diff options
Diffstat (limited to 'drivers/mmc/core')
41 files changed, 22810 insertions, 0 deletions
diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig new file mode 100644 index 000000000..c12fe13e4 --- /dev/null +++ b/drivers/mmc/core/Kconfig @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# MMC core configuration +# +config PWRSEQ_EMMC + tristate "HW reset support for eMMC" + default y + depends on OF + help + This selects Hardware reset support aka pwrseq-emmc for eMMC + devices. By default this option is set to y. + + This driver can also be built as a module. If so, the module + will be called pwrseq_emmc. + +config PWRSEQ_SD8787 + tristate "HW reset support for SD8787 BT + Wifi module" + depends on OF && (MWIFIEX || BT_MRVL_SDIO || LIBERTAS_SDIO) + help + This selects hardware reset support for the SD8787 BT + Wifi + module. By default this option is set to n. + + This driver can also be built as a module. If so, the module + will be called pwrseq_sd8787. + +config PWRSEQ_SIMPLE + tristate "Simple HW reset support for MMC" + default y + depends on OF + help + This selects simple hardware reset support aka pwrseq-simple for MMC + devices. By default this option is set to y. + + This driver can also be built as a module. If so, the module + will be called pwrseq_simple. + +config MMC_BLOCK + tristate "MMC block device driver" + depends on BLOCK + default y + help + Say Y here to enable the MMC block device driver support. + This provides a block device driver, which you can use to + mount the filesystem. Almost everyone wishing MMC support + should say Y or M here. + +config MMC_BLOCK_MINORS + int "Number of minors per block device" + depends on MMC_BLOCK + range 4 256 + default 8 + help + Number of minors per block device. One is needed for every + partition on the disk (plus one for the whole disk). + + Number of total MMC minors available is 256, so your number + of supported block devices will be limited to 256 divided + by this number. + + Default is 8 to be backwards compatible with previous + hardwired device numbering. + + If unsure, say 8 here. + +config SDIO_UART + tristate "SDIO UART/GPS class support" + depends on TTY + help + SDIO function driver for SDIO cards that implements the UART + class, as well as the GPS class which appears like a UART. + +config MMC_TEST + tristate "MMC host test driver" + help + Development driver that performs a series of reads and writes + to a memory card in order to expose certain well known bugs + in host controllers. The tests are executed by writing to the + "test" file in debugfs under each card. Note that whatever is + on your card will be overwritten by these tests. + + This driver is only of interest to those developing or + testing a host driver. Most people should say N here. + diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile new file mode 100644 index 000000000..95ffe008e --- /dev/null +++ b/drivers/mmc/core/Makefile @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the kernel mmc core. +# + +obj-$(CONFIG_MMC) += mmc_core.o +mmc_core-y := core.o bus.o host.o \ + mmc.o mmc_ops.o sd.o sd_ops.o \ + sdio.o sdio_ops.o sdio_bus.o \ + sdio_cis.o sdio_io.o sdio_irq.o \ + slot-gpio.o regulator.o +mmc_core-$(CONFIG_OF) += pwrseq.o +obj-$(CONFIG_PWRSEQ_SIMPLE) += pwrseq_simple.o +obj-$(CONFIG_PWRSEQ_SD8787) += pwrseq_sd8787.o +obj-$(CONFIG_PWRSEQ_EMMC) += pwrseq_emmc.o +mmc_core-$(CONFIG_DEBUG_FS) += debugfs.o +obj-$(CONFIG_MMC_BLOCK) += mmc_block.o +mmc_block-objs := block.o queue.o +obj-$(CONFIG_MMC_TEST) += mmc_test.o +obj-$(CONFIG_SDIO_UART) += sdio_uart.o diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c new file mode 100644 index 000000000..8d842ff24 --- /dev/null +++ b/drivers/mmc/core/block.c @@ -0,0 +1,3106 @@ +/* + * Block driver for media (i.e., flash cards) + * + * Copyright 2002 Hewlett-Packard Company + * Copyright 2005-2008 Pierre Ossman + * + * Use consistent with the GNU GPL is permitted, + * provided that this copyright notice is + * preserved in its entirety in all copies and derived works. + * + * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, + * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS + * FITNESS FOR ANY PARTICULAR PURPOSE. + * + * Many thanks to Alessandro Rubini and Jonathan Corbet! + * + * Author: Andrew Christian + * 28 May 2002 + */ +#include <linux/moduleparam.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/hdreg.h> +#include <linux/kdev_t.h> +#include <linux/blkdev.h> +#include <linux/cdev.h> +#include <linux/mutex.h> +#include <linux/scatterlist.h> +#include <linux/string_helpers.h> +#include <linux/delay.h> +#include <linux/capability.h> +#include <linux/compat.h> +#include <linux/pm_runtime.h> +#include <linux/idr.h> +#include <linux/debugfs.h> + +#include <linux/mmc/ioctl.h> +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sd.h> + +#include <linux/uaccess.h> + +#include "queue.h" +#include "block.h" +#include "core.h" +#include "card.h" +#include "host.h" +#include "bus.h" +#include "mmc_ops.h" +#include "quirks.h" +#include "sd_ops.h" + +MODULE_ALIAS("mmc:block"); +#ifdef MODULE_PARAM_PREFIX +#undef MODULE_PARAM_PREFIX +#endif +#define MODULE_PARAM_PREFIX "mmcblk." + +/* + * Set a 10 second timeout for polling write request busy state. Note, mmc core + * is setting a 3 second timeout for SD cards, and SDHCI has long had a 10 + * second software timer to timeout the whole request, so 10 seconds should be + * ample. + */ +#define MMC_BLK_TIMEOUT_MS (10 * 1000) +#define MMC_EXTRACT_INDEX_FROM_ARG(x) ((x & 0x00FF0000) >> 16) +#define MMC_EXTRACT_VALUE_FROM_ARG(x) ((x & 0x0000FF00) >> 8) + +#define mmc_req_rel_wr(req) ((req->cmd_flags & REQ_FUA) && \ + (rq_data_dir(req) == WRITE)) +static DEFINE_MUTEX(block_mutex); + +/* + * The defaults come from config options but can be overriden by module + * or bootarg options. + */ +static int perdev_minors = CONFIG_MMC_BLOCK_MINORS; + +/* + * We've only got one major, so number of mmcblk devices is + * limited to (1 << 20) / number of minors per device. It is also + * limited by the MAX_DEVICES below. + */ +static int max_devices; + +#define MAX_DEVICES 256 + +static DEFINE_IDA(mmc_blk_ida); +static DEFINE_IDA(mmc_rpmb_ida); + +/* + * There is one mmc_blk_data per slot. + */ +struct mmc_blk_data { + struct device *parent; + struct gendisk *disk; + struct mmc_queue queue; + struct list_head part; + struct list_head rpmbs; + + unsigned int flags; +#define MMC_BLK_CMD23 (1 << 0) /* Can do SET_BLOCK_COUNT for multiblock */ +#define MMC_BLK_REL_WR (1 << 1) /* MMC Reliable write support */ + + unsigned int usage; + unsigned int read_only; + unsigned int part_type; + unsigned int reset_done; +#define MMC_BLK_READ BIT(0) +#define MMC_BLK_WRITE BIT(1) +#define MMC_BLK_DISCARD BIT(2) +#define MMC_BLK_SECDISCARD BIT(3) +#define MMC_BLK_CQE_RECOVERY BIT(4) + + /* + * Only set in main mmc_blk_data associated + * with mmc_card with dev_set_drvdata, and keeps + * track of the current selected device partition. + */ + unsigned int part_curr; + struct device_attribute force_ro; + struct device_attribute power_ro_lock; + int area_type; + + /* debugfs files (only in main mmc_blk_data) */ + struct dentry *status_dentry; + struct dentry *ext_csd_dentry; +}; + +/* Device type for RPMB character devices */ +static dev_t mmc_rpmb_devt; + +/* Bus type for RPMB character devices */ +static struct bus_type mmc_rpmb_bus_type = { + .name = "mmc_rpmb", +}; + +/** + * struct mmc_rpmb_data - special RPMB device type for these areas + * @dev: the device for the RPMB area + * @chrdev: character device for the RPMB area + * @id: unique device ID number + * @part_index: partition index (0 on first) + * @md: parent MMC block device + * @node: list item, so we can put this device on a list + */ +struct mmc_rpmb_data { + struct device dev; + struct cdev chrdev; + int id; + unsigned int part_index; + struct mmc_blk_data *md; + struct list_head node; +}; + +static DEFINE_MUTEX(open_lock); + +module_param(perdev_minors, int, 0444); +MODULE_PARM_DESC(perdev_minors, "Minors numbers to allocate per device"); + +static inline int mmc_blk_part_switch(struct mmc_card *card, + unsigned int part_type); +static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, + struct mmc_card *card, + int recovery_mode, + struct mmc_queue *mq); +static void mmc_blk_hsq_req_done(struct mmc_request *mrq); + +static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk) +{ + struct mmc_blk_data *md; + + mutex_lock(&open_lock); + md = disk->private_data; + if (md && md->usage == 0) + md = NULL; + if (md) + md->usage++; + mutex_unlock(&open_lock); + + return md; +} + +static inline int mmc_get_devidx(struct gendisk *disk) +{ + int devidx = disk->first_minor / perdev_minors; + return devidx; +} + +static void mmc_blk_put(struct mmc_blk_data *md) +{ + mutex_lock(&open_lock); + md->usage--; + if (md->usage == 0) { + int devidx = mmc_get_devidx(md->disk); + blk_put_queue(md->queue.queue); + ida_simple_remove(&mmc_blk_ida, devidx); + put_disk(md->disk); + kfree(md); + } + mutex_unlock(&open_lock); +} + +static ssize_t power_ro_lock_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int ret; + struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev)); + struct mmc_card *card = md->queue.card; + int locked = 0; + + if (card->ext_csd.boot_ro_lock & EXT_CSD_BOOT_WP_B_PERM_WP_EN) + locked = 2; + else if (card->ext_csd.boot_ro_lock & EXT_CSD_BOOT_WP_B_PWR_WP_EN) + locked = 1; + + ret = snprintf(buf, PAGE_SIZE, "%d\n", locked); + + mmc_blk_put(md); + + return ret; +} + +static ssize_t power_ro_lock_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int ret; + struct mmc_blk_data *md, *part_md; + struct mmc_queue *mq; + struct request *req; + unsigned long set; + + if (kstrtoul(buf, 0, &set)) + return -EINVAL; + + if (set != 1) + return count; + + md = mmc_blk_get(dev_to_disk(dev)); + mq = &md->queue; + + /* Dispatch locking to the block layer */ + req = blk_get_request(mq->queue, REQ_OP_DRV_OUT, 0); + if (IS_ERR(req)) { + count = PTR_ERR(req); + goto out_put; + } + req_to_mmc_queue_req(req)->drv_op = MMC_DRV_OP_BOOT_WP; + req_to_mmc_queue_req(req)->drv_op_result = -EIO; + blk_execute_rq(mq->queue, NULL, req, 0); + ret = req_to_mmc_queue_req(req)->drv_op_result; + blk_put_request(req); + + if (!ret) { + pr_info("%s: Locking boot partition ro until next power on\n", + md->disk->disk_name); + set_disk_ro(md->disk, 1); + + list_for_each_entry(part_md, &md->part, part) + if (part_md->area_type == MMC_BLK_DATA_AREA_BOOT) { + pr_info("%s: Locking boot partition ro until next power on\n", part_md->disk->disk_name); + set_disk_ro(part_md->disk, 1); + } + } +out_put: + mmc_blk_put(md); + return count; +} + +static ssize_t force_ro_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int ret; + struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev)); + + ret = snprintf(buf, PAGE_SIZE, "%d\n", + get_disk_ro(dev_to_disk(dev)) ^ + md->read_only); + mmc_blk_put(md); + return ret; +} + +static ssize_t force_ro_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret; + char *end; + struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev)); + unsigned long set = simple_strtoul(buf, &end, 0); + if (end == buf) { + ret = -EINVAL; + goto out; + } + + set_disk_ro(dev_to_disk(dev), set || md->read_only); + ret = count; +out: + mmc_blk_put(md); + return ret; +} + +static int mmc_blk_open(struct block_device *bdev, fmode_t mode) +{ + struct mmc_blk_data *md = mmc_blk_get(bdev->bd_disk); + int ret = -ENXIO; + + mutex_lock(&block_mutex); + if (md) { + ret = 0; + if ((mode & FMODE_WRITE) && md->read_only) { + mmc_blk_put(md); + ret = -EROFS; + } + } + mutex_unlock(&block_mutex); + + return ret; +} + +static void mmc_blk_release(struct gendisk *disk, fmode_t mode) +{ + struct mmc_blk_data *md = disk->private_data; + + mutex_lock(&block_mutex); + mmc_blk_put(md); + mutex_unlock(&block_mutex); +} + +static int +mmc_blk_getgeo(struct block_device *bdev, struct hd_geometry *geo) +{ + geo->cylinders = get_capacity(bdev->bd_disk) / (4 * 16); + geo->heads = 4; + geo->sectors = 16; + return 0; +} + +struct mmc_blk_ioc_data { + struct mmc_ioc_cmd ic; + unsigned char *buf; + u64 buf_bytes; + struct mmc_rpmb_data *rpmb; +}; + +static struct mmc_blk_ioc_data *mmc_blk_ioctl_copy_from_user( + struct mmc_ioc_cmd __user *user) +{ + struct mmc_blk_ioc_data *idata; + int err; + + idata = kmalloc(sizeof(*idata), GFP_KERNEL); + if (!idata) { + err = -ENOMEM; + goto out; + } + + if (copy_from_user(&idata->ic, user, sizeof(idata->ic))) { + err = -EFAULT; + goto idata_err; + } + + idata->buf_bytes = (u64) idata->ic.blksz * idata->ic.blocks; + if (idata->buf_bytes > MMC_IOC_MAX_BYTES) { + err = -EOVERFLOW; + goto idata_err; + } + + if (!idata->buf_bytes) { + idata->buf = NULL; + return idata; + } + + idata->buf = memdup_user((void __user *)(unsigned long) + idata->ic.data_ptr, idata->buf_bytes); + if (IS_ERR(idata->buf)) { + err = PTR_ERR(idata->buf); + goto idata_err; + } + + return idata; + +idata_err: + kfree(idata); +out: + return ERR_PTR(err); +} + +static int mmc_blk_ioctl_copy_to_user(struct mmc_ioc_cmd __user *ic_ptr, + struct mmc_blk_ioc_data *idata) +{ + struct mmc_ioc_cmd *ic = &idata->ic; + + if (copy_to_user(&(ic_ptr->response), ic->response, + sizeof(ic->response))) + return -EFAULT; + + if (!idata->ic.write_flag) { + if (copy_to_user((void __user *)(unsigned long)ic->data_ptr, + idata->buf, idata->buf_bytes)) + return -EFAULT; + } + + return 0; +} + +static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms, + u32 *resp_errs) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms); + int err = 0; + u32 status; + + do { + bool done = time_after(jiffies, timeout); + + err = __mmc_send_status(card, &status, 5); + if (err) { + dev_err(mmc_dev(card->host), + "error %d requesting status\n", err); + return err; + } + + /* Accumulate any response error bits seen */ + if (resp_errs) + *resp_errs |= status; + + /* + * Timeout if the device never becomes ready for data and never + * leaves the program state. + */ + if (done) { + dev_err(mmc_dev(card->host), + "Card stuck in wrong state! %s status: %#x\n", + __func__, status); + return -ETIMEDOUT; + } + } while (!mmc_ready_for_data(status)); + + return err; +} + +static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md, + struct mmc_blk_ioc_data *idata) +{ + struct mmc_command cmd = {}, sbc = {}; + struct mmc_data data = {}; + struct mmc_request mrq = {}; + struct scatterlist sg; + int err; + unsigned int target_part; + + if (!card || !md || !idata) + return -EINVAL; + + /* + * The RPMB accesses comes in from the character device, so we + * need to target these explicitly. Else we just target the + * partition type for the block device the ioctl() was issued + * on. + */ + if (idata->rpmb) { + /* Support multiple RPMB partitions */ + target_part = idata->rpmb->part_index; + target_part |= EXT_CSD_PART_CONFIG_ACC_RPMB; + } else { + target_part = md->part_type; + } + + cmd.opcode = idata->ic.opcode; + cmd.arg = idata->ic.arg; + cmd.flags = idata->ic.flags; + + if (idata->buf_bytes) { + data.sg = &sg; + data.sg_len = 1; + data.blksz = idata->ic.blksz; + data.blocks = idata->ic.blocks; + + sg_init_one(data.sg, idata->buf, idata->buf_bytes); + + if (idata->ic.write_flag) + data.flags = MMC_DATA_WRITE; + else + data.flags = MMC_DATA_READ; + + /* data.flags must already be set before doing this. */ + mmc_set_data_timeout(&data, card); + + /* Allow overriding the timeout_ns for empirical tuning. */ + if (idata->ic.data_timeout_ns) + data.timeout_ns = idata->ic.data_timeout_ns; + + if ((cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) { + /* + * Pretend this is a data transfer and rely on the + * host driver to compute timeout. When all host + * drivers support cmd.cmd_timeout for R1B, this + * can be changed to: + * + * mrq.data = NULL; + * cmd.cmd_timeout = idata->ic.cmd_timeout_ms; + */ + data.timeout_ns = idata->ic.cmd_timeout_ms * 1000000; + } + + mrq.data = &data; + } + + mrq.cmd = &cmd; + + err = mmc_blk_part_switch(card, target_part); + if (err) + return err; + + if (idata->ic.is_acmd) { + err = mmc_app_cmd(card->host, card); + if (err) + return err; + } + + if (idata->rpmb) { + sbc.opcode = MMC_SET_BLOCK_COUNT; + /* + * We don't do any blockcount validation because the max size + * may be increased by a future standard. We just copy the + * 'Reliable Write' bit here. + */ + sbc.arg = data.blocks | (idata->ic.write_flag & BIT(31)); + sbc.flags = MMC_RSP_R1 | MMC_CMD_AC; + mrq.sbc = &sbc; + } + + if ((MMC_EXTRACT_INDEX_FROM_ARG(cmd.arg) == EXT_CSD_SANITIZE_START) && + (cmd.opcode == MMC_SWITCH)) + return mmc_sanitize(card); + + mmc_wait_for_req(card->host, &mrq); + memcpy(&idata->ic.response, cmd.resp, sizeof(cmd.resp)); + + if (cmd.error) { + dev_err(mmc_dev(card->host), "%s: cmd error %d\n", + __func__, cmd.error); + return cmd.error; + } + if (data.error) { + dev_err(mmc_dev(card->host), "%s: data error %d\n", + __func__, data.error); + return data.error; + } + + /* + * Make sure the cache of the PARTITION_CONFIG register and + * PARTITION_ACCESS bits is updated in case the ioctl ext_csd write + * changed it successfully. + */ + if ((MMC_EXTRACT_INDEX_FROM_ARG(cmd.arg) == EXT_CSD_PART_CONFIG) && + (cmd.opcode == MMC_SWITCH)) { + struct mmc_blk_data *main_md = dev_get_drvdata(&card->dev); + u8 value = MMC_EXTRACT_VALUE_FROM_ARG(cmd.arg); + + /* + * Update cache so the next mmc_blk_part_switch call operates + * on up-to-date data. + */ + card->ext_csd.part_config = value; + main_md->part_curr = value & EXT_CSD_PART_CONFIG_ACC_MASK; + } + + /* + * Make sure to update CACHE_CTRL in case it was changed. The cache + * will get turned back on if the card is re-initialized, e.g. + * suspend/resume or hw reset in recovery. + */ + if ((MMC_EXTRACT_INDEX_FROM_ARG(cmd.arg) == EXT_CSD_CACHE_CTRL) && + (cmd.opcode == MMC_SWITCH)) { + u8 value = MMC_EXTRACT_VALUE_FROM_ARG(cmd.arg) & 1; + + card->ext_csd.cache_ctrl = value; + } + + /* + * According to the SD specs, some commands require a delay after + * issuing the command. + */ + if (idata->ic.postsleep_min_us) + usleep_range(idata->ic.postsleep_min_us, idata->ic.postsleep_max_us); + + if (idata->rpmb || (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) { + /* + * Ensure RPMB/R1B command has completed by polling CMD13 + * "Send Status". + */ + err = card_busy_detect(card, MMC_BLK_TIMEOUT_MS, NULL); + } + + return err; +} + +static int mmc_blk_ioctl_cmd(struct mmc_blk_data *md, + struct mmc_ioc_cmd __user *ic_ptr, + struct mmc_rpmb_data *rpmb) +{ + struct mmc_blk_ioc_data *idata; + struct mmc_blk_ioc_data *idatas[1]; + struct mmc_queue *mq; + struct mmc_card *card; + int err = 0, ioc_err = 0; + struct request *req; + + idata = mmc_blk_ioctl_copy_from_user(ic_ptr); + if (IS_ERR(idata)) + return PTR_ERR(idata); + /* This will be NULL on non-RPMB ioctl():s */ + idata->rpmb = rpmb; + + card = md->queue.card; + if (IS_ERR(card)) { + err = PTR_ERR(card); + goto cmd_done; + } + + /* + * Dispatch the ioctl() into the block request queue. + */ + mq = &md->queue; + req = blk_get_request(mq->queue, + idata->ic.write_flag ? REQ_OP_DRV_OUT : REQ_OP_DRV_IN, 0); + if (IS_ERR(req)) { + err = PTR_ERR(req); + goto cmd_done; + } + idatas[0] = idata; + req_to_mmc_queue_req(req)->drv_op = + rpmb ? MMC_DRV_OP_IOCTL_RPMB : MMC_DRV_OP_IOCTL; + req_to_mmc_queue_req(req)->drv_op_result = -EIO; + req_to_mmc_queue_req(req)->drv_op_data = idatas; + req_to_mmc_queue_req(req)->ioc_count = 1; + blk_execute_rq(mq->queue, NULL, req, 0); + ioc_err = req_to_mmc_queue_req(req)->drv_op_result; + err = mmc_blk_ioctl_copy_to_user(ic_ptr, idata); + blk_put_request(req); + +cmd_done: + kfree(idata->buf); + kfree(idata); + return ioc_err ? ioc_err : err; +} + +static int mmc_blk_ioctl_multi_cmd(struct mmc_blk_data *md, + struct mmc_ioc_multi_cmd __user *user, + struct mmc_rpmb_data *rpmb) +{ + struct mmc_blk_ioc_data **idata = NULL; + struct mmc_ioc_cmd __user *cmds = user->cmds; + struct mmc_card *card; + struct mmc_queue *mq; + int i, err = 0, ioc_err = 0; + __u64 num_of_cmds; + struct request *req; + + if (copy_from_user(&num_of_cmds, &user->num_of_cmds, + sizeof(num_of_cmds))) + return -EFAULT; + + if (!num_of_cmds) + return 0; + + if (num_of_cmds > MMC_IOC_MAX_CMDS) + return -EINVAL; + + idata = kcalloc(num_of_cmds, sizeof(*idata), GFP_KERNEL); + if (!idata) + return -ENOMEM; + + for (i = 0; i < num_of_cmds; i++) { + idata[i] = mmc_blk_ioctl_copy_from_user(&cmds[i]); + if (IS_ERR(idata[i])) { + err = PTR_ERR(idata[i]); + num_of_cmds = i; + goto cmd_err; + } + /* This will be NULL on non-RPMB ioctl():s */ + idata[i]->rpmb = rpmb; + } + + card = md->queue.card; + if (IS_ERR(card)) { + err = PTR_ERR(card); + goto cmd_err; + } + + + /* + * Dispatch the ioctl()s into the block request queue. + */ + mq = &md->queue; + req = blk_get_request(mq->queue, + idata[0]->ic.write_flag ? REQ_OP_DRV_OUT : REQ_OP_DRV_IN, 0); + if (IS_ERR(req)) { + err = PTR_ERR(req); + goto cmd_err; + } + req_to_mmc_queue_req(req)->drv_op = + rpmb ? MMC_DRV_OP_IOCTL_RPMB : MMC_DRV_OP_IOCTL; + req_to_mmc_queue_req(req)->drv_op_result = -EIO; + req_to_mmc_queue_req(req)->drv_op_data = idata; + req_to_mmc_queue_req(req)->ioc_count = num_of_cmds; + blk_execute_rq(mq->queue, NULL, req, 0); + ioc_err = req_to_mmc_queue_req(req)->drv_op_result; + + /* copy to user if data and response */ + for (i = 0; i < num_of_cmds && !err; i++) + err = mmc_blk_ioctl_copy_to_user(&cmds[i], idata[i]); + + blk_put_request(req); + +cmd_err: + for (i = 0; i < num_of_cmds; i++) { + kfree(idata[i]->buf); + kfree(idata[i]); + } + kfree(idata); + return ioc_err ? ioc_err : err; +} + +static int mmc_blk_check_blkdev(struct block_device *bdev) +{ + /* + * The caller must have CAP_SYS_RAWIO, and must be calling this on the + * whole block device, not on a partition. This prevents overspray + * between sibling partitions. + */ + if (!capable(CAP_SYS_RAWIO) || bdev_is_partition(bdev)) + return -EPERM; + return 0; +} + +static int mmc_blk_ioctl(struct block_device *bdev, fmode_t mode, + unsigned int cmd, unsigned long arg) +{ + struct mmc_blk_data *md; + int ret; + + switch (cmd) { + case MMC_IOC_CMD: + ret = mmc_blk_check_blkdev(bdev); + if (ret) + return ret; + md = mmc_blk_get(bdev->bd_disk); + if (!md) + return -EINVAL; + ret = mmc_blk_ioctl_cmd(md, + (struct mmc_ioc_cmd __user *)arg, + NULL); + mmc_blk_put(md); + return ret; + case MMC_IOC_MULTI_CMD: + ret = mmc_blk_check_blkdev(bdev); + if (ret) + return ret; + md = mmc_blk_get(bdev->bd_disk); + if (!md) + return -EINVAL; + ret = mmc_blk_ioctl_multi_cmd(md, + (struct mmc_ioc_multi_cmd __user *)arg, + NULL); + mmc_blk_put(md); + return ret; + default: + return -EINVAL; + } +} + +#ifdef CONFIG_COMPAT +static int mmc_blk_compat_ioctl(struct block_device *bdev, fmode_t mode, + unsigned int cmd, unsigned long arg) +{ + return mmc_blk_ioctl(bdev, mode, cmd, (unsigned long) compat_ptr(arg)); +} +#endif + +static const struct block_device_operations mmc_bdops = { + .open = mmc_blk_open, + .release = mmc_blk_release, + .getgeo = mmc_blk_getgeo, + .owner = THIS_MODULE, + .ioctl = mmc_blk_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = mmc_blk_compat_ioctl, +#endif +}; + +static int mmc_blk_part_switch_pre(struct mmc_card *card, + unsigned int part_type) +{ + const unsigned int mask = EXT_CSD_PART_CONFIG_ACC_RPMB; + int ret = 0; + + if ((part_type & mask) == mask) { + if (card->ext_csd.cmdq_en) { + ret = mmc_cmdq_disable(card); + if (ret) + return ret; + } + mmc_retune_pause(card->host); + } + + return ret; +} + +static int mmc_blk_part_switch_post(struct mmc_card *card, + unsigned int part_type) +{ + const unsigned int mask = EXT_CSD_PART_CONFIG_ACC_RPMB; + int ret = 0; + + if ((part_type & mask) == mask) { + mmc_retune_unpause(card->host); + if (card->reenable_cmdq && !card->ext_csd.cmdq_en) + ret = mmc_cmdq_enable(card); + } + + return ret; +} + +static inline int mmc_blk_part_switch(struct mmc_card *card, + unsigned int part_type) +{ + int ret = 0; + struct mmc_blk_data *main_md = dev_get_drvdata(&card->dev); + + if (main_md->part_curr == part_type) + return 0; + + if (mmc_card_mmc(card)) { + u8 part_config = card->ext_csd.part_config; + + ret = mmc_blk_part_switch_pre(card, part_type); + if (ret) + return ret; + + part_config &= ~EXT_CSD_PART_CONFIG_ACC_MASK; + part_config |= part_type; + + ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_PART_CONFIG, part_config, + card->ext_csd.part_time); + if (ret) { + mmc_blk_part_switch_post(card, part_type); + return ret; + } + + card->ext_csd.part_config = part_config; + + ret = mmc_blk_part_switch_post(card, main_md->part_curr); + } + + main_md->part_curr = part_type; + return ret; +} + +static int mmc_sd_num_wr_blocks(struct mmc_card *card, u32 *written_blocks) +{ + int err; + u32 result; + __be32 *blocks; + + struct mmc_request mrq = {}; + struct mmc_command cmd = {}; + struct mmc_data data = {}; + + struct scatterlist sg; + + cmd.opcode = MMC_APP_CMD; + cmd.arg = card->rca << 16; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + + err = mmc_wait_for_cmd(card->host, &cmd, 0); + if (err) + return err; + if (!mmc_host_is_spi(card->host) && !(cmd.resp[0] & R1_APP_CMD)) + return -EIO; + + memset(&cmd, 0, sizeof(struct mmc_command)); + + cmd.opcode = SD_APP_SEND_NUM_WR_BLKS; + cmd.arg = 0; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; + + data.blksz = 4; + data.blocks = 1; + data.flags = MMC_DATA_READ; + data.sg = &sg; + data.sg_len = 1; + mmc_set_data_timeout(&data, card); + + mrq.cmd = &cmd; + mrq.data = &data; + + blocks = kmalloc(4, GFP_KERNEL); + if (!blocks) + return -ENOMEM; + + sg_init_one(&sg, blocks, 4); + + mmc_wait_for_req(card->host, &mrq); + + result = ntohl(*blocks); + kfree(blocks); + + if (cmd.error || data.error) + return -EIO; + + *written_blocks = result; + + return 0; +} + +static unsigned int mmc_blk_clock_khz(struct mmc_host *host) +{ + if (host->actual_clock) + return host->actual_clock / 1000; + + /* Clock may be subject to a divisor, fudge it by a factor of 2. */ + if (host->ios.clock) + return host->ios.clock / 2000; + + /* How can there be no clock */ + WARN_ON_ONCE(1); + return 100; /* 100 kHz is minimum possible value */ +} + +static unsigned int mmc_blk_data_timeout_ms(struct mmc_host *host, + struct mmc_data *data) +{ + unsigned int ms = DIV_ROUND_UP(data->timeout_ns, 1000000); + unsigned int khz; + + if (data->timeout_clks) { + khz = mmc_blk_clock_khz(host); + ms += DIV_ROUND_UP(data->timeout_clks, khz); + } + + return ms; +} + +static int mmc_blk_reset(struct mmc_blk_data *md, struct mmc_host *host, + int type) +{ + int err; + + if (md->reset_done & type) + return -EEXIST; + + md->reset_done |= type; + err = mmc_hw_reset(host); + /* Ensure we switch back to the correct partition */ + if (err != -EOPNOTSUPP) { + struct mmc_blk_data *main_md = + dev_get_drvdata(&host->card->dev); + int part_err; + + main_md->part_curr = main_md->part_type; + part_err = mmc_blk_part_switch(host->card, md->part_type); + if (part_err) { + /* + * We have failed to get back into the correct + * partition, so we need to abort the whole request. + */ + return -ENODEV; + } + } + return err; +} + +static inline void mmc_blk_reset_success(struct mmc_blk_data *md, int type) +{ + md->reset_done &= ~type; +} + +/* + * The non-block commands come back from the block layer after it queued it and + * processed it with all other requests and then they get issued in this + * function. + */ +static void mmc_blk_issue_drv_op(struct mmc_queue *mq, struct request *req) +{ + struct mmc_queue_req *mq_rq; + struct mmc_card *card = mq->card; + struct mmc_blk_data *md = mq->blkdata; + struct mmc_blk_ioc_data **idata; + bool rpmb_ioctl; + u8 **ext_csd; + u32 status; + int ret; + int i; + + mq_rq = req_to_mmc_queue_req(req); + rpmb_ioctl = (mq_rq->drv_op == MMC_DRV_OP_IOCTL_RPMB); + + switch (mq_rq->drv_op) { + case MMC_DRV_OP_IOCTL: + if (card->ext_csd.cmdq_en) { + ret = mmc_cmdq_disable(card); + if (ret) + break; + } + fallthrough; + case MMC_DRV_OP_IOCTL_RPMB: + idata = mq_rq->drv_op_data; + for (i = 0, ret = 0; i < mq_rq->ioc_count; i++) { + ret = __mmc_blk_ioctl_cmd(card, md, idata[i]); + if (ret) + break; + } + /* Always switch back to main area after RPMB access */ + if (rpmb_ioctl) + mmc_blk_part_switch(card, 0); + else if (card->reenable_cmdq && !card->ext_csd.cmdq_en) + mmc_cmdq_enable(card); + break; + case MMC_DRV_OP_BOOT_WP: + ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BOOT_WP, + card->ext_csd.boot_ro_lock | + EXT_CSD_BOOT_WP_B_PWR_WP_EN, + card->ext_csd.part_time); + if (ret) + pr_err("%s: Locking boot partition ro until next power on failed: %d\n", + md->disk->disk_name, ret); + else + card->ext_csd.boot_ro_lock |= + EXT_CSD_BOOT_WP_B_PWR_WP_EN; + break; + case MMC_DRV_OP_GET_CARD_STATUS: + ret = mmc_send_status(card, &status); + if (!ret) + ret = status; + break; + case MMC_DRV_OP_GET_EXT_CSD: + ext_csd = mq_rq->drv_op_data; + ret = mmc_get_ext_csd(card, ext_csd); + break; + default: + pr_err("%s: unknown driver specific operation\n", + md->disk->disk_name); + ret = -EINVAL; + break; + } + mq_rq->drv_op_result = ret; + blk_mq_end_request(req, ret ? BLK_STS_IOERR : BLK_STS_OK); +} + +static void mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) +{ + struct mmc_blk_data *md = mq->blkdata; + struct mmc_card *card = md->queue.card; + unsigned int from, nr; + int err = 0, type = MMC_BLK_DISCARD; + blk_status_t status = BLK_STS_OK; + + if (!mmc_can_erase(card)) { + status = BLK_STS_NOTSUPP; + goto fail; + } + + from = blk_rq_pos(req); + nr = blk_rq_sectors(req); + + do { + unsigned int erase_arg = card->erase_arg; + + if (mmc_card_broken_sd_discard(card)) + erase_arg = SD_ERASE_ARG; + + err = 0; + if (card->quirks & MMC_QUIRK_INAND_CMD38) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + INAND_CMD38_ARG_EXT_CSD, + card->erase_arg == MMC_TRIM_ARG ? + INAND_CMD38_ARG_TRIM : + INAND_CMD38_ARG_ERASE, + card->ext_csd.generic_cmd6_time); + } + if (!err) + err = mmc_erase(card, from, nr, erase_arg); + } while (err == -EIO && !mmc_blk_reset(md, card->host, type)); + if (err) + status = BLK_STS_IOERR; + else + mmc_blk_reset_success(md, type); +fail: + blk_mq_end_request(req, status); +} + +static void mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq, + struct request *req) +{ + struct mmc_blk_data *md = mq->blkdata; + struct mmc_card *card = md->queue.card; + unsigned int from, nr, arg; + int err = 0, type = MMC_BLK_SECDISCARD; + blk_status_t status = BLK_STS_OK; + + if (!(mmc_can_secure_erase_trim(card))) { + status = BLK_STS_NOTSUPP; + goto out; + } + + from = blk_rq_pos(req); + nr = blk_rq_sectors(req); + + if (mmc_can_trim(card) && !mmc_erase_group_aligned(card, from, nr)) + arg = MMC_SECURE_TRIM1_ARG; + else + arg = MMC_SECURE_ERASE_ARG; + +retry: + if (card->quirks & MMC_QUIRK_INAND_CMD38) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + INAND_CMD38_ARG_EXT_CSD, + arg == MMC_SECURE_TRIM1_ARG ? + INAND_CMD38_ARG_SECTRIM1 : + INAND_CMD38_ARG_SECERASE, + card->ext_csd.generic_cmd6_time); + if (err) + goto out_retry; + } + + err = mmc_erase(card, from, nr, arg); + if (err == -EIO) + goto out_retry; + if (err) { + status = BLK_STS_IOERR; + goto out; + } + + if (arg == MMC_SECURE_TRIM1_ARG) { + if (card->quirks & MMC_QUIRK_INAND_CMD38) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + INAND_CMD38_ARG_EXT_CSD, + INAND_CMD38_ARG_SECTRIM2, + card->ext_csd.generic_cmd6_time); + if (err) + goto out_retry; + } + + err = mmc_erase(card, from, nr, MMC_SECURE_TRIM2_ARG); + if (err == -EIO) + goto out_retry; + if (err) { + status = BLK_STS_IOERR; + goto out; + } + } + +out_retry: + if (err && !mmc_blk_reset(md, card->host, type)) + goto retry; + if (!err) + mmc_blk_reset_success(md, type); +out: + blk_mq_end_request(req, status); +} + +static void mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req) +{ + struct mmc_blk_data *md = mq->blkdata; + struct mmc_card *card = md->queue.card; + int ret = 0; + + ret = mmc_flush_cache(card); + blk_mq_end_request(req, ret ? BLK_STS_IOERR : BLK_STS_OK); +} + +/* + * Reformat current write as a reliable write, supporting + * both legacy and the enhanced reliable write MMC cards. + * In each transfer we'll handle only as much as a single + * reliable write can handle, thus finish the request in + * partial completions. + */ +static inline void mmc_apply_rel_rw(struct mmc_blk_request *brq, + struct mmc_card *card, + struct request *req) +{ + if (!(card->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN)) { + /* Legacy mode imposes restrictions on transfers. */ + if (!IS_ALIGNED(blk_rq_pos(req), card->ext_csd.rel_sectors)) + brq->data.blocks = 1; + + if (brq->data.blocks > card->ext_csd.rel_sectors) + brq->data.blocks = card->ext_csd.rel_sectors; + else if (brq->data.blocks < card->ext_csd.rel_sectors) + brq->data.blocks = 1; + } +} + +#define CMD_ERRORS_EXCL_OOR \ + (R1_ADDRESS_ERROR | /* Misaligned address */ \ + R1_BLOCK_LEN_ERROR | /* Transferred block length incorrect */\ + R1_WP_VIOLATION | /* Tried to write to protected block */ \ + R1_CARD_ECC_FAILED | /* Card ECC failed */ \ + R1_CC_ERROR | /* Card controller error */ \ + R1_ERROR) /* General/unknown error */ + +#define CMD_ERRORS \ + (CMD_ERRORS_EXCL_OOR | \ + R1_OUT_OF_RANGE) /* Command argument out of range */ \ + +static void mmc_blk_eval_resp_error(struct mmc_blk_request *brq) +{ + u32 val; + + /* + * Per the SD specification(physical layer version 4.10)[1], + * section 4.3.3, it explicitly states that "When the last + * block of user area is read using CMD18, the host should + * ignore OUT_OF_RANGE error that may occur even the sequence + * is correct". And JESD84-B51 for eMMC also has a similar + * statement on section 6.8.3. + * + * Multiple block read/write could be done by either predefined + * method, namely CMD23, or open-ending mode. For open-ending mode, + * we should ignore the OUT_OF_RANGE error as it's normal behaviour. + * + * However the spec[1] doesn't tell us whether we should also + * ignore that for predefined method. But per the spec[1], section + * 4.15 Set Block Count Command, it says"If illegal block count + * is set, out of range error will be indicated during read/write + * operation (For example, data transfer is stopped at user area + * boundary)." In another word, we could expect a out of range error + * in the response for the following CMD18/25. And if argument of + * CMD23 + the argument of CMD18/25 exceed the max number of blocks, + * we could also expect to get a -ETIMEDOUT or any error number from + * the host drivers due to missing data response(for write)/data(for + * read), as the cards will stop the data transfer by itself per the + * spec. So we only need to check R1_OUT_OF_RANGE for open-ending mode. + */ + + if (!brq->stop.error) { + bool oor_with_open_end; + /* If there is no error yet, check R1 response */ + + val = brq->stop.resp[0] & CMD_ERRORS; + oor_with_open_end = val & R1_OUT_OF_RANGE && !brq->mrq.sbc; + + if (val && !oor_with_open_end) + brq->stop.error = -EIO; + } +} + +static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq, + int recovery_mode, bool *do_rel_wr_p, + bool *do_data_tag_p) +{ + struct mmc_blk_data *md = mq->blkdata; + struct mmc_card *card = md->queue.card; + struct mmc_blk_request *brq = &mqrq->brq; + struct request *req = mmc_queue_req_to_req(mqrq); + bool do_rel_wr, do_data_tag; + + /* + * Reliable writes are used to implement Forced Unit Access and + * are supported only on MMCs. + */ + do_rel_wr = (req->cmd_flags & REQ_FUA) && + rq_data_dir(req) == WRITE && + (md->flags & MMC_BLK_REL_WR); + + memset(brq, 0, sizeof(struct mmc_blk_request)); + + brq->mrq.data = &brq->data; + brq->mrq.tag = req->tag; + + brq->stop.opcode = MMC_STOP_TRANSMISSION; + brq->stop.arg = 0; + + if (rq_data_dir(req) == READ) { + brq->data.flags = MMC_DATA_READ; + brq->stop.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + } else { + brq->data.flags = MMC_DATA_WRITE; + brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; + } + + brq->data.blksz = 512; + brq->data.blocks = blk_rq_sectors(req); + brq->data.blk_addr = blk_rq_pos(req); + + /* + * The command queue supports 2 priorities: "high" (1) and "simple" (0). + * The eMMC will give "high" priority tasks priority over "simple" + * priority tasks. Here we always set "simple" priority by not setting + * MMC_DATA_PRIO. + */ + + /* + * The block layer doesn't support all sector count + * restrictions, so we need to be prepared for too big + * requests. + */ + if (brq->data.blocks > card->host->max_blk_count) + brq->data.blocks = card->host->max_blk_count; + + if (brq->data.blocks > 1) { + /* + * Some SD cards in SPI mode return a CRC error or even lock up + * completely when trying to read the last block using a + * multiblock read command. + */ + if (mmc_host_is_spi(card->host) && (rq_data_dir(req) == READ) && + (blk_rq_pos(req) + blk_rq_sectors(req) == + get_capacity(md->disk))) + brq->data.blocks--; + + /* + * After a read error, we redo the request one (native) sector + * at a time in order to accurately determine which + * sectors can be read successfully. + */ + if (recovery_mode) + brq->data.blocks = queue_physical_block_size(mq->queue) >> 9; + + /* + * Some controllers have HW issues while operating + * in multiple I/O mode + */ + if (card->host->ops->multi_io_quirk) + brq->data.blocks = card->host->ops->multi_io_quirk(card, + (rq_data_dir(req) == READ) ? + MMC_DATA_READ : MMC_DATA_WRITE, + brq->data.blocks); + } + + if (do_rel_wr) { + mmc_apply_rel_rw(brq, card, req); + brq->data.flags |= MMC_DATA_REL_WR; + } + + /* + * Data tag is used only during writing meta data to speed + * up write and any subsequent read of this meta data + */ + do_data_tag = card->ext_csd.data_tag_unit_size && + (req->cmd_flags & REQ_META) && + (rq_data_dir(req) == WRITE) && + ((brq->data.blocks * brq->data.blksz) >= + card->ext_csd.data_tag_unit_size); + + if (do_data_tag) + brq->data.flags |= MMC_DATA_DAT_TAG; + + mmc_set_data_timeout(&brq->data, card); + + brq->data.sg = mqrq->sg; + brq->data.sg_len = mmc_queue_map_sg(mq, mqrq); + + /* + * Adjust the sg list so it is the same size as the + * request. + */ + if (brq->data.blocks != blk_rq_sectors(req)) { + int i, data_size = brq->data.blocks << 9; + struct scatterlist *sg; + + for_each_sg(brq->data.sg, sg, brq->data.sg_len, i) { + data_size -= sg->length; + if (data_size <= 0) { + sg->length += data_size; + i++; + break; + } + } + brq->data.sg_len = i; + } + + if (do_rel_wr_p) + *do_rel_wr_p = do_rel_wr; + + if (do_data_tag_p) + *do_data_tag_p = do_data_tag; +} + +#define MMC_CQE_RETRIES 2 + +static void mmc_blk_cqe_complete_rq(struct mmc_queue *mq, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_request *mrq = &mqrq->brq.mrq; + struct request_queue *q = req->q; + struct mmc_host *host = mq->card->host; + enum mmc_issue_type issue_type = mmc_issue_type(mq, req); + unsigned long flags; + bool put_card; + int err; + + mmc_cqe_post_req(host, mrq); + + if (mrq->cmd && mrq->cmd->error) + err = mrq->cmd->error; + else if (mrq->data && mrq->data->error) + err = mrq->data->error; + else + err = 0; + + if (err) { + if (mqrq->retries++ < MMC_CQE_RETRIES) + blk_mq_requeue_request(req, true); + else + blk_mq_end_request(req, BLK_STS_IOERR); + } else if (mrq->data) { + if (blk_update_request(req, BLK_STS_OK, mrq->data->bytes_xfered)) + blk_mq_requeue_request(req, true); + else + __blk_mq_end_request(req, BLK_STS_OK); + } else if (mq->in_recovery) { + blk_mq_requeue_request(req, true); + } else { + blk_mq_end_request(req, BLK_STS_OK); + } + + spin_lock_irqsave(&mq->lock, flags); + + mq->in_flight[issue_type] -= 1; + + put_card = (mmc_tot_in_flight(mq) == 0); + + mmc_cqe_check_busy(mq); + + spin_unlock_irqrestore(&mq->lock, flags); + + if (!mq->cqe_busy) + blk_mq_run_hw_queues(q, true); + + if (put_card) + mmc_put_card(mq->card, &mq->ctx); +} + +void mmc_blk_cqe_recovery(struct mmc_queue *mq) +{ + struct mmc_card *card = mq->card; + struct mmc_host *host = card->host; + int err; + + pr_debug("%s: CQE recovery start\n", mmc_hostname(host)); + + err = mmc_cqe_recovery(host); + if (err) + mmc_blk_reset(mq->blkdata, host, MMC_BLK_CQE_RECOVERY); + mmc_blk_reset_success(mq->blkdata, MMC_BLK_CQE_RECOVERY); + + pr_debug("%s: CQE recovery done\n", mmc_hostname(host)); +} + +static void mmc_blk_cqe_req_done(struct mmc_request *mrq) +{ + struct mmc_queue_req *mqrq = container_of(mrq, struct mmc_queue_req, + brq.mrq); + struct request *req = mmc_queue_req_to_req(mqrq); + struct request_queue *q = req->q; + struct mmc_queue *mq = q->queuedata; + + /* + * Block layer timeouts race with completions which means the normal + * completion path cannot be used during recovery. + */ + if (mq->in_recovery) + mmc_blk_cqe_complete_rq(mq, req); + else if (likely(!blk_should_fake_timeout(req->q))) + blk_mq_complete_request(req); +} + +static int mmc_blk_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq) +{ + mrq->done = mmc_blk_cqe_req_done; + mrq->recovery_notifier = mmc_cqe_recovery_notifier; + + return mmc_cqe_start_req(host, mrq); +} + +static struct mmc_request *mmc_blk_cqe_prep_dcmd(struct mmc_queue_req *mqrq, + struct request *req) +{ + struct mmc_blk_request *brq = &mqrq->brq; + + memset(brq, 0, sizeof(*brq)); + + brq->mrq.cmd = &brq->cmd; + brq->mrq.tag = req->tag; + + return &brq->mrq; +} + +static int mmc_blk_cqe_issue_flush(struct mmc_queue *mq, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_request *mrq = mmc_blk_cqe_prep_dcmd(mqrq, req); + + mrq->cmd->opcode = MMC_SWITCH; + mrq->cmd->arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | + (EXT_CSD_FLUSH_CACHE << 16) | + (1 << 8) | + EXT_CSD_CMD_SET_NORMAL; + mrq->cmd->flags = MMC_CMD_AC | MMC_RSP_R1B; + + return mmc_blk_cqe_start_req(mq->card->host, mrq); +} + +static int mmc_blk_hsq_issue_rw_rq(struct mmc_queue *mq, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_host *host = mq->card->host; + int err; + + mmc_blk_rw_rq_prep(mqrq, mq->card, 0, mq); + mqrq->brq.mrq.done = mmc_blk_hsq_req_done; + mmc_pre_req(host, &mqrq->brq.mrq); + + err = mmc_cqe_start_req(host, &mqrq->brq.mrq); + if (err) + mmc_post_req(host, &mqrq->brq.mrq, err); + + return err; +} + +static int mmc_blk_cqe_issue_rw_rq(struct mmc_queue *mq, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_host *host = mq->card->host; + + if (host->hsq_enabled) + return mmc_blk_hsq_issue_rw_rq(mq, req); + + mmc_blk_data_prep(mq, mqrq, 0, NULL, NULL); + + return mmc_blk_cqe_start_req(mq->card->host, &mqrq->brq.mrq); +} + +static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, + struct mmc_card *card, + int recovery_mode, + struct mmc_queue *mq) +{ + u32 readcmd, writecmd; + struct mmc_blk_request *brq = &mqrq->brq; + struct request *req = mmc_queue_req_to_req(mqrq); + struct mmc_blk_data *md = mq->blkdata; + bool do_rel_wr, do_data_tag; + + mmc_blk_data_prep(mq, mqrq, recovery_mode, &do_rel_wr, &do_data_tag); + + brq->mrq.cmd = &brq->cmd; + + brq->cmd.arg = blk_rq_pos(req); + if (!mmc_card_blockaddr(card)) + brq->cmd.arg <<= 9; + brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; + + if (brq->data.blocks > 1 || do_rel_wr) { + /* SPI multiblock writes terminate using a special + * token, not a STOP_TRANSMISSION request. + */ + if (!mmc_host_is_spi(card->host) || + rq_data_dir(req) == READ) + brq->mrq.stop = &brq->stop; + readcmd = MMC_READ_MULTIPLE_BLOCK; + writecmd = MMC_WRITE_MULTIPLE_BLOCK; + } else { + brq->mrq.stop = NULL; + readcmd = MMC_READ_SINGLE_BLOCK; + writecmd = MMC_WRITE_BLOCK; + } + brq->cmd.opcode = rq_data_dir(req) == READ ? readcmd : writecmd; + + /* + * Pre-defined multi-block transfers are preferable to + * open ended-ones (and necessary for reliable writes). + * However, it is not sufficient to just send CMD23, + * and avoid the final CMD12, as on an error condition + * CMD12 (stop) needs to be sent anyway. This, coupled + * with Auto-CMD23 enhancements provided by some + * hosts, means that the complexity of dealing + * with this is best left to the host. If CMD23 is + * supported by card and host, we'll fill sbc in and let + * the host deal with handling it correctly. This means + * that for hosts that don't expose MMC_CAP_CMD23, no + * change of behavior will be observed. + * + * N.B: Some MMC cards experience perf degradation. + * We'll avoid using CMD23-bounded multiblock writes for + * these, while retaining features like reliable writes. + */ + if ((md->flags & MMC_BLK_CMD23) && mmc_op_multi(brq->cmd.opcode) && + (do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23) || + do_data_tag)) { + brq->sbc.opcode = MMC_SET_BLOCK_COUNT; + brq->sbc.arg = brq->data.blocks | + (do_rel_wr ? (1 << 31) : 0) | + (do_data_tag ? (1 << 29) : 0); + brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC; + brq->mrq.sbc = &brq->sbc; + } +} + +#define MMC_MAX_RETRIES 5 +#define MMC_DATA_RETRIES 2 +#define MMC_NO_RETRIES (MMC_MAX_RETRIES + 1) + +static int mmc_blk_send_stop(struct mmc_card *card, unsigned int timeout) +{ + struct mmc_command cmd = { + .opcode = MMC_STOP_TRANSMISSION, + .flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC, + /* Some hosts wait for busy anyway, so provide a busy timeout */ + .busy_timeout = timeout, + }; + + return mmc_wait_for_cmd(card->host, &cmd, 5); +} + +static int mmc_blk_fix_state(struct mmc_card *card, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_blk_request *brq = &mqrq->brq; + unsigned int timeout = mmc_blk_data_timeout_ms(card->host, &brq->data); + int err; + + mmc_retune_hold_now(card->host); + + mmc_blk_send_stop(card, timeout); + + err = card_busy_detect(card, timeout, NULL); + + mmc_retune_release(card->host); + + return err; +} + +#define MMC_READ_SINGLE_RETRIES 2 + +/* Single (native) sector read during recovery */ +static void mmc_blk_read_single(struct mmc_queue *mq, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_request *mrq = &mqrq->brq.mrq; + struct mmc_card *card = mq->card; + struct mmc_host *host = card->host; + blk_status_t error = BLK_STS_OK; + size_t bytes_per_read = queue_physical_block_size(mq->queue); + + do { + u32 status; + int err; + int retries = 0; + + while (retries++ <= MMC_READ_SINGLE_RETRIES) { + mmc_blk_rw_rq_prep(mqrq, card, 1, mq); + + mmc_wait_for_req(host, mrq); + + err = mmc_send_status(card, &status); + if (err) + goto error_exit; + + if (!mmc_host_is_spi(host) && + !mmc_ready_for_data(status)) { + err = mmc_blk_fix_state(card, req); + if (err) + goto error_exit; + } + + if (!mrq->cmd->error) + break; + } + + if (mrq->cmd->error || + mrq->data->error || + (!mmc_host_is_spi(host) && + (mrq->cmd->resp[0] & CMD_ERRORS || status & CMD_ERRORS))) + error = BLK_STS_IOERR; + else + error = BLK_STS_OK; + + } while (blk_update_request(req, error, bytes_per_read)); + + return; + +error_exit: + mrq->data->bytes_xfered = 0; + blk_update_request(req, BLK_STS_IOERR, bytes_per_read); + /* Let it try the remaining request again */ + if (mqrq->retries > MMC_MAX_RETRIES - 1) + mqrq->retries = MMC_MAX_RETRIES - 1; +} + +static inline bool mmc_blk_oor_valid(struct mmc_blk_request *brq) +{ + return !!brq->mrq.sbc; +} + +static inline u32 mmc_blk_stop_err_bits(struct mmc_blk_request *brq) +{ + return mmc_blk_oor_valid(brq) ? CMD_ERRORS : CMD_ERRORS_EXCL_OOR; +} + +/* + * Check for errors the host controller driver might not have seen such as + * response mode errors or invalid card state. + */ +static bool mmc_blk_status_error(struct request *req, u32 status) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_blk_request *brq = &mqrq->brq; + struct mmc_queue *mq = req->q->queuedata; + u32 stop_err_bits; + + if (mmc_host_is_spi(mq->card->host)) + return false; + + stop_err_bits = mmc_blk_stop_err_bits(brq); + + return brq->cmd.resp[0] & CMD_ERRORS || + brq->stop.resp[0] & stop_err_bits || + status & stop_err_bits || + (rq_data_dir(req) == WRITE && !mmc_ready_for_data(status)); +} + +static inline bool mmc_blk_cmd_started(struct mmc_blk_request *brq) +{ + return !brq->sbc.error && !brq->cmd.error && + !(brq->cmd.resp[0] & CMD_ERRORS); +} + +/* + * Requests are completed by mmc_blk_mq_complete_rq() which sets simple + * policy: + * 1. A request that has transferred at least some data is considered + * successful and will be requeued if there is remaining data to + * transfer. + * 2. Otherwise the number of retries is incremented and the request + * will be requeued if there are remaining retries. + * 3. Otherwise the request will be errored out. + * That means mmc_blk_mq_complete_rq() is controlled by bytes_xfered and + * mqrq->retries. So there are only 4 possible actions here: + * 1. do not accept the bytes_xfered value i.e. set it to zero + * 2. change mqrq->retries to determine the number of retries + * 3. try to reset the card + * 4. read one sector at a time + */ +static void mmc_blk_mq_rw_recovery(struct mmc_queue *mq, struct request *req) +{ + int type = rq_data_dir(req) == READ ? MMC_BLK_READ : MMC_BLK_WRITE; + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_blk_request *brq = &mqrq->brq; + struct mmc_blk_data *md = mq->blkdata; + struct mmc_card *card = mq->card; + u32 status; + u32 blocks; + int err; + + /* + * Some errors the host driver might not have seen. Set the number of + * bytes transferred to zero in that case. + */ + err = __mmc_send_status(card, &status, 0); + if (err || mmc_blk_status_error(req, status)) + brq->data.bytes_xfered = 0; + + mmc_retune_release(card->host); + + /* + * Try again to get the status. This also provides an opportunity for + * re-tuning. + */ + if (err) + err = __mmc_send_status(card, &status, 0); + + /* + * Nothing more to do after the number of bytes transferred has been + * updated and there is no card. + */ + if (err && mmc_detect_card_removed(card->host)) + return; + + /* Try to get back to "tran" state */ + if (!mmc_host_is_spi(mq->card->host) && + (err || !mmc_ready_for_data(status))) + err = mmc_blk_fix_state(mq->card, req); + + /* + * Special case for SD cards where the card might record the number of + * blocks written. + */ + if (!err && mmc_blk_cmd_started(brq) && mmc_card_sd(card) && + rq_data_dir(req) == WRITE) { + if (mmc_sd_num_wr_blocks(card, &blocks)) + brq->data.bytes_xfered = 0; + else + brq->data.bytes_xfered = blocks << 9; + } + + /* Reset if the card is in a bad state */ + if (!mmc_host_is_spi(mq->card->host) && + err && mmc_blk_reset(md, card->host, type)) { + pr_err("%s: recovery failed!\n", req->rq_disk->disk_name); + mqrq->retries = MMC_NO_RETRIES; + return; + } + + /* + * If anything was done, just return and if there is anything remaining + * on the request it will get requeued. + */ + if (brq->data.bytes_xfered) + return; + + /* Reset before last retry */ + if (mqrq->retries + 1 == MMC_MAX_RETRIES) + mmc_blk_reset(md, card->host, type); + + /* Command errors fail fast, so use all MMC_MAX_RETRIES */ + if (brq->sbc.error || brq->cmd.error) + return; + + /* Reduce the remaining retries for data errors */ + if (mqrq->retries < MMC_MAX_RETRIES - MMC_DATA_RETRIES) { + mqrq->retries = MMC_MAX_RETRIES - MMC_DATA_RETRIES; + return; + } + + if (rq_data_dir(req) == READ && brq->data.blocks > + queue_physical_block_size(mq->queue) >> 9) { + /* Read one (native) sector at a time */ + mmc_blk_read_single(mq, req); + return; + } +} + +static inline bool mmc_blk_rq_error(struct mmc_blk_request *brq) +{ + mmc_blk_eval_resp_error(brq); + + return brq->sbc.error || brq->cmd.error || brq->stop.error || + brq->data.error || brq->cmd.resp[0] & CMD_ERRORS; +} + +static int mmc_blk_card_busy(struct mmc_card *card, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + u32 status = 0; + int err; + + if (mmc_host_is_spi(card->host) || rq_data_dir(req) == READ) + return 0; + + err = card_busy_detect(card, MMC_BLK_TIMEOUT_MS, &status); + + /* + * Do not assume data transferred correctly if there are any error bits + * set. + */ + if (status & mmc_blk_stop_err_bits(&mqrq->brq)) { + mqrq->brq.data.bytes_xfered = 0; + err = err ? err : -EIO; + } + + /* Copy the exception bit so it will be seen later on */ + if (mmc_card_mmc(card) && status & R1_EXCEPTION_EVENT) + mqrq->brq.cmd.resp[0] |= R1_EXCEPTION_EVENT; + + return err; +} + +static inline void mmc_blk_rw_reset_success(struct mmc_queue *mq, + struct request *req) +{ + int type = rq_data_dir(req) == READ ? MMC_BLK_READ : MMC_BLK_WRITE; + + mmc_blk_reset_success(mq->blkdata, type); +} + +static void mmc_blk_mq_complete_rq(struct mmc_queue *mq, struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + unsigned int nr_bytes = mqrq->brq.data.bytes_xfered; + + if (nr_bytes) { + if (blk_update_request(req, BLK_STS_OK, nr_bytes)) + blk_mq_requeue_request(req, true); + else + __blk_mq_end_request(req, BLK_STS_OK); + } else if (!blk_rq_bytes(req)) { + __blk_mq_end_request(req, BLK_STS_IOERR); + } else if (mqrq->retries++ < MMC_MAX_RETRIES) { + blk_mq_requeue_request(req, true); + } else { + if (mmc_card_removed(mq->card)) + req->rq_flags |= RQF_QUIET; + blk_mq_end_request(req, BLK_STS_IOERR); + } +} + +static bool mmc_blk_urgent_bkops_needed(struct mmc_queue *mq, + struct mmc_queue_req *mqrq) +{ + return mmc_card_mmc(mq->card) && !mmc_host_is_spi(mq->card->host) && + (mqrq->brq.cmd.resp[0] & R1_EXCEPTION_EVENT || + mqrq->brq.stop.resp[0] & R1_EXCEPTION_EVENT); +} + +static void mmc_blk_urgent_bkops(struct mmc_queue *mq, + struct mmc_queue_req *mqrq) +{ + if (mmc_blk_urgent_bkops_needed(mq, mqrq)) + mmc_run_bkops(mq->card); +} + +static void mmc_blk_hsq_req_done(struct mmc_request *mrq) +{ + struct mmc_queue_req *mqrq = + container_of(mrq, struct mmc_queue_req, brq.mrq); + struct request *req = mmc_queue_req_to_req(mqrq); + struct request_queue *q = req->q; + struct mmc_queue *mq = q->queuedata; + struct mmc_host *host = mq->card->host; + unsigned long flags; + + if (mmc_blk_rq_error(&mqrq->brq) || + mmc_blk_urgent_bkops_needed(mq, mqrq)) { + spin_lock_irqsave(&mq->lock, flags); + mq->recovery_needed = true; + mq->recovery_req = req; + spin_unlock_irqrestore(&mq->lock, flags); + + host->cqe_ops->cqe_recovery_start(host); + + schedule_work(&mq->recovery_work); + return; + } + + mmc_blk_rw_reset_success(mq, req); + + /* + * Block layer timeouts race with completions which means the normal + * completion path cannot be used during recovery. + */ + if (mq->in_recovery) + mmc_blk_cqe_complete_rq(mq, req); + else if (likely(!blk_should_fake_timeout(req->q))) + blk_mq_complete_request(req); +} + +void mmc_blk_mq_complete(struct request *req) +{ + struct mmc_queue *mq = req->q->queuedata; + + if (mq->use_cqe) + mmc_blk_cqe_complete_rq(mq, req); + else if (likely(!blk_should_fake_timeout(req->q))) + mmc_blk_mq_complete_rq(mq, req); +} + +static void mmc_blk_mq_poll_completion(struct mmc_queue *mq, + struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_host *host = mq->card->host; + + if (mmc_blk_rq_error(&mqrq->brq) || + mmc_blk_card_busy(mq->card, req)) { + mmc_blk_mq_rw_recovery(mq, req); + } else { + mmc_blk_rw_reset_success(mq, req); + mmc_retune_release(host); + } + + mmc_blk_urgent_bkops(mq, mqrq); +} + +static void mmc_blk_mq_dec_in_flight(struct mmc_queue *mq, enum mmc_issue_type issue_type) +{ + unsigned long flags; + bool put_card; + + spin_lock_irqsave(&mq->lock, flags); + + mq->in_flight[issue_type] -= 1; + + put_card = (mmc_tot_in_flight(mq) == 0); + + spin_unlock_irqrestore(&mq->lock, flags); + + if (put_card) + mmc_put_card(mq->card, &mq->ctx); +} + +static void mmc_blk_mq_post_req(struct mmc_queue *mq, struct request *req) +{ + enum mmc_issue_type issue_type = mmc_issue_type(mq, req); + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_request *mrq = &mqrq->brq.mrq; + struct mmc_host *host = mq->card->host; + + mmc_post_req(host, mrq, 0); + + /* + * Block layer timeouts race with completions which means the normal + * completion path cannot be used during recovery. + */ + if (mq->in_recovery) + mmc_blk_mq_complete_rq(mq, req); + else if (likely(!blk_should_fake_timeout(req->q))) + blk_mq_complete_request(req); + + mmc_blk_mq_dec_in_flight(mq, issue_type); +} + +void mmc_blk_mq_recovery(struct mmc_queue *mq) +{ + struct request *req = mq->recovery_req; + struct mmc_host *host = mq->card->host; + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + + mq->recovery_req = NULL; + mq->rw_wait = false; + + if (mmc_blk_rq_error(&mqrq->brq)) { + mmc_retune_hold_now(host); + mmc_blk_mq_rw_recovery(mq, req); + } + + mmc_blk_urgent_bkops(mq, mqrq); + + mmc_blk_mq_post_req(mq, req); +} + +static void mmc_blk_mq_complete_prev_req(struct mmc_queue *mq, + struct request **prev_req) +{ + if (mmc_host_done_complete(mq->card->host)) + return; + + mutex_lock(&mq->complete_lock); + + if (!mq->complete_req) + goto out_unlock; + + mmc_blk_mq_poll_completion(mq, mq->complete_req); + + if (prev_req) + *prev_req = mq->complete_req; + else + mmc_blk_mq_post_req(mq, mq->complete_req); + + mq->complete_req = NULL; + +out_unlock: + mutex_unlock(&mq->complete_lock); +} + +void mmc_blk_mq_complete_work(struct work_struct *work) +{ + struct mmc_queue *mq = container_of(work, struct mmc_queue, + complete_work); + + mmc_blk_mq_complete_prev_req(mq, NULL); +} + +static void mmc_blk_mq_req_done(struct mmc_request *mrq) +{ + struct mmc_queue_req *mqrq = container_of(mrq, struct mmc_queue_req, + brq.mrq); + struct request *req = mmc_queue_req_to_req(mqrq); + struct request_queue *q = req->q; + struct mmc_queue *mq = q->queuedata; + struct mmc_host *host = mq->card->host; + unsigned long flags; + + if (!mmc_host_done_complete(host)) { + bool waiting; + + /* + * We cannot complete the request in this context, so record + * that there is a request to complete, and that a following + * request does not need to wait (although it does need to + * complete complete_req first). + */ + spin_lock_irqsave(&mq->lock, flags); + mq->complete_req = req; + mq->rw_wait = false; + waiting = mq->waiting; + spin_unlock_irqrestore(&mq->lock, flags); + + /* + * If 'waiting' then the waiting task will complete this + * request, otherwise queue a work to do it. Note that + * complete_work may still race with the dispatch of a following + * request. + */ + if (waiting) + wake_up(&mq->wait); + else + queue_work(mq->card->complete_wq, &mq->complete_work); + + return; + } + + /* Take the recovery path for errors or urgent background operations */ + if (mmc_blk_rq_error(&mqrq->brq) || + mmc_blk_urgent_bkops_needed(mq, mqrq)) { + spin_lock_irqsave(&mq->lock, flags); + mq->recovery_needed = true; + mq->recovery_req = req; + spin_unlock_irqrestore(&mq->lock, flags); + wake_up(&mq->wait); + schedule_work(&mq->recovery_work); + return; + } + + mmc_blk_rw_reset_success(mq, req); + + mq->rw_wait = false; + wake_up(&mq->wait); + + mmc_blk_mq_post_req(mq, req); +} + +static bool mmc_blk_rw_wait_cond(struct mmc_queue *mq, int *err) +{ + unsigned long flags; + bool done; + + /* + * Wait while there is another request in progress, but not if recovery + * is needed. Also indicate whether there is a request waiting to start. + */ + spin_lock_irqsave(&mq->lock, flags); + if (mq->recovery_needed) { + *err = -EBUSY; + done = true; + } else { + done = !mq->rw_wait; + } + mq->waiting = !done; + spin_unlock_irqrestore(&mq->lock, flags); + + return done; +} + +static int mmc_blk_rw_wait(struct mmc_queue *mq, struct request **prev_req) +{ + int err = 0; + + wait_event(mq->wait, mmc_blk_rw_wait_cond(mq, &err)); + + /* Always complete the previous request if there is one */ + mmc_blk_mq_complete_prev_req(mq, prev_req); + + return err; +} + +static int mmc_blk_mq_issue_rw_rq(struct mmc_queue *mq, + struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_host *host = mq->card->host; + struct request *prev_req = NULL; + int err = 0; + + mmc_blk_rw_rq_prep(mqrq, mq->card, 0, mq); + + mqrq->brq.mrq.done = mmc_blk_mq_req_done; + + mmc_pre_req(host, &mqrq->brq.mrq); + + err = mmc_blk_rw_wait(mq, &prev_req); + if (err) + goto out_post_req; + + mq->rw_wait = true; + + err = mmc_start_request(host, &mqrq->brq.mrq); + + if (prev_req) + mmc_blk_mq_post_req(mq, prev_req); + + if (err) + mq->rw_wait = false; + + /* Release re-tuning here where there is no synchronization required */ + if (err || mmc_host_done_complete(host)) + mmc_retune_release(host); + +out_post_req: + if (err) + mmc_post_req(host, &mqrq->brq.mrq, err); + + return err; +} + +static int mmc_blk_wait_for_idle(struct mmc_queue *mq, struct mmc_host *host) +{ + if (mq->use_cqe) + return host->cqe_ops->cqe_wait_for_idle(host); + + return mmc_blk_rw_wait(mq, NULL); +} + +enum mmc_issued mmc_blk_mq_issue_rq(struct mmc_queue *mq, struct request *req) +{ + struct mmc_blk_data *md = mq->blkdata; + struct mmc_card *card = md->queue.card; + struct mmc_host *host = card->host; + int ret; + + ret = mmc_blk_part_switch(card, md->part_type); + if (ret) + return MMC_REQ_FAILED_TO_START; + + switch (mmc_issue_type(mq, req)) { + case MMC_ISSUE_SYNC: + ret = mmc_blk_wait_for_idle(mq, host); + if (ret) + return MMC_REQ_BUSY; + switch (req_op(req)) { + case REQ_OP_DRV_IN: + case REQ_OP_DRV_OUT: + mmc_blk_issue_drv_op(mq, req); + break; + case REQ_OP_DISCARD: + mmc_blk_issue_discard_rq(mq, req); + break; + case REQ_OP_SECURE_ERASE: + mmc_blk_issue_secdiscard_rq(mq, req); + break; + case REQ_OP_FLUSH: + mmc_blk_issue_flush(mq, req); + break; + default: + WARN_ON_ONCE(1); + return MMC_REQ_FAILED_TO_START; + } + return MMC_REQ_FINISHED; + case MMC_ISSUE_DCMD: + case MMC_ISSUE_ASYNC: + switch (req_op(req)) { + case REQ_OP_FLUSH: + if (!mmc_cache_enabled(host)) { + blk_mq_end_request(req, BLK_STS_OK); + return MMC_REQ_FINISHED; + } + ret = mmc_blk_cqe_issue_flush(mq, req); + break; + case REQ_OP_READ: + case REQ_OP_WRITE: + if (mq->use_cqe) + ret = mmc_blk_cqe_issue_rw_rq(mq, req); + else + ret = mmc_blk_mq_issue_rw_rq(mq, req); + break; + default: + WARN_ON_ONCE(1); + ret = -EINVAL; + } + if (!ret) + return MMC_REQ_STARTED; + return ret == -EBUSY ? MMC_REQ_BUSY : MMC_REQ_FAILED_TO_START; + default: + WARN_ON_ONCE(1); + return MMC_REQ_FAILED_TO_START; + } +} + +static inline int mmc_blk_readonly(struct mmc_card *card) +{ + return mmc_card_readonly(card) || + !