diff options
Diffstat (limited to 'drivers/misc/ti-st/st_kim.c')
| -rw-r--r-- | drivers/misc/ti-st/st_kim.c | 846 |
1 files changed, 846 insertions, 0 deletions
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c new file mode 100644 index 000000000..f2f6cab97 --- /dev/null +++ b/drivers/misc/ti-st/st_kim.c @@ -0,0 +1,846 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Shared Transport Line discipline driver Core + * Init Manager module responsible for GPIO control + * and firmware download + * Copyright (C) 2009-2010 Texas Instruments + * Author: Pavan Savoy <pavan_savoy@ti.com> + */ + +#define pr_fmt(fmt) "(stk) :" fmt +#include <linux/platform_device.h> +#include <linux/jiffies.h> +#include <linux/firmware.h> +#include <linux/delay.h> +#include <linux/wait.h> +#include <linux/gpio.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/sched.h> +#include <linux/sysfs.h> +#include <linux/tty.h> + +#include <linux/skbuff.h> +#include <linux/ti_wilink_st.h> +#include <linux/module.h> + +#define MAX_ST_DEVICES 3 /* Imagine 1 on each UART for now */ +static struct platform_device *st_kim_devices[MAX_ST_DEVICES]; + +/**********************************************************************/ +/* internal functions */ + +/* + * st_get_plat_device - + * function which returns the reference to the platform device + * requested by id. As of now only 1 such device exists (id=0) + * the context requesting for reference can get the id to be + * requested by a. The protocol driver which is registering or + * b. the tty device which is opened. + */ +static struct platform_device *st_get_plat_device(int id) +{ + return st_kim_devices[id]; +} + +/* + * validate_firmware_response - + * function to return whether the firmware response was proper + * in case of error don't complete so that waiting for proper + * response times out + */ +static void validate_firmware_response(struct kim_data_s *kim_gdata) +{ + struct sk_buff *skb = kim_gdata->rx_skb; + if (!skb) + return; + + /* + * these magic numbers are the position in the response buffer which + * allows us to distinguish whether the response is for the read + * version info. command + */ + if (skb->data[2] == 0x01 && skb->data[3] == 0x01 && + skb->data[4] == 0x10 && skb->data[5] == 0x00) { + /* fw version response */ + memcpy(kim_gdata->resp_buffer, + kim_gdata->rx_skb->data, + kim_gdata->rx_skb->len); + kim_gdata->rx_state = ST_W4_PACKET_TYPE; + kim_gdata->rx_skb = NULL; + kim_gdata->rx_count = 0; + } else if (unlikely(skb->data[5] != 0)) { + pr_err("no proper response during fw download"); + pr_err("data6 %x", skb->data[5]); + kfree_skb(skb); + return; /* keep waiting for the proper response */ + } + /* becos of all the script being downloaded */ + complete_all(&kim_gdata->kim_rcvd); + kfree_skb(skb); +} + +/* + * check for data len received inside kim_int_recv + * most often hit the last case to update state to waiting for data + */ +static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len) +{ + register int room = skb_tailroom(kim_gdata->rx_skb); + + pr_debug("len %d room %d", len, room); + + if (!len) { + validate_firmware_response(kim_gdata); + } else if (len > room) { + /* + * Received packet's payload length is larger. + * We can't accommodate it in created skb. + */ + pr_err("Data length is too large len %d room %d", len, + room); + kfree_skb(kim_gdata->rx_skb); + } else { + /* + * Packet header has non-zero payload length and + * we have enough space in created skb. Lets read + * payload data */ + kim_gdata->rx_state = ST_W4_DATA; + kim_gdata->rx_count = len; + return len; + } + + /* + * Change ST LL state to continue to process next + * packet + */ + kim_gdata->rx_state = ST_W4_PACKET_TYPE; + kim_gdata->rx_skb = NULL; + kim_gdata->rx_count = 0; + + return 0; +} + +/* + * kim_int_recv - receive function called during firmware download + * firmware download responses on different UART drivers + * have been observed to come in bursts of different + * tty_receive and hence the logic + */ +static