summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/twl6030-irq.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mfd/twl6030-irq.c')
-rw-r--r--drivers/mfd/twl6030-irq.c458
1 files changed, 458 insertions, 0 deletions
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
new file mode 100644
index 000000000..aff2dfbf3
--- /dev/null
+++ b/drivers/mfd/twl6030-irq.c
@@ -0,0 +1,458 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * twl6030-irq.c - TWL6030 irq support
+ *
+ * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ *
+ * Modifications to defer interrupt handling to a kernel thread:
+ * Copyright (C) 2006 MontaVista Software, Inc.
+ *
+ * Based on tlv320aic23.c:
+ * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
+ *
+ * Code cleanup and modifications to IRQ handler.
+ * by syed khasim <x0khasim@ti.com>
+ *
+ * TWL6030 specific code and IRQ handling changes by
+ * Jagadeesh Bhaskar Pakaravoor <j-pakaravoor@ti.com>
+ * Balaji T K <balajitk@ti.com>
+ */
+
+#include <linux/export.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kthread.h>
+#include <linux/mfd/twl.h>
+#include <linux/platform_device.h>
+#include <linux/suspend.h>
+#include <linux/of.h>
+#include <linux/irqdomain.h>
+#include <linux/of_device.h>
+
+#include "twl-core.h"
+
+/*
+ * TWL6030 (unlike its predecessors, which had two level interrupt handling)
+ * three interrupt registers INT_STS_A, INT_STS_B and INT_STS_C.
+ * It exposes status bits saying who has raised an interrupt. There are
+ * three mask registers that corresponds to these status registers, that
+ * enables/disables these interrupts.
+ *
+ * We set up IRQs starting at a platform-specified base. An interrupt map table,
+ * specifies mapping between interrupt number and the associated module.
+ */
+#define TWL6030_NR_IRQS 20
+
+static int twl6030_interrupt_mapping[24] = {
+ PWR_INTR_OFFSET, /* Bit 0 PWRON */
+ PWR_INTR_OFFSET, /* Bit 1 RPWRON */
+ PWR_INTR_OFFSET, /* Bit 2 BAT_VLOW */
+ RTC_INTR_OFFSET, /* Bit 3 RTC_ALARM */
+ RTC_INTR_OFFSET, /* Bit 4 RTC_PERIOD */
+ HOTDIE_INTR_OFFSET, /* Bit 5 HOT_DIE */
+ SMPSLDO_INTR_OFFSET, /* Bit 6 VXXX_SHORT */
+ SMPSLDO_INTR_OFFSET, /* Bit 7 VMMC_SHORT */
+
+ SMPSLDO_INTR_OFFSET, /* Bit 8 VUSIM_SHORT */
+ BATDETECT_INTR_OFFSET, /* Bit 9 BAT */
+ SIMDETECT_INTR_OFFSET, /* Bit 10 SIM */
+ MMCDETECT_INTR_OFFSET, /* Bit 11 MMC */
+ RSV_INTR_OFFSET, /* Bit 12 Reserved */
+ MADC_INTR_OFFSET, /* Bit 13 GPADC_RT_EOC */
+ MADC_INTR_OFFSET, /* Bit 14 GPADC_SW_EOC */
+ GASGAUGE_INTR_OFFSET, /* Bit 15 CC_AUTOCAL */
+
+ USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */
+ USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */
+ USBOTG_INTR_OFFSET, /* Bit 18 ID */
+ USB_PRES_INTR_OFFSET, /* Bit 19 VBUS */
+ CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */
+ CHARGERFAULT_INTR_OFFSET, /* Bit 21 EXT_CHRG */
+ CHARGERFAULT_INTR_OFFSET, /* Bit 22 INT_CHRG */
+ RSV_INTR_OFFSET, /* Bit 23 Reserved */
+};
+
+static int twl6032_interrupt_mapping[24] = {
+ PWR_INTR_OFFSET, /* Bit 0 PWRON */
+ PWR_INTR_OFFSET, /* Bit 1 RPWRON */
+ PWR_INTR_OFFSET, /* Bit 2 SYS_VLOW */
+ RTC_INTR_OFFSET, /* Bit 3 RTC_ALARM */
+ RTC_INTR_OFFSET, /* Bit 4 RTC_PERIOD */
+ HOTDIE_INTR_OFFSET, /* Bit 5 HOT_DIE */
+ SMPSLDO_INTR_OFFSET, /* Bit 6 VXXX_SHORT */
+ PWR_INTR_OFFSET, /* Bit 7 SPDURATION */
+
+ PWR_INTR_OFFSET, /* Bit 8 WATCHDOG */
+ BATDETECT_INTR_OFFSET, /* Bit 9 BAT */
+ SIMDETECT_INTR_OFFSET, /* Bit 10 SIM */
