summaryrefslogtreecommitdiffstats
path: root/drivers/media/i2c/tw9910.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/i2c/tw9910.c')
-rw-r--r--drivers/media/i2c/tw9910.c1027
1 files changed, 1027 insertions, 0 deletions
diff --git a/drivers/media/i2c/tw9910.c b/drivers/media/i2c/tw9910.c
new file mode 100644
index 000000000..a25a350b0
--- /dev/null
+++ b/drivers/media/i2c/tw9910.c
@@ -0,0 +1,1027 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * tw9910 Video Driver
+ *
+ * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on ov772x driver,
+ *
+ * Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
+ * Copyright (C) 2008 Magnus Damm
+ * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/v4l2-mediabus.h>
+#include <linux/videodev2.h>
+
+#include <media/i2c/tw9910.h>
+#include <media/v4l2-subdev.h>
+
+#define GET_ID(val) ((val & 0xF8) >> 3)
+#define GET_REV(val) (val & 0x07)
+
+/*
+ * register offset
+ */
+#define ID 0x00 /* Product ID Code Register */
+#define STATUS1 0x01 /* Chip Status Register I */
+#define INFORM 0x02 /* Input Format */
+#define OPFORM 0x03 /* Output Format Control Register */
+#define DLYCTR 0x04 /* Hysteresis and HSYNC Delay Control */
+#define OUTCTR1 0x05 /* Output Control I */
+#define ACNTL1 0x06 /* Analog Control Register 1 */
+#define CROP_HI 0x07 /* Cropping Register, High */
+#define VDELAY_LO 0x08 /* Vertical Delay Register, Low */
+#define VACTIVE_LO 0x09 /* Vertical Active Register, Low */
+#define HDELAY_LO 0x0A /* Horizontal Delay Register, Low */
+#define HACTIVE_LO 0x0B /* Horizontal Active Register, Low */
+#define CNTRL1 0x0C /* Control Register I */
+#define VSCALE_LO 0x0D /* Vertical Scaling Register, Low */
+#define SCALE_HI 0x0E /* Scaling Register, High */
+#define HSCALE_LO 0x0F /* Horizontal Scaling Register, Low */
+#define BRIGHT 0x10 /* BRIGHTNESS Control Register */
+#define CONTRAST 0x11 /* CONTRAST Control Register */
+#define SHARPNESS 0x12 /* SHARPNESS Control Register I */
+#define SAT_U 0x13 /* Chroma (U) Gain Register */
+#define SAT_V 0x14 /* Chroma (V) Gain Register */
+#define HUE 0x15 /* Hue Control Register */
+#define CORING1 0x17
+#define CORING2 0x18 /* Coring and IF compensation */
+#define VBICNTL 0x19 /* VBI Control Register */
+#define ACNTL2 0x1A /* Analog Control 2 */
+#define OUTCTR2 0x1B /* Output Control 2 */
+#define SDT 0x1C /* Standard Selection */
+#define SDTR 0x1D /* Standard Recognition */
+#define TEST 0x1F /* Test Control Register */
+#define CLMPG 0x20 /* Clamping Gain */
+#define IAGC 0x21 /* Individual AGC Gain */
+#define AGCGAIN 0x22 /* AGC Gain */
+#define PEAKWT 0x23 /* White Peak Threshold */
+#define CLMPL 0x24 /* Clamp level */
+#define SYNCT 0x25 /* Sync Amplitude */
+#define MISSCNT 0x26 /* Sync Miss Count Register */
+#define PCLAMP 0x27 /* Clamp Position Register */
+#define VCNTL1 0x28 /* Vertical Control I */
+#define VCNTL2 0x29 /* Vertical Control II */
+#define CKILL 0x2A /* Color Killer Level Control */
+#define COMB 0x2B /* Comb Filter Control */
+#define LDLY 0x2C /* Luma Delay and H Filter Control */
+#define MISC1 0x2D /* Miscellaneous Control I */
+#define LOOP 0x2E /* LOOP Control Register */
+#define MISC2 0x2F /* Miscellaneous Control II */
+#define MVSN 0x30 /* Macrovision Detection */