(card->csd.cmdclass & CCC_BLOCK_WRITE); +} + +static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card, + struct device *parent, + sector_t size, + bool default_ro, + const char *subname, + int area_type) +{ + struct mmc_blk_data *md; + int devidx, ret; + + devidx = ida_simple_get(&mmc_blk_ida, 0, max_devices, GFP_KERNEL); + if (devidx < 0) { + /* + * We get -ENOSPC because there are no more any available + * devidx. The reason may be that, either userspace haven't yet + * unmounted the partitions, which postpones mmc_blk_release() + * from being called, or the device has more partitions than + * what we support. + */ + if (devidx == -ENOSPC) + dev_err(mmc_dev(card->host), + "no more device IDs available\n"); + + return ERR_PTR(devidx); + } + + md = kzalloc(sizeof(struct mmc_blk_data), GFP_KERNEL); + if (!md) { + ret = -ENOMEM; + goto out; + } + + md->area_type = area_type; + + /* + * Set the read-only status based on the supported commands + * and the write protect switch. + */ + md->read_only = mmc_blk_readonly(card); + + md->disk = alloc_disk(perdev_minors); + if (md->disk == NULL) { + ret = -ENOMEM; + goto err_kfree; + } + + INIT_LIST_HEAD(&md->part); + INIT_LIST_HEAD(&md->rpmbs); + md->usage = 1; + + ret = mmc_init_queue(&md->queue, card); + if (ret) + goto err_putdisk; + + md->queue.blkdata = md; + + /* + * Keep an extra reference to the queue so that we can shutdown the + * queue (i.e. call blk_cleanup_queue()) while there are still + * references to the 'md'. The corresponding blk_put_queue() is in + * mmc_blk_put(). + */ + if (!blk_get_queue(md->queue.queue)) { + mmc_cleanup_queue(&md->queue); + ret = -ENODEV; + goto err_putdisk; + } + + md->disk->major = MMC_BLOCK_MAJOR; + md->disk->first_minor = devidx * perdev_minors; + md->disk->fops = &mmc_bdops; + md->disk->private_data = md; + md->disk->queue = md->queue.queue; + md->parent = parent; + set_disk_ro(md->disk, md->read_only || default_ro); + md->disk->flags = GENHD_FL_EXT_DEVT; + if (area_type & (MMC_BLK_DATA_AREA_RPMB | MMC_BLK_DATA_AREA_BOOT)) + md->disk->flags |= GENHD_FL_NO_PART_SCAN + | GENHD_FL_SUPPRESS_PARTITION_INFO; + + /* + * As discussed on lkml, GENHD_FL_REMOVABLE should: + * + * - be set for removable media with permanent block devices + * - be unset for removable block devices with permanent media + * + * Since MMC block devices clearly fall under the second + * case, we do not set GENHD_FL_REMOVABLE. Userspace + * should use the block device creation/destruction hotplug + * messages to tell when the card is present. + */ + + snprintf(md->disk->disk_name, sizeof(md->disk->disk_name), + "mmcblk%u%s", card->host->index, subname ? subname : ""); + + set_capacity(md->disk, size); + + if (mmc_host_cmd23(card->host)) { + if ((mmc_card_mmc(card) && + card->csd.mmca_vsn >= CSD_SPEC_VER_3) || + (mmc_card_sd(card) && + card->scr.cmds & SD_SCR_CMD23_SUPPORT)) + md->flags |= MMC_BLK_CMD23; + } + + if (mmc_card_mmc(card) && + md->flags & MMC_BLK_CMD23 && + ((card->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN) || + card->ext_csd.rel_sectors)) { + md->flags |= MMC_BLK_REL_WR; + blk_queue_write_cache(md->queue.queue, true, true); + } + + return md; + + err_putdisk: + put_disk(md->disk); + err_kfree: + kfree(md); + out: + ida_simple_remove(&mmc_blk_ida, devidx); + return ERR_PTR(ret); +} + +static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) +{ + sector_t size; + + if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) { + /* + * The EXT_CSD sector count is in number or 512 byte + * sectors. + */ + size = card->ext_csd.sectors; + } else { + /* + * The CSD capacity field is in units of read_blkbits. + * set_capacity takes units of 512 bytes. + */ + size = (typeof(sector_t))card->csd.capacity + << (card->csd.read_blkbits - 9); + } + + return mmc_blk_alloc_req(card, &card->dev, size, false, NULL, + MMC_BLK_DATA_AREA_MAIN); +} + +static int mmc_blk_alloc_part(struct mmc_card *card, + struct mmc_blk_data *md, + unsigned int part_type, + sector_t size, + bool default_ro, + const char *subname, + int area_type) +{ + char cap_str[10]; + struct mmc_blk_data *part_md; + + part_md = mmc_blk_alloc_req(card, disk_to_dev(md->disk), size, default_ro, + subname, area_type); + if (IS_ERR(part_md)) + return PTR_ERR(part_md); + part_md->part_type = part_type; + list_add(&part_md->part, &md->part); + + string_get_size((u64)get_capacity(part_md->disk), 512, STRING_UNITS_2, + cap_str, sizeof(cap_str)); + pr_info("%s: %s %s partition %u %s\n", + part_md->disk->disk_name, mmc_card_id(card), + mmc_card_name(card), part_md->part_type, cap_str); + return 0; +} + +/** + * mmc_rpmb_ioctl() - ioctl handler for the RPMB chardev + * @filp: the character device file + * @cmd: the ioctl() command + * @arg: the argument from userspace + * + * This will essentially just redirect the ioctl()s coming in over to + * the main block device spawning the RPMB character device. + */ +static long mmc_rpmb_ioctl(struct file *filp, unsigned int cmd, + unsigned long arg) +{ + struct mmc_rpmb_data *rpmb = filp->private_data; + int ret; + + switch (cmd) { + case MMC_IOC_CMD: + ret = mmc_blk_ioctl_cmd(rpmb->md, + (struct mmc_ioc_cmd __user *)arg, + rpmb); + break; + case MMC_IOC_MULTI_CMD: + ret = mmc_blk_ioctl_multi_cmd(rpmb->md, + (struct mmc_ioc_multi_cmd __user *)arg, + rpmb); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +#ifdef CONFIG_COMPAT +static long mmc_rpmb_ioctl_compat(struct file *filp, unsigned int cmd, + unsigned long arg) +{ + return mmc_rpmb_ioctl(filp, cmd, (unsigned long)compat_ptr(arg)); +} +#endif + +static int mmc_rpmb_chrdev_open(struct inode *inode, struct file *filp) +{ + struct mmc_rpmb_data *rpmb = container_of(inode->i_cdev, + struct mmc_rpmb_data, chrdev); + + get_device(&rpmb->dev); + filp->private_data = rpmb; + mmc_blk_get(rpmb->md->disk); + + return nonseekable_open(inode, filp); +} + +static int mmc_rpmb_chrdev_release(struct inode *inode, struct file *filp) +{ + struct mmc_rpmb_data *rpmb = container_of(inode->i_cdev, + struct mmc_rpmb_data, chrdev); + + mmc_blk_put(rpmb->md); + put_device(&rpmb->dev); + + return 0; +} + +static const struct file_operations mmc_rpmb_fileops = { + .release = mmc_rpmb_chrdev_release, + .open = mmc_rpmb_chrdev_open, + .owner = THIS_MODULE, + .llseek = no_llseek, + .unlocked_ioctl = mmc_rpmb_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = mmc_rpmb_ioctl_compat, +#endif +}; + +static void mmc_blk_rpmb_device_release(struct device *dev) +{ + struct mmc_rpmb_data *rpmb = dev_get_drvdata(dev); + + ida_simple_remove(&mmc_rpmb_ida, rpmb->id); + kfree(rpmb); +} + +static int mmc_blk_alloc_rpmb_part(struct mmc_card *card, + struct mmc_blk_data *md, + unsigned int part_index, + sector_t size, + const char *subname) +{ + int devidx, ret; + char rpmb_name[DISK_NAME_LEN]; + char cap_str[10]; + struct mmc_rpmb_data *rpmb; + + /* This creates the minor number for the RPMB char device */ + devidx = ida_simple_get(&mmc_rpmb_ida, 0, max_devices, GFP_KERNEL); + if (devidx < 0) + return devidx; + + rpmb = kzalloc(sizeof(*rpmb), GFP_KERNEL); + if (!rpmb) { + ida_simple_remove(&mmc_rpmb_ida, devidx); + return -ENOMEM; + } + + snprintf(rpmb_name, sizeof(rpmb_name), + "mmcblk%u%s", card->host->index, subname ? subname : ""); + + rpmb->id = devidx; + rpmb->part_index = part_index; + rpmb->dev.init_name = rpmb_name; + rpmb->dev.bus = &mmc_rpmb_bus_type; + rpmb->dev.devt = MKDEV(MAJOR(mmc_rpmb_devt), rpmb->id); + rpmb->dev.parent = &card->dev; + rpmb->dev.release = mmc_blk_rpmb_device_release; + device_initialize(&rpmb->dev); + dev_set_drvdata(&rpmb->dev, rpmb); + rpmb->md = md; + + cdev_init(&rpmb->chrdev, &mmc_rpmb_fileops); + rpmb->chrdev.owner = THIS_MODULE; + ret = cdev_device_add(&rpmb->chrdev, &rpmb->dev); + if (ret) { + pr_err("%s: could not add character device\n", rpmb_name); + goto out_put_device; + } + + list_add(&rpmb->node, &md->rpmbs); + + string_get_size((u64)size, 512, STRING_UNITS_2, + cap_str, sizeof(cap_str)); + + pr_info("%s: %s %s partition %u %s, chardev (%d:%d)\n", + rpmb_name, mmc_card_id(card), + mmc_card_name(card), EXT_CSD_PART_CONFIG_ACC_RPMB, cap_str, + MAJOR(mmc_rpmb_devt), rpmb->id); + + return 0; + +out_put_device: + put_device(&rpmb->dev); + return ret; +} + +static void mmc_blk_remove_rpmb_part(struct mmc_rpmb_data *rpmb) + +{ + cdev_device_del(&rpmb->chrdev, &rpmb->dev); + put_device(&rpmb->dev); +} + +/* MMC Physical partitions consist of two boot partitions and + * up to four general purpose partitions. + * For each partition enabled in EXT_CSD a block device will be allocatedi + * to provide access to the partition. + */ + +static int mmc_blk_alloc_parts(struct mmc_card *card, struct mmc_blk_data *md) +{ + int idx, ret; + + if (!mmc_card_mmc(card)) + return 0; + + for (idx = 0; idx < card->nr_parts; idx++) { + if (card->part[idx].area_type & MMC_BLK_DATA_AREA_RPMB) { + /* + * RPMB partitions does not provide block access, they + * are only accessed using ioctl():s. Thus create + * special RPMB block devices that do not have a + * backing block queue for these. + */ + ret = mmc_blk_alloc_rpmb_part(card, md, + card->part[idx].part_cfg, + card->part[idx].size >> 9, + card->part[idx].name); + if (ret) + return ret; + } else if (card->part[idx].size) { + ret = mmc_blk_alloc_part(card, md, + card->part[idx].part_cfg, + card->part[idx].size >> 9, + card->part[idx].force_ro, + card->part[idx].name, + card->part[idx].area_type); + if (ret) + return ret; + } + } + + return 0; +} + +static void mmc_blk_remove_req(struct mmc_blk_data *md) +{ + struct mmc_card *card; + + if (md) { + /* + * Flush remaining requests and free queues. It + * is freeing the queue that stops new requests + * from being accepted. + */ + card = md->queue.card; + if (md->disk->flags & GENHD_FL_UP) { + device_remove_file(disk_to_dev(md->disk), &md->force_ro); + if ((md->area_type & MMC_BLK_DATA_AREA_BOOT) && + card->ext_csd.boot_ro_lockable) + device_remove_file(disk_to_dev(md->disk), + &md->power_ro_lock); + + del_gendisk(md->disk); + } + mmc_cleanup_queue(&md->queue); + mmc_blk_put(md); + } +} + +static void mmc_blk_remove_parts(struct mmc_card *card, + struct mmc_blk_data *md) +{ + struct list_head *pos, *q; + struct mmc_blk_data *part_md; + struct mmc_rpmb_data *rpmb; + + /* Remove RPMB partitions */ + list_for_each_safe(pos, q, &md->rpmbs) { + rpmb = list_entry(pos, struct mmc_rpmb_data, node); + list_del(pos); + mmc_blk_remove_rpmb_part(rpmb); + } + /* Remove block partitions */ + list_for_each_safe(pos, q, &md->part) { + part_md = list_entry(pos, struct mmc_blk_data, part); + list_del(pos); + mmc_blk_remove_req(part_md); + } +} + +static int mmc_add_disk(struct mmc_blk_data *md) +{ + int ret; + struct mmc_card *card = md->queue.card; + + device_add_disk(md->parent, md->disk, NULL); + md->force_ro.show = force_ro_show; + md->force_ro.store = force_ro_store; + sysfs_attr_init(&md->force_ro.attr); + md->force_ro.attr.name = "force_ro"; + md->force_ro.attr.mode = S_IRUGO | S_IWUSR; + ret = device_create_file(disk_to_dev(md->disk), &md->force_ro); + if (ret) + goto force_ro_fail; + + if ((md->area_type & MMC_BLK_DATA_AREA_BOOT) && + card->ext_csd.boot_ro_lockable) { + umode_t mode; + + if (card->ext_csd.boot_ro_lock & EXT_CSD_BOOT_WP_B_PWR_WP_DIS) + mode = S_IRUGO; + else + mode = S_IRUGO | S_IWUSR; + + md->power_ro_lock.show = power_ro_lock_show; + md->power_ro_lock.store = power_ro_lock_store; + sysfs_attr_init(&md->power_ro_lock.attr); + md->power_ro_lock.attr.mode = mode; + md->power_ro_lock.attr.name = + "ro_lock_until_next_power_on"; + ret = device_create_file(disk_to_dev(md->disk), + &md->power_ro_lock); + if (ret) + goto power_ro_lock_fail; + } + return ret; + +power_ro_lock_fail: + device_remove_file(disk_to_dev(md->disk), &md->force_ro); +force_ro_fail: + del_gendisk(md->disk); + + return ret; +} + +#ifdef CONFIG_DEBUG_FS + +static int mmc_dbg_card_status_get(void *data, u64 *val) +{ + struct mmc_card *card = data; + struct mmc_blk_data *md = dev_get_drvdata(&card->dev); + struct mmc_queue *mq = &md->queue; + struct request *req; + int ret; + + /* Ask the block layer about the card status */ + req = blk_get_request(mq->queue, REQ_OP_DRV_IN, 0); + if (IS_ERR(req)) + return PTR_ERR(req); + req_to_mmc_queue_req(req)->drv_op = MMC_DRV_OP_GET_CARD_STATUS; + req_to_mmc_queue_req(req)->drv_op_result = -EIO; + blk_execute_rq(mq->queue, NULL, req, 0); + ret = req_to_mmc_queue_req(req)->drv_op_result; + if (ret >= 0) { + *val = ret; + ret = 0; + } + blk_put_request(req); + + return ret; +} +DEFINE_DEBUGFS_ATTRIBUTE(mmc_dbg_card_status_fops, mmc_dbg_card_status_get, + NULL, "%08llx\n"); + +/* That is two digits * 512 + 1 for newline */ +#define EXT_CSD_STR_LEN 1025 + +static int mmc_ext_csd_open(struct inode *inode, struct file *filp) +{ + struct mmc_card *card = inode->i_private; + struct mmc_blk_data *md = dev_get_drvdata(&card->dev); + struct mmc_queue *mq = &md->queue; + struct request *req; + char *buf; + ssize_t n = 0; + u8 *ext_csd; + int err, i; + + buf = kmalloc(EXT_CSD_STR_LEN + 1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + /* Ask the block layer for the EXT CSD */ + req = blk_get_request(mq->queue, REQ_OP_DRV_IN, 0); + if (IS_ERR(req)) { + err = PTR_ERR(req); + goto out_free; + } + req_to_mmc_queue_req(req)->drv_op = MMC_DRV_OP_GET_EXT_CSD; + req_to_mmc_queue_req(req)->drv_op_result = -EIO; + req_to_mmc_queue_req(req)->drv_op_data = &ext_csd; + blk_execute_rq(mq->queue, NULL, req, 0); + err = req_to_mmc_queue_req(req)->drv_op_result; + blk_put_request(req); + if (err) { + pr_err("FAILED %d\n", err); + goto out_free; + } + + for (i = 0; i < 512; i++) + n += sprintf(buf + n, "%02x", ext_csd[i]); + n += sprintf(buf + n, "\n"); + + if (n != EXT_CSD_STR_LEN) { + err = -EINVAL; + kfree(ext_csd); + goto out_free; + } + + filp->private_data = buf; + kfree(ext_csd); + return 0; + +out_free: + kfree(buf); + return err; +} + +static ssize_t mmc_ext_csd_read(struct file *filp, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + char *buf = filp->private_data; + + return simple_read_from_buffer(ubuf, cnt, ppos, + buf, EXT_CSD_STR_LEN); +} + +static int mmc_ext_csd_release(struct inode *inode, struct file *file) +{ + kfree(file->private_data); + return 0; +} + +static const struct file_operations mmc_dbg_ext_csd_fops = { + .open = mmc_ext_csd_open, + .read = mmc_ext_csd_read, + .release = mmc_ext_csd_release, + .llseek = default_llseek, +}; + +static int mmc_blk_add_debugfs(struct mmc_card *card, struct mmc_blk_data *md) +{ + struct dentry *root; + + if (!card->debugfs_root) + return 0; + + root = card->debugfs_root; + + if (mmc_card_mmc(card) || mmc_card_sd(card)) { + md->status_dentry = + debugfs_create_file_unsafe("status", 0400, root, + card, + &mmc_dbg_card_status_fops); + if (!md->status_dentry) + return -EIO; + } + + if (mmc_card_mmc(card)) { + md->ext_csd_dentry = + debugfs_create_file("ext_csd", S_IRUSR, root, card, + &mmc_dbg_ext_csd_fops); + if (!md->ext_csd_dentry) + return -EIO; + } + + return 0; +} + +static void mmc_blk_remove_debugfs(struct mmc_card *card, + struct mmc_blk_data *md) +{ + if (!card->debugfs_root) + return; + + if (!IS_ERR_OR_NULL(md->status_dentry)) { + debugfs_remove(md->status_dentry); + md->status_dentry = NULL; + } + + if (!IS_ERR_OR_NULL(md->ext_csd_dentry)) { + debugfs_remove(md->ext_csd_dentry); + md->ext_csd_dentry = NULL; + } +} + +#else + +static int mmc_blk_add_debugfs(struct mmc_card *card, struct mmc_blk_data *md) +{ + return 0; +} + +static void mmc_blk_remove_debugfs(struct mmc_card *card, + struct mmc_blk_data *md) +{ +} + +#endif /* CONFIG_DEBUG_FS */ + +static int mmc_blk_probe(struct mmc_card *card) +{ + struct mmc_blk_data *md, *part_md; + char cap_str[10]; + + /* + * Check that the card supports the command class(es) we need. + */ + if (!(card->csd.cmdclass & CCC_BLOCK_READ)) + return -ENODEV; + + mmc_fixup_device(card, mmc_blk_fixups); + + card->complete_wq = alloc_workqueue("mmc_complete", + WQ_MEM_RECLAIM | WQ_HIGHPRI, 0); + if (unlikely(!card->complete_wq)) { + pr_err("Failed to create mmc completion workqueue"); + return -ENOMEM; + } + + md = mmc_blk_alloc(card); + if (IS_ERR(md)) + return PTR_ERR(md); + + string_get_size((u64)get_capacity(md->disk), 512, STRING_UNITS_2, + cap_str, sizeof(cap_str)); + pr_info("%s: %s %s %s %s\n", + md->disk->disk_name, mmc_card_id(card), mmc_card_name(card), + cap_str, md->read_only ? "(ro)" : ""); + + if (mmc_blk_alloc_parts(card, md)) + goto out; + + dev_set_drvdata(&card->dev, md); + + if (mmc_add_disk(md)) + goto out; + + list_for_each_entry(part_md, &md->part, part) { + if (mmc_add_disk(part_md)) + goto out; + } + + /* Add two debugfs entries */ + mmc_blk_add_debugfs(card, md); + + pm_runtime_set_autosuspend_delay(&card->dev, 3000); + pm_runtime_use_autosuspend(&card->dev); + + /* + * Don't enable runtime PM for SD-combo cards here. Leave that + * decision to be taken during the SDIO init sequence instead. + */ + if (card->type != MMC_TYPE_SD_COMBO) { + pm_runtime_set_active(&card->dev); + pm_runtime_enable(&card->dev); + } + + return 0; + + out: + mmc_blk_remove_parts(card, md); + mmc_blk_remove_req(md); + return 0; +} + +static void mmc_blk_remove(struct mmc_card *card) +{ + struct mmc_blk_data *md = dev_get_drvdata(&card->dev); + + mmc_blk_remove_debugfs(card, md); + mmc_blk_remove_parts(card, md); + pm_runtime_get_sync(&card->dev); + if (md->part_curr != md->part_type) { + mmc_claim_host(card->host); + mmc_blk_part_switch(card, md->part_type); + mmc_release_host(card->host); + } + if (card->type != MMC_TYPE_SD_COMBO) + pm_runtime_disable(&card->dev); + pm_runtime_put_noidle(&card->dev); + mmc_blk_remove_req(md); + dev_set_drvdata(&card->dev, NULL); + destroy_workqueue(card->complete_wq); +} + +static int _mmc_blk_suspend(struct mmc_card *card) +{ + struct mmc_blk_data *part_md; + struct mmc_blk_data *md = dev_get_drvdata(&card->dev); + + if (md) { + mmc_queue_suspend(&md->queue); + list_for_each_entry(part_md, &md->part, part) { + mmc_queue_suspend(&part_md->queue); + } + } + return 0; +} + +static void mmc_blk_shutdown(struct mmc_card *card) +{ + _mmc_blk_suspend(card); +} + +#ifdef CONFIG_PM_SLEEP +static int mmc_blk_suspend(struct device *dev) +{ + struct mmc_card *card = mmc_dev_to_card(dev); + + return _mmc_blk_suspend(card); +} + +static int mmc_blk_resume(struct device *dev) +{ + struct mmc_blk_data *part_md; + struct mmc_blk_data *md = dev_get_drvdata(dev); + + if (md) { + /* + * Resume involves the card going into idle state, + * so current partition is always the main one. + */ + md->part_curr = md->part_type; + mmc_queue_resume(&md->queue); + list_for_each_entry(part_md, &md->part, part) { + mmc_queue_resume(&part_md->queue); + } + } + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(mmc_blk_pm_ops, mmc_blk_suspend, mmc_blk_resume); + +static struct mmc_driver mmc_driver = { + .drv = { + .name = "mmcblk", + .pm = &mmc_blk_pm_ops, + }, + .probe = mmc_blk_probe, + .remove = mmc_blk_remove, + .shutdown = mmc_blk_shutdown, +}; + +static int __init mmc_blk_init(void) +{ + int res; + + res = bus_register(&mmc_rpmb_bus_type); + if (res < 0) { + pr_err("mmcblk: could not register RPMB bus type\n"); + return res; + } + res = alloc_chrdev_region(&mmc_rpmb_devt, 0, MAX_DEVICES, "rpmb"); + if (res < 0) { + pr_err("mmcblk: failed to allocate rpmb chrdev region\n"); + goto out_bus_unreg; + } + + if (perdev_minors != CONFIG_MMC_BLOCK_MINORS) + pr_info("mmcblk: using %d minors per device\n", perdev_minors); + + max_devices = min(MAX_DEVICES, (1 << MINORBITS) / perdev_minors); + + res = register_blkdev(MMC_BLOCK_MAJOR, "mmc"); + if (res) + goto out_chrdev_unreg; + + res = mmc_register_driver(&mmc_driver); + if (res) + goto out_blkdev_unreg; + + return 0; + +out_blkdev_unreg: + unregister_blkdev(MMC_BLOCK_MAJOR, "mmc"); +out_chrdev_unreg: + unregister_chrdev_region(mmc_rpmb_devt, MAX_DEVICES); +out_bus_unreg: + bus_unregister(&mmc_rpmb_bus_type); + return res; +} + +static void __exit mmc_blk_exit(void) +{ + mmc_unregister_driver(&mmc_driver); + unregister_blkdev(MMC_BLOCK_MAJOR, "mmc"); + unregister_chrdev_region(mmc_rpmb_devt, MAX_DEVICES); + bus_unregister(&mmc_rpmb_bus_type); +} + +module_init(mmc_blk_init); +module_exit(mmc_blk_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Multimedia Card (MMC) block device driver"); diff --git a/drivers/mmc/core/block.h b/drivers/mmc/core/block.h new file mode 100644 index 000000000..31153f656 --- /dev/null +++ b/drivers/mmc/core/block.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _MMC_CORE_BLOCK_H +#define _MMC_CORE_BLOCK_H + +struct mmc_queue; +struct request; + +void mmc_blk_cqe_recovery(struct mmc_queue *mq); + +enum mmc_issued; + +enum mmc_issued mmc_blk_mq_issue_rq(struct mmc_queue *mq, struct request *req); +void mmc_blk_mq_complete(struct request *req); +void mmc_blk_mq_recovery(struct mmc_queue *mq); + +struct work_struct; + +void mmc_blk_mq_complete_work(struct work_struct *work); + +#endif diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c new file mode 100644 index 000000000..4383c262b --- /dev/null +++ b/drivers/mmc/core/bus.c @@ -0,0 +1,420 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/mmc/core/bus.c + * + * Copyright (C) 2003 Russell King, All Rights Reserved. + * Copyright (C) 2007 Pierre Ossman + * + * MMC card bus driver model + */ + +#include <linux/export.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/stat.h> +#include <linux/of.h> +#include <linux/pm_runtime.h> + +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> + +#include "core.h" +#include "card.h" +#include "host.h" +#include "sdio_cis.h" +#include "bus.h" + +#define to_mmc_driver(d) container_of(d, struct mmc_driver, drv) + +static ssize_t type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct mmc_card *card = mmc_dev_to_card(dev); + + switch (card->type) { + case MMC_TYPE_MMC: + return sprintf(buf, "MMC\n"); + case MMC_TYPE_SD: + return sprintf(buf, "SD\n"); + case MMC_TYPE_SDIO: + return sprintf(buf, "SDIO\n"); + case MMC_TYPE_SD_COMBO: + return sprintf(buf, "SDcombo\n"); + default: + return -EFAULT; + } +} +static DEVICE_ATTR_RO(type); + +static struct attribute *mmc_dev_attrs[] = { + &dev_attr_type.attr, + NULL, +}; +ATTRIBUTE_GROUPS(mmc_dev); + +/* + * This currently matches any MMC driver to any MMC card - drivers + * themselves make the decision whether to drive this card in their + * probe method. + */ +static int mmc_bus_match(struct device *dev, struct device_driver *drv) +{ + return 1; +} + +static int +mmc_bus_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct mmc_card *card = mmc_dev_to_card(dev); + const char *type; + unsigned int i; + int retval = 0; + + switch (card->type) { + case MMC_TYPE_MMC: + type = "MMC"; + break; + case MMC_TYPE_SD: + type = "SD"; + break; + case MMC_TYPE_SDIO: + type = "SDIO"; + break; + case MMC_TYPE_SD_COMBO: + type = "SDcombo"; + break; + default: + type = NULL; + } + + if (type) { + retval = add_uevent_var(env, "MMC_TYPE=%s", type); + if (retval) + return retval; + } + + if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) { + retval = add_uevent_var(env, "SDIO_ID=%04X:%04X", + card->cis.vendor, card->cis.device); + if (retval) + return retval; + + retval = add_uevent_var(env, "SDIO_REVISION=%u.%u", + card->major_rev, card->minor_rev); + if (retval) + return retval; + + for (i = 0; i < card->num_info; i++) { + retval = add_uevent_var(env, "SDIO_INFO%u=%s", i+1, card->info[i]); + if (retval) + return retval; + } + } + + /* + * SDIO (non-combo) cards are not handled by mmc_block driver and do not + * have accessible CID register which used by mmc_card_name() function. + */ + if (card->type == MMC_TYPE_SDIO) + return 0; + + retval = add_uevent_var(env, "MMC_NAME=%s", mmc_card_name(card)); + if (retval) + return retval; + + /* + * Request the mmc_block device. Note: that this is a direct request + * for the module it carries no information as to what is inserted. + */ + retval = add_uevent_var(env, "MODALIAS=mmc:block"); + + return retval; +} + +static int mmc_bus_probe(struct device *dev) +{ + struct mmc_driver *drv = to_mmc_driver(dev->driver); + struct mmc_card *card = mmc_dev_to_card(dev); + + return drv->probe(card); +} + +static int mmc_bus_remove(struct device *dev) +{ + struct mmc_driver *drv = to_mmc_driver(dev->driver); + struct mmc_card *card = mmc_dev_to_card(dev); + + drv->remove(card); + + return 0; +} + +static void mmc_bus_shutdown(struct device *dev) +{ + struct mmc_driver *drv = to_mmc_driver(dev->driver); + struct mmc_card *card = mmc_dev_to_card(dev); + struct mmc_host *host = card->host; + int ret; + + if (dev->driver && drv->shutdown) + drv->shutdown(card); + + if (host->bus_ops->shutdown) { + ret = host->bus_ops->shutdown(host); + if (ret) + pr_warn("%s: error %d during shutdown\n", + mmc_hostname(host), ret); + } +} + +#ifdef CONFIG_PM_SLEEP +static int mmc_bus_suspend(struct device *dev) +{ + struct mmc_card *card = mmc_dev_to_card(dev); + struct mmc_host *host = card->host; + int ret; + + ret = pm_generic_suspend(dev); + if (ret) + return ret; + + ret = host->bus_ops->suspend(host); + if (ret) + pm_generic_resume(dev); + + return ret; +} + +static int mmc_bus_resume(struct device *dev) +{ + struct mmc_card *card = mmc_dev_to_card(dev); + struct mmc_host *host = card->host; + int ret; + + ret = host->bus_ops->resume(host); + if (ret) + pr_warn("%s: error %d during resume (card was removed?)\n", + mmc_hostname(host), ret); + + ret = pm_generic_resume(dev); + return ret; +} +#endif + +#ifdef CONFIG_PM +static int mmc_runtime_suspend(struct device *dev) +{ + struct mmc_card *card = mmc_dev_to_card(dev); + struct mmc_host *host = card->host; + + return host->bus_ops->runtime_suspend(host); +} + +static int mmc_runtime_resume(struct device *dev) +{ + struct mmc_card *card = mmc_dev_to_card(dev); + struct mmc_host *host = card->host; + + return host->bus_ops->runtime_resume(host); +} +#endif /* !CONFIG_PM */ + +static const struct dev_pm_ops mmc_bus_pm_ops = { + SET_RUNTIME_PM_OPS(mmc_runtime_suspend, mmc_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(mmc_bus_suspend, mmc_bus_resume) +}; + +static struct bus_type mmc_bus_type = { + .name = "mmc", + .dev_groups = mmc_dev_groups, + .match = mmc_bus_match, + .uevent = mmc_bus_uevent, + .probe = mmc_bus_probe, + .remove = mmc_bus_remove, + .shutdown = mmc_bus_shutdown, + .pm = &mmc_bus_pm_ops, +}; + +int mmc_register_bus(void) +{ + return bus_register(&mmc_bus_type); +} + +void mmc_unregister_bus(void) +{ + bus_unregister(&mmc_bus_type); +} + +/** + * mmc_register_driver - register a media driver + * @drv: MMC media driver + */ +int mmc_register_driver(struct mmc_driver *drv) +{ + drv->drv.bus = &mmc_bus_type; + return driver_register(&drv->drv); +} + +EXPORT_SYMBOL(mmc_register_driver); + +/** + * mmc_unregister_driver - unregister a media driver + * @drv: MMC media driver + */ +void mmc_unregister_driver(struct mmc_driver *drv) +{ + drv->drv.bus = &mmc_bus_type; + driver_unregister(&drv->drv); +} + +EXPORT_SYMBOL(mmc_unregister_driver); + +static void mmc_release_card(struct device *dev) +{ + struct mmc_card *card = mmc_dev_to_card(dev); + + sdio_free_common_cis(card); + + kfree(card->info); + + kfree(card); +} + +/* + * Allocate and initialise a new MMC card structure. + */ +struct mmc_card *mmc_alloc_card(struct mmc_host *host, struct device_type *type) +{ + struct mmc_card *card; + + card = kzalloc(sizeof(struct mmc_card), GFP_KERNEL); + if (!card) + return ERR_PTR(-ENOMEM); + + card->host = host; + + device_initialize(&card->dev); + + card->dev.parent = mmc_classdev(host); + card->dev.bus = &mmc_bus_type; + card->dev.release = mmc_release_card; + card->dev.type = type; + + return card; +} + +/* + * Register a new MMC card with the driver model. + */ +int mmc_add_card(struct mmc_card *card) +{ + int ret; + const char *type; + const char *uhs_bus_speed_mode = ""; + static const char *const uhs_speeds[] = { + [UHS_SDR12_BUS_SPEED] = "SDR12 ", + [UHS_SDR25_BUS_SPEED] = "SDR25 ", + [UHS_SDR50_BUS_SPEED] = "SDR50 ", + [UHS_SDR104_BUS_SPEED] = "SDR104 ", + [UHS_DDR50_BUS_SPEED] = "DDR50 ", + }; + + + dev_set_name(&card->dev, "%s:%04x", mmc_hostname(card->host), card->rca); + + switch (card->type) { + case MMC_TYPE_MMC: + type = "MMC"; + break; + case MMC_TYPE_SD: + type = "SD"; + if (mmc_card_blockaddr(card)) { + if (mmc_card_ext_capacity(card)) + type = "SDXC"; + else + type = "SDHC"; + } + break; + case MMC_TYPE_SDIO: + type = "SDIO"; + break; + case MMC_TYPE_SD_COMBO: + type = "SD-combo"; + if (mmc_card_blockaddr(card)) + type = "SDHC-combo"; + break; + default: + type = "?"; + break; + } + + if (mmc_card_uhs(card) && + (card->sd_bus_speed < ARRAY_SIZE(uhs_speeds))) + uhs_bus_speed_mode = uhs_speeds[card->sd_bus_speed]; + + if (mmc_host_is_spi(card->host)) { + pr_info("%s: new %s%s%s card on SPI\n", + mmc_hostname(card->host), + mmc_card_hs(card) ? "high speed " : "", + mmc_card_ddr52(card) ? "DDR " : "", + type); + } else { + pr_info("%s: new %s%s%s%s%s%s card at address %04x\n", + mmc_hostname(card->host), + mmc_card_uhs(card) ? "ultra high speed " : + (mmc_card_hs(card) ? "high speed " : ""), + mmc_card_hs400(card) ? "HS400 " : + (mmc_card_hs200(card) ? "HS200 " : ""), + mmc_card_hs400es(card) ? "Enhanced strobe " : "", + mmc_card_ddr52(card) ? "DDR " : "", + uhs_bus_speed_mode, type, card->rca); + } + +#ifdef CONFIG_DEBUG_FS + mmc_add_card_debugfs(card); +#endif + card->dev.of_node = mmc_of_find_child_device(card->host, 0); + + device_enable_async_suspend(&card->dev); + + ret = device_add(&card->dev); + if (ret) + return ret; + + mmc_card_set_present(card); + + return 0; +} + +/* + * Unregister a new MMC card with the driver model, and + * (eventually) free it. + */ +void mmc_remove_card(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + +#ifdef CONFIG_DEBUG_FS + mmc_remove_card_debugfs(card); +#endif + + if (mmc_card_present(card)) { + if (mmc_host_is_spi(card->host)) { + pr_info("%s: SPI card removed\n", + mmc_hostname(card->host)); + } else { + pr_info("%s: card %04x removed\n", + mmc_hostname(card->host), card->rca); + } + device_del(&card->dev); + of_node_put(card->dev.of_node); + } + + if (host->cqe_enabled) { + host->cqe_ops->cqe_disable(host); + host->cqe_enabled = false; + } + + put_device(&card->dev); +} diff --git a/drivers/mmc/core/bus.h b/drivers/mmc/core/bus.h new file mode 100644 index 000000000..8105852c4 --- /dev/null +++ b/drivers/mmc/core/bus.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * linux/drivers/mmc/core/bus.h + * + * Copyright (C) 2003 Russell King, All Rights Reserved. + * Copyright 2007 Pierre Ossman + */ +#ifndef _MMC_CORE_BUS_H +#define _MMC_CORE_BUS_H + +#include <linux/device.h> + +struct mmc_host; +struct mmc_card; + +#define MMC_DEV_ATTR(name, fmt, args...) \ +static ssize_t mmc_##name##_show (struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct mmc_card *card = mmc_dev_to_card(dev); \ + return sprintf(buf, fmt, args); \ +} \ +static DEVICE_ATTR(name, S_IRUGO, mmc_##name##_show, NULL) + +struct mmc_card *mmc_alloc_card(struct mmc_host *host, + struct device_type *type); +int mmc_add_card(struct mmc_card *card); +void mmc_remove_card(struct mmc_card *card); + +int mmc_register_bus(void); +void mmc_unregister_bus(void); + +struct mmc_driver { + struct device_driver drv; + int (*probe)(struct mmc_card *card); + void (*remove)(struct mmc_card *card); + void (*shutdown)(struct mmc_card *card); +}; + +int mmc_register_driver(struct mmc_driver *drv); +void mmc_unregister_driver(struct mmc_driver *drv); + +#endif diff --git a/drivers/mmc/core/card.h b/drivers/mmc/core/card.h new file mode 100644 index 000000000..5c6986131 --- /dev/null +++ b/drivers/mmc/core/card.h @@ -0,0 +1,231 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Private header for the mmc subsystem + * + * Copyright (C) 2016 Linaro Ltd + * + * Author: Ulf Hansson <ulf.hansson@linaro.org> + */ + +#ifndef _MMC_CORE_CARD_H +#define _MMC_CORE_CARD_H + +#include <linux/mmc/card.h> + +#define mmc_card_name(c) ((c)->cid.prod_name) +#define mmc_card_id(c) (dev_name(&(c)->dev)) +#define mmc_dev_to_card(d) container_of(d, struct mmc_card, dev) + +/* Card states */ +#define MMC_STATE_PRESENT (1<<0) /* present in sysfs */ +#define MMC_STATE_READONLY (1<<1) /* card is read-only */ +#define MMC_STATE_BLOCKADDR (1<<2) /* card uses block-addressing */ +#define MMC_CARD_SDXC (1<<3) /* card is SDXC */ +#define MMC_CARD_REMOVED (1<<4) /* card has been removed */ +#define MMC_STATE_SUSPENDED (1<<5) /* card is suspended */ + +#define mmc_card_present(c) ((c)->state & MMC_STATE_PRESENT) +#define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY) +#define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR) +#define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC) +#define mmc_card_removed(c) ((c) && ((c)->state & MMC_CARD_REMOVED)) +#define mmc_card_suspended(c) ((c)->state & MMC_STATE_SUSPENDED) + +#define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) +#define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) +#define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR) +#define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC) +#define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED) +#define mmc_card_set_suspended(c) ((c)->state |= MMC_STATE_SUSPENDED) +#define mmc_card_clr_suspended(c) ((c)->state &= ~MMC_STATE_SUSPENDED) + +/* + * The world is not perfect and supplies us with broken mmc/sdio devices. + * For at least some of these bugs we need a work-around. + */ +struct mmc_fixup { + /* CID-specific fields. */ + const char *name; + + /* Valid revision range */ + u64 rev_start, rev_end; + + unsigned int manfid; + unsigned short oemid; + + /* SDIO-specific fields. You can use SDIO_ANY_ID here of course */ + u16 cis_vendor, cis_device; + + /* for MMC cards */ + unsigned int ext_csd_rev; + + void (*vendor_fixup)(struct mmc_card *card, int data); + int data; +}; + +#define CID_MANFID_ANY (-1u) +#define CID_OEMID_ANY ((unsigned short) -1) +#define CID_NAME_ANY (NULL) + +#define EXT_CSD_REV_ANY (-1u) + +#define CID_MANFID_SANDISK 0x2 +#define CID_MANFID_SANDISK_SD 0x3 +#define CID_MANFID_ATP 0x9 +#define CID_MANFID_TOSHIBA 0x11 +#define CID_MANFID_MICRON 0x13 +#define CID_MANFID_SAMSUNG 0x15 +#define CID_MANFID_APACER 0x27 +#define CID_MANFID_KINGSTON 0x70 +#define CID_MANFID_HYNIX 0x90 +#define CID_MANFID_NUMONYX 0xFE + +#define END_FIXUP { NULL } + +#define _FIXUP_EXT(_name, _manfid, _oemid, _rev_start, _rev_end, \ + _cis_vendor, _cis_device, \ + _fixup, _data, _ext_csd_rev) \ + { \ + .name = (_name), \ + .manfid = (_manfid), \ + .oemid = (_oemid), \ + .rev_start = (_rev_start), \ + .rev_end = (_rev_end), \ + .cis_vendor = (_cis_vendor), \ + .cis_device = (_cis_device), \ + .vendor_fixup = (_fixup), \ + .data = (_data), \ + .ext_csd_rev = (_ext_csd_rev), \ + } + +#define MMC_FIXUP_REV(_name, _manfid, _oemid, _rev_start, _rev_end, \ + _fixup, _data, _ext_csd_rev) \ + _FIXUP_EXT(_name, _manfid, \ + _oemid, _rev_start, _rev_end, \ + SDIO_ANY_ID, SDIO_ANY_ID, \ + _fixup, _data, _ext_csd_rev) \ + +#define MMC_FIXUP(_name, _manfid, _oemid, _fixup, _data) \ + MMC_FIXUP_REV(_name, _manfid, _oemid, 0, -1ull, _fixup, _data, \ + EXT_CSD_REV_ANY) + +#define MMC_FIXUP_EXT_CSD_REV(_name, _manfid, _oemid, _fixup, _data, \ + _ext_csd_rev) \ + MMC_FIXUP_REV(_name, _manfid, _oemid, 0, -1ull, _fixup, _data, \ + _ext_csd_rev) + +#define SDIO_FIXUP(_vendor, _device, _fixup, _data) \ + _FIXUP_EXT(CID_NAME_ANY, CID_MANFID_ANY, \ + CID_OEMID_ANY, 0, -1ull, \ + _vendor, _device, \ + _fixup, _data, EXT_CSD_REV_ANY) \ + +#define cid_rev(hwrev, fwrev, year, month) \ + (((u64) hwrev) << 40 | \ + ((u64) fwrev) << 32 | \ + ((u64) year) << 16 | \ + ((u64) month)) + +#define cid_rev_card(card) \ + cid_rev(card->cid.hwrev, \ + card->cid.fwrev, \ + card->cid.year, \ + card->cid.month) + +/* + * Unconditionally quirk add/remove. + */ +static inline void __maybe_unused add_quirk(struct mmc_card *card, int data) +{ + card->quirks |= data; +} + +static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) +{ + card->quirks &= ~data; +} + +static inline void __maybe_unused add_limit_rate_quirk(struct mmc_card *card, + int data) +{ + card->quirk_max_rate = data; +} + +/* + * Quirk add/remove for MMC products. + */ +static inline void __maybe_unused add_quirk_mmc(struct mmc_card *card, int data) +{ + if (mmc_card_mmc(card)) + card->quirks |= data; +} + +static inline void __maybe_unused remove_quirk_mmc(struct mmc_card *card, + int data) +{ + if (mmc_card_mmc(card)) + card->quirks &= ~data; +} + +/* + * Quirk add/remove for SD products. + */ +static inline void __maybe_unused add_quirk_sd(struct mmc_card *card, int data) +{ + if (mmc_card_sd(card)) + card->quirks |= data; +} + +static inline void __maybe_unused remove_quirk_sd(struct mmc_card *card, + int data) +{ + if (mmc_card_sd(card)) + card->quirks &= ~data; +} + +static inline int mmc_card_lenient_fn0(const struct mmc_card *c) +{ + return c->quirks & MMC_QUIRK_LENIENT_FN0; +} + +static inline int mmc_blksz_for_byte_mode(const struct mmc_card *c) +{ + return c->quirks & MMC_QUIRK_BLKSZ_FOR_BYTE_MODE; +} + +static inline int mmc_card_disable_cd(const struct mmc_card *c) +{ + return c->quirks & MMC_QUIRK_DISABLE_CD; +} + +static inline int mmc_card_nonstd_func_interface(const struct mmc_card *c) +{ + return c->quirks & MMC_QUIRK_NONSTD_FUNC_IF; +} + +static inline int mmc_card_broken_byte_mode_512(const struct mmc_card *c) +{ + return c->quirks & MMC_QUIRK_BROKEN_BYTE_MODE_512; +} + +static inline int mmc_card_long_read_time(const struct mmc_card *c) +{ + return c->quirks & MMC_QUIRK_LONG_READ_TIME; +} + +static inline int mmc_card_broken_irq_polling(const struct mmc_card *c) +{ + return c->quirks & MMC_QUIRK_BROKEN_IRQ_POLLING; +} + +static inline int mmc_card_broken_hpi(const struct mmc_card *c) +{ + return c->quirks & MMC_QUIRK_BROKEN_HPI; +} + +static inline int mmc_card_broken_sd_discard(const struct mmc_card *c) +{ + return c->quirks & MMC_QUIRK_BROKEN_SD_DISCARD; +} + +#endif diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c new file mode 100644 index 000000000..d5ca59bd1 --- /dev/null +++ b/drivers/mmc/core/core.c @@ -0,0 +1,2417 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/mmc/core/core.c + * + * Copyright (C) 2003-2004 Russell King, All Rights Reserved. + * SD support Copyright (C) 2004 Ian Molton, All Rights Reserved. + * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved. + * MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved. + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/pagemap.h> +#include <linux/err.h> +#include <linux/leds.h> +#include <linux/scatterlist.h> +#include <linux/log2.h> +#include <linux/pm_runtime.h> +#include <linux/pm_wakeup.h> +#include <linux/suspend.h> +#include <linux/fault-inject.h> +#include <linux/random.h> +#include <linux/slab.h> +#include <linux/of.h> + +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sd.h> +#include <linux/mmc/slot-gpio.h> + +#define CREATE_TRACE_POINTS +#include <trace/events/mmc.h> + +#include "core.h" +#include "card.h" +#include "bus.h" +#include "host.h" +#include "sdio_bus.h" +#include "pwrseq.h" + +#include "mmc_ops.h" +#include "sd_ops.h" +#include "sdio_ops.h" + +/* The max erase timeout, used when host->max_busy_timeout isn't specified */ +#define MMC_ERASE_TIMEOUT_MS (60 * 1000) /* 60 s */ +#define SD_DISCARD_TIMEOUT_MS (250) + +static const unsigned freqs[] = { 400000, 300000, 200000, 100000 }; + +/* + * Enabling software CRCs on the data blocks can be a significant (30%) + * performance cost, and for other reasons may not always be desired. + * So we allow it it to be disabled. + */ +bool use_spi_crc = 1; +module_param(use_spi_crc, bool, 0); + +static int mmc_schedule_delayed_work(struct delayed_work *work, + unsigned long delay) +{ + /* + * We use the system_freezable_wq, because of two reasons. + * First, it allows several works (not the same work item) to be + * executed simultaneously. Second, the queue becomes frozen when + * userspace becomes frozen during system PM. + */ + return queue_delayed_work(system_freezable_wq, work, delay); +} + +#ifdef CONFIG_FAIL_MMC_REQUEST + +/* + * Internal function. Inject random data errors. + * If mmc_data is NULL no errors are injected. + */ +static void mmc_should_fail_request(struct mmc_host *host, + struct mmc_request *mrq) +{ + struct mmc_command *cmd = mrq->cmd; + struct mmc_data *data = mrq->data; + static const int data_errors[] = { + -ETIMEDOUT, + -EILSEQ, + -EIO, + }; + + if (!data) + return; + + if ((cmd && cmd->error) || data->error || + !should_fail(&host->fail_mmc_request, data->blksz * data->blocks)) + return; + + data->error = data_errors[prandom_u32() % ARRAY_SIZE(data_errors)]; + data->bytes_xfered = (prandom_u32() % (data->bytes_xfered >> 9)) << 9; +} + +#else /* CONFIG_FAIL_MMC_REQUEST */ + +static inline void mmc_should_fail_request(struct mmc_host *host, + struct mmc_request *mrq) +{ +} + +#endif /* CONFIG_FAIL_MMC_REQUEST */ + +static inline void mmc_complete_cmd(struct mmc_request *mrq) +{ + if (mrq->cap_cmd_during_tfr && !completion_done(&mrq->cmd_completion)) + complete_all(&mrq->cmd_completion); +} + +void mmc_command_done(struct mmc_host *host, struct mmc_request *mrq) +{ + if (!mrq->cap_cmd_during_tfr) + return; + + mmc_complete_cmd(mrq); + + pr_debug("%s: cmd done, tfr ongoing (CMD%u)\n", + mmc_hostname(host), mrq->cmd->opcode); +} +EXPORT_SYMBOL(mmc_command_done); + +/** + * mmc_request_done - finish processing an MMC request + * @host: MMC host which completed request + * @mrq: MMC request which request + * + * MMC drivers should call this function when they have completed + * their processing of a request. + */ +void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq) +{ + struct mmc_command *cmd = mrq->cmd; + int err = cmd->error; + + /* Flag re-tuning needed on CRC errors */ + if (cmd->opcode != MMC_SEND_TUNING_BLOCK && + cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200 && + !host->retune_crc_disable && + (err == -EILSEQ || (mrq->sbc && mrq->sbc->error == -EILSEQ) || + (mrq->data && mrq->data->error == -EILSEQ) || + (mrq->stop && mrq->stop->error == -EILSEQ))) + mmc_retune_needed(host); + + if (err && cmd->retries && mmc_host_is_spi(host)) { + if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND) + cmd->retries = 0; + } + + if (host->ongoing_mrq == mrq) + host->ongoing_mrq = NULL; + + mmc_complete_cmd(mrq); + + trace_mmc_request_done(host, mrq); + + /* + * We list various conditions for the command to be considered + * properly done: + * + * - There was no error, OK fine then + * - We are not doing some kind of retry + * - The card was removed (...so just complete everything no matter + * if there are errors or retries) + */ + if (!err || !cmd->retries || mmc_card_removed(host->card)) { + mmc_should_fail_request(host, mrq); + + if (!host->ongoing_mrq) + led_trigger_event(host->led, LED_OFF); + + if (mrq->sbc) { + pr_debug("%s: req done <CMD%u>: %d: %08x %08x %08x %08x\n", + mmc_hostname(host), mrq->sbc->opcode, + mrq->sbc->error, + mrq->sbc->resp[0], mrq->sbc->resp[1], + mrq->sbc->resp[2], mrq->sbc->resp[3]); + } + + pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n", + mmc_hostname(host), cmd->opcode, err, + cmd->resp[0], cmd->resp[1], + cmd->resp[2], cmd->resp[3]); + + if (mrq->data) { + pr_debug("%s: %d bytes transferred: %d\n", + mmc_hostname(host), + mrq->data->bytes_xfered, mrq->data->error); + } + + if (mrq->stop) { + pr_debug("%s: (CMD%u): %d: %08x %08x %08x %08x\n", + mmc_hostname(host), mrq->stop->opcode, + mrq->stop->error, + mrq->stop->resp[0], mrq->stop->resp[1], + mrq->stop->resp[2], mrq->stop->resp[3]); + } + } + /* + * Request starter must handle retries - see + * mmc_wait_for_req_done(). + */ + if (mrq->done) + mrq->done(mrq); +} + +EXPORT_SYMBOL(mmc_request_done); + +static void __mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) +{ + int err; + + /* Assumes host controller has been runtime resumed by mmc_claim_host */ + err = mmc_retune(host); + if (err) { + mrq->cmd->error = err; + mmc_request_done(host, mrq); + return; + } + + /* + * For sdio rw commands we must wait for card busy otherwise some + * sdio devices won't work properly. + * And bypass I/O abort, reset and bus suspend operations. + */ + if (sdio_is_io_busy(mrq->cmd->opcode, mrq->cmd->arg) && + host->ops->card_busy) { + int tries = 500; /* Wait aprox 500ms at maximum */ + + while (host->ops->card_busy(host) && --tries) + mmc_delay(1); + + if (tries == 0) { + mrq->cmd->error = -EBUSY; + mmc_request_done(host, mrq); + return; + } + } + + if (mrq->cap_cmd_during_tfr) { + host->ongoing_mrq = mrq; + /* + * Retry path could come through here without having waiting on + * cmd_completion, so ensure it is reinitialised. + */ + reinit_completion(&mrq->cmd_completion); + } + + trace_mmc_request_start(host, mrq); + + if (host->cqe_on) + host->cqe_ops->cqe_off(host); + + host->ops->request(host, mrq); +} + +static void mmc_mrq_pr_debug(struct mmc_host *host, struct mmc_request *mrq, + bool cqe) +{ + if (mrq->sbc) { + pr_debug("<%s: starting CMD%u arg %08x flags %08x>\n", + mmc_hostname(host), mrq->sbc->opcode, + mrq->sbc->arg, mrq->sbc->flags); + } + + if (mrq->cmd) { + pr_debug("%s: starting %sCMD%u arg %08x flags %08x\n", + mmc_hostname(host), cqe ? "CQE direct " : "", + mrq->cmd->opcode, mrq->cmd->arg, mrq->cmd->flags); + } else if (cqe) { + pr_debug("%s: starting CQE transfer for tag %d blkaddr %u\n", + mmc_hostname(host), mrq->tag, mrq->data->blk_addr); + } + + if (mrq->data) { + pr_debug("%s: blksz %d blocks %d flags %08x " + "tsac %d ms nsac %d\n", + mmc_hostname(host), mrq->data->blksz, + mrq->data->blocks, mrq->data->flags, + mrq->data->timeout_ns / 1000000, + mrq->data->timeout_clks); + } + + if (mrq->stop) { + pr_debug("%s: CMD%u arg %08x flags %08x\n", + mmc_hostname(host), mrq->stop->opcode, + mrq->stop->arg, mrq->stop->flags); + } +} + +static int mmc_mrq_prep(struct mmc_host *host, struct mmc_request *mrq) +{ + unsigned int i, sz = 0; + struct scatterlist *sg; + + if (mrq->cmd) { + mrq->cmd->error = 0; + mrq->cmd->mrq = mrq; + mrq->cmd->data = mrq->data; + } + if (mrq->sbc) { + mrq->sbc->error = 0; + mrq->sbc->mrq = mrq; + } + if (mrq->data) { + if (mrq->data->blksz > host->max_blk_size || + mrq->data->blocks > host->max_blk_count || + mrq->data->blocks * mrq->data->blksz > host->max_req_size) + return -EINVAL; + + for_each_sg(mrq->data->sg, sg, mrq->data->sg_len, i) + sz += sg->length; + if (sz != mrq->data->blocks * mrq->data->blksz) + return -EINVAL; + + mrq->data->error = 0; + mrq->data->mrq = mrq; + if (mrq->stop) { + mrq->data->stop = mrq->stop; + mrq->stop->error = 0; + mrq->stop->mrq = mrq; + } + } + + return 0; +} + +int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) +{ + int err; + + init_completion(&mrq->cmd_completion); + + mmc_retune_hold(host); + + if (mmc_card_removed(host->card)) + return -ENOMEDIUM; + + mmc_mrq_pr_debug(host, mrq, false); + + WARN_ON(!host->claimed); + + err = mmc_mrq_prep(host, mrq); + if (err) + return err; + + led_trigger_event(host->led, LED_FULL); + __mmc_start_request(host, mrq); + + return 0; +} +EXPORT_SYMBOL(mmc_start_request); + +static void mmc_wait_done(struct mmc_request *mrq) +{ + complete(&mrq->completion); +} + +static inline void mmc_wait_ongoing_tfr_cmd(struct mmc_host *host) +{ + struct mmc_request *ongoing_mrq = READ_ONCE(host->ongoing_mrq); + + /* + * If there is an ongoing transfer, wait for the command line to become + * available. + */ + if (ongoing_mrq && !completion_done(&ongoing_mrq->cmd_completion)) + wait_for_completion(&ongoing_mrq->cmd_completion); +} + +static int __mmc_start_req(struct mmc_host *host, struct mmc_request *mrq) +{ + int err; + + mmc_wait_ongoing_tfr_cmd(host); + + init_completion(&mrq->completion); + mrq->done = mmc_wait_done; + + err = mmc_start_request(host, mrq); + if (err) { + mrq->cmd->error = err; + mmc_complete_cmd(mrq); + complete(&mrq->completion); + } + + return err; +} + +void mmc_wait_for_req_done(struct mmc_host *host, struct mmc_request *mrq) +{ + struct mmc_command *cmd; + + while (1) { + wait_for_completion(&mrq->completion); + + cmd = mrq->cmd; + + if (!cmd->error || !cmd->retries || + mmc_card_removed(host->card)) + break; + + mmc_retune_recheck(host); + + pr_debug("%s: req failed (CMD%u): %d, retrying...