+ MMCDETECT_INTR_OFFSET, /* Bit 11 MMC */
+ MADC_INTR_OFFSET, /* Bit 12 GPADC_RT_EOC */
+ MADC_INTR_OFFSET, /* Bit 13 GPADC_SW_EOC */
+ GASGAUGE_INTR_OFFSET, /* Bit 14 CC_EOC */
+ GASGAUGE_INTR_OFFSET, /* Bit 15 CC_AUTOCAL */
+
+ USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */
+ USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */
+ USBOTG_INTR_OFFSET, /* Bit 18 ID */
+ USB_PRES_INTR_OFFSET, /* Bit 19 VBUS */
+ CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */
+ CHARGERFAULT_INTR_OFFSET, /* Bit 21 EXT_CHRG */
+ CHARGERFAULT_INTR_OFFSET, /* Bit 22 INT_CHRG */
+ RSV_INTR_OFFSET, /* Bit 23 Reserved */
+};
+
+/*----------------------------------------------------------------------*/
+
+struct twl6030_irq {
+ unsigned int irq_base;
+ int twl_irq;
+ bool irq_wake_enabled;
+ atomic_t wakeirqs;
+ struct notifier_block pm_nb;
+ struct irq_chip irq_chip;
+ struct irq_domain *irq_domain;
+ const int *irq_mapping_tbl;
+};
+
+static struct twl6030_irq *twl6030_irq;
+
+static int twl6030_irq_pm_notifier(struct notifier_block *notifier,
+ unsigned long pm_event, void *unused)
+{
+ int chained_wakeups;
+ struct twl6030_irq *pdata = container_of(notifier, struct twl6030_irq,
+ pm_nb);
+
+ switch (pm_event) {
+ case PM_SUSPEND_PREPARE:
+ chained_wakeups = atomic_read(&pdata->wakeirqs);
+
+ if (chained_wakeups && !pdata->irq_wake_enabled) {
+ if (enable_irq_wake(pdata->twl_irq))
+ pr_err("twl6030 IRQ wake enable failed\n");
+ else
+ pdata->irq_wake_enabled = true;
+ } else if (!chained_wakeups && pdata->irq_wake_enabled) {
+ disable_irq_wake(pdata->twl_irq);
+ pdata->irq_wake_enabled = false;
+ }
+
+ disable_irq(pdata->twl_irq);
+ break;
+
+ case PM_POST_SUSPEND:
+ enable_irq(pdata->twl_irq);
+ break;
+
+ default:
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+/*
+* Threaded irq handler for the twl6030 interrupt.
+* We query the interrupt controller in the twl6030 to determine
+* which module is generating the interrupt request and call
+* handle_nested_irq for that module.
+*/
+static irqreturn_t twl6030_irq_thread(int irq, void *data)
+{
+ int i, ret;
+ union {
+ u8 bytes[4];
+ __le32 int_sts;
+ } sts;
+ u32 int_sts; /* sts.int_sts converted to CPU endianness */
+ struct twl6030_irq *pdata = data;
+
+ /* read INT_STS_A, B and C in one shot using a burst read */
+ ret = twl_i2c_read(TWL_MODULE_PIH, sts.bytes, REG_INT_STS_A, 3);
+ if (ret) {
+ pr_warn("twl6030_irq: I2C error %d reading PIH ISR\n", ret);
+ return IRQ_HANDLED;
+ }
+
+ sts.bytes[3] = 0; /* Only 24 bits are valid*/
+
+ /*
+ * Since VBUS status bit is not reliable for VBUS disconnect
+ * use CHARGER VBUS detection status bit instead.
+ */
+ if (sts.bytes[2] & 0x10)
+ sts.bytes[2] |= 0x08;
+
+ int_sts = le32_to_cpu(sts.int_sts);
+ for (i = 0; int_sts; int_sts >>= 1, i++)
+ if (int_sts & 0x1) {
+ int module_irq =
+ irq_find_mapping(pdata->irq_domain,
+ pdata->irq_mapping_tbl[i]);
+ if (module_irq)
+ handle_nested_irq(module_irq);
+ else
+ pr_err("twl6030_irq: Unmapped PIH ISR %u detected\n",
+ i);
+ pr_debug("twl6030_irq: PIH ISR %u, virq%u\n",
+ i, module_irq);
+ }
+
+ /*
+ * NOTE:
+ * Simulation confirms that documentation is wrong w.r.t the
+ * interrupt status clear operation. A single *byte* write to
+ * any one of STS_A to STS_C register results in all three
+ * STS registers being reset. Since it does not matter which
+ * value is written, all three registers are cleared on a
+ * single byte write, so we just use 0x0 to clear.