+#define STATUS2 0x31 /* Chip STATUS II */
+#define HFREF 0x32 /* H monitor */
+#define CLMD 0x33 /* CLAMP MODE */
+#define IDCNTL 0x34 /* ID Detection Control */
+#define CLCNTL1 0x35 /* Clamp Control I */
+#define ANAPLLCTL 0x4C
+#define VBIMIN 0x4D
+#define HSLOWCTL 0x4E
+#define WSS3 0x4F
+#define FILLDATA 0x50
+#define SDID 0x51
+#define DID 0x52
+#define WSS1 0x53
+#define WSS2 0x54
+#define VVBI 0x55
+#define LCTL6 0x56
+#define LCTL7 0x57
+#define LCTL8 0x58
+#define LCTL9 0x59
+#define LCTL10 0x5A
+#define LCTL11 0x5B
+#define LCTL12 0x5C
+#define LCTL13 0x5D
+#define LCTL14 0x5E
+#define LCTL15 0x5F
+#define LCTL16 0x60
+#define LCTL17 0x61
+#define LCTL18 0x62
+#define LCTL19 0x63
+#define LCTL20 0x64
+#define LCTL21 0x65
+#define LCTL22 0x66
+#define LCTL23 0x67
+#define LCTL24 0x68
+#define LCTL25 0x69
+#define LCTL26 0x6A
+#define HSBEGIN 0x6B
+#define HSEND 0x6C
+#define OVSDLY 0x6D
+#define OVSEND 0x6E
+#define VBIDELAY 0x6F
+
+/*
+ * register detail
+ */
+
+/* INFORM */
+#define FC27_ON 0x40 /* 1 : Input crystal clock frequency is 27MHz */
+#define FC27_FF 0x00 /* 0 : Square pixel mode. */
+ /* Must use 24.54MHz for 60Hz field rate */
+ /* source or 29.5MHz for 50Hz field rate */
+#define IFSEL_S 0x10 /* 01 : S-video decoding */
+#define IFSEL_C 0x00 /* 00 : Composite video decoding */
+ /* Y input video selection */
+#define YSEL_M0 0x00 /* 00 : Mux0 selected */
+#define YSEL_M1 0x04 /* 01 : Mux1 selected */
+#define YSEL_M2 0x08 /* 10 : Mux2 selected */
+#define YSEL_M3 0x10 /* 11 : Mux3 selected */
+
+/* OPFORM */
+#define MODE 0x80 /* 0 : CCIR601 compatible YCrCb 4:2:2 format */
+ /* 1 : ITU-R-656 compatible data sequence format */
+#define LEN 0x40 /* 0 : 8-bit YCrCb 4:2:2 output format */
+ /* 1 : 16-bit YCrCb 4:2:2 output format.*/
+#define LLCMODE 0x20 /* 1 : LLC output mode. */
+ /* 0 : free-run output mode */
+#define AINC 0x10 /* Serial interface auto-indexing control */
+ /* 0 : auto-increment */
+ /* 1 : non-auto */
+#define VSCTL 0x08 /* 1 : Vertical out ctrl by DVALID */
+ /* 0 : Vertical out ctrl by HACTIVE and DVALID */
+#define OEN_TRI_SEL_MASK 0x07
+#define OEN_TRI_SEL_ALL_ON 0x00 /* Enable output for Rev0/Rev1 */
+#define OEN_TRI_SEL_ALL_OFF_r0 0x06 /* All tri-stated for Rev0 */
+#define OEN_TRI_SEL_ALL_OFF_r1 0x07 /* All tri-stated for Rev1 */
+
+/* OUTCTR1 */
+#define VSP_LO 0x00 /* 0 : VS pin output polarity is active low */
+#define VSP_HI 0x80 /* 1 : VS pin output polarity is active high. */
+ /* VS pin output control */
+#define VSSL_VSYNC 0x00 /* 0 : VSYNC */
+#define VSSL_VACT 0x10 /* 1 : VACT */
+#define VSSL_FIELD 0x20 /* 2 : FIELD */
+#define VSSL_VVALID 0x30 /* 3 : VVALID */
+#define VSSL_ZERO 0x70 /* 7 : 0 */
+#define HSP_LOW 0x00 /* 0 : HS pin output polarity is active low */
+#define HSP_HI 0x08 /* 1 : HS pin output polarity is active high.*/
+ /* HS pin output control */
+#define HSSL_HACT 0x00 /* 0 : HACT */
+#define HSSL_HSYNC 0x01 /* 1 : HSYNC */
+#define HSSL_DVALID 0x02 /* 2 : DVALID */
+#define HSSL_HLOCK 0x03 /* 3 : HLOCK */
+#define HSSL_ASYNCW 0x04 /* 4 : ASYNCW */
+#define HSSL_ZERO 0x07 /* 7 : 0 */
+
+/* ACNTL1 */
+#define SRESET 0x80 /* resets the device to its default state
+ * but all register content remain unchanged.