void kim_int_recv(struct kim_data_s *kim_gdata, + const unsigned char *data, long count) +{ + const unsigned char *ptr; + int len = 0; + unsigned char *plen; + + pr_debug("%s", __func__); + /* Decode received bytes here */ + ptr = data; + if (unlikely(ptr == NULL)) { + pr_err(" received null from TTY "); + return; + } + + while (count) { + if (kim_gdata->rx_count) { + len = min_t(unsigned int, kim_gdata->rx_count, count); + skb_put_data(kim_gdata->rx_skb, ptr, len); + kim_gdata->rx_count -= len; + count -= len; + ptr += len; + + if (kim_gdata->rx_count) + continue; + + /* Check ST RX state machine , where are we? */ + switch (kim_gdata->rx_state) { + /* Waiting for complete packet ? */ + case ST_W4_DATA: + pr_debug("Complete pkt received"); + validate_firmware_response(kim_gdata); + kim_gdata->rx_state = ST_W4_PACKET_TYPE; + kim_gdata->rx_skb = NULL; + continue; + /* Waiting for Bluetooth event header ? */ + case ST_W4_HEADER: + plen = + (unsigned char *)&kim_gdata->rx_skb->data[1]; + pr_debug("event hdr: plen 0x%02x\n", *plen); + kim_check_data_len(kim_gdata, *plen); + continue; + } /* end of switch */ + } /* end of if rx_state */ + switch (*ptr) { + /* Bluetooth event packet? */ + case 0x04: + kim_gdata->rx_state = ST_W4_HEADER; + kim_gdata->rx_count = 2; + break; + default: + pr_info("unknown packet"); + ptr++; + count--; + continue; + } + ptr++; + count--; + kim_gdata->rx_skb = + alloc_skb(1024+8, GFP_ATOMIC); + if (!kim_gdata->rx_skb) { + pr_err("can't allocate mem for new packet"); + kim_gdata->rx_state = ST_W4_PACKET_TYPE; + kim_gdata->rx_count = 0; + return; + } + skb_reserve(kim_gdata->rx_skb, 8); + kim_gdata->rx_skb->cb[0] = 4; + kim_gdata->rx_skb->cb[1] = 0; + + } + return; +} + +static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name) +{ + unsigned short version = 0, chip = 0, min_ver = 0, maj_ver = 0; + static const char read_ver_cmd[] = { 0x01, 0x01, 0x10, 0x00 }; + long timeout; + + pr_debug("%s", __func__); + + reinit_completion(&kim_gdata->kim_rcvd); + if (4 != st_int_write(kim_gdata->core_data, read_ver_cmd, 4)) { + pr_err("kim: couldn't write 4 bytes"); + return -EIO; + } + + timeout = wait_for_completion_interruptible_timeout( + &kim_gdata->kim_rcvd, msecs_to_jiffies(CMD_RESP_TIME)); + if (timeout <= 0) { + pr_err(" waiting for ver info- timed out or received signal"); + return timeout ? -ERESTARTSYS : -ETIMEDOUT; + } + reinit_completion(&kim_gdata->kim_rcvd); + /* + * the positions 12 & 13 in the response buffer provide with the + * chip, major & minor numbers + */ + + version = + MAKEWORD(kim_gdata->resp_buffer[12], + kim_gdata->resp_buffer[13]); + chip = (version & 0x7C00) >> 10; + min_ver = (version & 0x007F); + maj_ver = (version & 0x0380) >> 7; + + if (version & 0x8000) + maj_ver |= 0x0008; + + sprintf(bts_scr_name, "ti-connectivity/TIInit_%d.%d.%d.bts", + chip, maj_ver, min_ver); + + /* to be accessed later via sysfs entry */ + kim_gdata->version.full = version; + kim_gdata->version.chip = chip; + kim_gdata->version.maj_ver = maj_ver; + kim_gdata->version.min_ver = min_ver; + + pr_info("%s", bts_scr_name); + return 0; +} + +static void skip_change_remote_baud(unsigned char **ptr, long *len) +{ + unsigned char *nxt_action, *cur_action; + cur_action = *ptr; + + nxt_action = cur_action + sizeof(struct bts_action) + + ((struct bts_action *) cur_action)->size; + + if (((struct bts_action *) nxt_action)->type != ACTION_WAIT_EVENT) { + pr_err("invalid action after change remote baud command"); + } else { + *ptr = *ptr + sizeof(struct bts_action) + + ((struct bts_action *)cur_action)->size; + *len = *len - (sizeof(struct bts_action) + + ((struct bts_action *)cur_action)->size); + /* warn user on not commenting these in firmware */ + pr_warn("skipping the wait event of change remote baud"); + } +} + +/* + * download_firmware - + * internal function which parses through the .bts firmware + * script file intreprets SEND, DELAY actions only as of now + */ +static long download_firmware(struct kim_data_s *kim_gdata) +{ + long err = 0; + long len = 0; + unsigned char *ptr = NULL; + unsigned char *action_ptr = NULL; + unsigned char bts_scr_name[40] = { 0 }; /* 40 char long bts scr name? */ + int wr_room_space; + int cmd_size; + unsigned long timeout; + + err = read_local_version(kim_gdata, bts_scr_name); + if (err != 0) { + pr_err("kim: failed to read local ver"); + return err; + } + err = + request_firmware(&kim_gdata->fw_entry, bts_scr_name, + &kim_gdata->kim_pdev->dev); + if (unlikely((err != 0) || (kim_gdata->fw_entry->data == NULL) || + (kim_gdata->fw_entry->size == 0))) { + pr_err(" request_firmware failed(errno %ld) for %s", err, + bts_scr_name); + return -EINVAL; + } + ptr = (void *)kim_gdata->fw_entry->data; + len = kim_gdata->fw_entry->size; + /* + * bts_header to remove out magic number and + * version + */ + ptr += sizeof(struct bts_header); + len -= sizeof(struct bts_header); + + while (len > 0 && ptr) { + pr_debug(" action size %d, type %d ", + ((struct bts_action *)ptr)->size, + ((struct bts_action *)ptr)->type); + + switch (((struct bts_action *)ptr)->type) { + case ACTION_SEND_COMMAND: /* action send */ + pr_debug("S"); + action_ptr = &(((struct bts_action *)ptr)->data[0]); + if (unlikely + (((struct hci_command *)action_ptr)->opcode == + 0xFF36)) { + /* + * ignore remote change + * baud rate HCI VS command + */ + pr_warn("change remote baud" + " rate command in firmware"); + skip_change_remote_baud(&ptr, &len); + break; + } + /* + * Make sure we have enough free space in uart + * tx buffer to write current firmware command + */ + cmd_size = ((struct bts_action *)ptr)->size; + timeout = jiffies + msecs_to_jiffies(CMD_WR_TIME); + do { + wr_room_space = + st_get_uart_wr_room(kim_gdata->core_data); + if (wr_room_space < 0) { + pr_err("Unable to get free " + "space info from uart tx buffer"); + release_firmware(kim_gdata->fw_entry); + return wr_room_space; + } + mdelay(1); /* wait 1ms before checking room */ + } while ((wr_room_space < cmd_size) && + time_before(jiffies, timeout)); + + /* Timeout happened ? */ + if (time_after_eq(jiffies, timeout)) { + pr_err("Timeout while waiting for free " + "free space in uart tx buffer"); + release_firmware(kim_gdata->fw_entry); + return -ETIMEDOUT; + } + /* + * reinit completion before sending for the + * relevant wait + */ + reinit_completion(&kim_gdata->kim_rcvd); + + /* + * Free space found in uart buffer, call st_int_write + * to send current firmware command to the uart tx + * buffer. + */ + err = st_int_write(kim_gdata->core_data, + ((struct bts_action_send *)action_ptr)->data, + ((struct bts_action *)ptr)->size); + if (unlikely(err < 0)) { + release_firmware(kim_gdata->fw_entry); + return err; + } + /* + * Check number of bytes written to the uart tx buffer + * and requested command write size + */ + if (err != cmd_size) { + pr_err("Number of bytes written to uart " + "tx buffer are not matching with " + "requested cmd write size"); + release_firmware(kim_gdata->fw_entry); + return -EIO; + } + break; + case ACTION_WAIT_EVENT: /* wait */ + pr_debug("W"); + err = wait_for_completion_interruptible_timeout( + &kim_gdata->kim_rcvd, + msecs_to_jiffies(CMD_RESP_TIME)); + if (err <= 0) { + pr_err("response timeout/signaled during fw download "); + /* timed out */ + release_firmware(kim_gdata->fw_entry); + return err ? -ERESTARTSYS : -ETIMEDOUT; + } + reinit_completion(&kim_gdata->kim_rcvd); + break; + case ACTION_DELAY: /* sleep */ + pr_info("sleep command in scr"); + action_ptr = &(((struct bts_action *)ptr)->data[0]); + mdelay(((struct bts_action_delay *)action_ptr)->msec); + break; + } + len = + len - (sizeof(struct bts_action) + + ((struct bts_action *)ptr)->size); + ptr = + ptr + sizeof(struct bts_action) + + ((struct bts_action *)ptr)->size; + } + /* fw download complete */ + release_firmware(kim_gdata->fw_entry); + return 0; +} + +/**********************************************************************/ +/* functions called from ST core */ +/* called from ST Core, when REG_IN_PROGRESS (registration in progress) + * can