+ */
+ ret = twl_i2c_write_u8(TWL_MODULE_PIH, 0x00, REG_INT_STS_A);
+ if (ret)
+ pr_warn("twl6030_irq: I2C error in clearing PIH ISR\n");
+
+ return IRQ_HANDLED;
+}
+
+/*----------------------------------------------------------------------*/
+
+static int twl6030_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+ struct twl6030_irq *pdata = irq_data_get_irq_chip_data(d);
+
+ if (on)
+ atomic_inc(&pdata->wakeirqs);
+ else
+ atomic_dec(&pdata->wakeirqs);
+
+ return 0;
+}
+
+int twl6030_interrupt_unmask(u8 bit_mask, u8 offset)
+{
+ int ret;
+ u8 unmask_value;
+
+ ret = twl_i2c_read_u8(TWL_MODULE_PIH, &unmask_value,
+ REG_INT_STS_A + offset);
+ unmask_value &= (~(bit_mask));
+ ret |= twl_i2c_write_u8(TWL_MODULE_PIH, unmask_value,
+ REG_INT_STS_A + offset); /* unmask INT_MSK_A/B/C */
+ return ret;
+}
+EXPORT_SYMBOL(twl6030_interrupt_unmask);
+
+int twl6030_interrupt_mask(u8 bit_mask, u8 offset)
+{
+ int ret;
+ u8 mask_value;
+
+ ret = twl_i2c_read_u8(TWL_MODULE_PIH, &mask_value,
+ REG_INT_STS_A + offset);
+ mask_value |= (bit_mask);
+ ret |= twl_i2c_write_u8(TWL_MODULE_PIH, mask_value,
+ REG_INT_STS_A + offset); /* mask INT_MSK_A/B/C */
+ return ret;
+}
+EXPORT_SYMBOL(twl6030_interrupt_mask);
+
+int twl6030_mmc_card_detect_config(void)
+{
+ int ret;
+ u8 reg_val = 0;
+
+ /* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */
+ twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
+ REG_INT_MSK_LINE_B);
+ twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
+ REG_INT_MSK_STS_B);
+ /*
+ * Initially Configuring MMC_CTRL for receiving interrupts &
+ * Card status on TWL6030 for MMC1
+ */
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val, TWL6030_MMCCTRL);
+ if (ret < 0) {
+ pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret);
+ return ret;
+ }
+ reg_val &= ~VMMC_AUTO_OFF;
+ reg_val |= SW_FC;
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL);
+ if (ret < 0) {
+ pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret);
+ return ret;
+ }
+
+ /* Configuring PullUp-PullDown register */
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val,
+ TWL6030_CFG_INPUT_PUPD3);
+ if (ret < 0) {
+ pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n",
+ ret);
+ return ret;
+ }
+ reg_val &= ~(MMC_PU | MMC_PD);
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val,
+ TWL6030_CFG_INPUT_PUPD3);
+ if (ret < 0) {
+ pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error %d\n",
+ ret);
+ return ret;
+ }
+
+ return irq_find_mapping(twl6030_irq->irq_domain,
+ MMCDETECT_INTR_OFFSET);
+}
+EXPORT_SYMBOL(twl6030_mmc_card_detect_config);
+
+int twl6030_mmc_card_detect(struct device *dev, int slot)
+{
+ int ret = -EIO;
+ u8 read_reg = 0;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if (pdev->id) {
+ /* TWL6030 provide's Card detect support for
+ * only MMC1 controller.