\n", + mmc_hostname(host), cmd->opcode, cmd->error); + cmd->retries--; + cmd->error = 0; + __mmc_start_request(host, mrq); + } + + mmc_retune_release(host); +} +EXPORT_SYMBOL(mmc_wait_for_req_done); + +/* + * mmc_cqe_start_req - Start a CQE request. + * @host: MMC host to start the request + * @mrq: request to start + * + * Start the request, re-tuning if needed and it is possible. Returns an error + * code if the request fails to start or -EBUSY if CQE is busy. + */ +int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq) +{ + int err; + + /* + * CQE cannot process re-tuning commands. Caller must hold retuning + * while CQE is in use. Re-tuning can happen here only when CQE has no + * active requests i.e. this is the first. Note, re-tuning will call + * ->cqe_off(). + */ + err = mmc_retune(host); + if (err) + goto out_err; + + mrq->host = host; + + mmc_mrq_pr_debug(host, mrq, true); + + err = mmc_mrq_prep(host, mrq); + if (err) + goto out_err; + + err = host->cqe_ops->cqe_request(host, mrq); + if (err) + goto out_err; + + trace_mmc_request_start(host, mrq); + + return 0; + +out_err: + if (mrq->cmd) { + pr_debug("%s: failed to start CQE direct CMD%u, error %d\n", + mmc_hostname(host), mrq->cmd->opcode, err); + } else { + pr_debug("%s: failed to start CQE transfer for tag %d, error %d\n", + mmc_hostname(host), mrq->tag, err); + } + return err; +} +EXPORT_SYMBOL(mmc_cqe_start_req); + +/** + * mmc_cqe_request_done - CQE has finished processing an MMC request + * @host: MMC host which completed request + * @mrq: MMC request which completed + * + * CQE drivers should call this function when they have completed + * their processing of a request. + */ +void mmc_cqe_request_done(struct mmc_host *host, struct mmc_request *mrq) +{ + mmc_should_fail_request(host, mrq); + + /* Flag re-tuning needed on CRC errors */ + if ((mrq->cmd && mrq->cmd->error == -EILSEQ) || + (mrq->data && mrq->data->error == -EILSEQ)) + mmc_retune_needed(host); + + trace_mmc_request_done(host, mrq); + + if (mrq->cmd) { + pr_debug("%s: CQE req done (direct CMD%u): %d\n", + mmc_hostname(host), mrq->cmd->opcode, mrq->cmd->error); + } else { + pr_debug("%s: CQE transfer done tag %d\n", + mmc_hostname(host), mrq->tag); + } + + if (mrq->data) { + pr_debug("%s: %d bytes transferred: %d\n", + mmc_hostname(host), + mrq->data->bytes_xfered, mrq->data->error); + } + + mrq->done(mrq); +} +EXPORT_SYMBOL(mmc_cqe_request_done); + +/** + * mmc_cqe_post_req - CQE post process of a completed MMC request + * @host: MMC host + * @mrq: MMC request to be processed + */ +void mmc_cqe_post_req(struct mmc_host *host, struct mmc_request *mrq) +{ + if (host->cqe_ops->cqe_post_req) + host->cqe_ops->cqe_post_req(host, mrq); +} +EXPORT_SYMBOL(mmc_cqe_post_req); + +/* Arbitrary 1 second timeout */ +#define MMC_CQE_RECOVERY_TIMEOUT 1000 + +/* + * mmc_cqe_recovery - Recover from CQE errors. + * @host: MMC host to recover + * + * Recovery consists of stopping CQE, stopping eMMC, discarding the queue in + * in eMMC, and discarding the queue in CQE. CQE must call + * mmc_cqe_request_done() on all requests. An error is returned if the eMMC + * fails to discard its queue. + */ +int mmc_cqe_recovery(struct mmc_host *host) +{ + struct mmc_command cmd; + int err; + + mmc_retune_hold_now(host); + + /* + * Recovery is expected seldom, if at all, but it reduces performance, + * so make sure it is not completely silent. + */ + pr_warn("%s: running CQE recovery\n", mmc_hostname(host)); + + host->cqe_ops->cqe_recovery_start(host); + + memset(&cmd, 0, sizeof(cmd)); + cmd.opcode = MMC_STOP_TRANSMISSION; + cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; + cmd.flags &= ~MMC_RSP_CRC; /* Ignore CRC */ + cmd.busy_timeout = MMC_CQE_RECOVERY_TIMEOUT; + mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); + + mmc_poll_for_busy(host->card, MMC_CQE_RECOVERY_TIMEOUT, MMC_BUSY_IO); + + memset(&cmd, 0, sizeof(cmd)); + cmd.opcode = MMC_CMDQ_TASK_MGMT; + cmd.arg = 1; /* Discard entire queue */ + cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; + cmd.flags &= ~MMC_RSP_CRC; /* Ignore CRC */ + cmd.busy_timeout = MMC_CQE_RECOVERY_TIMEOUT; + err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); + + host->cqe_ops->cqe_recovery_finish(host); + + if (err) + err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); + + mmc_retune_release(host); + + return err; +} +EXPORT_SYMBOL(mmc_cqe_recovery); + +/** + * mmc_is_req_done - Determine if a 'cap_cmd_during_tfr' request is done + * @host: MMC host + * @mrq: MMC request + * + * mmc_is_req_done() is used with requests that have + * mrq->cap_cmd_during_tfr = true. mmc_is_req_done() must be called after + * starting a request and before waiting for it to complete. That is, + * either in between calls to mmc_start_req(), or after mmc_wait_for_req() + * and before mmc_wait_for_req_done(). If it is called at other times the + * result is not meaningful. + */ +bool mmc_is_req_done(struct mmc_host *host, struct mmc_request *mrq) +{ + return completion_done(&mrq->completion); +} +EXPORT_SYMBOL(mmc_is_req_done); + +/** + * mmc_wait_for_req - start a request and wait for completion + * @host: MMC host to start command + * @mrq: MMC request to start + * + * Start a new MMC custom command request for a host, and wait + * for the command to complete. In the case of 'cap_cmd_during_tfr' + * requests, the transfer is ongoing and the caller can issue further + * commands that do not use the data lines, and then wait by calling + * mmc_wait_for_req_done(). + * Does not attempt to parse the response. + */ +void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq) +{ + __mmc_start_req(host, mrq); + + if (!mrq->cap_cmd_during_tfr) + mmc_wait_for_req_done(host, mrq); +} +EXPORT_SYMBOL(mmc_wait_for_req); + +/** + * mmc_wait_for_cmd - start a command and wait for completion + * @host: MMC host to start command + * @cmd: MMC command to start + * @retries: maximum number of retries + * + * Start a new MMC command for a host, and wait for the command + * to complete. Return any error that occurred while the command + * was executing. Do not attempt to parse the response. + */ +int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd, int retries) +{ + struct mmc_request mrq = {}; + + WARN_ON(!host->claimed); + + memset(cmd->resp, 0, sizeof(cmd->resp)); + cmd->retries = retries; + + mrq.cmd = cmd; + cmd->data = NULL; + + mmc_wait_for_req(host, &mrq); + + return cmd->error; +} + +EXPORT_SYMBOL(mmc_wait_for_cmd); + +/** + * mmc_set_data_timeout - set the timeout for a data command + * @data: data phase for command + * @card: the MMC card associated with the data transfer + * + * Computes the data timeout parameters according to the + * correct algorithm given the card type. + */ +void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) +{ + unsigned int mult; + + /* + * SDIO cards only define an upper 1 s limit on access. + */ + if (mmc_card_sdio(card)) { + data->timeout_ns = 1000000000; + data->timeout_clks = 0; + return; + } + + /* + * SD cards use a 100 multiplier rather than 10 + */ + mult = mmc_card_sd(card) ? 100 : 10; + + /* + * Scale up the multiplier (and therefore the timeout) by + * the r2w factor for writes. + */ + if (data->flags & MMC_DATA_WRITE) + mult <<= card->csd.r2w_factor; + + data->timeout_ns = card->csd.taac_ns * mult; + data->timeout_clks = card->csd.taac_clks * mult; + + /* + * SD cards also have an upper limit on the timeout. + */ + if (mmc_card_sd(card)) { + unsigned int timeout_us, limit_us; + + timeout_us = data->timeout_ns / 1000; + if (card->host->ios.clock) + timeout_us += data->timeout_clks * 1000 / + (card->host->ios.clock / 1000); + + if (data->flags & MMC_DATA_WRITE) + /* + * The MMC spec "It is strongly recommended + * for hosts to implement more than 500ms + * timeout value even if the card indicates + * the 250ms maximum busy length." Even the + * previous value of 300ms is known to be + * insufficient for some cards. + */ + limit_us = 3000000; + else + limit_us = 100000; + + /* + * SDHC cards always use these fixed values. + */ + if (timeout_us > limit_us) { + data->timeout_ns = limit_us * 1000; + data->timeout_clks = 0; + } + + /* assign limit value if invalid */ + if (timeout_us == 0) + data->timeout_ns = limit_us * 1000; + } + + /* + * Some cards require longer data read timeout than indicated in CSD. + * Address this by setting the read timeout to a "reasonably high" + * value. For the cards tested, 600ms has proven enough. If necessary, + * this value can be increased if other problematic cards require this. + */ + if (mmc_card_long_read_time(card) && data->flags & MMC_DATA_READ) { + data->timeout_ns = 600000000; + data->timeout_clks = 0; + } + + /* + * Some cards need very high timeouts if driven in SPI mode. + * The worst observed timeout was 900ms after writing a + * continuous stream of data until the internal logic + * overflowed. + */ + if (mmc_host_is_spi(card->host)) { + if (data->flags & MMC_DATA_WRITE) { + if (data->timeout_ns < 1000000000) + data->timeout_ns = 1000000000; /* 1s */ + } else { + if (data->timeout_ns < 100000000) + data->timeout_ns = 100000000; /* 100ms */ + } + } +} +EXPORT_SYMBOL(mmc_set_data_timeout); + +/* + * Allow claiming an already claimed host if the context is the same or there is + * no context but the task is the same. + */ +static inline bool mmc_ctx_matches(struct mmc_host *host, struct mmc_ctx *ctx, + struct task_struct *task) +{ + return host->claimer == ctx || + (!ctx && task && host->claimer->task == task); +} + +static inline void mmc_ctx_set_claimer(struct mmc_host *host, + struct mmc_ctx *ctx, + struct task_struct *task) +{ + if (!host->claimer) { + if (ctx) + host->claimer = ctx; + else + host->claimer = &host->default_ctx; + } + if (task) + host->claimer->task = task; +} + +/** + * __mmc_claim_host - exclusively claim a host + * @host: mmc host to claim + * @ctx: context that claims the host or NULL in which case the default + * context will be used + * @abort: whether or not the operation should be aborted + * + * Claim a host for a set of operations. If @abort is non null and + * dereference a non-zero value then this will return prematurely with + * that non-zero value without acquiring the lock. Returns zero + * with the lock held otherwise. + */ +int __mmc_claim_host(struct mmc_host *host, struct mmc_ctx *ctx, + atomic_t *abort) +{ + struct task_struct *task = ctx ? NULL : current; + DECLARE_WAITQUEUE(wait, current); + unsigned long flags; + int stop; + bool pm = false; + + might_sleep(); + + add_wait_queue(&host->wq, &wait); + spin_lock_irqsave(&host->lock, flags); + while (1) { + set_current_state(TASK_UNINTERRUPTIBLE); + stop = abort ? atomic_read(abort) : 0; + if (stop || !host->claimed || mmc_ctx_matches(host, ctx, task)) + break; + spin_unlock_irqrestore(&host->lock, flags); + schedule(); + spin_lock_irqsave(&host->lock, flags); + } + set_current_state(TASK_RUNNING); + if (!stop) { + host->claimed = 1; + mmc_ctx_set_claimer(host, ctx, task); + host->claim_cnt += 1; + if (host->claim_cnt == 1) + pm = true; + } else + wake_up(&host->wq); + spin_unlock_irqrestore(&host->lock, flags); + remove_wait_queue(&host->wq, &wait); + + if (pm) + pm_runtime_get_sync(mmc_dev(host)); + + return stop; +} +EXPORT_SYMBOL(__mmc_claim_host); + +/** + * mmc_release_host - release a host + * @host: mmc host to release + * + * Release a MMC host, allowing others to claim the host + * for their operations. + */ +void mmc_release_host(struct mmc_host *host) +{ + unsigned long flags; + + WARN_ON(!host->claimed); + + spin_lock_irqsave(&host->lock, flags); + if (--host->claim_cnt) { + /* Release for nested claim */ + spin_unlock_irqrestore(&host->lock, flags); + } else { + host->claimed = 0; + host->claimer->task = NULL; + host->claimer = NULL; + spin_unlock_irqrestore(&host->lock, flags); + wake_up(&host->wq); + pm_runtime_mark_last_busy(mmc_dev(host)); + if (host->caps & MMC_CAP_SYNC_RUNTIME_PM) + pm_runtime_put_sync_suspend(mmc_dev(host)); + else + pm_runtime_put_autosuspend(mmc_dev(host)); + } +} +EXPORT_SYMBOL(mmc_release_host); + +/* + * This is a helper function, which fetches a runtime pm reference for the + * card device and also claims the host. + */ +void mmc_get_card(struct mmc_card *card, struct mmc_ctx *ctx) +{ + pm_runtime_get_sync(&card->dev); + __mmc_claim_host(card->host, ctx, NULL); +} +EXPORT_SYMBOL(mmc_get_card); + +/* + * This is a helper function, which releases the host and drops the runtime + * pm reference for the card device. + */ +void mmc_put_card(struct mmc_card *card, struct mmc_ctx *ctx) +{ + struct mmc_host *host = card->host; + + WARN_ON(ctx && host->claimer != ctx); + + mmc_release_host(host); + pm_runtime_mark_last_busy(&card->dev); + pm_runtime_put_autosuspend(&card->dev); +} +EXPORT_SYMBOL(mmc_put_card); + +/* + * Internal function that does the actual ios call to the host driver, + * optionally printing some debug output. + */ +static inline void mmc_set_ios(struct mmc_host *host) +{ + struct mmc_ios *ios = &host->ios; + + pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u " + "width %u timing %u\n", + mmc_hostname(host), ios->clock, ios->bus_mode, + ios->power_mode, ios->chip_select, ios->vdd, + 1 << ios->bus_width, ios->timing); + + host->ops->set_ios(host, ios); +} + +/* + * Control chip select pin on a host. + */ +void mmc_set_chip_select(struct mmc_host *host, int mode) +{ + host->ios.chip_select = mode; + mmc_set_ios(host); +} + +/* + * Sets the host clock to the highest possible frequency that + * is below "hz". + */ +void mmc_set_clock(struct mmc_host *host, unsigned int hz) +{ + WARN_ON(hz && hz < host->f_min); + + if (hz > host->f_max) + hz = host->f_max; + + host->ios.clock = hz; + mmc_set_ios(host); +} + +int mmc_execute_tuning(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + u32 opcode; + int err; + + if (!host->ops->execute_tuning) + return 0; + + if (host->cqe_on) + host->cqe_ops->cqe_off(host); + + if (mmc_card_mmc(card)) + opcode = MMC_SEND_TUNING_BLOCK_HS200; + else + opcode = MMC_SEND_TUNING_BLOCK; + + err = host->ops->execute_tuning(host, opcode); + + if (err) { + pr_err("%s: tuning execution failed: %d\n", + mmc_hostname(host), err); + } else { + host->retune_now = 0; + host->need_retune = 0; + mmc_retune_enable(host); + } + + return err; +} + +/* + * Change the bus mode (open drain/push-pull) of a host. + */ +void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode) +{ + host->ios.bus_mode = mode; + mmc_set_ios(host); +} + +/* + * Change data bus width of a host. + */ +void mmc_set_bus_width(struct mmc_host *host, unsigned int width) +{ + host->ios.bus_width = width; + mmc_set_ios(host); +} + +/* + * Set initial state after a power cycle or a hw_reset. + */ +void mmc_set_initial_state(struct mmc_host *host) +{ + if (host->cqe_on) + host->cqe_ops->cqe_off(host); + + mmc_retune_disable(host); + + if (mmc_host_is_spi(host)) + host->ios.chip_select = MMC_CS_HIGH; + else + host->ios.chip_select = MMC_CS_DONTCARE; + host->ios.bus_mode = MMC_BUSMODE_PUSHPULL; + host->ios.bus_width = MMC_BUS_WIDTH_1; + host->ios.timing = MMC_TIMING_LEGACY; + host->ios.drv_type = 0; + host->ios.enhanced_strobe = false; + + /* + * Make sure we are in non-enhanced strobe mode before we + * actually enable it in ext_csd. + */ + if ((host->caps2 & MMC_CAP2_HS400_ES) && + host->ops->hs400_enhanced_strobe) + host->ops->hs400_enhanced_strobe(host, &host->ios); + + mmc_set_ios(host); +} + +/** + * mmc_vdd_to_ocrbitnum - Convert a voltage to the OCR bit number + * @vdd: voltage (mV) + * @low_bits: prefer low bits in boundary cases + * + * This function returns the OCR bit number according to the provided @vdd + * value. If conversion is not possible a negative errno value returned. + * + * Depending on the @low_bits flag the function prefers low or high OCR bits + * on boundary voltages. For example, + * with @low_bits = true, 3300 mV translates to ilog2(MMC_VDD_32_33); + * with @low_bits = false, 3300 mV translates to ilog2(MMC_VDD_33_34); + * + * Any value in the [1951:1999] range translates to the ilog2(MMC_VDD_20_21). + */ +static int mmc_vdd_to_ocrbitnum(int vdd, bool low_bits) +{ + const int max_bit = ilog2(MMC_VDD_35_36); + int bit; + + if (vdd < 1650 || vdd > 3600) + return -EINVAL; + + if (vdd >= 1650 && vdd <= 1950) + return ilog2(MMC_VDD_165_195); + + if (low_bits) + vdd -= 1; + + /* Base 2000 mV, step 100 mV, bit's base 8. */ + bit = (vdd - 2000) / 100 + 8; + if (bit > max_bit) + return max_bit; + return bit; +} + +/** + * mmc_vddrange_to_ocrmask - Convert a voltage range to the OCR mask + * @vdd_min: minimum voltage value (mV) + * @vdd_max: maximum voltage value (mV) + * + * This function returns the OCR mask bits according to the provided @vdd_min + * and @vdd_max values. If conversion is not possible the function returns 0. + * + * Notes wrt boundary cases: + * This function sets the OCR bits for all boundary voltages, for example + * [3300:3400] range is translated to MMC_VDD_32_33 | MMC_VDD_33_34 | + * MMC_VDD_34_35 mask. + */ +u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max) +{ + u32 mask = 0; + + if (vdd_max < vdd_min) + return 0; + + /* Prefer high bits for the boundary vdd_max values. */ + vdd_max = mmc_vdd_to_ocrbitnum(vdd_max, false); + if (vdd_max < 0) + return 0; + + /* Prefer low bits for the boundary vdd_min values. */ + vdd_min = mmc_vdd_to_ocrbitnum(vdd_min, true); + if (vdd_min < 0) + return 0; + + /* Fill the mask, from max bit to min bit. */ + while (vdd_max >= vdd_min) + mask |= 1 << vdd_max--; + + return mask; +} + +static int mmc_of_get_func_num(struct device_node *node) +{ + u32 reg; + int ret; + + ret = of_property_read_u32(node, "reg", ®); + if (ret < 0) + return ret; + + return reg; +} + +struct device_node *mmc_of_find_child_device(struct mmc_host *host, + unsigned func_num) +{ + struct device_node *node; + + if (!host->parent || !host->parent->of_node) + return NULL; + + for_each_child_of_node(host->parent->of_node, node) { + if (mmc_of_get_func_num(node) == func_num) + return node; + } + + return NULL; +} + +/* + * Mask off any voltages we don't support and select + * the lowest voltage + */ +u32 mmc_select_voltage(struct mmc_host *host, u32 ocr) +{ + int bit; + + /* + * Sanity check the voltages that the card claims to + * support. + */ + if (ocr & 0x7F) { + dev_warn(mmc_dev(host), + "card claims to support voltages below defined range\n"); + ocr &= ~0x7F; + } + + ocr &= host->ocr_avail; + if (!ocr) { + dev_warn(mmc_dev(host), "no support for card's volts\n"); + return 0; + } + + if (host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) { + bit = ffs(ocr) - 1; + ocr &= 3 << bit; + mmc_power_cycle(host, ocr); + } else { + bit = fls(ocr) - 1; + /* + * The bit variable represents the highest voltage bit set in + * the OCR register. + * To keep a range of 2 values (e.g. 3.2V/3.3V and 3.3V/3.4V), + * we must shift the mask '3' with (bit - 1). + */ + ocr &= 3 << (bit - 1); + if (bit != host->ios.vdd) + dev_warn(mmc_dev(host), "exceeding card's volts\n"); + } + + return ocr; +} + +int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage) +{ + int err = 0; + int old_signal_voltage = host->ios.signal_voltage; + + host->ios.signal_voltage = signal_voltage; + if (host->ops->start_signal_voltage_switch) + err = host->ops->start_signal_voltage_switch(host, &host->ios); + + if (err) + host->ios.signal_voltage = old_signal_voltage; + + return err; + +} + +void mmc_set_initial_signal_voltage(struct mmc_host *host) +{ + /* Try to set signal voltage to 3.3V but fall back to 1.8v or 1.2v */ + if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330)) + dev_dbg(mmc_dev(host), "Initial signal voltage of 3.3v\n"); + else if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180)) + dev_dbg(mmc_dev(host), "Initial signal voltage of 1.8v\n"); + else if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120)) + dev_dbg(mmc_dev(host), "Initial signal voltage of 1.2v\n"); +} + +int mmc_host_set_uhs_voltage(struct mmc_host *host) +{ + u32 clock; + + /* + * During a signal voltage level switch, the clock must be gated + * for 5 ms according to the SD spec + */ + clock = host->ios.clock; + host->ios.clock = 0; + mmc_set_ios(host); + + if (mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180)) + return -EAGAIN; + + /* Keep clock gated for at least 10 ms, though spec only says 5 ms */ + mmc_delay(10); + host->ios.clock = clock; + mmc_set_ios(host); + + return 0; +} + +int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr) +{ + struct mmc_command cmd = {}; + int err = 0; + + /* + * If we cannot switch voltages, return failure so the caller + * can continue without UHS mode + */ + if (!host->ops->start_signal_voltage_switch) + return -EPERM; + if (!host->ops->card_busy) + pr_warn("%s: cannot verify signal voltage switch\n", + mmc_hostname(host)); + + cmd.opcode = SD_SWITCH_VOLTAGE; + cmd.arg = 0; + cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) + goto power_cycle; + + if (!mmc_host_is_spi(host) && (cmd.resp[0] & R1_ERROR)) + return -EIO; + + /* + * The card should drive cmd and dat[0:3] low immediately + * after the response of cmd11, but wait 1 ms to be sure + */ + mmc_delay(1); + if (host->ops->card_busy && !host->ops->card_busy(host)) { + err = -EAGAIN; + goto power_cycle; + } + + if (mmc_host_set_uhs_voltage(host)) { + /* + * Voltages may not have been switched, but we've already + * sent CMD11, so a power cycle is required anyway + */ + err = -EAGAIN; + goto power_cycle; + } + + /* Wait for at least 1 ms according to spec */ + mmc_delay(1); + + /* + * Failure to switch is indicated by the card holding + * dat[0:3] low + */ + if (host->ops->card_busy && host->ops->card_busy(host)) + err = -EAGAIN; + +power_cycle: + if (err) { + pr_debug("%s: Signal voltage switch failed, " + "power cycling card\n", mmc_hostname(host)); + mmc_power_cycle(host, ocr); + } + + return err; +} + +/* + * Select timing parameters for host. + */ +void mmc_set_timing(struct mmc_host *host, unsigned int timing) +{ + host->ios.timing = timing; + mmc_set_ios(host); +} + +/* + * Select appropriate driver type for host. + */ +void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type) +{ + host->ios.drv_type = drv_type; + mmc_set_ios(host); +} + +int mmc_select_drive_strength(struct mmc_card *card, unsigned int max_dtr, + int card_drv_type, int *drv_type) +{ + struct mmc_host *host = card->host; + int host_drv_type = SD_DRIVER_TYPE_B; + + *drv_type = 0; + + if (!host->ops->select_drive_strength) + return 0; + + /* Use SD definition of driver strength for hosts */ + if (host->caps & MMC_CAP_DRIVER_TYPE_A) + host_drv_type |= SD_DRIVER_TYPE_A; + + if (host->caps & MMC_CAP_DRIVER_TYPE_C) + host_drv_type |= SD_DRIVER_TYPE_C; + + if (host->caps & MMC_CAP_DRIVER_TYPE_D) + host_drv_type |= SD_DRIVER_TYPE_D; + + /* + * The drive strength that the hardware can support + * depends on the board design. Pass the appropriate + * information and let the hardware specific code + * return what is possible given the options + */ + return host->ops->select_drive_strength(card, max_dtr, + host_drv_type, + card_drv_type, + drv_type); +} + +/* + * Apply power to the MMC stack. This is a two-stage process. + * First, we enable power to the card without the clock running. + * We then wait a bit for the power to stabilise. Finally, + * enable the bus drivers and clock to the card. + * + * We must _NOT_ enable the clock prior to power stablising. + * + * If a host does all the power sequencing itself, ignore the + * initial MMC_POWER_UP stage. + */ +void mmc_power_up(struct mmc_host *host, u32 ocr) +{ + if (host->ios.power_mode == MMC_POWER_ON) + return; + + mmc_pwrseq_pre_power_on(host); + + host->ios.vdd = fls(ocr) - 1; + host->ios.power_mode = MMC_POWER_UP; + /* Set initial state and call mmc_set_ios */ + mmc_set_initial_state(host); + + mmc_set_initial_signal_voltage(host); + + /* + * This delay should be sufficient to allow the power supply + * to reach the minimum voltage. + */ + mmc_delay(host->ios.power_delay_ms); + + mmc_pwrseq_post_power_on(host); + + host->ios.clock = host->f_init; + + host->ios.power_mode = MMC_POWER_ON; + mmc_set_ios(host); + + /* + * This delay must be at least 74 clock sizes, or 1 ms, or the + * time required to reach a stable voltage. + */ + mmc_delay(host->ios.power_delay_ms); +} + +void mmc_power_off(struct mmc_host *host) +{ + if (host->ios.power_mode == MMC_POWER_OFF) + return; + + mmc_pwrseq_power_off(host); + + host->ios.clock = 0; + host->ios.vdd = 0; + + host->ios.power_mode = MMC_POWER_OFF; + /* Set initial state and call mmc_set_ios */ + mmc_set_initial_state(host); + + /* + * Some configurations, such as the 802.11 SDIO card in the OLPC + * XO-1.5, require a short delay after poweroff before the card + * can be successfully turned on again. + */ + mmc_delay(1); +} + +void mmc_power_cycle(struct mmc_host *host, u32 ocr) +{ + mmc_power_off(host); + /* Wait at least 1 ms according to SD spec */ + mmc_delay(1); + mmc_power_up(host, ocr); +} + +/* + * Cleanup when the last reference to the bus operator is dropped. + */ +static void __mmc_release_bus(struct mmc_host *host) +{ + WARN_ON(!host->bus_dead); + + host->bus_ops = NULL; +} + +/* + * Increase reference count of bus operator + */ +static inline void mmc_bus_get(struct mmc_host *host) +{ + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + host->bus_refs++; + spin_unlock_irqrestore(&host->lock, flags); +} + +/* + * Decrease reference count of bus operator and free it if + * it is the last reference. + */ +static inline void mmc_bus_put(struct mmc_host *host) +{ + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + host->bus_refs--; + if ((host->bus_refs == 0) && host->bus_ops) + __mmc_release_bus(host); + spin_unlock_irqrestore(&host->lock, flags); +} + +/* + * Assign a mmc bus handler to a host. Only one bus handler may control a + * host at any given time. + */ +void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops) +{ + unsigned long flags; + + WARN_ON(!host->claimed); + + spin_lock_irqsave(&host->lock, flags); + + WARN_ON(host->bus_ops); + WARN_ON(host->bus_refs); + + host->bus_ops = ops; + host->bus_refs = 1; + host->bus_dead = 0; + + spin_unlock_irqrestore(&host->lock, flags); +} + +/* + * Remove the current bus handler from a host. + */ +void mmc_detach_bus(struct mmc_host *host) +{ + unsigned long flags; + + WARN_ON(!host->claimed); + WARN_ON(!host->bus_ops); + + spin_lock_irqsave(&host->lock, flags); + + host->bus_dead = 1; + + spin_unlock_irqrestore(&host->lock, flags); + + mmc_bus_put(host); +} + +void _mmc_detect_change(struct mmc_host *host, unsigned long delay, bool cd_irq) +{ + /* + * Prevent system sleep for 5s to allow user space to consume the + * corresponding uevent. This is especially useful, when CD irq is used + * as a system wakeup, but doesn't hurt in other cases. + */ + if (cd_irq && !(host->caps & MMC_CAP_NEEDS_POLL)) + __pm_wakeup_event(host->ws, 5000); + + host->detect_change = 1; + mmc_schedule_delayed_work(&host->detect, delay); +} + +/** + * mmc_detect_change - process change of state on a MMC socket + * @host: host which changed state. + * @delay: optional delay to wait before detection (jiffies) + * + * MMC drivers should call this when they detect a card has been + * inserted or removed. The MMC layer will confirm that any + * present card is still functional, and initialize any newly + * inserted. + */ +void mmc_detect_change(struct mmc_host *host, unsigned long delay) +{ + _mmc_detect_change(host, delay, true); +} +EXPORT_SYMBOL(mmc_detect_change); + +void mmc_init_erase(struct mmc_card *card) +{ + unsigned int sz; + + if (is_power_of_2(card->erase_size)) + card->erase_shift = ffs(card->erase_size) - 1; + else + card->erase_shift = 0; + + /* + * It is possible to erase an arbitrarily large area of an SD or MMC + * card. That is not desirable because it can take a long time + * (minutes) potentially delaying more important I/O, and also the + * timeout calculations become increasingly hugely over-estimated. + * Consequently, 'pref_erase' is defined as a guide to limit erases + * to that size and alignment. + * + * For SD cards that define Allocation Unit size, limit erases to one + * Allocation Unit at a time. + * For MMC, have a stab at ai good value and for modern cards it will + * end up being 4MiB. Note that if the value is too small, it can end + * up taking longer to erase. Also note, erase_size is already set to + * High Capacity Erase Size if available when this function is called. + */ + if (mmc_card_sd(card) && card->ssr.au) { + card->pref_erase = card->ssr.au; + card->erase_shift = ffs(card->ssr.au) - 1; + } else if (card->erase_size) { + sz = (card->csd.capacity << (card->csd.read_blkbits - 9)) >> 11; + if (sz < 128) + card->pref_erase = 512 * 1024 / 512; + else if (sz < 512) + card->pref_erase = 1024 * 1024 / 512; + else if (sz < 1024) + card->pref_erase = 2 * 1024 * 1024 / 512; + else + card->pref_erase = 4 * 1024 * 1024 / 512; + if (card->pref_erase < card->erase_size) + card->pref_erase = card->erase_size; + else { + sz = card->pref_erase % card->erase_size; + if (sz) + card->pref_erase += card->erase_size - sz; + } + } else + card->pref_erase = 0; +} + +static bool is_trim_arg(unsigned int arg) +{ + return (arg & MMC_TRIM_OR_DISCARD_ARGS) && arg != MMC_DISCARD_ARG; +} + +static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card, + unsigned int arg, unsigned int qty) +{ + unsigned int erase_timeout; + + if (arg == MMC_DISCARD_ARG || + (arg == MMC_TRIM_ARG && card->ext_csd.rev >= 6)) { + erase_timeout = card->ext_csd.trim_timeout; + } else if (card->ext_csd.erase_group_def & 1) { + /* High Capacity Erase Group Size uses HC timeouts */ + if (arg == MMC_TRIM_ARG) + erase_timeout = card->ext_csd.trim_timeout; + else + erase_timeout = card->ext_csd.hc_erase_timeout; + } else { + /* CSD Erase Group Size uses write timeout */ + unsigned int mult = (10 << card->csd.r2w_factor); + unsigned int timeout_clks = card->csd.taac_clks * mult; + unsigned int timeout_us; + + /* Avoid overflow: e.g. taac_ns=80000000 mult=1280 */ + if (card->csd.taac_ns < 1000000) + timeout_us = (card->csd.taac_ns * mult) / 1000; + else + timeout_us = (card->csd.taac_ns / 1000) * mult; + + /* + * ios.clock is only a target. The real clock rate might be + * less but not that much less, so fudge it by multiplying by 2. + */ + timeout_clks <<= 1; + timeout_us += (timeout_clks * 1000) / + (card->host->ios.clock / 1000); + + erase_timeout = timeout_us / 1000; + + /* + * Theoretically, the calculation could underflow so round up + * to 1ms in that case. + */ + if (!erase_timeout) + erase_timeout = 1; + } + + /* Multiplier for secure operations */ + if (arg & MMC_SECURE_ARGS) { + if (arg == MMC_SECURE_ERASE_ARG) + erase_timeout *= card->ext_csd.sec_erase_mult; + else + erase_timeout *= card->ext_csd.sec_trim_mult; + } + + erase_timeout *= qty; + + /* + * Ensure at least a 1 second timeout for SPI as per + * 'mmc_set_data_timeout()' + */ + if (mmc_host_is_spi(card->host) && erase_timeout < 1000) + erase_timeout = 1000; + + return erase_timeout; +} + +static unsigned int mmc_sd_erase_timeout(struct mmc_card *card, + unsigned int arg, + unsigned int qty) +{ + unsigned int erase_timeout; + + /* for DISCARD none of the below calculation applies. + * the busy timeout is 250msec per discard command. + */ + if (arg == SD_DISCARD_ARG) + return SD_DISCARD_TIMEOUT_MS; + + if (card->ssr.erase_timeout) { + /* Erase timeout specified in SD Status Register (SSR) */ + erase_timeout = card->ssr.erase_timeout * qty + + card->ssr.erase_offset; + } else { + /* + * Erase timeout not specified in SD Status Register (SSR) so + * use 250ms per write block. + */ + erase_timeout = 250 * qty; + } + + /* Must not be less than 1 second */ + if (erase_timeout < 1000) + erase_timeout = 1000; + + return erase_timeout; +} + +static unsigned int mmc_erase_timeout(struct mmc_card *card, + unsigned int arg, + unsigned int qty) +{ + if (mmc_card_sd(card)) + return mmc_sd_erase_timeout(card, arg, qty); + else + return mmc_mmc_erase_timeout(card, arg, qty); +} + +static int mmc_do_erase(struct mmc_card *card, unsigned int from, + unsigned int to, unsigned int arg) +{ + struct mmc_command cmd = {}; + unsigned int qty = 0, busy_timeout = 0; + bool use_r1b_resp = false; + int err; + + mmc_retune_hold(card->host); + + /* + * qty is used to calculate the erase timeout which depends on how many + * erase groups (or allocation units in SD terminology) are affected. + * We count erasing part of an erase group as one erase group. + * For SD, the allocation units are always a power of 2. For MMC, the + * erase group size is almost certainly also power of 2, but it does not + * seem to insist on that in the JEDEC standard, so we fall back to + * division in that case. SD may not specify an allocation unit size, + * in which case the timeout is based on the number of write blocks. + * + * Note that the timeout for secure trim 2 will only be correct if the + * number of erase groups specified is the same as the total of all + * preceding secure trim 1 commands. Since the power may have been + * lost since the secure trim 1 commands occurred, it is generally + * impossible to calculate the secure trim 2 timeout correctly. + */ + if (card->erase_shift) + qty += ((to >> card->erase_shift) - + (from >> card->erase_shift)) + 1; + else if (mmc_card_sd(card)) + qty += to - from + 1; + else + qty += ((to / card->erase_size) - + (from / card->erase_size)) + 1; + + if (!mmc_card_blockaddr(card)) { + from <<= 9; + to <<= 9; + } + + if (mmc_card_sd(card)) + cmd.opcode = SD_ERASE_WR_BLK_START; + else + cmd.opcode = MMC_ERASE_GROUP_START; + cmd.arg = from; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + err = mmc_wait_for_cmd(card->host, &cmd, 0); + if (err) { + pr_err("mmc_erase: group start error %d, " + "status %#x\n", err, cmd.resp[0]); + err = -EIO; + goto out; + } + + memset(&cmd, 0, sizeof(struct mmc_command)); + if (mmc_card_sd(card)) + cmd.opcode = SD_ERASE_WR_BLK_END; + else + cmd.opcode = MMC_ERASE_GROUP_END; + cmd.arg = to; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + err = mmc_wait_for_cmd(card->host, &cmd, 0); + if (err) { + pr_err("mmc_erase: group end error %d, status %#x\n", + err, cmd.resp[0]); + err = -EIO; + goto out; + } + + memset(&cmd, 0, sizeof(struct mmc_command)); + cmd.opcode = MMC_ERASE; + cmd.arg = arg; + busy_timeout = mmc_erase_timeout(card, arg, qty); + /* + * If the host controller supports busy signalling and the timeout for + * the erase operation does not exceed the max_busy_timeout, we should + * use R1B response. Or we need to prevent the host from doing hw busy + * detection, which is done by converting to a R1 response instead. + * Note, some hosts requires R1B, which also means they are on their own + * when it comes to deal with the busy timeout. + */ + if (!(card->host->caps & MMC_CAP_NEED_RSP_BUSY) && + card->host->max_busy_timeout && + busy_timeout > card->host->max_busy_timeout) { + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + } else { + cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; + cmd.busy_timeout = busy_timeout; + use_r1b_resp = true; + } + + err = mmc_wait_for_cmd(card->host, &cmd, 0); + if (err) { + pr_err("mmc_erase: erase error %d, status %#x\n", + err, cmd.resp[0]); + err = -EIO; + goto out; + } + + if (mmc_host_is_spi(card->host)) + goto out; + + /* + * In case of when R1B + MMC_CAP_WAIT_WHILE_BUSY is used, the polling + * shall be avoided. + */ + if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp) + goto out; + + /* Let's poll to find out when the erase operation completes. */ + err = mmc_poll_for_busy(card, busy_timeout, MMC_BUSY_ERASE); + +out: + mmc_retune_release(card->host); + return err; +} + +static unsigned int mmc_align_erase_size(struct mmc_card *card, + unsigned int *from, + unsigned int *to, + unsigned int nr) +{ + unsigned int from_new = *from, nr_new = nr, rem; + + /* + * When the 'card->erase_size' is power of 2, we can use round_up/down() + * to align the erase size efficiently. + */ + if (is_power_of_2(card->erase_size)) { + unsigned int temp = from_new; + + from_new = round_up(temp, card->erase_size); + rem = from_new - temp; + + if (nr_new > rem) + nr_new -= rem; + else + return 0; + + nr_new = round_down(nr_new, card->erase_size); + } else { + rem = from_new % card->erase_size; + if (rem) { + rem = card->erase_size - rem; + from_new += rem; + if (nr_new > rem) + nr_new -= rem; + else + return 0; + } + + rem = nr_new % card->erase_size; + if (rem) + nr_new -= rem; + } + + if (nr_new == 0) + return 0; + + *to = from_new + nr_new; + *from = from_new; + + return nr_new; +} + +/** + * mmc_erase - erase sectors. + * @card: card to erase + * @from: first sector to erase + * @nr: number of sectors to erase + * @arg: erase command argument + * + * Caller must claim host before calling this function. + */ +int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr, + unsigned int arg) +{ + unsigned int rem, to = from + nr; + int err; + + if (!(card->csd.cmdclass & CCC_ERASE)) + return -EOPNOTSUPP; + + if (!card->erase_size) + return -EOPNOTSUPP; + + if (mmc_card_sd(card) && arg != SD_ERASE_ARG && arg != SD_DISCARD_ARG) + return -EOPNOTSUPP; + + if (mmc_card_mmc(card) && (arg & MMC_SECURE_ARGS) && + !(card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN)) + return -EOPNOTSUPP; + + if (mmc_card_mmc(card) && is_trim_arg(arg) && + !(card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN)) + return -EOPNOTSUPP; + + if (arg == MMC_SECURE_ERASE_ARG) { + if (from % card->erase_size || nr % card->erase_size) + return -EINVAL; + } + + if (arg == MMC_ERASE_ARG) + nr = mmc_align_erase_size(card, &from, &to, nr); + + if (nr == 0) + return 0; + + if (to <= from) + return -EINVAL; + + /* 'from' and 'to' are inclusive */ + to -= 1; + + /* + * Special case where only one erase-group fits in the timeout budget: + * If the region crosses an erase-group boundary on this particular + * case, we will be trimming more than one erase-group which, does not + * fit in the timeout budget of the controller, so we need to split it + * and call mmc_do_erase() twice if necessary. This special case is + * identified by the card->eg_boundary flag. + */ + rem = card->erase_size - (from % card->erase_size); + if ((arg & MMC_TRIM_OR_DISCARD_ARGS) && card->eg_boundary && nr > rem) { + err = mmc_do_erase(card, from, from + rem - 1, arg); + from += rem; + if ((err) || (to <= from)) + return err; + } + + return mmc_do_erase(card, from, to, arg); +} +EXPORT_SYMBOL(mmc_erase); + +int mmc_can_erase(struct mmc_card *card) +{ + if (card->csd.cmdclass & CCC_ERASE && card->erase_size) + return 1; + return 0; +} +EXPORT_SYMBOL(mmc_can_erase); + +int mmc_can_trim(struct mmc_card *card) +{ + if ((card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN) && + (!(card->quirks & MMC_QUIRK_TRIM_BROKEN))) + return 1; + return 0; +} +EXPORT_SYMBOL(mmc_can_trim); + +int mmc_can_discard(struct mmc_card *card) +{ + /* + * As there's no way to detect the discard support bit at v4.5 + * use the s/w feature support filed. + */ + if (card->ext_csd.feature_support & MMC_DISCARD_FEATURE) + return 1; + return 0; +} +EXPORT_SYMBOL(mmc_can_discard); + +int mmc_can_sanitize(struct mmc_card *card) +{ + if (!mmc_can_trim(card) && !mmc_can_erase(card)) + return 0; + if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_SANITIZE) + return 1; + return 0; +} + +int mmc_can_secure_erase_trim(struct mmc_card *card) +{ + if ((card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN) && + !(card->quirks & MMC_QUIRK_SEC_ERASE_TRIM_BROKEN)) + return 1; + return 0; +} +EXPORT_SYMBOL(mmc_can_secure_erase_trim); + +int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from, + unsigned int nr) +{ + if (!card->erase_size) + return 0; + if (from % card->erase_size || nr % card->erase_size) + return 0; + return 1; +} +EXPORT_SYMBOL(mmc_erase_group_aligned); + +static unsigned int mmc_do_calc_max_discard(struct mmc_card *card, + unsigned int arg) +{ + struct mmc_host *host = card->host; + unsigned int max_discard, x, y, qty = 0, max_qty, min_qty, timeout; + unsigned int last_timeout = 0; + unsigned int max_busy_timeout = host->max_busy_timeout ? + host->max_busy_timeout : MMC_ERASE_TIMEOUT_MS; + + if (card->erase_shift) { + max_qty = UINT_MAX >> card->erase_shift; + min_qty = card->pref_erase >> card->erase_shift; + } else if (mmc_card_sd(card)) { + max_qty = UINT_MAX; + min_qty = card->pref_erase; + } else { + max_qty = UINT_MAX / card->erase_size; + min_qty = card->pref_erase / card->erase_size; + } + + /* + * We should not only use 'host->max_busy_timeout' as the limitation + * when deciding the max discard sectors. We should set a balance value + * to improve the erase speed, and it can not get too long timeout at + * the same time. + * + * Here we set 'card->pref_erase' as the minimal discard sectors no + * matter what size of 'host->max_busy_timeout', but if the + * 'host->max_busy_timeout' is large enough for more discard sectors, + * then we can continue to increase the max discard sectors until we + * get a balance value. In cases when the 'host->max_busy_timeout' + * isn't specified, use the default max erase timeout. + */ + do { + y = 0; + for (x = 1; x && x <= max_qty && max_qty - x >= qty; x <<= 1) { + timeout = mmc_erase_timeout(card, arg, qty + x); + + if (qty + x > min_qty && timeout > max_busy_timeout) + break; + + if (timeout < last_timeout) + break; + last_timeout = timeout; + y = x; + } + qty += y; + } while (y); + + if (!qty) + return 0; + + /* + * When specifying a sector range to trim, chances are we might cross + * an erase-group boundary even if the amount of sectors is less than + * one erase-group. + * If we can only fit one erase-group in the controller timeout budget, + * we have to care that erase-group boundaries are not crossed by a + * single trim operation. We flag that special case with "eg_boundary". + * In all other cases we can just decrement qty and pretend that we + * always touch (qty + 1) erase-groups as a simple optimization. + */ + if (qty == 1) + card->eg_boundary = 1; + else + qty--; + + /* Convert qty to sectors */ + if (card->erase_shift) + max_discard = qty << card->erase_shift; + else if (mmc_card_sd(card)) + max_discard = qty + 1; + else + max_discard = qty * card->erase_size; + + return max_discard; +} + +unsigned int mmc_calc_max_discard(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + unsigned int max_discard, max_trim; + + /* + * Without erase_group_def set, MMC erase timeout depends on clock + * frequence which can change. In that case, the best choice is + * just the preferred erase size. + */ + if (mmc_card_mmc(card) && !(card->ext_csd.erase_group_def & 1)) + return card->pref_erase; + + max_discard = mmc_do_calc_max_discard(card, MMC_ERASE_ARG); + if (mmc_can_trim(card)) { + max_trim = mmc_do_calc_max_discard(card, MMC_TRIM_ARG); + if (max_trim < max_discard || max_discard == 0) + max_discard = max_trim; + } else if (max_discard < card->erase_size) { + max_discard = 0; + } + pr_debug("%s: calculated max. discard sectors %u for timeout %u ms\n", + mmc_hostname(host), max_discard, host->max_busy_timeout ? + host->max_busy_timeout : MMC_ERASE_TIMEOUT_MS); + return max_discard; +} +EXPORT_SYMBOL(mmc_calc_max_discard); + +bool mmc_card_is_blockaddr(struct mmc_card *card) +{ + return card ? mmc_card_blockaddr(card) : false; +} +EXPORT_SYMBOL(mmc_card_is_blockaddr); + +int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen) +{ + struct mmc_command cmd = {}; + + if (mmc_card_blockaddr(card) || mmc_card_ddr52(card) || + mmc_card_hs400(card) || mmc_card_hs400es(card)) + return 0; + + cmd.opcode = MMC_SET_BLOCKLEN; + cmd.arg = blocklen; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + return mmc_wait_for_cmd(card->host, &cmd, 5); +} +EXPORT_SYMBOL(mmc_set_blocklen); + +static void mmc_hw_reset_for_init(struct mmc_host *host) +{ + mmc_pwrseq_reset(host); + + if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset) + return; + host->ops->hw_reset(host); +} + +/** + * mmc_hw_reset - reset the card in hardware + * @host: MMC host to which the card is attached + * + * Hard reset the card. This function is only for upper layers, like the + * block layer or card drivers. You cannot use it in host drivers (struct + * mmc_card might be gone then). + * + * Return: 0 on success, -errno on failure + */ +int mmc_hw_reset(struct mmc_host *host) +{ + int ret; + + if (!host->card) + return -EINVAL; + + mmc_bus_get(host); + if (!host->bus_ops || host->bus_dead || !host->bus_ops->hw_reset) { + mmc_bus_put(host); + return -EOPNOTSUPP; + } + + ret = host->bus_ops->hw_reset(host); + mmc_bus_put(host); + + if (ret < 0) + pr_warn("%s: tried to HW reset card, got error %d\n", + mmc_hostname(host), ret); + + return ret; +} +EXPORT_SYMBOL(mmc_hw_reset); + +int mmc_sw_reset(struct mmc_host *host) +{ + int ret; + + if (!host->card) + return -EINVAL; + + mmc_bus_get(host); + if (!host->bus_ops || host->bus_dead || !host->bus_ops->sw_reset) { + mmc_bus_put(host); + return -EOPNOTSUPP; + } + + ret = host->bus_ops->sw_reset(host); + mmc_bus_put(host); + + if (ret) + pr_warn("%s: tried to SW reset card, got error %d\n", + mmc_hostname(host), ret); + + return ret; +} +EXPORT_SYMBOL(mmc_sw_reset); + +static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq) +{ + host->f_init = freq; + + pr_debug("%s: %s: trying to init card at %u Hz\n", + mmc_hostname(host), __func__, host->f_init); + + mmc_power_up(host, host->ocr_avail); + + /* + * Some eMMCs (with VCCQ always on) may not be reset after power up, so + * do a hardware reset if possible. + */ + mmc_hw_reset_for_init(host); + + /* + * sdio_reset sends CMD52 to reset card. Since we do not know + * if the card is being re-initialized, just send it. CMD52 + * should be ignored by SD/eMMC cards. + * Skip it if we already know that we do not support SDIO commands + */ + if (!(host->caps2 & MMC_CAP2_NO_SDIO)) + sdio_reset(host); + + mmc_go_idle(host); + + if (!(host->caps2 & MMC_CAP2_NO_SD)) + mmc_send_if_cond(host, host->ocr_avail); + + /* Order's important: probe SDIO, then SD, then MMC */ + if (!(host->caps2 & MMC_CAP2_NO_SDIO)) + if (!mmc_attach_sdio(host)) + return 0; + + if (!(host->caps2 & MMC_CAP2_NO_SD)) + if (!mmc_attach_sd(host)) + return 0; + + if (!(host->caps2 & MMC_CAP2_NO_MMC)) + if (!mmc_attach_mmc(host)) + return 0; + + mmc_power_off(host); + return -EIO; +} + +int _mmc_detect_card_removed(struct mmc_host *host) +{ + int ret; + + if (!host->card || mmc_card_removed(host->card)) + return 1; + + ret = host->bus_ops->alive(host); + + /* + * Card detect status and alive check may be out of sync if card is + * removed slowly, when card detect switch changes while card/slot + * pads are still contacted in hardware (refer to "SD Card Mechanical + * Addendum, Appendix C: Card Detection Switch"). So reschedule a + * detect work 200ms later for this case. + */ + if (!ret && host->ops->get_cd && !host->ops->get_cd(host)) { + mmc_detect_change(host, msecs_to_jiffies(200)); + pr_debug("%s: card removed too slowly\n", mmc_hostname(host)); + } + + if (ret) { + mmc_card_set_removed(host->card); + pr_debug("%s: card remove detected\n", mmc_hostname(host)); + } + + return ret; +} + +int mmc_detect_card_removed(struct mmc_host *host) +{ + struct mmc_card *card = host->card; + int ret; + + WARN_ON(!host->claimed); + + if (!card) + return 1; + + if (!mmc_card_is_removable(host)) + return 0; + + ret = mmc_card_removed(card); + /* + * The card will be considered unchanged unless we have been asked to + * detect a change or host requires polling to provide card detection. + */ + if (!host->detect_change && !(host->caps & MMC_CAP_NEEDS_POLL)) + return ret; + + host->detect_change = 0; + if (!ret) { + ret = _mmc_detect_card_removed(host); + if (ret && (host->caps & MMC_CAP_NEEDS_POLL)) { + /* + * Schedule a detect work as soon as possible to let a + * rescan handle the card removal. + */ + cancel_delayed_work(&host->detect); + _mmc_detect_change(host, 0, false); + } + } + + return ret; +} +EXPORT_SYMBOL(mmc_detect_card_removed); + +void mmc_rescan(struct work_struct *work) +{ + struct mmc_host *host = + container_of(work, struct mmc_host, detect.work); + int i; + + if (host->rescan_disable) + return; + + /* If there is a non-removable card registered, only scan once */ + if (!mmc_card_is_removable(host) && host->rescan_entered) + return; + host->rescan_entered = 1; + + if (host->trigger_card_event && host->ops->card_event) { + mmc_claim_host(host); + host->ops->card_event(host); + mmc_release_host(host); + host->trigger_card_event = false; + } + + mmc_bus_get(host); + + /* Verify a registered card to be functional, else remove it. */ + if (host->bus_ops && !host->bus_dead) + host->bus_ops->detect(host); + + host->detect_change = 0; + + /* + * Let mmc_bus_put() free the bus/bus_ops if we've found that + * the card is no longer present. + */ + mmc_bus_put(host); + mmc_bus_get(host); + + /* if there still is a card present, stop here */ + if (host->bus_ops != NULL) { + mmc_bus_put(host); + goto out; + } + + /* + * Only we can add a new handler, so it's safe to + * release the lock here. + */ + mmc_bus_put(host); + + mmc_claim_host(host); + if (mmc_card_is_removable(host) && host->ops->get_cd && + host->ops->get_cd(host) == 0) { + mmc_power_off(host); + mmc_release_host(host); + goto out; + } + + for (i = 0; i < ARRAY_SIZE(freqs); i++) { + unsigned int freq = freqs[i]; + if (freq > host->f_max) { + if (i + 1 < ARRAY_SIZE(freqs)) + continue; + freq = host->f_max; + } + if (!mmc_rescan_try_freq(host, max(freq, host->f_min))) + break; + if (freqs[i] <= host->f_min) + break; + } + mmc_release_host(host); + + out: + if (host->caps & MMC_CAP_NEEDS_POLL) + mmc_schedule_delayed_work(&host->detect, HZ); +} + +void mmc_start_host(struct mmc_host *host) +{ + host->f_init = max(min(freqs[0], host->f_max), host->f_min); + host->rescan_disable = 0; + + if (!(host->caps2 & MMC_CAP2_NO_PRESCAN_POWERUP)) { + mmc_claim_host(host); + mmc_power_up(host, host->ocr_avail); + mmc_release_host(host); + } + + mmc_gpiod_request_cd_irq(host); + _mmc_detect_change(host, 0, false); +} + +void __mmc_stop_host(struct mmc_host *host) +{ + if (host->slot.cd_irq >= 0) { + mmc_gpio_set_cd_wake(host, false); + disable_irq(host->slot.cd_irq); + } + + host->rescan_disable = 1; + cancel_delayed_work_sync(&host->detect); +} + +void mmc_stop_host(struct mmc_host *host) +{ + __mmc_stop_host(host); + + /* clear pm flags now and let card drivers set them as needed */ + host->pm_flags = 0; + + mmc_bus_get(host); + if (host->bus_ops && !host->bus_dead) { + /* Calling bus_ops->remove() with a claimed host can deadlock */ + host->bus_ops->remove(host); + mmc_claim_host(host); + mmc_detach_bus(host); + mmc_power_off(host); + mmc_release_host(host); + mmc_bus_put(host); + return; + } + mmc_bus_put(host); + + mmc_claim_host(host); + mmc_power_off(host); + mmc_release_host(host); +} + +static int __init mmc_init(void) +{ + int ret; + + ret = mmc_register_bus(); + if (ret) + return ret; + + ret = mmc_register_host_class(); + if (ret) + goto unregister_bus; + + ret = sdio_register_bus(); + if (ret) + goto unregister_host_class; + + return 0; + +unregister_host_class: + mmc_unregister_host_class(); +unregister_bus: + mmc_unregister_bus(); + return ret; +} + +static void __exit mmc_exit(void) +{ + sdio_unregister_bus(); + mmc_unregister_host_class(); + mmc_unregister_bus(); +} + +subsys_initcall(mmc_init); +module_exit(mmc_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h new file mode 100644 index 000000000..a6c814fdb --- /dev/null +++ b/drivers/mmc/core/core.h @@ -0,0 +1,176 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * linux/drivers/mmc/core/core.h + * + * Copyright (C) 2003 Russell King, All Rights Reserved. + * Copyright 2007 Pierre Ossman + */ +#ifndef _MMC_CORE_CORE_H +#define _MMC_CORE_CORE_H + +#include <linux/delay.h> +#include <linux/sched.h> + +struct mmc_host; +struct mmc_card; +struct mmc_request; + +#define MMC_CMD_RETRIES 3 + +struct mmc_bus_ops { + void (*remove)(struct mmc_host *); + void (*detect)(struct mmc_host *); + int (*pre_suspend)(struct mmc_host *); + int (*suspend)(struct mmc_host *); + int (*resume)(struct mmc_host *); + int (*runtime_suspend)(struct mmc_host *); + int (*runtime_resume)(struct mmc_host *); + int (*alive)(struct mmc_host *); + int (*shutdown)(struct mmc_host *); + int (*hw_reset)(struct mmc_host *); + int (*sw_reset)(struct mmc_host *); + bool (*cache_enabled)(struct mmc_host *); +}; + +void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops); +void mmc_detach_bus(struct mmc_host *host); + +struct device_node *mmc_of_find_child_device(struct mmc_host *host, + unsigned func_num); + +void mmc_init_erase(struct mmc_card *card); + +void mmc_set_chip_select(struct mmc_host *host, int mode); +void mmc_set_clock(struct mmc_host *host, unsigned int hz); +void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode); +void mmc_set_bus_width(struct mmc_host *host, unsigned int width); +u32 mmc_select_voltage(struct mmc_host *host, u32 ocr); +int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr); +int mmc_host_set_uhs_voltage(struct mmc_host *host); +int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage); +void mmc_set_initial_signal_voltage(struct mmc_host *host); +void mmc_set_timing(struct mmc_host *host, unsigned int timing); +void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type); +int mmc_select_drive_strength(struct mmc_card *card, unsigned int max_dtr, + int card_drv_type, int *drv_type); +void mmc_power_up(struct mmc_host *host, u32 ocr); +void mmc_power_off(struct mmc_host *host); +void mmc_power_cycle(struct mmc_host *host, u32 ocr); +void mmc_set_initial_state(struct mmc_host *host); +u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max); + +static inline void mmc_delay(unsigned int ms) +{ + if (ms <= 20) + usleep_range(ms * 1000, ms * 1250); + else + msleep(ms); +} + +void mmc_rescan(struct work_struct *work); +void mmc_start_host(struct mmc_host *host); +void __mmc_stop_host(struct mmc_host *host); +void mmc_stop_host(struct mmc_host *host); + +void _mmc_detect_change(struct mmc_host *host, unsigned long delay, + bool cd_irq); +int _mmc_detect_card_removed(struct mmc_host *host); +int mmc_detect_card_removed(struct mmc_host *host); + +int mmc_attach_mmc(struct mmc_host *host); +int mmc_attach_sd(struct mmc_host *host); +int mmc_attach_sdio(struct mmc_host *host); + +/* Module parameters */ +extern bool use_spi_crc; + +/* Debugfs information for hosts and cards */ +void mmc_add_host_debugfs(struct mmc_host *host); +void mmc_remove_host_debugfs(struct mmc_host *host); + +void mmc_add_card_debugfs(struct mmc_card *card); +void mmc_remove_card_debugfs(struct mmc_card *card); + +int mmc_execute_tuning(struct mmc_card *card); +int mmc_hs200_to_hs400(struct mmc_card *card); +int mmc_hs400_to_hs200(struct mmc_card *card); + +void mmc_wait_for_req_done(struct mmc_host *host, struct mmc_request *mrq); +bool mmc_is_req_done(struct mmc_host *host, struct mmc_request *mrq); + +int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq); + +int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr, + unsigned int arg); +int mmc_can_erase(struct mmc_card *card); +int mmc_can_trim(struct mmc_card *card); +int mmc_can_discard(struct mmc_card *card); +int mmc_can_sanitize(struct mmc_card *card); +int mmc_can_secure_erase_trim(struct mmc_card *card); +int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from, + unsigned int nr); +unsigned int mmc_calc_max_discard(struct mmc_card *card); + +int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen); + +int __mmc_claim_host(struct mmc_host *host, struct mmc_ctx *ctx, + atomic_t *abort); +void mmc_release_host(struct mmc_host *host); +void mmc_get_card(struct mmc_card *card, struct mmc_ctx *ctx); +void mmc_put_card(struct mmc_card *card, struct mmc_ctx *ctx); + +/** + * mmc_claim_host - exclusively claim a host + * @host: mmc host to claim + * + * Claim a host for a set of operations. + */ +static inline void mmc_claim_host(struct mmc_host *host) +{ + __mmc_claim_host(host, NULL, NULL); +} + +int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq); +void mmc_cqe_post_req(struct mmc_host *host, struct mmc_request *mrq); +int mmc_cqe_recovery(struct mmc_host *host); + +/** + * mmc_pre_req - Prepare for a new request + * @host: MMC host to prepare command + * @mrq: MMC request to prepare for + * + * mmc_pre_req() is called in prior to mmc_start_req() to let + * host prepare for the new request. Preparation of a request may be + * performed while another request is running on the host. + */ +static inline void mmc_pre_req(struct mmc_host *host, struct mmc_request *mrq) +{ + if (host->ops->pre_req) + host->ops->pre_req(host, mrq); +} + +/** + * mmc_post_req - Post process a completed request + * @host: MMC host to post process command + * @mrq: MMC request to post process for + * @err: Error, if non zero, clean up any resources made in pre_req + * + * Let the host post process a completed request. Post processing of + * a request may be performed while another request is running. + */ +static inline void mmc_post_req(struct mmc_host *host, struct mmc_request *mrq, + int err) +{ + if (host->ops->post_req) + host->ops->post_req(host, mrq, err); +} + +static inline bool mmc_cache_enabled(struct mmc_host *host) +{ + if (host->bus_ops->cache_enabled) + return host->bus_ops->cache_enabled(host); + + return false; +} + +#endif diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c new file mode 100644 index 000000000..9ec84c86c --- /dev/null +++ b/drivers/mmc/core/debugfs.c @@ -0,0 +1,270 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Debugfs support for hosts and cards + * + * Copyright (C) 2008 Atmel Corporation + */ +#include <linux/moduleparam.h> +#include <linux/export.h> +#include <linux/debugfs.h> +#include <linux/fs.