summaryrefslogtreecommitdiffstats
path: root/drivers/misc/mei/hw-me.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc/mei/hw-me.c')
-rw-r--r--drivers/misc/mei/hw-me.c1633
1 files changed, 1633 insertions, 0 deletions
diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c
new file mode 100644
index 000000000..cda0829ac
--- /dev/null
+++ b/drivers/misc/mei/hw-me.c
@@ -0,0 +1,1633 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2003-2020, Intel Corporation. All rights reserved.
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ */
+
+#include <linux/pci.h>
+
+#include <linux/kthread.h>
+#include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
+#include <linux/sizes.h>
+
+#include "mei_dev.h"
+#include "hbm.h"
+
+#include "hw-me.h"
+#include "hw-me-regs.h"
+
+#include "mei-trace.h"
+
+/**
+ * mei_me_reg_read - Reads 32bit data from the mei device
+ *
+ * @hw: the me hardware structure
+ * @offset: offset from which to read the data
+ *
+ * Return: register value (u32)
+ */
+static inline u32 mei_me_reg_read(const struct mei_me_hw *hw,
+ unsigned long offset)
+{
+ return ioread32(hw->mem_addr + offset);
+}
+
+
+/**
+ * mei_me_reg_write - Writes 32bit data to the mei device
+ *
+ * @hw: the me hardware structure
+ * @offset: offset from which to write the data
+ * @value: register value to write (u32)
+ */
+static inline void mei_me_reg_write(const struct mei_me_hw *hw,
+ unsigned long offset, u32 value)
+{
+ iowrite32(value, hw->mem_addr + offset);
+}
+
+/**
+ * mei_me_mecbrw_read - Reads 32bit data from ME circular buffer
+ * read window register
+ *
+ * @dev: the device structure
+ *
+ * Return: ME_CB_RW register value (u32)
+ */
+static inline u32 mei_me_mecbrw_read(const struct mei_device *dev)
+{
+ return mei_me_reg_read(to_me_hw(dev), ME_CB_RW);
+}
+
+/**
+ * mei_me_hcbww_write - write 32bit data to the host circular buffer
+ *
+ * @dev: the device structure
+ * @data: 32bit data to be written to the host circular buffer
+ */
+static inline void mei_me_hcbww_write(struct mei_device *dev, u32 data)
+{
+ mei_me_reg_write(to_me_hw(dev), H_CB_WW, data);
+}
+
+/**
+ * mei_me_mecsr_read - Reads 32bit data from the ME CSR
+ *
+ * @dev: the device structure
+ *
+ * Return: ME_CSR_HA register value (u32)
+ */
+static inline u32 mei_me_mecsr_read(const struct mei_device *dev)
+{
+ u32 reg;
+
+ reg = mei_me_reg_read(to_me_hw(dev), ME_CSR_HA);
+ trace_mei_reg_read(dev->dev, "ME_CSR_HA", ME_CSR_HA, reg);
+
+ return reg;
+}
+
+/**
+ * mei_hcsr_read - Reads 32bit data from the host CSR
+ *
+ * @dev: the device structure
+ *
+ * Return: H_CSR register value (u32)
+ */
+static inline u32 mei_hcsr_read(const struct mei_device *dev)
+{
+ u32 reg;
+
+ reg = mei_me_reg_read(to_me_hw(dev), H_CSR);
+ trace_mei_reg_read(dev->dev, "H_CSR", H_CSR, reg);
+
+ return reg;
+}
+
+/**
+ * mei_hcsr_write - writes H_CSR register to the mei device
+ *
+ * @dev: the device structure
+ * @reg: new register value
+ */
+static inline void mei_hcsr_write(struct mei_device *dev, u32 reg)
+{
+ trace_mei_reg_write(dev->dev, "H_CSR", H_CSR, reg);
+ mei_me_reg_write(to_me_hw(dev), H_CSR, reg);
+}
+
+/**
+ * mei_hcsr_set - writes H_CSR register to the mei device,
+ * and ignores the H_IS bit for it is write-one-to-zero.
+ *
+ * @dev: the device structure
+ * @reg: new register value
+ */
+static inline void mei_hcsr_set(struct mei_device *dev, u32 reg)
+{
+ reg &= ~H_CSR_IS_MASK;
+ mei_hcsr_write(dev, reg);
+}
+
+/**
+ * mei_hcsr_set_hig - set host interrupt (set H_IG)
+ *
+ * @dev: the device structure
+ */
+static inline void mei_hcsr_set_hig(struct mei_device *dev)
+{
+ u32 hcsr;
+
+ hcsr = mei_hcsr_read(dev) | H_IG;
+ mei_hcsr_set(dev, hcsr);
+}
+
+/**
+ * mei_me_d0i3c_read - Reads 32bit data from the D0I3C register
+ *
+ * @dev: the device structure
+ *
+ * Return: H_D0I3C register value (u32)
+ */
+static inline u32 mei_me_d0i3c_read(const struct mei_device *dev)
+{
+ u32 reg;
+
+ reg = mei_me_reg_read(to_me_hw(dev), H_D0I3C);
+ trace_mei_reg_read(dev->dev, "H_D0I3C", H_D0I3C, reg);
+
+ return reg;
+}
+
+/**
+ * mei_me_d0i3c_write - writes H_D0I3C register to device
+ *
+ * @dev: the device structure
+ * @reg: new register value
+ */
+static inline void mei_me_d0i3c_write(struct mei_device *dev, u32 reg)
+{
+ trace_mei_reg_write(dev->dev, "H_D0I3C", H_D0I3C, reg);
+ mei_me_reg_write(to_me_hw(dev), H_D0I3C, reg);
+}
+
+/**
+ * mei_me_trc_status - read trc status register
+ *
+ * @dev: mei device
+ * @trc: trc status register value
+ *
+ * Return: 0 on success, error otherwise
+ */
+static int mei_me_trc_status(struct mei_device *dev, u32 *trc)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+
+ if (!hw->cfg->hw_trc_supported)
+ return -EOPNOTSUPP;
+
+ *trc = mei_me_reg_read(hw, ME_TRC);
+ trace_mei_reg_read(dev->dev, "ME_TRC", ME_TRC, *trc);
+
+ return 0;
+}
+
+/**
+ * mei_me_fw_status - read fw status register from pci config space
+ *
+ * @dev: mei device
+ * @fw_status: fw status register values
+ *
+ * Return: 0 on success, error otherwise
+ */
+static int mei_me_fw_status(struct mei_device *dev,
+ struct mei_fw_status *fw_status)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ const struct mei_fw_status *fw_src = &hw->cfg->fw_status;
+ int ret;
+ int i;
+
+ if (!fw_status || !hw->read_fws)
+ return -EINVAL;
+
+ fw_status->count = fw_src->count;
+ for (i = 0; i < fw_src->count && i < MEI_FW_STATUS_MAX; i++) {
+ ret = hw->read_fws(dev, fw_src->status[i],
+ &fw_status->status[i]);
+ trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HFS_X",
