summaryrefslogtreecommitdiffstats
path: root/drivers/misc/eeprom/ee1004.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/misc/eeprom/ee1004.c290
1 files changed, 290 insertions, 0 deletions
diff --git a/drivers/misc/eeprom/ee1004.c b/drivers/misc/eeprom/ee1004.c
new file mode 100644
index 000000000..d9f90332a
--- /dev/null
+++ b/drivers/misc/eeprom/ee1004.c
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ee1004 - driver for DDR4 SPD EEPROMs
+ *
+ * Copyright (C) 2017-2019 Jean Delvare
+ *
+ * Based on the at24 driver:
+ * Copyright (C) 2005-2007 David Brownell
+ * Copyright (C) 2008 Wolfram Sang, Pengutronix
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+
+/*
+ * DDR4 memory modules use special EEPROMs following the Jedec EE1004
+ * specification. These are 512-byte EEPROMs using a single I2C address
+ * in the 0x50-0x57 range for data. One of two 256-byte page is selected
+ * by writing a command to I2C address 0x36 or 0x37 on the same I2C bus.
+ *
+ * Therefore we need to request these 2 additional addresses, and serialize
+ * access to all such EEPROMs with a single mutex.
+ *
+ * We assume it is safe to read up to 32 bytes at once from these EEPROMs.
+ * We use SMBus access even if I2C is available, these EEPROMs are small
+ * enough, and reading from them infrequent enough, that we favor simplicity
+ * over performance.
+ */
+
+#define EE1004_ADDR_SET_PAGE 0x36
+#define EE1004_EEPROM_SIZE 512
+#define EE1004_PAGE_SIZE 256
+#define EE1004_PAGE_SHIFT 8
+
+/*
+ * Mutex protects ee1004_set_page and ee1004_dev_count, and must be held
+ * from page selection to end of read.
+ */
+static DEFINE_MUTEX(ee1004_bus_lock);
+static struct i2c_client *ee1004_set_page[2];
+static unsigned int ee1004_dev_count;
+static int ee1004_current_page;
+
+static const struct i2c_device_id ee1004_ids[] = {
+ { "ee1004", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ee1004_ids);
+
+/*-------------------------------------------------------------------------*/
+
+static int ee1004_get_current_page(void)
+{
+ int err;
+
+ err = i2c_smbus_read_byte(ee1004_set_page[0]);
+ if (err == -ENXIO) {
+ /* Nack means page 1 is selected */
+ return 1;
+ }
+ if (err < 0) {
+ /* Anything else is a real error, bail out */
+ return err;
+ }
+
+ /* Ack means page 0 is selected, returned value meaningless */
+ return 0;
+}
+
+static ssize_t ee1004_eeprom_read(struct i2c_client *client, char *buf,
+ unsigned int offset, size_t count)
+{
+ int status;
+
+ if (count > I2C_SMBUS_BLOCK_MAX)
+ count = I2C_SMBUS_BLOCK_MAX;
+ /* Can't cross page boundaries */
+ if (unlikely(offset + count > EE1004_PAGE_SIZE))
+ count = EE1004_PAGE_SIZE - offset;
+
+ if (count > I2C_SMBUS_BLOCK_MAX)
+ count = I2C_SMBUS_BLOCK_MAX;
+
+ status = i2c_smbus_read_i2c_block_data_or_emulated(client, offset,
+ count, buf);
+ dev_dbg(&client->dev, "read %zu@%d --> %d\n", count, offset, status);
+
+ return status;
+}
+
+static ssize_t ee1004_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = kobj_to_dev(kobj);
+ struct i2c_client *client = to_i2c_client(dev);
+ size_t requested = count;
+ int page;
+
+ if (unlikely(!count))
+ return count;
+
+ page = off >> EE1004_PAGE_SHIFT;
+ if (unlikely(page > 1))
+ return 0;
+ off &= (1 << EE1004_PAGE_SHIFT) - 1;
+
+ /*
+ * Read data from chip, protecting against concurrent access to
+ * other EE1004 SPD EEPROMs on the same adapter.
+ */
+ mutex_lock(&ee1004_bus_lock);
+
+ while (count) {
+ int status;
+
+ /* Select page */
+ if (page != ee1004_current_page) {
+ /* Data is ignored */
+ status = i2c_smbus_write_byte(ee1004_set_page[page],
+ 0x00);
+ if (status == -ENXIO) {
+ /*
+ * Don't give up just yet. Some memory
+ * modules will select the page but not
+ * ack the command. Check which page is
+ * selected now.