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/stat.h> +#include <linux/fault-inject.h> + +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> + +#include "core.h" +#include "card.h" +#include "host.h" +#include "mmc_ops.h" + +#ifdef CONFIG_FAIL_MMC_REQUEST + +static DECLARE_FAULT_ATTR(fail_default_attr); +static char *fail_request; +module_param(fail_request, charp, 0); + +#endif /* CONFIG_FAIL_MMC_REQUEST */ + +/* The debugfs functions are optimized away when CONFIG_DEBUG_FS isn't set. */ +static int mmc_ios_show(struct seq_file *s, void *data) +{ + static const char *vdd_str[] = { + [8] = "2.0", + [9] = "2.1", + [10] = "2.2", + [11] = "2.3", + [12] = "2.4", + [13] = "2.5", + [14] = "2.6", + [15] = "2.7", + [16] = "2.8", + [17] = "2.9", + [18] = "3.0", + [19] = "3.1", + [20] = "3.2", + [21] = "3.3", + [22] = "3.4", + [23] = "3.5", + [24] = "3.6", + }; + struct mmc_host *host = s->private; + struct mmc_ios *ios = &host->ios; + const char *str; + + seq_printf(s, "clock:\t\t%u Hz\n", ios->clock); + if (host->actual_clock) + seq_printf(s, "actual clock:\t%u Hz\n", host->actual_clock); + seq_printf(s, "vdd:\t\t%u ", ios->vdd); + if ((1 << ios->vdd) & MMC_VDD_165_195) + seq_printf(s, "(1.65 - 1.95 V)\n"); + else if (ios->vdd < (ARRAY_SIZE(vdd_str) - 1) + && vdd_str[ios->vdd] && vdd_str[ios->vdd + 1]) + seq_printf(s, "(%s ~ %s V)\n", vdd_str[ios->vdd], + vdd_str[ios->vdd + 1]); + else + seq_printf(s, "(invalid)\n"); + + switch (ios->bus_mode) { + case MMC_BUSMODE_OPENDRAIN: + str = "open drain"; + break; + case MMC_BUSMODE_PUSHPULL: + str = "push-pull"; + break; + default: + str = "invalid"; + break; + } + seq_printf(s, "bus mode:\t%u (%s)\n", ios->bus_mode, str); + + switch (ios->chip_select) { + case MMC_CS_DONTCARE: + str = "don't care"; + break; + case MMC_CS_HIGH: + str = "active high"; + break; + case MMC_CS_LOW: + str = "active low"; + break; + default: + str = "invalid"; + break; + } + seq_printf(s, "chip select:\t%u (%s)\n", ios->chip_select, str); + + switch (ios->power_mode) { + case MMC_POWER_OFF: + str = "off"; + break; + case MMC_POWER_UP: + str = "up"; + break; + case MMC_POWER_ON: + str = "on"; + break; + default: + str = "invalid"; + break; + } + seq_printf(s, "power mode:\t%u (%s)\n", ios->power_mode, str); + seq_printf(s, "bus width:\t%u (%u bits)\n", + ios->bus_width, 1 << ios->bus_width); + + switch (ios->timing) { + case MMC_TIMING_LEGACY: + str = "legacy"; + break; + case MMC_TIMING_MMC_HS: + str = "mmc high-speed"; + break; + case MMC_TIMING_SD_HS: + str = "sd high-speed"; + break; + case MMC_TIMING_UHS_SDR12: + str = "sd uhs SDR12"; + break; + case MMC_TIMING_UHS_SDR25: + str = "sd uhs SDR25"; + break; + case MMC_TIMING_UHS_SDR50: + str = "sd uhs SDR50"; + break; + case MMC_TIMING_UHS_SDR104: + str = "sd uhs SDR104"; + break; + case MMC_TIMING_UHS_DDR50: + str = "sd uhs DDR50"; + break; + case MMC_TIMING_MMC_DDR52: + str = "mmc DDR52"; + break; + case MMC_TIMING_MMC_HS200: + str = "mmc HS200"; + break; + case MMC_TIMING_MMC_HS400: + str = mmc_card_hs400es(host->card) ? + "mmc HS400 enhanced strobe" : "mmc HS400"; + break; + default: + str = "invalid"; + break; + } + seq_printf(s, "timing spec:\t%u (%s)\n", ios->timing, str); + + switch (ios->signal_voltage) { + case MMC_SIGNAL_VOLTAGE_330: + str = "3.30 V"; + break; + case MMC_SIGNAL_VOLTAGE_180: + str = "1.80 V"; + break; + case MMC_SIGNAL_VOLTAGE_120: + str = "1.20 V"; + break; + default: + str = "invalid"; + break; + } + seq_printf(s, "signal voltage:\t%u (%s)\n", ios->signal_voltage, str); + + switch (ios->drv_type) { + case MMC_SET_DRIVER_TYPE_A: + str = "driver type A"; + break; + case MMC_SET_DRIVER_TYPE_B: + str = "driver type B"; + break; + case MMC_SET_DRIVER_TYPE_C: + str = "driver type C"; + break; + case MMC_SET_DRIVER_TYPE_D: + str = "driver type D"; + break; + default: + str = "invalid"; + break; + } + seq_printf(s, "driver type:\t%u (%s)\n", ios->drv_type, str); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(mmc_ios); + +static int mmc_clock_opt_get(void *data, u64 *val) +{ + struct mmc_host *host = data; + + *val = host->ios.clock; + + return 0; +} + +static int mmc_clock_opt_set(void *data, u64 val) +{ + struct mmc_host *host = data; + + /* We need this check due to input value is u64 */ + if (val != 0 && (val > host->f_max || val < host->f_min)) + return -EINVAL; + + mmc_claim_host(host); + mmc_set_clock(host, (unsigned int) val); + mmc_release_host(host); + + return 0; +} + +DEFINE_DEBUGFS_ATTRIBUTE(mmc_clock_fops, mmc_clock_opt_get, mmc_clock_opt_set, + "%llu\n"); + +void mmc_add_host_debugfs(struct mmc_host *host) +{ + struct dentry *root; + + root = debugfs_create_dir(mmc_hostname(host), NULL); + host->debugfs_root = root; + + debugfs_create_file("ios", S_IRUSR, root, host, &mmc_ios_fops); + debugfs_create_x32("caps", S_IRUSR, root, &host->caps); + debugfs_create_x32("caps2", S_IRUSR, root, &host->caps2); + debugfs_create_file_unsafe("clock", S_IRUSR | S_IWUSR, root, host, + &mmc_clock_fops); + +#ifdef CONFIG_FAIL_MMC_REQUEST + if (fail_request) + setup_fault_attr(&fail_default_attr, fail_request); + host->fail_mmc_request = fail_default_attr; + fault_create_debugfs_attr("fail_mmc_request", root, + &host->fail_mmc_request); +#endif +} + +void mmc_remove_host_debugfs(struct mmc_host *host) +{ + debugfs_remove_recursive(host->debugfs_root); +} + +void mmc_add_card_debugfs(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + struct dentry *root; + + if (!host->debugfs_root) + return; + + root = debugfs_create_dir(mmc_card_id(card), host->debugfs_root); + card->debugfs_root = root; + + debugfs_create_x32("state", S_IRUSR, root, &card->state); +} + +void mmc_remove_card_debugfs(struct mmc_card *card) +{ + debugfs_remove_recursive(card->debugfs_root); + card->debugfs_root = NULL; +} diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c new file mode 100644 index 000000000..b949a4468 --- /dev/null +++ b/drivers/mmc/core/host.c @@ -0,0 +1,620 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/mmc/core/host.c + * + * Copyright (C) 2003 Russell King, All Rights Reserved. + * Copyright (C) 2007-2008 Pierre Ossman + * Copyright (C) 2010 Linus Walleij + * + * MMC host class device management + */ + +#include <linux/device.h> +#include <linux/err.h> +#include <linux/idr.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/pagemap.h> +#include <linux/pm_wakeup.h> +#include <linux/export.h> +#include <linux/leds.h> +#include <linux/slab.h> + +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/slot-gpio.h> + +#include "core.h" +#include "host.h" +#include "slot-gpio.h" +#include "pwrseq.h" +#include "sdio_ops.h" + +#define cls_dev_to_mmc_host(d) container_of(d, struct mmc_host, class_dev) + +static DEFINE_IDA(mmc_host_ida); + +#ifdef CONFIG_PM_SLEEP +static int mmc_host_class_prepare(struct device *dev) +{ + struct mmc_host *host = cls_dev_to_mmc_host(dev); + + /* + * It's safe to access the bus_ops pointer, as both userspace and the + * workqueue for detecting cards are frozen at this point. + */ + if (!host->bus_ops) + return 0; + + /* Validate conditions for system suspend. */ + if (host->bus_ops->pre_suspend) + return host->bus_ops->pre_suspend(host); + + return 0; +} + +static void mmc_host_class_complete(struct device *dev) +{ + struct mmc_host *host = cls_dev_to_mmc_host(dev); + + _mmc_detect_change(host, 0, false); +} + +static const struct dev_pm_ops mmc_host_class_dev_pm_ops = { + .prepare = mmc_host_class_prepare, + .complete = mmc_host_class_complete, +}; + +#define MMC_HOST_CLASS_DEV_PM_OPS (&mmc_host_class_dev_pm_ops) +#else +#define MMC_HOST_CLASS_DEV_PM_OPS NULL +#endif + +static void mmc_host_classdev_release(struct device *dev) +{ + struct mmc_host *host = cls_dev_to_mmc_host(dev); + wakeup_source_unregister(host->ws); + if (of_alias_get_id(host->parent->of_node, "mmc") < 0) + ida_simple_remove(&mmc_host_ida, host->index); + kfree(host); +} + +static int mmc_host_classdev_shutdown(struct device *dev) +{ + struct mmc_host *host = cls_dev_to_mmc_host(dev); + + __mmc_stop_host(host); + return 0; +} + +static struct class mmc_host_class = { + .name = "mmc_host", + .dev_release = mmc_host_classdev_release, + .shutdown_pre = mmc_host_classdev_shutdown, + .pm = MMC_HOST_CLASS_DEV_PM_OPS, +}; + +int mmc_register_host_class(void) +{ + return class_register(&mmc_host_class); +} + +void mmc_unregister_host_class(void) +{ + class_unregister(&mmc_host_class); +} + +void mmc_retune_enable(struct mmc_host *host) +{ + host->can_retune = 1; + if (host->retune_period) + mod_timer(&host->retune_timer, + jiffies + host->retune_period * HZ); +} + +/* + * Pause re-tuning for a small set of operations. The pause begins after the + * next command and after first doing re-tuning. + */ +void mmc_retune_pause(struct mmc_host *host) +{ + if (!host->retune_paused) { + host->retune_paused = 1; + mmc_retune_needed(host); + mmc_retune_hold(host); + } +} +EXPORT_SYMBOL(mmc_retune_pause); + +void mmc_retune_unpause(struct mmc_host *host) +{ + if (host->retune_paused) { + host->retune_paused = 0; + mmc_retune_release(host); + } +} +EXPORT_SYMBOL(mmc_retune_unpause); + +void mmc_retune_disable(struct mmc_host *host) +{ + mmc_retune_unpause(host); + host->can_retune = 0; + del_timer_sync(&host->retune_timer); + host->retune_now = 0; + host->need_retune = 0; +} + +void mmc_retune_timer_stop(struct mmc_host *host) +{ + del_timer_sync(&host->retune_timer); +} +EXPORT_SYMBOL(mmc_retune_timer_stop); + +void mmc_retune_hold(struct mmc_host *host) +{ + if (!host->hold_retune) + host->retune_now = 1; + host->hold_retune += 1; +} + +void mmc_retune_release(struct mmc_host *host) +{ + if (host->hold_retune) + host->hold_retune -= 1; + else + WARN_ON(1); +} +EXPORT_SYMBOL(mmc_retune_release); + +int mmc_retune(struct mmc_host *host) +{ + bool return_to_hs400 = false; + int err; + + if (host->retune_now) + host->retune_now = 0; + else + return 0; + + if (!host->need_retune || host->doing_retune || !host->card) + return 0; + + host->need_retune = 0; + + host->doing_retune = 1; + + if (host->ios.timing == MMC_TIMING_MMC_HS400) { + err = mmc_hs400_to_hs200(host->card); + if (err) + goto out; + + return_to_hs400 = true; + } + + err = mmc_execute_tuning(host->card); + if (err) + goto out; + + if (return_to_hs400) + err = mmc_hs200_to_hs400(host->card); +out: + host->doing_retune = 0; + + return err; +} + +static void mmc_retune_timer(struct timer_list *t) +{ + struct mmc_host *host = from_timer(host, t, retune_timer); + + mmc_retune_needed(host); +} + +/** + * mmc_of_parse() - parse host's device-tree node + * @host: host whose node should be parsed. + * + * To keep the rest of the MMC subsystem unaware of whether DT has been + * used to to instantiate and configure this host instance or not, we + * parse the properties and set respective generic mmc-host flags and + * parameters. + */ +int mmc_of_parse(struct mmc_host *host) +{ + struct device *dev = host->parent; + u32 bus_width, drv_type, cd_debounce_delay_ms; + int ret; + + if (!dev || !dev_fwnode(dev)) + return 0; + + /* "bus-width" is translated to MMC_CAP_*_BIT_DATA flags */ + if (device_property_read_u32(dev, "bus-width", &bus_width) < 0) { + dev_dbg(host->parent, + "\"bus-width\" property is missing, assuming 1 bit.\n"); + bus_width = 1; + } + + switch (bus_width) { + case 8: + host->caps |= MMC_CAP_8_BIT_DATA; + fallthrough; /* Hosts capable of 8-bit can also do 4 bits */ + case 4: + host->caps |= MMC_CAP_4_BIT_DATA; + break; + case 1: + break; + default: + dev_err(host->parent, + "Invalid \"bus-width\" value %u!\n", bus_width); + return -EINVAL; + } + + /* f_max is obtained from the optional "max-frequency" property */ + device_property_read_u32(dev, "max-frequency", &host->f_max); + + /* + * Configure CD and WP pins. They are both by default active low to + * match the SDHCI spec. If GPIOs are provided for CD and / or WP, the + * mmc-gpio helpers are used to attach, configure and use them. If + * polarity inversion is specified in DT, one of MMC_CAP2_CD_ACTIVE_HIGH + * and MMC_CAP2_RO_ACTIVE_HIGH capability-2 flags is set. If the + * "broken-cd" property is provided, the MMC_CAP_NEEDS_POLL capability + * is set. If the "non-removable" property is found, the + * MMC_CAP_NONREMOVABLE capability is set and no card-detection + * configuration is performed. + */ + + /* Parse Card Detection */ + + if (device_property_read_bool(dev, "non-removable")) { + host->caps |= MMC_CAP_NONREMOVABLE; + } else { + if (device_property_read_bool(dev, "cd-inverted")) + host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; + + if (device_property_read_u32(dev, "cd-debounce-delay-ms", + &cd_debounce_delay_ms)) + cd_debounce_delay_ms = 200; + + if (device_property_read_bool(dev, "broken-cd")) + host->caps |= MMC_CAP_NEEDS_POLL; + + ret = mmc_gpiod_request_cd(host, "cd", 0, false, + cd_debounce_delay_ms * 1000); + if (!ret) + dev_info(host->parent, "Got CD GPIO\n"); + else if (ret != -ENOENT && ret != -ENOSYS) + return ret; + } + + /* Parse Write Protection */ + + if (device_property_read_bool(dev, "wp-inverted")) + host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + + ret = mmc_gpiod_request_ro(host, "wp", 0, 0); + if (!ret) + dev_info(host->parent, "Got WP GPIO\n"); + else if (ret != -ENOENT && ret != -ENOSYS) + return ret; + + if (device_property_read_bool(dev, "disable-wp")) + host->caps2 |= MMC_CAP2_NO_WRITE_PROTECT; + + if (device_property_read_bool(dev, "cap-sd-highspeed")) + host->caps |= MMC_CAP_SD_HIGHSPEED; + if (device_property_read_bool(dev, "cap-mmc-highspeed")) + host->caps |= MMC_CAP_MMC_HIGHSPEED; + if (device_property_read_bool(dev, "sd-uhs-sdr12")) + host->caps |= MMC_CAP_UHS_SDR12; + if (device_property_read_bool(dev, "sd-uhs-sdr25")) + host->caps |= MMC_CAP_UHS_SDR25; + if (device_property_read_bool(dev, "sd-uhs-sdr50")) + host->caps |= MMC_CAP_UHS_SDR50; + if (device_property_read_bool(dev, "sd-uhs-sdr104")) + host->caps |= MMC_CAP_UHS_SDR104; + if (device_property_read_bool(dev, "sd-uhs-ddr50")) + host->caps |= MMC_CAP_UHS_DDR50; + if (device_property_read_bool(dev, "cap-power-off-card")) + host->caps |= MMC_CAP_POWER_OFF_CARD; + if (device_property_read_bool(dev, "cap-mmc-hw-reset")) + host->caps |= MMC_CAP_HW_RESET; + if (device_property_read_bool(dev, "cap-sdio-irq")) + host->caps |= MMC_CAP_SDIO_IRQ; + if (device_property_read_bool(dev, "full-pwr-cycle")) + host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE; + if (device_property_read_bool(dev, "full-pwr-cycle-in-suspend")) + host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND; + if (device_property_read_bool(dev, "keep-power-in-suspend")) + host->pm_caps |= MMC_PM_KEEP_POWER; + if (device_property_read_bool(dev, "wakeup-source") || + device_property_read_bool(dev, "enable-sdio-wakeup")) /* legacy */ + host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ; + if (device_property_read_bool(dev, "mmc-ddr-3_3v")) + host->caps |= MMC_CAP_3_3V_DDR; + if (device_property_read_bool(dev, "mmc-ddr-1_8v")) + host->caps |= MMC_CAP_1_8V_DDR; + if (device_property_read_bool(dev, "mmc-ddr-1_2v")) + host->caps |= MMC_CAP_1_2V_DDR; + if (device_property_read_bool(dev, "mmc-hs200-1_8v")) + host->caps2 |= MMC_CAP2_HS200_1_8V_SDR; + if (device_property_read_bool(dev, "mmc-hs200-1_2v")) + host->caps2 |= MMC_CAP2_HS200_1_2V_SDR; + if (device_property_read_bool(dev, "mmc-hs400-1_8v")) + host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR; + if (device_property_read_bool(dev, "mmc-hs400-1_2v")) + host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR; + if (device_property_read_bool(dev, "mmc-hs400-enhanced-strobe")) + host->caps2 |= MMC_CAP2_HS400_ES; + if (device_property_read_bool(dev, "no-sdio")) + host->caps2 |= MMC_CAP2_NO_SDIO; + if (device_property_read_bool(dev, "no-sd")) + host->caps2 |= MMC_CAP2_NO_SD; + if (device_property_read_bool(dev, "no-mmc")) + host->caps2 |= MMC_CAP2_NO_MMC; + + /* Must be after "non-removable" check */ + if (device_property_read_u32(dev, "fixed-emmc-driver-type", &drv_type) == 0) { + if (host->caps & MMC_CAP_NONREMOVABLE) + host->fixed_drv_type = drv_type; + else + dev_err(host->parent, + "can't use fixed driver type, media is removable\n"); + } + + host->dsr_req = !device_property_read_u32(dev, "dsr", &host->dsr); + if (host->dsr_req && (host->dsr & ~0xffff)) { + dev_err(host->parent, + "device tree specified broken value for DSR: 0x%x, ignoring\n", + host->dsr); + host->dsr_req = 0; + } + + device_property_read_u32(dev, "post-power-on-delay-ms", + &host->ios.power_delay_ms); + + return mmc_pwrseq_alloc(host); +} + +EXPORT_SYMBOL(mmc_of_parse); + +/** + * mmc_of_parse_voltage - return mask of supported voltages + * @np: The device node need to be parsed. + * @mask: mask of voltages available for MMC/SD/SDIO + * + * Parse the "voltage-ranges" DT property, returning zero if it is not + * found, negative errno if the voltage-range specification is invalid, + * or one if the voltage-range is specified and successfully parsed. + */ +int mmc_of_parse_voltage(struct device_node *np, u32 *mask) +{ + const u32 *voltage_ranges; + int num_ranges, i; + + voltage_ranges = of_get_property(np, "voltage-ranges", &num_ranges); + if (!voltage_ranges) { + pr_debug("%pOF: voltage-ranges unspecified\n", np); + return 0; + } + num_ranges = num_ranges / sizeof(*voltage_ranges) / 2; + if (!num_ranges) { + pr_err("%pOF: voltage-ranges empty\n", np); + return -EINVAL; + } + + for (i = 0; i < num_ranges; i++) { + const int j = i * 2; + u32 ocr_mask; + + ocr_mask = mmc_vddrange_to_ocrmask( + be32_to_cpu(voltage_ranges[j]), + be32_to_cpu(voltage_ranges[j + 1])); + if (!ocr_mask) { + pr_err("%pOF: voltage-range #%d is invalid\n", + np, i); + return -EINVAL; + } + *mask |= ocr_mask; + } + + return 1; +} +EXPORT_SYMBOL(mmc_of_parse_voltage); + +/** + * mmc_first_nonreserved_index() - get the first index that is not reserved + */ +static int mmc_first_nonreserved_index(void) +{ + int max; + + max = of_alias_get_highest_id("mmc"); + if (max < 0) + return 0; + + return max + 1; +} + +/** + * mmc_alloc_host - initialise the per-host structure. + * @extra: sizeof private data structure + * @dev: pointer to host device model structure + * + * Initialise the per-host structure. + */ +struct mmc_host *mmc_alloc_host(int extra, struct device *dev) +{ + int index; + struct mmc_host *host; + int alias_id, min_idx, max_idx; + + host = kzalloc(sizeof(struct mmc_host) + extra, GFP_KERNEL); + if (!host) + return NULL; + + /* scanning will be enabled when we're ready */ + host->rescan_disable = 1; + + alias_id = of_alias_get_id(dev->of_node, "mmc"); + if (alias_id >= 0) { + index = alias_id; + } else { + min_idx = mmc_first_nonreserved_index(); + max_idx = 0; + + index = ida_simple_get(&mmc_host_ida, min_idx, max_idx, GFP_KERNEL); + if (index < 0) { + kfree(host); + return NULL; + } + } + + host->index = index; + + dev_set_name(&host->class_dev, "mmc%d", host->index); + host->ws = wakeup_source_register(NULL, dev_name(&host->class_dev)); + + host->parent = dev; + host->class_dev.parent = dev; + host->class_dev.class = &mmc_host_class; + device_initialize(&host->class_dev); + device_enable_async_suspend(&host->class_dev); + + if (mmc_gpio_alloc(host)) { + put_device(&host->class_dev); + return NULL; + } + + spin_lock_init(&host->lock); + init_waitqueue_head(&host->wq); + INIT_DELAYED_WORK(&host->detect, mmc_rescan); + INIT_DELAYED_WORK(&host->sdio_irq_work, sdio_irq_work); + timer_setup(&host->retune_timer, mmc_retune_timer, 0); + + /* + * By default, hosts do not support SGIO or large requests. + * They have to set these according to their abilities. + */ + host->max_segs = 1; + host->max_seg_size = PAGE_SIZE; + + host->max_req_size = PAGE_SIZE; + host->max_blk_size = 512; + host->max_blk_count = PAGE_SIZE / 512; + + host->fixed_drv_type = -EINVAL; + host->ios.power_delay_ms = 10; + host->ios.power_mode = MMC_POWER_UNDEFINED; + + return host; +} + +EXPORT_SYMBOL(mmc_alloc_host); + +static void devm_mmc_host_release(struct device *dev, void *res) +{ + mmc_free_host(*(struct mmc_host **)res); +} + +struct mmc_host *devm_mmc_alloc_host(struct device *dev, int extra) +{ + struct mmc_host **dr, *host; + + dr = devres_alloc(devm_mmc_host_release, sizeof(*dr), GFP_KERNEL); + if (!dr) + return ERR_PTR(-ENOMEM); + + host = mmc_alloc_host(extra, dev); + if (IS_ERR(host)) { + devres_free(dr); + return host; + } + + *dr = host; + devres_add(dev, dr); + + return host; +} +EXPORT_SYMBOL(devm_mmc_alloc_host); + +static int mmc_validate_host_caps(struct mmc_host *host) +{ + if (host->caps & MMC_CAP_SDIO_IRQ && !host->ops->enable_sdio_irq) { + dev_warn(host->parent, "missing ->enable_sdio_irq() ops\n"); + return -EINVAL; + } + + return 0; +} + +/** + * mmc_add_host - initialise host hardware + * @host: mmc host + * + * Register the host with the driver model. The host must be + * prepared to start servicing requests before this function + * completes. + */ +int mmc_add_host(struct mmc_host *host) +{ + int err; + + err = mmc_validate_host_caps(host); + if (err) + return err; + + err = device_add(&host->class_dev); + if (err) + return err; + + led_trigger_register_simple(dev_name(&host->class_dev), &host->led); + +#ifdef CONFIG_DEBUG_FS + mmc_add_host_debugfs(host); +#endif + + mmc_start_host(host); + return 0; +} + +EXPORT_SYMBOL(mmc_add_host); + +/** + * mmc_remove_host - remove host hardware + * @host: mmc host + * + * Unregister and remove all cards associated with this host, + * and power down the MMC bus. No new requests will be issued + * after this function has returned. + */ +void mmc_remove_host(struct mmc_host *host) +{ + mmc_stop_host(host); + +#ifdef CONFIG_DEBUG_FS + mmc_remove_host_debugfs(host); +#endif + + device_del(&host->class_dev); + + led_trigger_unregister_simple(host->led); +} + +EXPORT_SYMBOL(mmc_remove_host); + +/** + * mmc_free_host - free the host structure + * @host: mmc host + * + * Free the host once all references to it have been dropped. + */ +void mmc_free_host(struct mmc_host *host) +{ + cancel_delayed_work_sync(&host->detect); + mmc_pwrseq_free(host); + put_device(&host->class_dev); +} + +EXPORT_SYMBOL(mmc_free_host); diff --git a/drivers/mmc/core/host.h b/drivers/mmc/core/host.h new file mode 100644 index 000000000..5e3b9534f --- /dev/null +++ b/drivers/mmc/core/host.h @@ -0,0 +1,81 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * linux/drivers/mmc/core/host.h + * + * Copyright (C) 2003 Russell King, All Rights Reserved. + * Copyright 2007 Pierre Ossman + */ +#ifndef _MMC_CORE_HOST_H +#define _MMC_CORE_HOST_H + +#include <linux/mmc/host.h> + +int mmc_register_host_class(void); +void mmc_unregister_host_class(void); + +void mmc_retune_enable(struct mmc_host *host); +void mmc_retune_disable(struct mmc_host *host); +void mmc_retune_hold(struct mmc_host *host); +void mmc_retune_release(struct mmc_host *host); +int mmc_retune(struct mmc_host *host); +void mmc_retune_pause(struct mmc_host *host); +void mmc_retune_unpause(struct mmc_host *host); + +static inline void mmc_retune_hold_now(struct mmc_host *host) +{ + host->retune_now = 0; + host->hold_retune += 1; +} + +static inline void mmc_retune_recheck(struct mmc_host *host) +{ + if (host->hold_retune <= 1) + host->retune_now = 1; +} + +static inline int mmc_host_cmd23(struct mmc_host *host) +{ + return host->caps & MMC_CAP_CMD23; +} + +static inline bool mmc_host_done_complete(struct mmc_host *host) +{ + return host->caps & MMC_CAP_DONE_COMPLETE; +} + +static inline int mmc_boot_partition_access(struct mmc_host *host) +{ + return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC); +} + +static inline int mmc_host_uhs(struct mmc_host *host) +{ + return host->caps & + (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_DDR50) && + host->caps & MMC_CAP_4_BIT_DATA; +} + +static inline bool mmc_card_hs200(struct mmc_card *card) +{ + return card->host->ios.timing == MMC_TIMING_MMC_HS200; +} + +static inline bool mmc_card_ddr52(struct mmc_card *card) +{ + return card->host->ios.timing == MMC_TIMING_MMC_DDR52; +} + +static inline bool mmc_card_hs400(struct mmc_card *card) +{ + return card->host->ios.timing == MMC_TIMING_MMC_HS400; +} + +static inline bool mmc_card_hs400es(struct mmc_card *card) +{ + return card->host->ios.enhanced_strobe; +} + +#endif + diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c new file mode 100644 index 000000000..87807ef01 --- /dev/null +++ b/drivers/mmc/core/mmc.c @@ -0,0 +1,2306 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/mmc/core/mmc.c + * + * Copyright (C) 2003-2004 Russell King, All Rights Reserved. + * Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved. + * MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved. + */ + +#include <linux/err.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/stat.h> +#include <linux/pm_runtime.h> + +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/mmc.h> + +#include "core.h" +#include "card.h" +#include "host.h" +#include "bus.h" +#include "mmc_ops.h" +#include "quirks.h" +#include "sd_ops.h" +#include "pwrseq.h" + +#define DEFAULT_CMD6_TIMEOUT_MS 500 +#define MIN_CACHE_EN_TIMEOUT_MS 1600 + +static const unsigned int tran_exp[] = { + 10000, 100000, 1000000, 10000000, + 0, 0, 0, 0 +}; + +static const unsigned char tran_mant[] = { + 0, 10, 12, 13, 15, 20, 25, 30, + 35, 40, 45, 50, 55, 60, 70, 80, +}; + +static const unsigned int taac_exp[] = { + 1, 10, 100, 1000, 10000, 100000, 1000000, 10000000, +}; + +static const unsigned int taac_mant[] = { + 0, 10, 12, 13, 15, 20, 25, 30, + 35, 40, 45, 50, 55, 60, 70, 80, +}; + +#define UNSTUFF_BITS(resp,start,size) \ + ({ \ + const int __size = size; \ + const u32 __mask = (__size < 32 ? 1 << __size : 0) - 1; \ + const int __off = 3 - ((start) / 32); \ + const int __shft = (start) & 31; \ + u32 __res; \ + \ + __res = resp[__off] >> __shft; \ + if (__size + __shft > 32) \ + __res |= resp[__off-1] << ((32 - __shft) % 32); \ + __res & __mask; \ + }) + +/* + * Given the decoded CSD structure, decode the raw CID to our CID structure. + */ +static int mmc_decode_cid(struct mmc_card *card) +{ + u32 *resp = card->raw_cid; + + /* + * The selection of the format here is based upon published + * specs from sandisk and from what people have reported. + */ + switch (card->csd.mmca_vsn) { + case 0: /* MMC v1.0 - v1.2 */ + case 1: /* MMC v1.4 */ + card->cid.manfid = UNSTUFF_BITS(resp, 104, 24); + card->cid.prod_name[0] = UNSTUFF_BITS(resp, 96, 8); + card->cid.prod_name[1] = UNSTUFF_BITS(resp, 88, 8); + card->cid.prod_name[2] = UNSTUFF_BITS(resp, 80, 8); + card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8); + card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8); + card->cid.prod_name[5] = UNSTUFF_BITS(resp, 56, 8); + card->cid.prod_name[6] = UNSTUFF_BITS(resp, 48, 8); + card->cid.hwrev = UNSTUFF_BITS(resp, 44, 4); + card->cid.fwrev = UNSTUFF_BITS(resp, 40, 4); + card->cid.serial = UNSTUFF_BITS(resp, 16, 24); + card->cid.month = UNSTUFF_BITS(resp, 12, 4); + card->cid.year = UNSTUFF_BITS(resp, 8, 4) + 1997; + break; + + case 2: /* MMC v2.0 - v2.2 */ + case 3: /* MMC v3.1 - v3.3 */ + case 4: /* MMC v4 */ + card->cid.manfid = UNSTUFF_BITS(resp, 120, 8); + card->cid.oemid = UNSTUFF_BITS(resp, 104, 16); + card->cid.prod_name[0] = UNSTUFF_BITS(resp, 96, 8); + card->cid.prod_name[1] = UNSTUFF_BITS(resp, 88, 8); + card->cid.prod_name[2] = UNSTUFF_BITS(resp, 80, 8); + card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8); + card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8); + card->cid.prod_name[5] = UNSTUFF_BITS(resp, 56, 8); + card->cid.prv = UNSTUFF_BITS(resp, 48, 8); + card->cid.serial = UNSTUFF_BITS(resp, 16, 32); + card->cid.month = UNSTUFF_BITS(resp, 12, 4); + card->cid.year = UNSTUFF_BITS(resp, 8, 4) + 1997; + break; + + default: + pr_err("%s: card has unknown MMCA version %d\n", + mmc_hostname(card->host), card->csd.mmca_vsn); + return -EINVAL; + } + + return 0; +} + +static void mmc_set_erase_size(struct mmc_card *card) +{ + if (card->ext_csd.erase_group_def & 1) + card->erase_size = card->ext_csd.hc_erase_size; + else + card->erase_size = card->csd.erase_size; + + mmc_init_erase(card); +} + +/* + * Given a 128-bit response, decode to our card CSD structure. + */ +static int mmc_decode_csd(struct mmc_card *card) +{ + struct mmc_csd *csd = &card->csd; + unsigned int e, m, a, b; + u32 *resp = card->raw_csd; + + /* + * We only understand CSD structure v1.1 and v1.2. + * v1.2 has extra information in bits 15, 11 and 10. + * We also support eMMC v4.4 & v4.41. + */ + csd->structure = UNSTUFF_BITS(resp, 126, 2); + if (csd->structure == 0) { + pr_err("%s: unrecognised CSD structure version %d\n", + mmc_hostname(card->host), csd->structure); + return -EINVAL; + } + + csd->mmca_vsn = UNSTUFF_BITS(resp, 122, 4); + m = UNSTUFF_BITS(resp, 115, 4); + e = UNSTUFF_BITS(resp, 112, 3); + csd->taac_ns = (taac_exp[e] * taac_mant[m] + 9) / 10; + csd->taac_clks = UNSTUFF_BITS(resp, 104, 8) * 100; + + m = UNSTUFF_BITS(resp, 99, 4); + e = UNSTUFF_BITS(resp, 96, 3); + csd->max_dtr = tran_exp[e] * tran_mant[m]; + csd->cmdclass = UNSTUFF_BITS(resp, 84, 12); + + e = UNSTUFF_BITS(resp, 47, 3); + m = UNSTUFF_BITS(resp, 62, 12); + csd->capacity = (1 + m) << (e + 2); + + csd->read_blkbits = UNSTUFF_BITS(resp, 80, 4); + csd->read_partial = UNSTUFF_BITS(resp, 79, 1); + csd->write_misalign = UNSTUFF_BITS(resp, 78, 1); + csd->read_misalign = UNSTUFF_BITS(resp, 77, 1); + csd->dsr_imp = UNSTUFF_BITS(resp, 76, 1); + csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3); + csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4); + csd->write_partial = UNSTUFF_BITS(resp, 21, 1); + + if (csd->write_blkbits >= 9) { + a = UNSTUFF_BITS(resp, 42, 5); + b = UNSTUFF_BITS(resp, 37, 5); + csd->erase_size = (a + 1) * (b + 1); + csd->erase_size <<= csd->write_blkbits - 9; + } + + return 0; +} + +static void mmc_select_card_type(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + u8 card_type = card->ext_csd.raw_card_type; + u32 caps = host->caps, caps2 = host->caps2; + unsigned int hs_max_dtr = 0, hs200_max_dtr = 0; + unsigned int avail_type = 0; + + if (caps & MMC_CAP_MMC_HIGHSPEED && + card_type & EXT_CSD_CARD_TYPE_HS_26) { + hs_max_dtr = MMC_HIGH_26_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS_26; + } + + if (caps & MMC_CAP_MMC_HIGHSPEED && + card_type & EXT_CSD_CARD_TYPE_HS_52) { + hs_max_dtr = MMC_HIGH_52_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS_52; + } + + if (caps & (MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR) && + card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) { + hs_max_dtr = MMC_HIGH_DDR_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_DDR_1_8V; + } + + if (caps & MMC_CAP_1_2V_DDR && + card_type & EXT_CSD_CARD_TYPE_DDR_1_2V) { + hs_max_dtr = MMC_HIGH_DDR_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_DDR_1_2V; + } + + if (caps2 & MMC_CAP2_HS200_1_8V_SDR && + card_type & EXT_CSD_CARD_TYPE_HS200_1_8V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS200_1_8V; + } + + if (caps2 & MMC_CAP2_HS200_1_2V_SDR && + card_type & EXT_CSD_CARD_TYPE_HS200_1_2V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS200_1_2V; + } + + if (caps2 & MMC_CAP2_HS400_1_8V && + card_type & EXT_CSD_CARD_TYPE_HS400_1_8V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS400_1_8V; + } + + if (caps2 & MMC_CAP2_HS400_1_2V && + card_type & EXT_CSD_CARD_TYPE_HS400_1_2V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS400_1_2V; + } + + if ((caps2 & MMC_CAP2_HS400_ES) && + card->ext_csd.strobe_support && + (avail_type & EXT_CSD_CARD_TYPE_HS400)) + avail_type |= EXT_CSD_CARD_TYPE_HS400ES; + + card->ext_csd.hs_max_dtr = hs_max_dtr; + card->ext_csd.hs200_max_dtr = hs200_max_dtr; + card->mmc_avail_type = avail_type; +} + +static void mmc_manage_enhanced_area(struct mmc_card *card, u8 *ext_csd) +{ + u8 hc_erase_grp_sz, hc_wp_grp_sz; + + /* + * Disable these attributes by default + */ + card->ext_csd.enhanced_area_offset = -EINVAL; + card->ext_csd.enhanced_area_size = -EINVAL; + + /* + * Enhanced area feature support -- check whether the eMMC + * card has the Enhanced area enabled. If so, export enhanced + * area offset and size to user by adding sysfs interface. + */ + if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) && + (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) { + if (card->ext_csd.partition_setting_completed) { + hc_erase_grp_sz = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; + hc_wp_grp_sz = + ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; + + /* + * calculate the enhanced data area offset, in bytes + */ + card->ext_csd.enhanced_area_offset = + (((unsigned long long)ext_csd[139]) << 24) + + (((unsigned long long)ext_csd[138]) << 16) + + (((unsigned long long)ext_csd[137]) << 8) + + (((unsigned long long)ext_csd[136])); + if (mmc_card_blockaddr(card)) + card->ext_csd.enhanced_area_offset <<= 9; + /* + * calculate the enhanced data area size, in kilobytes + */ + card->ext_csd.enhanced_area_size = + (ext_csd[142] << 16) + (ext_csd[141] << 8) + + ext_csd[140]; + card->ext_csd.enhanced_area_size *= + (size_t)(hc_erase_grp_sz * hc_wp_grp_sz); + card->ext_csd.enhanced_area_size <<= 9; + } else { + pr_warn("%s: defines enhanced area without partition setting complete\n", + mmc_hostname(card->host)); + } + } +} + +static void mmc_part_add(struct mmc_card *card, u64 size, + unsigned int part_cfg, char *name, int idx, bool ro, + int area_type) +{ + card->part[card->nr_parts].size = size; + card->part[card->nr_parts].part_cfg = part_cfg; + sprintf(card->part[card->nr_parts].name, name, idx); + card->part[card->nr_parts].force_ro = ro; + card->part[card->nr_parts].area_type = area_type; + card->nr_parts++; +} + +static void mmc_manage_gp_partitions(struct mmc_card *card, u8 *ext_csd) +{ + int idx; + u8 hc_erase_grp_sz, hc_wp_grp_sz; + u64 part_size; + + /* + * General purpose partition feature support -- + * If ext_csd has the size of general purpose partitions, + * set size, part_cfg, partition name in mmc_part. + */ + if (ext_csd[EXT_CSD_PARTITION_SUPPORT] & + EXT_CSD_PART_SUPPORT_PART_EN) { + hc_erase_grp_sz = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; + hc_wp_grp_sz = + ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; + + for (idx = 0; idx < MMC_NUM_GP_PARTITION; idx++) { + if (!ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3] && + !ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 1] && + !ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 2]) + continue; + if (card->ext_csd.partition_setting_completed == 0) { + pr_warn("%s: has partition size defined without partition complete\n", + mmc_hostname(card->host)); + break; + } + part_size = + (ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 2] + << 16) + + (ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 1] + << 8) + + ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3]; + part_size *= (hc_erase_grp_sz * hc_wp_grp_sz); + mmc_part_add(card, part_size << 19, + EXT_CSD_PART_CONFIG_ACC_GP0 + idx, + "gp%d", idx, false, + MMC_BLK_DATA_AREA_GP); + } + } +} + +/* Minimum partition switch timeout in milliseconds */ +#define MMC_MIN_PART_SWITCH_TIME 300 + +/* + * Decode extended CSD. + */ +static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd) +{ + int err = 0, idx; + u64 part_size; + struct device_node *np; + bool broken_hpi = false; + + /* Version is coded in the CSD_STRUCTURE byte in the EXT_CSD register */ + card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE]; + if (card->csd.structure == 3) { + if (card->ext_csd.raw_ext_csd_structure > 2) { + pr_err("%s: unrecognised EXT_CSD structure " + "version %d\n", mmc_hostname(card->host), + card->ext_csd.raw_ext_csd_structure); + err = -EINVAL; + goto out; + } + } + + np = mmc_of_find_child_device(card->host, 0); + if (np && of_device_is_compatible(np, "mmc-card")) + broken_hpi = of_property_read_bool(np, "broken-hpi"); + of_node_put(np); + + /* + * The EXT_CSD format is meant to be forward compatible. As long + * as CSD_STRUCTURE does not change, all values for EXT_CSD_REV + * are authorized, see JEDEC JESD84-B50 section B.8. + */ + card->ext_csd.rev = ext_csd[EXT_CSD_REV]; + + /* fixup device after ext_csd revision field is updated */ + mmc_fixup_device(card, mmc_ext_csd_fixups); + + card->ext_csd.raw_sectors[0] = ext_csd[EXT_CSD_SEC_CNT + 0]; + card->ext_csd.raw_sectors[1] = ext_csd[EXT_CSD_SEC_CNT + 1]; + card->ext_csd.raw_sectors[2] = ext_csd[EXT_CSD_SEC_CNT + 2]; + card->ext_csd.raw_sectors[3] = ext_csd[EXT_CSD_SEC_CNT + 3]; + if (card->ext_csd.rev >= 2) { + card->ext_csd.sectors = + ext_csd[EXT_CSD_SEC_CNT + 0] << 0 | + ext_csd[EXT_CSD_SEC_CNT + 1] << 8 | + ext_csd[EXT_CSD_SEC_CNT + 2] << 16 | + ext_csd[EXT_CSD_SEC_CNT + 3] << 24; + + /* Cards with density > 2GiB are sector addressed */ + if (card->ext_csd.sectors > (2u * 1024 * 1024 * 1024) / 512) + mmc_card_set_blockaddr(card); + } + + card->ext_csd.strobe_support = ext_csd[EXT_CSD_STROBE_SUPPORT]; + card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE]; + mmc_select_card_type(card); + + card->ext_csd.raw_s_a_timeout = ext_csd[EXT_CSD_S_A_TIMEOUT]; + card->ext_csd.raw_erase_timeout_mult = + ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]; + card->ext_csd.raw_hc_erase_grp_size = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; + if (card->ext_csd.rev >= 3) { + u8 sa_shift = ext_csd[EXT_CSD_S_A_TIMEOUT]; + card->ext_csd.part_config = ext_csd[EXT_CSD_PART_CONFIG]; + + /* EXT_CSD value is in units of 10ms, but we store in ms */ + card->ext_csd.part_time = 10 * ext_csd[EXT_CSD_PART_SWITCH_TIME]; + + /* Sleep / awake timeout in 100ns units */ + if (sa_shift > 0 && sa_shift <= 0x17) + card->ext_csd.sa_timeout = + 1 << ext_csd[EXT_CSD_S_A_TIMEOUT]; + card->ext_csd.erase_group_def = + ext_csd[EXT_CSD_ERASE_GROUP_DEF]; + card->ext_csd.hc_erase_timeout = 300 * + ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]; + card->ext_csd.hc_erase_size = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] << 10; + + card->ext_csd.rel_sectors = ext_csd[EXT_CSD_REL_WR_SEC_C]; + + /* + * There are two boot regions of equal size, defined in + * multiples of 128K. + */ + if (ext_csd[EXT_CSD_BOOT_MULT] && mmc_boot_partition_access(card->host)) { + for (idx = 0; idx < MMC_NUM_BOOT_PARTITION; idx++) { + part_size = ext_csd[EXT_CSD_BOOT_MULT] << 17; + mmc_part_add(card, part_size, + EXT_CSD_PART_CONFIG_ACC_BOOT0 + idx, + "boot%d", idx, true, + MMC_BLK_DATA_AREA_BOOT); + } + } + } + + card->ext_csd.raw_hc_erase_gap_size = + ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; + card->ext_csd.raw_sec_trim_mult = + ext_csd[EXT_CSD_SEC_TRIM_MULT]; + card->ext_csd.raw_sec_erase_mult = + ext_csd[EXT_CSD_SEC_ERASE_MULT]; + card->ext_csd.raw_sec_feature_support = + ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]; + card->ext_csd.raw_trim_mult = + ext_csd[EXT_CSD_TRIM_MULT]; + card->ext_csd.raw_partition_support = ext_csd[EXT_CSD_PARTITION_SUPPORT]; + card->ext_csd.raw_driver_strength = ext_csd[EXT_CSD_DRIVER_STRENGTH]; + if (card->ext_csd.rev >= 4) { + if (ext_csd[EXT_CSD_PARTITION_SETTING_COMPLETED] & + EXT_CSD_PART_SETTING_COMPLETED) + card->ext_csd.partition_setting_completed = 1; + else + card->ext_csd.partition_setting_completed = 0; + + mmc_manage_enhanced_area(card, ext_csd); + + mmc_manage_gp_partitions(card, ext_csd); + + card->ext_csd.sec_trim_mult = + ext_csd[EXT_CSD_SEC_TRIM_MULT]; + card->ext_csd.sec_erase_mult = + ext_csd[EXT_CSD_SEC_ERASE_MULT]; + card->ext_csd.sec_feature_support = + ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]; + card->ext_csd.trim_timeout = 300 * + ext_csd[EXT_CSD_TRIM_MULT]; + + /* + * Note that the call to mmc_part_add above defaults to read + * only. If this default assumption is changed, the call must + * take into account the value of boot_locked below. + */ + card->ext_csd.boot_ro_lock = ext_csd[EXT_CSD_BOOT_WP]; + card->ext_csd.boot_ro_lockable = true; + + /* Save power class values */ + card->ext_csd.raw_pwr_cl_52_195 = + ext_csd[EXT_CSD_PWR_CL_52_195]; + card->ext_csd.raw_pwr_cl_26_195 = + ext_csd[EXT_CSD_PWR_CL_26_195]; + card->ext_csd.raw_pwr_cl_52_360 = + ext_csd[EXT_CSD_PWR_CL_52_360]; + card->ext_csd.raw_pwr_cl_26_360 = + ext_csd[EXT_CSD_PWR_CL_26_360]; + card->ext_csd.raw_pwr_cl_200_195 = + ext_csd[EXT_CSD_PWR_CL_200_195]; + card->ext_csd.raw_pwr_cl_200_360 = + ext_csd[EXT_CSD_PWR_CL_200_360]; + card->ext_csd.raw_pwr_cl_ddr_52_195 = + ext_csd[EXT_CSD_PWR_CL_DDR_52_195]; + card->ext_csd.raw_pwr_cl_ddr_52_360 = + ext_csd[EXT_CSD_PWR_CL_DDR_52_360]; + card->ext_csd.raw_pwr_cl_ddr_200_360 = + ext_csd[EXT_CSD_PWR_CL_DDR_200_360]; + } + + if (card->ext_csd.rev >= 5) { + /* Adjust production date as per JEDEC JESD84-B451 */ + if (card->cid.year < 2010) + card->cid.year += 16; + + /* check whether the eMMC card supports BKOPS */ + if (ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) { + card->ext_csd.bkops = 1; + card->ext_csd.man_bkops_en = + (ext_csd[EXT_CSD_BKOPS_EN] & + EXT_CSD_MANUAL_BKOPS_MASK); + card->ext_csd.raw_bkops_status = + ext_csd[EXT_CSD_BKOPS_STATUS]; + if (card->ext_csd.man_bkops_en) + pr_debug("%s: MAN_BKOPS_EN bit is set\n", + mmc_hostname(card->host)); + card->ext_csd.auto_bkops_en = + (ext_csd[EXT_CSD_BKOPS_EN] & + EXT_CSD_AUTO_BKOPS_MASK); + if (card->ext_csd.auto_bkops_en) + pr_debug("%s: AUTO_BKOPS_EN bit is set\n", + mmc_hostname(card->host)); + } + + /* check whether the eMMC card supports HPI */ + if (!mmc_card_broken_hpi(card) && + !broken_hpi && (ext_csd[EXT_CSD_HPI_FEATURES] & 0x1)) { + card->ext_csd.hpi = 1; + if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x2) + card->ext_csd.hpi_cmd = MMC_STOP_TRANSMISSION; + else + card->ext_csd.hpi_cmd = MMC_SEND_STATUS; + /* + * Indicate the maximum timeout to close + * a command interrupted by HPI + */ + card->ext_csd.out_of_int_time = + ext_csd[EXT_CSD_OUT_OF_INTERRUPT_TIME] * 10; + } + + card->ext_csd.rel_param = ext_csd[EXT_CSD_WR_REL_PARAM]; + card->ext_csd.rst_n_function = ext_csd[EXT_CSD_RST_N_FUNCTION]; + + /* + * RPMB regions are defined in multiples of 128K. + */ + card->ext_csd.raw_rpmb_size_mult = ext_csd[EXT_CSD_RPMB_MULT]; + if (ext_csd[EXT_CSD_RPMB_MULT] && mmc_host_cmd23(card->host)) { + mmc_part_add(card, ext_csd[EXT_CSD_RPMB_MULT] << 17, + EXT_CSD_PART_CONFIG_ACC_RPMB, + "rpmb", 0, false, + MMC_BLK_DATA_AREA_RPMB); + } + } + + card->ext_csd.raw_erased_mem_count = ext_csd[EXT_CSD_ERASED_MEM_CONT]; + if (ext_csd[EXT_CSD_ERASED_MEM_CONT]) + card->erased_byte = 0xFF; + else + card->erased_byte = 0x0; + + /* eMMC v4.5 or later */ + card->ext_csd.generic_cmd6_time = DEFAULT_CMD6_TIMEOUT_MS; + if (card->ext_csd.rev >= 6) { + card->ext_csd.feature_support |= MMC_DISCARD_FEATURE; + + card->ext_csd.generic_cmd6_time = 10 * + ext_csd[EXT_CSD_GENERIC_CMD6_TIME]; + card->ext_csd.power_off_longtime = 10 * + ext_csd[EXT_CSD_POWER_OFF_LONG_TIME]; + + card->ext_csd.cache_size = + ext_csd[EXT_CSD_CACHE_SIZE + 0] << 0 | + ext_csd[EXT_CSD_CACHE_SIZE + 1] << 8 | + ext_csd[EXT_CSD_CACHE_SIZE + 2] << 16 | + ext_csd[EXT_CSD_CACHE_SIZE + 3] << 24; + + if (ext_csd[EXT_CSD_DATA_SECTOR_SIZE] == 1) + card->ext_csd.data_sector_size = 4096; + else + card->ext_csd.data_sector_size = 512; + + if ((ext_csd[EXT_CSD_DATA_TAG_SUPPORT] & 1) && + (ext_csd[EXT_CSD_TAG_UNIT_SIZE] <= 8)) { + card->ext_csd.data_tag_unit_size = + ((unsigned int) 1 << ext_csd[EXT_CSD_TAG_UNIT_SIZE]) * + (card->ext_csd.data_sector_size); + } else { + card->ext_csd.data_tag_unit_size = 0; + } + + card->ext_csd.max_packed_writes = + ext_csd[EXT_CSD_MAX_PACKED_WRITES]; + card->ext_csd.max_packed_reads = + ext_csd[EXT_CSD_MAX_PACKED_READS]; + } else { + card->ext_csd.data_sector_size = 512; + } + + /* + * GENERIC_CMD6_TIME is to be used "unless a specific timeout is defined + * when accessing a specific field", so use it here if there is no + * PARTITION_SWITCH_TIME. + */ + if (!card->ext_csd.part_time) + card->ext_csd.part_time = card->ext_csd.generic_cmd6_time; + /* Some eMMC set the value too low so set a minimum */ + if (card->ext_csd.part_time < MMC_MIN_PART_SWITCH_TIME) + card->ext_csd.part_time = MMC_MIN_PART_SWITCH_TIME; + + /* eMMC v5 or later */ + if (card->ext_csd.rev >= 7) { + memcpy(card->ext_csd.fwrev, &ext_csd[EXT_CSD_FIRMWARE_VERSION], + MMC_FIRMWARE_LEN); + card->ext_csd.ffu_capable = + (ext_csd[EXT_CSD_SUPPORTED_MODE] & 0x1) && + !(ext_csd[EXT_CSD_FW_CONFIG] & 0x1); + + card->ext_csd.pre_eol_info = ext_csd[EXT_CSD_PRE_EOL_INFO]; + card->ext_csd.device_life_time_est_typ_a = + ext_csd[EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_A]; + card->ext_csd.device_life_time_est_typ_b = + ext_csd[EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_B]; + } + + /* eMMC v5.1 or later */ + if (card->ext_csd.rev >= 8) { + card->ext_csd.cmdq_support = ext_csd[EXT_CSD_CMDQ_SUPPORT] & + EXT_CSD_CMDQ_SUPPORTED; + card->ext_csd.cmdq_depth = (ext_csd[EXT_CSD_CMDQ_DEPTH] & + EXT_CSD_CMDQ_DEPTH_MASK) + 1; + /* Exclude inefficiently small queue depths */ + if (card->ext_csd.cmdq_depth <= 2) { + card->ext_csd.cmdq_support = false; + card->ext_csd.cmdq_depth = 0; + } + if (card->ext_csd.cmdq_support) { + pr_debug("%s: Command Queue supported depth %u\n", + mmc_hostname(card->host), + card->ext_csd.cmdq_depth); + } + card->ext_csd.enhanced_rpmb_supported = + (card->ext_csd.rel_param & + EXT_CSD_WR_REL_PARAM_EN_RPMB_REL_WR); + } +out: + return err; +} + +static int mmc_read_ext_csd(struct mmc_card *card) +{ + u8 *ext_csd; + int err; + + if (!mmc_can_ext_csd(card)) + return 0; + + err = mmc_get_ext_csd(card, &ext_csd); + if (err) { + /* If the host or the card can't do the switch, + * fail more gracefully. */ + if ((err != -EINVAL) + && (err != -ENOSYS) + && (err != -EFAULT)) + return err; + + /* + * High capacity cards should have this "magic" size + * stored in their CSD. + */ + if (card->csd.capacity == (4096 * 512)) { + pr_err("%s: unable to read EXT_CSD on a possible high capacity card. Card will be ignored.\n", + mmc_hostname(card->host)); + } else { + pr_warn("%s: unable to read EXT_CSD, performance might suffer\n", + mmc_hostname(card->host)); + err = 0; + } + + return err; + } + + err = mmc_decode_ext_csd(card, ext_csd); + kfree(ext_csd); + return err; +} + +static int mmc_compare_ext_csds(struct mmc_card *card, unsigned bus_width) +{ + u8 *bw_ext_csd; + int err; + + if (bus_width == MMC_BUS_WIDTH_1) + return 0; + + err = mmc_get_ext_csd(card, &bw_ext_csd); + if (err) + return err; + + /* only compare read only fields */ + err = !((card->ext_csd.raw_partition_support == + bw_ext_csd[EXT_CSD_PARTITION_SUPPORT]) && + (card->ext_csd.raw_erased_mem_count == + bw_ext_csd[EXT_CSD_ERASED_MEM_CONT]) && + (card->ext_csd.rev == + bw_ext_csd[EXT_CSD_REV]) && + (card->ext_csd.raw_ext_csd_structure == + bw_ext_csd[EXT_CSD_STRUCTURE]) && + (card->ext_csd.raw_card_type == + bw_ext_csd[EXT_CSD_CARD_TYPE]) && + (card->ext_csd.raw_s_a_timeout == + bw_ext_csd[EXT_CSD_S_A_TIMEOUT]) && + (card->ext_csd.raw_hc_erase_gap_size == + bw_ext_csd[EXT_CSD_HC_WP_GRP_SIZE]) && + (card->ext_csd.raw_erase_timeout_mult == + bw_ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]) && + (card->ext_csd.raw_hc_erase_grp_size == + bw_ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]) && + (card->ext_csd.raw_sec_trim_mult == + bw_ext_csd[EXT_CSD_SEC_TRIM_MULT]) && + (card->ext_csd.raw_sec_erase_mult == + bw_ext_csd[EXT_CSD_SEC_ERASE_MULT]) && + (card->ext_csd.raw_sec_feature_support == + bw_ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) && + (card->ext_csd.raw_trim_mult == + bw_ext_csd[EXT_CSD_TRIM_MULT]) && + (card->ext_csd.raw_sectors[0] == + bw_ext_csd[EXT_CSD_SEC_CNT + 0]) && + (card->ext_csd.raw_sectors[1] == + bw_ext_csd[EXT_CSD_SEC_CNT + 1]) && + (card->ext_csd.raw_sectors[2] == + bw_ext_csd[EXT_CSD_SEC_CNT + 2]) && + (card->ext_csd.raw_sectors[3] == + bw_ext_csd[EXT_CSD_SEC_CNT + 3]) && + (card->ext_csd.raw_pwr_cl_52_195 == + bw_ext_csd[EXT_CSD_PWR_CL_52_195]) && + (card->ext_csd.raw_pwr_cl_26_195 == + bw_ext_csd[EXT_CSD_PWR_CL_26_195]) && + (card->ext_csd.raw_pwr_cl_52_360 == + bw_ext_csd[EXT_CSD_PWR_CL_52_360]) && + (card->ext_csd.raw_pwr_cl_26_360 == + bw_ext_csd[EXT_CSD_PWR_CL_26_360]) && + (card->ext_csd.raw_pwr_cl_200_195 == + bw_ext_csd[EXT_CSD_PWR_CL_200_195]) && + (card->ext_csd.raw_pwr_cl_200_360 == + bw_ext_csd[EXT_CSD_PWR_CL_200_360]) && + (card->ext_csd.raw_pwr_cl_ddr_52_195 == + bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_195]) && + (card->ext_csd.raw_pwr_cl_ddr_52_360 == + bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_360]) && + (card->ext_csd.raw_pwr_cl_ddr_200_360 == + bw_ext_csd[EXT_CSD_PWR_CL_DDR_200_360])); + + if (err) + err = -EINVAL; + + kfree(bw_ext_csd); + return err; +} + +MMC_DEV_ATTR(cid, "%08x%08x%08x%08x\n", card->raw_cid[0], card->raw_cid[1], + card->raw_cid[2], card->raw_cid[3]); +MMC_DEV_ATTR(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1], + card->raw_csd[2], card->raw_csd[3]); +MMC_DEV_ATTR(date, "%02d/%04d\n", card->cid.month, card->cid.year); +MMC_DEV_ATTR(erase_size, "%u\n", card->erase_size << 9); +MMC_DEV_ATTR(preferred_erase_size, "%u\n", card->pref_erase << 9); +MMC_DEV_ATTR(ffu_capable, "%d\n", card->ext_csd.ffu_capable); +MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev); +MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid); +MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name); +MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid); +MMC_DEV_ATTR(prv, "0x%x\n", card->cid.prv); +MMC_DEV_ATTR(rev, "0x%x\n", card->ext_csd.rev); +MMC_DEV_ATTR(pre_eol_info, "0x%02x\n", card->ext_csd.pre_eol_info); +MMC_DEV_ATTR(life_time, "0x%02x 0x%02x\n", + card->ext_csd.device_life_time_est_typ_a, + card->ext_csd.device_life_time_est_typ_b); +MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial); +MMC_DEV_ATTR(enhanced_area_offset, "%llu\n", + card->ext_csd.enhanced_area_offset); +MMC_DEV_ATTR(enhanced_area_size, "%u\n", card->ext_csd.enhanced_area_size); +MMC_DEV_ATTR(raw_rpmb_size_mult, "%#x\n", card->ext_csd.raw_rpmb_size_mult); +MMC_DEV_ATTR(enhanced_rpmb_supported, "%#x\n", + card->ext_csd.enhanced_rpmb_supported); +MMC_DEV_ATTR(rel_sectors, "%#x\n", card->ext_csd.rel_sectors); +MMC_DEV_ATTR(ocr, "0x%08x\n", card->ocr); +MMC_DEV_ATTR(rca, "0x%04x\n", card->rca); +MMC_DEV_ATTR(cmdq_en, "%d\n", card->ext_csd.cmdq_en); + +static ssize_t mmc_fwrev_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct mmc_card *card = mmc_dev_to_card(dev); + + if (card->ext_csd.rev < 7) { + return sprintf(buf, "0x%x\n", card->cid.fwrev); + } else { + return sprintf(buf, "0x%*phN\n", MMC_FIRMWARE_LEN, + card->ext_csd.fwrev); + } +} + +static DEVICE_ATTR(fwrev, S_IRUGO, mmc_fwrev_show, NULL); + +static ssize_t mmc_dsr_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct mmc_card *card = mmc_dev_to_card(dev); + struct mmc_host *host = card->host; + + if (card->csd.dsr_imp && host->dsr_req) + return sprintf(buf, "0x%x\n", host->dsr); + else + /* return default DSR value */ + return sprintf(buf, "0x%x\n", 0x404); +} + +static DEVICE_ATTR(dsr, S_IRUGO, mmc_dsr_show, NULL); + +static struct attribute *mmc_std_attrs[] = { + &dev_attr_cid.attr, + &dev_attr_csd.attr, + &dev_attr_date.attr, + &dev_attr_erase_size.attr, + &dev_attr_preferred_erase_size.attr, + &dev_attr_fwrev.attr, + &dev_attr_ffu_capable.attr, + &dev_attr_hwrev.attr, + &dev_attr_manfid.attr, + &dev_attr_name.attr, + &dev_attr_oemid.attr, + &dev_attr_prv.attr, + &dev_attr_rev.attr, + &dev_attr_pre_eol_info.attr, + &dev_attr_life_time.attr, + &dev_attr_serial.attr, + &dev_attr_enhanced_area_offset.attr, + &dev_attr_enhanced_area_size.attr, + &dev_attr_raw_rpmb_size_mult.attr, + &dev_attr_enhanced_rpmb_supported.attr, + &dev_attr_rel_sectors.attr, + &dev_attr_ocr.attr, + &dev_attr_rca.attr, + &dev_attr_dsr.attr, + &dev_attr_cmdq_en.attr, + NULL, +}; +ATTRIBUTE_GROUPS(mmc_std); + +static struct device_type mmc_type = { + .groups = mmc_std_groups, +}; + +/* + * Select the PowerClass for the current bus width + * If power class is defined for 4/8 bit bus in the + * extended CSD register, select it by executing the + * mmc_switch command. + */ +static int __mmc_select_powerclass(struct mmc_card *card, + unsigned int bus_width) +{ + struct mmc_host *host = card->host; + struct mmc_ext_csd *ext_csd = &card->ext_csd; + unsigned int pwrclass_val = 0; + int err = 0; + + switch (1 << host->ios.vdd) { + case MMC_VDD_165_195: + if (host->ios.clock <= MMC_HIGH_26_MAX_DTR) + pwrclass_val = ext_csd->raw_pwr_cl_26_195; + else if (host->ios.clock <= MMC_HIGH_52_MAX_DTR) + pwrclass_val = (bus_width <= EXT_CSD_BUS_WIDTH_8) ? + ext_csd->raw_pwr_cl_52_195 : + ext_csd->raw_pwr_cl_ddr_52_195; + else if (host->ios.clock <= MMC_HS200_MAX_DTR) + pwrclass_val = ext_csd->raw_pwr_cl_200_195; + break; + case MMC_VDD_27_28: + case MMC_VDD_28_29: + case MMC_VDD_29_30: + case MMC_VDD_30_31: + case MMC_VDD_31_32: + case MMC_VDD_32_33: + case MMC_VDD_33_34: + case MMC_VDD_34_35: + case MMC_VDD_35_36: + if (host->ios.clock <= MMC_HIGH_26_MAX_DTR) + pwrclass_val = ext_csd->raw_pwr_cl_26_360; + else if (host->ios.clock <= MMC_HIGH_52_MAX_DTR) + pwrclass_val = (bus_width <= EXT_CSD_BUS_WIDTH_8) ? + ext_csd->raw_pwr_cl_52_360 : + ext_csd->raw_pwr_cl_ddr_52_360; + else if (host->ios.clock <= MMC_HS200_MAX_DTR) + pwrclass_val = (bus_width == EXT_CSD_DDR_BUS_WIDTH_8) ? + ext_csd->raw_pwr_cl_ddr_200_360 : + ext_csd->raw_pwr_cl_200_360; + break; + default: + pr_warn("%s: Voltage range not supported for power class\n", + mmc_hostname(host)); + return -EINVAL; + } + + if (bus_width & (EXT_CSD_BUS_WIDTH_8 | EXT_CSD_DDR_BUS_WIDTH_8)) + pwrclass_val = (pwrclass_val & EXT_CSD_PWR_CL_8BIT_MASK) >> + EXT_CSD_PWR_CL_8BIT_SHIFT; + else + pwrclass_val = (pwrclass_val & EXT_CSD_PWR_CL_4BIT_MASK) >> + EXT_CSD_PWR_CL_4BIT_SHIFT; + + /* If the power class is different from the default value */ + if (pwrclass_val > 0) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_POWER_CLASS, + pwrclass_val, + card->ext_csd.generic_cmd6_time); + } + + return err; +} + +static int mmc_select_powerclass(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + u32 bus_width, ext_csd_bits; + int err, ddr; + + /* Power class selection is supported for versions >= 4.0 */ + if (!mmc_can_ext_csd(card)) + return 0; + + bus_width = host->ios.bus_width; + /* Power class values are defined only for 4/8 bit bus */ + if (bus_width == MMC_BUS_WIDTH_1) + return 0; + + ddr = card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_52; + if (ddr) + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? + EXT_CSD_DDR_BUS_WIDTH_8 : EXT_CSD_DDR_BUS_WIDTH_4; + else + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? + EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4; + + err = __mmc_select_powerclass(card, ext_csd_bits); + if (err) + pr_warn("%s: power class selection to bus width %d ddr %d failed\n", + mmc_hostname(host), 1 << bus_width, ddr); + + return err; +} + +/* + * Set the bus speed for the selected speed mode. + */ +static void mmc_set_bus_speed(struct mmc_card *card) +{ + unsigned int max_dtr = (unsigned int)-1; + + if ((mmc_card_hs200(card) || mmc_card_hs400(card)) && + max_dtr > card->ext_csd.hs200_max_dtr) + max_dtr = card->ext_csd.hs200_max_dtr; + else if (mmc_card_hs(card) && max_dtr > card->ext_csd.hs_max_dtr) + max_dtr = card->ext_csd.hs_max_dtr; + else if (max_dtr > card->csd.max_dtr) + max_dtr = card->csd.max_dtr; + + mmc_set_clock(card->host, max_dtr); +} + +/* + * Select the bus width amoung 4-bit and 8-bit(SDR). + * If the bus width is changed successfully, return the selected width value. + * Zero is returned instead of error value if the wide width is not supported. + */ +static int mmc_select_bus_width(struct mmc_card *card) +{ + static unsigned ext_csd_bits[] = { + EXT_CSD_BUS_WIDTH_8, + EXT_CSD_BUS_WIDTH_4, + }; + static unsigned bus_widths[] = { + MMC_BUS_WIDTH_8, + MMC_BUS_WIDTH_4, + }; + struct mmc_host *host = card->host; + unsigned idx, bus_width = 0; + int err = 0; + + if (!mmc_can_ext_csd(card) || + !(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) + return 0; + + idx = (host->caps & MMC_CAP_8_BIT_DATA) ? 0 : 1; + + /* + * Unlike SD, MMC cards dont have a configuration register to notify + * supported bus width. So bus test command should be run to identify + * the supported bus width or compare the ext csd values of current + * bus width and ext csd values of 1 bit mode read earlier. + */ + for (; idx < ARRAY_SIZE(bus_widths); idx++) { + /* + * Host is capable of 8bit transfer, then switch + * the device to work in 8bit transfer mode. If the + * mmc switch command returns error then switch to + * 4bit transfer mode. On success set the corresponding + * bus width on the host. + */ + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + ext_csd_bits[idx], + card->ext_csd.generic_cmd6_time); + if (err) + continue; + + bus_width = bus_widths[idx]; + mmc_set_bus_width(host, bus_width); + + /* + * If controller can't handle bus width test, + * compare ext_csd previously read in 1 bit mode + * against ext_csd at new bus width + */ + if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST)) + err = mmc_compare_ext_csds(card, bus_width); + else + err = mmc_bus_test(card, bus_width); + + if (!err) { + err = bus_width; + break; + } else { + pr_warn("%s: switch to bus width %d failed\n", + mmc_hostname(host), 1 << bus_width); + } + } + + return err; +} + +/* + * Switch to the high-speed mode + */ +static int mmc_select_hs(struct mmc_card *card) +{ + int err; + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS, + card->ext_csd.generic_cmd6_time, MMC_TIMING_MMC_HS, + true, true); + if (err) + pr_warn("%s: switch to high-speed failed, err:%d\n", + mmc_hostname(card->host), err); + + return err; +} + +/* + * Activate wide bus and DDR if supported. + */ +static int mmc_select_hs_ddr(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + u32 bus_width, ext_csd_bits; + int err = 0; + + if (!