+ fw_src->status[i],
+ fw_status->status[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * mei_me_hw_config - configure hw dependent settings
+ *
+ * @dev: mei device
+ *
+ * Return:
+ * * -EINVAL when read_fws is not set
+ * * 0 on success
+ *
+ */
+static int mei_me_hw_config(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ u32 hcsr, reg;
+
+ if (WARN_ON(!hw->read_fws))
+ return -EINVAL;
+
+ /* Doesn't change in runtime */
+ hcsr = mei_hcsr_read(dev);
+ hw->hbuf_depth = (hcsr & H_CBD) >> 24;
+
+ reg = 0;
+ hw->read_fws(dev, PCI_CFG_HFS_1, &reg);
+ trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HFS_1", PCI_CFG_HFS_1, reg);
+ hw->d0i3_supported =
+ ((reg & PCI_CFG_HFS_1_D0I3_MSK) == PCI_CFG_HFS_1_D0I3_MSK);
+
+ hw->pg_state = MEI_PG_OFF;
+ if (hw->d0i3_supported) {
+ reg = mei_me_d0i3c_read(dev);
+ if (reg & H_D0I3C_I3)
+ hw->pg_state = MEI_PG_ON;
+ }
+
+ return 0;
+}
+
+/**
+ * mei_me_pg_state - translate internal pg state
+ * to the mei power gating state
+ *
+ * @dev: mei device
+ *
+ * Return: MEI_PG_OFF if aliveness is on and MEI_PG_ON otherwise
+ */
+static inline enum mei_pg_state mei_me_pg_state(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+
+ return hw->pg_state;
+}
+
+static inline u32 me_intr_src(u32 hcsr)
+{
+ return hcsr & H_CSR_IS_MASK;
+}
+
+/**
+ * me_intr_disable - disables mei device interrupts
+ * using supplied hcsr register value.
+ *
+ * @dev: the device structure
+ * @hcsr: supplied hcsr register value
+ */
+static inline void me_intr_disable(struct mei_device *dev, u32 hcsr)
+{
+ hcsr &= ~H_CSR_IE_MASK;
+ mei_hcsr_set(dev, hcsr);
+}
+
+/**
+ * me_intr_clear - clear and stop interrupts
+ *
+ * @dev: the device structure
+ * @hcsr: supplied hcsr register value
+ */
+static inline void me_intr_clear(struct mei_device *dev, u32 hcsr)
+{
+ if (me_intr_src(hcsr))
+ mei_hcsr_write(dev, hcsr);
+}
+
+/**
+ * mei_me_intr_clear - clear and stop interrupts
+ *
+ * @dev: the device structure
+ */
+static void mei_me_intr_clear(struct mei_device *dev)
+{
+ u32 hcsr = mei_hcsr_read(dev);
+
+ me_intr_clear(dev, hcsr);
+}
+/**
+ * mei_me_intr_enable - enables mei device interrupts
+ *
+ * @dev: the device structure
+ */
+static void mei_me_intr_enable(struct mei_device *dev)
+{
+ u32 hcsr = mei_hcsr_read(dev);
+
+ hcsr |= H_CSR_IE_MASK;
+ mei_hcsr_set(dev, hcsr);
+}
+
+/**
+ * mei_me_intr_disable - disables mei device interrupts
+ *
+ * @dev: the device structure
+ */
+static void mei_me_intr_disable(struct mei_device *dev)
+{
+ u32 hcsr = mei_hcsr_read(dev);
+
+ me_intr_disable(dev, hcsr);
+}
+
+/**
+ * mei_me_synchronize_irq - wait for pending IRQ handlers
+ *
+ * @dev: the device structure
+ */
+static void mei_me_synchronize_irq(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+
+ synchronize_irq(hw->irq);
+}
+
+/**
+ * mei_me_hw_reset_release - release device from the reset
+ *
+ * @dev: the device structure
+ */
+static void mei_me_hw_reset_release(struct mei_device *dev)
+{
+ u32 hcsr = mei_hcsr_read(dev);
+
+ hcsr |= H_IG;
+ hcsr &= ~H_RST;
+ mei_hcsr_set(dev, hcsr);
+}
+
+/**
+ * mei_me_host_set_ready - enable device
+ *
+ * @dev: mei device
+ */
+static void mei_me_host_set_ready(struct mei_device *dev)
+{
+ u32 hcsr = mei_hcsr_read(dev);
+
+ hcsr |= H_CSR_IE_MASK | H_IG | H_RDY;
+ mei_hcsr_set(dev, hcsr);
+}
+
+/**
+ * mei_me_host_is_ready - check whether the host has turned ready
+ *
+ * @dev: mei device
+ * Return: bool
+ */
+static bool mei_me_host_is_ready(struct mei_device *dev)
+{
+ u32 hcsr = mei_hcsr_read(dev);
+
+ return (hcsr & H_RDY) == H_RDY;
+}
+
+/**
+ * mei_me_hw_is_ready - check whether the me(hw) has turned ready
+ *
+ * @dev: mei device
+ * Return: bool
+ */
+static bool mei_me_hw_is_ready(struct mei_device *dev)
+{
+ u32 mecsr = mei_me_mecsr_read(dev);
+
+ return (mecsr & ME_RDY_HRA) == ME_RDY_HRA;
+}
+
+/**
+ * mei_me_hw_is_resetting - check whether the me(hw) is in reset
+ *
+ * @dev: mei device
+ * Return: bool
+ */
+static bool mei_me_hw_is_resetting(struct mei_device *dev)
+{
+ u32 mecsr = mei_me_mecsr_read(dev);
+
+ return (mecsr & ME_RST_HRA) == ME_RST_HRA;
+}
+
+/**
+ * mei_me_hw_ready_wait - wait until the me(hw) has turned ready
+ * or timeout is reached
+ *
+ * @dev: mei device
+ * Return: 0 on success, error otherwise
+ */
+static int mei_me_hw_ready_wait(struct mei_device *dev)
+{
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_hw_ready,
+ dev->recvd_hw_ready,
+ mei_secs_to_jiffies(MEI_HW_READY_TIMEOUT));
+ mutex_lock(&dev->device_lock);
+ if (!dev->recvd_hw_ready) {
+ dev_err(dev->dev, "wait hw ready failed\n");
+ return -ETIME;
+ }
+
+ mei_me_hw_reset_release(dev);
+ dev->recvd_hw_ready = false;
+ return 0;
+}
+
+/**
+ * mei_me_hw_start - hw start routine
+ *
+ * @dev: mei device
+ * Return: 0 on success, error otherwise
+ */
+static int mei_me_hw_start(struct mei_device *dev)
+{
+ int ret = mei_me_hw_ready_wait(dev);
+
+ if (ret)
+ return ret;
+ dev_dbg(dev->dev, "hw is ready\n");
+
+ mei_me_host_set_ready(dev);
+ return ret;
+}
+
+
+/**
+ * mei_hbuf_filled_slots - gets number of device filled buffer slots
+ *
+ * @dev: the device structure
+ *
+ * Return: number of filled slots
+ */
+static unsigned char mei_hbuf_filled_slots(struct mei_device *dev)
+{
+ u32 hcsr;
+ char read_ptr, write_ptr;
+
+ hcsr = mei_hcsr_read(dev);
+
+ read_ptr = (char) ((hcsr & H_CBRP) >> 8);
+ write_ptr = (char) ((hcsr & H_CBWP) >> 16);
+
+ return (unsigned char) (write_ptr - read_ptr);
+}
+
+/**
+ * mei_me_hbuf_is_empty - checks if host buffer is empty.
