diff options
Diffstat (limited to 'drivers/memstick/host/r592.c')
| -rw-r--r-- | drivers/memstick/host/r592.c | 893 |
1 files changed, 893 insertions, 0 deletions
diff --git a/drivers/memstick/host/r592.c b/drivers/memstick/host/r592.c new file mode 100644 index 000000000..0e37c6a5e --- /dev/null +++ b/drivers/memstick/host/r592.c @@ -0,0 +1,893 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2010 - Maxim Levitsky + * driver for Ricoh memstick readers + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/freezer.h> +#include <linux/jiffies.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/kthread.h> +#include <linux/sched.h> +#include <linux/highmem.h> +#include <asm/byteorder.h> +#include <linux/swab.h> +#include "r592.h" + +static bool r592_enable_dma = 1; +static int debug; + +static const char *tpc_names[] = { + "MS_TPC_READ_MG_STATUS", + "MS_TPC_READ_LONG_DATA", + "MS_TPC_READ_SHORT_DATA", + "MS_TPC_READ_REG", + "MS_TPC_READ_QUAD_DATA", + "INVALID", + "MS_TPC_GET_INT", + "MS_TPC_SET_RW_REG_ADRS", + "MS_TPC_EX_SET_CMD", + "MS_TPC_WRITE_QUAD_DATA", + "MS_TPC_WRITE_REG", + "MS_TPC_WRITE_SHORT_DATA", + "MS_TPC_WRITE_LONG_DATA", + "MS_TPC_SET_CMD", +}; + +/** + * memstick_debug_get_tpc_name - debug helper that returns string for + * a TPC number + */ +static __maybe_unused const char *memstick_debug_get_tpc_name(int tpc) +{ + return tpc_names[tpc-1]; +} + +/* Read a register*/ +static inline u32 r592_read_reg(struct r592_device *dev, int address) +{ + u32 value = readl(dev->mmio + address); + dbg_reg("reg #%02d == 0x%08x", address, value); + return value; +} + +/* Write a register */ +static inline void r592_write_reg(struct r592_device *dev, + int address, u32 value) +{ + dbg_reg("reg #%02d <- 0x%08x", address, value); + writel(value, dev->mmio + address); +} + +/* Reads a big endian DWORD register */ +static inline u32 r592_read_reg_raw_be(struct r592_device *dev, int address) +{ + u32 value = __raw_readl(dev->mmio + address); + dbg_reg("reg #%02d == 0x%08x", address, value); + return be32_to_cpu(value); +} + +/* Writes a big endian DWORD register */ +static inline void r592_write_reg_raw_be(struct r592_device *dev, + int address, u32 value) +{ + dbg_reg("reg #%02d <- 0x%08x", address, value); + __raw_writel(cpu_to_be32(value), dev->mmio + address); +} + +/* Set specific bits in a register (little endian) */ +static inline void r592_set_reg_mask(struct r592_device *dev, + int address, u32 mask) +{ + u32 reg = readl(dev->mmio + address); + dbg_reg("reg #%02d |= 0x%08x (old =0x%08x)", address, mask, reg); + writel(reg | mask , dev->mmio + address); +} + +/* Clear specific bits in a register (little endian) */ +static inline void r592_clear_reg_mask(struct r592_device *dev, + int address, u32 mask) +{ + u32 reg = readl(dev->mmio + address); + dbg_reg("reg #%02d &= 0x%08x (old = 0x%08x, mask = 0x%08x)", + address, ~mask, reg, mask); + writel(reg & ~mask, dev->mmio + address); +} + + +/* Wait for status bits while checking for errors */ +static int r592_wait_status(struct r592_device *dev, u32 mask, u32 wanted_mask) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(1000); + u32 reg = r592_read_reg(dev, R592_STATUS); + + if ((reg & mask) == wanted_mask) + return 