be because of + * 1. response to read local version + * 2. during send/recv's of firmware download + */ +void st_kim_recv(void *disc_data, const unsigned char *data, long count) +{ + struct st_data_s *st_gdata = (struct st_data_s *)disc_data; + struct kim_data_s *kim_gdata = st_gdata->kim_data; + + /* + * proceed to gather all data and distinguish read fw version response + * from other fw responses when data gathering is complete + */ + kim_int_recv(kim_gdata, data, count); + return; +} + +/* + * to signal completion of line discipline installation + * called from ST Core, upon tty_open + */ +void st_kim_complete(void *kim_data) +{ + struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data; + complete(&kim_gdata->ldisc_installed); +} + +/* + * st_kim_start - called from ST Core upon 1st registration + * This involves toggling the chip enable gpio, reading + * the firmware version from chip, forming the fw file name + * based on the chip version, requesting the fw, parsing it + * and perform download(send/recv). + */ +long st_kim_start(void *kim_data) +{ + long err = 0; + long retry = POR_RETRY_COUNT; + struct ti_st_plat_data *pdata; + struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data; + + pr_info(" %s", __func__); + pdata = kim_gdata->kim_pdev->dev.platform_data; + + do { + /* platform specific enabling code here */ + if (pdata->chip_enable) + pdata->chip_enable(kim_gdata); + + /* Configure BT nShutdown to HIGH state */ + gpio_set_value_cansleep(kim_gdata->nshutdown, GPIO_LOW); + mdelay(5); /* FIXME: a proper toggle */ + gpio_set_value_cansleep(kim_gdata->nshutdown, GPIO_HIGH); + mdelay(100); + /* re-initialize the completion */ + reinit_completion(&kim_gdata->ldisc_installed); + /* send notification to UIM */ + kim_gdata->ldisc_install = 1; + pr_info("ldisc_install = 1"); + sysfs_notify(&kim_gdata->kim_pdev->dev.kobj, + NULL, "install"); + /* wait for ldisc to be installed */ + err = wait_for_completion_interruptible_timeout( + &kim_gdata->ldisc_installed, msecs_to_jiffies(LDISC_TIME)); + if (!err) { + /* + * ldisc installation timeout, + * flush uart, power cycle BT_EN + */ + pr_err("ldisc installation timeout"); + err = st_kim_stop(kim_gdata); + continue; + } else { + /* ldisc installed now */ + pr_info("line discipline installed"); + err = download_firmware(kim_gdata); + if (err != 0) { + /* + * ldisc installed but fw download failed, + * flush uart & power cycle BT_EN + */ + pr_err("download firmware failed"); + err = st_kim_stop(kim_gdata); + continue; + } else { /* on success don't retry */ + break; + } + } + } while (retry--); + return err; +} + +/* + * st_kim_stop - stop communication with chip. + * This can be called from ST Core/KIM, on the- + * (a) last un-register when chip need not be powered there-after, + * (b) upon failure to either install ldisc or download firmware. + * The function is responsible to (a) notify UIM about un-installation, + * (b) flush UART if the ldisc was installed. + * (c) reset BT_EN - pull down nshutdown at the end. + * (d) invoke platform's chip disabling routine. + */ +long st_kim_stop(void *kim_data) +{ + long err = 0; + struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data; + struct ti_st_plat_data *pdata = + kim_gdata->kim_pdev->dev.platform_data; + struct tty_struct *tty = kim_gdata->core_data->tty; + + reinit_completion(&kim_gdata->ldisc_installed); + + if (tty) { /* can be called before ldisc is installed */ + /* Flush any pending characters in the driver and discipline. */ + tty_ldisc_flush(tty); + tty_driver_flush_buffer(tty); + } + + /* send uninstall notification to UIM */ + pr_info("ldisc_install = 0"); + kim_gdata->ldisc_install = 0; + sysfs_notify(&kim_gdata->kim_pdev->dev.kobj, NULL, "install"); + + /* wait for ldisc to be un-installed */ + err = wait_for_completion_interruptible_timeout( + &kim_gdata->ldisc_installed, msecs_to_jiffies(LDISC_TIME)); + if (!err) { /* timeout */ + pr_err(" timed out waiting for ldisc to be un-installed"); + err = -ETIMEDOUT; + } + + /* By