(card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_52)) + return 0; + + bus_width = host->ios.bus_width; + if (bus_width == MMC_BUS_WIDTH_1) + return 0; + + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? + EXT_CSD_DDR_BUS_WIDTH_8 : EXT_CSD_DDR_BUS_WIDTH_4; + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + ext_csd_bits, + card->ext_csd.generic_cmd6_time, + MMC_TIMING_MMC_DDR52, + true, true); + if (err) { + pr_err("%s: switch to bus width %d ddr failed\n", + mmc_hostname(host), 1 << bus_width); + return err; + } + + /* + * eMMC cards can support 3.3V to 1.2V i/o (vccq) + * signaling. + * + * EXT_CSD_CARD_TYPE_DDR_1_8V means 3.3V or 1.8V vccq. + * + * 1.8V vccq at 3.3V core voltage (vcc) is not required + * in the JEDEC spec for DDR. + * + * Even (e)MMC card can support 3.3v to 1.2v vccq, but not all + * host controller can support this, like some of the SDHCI + * controller which connect to an eMMC device. Some of these + * host controller still needs to use 1.8v vccq for supporting + * DDR mode. + * + * So the sequence will be: + * if (host and device can both support 1.2v IO) + * use 1.2v IO; + * else if (host and device can both support 1.8v IO) + * use 1.8v IO; + * so if host and device can only support 3.3v IO, this is the + * last choice. + * + * WARNING: eMMC rules are NOT the same as SD DDR + */ + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_2V) { + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120); + if (!err) + return 0; + } + + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_8V && + host->caps & MMC_CAP_1_8V_DDR) + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); + + /* make sure vccq is 3.3v after switching disaster */ + if (err) + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330); + + return err; +} + +static int mmc_select_hs400(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + unsigned int max_dtr; + int err = 0; + u8 val; + + /* + * HS400 mode requires 8-bit bus width + */ + if (!(card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400 && + host->ios.bus_width == MMC_BUS_WIDTH_8)) + return 0; + + /* Switch card to HS mode */ + val = EXT_CSD_TIMING_HS; + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, val, + card->ext_csd.generic_cmd6_time, 0, + false, true); + if (err) { + pr_err("%s: switch to high-speed from hs200 failed, err:%d\n", + mmc_hostname(host), err); + return err; + } + + /* Prepare host to downgrade to HS timing */ + if (host->ops->hs400_downgrade) + host->ops->hs400_downgrade(host); + + /* Set host controller to HS timing */ + mmc_set_timing(host, MMC_TIMING_MMC_HS); + + /* Reduce frequency to HS frequency */ + max_dtr = card->ext_csd.hs_max_dtr; + mmc_set_clock(host, max_dtr); + + err = mmc_switch_status(card, true); + if (err) + goto out_err; + + if (host->ops->hs400_prepare_ddr) + host->ops->hs400_prepare_ddr(host); + + /* Switch card to DDR */ + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + EXT_CSD_DDR_BUS_WIDTH_8, + card->ext_csd.generic_cmd6_time); + if (err) { + pr_err("%s: switch to bus width for hs400 failed, err:%d\n", + mmc_hostname(host), err); + return err; + } + + /* Switch card to HS400 */ + val = EXT_CSD_TIMING_HS400 | + card->drive_strength << EXT_CSD_DRV_STR_SHIFT; + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, val, + card->ext_csd.generic_cmd6_time, 0, + false, true); + if (err) { + pr_err("%s: switch to hs400 failed, err:%d\n", + mmc_hostname(host), err); + return err; + } + + /* Set host controller to HS400 timing and frequency */ + mmc_set_timing(host, MMC_TIMING_MMC_HS400); + mmc_set_bus_speed(card); + + if (host->ops->hs400_complete) + host->ops->hs400_complete(host); + + err = mmc_switch_status(card, true); + if (err) + goto out_err; + + return 0; + +out_err: + pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host), + __func__, err); + return err; +} + +int mmc_hs200_to_hs400(struct mmc_card *card) +{ + return mmc_select_hs400(card); +} + +int mmc_hs400_to_hs200(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + unsigned int max_dtr; + int err; + u8 val; + + /* Reduce frequency to HS */ + max_dtr = card->ext_csd.hs_max_dtr; + mmc_set_clock(host, max_dtr); + + /* Switch HS400 to HS DDR */ + val = EXT_CSD_TIMING_HS; + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, + val, card->ext_csd.generic_cmd6_time, 0, + false, true); + if (err) + goto out_err; + + if (host->ops->hs400_downgrade) + host->ops->hs400_downgrade(host); + + mmc_set_timing(host, MMC_TIMING_MMC_DDR52); + + err = mmc_switch_status(card, true); + if (err) + goto out_err; + + /* Switch HS DDR to HS */ + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, + EXT_CSD_BUS_WIDTH_8, card->ext_csd.generic_cmd6_time, + 0, false, true); + if (err) + goto out_err; + + mmc_set_timing(host, MMC_TIMING_MMC_HS); + + err = mmc_switch_status(card, true); + if (err) + goto out_err; + + /* Switch HS to HS200 */ + val = EXT_CSD_TIMING_HS200 | + card->drive_strength << EXT_CSD_DRV_STR_SHIFT; + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, + val, card->ext_csd.generic_cmd6_time, 0, + false, true); + if (err) + goto out_err; + + mmc_set_timing(host, MMC_TIMING_MMC_HS200); + + /* + * For HS200, CRC errors are not a reliable way to know the switch + * failed. If there really is a problem, we would expect tuning will + * fail and the result ends up the same. + */ + err = mmc_switch_status(card, false); + if (err) + goto out_err; + + mmc_set_bus_speed(card); + + /* Prepare tuning for HS400 mode. */ + if (host->ops->prepare_hs400_tuning) + host->ops->prepare_hs400_tuning(host, &host->ios); + + return 0; + +out_err: + pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host), + __func__, err); + return err; +} + +static void mmc_select_driver_type(struct mmc_card *card) +{ + int card_drv_type, drive_strength, drv_type = 0; + int fixed_drv_type = card->host->fixed_drv_type; + + card_drv_type = card->ext_csd.raw_driver_strength | + mmc_driver_type_mask(0); + + if (fixed_drv_type >= 0) + drive_strength = card_drv_type & mmc_driver_type_mask(fixed_drv_type) + ? fixed_drv_type : 0; + else + drive_strength = mmc_select_drive_strength(card, + card->ext_csd.hs200_max_dtr, + card_drv_type, &drv_type); + + card->drive_strength = drive_strength; + + if (drv_type) + mmc_set_driver_type(card->host, drv_type); +} + +static int mmc_select_hs400es(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + int err = -EINVAL; + u8 val; + + if (!(host->caps & MMC_CAP_8_BIT_DATA)) { + err = -ENOTSUPP; + goto out_err; + } + + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400_1_2V) + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120); + + if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400_1_8V) + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); + + /* If fails try again during next card power cycle */ + if (err) + goto out_err; + + err = mmc_select_bus_width(card); + if (err != MMC_BUS_WIDTH_8) { + pr_err("%s: switch to 8bit bus width failed, err:%d\n", + mmc_hostname(host), err); + err = err < 0 ? err : -ENOTSUPP; + goto out_err; + } + + /* Switch card to HS mode */ + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS, + card->ext_csd.generic_cmd6_time, 0, + false, true); + if (err) { + pr_err("%s: switch to hs for hs400es failed, err:%d\n", + mmc_hostname(host), err); + goto out_err; + } + + /* + * Bump to HS timing and frequency. Some cards don't handle + * SEND_STATUS reliably at the initial frequency. + */ + mmc_set_timing(host, MMC_TIMING_MMC_HS); + mmc_set_bus_speed(card); + + err = mmc_switch_status(card, true); + if (err) + goto out_err; + + /* Switch card to DDR with strobe bit */ + val = EXT_CSD_DDR_BUS_WIDTH_8 | EXT_CSD_BUS_WIDTH_STROBE; + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + val, + card->ext_csd.generic_cmd6_time); + if (err) { + pr_err("%s: switch to bus width for hs400es failed, err:%d\n", + mmc_hostname(host), err); + goto out_err; + } + + mmc_select_driver_type(card); + + /* Switch card to HS400 */ + val = EXT_CSD_TIMING_HS400 | + card->drive_strength << EXT_CSD_DRV_STR_SHIFT; + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, val, + card->ext_csd.generic_cmd6_time, 0, + false, true); + if (err) { + pr_err("%s: switch to hs400es failed, err:%d\n", + mmc_hostname(host), err); + goto out_err; + } + + /* Set host controller to HS400 timing and frequency */ + mmc_set_timing(host, MMC_TIMING_MMC_HS400); + + /* Controller enable enhanced strobe function */ + host->ios.enhanced_strobe = true; + if (host->ops->hs400_enhanced_strobe) + host->ops->hs400_enhanced_strobe(host, &host->ios); + + err = mmc_switch_status(card, true); + if (err) + goto out_err; + + return 0; + +out_err: + pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host), + __func__, err); + return err; +} + +/* + * For device supporting HS200 mode, the following sequence + * should be done before executing the tuning process. + * 1. set the desired bus width(4-bit or 8-bit, 1-bit is not supported) + * 2. switch to HS200 mode + * 3. set the clock to > 52Mhz and <=200MHz + */ +static int mmc_select_hs200(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + unsigned int old_timing, old_signal_voltage, old_clock; + int err = -EINVAL; + u8 val; + + old_signal_voltage = host->ios.signal_voltage; + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_2V) + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120); + + if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_8V) + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); + + /* If fails try again during next card power cycle */ + if (err) + return err; + + mmc_select_driver_type(card); + + /* + * Set the bus width(4 or 8) with host's support and + * switch to HS200 mode if bus width is set successfully. + */ + err = mmc_select_bus_width(card); + if (err > 0) { + val = EXT_CSD_TIMING_HS200 | + card->drive_strength << EXT_CSD_DRV_STR_SHIFT; + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, val, + card->ext_csd.generic_cmd6_time, 0, + false, true); + if (err) + goto err; + + /* + * Bump to HS timing and frequency. Some cards don't handle + * SEND_STATUS reliably at the initial frequency. + * NB: We can't move to full (HS200) speeds until after we've + * successfully switched over. + */ + old_timing = host->ios.timing; + old_clock = host->ios.clock; + mmc_set_timing(host, MMC_TIMING_MMC_HS200); + mmc_set_clock(card->host, card->ext_csd.hs_max_dtr); + + /* + * For HS200, CRC errors are not a reliable way to know the + * switch failed. If there really is a problem, we would expect + * tuning will fail and the result ends up the same. + */ + err = mmc_switch_status(card, false); + + /* + * mmc_select_timing() assumes timing has not changed if + * it is a switch error. + */ + if (err == -EBADMSG) { + mmc_set_clock(host, old_clock); + mmc_set_timing(host, old_timing); + } + } +err: + if (err) { + /* fall back to the old signal voltage, if fails report error */ + if (mmc_set_signal_voltage(host, old_signal_voltage)) + err = -EIO; + + pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host), + __func__, err); + } + return err; +} + +/* + * Activate High Speed, HS200 or HS400ES mode if supported. + */ +static int mmc_select_timing(struct mmc_card *card) +{ + int err = 0; + + if (!mmc_can_ext_csd(card)) + goto bus_speed; + + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400ES) + err = mmc_select_hs400es(card); + else if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200) + err = mmc_select_hs200(card); + else if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS) + err = mmc_select_hs(card); + + if (err && err != -EBADMSG) + return err; + +bus_speed: + /* + * Set the bus speed to the selected bus timing. + * If timing is not selected, backward compatible is the default. + */ + mmc_set_bus_speed(card); + return 0; +} + +/* + * Execute tuning sequence to seek the proper bus operating + * conditions for HS200 and HS400, which sends CMD21 to the device. + */ +static int mmc_hs200_tuning(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + + /* + * Timing should be adjusted to the HS400 target + * operation frequency for tuning process + */ + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400 && + host->ios.bus_width == MMC_BUS_WIDTH_8) + if (host->ops->prepare_hs400_tuning) + host->ops->prepare_hs400_tuning(host, &host->ios); + + return mmc_execute_tuning(card); +} + +/* + * Handle the detection and initialisation of a card. + * + * In the case of a resume, "oldcard" will contain the card + * we're trying to reinitialise. + */ +static int mmc_init_card(struct mmc_host *host, u32 ocr, + struct mmc_card *oldcard) +{ + struct mmc_card *card; + int err; + u32 cid[4]; + u32 rocr; + + WARN_ON(!host->claimed); + + /* Set correct bus mode for MMC before attempting init */ + if (!mmc_host_is_spi(host)) + mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN); + + /* + * Since we're changing the OCR value, we seem to + * need to tell some cards to go back to the idle + * state. We wait 1ms to give cards time to + * respond. + * mmc_go_idle is needed for eMMC that are asleep + */ + mmc_go_idle(host); + + /* The extra bit indicates that we support high capacity */ + err = mmc_send_op_cond(host, ocr | (1 << 30), &rocr); + if (err) + goto err; + + /* + * For SPI, enable CRC as appropriate. + */ + if (mmc_host_is_spi(host)) { + err = mmc_spi_set_crc(host, use_spi_crc); + if (err) + goto err; + } + + /* + * Fetch CID from card. + */ + err = mmc_send_cid(host, cid); + if (err) + goto err; + + if (oldcard) { + if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0) { + pr_debug("%s: Perhaps the card was replaced\n", + mmc_hostname(host)); + err = -ENOENT; + goto err; + } + + card = oldcard; + } else { + /* + * Allocate card structure. + */ + card = mmc_alloc_card(host, &mmc_type); + if (IS_ERR(card)) { + err = PTR_ERR(card); + goto err; + } + + card->ocr = ocr; + card->type = MMC_TYPE_MMC; + card->rca = 1; + memcpy(card->raw_cid, cid, sizeof(card->raw_cid)); + } + + /* + * Call the optional HC's init_card function to handle quirks. + */ + if (host->ops->init_card) + host->ops->init_card(host, card); + + /* + * For native busses: set card RCA and quit open drain mode. + */ + if (!mmc_host_is_spi(host)) { + err = mmc_set_relative_addr(card); + if (err) + goto free_card; + + mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL); + } + + if (!oldcard) { + /* + * Fetch CSD from card. + */ + err = mmc_send_csd(card, card->raw_csd); + if (err) + goto free_card; + + err = mmc_decode_csd(card); + if (err) + goto free_card; + err = mmc_decode_cid(card); + if (err) + goto free_card; + } + + /* + * handling only for cards supporting DSR and hosts requesting + * DSR configuration + */ + if (card->csd.dsr_imp && host->dsr_req) + mmc_set_dsr(host); + + /* + * Select card, as all following commands rely on that. + */ + if (!mmc_host_is_spi(host)) { + err = mmc_select_card(card); + if (err) + goto free_card; + } + + if (!oldcard) { + /* Read extended CSD. */ + err = mmc_read_ext_csd(card); + if (err) + goto free_card; + + /* + * If doing byte addressing, check if required to do sector + * addressing. Handle the case of <2GB cards needing sector + * addressing. See section 8.1 JEDEC Standard JED84-A441; + * ocr register has bit 30 set for sector addressing. + */ + if (rocr & BIT(30)) + mmc_card_set_blockaddr(card); + + /* Erase size depends on CSD and Extended CSD */ + mmc_set_erase_size(card); + } + + /* Enable ERASE_GRP_DEF. This bit is lost after a reset or power off. */ + if (card->ext_csd.rev >= 3) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_ERASE_GROUP_DEF, 1, + card->ext_csd.generic_cmd6_time); + + if (err && err != -EBADMSG) + goto free_card; + + if (err) { + err = 0; + /* + * Just disable enhanced area off & sz + * will try to enable ERASE_GROUP_DEF + * during next time reinit + */ + card->ext_csd.enhanced_area_offset = -EINVAL; + card->ext_csd.enhanced_area_size = -EINVAL; + } else { + card->ext_csd.erase_group_def = 1; + /* + * enable ERASE_GRP_DEF successfully. + * This will affect the erase size, so + * here need to reset erase size + */ + mmc_set_erase_size(card); + } + } + + /* + * Ensure eMMC user default partition is enabled + */ + if (card->ext_csd.part_config & EXT_CSD_PART_CONFIG_ACC_MASK) { + card->ext_csd.part_config &= ~EXT_CSD_PART_CONFIG_ACC_MASK; + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONFIG, + card->ext_csd.part_config, + card->ext_csd.part_time); + if (err && err != -EBADMSG) + goto free_card; + } + + /* + * Enable power_off_notification byte in the ext_csd register + */ + if (card->ext_csd.rev >= 6) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_POWER_OFF_NOTIFICATION, + EXT_CSD_POWER_ON, + card->ext_csd.generic_cmd6_time); + if (err && err != -EBADMSG) + goto free_card; + + /* + * The err can be -EBADMSG or 0, + * so check for success and update the flag + */ + if (!err) + card->ext_csd.power_off_notification = EXT_CSD_POWER_ON; + } + + /* set erase_arg */ + if (mmc_can_discard(card)) + card->erase_arg = MMC_DISCARD_ARG; + else if (mmc_can_trim(card)) + card->erase_arg = MMC_TRIM_ARG; + else + card->erase_arg = MMC_ERASE_ARG; + + /* + * Select timing interface + */ + err = mmc_select_timing(card); + if (err) + goto free_card; + + if (mmc_card_hs200(card)) { + host->doing_init_tune = 1; + + err = mmc_hs200_tuning(card); + if (!err) + err = mmc_select_hs400(card); + + host->doing_init_tune = 0; + + if (err) + goto free_card; + + } else if (!mmc_card_hs400es(card)) { + /* Select the desired bus width optionally */ + err = mmc_select_bus_width(card); + if (err > 0 && mmc_card_hs(card)) { + err = mmc_select_hs_ddr(card); + if (err) + goto free_card; + } + } + + /* + * Choose the power class with selected bus interface + */ + mmc_select_powerclass(card); + + /* + * Enable HPI feature (if supported) + */ + if (card->ext_csd.hpi) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HPI_MGMT, 1, + card->ext_csd.generic_cmd6_time); + if (err && err != -EBADMSG) + goto free_card; + if (err) { + pr_warn("%s: Enabling HPI failed\n", + mmc_hostname(card->host)); + card->ext_csd.hpi_en = 0; + err = 0; + } else { + card->ext_csd.hpi_en = 1; + } + } + + /* + * If cache size is higher than 0, this indicates the existence of cache + * and it can be turned on. Note that some eMMCs from Micron has been + * reported to need ~800 ms timeout, while enabling the cache after + * sudden power failure tests. Let's extend the timeout to a minimum of + * DEFAULT_CACHE_EN_TIMEOUT_MS and do it for all cards. + */ + if (card->ext_csd.cache_size > 0) { + unsigned int timeout_ms = MIN_CACHE_EN_TIMEOUT_MS; + + timeout_ms = max(card->ext_csd.generic_cmd6_time, timeout_ms); + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_CACHE_CTRL, 1, timeout_ms); + if (err && err != -EBADMSG) + goto free_card; + + /* + * Only if no error, cache is turned on successfully. + */ + if (err) { + pr_warn("%s: Cache is supported, but failed to turn on (%d)\n", + mmc_hostname(card->host), err); + card->ext_csd.cache_ctrl = 0; + err = 0; + } else { + card->ext_csd.cache_ctrl = 1; + } + } + + /* + * Enable Command Queue if supported. Note that Packed Commands cannot + * be used with Command Queue. + */ + card->ext_csd.cmdq_en = false; + if (card->ext_csd.cmdq_support && host->caps2 & MMC_CAP2_CQE) { + err = mmc_cmdq_enable(card); + if (err && err != -EBADMSG) + goto free_card; + if (err) { + pr_warn("%s: Enabling CMDQ failed\n", + mmc_hostname(card->host)); + card->ext_csd.cmdq_support = false; + card->ext_csd.cmdq_depth = 0; + err = 0; + } + } + /* + * In some cases (e.g. RPMB or mmc_test), the Command Queue must be + * disabled for a time, so a flag is needed to indicate to re-enable the + * Command Queue. + */ + card->reenable_cmdq = card->ext_csd.cmdq_en; + + if (host->cqe_ops && !host->cqe_enabled) { + err = host->cqe_ops->cqe_enable(host, card); + if (!err) { + host->cqe_enabled = true; + + if (card->ext_csd.cmdq_en) { + pr_info("%s: Command Queue Engine enabled\n", + mmc_hostname(host)); + } else { + host->hsq_enabled = true; + pr_info("%s: Host Software Queue enabled\n", + mmc_hostname(host)); + } + } + } + + if (host->caps2 & MMC_CAP2_AVOID_3_3V && + host->ios.signal_voltage == MMC_SIGNAL_VOLTAGE_330) { + pr_err("%s: Host failed to negotiate down from 3.3V\n", + mmc_hostname(host)); + err = -EINVAL; + goto free_card; + } + + if (!oldcard) + host->card = card; + + return 0; + +free_card: + if (!oldcard) + mmc_remove_card(card); +err: + return err; +} + +static int mmc_can_sleep(struct mmc_card *card) +{ + return (card && card->ext_csd.rev >= 3); +} + +static int mmc_sleep(struct mmc_host *host) +{ + struct mmc_command cmd = {}; + struct mmc_card *card = host->card; + unsigned int timeout_ms = DIV_ROUND_UP(card->ext_csd.sa_timeout, 10000); + int err; + + /* Re-tuning can't be done once the card is deselected */ + mmc_retune_hold(host); + + err = mmc_deselect_cards(host); + if (err) + goto out_release; + + cmd.opcode = MMC_SLEEP_AWAKE; + cmd.arg = card->rca << 16; + cmd.arg |= 1 << 15; + + /* + * If the max_busy_timeout of the host is specified, validate it against + * the sleep cmd timeout. A failure means we need to prevent the host + * from doing hw busy detection, which is done by converting to a R1 + * response instead of a R1B. Note, some hosts requires R1B, which also + * means they are on their own when it comes to deal with the busy + * timeout. + */ + if (!(host->caps & MMC_CAP_NEED_RSP_BUSY) && host->max_busy_timeout && + (timeout_ms > host->max_busy_timeout)) { + cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; + } else { + cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; + cmd.busy_timeout = timeout_ms; + } + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) + goto out_release; + + /* + * If the host does not wait while the card signals busy, then we will + * will have to wait the sleep/awake timeout. Note, we cannot use the + * SEND_STATUS command to poll the status because that command (and most + * others) is invalid while the card sleeps. + */ + if (!cmd.busy_timeout || !(host->caps & MMC_CAP_WAIT_WHILE_BUSY)) + mmc_delay(timeout_ms); + +out_release: + mmc_retune_release(host); + return err; +} + +static int mmc_can_poweroff_notify(const struct mmc_card *card) +{ + return card && + mmc_card_mmc(card) && + (card->ext_csd.power_off_notification == EXT_CSD_POWER_ON); +} + +static int mmc_poweroff_notify(struct mmc_card *card, unsigned int notify_type) +{ + unsigned int timeout = card->ext_csd.generic_cmd6_time; + int err; + + /* Use EXT_CSD_POWER_OFF_SHORT as default notification type. */ + if (notify_type == EXT_CSD_POWER_OFF_LONG) + timeout = card->ext_csd.power_off_longtime; + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_POWER_OFF_NOTIFICATION, + notify_type, timeout, 0, false, false); + if (err) + pr_err("%s: Power Off Notification timed out, %u\n", + mmc_hostname(card->host), timeout); + + /* Disable the power off notification after the switch operation. */ + card->ext_csd.power_off_notification = EXT_CSD_NO_POWER_NOTIFICATION; + + return err; +} + +/* + * Host is being removed. Free up the current card. + */ +static void mmc_remove(struct mmc_host *host) +{ + mmc_remove_card(host->card); + host->card = NULL; +} + +/* + * Card detection - card is alive. + */ +static int mmc_alive(struct mmc_host *host) +{ + return mmc_send_status(host->card, NULL); +} + +/* + * Card detection callback from host. + */ +static void mmc_detect(struct mmc_host *host) +{ + int err; + + mmc_get_card(host->card, NULL); + + /* + * Just check if our card has been removed. + */ + err = _mmc_detect_card_removed(host); + + mmc_put_card(host->card, NULL); + + if (err) { + mmc_remove(host); + + mmc_claim_host(host); + mmc_detach_bus(host); + mmc_power_off(host); + mmc_release_host(host); + } +} + +static bool _mmc_cache_enabled(struct mmc_host *host) +{ + return host->card->ext_csd.cache_size > 0 && + host->card->ext_csd.cache_ctrl & 1; +} + +static int _mmc_suspend(struct mmc_host *host, bool is_suspend) +{ + int err = 0; + unsigned int notify_type = is_suspend ? EXT_CSD_POWER_OFF_SHORT : + EXT_CSD_POWER_OFF_LONG; + + mmc_claim_host(host); + + if (mmc_card_suspended(host->card)) + goto out; + + err = mmc_flush_cache(host->card); + if (err) + goto out; + + if (mmc_can_poweroff_notify(host->card) && + ((host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) || !is_suspend || + (host->caps2 & MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND))) + err = mmc_poweroff_notify(host->card, notify_type); + else if (mmc_can_sleep(host->card)) + err = mmc_sleep(host); + else if (!mmc_host_is_spi(host)) + err = mmc_deselect_cards(host); + + if (!err) { + mmc_power_off(host); + mmc_card_set_suspended(host->card); + } +out: + mmc_release_host(host); + return err; +} + +/* + * Suspend callback + */ +static int mmc_suspend(struct mmc_host *host) +{ + int err; + + err = _mmc_suspend(host, true); + if (!err) { + pm_runtime_disable(&host->card->dev); + pm_runtime_set_suspended(&host->card->dev); + } + + return err; +} + +/* + * This function tries to determine if the same card is still present + * and, if so, restore all state to it. + */ +static int _mmc_resume(struct mmc_host *host) +{ + int err = 0; + + mmc_claim_host(host); + + if (!mmc_card_suspended(host->card)) + goto out; + + mmc_power_up(host, host->card->ocr); + err = mmc_init_card(host, host->card->ocr, host->card); + mmc_card_clr_suspended(host->card); + +out: + mmc_release_host(host); + return err; +} + +/* + * Shutdown callback + */ +static int mmc_shutdown(struct mmc_host *host) +{ + int err = 0; + + /* + * In a specific case for poweroff notify, we need to resume the card + * before we can shutdown it properly. + */ + if (mmc_can_poweroff_notify(host->card) && + !(host->caps2 & MMC_CAP2_FULL_PWR_CYCLE)) + err = _mmc_resume(host); + + if (!err) + err = _mmc_suspend(host, false); + + return err; +} + +/* + * Callback for resume. + */ +static int mmc_resume(struct mmc_host *host) +{ + pm_runtime_enable(&host->card->dev); + return 0; +} + +/* + * Callback for runtime_suspend. + */ +static int mmc_runtime_suspend(struct mmc_host *host) +{ + int err; + + if (!(host->caps & MMC_CAP_AGGRESSIVE_PM)) + return 0; + + err = _mmc_suspend(host, true); + if (err) + pr_err("%s: error %d doing aggressive suspend\n", + mmc_hostname(host), err); + + return err; +} + +/* + * Callback for runtime_resume. + */ +static int mmc_runtime_resume(struct mmc_host *host) +{ + int err; + + err = _mmc_resume(host); + if (err && err != -ENOMEDIUM) + pr_err("%s: error %d doing runtime resume\n", + mmc_hostname(host), err); + + return 0; +} + +static int mmc_can_reset(struct mmc_card *card) +{ + u8 rst_n_function; + + rst_n_function = card->ext_csd.rst_n_function; + if ((rst_n_function & EXT_CSD_RST_N_EN_MASK) != EXT_CSD_RST_N_ENABLED) + return 0; + return 1; +} + +static int _mmc_hw_reset(struct mmc_host *host) +{ + struct mmc_card *card = host->card; + + /* + * In the case of recovery, we can't expect flushing the cache to work + * always, but we have a go and ignore errors. + */ + mmc_flush_cache(host->card); + + if ((host->caps & MMC_CAP_HW_RESET) && host->ops->hw_reset && + mmc_can_reset(card)) { + /* If the card accept RST_n signal, send it. */ + mmc_set_clock(host, host->f_init); + host->ops->hw_reset(host); + /* Set initial state and call mmc_set_ios */ + mmc_set_initial_state(host); + } else { + /* Do a brute force power cycle */ + mmc_power_cycle(host, card->ocr); + mmc_pwrseq_reset(host); + } + return mmc_init_card(host, card->ocr, card); +} + +static const struct mmc_bus_ops mmc_ops = { + .remove = mmc_remove, + .detect = mmc_detect, + .suspend = mmc_suspend, + .resume = mmc_resume, + .runtime_suspend = mmc_runtime_suspend, + .runtime_resume = mmc_runtime_resume, + .alive = mmc_alive, + .shutdown = mmc_shutdown, + .hw_reset = _mmc_hw_reset, + .cache_enabled = _mmc_cache_enabled, +}; + +/* + * Starting point for MMC card init. + */ +int mmc_attach_mmc(struct mmc_host *host) +{ + int err; + u32 ocr, rocr; + + WARN_ON(!host->claimed); + + /* Set correct bus mode for MMC before attempting attach */ + if (!mmc_host_is_spi(host)) + mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN); + + err = mmc_send_op_cond(host, 0, &ocr); + if (err) + return err; + + mmc_attach_bus(host, &mmc_ops); + if (host->ocr_avail_mmc) + host->ocr_avail = host->ocr_avail_mmc; + + /* + * We need to get OCR a different way for SPI. + */ + if (mmc_host_is_spi(host)) { + err = mmc_spi_read_ocr(host, 1, &ocr); + if (err) + goto err; + } + + rocr = mmc_select_voltage(host, ocr); + + /* + * Can we support the voltage of the card? + */ + if (!rocr) { + err = -EINVAL; + goto err; + } + + /* + * Detect and init the card. + */ + err = mmc_init_card(host, rocr, NULL); + if (err) + goto err; + + mmc_release_host(host); + err = mmc_add_card(host->card); + if (err) + goto remove_card; + + mmc_claim_host(host); + return 0; + +remove_card: + mmc_remove_card(host->card); + mmc_claim_host(host); + host->card = NULL; +err: + mmc_detach_bus(host); + + pr_err("%s: error %d whilst initialising MMC card\n", + mmc_hostname(host), err); + + return err; +} diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c new file mode 100644 index 000000000..b6bb7f7fa --- /dev/null +++ b/drivers/mmc/core/mmc_ops.c @@ -0,0 +1,1065 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * linux/drivers/mmc/core/mmc_ops.h + * + * Copyright 2006-2007 Pierre Ossman + */ + +#include <linux/slab.h> +#include <linux/export.h> +#include <linux/types.h> +#include <linux/scatterlist.h> + +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/mmc.h> + +#include "core.h" +#include "card.h" +#include "host.h" +#include "mmc_ops.h" + +#define MMC_BKOPS_TIMEOUT_MS (120 * 1000) /* 120s */ +#define MMC_CACHE_FLUSH_TIMEOUT_MS (30 * 1000) /* 30s */ +#define MMC_SANITIZE_TIMEOUT_MS (240 * 1000) /* 240s */ + +static const u8 tuning_blk_pattern_4bit[] = { + 0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc, + 0xc3, 0x3c, 0xcc, 0xff, 0xfe, 0xff, 0xfe, 0xef, + 0xff, 0xdf, 0xff, 0xdd, 0xff, 0xfb, 0xff, 0xfb, + 0xbf, 0xff, 0x7f, 0xff, 0x77, 0xf7, 0xbd, 0xef, + 0xff, 0xf0, 0xff, 0xf0, 0x0f, 0xfc, 0xcc, 0x3c, + 0xcc, 0x33, 0xcc, 0xcf, 0xff, 0xef, 0xff, 0xee, + 0xff, 0xfd, 0xff, 0xfd, 0xdf, 0xff, 0xbf, 0xff, + 0xbb, 0xff, 0xf7, 0xff, 0xf7, 0x7f, 0x7b, 0xde, +}; + +static const u8 tuning_blk_pattern_8bit[] = { + 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00, + 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, 0xcc, + 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, 0xff, + 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, 0xff, + 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, 0xdd, + 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, 0xbb, + 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, 0xff, + 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, 0xff, + 0xff, 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, + 0x00, 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, + 0xcc, 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, + 0xff, 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, + 0xff, 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, + 0xdd, 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, + 0xbb, 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, + 0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, +}; + +int __mmc_send_status(struct mmc_card *card, u32 *status, unsigned int retries) +{ + int err; + struct mmc_command cmd = {}; + + cmd.opcode = MMC_SEND_STATUS; + if (!mmc_host_is_spi(card->host)) + cmd.arg = card->rca << 16; + cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC; + + err = mmc_wait_for_cmd(card->host, &cmd, retries); + if (err) + return err; + + /* NOTE: callers are required to understand the difference + * between "native" and SPI format status words! + */ + if (status) + *status = cmd.resp[0]; + + return 0; +} +EXPORT_SYMBOL_GPL(__mmc_send_status); + +int mmc_send_status(struct mmc_card *card, u32 *status) +{ + return __mmc_send_status(card, status, MMC_CMD_RETRIES); +} +EXPORT_SYMBOL_GPL(mmc_send_status); + +static int _mmc_select_card(struct mmc_host *host, struct mmc_card *card) +{ + struct mmc_command cmd = {}; + + cmd.opcode = MMC_SELECT_CARD; + + if (card) { + cmd.arg = card->rca << 16; + cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; + } else { + cmd.arg = 0; + cmd.flags = MMC_RSP_NONE | MMC_CMD_AC; + } + + return mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); +} + +int mmc_select_card(struct mmc_card *card) +{ + + return _mmc_select_card(card->host, card); +} + +int mmc_deselect_cards(struct mmc_host *host) +{ + return _mmc_select_card(host, NULL); +} + +/* + * Write the value specified in the device tree or board code into the optional + * 16 bit Driver Stage Register. This can be used to tune raise/fall times and + * drive strength of the DAT and CMD outputs. The actual meaning of a given + * value is hardware dependant. + * The presence of the DSR register can be determined from the CSD register, + * bit 76. + */ +int mmc_set_dsr(struct mmc_host *host) +{ + struct mmc_command cmd = {}; + + cmd.opcode = MMC_SET_DSR; + + cmd.arg = (host->dsr << 16) | 0xffff; + cmd.flags = MMC_RSP_NONE | MMC_CMD_AC; + + return mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); +} + +int mmc_go_idle(struct mmc_host *host) +{ + int err; + struct mmc_command cmd = {}; + + /* + * Non-SPI hosts need to prevent chipselect going active during + * GO_IDLE; that would put chips into SPI mode. Remind them of + * that in case of hardware that won't pull up DAT3/nCS otherwise. + * + * SPI hosts ignore ios.chip_select; it's managed according to + * rules that must accommodate non-MMC slaves which this layer + * won't even know about. + */ + if (!mmc_host_is_spi(host)) { + mmc_set_chip_select(host, MMC_CS_HIGH); + mmc_delay(1); + } + + cmd.opcode = MMC_GO_IDLE_STATE; + cmd.arg = 0; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC; + + err = mmc_wait_for_cmd(host, &cmd, 0); + + mmc_delay(1); + + if (!mmc_host_is_spi(host)) { + mmc_set_chip_select(host, MMC_CS_DONTCARE); + mmc_delay(1); + } + + host->use_spi_crc = 0; + + return err; +} + +int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) +{ + struct mmc_command cmd = {}; + int i, err = 0; + + cmd.opcode = MMC_SEND_OP_COND; + cmd.arg = mmc_host_is_spi(host) ? 0 : ocr; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR; + + for (i = 100; i; i--) { + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) + break; + + /* wait until reset completes */ + if (mmc_host_is_spi(host)) { + if (!(cmd.resp[0] & R1_SPI_IDLE)) + break; + } else { + if (cmd.resp[0] & MMC_CARD_BUSY) + break; + } + + err = -ETIMEDOUT; + + mmc_delay(10); + + /* + * According to eMMC specification v5.1 section 6.4.3, we + * should issue CMD1 repeatedly in the idle state until + * the eMMC is ready. Otherwise some eMMC devices seem to enter + * the inactive mode after mmc_init_card() issued CMD0 when + * the eMMC device is busy. + */ + if (!ocr && !mmc_host_is_spi(host)) + cmd.arg = cmd.resp[0] | BIT(30); + } + + if (rocr && !mmc_host_is_spi(host)) + *rocr = cmd.resp[0]; + + return err; +} + +int mmc_set_relative_addr(struct mmc_card *card) +{ + struct mmc_command cmd = {}; + + cmd.opcode = MMC_SET_RELATIVE_ADDR; + cmd.arg = card->rca << 16; + cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; + + return mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES); +} + +static int +mmc_send_cxd_native(struct mmc_host *host, u32 arg, u32 *cxd, int opcode) +{ + int err; + struct mmc_command cmd = {}; + + cmd.opcode = opcode; + cmd.arg = arg; + cmd.flags = MMC_RSP_R2 | MMC_CMD_AC; + + err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); + if (err) + return err; + + memcpy(cxd, cmd.resp, sizeof(u32) * 4); + + return 0; +} + +/* + * NOTE: void *buf, caller for the buf is required to use DMA-capable + * buffer or on-stack buffer (with some overhead in callee). + */ +static int +mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host, + u32 opcode, void *buf, unsigned len) +{ + struct mmc_request mrq = {}; + struct mmc_command cmd = {}; + struct mmc_data data = {}; + struct scatterlist sg; + + mrq.cmd = &cmd; + mrq.data = &data; + + cmd.opcode = opcode; + cmd.arg = 0; + + /* NOTE HACK: the MMC_RSP_SPI_R1 is always correct here, but we + * rely on callers to never use this with "native" calls for reading + * CSD or CID. Native versions of those commands use the R2 type, + * not R1 plus a data block. + */ + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; + + data.blksz = len; + data.blocks = 1; + data.flags = MMC_DATA_READ; + data.sg = &sg; + data.sg_len = 1; + + sg_init_one(&sg, buf, len); + + if (opcode == MMC_SEND_CSD || opcode == MMC_SEND_CID) { + /* + * The spec states that CSR and CID accesses have a timeout + * of 64 clock cycles. + */ + data.timeout_ns = 0; + data.timeout_clks = 64; + } else + mmc_set_data_timeout(&data, card); + + mmc_wait_for_req(host, &mrq); + + if (cmd.error) + return cmd.error; + if (data.error) + return data.error; + + return 0; +} + +static int mmc_spi_send_csd(struct mmc_card *card, u32 *csd) +{ + int ret, i; + __be32 *csd_tmp; + + csd_tmp = kzalloc(16, GFP_KERNEL); + if (!csd_tmp) + return -ENOMEM; + + ret = mmc_send_cxd_data(card, card->host, MMC_SEND_CSD, csd_tmp, 16); + if (ret) + goto err; + + for (i = 0; i < 4; i++) + csd[i] = be32_to_cpu(csd_tmp[i]); + +err: + kfree(csd_tmp); + return ret; +} + +int mmc_send_csd(struct mmc_card *card, u32 *csd) +{ + if (mmc_host_is_spi(card->host)) + return mmc_spi_send_csd(card, csd); + + return mmc_send_cxd_native(card->host, card->rca << 16, csd, + MMC_SEND_CSD); +} + +static int mmc_spi_send_cid(struct mmc_host *host, u32 *cid) +{ + int ret, i; + __be32 *cid_tmp; + + cid_tmp = kzalloc(16, GFP_KERNEL); + if (!cid_tmp) + return -ENOMEM; + + ret = mmc_send_cxd_data(NULL, host, MMC_SEND_CID, cid_tmp, 16); + if (ret) + goto err; + + for (i = 0; i < 4; i++) + cid[i] = be32_to_cpu(cid_tmp[i]); + +err: + kfree(cid_tmp); + return ret; +} + +int mmc_send_cid(struct mmc_host *host, u32 *cid) +{ + if (mmc_host_is_spi(host)) + return mmc_spi_send_cid(host, cid); + + return mmc_send_cxd_native(host, 0, cid, MMC_ALL_SEND_CID); +} + +int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd) +{ + int err; + u8 *ext_csd; + + if (!card || !new_ext_csd) + return -EINVAL; + + if (!mmc_can_ext_csd(card)) + return -EOPNOTSUPP; + + /* + * As the ext_csd is so large and mostly unused, we don't store the + * raw block in mmc_card. + */ + ext_csd = kzalloc(512, GFP_KERNEL); + if (!ext_csd) + return -ENOMEM; + + err = mmc_send_cxd_data(card, card->host, MMC_SEND_EXT_CSD, ext_csd, + 512); + if (err) + kfree(ext_csd); + else + *new_ext_csd = ext_csd; + + return err; +} +EXPORT_SYMBOL_GPL(mmc_get_ext_csd); + +int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp) +{ + struct mmc_command cmd = {}; + int err; + + cmd.opcode = MMC_SPI_READ_OCR; + cmd.arg = highcap ? (1 << 30) : 0; + cmd.flags = MMC_RSP_SPI_R3; + + err = mmc_wait_for_cmd(host, &cmd, 0); + + *ocrp = cmd.resp[1]; + return err; +} + +int mmc_spi_set_crc(struct mmc_host *host, int use_crc) +{ + struct mmc_command cmd = {}; + int err; + + cmd.opcode = MMC_SPI_CRC_ON_OFF; + cmd.flags = MMC_RSP_SPI_R1; + cmd.arg = use_crc; + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (!err) + host->use_spi_crc = use_crc; + return err; +} + +static int mmc_switch_status_error(struct mmc_host *host, u32 status) +{ + if (mmc_host_is_spi(host)) { + if (status & R1_SPI_ILLEGAL_COMMAND) + return -EBADMSG; + } else { + if (R1_STATUS(status)) + pr_warn("%s: unexpected status %#x after switch\n", + mmc_hostname(host), status); + if (status & R1_SWITCH_ERROR) + return -EBADMSG; + } + return 0; +} + +/* Caller must hold re-tuning */ +int mmc_switch_status(struct mmc_card *card, bool crc_err_fatal) +{ + u32 status; + int err; + + err = mmc_send_status(card, &status); + if (!crc_err_fatal && err == -EILSEQ) + return 0; + if (err) + return err; + + return mmc_switch_status_error(card->host, status); +} + +static int mmc_busy_status(struct mmc_card *card, bool retry_crc_err, + enum mmc_busy_cmd busy_cmd, bool *busy) +{ + struct mmc_host *host = card->host; + u32 status = 0; + int err; + + if (busy_cmd != MMC_BUSY_IO && host->ops->card_busy) { + *busy = host->ops->card_busy(host); + return 0; + } + + err = mmc_send_status(card, &status); + if (retry_crc_err && err == -EILSEQ) { + *busy = true; + return 0; + } + if (err) + return err; + + switch (busy_cmd) { + case MMC_BUSY_CMD6: + err = mmc_switch_status_error(card->host, status); + break; + case MMC_BUSY_ERASE: + err = R1_STATUS(status) ? -EIO : 0; + break; + case MMC_BUSY_HPI: + case MMC_BUSY_IO: + break; + default: + err = -EINVAL; + } + + if (err) + return err; + + *busy = !mmc_ready_for_data(status); + return 0; +} + +static int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms, + bool send_status, bool retry_crc_err, + enum mmc_busy_cmd busy_cmd) +{ + struct mmc_host *host = card->host; + int err; + unsigned long timeout; + unsigned int udelay = 32, udelay_max = 32768; + bool expired = false; + bool busy = false; + + /* + * In cases when not allowed to poll by using CMD13 or because we aren't + * capable of polling by using ->card_busy(), then rely on waiting the + * stated timeout to be sufficient. + */ + if (!send_status && !host->ops->card_busy) { + mmc_delay(timeout_ms); + return 0; + } + + timeout = jiffies + msecs_to_jiffies(timeout_ms) + 1; + do { + /* + * Due to the possibility of being preempted while polling, + * check the expiration time first. + */ + expired = time_after(jiffies, timeout); + + err = mmc_busy_status(card, retry_crc_err, busy_cmd, &busy); + if (err) + return err; + + /* Timeout if the device still remains busy. */ + if (expired && busy) { + pr_err("%s: Card stuck being busy! %s\n", + mmc_hostname(host), __func__); + return -ETIMEDOUT; + } + + /* Throttle the polling rate to avoid hogging the CPU. */ + if (busy) { + usleep_range(udelay, udelay * 2); + if (udelay < udelay_max) + udelay *= 2; + } + } while (busy); + + return 0; +} + +int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms, + enum mmc_busy_cmd busy_cmd) +{ + return __mmc_poll_for_busy(card, timeout_ms, true, false, busy_cmd); +} + +/** + * __mmc_switch - modify EXT_CSD register + * @card: the MMC card associated with the data transfer + * @set: cmd set values + * @index: EXT_CSD register index + * @value: value to program into EXT_CSD register + * @timeout_ms: timeout (ms) for operation performed by register write, + * timeout of zero implies maximum possible timeout + * @timing: new timing to change to + * @send_status: send status cmd to poll for busy + * @retry_crc_err: retry when CRC errors when polling with CMD13 for busy + * + * Modifies the EXT_CSD register for selected card. + */ +int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, + unsigned int timeout_ms, unsigned char timing, + bool send_status, bool retry_crc_err) +{ + struct mmc_host *host = card->host; + int err; + struct mmc_command cmd = {}; + bool use_r1b_resp = true; + unsigned char old_timing = host->ios.timing; + + mmc_retune_hold(host); + + if (!timeout_ms) { + pr_warn("%s: unspecified timeout for CMD6 - use generic\n", + mmc_hostname(host)); + timeout_ms = card->ext_csd.generic_cmd6_time; + } + + /* + * If the max_busy_timeout of the host is specified, make sure it's + * enough to fit the used timeout_ms. In case it's not, let's instruct + * the host to avoid HW busy detection, by converting to a R1 response + * instead of a R1B. Note, some hosts requires R1B, which also means + * they are on their own when it comes to deal with the busy timeout. + */ + if (!(host->caps & MMC_CAP_NEED_RSP_BUSY) && host->max_busy_timeout && + (timeout_ms > host->max_busy_timeout)) + use_r1b_resp = false; + + cmd.opcode = MMC_SWITCH; + cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | + (index << 16) | + (value << 8) | + set; + cmd.flags = MMC_CMD_AC; + if (use_r1b_resp) { + cmd.flags |= MMC_RSP_SPI_R1B | MMC_RSP_R1B; + cmd.busy_timeout = timeout_ms; + } else { + cmd.flags |= MMC_RSP_SPI_R1 | MMC_RSP_R1; + } + + err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); + if (err) + goto out; + + /*If SPI or used HW busy detection above, then we don't need to poll. */ + if (((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp) || + mmc_host_is_spi(host)) + goto out_tim; + + /* Let's try to poll to find out when the command is completed. */ + err = __mmc_poll_for_busy(card, timeout_ms, send_status, retry_crc_err, + MMC_BUSY_CMD6); + if (err) + goto out; + +out_tim: + /* Switch to new timing before check switch status. */ + if (timing) + mmc_set_timing(host, timing); + + if (send_status) { + err = mmc_switch_status(card, true); + if (err && timing) + mmc_set_timing(host, old_timing); + } +out: + mmc_retune_release(host); + + return err; +} + +int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, + unsigned int timeout_ms) +{ + return __mmc_switch(card, set, index, value, timeout_ms, 0, + true, false); +} +EXPORT_SYMBOL_GPL(mmc_switch); + +int mmc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error) +{ + struct mmc_request mrq = {}; + struct mmc_command cmd = {}; + struct mmc_data data = {}; + struct scatterlist sg; + struct mmc_ios *ios = &host->ios; + const u8 *tuning_block_pattern; + int size, err = 0; + u8 *data_buf; + + if (ios->bus_width == MMC_BUS_WIDTH_8) { + tuning_block_pattern = tuning_blk_pattern_8bit; + size = sizeof(tuning_blk_pattern_8bit); + } else if (ios->bus_width == MMC_BUS_WIDTH_4) { + tuning_block_pattern = tuning_blk_pattern_4bit; + size = sizeof(tuning_blk_pattern_4bit); + } else + return -EINVAL; + + data_buf = kzalloc(size, GFP_KERNEL); + if (!data_buf) + return -ENOMEM; + + mrq.cmd = &cmd; + mrq.data = &data; + + cmd.opcode = opcode; + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + + data.blksz = size; + data.blocks = 1; + data.flags = MMC_DATA_READ; + + /* + * According to the tuning specs, Tuning process + * is normally shorter 40 executions of CMD19, + * and timeout value should be shorter than 150 ms + */ + data.timeout_ns = 150 * NSEC_PER_MSEC; + + data.sg = &sg; + data.sg_len = 1; + sg_init_one(&sg, data_buf, size); + + mmc_wait_for_req(host, &mrq); + + if (cmd_error) + *cmd_error = cmd.error; + + if (cmd.error) { + err = cmd.error; + goto out; + } + + if (data.error) { + err = data.error; + goto out; + } + + if (memcmp(data_buf, tuning_block_pattern, size)) + err = -EIO; + +out: + kfree(data_buf); + return err; +} +EXPORT_SYMBOL_GPL(mmc_send_tuning); + +int mmc_abort_tuning(struct mmc_host *host, u32 opcode) +{ + struct mmc_command cmd = {}; + + /* + * eMMC specification specifies that CMD12 can be used to stop a tuning + * command, but SD specification does not, so do nothing unless it is + * eMMC. + */ + if (opcode != MMC_SEND_TUNING_BLOCK_HS200) + return 0; + + cmd.opcode = MMC_STOP_TRANSMISSION; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + + /* + * For drivers that override R1 to R1b, set an arbitrary timeout based + * on the tuning timeout i.e. 150ms. + */ + cmd.busy_timeout = 150; + + return mmc_wait_for_cmd(host, &cmd, 0); +} +EXPORT_SYMBOL_GPL(mmc_abort_tuning); + +static int +mmc_send_bus_test(struct mmc_card *card, struct mmc_host *host, u8 opcode, + u8 len) +{ + struct mmc_request mrq = {}; + struct mmc_command cmd = {}; + struct mmc_data data = {}; + struct scatterlist sg; + u8 *data_buf; + u8 *test_buf; + int i, err; + static u8 testdata_8bit[8] = { 0x55, 0xaa, 0, 0, 0, 0, 0, 0 }; + static u8 testdata_4bit[4] = { 0x5a, 0, 0, 0 }; + + /* dma onto stack is unsafe/nonportable, but callers to this + * routine normally provide temporary on-stack buffers ... + */ + data_buf = kmalloc(len, GFP_KERNEL); + if (!data_buf) + return -ENOMEM; + + if (len == 8) + test_buf = testdata_8bit; + else if (len == 4) + test_buf = testdata_4bit; + else { + pr_err("%s: Invalid bus_width %d\n", + mmc_hostname(host), len); + kfree(data_buf); + return -EINVAL; + } + + if (opcode == MMC_BUS_TEST_W) + memcpy(data_buf, test_buf, len); + + mrq.cmd = &cmd; + mrq.data = &data; + cmd.opcode = opcode; + cmd.arg = 0; + + /* NOTE HACK: the MMC_RSP_SPI_R1 is always correct here, but we + * rely on callers to never use this with "native" calls for reading + * CSD or CID. Native versions of those commands use the R2 type, + * not R1 plus a data block. + */ + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; + + data.blksz = len; + data.blocks = 1; + if (opcode == MMC_BUS_TEST_R) + data.flags = MMC_DATA_READ; + else + data.flags = MMC_DATA_WRITE; + + data.sg = &sg; + data.sg_len = 1; + mmc_set_data_timeout(&data, card); + sg_init_one(&sg, data_buf, len); + mmc_wait_for_req(host, &mrq); + err = 0; + if (opcode == MMC_BUS_TEST_R) { + for (i = 0; i < len / 4; i++) + if ((test_buf[i] ^ data_buf[i]) != 0xff) { + err = -EIO; + break; + } + } + kfree(data_buf); + + if (cmd.error) + return cmd.error; + if (data.error) + return data.error; + + return err; +} + +int mmc_bus_test(struct mmc_card *card, u8 bus_width) +{ + int width; + + if (bus_width == MMC_BUS_WIDTH_8) + width = 8; + else if (bus_width == MMC_BUS_WIDTH_4) + width = 4; + else if (bus_width == MMC_BUS_WIDTH_1) + return 0; /* no need for test */ + else + return -EINVAL; + + /* + * Ignore errors from BUS_TEST_W. BUS_TEST_R will fail if there + * is a problem. This improves chances that the test will work. + */ + mmc_send_bus_test(card, card->host, MMC_BUS_TEST_W, width); + return mmc_send_bus_test(card, card->host, MMC_BUS_TEST_R, width); +} + +static int mmc_send_hpi_cmd(struct mmc_card *card) +{ + unsigned int busy_timeout_ms = card->ext_csd.out_of_int_time; + struct mmc_host *host = card->host; + bool use_r1b_resp = true; + struct mmc_command cmd = {}; + int err; + + cmd.opcode = card->ext_csd.hpi_cmd; + cmd.arg = card->rca << 16 | 1; + + /* + * Make sure the host's max_busy_timeout fit the needed timeout for HPI. + * In case it doesn't, let's instruct the host to avoid HW busy + * detection, by using a R1 response instead of R1B. + */ + if (host->max_busy_timeout && busy_timeout_ms > host->max_busy_timeout) + use_r1b_resp = false; + + if (cmd.opcode == MMC_STOP_TRANSMISSION && use_r1b_resp) { + cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; + cmd.busy_timeout = busy_timeout_ms; + } else { + cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; + use_r1b_resp = false; + } + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) { + pr_warn("%s: HPI error %d. Command response %#x\n", + mmc_hostname(host), err, cmd.resp[0]); + return err; + } + + /* No need to poll when using HW busy detection. */ + if (host->caps & MMC_CAP_WAIT_WHILE_BUSY && use_r1b_resp) + return 0; + + /* Let's poll to find out when the HPI request completes. */ + return mmc_poll_for_busy(card, busy_timeout_ms, MMC_BUSY_HPI); +} + +/** + * mmc_interrupt_hpi - Issue for High priority Interrupt + * @card: the MMC card associated with the HPI transfer + * + * Issued High Priority Interrupt, and check for card status + * until out-of prg-state. + */ +static int mmc_interrupt_hpi(struct mmc_card *card) +{ + int err; + u32 status; + + if (!card->ext_csd.hpi_en) { + pr_info("%s: HPI enable bit unset\n", mmc_hostname(card->host)); + return 1; + } + + err = mmc_send_status(card, &status); + if (err) { + pr_err("%s: Get card status fail\n", mmc_hostname(card->host)); + goto out; + } + + switch (R1_CURRENT_STATE(status)) { + case R1_STATE_IDLE: + case R1_STATE_READY: + case R1_STATE_STBY: + case R1_STATE_TRAN: + /* + * In idle and transfer states, HPI is not needed and the caller + * can issue the next intended command immediately + */ + goto out; + case R1_STATE_PRG: + break; + default: + /* In all other states, it's illegal to issue HPI */ + pr_debug("%s: HPI cannot be sent. Card state=%d\n", + mmc_hostname(card->host), R1_CURRENT_STATE(status)); + err = -EINVAL; + goto out; + } + + err = mmc_send_hpi_cmd(card); +out: + return err; +} + +int mmc_can_ext_csd(struct mmc_card *card) +{ + return (card && card->csd.mmca_vsn > CSD_SPEC_VER_3); +} + +static int mmc_read_bkops_status(struct mmc_card *card) +{ + int err; + u8 *ext_csd; + + err = mmc_get_ext_csd(card, &ext_csd); + if (err) + return err; + + card->ext_csd.raw_bkops_status = ext_csd[EXT_CSD_BKOPS_STATUS]; + card->ext_csd.raw_exception_status = ext_csd[EXT_CSD_EXP_EVENTS_STATUS]; + kfree(ext_csd); + return 0; +} + +/** + * mmc_run_bkops - Run BKOPS for supported cards + * @card: MMC card to run BKOPS for + * + * Run background operations synchronously for cards having manual BKOPS + * enabled and in case it reports urgent BKOPS level. +*/ +void mmc_run_bkops(struct mmc_card *card) +{ + int err; + + if (!card->ext_csd.man_bkops_en) + return; + + err = mmc_read_bkops_status(card); + if (err) { + pr_err("%s: Failed to read bkops status: %d\n", + mmc_hostname(card->host), err); + return; + } + + if (!card->ext_csd.raw_bkops_status || + card->ext_csd.raw_bkops_status < EXT_CSD_BKOPS_LEVEL_2) + return; + + mmc_retune_hold(card->host); + + /* + * For urgent BKOPS status, LEVEL_2 and higher, let's execute + * synchronously. Future wise, we may consider to start BKOPS, for less + * urgent levels by using an asynchronous background task, when idle. + */ + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BKOPS_START, 1, MMC_BKOPS_TIMEOUT_MS); + if (err) + pr_warn("%s: Error %d starting bkops\n", + mmc_hostname(card->host), err); + + mmc_retune_release(card->host); +} +EXPORT_SYMBOL(mmc_run_bkops); + +/* + * Flush the cache to the non-volatile storage. + */ +int mmc_flush_cache(struct mmc_card *card) +{ + int err = 0; + + if (mmc_cache_enabled(card->host)) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_FLUSH_CACHE, 1, + MMC_CACHE_FLUSH_TIMEOUT_MS); + if (err) + pr_err("%s: cache flush error %d\n", + mmc_hostname(card->host), err); + } + + return err; +} +EXPORT_SYMBOL(mmc_flush_cache); + +static int mmc_cmdq_switch(struct mmc_card *card, bool enable) +{ + u8 val = enable ? EXT_CSD_CMDQ_MODE_ENABLED : 0; + int err; + + if (!card->ext_csd.cmdq_support) + return -EOPNOTSUPP; + + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_CMDQ_MODE_EN, + val, card->ext_csd.generic_cmd6_time); + if (!err) + card->ext_csd.cmdq_en = enable; + + return err; +} + +int mmc_cmdq_enable(struct mmc_card *card) +{ + return mmc_cmdq_switch(card, true); +} +EXPORT_SYMBOL_GPL(mmc_cmdq_enable); + +int mmc_cmdq_disable(struct mmc_card *card) +{ + return mmc_cmdq_switch(card, false); +} +EXPORT_SYMBOL_GPL(mmc_cmdq_disable); + +int mmc_sanitize(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + int err; + + if (!mmc_can_sanitize(card)) { + pr_warn("%s: Sanitize not supported\n", mmc_hostname(host)); + return -EOPNOTSUPP; + } + + pr_debug("%s: Sanitize in progress...