+ *
+ * @dev: the device structure
+ *
+ * Return: true if empty, false - otherwise.
+ */
+static bool mei_me_hbuf_is_empty(struct mei_device *dev)
+{
+ return mei_hbuf_filled_slots(dev) == 0;
+}
+
+/**
+ * mei_me_hbuf_empty_slots - counts write empty slots.
+ *
+ * @dev: the device structure
+ *
+ * Return: -EOVERFLOW if overflow, otherwise empty slots count
+ */
+static int mei_me_hbuf_empty_slots(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ unsigned char filled_slots, empty_slots;
+
+ filled_slots = mei_hbuf_filled_slots(dev);
+ empty_slots = hw->hbuf_depth - filled_slots;
+
+ /* check for overflow */
+ if (filled_slots > hw->hbuf_depth)
+ return -EOVERFLOW;
+
+ return empty_slots;
+}
+
+/**
+ * mei_me_hbuf_depth - returns depth of the hw buffer.
+ *
+ * @dev: the device structure
+ *
+ * Return: size of hw buffer in slots
+ */
+static u32 mei_me_hbuf_depth(const struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+
+ return hw->hbuf_depth;
+}
+
+/**
+ * mei_me_hbuf_write - writes a message to host hw buffer.
+ *
+ * @dev: the device structure
+ * @hdr: header of message
+ * @hdr_len: header length in bytes: must be multiplication of a slot (4bytes)
+ * @data: payload
+ * @data_len: payload length in bytes
+ *
+ * Return: 0 if success, < 0 - otherwise.
+ */
+static int mei_me_hbuf_write(struct mei_device *dev,
+ const void *hdr, size_t hdr_len,
+ const void *data, size_t data_len)
+{
+ unsigned long rem;
+ unsigned long i;
+ const u32 *reg_buf;
+ u32 dw_cnt;
+ int empty_slots;
+
+ if (WARN_ON(!hdr || !data || hdr_len & 0x3))
+ return -EINVAL;
+
+ dev_dbg(dev->dev, MEI_HDR_FMT, MEI_HDR_PRM((struct mei_msg_hdr *)hdr));
+
+ empty_slots = mei_hbuf_empty_slots(dev);
+ dev_dbg(dev->dev, "empty slots = %hu.\n", empty_slots);
+
+ if (empty_slots < 0)
+ return -EOVERFLOW;
+
+ dw_cnt = mei_data2slots(hdr_len + data_len);
+ if (dw_cnt > (u32)empty_slots)
+ return -EMSGSIZE;
+
+ reg_buf = hdr;
+ for (i = 0; i < hdr_len / MEI_SLOT_SIZE; i++)
+ mei_me_hcbww_write(dev, reg_buf[i]);
+
+ reg_buf = data;
+ for (i = 0; i < data_len / MEI_SLOT_SIZE; i++)
+ mei_me_hcbww_write(dev, reg_buf[i]);
+
+ rem = data_len & 0x3;
+ if (rem > 0) {
+ u32 reg = 0;
+
+ memcpy(&reg, (const u8 *)data + data_len - rem, rem);
+ mei_me_hcbww_write(dev, reg);
+ }
+
+ mei_hcsr_set_hig(dev);
+ if (!mei_me_hw_is_ready(dev))
+ return -EIO;
+
+ return 0;
+}
+
+/**
+ * mei_me_count_full_read_slots - counts read full slots.
+ *
+ * @dev: the device structure
+ *
+ * Return: -EOVERFLOW if overflow, otherwise filled slots count
+ */
+static int mei_me_count_full_read_slots(struct mei_device *dev)
+{
+ u32 me_csr;
+ char read_ptr, write_ptr;
+ unsigned char buffer_depth, filled_slots;
+
+ me_csr = mei_me_mecsr_read(dev);
+ buffer_depth = (unsigned char)((me_csr & ME_CBD_HRA) >> 24);
+ read_ptr = (char) ((me_csr & ME_CBRP_HRA) >> 8);
+ write_ptr = (char) ((me_csr & ME_CBWP_HRA) >> 16);
+ filled_slots = (unsigned char) (write_ptr - read_ptr);
+
+ /* check for overflow */
+ if (filled_slots > buffer_depth)
+ return -EOVERFLOW;
+
+ dev_dbg(dev->dev, "filled_slots =%08x\n", filled_slots);
+ return (int)filled_slots;
+}
+
+/**
+ * mei_me_read_slots - reads a message from mei device.