default configure BT nShutdown to LOW state */ + gpio_set_value_cansleep(kim_gdata->nshutdown, GPIO_LOW); + mdelay(1); + gpio_set_value_cansleep(kim_gdata->nshutdown, GPIO_HIGH); + mdelay(1); + gpio_set_value_cansleep(kim_gdata->nshutdown, GPIO_LOW); + + /* platform specific disable */ + if (pdata->chip_disable) + pdata->chip_disable(kim_gdata); + return err; +} + +/**********************************************************************/ +/* functions called from subsystems */ +/* called when debugfs entry is read from */ + +static int version_show(struct seq_file *s, void *unused) +{ + struct kim_data_s *kim_gdata = (struct kim_data_s *)s->private; + seq_printf(s, "%04X %d.%d.%d\n", kim_gdata->version.full, + kim_gdata->version.chip, kim_gdata->version.maj_ver, + kim_gdata->version.min_ver); + return 0; +} + +static int list_show(struct seq_file *s, void *unused) +{ + struct kim_data_s *kim_gdata = (struct kim_data_s *)s->private; + kim_st_list_protocols(kim_gdata->core_data, s); + return 0; +} + +static ssize_t show_install(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct kim_data_s *kim_data = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", kim_data->ldisc_install); +} + +#ifdef DEBUG +static ssize_t store_dev_name(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct kim_data_s *kim_data = dev_get_drvdata(dev); + pr_debug("storing dev name >%s<", buf); + strncpy(kim_data->dev_name, buf, count); + pr_debug("stored dev name >%s<", kim_data->dev_name); + return count; +} + +static ssize_t store_baud_rate(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct kim_data_s *kim_data = dev_get_drvdata(dev); + pr_debug("storing baud rate >%s<", buf); + sscanf(buf, "%ld", &kim_data->baud_rate); + pr_debug("stored baud rate >%ld<", kim_data->baud_rate); + return count; +} +#endif /* if DEBUG */ + +static ssize_t show_dev_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct kim_data_s *kim_data = dev_get_drvdata(dev); + return sprintf(buf, "%s\n", kim_data->dev_name); +} + +static ssize_t show_baud_rate(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct kim_data_s *kim_data = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", kim_data->baud_rate); +} + +static ssize_t show_flow_cntrl(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct kim_data_s *kim_data = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", kim_data->flow_cntrl); +} + +/* structures specific for sysfs entries */ +static struct kobj_attribute ldisc_install = +__ATTR(install, 0444, (void *)show_install, NULL); + +static struct kobj_attribute uart_dev_name = +#ifdef DEBUG /* TODO: move this to debug-fs if possible */ +__ATTR(dev_name, 0644, (void *)show_dev_name, (void *)store_dev_name); +#else +__ATTR(dev_name, 0444, (void *)show_dev_name, NULL); +#endif + +static struct kobj_attribute uart_baud_rate = +#ifdef DEBUG /* TODO: move to debugfs */ +__ATTR(baud_rate, 0644, (void *)show_baud_rate, (void *)store_baud_rate); +#else +__ATTR(baud_rate, 0444, (void *)show_baud_rate, NULL); +#endif + +static struct kobj_attribute uart_flow_cntrl = +__ATTR(flow_cntrl, 0444, (void *)show_flow_cntrl, NULL); + +static struct attribute *uim_attrs[] = { + &ldisc_install.attr, + &uart_dev_name.attr, + &uart_baud_rate.attr, + &uart_flow_cntrl.attr, + NULL, +}; + +static const struct attribute_group uim_attr_grp = { + .attrs = uim_attrs, +}; + +/* + * st_kim_ref - reference the core's data + * This references the per-ST platform device in the arch/xx/ + * board-xx.c file. + * This would enable multiple such platform devices to exist + * on a given platform + */ +void st_kim_ref(struct st_data_s **core_data, int id) +{ + struct platform_device *pdev; + struct kim_data_s *kim_gdata; + /* get kim_gdata reference from platform device */ + pdev = st_get_plat_device(id); + if (!pdev) + goto err; + kim_gdata = platform_get_drvdata(pdev); + if (!kim_gdata) + goto err; + + *core_data = kim_gdata->core_data; + return; +err: + *core_data = NULL; +} + +DEFINE_SHOW_ATTRIBUTE(version); +DEFINE_SHOW_ATTRIBUTE(list); + +/**********************************************************************/ +/* functions called from platform device driver subsystem + * need to have a relevant platform device entry in the platform's + * board-*.c file + */ + +static struct dentry *kim_debugfs_dir; +static int kim_probe(struct platform_device *pdev) +{ + struct kim_data_s *kim_gdata; + struct ti_st_plat_data *pdata = pdev->dev.platform_data; + int err; + + if ((pdev->id != -1) && (pdev->id < MAX_ST_DEVICES)) { + /* multiple devices could exist */ + st_kim_devices[pdev->id] = pdev; + } else { + /* platform's sure about existence of 1 device */ + st_kim_devices[0] = pdev; + } + + kim_gdata = kzalloc(sizeof(struct kim_data_s), GFP_KERNEL); + if (!kim_gdata) { + pr_err("no mem to allocate"); + return -ENOMEM; + } + platform_set_drvdata(pdev, kim_gdata); + + err = st_core_init(&kim_gdata->core_data); + if (err != 0) { + pr_err(" ST core init failed"); + err = -EIO; + goto err_core_init; + } + /* refer to itself */ + kim_gdata->core_data->kim_data = kim_gdata; + + /* Claim the chip enable nShutdown gpio from the system */ + kim_gdata->nshutdown = pdata->nshutdown_gpio; + err = gpio_request(kim_gdata->nshutdown, "kim"); + if (unlikely(err)) { + pr_err(" gpio %d request failed ", kim_gdata->nshutdown); + goto err_sysfs_group; + } + + /* Configure nShutdown GPIO as output=0 */ + err = gpio_direction_output(kim_gdata->nshutdown, 0); + if (unlikely(err)) { + pr_err(" unable to configure gpio %d", kim_gdata->nshutdown); + goto err_sysfs_group; + } + /* get reference of pdev for request_firmware */ + kim_gdata->kim_pdev = pdev; + init_completion(&kim_gdata->kim_rcvd); + init_completion(&kim_gdata->ldisc_installed); + + err = sysfs_create_group(&pdev->dev.kobj, &uim_attr_grp); + if (err) { + pr_err("failed to create sysfs entries"); + goto err_sysfs_group; + } + + /* copying platform data */ + strncpy(kim_gdata->dev_name, pdata->dev_name, UART_DEV_NAME_LEN); + kim_gdata->flow_cntrl = pdata->flow_cntrl; + kim_gdata->baud_rate = pdata->baud_rate; + pr_info("sysfs entries created\n"); + + kim_debugfs_dir = debugfs_create_dir("ti-st", NULL); + + debugfs_create_file("version", S_IRUGO, kim_debugfs_dir, + kim_gdata, &version_fops); + debugfs_create_file("protocols", S_IRUGO, kim_debugfs_dir, + kim_gdata, &list_fops); + return 0; + +err_sysfs_group: + st_core_exit(kim_gdata->core_data); + +err_core_init: + kfree(kim_gdata); + + return err; +} + +static int kim_remove(struct platform_device *pdev) +{ + /* free the GPIOs requested */ + struct ti_st_plat_data *pdata = pdev->dev.platform_data; + struct kim_data_s *kim_gdata; + + kim_gdata = platform_get_drvdata(pdev); + + /* + * Free the Bluetooth/FM/GPIO + * nShutdown gpio from the system + */ + gpio_free(pdata->nshutdown_gpio); + pr_info("nshutdown GPIO Freed"); + + debugfs_remove_recursive(kim_debugfs_dir); + sysfs_remove_group(&pdev->dev.kobj, &uim_attr_grp); + pr_info("sysfs entries removed"); + + kim_gdata->kim_pdev = NULL; + st_core_exit(kim_gdata->core_data); + + kfree(kim_gdata); + kim_gdata = NULL; + return 0; +} + +static int kim_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct ti_st_plat_data *pdata = pdev->dev.platform_data; + + if (pdata->suspend) + return pdata->suspend(pdev, state); + + return 0; +} + +static int kim_resume(struct platform_device *pdev) +{ + struct ti_st_plat_data *pdata = pdev->dev.platform_data; + + if (pdata->resume) + return pdata->resume(pdev); + + return 0; +} + +/**********************************************************************/ +/* entry point for ST KIM module, called in from ST Core */ +static struct platform_driver kim_platform_driver = { + .probe = kim_probe, + .remove = kim_remove, + .suspend = kim_suspend, + .resume = kim_resume, + .driver = { + .name = "kim", + }, +}; + +module_platform_driver(kim_platform_driver); + +MODULE_AUTHOR("Pavan Savoy <pavan_savoy@ti.com>"); +MODULE_DESCRIPTION("Shared Transport Driver for TI BT/FM/GPS combo chips "); +MODULE_LICENSE("GPL"); |