+ */
+ if (ee1004_get_current_page() == page)
+ status = 0;
+ }
+ if (status < 0) {
+ dev_err(dev, "Failed to select page %d (%d)\n",
+ page, status);
+ mutex_unlock(&ee1004_bus_lock);
+ return status;
+ }
+ dev_dbg(dev, "Selected page %d\n", page);
+ ee1004_current_page = page;
+ }
+
+ status = ee1004_eeprom_read(client, buf, off, count);
+ if (status < 0) {
+ mutex_unlock(&ee1004_bus_lock);
+ return status;
+ }
+ buf += status;
+ off += status;
+ count -= status;
+
+ if (off == EE1004_PAGE_SIZE) {
+ page++;
+ off = 0;
+ }
+ }
+
+ mutex_unlock(&ee1004_bus_lock);
+
+ return requested;
+}
+
+static const struct bin_attribute eeprom_attr = {
+ .attr = {
+ .name = "eeprom",
+ .mode = 0444,
+ },
+ .size = EE1004_EEPROM_SIZE,
+ .read = ee1004_read,
+};
+
+static int ee1004_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int err, cnr = 0;
+ const char *slow = NULL;
+
+ /* Make sure we can operate on this adapter */
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_BYTE |
+ I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+ if (i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_BYTE |
+ I2C_FUNC_SMBUS_READ_WORD_DATA))
+ slow = "word";
+ else if (i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_BYTE |
+ I2C_FUNC_SMBUS_READ_BYTE_DATA))
+ slow = "byte";
+ else
+ return -EPFNOSUPPORT;
+ }
+
+ /* Use 2 dummy devices for page select command */
+ mutex_lock(&ee1004_bus_lock);
+ if (++ee1004_dev_count == 1) {
+ for (cnr = 0; cnr < 2; cnr++) {
+ ee1004_set_page[cnr] = i2c_new_dummy_device(client->adapter,
+ EE1004_ADDR_SET_PAGE + cnr);
+ if (IS_ERR(ee1004_set_page[cnr])) {
+ dev_err(&client->dev,
+ "address 0x%02x unavailable\n",
+ EE1004_ADDR_SET_PAGE + cnr);
+ err = PTR_ERR(ee1004_set_page[cnr]);
+ goto err_clients;
+ }
+ }
+ } else if (i2c_adapter_id(client->adapter) !=
+ i2c_adapter_id(ee1004_set_page[0]->adapter)) {
+ dev_err(&client->dev,
+ "Driver only supports devices on a single I2C bus\n");
+ err = -EOPNOTSUPP;
+ goto err_clients;
+ }
+
+ /* Remember current page to avoid unneeded page select */
+ err = ee1004_get_current_page();
+ if (err < 0)
+ goto err_clients;
+ ee1004_current_page = err;
+ dev_dbg(&client->dev, "Currently selected page: %d\n",
+ ee1004_current_page);
+ mutex_unlock(&ee1004_bus_lock);
+
+ /* Create the sysfs eeprom file */
+ err = sysfs_create_bin_file(&client->dev.kobj, &eeprom_attr);
+ if (err)
+ goto err_clients_lock;
+
+ dev_info(&client->dev,
+ "%u byte EE1004-compliant SPD EEPROM, read-only\n",
+ EE1004_EEPROM_SIZE);
+ if (slow)
+ dev_notice(&client->dev,
+ "Falling back to %s reads, performance will suffer\n",
+ slow);
+
+ return 0;
+
+ err_clients_lock:
+ mutex_lock(&ee1004_bus_lock);
+ err_clients:
+ if (--ee1004_dev_count == 0) {
+ for (cnr--; cnr >= 0; cnr--) {
+ i2c_unregister_device(ee1004_set_page[cnr]);
+ ee1004_set_page[cnr] = NULL;
+ }
+ }
+ mutex_unlock(&ee1004_bus_lock);
+
+ return err;
+}
+
+static int ee1004_remove(struct i2c_client *client)
+{
+ int i;
+
+ sysfs_remove_bin_file(&client->dev.kobj, &eeprom_attr);
+
+ /* Remove page select clients if this is the last device */
+ mutex_lock(&ee1004_bus_lock);
+ if (--ee1004_dev_count == 0) {
+ for (i = 0; i < 2; i++) {
+ i2c_unregister_device(ee1004_set_page[i]);
+ ee1004_set_page[i] = NULL;
+ }
+ }
+ mutex_unlock(&ee1004_bus_lock);
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct i2c_driver ee1004_driver = {
+ .driver = {
+ .name = "ee1004",
+ },
+ .probe = ee1004_probe,
+ .remove = ee1004_remove,
+ .id_table = ee1004_ids,
+};
+module_i2c_driver(ee1004_driver);
+
+MODULE_DESCRIPTION("Driver for EE1004-compliant DDR4 SPD EEPROMs");
+MODULE_AUTHOR("Jean Delvare");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 22:36:22 +0000