc_device_MSHW0040 }, + + { } +}; + +MODULE_DEVICE_TABLE(acpi, soc_button_acpi_match); + +static struct platform_driver soc_button_driver = { + .probe = soc_button_probe, + .remove = soc_button_remove, + .driver = { + .name = KBUILD_MODNAME, + .acpi_match_table = ACPI_PTR(soc_button_acpi_match), + }, +}; +module_platform_driver(soc_button_driver); + +MODULE_LICENSE("GPL"); |