diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/input/rmi4/rmi_bus.h | 199 |
1 files changed, 199 insertions, 0 deletions
diff --git a/drivers/input/rmi4/rmi_bus.h b/drivers/input/rmi4/rmi_bus.h new file mode 100644 index 000000000..25df6320f --- /dev/null +++ b/drivers/input/rmi4/rmi_bus.h @@ -0,0 +1,199 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2011-2016 Synaptics Incorporated + * Copyright (c) 2011 Unixphere + */ + +#ifndef _RMI_BUS_H +#define _RMI_BUS_H + +#include <linux/rmi.h> + +struct rmi_device; + +/* + * The interrupt source count in the function descriptor can represent up to + * 6 interrupt sources in the normal manner. + */ +#define RMI_FN_MAX_IRQS 6 + +/** + * struct rmi_function - represents the implementation of an RMI4 + * function for a particular device (basically, a driver for that RMI4 function) + * + * @fd: The function descriptor of the RMI function + * @rmi_dev: Pointer to the RMI device associated with this function container + * @dev: The device associated with this particular function. + * + * @num_of_irqs: The number of irqs needed by this function + * @irq_pos: The position in the irq bitfield this function holds + * @irq_mask: For convenience, can be used to mask IRQ bits off during ATTN + * interrupt handling. + * @irqs: assigned virq numbers (up to num_of_irqs) + * + * @node: entry in device's list of functions + */ +struct rmi_function { + struct rmi_function_descriptor fd; + struct rmi_device *rmi_dev; + struct device dev; + struct list_head node; + + unsigned int num_of_irqs; + int irq[RMI_FN_MAX_IRQS]; + unsigned int irq_pos; + unsigned long irq_mask[]; +}; + +#define to_rmi_function(d) container_of(d, struct rmi_function, dev) + +bool rmi_is_function_device(struct device *dev); + +int __must_check rmi_register_function(struct rmi_function *); +void rmi_unregister_function(struct rmi_function *); + +/** + * struct rmi_function_handler - driver routines for a particular RMI function. + * + * @func: The RMI function number + * @reset: Called when a reset of the touch sensor is detected. The routine + * should perform any out-of-the-ordinary reset handling that might be + * necessary. Restoring of touch sensor configuration registers should be + * handled in the config() callback, below. + * @config: Called when the function container is first initialized, and + * after a reset is detected. This routine should write any necessary + * configuration settings to the device. + * @attention: Called when the IRQ(s) for the function are set by the touch + * sensor. + * @suspend: Should perform any required operations to suspend the particular + * function. + * @resume: Should perform any required operations to resume the particular + * function. + * + * All callbacks are expected to return 0 on success, error code on failure. + */ +struct rmi_function_handler { + struct device_driver driver; + + u8 func; + + int (*probe)(struct rmi_function *fn); + void (*remove)(struct rmi_function *fn); + int (*config)(struct rmi_function *fn); + int (*reset)(struct rmi_function *fn); + irqreturn_t (*attention)(int irq, void *ctx); + int (*suspend)(struct rmi_function *fn); + int (*resume)(struct rmi_function *fn); +}; + +#define to_rmi_function_handler(d) \ + container_of(d, struct rmi_function_handler, driver) + +int __must_check __rmi_register_function_handler(struct rmi_function_handler *, + struct module *, const char *); +#define rmi_register_function_handler(handler) \ + __rmi_register_function_handler(handler, THIS_MODULE, KBUILD_MODNAME) + +void rmi_unregister_function_handler(struct rmi_function_handler *); + +#define to_rmi_driver(d) \ + container_of(d, struct rmi_driver, driver) + +#define to_rmi_device(d) container_of(d, struct rmi_device, dev) + +static inline struct rmi_device_platform_data * +rmi_get_platform_data(struct rmi_device *d) +{ + return &d->xport->pdata; +} + +bool rmi_is_physical_device(struct device *dev); + +/** + * rmi_reset - reset a RMI4 device + * @d: Pointer to an RMI device + * + * Calls for a reset of each function implemented by a specific device. + * Returns 0 on success or a negative error code. + */ +static inline int rmi_reset(struct rmi_device *d) +{ + return d->driver->reset_handler(d); +} + +/** + * rmi_read - read a single byte + * @d: Pointer to an RMI device + * @addr: The address to read from + * @buf: The read buffer + * + * Reads a single byte of data using the underlying transport protocol + * into memory pointed by @buf. It returns 0 on success or a negative + * error code. + */ +static inline int rmi_read(struct rmi_device *d, u16 addr, u8 *buf) +{ + return d->xport->ops->read_block(d->xport, addr, buf, 1); +} + +/** + * rmi_read_block - read a block of bytes + * @d: Pointer to an RMI device + * @addr: The start address to read from + * @buf: The read buffer + * @len: Length of the read buffer + * + * Reads a block of byte data using the underlying transport protocol + * into memory pointed by @buf. It returns 0 on success or a negative + * error code. + */ +static inline int rmi_read_block(struct rmi_device *d, u16 addr, + void *buf, size_t len) +{ + return d->xport->ops->read_block(d->xport, addr, buf, len); +} + +/** + * rmi_write - write a single byte + * @d: Pointer to an RMI device + * @addr: The address to write to + * @data: The data to write + * + * Writes a single byte using the underlying transport protocol. It + * returns zero on success or a negative error code. + */ +static inline int rmi_write(struct rmi_device *d, u16 addr, u8 data) +{ + return d->xport->ops->write_block(d->xport, addr, &data, 1); +} + +/** + * rmi_write_block - write a block of bytes + * @d: Pointer to an RMI device + * @addr: The start address to write to + * @buf: The write buffer + * @len: Length of the write buffer + * + * Writes a block of byte data from buf using the underlaying transport + * protocol. It returns the amount of bytes written or a negative error code. + */ +static inline int rmi_write_block(struct rmi_device *d, u16 addr, + const void *buf, size_t len) +{ + return d->xport->ops->write_block(d->xport, addr, buf, len); +} + +int rmi_for_each_dev(void *data, int (*func)(struct device *dev, void *data)); + +extern struct bus_type rmi_bus_type; + +int rmi_of_property_read_u32(struct device *dev, u32 *result, + const char *prop, bool optional); + +#define RMI_DEBUG_CORE BIT(0) +#define RMI_DEBUG_XPORT BIT(1) +#define RMI_DEBUG_FN BIT(2) +#define RMI_DEBUG_2D_SENSOR BIT(3) + +void rmi_dbg(int flags, struct device *dev, const char *fmt, ...); +#endif |