0; + + while (time_before(jiffies, timeout)) { + + reg = r592_read_reg(dev, R592_STATUS); + + if ((reg & mask) == wanted_mask) + return 0; + + if (reg & (R592_STATUS_SEND_ERR | R592_STATUS_RECV_ERR)) + return -EIO; + + cpu_relax(); + } + return -ETIME; +} + + +/* Enable/disable device */ +static int r592_enable_device(struct r592_device *dev, bool enable) +{ + dbg("%sabling the device", enable ? "en" : "dis"); + + if (enable) { + + /* Power up the card */ + r592_write_reg(dev, R592_POWER, R592_POWER_0 | R592_POWER_1); + + /* Perform a reset */ + r592_set_reg_mask(dev, R592_IO, R592_IO_RESET); + + msleep(100); + } else + /* Power down the card */ + r592_write_reg(dev, R592_POWER, 0); + + return 0; +} + +/* Set serial/parallel mode */ +static int r592_set_mode(struct r592_device *dev, bool parallel_mode) +{ + if (!parallel_mode) { + dbg("switching to serial mode"); + + /* Set serial mode */ + r592_write_reg(dev, R592_IO_MODE, R592_IO_MODE_SERIAL); + + r592_clear_reg_mask(dev, R592_POWER, R592_POWER_20); + + } else { + dbg("switching to parallel mode"); + + /* This setting should be set _before_ switch TPC */ + r592_set_reg_mask(dev, R592_POWER, R592_POWER_20); + + r592_clear_reg_mask(dev, R592_IO, + R592_IO_SERIAL1 | R592_IO_SERIAL2); + + /* Set the parallel mode now */ + r592_write_reg(dev, R592_IO_MODE, R592_IO_MODE_PARALLEL); + } + + dev->parallel_mode = parallel_mode; + return 0; +} + +/* Perform a controller reset without powering down the card */ +static void r592_host_reset(struct r592_device *dev) +{ + r592_set_reg_mask(dev, R592_IO, R592_IO_RESET); + msleep(100); + r592_set_mode(dev, dev->parallel_mode); +} + +#ifdef CONFIG_PM_SLEEP +/* Disable all hardware interrupts */ +static void r592_clear_interrupts(struct r592_device *dev) +{ + /* Disable & ACK all interrupts */ + r592_clear_reg_mask(dev, R592_REG_MSC, IRQ_ALL_ACK_MASK); + r592_clear_reg_mask(dev, R592_REG_MSC, IRQ_ALL_EN_MASK); +} +#endif + +/* Tests if there is an CRC error */ +static int r592_test_io_error(struct r592_device *dev) +{ + if (!(r592_read_reg(dev, R592_STATUS) & + (R592_STATUS_SEND_ERR | R592_STATUS_RECV_ERR))) + return 0; + + return -EIO; +} + +/* Ensure that FIFO is ready for use */ +static int r592_test_fifo_empty(struct r592_device *dev) +{ + if (r592_read_reg(dev, R592_REG_MSC) & R592_REG_MSC_FIFO_EMPTY) + return 0; + + dbg("FIFO not ready, trying to reset the device"); + r592_host_reset(dev); + + if (r592_read_reg(dev, R592_REG_MSC) & R592_REG_MSC_FIFO_EMPTY) + return 0; + + message("FIFO still not ready, giving up"); + return -EIO; +} + +/* Activates the DMA transfer from to FIFO */ +static void r592_start_dma(struct r592_device *dev, bool is_write) +{ + unsigned long flags; + u32 reg; + spin_lock_irqsave(&dev->irq_lock, flags); + + /* Ack interrupts (just in case) + enable them */ + r592_clear_reg_mask(dev, R592_REG_MSC, DMA_IRQ_ACK_MASK); + r592_set_reg_mask(dev, R592_REG_MSC, DMA_IRQ_EN_MASK); + + /* Set DMA address */ + r592_write_reg(dev, R592_FIFO_DMA, sg_dma_address(&dev->req->sg)); + + /* Enable the DMA */ + reg = r592_read_reg(dev, R592_FIFO_DMA_SETTINGS); + reg |= R592_FIFO_DMA_SETTINGS_EN; + + if (!is_write) + reg |= R592_FIFO_DMA_SETTINGS_DIR; + else + reg &= ~R592_FIFO_DMA_SETTINGS_DIR; + r592_write_reg(dev, R592_FIFO_DMA_SETTINGS, reg); + + spin_unlock_irqrestore(&dev->irq_lock, flags); +} + +/* Cleanups DMA related settings */ +static void r592_stop_dma(struct r592_device *dev, int error) +{ + r592_clear_reg_mask(dev, R592_FIFO_DMA_SETTINGS, + R592_FIFO_DMA_SETTINGS_EN); + + /* This is only a precation */ + r592_write_reg(dev, R592_FIFO_DMA, + dev->dummy_dma_page_physical_address); + + r592_clear_reg_mask(dev, R592_REG_MSC, DMA_IRQ_EN_MASK); + r592_clear_reg_mask(dev, R592_REG_MSC, DMA_IRQ_ACK_MASK); + dev->dma_error = error; +} + +/* Test if hardware supports DMA */ +static void r592_check_dma(struct r592_device *dev) +{ + dev->dma_capable = r592_enable_dma && + (r592_read_reg(dev, R592_FIFO_DMA_SETTINGS) & + R592_FIFO_DMA_SETTINGS_CAP); +} + +/* Transfers fifo contents in/out using DMA */ +static int r592_transfer_fifo_dma(struct r592_device *dev) +{ + int len, sg_count; + bool is_write; + + if (!dev->dma_capable || !dev->req->long_data) + return -EINVAL; + + len = dev->req->sg.length; + is_write = dev->req->data_dir == WRITE; + + if (len != R592_LFIFO_SIZE) + return -EINVAL; + + dbg_verbose("doing dma transfer"); + + dev->dma_error = 0; + reinit_completion(&dev->dma_done); + + /* TODO: hidden assumption about nenth beeing always 1 */ + sg_count = dma_map_sg(&dev->pci_dev->dev, &dev->req->sg, 1, is_write ? + PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE); + + if (sg_count != 1 || sg_dma_len(&dev->req->sg) < R592_LFIFO_SIZE) { + message("problem in dma_map_sg"); + return -EIO; + } + + r592_start_dma(dev, is_write); + + /* Wait for DMA completion */ + if (!wait_for_completion_timeout( + &dev->dma_done, msecs_to_jiffies(1000))) { + message("DMA timeout"); + r592_stop_dma(dev, -ETIMEDOUT); + } + + dma_unmap_sg(&dev->pci_dev->dev, &dev->req->sg, 1, is_write ? + PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE); + + + return dev->dma_error; +} + +/* + * Writes the FIFO in 4 byte chunks. + * If length isn't 4 byte aligned, rest of the data if put to a fifo + * to be written later + * Use r592_flush_fifo_write to flush that fifo when writing for the + * last time + */ +static void r592_write_fifo_pio(struct r592_device *dev, + unsigned char *buffer, int len) +{ + /* flush spill from former write */ + if (!kfifo_is_empty(&dev->pio_fifo)) { + + u8 tmp[4] = {0}; + int copy_len = kfifo_in(&dev->pio_fifo, buffer, len); + + if (!kfifo_is_full(&dev->pio_fifo)) + return; + len -= copy_len; + buffer += copy_len; + + copy_len = kfifo_out(&dev->pio_fifo, tmp, 4); + WARN_ON(copy_len != 4); + r592_write_reg_raw_be(dev, R592_FIFO_PIO, *(u32 *)tmp); + } + + WARN_ON(!kfifo_is_empty(&dev->pio_fifo)); + + /* write full dwords */ + while (len >= 4) { + r592_write_reg_raw_be(dev, R592_FIFO_PIO, *(u32 *)buffer); + buffer += 4; + len -= 4; + } + + /* put remaining bytes to the spill */ + if (len) + kfifo_in(&dev->pio_fifo, buffer, len); +} + +/* Flushes the temporary FIFO used to make aligned DWORD writes */ +static void r592_flush_fifo_write(struct r592_device *dev) +{ + u8 buffer[4] = { 0 }; + int len; + + if (kfifo_is_empty(&dev->pio_fifo)) + return; + + len = kfifo_out(&dev->pio_fifo, buffer, 