+ */
+ pr_err("Unknown MMC controller %d in %s\n", pdev->id, __func__);
+ return ret;
+ }
+ /*
+ * BIT0 of MMC_CTRL on TWL6030 provides card status for MMC1
+ * 0 - Card not present ,1 - Card present
+ */
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg,
+ TWL6030_MMCCTRL);
+ if (ret >= 0)
+ ret = read_reg & STS_MMC;
+ return ret;
+}
+EXPORT_SYMBOL(twl6030_mmc_card_detect);
+
+static int twl6030_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ struct twl6030_irq *pdata = d->host_data;
+
+ irq_set_chip_data(virq, pdata);
+ irq_set_chip_and_handler(virq, &pdata->irq_chip, handle_simple_irq);
+ irq_set_nested_thread(virq, true);
+ irq_set_parent(virq, pdata->twl_irq);
+ irq_set_noprobe(virq);
+
+ return 0;
+}
+
+static void twl6030_irq_unmap(struct irq_domain *d, unsigned int virq)
+{
+ irq_set_chip_and_handler(virq, NULL, NULL);
+ irq_set_chip_data(virq, NULL);
+}
+
+static const struct irq_domain_ops twl6030_irq_domain_ops = {
+ .map = twl6030_irq_map,
+ .unmap = twl6030_irq_unmap,
+ .xlate = irq_domain_xlate_onetwocell,
+};
+
+static const struct of_device_id twl6030_of_match[] = {
+ {.compatible = "ti,twl6030", &twl6030_interrupt_mapping},
+ {.compatible = "ti,twl6032", &twl6032_interrupt_mapping},
+ { },
+};
+
+int twl6030_init_irq(struct device *dev, int irq_num)
+{
+ struct device_node *node = dev->of_node;
+ int nr_irqs;
+ int status;
+ u8 mask[3];
+ const struct of_device_id *of_id;
+
+ of_id = of_match_device(twl6030_of_match, dev);
+ if (!of_id || !of_id->data) {
+ dev_err(dev, "Unknown TWL device model\n");
+ return -EINVAL;
+ }
+
+ nr_irqs = TWL6030_NR_IRQS;
+
+ twl6030_irq = devm_kzalloc(dev, sizeof(*twl6030_irq), GFP_KERNEL);
+ if (!twl6030_irq)
+ return -ENOMEM;
+
+ mask[0] = 0xFF;
+ mask[1] = 0xFF;
+ mask[2] = 0xFF;
+
+ /* mask all int lines */
+ status = twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_LINE_A, 3);
+ /* mask all int sts */
+ status |= twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_STS_A, 3);
+ /* clear INT_STS_A,B,C */
+ status |= twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_STS_A, 3);
+
+ if (status < 0) {
+ dev_err(dev, "I2C err writing TWL_MODULE_PIH: %d\n", status);
+ return status;
+ }
+
+ /*
+ * install an irq handler for each of the modules;
+ * clone dummy irq_chip since PIH can't *do* anything
+ */
+ twl6030_irq->irq_chip = dummy_irq_chip;
+ twl6030_irq->irq_chip.name = "twl6030";
+ twl6030_irq->irq_chip.irq_set_type = NULL;
+ twl6030_irq->irq_chip.irq_set_wake = twl6030_irq_set_wake;
+
+ twl6030_irq->pm_nb.notifier_call = twl6030_irq_pm_notifier;
+ atomic_set(&twl6030_irq->wakeirqs, 0);
+ twl6030_irq->irq_mapping_tbl = of_id->data;
+
+ twl6030_irq->irq_domain =
+ irq_domain_add_linear(node, nr_irqs,
+ &twl6030_irq_domain_ops, twl6030_irq);
+ if (!twl6030_irq->irq_domain) {
+ dev_err(dev, "Can't add irq_domain\n");
+ return -ENOMEM;
+ }
+
+ dev_info(dev, "PIH (irq %d) nested IRQs\n", irq_num);
+
+ /* install an irq handler to demultiplex the TWL6030 interrupt */
+ status = request_threaded_irq(irq_num, NULL, twl6030_irq_thread,
+ IRQF_ONESHOT, "TWL6030-PIH", twl6030_irq);
+ if (status < 0) {
+ dev_err(dev, "could not claim irq %d: %d\n", irq_num, status);
+ goto fail_irq;
+ }
+
+ twl6030_irq->twl_irq = irq_num;
+ register_pm_notifier(&twl6030_irq->pm_nb);
+ return 0;
+
+fail_irq:
+ irq_domain_remove(twl6030_irq->irq_domain);
+ return status;
+}
+
+int twl6030_exit_irq(void)
+{
+ if (twl6030_irq && twl6030_irq->twl_irq) {
+ unregister_pm_notifier(&twl6030_irq->pm_nb);
+ free_irq(twl6030_irq->twl_irq, NULL);
+ /*
+ * TODO: IRQ domain and allocated nested IRQ descriptors
+ * should be freed somehow here. Now It can't be done, because
+ * child devices will not be deleted during removing of
+ * TWL Core driver and they will still contain allocated
+ * virt IRQs in their Resources tables.
+ * The same prevents us from using devm_request_threaded_irq()
+ * in this module.
+ */
+ }
+ return 0;
+}
+
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 23:28:13 +0000