\n", mmc_hostname(host)); + + mmc_retune_hold(host); + + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_SANITIZE_START, + 1, MMC_SANITIZE_TIMEOUT_MS); + if (err) + pr_err("%s: Sanitize failed err=%d\n", mmc_hostname(host), err); + + /* + * If the sanitize operation timed out, the card is probably still busy + * in the R1_STATE_PRG. Rather than continue to wait, let's try to abort + * it with a HPI command to get back into R1_STATE_TRAN. + */ + if (err == -ETIMEDOUT && !mmc_interrupt_hpi(card)) + pr_warn("%s: Sanitize aborted\n", mmc_hostname(host)); + + mmc_retune_release(host); + + pr_debug("%s: Sanitize completed\n", mmc_hostname(host)); + return err; +} +EXPORT_SYMBOL_GPL(mmc_sanitize); diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h new file mode 100644 index 000000000..e3cbb1ddc --- /dev/null +++ b/drivers/mmc/core/mmc_ops.h @@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * linux/drivers/mmc/core/mmc_ops.h + * + * Copyright 2006-2007 Pierre Ossman + */ + +#ifndef _MMC_MMC_OPS_H +#define _MMC_MMC_OPS_H + +#include <linux/types.h> + +enum mmc_busy_cmd { + MMC_BUSY_CMD6, + MMC_BUSY_ERASE, + MMC_BUSY_HPI, + MMC_BUSY_IO, +}; + +struct mmc_host; +struct mmc_card; + +int mmc_select_card(struct mmc_card *card); +int mmc_deselect_cards(struct mmc_host *host); +int mmc_set_dsr(struct mmc_host *host); +int mmc_go_idle(struct mmc_host *host); +int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr); +int mmc_set_relative_addr(struct mmc_card *card); +int mmc_send_csd(struct mmc_card *card, u32 *csd); +int __mmc_send_status(struct mmc_card *card, u32 *status, unsigned int retries); +int mmc_send_status(struct mmc_card *card, u32 *status); +int mmc_send_cid(struct mmc_host *host, u32 *cid); +int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp); +int mmc_spi_set_crc(struct mmc_host *host, int use_crc); +int mmc_bus_test(struct mmc_card *card, u8 bus_width); +int mmc_can_ext_csd(struct mmc_card *card); +int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd); +int mmc_switch_status(struct mmc_card *card, bool crc_err_fatal); +int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms, + enum mmc_busy_cmd busy_cmd); +int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, + unsigned int timeout_ms, unsigned char timing, + bool send_status, bool retry_crc_err); +int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, + unsigned int timeout_ms); +void mmc_run_bkops(struct mmc_card *card); +int mmc_flush_cache(struct mmc_card *card); +int mmc_cmdq_enable(struct mmc_card *card); +int mmc_cmdq_disable(struct mmc_card *card); +int mmc_sanitize(struct mmc_card *card); + +#endif + diff --git a/drivers/mmc/core/mmc_test.c b/drivers/mmc/core/mmc_test.c new file mode 100644 index 000000000..b9b6f0001 --- /dev/null +++ b/drivers/mmc/core/mmc_test.c @@ -0,0 +1,3303 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2007-2008 Pierre Ossman + */ + +#include <linux/mmc/core.h> +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/slab.h> + +#include <linux/scatterlist.h> +#include <linux/swap.h> /* For nr_free_buffer_pages() */ +#include <linux/list.h> + +#include <linux/debugfs.h> +#include <linux/uaccess.h> +#include <linux/seq_file.h> +#include <linux/module.h> + +#include "core.h" +#include "card.h" +#include "host.h" +#include "bus.h" +#include "mmc_ops.h" + +#define RESULT_OK 0 +#define RESULT_FAIL 1 +#define RESULT_UNSUP_HOST 2 +#define RESULT_UNSUP_CARD 3 + +#define BUFFER_ORDER 2 +#define BUFFER_SIZE (PAGE_SIZE << BUFFER_ORDER) + +#define TEST_ALIGN_END 8 + +/* + * Limit the test area size to the maximum MMC HC erase group size. Note that + * the maximum SD allocation unit size is just 4MiB. + */ +#define TEST_AREA_MAX_SIZE (128 * 1024 * 1024) + +/** + * struct mmc_test_pages - pages allocated by 'alloc_pages()'. + * @page: first page in the allocation + * @order: order of the number of pages allocated + */ +struct mmc_test_pages { + struct page *page; + unsigned int order; +}; + +/** + * struct mmc_test_mem - allocated memory. + * @arr: array of allocations + * @cnt: number of allocations + */ +struct mmc_test_mem { + struct mmc_test_pages *arr; + unsigned int cnt; +}; + +/** + * struct mmc_test_area - information for performance tests. + * @max_sz: test area size (in bytes) + * @dev_addr: address on card at which to do performance tests + * @max_tfr: maximum transfer size allowed by driver (in bytes) + * @max_segs: maximum segments allowed by driver in scatterlist @sg + * @max_seg_sz: maximum segment size allowed by driver + * @blocks: number of (512 byte) blocks currently mapped by @sg + * @sg_len: length of currently mapped scatterlist @sg + * @mem: allocated memory + * @sg: scatterlist + * @sg_areq: scatterlist for non-blocking request + */ +struct mmc_test_area { + unsigned long max_sz; + unsigned int dev_addr; + unsigned int max_tfr; + unsigned int max_segs; + unsigned int max_seg_sz; + unsigned int blocks; + unsigned int sg_len; + struct mmc_test_mem *mem; + struct scatterlist *sg; + struct scatterlist *sg_areq; +}; + +/** + * struct mmc_test_transfer_result - transfer results for performance tests. + * @link: double-linked list + * @count: amount of group of sectors to check + * @sectors: amount of sectors to check in one group + * @ts: time values of transfer + * @rate: calculated transfer rate + * @iops: I/O operations per second (times 100) + */ +struct mmc_test_transfer_result { + struct list_head link; + unsigned int count; + unsigned int sectors; + struct timespec64 ts; + unsigned int rate; + unsigned int iops; +}; + +/** + * struct mmc_test_general_result - results for tests. + * @link: double-linked list + * @card: card under test + * @testcase: number of test case + * @result: result of test run + * @tr_lst: transfer measurements if any as mmc_test_transfer_result + */ +struct mmc_test_general_result { + struct list_head link; + struct mmc_card *card; + int testcase; + int result; + struct list_head tr_lst; +}; + +/** + * struct mmc_test_dbgfs_file - debugfs related file. + * @link: double-linked list + * @card: card under test + * @file: file created under debugfs + */ +struct mmc_test_dbgfs_file { + struct list_head link; + struct mmc_card *card; + struct dentry *file; +}; + +/** + * struct mmc_test_card - test information. + * @card: card under test + * @scratch: transfer buffer + * @buffer: transfer buffer + * @highmem: buffer for highmem tests + * @area: information for performance tests + * @gr: pointer to results of current testcase + */ +struct mmc_test_card { + struct mmc_card *card; + + u8 scratch[BUFFER_SIZE]; + u8 *buffer; +#ifdef CONFIG_HIGHMEM + struct page *highmem; +#endif + struct mmc_test_area area; + struct mmc_test_general_result *gr; +}; + +enum mmc_test_prep_media { + MMC_TEST_PREP_NONE = 0, + MMC_TEST_PREP_WRITE_FULL = 1 << 0, + MMC_TEST_PREP_ERASE = 1 << 1, +}; + +struct mmc_test_multiple_rw { + unsigned int *sg_len; + unsigned int *bs; + unsigned int len; + unsigned int size; + bool do_write; + bool do_nonblock_req; + enum mmc_test_prep_media prepare; +}; + +/*******************************************************************/ +/* General helper functions */ +/*******************************************************************/ + +/* + * Configure correct block size in card + */ +static int mmc_test_set_blksize(struct mmc_test_card *test, unsigned size) +{ + return mmc_set_blocklen(test->card, size); +} + +static bool mmc_test_card_cmd23(struct mmc_card *card) +{ + return mmc_card_mmc(card) || + (mmc_card_sd(card) && card->scr.cmds & SD_SCR_CMD23_SUPPORT); +} + +static void mmc_test_prepare_sbc(struct mmc_test_card *test, + struct mmc_request *mrq, unsigned int blocks) +{ + struct mmc_card *card = test->card; + + if (!mrq->sbc || !mmc_host_cmd23(card->host) || + !mmc_test_card_cmd23(card) || !mmc_op_multi(mrq->cmd->opcode) || + (card->quirks & MMC_QUIRK_BLK_NO_CMD23)) { + mrq->sbc = NULL; + return; + } + + mrq->sbc->opcode = MMC_SET_BLOCK_COUNT; + mrq->sbc->arg = blocks; + mrq->sbc->flags = MMC_RSP_R1 | MMC_CMD_AC; +} + +/* + * Fill in the mmc_request structure given a set of transfer parameters. + */ +static void mmc_test_prepare_mrq(struct mmc_test_card *test, + struct mmc_request *mrq, struct scatterlist *sg, unsigned sg_len, + unsigned dev_addr, unsigned blocks, unsigned blksz, int write) +{ + if (WARN_ON(!mrq || !mrq->cmd || !mrq->data || !mrq->stop)) + return; + + if (blocks > 1) { + mrq->cmd->opcode = write ? + MMC_WRITE_MULTIPLE_BLOCK : MMC_READ_MULTIPLE_BLOCK; + } else { + mrq->cmd->opcode = write ? + MMC_WRITE_BLOCK : MMC_READ_SINGLE_BLOCK; + } + + mrq->cmd->arg = dev_addr; + if (!mmc_card_blockaddr(test->card)) + mrq->cmd->arg <<= 9; + + mrq->cmd->flags = MMC_RSP_R1 | MMC_CMD_ADTC; + + if (blocks == 1) + mrq->stop = NULL; + else { + mrq->stop->opcode = MMC_STOP_TRANSMISSION; + mrq->stop->arg = 0; + mrq->stop->flags = MMC_RSP_R1B | MMC_CMD_AC; + } + + mrq->data->blksz = blksz; + mrq->data->blocks = blocks; + mrq->data->flags = write ? MMC_DATA_WRITE : MMC_DATA_READ; + mrq->data->sg = sg; + mrq->data->sg_len = sg_len; + + mmc_test_prepare_sbc(test, mrq, blocks); + + mmc_set_data_timeout(mrq->data, test->card); +} + +static int mmc_test_busy(struct mmc_command *cmd) +{ + return !(cmd->resp[0] & R1_READY_FOR_DATA) || + (R1_CURRENT_STATE(cmd->resp[0]) == R1_STATE_PRG); +} + +/* + * Wait for the card to finish the busy state + */ +static int mmc_test_wait_busy(struct mmc_test_card *test) +{ + int ret, busy; + struct mmc_command cmd = {}; + + busy = 0; + do { + memset(&cmd, 0, sizeof(struct mmc_command)); + + cmd.opcode = MMC_SEND_STATUS; + cmd.arg = test->card->rca << 16; + cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; + + ret = mmc_wait_for_cmd(test->card->host, &cmd, 0); + if (ret) + break; + + if (!busy && mmc_test_busy(&cmd)) { + busy = 1; + if (test->card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) + pr_info("%s: Warning: Host did not wait for busy state to end.\n", + mmc_hostname(test->card->host)); + } + } while (mmc_test_busy(&cmd)); + + return ret; +} + +/* + * Transfer a single sector of kernel addressable data + */ +static int mmc_test_buffer_transfer(struct mmc_test_card *test, + u8 *buffer, unsigned addr, unsigned blksz, int write) +{ + struct mmc_request mrq = {}; + struct mmc_command cmd = {}; + struct mmc_command stop = {}; + struct mmc_data data = {}; + + struct scatterlist sg; + + mrq.cmd = &cmd; + mrq.data = &data; + mrq.stop = &stop; + + sg_init_one(&sg, buffer, blksz); + + mmc_test_prepare_mrq(test, &mrq, &sg, 1, addr, 1, blksz, write); + + mmc_wait_for_req(test->card->host, &mrq); + + if (cmd.error) + return cmd.error; + if (data.error) + return data.error; + + return mmc_test_wait_busy(test); +} + +static void mmc_test_free_mem(struct mmc_test_mem *mem) +{ + if (!mem) + return; + while (mem->cnt--) + __free_pages(mem->arr[mem->cnt].page, + mem->arr[mem->cnt].order); + kfree(mem->arr); + kfree(mem); +} + +/* + * Allocate a lot of memory, preferably max_sz but at least min_sz. In case + * there isn't much memory do not exceed 1/16th total lowmem pages. Also do + * not exceed a maximum number of segments and try not to make segments much + * bigger than maximum segment size. + */ +static struct mmc_test_mem *mmc_test_alloc_mem(unsigned long min_sz, + unsigned long max_sz, + unsigned int max_segs, + unsigned int max_seg_sz) +{ + unsigned long max_page_cnt = DIV_ROUND_UP(max_sz, PAGE_SIZE); + unsigned long min_page_cnt = DIV_ROUND_UP(min_sz, PAGE_SIZE); + unsigned long max_seg_page_cnt = DIV_ROUND_UP(max_seg_sz, PAGE_SIZE); + unsigned long page_cnt = 0; + unsigned long limit = nr_free_buffer_pages() >> 4; + struct mmc_test_mem *mem; + + if (max_page_cnt > limit) + max_page_cnt = limit; + if (min_page_cnt > max_page_cnt) + min_page_cnt = max_page_cnt; + + if (max_seg_page_cnt > max_page_cnt) + max_seg_page_cnt = max_page_cnt; + + if (max_segs > max_page_cnt) + max_segs = max_page_cnt; + + mem = kzalloc(sizeof(*mem), GFP_KERNEL); + if (!mem) + return NULL; + + mem->arr = kcalloc(max_segs, sizeof(*mem->arr), GFP_KERNEL); + if (!mem->arr) + goto out_free; + + while (max_page_cnt) { + struct page *page; + unsigned int order; + gfp_t flags = GFP_KERNEL | GFP_DMA | __GFP_NOWARN | + __GFP_NORETRY; + + order = get_order(max_seg_page_cnt << PAGE_SHIFT); + while (1) { + page = alloc_pages(flags, order); + if (page || !order) + break; + order -= 1; + } + if (!page) { + if (page_cnt < min_page_cnt) + goto out_free; + break; + } + mem->arr[mem->cnt].page = page; + mem->arr[mem->cnt].order = order; + mem->cnt += 1; + if (max_page_cnt <= (1UL << order)) + break; + max_page_cnt -= 1UL << order; + page_cnt += 1UL << order; + if (mem->cnt >= max_segs) { + if (page_cnt < min_page_cnt) + goto out_free; + break; + } + } + + return mem; + +out_free: + mmc_test_free_mem(mem); + return NULL; +} + +/* + * Map memory into a scatterlist. Optionally allow the same memory to be + * mapped more than once. + */ +static int mmc_test_map_sg(struct mmc_test_mem *mem, unsigned long size, + struct scatterlist *sglist, int repeat, + unsigned int max_segs, unsigned int max_seg_sz, + unsigned int *sg_len, int min_sg_len) +{ + struct scatterlist *sg = NULL; + unsigned int i; + unsigned long sz = size; + + sg_init_table(sglist, max_segs); + if (min_sg_len > max_segs) + min_sg_len = max_segs; + + *sg_len = 0; + do { + for (i = 0; i < mem->cnt; i++) { + unsigned long len = PAGE_SIZE << mem->arr[i].order; + + if (min_sg_len && (size / min_sg_len < len)) + len = ALIGN(size / min_sg_len, 512); + if (len > sz) + len = sz; + if (len > max_seg_sz) + len = max_seg_sz; + if (sg) + sg = sg_next(sg); + else + sg = sglist; + if (!sg) + return -EINVAL; + sg_set_page(sg, mem->arr[i].page, len, 0); + sz -= len; + *sg_len += 1; + if (!sz) + break; + } + } while (sz && repeat); + + if (sz) + return -EINVAL; + + if (sg) + sg_mark_end(sg); + + return 0; +} + +/* + * Map memory into a scatterlist so that no pages are contiguous. Allow the + * same memory to be mapped more than once. + */ +static int mmc_test_map_sg_max_scatter(struct mmc_test_mem *mem, + unsigned long sz, + struct scatterlist *sglist, + unsigned int max_segs, + unsigned int max_seg_sz, + unsigned int *sg_len) +{ + struct scatterlist *sg = NULL; + unsigned int i = mem->cnt, cnt; + unsigned long len; + void *base, *addr, *last_addr = NULL; + + sg_init_table(sglist, max_segs); + + *sg_len = 0; + while (sz) { + base = page_address(mem->arr[--i].page); + cnt = 1 << mem->arr[i].order; + while (sz && cnt) { + addr = base + PAGE_SIZE * --cnt; + if (last_addr && last_addr + PAGE_SIZE == addr) + continue; + last_addr = addr; + len = PAGE_SIZE; + if (len > max_seg_sz) + len = max_seg_sz; + if (len > sz) + len = sz; + if (sg) + sg = sg_next(sg); + else + sg = sglist; + if (!sg) + return -EINVAL; + sg_set_page(sg, virt_to_page(addr), len, 0); + sz -= len; + *sg_len += 1; + } + if (i == 0) + i = mem->cnt; + } + + if (sg) + sg_mark_end(sg); + + return 0; +} + +/* + * Calculate transfer rate in bytes per second. + */ +static unsigned int mmc_test_rate(uint64_t bytes, struct timespec64 *ts) +{ + uint64_t ns; + + ns = timespec64_to_ns(ts); + bytes *= 1000000000; + + while (ns > UINT_MAX) { + bytes >>= 1; + ns >>= 1; + } + + if (!ns) + return 0; + + do_div(bytes, (uint32_t)ns); + + return bytes; +} + +/* + * Save transfer results for future usage + */ +static void mmc_test_save_transfer_result(struct mmc_test_card *test, + unsigned int count, unsigned int sectors, struct timespec64 ts, + unsigned int rate, unsigned int iops) +{ + struct mmc_test_transfer_result *tr; + + if (!test->gr) + return; + + tr = kmalloc(sizeof(*tr), GFP_KERNEL); + if (!tr) + return; + + tr->count = count; + tr->sectors = sectors; + tr->ts = ts; + tr->rate = rate; + tr->iops = iops; + + list_add_tail(&tr->link, &test->gr->tr_lst); +} + +/* + * Print the transfer rate. + */ +static void mmc_test_print_rate(struct mmc_test_card *test, uint64_t bytes, + struct timespec64 *ts1, struct timespec64 *ts2) +{ + unsigned int rate, iops, sectors = bytes >> 9; + struct timespec64 ts; + + ts = timespec64_sub(*ts2, *ts1); + + rate = mmc_test_rate(bytes, &ts); + iops = mmc_test_rate(100, &ts); /* I/O ops per sec x 100 */ + + pr_info("%s: Transfer of %u sectors (%u%s KiB) took %llu.%09u " + "seconds (%u kB/s, %u KiB/s, %u.%02u IOPS)\n", + mmc_hostname(test->card->host), sectors, sectors >> 1, + (sectors & 1 ? ".5" : ""), (u64)ts.tv_sec, + (u32)ts.tv_nsec, rate / 1000, rate / 1024, + iops / 100, iops % 100); + + mmc_test_save_transfer_result(test, 1, sectors, ts, rate, iops); +} + +/* + * Print the average transfer rate. + */ +static void mmc_test_print_avg_rate(struct mmc_test_card *test, uint64_t bytes, + unsigned int count, struct timespec64 *ts1, + struct timespec64 *ts2) +{ + unsigned int rate, iops, sectors = bytes >> 9; + uint64_t tot = bytes * count; + struct timespec64 ts; + + ts = timespec64_sub(*ts2, *ts1); + + rate = mmc_test_rate(tot, &ts); + iops = mmc_test_rate(count * 100, &ts); /* I/O ops per sec x 100 */ + + pr_info("%s: Transfer of %u x %u sectors (%u x %u%s KiB) took " + "%llu.%09u seconds (%u kB/s, %u KiB/s, " + "%u.%02u IOPS, sg_len %d)\n", + mmc_hostname(test->card->host), count, sectors, count, + sectors >> 1, (sectors & 1 ? ".5" : ""), + (u64)ts.tv_sec, (u32)ts.tv_nsec, + rate / 1000, rate / 1024, iops / 100, iops % 100, + test->area.sg_len); + + mmc_test_save_transfer_result(test, count, sectors, ts, rate, iops); +} + +/* + * Return the card size in sectors. + */ +static unsigned int mmc_test_capacity(struct mmc_card *card) +{ + if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) + return card->ext_csd.sectors; + else + return card->csd.capacity << (card->csd.read_blkbits - 9); +} + +/*******************************************************************/ +/* Test preparation and cleanup */ +/*******************************************************************/ + +/* + * Fill the first couple of sectors of the card with known data + * so that bad reads/writes can be detected + */ +static int __mmc_test_prepare(struct mmc_test_card *test, int write) +{ + int ret, i; + + ret = mmc_test_set_blksize(test, 512); + if (ret) + return ret; + + if (write) + memset(test->buffer, 0xDF, 512); + else { + for (i = 0; i < 512; i++) + test->buffer[i] = i; + } + + for (i = 0; i < BUFFER_SIZE / 512; i++) { + ret = mmc_test_buffer_transfer(test, test->buffer, i, 512, 1); + if (ret) + return ret; + } + + return 0; +} + +static int mmc_test_prepare_write(struct mmc_test_card *test) +{ + return __mmc_test_prepare(test, 1); +} + +static int mmc_test_prepare_read(struct mmc_test_card *test) +{ + return __mmc_test_prepare(test, 0); +} + +static int mmc_test_cleanup(struct mmc_test_card *test) +{ + int ret, i; + + ret = mmc_test_set_blksize(test, 512); + if (ret) + return ret; + + memset(test->buffer, 0, 512); + + for (i = 0; i < BUFFER_SIZE / 512; i++) { + ret = mmc_test_buffer_transfer(test, test->buffer, i, 512, 1); + if (ret) + return ret; + } + + return 0; +} + +/*******************************************************************/ +/* Test execution helpers */ +/*******************************************************************/ + +/* + * Modifies the mmc_request to perform the "short transfer" tests + */ +static void mmc_test_prepare_broken_mrq(struct mmc_test_card *test, + struct mmc_request *mrq, int write) +{ + if (WARN_ON(!mrq || !mrq->cmd || !mrq->data)) + return; + + if (mrq->data->blocks > 1) { + mrq->cmd->opcode = write ? + MMC_WRITE_BLOCK : MMC_READ_SINGLE_BLOCK; + mrq->stop = NULL; + } else { + mrq->cmd->opcode = MMC_SEND_STATUS; + mrq->cmd->arg = test->card->rca << 16; + } +} + +/* + * Checks that a normal transfer didn't have any errors + */ +static int mmc_test_check_result(struct mmc_test_card *test, + struct mmc_request *mrq) +{ + int ret; + + if (WARN_ON(!mrq || !mrq->cmd || !mrq->data)) + return -EINVAL; + + ret = 0; + + if (mrq->sbc && mrq->sbc->error) + ret = mrq->sbc->error; + if (!ret && mrq->cmd->error) + ret = mrq->cmd->error; + if (!ret && mrq->data->error) + ret = mrq->data->error; + if (!ret && mrq->stop && mrq->stop->error) + ret = mrq->stop->error; + if (!ret && mrq->data->bytes_xfered != + mrq->data->blocks * mrq->data->blksz) + ret = RESULT_FAIL; + + if (ret == -EINVAL) + ret = RESULT_UNSUP_HOST; + + return ret; +} + +/* + * Checks that a "short transfer" behaved as expected + */ +static int mmc_test_check_broken_result(struct mmc_test_card *test, + struct mmc_request *mrq) +{ + int ret; + + if (WARN_ON(!mrq || !mrq->cmd || !mrq->data)) + return -EINVAL; + + ret = 0; + + if (!ret && mrq->cmd->error) + ret = mrq->cmd->error; + if (!ret && mrq->data->error == 0) + ret = RESULT_FAIL; + if (!ret && mrq->data->error != -ETIMEDOUT) + ret = mrq->data->error; + if (!ret && mrq->stop && mrq->stop->error) + ret = mrq->stop->error; + if (mrq->data->blocks > 1) { + if (!ret && mrq->data->bytes_xfered > mrq->data->blksz) + ret = RESULT_FAIL; + } else { + if (!ret && mrq->data->bytes_xfered > 0) + ret = RESULT_FAIL; + } + + if (ret == -EINVAL) + ret = RESULT_UNSUP_HOST; + + return ret; +} + +struct mmc_test_req { + struct mmc_request mrq; + struct mmc_command sbc; + struct mmc_command cmd; + struct mmc_command stop; + struct mmc_command status; + struct mmc_data data; +}; + +/* + * Tests nonblock transfer with certain parameters + */ +static void mmc_test_req_reset(struct mmc_test_req *rq) +{ + memset(rq, 0, sizeof(struct mmc_test_req)); + + rq->mrq.cmd = &rq->cmd; + rq->mrq.data = &rq->data; + rq->mrq.stop = &rq->stop; +} + +static struct mmc_test_req *mmc_test_req_alloc(void) +{ + struct mmc_test_req *rq = kmalloc(sizeof(*rq), GFP_KERNEL); + + if (rq) + mmc_test_req_reset(rq); + + return rq; +} + +static void mmc_test_wait_done(struct mmc_request *mrq) +{ + complete(&mrq->completion); +} + +static int mmc_test_start_areq(struct mmc_test_card *test, + struct mmc_request *mrq, + struct mmc_request *prev_mrq) +{ + struct mmc_host *host = test->card->host; + int err = 0; + + if (mrq) { + init_completion(&mrq->completion); + mrq->done = mmc_test_wait_done; + mmc_pre_req(host, mrq); + } + + if (prev_mrq) { + wait_for_completion(&prev_mrq->completion); + err = mmc_test_wait_busy(test); + if (!err) + err = mmc_test_check_result(test, prev_mrq); + } + + if (!err && mrq) { + err = mmc_start_request(host, mrq); + if (err) + mmc_retune_release(host); + } + + if (prev_mrq) + mmc_post_req(host, prev_mrq, 0); + + if (err && mrq) + mmc_post_req(host, mrq, err); + + return err; +} + +static int mmc_test_nonblock_transfer(struct mmc_test_card *test, + unsigned int dev_addr, int write, + int count) +{ + struct mmc_test_req *rq1, *rq2; + struct mmc_request *mrq, *prev_mrq; + int i; + int ret = RESULT_OK; + struct mmc_test_area *t = &test->area; + struct scatterlist *sg = t->sg; + struct scatterlist *sg_areq = t->sg_areq; + + rq1 = mmc_test_req_alloc(); + rq2 = mmc_test_req_alloc(); + if (!rq1 || !rq2) { + ret = RESULT_FAIL; + goto err; + } + + mrq = &rq1->mrq; + prev_mrq = NULL; + + for (i = 0; i < count; i++) { + mmc_test_req_reset(container_of(mrq, struct mmc_test_req, mrq)); + mmc_test_prepare_mrq(test, mrq, sg, t->sg_len, dev_addr, + t->blocks, 512, write); + ret = mmc_test_start_areq(test, mrq, prev_mrq); + if (ret) + goto err; + + if (!prev_mrq) + prev_mrq = &rq2->mrq; + + swap(mrq, prev_mrq); + swap(sg, sg_areq); + dev_addr += t->blocks; + } + + ret = mmc_test_start_areq(test, NULL, prev_mrq); +err: + kfree(rq1); + kfree(rq2); + return ret; +} + +/* + * Tests a basic transfer with certain parameters + */ +static int mmc_test_simple_transfer(struct mmc_test_card *test, + struct scatterlist *sg, unsigned sg_len, unsigned dev_addr, + unsigned blocks, unsigned blksz, int write) +{ + struct mmc_request mrq = {}; + struct mmc_command cmd = {}; + struct mmc_command stop = {}; + struct mmc_data data = {}; + + mrq.cmd = &cmd; + mrq.data = &data; + mrq.stop = &stop; + + mmc_test_prepare_mrq(test, &mrq, sg, sg_len, dev_addr, + blocks, blksz, write); + + mmc_wait_for_req(test->card->host, &mrq); + + mmc_test_wait_busy(test); + + return mmc_test_check_result(test, &mrq); +} + +/* + * Tests a transfer where the card will fail completely or partly + */ +static int mmc_test_broken_transfer(struct mmc_test_card *test, + unsigned blocks, unsigned blksz, int write) +{ + struct mmc_request mrq = {}; + struct mmc_command cmd = {}; + struct mmc_command stop = {}; + struct mmc_data data = {}; + + struct scatterlist sg; + + mrq.cmd = &cmd; + mrq.data = &data; + mrq.stop = &stop; + + sg_init_one(&sg, test->buffer, blocks * blksz); + + mmc_test_prepare_mrq(test, &mrq, &sg, 1, 0, blocks, blksz, write); + mmc_test_prepare_broken_mrq(test, &mrq, write); + + mmc_wait_for_req(test->card->host, &mrq); + + mmc_test_wait_busy(test); + + return mmc_test_check_broken_result(test, &mrq); +} + +/* + * Does a complete transfer test where data is also validated + * + * Note: mmc_test_prepare() must have been done before this call + */ +static int mmc_test_transfer(struct mmc_test_card *test, + struct scatterlist *sg, unsigned sg_len, unsigned dev_addr, + unsigned blocks, unsigned blksz, int write) +{ + int ret, i; + unsigned long flags; + + if (write) { + for (i = 0; i < blocks * blksz; i++) + test->scratch[i] = i; + } else { + memset(test->scratch, 0, BUFFER_SIZE); + } + local_irq_save(flags); + sg_copy_from_buffer(sg, sg_len, test->scratch, BUFFER_SIZE); + local_irq_restore(flags); + + ret = mmc_test_set_blksize(test, blksz); + if (ret) + return ret; + + ret = mmc_test_simple_transfer(test, sg, sg_len, dev_addr, + blocks, blksz, write); + if (ret) + return ret; + + if (write) { + int sectors; + + ret = mmc_test_set_blksize(test, 512); + if (ret) + return ret; + + sectors = (blocks * blksz + 511) / 512; + if ((sectors * 512) == (blocks * blksz)) + sectors++; + + if ((sectors * 512) > BUFFER_SIZE) + return -EINVAL; + + memset(test->buffer, 0, sectors * 512); + + for (i = 0; i < sectors; i++) { + ret = mmc_test_buffer_transfer(test, + test->buffer + i * 512, + dev_addr + i, 512, 0); + if (ret) + return ret; + } + + for (i = 0; i < blocks * blksz; i++) { + if (test->buffer[i] != (u8)i) + return RESULT_FAIL; + } + + for (; i < sectors * 512; i++) { + if (test->buffer[i] != 0xDF) + return RESULT_FAIL; + } + } else { + local_irq_save(flags); + sg_copy_to_buffer(sg, sg_len, test->scratch, BUFFER_SIZE); + local_irq_restore(flags); + for (i = 0; i < blocks * blksz; i++) { + if (test->scratch[i] != (u8)i) + return RESULT_FAIL; + } + } + + return 0; +} + +/*******************************************************************/ +/* Tests */ +/*******************************************************************/ + +struct mmc_test_case { + const char *name; + + int (*prepare)(struct mmc_test_card *); + int (*run)(struct mmc_test_card *); + int (*cleanup)(struct mmc_test_card *); +}; + +static int mmc_test_basic_write(struct mmc_test_card *test) +{ + int ret; + struct scatterlist sg; + + ret = mmc_test_set_blksize(test, 512); + if (ret) + return ret; + + sg_init_one(&sg, test->buffer, 512); + + return mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 1); +} + +static int mmc_test_basic_read(struct mmc_test_card *test) +{ + int ret; + struct scatterlist sg; + + ret = mmc_test_set_blksize(test, 512); + if (ret) + return ret; + + sg_init_one(&sg, test->buffer, 512); + + return mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 0); +} + +static int mmc_test_verify_write(struct mmc_test_card *test) +{ + struct scatterlist sg; + + sg_init_one(&sg, test->buffer, 512); + + return mmc_test_transfer(test, &sg, 1, 0, 1, 512, 1); +} + +static int mmc_test_verify_read(struct mmc_test_card *test) +{ + struct scatterlist sg; + + sg_init_one(&sg, test->buffer, 512); + + return mmc_test_transfer(test, &sg, 1, 0, 1, 512, 0); +} + +static int mmc_test_multi_write(struct mmc_test_card *test) +{ + unsigned int size; + struct scatterlist sg; + + if (test->card->host->max_blk_count == 1) + return RESULT_UNSUP_HOST; + + size = PAGE_SIZE * 2; + size = min(size, test->card->host->max_req_size); + size = min(size, test->card->host->max_seg_size); + size = min(size, test->card->host->max_blk_count * 512); + + if (size < 1024) + return RESULT_UNSUP_HOST; + + sg_init_one(&sg, test->buffer, size); + + return mmc_test_transfer(test, &sg, 1, 0, size / 512, 512, 1); +} + +static int mmc_test_multi_read(struct mmc_test_card *test) +{ + unsigned int size; + struct scatterlist sg; + + if (test->card->host->max_blk_count == 1) + return RESULT_UNSUP_HOST; + + size = PAGE_SIZE * 2; + size = min(size, test->card->host->max_req_size); + size = min(size, test->card->host->max_seg_size); + size = min(size, test->card->host->max_blk_count * 512); + + if (size < 1024) + return RESULT_UNSUP_HOST; + + sg_init_one(&sg, test->buffer, size); + + return mmc_test_transfer(test, &sg, 1, 0, size / 512, 512, 0); +} + +static int mmc_test_pow2_write(struct mmc_test_card *test) +{ + int ret, i; + struct scatterlist sg; + + if (!test->card->csd.write_partial) + return RESULT_UNSUP_CARD; + + for (i = 1; i < 512; i <<= 1) { + sg_init_one(&sg, test->buffer, i); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, i, 1); + if (ret) + return ret; + } + + return 0; +} + +static int mmc_test_pow2_read(struct mmc_test_card *test) +{ + int ret, i; + struct scatterlist sg; + + if (!test->card->csd.read_partial) + return RESULT_UNSUP_CARD; + + for (i = 1; i < 512; i <<= 1) { + sg_init_one(&sg, test->buffer, i); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, i, 0); + if (ret) + return ret; + } + + return 0; +} + +static int mmc_test_weird_write(struct mmc_test_card *test) +{ + int ret, i; + struct scatterlist sg; + + if (!test->card->csd.write_partial) + return RESULT_UNSUP_CARD; + + for (i = 3; i < 512; i += 7) { + sg_init_one(&sg, test->buffer, i); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, i, 1); + if (ret) + return ret; + } + + return 0; +} + +static int mmc_test_weird_read(struct mmc_test_card *test) +{ + int ret, i; + struct scatterlist sg; + + if (!test->card->csd.read_partial) + return RESULT_UNSUP_CARD; + + for (i = 3; i < 512; i += 7) { + sg_init_one(&sg, test->buffer, i); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, i, 0); + if (ret) + return ret; + } + + return 0; +} + +static int mmc_test_align_write(struct mmc_test_card *test) +{ + int ret, i; + struct scatterlist sg; + + for (i = 1; i < TEST_ALIGN_END; i++) { + sg_init_one(&sg, test->buffer + i, 512); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 1); + if (ret) + return ret; + } + + return 0; +} + +static int mmc_test_align_read(struct mmc_test_card *test) +{ + int ret, i; + struct scatterlist sg; + + for (i = 1; i < TEST_ALIGN_END; i++) { + sg_init_one(&sg, test->buffer + i, 512); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 0); + if (ret) + return ret; + } + + return 0; +} + +static int mmc_test_align_multi_write(struct mmc_test_card *test) +{ + int ret, i; + unsigned int size; + struct scatterlist sg; + + if (test->card->host->max_blk_count == 1) + return RESULT_UNSUP_HOST; + + size = PAGE_SIZE * 2; + size = min(size, test->card->host->max_req_size); + size = min(size, test->card->host->max_seg_size); + size = min(size, test->card->host->max_blk_count * 512); + + if (size < 1024) + return RESULT_UNSUP_HOST; + + for (i = 1; i < TEST_ALIGN_END; i++) { + sg_init_one(&sg, test->buffer + i, size); + ret = mmc_test_transfer(test, &sg, 1, 0, size / 512, 512, 1); + if (ret) + return ret; + } + + return 0; +} + +static int mmc_test_align_multi_read(struct mmc_test_card *test) +{ + int ret, i; + unsigned int size; + struct scatterlist sg; + + if (test->card->host->max_blk_count == 1) + return RESULT_UNSUP_HOST; + + size = PAGE_SIZE * 2; + size = min(size, test->card->host->max_req_size); + size = min(size, test->card->host->max_seg_size); + size = min(size, test->card->host->max_blk_count * 512); + + if (size < 1024) + return RESULT_UNSUP_HOST; + + for (i = 1; i < TEST_ALIGN_END; i++) { + sg_init_one(&sg, test->buffer + i, size); + ret = mmc_test_transfer(test, &sg, 1, 0, size / 512, 512, 0); + if (ret) + return ret; + } + + return 0; +} + +static int mmc_test_xfersize_write(struct mmc_test_card *test) +{ + int ret; + + ret = mmc_test_set_blksize(test, 512); + if (ret) + return ret; + + return mmc_test_broken_transfer(test, 1, 512, 1); +} + +static int mmc_test_xfersize_read(struct mmc_test_card *test) +{ + int ret; + + ret = mmc_test_set_blksize(test, 512); + if (ret) + return ret; + + return mmc_test_broken_transfer(test, 1, 512, 0); +} + +static int mmc_test_multi_xfersize_write(struct mmc_test_card *test) +{ + int ret; + + if (test->card->host->max_blk_count == 1) + return RESULT_UNSUP_HOST; + + ret = mmc_test_set_blksize(test, 512); + if (ret) + return ret; + + return mmc_test_broken_transfer(test, 2, 512, 1); +} + +static int mmc_test_multi_xfersize_read(struct mmc_test_card *test) +{ + int ret; + + if (test->card->host->max_blk_count == 1) + return RESULT_UNSUP_HOST; + + ret = mmc_test_set_blksize(test, 512); + if (ret) + return ret; + + return mmc_test_broken_transfer(test, 2, 512, 0); +} + +#ifdef CONFIG_HIGHMEM + +static int mmc_test_write_high(struct mmc_test_card *test) +{ + struct scatterlist sg; + + sg_init_table(&sg, 1); + sg_set_page(&sg, test->highmem, 512, 0); + + return mmc_test_transfer(test, &sg, 1, 0, 1, 512, 1); +} + +static int mmc_test_read_high(struct mmc_test_card *test) +{ + struct scatterlist sg; + + sg_init_table(&sg, 1); + sg_set_page(&sg, test->highmem, 512, 0); + + return mmc_test_transfer(test, &sg, 1, 0, 1, 512, 0); +} + +static int mmc_test_multi_write_high(struct mmc_test_card *test) +{ + unsigned int size; + struct scatterlist sg; + + if (test->card->host->max_blk_count == 1) + return RESULT_UNSUP_HOST; + + size = PAGE_SIZE * 2; + size = min(size, test->card->host->max_req_size); + size = min(size, test->card->host->max_seg_size); + size = min(size, test->card->host->max_blk_count * 512); + + if (size < 1024) + return RESULT_UNSUP_HOST; + + sg_init_table(&sg, 1); + sg_set_page(&sg, test->highmem, size, 0); + + return mmc_test_transfer(test, &sg, 1, 0, size / 512, 512, 1); +} + +static int mmc_test_multi_read_high(struct mmc_test_card *test) +{ + unsigned int size; + struct scatterlist sg; + + if (test->card->host->max_blk_count == 1) + return RESULT_UNSUP_HOST; + + size = PAGE_SIZE * 2; + size = min(size, test->card->host->max_req_size); + size = min(size, test->card->host->max_seg_size); + size = min(size, test->card->host->max_blk_count * 512); + + if (size < 1024) + return RESULT_UNSUP_HOST; + + sg_init_table(&sg, 1); + sg_set_page(&sg, test->highmem, size, 0); + + return mmc_test_transfer(test, &sg, 1, 0, size / 512, 512, 0); +} + +#else + +static int mmc_test_no_highmem(struct mmc_test_card *test) +{ + pr_info("%s: Highmem not configured - test skipped\n", + mmc_hostname(test->card->host)); + return 0; +} + +#endif /* CONFIG_HIGHMEM */ + +/* + * Map sz bytes so that it can be transferred. + */ +static int mmc_test_area_map(struct mmc_test_card *test, unsigned long sz, + int max_scatter, int min_sg_len, bool nonblock) +{ + struct mmc_test_area *t = &test->area; + int err; + unsigned int sg_len = 0; + + t->blocks = sz >> 9; + + if (max_scatter) { + err = mmc_test_map_sg_max_scatter(t->mem, sz, t->sg, + t->max_segs, t->max_seg_sz, + &t->sg_len); + } else { + err = mmc_test_map_sg(t->mem, sz, t->sg, 1, t->max_segs, + t->max_seg_sz, &t->sg_len, min_sg_len); + } + + if (err || !nonblock) + goto err; + + if (max_scatter) { + err = mmc_test_map_sg_max_scatter(t->mem, sz, t->sg_areq, + t->max_segs, t->max_seg_sz, + &sg_len); + } else { + err = mmc_test_map_sg(t->mem, sz, t->sg_areq, 1, t->max_segs, + t->max_seg_sz, &sg_len, min_sg_len); + } + if (!err && sg_len != t->sg_len) + err = -EINVAL; + +err: + if (err) + pr_info("%s: Failed to map sg list\n", + mmc_hostname(test->card->host)); + return err; +} + +/* + * Transfer bytes mapped by mmc_test_area_map(). + */ +static int mmc_test_area_transfer(struct mmc_test_card *test, + unsigned int dev_addr, int write) +{ + struct mmc_test_area *t = &test->area; + + return mmc_test_simple_transfer(test, t->sg, t->sg_len, dev_addr, + t->blocks, 512, write); +} + +/* + * Map and transfer bytes for multiple transfers. + */ +static int mmc_test_area_io_seq(struct mmc_test_card *test, unsigned long sz, + unsigned int dev_addr, int write, + int max_scatter, int timed, int count, + bool nonblock, int min_sg_len) +{ + struct timespec64 ts1, ts2; + int ret = 0; + int i; + + /* + * In the case of a maximally scattered transfer, the maximum transfer + * size is further limited by using PAGE_SIZE segments. + */ + if (max_scatter) { + struct mmc_test_area *t = &test->area; + unsigned long max_tfr; + + if (t->max_seg_sz >= PAGE_SIZE) + max_tfr = t->max_segs * PAGE_SIZE; + else + max_tfr = t->max_segs * t->max_seg_sz; + if (sz > max_tfr) + sz = max_tfr; + } + + ret = mmc_test_area_map(test, sz, max_scatter, min_sg_len, nonblock); + if (ret) + return ret; + + if (timed) + ktime_get_ts64(&ts1); + if (nonblock) + ret = mmc_test_nonblock_transfer(test, dev_addr, write, count); + else + for (i = 0; i < count && ret == 0; i++) { + ret = mmc_test_area_transfer(test, dev_addr, write); + dev_addr += sz >> 9; + } + + if (ret) + return ret; + + if (timed) + ktime_get_ts64(&ts2); + + if (timed) + mmc_test_print_avg_rate(test, sz, count, &ts1, &ts2); + + return 0; +} + +static int mmc_test_area_io(struct mmc_test_card *test, unsigned long sz, + unsigned int dev_addr, int write, int max_scatter, + int timed) +{ + return mmc_test_area_io_seq(test, sz, dev_addr, write, max_scatter, + timed, 1, false, 0); +} + +/* + * Write the test area entirely. + */ +static int mmc_test_area_fill(struct mmc_test_card *test) +{ + struct mmc_test_area *t = &test->area; + + return mmc_test_area_io(test, t->max_tfr, t->dev_addr, 1, 0, 0); +} + +/* + * Erase the test area entirely. + */ +static int mmc_test_area_erase(struct mmc_test_card *test) +{ + struct mmc_test_area *t = &test->area; + + if (!mmc_can_erase(test->card)) + return 0; + + return mmc_erase(test->card, t->dev_addr, t->max_sz >> 9, + MMC_ERASE_ARG); +} + +/* + * Cleanup struct mmc_test_area. + */ +static int mmc_test_area_cleanup(struct mmc_test_card *test) +{ + struct mmc_test_area *t = &test->area; + + kfree(t->sg); + kfree(t->sg_areq); + mmc_test_free_mem(t->mem); + + return 0; +} + +/* + * Initialize an area for testing large transfers. The test area is set to the + * middle of the card because cards may have different characteristics at the + * front (for FAT file system optimization). Optionally, the area is erased + * (if the card supports it) which may improve write performance. Optionally, + * the area is filled with data for subsequent read tests. + */ +static int mmc_test_area_init(struct mmc_test_card *test, int erase, int fill) +{ + struct mmc_test_area *t = &test->area; + unsigned long min_sz = 64 * 1024, sz; + int ret; + + ret = mmc_test_set_blksize(test, 512); + if (ret) + return ret; + + /* Make the test area size about 4MiB */ + sz = (unsigned long)test->card->pref_erase << 9; + t->max_sz = sz; + while (t->max_sz < 4 * 1024 * 1024) + t->max_sz += sz; + while (t->max_sz > TEST_AREA_MAX_SIZE && t->max_sz > sz) + t->max_sz -= sz; + + t->max_segs = test->card->host->max_segs; + t->max_seg_sz = test->card->host->max_seg_size; + t->max_seg_sz -= t->max_seg_sz % 512; + + t->max_tfr = t->max_sz; + if (t->max_tfr >> 9 > test->card->host->max_blk_count) + t->max_tfr = test->card->host->max_blk_count << 9; + if (t->max_tfr > test->card->host->max_req_size) + t->max_tfr = test->card->host->max_req_size; + if (t->max_tfr / t->max_seg_sz > t->max_segs) + t->max_tfr = t->max_segs * t->max_seg_sz; + + /* + * Try to allocate enough memory for a max. sized transfer. Less is OK + * because the same memory can be mapped into the scatterlist more than + * once. Also, take into account the limits imposed on scatterlist + * segments by the host driver. + */ + t->mem = mmc_test_alloc_mem(min_sz, t->max_tfr, t->max_segs, + t->max_seg_sz); + if (!t->mem) + return -ENOMEM; + + t->sg = kmalloc_array(t->max_segs, sizeof(*t->sg), GFP_KERNEL); + if (!t->sg) { + ret = -ENOMEM; + goto out_free; + } + + t->sg_areq = kmalloc_array(t->max_segs, sizeof(*t->sg_areq), + GFP_KERNEL); + if (!t->sg_areq) { + ret = -ENOMEM; + goto out_free; + } + + t->dev_addr = mmc_test_capacity(test->card) / 2; + t->dev_addr -= t->dev_addr % (t->max_sz >> 9); + + if (erase) { + ret = mmc_test_area_erase(test); + if (ret) + goto out_free; + } + + if (fill) { + ret = mmc_test_area_fill(test); + if (ret) + goto out_free; + } + + return 0; + +out_free: + mmc_test_area_cleanup(test); + return ret; +} + +/* + * Prepare for large transfers. Do not erase the test area. + */ +static int mmc_test_area_prepare(struct mmc_test_card *test) +{ + return mmc_test_area_init(test, 0, 0); +} + +/* + * Prepare for large transfers. Do erase the test area. + */ +static int mmc_test_area_prepare_erase(struct mmc_test_card *test) +{ + return mmc_test_area_init(test, 1, 0); +} + +/* + * Prepare for large transfers. Erase and fill the test area. + */ +static int mmc_test_area_prepare_fill(struct mmc_test_card *test) +{ + return mmc_test_area_init(test, 1, 1); +} + +/* + * Test best-case performance. Best-case performance is expected from + * a single large transfer. + * + * An additional option (max_scatter) allows the measurement of the same + * transfer but with no contiguous pages in the scatter list. This tests + * the efficiency of DMA to handle scattered pages. + */ +static int mmc_test_best_performance(struct mmc_test_card *test, int write, + int max_scatter) +{ + struct mmc_test_area *t = &test->area; + + return mmc_test_area_io(test, t->max_tfr, t->dev_addr, write, + max_scatter, 1); +} + +/* + * Best-case read performance. + */ +static int mmc_test_best_read_performance(struct mmc_test_card *test) +{ + return mmc_test_best_performance(test, 0, 0); +} + +/* + * Best-case write performance. + */ +static int mmc_test_best_write_performance(struct mmc_test_card *test) +{ + return mmc_test_best_performance(test, 1, 0); +} + +/* + * Best-case read performance into scattered pages. + */ +static int mmc_test_best_read_perf_max_scatter(struct mmc_test_card *test) +{ + return mmc_test_best_performance(test, 0, 1); +} + +/* + * Best-case write performance from scattered pages. + */ +static int mmc_test_best_write_perf_max_scatter(struct mmc_test_card *test) +{ + return mmc_test_best_performance(test, 1, 1); +} + +/* + * Single read performance by transfer size. + */ +static int mmc_test_profile_read_perf(struct mmc_test_card *test) +{ + struct mmc_test_area *t = &test->area; + unsigned long sz; + unsigned int dev_addr; + int ret; + + for (sz = 512; sz < t->max_tfr; sz <<= 1) { + dev_addr = t->dev_addr + (sz >> 9); + ret = mmc_test_area_io(test, sz, dev_addr, 0, 0, 1); + if (ret) + return ret; + } + sz = t->max_tfr; + dev_addr = t->dev_addr; + return mmc_test_area_io(test, sz, dev_addr, 0, 0, 1); +} + +/* + * Single write performance by transfer size. + */ +static int mmc_test_profile_write_perf(struct mmc_test_card *test) +{ + struct mmc_test_area *t = &test->area; + unsigned long sz; + unsigned int dev_addr; + int ret; + + ret = mmc_test_area_erase(test); + if (ret) + return ret; + for (sz = 512; sz < t->max_tfr; sz <<= 1) { + dev_addr = t->dev_addr + (sz >> 9); + ret = mmc_test_area_io(test, sz, dev_addr, 1, 0, 1); + if (ret) + return ret; + } + ret = mmc_test_area_erase(test); + if (ret) + return ret; + sz = t->max_tfr; + dev_addr = t->dev_addr; + return mmc_test_area_io(test, sz, dev_addr, 1, 0, 1); +} + +/* + * Single trim performance by transfer size. + */ +static int mmc_test_profile_trim_perf(struct mmc_test_card *test) +{ + struct mmc_test_area *t = &test->area; + unsigned long sz; + unsigned int dev_addr; + struct timespec64 ts1, ts2; + int ret; + + if (!mmc_can_trim(test->card)) + return RESULT_UNSUP_CARD; + + if (!mmc_can_erase(test->card)) + return RESULT_UNSUP_HOST; + + for (sz = 512; sz < t->max_sz; sz <<= 1) { + dev_addr = t->dev_addr + (sz >> 9); + ktime_get_ts64(&ts1); + ret = mmc_erase(test->card, dev_addr, sz >> 9, MMC_TRIM_ARG); + if (ret) + return ret; + ktime_get_ts64(&ts2); + mmc_test_print_rate(test, sz, &ts1, &ts2); + } + dev_addr = t->dev_addr; + ktime_get_ts64(&ts1); + ret = mmc_erase(test->card, dev_addr, sz >> 9, MMC_TRIM_ARG); + if (ret) + return ret; + ktime_get_ts64(&ts2); + mmc_test_print_rate(test, sz, &ts1, &ts2); + return 0; +} + +static int mmc_test_seq_read_perf(struct mmc_test_card *test, unsigned long sz) +{ + struct mmc_test_area *t = &test->area; + unsigned int dev_addr, i, cnt; + struct timespec64 ts1, ts2; + int ret; + + cnt = t->max_sz / sz; + dev_addr = t->dev_addr; + ktime_get_ts64(&ts1); + for (i = 0; i < cnt; i++) { + ret = mmc_test_area_io(test, sz, dev_addr, 0, 0, 0); + if (ret) + return ret; + dev_addr += (sz >> 9); + } + ktime_get_ts64(&ts2); + mmc_test_print_avg_rate(test, sz, cnt, &ts1, &ts2); + return 0; +} + +/* + * Consecutive read performance by transfer size. + */ +static int mmc_test_profile_seq_read_perf(struct mmc_test_card *test) +{ + struct mmc_test_area *t = &test->area; + unsigned long sz; + int ret; + + for (sz = 512; sz < t->max_tfr; sz <<= 1) { + ret = mmc_test_seq_read_perf(test, sz); + if (ret) + return ret; + } + sz = t->max_tfr; + return mmc_test_seq_read_perf(test, sz); +} + +static int mmc_test_seq_write_perf(struct mmc_test_card *test, unsigned long sz) +{ + struct mmc_test_area *t = &test->area; + unsigned int dev_addr, i, cnt; + struct timespec64 ts1, ts2; + int ret; + + ret = mmc_test_area_erase(test); + if (ret) + return ret; + cnt = t->max_sz / sz; + dev_addr = t->dev_addr; + ktime_get_ts64(&ts1); + for (i = 0; i < cnt; i++) { + ret = mmc_test_area_io(test, sz, dev_addr, 1, 0, 0); + if (ret) + return ret; + dev_addr += (sz >> 9); + } + ktime_get_ts64(&ts2); + mmc_test_print_avg_rate(test, sz, cnt, &ts1, &ts2); + return 0; +} + +/* + * Consecutive write performance by transfer size. + */ +static int mmc_test_profile_seq_write_perf(struct mmc_test_card *test) +{ + struct mmc_test_area *t = &test->area; + unsigned long sz; + int ret; + + for (sz = 512; sz < t->max_tfr; sz <<= 1) { + ret = mmc_test_seq_write_perf(test, sz); + if (ret) + return ret; + } + sz = t->max_tfr; + return mmc_test_seq_write_perf(test, sz); +} + +/* + * Consecutive trim performance by transfer size. + */ +static int mmc_test_profile_seq_trim_perf(struct mmc_test_card *test) +{ + struct mmc_test_area *t = &test->area; + unsigned long sz; + unsigned int dev_addr, i, cnt; + struct timespec64 ts1, ts2; + int ret; + + if (!mmc_can_trim(test->card)) + return RESULT_UNSUP_CARD; + + if (!mmc_can_erase(test->card)) + return RESULT_UNSUP_HOST; + + for (sz = 512; sz <= t->max_sz; sz <<= 1) { + ret = mmc_test_area_erase(test); + if (ret) + return ret; + ret = mmc_test_area_fill(test); + if (ret) + return ret; + cnt = t->max_sz / sz; + dev_addr = t->dev_addr; + ktime_get_ts64(&ts1); + for (i = 0; i < cnt; i++) { + ret = mmc_erase(test->card, dev_addr, sz >> 9, + MMC_TRIM_ARG); + if (ret) + return ret; + dev_addr += (sz >> 9); + } + ktime_get_ts64(&ts2); + mmc_test_print_avg_rate(test, sz, cnt, &ts1, &ts2); + } + return 0; +} + +static unsigned int rnd_next = 1; + +static unsigned int mmc_test_rnd_num(unsigned int rnd_cnt) +{ + uint64_t r; + + rnd_next = rnd_next * 1103515245 + 12345; + r = (rnd_next >> 16) & 0x7fff; + return (r * rnd_cnt) >> 15; +} + +static int mmc_test_rnd_perf(struct mmc_test_card *test, int write, int print, + unsigned long sz) +{ + unsigned int dev_addr, cnt, rnd_addr, range1, range2, last_ea = 0, ea; + unsigned int ssz; + struct timespec64 ts1, ts2, ts; + int ret; + + ssz = sz >> 9; + + rnd_addr = mmc_test_capacity(test->card) / 4; + range1 = rnd_addr / test->card->pref_erase; + range2 = range1 / ssz; + + ktime_get_ts64(&ts1); + for (cnt = 0; cnt < UINT_MAX; cnt++) { + ktime_get_ts64(&ts2); + ts = timespec64_sub(ts2, ts1); + if (ts.tv_sec >= 10) + break; + ea = mmc_test_rnd_num(range1); + if (ea == last_ea) + ea -= 1; + last_ea = ea; + dev_addr = rnd_addr + test->card->pref_erase * ea + + ssz * mmc_test_rnd_num(range2); + ret = mmc_test_area_io(test, sz, dev_addr, write, 0, 0); + if (ret) + return ret; + } + if (print) + mmc_test_print_avg_rate(test, sz, cnt, &ts1, &ts2); + return 0; +} + +static int mmc_test_random_perf(struct mmc_test_card *test, int write) +{ + struct mmc_test_area *t = &test->area; + unsigned int next; + unsigned long sz; + int ret; + + for (sz = 512; sz < t->max_tfr; sz <<= 1) { + /* + * When writing, try to get more consistent results by running + * the test twice with exactly the same I/O but outputting the + * results only for the 2nd run. + */ + if (write) { + next = rnd_next; + ret = mmc_test_rnd_perf(test, write, 0, sz); + if (ret) + return ret; + rnd_next = next; + } + ret = mmc_test_rnd_perf(test, write, 1, sz); + if (ret) + return ret; + } + sz = t->max_tfr; + if (write) { + next = rnd_next; + ret = mmc_test_rnd_perf(test, write, 0, sz); + if (ret) + return ret; + rnd_next = next; + } + return mmc_test_rnd_perf(test, write, 1, sz); +} + +/* + * Random read performance by transfer size. + */ +static int mmc_test_random_read_perf(struct mmc_test_card *test) +{ + return mmc_test_random_perf(test, 0); +} + +/* + * Random write performance by transfer size. + */ +static int mmc_test_random_write_perf(struct mmc_test_card *test) +{ + return mmc_test_random_perf(test, 1); +} + +static int mmc_test_seq_perf(struct mmc_test_card *test, int write, + unsigned int tot_sz, int max_scatter) +{ + struct mmc_test_area *t = &test->area; + unsigned int dev_addr, i, cnt, sz, ssz; + struct timespec64 ts1, ts2; + int ret; + + sz = t->max_tfr; + + /* + * In the case of a maximally scattered transfer, the maximum transfer + * size is further limited by using PAGE_SIZE segments. + */ + if (max_scatter) { + unsigned long max_tfr; + + if (t->max_seg_sz >= PAGE_SIZE) + max_tfr = t->max_segs * PAGE_SIZE; + else + max_tfr = t->max_segs * t->max_seg_sz; + if (sz > max_tfr) + sz = max_tfr; + } + + ssz = sz >> 9; + dev_addr = mmc_test_capacity(test->card) / 4; + if (tot_sz > dev_addr << 9) + tot_sz = dev_addr << 9; + cnt = tot_sz / sz; + dev_addr &= 0xffff0000; /* Round to 64MiB boundary */ + + ktime_get_ts64(&ts1); + for (i = 0; i < cnt; i++) { + ret = mmc_test_area_io(test, sz, dev_addr, write, + max_scatter, 0); + if (ret) + return ret; + dev_addr += ssz; + } + ktime_get_ts64(&ts2); + + mmc_test_print_avg_rate(test, sz, cnt, &ts1, &ts2); + + return 0; +} + +static int mmc_test_large_seq_perf(struct mmc_test_card *test, int write) +{ + int ret, i; + + for (i = 0; i < 10; i++) { + ret = mmc_test_seq_perf(test, write, 10 * 1024 * 1024, 1); + if (ret) + return ret; + } + for (i = 0; i < 5; i++) { + ret = mmc_test_seq_perf(test, write, 100 * 1024 * 1024, 1); + if (ret) + return ret; + } + for (i = 0; i < 3; i++) { + ret = mmc_test_seq_perf(test, write, 1000 * 1024 * 1024, 1); + if (ret) + return ret; + } + + return ret; +} + +/* + * Large sequential read performance. + */ +static int mmc_test_large_seq_read_perf(struct mmc_test_card *test) +{ + return mmc_test_large_seq_perf(test, 0); +} + +/* + * Large sequential write performance. + */ +static int mmc_test_large_seq_write_perf(struct mmc_test_card *test) +{ + return mmc_test_large_seq_perf(test, 1); +} + +static int mmc_test_rw_multiple(struct mmc_test_card *test, + struct mmc_test_multiple_rw *tdata, + unsigned int reqsize, unsigned int size, + int min_sg_len) +{ + unsigned int dev_addr; + struct mmc_test_area *t = &test->area; + int ret = 0; + + /* Set up test area */ + if (size > mmc_test_capacity(test->card) / 2 * 512) + size = mmc_test_capacity(test->card) / 2 * 512; + if (reqsize > t->max_tfr) + reqsize = t->max_tfr; + dev_addr = mmc_test_capacity(test->card) / 4; + if ((dev_addr & 0xffff0000)) + dev_addr &= 0xffff0000; /* Round to 64MiB boundary */ + else + dev_addr &= 0xfffff800; /* Round to 1MiB boundary */ + if (!dev_addr) + goto err; + + if (reqsize > size) + return 0; + + /* prepare test area */ + if (mmc_can_erase(test->card) && + tdata->prepare & MMC_TEST_PREP_ERASE) { + ret = mmc_erase(test->card, dev_addr, + size / 512, MMC_SECURE_ERASE_ARG); + if (ret) + ret = mmc_erase(test->card, dev_addr, + size / 512, MMC_ERASE_ARG); + if (ret) + goto err; + } + + /* Run test */ + ret = mmc_test_area_io_seq(test, reqsize, dev_addr, + tdata->do_write, 0, 1, size / reqsize, + tdata->do_nonblock_req, min_sg_len); + if (ret) + goto err; + + return ret; + err: + pr_info("[%s] error\n", __func__); + return ret; +} + +static int mmc_test_rw_multiple_size(struct mmc_test_card *test, + struct mmc_test_multiple_rw *rw) +{ + int ret = 0; + int i; + void *pre_req = test->card->host->ops->pre_req; + void *post_req = test->card->host->ops->post_req; + + if (rw->do_nonblock_req && + ((!pre_req && post_req) || (pre_req && !post_req))) { + pr_info("error: only one of pre/post is defined\n"); + return -EINVAL; + } + + for (i = 0 ; i < rw->len && ret == 0; i++) { + ret = mmc_test_rw_multiple(test, rw, rw->bs[i], rw->size, 0); + if (ret) + break; + } + return ret; +} + +static int mmc_test_rw_multiple_sg_len(struct mmc_test_card *test, + struct mmc_test_multiple_rw *rw) +{ + int ret = 0; + int i; + + for (i = 0 ; i < rw->len && ret == 0; i++) { + ret = mmc_test_rw_multiple(test, rw, 512 * 1024, rw->size, + rw->sg_len[i]); + if (ret) + break; + } + return ret; +} + +/* + * Multiple blocking write 4k to 4 MB chunks + */ +static int mmc_test_profile_mult_write_blocking_perf(struct mmc_test_card *test) +{ + unsigned int bs[] = {1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16, + 1 << 17, 1 << 18, 1 << 19, 1 << 20, 1 << 22}; + struct mmc_test_multiple_rw test_data = { + .bs = bs, + .size = TEST_AREA_MAX_SIZE, + .len = ARRAY_SIZE(bs), + .do_write = true, + .do_nonblock_req = false, + .prepare = MMC_TEST_PREP_ERASE, + }; + + return mmc_test_rw_multiple_size(test, &test_data); +}; + +/* + * Multiple non-blocking write 4k to 4 MB chunks + */ +static int mmc_test_profile_mult_write_nonblock_perf(struct mmc_test_card *test) +{ + unsigned int bs[] = {1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16, + 1 << 17, 1 << 18, 1 << 19, 1 << 20, 1 << 22}; + struct mmc_test_multiple_rw test_data = { + .bs = bs, + .size = TEST_AREA_MAX_SIZE, + .len = ARRAY_SIZE(bs), + .do_write = true, + .do_nonblock_req = true, + .prepare = MMC_TEST_PREP_ERASE, + }; + + return mmc_test_rw_multiple_size(test, &test_data); +} + +/* + * Multiple blocking read 4k to 4 MB chunks + */ +static int mmc_test_profile_mult_read_blocking_perf(struct mmc_test_card *test) +{ + unsigned int bs[] = {1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16, + 1 << 17, 1 << 18, 1 << 19, 1 << 20, 1 << 22}; + struct mmc_test_multiple_rw test_data = { + .bs = bs, + .size = TEST_AREA_MAX_SIZE, + .len = ARRAY_SIZE(bs), + .do_write = false, + .do_nonblock_req = false, + .prepare = MMC_TEST_PREP_NONE, + }; + + return mmc_test_rw_multiple_size(test, &test_data); +} + +/* + * Multiple non-blocking read 4k to 4 MB chunks + */ +static int mmc_test_profile_mult_read_nonblock_perf(struct mmc_test_card *test) +{ + unsigned int bs[] = {1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16, + 1 << 17, 1 << 18, 1 << 19, 1 << 20, 1 << 22}; + struct mmc_test_multiple_rw test_data = { + .bs = bs, + .size = TEST_AREA_MAX_SIZE, + .len = ARRAY_SIZE(bs), + .do_write = false, + .do_nonblock_req = true, + .prepare = MMC_TEST_PREP_NONE, + }; + + return mmc_test_rw_multiple_size(test, &test_data); +} + +/* + * Multiple blocking write 1 to 512 sg elements + */ +static int mmc_test_profile_sglen_wr_blocking_perf(struct mmc_test_card *test) +{ + unsigned int sg_len[] = {1, 1 << 3, 1 << 4, 1 << 5, 1 << 6, + 1 << 7, 1 << 8, 1 << 9}; + struct mmc_test_multiple_rw test_data = { + .sg_len = sg_len, + .size = TEST_AREA_MAX_SIZE, + .len = ARRAY_SIZE(sg_len), + .do_write = true, + .do_nonblock_req = false, + .prepare = MMC_TEST_PREP_ERASE, + }; + + return mmc_test_rw_multiple_sg_len(test, &test_data); +}; + +/* + * Multiple non-blocking write 1 to 512 sg elements + */ +static int mmc_test_profile_sglen_wr_nonblock_perf(struct mmc_test_card *test) +{ + unsigned int sg_len[] = {1, 1 << 3, 1 << 4, 1 << 5, 1 << 6, + 1 << 7, 1 << 8, 1 << 9}; + struct mmc_test_multiple_rw test_data = { + .sg_len = sg_len, + .size = TEST_AREA_MAX_SIZE, + .len = ARRAY_SIZE(sg_len), + .do_write = true, + .do_nonblock_req = true, + .prepare = MMC_TEST_PREP_ERASE, + }; + + return mmc_test_rw_multiple_sg_len(test, &test_data); +} + +/* + * Multiple blocking read 1 to 512 sg elements + */ +static int mmc_test_profile_sglen_r_blocking_perf(struct mmc_test_card *test) +{ + unsigned int sg_len[] = {1, 1 << 3, 1 << 4, 1 << 5, 1 << 6, + 1 << 7, 1 << 8, 1 << 9}; + struct mmc_test_multiple_rw test_data = { + .sg_len = sg_len, + .size = TEST_AREA_MAX_SIZE, + .len = ARRAY_SIZE(sg_len), + .do_write = false, + .do_nonblock_req = false, + .prepare = MMC_TEST_PREP_NONE, + }; + + return mmc_test_rw_multiple_sg_len(test, &test_data); +} + +/* + * Multiple non-blocking read 1 to 512 sg elements + */ +static int mmc_test_profile_sglen_r_nonblock_perf(struct mmc_test_card *test) +{ + unsigned int sg_len[] = {1, 1 << 3, 1 << 4, 1 << 5, 1 << 6, + 1 << 7, 1 << 8, 1 << 9}; + struct mmc_test_multiple_rw test_data = { + .sg_len = sg_len, + .size = TEST_AREA_MAX_SIZE, + .len = ARRAY_SIZE(sg_len), + .do_write = false, + .do_nonblock_req = true, + .prepare = MMC_TEST_PREP_NONE, + }; + + return mmc_test_rw_multiple_sg_len(test, &test_data); +} + +/* + * eMMC hardware reset. + */ +static int mmc_test_reset(struct mmc_test_card *test) +{ + struct mmc_card *card = test->card; + struct mmc_host *host = card->host; + int err; + + err = mmc_hw_reset(host); + if (!err) { + /* + * Reset will re-enable the card's command queue, but tests + * expect it to be disabled. + */ + if (card->ext_csd.cmdq_en) + mmc_cmdq_disable(card); + return RESULT_OK; + } else if (err == -EOPNOTSUPP) { + return RESULT_UNSUP_HOST; + } + + return RESULT_FAIL; +} + +static int mmc_test_send_status(struct mmc_test_card *test, + struct mmc_command *cmd) +{ + memset(cmd, 0, sizeof(*cmd)); + + cmd->opcode = MMC_SEND_STATUS; + if (!mmc_host_is_spi(test->card->host)) + cmd->arg = test->card->rca << 16; + cmd->flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC; + + return mmc_wait_for_cmd(test->card->host, cmd, 0); +} + +static int mmc_test_ongoing_transfer(struct mmc_test_card *test, + unsigned int dev_addr, int use_sbc, + int repeat_cmd, int write, int use_areq) +{ + struct mmc_test_req *rq = mmc_test_req_alloc(); + struct mmc_host *host = test->card->host; + struct mmc_test_area *t = &test->area; + struct mmc_request *mrq; + unsigned long timeout; + bool expired = false; + int ret = 0, cmd_ret; + u32 status = 0; + int count = 0; + + if (!rq) + return -ENOMEM; + + mrq = &rq->mrq; + if (use_sbc) + mrq->sbc = &rq->sbc; + mrq->cap_cmd_during_tfr = true; + + mmc_test_prepare_mrq(test, mrq, t->sg, t->sg_len, dev_addr, t->blocks, + 512, write); + + if (use_sbc && t->blocks > 1 && !mrq->sbc) { + ret = mmc_host_cmd23(host) ? + RESULT_UNSUP_CARD : + RESULT_UNSUP_HOST; + goto out_free; + } + + /* Start ongoing data request */ + if (use_areq) { + ret = mmc_test_start_areq(test, mrq, NULL); + if (ret) + goto out_free; + } else { + mmc_wait_for_req(host, mrq); + } + + timeout = jiffies + msecs_to_jiffies(3000); + do { + count += 1; + + /* Send status command while data transfer in progress */ + cmd_ret = mmc_test_send_status(test, &rq->status); + if (cmd_ret) + break; + + status = rq->status.resp[0]; + if (status & R1_ERROR) { + cmd_ret = -EIO; + break; + } + + if (mmc_is_req_done(host, mrq)) + break; + + expired = time_after(jiffies, timeout); + if (expired) { + pr_info("%s: timeout waiting for Tran state status %#x\n", + mmc_hostname(host), status); + cmd_ret = -ETIMEDOUT; + break; + } + } while (repeat_cmd && R1_CURRENT_STATE(status) != R1_STATE_TRAN); + + /* Wait for data request to complete */ + if (use_areq) { + ret = mmc_test_start_areq(test, NULL, mrq); + } else { + mmc_wait_for_req_done(test->card->host, mrq); + } + + /* + * For cap_cmd_during_tfr request, upper layer must send stop if + * required. + */ + if (mrq->data->stop && (mrq->data->error || !mrq->sbc)) { + if (ret) + mmc_wait_for_cmd(host, mrq->data->stop, 0); + else + ret = mmc_wait_for_cmd(host, mrq->data->stop, 0); + } + + if (ret) + goto out_free; + + if (cmd_ret) { + pr_info("%s: Send Status failed: status %#x, error %d\n", + mmc_hostname(test->card->host), status, cmd_ret); + } + + ret = mmc_test_check_result(test, mrq); + if (ret) + goto out_free; + + ret = mmc_test_wait_busy(test); + if (ret) + goto out_free; + + if (repeat_cmd && (t->blocks + 1) << 9 > t->max_tfr) + pr_info("%s: %d commands completed during transfer of %u blocks\n", + mmc_hostname(test->card->host), count, t->blocks); + + if (cmd_ret) + ret = cmd_ret; +out_free: + kfree(rq); + + return ret; +} + +static int __mmc_test_cmds_during_tfr(struct mmc_test_card *test, + unsigned long sz, int use_sbc, int write, + int use_areq) +{ + struct mmc_test_area *t = &test->area; + int ret; + + if (!