+ *
+ * @dev: the device structure
+ * @buffer: message buffer will be written
+ * @buffer_length: message size will be read
+ *
+ * Return: always 0
+ */
+static int mei_me_read_slots(struct mei_device *dev, unsigned char *buffer,
+ unsigned long buffer_length)
+{
+ u32 *reg_buf = (u32 *)buffer;
+
+ for (; buffer_length >= MEI_SLOT_SIZE; buffer_length -= MEI_SLOT_SIZE)
+ *reg_buf++ = mei_me_mecbrw_read(dev);
+
+ if (buffer_length > 0) {
+ u32 reg = mei_me_mecbrw_read(dev);
+
+ memcpy(reg_buf, &reg, buffer_length);
+ }
+
+ mei_hcsr_set_hig(dev);
+ return 0;
+}
+
+/**
+ * mei_me_pg_set - write pg enter register
+ *
+ * @dev: the device structure
+ */
+static void mei_me_pg_set(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ u32 reg;
+
+ reg = mei_me_reg_read(hw, H_HPG_CSR);
+ trace_mei_reg_read(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg);
+
+ reg |= H_HPG_CSR_PGI;
+
+ trace_mei_reg_write(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg);
+ mei_me_reg_write(hw, H_HPG_CSR, reg);
+}
+
+/**
+ * mei_me_pg_unset - write pg exit register
+ *
+ * @dev: the device structure
+ */
+static void mei_me_pg_unset(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ u32 reg;
+
+ reg = mei_me_reg_read(hw, H_HPG_CSR);
+ trace_mei_reg_read(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg);
+
+ WARN(!(reg & H_HPG_CSR_PGI), "PGI is not set\n");
+
+ reg |= H_HPG_CSR_PGIHEXR;
+
+ trace_mei_reg_write(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg);
+ mei_me_reg_write(hw, H_HPG_CSR, reg);
+}
+
+/**
+ * mei_me_pg_legacy_enter_sync - perform legacy pg entry procedure
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+static int mei_me_pg_legacy_enter_sync(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ unsigned long timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
+ int ret;
+
+ dev->pg_event = MEI_PG_EVENT_WAIT;
+
+ ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_ENTRY_REQ_CMD);
+ if (ret)
+ return ret;
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_pg,
+ dev->pg_event == MEI_PG_EVENT_RECEIVED, timeout);
+ mutex_lock(&dev->device_lock);
+
+ if (dev->pg_event == MEI_PG_EVENT_RECEIVED) {
+ mei_me_pg_set(dev);
+ ret = 0;
+ } else {
+ ret = -ETIME;
+ }
+
+ dev->pg_event = MEI_PG_EVENT_IDLE;
+ hw->pg_state = MEI_PG_ON;
+
+ return ret;
+}
+
+/**
+ * mei_me_pg_legacy_exit_sync - perform legacy pg exit procedure
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+static int mei_me_pg_legacy_exit_sync(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ unsigned long timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
+ int ret;
+
+ if (dev->pg_event == MEI_PG_EVENT_RECEIVED)
+ goto reply;
+
+ dev->pg_event = MEI_PG_EVENT_WAIT;
+
+ mei_me_pg_unset(dev);
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_pg,
+ dev->pg_event == MEI_PG_EVENT_RECEIVED, timeout);
+ mutex_lock(&dev->device_lock);
+
+reply:
+ if (dev->pg_event != MEI_PG_EVENT_RECEIVED) {
+ ret = -ETIME;
+ goto out;
+ }
+
+ dev->pg_event = MEI_PG_EVENT_INTR_WAIT;
+ ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_EXIT_RES_CMD);
+ if (ret)
+ return ret;
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_pg,
+ dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, timeout);
+ mutex_lock(&dev->device_lock);
+
+ if (dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED)
+ ret = 0;
+ else
+ ret = -ETIME;
+
+out:
+ dev->pg_event = MEI_PG_EVENT_IDLE;
+ hw->pg_state = MEI_PG_OFF;
+
+ return ret;
+}
+
+/**
+ * mei_me_pg_in_transition - is device now in pg transition
+ *
+ * @dev: the device structure
+ *
+ * Return: true if in pg transition, false otherwise
+ */
+static bool mei_me_pg_in_transition(struct mei_device *dev)
+{
+ return dev->pg_event >= MEI_PG_EVENT_WAIT &&
+ dev->pg_event <= MEI_PG_EVENT_INTR_WAIT;
+}
+
+/**
+ * mei_me_pg_is_enabled - detect if PG is supported by HW
+ *
+ * @dev: the device structure
+ *
+ * Return: true is pg supported, false otherwise
+ */
+static bool mei_me_pg_is_enabled(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ u32 reg = mei_me_mecsr_read(dev);
+
+ if (hw->d0i3_supported)
+ return true;
+
+ if ((reg & ME_PGIC_HRA) == 0)
+ goto notsupported;
+
+ if (!dev->hbm_f_pg_supported)
+ goto notsupported;
+
+ return true;
+
+notsupported:
+ dev_dbg(dev->dev, "pg: not supported: d0i3 = %d HGP = %d hbm version %d.%d ?= %d.%d\n",
+ hw->d0i3_supported,
+ !!(reg & ME_PGIC_HRA),
+ dev->version.major_version,
+ dev->version.minor_version,
+ HBM_MAJOR_VERSION_PGI,
+ HBM_MINOR_VERSION_PGI);
+
+ return false;
+}
+
+/**
+ * mei_me_d0i3_set - write d0i3 register bit on mei device.
+ *
+ * @dev: the device structure
+ * @intr: ask for interrupt
+ *
+ * Return: D0I3C register value
+ */
+static u32 mei_me_d0i3_set(struct mei_device *dev, bool intr)
+{
+ u32 reg = mei_me_d0i3c_read(dev);
+
+ reg |= H_D0I3C_I3;
+ if (intr)
+ reg |= H_D0I3C_IR;
+ else
+ reg &= ~H_D0I3C_IR;
+ mei_me_d0i3c_write(dev, reg);
+ /* read it to ensure HW consistency */
+ reg = mei_me_d0i3c_read(dev);
+ return reg;
+}
+
+/**
+ * mei_me_d0i3_unset - clean d0i3 register bit on mei device.