+ * This bit is self-resetting.
+ */
+#define ACNTL1_PDN_MASK 0x0e
+#define CLK_PDN 0x08 /* system clock power down */
+#define Y_PDN 0x04 /* Luma ADC power down */
+#define C_PDN 0x02 /* Chroma ADC power down */
+
+/* ACNTL2 */
+#define ACNTL2_PDN_MASK 0x40
+#define PLL_PDN 0x40 /* PLL power down */
+
+/* VBICNTL */
+
+/* RTSEL : control the real time signal output from the MPOUT pin */
+#define RTSEL_MASK 0x07
+#define RTSEL_VLOSS 0x00 /* 0000 = Video loss */
+#define RTSEL_HLOCK 0x01 /* 0001 = H-lock */
+#define RTSEL_SLOCK 0x02 /* 0010 = S-lock */
+#define RTSEL_VLOCK 0x03 /* 0011 = V-lock */
+#define RTSEL_MONO 0x04 /* 0100 = MONO */
+#define RTSEL_DET50 0x05 /* 0101 = DET50 */
+#define RTSEL_FIELD 0x06 /* 0110 = FIELD */
+#define RTSEL_RTCO 0x07 /* 0111 = RTCO ( Real Time Control ) */
+
+/* HSYNC start and end are constant for now */
+#define HSYNC_START 0x0260
+#define HSYNC_END 0x0300
+
+/*
+ * structure
+ */
+
+struct regval_list {
+ unsigned char reg_num;
+ unsigned char value;
+};
+
+struct tw9910_scale_ctrl {
+ char *name;
+ unsigned short width;
+ unsigned short height;
+ u16 hscale;
+ u16 vscale;
+};
+
+struct tw9910_priv {
+ struct v4l2_subdev subdev;
+ struct clk *clk;
+ struct tw9910_video_info *info;
+ struct gpio_desc *pdn_gpio;
+ struct gpio_desc *rstb_gpio;
+ const struct tw9910_scale_ctrl *scale;
+ v4l2_std_id norm;
+ u32 revision;
+};
+
+static const struct tw9910_scale_ctrl tw9910_ntsc_scales[] = {
+ {
+ .name = "NTSC SQ",
+ .width = 640,
+ .height = 480,
+ .hscale = 0x0100,
+ .vscale = 0x0100,
+ },
+ {
+ .name = "NTSC CCIR601",
+ .width = 720,
+ .height = 480,
+ .hscale = 0x0100,
+ .vscale = 0x0100,
+ },
+ {
+ .name = "NTSC SQ (CIF)",
+ .width = 320,
+ .height = 240,
+ .hscale = 0x0200,
+ .vscale = 0x0200,
+ },
+ {
+ .name = "NTSC CCIR601 (CIF)",
+ .width = 360,
+ .height = 240,
+ .hscale = 0x0200,
+ .vscale = 0x0200,
+ },
+ {
+ .name = "NTSC SQ (QCIF)",
+ .width = 160,
+ .height = 120,
+ .hscale = 0x0400,
+ .vscale = 0x0400,
+ },
+ {
+ .name = "NTSC CCIR601 (QCIF)",
+ .width = 180,
+ .height = 120,
+ .hscale = 0x0400,
+ .vscale = 0x0400,
+ },
+};
+
+static const struct tw9910_scale_ctrl tw9910_pal_scales[] = {
+ {
+ .name = "PAL SQ",
+ .width = 768,
+ .height = 576,
+ .hscale = 0x0100,
+ .vscale = 0x0100,
+ },
+ {
+ .name = "PAL CCIR601",
+ .width = 720,
+ .height = 576,
+ .hscale = 0x0100,
+ .vscale = 0x0100,
+ },
+ {
+ .name = "PAL SQ (CIF)",
+ .width = 384,
+ .height = 288,
+ .hscale = 0x0200,
+ .vscale = 0x0200,
+ },
+ {
+ .name = "PAL CCIR601 (CIF)",
+ .width = 360,
+ .height = 288,
+ .hscale = 0x0200,
+ .vscale = 0x0200,
+ },
+ {
+ .name = "PAL SQ (QCIF)",
+ .width = 192,
+ .height = 144,
+ .hscale = 0x0400,
+ .vscale = 0x0400,
+ },
+ {
+ .name = "PAL CCIR601 (QCIF)",
+ .width = 180,
+ .height = 144,
+ .hscale = 0x0400,
+ .vscale = 0x0400,
+ },
+};
+
+/*
+ * general function
+ */
+static struct tw9910_priv *to_tw9910(const struct i2c_client *client)