(test->card->host->caps & MMC_CAP_CMD_DURING_TFR)) + return RESULT_UNSUP_HOST; + + ret = mmc_test_area_map(test, sz, 0, 0, use_areq); + if (ret) + return ret; + + ret = mmc_test_ongoing_transfer(test, t->dev_addr, use_sbc, 0, write, + use_areq); + if (ret) + return ret; + + return mmc_test_ongoing_transfer(test, t->dev_addr, use_sbc, 1, write, + use_areq); +} + +static int mmc_test_cmds_during_tfr(struct mmc_test_card *test, int use_sbc, + int write, int use_areq) +{ + struct mmc_test_area *t = &test->area; + unsigned long sz; + int ret; + + for (sz = 512; sz <= t->max_tfr; sz += 512) { + ret = __mmc_test_cmds_during_tfr(test, sz, use_sbc, write, + use_areq); + if (ret) + return ret; + } + return 0; +} + +/* + * Commands during read - no Set Block Count (CMD23). + */ +static int mmc_test_cmds_during_read(struct mmc_test_card *test) +{ + return mmc_test_cmds_during_tfr(test, 0, 0, 0); +} + +/* + * Commands during write - no Set Block Count (CMD23). + */ +static int mmc_test_cmds_during_write(struct mmc_test_card *test) +{ + return mmc_test_cmds_during_tfr(test, 0, 1, 0); +} + +/* + * Commands during read - use Set Block Count (CMD23). + */ +static int mmc_test_cmds_during_read_cmd23(struct mmc_test_card *test) +{ + return mmc_test_cmds_during_tfr(test, 1, 0, 0); +} + +/* + * Commands during write - use Set Block Count (CMD23). + */ +static int mmc_test_cmds_during_write_cmd23(struct mmc_test_card *test) +{ + return mmc_test_cmds_during_tfr(test, 1, 1, 0); +} + +/* + * Commands during non-blocking read - use Set Block Count (CMD23). + */ +static int mmc_test_cmds_during_read_cmd23_nonblock(struct mmc_test_card *test) +{ + return mmc_test_cmds_during_tfr(test, 1, 0, 1); +} + +/* + * Commands during non-blocking write - use Set Block Count (CMD23). + */ +static int mmc_test_cmds_during_write_cmd23_nonblock(struct mmc_test_card *test) +{ + return mmc_test_cmds_during_tfr(test, 1, 1, 1); +} + +static const struct mmc_test_case mmc_test_cases[] = { + { + .name = "Basic write (no data verification)", + .run = mmc_test_basic_write, + }, + + { + .name = "Basic read (no data verification)", + .run = mmc_test_basic_read, + }, + + { + .name = "Basic write (with data verification)", + .prepare = mmc_test_prepare_write, + .run = mmc_test_verify_write, + .cleanup = mmc_test_cleanup, + }, + + { + .name = "Basic read (with data verification)", + .prepare = mmc_test_prepare_read, + .run = mmc_test_verify_read, + .cleanup = mmc_test_cleanup, + }, + + { + .name = "Multi-block write", + .prepare = mmc_test_prepare_write, + .run = mmc_test_multi_write, + .cleanup = mmc_test_cleanup, + }, + + { + .name = "Multi-block read", + .prepare = mmc_test_prepare_read, + .run = mmc_test_multi_read, + .cleanup = mmc_test_cleanup, + }, + + { + .name = "Power of two block writes", + .prepare = mmc_test_prepare_write, + .run = mmc_test_pow2_write, + .cleanup = mmc_test_cleanup, + }, + + { + .name = "Power of two block reads", + .prepare = mmc_test_prepare_read, + .run = mmc_test_pow2_read, + .cleanup = mmc_test_cleanup, + }, + + { + .name = "Weird sized block writes", + .prepare = mmc_test_prepare_write, + .run = mmc_test_weird_write, + .cleanup = mmc_test_cleanup, + }, + + { + .name = "Weird sized block reads", + .prepare = mmc_test_prepare_read, + .run = mmc_test_weird_read, + .cleanup = mmc_test_cleanup, + }, + + { + .name = "Badly aligned write", + .prepare = mmc_test_prepare_write, + .run = mmc_test_align_write, + .cleanup = mmc_test_cleanup, + }, + + { + .name = "Badly aligned read", + .prepare = mmc_test_prepare_read, + .run = mmc_test_align_read, + .cleanup = mmc_test_cleanup, + }, + + { + .name = "Badly aligned multi-block write", + .prepare = mmc_test_prepare_write, + .run = mmc_test_align_multi_write, + .cleanup = mmc_test_cleanup, + }, + + { + .name = "Badly aligned multi-block read", + .prepare = mmc_test_prepare_read, + .run = mmc_test_align_multi_read, + .cleanup = mmc_test_cleanup, + }, + + { + .name = "Proper xfer_size at write (start failure)", + .run = mmc_test_xfersize_write, + }, + + { + .name = "Proper xfer_size at read (start failure)", + .run = mmc_test_xfersize_read, + }, + + { + .name = "Proper xfer_size at write (midway failure)", + .run = mmc_test_multi_xfersize_write, + }, + + { + .name = "Proper xfer_size at read (midway failure)", + .run = mmc_test_multi_xfersize_read, + }, + +#ifdef CONFIG_HIGHMEM + + { + .name = "Highmem write", + .prepare = mmc_test_prepare_write, + .run = mmc_test_write_high, + .cleanup = mmc_test_cleanup, + }, + + { + .name = "Highmem read", + .prepare = mmc_test_prepare_read, + .run = mmc_test_read_high, + .cleanup = mmc_test_cleanup, + }, + + { + .name = "Multi-block highmem write", + .prepare = mmc_test_prepare_write, + .run = mmc_test_multi_write_high, + .cleanup = mmc_test_cleanup, + }, + + { + .name = "Multi-block highmem read", + .prepare = mmc_test_prepare_read, + .run = mmc_test_multi_read_high, + .cleanup = mmc_test_cleanup, + }, + +#else + + { + .name = "Highmem write", + .run = mmc_test_no_highmem, + }, + + { + .name = "Highmem read", + .run = mmc_test_no_highmem, + }, + + { + .name = "Multi-block highmem write", + .run = mmc_test_no_highmem, + }, + + { + .name = "Multi-block highmem read", + .run = mmc_test_no_highmem, + }, + +#endif /* CONFIG_HIGHMEM */ + + { + .name = "Best-case read performance", + .prepare = mmc_test_area_prepare_fill, + .run = mmc_test_best_read_performance, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Best-case write performance", + .prepare = mmc_test_area_prepare_erase, + .run = mmc_test_best_write_performance, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Best-case read performance into scattered pages", + .prepare = mmc_test_area_prepare_fill, + .run = mmc_test_best_read_perf_max_scatter, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Best-case write performance from scattered pages", + .prepare = mmc_test_area_prepare_erase, + .run = mmc_test_best_write_perf_max_scatter, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Single read performance by transfer size", + .prepare = mmc_test_area_prepare_fill, + .run = mmc_test_profile_read_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Single write performance by transfer size", + .prepare = mmc_test_area_prepare, + .run = mmc_test_profile_write_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Single trim performance by transfer size", + .prepare = mmc_test_area_prepare_fill, + .run = mmc_test_profile_trim_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Consecutive read performance by transfer size", + .prepare = mmc_test_area_prepare_fill, + .run = mmc_test_profile_seq_read_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Consecutive write performance by transfer size", + .prepare = mmc_test_area_prepare, + .run = mmc_test_profile_seq_write_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Consecutive trim performance by transfer size", + .prepare = mmc_test_area_prepare, + .run = mmc_test_profile_seq_trim_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Random read performance by transfer size", + .prepare = mmc_test_area_prepare, + .run = mmc_test_random_read_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Random write performance by transfer size", + .prepare = mmc_test_area_prepare, + .run = mmc_test_random_write_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Large sequential read into scattered pages", + .prepare = mmc_test_area_prepare, + .run = mmc_test_large_seq_read_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Large sequential write from scattered pages", + .prepare = mmc_test_area_prepare, + .run = mmc_test_large_seq_write_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Write performance with blocking req 4k to 4MB", + .prepare = mmc_test_area_prepare, + .run = mmc_test_profile_mult_write_blocking_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Write performance with non-blocking req 4k to 4MB", + .prepare = mmc_test_area_prepare, + .run = mmc_test_profile_mult_write_nonblock_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Read performance with blocking req 4k to 4MB", + .prepare = mmc_test_area_prepare, + .run = mmc_test_profile_mult_read_blocking_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Read performance with non-blocking req 4k to 4MB", + .prepare = mmc_test_area_prepare, + .run = mmc_test_profile_mult_read_nonblock_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Write performance blocking req 1 to 512 sg elems", + .prepare = mmc_test_area_prepare, + .run = mmc_test_profile_sglen_wr_blocking_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Write performance non-blocking req 1 to 512 sg elems", + .prepare = mmc_test_area_prepare, + .run = mmc_test_profile_sglen_wr_nonblock_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Read performance blocking req 1 to 512 sg elems", + .prepare = mmc_test_area_prepare, + .run = mmc_test_profile_sglen_r_blocking_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Read performance non-blocking req 1 to 512 sg elems", + .prepare = mmc_test_area_prepare, + .run = mmc_test_profile_sglen_r_nonblock_perf, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Reset test", + .run = mmc_test_reset, + }, + + { + .name = "Commands during read - no Set Block Count (CMD23)", + .prepare = mmc_test_area_prepare, + .run = mmc_test_cmds_during_read, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Commands during write - no Set Block Count (CMD23)", + .prepare = mmc_test_area_prepare, + .run = mmc_test_cmds_during_write, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Commands during read - use Set Block Count (CMD23)", + .prepare = mmc_test_area_prepare, + .run = mmc_test_cmds_during_read_cmd23, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Commands during write - use Set Block Count (CMD23)", + .prepare = mmc_test_area_prepare, + .run = mmc_test_cmds_during_write_cmd23, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Commands during non-blocking read - use Set Block Count (CMD23)", + .prepare = mmc_test_area_prepare, + .run = mmc_test_cmds_during_read_cmd23_nonblock, + .cleanup = mmc_test_area_cleanup, + }, + + { + .name = "Commands during non-blocking write - use Set Block Count (CMD23)", + .prepare = mmc_test_area_prepare, + .run = mmc_test_cmds_during_write_cmd23_nonblock, + .cleanup = mmc_test_area_cleanup, + }, +}; + +static DEFINE_MUTEX(mmc_test_lock); + +static LIST_HEAD(mmc_test_result); + +static void mmc_test_run(struct mmc_test_card *test, int testcase) +{ + int i, ret; + + pr_info("%s: Starting tests of card %s...\n", + mmc_hostname(test->card->host), mmc_card_id(test->card)); + + mmc_claim_host(test->card->host); + + for (i = 0; i < ARRAY_SIZE(mmc_test_cases); i++) { + struct mmc_test_general_result *gr; + + if (testcase && ((i + 1) != testcase)) + continue; + + pr_info("%s: Test case %d. %s...\n", + mmc_hostname(test->card->host), i + 1, + mmc_test_cases[i].name); + + if (mmc_test_cases[i].prepare) { + ret = mmc_test_cases[i].prepare(test); + if (ret) { + pr_info("%s: Result: Prepare stage failed! (%d)\n", + mmc_hostname(test->card->host), + ret); + continue; + } + } + + gr = kzalloc(sizeof(*gr), GFP_KERNEL); + if (gr) { + INIT_LIST_HEAD(&gr->tr_lst); + + /* Assign data what we know already */ + gr->card = test->card; + gr->testcase = i; + + /* Append container to global one */ + list_add_tail(&gr->link, &mmc_test_result); + + /* + * Save the pointer to created container in our private + * structure. + */ + test->gr = gr; + } + + ret = mmc_test_cases[i].run(test); + switch (ret) { + case RESULT_OK: + pr_info("%s: Result: OK\n", + mmc_hostname(test->card->host)); + break; + case RESULT_FAIL: + pr_info("%s: Result: FAILED\n", + mmc_hostname(test->card->host)); + break; + case RESULT_UNSUP_HOST: + pr_info("%s: Result: UNSUPPORTED (by host)\n", + mmc_hostname(test->card->host)); + break; + case RESULT_UNSUP_CARD: + pr_info("%s: Result: UNSUPPORTED (by card)\n", + mmc_hostname(test->card->host)); + break; + default: + pr_info("%s: Result: ERROR (%d)\n", + mmc_hostname(test->card->host), ret); + } + + /* Save the result */ + if (gr) + gr->result = ret; + + if (mmc_test_cases[i].cleanup) { + ret = mmc_test_cases[i].cleanup(test); + if (ret) { + pr_info("%s: Warning: Cleanup stage failed! (%d)\n", + mmc_hostname(test->card->host), + ret); + } + } + } + + mmc_release_host(test->card->host); + + pr_info("%s: Tests completed.\n", + mmc_hostname(test->card->host)); +} + +static void mmc_test_free_result(struct mmc_card *card) +{ + struct mmc_test_general_result *gr, *grs; + + mutex_lock(&mmc_test_lock); + + list_for_each_entry_safe(gr, grs, &mmc_test_result, link) { + struct mmc_test_transfer_result *tr, *trs; + + if (card && gr->card != card) + continue; + + list_for_each_entry_safe(tr, trs, &gr->tr_lst, link) { + list_del(&tr->link); + kfree(tr); + } + + list_del(&gr->link); + kfree(gr); + } + + mutex_unlock(&mmc_test_lock); +} + +static LIST_HEAD(mmc_test_file_test); + +static int mtf_test_show(struct seq_file *sf, void *data) +{ + struct mmc_card *card = (struct mmc_card *)sf->private; + struct mmc_test_general_result *gr; + + mutex_lock(&mmc_test_lock); + + list_for_each_entry(gr, &mmc_test_result, link) { + struct mmc_test_transfer_result *tr; + + if (gr->card != card) + continue; + + seq_printf(sf, "Test %d: %d\n", gr->testcase + 1, gr->result); + + list_for_each_entry(tr, &gr->tr_lst, link) { + seq_printf(sf, "%u %d %llu.%09u %u %u.%02u\n", + tr->count, tr->sectors, + (u64)tr->ts.tv_sec, (u32)tr->ts.tv_nsec, + tr->rate, tr->iops / 100, tr->iops % 100); + } + } + + mutex_unlock(&mmc_test_lock); + + return 0; +} + +static int mtf_test_open(struct inode *inode, struct file *file) +{ + return single_open(file, mtf_test_show, inode->i_private); +} + +static ssize_t mtf_test_write(struct file *file, const char __user *buf, + size_t count, loff_t *pos) +{ + struct seq_file *sf = (struct seq_file *)file->private_data; + struct mmc_card *card = (struct mmc_card *)sf->private; + struct mmc_test_card *test; + long testcase; + int ret; + + ret = kstrtol_from_user(buf, count, 10, &testcase); + if (ret) + return ret; + + test = kzalloc(sizeof(*test), GFP_KERNEL); + if (!test) + return -ENOMEM; + + /* + * Remove all test cases associated with given card. Thus we have only + * actual data of the last run. + */ + mmc_test_free_result(card); + + test->card = card; + + test->buffer = kzalloc(BUFFER_SIZE, GFP_KERNEL); +#ifdef CONFIG_HIGHMEM + test->highmem = alloc_pages(GFP_KERNEL | __GFP_HIGHMEM, BUFFER_ORDER); +#endif + +#ifdef CONFIG_HIGHMEM + if (test->buffer && test->highmem) { +#else + if (test->buffer) { +#endif + mutex_lock(&mmc_test_lock); + mmc_test_run(test, testcase); + mutex_unlock(&mmc_test_lock); + } + +#ifdef CONFIG_HIGHMEM + __free_pages(test->highmem, BUFFER_ORDER); +#endif + kfree(test->buffer); + kfree(test); + + return count; +} + +static const struct file_operations mmc_test_fops_test = { + .open = mtf_test_open, + .read = seq_read, + .write = mtf_test_write, + .llseek = seq_lseek, + .release = single_release, +}; + +static int mtf_testlist_show(struct seq_file *sf, void *data) +{ + int i; + + mutex_lock(&mmc_test_lock); + + seq_puts(sf, "0:\tRun all tests\n"); + for (i = 0; i < ARRAY_SIZE(mmc_test_cases); i++) + seq_printf(sf, "%d:\t%s\n", i + 1, mmc_test_cases[i].name); + + mutex_unlock(&mmc_test_lock); + + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(mtf_testlist); + +static void mmc_test_free_dbgfs_file(struct mmc_card *card) +{ + struct mmc_test_dbgfs_file *df, *dfs; + + mutex_lock(&mmc_test_lock); + + list_for_each_entry_safe(df, dfs, &mmc_test_file_test, link) { + if (card && df->card != card) + continue; + debugfs_remove(df->file); + list_del(&df->link); + kfree(df); + } + + mutex_unlock(&mmc_test_lock); +} + +static int __mmc_test_register_dbgfs_file(struct mmc_card *card, + const char *name, umode_t mode, const struct file_operations *fops) +{ + struct dentry *file = NULL; + struct mmc_test_dbgfs_file *df; + + if (card->debugfs_root) + file = debugfs_create_file(name, mode, card->debugfs_root, + card, fops); + + df = kmalloc(sizeof(*df), GFP_KERNEL); + if (!df) { + debugfs_remove(file); + return -ENOMEM; + } + + df->card = card; + df->file = file; + + list_add(&df->link, &mmc_test_file_test); + return 0; +} + +static int mmc_test_register_dbgfs_file(struct mmc_card *card) +{ + int ret; + + mutex_lock(&mmc_test_lock); + + ret = __mmc_test_register_dbgfs_file(card, "test", S_IWUSR | S_IRUGO, + &mmc_test_fops_test); + if (ret) + goto err; + + ret = __mmc_test_register_dbgfs_file(card, "testlist", S_IRUGO, + &mtf_testlist_fops); + if (ret) + goto err; + +err: + mutex_unlock(&mmc_test_lock); + + return ret; +} + +static int mmc_test_probe(struct mmc_card *card) +{ + int ret; + + if (!mmc_card_mmc(card) && !mmc_card_sd(card)) + return -ENODEV; + + ret = mmc_test_register_dbgfs_file(card); + if (ret) + return ret; + + if (card->ext_csd.cmdq_en) { + mmc_claim_host(card->host); + ret = mmc_cmdq_disable(card); + mmc_release_host(card->host); + if (ret) + return ret; + } + + dev_info(&card->dev, "Card claimed for testing.\n"); + + return 0; +} + +static void mmc_test_remove(struct mmc_card *card) +{ + if (card->reenable_cmdq) { + mmc_claim_host(card->host); + mmc_cmdq_enable(card); + mmc_release_host(card->host); + } + mmc_test_free_result(card); + mmc_test_free_dbgfs_file(card); +} + +static void mmc_test_shutdown(struct mmc_card *card) +{ +} + +static struct mmc_driver mmc_driver = { + .drv = { + .name = "mmc_test", + }, + .probe = mmc_test_probe, + .remove = mmc_test_remove, + .shutdown = mmc_test_shutdown, +}; + +static int __init mmc_test_init(void) +{ + return mmc_register_driver(&mmc_driver); +} + +static void __exit mmc_test_exit(void) +{ + /* Clear stalled data if card is still plugged */ + mmc_test_free_result(NULL); + mmc_test_free_dbgfs_file(NULL); + + mmc_unregister_driver(&mmc_driver); +} + +module_init(mmc_test_init); +module_exit(mmc_test_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Multimedia Card (MMC) host test driver"); +MODULE_AUTHOR("Pierre Ossman"); diff --git a/drivers/mmc/core/pwrseq.c b/drivers/mmc/core/pwrseq.c new file mode 100644 index 000000000..ef675f364 --- /dev/null +++ b/drivers/mmc/core/pwrseq.c @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014 Linaro Ltd + * + * Author: Ulf Hansson <ulf.hansson@linaro.org> + * + * MMC power sequence management + */ +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/of.h> + +#include <linux/mmc/host.h> + +#include "pwrseq.h" + +static DEFINE_MUTEX(pwrseq_list_mutex); +static LIST_HEAD(pwrseq_list); + +int mmc_pwrseq_alloc(struct mmc_host *host) +{ + struct device_node *np; + struct mmc_pwrseq *p; + + np = of_parse_phandle(host->parent->of_node, "mmc-pwrseq", 0); + if (!np) + return 0; + + mutex_lock(&pwrseq_list_mutex); + list_for_each_entry(p, &pwrseq_list, pwrseq_node) { + if (p->dev->of_node == np) { + if (!try_module_get(p->owner)) + dev_err(host->parent, + "increasing module refcount failed\n"); + else + host->pwrseq = p; + + break; + } + } + + of_node_put(np); + mutex_unlock(&pwrseq_list_mutex); + + if (!host->pwrseq) + return -EPROBE_DEFER; + + dev_info(host->parent, "allocated mmc-pwrseq\n"); + + return 0; +} + +void mmc_pwrseq_pre_power_on(struct mmc_host *host) +{ + struct mmc_pwrseq *pwrseq = host->pwrseq; + + if (pwrseq && pwrseq->ops->pre_power_on) + pwrseq->ops->pre_power_on(host); +} + +void mmc_pwrseq_post_power_on(struct mmc_host *host) +{ + struct mmc_pwrseq *pwrseq = host->pwrseq; + + if (pwrseq && pwrseq->ops->post_power_on) + pwrseq->ops->post_power_on(host); +} + +void mmc_pwrseq_power_off(struct mmc_host *host) +{ + struct mmc_pwrseq *pwrseq = host->pwrseq; + + if (pwrseq && pwrseq->ops->power_off) + pwrseq->ops->power_off(host); +} + +void mmc_pwrseq_reset(struct mmc_host *host) +{ + struct mmc_pwrseq *pwrseq = host->pwrseq; + + if (pwrseq && pwrseq->ops->reset) + pwrseq->ops->reset(host); +} + +void mmc_pwrseq_free(struct mmc_host *host) +{ + struct mmc_pwrseq *pwrseq = host->pwrseq; + + if (pwrseq) { + module_put(pwrseq->owner); + host->pwrseq = NULL; + } +} + +int mmc_pwrseq_register(struct mmc_pwrseq *pwrseq) +{ + if (!pwrseq || !pwrseq->ops || !pwrseq->dev) + return -EINVAL; + + mutex_lock(&pwrseq_list_mutex); + list_add(&pwrseq->pwrseq_node, &pwrseq_list); + mutex_unlock(&pwrseq_list_mutex); + + return 0; +} +EXPORT_SYMBOL_GPL(mmc_pwrseq_register); + +void mmc_pwrseq_unregister(struct mmc_pwrseq *pwrseq) +{ + if (pwrseq) { + mutex_lock(&pwrseq_list_mutex); + list_del(&pwrseq->pwrseq_node); + mutex_unlock(&pwrseq_list_mutex); + } +} +EXPORT_SYMBOL_GPL(mmc_pwrseq_unregister); diff --git a/drivers/mmc/core/pwrseq.h b/drivers/mmc/core/pwrseq.h new file mode 100644 index 000000000..f3bb103db --- /dev/null +++ b/drivers/mmc/core/pwrseq.h @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2014 Linaro Ltd + * + * Author: Ulf Hansson <ulf.hansson@linaro.org> + */ +#ifndef _MMC_CORE_PWRSEQ_H +#define _MMC_CORE_PWRSEQ_H + +#include <linux/types.h> + +struct mmc_host; +struct device; +struct module; + +struct mmc_pwrseq_ops { + void (*pre_power_on)(struct mmc_host *host); + void (*post_power_on)(struct mmc_host *host); + void (*power_off)(struct mmc_host *host); + void (*reset)(struct mmc_host *host); +}; + +struct mmc_pwrseq { + const struct mmc_pwrseq_ops *ops; + struct device *dev; + struct list_head pwrseq_node; + struct module *owner; +}; + +#ifdef CONFIG_OF + +int mmc_pwrseq_register(struct mmc_pwrseq *pwrseq); +void mmc_pwrseq_unregister(struct mmc_pwrseq *pwrseq); + +int mmc_pwrseq_alloc(struct mmc_host *host); +void mmc_pwrseq_pre_power_on(struct mmc_host *host); +void mmc_pwrseq_post_power_on(struct mmc_host *host); +void mmc_pwrseq_power_off(struct mmc_host *host); +void mmc_pwrseq_reset(struct mmc_host *host); +void mmc_pwrseq_free(struct mmc_host *host); + +#else + +static inline int mmc_pwrseq_register(struct mmc_pwrseq *pwrseq) +{ + return -ENOSYS; +} +static inline void mmc_pwrseq_unregister(struct mmc_pwrseq *pwrseq) {} +static inline int mmc_pwrseq_alloc(struct mmc_host *host) { return 0; } +static inline void mmc_pwrseq_pre_power_on(struct mmc_host *host) {} +static inline void mmc_pwrseq_post_power_on(struct mmc_host *host) {} +static inline void mmc_pwrseq_power_off(struct mmc_host *host) {} +static inline void mmc_pwrseq_reset(struct mmc_host *host) {} +static inline void mmc_pwrseq_free(struct mmc_host *host) {} + +#endif + +#endif diff --git a/drivers/mmc/core/pwrseq_emmc.c b/drivers/mmc/core/pwrseq_emmc.c new file mode 100644 index 000000000..f6dde9edd --- /dev/null +++ b/drivers/mmc/core/pwrseq_emmc.c @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2015, Samsung Electronics Co., Ltd. + * + * Author: Marek Szyprowski <m.szyprowski@samsung.com> + * + * Simple eMMC hardware reset provider + */ +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/reboot.h> + +#include <linux/mmc/host.h> + +#include "pwrseq.h" + +struct mmc_pwrseq_emmc { + struct mmc_pwrseq pwrseq; + struct notifier_block reset_nb; + struct gpio_desc *reset_gpio; +}; + +#define to_pwrseq_emmc(p) container_of(p, struct mmc_pwrseq_emmc, pwrseq) + +static void mmc_pwrseq_emmc_reset(struct mmc_host *host) +{ + struct mmc_pwrseq_emmc *pwrseq = to_pwrseq_emmc(host->pwrseq); + + gpiod_set_value_cansleep(pwrseq->reset_gpio, 1); + udelay(1); + gpiod_set_value_cansleep(pwrseq->reset_gpio, 0); + udelay(200); +} + +static int mmc_pwrseq_emmc_reset_nb(struct notifier_block *this, + unsigned long mode, void *cmd) +{ + struct mmc_pwrseq_emmc *pwrseq = container_of(this, + struct mmc_pwrseq_emmc, reset_nb); + gpiod_set_value(pwrseq->reset_gpio, 1); + udelay(1); + gpiod_set_value(pwrseq->reset_gpio, 0); + udelay(200); + + return NOTIFY_DONE; +} + +static const struct mmc_pwrseq_ops mmc_pwrseq_emmc_ops = { + .reset = mmc_pwrseq_emmc_reset, +}; + +static int mmc_pwrseq_emmc_probe(struct platform_device *pdev) +{ + struct mmc_pwrseq_emmc *pwrseq; + struct device *dev = &pdev->dev; + + pwrseq = devm_kzalloc(dev, sizeof(*pwrseq), GFP_KERNEL); + if (!pwrseq) + return -ENOMEM; + + pwrseq->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(pwrseq->reset_gpio)) + return PTR_ERR(pwrseq->reset_gpio); + + if (!gpiod_cansleep(pwrseq->reset_gpio)) { + /* + * register reset handler to ensure emmc reset also from + * emergency_reboot(), priority 255 is the highest priority + * so it will be executed before any system reboot handler. + */ + pwrseq->reset_nb.notifier_call = mmc_pwrseq_emmc_reset_nb; + pwrseq->reset_nb.priority = 255; + register_restart_handler(&pwrseq->reset_nb); + } else { + dev_notice(dev, "EMMC reset pin tied to a sleepy GPIO driver; reset on emergency-reboot disabled\n"); + } + + pwrseq->pwrseq.ops = &mmc_pwrseq_emmc_ops; + pwrseq->pwrseq.dev = dev; + pwrseq->pwrseq.owner = THIS_MODULE; + platform_set_drvdata(pdev, pwrseq); + + return mmc_pwrseq_register(&pwrseq->pwrseq); +} + +static int mmc_pwrseq_emmc_remove(struct platform_device *pdev) +{ + struct mmc_pwrseq_emmc *pwrseq = platform_get_drvdata(pdev); + + unregister_restart_handler(&pwrseq->reset_nb); + mmc_pwrseq_unregister(&pwrseq->pwrseq); + + return 0; +} + +static const struct of_device_id mmc_pwrseq_emmc_of_match[] = { + { .compatible = "mmc-pwrseq-emmc",}, + {/* sentinel */}, +}; + +MODULE_DEVICE_TABLE(of, mmc_pwrseq_emmc_of_match); + +static struct platform_driver mmc_pwrseq_emmc_driver = { + .probe = mmc_pwrseq_emmc_probe, + .remove = mmc_pwrseq_emmc_remove, + .driver = { + .name = "pwrseq_emmc", + .of_match_table = mmc_pwrseq_emmc_of_match, + }, +}; + +module_platform_driver(mmc_pwrseq_emmc_driver); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/core/pwrseq_sd8787.c b/drivers/mmc/core/pwrseq_sd8787.c new file mode 100644 index 000000000..68a826f1c --- /dev/null +++ b/drivers/mmc/core/pwrseq_sd8787.c @@ -0,0 +1,107 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * pwrseq_sd8787.c - power sequence support for Marvell SD8787 BT + Wifi chip + * + * Copyright (C) 2016 Matt Ranostay <matt@ranostay.consulting> + * + * Based on the original work pwrseq_simple.c + * Copyright (C) 2014 Linaro Ltd + * Author: Ulf Hansson <ulf.hansson@linaro.org> + */ + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> + +#include <linux/mmc/host.h> + +#include "pwrseq.h" + +struct mmc_pwrseq_sd8787 { + struct mmc_pwrseq pwrseq; + struct gpio_desc *reset_gpio; + struct gpio_desc *pwrdn_gpio; +}; + +#define to_pwrseq_sd8787(p) container_of(p, struct mmc_pwrseq_sd8787, pwrseq) + +static void mmc_pwrseq_sd8787_pre_power_on(struct mmc_host *host) +{ + struct mmc_pwrseq_sd8787 *pwrseq = to_pwrseq_sd8787(host->pwrseq); + + gpiod_set_value_cansleep(pwrseq->reset_gpio, 1); + + msleep(300); + gpiod_set_value_cansleep(pwrseq->pwrdn_gpio, 1); +} + +static void mmc_pwrseq_sd8787_power_off(struct mmc_host *host) +{ + struct mmc_pwrseq_sd8787 *pwrseq = to_pwrseq_sd8787(host->pwrseq); + + gpiod_set_value_cansleep(pwrseq->pwrdn_gpio, 0); + gpiod_set_value_cansleep(pwrseq->reset_gpio, 0); +} + +static const struct mmc_pwrseq_ops mmc_pwrseq_sd8787_ops = { + .pre_power_on = mmc_pwrseq_sd8787_pre_power_on, + .power_off = mmc_pwrseq_sd8787_power_off, +}; + +static const struct of_device_id mmc_pwrseq_sd8787_of_match[] = { + { .compatible = "mmc-pwrseq-sd8787",}, + {/* sentinel */}, +}; +MODULE_DEVICE_TABLE(of, mmc_pwrseq_sd8787_of_match); + +static int mmc_pwrseq_sd8787_probe(struct platform_device *pdev) +{ + struct mmc_pwrseq_sd8787 *pwrseq; + struct device *dev = &pdev->dev; + + pwrseq = devm_kzalloc(dev, sizeof(*pwrseq), GFP_KERNEL); + if (!pwrseq) + return -ENOMEM; + + pwrseq->pwrdn_gpio = devm_gpiod_get(dev, "powerdown", GPIOD_OUT_LOW); + if (IS_ERR(pwrseq->pwrdn_gpio)) + return PTR_ERR(pwrseq->pwrdn_gpio); + + pwrseq->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(pwrseq->reset_gpio)) + return PTR_ERR(pwrseq->reset_gpio); + + pwrseq->pwrseq.dev = dev; + pwrseq->pwrseq.ops = &mmc_pwrseq_sd8787_ops; + pwrseq->pwrseq.owner = THIS_MODULE; + platform_set_drvdata(pdev, pwrseq); + + return mmc_pwrseq_register(&pwrseq->pwrseq); +} + +static int mmc_pwrseq_sd8787_remove(struct platform_device *pdev) +{ + struct mmc_pwrseq_sd8787 *pwrseq = platform_get_drvdata(pdev); + + mmc_pwrseq_unregister(&pwrseq->pwrseq); + + return 0; +} + +static struct platform_driver mmc_pwrseq_sd8787_driver = { + .probe = mmc_pwrseq_sd8787_probe, + .remove = mmc_pwrseq_sd8787_remove, + .driver = { + .name = "pwrseq_sd8787", + .of_match_table = mmc_pwrseq_sd8787_of_match, + }, +}; + +module_platform_driver(mmc_pwrseq_sd8787_driver); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c new file mode 100644 index 000000000..ea4d36705 --- /dev/null +++ b/drivers/mmc/core/pwrseq_simple.c @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014 Linaro Ltd + * + * Author: Ulf Hansson <ulf.hansson@linaro.org> + * + * Simple MMC power sequence management + */ +#include <linux/clk.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/delay.h> +#include <linux/property.h> + +#include <linux/mmc/host.h> + +#include "pwrseq.h" + +struct mmc_pwrseq_simple { + struct mmc_pwrseq pwrseq; + bool clk_enabled; + u32 post_power_on_delay_ms; + u32 power_off_delay_us; + struct clk *ext_clk; + struct gpio_descs *reset_gpios; +}; + +#define to_pwrseq_simple(p) container_of(p, struct mmc_pwrseq_simple, pwrseq) + +static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq, + int value) +{ + struct gpio_descs *reset_gpios = pwrseq->reset_gpios; + + if (!IS_ERR(reset_gpios)) { + unsigned long *values; + int nvalues = reset_gpios->ndescs; + + values = bitmap_alloc(nvalues, GFP_KERNEL); + if (!values) + return; + + if (value) + bitmap_fill(values, nvalues); + else + bitmap_zero(values, nvalues); + + gpiod_set_array_value_cansleep(nvalues, reset_gpios->desc, + reset_gpios->info, values); + + kfree(values); + } +} + +static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host) +{ + struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq); + + if (!IS_ERR(pwrseq->ext_clk) && !pwrseq->clk_enabled) { + clk_prepare_enable(pwrseq->ext_clk); + pwrseq->clk_enabled = true; + } + + mmc_pwrseq_simple_set_gpios_value(pwrseq, 1); +} + +static void mmc_pwrseq_simple_post_power_on(struct mmc_host *host) +{ + struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq); + + mmc_pwrseq_simple_set_gpios_value(pwrseq, 0); + + if (pwrseq->post_power_on_delay_ms) + msleep(pwrseq->post_power_on_delay_ms); +} + +static void mmc_pwrseq_simple_power_off(struct mmc_host *host) +{ + struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq); + + mmc_pwrseq_simple_set_gpios_value(pwrseq, 1); + + if (pwrseq->power_off_delay_us) + usleep_range(pwrseq->power_off_delay_us, + 2 * pwrseq->power_off_delay_us); + + if (!IS_ERR(pwrseq->ext_clk) && pwrseq->clk_enabled) { + clk_disable_unprepare(pwrseq->ext_clk); + pwrseq->clk_enabled = false; + } +} + +static const struct mmc_pwrseq_ops mmc_pwrseq_simple_ops = { + .pre_power_on = mmc_pwrseq_simple_pre_power_on, + .post_power_on = mmc_pwrseq_simple_post_power_on, + .power_off = mmc_pwrseq_simple_power_off, +}; + +static const struct of_device_id mmc_pwrseq_simple_of_match[] = { + { .compatible = "mmc-pwrseq-simple",}, + {/* sentinel */}, +}; +MODULE_DEVICE_TABLE(of, mmc_pwrseq_simple_of_match); + +static int mmc_pwrseq_simple_probe(struct platform_device *pdev) +{ + struct mmc_pwrseq_simple *pwrseq; + struct device *dev = &pdev->dev; + + pwrseq = devm_kzalloc(dev, sizeof(*pwrseq), GFP_KERNEL); + if (!pwrseq) + return -ENOMEM; + + pwrseq->ext_clk = devm_clk_get(dev, "ext_clock"); + if (IS_ERR(pwrseq->ext_clk) && PTR_ERR(pwrseq->ext_clk) != -ENOENT) + return PTR_ERR(pwrseq->ext_clk); + + pwrseq->reset_gpios = devm_gpiod_get_array(dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(pwrseq->reset_gpios) && + PTR_ERR(pwrseq->reset_gpios) != -ENOENT && + PTR_ERR(pwrseq->reset_gpios) != -ENOSYS) { + return PTR_ERR(pwrseq->reset_gpios); + } + + device_property_read_u32(dev, "post-power-on-delay-ms", + &pwrseq->post_power_on_delay_ms); + device_property_read_u32(dev, "power-off-delay-us", + &pwrseq->power_off_delay_us); + + pwrseq->pwrseq.dev = dev; + pwrseq->pwrseq.ops = &mmc_pwrseq_simple_ops; + pwrseq->pwrseq.owner = THIS_MODULE; + platform_set_drvdata(pdev, pwrseq); + + return mmc_pwrseq_register(&pwrseq->pwrseq); +} + +static int mmc_pwrseq_simple_remove(struct platform_device *pdev) +{ + struct mmc_pwrseq_simple *pwrseq = platform_get_drvdata(pdev); + + mmc_pwrseq_unregister(&pwrseq->pwrseq); + + return 0; +} + +static struct platform_driver mmc_pwrseq_simple_driver = { + .probe = mmc_pwrseq_simple_probe, + .remove = mmc_pwrseq_simple_remove, + .driver = { + .name = "pwrseq_simple", + .of_match_table = mmc_pwrseq_simple_of_match, + }, +}; + +module_platform_driver(mmc_pwrseq_simple_driver); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c new file mode 100644 index 000000000..002426e3c --- /dev/null +++ b/drivers/mmc/core/queue.c @@ -0,0 +1,539 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2003 Russell King, All Rights Reserved. + * Copyright 2006-2007 Pierre Ossman + */ +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/blkdev.h> +#include <linux/freezer.h> +#include <linux/kthread.h> +#include <linux/scatterlist.h> +#include <linux/dma-mapping.h> +#include <linux/backing-dev.h> + +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> + +#include "queue.h" +#include "block.h" +#include "core.h" +#include "card.h" +#include "host.h" + +#define MMC_DMA_MAP_MERGE_SEGMENTS 512 + +static inline bool mmc_cqe_dcmd_busy(struct mmc_queue *mq) +{ + /* Allow only 1 DCMD at a time */ + return mq->in_flight[MMC_ISSUE_DCMD]; +} + +void mmc_cqe_check_busy(struct mmc_queue *mq) +{ + if ((mq->cqe_busy & MMC_CQE_DCMD_BUSY) && !mmc_cqe_dcmd_busy(mq)) + mq->cqe_busy &= ~MMC_CQE_DCMD_BUSY; + + mq->cqe_busy &= ~MMC_CQE_QUEUE_FULL; +} + +static inline bool mmc_cqe_can_dcmd(struct mmc_host *host) +{ + return host->caps2 & MMC_CAP2_CQE_DCMD; +} + +static enum mmc_issue_type mmc_cqe_issue_type(struct mmc_host *host, + struct request *req) +{ + switch (req_op(req)) { + case REQ_OP_DRV_IN: + case REQ_OP_DRV_OUT: + case REQ_OP_DISCARD: + case REQ_OP_SECURE_ERASE: + return MMC_ISSUE_SYNC; + case REQ_OP_FLUSH: + return mmc_cqe_can_dcmd(host) ? MMC_ISSUE_DCMD : MMC_ISSUE_SYNC; + default: + return MMC_ISSUE_ASYNC; + } +} + +enum mmc_issue_type mmc_issue_type(struct mmc_queue *mq, struct request *req) +{ + struct mmc_host *host = mq->card->host; + + if (mq->use_cqe && !host->hsq_enabled) + return mmc_cqe_issue_type(host, req); + + if (req_op(req) == REQ_OP_READ || req_op(req) == REQ_OP_WRITE) + return MMC_ISSUE_ASYNC; + + return MMC_ISSUE_SYNC; +} + +static void __mmc_cqe_recovery_notifier(struct mmc_queue *mq) +{ + if (!mq->recovery_needed) { + mq->recovery_needed = true; + schedule_work(&mq->recovery_work); + } +} + +void mmc_cqe_recovery_notifier(struct mmc_request *mrq) +{ + struct mmc_queue_req *mqrq = container_of(mrq, struct mmc_queue_req, + brq.mrq); + struct request *req = mmc_queue_req_to_req(mqrq); + struct request_queue *q = req->q; + struct mmc_queue *mq = q->queuedata; + unsigned long flags; + + spin_lock_irqsave(&mq->lock, flags); + __mmc_cqe_recovery_notifier(mq); + spin_unlock_irqrestore(&mq->lock, flags); +} + +static enum blk_eh_timer_return mmc_cqe_timed_out(struct request *req) +{ + struct mmc_queue_req *mqrq = req_to_mmc_queue_req(req); + struct mmc_request *mrq = &mqrq->brq.mrq; + struct mmc_queue *mq = req->q->queuedata; + struct mmc_host *host = mq->card->host; + enum mmc_issue_type issue_type = mmc_issue_type(mq, req); + bool recovery_needed = false; + + switch (issue_type) { + case MMC_ISSUE_ASYNC: + case MMC_ISSUE_DCMD: + if (host->cqe_ops->cqe_timeout(host, mrq, &recovery_needed)) { + if (recovery_needed) + mmc_cqe_recovery_notifier(mrq); + return BLK_EH_RESET_TIMER; + } + /* The request has gone already */ + return BLK_EH_DONE; + default: + /* Timeout is handled by mmc core */ + return BLK_EH_RESET_TIMER; + } +} + +static enum blk_eh_timer_return mmc_mq_timed_out(struct request *req, + bool reserved) +{ + struct request_queue *q = req->q; + struct mmc_queue *mq = q->queuedata; + struct mmc_card *card = mq->card; + struct mmc_host *host = card->host; + unsigned long flags; + bool ignore_tout; + + spin_lock_irqsave(&mq->lock, flags); + ignore_tout = mq->recovery_needed || !mq->use_cqe || host->hsq_enabled; + spin_unlock_irqrestore(&mq->lock, flags); + + return ignore_tout ? BLK_EH_RESET_TIMER : mmc_cqe_timed_out(req); +} + +static void mmc_mq_recovery_handler(struct work_struct *work) +{ + struct mmc_queue *mq = container_of(work, struct mmc_queue, + recovery_work); + struct request_queue *q = mq->queue; + struct mmc_host *host = mq->card->host; + + mmc_get_card(mq->card, &mq->ctx); + + mq->in_recovery = true; + + if (mq->use_cqe && !host->hsq_enabled) + mmc_blk_cqe_recovery(mq); + else + mmc_blk_mq_recovery(mq); + + mq->in_recovery = false; + + spin_lock_irq(&mq->lock); + mq->recovery_needed = false; + spin_unlock_irq(&mq->lock); + + if (host->hsq_enabled) + host->cqe_ops->cqe_recovery_finish(host); + + mmc_put_card(mq->card, &mq->ctx); + + blk_mq_run_hw_queues(q, true); +} + +static struct scatterlist *mmc_alloc_sg(int sg_len, gfp_t gfp) +{ + struct scatterlist *sg; + + sg = kmalloc_array(sg_len, sizeof(*sg), gfp); + if (sg) + sg_init_table(sg, sg_len); + + return sg; +} + +static void mmc_queue_setup_discard(struct request_queue *q, + struct mmc_card *card) +{ + unsigned max_discard; + + max_discard = mmc_calc_max_discard(card); + if (!max_discard) + return; + + blk_queue_flag_set(QUEUE_FLAG_DISCARD, q); + blk_queue_max_discard_sectors(q, max_discard); + q->limits.discard_granularity = card->pref_erase << 9; + /* granularity must not be greater than max. discard */ + if (card->pref_erase > max_discard) + q->limits.discard_granularity = SECTOR_SIZE; + if (mmc_can_secure_erase_trim(card)) + blk_queue_flag_set(QUEUE_FLAG_SECERASE, q); +} + +static unsigned int mmc_get_max_segments(struct mmc_host *host) +{ + return host->can_dma_map_merge ? MMC_DMA_MAP_MERGE_SEGMENTS : + host->max_segs; +} + +/** + * mmc_init_request() - initialize the MMC-specific per-request data + * @mq: the request queue + * @req: the request + * @gfp: memory allocation policy + */ +static int __mmc_init_request(struct mmc_queue *mq, struct request *req, + gfp_t gfp) +{ + struct mmc_queue_req *mq_rq = req_to_mmc_queue_req(req); + struct mmc_card *card = mq->card; + struct mmc_host *host = card->host; + + mq_rq->sg = mmc_alloc_sg(mmc_get_max_segments(host), gfp); + if (!mq_rq->sg) + return -ENOMEM; + + return 0; +} + +static void mmc_exit_request(struct request_queue *q, struct request *req) +{ + struct mmc_queue_req *mq_rq = req_to_mmc_queue_req(req); + + kfree(mq_rq->sg); + mq_rq->sg = NULL; +} + +static int mmc_mq_init_request(struct blk_mq_tag_set *set, struct request *req, + unsigned int hctx_idx, unsigned int numa_node) +{ + return __mmc_init_request(set->driver_data, req, GFP_KERNEL); +} + +static void mmc_mq_exit_request(struct blk_mq_tag_set *set, struct request *req, + unsigned int hctx_idx) +{ + struct mmc_queue *mq = set->driver_data; + + mmc_exit_request(mq->queue, req); +} + +static blk_status_t mmc_mq_queue_rq(struct blk_mq_hw_ctx *hctx, + const struct blk_mq_queue_data *bd) +{ + struct request *req = bd->rq; + struct request_queue *q = req->q; + struct mmc_queue *mq = q->queuedata; + struct mmc_card *card = mq->card; + struct mmc_host *host = card->host; + enum mmc_issue_type issue_type; + enum mmc_issued issued; + bool get_card, cqe_retune_ok; + int ret; + + if (mmc_card_removed(mq->card)) { + req->rq_flags |= RQF_QUIET; + return BLK_STS_IOERR; + } + + issue_type = mmc_issue_type(mq, req); + + spin_lock_irq(&mq->lock); + + if (mq->recovery_needed || mq->busy) { + spin_unlock_irq(&mq->lock); + return BLK_STS_RESOURCE; + } + + switch (issue_type) { + case MMC_ISSUE_DCMD: + if (mmc_cqe_dcmd_busy(mq)) { + mq->cqe_busy |= MMC_CQE_DCMD_BUSY; + spin_unlock_irq(&mq->lock); + return BLK_STS_RESOURCE; + } + break; + case MMC_ISSUE_ASYNC: + /* + * For MMC host software queue, we only allow 2 requests in + * flight to avoid a long latency. + */ + if (host->hsq_enabled && mq->in_flight[issue_type] > 2) { + spin_unlock_irq(&mq->lock); + return BLK_STS_RESOURCE; + } + break; + default: + /* + * Timeouts are handled by mmc core, and we don't have a host + * API to abort requests, so we can't handle the timeout anyway. + * However, when the timeout happens, blk_mq_complete_request() + * no longer works (to stop the request disappearing under us). + * To avoid racing with that, set a large timeout. + */ + req->timeout = 600 * HZ; + break; + } + + /* Parallel dispatch of requests is not supported at the moment */ + mq->busy = true; + + mq->in_flight[issue_type] += 1; + get_card = (mmc_tot_in_flight(mq) == 1); + cqe_retune_ok = (mmc_cqe_qcnt(mq) == 1); + + spin_unlock_irq(&mq->lock); + + if (!(req->rq_flags & RQF_DONTPREP)) { + req_to_mmc_queue_req(req)->retries = 0; + req->rq_flags |= RQF_DONTPREP; + } + + if (get_card) + mmc_get_card(card, &mq->ctx); + + if (mq->use_cqe) { + host->retune_now = host->need_retune && cqe_retune_ok && + !host->hold_retune; + } + + blk_mq_start_request(req); + + issued = mmc_blk_mq_issue_rq(mq, req); + + switch (issued) { + case MMC_REQ_BUSY: + ret = BLK_STS_RESOURCE; + break; + case MMC_REQ_FAILED_TO_START: + ret = BLK_STS_IOERR; + break; + default: + ret = BLK_STS_OK; + break; + } + + if (issued != MMC_REQ_STARTED) { + bool put_card = false; + + spin_lock_irq(&mq->lock); + mq->in_flight[issue_type] -= 1; + if (mmc_tot_in_flight(mq) == 0) + put_card = true; + mq->busy = false; + spin_unlock_irq(&mq->lock); + if (put_card) + mmc_put_card(card, &mq->ctx); + } else { + WRITE_ONCE(mq->busy, false); + } + + return ret; +} + +static const struct blk_mq_ops mmc_mq_ops = { + .queue_rq = mmc_mq_queue_rq, + .init_request = mmc_mq_init_request, + .exit_request = mmc_mq_exit_request, + .complete = mmc_blk_mq_complete, + .timeout = mmc_mq_timed_out, +}; + +static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card) +{ + struct mmc_host *host = card->host; + unsigned block_size = 512; + + blk_queue_flag_set(QUEUE_FLAG_NONROT, mq->queue); + blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, mq->queue); + if (mmc_can_erase(card)) + mmc_queue_setup_discard(mq->queue, card); + + if (!mmc_dev(host)->dma_mask || !*mmc_dev(host)->dma_mask) + blk_queue_bounce_limit(mq->queue, BLK_BOUNCE_HIGH); + blk_queue_max_hw_sectors(mq->queue, + min(host->max_blk_count, host->max_req_size / 512)); + if (host->can_dma_map_merge) + WARN(!blk_queue_can_use_dma_map_merging(mq->queue, + mmc_dev(host)), + "merging was advertised but not possible"); + blk_queue_max_segments(mq->queue, mmc_get_max_segments(host)); + + if (mmc_card_mmc(card) && card->ext_csd.data_sector_size) { + block_size = card->ext_csd.data_sector_size; + WARN_ON(block_size != 512 && block_size != 4096); + } + + blk_queue_logical_block_size(mq->queue, block_size); + /* + * After blk_queue_can_use_dma_map_merging() was called with succeed, + * since it calls blk_queue_virt_boundary(), the mmc should not call + * both blk_queue_max_segment_size(). + */ + if (!host->can_dma_map_merge) + blk_queue_max_segment_size(mq->queue, + round_down(host->max_seg_size, block_size)); + + dma_set_max_seg_size(mmc_dev(host), queue_max_segment_size(mq->queue)); + + INIT_WORK(&mq->recovery_work, mmc_mq_recovery_handler); + INIT_WORK(&mq->complete_work, mmc_blk_mq_complete_work); + + mutex_init(&mq->complete_lock); + + init_waitqueue_head(&mq->wait); +} + +static inline bool mmc_merge_capable(struct mmc_host *host) +{ + return host->caps2 & MMC_CAP2_MERGE_CAPABLE; +} + +/* Set queue depth to get a reasonable value for q->nr_requests */ +#define MMC_QUEUE_DEPTH 64 + +/** + * mmc_init_queue - initialise a queue structure. + * @mq: mmc queue + * @card: mmc card to attach this queue + * + * Initialise a MMC card request queue. + */ +int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card) +{ + struct mmc_host *host = card->host; + int ret; + + mq->card = card; + mq->use_cqe = host->cqe_enabled; + + spin_lock_init(&mq->lock); + + memset(&mq->tag_set, 0, sizeof(mq->tag_set)); + mq->tag_set.ops = &mmc_mq_ops; + /* + * The queue depth for CQE must match the hardware because the request + * tag is used to index the hardware queue. + */ + if (mq->use_cqe && !host->hsq_enabled) + mq->tag_set.queue_depth = + min_t(int, card->ext_csd.cmdq_depth, host->cqe_qdepth); + else + mq->tag_set.queue_depth = MMC_QUEUE_DEPTH; + mq->tag_set.numa_node = NUMA_NO_NODE; + mq->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_BLOCKING; + mq->tag_set.nr_hw_queues = 1; + mq->tag_set.cmd_size = sizeof(struct mmc_queue_req); + mq->tag_set.driver_data = mq; + + /* + * Since blk_mq_alloc_tag_set() calls .init_request() of mmc_mq_ops, + * the host->can_dma_map_merge should be set before to get max_segs + * from mmc_get_max_segments(). + */ + if (mmc_merge_capable(host) && + host->max_segs < MMC_DMA_MAP_MERGE_SEGMENTS && + dma_get_merge_boundary(mmc_dev(host))) + host->can_dma_map_merge = 1; + else + host->can_dma_map_merge = 0; + + ret = blk_mq_alloc_tag_set(&mq->tag_set); + if (ret) + return ret; + + mq->queue = blk_mq_init_queue(&mq->tag_set); + if (IS_ERR(mq->queue)) { + ret = PTR_ERR(mq->queue); + goto free_tag_set; + } + + if (mmc_host_is_spi(host) && host->use_spi_crc) + blk_queue_flag_set(QUEUE_FLAG_STABLE_WRITES, mq->queue); + + mq->queue->queuedata = mq; + blk_queue_rq_timeout(mq->queue, 60 * HZ); + + mmc_setup_queue(mq, card); + return 0; + +free_tag_set: + blk_mq_free_tag_set(&mq->tag_set); + return ret; +} + +void mmc_queue_suspend(struct mmc_queue *mq) +{ + blk_mq_quiesce_queue(mq->queue); + + /* + * The host remains claimed while there are outstanding requests, so + * simply claiming and releasing here ensures there are none. + */ + mmc_claim_host(mq->card->host); + mmc_release_host(mq->card->host); +} + +void mmc_queue_resume(struct mmc_queue *mq) +{ + blk_mq_unquiesce_queue(mq->queue); +} + +void mmc_cleanup_queue(struct mmc_queue *mq) +{ + struct request_queue *q = mq->queue; + + /* + * The legacy code handled the possibility of being suspended, + * so do that here too. + */ + if (blk_queue_quiesced(q)) + blk_mq_unquiesce_queue(q); + + blk_cleanup_queue(q); + blk_mq_free_tag_set(&mq->tag_set); + + /* + * A request can be completed before the next request, potentially + * leaving a complete_work with nothing to do. Such a work item might + * still be queued at this point. Flush it. + */ + flush_work(&mq->complete_work); + + mq->card = NULL; +} + +/* + * Prepare the sg list(s) to be handed of to the host driver + */ +unsigned int mmc_queue_map_sg(struct mmc_queue *mq, struct mmc_queue_req *mqrq) +{ + struct request *req = mmc_queue_req_to_req(mqrq); + + return blk_rq_map_sg(mq->queue, req, mqrq->sg); +} diff --git a/drivers/mmc/core/queue.h b/drivers/mmc/core/queue.h new file mode 100644 index 000000000..fd11491ce --- /dev/null +++ b/drivers/mmc/core/queue.h @@ -0,0 +1,124 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef MMC_QUEUE_H +#define MMC_QUEUE_H + +#include <linux/types.h> +#include <linux/blkdev.h> +#include <linux/blk-mq.h> +#include <linux/mmc/core.h> +#include <linux/mmc/host.h> + +enum mmc_issued { + MMC_REQ_STARTED, + MMC_REQ_BUSY, + MMC_REQ_FAILED_TO_START, + MMC_REQ_FINISHED, +}; + +enum mmc_issue_type { + MMC_ISSUE_SYNC, + MMC_ISSUE_DCMD, + MMC_ISSUE_ASYNC, + MMC_ISSUE_MAX, +}; + +static inline struct mmc_queue_req *req_to_mmc_queue_req(struct request *rq) +{ + return blk_mq_rq_to_pdu(rq); +} + +struct mmc_queue_req; + +static inline struct request *mmc_queue_req_to_req(struct mmc_queue_req *mqr) +{ + return blk_mq_rq_from_pdu(mqr); +} + +struct mmc_blk_data; +struct mmc_blk_ioc_data; + +struct mmc_blk_request { + struct mmc_request mrq; + struct mmc_command sbc; + struct mmc_command cmd; + struct mmc_command stop; + struct mmc_data data; +}; + +/** + * enum mmc_drv_op - enumerates the operations in the mmc_queue_req + * @MMC_DRV_OP_IOCTL: ioctl operation + * @MMC_DRV_OP_IOCTL_RPMB: RPMB-oriented ioctl operation + * @MMC_DRV_OP_BOOT_WP: write protect boot partitions + * @MMC_DRV_OP_GET_CARD_STATUS: get card status + * @MMC_DRV_OP_GET_EXT_CSD: get the EXT CSD from an eMMC card + */ +enum mmc_drv_op { + MMC_DRV_OP_IOCTL, + MMC_DRV_OP_IOCTL_RPMB, + MMC_DRV_OP_BOOT_WP, + MMC_DRV_OP_GET_CARD_STATUS, + MMC_DRV_OP_GET_EXT_CSD, +}; + +struct mmc_queue_req { + struct mmc_blk_request brq; + struct scatterlist *sg; + enum mmc_drv_op drv_op; + int drv_op_result; + void *drv_op_data; + unsigned int ioc_count; + int retries; +}; + +struct mmc_queue { + struct mmc_card *card; + struct mmc_ctx ctx; + struct blk_mq_tag_set tag_set; + struct mmc_blk_data *blkdata; + struct request_queue *queue; + spinlock_t lock; + int in_flight[MMC_ISSUE_MAX]; + unsigned int cqe_busy; +#define MMC_CQE_DCMD_BUSY BIT(0) +#define MMC_CQE_QUEUE_FULL BIT(1) + bool busy; + bool use_cqe; + bool recovery_needed; + bool in_recovery; + bool rw_wait; + bool waiting; + struct work_struct recovery_work; + wait_queue_head_t wait; + struct request *recovery_req; + struct request *complete_req; + struct mutex complete_lock; + struct work_struct complete_work; +}; + +extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *); +extern void mmc_cleanup_queue(struct mmc_queue *); +extern void mmc_queue_suspend(struct mmc_queue *); +extern void mmc_queue_resume(struct mmc_queue *); +extern unsigned int mmc_queue_map_sg(struct mmc_queue *, + struct mmc_queue_req *); + +void mmc_cqe_check_busy(struct mmc_queue *mq); +void mmc_cqe_recovery_notifier(struct mmc_request *mrq); + +enum mmc_issue_type mmc_issue_type(struct mmc_queue *mq, struct request *req); + +static inline int mmc_tot_in_flight(struct mmc_queue *mq) +{ + return mq->in_flight[MMC_ISSUE_SYNC] + + mq->in_flight[MMC_ISSUE_DCMD] + + mq->in_flight[MMC_ISSUE_ASYNC]; +} + +static inline int mmc_cqe_qcnt(struct mmc_queue *mq) +{ + return mq->in_flight[MMC_ISSUE_DCMD] + + mq->in_flight[MMC_ISSUE_ASYNC]; +} + +#endif diff --git a/drivers/mmc/core/quirks.h b/drivers/mmc/core/quirks.h new file mode 100644 index 000000000..afe8d8c5f --- /dev/null +++ b/drivers/mmc/core/quirks.h @@ -0,0 +1,193 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This file contains work-arounds for many known SD/MMC + * and SDIO hardware bugs. + * + * Copyright (c) 2011 Andrei Warkentin <andreiw@motorola.com> + * Copyright (c) 2011 Pierre Tardy <tardyp@gmail.com> + * Inspired from pci fixup code: + * Copyright (c) 1999 Martin Mares <mj@ucw.cz> + * + */ + +#include <linux/mmc/sdio_ids.h> + +#include "card.h" + +static const struct mmc_fixup __maybe_unused mmc_blk_fixups[] = { +#define INAND_CMD38_ARG_EXT_CSD 113 +#define INAND_CMD38_ARG_ERASE 0x00 +#define INAND_CMD38_ARG_TRIM 0x01 +#define INAND_CMD38_ARG_SECERASE 0x80 +#define INAND_CMD38_ARG_SECTRIM1 0x81 +#define INAND_CMD38_ARG_SECTRIM2 0x88 + /* CMD38 argument is passed through EXT_CSD[113] */ + MMC_FIXUP("SEM02G", CID_MANFID_SANDISK, 0x100, add_quirk, + MMC_QUIRK_INAND_CMD38), + MMC_FIXUP("SEM04G", CID_MANFID_SANDISK, 0x100, add_quirk, + MMC_QUIRK_INAND_CMD38), + MMC_FIXUP("SEM08G", CID_MANFID_SANDISK, 0x100, add_quirk, + MMC_QUIRK_INAND_CMD38), + MMC_FIXUP("SEM16G", CID_MANFID_SANDISK, 0x100, add_quirk, + MMC_QUIRK_INAND_CMD38), + MMC_FIXUP("SEM32G", CID_MANFID_SANDISK, 0x100, add_quirk, + MMC_QUIRK_INAND_CMD38), + + /* + * Some MMC cards experience performance degradation with CMD23 + * instead of CMD12-bounded multiblock transfers. For now we'll + * black list what's bad... + * - Certain Toshiba cards. + * + * N.B. This doesn't affect SD cards. + */ + MMC_FIXUP("SDMB-32", CID_MANFID_SANDISK, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_BLK_NO_CMD23), + MMC_FIXUP("SDM032", CID_MANFID_SANDISK, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_BLK_NO_CMD23), + MMC_FIXUP("MMC08G", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_BLK_NO_CMD23), + MMC_FIXUP("MMC16G", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_BLK_NO_CMD23), + MMC_FIXUP("MMC32G", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_BLK_NO_CMD23), + + /* + * Some SD cards lockup while using CMD23 multiblock transfers. + */ + MMC_FIXUP("AF SD", CID_MANFID_ATP, CID_OEMID_ANY, add_quirk_sd, + MMC_QUIRK_BLK_NO_CMD23), + MMC_FIXUP("APUSD", CID_MANFID_APACER, 0x5048, add_quirk_sd, + MMC_QUIRK_BLK_NO_CMD23), + + /* + * Some MMC cards need longer data read timeout than indicated in CSD. + */ + MMC_FIXUP(CID_NAME_ANY, CID_MANFID_MICRON, 0x200, add_quirk_mmc, + MMC_QUIRK_LONG_READ_TIME), + MMC_FIXUP("008GE0", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_LONG_READ_TIME), + + /* + * On these Samsung MoviNAND parts, performing secure erase or + * secure trim can result in unrecoverable corruption due to a + * firmware bug. + */ + MMC_FIXUP("M8G2FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("MAG4FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("MBG8FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("MCGAFA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("VAL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("VYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("KYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + MMC_FIXUP("VZL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_SEC_ERASE_TRIM_BROKEN), + + /* + * On Some Kingston eMMCs, performing trim can result in + * unrecoverable data conrruption occasionally due to a firmware bug. + */ + MMC_FIXUP("V10008", CID_MANFID_KINGSTON, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_TRIM_BROKEN), + MMC_FIXUP("V10016", CID_MANFID_KINGSTON, CID_OEMID_ANY, add_quirk_mmc, + MMC_QUIRK_TRIM_BROKEN), + + /* + * Kingston EMMC04G-M627 advertises TRIM but it does not seems to + * support being used to offload WRITE_ZEROES. + */ + MMC_FIXUP("M62704", CID_MANFID_KINGSTON, 0x0100, add_quirk_mmc, + MMC_QUIRK_TRIM_BROKEN), + + /* + * Micron MTFC4GACAJCN-1M advertises TRIM but it does not seems to + * support being used to offload WRITE_ZEROES. + */ + MMC_FIXUP("Q2J54A", CID_MANFID_MICRON, 0x014e, add_quirk_mmc, + MMC_QUIRK_TRIM_BROKEN), + + /* + * Some SD cards reports discard support while they don't + */ + MMC_FIXUP(CID_NAME_ANY, CID_MANFID_SANDISK_SD, 0x5344, add_quirk_sd, + MMC_QUIRK_BROKEN_SD_DISCARD), + + END_FIXUP +}; + +static const struct mmc_fixup __maybe_unused mmc_ext_csd_fixups[] = { + /* + * Certain Hynix eMMC 4.41 cards might get broken when HPI feature + * is used so disable the HPI feature for such buggy cards. + */ + MMC_FIXUP_EXT_CSD_REV(CID_NAME_ANY, CID_MANFID_HYNIX, + 0x014a, add_quirk, MMC_QUIRK_BROKEN_HPI, 5), + /* + * Certain Micron (Numonyx) eMMC 4.5 cards might get broken when HPI + * feature is used so disable the HPI feature for such buggy cards. + */ + MMC_FIXUP_EXT_CSD_REV(CID_NAME_ANY, CID_MANFID_NUMONYX, + 0x014e, add_quirk, MMC_QUIRK_BROKEN_HPI, 6), + + END_FIXUP +}; + + +static const struct mmc_fixup __maybe_unused sdio_fixup_methods[] = { + SDIO_FIXUP(SDIO_VENDOR_ID_TI_WL1251, SDIO_DEVICE_ID_TI_WL1251, + add_quirk, MMC_QUIRK_NONSTD_FUNC_IF), + + SDIO_FIXUP(SDIO_VENDOR_ID_TI_WL1251, SDIO_DEVICE_ID_TI_WL1251, + add_quirk, MMC_QUIRK_DISABLE_CD), + + SDIO_FIXUP(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271, + add_quirk, MMC_QUIRK_NONSTD_FUNC_IF), + + SDIO_FIXUP(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271, + add_quirk, MMC_QUIRK_DISABLE_CD), + + SDIO_FIXUP(SDIO_VENDOR_ID_STE, SDIO_DEVICE_ID_STE_CW1200, + add_quirk, MMC_QUIRK_BROKEN_BYTE_MODE_512), + + SDIO_FIXUP(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8797_F0, + add_quirk, MMC_QUIRK_BROKEN_IRQ_POLLING), + + SDIO_FIXUP(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8887_F0, + add_limit_rate_quirk, 150000000), + + END_FIXUP +}; + +static inline void mmc_fixup_device(struct mmc_card *card, + const struct mmc_fixup *table) +{ + const struct mmc_fixup *f; + u64 rev = cid_rev_card(card); + + for (f = table; f->vendor_fixup; f++) { + if ((f->manfid == CID_MANFID_ANY || + f->manfid == card->cid.manfid) && + (f->oemid == CID_OEMID_ANY || + f->oemid == card->cid.oemid) && + (f->name == CID_NAME_ANY || + !strncmp(f->name, card->cid.prod_name, + sizeof(card->cid.prod_name))) && + (f->cis_vendor == card->cis.vendor || + f->cis_vendor == (u16) SDIO_ANY_ID) && + (f->cis_device == card->cis.device || + f->cis_device == (u16) SDIO_ANY_ID) && + (f->ext_csd_rev == EXT_CSD_REV_ANY || + f->ext_csd_rev == card->ext_csd.rev) && + rev >= f->rev_start && rev <= f->rev_end) { + dev_dbg(&card->dev, "calling %ps\n", f->vendor_fixup); + f->vendor_fixup(card, f->data); + } + } +} diff --git a/drivers/mmc/core/regulator.c b/drivers/mmc/core/regulator.c new file mode 100644 index 000000000..4dcbc2281 --- /dev/null +++ b/drivers/mmc/core/regulator.c @@ -0,0 +1,314 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Helper functions for MMC regulators. + */ + +#include <linux/device.h> +#include <linux/err.h> +#include <linux/log2.h> +#include <linux/regulator/consumer.h> + +#include <linux/mmc/host.h> + +#include "core.h" +#include "host.h" + +#ifdef CONFIG_REGULATOR + +/** + * mmc_ocrbitnum_to_vdd - Convert a OCR bit number to its voltage + * @vdd_bit: OCR bit number + * @min_uV: minimum voltage value (mV) + * @max_uV: maximum voltage value (mV) + * + * This function returns the voltage range according to the provided OCR + * bit number. If conversion is not possible a negative errno value returned. + */ +static int mmc_ocrbitnum_to_vdd(int vdd_bit, int *min_uV, int *max_uV) +{ + int tmp; + + if (!vdd_bit) + return -EINVAL; + + /* + * REVISIT mmc_vddrange_to_ocrmask() may have set some + * bits this regulator doesn't quite support ... don't + * be too picky, most cards and regulators are OK with + * a 0.1V range goof (it's a small error percentage). + */ + tmp = vdd_bit - ilog2(MMC_VDD_165_195); + if (tmp == 0) { + *min_uV = 1650 * 1000; + *max_uV = 1950 * 1000; + } else { + *min_uV = 1900 * 1000 + tmp * 100 * 1000; + *max_uV = *min_uV + 100 * 1000; + } + + return 0; +} + +/** + * mmc_regulator_get_ocrmask - return mask of supported voltages + * @supply: regulator to use + * + * This returns either a negative errno, or a mask of voltages that + * can be provided to MMC/SD/SDIO devices using the specified voltage + * regulator. This would normally be called before registering the + * MMC host adapter. + */ +static int mmc_regulator_get_ocrmask(struct regulator *supply) +{ + int result = 0; + int count; + int i; + int vdd_uV; + int vdd_mV; + + count = regulator_count_voltages(supply); + if (count < 0) + return count; + + for (i = 0; i < count; i++) { + vdd_uV = regulator_list_voltage(supply, i); + if (vdd_uV <= 0) + continue; + + vdd_mV = vdd_uV / 1000; + result |= mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV); + } + + if (!result) { + vdd_uV = regulator_get_voltage(supply); + if (vdd_uV <= 0) + return vdd_uV; + + vdd_mV = vdd_uV / 1000; + result = mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV); + } + + return result; +} + +/** + * mmc_regulator_set_ocr - set regulator to match host->ios voltage + * @mmc: the host to regulate + * @supply: regulator to use + * @vdd_bit: zero for power off, else a bit number (host->ios.vdd) + * + * Returns zero on success, else negative errno. + * + * MMC host drivers may use this to enable or disable a regulator using + * a particular supply voltage. This would normally be called from the + * set_ios() method. + */ +int mmc_regulator_set_ocr(struct mmc_host *mmc, + struct regulator *supply, + unsigned short vdd_bit) +{ + int result = 0; + int min_uV, max_uV; + + if (vdd_bit) { + mmc_ocrbitnum_to_vdd(vdd_bit, &min_uV, &max_uV); + + result = regulator_set_voltage(supply, min_uV, max_uV); + if (result == 0 && !mmc->regulator_enabled) { + result = regulator_enable(supply); + if (!result) + mmc->regulator_enabled = true; + } + } else if (mmc->regulator_enabled) { + result = regulator_disable(supply); + if (result == 0) + mmc->regulator_enabled = false; + } + + if (result) + dev_err(mmc_dev(mmc), + "could not set regulator OCR (%d)\n", result); + return result; +} +EXPORT_SYMBOL_GPL(mmc_regulator_set_ocr); + +static int mmc_regulator_set_voltage_if_supported(struct regulator *regulator, + int min_uV, int target_uV, + int max_uV) +{ + int current_uV; + + /* + * Check if supported first to avoid errors since we may try several + * signal levels during power up and don't want to show errors. + */ + if (!regulator_is_supported_voltage(regulator, min_uV, max_uV)) + return -EINVAL; + + /* + * The voltage is already set, no need to switch. + * Return 1 to indicate that no switch happened. + */ + current_uV = regulator_get_voltage(regulator); + if (current_uV == target_uV) + return 1; + + return regulator_set_voltage_triplet(regulator, min_uV, target_uV, + max_uV); +} + +/** + * mmc_regulator_set_vqmmc - Set VQMMC as per the ios + * @mmc: the host to regulate + * @ios: io bus settings + * + * For 3.3V signaling, we try to match VQMMC to VMMC as closely as possible. + * That will match the behavior of old boards where VQMMC and VMMC were supplied + * by the same supply. The Bus Operating conditions for 3.3V signaling in the + * SD card spec also define VQMMC in terms of VMMC. + * If this is not possible we'll try the full 2.7-3.6V of the spec. + * + * For 1.2V and 1.8V signaling we'll try to get as close as possible to the + * requested voltage. This is definitely a good idea for UHS where there's a + * separate regulator on the card that's trying to make 1.8V and it's best if + * we match. + * + * This function is expected to be used by a controller's + * start_signal_voltage_switch() function. + */ +int mmc_regulator_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct device *dev = mmc_dev(mmc); + int ret, volt, min_uV, max_uV; + + /* If no vqmmc supply then we can't change the voltage */ + if (IS_ERR(mmc->supply.vqmmc)) + return -EINVAL; + + switch (ios->signal_voltage) { + case MMC_SIGNAL_VOLTAGE_120: + return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc, + 1100000, 1200000, 1300000); + case MMC_SIGNAL_VOLTAGE_180: + return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc, + 1700000, 1800000, 1950000); + case MMC_SIGNAL_VOLTAGE_330: + ret = mmc_ocrbitnum_to_vdd(mmc->ios.vdd, &volt, &max_uV); + if (ret < 0) + return ret; + + dev_dbg(dev, "%s: found vmmc voltage range of %d-%duV\n", + __func__, volt, max_uV); + + min_uV = max(volt - 300000, 2700000); + max_uV = min(max_uV + 200000, 3600000); + + /* + * Due to a limitation in the current implementation of + * regulator_set_voltage_triplet() which is taking the lowest + * voltage possible if below the target, search for a suitable + * voltage in two steps and try to stay close to vmmc + * with a 0.3V tolerance at first. + */ + ret = mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc, + min_uV, volt, max_uV); + if (ret >= 0) + return ret; + + return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc, + 2700000, volt, 3600000); + default: + return -EINVAL; + } +} +EXPORT_SYMBOL_GPL(mmc_regulator_set_vqmmc); + +#else + +static inline int mmc_regulator_get_ocrmask(struct regulator *supply) +{ + return 0; +} + +#endif /* CONFIG_REGULATOR */ + +/** + * mmc_regulator_get_supply - try to get VMMC and VQMMC regulators for a host + * @mmc: the host to regulate + * + * Returns 0 or errno. errno should be handled, it is either a critical error + * or -EPROBE_DEFER. 