+ *
+ * @dev: the device structure
+ *
+ * Return: D0I3C register value
+ */
+static u32 mei_me_d0i3_unset(struct mei_device *dev)
+{
+ u32 reg = mei_me_d0i3c_read(dev);
+
+ reg &= ~H_D0I3C_I3;
+ reg |= H_D0I3C_IR;
+ mei_me_d0i3c_write(dev, reg);
+ /* read it to ensure HW consistency */
+ reg = mei_me_d0i3c_read(dev);
+ return reg;
+}
+
+/**
+ * mei_me_d0i3_enter_sync - perform d0i3 entry procedure
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+static int mei_me_d0i3_enter_sync(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ unsigned long d0i3_timeout = mei_secs_to_jiffies(MEI_D0I3_TIMEOUT);
+ unsigned long pgi_timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
+ int ret;
+ u32 reg;
+
+ reg = mei_me_d0i3c_read(dev);
+ if (reg & H_D0I3C_I3) {
+ /* we are in d0i3, nothing to do */
+ dev_dbg(dev->dev, "d0i3 set not needed\n");
+ ret = 0;
+ goto on;
+ }
+
+ /* PGI entry procedure */
+ dev->pg_event = MEI_PG_EVENT_WAIT;
+
+ ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_ENTRY_REQ_CMD);
+ if (ret)
+ /* FIXME: should we reset here? */
+ goto out;
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_pg,
+ dev->pg_event == MEI_PG_EVENT_RECEIVED, pgi_timeout);
+ mutex_lock(&dev->device_lock);
+
+ if (dev->pg_event != MEI_PG_EVENT_RECEIVED) {
+ ret = -ETIME;
+ goto out;
+ }
+ /* end PGI entry procedure */
+
+ dev->pg_event = MEI_PG_EVENT_INTR_WAIT;
+
+ reg = mei_me_d0i3_set(dev, true);
+ if (!(reg & H_D0I3C_CIP)) {
+ dev_dbg(dev->dev, "d0i3 enter wait not needed\n");
+ ret = 0;
+ goto on;
+ }
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_pg,
+ dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, d0i3_timeout);
+ mutex_lock(&dev->device_lock);
+
+ if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) {
+ reg = mei_me_d0i3c_read(dev);
+ if (!(reg & H_D0I3C_I3)) {
+ ret = -ETIME;
+ goto out;
+ }
+ }
+
+ ret = 0;
+on:
+ hw->pg_state = MEI_PG_ON;
+out:
+ dev->pg_event = MEI_PG_EVENT_IDLE;
+ dev_dbg(dev->dev, "d0i3 enter ret = %d\n", ret);
+ return ret;
+}
+
+/**
+ * mei_me_d0i3_enter - perform d0i3 entry procedure
+ * no hbm PG handshake
+ * no waiting for confirmation; runs with interrupts
+ * disabled
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+static int mei_me_d0i3_enter(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ u32 reg;
+
+ reg = mei_me_d0i3c_read(dev);
+ if (reg & H_D0I3C_I3) {
+ /* we are in d0i3, nothing to do */
+ dev_dbg(dev->dev, "already d0i3 : set not needed\n");
+ goto on;
+ }
+
+ mei_me_d0i3_set(dev, false);
+on:
+ hw->pg_state = MEI_PG_ON;
+ dev->pg_event = MEI_PG_EVENT_IDLE;
+ dev_dbg(dev->dev, "d0i3 enter\n");
+ return 0;
+}
+
+/**
+ * mei_me_d0i3_exit_sync - perform d0i3 exit procedure
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+static int mei_me_d0i3_exit_sync(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ unsigned long timeout = mei_secs_to_jiffies(MEI_D0I3_TIMEOUT);
+ int ret;
+ u32 reg;
+
+ dev->pg_event = MEI_PG_EVENT_INTR_WAIT;
+
+ reg = mei_me_d0i3c_read(dev);
+ if (!(reg & H_D0I3C_I3)) {
+ /* we are not in d0i3, nothing to do */
+ dev_dbg(dev->dev, "d0i3 exit not needed\n");
+ ret = 0;
+ goto off;
+ }
+
+ reg = mei_me_d0i3_unset(dev);
+ if (!(reg & H_D0I3C_CIP)) {
+ dev_dbg(dev->dev, "d0i3 exit wait not needed\n");
+ ret = 0;
+ goto off;
+ }
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_pg,
+ dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, timeout);
+ mutex_lock(&dev->device_lock);
+
+ if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) {
+ reg = mei_me_d0i3c_read(dev);
+ if (reg & H_D0I3C_I3) {
+ ret = -ETIME;
+ goto out;
+ }
+ }
+
+ ret = 0;
+off:
+ hw->pg_state = MEI_PG_OFF;
+out:
+ dev->pg_event = MEI_PG_EVENT_IDLE;
+
+ dev_dbg(dev->dev, "d0i3 exit ret = %d\n", ret);
+ return ret;
+}
+
+/**
+ * mei_me_pg_legacy_intr - perform legacy pg processing
+ * in interrupt thread handler
+ *
+ * @dev: the device structure
+ */
+static void mei_me_pg_legacy_intr(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+
+ if (dev->pg_event != MEI_PG_EVENT_INTR_WAIT)
+ return;
+
+ dev->pg_event = MEI_PG_EVENT_INTR_RECEIVED;
+ hw->pg_state = MEI_PG_OFF;
+ if (waitqueue_active(&dev->wait_pg))
+ wake_up(&dev->wait_pg);
+}
+
+/**
+ * mei_me_d0i3_intr - perform d0i3 processing in interrupt thread handler
+ *
+ * @dev: the device structure
+ * @intr_source: interrupt source
+ */
+static void mei_me_d0i3_intr(struct mei_device *dev, u32 intr_source)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+
+ if (dev->pg_event == MEI_PG_EVENT_INTR_WAIT &&
+ (intr_source & H_D0I3C_IS)) {
+ dev->pg_event = MEI_PG_EVENT_INTR_RECEIVED;
+ if (hw->pg_state == MEI_PG_ON) {
+ hw->pg_state = MEI_PG_OFF;
+ if (dev->hbm_state != MEI_HBM_IDLE) {
+ /*
+ * force H_RDY because it could be
+ * wiped off during PG
+ */
+ dev_dbg(dev->dev, "d0i3 set host ready\n");
+ mei_me_host_set_ready(dev);
+ }
+ } else {
+ hw->pg_state = MEI_PG_ON;
+ }
+
+ wake_up(&dev->wait_pg);
+ }
+
+ if (hw->pg_state == MEI_PG_ON && (intr_source & H_IS)) {
+ /*
+ * HW sent some data and we are in D0i3, so
+ * we got here because of HW initiated exit from D0i3.
+ * Start runtime pm resume sequence to exit low power state.
+ */
+ dev_dbg(dev->dev, "d0i3 want resume\n");
+ mei_hbm_pg_resume(dev);
+ }
+}
+
+/**
+ * mei_me_pg_intr - perform pg processing in interrupt thread handler
+ *
+ * @dev: the device structure
+ * @intr_source: interrupt source
+ */
+static void mei_me_pg_intr(struct mei_device *dev, u32 intr_source)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+
+ if (hw->d0i3_supported)
+ mei_me_d0i3_intr(dev, intr_source);
+ else
+ mei_me_pg_legacy_intr(dev);
+}
+
+/**
+ * mei_me_pg_enter_sync - perform runtime pm entry procedure
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+int mei_me_pg_enter_sync(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+
+ if (hw->d0i3_supported)
+ return mei_me_d0i3_enter_sync(dev);
+ else
+ return mei_me_pg_legacy_enter_sync(dev);
+}
+
+/**
+ * mei_me_pg_exit_sync - perform runtime pm exit procedure
+ *
+ * @dev: the device structure
+ *
+ * Return: 0 on success an error code otherwise
+ */
+int mei_me_pg_exit_sync(struct mei_device *dev)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+
+ if (hw->d0i3_supported)
+ return mei_me_d0i3_exit_sync(dev);
+ else
+ return mei_me_pg_legacy_exit_sync(dev);
+}
+
+/**
+ * mei_me_hw_reset - resets fw via mei csr register.