+{
+ return container_of(i2c_get_clientdata(client), struct tw9910_priv,
+ subdev);
+}
+
+static int tw9910_mask_set(struct i2c_client *client, u8 command,
+ u8 mask, u8 set)
+{
+ s32 val = i2c_smbus_read_byte_data(client, command);
+
+ if (val < 0)
+ return val;
+
+ val &= ~mask;
+ val |= set & mask;
+
+ return i2c_smbus_write_byte_data(client, command, val);
+}
+
+static int tw9910_set_scale(struct i2c_client *client,
+ const struct tw9910_scale_ctrl *scale)
+{
+ int ret;
+
+ ret = i2c_smbus_write_byte_data(client, SCALE_HI,
+ (scale->vscale & 0x0F00) >> 4 |
+ (scale->hscale & 0x0F00) >> 8);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte_data(client, HSCALE_LO,
+ scale->hscale & 0x00FF);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte_data(client, VSCALE_LO,
+ scale->vscale & 0x00FF);
+
+ return ret;
+}
+
+static int tw9910_set_hsync(struct i2c_client *client)
+{
+ struct tw9910_priv *priv = to_tw9910(client);
+ int ret;
+
+ /* bit 10 - 3 */
+ ret = i2c_smbus_write_byte_data(client, HSBEGIN,
+ (HSYNC_START & 0x07F8) >> 3);
+ if (ret < 0)
+ return ret;
+
+ /* bit 10 - 3 */
+ ret = i2c_smbus_write_byte_data(client, HSEND,
+ (HSYNC_END & 0x07F8) >> 3);
+ if (ret < 0)
+ return ret;
+
+ /* So far only revisions 0 and 1 have been seen. */
+ /* bit 2 - 0 */
+ if (priv->revision == 1)
+ ret = tw9910_mask_set(client, HSLOWCTL, 0x77,
+ (HSYNC_START & 0x0007) << 4 |
+ (HSYNC_END & 0x0007));
+
+ return ret;
+}
+
+static void tw9910_reset(struct i2c_client *client)
+{
+ tw9910_mask_set(client, ACNTL1, SRESET, SRESET);
+ usleep_range(1000, 5000);
+}
+
+static int tw9910_power(struct i2c_client *client, int enable)
+{
+ int ret;
+ u8 acntl1;
+ u8 acntl2;
+
+ if (enable) {
+ acntl1 = 0;
+ acntl2 = 0;
+ } else {
+ acntl1 = CLK_PDN | Y_PDN | C_PDN;
+ acntl2 = PLL_PDN;
+ }
+
+ ret = tw9910_mask_set(client, ACNTL1, ACNTL1_PDN_MASK, acntl1);
+ if (ret < 0)
+ return ret;
+
+ return tw9910_mask_set(client, ACNTL2, ACNTL2_PDN_MASK, acntl2);
+}
+
+static const struct tw9910_scale_ctrl *tw9910_select_norm(v4l2_std_id norm,
+ u32 width, u32 height)
+{
+ const struct tw9910_scale_ctrl *scale;
+ const struct tw9910_scale_ctrl *ret = NULL;
+ __u32 diff = 0xffffffff, tmp;
+ int size, i;
+
+ if (norm & V4L2_STD_NTSC) {
+ scale = tw9910_ntsc_scales;
+ size = ARRAY_SIZE(tw9910_ntsc_scales);
+ } else if (norm & V4L2_STD_PAL) {
+ scale = tw9910_pal_scales;
+ size = ARRAY_SIZE(tw9910_pal_scales);
+ } else {
+ return NULL;
+ }
+
+ for (i = 0; i < size; i++) {
+ tmp = abs(width - scale[i].width) +
+ abs(height - scale[i].height);
+ if (tmp < diff) {
+ diff = tmp;
+ ret = scale + i;
+ }
+ }
+
+ return ret;
+}
+
+/*
+ * subdevice operations
+ */
+static int tw9910_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct tw9910_priv *priv = to_tw9910(client);
+ u8 val;
+ int ret;
+
+ if (!enable) {
+ switch (priv->revision) {
+ case 0:
+ val = OEN_TRI_SEL_ALL_OFF_r0;
+ break;
+ case 1:
+ val = OEN_TRI_SEL_ALL_OFF_r1;
+ break;
+ default:
+ dev_err(&client->dev, "un-supported revision\n");
+ return -EINVAL;
+ }
+ } else {
+ val = OEN_TRI_SEL_ALL_ON;
+
+ if (!priv->scale) {
+ dev_err(&client->dev, "norm select error\n");
+ return -EPERM;
+ }
+
+ dev_dbg(&client->dev, "%s %dx%d\n",
+ priv->scale->name,
+ priv->scale->width,
+ priv->scale->height);
+ }
+
+ ret = tw9910_mask_set(client, OPFORM, OEN_TRI_SEL_MASK, val);
+ if (ret < 0)
+ return ret;
+
+ return tw9910_power(client, enable);
+}
+
+static int tw9910_g_std(struct v4l2_subdev *sd, v4l2_std_id *norm)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct tw9910_priv *priv = to_tw9910(client);
+
+ *norm = priv->norm;
+
+ return 0;
+}
+
+static int tw9910_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct tw9910_priv *priv = to_tw9910(client);
+ const unsigned int hact = 720;
+ const unsigned int hdelay = 15;
+ unsigned int vact;
+ unsigned int vdelay;
+ int ret;
+
+ if (!(norm & (V4L2_STD_NTSC | V4L2_STD_PAL)))
+ return -EINVAL;
+
+ priv->norm = norm;
+ if (norm & V4L2_STD_525_60) {
+ vact = 240;
+ vdelay = 18;
+ ret = tw9910_mask_set(client, VVBI, 0x10, 0x10);
+ } else {
+ vact = 288;
+ vdelay = 24;
+ ret = tw9910_mask_set(client, VVBI, 0x10, 0x00);
+ }
+ if (!ret)
+ ret = i2c_smbus_write_byte_data(client, CROP_HI,
+ ((vdelay >> 2) & 0xc0) |
+ ((vact >> 4) & 0x30) |
+ ((hdelay >> 6) & 0x0c) |
+ ((hact >> 8) & 0x03));
+ if (!ret)
+ ret = i2c_smbus_write_byte_data(client, VDELAY_LO,
+ vdelay & 0xff);
+ if (!ret)
+ ret = i2c_smbus_write_byte_data(client, VACTIVE_LO,
+ vact & 0xff);
+
+ return ret;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int tw9910_g_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int ret;
+
+ if (reg->reg > 0xff)
+ return -EINVAL;
+
+ reg->size = 1;
+ ret = i2c_smbus_read_byte_data(client, reg->reg);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * ret = int
+ * reg->val = __u64
+ */
+ reg->val = (__u64)ret;
+
+ return 0;
+}
+
+static int tw9910_s_register(struct v4l2_subdev *sd,
+ const struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (reg->reg > 0xff ||
+ reg->val > 0xff)
+ return -EINVAL;
+
+ return i2c_smbus_write_byte_data(client, reg->reg, reg->val);
+}
+#endif
+
+static void tw9910_set_gpio_value(struct gpio_desc *desc, int value)
+{
+ if (desc) {
+ gpiod_set_value(desc, value);
+ usleep_range(500, 1000);
+ }
+}
+
+static int tw9910_power_on(struct tw9910_priv *priv)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
+ int ret;
+
+ if (priv->clk) {
+ ret = clk_prepare_enable(priv->clk);
+ if (ret)
+ return ret;
+ }
+
+ tw9910_set_gpio_value(priv->pdn_gpio, 0);
+
+ /*
+ * FIXME: The reset signal is connected to a shared GPIO on some
+ * platforms (namely the SuperH Migo-R). Until a framework becomes
+ * available to handle this cleanly, request the GPIO temporarily
+ * to avoid conflicts.