4); + r592_write_reg_raw_be(dev, R592_FIFO_PIO, *(u32 *)buffer); +} + +/* + * Read a fifo in 4 bytes chunks. + * If input doesn't fit the buffer, it places bytes of last dword in spill + * buffer, so that they don't get lost on last read, just throw these away. + */ +static void r592_read_fifo_pio(struct r592_device *dev, + unsigned char *buffer, int len) +{ + u8 tmp[4]; + + /* Read from last spill */ + if (!kfifo_is_empty(&dev->pio_fifo)) { + int bytes_copied = + kfifo_out(&dev->pio_fifo, buffer, min(4, len)); + buffer += bytes_copied; + len -= bytes_copied; + + if (!kfifo_is_empty(&dev->pio_fifo)) + return; + } + + /* Reads dwords from FIFO */ + while (len >= 4) { + *(u32 *)buffer = r592_read_reg_raw_be(dev, R592_FIFO_PIO); + buffer += 4; + len -= 4; + } + + if (len) { + *(u32 *)tmp = r592_read_reg_raw_be(dev, R592_FIFO_PIO); + kfifo_in(&dev->pio_fifo, tmp, 4); + len -= kfifo_out(&dev->pio_fifo, buffer, len); + } + + WARN_ON(len); + return; +} + +/* Transfers actual data using PIO. */ +static int r592_transfer_fifo_pio(struct r592_device *dev) +{ + unsigned long flags; + + bool is_write = dev->req->tpc >= MS_TPC_SET_RW_REG_ADRS; + struct sg_mapping_iter miter; + + kfifo_reset(&dev->pio_fifo); + + if (!dev->req->long_data) { + if (is_write) { + r592_write_fifo_pio(dev, dev->req->data, + dev->req->data_len); + r592_flush_fifo_write(dev); + } else + r592_read_fifo_pio(dev, dev->req->data, + dev->req->data_len); + return 0; + } + + local_irq_save(flags); + sg_miter_start(&miter, &dev->req->sg, 1, SG_MITER_ATOMIC | + (is_write ? SG_MITER_FROM_SG : SG_MITER_TO_SG)); + + /* Do the transfer fifo<->memory*/ + while (sg_miter_next(&miter)) + if (is_write) + r592_write_fifo_pio(dev, miter.addr, miter.length); + else + r592_read_fifo_pio(dev, miter.addr, miter.length); + + + /* Write last few non aligned bytes*/ + if (is_write) + r592_flush_fifo_write(dev); + + sg_miter_stop(&miter); + local_irq_restore(flags); + return 0; +} + +/* Executes one TPC (data is read/written from small or large fifo) */ +static void r592_execute_tpc(struct r592_device *dev) +{ + bool is_write; + int len, error; + u32 status, reg; + + if (!dev->req) { + message("BUG: tpc execution without request!"); + return; + } + + is_write = dev->req->tpc >= MS_TPC_SET_RW_REG_ADRS; + len = dev->req->long_data ? + dev->req->sg.length : dev->req->data_len; + + /* Ensure that FIFO can hold the input data */ + if (len > R592_LFIFO_SIZE) { + message("IO: hardware doesn't support TPCs longer that 512"); + error = -ENOSYS; + goto out; + } + + if (!(r592_read_reg(dev, R592_REG_MSC) & R592_REG_MSC_PRSNT)) { + dbg("IO: refusing to send TPC because card is absent"); + error = -ENODEV; + goto out; + } + + dbg("IO: executing %s LEN=%d", + memstick_debug_get_tpc_name(dev->req->tpc), len); + + /* Set IO direction */ + if (is_write) + r592_set_reg_mask(dev, R592_IO, R592_IO_DIRECTION); + else + r592_clear_reg_mask(dev, R592_IO, R592_IO_DIRECTION); + + + error = r592_test_fifo_empty(dev); + if (error) + goto out; + + /* Transfer write data */ + if (is_write) { + error = r592_transfer_fifo_dma(dev); + if (error == -EINVAL) + error = r592_transfer_fifo_pio(dev); + } + + if (error) + goto out; + + /* Trigger the TPC */ + reg = (len << R592_TPC_EXEC_LEN_SHIFT) | + (dev->req->tpc << R592_TPC_EXEC_TPC_SHIFT) | + R592_TPC_EXEC_BIG_FIFO; + + r592_write_reg(dev, R592_TPC_EXEC, reg); + + /* Wait for TPC completion */ + status = R592_STATUS_RDY; + if (dev->req->need_card_int) + status |= R592_STATUS_CED; + + error = r592_wait_status(dev, status, status); + if (error) { + message("card didn't respond"); + goto out; + } + + /* Test IO errors */ + error = r592_test_io_error(dev); + if (error) { + dbg("IO error"); + goto out; + } + + /* Read data from FIFO */ + if (!is_write) { + error = r592_transfer_fifo_dma(dev); + if (error == -EINVAL) + error = r592_transfer_fifo_pio(dev); + } + + /* read INT reg. This can be shortened with shifts, but that way + its more readable */ + if (dev->parallel_mode && dev->req->need_card_int) { + + dev->req->int_reg = 0; + status = r592_read_reg(dev, R592_STATUS); + + if (status & R592_STATUS_P_CMDNACK) + dev->req->int_reg |= MEMSTICK_INT_CMDNAK; + if (status & R592_STATUS_P_BREQ) + dev->req->int_reg |= MEMSTICK_INT_BREQ; + if (status & R592_STATUS_P_INTERR) + dev->req->int_reg |= MEMSTICK_INT_ERR; + if (status & R592_STATUS_P_CED) + dev->req->int_reg |= MEMSTICK_INT_CED; + } + + if (error) + dbg("FIFO read error"); +out: + dev->req->error = error; + r592_clear_reg_mask(dev, R592_REG_MSC, R592_REG_MSC_LED); + return; +} + +/* Main request processing thread */ +static int r592_process_thread(void *data) +{ + int error; + struct r592_device *dev = (struct r592_device *)data; + unsigned long flags; + + while (!kthread_should_stop()) { + spin_lock_irqsave(&dev->io_thread_lock, flags); + set_current_state(TASK_INTERRUPTIBLE); + error = memstick_next_req(dev->host, &dev->req); + spin_unlock_irqrestore(&dev->io_thread_lock, flags); + + if (error) { + if (error == -ENXIO || error == -EAGAIN) { + dbg_verbose("IO: done IO, sleeping"); + } else { + dbg("IO: unknown error from " + "memstick_next_req %d", error); + } + + if (kthread_should_stop()) + set_current_state(TASK_RUNNING); + + schedule(); + } else { + set_current_state(TASK_RUNNING); + r592_execute_tpc(dev); + } + } + return 0; +} + +/* Reprogram chip to detect change in card state */ +/* eg, if card is detected, arm it to detect removal, and vice versa */ +static void r592_update_card_detect(struct r592_device *dev) +{ + u32 reg = r592_read_reg(dev, R592_REG_MSC); + bool card_detected = reg & R592_REG_MSC_PRSNT; + + dbg("update card detect. card state: %s", card_detected ? + "present" : "absent"); + + reg &= ~((R592_REG_MSC_IRQ_REMOVE | R592_REG_MSC_IRQ_INSERT) << 16); + + if (card_detected) + reg |= (R592_REG_MSC_IRQ_REMOVE << 16); + else + reg |= (R592_REG_MSC_IRQ_INSERT << 16); + + r592_write_reg(dev, R592_REG_MSC, reg); +} + +/* Timer routine that fires 1 second after last card detection event, */ +static void r592_detect_timer(struct timer_list *t) +{ + struct r592_device *dev = from_timer(dev, t, detect_timer); + r592_update_card_detect(dev); + memstick_detect_change(dev->host); +} + +/* Interrupt handler */ +static irqreturn_t r592_irq(int irq, void *data) +{ + struct r592_device *dev = (struct r592_device *)data; + irqreturn_t ret = IRQ_NONE; + u32 reg; + u16 irq_enable, irq_status; + unsigned long flags; + int