+ *
+ * @dev: the device structure
+ * @intr_enable: if interrupt should be enabled after reset.
+ *
+ * Return: 0 on success an error code otherwise
+ */
+static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable)
+{
+ struct mei_me_hw *hw = to_me_hw(dev);
+ int ret;
+ u32 hcsr;
+
+ if (intr_enable) {
+ mei_me_intr_enable(dev);
+ if (hw->d0i3_supported) {
+ ret = mei_me_d0i3_exit_sync(dev);
+ if (ret)
+ return ret;
+ }
+ }
+
+ pm_runtime_set_active(dev->dev);
+
+ hcsr = mei_hcsr_read(dev);
+ /* H_RST may be found lit before reset is started,
+ * for example if preceding reset flow hasn't completed.
+ * In that case asserting H_RST will be ignored, therefore
+ * we need to clean H_RST bit to start a successful reset sequence.
+ */
+ if ((hcsr & H_RST) == H_RST) {
+ dev_warn(dev->dev, "H_RST is set = 0x%08X", hcsr);
+ hcsr &= ~H_RST;
+ mei_hcsr_set(dev, hcsr);
+ hcsr = mei_hcsr_read(dev);
+ }
+
+ hcsr |= H_RST | H_IG | H_CSR_IS_MASK;
+
+ if (!intr_enable)
+ hcsr &= ~H_CSR_IE_MASK;
+
+ dev->recvd_hw_ready = false;
+ mei_hcsr_write(dev, hcsr);
+
+ /*
+ * Host reads the H_CSR once to ensure that the
+ * posted write to H_CSR completes.
+ */
+ hcsr = mei_hcsr_read(dev);
+
+ if ((hcsr & H_RST) == 0)
+ dev_warn(dev->dev, "H_RST is not set = 0x%08X", hcsr);
+
+ if ((hcsr & H_RDY) == H_RDY)
+ dev_warn(dev->dev, "H_RDY is not cleared 0x%08X", hcsr);
+
+ if (!intr_enable) {
+ mei_me_hw_reset_release(dev);
+ if (hw->d0i3_supported) {
+ ret = mei_me_d0i3_enter(dev);
+ if (ret)
+ return ret;
+ }
+ }
+ return 0;
+}
+
+/**
+ * mei_me_irq_quick_handler - The ISR of the MEI device
+ *
+ * @irq: The irq number
+ * @dev_id: pointer to the device structure
+ *
+ * Return: irqreturn_t
+ */
+irqreturn_t mei_me_irq_quick_handler(int irq, void *dev_id)
+{
+ struct mei_device *dev = (struct mei_device *)dev_id;
+ u32 hcsr;
+
+ hcsr = mei_hcsr_read(dev);
+ if (!me_intr_src(hcsr))
+ return IRQ_NONE;
+
+ dev_dbg(dev->dev, "interrupt source 0x%08X\n", me_intr_src(hcsr));
+
+ /* disable interrupts on device */
+ me_intr_disable(dev, hcsr);
+ return IRQ_WAKE_THREAD;
+}
+
+/**
+ * mei_me_irq_thread_handler - function called after ISR to handle the interrupt
+ * processing.
+ *
+ * @irq: The irq number
+ * @dev_id: pointer to the device structure
+ *
+ * Return: irqreturn_t
+ *
+ */
+irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id)
+{
+ struct mei_device *dev = (struct mei_device *) dev_id;
+ struct list_head cmpl_list;
+ s32 slots;
+ u32 hcsr;
+ int rets = 0;
+
+ dev_dbg(dev->dev, "function called after ISR to handle the interrupt processing.\n");
+ /* initialize our complete list */
+ mutex_lock(&dev->device_lock);
+
+ hcsr = mei_hcsr_read(dev);
+ me_intr_clear(dev, hcsr);
+
+ INIT_LIST_HEAD(&cmpl_list);
+
+ /* check if ME wants a reset */
+ if (!mei_hw_is_ready(dev) && dev->dev_state != MEI_DEV_RESETTING) {
+ dev_warn(dev->dev, "FW not ready: resetting.\n");
+ schedule_work(&dev->reset_work);
+ goto end;
+ }
+
+ if (mei_me_hw_is_resetting(dev))
+ mei_hcsr_set_hig(dev);
+
+ mei_me_pg_intr(dev, me_intr_src(hcsr));
+
+ /* check if we need to start the dev */
+ if (!mei_host_is_ready(dev)) {
+ if (mei_hw_is_ready(dev)) {
+ dev_dbg(dev->dev, "we need to start the dev.\n");
+ dev->recvd_hw_ready = true;
+ wake_up(&dev->wait_hw_ready);
+ } else {
+ dev_dbg(dev->dev, "Spurious Interrupt\n");
+ }
+ goto end;
+ }
+ /* check slots available for reading */
+ slots = mei_count_full_read_slots(dev);
+ while (slots > 0) {
+ dev_dbg(dev->dev, "slots to read = %08x\n", slots);
+ rets = mei_irq_read_handler(dev, &cmpl_list, &slots);
+ /* There is a race between ME write and interrupt delivery:
+ * Not all data is always available immediately after the
+ * interrupt, so try to read again on the next interrupt.