+ */
+ priv->rstb_gpio = gpiod_get_optional(&client->dev, "rstb",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(priv->rstb_gpio)) {
+ dev_info(&client->dev, "Unable to get GPIO \"rstb\"");
+ clk_disable_unprepare(priv->clk);
+ tw9910_set_gpio_value(priv->pdn_gpio, 1);
+ return PTR_ERR(priv->rstb_gpio);
+ }
+
+ if (priv->rstb_gpio) {
+ tw9910_set_gpio_value(priv->rstb_gpio, 1);
+ tw9910_set_gpio_value(priv->rstb_gpio, 0);
+
+ gpiod_put(priv->rstb_gpio);
+ }
+
+ return 0;
+}
+
+static int tw9910_power_off(struct tw9910_priv *priv)
+{
+ clk_disable_unprepare(priv->clk);
+ tw9910_set_gpio_value(priv->pdn_gpio, 1);
+
+ return 0;
+}
+
+static int tw9910_s_power(struct v4l2_subdev *sd, int on)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct tw9910_priv *priv = to_tw9910(client);
+
+ return on ? tw9910_power_on(priv) : tw9910_power_off(priv);
+}
+
+static int tw9910_set_frame(struct v4l2_subdev *sd, u32 *width, u32 *height)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct tw9910_priv *priv = to_tw9910(client);
+ int ret = -EINVAL;
+ u8 val;
+
+ /* Select suitable norm. */
+ priv->scale = tw9910_select_norm(priv->norm, *width, *height);
+ if (!priv->scale)
+ goto tw9910_set_fmt_error;
+
+ /* Reset hardware. */
+ tw9910_reset(client);
+
+ /* Set bus width. */
+ val = 0x00;
+ if (priv->info->buswidth == 16)
+ val = LEN;
+
+ ret = tw9910_mask_set(client, OPFORM, LEN, val);
+ if (ret < 0)
+ goto tw9910_set_fmt_error;
+
+ /* Select MPOUT behavior. */
+ switch (priv->info->mpout) {
+ case TW9910_MPO_VLOSS:
+ val = RTSEL_VLOSS; break;
+ case TW9910_MPO_HLOCK:
+ val = RTSEL_HLOCK; break;
+ case TW9910_MPO_SLOCK:
+ val = RTSEL_SLOCK; break;
+ case TW9910_MPO_VLOCK:
+ val = RTSEL_VLOCK; break;
+ case TW9910_MPO_MONO:
+ val = RTSEL_MONO; break;
+ case TW9910_MPO_DET50:
+ val = RTSEL_DET50; break;
+ case TW9910_MPO_FIELD:
+ val = RTSEL_FIELD; break;
+ case TW9910_MPO_RTCO:
+ val = RTSEL_RTCO; break;
+ default:
+ val = 0;
+ }
+
+ ret = tw9910_mask_set(client, VBICNTL, RTSEL_MASK, val);
+ if (ret < 0)
+ goto tw9910_set_fmt_error;
+
+ /* Set scale. */
+ ret = tw9910_set_scale(client, priv->scale);
+ if (ret < 0)
+ goto tw9910_set_fmt_error;
+
+ /* Set hsync. */
+ ret = tw9910_set_hsync(client);
+ if (ret < 0)
+ goto tw9910_set_fmt_error;
+
+ *width = priv->scale->width;
+ *height = priv->scale->height;
+
+ return ret;
+
+tw9910_set_fmt_error:
+
+ tw9910_reset(client);
+ priv->scale = NULL;
+
+ return ret;
+}
+
+static int tw9910_get_selection(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_selection *sel)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct tw9910_priv *priv = to_tw9910(client);
+
+ if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
+ return -EINVAL;
+ /* Only CROP, CROP_DEFAULT and CROP_BOUNDS are supported. */