error; + + spin_lock_irqsave(&dev->irq_lock, flags); + + reg = r592_read_reg(dev, R592_REG_MSC); + irq_enable = reg >> 16; + irq_status = reg & 0xFFFF; + + /* Ack the interrupts */ + reg &= ~irq_status; + r592_write_reg(dev, R592_REG_MSC, reg); + + /* Get the IRQ status minus bits that aren't enabled */ + irq_status &= (irq_enable); + + /* Due to limitation of memstick core, we don't look at bits that + indicate that card was removed/inserted and/or present */ + if (irq_status & (R592_REG_MSC_IRQ_INSERT | R592_REG_MSC_IRQ_REMOVE)) { + + bool card_was_added = irq_status & R592_REG_MSC_IRQ_INSERT; + ret = IRQ_HANDLED; + + message("IRQ: card %s", card_was_added ? "added" : "removed"); + + mod_timer(&dev->detect_timer, + jiffies + msecs_to_jiffies(card_was_added ? 500 : 50)); + } + + if (irq_status & + (R592_REG_MSC_FIFO_DMA_DONE | R592_REG_MSC_FIFO_DMA_ERR)) { + ret = IRQ_HANDLED; + + if (irq_status & R592_REG_MSC_FIFO_DMA_ERR) { + message("IRQ: DMA error"); + error = -EIO; + } else { + dbg_verbose("IRQ: dma done"); + error = 0; + } + + r592_stop_dma(dev, error); + complete(&dev->dma_done); + } + + spin_unlock_irqrestore(&dev->irq_lock, flags); + return ret; +} + +/* External inteface: set settings */ +static int r592_set_param(struct memstick_host *host, + enum memstick_param param, int value) +{ + struct r592_device *dev = memstick_priv(host); + + switch (param) { + case MEMSTICK_POWER: + switch (value) { + case MEMSTICK_POWER_ON: + return r592_enable_device(dev, true); + case MEMSTICK_POWER_OFF: + return r592_enable_device(dev, false); + default: + return -EINVAL; + } + case MEMSTICK_INTERFACE: + switch (value) { + case MEMSTICK_SERIAL: + return r592_set_mode(dev, 0); + case MEMSTICK_PAR4: + return r592_set_mode(dev, 1); + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +/* External interface: submit requests */ +static void r592_submit_req(struct memstick_host *host) +{ + struct r592_device *dev = memstick_priv(host); + unsigned long flags; + + if (dev->req) + return; + + spin_lock_irqsave(&dev->io_thread_lock, flags); + if (wake_up_process(dev->io_thread)) + dbg_verbose("IO thread woken to process requests"); + spin_unlock_irqrestore(&dev->io_thread_lock, flags); +} + +static const struct pci_device_id r592_pci_id_tbl[] = { + + { PCI_VDEVICE(RICOH, 0x0592), }, + { }, +}; + +/* Main entry */ +static int r592_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + int error = -ENOMEM; + struct memstick_host *host; + struct r592_device *dev; + + /* Allocate memory */ + host = memstick_alloc_host(sizeof(struct r592_device), &pdev->dev); + if (!host) + goto error1; + + dev = memstick_priv(host); + dev->host = host; + dev->pci_dev = pdev; + pci_set_drvdata(pdev, dev); + + /* pci initialization */ + error = pci_enable_device(pdev); + if (error) + goto error2; + + pci_set_master(pdev); + error = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (error) + goto error3; + + error = pci_request_regions(pdev, DRV_NAME); + if (error) + goto error3; + + dev->mmio = pci_ioremap_bar(pdev, 0); + if (!dev->mmio) { + error = -ENOMEM; + goto error4; + } + + dev->irq = pdev->irq; + spin_lock_init(&dev->irq_lock); + spin_lock_init(&dev->io_thread_lock); + init_completion(&dev->dma_done); + INIT_KFIFO(dev->pio_fifo); + timer_setup(&dev->detect_timer, r592_detect_timer, 