+ */
+ if (rets == -ENODATA)
+ break;
+
+ if (rets &&
+ (dev->dev_state != MEI_DEV_RESETTING &&
+ dev->dev_state != MEI_DEV_POWER_DOWN)) {
+ dev_err(dev->dev, "mei_irq_read_handler ret = %d.\n",
+ rets);
+ schedule_work(&dev->reset_work);
+ goto end;
+ }
+ }
+
+ dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
+
+ /*
+ * During PG handshake only allowed write is the replay to the
+ * PG exit message, so block calling write function
+ * if the pg event is in PG handshake
+ */
+ if (dev->pg_event != MEI_PG_EVENT_WAIT &&
+ dev->pg_event != MEI_PG_EVENT_RECEIVED) {
+ rets = mei_irq_write_handler(dev, &cmpl_list);
+ dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
+ }
+
+ mei_irq_compl_handler(dev, &cmpl_list);
+
+end:
+ dev_dbg(dev->dev, "interrupt thread end ret = %d\n", rets);
+ mei_me_intr_enable(dev);
+ mutex_unlock(&dev->device_lock);
+ return IRQ_HANDLED;
+}
+
+static const struct mei_hw_ops mei_me_hw_ops = {
+
+ .trc_status = mei_me_trc_status,
+ .fw_status = mei_me_fw_status,
+ .pg_state = mei_me_pg_state,
+
+ .host_is_ready = mei_me_host_is_ready,
+
+ .hw_is_ready = mei_me_hw_is_ready,
+ .hw_reset = mei_me_hw_reset,
+ .hw_config = mei_me_hw_config,
+ .hw_start = mei_me_hw_start,
+
+ .pg_in_transition = mei_me_pg_in_transition,
+ .pg_is_enabled = mei_me_pg_is_enabled,
+
+ .intr_clear = mei_me_intr_clear,
+ .intr_enable = mei_me_intr_enable,
+ .intr_disable = mei_me_intr_disable,
+ .synchronize_irq = mei_me_synchronize_irq,
+
+ .hbuf_free_slots = mei_me_hbuf_empty_slots,
+ .hbuf_is_ready = mei_me_hbuf_is_empty,
+ .hbuf_depth = mei_me_hbuf_depth,
+
+ .write = mei_me_hbuf_write,
+
+ .rdbuf_full_slots = mei_me_count_full_read_slots,
+ .read_hdr = mei_me_mecbrw_read,
+ .read = mei_me_read_slots
+};
+
+/**
+ * mei_me_fw_type_nm() - check for nm sku
+ *
+ * Read ME FW Status register to check for the Node Manager (NM) Firmware.
+ * The NM FW is only signaled in PCI function 0.
+ * __Note__: Deprecated by PCH8 and newer.
+ *
+ * @pdev: pci device
+ *
+ * Return: true in case of NM firmware
+ */
+static bool mei_me_fw_type_nm(const struct pci_dev *pdev)
+{
+ u32 reg;
+ unsigned int devfn;
+
+ devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
+ pci_bus_read_config_dword(pdev->bus, devfn, PCI_CFG_HFS_2, &reg);
+ trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_2", PCI_CFG_HFS_2, reg);
+ /* make sure that bit 9 (NM) is up and bit 10 (DM) is down */
+ return (reg & 0x600) == 0x200;
+}
+
+#define MEI_CFG_FW_NM \
+ .quirk_probe = mei_me_fw_type_nm
+
+/**
+ * mei_me_fw_sku_sps_4() - check for sps 4.0 sku
+ *
+ * Read ME FW Status register to check for SPS Firmware.
+ * The SPS FW is only signaled in the PCI function 0.
+ * __Note__: Deprecated by SPS 5.0 and newer.
+ *
+ * @pdev: pci device
+ *
+ * Return: true in case of SPS firmware
+ */
+static bool mei_me_fw_type_sps_4(const struct pci_dev *pdev)
+{
+ u32 reg;
+ unsigned int devfn;
+
+ devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
+ pci_bus_read_config_dword(pdev->bus, devfn, PCI_CFG_HFS_1, &reg);
+ trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_1", PCI_CFG_HFS_1, reg);
+ return (reg & PCI_CFG_HFS_1_OPMODE_MSK) == PCI_CFG_HFS_1_OPMODE_SPS;
+}
+
+#define MEI_CFG_FW_SPS_4 \
+ .quirk_probe = mei_me_fw_type_sps_4
+
+/**
+ * mei_me_fw_sku_sps() - check for sps sku
+ *
+ * Read ME FW Status register to check for SPS Firmware.
+ * The SPS FW is only signaled in pci function 0
+ *
+ * @pdev: pci device
+ *
+ * Return: true in case of SPS firmware
+ */
+static bool mei_me_fw_type_sps(const struct pci_dev *pdev)
+{
+ u32 reg;
+ u32 fw_type;
+ unsigned int devfn;
+
+ devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
+ pci_bus_read_config_dword(pdev->bus, devfn, PCI_CFG_HFS_3, &reg);
+ trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_3", PCI_CFG_HFS_3, reg);
+ fw_type = (reg & PCI_CFG_HFS_3_FW_SKU_MSK);
+
+ dev_dbg(&pdev->dev, "fw type is %d\n", fw_type);
+
+ return fw_type == PCI_CFG_HFS_3_FW_SKU_SPS;
+}
+
+#define MEI_CFG_KIND_ITOUCH \
+ .kind = "itouch"
+
+#define MEI_CFG_FW_SPS \
+ .quirk_probe = mei_me_fw_type_sps
+
+#define MEI_CFG_FW_VER_SUPP \
+ .fw_ver_supported = 1
+
+#define MEI_CFG_ICH_HFS \
+ .fw_status.count = 0
+
+#define MEI_CFG_ICH10_HFS \
+ .fw_status.count = 1, \
+ .fw_status.status[0] = PCI_CFG_HFS_1
+
+#define MEI_CFG_PCH_HFS \
+ .fw_status.count = 2, \
+ .fw_status.status[0] = PCI_CFG_HFS_1, \
+ .fw_status.status[1] = PCI_CFG_HFS_2
+
+#define MEI_CFG_PCH8_HFS \
+ .fw_status.count = 6, \
+ .fw_status.status[0] = PCI_CFG_HFS_1, \
+ .fw_status.status[1] = PCI_CFG_HFS_2, \