+ if (sel->target > V4L2_SEL_TGT_CROP_BOUNDS)
+ return -EINVAL;
+
+ sel->r.left = 0;
+ sel->r.top = 0;
+ if (priv->norm & V4L2_STD_NTSC) {
+ sel->r.width = 640;
+ sel->r.height = 480;
+ } else {
+ sel->r.width = 768;
+ sel->r.height = 576;
+ }
+
+ return 0;
+}
+
+static int tw9910_get_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct v4l2_mbus_framefmt *mf = &format->format;
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct tw9910_priv *priv = to_tw9910(client);
+
+ if (format->pad)
+ return -EINVAL;
+
+ if (!priv->scale) {
+ priv->scale = tw9910_select_norm(priv->norm, 640, 480);
+ if (!priv->scale)
+ return -EINVAL;
+ }
+
+ mf->width = priv->scale->width;
+ mf->height = priv->scale->height;
+ mf->code = MEDIA_BUS_FMT_UYVY8_2X8;
+ mf->colorspace = V4L2_COLORSPACE_SMPTE170M;
+ mf->field = V4L2_FIELD_INTERLACED_BT;
+
+ return 0;
+}
+
+static int tw9910_s_fmt(struct v4l2_subdev *sd,
+ struct v4l2_mbus_framefmt *mf)
+{
+ u32 width = mf->width, height = mf->height;
+ int ret;
+
+ WARN_ON(mf->field != V4L2_FIELD_ANY &&
+ mf->field != V4L2_FIELD_INTERLACED_BT);
+
+ /* Check color format. */
+ if (mf->code != MEDIA_BUS_FMT_UYVY8_2X8)
+ return -EINVAL;
+
+ mf->colorspace = V4L2_COLORSPACE_SMPTE170M;
+
+ ret = tw9910_set_frame(sd, &width, &height);
+ if (ret)
+ return ret;
+
+ mf->width = width;
+ mf->height = height;
+
+ return 0;
+}
+
+static int tw9910_set_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct v4l2_mbus_framefmt *mf = &format->format;
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct tw9910_priv *priv = to_tw9910(client);
+ const struct tw9910_scale_ctrl *scale;
+
+ if (format->pad)
+ return -EINVAL;
+
+ if (mf->field == V4L2_FIELD_ANY) {
+ mf->field = V4L2_FIELD_INTERLACED_BT;
+ } else if (mf->field != V4L2_FIELD_INTERLACED_BT) {
+ dev_err(&client->dev, "Field type %d invalid\n", mf->field);
+ return -EINVAL;
+ }
+
+ mf->code = MEDIA_BUS_FMT_UYVY8_2X8;
+ mf->colorspace = V4L2_COLORSPACE_SMPTE170M;
+
+ /* Select suitable norm. */
+ scale = tw9910_select_norm(priv->norm, mf->width, mf->height);
+ if (!scale)
+ return -EINVAL;
+
+ mf->width = scale->width;
+ mf->height = scale->height;
+
+ if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+ return tw9910_s_fmt(sd, mf);
+
+ cfg->try_fmt = *mf;
+
+ return 0;
+}
+
+static int tw9910_video_probe(struct i2c_client *client)
+{
+ struct tw9910_priv *priv = to_tw9910(client);
+ s32 id;
+ int ret;
+
+ /* TW9910 only use 8 or 16 bit bus width. */
+ if (priv->info->buswidth != 16 && priv->info->buswidth != 8) {
+ dev_err(&client->dev, "bus width error\n");
+ return -ENODEV;
+ }
+
+ ret = tw9910_s_power(&priv->subdev, 1);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Check and show Product ID.
+ * So far only revisions 0 and 1 have been seen.