0); + + /* Host initialization */ + host->caps = MEMSTICK_CAP_PAR4; + host->request = r592_submit_req; + host->set_param = r592_set_param; + r592_check_dma(dev); + + dev->io_thread = kthread_run(r592_process_thread, dev, "r592_io"); + if (IS_ERR(dev->io_thread)) { + error = PTR_ERR(dev->io_thread); + goto error5; + } + + /* This is just a precation, so don't fail */ + dev->dummy_dma_page = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, + &dev->dummy_dma_page_physical_address, GFP_KERNEL); + r592_stop_dma(dev , 0); + + error = request_irq(dev->irq, &r592_irq, IRQF_SHARED, + DRV_NAME, dev); + if (error) + goto error6; + + r592_update_card_detect(dev); + error = memstick_add_host(host); + if (error) + goto error7; + + message("driver successfully loaded"); + return 0; +error7: + free_irq(dev->irq, dev); +error6: + if (dev->dummy_dma_page) + dma_free_coherent(&pdev->dev, PAGE_SIZE, dev->dummy_dma_page, + dev->dummy_dma_page_physical_address); + + kthread_stop(dev->io_thread); +error5: + iounmap(dev->mmio); +error4: + pci_release_regions(pdev); +error3: + pci_disable_device(pdev); +error2: + memstick_free_host(host); +error1: + return error; +} + +static void r592_remove(struct pci_dev *pdev) +{ + int error = 0; + struct r592_device *dev = pci_get_drvdata(pdev); + + /* Stop the processing thread. + That ensures that we won't take any more requests */ + kthread_stop(dev->io_thread); + del_timer_sync(&dev->detect_timer); + r592_enable_device(dev, false); + + while (!error && dev->req) { + dev->req->error = -ETIME; + error = memstick_next_req(dev->host, &dev->req); + } + memstick_remove_host(dev->host); + + if (dev->dummy_dma_page) + dma_free_coherent(&pdev->dev, PAGE_SIZE, dev->dummy_dma_page, + dev->dummy_dma_page_physical_address); + + free_irq(dev->irq, dev); + iounmap(dev->mmio); + pci_release_regions(pdev); + pci_disable_device(pdev); + memstick_free_host(dev->host); +} + +#ifdef CONFIG_PM_SLEEP +static int r592_suspend(struct device *core_dev) +{ + struct r592_device *dev = dev_get_drvdata(core_dev); + + r592_clear_interrupts(dev); + memstick_suspend_host(dev->host); + del_timer_sync(&dev->detect_timer); + return 0; +} + +static int r592_resume(struct device *core_dev) +{ + struct r592_device *dev = dev_get_drvdata(core_dev); + + r592_clear_interrupts(dev); + r592_enable_device(dev, false); + memstick_resume_host(dev->host); + r592_update_card_detect(dev); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(r592_pm_ops, r592_suspend, r592_resume); + +MODULE_DEVICE_TABLE(pci, r592_pci_id_tbl); + +static struct pci_driver r852_pci_driver = { + .name = DRV_NAME, + .id_table = r592_pci_id_tbl, + .probe = r592_probe, + .remove = r592_remove, + .driver.pm = &r592_pm_ops, +}; + +module_pci_driver(r852_pci_driver); + +module_param_named(enable_dma, r592_enable_dma, bool, S_IRUGO); +MODULE_PARM_DESC(enable_dma, "Enable usage of the DMA (default)"); +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug level (0-3)"); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Maxim Levitsky <maximlevitsky@gmail.com>"); +MODULE_DESCRIPTION("Ricoh R5C592 Memstick/Memstick PRO card reader driver"); |