+ .fw_status.status[2] = PCI_CFG_HFS_3, \
+ .fw_status.status[3] = PCI_CFG_HFS_4, \
+ .fw_status.status[4] = PCI_CFG_HFS_5, \
+ .fw_status.status[5] = PCI_CFG_HFS_6
+
+#define MEI_CFG_DMA_128 \
+ .dma_size[DMA_DSCR_HOST] = SZ_128K, \
+ .dma_size[DMA_DSCR_DEVICE] = SZ_128K, \
+ .dma_size[DMA_DSCR_CTRL] = PAGE_SIZE
+
+#define MEI_CFG_TRC \
+ .hw_trc_supported = 1
+
+/* ICH Legacy devices */
+static const struct mei_cfg mei_me_ich_cfg = {
+ MEI_CFG_ICH_HFS,
+};
+
+/* ICH devices */
+static const struct mei_cfg mei_me_ich10_cfg = {
+ MEI_CFG_ICH10_HFS,
+};
+
+/* PCH6 devices */
+static const struct mei_cfg mei_me_pch6_cfg = {
+ MEI_CFG_PCH_HFS,
+};
+
+/* PCH7 devices */
+static const struct mei_cfg mei_me_pch7_cfg = {
+ MEI_CFG_PCH_HFS,
+ MEI_CFG_FW_VER_SUPP,
+};
+
+/* PCH Cougar Point and Patsburg with quirk for Node Manager exclusion */
+static const struct mei_cfg mei_me_pch_cpt_pbg_cfg = {
+ MEI_CFG_PCH_HFS,
+ MEI_CFG_FW_VER_SUPP,
+ MEI_CFG_FW_NM,
+};
+
+/* PCH8 Lynx Point and newer devices */
+static const struct mei_cfg mei_me_pch8_cfg = {
+ MEI_CFG_PCH8_HFS,
+ MEI_CFG_FW_VER_SUPP,
+};
+
+/* PCH8 Lynx Point and newer devices - iTouch */
+static const struct mei_cfg mei_me_pch8_itouch_cfg = {
+ MEI_CFG_KIND_ITOUCH,
+ MEI_CFG_PCH8_HFS,
+ MEI_CFG_FW_VER_SUPP,
+};
+
+/* PCH8 Lynx Point with quirk for SPS Firmware exclusion */
+static const struct mei_cfg mei_me_pch8_sps_4_cfg = {
+ MEI_CFG_PCH8_HFS,
+ MEI_CFG_FW_VER_SUPP,
+ MEI_CFG_FW_SPS_4,
+};
+
+/* LBG with quirk for SPS (4.0) Firmware exclusion */
+static const struct mei_cfg mei_me_pch12_sps_4_cfg = {
+ MEI_CFG_PCH8_HFS,
+ MEI_CFG_FW_VER_SUPP,
+ MEI_CFG_FW_SPS_4,
+};
+
+/* Cannon Lake and newer devices */
+static const struct mei_cfg mei_me_pch12_cfg = {
+ MEI_CFG_PCH8_HFS,
+ MEI_CFG_FW_VER_SUPP,
+ MEI_CFG_DMA_128,
+};
+
+/* Cannon Lake with quirk for SPS 5.0 and newer Firmware exclusion */
+static const struct mei_cfg mei_me_pch12_sps_cfg = {
+ MEI_CFG_PCH8_HFS,
+ MEI_CFG_FW_VER_SUPP,
+ MEI_CFG_DMA_128,
+ MEI_CFG_FW_SPS,
+};
+
+/* Cannon Lake itouch with quirk for SPS 5.0 and newer Firmware exclusion
+ * w/o DMA support.
+ */
+static const struct mei_cfg mei_me_pch12_itouch_sps_cfg = {
+ MEI_CFG_KIND_ITOUCH,
+ MEI_CFG_PCH8_HFS,
+ MEI_CFG_FW_VER_SUPP,
+ MEI_CFG_FW_SPS,
+};
+
+/* Tiger Lake and newer devices */
+static const struct mei_cfg mei_me_pch15_cfg = {
+ MEI_CFG_PCH8_HFS,
+ MEI_CFG_FW_VER_SUPP,
+ MEI_CFG_DMA_128,
+ MEI_CFG_TRC,
+};
+
+/* Tiger Lake with quirk for SPS 5.0 and newer Firmware exclusion */
+static const struct mei_cfg mei_me_pch15_sps_cfg = {
+ MEI_CFG_PCH8_HFS,
+ MEI_CFG_FW_VER_SUPP,
+ MEI_CFG_DMA_128,
+ MEI_CFG_TRC,
+ MEI_CFG_FW_SPS,
+};
+
+/*
+ * mei_cfg_list - A list of platform platform specific configurations.
+ * Note: has to be synchronized with enum mei_cfg_idx.
+ */
+static const struct mei_cfg *const mei_cfg_list[] = {
+ [MEI_ME_UNDEF_CFG] = NULL,
+ [MEI_ME_ICH_CFG] = &mei_me_ich_cfg,
+ [MEI_ME_ICH10_CFG] = &mei_me_ich10_cfg,
+ [MEI_ME_PCH6_CFG] = &mei_me_pch6_cfg,
+ [MEI_ME_PCH7_CFG] = &mei_me_pch7_cfg,
+ [MEI_ME_PCH_CPT_PBG_CFG] = &mei_me_pch_cpt_pbg_cfg,
+ [MEI_ME_PCH8_CFG] = &mei_me_pch8_cfg,
+ [MEI_ME_PCH8_ITOUCH_CFG] = &mei_me_pch8_itouch_cfg,
+ [MEI_ME_PCH8_SPS_4_CFG] = &mei_me_pch8_sps_4_cfg,
+ [MEI_ME_PCH12_CFG] = &mei_me_pch12_cfg,
+ [MEI_ME_PCH12_SPS_4_CFG] = &mei_me_pch12_sps_4_cfg,
+ [MEI_ME_PCH12_SPS_CFG] = &mei_me_pch12_sps_cfg,
+ [MEI_ME_PCH12_SPS_ITOUCH_CFG] = &mei_me_pch12_itouch_sps_cfg,
+ [MEI_ME_PCH15_CFG] = &mei_me_pch15_cfg,
+ [MEI_ME_PCH15_SPS_CFG] = &mei_me_pch15_sps_cfg,
+};
+
+const struct mei_cfg *mei_me_get_cfg(kernel_ulong_t idx)
+{
+ BUILD_BUG_ON(ARRAY_SIZE(mei_cfg_list) != MEI_ME_NUM_CFG);
+
+ if (idx >= MEI_ME_NUM_CFG)
+ return NULL;
+
+ return mei_cfg_list[idx];
+};
+
+/**
+ * mei_me_dev_init - allocates and initializes the mei device structure
+ *
+ * @parent: device associated with physical device (pci/platform)
+ * @cfg: per device generation config
+ *
+ * Return: The mei_device pointer on success, NULL on failure.
+ */
+struct mei_device *mei_me_dev_init(struct device *parent,
+ const struct mei_cfg *cfg)
+{
+ struct mei_device *dev;
+ struct mei_me_hw *hw;
+ int i;
+
+ dev = devm_kzalloc(parent, sizeof(*dev) + sizeof(*hw), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ hw = to_me_hw(dev);
+
+ for (i = 0; i < DMA_DSCR_NUM; i++)
+ dev->dr_dscr[i].size = cfg->dma_size[i];
+
+ mei_device_init(dev, parent, &mei_me_hw_ops);
+ hw->cfg = cfg;
+
+ dev->fw_f_fw_ver_supported = cfg->fw_ver_supported;
+
+ dev->kind = cfg->kind;
+
+ return dev;
+}
+