+ */
+ id = i2c_smbus_read_byte_data(client, ID);
+ priv->revision = GET_REV(id);
+ id = GET_ID(id);
+
+ if (id != 0x0b || priv->revision > 0x01) {
+ dev_err(&client->dev, "Product ID error %x:%x\n",
+ id, priv->revision);
+ ret = -ENODEV;
+ goto done;
+ }
+
+ dev_info(&client->dev, "tw9910 Product ID %0x:%0x\n",
+ id, priv->revision);
+
+ priv->norm = V4L2_STD_NTSC;
+ priv->scale = &tw9910_ntsc_scales[0];
+
+done:
+ tw9910_s_power(&priv->subdev, 0);
+
+ return ret;
+}
+
+static const struct v4l2_subdev_core_ops tw9910_subdev_core_ops = {
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = tw9910_g_register,
+ .s_register = tw9910_s_register,
+#endif
+ .s_power = tw9910_s_power,
+};
+
+static int tw9910_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->pad || code->index)
+ return -EINVAL;
+
+ code->code = MEDIA_BUS_FMT_UYVY8_2X8;
+
+ return 0;
+}
+
+static int tw9910_g_tvnorms(struct v4l2_subdev *sd, v4l2_std_id *norm)
+{
+ *norm = V4L2_STD_NTSC | V4L2_STD_PAL;
+
+ return 0;
+}
+
+static const struct v4l2_subdev_video_ops tw9910_subdev_video_ops = {
+ .s_std = tw9910_s_std,
+ .g_std = tw9910_g_std,
+ .s_stream = tw9910_s_stream,
+ .g_tvnorms = tw9910_g_tvnorms,
+};
+
+static const struct v4l2_subdev_pad_ops tw9910_subdev_pad_ops = {
+ .enum_mbus_code = tw9910_enum_mbus_code,
+ .get_selection = tw9910_get_selection,
+ .get_fmt = tw9910_get_fmt,
+ .set_fmt = tw9910_set_fmt,
+};
+
+static const struct v4l2_subdev_ops tw9910_subdev_ops = {
+ .core = &tw9910_subdev_core_ops,
+ .video = &tw9910_subdev_video_ops,
+ .pad = &tw9910_subdev_pad_ops,
+};
+
+/*
+ * i2c_driver function
+ */
+
+static int tw9910_probe(struct i2c_client *client,
+ const struct i2c_device_id *did)
+
+{
+ struct tw9910_priv *priv;
+ struct tw9910_video_info *info;
+ struct i2c_adapter *adapter = client->adapter;
+ int ret;
+
+ if (!client->dev.platform_data) {
+ dev_err(&client->dev, "TW9910: missing platform data!\n");
+ return -EINVAL;
+ }
+
+ info = client->dev.platform_data;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev,
+ "I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE_DATA\n");
+ return -EIO;
+ }
+
+ priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->info = info;
+
+ v4l2_i2c_subdev_init(&priv->subdev, client, &tw9910_subdev_ops);
+
+ priv->clk = clk_get(&client->dev, "xti");
+ if (PTR_ERR(priv->clk) == -ENOENT) {
+ priv->clk = NULL;
+ } else if (IS_ERR(priv->clk)) {
+ dev_err(&client->dev, "Unable to get xti clock\n");
+ return PTR_ERR(priv->clk);
+ }
+
+ priv->pdn_gpio = gpiod_get_optional(&client->dev, "pdn",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(priv->pdn_gpio)) {
+ dev_info(&client->dev, "Unable to get GPIO \"pdn\"");
+ ret = PTR_ERR(priv->pdn_gpio);
+ goto error_clk_put;
+ }
+
+ ret = tw9910_video_probe(client);
+ if (ret < 0)
+ goto error_gpio_put;
+
+ ret = v4l2_async_register_subdev(&priv->subdev);
+ if (ret)
+ goto error_gpio_put;
+
+ return ret;
+
+error_gpio_put:
+ if (priv->pdn_gpio)
+ gpiod_put(priv->pdn_gpio);
+error_clk_put:
+ clk_put(priv->clk);
+
+ return ret;
+}
+
+static int tw9910_remove(struct i2c_client *client)
+{
+ struct tw9910_priv *priv = to_tw9910(client);
+
+ if (priv->pdn_gpio)
+ gpiod_put(priv->pdn_gpio);
+ clk_put(priv->clk);
+ v4l2_async_unregister_subdev(&priv->subdev);
+
+ return 0;
+}
+
+static const struct i2c_device_id tw9910_id[] = {
+ { "tw9910", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tw9910_id);
+
+static struct i2c_driver tw9910_i2c_driver = {
+ .driver = {
+ .name = "tw9910",
+ },
+ .probe = tw9910_probe,
+ .remove = tw9910_remove,
+ .id_table = tw9910_id,
+};
+
+module_i2c_driver(tw9910_i2c_driver);
+
+MODULE_DESCRIPTION("V4L2 driver for TW9910 video decoder");
+MODULE_AUTHOR("Kuninori Morimoto");
+MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 10:41:44 +0000