0 means no critical error but it does not mean all + * regulators have been found because they all are optional. If you require + * certain regulators, you need to check separately in your driver if they got + * populated after calling this function. + */ +int mmc_regulator_get_supply(struct mmc_host *mmc) +{ + struct device *dev = mmc_dev(mmc); + int ret; + + mmc->supply.vmmc = devm_regulator_get_optional(dev, "vmmc"); + mmc->supply.vqmmc = devm_regulator_get_optional(dev, "vqmmc"); + + if (IS_ERR(mmc->supply.vmmc)) { + if (PTR_ERR(mmc->supply.vmmc) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_dbg(dev, "No vmmc regulator found\n"); + } else { + ret = mmc_regulator_get_ocrmask(mmc->supply.vmmc); + if (ret > 0) + mmc->ocr_avail = ret; + else + dev_warn(dev, "Failed getting OCR mask: %d\n", ret); + } + + if (IS_ERR(mmc->supply.vqmmc)) { + if (PTR_ERR(mmc->supply.vqmmc) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_dbg(dev, "No vqmmc regulator found\n"); + } + + return 0; +} +EXPORT_SYMBOL_GPL(mmc_regulator_get_supply); + +/** + * mmc_regulator_enable_vqmmc - enable VQMMC regulator for a host + * @mmc: the host to regulate + * + * Returns 0 or errno. Enables the regulator for vqmmc. + * Keeps track of the enable status for ensuring that calls to + * regulator_enable/disable are balanced. + */ +int mmc_regulator_enable_vqmmc(struct mmc_host *mmc) +{ + int ret = 0; + + if (!IS_ERR(mmc->supply.vqmmc) && !mmc->vqmmc_enabled) { + ret = regulator_enable(mmc->supply.vqmmc); + if (ret < 0) + dev_err(mmc_dev(mmc), "enabling vqmmc regulator failed\n"); + else + mmc->vqmmc_enabled = true; + } + + return ret; +} +EXPORT_SYMBOL_GPL(mmc_regulator_enable_vqmmc); + +/** + * mmc_regulator_disable_vqmmc - disable VQMMC regulator for a host + * @mmc: the host to regulate + * + * Returns 0 or errno. Disables the regulator for vqmmc. + * Keeps track of the enable status for ensuring that calls to + * regulator_enable/disable are balanced. + */ +void mmc_regulator_disable_vqmmc(struct mmc_host *mmc) +{ + if (!IS_ERR(mmc->supply.vqmmc) && mmc->vqmmc_enabled) { + regulator_disable(mmc->supply.vqmmc); + mmc->vqmmc_enabled = false; + } +} +EXPORT_SYMBOL_GPL(mmc_regulator_disable_vqmmc); diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c new file mode 100644 index 000000000..868b121ce --- /dev/null +++ b/drivers/mmc/core/sd.c @@ -0,0 +1,1400 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/mmc/core/sd.c + * + * Copyright (C) 2003-2004 Russell King, All Rights Reserved. + * SD support Copyright (C) 2004 Ian Molton, All Rights Reserved. + * Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved. + */ + +#include <linux/err.h> +#include <linux/sizes.h> +#include <linux/slab.h> +#include <linux/stat.h> +#include <linux/pm_runtime.h> + +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sd.h> + +#include "core.h" +#include "card.h" +#include "host.h" +#include "bus.h" +#include "mmc_ops.h" +#include "sd.h" +#include "sd_ops.h" + +static const unsigned int tran_exp[] = { + 10000, 100000, 1000000, 10000000, + 0, 0, 0, 0 +}; + +static const unsigned char tran_mant[] = { + 0, 10, 12, 13, 15, 20, 25, 30, + 35, 40, 45, 50, 55, 60, 70, 80, +}; + +static const unsigned int taac_exp[] = { + 1, 10, 100, 1000, 10000, 100000, 1000000, 10000000, +}; + +static const unsigned int taac_mant[] = { + 0, 10, 12, 13, 15, 20, 25, 30, + 35, 40, 45, 50, 55, 60, 70, 80, +}; + +static const unsigned int sd_au_size[] = { + 0, SZ_16K / 512, SZ_32K / 512, SZ_64K / 512, + SZ_128K / 512, SZ_256K / 512, SZ_512K / 512, SZ_1M / 512, + SZ_2M / 512, SZ_4M / 512, SZ_8M / 512, (SZ_8M + SZ_4M) / 512, + SZ_16M / 512, (SZ_16M + SZ_8M) / 512, SZ_32M / 512, SZ_64M / 512, +}; + +#define UNSTUFF_BITS(resp,start,size) \ + ({ \ + const int __size = size; \ + const u32 __mask = (__size < 32 ? 1 << __size : 0) - 1; \ + const int __off = 3 - ((start) / 32); \ + const int __shft = (start) & 31; \ + u32 __res; \ + \ + __res = resp[__off] >> __shft; \ + if (__size + __shft > 32) \ + __res |= resp[__off-1] << ((32 - __shft) % 32); \ + __res & __mask; \ + }) + +/* + * Given the decoded CSD structure, decode the raw CID to our CID structure. + */ +void mmc_decode_cid(struct mmc_card *card) +{ + u32 *resp = card->raw_cid; + + /* + * SD doesn't currently have a version field so we will + * have to assume we can parse this. + */ + card->cid.manfid = UNSTUFF_BITS(resp, 120, 8); + card->cid.oemid = UNSTUFF_BITS(resp, 104, 16); + card->cid.prod_name[0] = UNSTUFF_BITS(resp, 96, 8); + card->cid.prod_name[1] = UNSTUFF_BITS(resp, 88, 8); + card->cid.prod_name[2] = UNSTUFF_BITS(resp, 80, 8); + card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8); + card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8); + card->cid.hwrev = UNSTUFF_BITS(resp, 60, 4); + card->cid.fwrev = UNSTUFF_BITS(resp, 56, 4); + card->cid.serial = UNSTUFF_BITS(resp, 24, 32); + card->cid.year = UNSTUFF_BITS(resp, 12, 8); + card->cid.month = UNSTUFF_BITS(resp, 8, 4); + + card->cid.year += 2000; /* SD cards year offset */ +} + +/* + * Given a 128-bit response, decode to our card CSD structure. + */ +static int mmc_decode_csd(struct mmc_card *card) +{ + struct mmc_csd *csd = &card->csd; + unsigned int e, m, csd_struct; + u32 *resp = card->raw_csd; + + csd_struct = UNSTUFF_BITS(resp, 126, 2); + + switch (csd_struct) { + case 0: + m = UNSTUFF_BITS(resp, 115, 4); + e = UNSTUFF_BITS(resp, 112, 3); + csd->taac_ns = (taac_exp[e] * taac_mant[m] + 9) / 10; + csd->taac_clks = UNSTUFF_BITS(resp, 104, 8) * 100; + + m = UNSTUFF_BITS(resp, 99, 4); + e = UNSTUFF_BITS(resp, 96, 3); + csd->max_dtr = tran_exp[e] * tran_mant[m]; + csd->cmdclass = UNSTUFF_BITS(resp, 84, 12); + + e = UNSTUFF_BITS(resp, 47, 3); + m = UNSTUFF_BITS(resp, 62, 12); + csd->capacity = (1 + m) << (e + 2); + + csd->read_blkbits = UNSTUFF_BITS(resp, 80, 4); + csd->read_partial = UNSTUFF_BITS(resp, 79, 1); + csd->write_misalign = UNSTUFF_BITS(resp, 78, 1); + csd->read_misalign = UNSTUFF_BITS(resp, 77, 1); + csd->dsr_imp = UNSTUFF_BITS(resp, 76, 1); + csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3); + csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4); + csd->write_partial = UNSTUFF_BITS(resp, 21, 1); + + if (UNSTUFF_BITS(resp, 46, 1)) { + csd->erase_size = 1; + } else if (csd->write_blkbits >= 9) { + csd->erase_size = UNSTUFF_BITS(resp, 39, 7) + 1; + csd->erase_size <<= csd->write_blkbits - 9; + } + + if (UNSTUFF_BITS(resp, 13, 1)) + mmc_card_set_readonly(card); + break; + case 1: + /* + * This is a block-addressed SDHC or SDXC card. Most + * interesting fields are unused and have fixed + * values. To avoid getting tripped by buggy cards, + * we assume those fixed values ourselves. + */ + mmc_card_set_blockaddr(card); + + csd->taac_ns = 0; /* Unused */ + csd->taac_clks = 0; /* Unused */ + + m = UNSTUFF_BITS(resp, 99, 4); + e = UNSTUFF_BITS(resp, 96, 3); + csd->max_dtr = tran_exp[e] * tran_mant[m]; + csd->cmdclass = UNSTUFF_BITS(resp, 84, 12); + csd->c_size = UNSTUFF_BITS(resp, 48, 22); + + /* SDXC cards have a minimum C_SIZE of 0x00FFFF */ + if (csd->c_size >= 0xFFFF) + mmc_card_set_ext_capacity(card); + + m = UNSTUFF_BITS(resp, 48, 22); + csd->capacity = (1 + m) << 10; + + csd->read_blkbits = 9; + csd->read_partial = 0; + csd->write_misalign = 0; + csd->read_misalign = 0; + csd->r2w_factor = 4; /* Unused */ + csd->write_blkbits = 9; + csd->write_partial = 0; + csd->erase_size = 1; + + if (UNSTUFF_BITS(resp, 13, 1)) + mmc_card_set_readonly(card); + break; + default: + pr_err("%s: unrecognised CSD structure version %d\n", + mmc_hostname(card->host), csd_struct); + return -EINVAL; + } + + card->erase_size = csd->erase_size; + + return 0; +} + +/* + * Given a 64-bit response, decode to our card SCR structure. + */ +static int mmc_decode_scr(struct mmc_card *card) +{ + struct sd_scr *scr = &card->scr; + unsigned int scr_struct; + u32 resp[4]; + + resp[3] = card->raw_scr[1]; + resp[2] = card->raw_scr[0]; + + scr_struct = UNSTUFF_BITS(resp, 60, 4); + if (scr_struct != 0) { + pr_err("%s: unrecognised SCR structure version %d\n", + mmc_hostname(card->host), scr_struct); + return -EINVAL; + } + + scr->sda_vsn = UNSTUFF_BITS(resp, 56, 4); + scr->bus_widths = UNSTUFF_BITS(resp, 48, 4); + if (scr->sda_vsn == SCR_SPEC_VER_2) + /* Check if Physical Layer Spec v3.0 is supported */ + scr->sda_spec3 = UNSTUFF_BITS(resp, 47, 1); + + if (scr->sda_spec3) { + scr->sda_spec4 = UNSTUFF_BITS(resp, 42, 1); + scr->sda_specx = UNSTUFF_BITS(resp, 38, 4); + } + + if (UNSTUFF_BITS(resp, 55, 1)) + card->erased_byte = 0xFF; + else + card->erased_byte = 0x0; + + if (scr->sda_spec3) + scr->cmds = UNSTUFF_BITS(resp, 32, 2); + + /* SD Spec says: any SD Card shall set at least bits 0 and 2 */ + if (!(scr->bus_widths & SD_SCR_BUS_WIDTH_1) || + !(scr->bus_widths & SD_SCR_BUS_WIDTH_4)) { + pr_err("%s: invalid bus width\n", mmc_hostname(card->host)); + return -EINVAL; + } + + return 0; +} + +/* + * Fetch and process SD Status register. + */ +static int mmc_read_ssr(struct mmc_card *card) +{ + unsigned int au, es, et, eo; + __be32 *raw_ssr; + u32 resp[4] = {}; + u8 discard_support; + int i; + + if (!(card->csd.cmdclass & CCC_APP_SPEC)) { + pr_warn("%s: card lacks mandatory SD Status function\n", + mmc_hostname(card->host)); + return 0; + } + + raw_ssr = kmalloc(sizeof(card->raw_ssr), GFP_KERNEL); + if (!raw_ssr) + return -ENOMEM; + + if (mmc_app_sd_status(card, raw_ssr)) { + pr_warn("%s: problem reading SD Status register\n", + mmc_hostname(card->host)); + kfree(raw_ssr); + return 0; + } + + for (i = 0; i < 16; i++) + card->raw_ssr[i] = be32_to_cpu(raw_ssr[i]); + + kfree(raw_ssr); + + /* + * UNSTUFF_BITS only works with four u32s so we have to offset the + * bitfield positions accordingly. + */ + au = UNSTUFF_BITS(card->raw_ssr, 428 - 384, 4); + if (au) { + if (au <= 9 || card->scr.sda_spec3) { + card->ssr.au = sd_au_size[au]; + es = UNSTUFF_BITS(card->raw_ssr, 408 - 384, 16); + et = UNSTUFF_BITS(card->raw_ssr, 402 - 384, 6); + if (es && et) { + eo = UNSTUFF_BITS(card->raw_ssr, 400 - 384, 2); + card->ssr.erase_timeout = (et * 1000) / es; + card->ssr.erase_offset = eo * 1000; + } + } else { + pr_warn("%s: SD Status: Invalid Allocation Unit size\n", + mmc_hostname(card->host)); + } + } + + /* + * starting SD5.1 discard is supported if DISCARD_SUPPORT (b313) is set + */ + resp[3] = card->raw_ssr[6]; + discard_support = UNSTUFF_BITS(resp, 313 - 288, 1); + card->erase_arg = (card->scr.sda_specx && discard_support) ? + SD_DISCARD_ARG : SD_ERASE_ARG; + + return 0; +} + +/* + * Fetches and decodes switch information + */ +static int mmc_read_switch(struct mmc_card *card) +{ + int err; + u8 *status; + + if (card->scr.sda_vsn < SCR_SPEC_VER_1) + return 0; + + if (!(card->csd.cmdclass & CCC_SWITCH)) { + pr_warn("%s: card lacks mandatory switch function, performance might suffer\n", + mmc_hostname(card->host)); + return 0; + } + + status = kmalloc(64, GFP_KERNEL); + if (!status) + return -ENOMEM; + + /* + * Find out the card's support bits with a mode 0 operation. + * The argument does not matter, as the support bits do not + * change with the arguments. + */ + err = mmc_sd_switch(card, 0, 0, 0, status); + if (err) { + /* + * If the host or the card can't do the switch, + * fail more gracefully. + */ + if (err != -EINVAL && err != -ENOSYS && err != -EFAULT) + goto out; + + pr_warn("%s: problem reading Bus Speed modes\n", + mmc_hostname(card->host)); + err = 0; + + goto out; + } + + if (status[13] & SD_MODE_HIGH_SPEED) + card->sw_caps.hs_max_dtr = HIGH_SPEED_MAX_DTR; + + if (card->scr.sda_spec3) { + card->sw_caps.sd3_bus_mode = status[13]; + /* Driver Strengths supported by the card */ + card->sw_caps.sd3_drv_type = status[9]; + card->sw_caps.sd3_curr_limit = status[7] | status[6] << 8; + } + +out: + kfree(status); + + return err; +} + +/* + * Test if the card supports high-speed mode and, if so, switch to it. + */ +int mmc_sd_switch_hs(struct mmc_card *card) +{ + int err; + u8 *status; + + if (card->scr.sda_vsn < SCR_SPEC_VER_1) + return 0; + + if (!(card->csd.cmdclass & CCC_SWITCH)) + return 0; + + if (!(card->host->caps & MMC_CAP_SD_HIGHSPEED)) + return 0; + + if (card->sw_caps.hs_max_dtr == 0) + return 0; + + status = kmalloc(64, GFP_KERNEL); + if (!status) + return -ENOMEM; + + err = mmc_sd_switch(card, 1, 0, HIGH_SPEED_BUS_SPEED, status); + if (err) + goto out; + + if ((status[16] & 0xF) != HIGH_SPEED_BUS_SPEED) { + pr_warn("%s: Problem switching card into high-speed mode!\n", + mmc_hostname(card->host)); + err = 0; + } else { + err = 1; + } + +out: + kfree(status); + + return err; +} + +static int sd_select_driver_type(struct mmc_card *card, u8 *status) +{ + int card_drv_type, drive_strength, drv_type; + int err; + + card->drive_strength = 0; + + card_drv_type = card->sw_caps.sd3_drv_type | SD_DRIVER_TYPE_B; + + drive_strength = mmc_select_drive_strength(card, + card->sw_caps.uhs_max_dtr, + card_drv_type, &drv_type); + + if (drive_strength) { + err = mmc_sd_switch(card, 1, 2, drive_strength, status); + if (err) + return err; + if ((status[15] & 0xF) != drive_strength) { + pr_warn("%s: Problem setting drive strength!\n", + mmc_hostname(card->host)); + return 0; + } + card->drive_strength = drive_strength; + } + + if (drv_type) + mmc_set_driver_type(card->host, drv_type); + + return 0; +} + +static void sd_update_bus_speed_mode(struct mmc_card *card) +{ + /* + * If the host doesn't support any of the UHS-I modes, fallback on + * default speed. + */ + if (!mmc_host_uhs(card->host)) { + card->sd_bus_speed = 0; + return; + } + + if ((card->host->caps & MMC_CAP_UHS_SDR104) && + (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104)) { + card->sd_bus_speed = UHS_SDR104_BUS_SPEED; + } else if ((card->host->caps & MMC_CAP_UHS_DDR50) && + (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_DDR50)) { + card->sd_bus_speed = UHS_DDR50_BUS_SPEED; + } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_SDR50)) && (card->sw_caps.sd3_bus_mode & + SD_MODE_UHS_SDR50)) { + card->sd_bus_speed = UHS_SDR50_BUS_SPEED; + } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25)) && + (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR25)) { + card->sd_bus_speed = UHS_SDR25_BUS_SPEED; + } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25 | + MMC_CAP_UHS_SDR12)) && (card->sw_caps.sd3_bus_mode & + SD_MODE_UHS_SDR12)) { + card->sd_bus_speed = UHS_SDR12_BUS_SPEED; + } +} + +static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status) +{ + int err; + unsigned int timing = 0; + + switch (card->sd_bus_speed) { + case UHS_SDR104_BUS_SPEED: + timing = MMC_TIMING_UHS_SDR104; + card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR; + break; + case UHS_DDR50_BUS_SPEED: + timing = MMC_TIMING_UHS_DDR50; + card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR; + break; + case UHS_SDR50_BUS_SPEED: + timing = MMC_TIMING_UHS_SDR50; + card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR; + break; + case UHS_SDR25_BUS_SPEED: + timing = MMC_TIMING_UHS_SDR25; + card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR; + break; + case UHS_SDR12_BUS_SPEED: + timing = MMC_TIMING_UHS_SDR12; + card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR; + break; + default: + return 0; + } + + err = mmc_sd_switch(card, 1, 0, card->sd_bus_speed, status); + if (err) + return err; + + if ((status[16] & 0xF) != card->sd_bus_speed) + pr_warn("%s: Problem setting bus speed mode!\n", + mmc_hostname(card->host)); + else { + mmc_set_timing(card->host, timing); + mmc_set_clock(card->host, card->sw_caps.uhs_max_dtr); + } + + return 0; +} + +/* Get host's max current setting at its current voltage */ +static u32 sd_get_host_max_current(struct mmc_host *host) +{ + u32 voltage, max_current; + + voltage = 1 << host->ios.vdd; + switch (voltage) { + case MMC_VDD_165_195: + max_current = host->max_current_180; + break; + case MMC_VDD_29_30: + case MMC_VDD_30_31: + max_current = host->max_current_300; + break; + case MMC_VDD_32_33: + case MMC_VDD_33_34: + max_current = host->max_current_330; + break; + default: + max_current = 0; + } + + return max_current; +} + +static int sd_set_current_limit(struct mmc_card *card, u8 *status) +{ + int current_limit = SD_SET_CURRENT_NO_CHANGE; + int err; + u32 max_current; + + /* + * Current limit switch is only defined for SDR50, SDR104, and DDR50 + * bus speed modes. For other bus speed modes, we do not change the + * current limit. + */ + if ((card->sd_bus_speed != UHS_SDR50_BUS_SPEED) && + (card->sd_bus_speed != UHS_SDR104_BUS_SPEED) && + (card->sd_bus_speed != UHS_DDR50_BUS_SPEED)) + return 0; + + /* + * Host has different current capabilities when operating at + * different voltages, so find out its max current first. + */ + max_current = sd_get_host_max_current(card->host); + + /* + * We only check host's capability here, if we set a limit that is + * higher than the card's maximum current, the card will be using its + * maximum current, e.g. if the card's maximum current is 300ma, and + * when we set current limit to 200ma, the card will draw 200ma, and + * when we set current limit to 400/600/800ma, the card will draw its + * maximum 300ma from the host. + * + * The above is incorrect: if we try to set a current limit that is + * not supported by the card, the card can rightfully error out the + * attempt, and remain at the default current limit. This results + * in a 300mA card being limited to 200mA even though the host + * supports 800mA. Failures seen with SanDisk 8GB UHS cards with + * an iMX6 host. --rmk + */ + if (max_current >= 800 && + card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_800) + current_limit = SD_SET_CURRENT_LIMIT_800; + else if (max_current >= 600 && + card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_600) + current_limit = SD_SET_CURRENT_LIMIT_600; + else if (max_current >= 400 && + card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_400) + current_limit = SD_SET_CURRENT_LIMIT_400; + else if (max_current >= 200 && + card->sw_caps.sd3_curr_limit & SD_MAX_CURRENT_200) + current_limit = SD_SET_CURRENT_LIMIT_200; + + if (current_limit != SD_SET_CURRENT_NO_CHANGE) { + err = mmc_sd_switch(card, 1, 3, current_limit, status); + if (err) + return err; + + if (((status[15] >> 4) & 0x0F) != current_limit) + pr_warn("%s: Problem setting current limit!\n", + mmc_hostname(card->host)); + + } + + return 0; +} + +/* + * UHS-I specific initialization procedure + */ +static int mmc_sd_init_uhs_card(struct mmc_card *card) +{ + int err; + u8 *status; + + if (!(card->csd.cmdclass & CCC_SWITCH)) + return 0; + + status = kmalloc(64, GFP_KERNEL); + if (!status) + return -ENOMEM; + + /* Set 4-bit bus width */ + err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4); + if (err) + goto out; + + mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4); + + /* + * Select the bus speed mode depending on host + * and card capability. + */ + sd_update_bus_speed_mode(card); + + /* Set the driver strength for the card */ + err = sd_select_driver_type(card, status); + if (err) + goto out; + + /* Set current limit for the card */ + err = sd_set_current_limit(card, status); + if (err) + goto out; + + /* Set bus speed mode of the card */ + err = sd_set_bus_speed_mode(card, status); + if (err) + goto out; + + /* + * SPI mode doesn't define CMD19 and tuning is only valid for SDR50 and + * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104. + */ + if (!mmc_host_is_spi(card->host) && + (card->host->ios.timing == MMC_TIMING_UHS_SDR50 || + card->host->ios.timing == MMC_TIMING_UHS_DDR50 || + card->host->ios.timing == MMC_TIMING_UHS_SDR104)) { + err = mmc_execute_tuning(card); + + /* + * As SD Specifications Part1 Physical Layer Specification + * Version 3.01 says, CMD19 tuning is available for unlocked + * cards in transfer state of 1.8V signaling mode. The small + * difference between v3.00 and 3.01 spec means that CMD19 + * tuning is also available for DDR50 mode. + */ + if (err && card->host->ios.timing == MMC_TIMING_UHS_DDR50) { + pr_warn("%s: ddr50 tuning failed\n", + mmc_hostname(card->host)); + err = 0; + } + } + +out: + kfree(status); + + return err; +} + +MMC_DEV_ATTR(cid, "%08x%08x%08x%08x\n", card->raw_cid[0], card->raw_cid[1], + card->raw_cid[2], card->raw_cid[3]); +MMC_DEV_ATTR(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1], + card->raw_csd[2], card->raw_csd[3]); +MMC_DEV_ATTR(scr, "%08x%08x\n", card->raw_scr[0], card->raw_scr[1]); +MMC_DEV_ATTR(ssr, + "%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x%08x\n", + card->raw_ssr[0], card->raw_ssr[1], card->raw_ssr[2], + card->raw_ssr[3], card->raw_ssr[4], card->raw_ssr[5], + card->raw_ssr[6], card->raw_ssr[7], card->raw_ssr[8], + card->raw_ssr[9], card->raw_ssr[10], card->raw_ssr[11], + card->raw_ssr[12], card->raw_ssr[13], card->raw_ssr[14], + card->raw_ssr[15]); +MMC_DEV_ATTR(date, "%02d/%04d\n", card->cid.month, card->cid.year); +MMC_DEV_ATTR(erase_size, "%u\n", card->erase_size << 9); +MMC_DEV_ATTR(preferred_erase_size, "%u\n", card->pref_erase << 9); +MMC_DEV_ATTR(fwrev, "0x%x\n", card->cid.fwrev); +MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev); +MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid); +MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name); +MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid); +MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial); +MMC_DEV_ATTR(ocr, "0x%08x\n", card->ocr); +MMC_DEV_ATTR(rca, "0x%04x\n", card->rca); + + +static ssize_t mmc_dsr_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct mmc_card *card = mmc_dev_to_card(dev); + struct mmc_host *host = card->host; + + if (card->csd.dsr_imp && host->dsr_req) + return sprintf(buf, "0x%x\n", host->dsr); + else + /* return default DSR value */ + return sprintf(buf, "0x%x\n", 0x404); +} + +static DEVICE_ATTR(dsr, S_IRUGO, mmc_dsr_show, NULL); + +MMC_DEV_ATTR(vendor, "0x%04x\n", card->cis.vendor); +MMC_DEV_ATTR(device, "0x%04x\n", card->cis.device); +MMC_DEV_ATTR(revision, "%u.%u\n", card->major_rev, card->minor_rev); + +#define sdio_info_attr(num) \ +static ssize_t info##num##_show(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct mmc_card *card = mmc_dev_to_card(dev); \ + \ + if (num > card->num_info) \ + return -ENODATA; \ + if (!card->info[num-1][0]) \ + return 0; \ + return sprintf(buf, "%s\n", card->info[num-1]); \ +} \ +static DEVICE_ATTR_RO(info##num) + +sdio_info_attr(1); +sdio_info_attr(2); +sdio_info_attr(3); +sdio_info_attr(4); + +static struct attribute *sd_std_attrs[] = { + &dev_attr_vendor.attr, + &dev_attr_device.attr, + &dev_attr_revision.attr, + &dev_attr_info1.attr, + &dev_attr_info2.attr, + &dev_attr_info3.attr, + &dev_attr_info4.attr, + &dev_attr_cid.attr, + &dev_attr_csd.attr, + &dev_attr_scr.attr, + &dev_attr_ssr.attr, + &dev_attr_date.attr, + &dev_attr_erase_size.attr, + &dev_attr_preferred_erase_size.attr, + &dev_attr_fwrev.attr, + &dev_attr_hwrev.attr, + &dev_attr_manfid.attr, + &dev_attr_name.attr, + &dev_attr_oemid.attr, + &dev_attr_serial.attr, + &dev_attr_ocr.attr, + &dev_attr_rca.attr, + &dev_attr_dsr.attr, + NULL, +}; + +static umode_t sd_std_is_visible(struct kobject *kobj, struct attribute *attr, + int index) +{ + struct device *dev = kobj_to_dev(kobj); + struct mmc_card *card = mmc_dev_to_card(dev); + + /* CIS vendor and device ids, revision and info string are available only for Combo cards */ + if ((attr == &dev_attr_vendor.attr || + attr == &dev_attr_device.attr || + attr == &dev_attr_revision.attr || + attr == &dev_attr_info1.attr || + attr == &dev_attr_info2.attr || + attr == &dev_attr_info3.attr || + attr == &dev_attr_info4.attr + ) && card->type != MMC_TYPE_SD_COMBO) + return 0; + + return attr->mode; +} + +static const struct attribute_group sd_std_group = { + .attrs = sd_std_attrs, + .is_visible = sd_std_is_visible, +}; +__ATTRIBUTE_GROUPS(sd_std); + +struct device_type sd_type = { + .groups = sd_std_groups, +}; + +/* + * Fetch CID from card. + */ +int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr) +{ + int err; + u32 max_current; + int retries = 10; + u32 pocr = ocr; + +try_again: + if (!retries) { + ocr &= ~SD_OCR_S18R; + pr_warn("%s: Skipping voltage switch\n", mmc_hostname(host)); + } + + /* + * Since we're changing the OCR value, we seem to + * need to tell some cards to go back to the idle + * state. We wait 1ms to give cards time to + * respond. + */ + mmc_go_idle(host); + + /* + * If SD_SEND_IF_COND indicates an SD 2.0 + * compliant card and we should set bit 30 + * of the ocr to indicate that we can handle + * block-addressed SDHC cards. + */ + err = mmc_send_if_cond(host, ocr); + if (!err) + ocr |= SD_OCR_CCS; + + /* + * If the host supports one of UHS-I modes, request the card + * to switch to 1.8V signaling level. If the card has failed + * repeatedly to switch however, skip this. + */ + if (retries && mmc_host_uhs(host)) + ocr |= SD_OCR_S18R; + + /* + * If the host can supply more than 150mA at current voltage, + * XPC should be set to 1. + */ + max_current = sd_get_host_max_current(host); + if (max_current > 150) + ocr |= SD_OCR_XPC; + + err = mmc_send_app_op_cond(host, ocr, rocr); + if (err) + return err; + + /* + * In case the S18A bit is set in the response, let's start the signal + * voltage switch procedure. SPI mode doesn't support CMD11. + * Note that, according to the spec, the S18A bit is not valid unless + * the CCS bit is set as well. We deliberately deviate from the spec in + * regards to this, which allows UHS-I to be supported for SDSC cards. + */ + if (!mmc_host_is_spi(host) && (ocr & SD_OCR_S18R) && + rocr && (*rocr & SD_ROCR_S18A)) { + err = mmc_set_uhs_voltage(host, pocr); + if (err == -EAGAIN) { + retries--; + goto try_again; + } else if (err) { + retries = 0; + goto try_again; + } + } + + err = mmc_send_cid(host, cid); + return err; +} + +int mmc_sd_get_csd(struct mmc_host *host, struct mmc_card *card) +{ + int err; + + /* + * Fetch CSD from card. + */ + err = mmc_send_csd(card, card->raw_csd); + if (err) + return err; + + err = mmc_decode_csd(card); + if (err) + return err; + + return 0; +} + +static int mmc_sd_get_ro(struct mmc_host *host) +{ + int ro; + + /* + * Some systems don't feature a write-protect pin and don't need one. + * E.g. because they only have micro-SD card slot. For those systems + * assume that the SD card is always read-write. + */ + if (host->caps2 & MMC_CAP2_NO_WRITE_PROTECT) + return 0; + + if (!host->ops->get_ro) + return -1; + + ro = host->ops->get_ro(host); + + return ro; +} + +int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card, + bool reinit) +{ + int err; + + if (!reinit) { + /* + * Fetch SCR from card. + */ + err = mmc_app_send_scr(card); + if (err) + return err; + + err = mmc_decode_scr(card); + if (err) + return err; + + /* + * Fetch and process SD Status register. + */ + err = mmc_read_ssr(card); + if (err) + return err; + + /* Erase init depends on CSD and SSR */ + mmc_init_erase(card); + } + + /* + * Fetch switch information from card. Note, sd3_bus_mode can change if + * voltage switch outcome changes, so do this always. + */ + err = mmc_read_switch(card); + if (err) + return err; + + /* + * For SPI, enable CRC as appropriate. + * This CRC enable is located AFTER the reading of the + * card registers because some SDHC cards are not able + * to provide valid CRCs for non-512-byte blocks. + */ + if (mmc_host_is_spi(host)) { + err = mmc_spi_set_crc(host, use_spi_crc); + if (err) + return err; + } + + /* + * Check if read-only switch is active. + */ + if (!reinit) { + int ro = mmc_sd_get_ro(host); + + if (ro < 0) { + pr_warn("%s: host does not support reading read-only switch, assuming write-enable\n", + mmc_hostname(host)); + } else if (ro > 0) { + mmc_card_set_readonly(card); + } + } + + return 0; +} + +unsigned mmc_sd_get_max_clock(struct mmc_card *card) +{ + unsigned max_dtr = (unsigned int)-1; + + if (mmc_card_hs(card)) { + if (max_dtr > card->sw_caps.hs_max_dtr) + max_dtr = card->sw_caps.hs_max_dtr; + } else if (max_dtr > card->csd.max_dtr) { + max_dtr = card->csd.max_dtr; + } + + return max_dtr; +} + +static bool mmc_sd_card_using_v18(struct mmc_card *card) +{ + /* + * According to the SD spec., the Bus Speed Mode (function group 1) bits + * 2 to 4 are zero if the card is initialized at 3.3V signal level. Thus + * they can be used to determine if the card has already switched to + * 1.8V signaling. + */ + return card->sw_caps.sd3_bus_mode & + (SD_MODE_UHS_SDR50 | SD_MODE_UHS_SDR104 | SD_MODE_UHS_DDR50); +} + +/* + * Handle the detection and initialisation of a card. + * + * In the case of a resume, "oldcard" will contain the card + * we're trying to reinitialise. + */ +static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, + struct mmc_card *oldcard) +{ + struct mmc_card *card; + int err; + u32 cid[4]; + u32 rocr = 0; + bool v18_fixup_failed = false; + + WARN_ON(!host->claimed); +retry: + err = mmc_sd_get_cid(host, ocr, cid, &rocr); + if (err) + return err; + + if (oldcard) { + if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0) { + pr_debug("%s: Perhaps the card was replaced\n", + mmc_hostname(host)); + return -ENOENT; + } + + card = oldcard; + } else { + /* + * Allocate card structure. + */ + card = mmc_alloc_card(host, &sd_type); + if (IS_ERR(card)) + return PTR_ERR(card); + + card->ocr = ocr; + card->type = MMC_TYPE_SD; + memcpy(card->raw_cid, cid, sizeof(card->raw_cid)); + } + + /* + * Call the optional HC's init_card function to handle quirks. + */ + if (host->ops->init_card) + host->ops->init_card(host, card); + + /* + * For native busses: get card RCA and quit open drain mode. + */ + if (!mmc_host_is_spi(host)) { + err = mmc_send_relative_addr(host, &card->rca); + if (err) + goto free_card; + } + + if (!oldcard) { + err = mmc_sd_get_csd(host, card); + if (err) + goto free_card; + + mmc_decode_cid(card); + } + + /* + * handling only for cards supporting DSR and hosts requesting + * DSR configuration + */ + if (card->csd.dsr_imp && host->dsr_req) + mmc_set_dsr(host); + + /* + * Select card, as all following commands rely on that. + */ + if (!mmc_host_is_spi(host)) { + err = mmc_select_card(card); + if (err) + goto free_card; + } + + err = mmc_sd_setup_card(host, card, oldcard != NULL); + if (err) + goto free_card; + + /* + * If the card has not been power cycled, it may still be using 1.8V + * signaling. Detect that situation and try to initialize a UHS-I (1.8V) + * transfer mode. + */ + if (!v18_fixup_failed && !mmc_host_is_spi(host) && mmc_host_uhs(host) && + mmc_sd_card_using_v18(card) && + host->ios.signal_voltage != MMC_SIGNAL_VOLTAGE_180) { + if (mmc_host_set_uhs_voltage(host) || + mmc_sd_init_uhs_card(card)) { + v18_fixup_failed = true; + mmc_power_cycle(host, ocr); + if (!oldcard) + mmc_remove_card(card); + goto retry; + } + goto cont; + } + + /* Initialization sequence for UHS-I cards */ + if (rocr & SD_ROCR_S18A && mmc_host_uhs(host)) { + err = mmc_sd_init_uhs_card(card); + if (err) + goto free_card; + } else { + /* + * Attempt to change to high-speed (if supported) + */ + err = mmc_sd_switch_hs(card); + if (err > 0) + mmc_set_timing(card->host, MMC_TIMING_SD_HS); + else if (err) + goto free_card; + + /* + * Set bus speed. + */ + mmc_set_clock(host, mmc_sd_get_max_clock(card)); + + /* + * Switch to wider bus (if supported). + */ + if ((host->caps & MMC_CAP_4_BIT_DATA) && + (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) { + err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4); + if (err) + goto free_card; + + mmc_set_bus_width(host, MMC_BUS_WIDTH_4); + } + } +cont: + if (host->cqe_ops && !host->cqe_enabled) { + err = host->cqe_ops->cqe_enable(host, card); + if (!err) { + host->cqe_enabled = true; + host->hsq_enabled = true; + pr_info("%s: Host Software Queue enabled\n", + mmc_hostname(host)); + } + } + + if (host->caps2 & MMC_CAP2_AVOID_3_3V && + host->ios.signal_voltage == MMC_SIGNAL_VOLTAGE_330) { + pr_err("%s: Host failed to negotiate down from 3.3V\n", + mmc_hostname(host)); + err = -EINVAL; + goto free_card; + } + + host->card = card; + return 0; + +free_card: + if (!oldcard) + mmc_remove_card(card); + + return err; +} + +/* + * Host is being removed. Free up the current card. + */ +static void mmc_sd_remove(struct mmc_host *host) +{ + mmc_remove_card(host->card); + host->card = NULL; +} + +/* + * Card detection - card is alive. + */ +static int mmc_sd_alive(struct mmc_host *host) +{ + return mmc_send_status(host->card, NULL); +} + +/* + * Card detection callback from host. + */ +static void mmc_sd_detect(struct mmc_host *host) +{ + int err; + + mmc_get_card(host->card, NULL); + + /* + * Just check if our card has been removed. + */ + err = _mmc_detect_card_removed(host); + + mmc_put_card(host->card, NULL); + + if (err) { + mmc_sd_remove(host); + + mmc_claim_host(host); + mmc_detach_bus(host); + mmc_power_off(host); + mmc_release_host(host); + } +} + +static int _mmc_sd_suspend(struct mmc_host *host) +{ + int err = 0; + + mmc_claim_host(host); + + if (mmc_card_suspended(host->card)) + goto out; + + if (!mmc_host_is_spi(host)) + err = mmc_deselect_cards(host); + + if (!err) { + mmc_power_off(host); + mmc_card_set_suspended(host->card); + } + +out: + mmc_release_host(host); + return err; +} + +/* + * Callback for suspend + */ +static int mmc_sd_suspend(struct mmc_host *host) +{ + int err; + + err = _mmc_sd_suspend(host); + if (!err) { + pm_runtime_disable(&host->card->dev); + pm_runtime_set_suspended(&host->card->dev); + } + + return err; +} + +/* + * This function tries to determine if the same card is still present + * and, if so, restore all state to it. + */ +static int _mmc_sd_resume(struct mmc_host *host) +{ + int err = 0; + + mmc_claim_host(host); + + if (!mmc_card_suspended(host->card)) + goto out; + + mmc_power_up(host, host->card->ocr); + err = mmc_sd_init_card(host, host->card->ocr, host->card); + mmc_card_clr_suspended(host->card); + +out: + mmc_release_host(host); + return err; +} + +/* + * Callback for resume + */ +static int mmc_sd_resume(struct mmc_host *host) +{ + pm_runtime_enable(&host->card->dev); + return 0; +} + +/* + * Callback for runtime_suspend. + */ +static int mmc_sd_runtime_suspend(struct mmc_host *host) +{ + int err; + + if (!(host->caps & MMC_CAP_AGGRESSIVE_PM)) + return 0; + + err = _mmc_sd_suspend(host); + if (err) + pr_err("%s: error %d doing aggressive suspend\n", + mmc_hostname(host), err); + + return err; +} + +/* + * Callback for runtime_resume. + */ +static int mmc_sd_runtime_resume(struct mmc_host *host) +{ + int err; + + err = _mmc_sd_resume(host); + if (err && err != -ENOMEDIUM) + pr_err("%s: error %d doing runtime resume\n", + mmc_hostname(host), err); + + return 0; +} + +static int mmc_sd_hw_reset(struct mmc_host *host) +{ + mmc_power_cycle(host, host->card->ocr); + return mmc_sd_init_card(host, host->card->ocr, host->card); +} + +static const struct mmc_bus_ops mmc_sd_ops = { + .remove = mmc_sd_remove, + .detect = mmc_sd_detect, + .runtime_suspend = mmc_sd_runtime_suspend, + .runtime_resume = mmc_sd_runtime_resume, + .suspend = mmc_sd_suspend, + .resume = mmc_sd_resume, + .alive = mmc_sd_alive, + .shutdown = mmc_sd_suspend, + .hw_reset = mmc_sd_hw_reset, +}; + +/* + * Starting point for SD card init. + */ +int mmc_attach_sd(struct mmc_host *host) +{ + int err; + u32 ocr, rocr; + + WARN_ON(!host->claimed); + + err = mmc_send_app_op_cond(host, 0, &ocr); + if (err) + return err; + + mmc_attach_bus(host, &mmc_sd_ops); + if (host->ocr_avail_sd) + host->ocr_avail = host->ocr_avail_sd; + + /* + * We need to get OCR a different way for SPI. + */ + if (mmc_host_is_spi(host)) { + mmc_go_idle(host); + + err = mmc_spi_read_ocr(host, 0, &ocr); + if (err) + goto err; + } + + /* + * Some SD cards claims an out of spec VDD voltage range. Let's treat + * these bits as being in-valid and especially also bit7. + */ + ocr &= ~0x7FFF; + + rocr = mmc_select_voltage(host, ocr); + + /* + * Can we support the voltage(s) of the card(s)? + */ + if (!rocr) { + err = -EINVAL; + goto err; + } + + /* + * Detect and init the card. + */ + err = mmc_sd_init_card(host, rocr, NULL); + if (err) + goto err; + + mmc_release_host(host); + err = mmc_add_card(host->card); + if (err) + goto remove_card; + + mmc_claim_host(host); + return 0; + +remove_card: + mmc_remove_card(host->card); + host->card = NULL; + mmc_claim_host(host); +err: + mmc_detach_bus(host); + + pr_err("%s: error %d whilst initialising SD card\n", + mmc_hostname(host), err); + + return err; +} diff --git a/drivers/mmc/core/sd.h b/drivers/mmc/core/sd.h new file mode 100644 index 000000000..497c026a5 --- /dev/null +++ b/drivers/mmc/core/sd.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _MMC_CORE_SD_H +#define _MMC_CORE_SD_H + +#include <linux/types.h> + +extern struct device_type sd_type; + +struct mmc_host; +struct mmc_card; + +int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr); +int mmc_sd_get_csd(struct mmc_host *host, struct mmc_card *card); +void mmc_decode_cid(struct mmc_card *card); +int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card, + bool reinit); +unsigned mmc_sd_get_max_clock(struct mmc_card *card); +int mmc_sd_switch_hs(struct mmc_card *card); + +#endif diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c new file mode 100644 index 000000000..22bf52829 --- /dev/null +++ b/drivers/mmc/core/sd_ops.c @@ -0,0 +1,345 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * linux/drivers/mmc/core/sd_ops.h + * + * Copyright 2006-2007 Pierre Ossman + */ + +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/export.h> +#include <linux/scatterlist.h> + +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sd.h> + +#include "core.h" +#include "sd_ops.h" + +int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card) +{ + int err; + struct mmc_command cmd = {}; + + if (WARN_ON(card && card->host != host)) + return -EINVAL; + + cmd.opcode = MMC_APP_CMD; + + if (card) { + cmd.arg = card->rca << 16; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; + } else { + cmd.arg = 0; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_BCR; + } + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) + return err; + + /* Check that card supported application commands */ + if (!mmc_host_is_spi(host) && !(cmd.resp[0] & R1_APP_CMD)) + return -EOPNOTSUPP; + + return 0; +} +EXPORT_SYMBOL_GPL(mmc_app_cmd); + +static int mmc_wait_for_app_cmd(struct mmc_host *host, struct mmc_card *card, + struct mmc_command *cmd) +{ + struct mmc_request mrq = {}; + int i, err = -EIO; + + /* + * We have to resend MMC_APP_CMD for each attempt so + * we cannot use the retries field in mmc_command. + */ + for (i = 0; i <= MMC_CMD_RETRIES; i++) { + err = mmc_app_cmd(host, card); + if (err) { + /* no point in retrying; no APP commands allowed */ + if (mmc_host_is_spi(host)) { + if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND) + break; + } + continue; + } + + memset(&mrq, 0, sizeof(struct mmc_request)); + + memset(cmd->resp, 0, sizeof(cmd->resp)); + cmd->retries = 0; + + mrq.cmd = cmd; + cmd->data = NULL; + + mmc_wait_for_req(host, &mrq); + + err = cmd->error; + if (!cmd->error) + break; + + /* no point in retrying illegal APP commands */ + if (mmc_host_is_spi(host)) { + if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND) + break; + } + } + + return err; +} + +int mmc_app_set_bus_width(struct mmc_card *card, int width) +{ + struct mmc_command cmd = {}; + + cmd.opcode = SD_APP_SET_BUS_WIDTH; + cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; + + switch (width) { + case MMC_BUS_WIDTH_1: + cmd.arg = SD_BUS_WIDTH_1; + break; + case MMC_BUS_WIDTH_4: + cmd.arg = SD_BUS_WIDTH_4; + break; + default: + return -EINVAL; + } + + return mmc_wait_for_app_cmd(card->host, card, &cmd); +} + +int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) +{ + struct mmc_command cmd = {}; + int i, err = 0; + + cmd.opcode = SD_APP_OP_COND; + if (mmc_host_is_spi(host)) + cmd.arg = ocr & (1 << 30); /* SPI only defines one bit */ + else + cmd.arg = ocr; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR; + + for (i = 100; i; i--) { + err = mmc_wait_for_app_cmd(host, NULL, &cmd); + if (err) + break; + + /* if we're just probing, do a single pass */ + if (ocr == 0) + break; + + /* otherwise wait until reset completes */ + if (mmc_host_is_spi(host)) { + if (!(cmd.resp[0] & R1_SPI_IDLE)) + break; + } else { + if (cmd.resp[0] & MMC_CARD_BUSY) + break; + } + + err = -ETIMEDOUT; + + mmc_delay(10); + } + + if (!i) + pr_err("%s: card never left busy state\n", mmc_hostname(host)); + + if (rocr && !mmc_host_is_spi(host)) + *rocr = cmd.resp[0]; + + return err; +} + +int mmc_send_if_cond(struct mmc_host *host, u32 ocr) +{ + struct mmc_command cmd = {}; + int err; + static const u8 test_pattern = 0xAA; + u8 result_pattern; + + /* + * To support SD 2.0 cards, we must always invoke SD_SEND_IF_COND + * before SD_APP_OP_COND. This command will harmlessly fail for + * SD 1.0 cards. + */ + cmd.opcode = SD_SEND_IF_COND; + cmd.arg = ((ocr & 0xFF8000) != 0) << 8 | test_pattern; + cmd.flags = MMC_RSP_SPI_R7 | MMC_RSP_R7 | MMC_CMD_BCR; + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) + return err; + + if (mmc_host_is_spi(host)) + result_pattern = cmd.resp[1] & 0xFF; + else + result_pattern = cmd.resp[0] & 0xFF; + + if (result_pattern != test_pattern) + return -EIO; + + return 0; +} + +int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca) +{ + int err; + struct mmc_command cmd = {}; + + cmd.opcode = SD_SEND_RELATIVE_ADDR; + cmd.arg = 0; + cmd.flags = MMC_RSP_R6 | MMC_CMD_BCR; + + err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); + if (err) + return err; + + *rca = cmd.resp[0] >> 16; + + return 0; +} + +int mmc_app_send_scr(struct mmc_card *card) +{ + int err; + struct mmc_request mrq = {}; + struct mmc_command cmd = {}; + struct mmc_data data = {}; + struct scatterlist sg; + __be32 *scr; + + /* NOTE: caller guarantees scr is heap-allocated */ + + err = mmc_app_cmd(card->host, card); + if (err) + return err; + + /* dma onto stack is unsafe/nonportable, but callers to this + * routine normally provide temporary on-stack buffers ... + */ + scr = kmalloc(sizeof(card->raw_scr), GFP_KERNEL); + if (!scr) + return -ENOMEM; + + mrq.cmd = &cmd; + mrq.data = &data; + + cmd.opcode = SD_APP_SEND_SCR; + cmd.arg = 0; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; + + data.blksz = 8; + data.blocks = 1; + data.flags = MMC_DATA_READ; + data.sg = &sg; + data.sg_len = 1; + + sg_init_one(&sg, scr, 8); + + mmc_set_data_timeout(&data, card); + + mmc_wait_for_req(card->host, &mrq); + + card->raw_scr[0] = be32_to_cpu(scr[0]); + card->raw_scr[1] = be32_to_cpu(scr[1]); + + kfree(scr); + + if (cmd.error) + return cmd.error; + if (data.error) + return data.error; + + return 0; +} + +int mmc_sd_switch(struct mmc_card *card, int mode, int group, + u8 value, u8 *resp) +{ + struct mmc_request mrq = {}; + struct mmc_command cmd = {}; + struct mmc_data data = {}; + struct scatterlist sg; + + /* NOTE: caller guarantees resp is heap-allocated */ + + mode = !!mode; + value &= 0xF; + + mrq.cmd = &cmd; + mrq.data = &data; + + cmd.opcode = SD_SWITCH; + cmd.arg = mode << 31 | 0x00FFFFFF; + cmd.arg &= ~(0xF << (group * 4)); + cmd.arg |= value << (group * 4); + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; + + data.blksz = 64; + data.blocks = 1; + data.flags = MMC_DATA_READ; + data.sg = &sg; + data.sg_len = 1; + + sg_init_one(&sg, resp, 64); + + mmc_set_data_timeout(&data, card); + + mmc_wait_for_req(card->host, &mrq); + + if (cmd.error) + return cmd.error; + if (data.error) + return data.error; + + return 0; +} + +int mmc_app_sd_status(struct mmc_card *card, void *ssr) +{ + int err; + struct mmc_request mrq = {}; + struct mmc_command cmd = {}; + struct mmc_data data = {}; + struct scatterlist sg; + + /* NOTE: caller guarantees ssr is heap-allocated */ + + err = mmc_app_cmd(card->host, card); + if (err) + return err; + + mrq.cmd = &cmd; + mrq.data = &data; + + cmd.opcode = SD_APP_SD_STATUS; + cmd.arg = 0; + cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_ADTC; + + data.blksz = 64; + data.blocks = 1; + data.flags = MMC_DATA_READ; + data.sg = &sg; + data.sg_len = 1; + + sg_init_one(&sg, ssr, 64); + + mmc_set_data_timeout(&data, card); + + mmc_wait_for_req(card->host, &mrq); + + if (cmd.error) + return cmd.error; + if (data.error) + return data.error; + + return 0; +} diff --git a/drivers/mmc/core/sd_ops.h b/drivers/mmc/core/sd_ops.h new file mode 100644 index 000000000..2194cabfc --- /dev/null +++ b/drivers/mmc/core/sd_ops.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * linux/drivers/mmc/core/sd_ops.h + * + * Copyright 2006-2007 Pierre Ossman + */ + +#ifndef _MMC_SD_OPS_H +#define _MMC_SD_OPS_H + +#include <linux/types.h> + +struct mmc_card; +struct mmc_host; + +int mmc_app_set_bus_width(struct mmc_card *card, int width); +int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr); +int mmc_send_if_cond(struct mmc_host *host, u32 ocr); +int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca); +int mmc_app_send_scr(struct mmc_card *card); +int mmc_sd_switch(struct mmc_card *card, int mode, int group, + u8 value, u8 *resp); +int mmc_app_sd_status(struct mmc_card *card, void *ssr); +int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card); + +#endif + diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c new file mode 100644 index 000000000..85c2947ed --- /dev/null +++ b/drivers/mmc/core/sdio.c @@ -0,0 +1,1316 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * linux/drivers/mmc/sdio.c + * + * Copyright 2006-2007 Pierre Ossman + */ + +#include <linux/err.h> +#include <linux/pm_runtime.h> + +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/sdio_func.h> +#include <linux/mmc/sdio_ids.h> + +#include "core.h" +#include "card.h" +#include "host.h" +#include "bus.h" +#include "quirks.h" +#include "sd.h" +#include "sdio_bus.h" +#include "mmc_ops.h" +#include "sd_ops.h" +#include "sdio_ops.h" +#include "sdio_cis.h" + +MMC_DEV_ATTR(vendor, "0x%04x\n", card->cis.vendor); +MMC_DEV_ATTR(device, "0x%04x\n", card->cis.device); +MMC_DEV_ATTR(revision, "%u.%u\n", card->major_rev, card->minor_rev); +MMC_DEV_ATTR(ocr, "0x%08x\n", card->ocr); +MMC_DEV_ATTR(rca, "0x%04x\n", card->rca); + +#define sdio_info_attr(num) \ +static ssize_t info##num##_show(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct mmc_card *card = mmc_dev_to_card(dev); \ + \ + if (num > card->num_info) \ + return -ENODATA; \ + if (!card->info[num-1][0]) \ + return 0; \ + return sprintf(buf, "%s\n", card->info[num-1]); \ +} \ +static DEVICE_ATTR_RO(info##num) + +sdio_info_attr(1); +sdio_info_attr(2); +sdio_info_attr(3); +sdio_info_attr(4); + +static struct attribute *sdio_std_attrs[] = { + &dev_attr_vendor.attr, + &dev_attr_device.attr, + &dev_attr_revision.attr, + &dev_attr_info1.attr, + &dev_attr_info2.attr, + &dev_attr_info3.attr, + &dev_attr_info4.attr, + &dev_attr_ocr.attr, + &dev_attr_rca.attr, + NULL, +}; +ATTRIBUTE_GROUPS(sdio_std); + +static struct device_type sdio_type = { + .groups = sdio_std_groups, +}; + +static int sdio_read_fbr(struct sdio_func *func) +{ + int ret; + unsigned char data; + + if (mmc_card_nonstd_func_interface(func->card)) { + func->class = SDIO_CLASS_NONE; + return 0; + } + + ret = mmc_io_rw_direct(func->card, 0, 0, + SDIO_FBR_BASE(func->num) + SDIO_FBR_STD_IF, 0, &data); + if (ret) + goto out; + + data &= 0x0f; + + if (data == 0x0f) { + ret = mmc_io_rw_direct(func->card, 0, 0, + SDIO_FBR_BASE(func->num) + SDIO_FBR_STD_IF_EXT, 0, &data); + if (ret) + goto out; + } + + func->class = data; + +out: + return ret; +} + +static int sdio_init_func(struct mmc_card *card, unsigned int fn) +{ + int ret; + struct sdio_func *func; + + if (WARN_ON(fn > SDIO_MAX_FUNCS)) + return -EINVAL; + + func = sdio_alloc_func(card); + if (IS_ERR(func)) + return PTR_ERR(func); + + func->num = fn; + + if (!(card->quirks & MMC_QUIRK_NONSTD_SDIO)) { + ret = sdio_read_fbr(func); + if (ret) + goto fail; + + ret = sdio_read_func_cis(func); + if (ret) + goto fail; + } else { + func->vendor = func->card->cis.vendor; + func->device = func->card->cis.device; + func->max_blksize = func->card->cis.blksize; + } + + card->sdio_func[fn - 1] = func; + + return 0; + +fail: + /* + * It is okay to remove the function here even though we hold + * the host lock as we haven't registered the device yet. + */ + sdio_remove_func(func); + return ret; +} + +static int sdio_read_cccr(struct mmc_card *card, u32 ocr) +{ + int ret; + int cccr_vsn; + int uhs = ocr & R4_18V_PRESENT; + unsigned char data; + unsigned char speed; + + ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_CCCR, 0, &data); + if (ret) + goto out; + + cccr_vsn = data & 0x0f; + + if (cccr_vsn > SDIO_CCCR_REV_3_00) { + pr_err("%s: unrecognised CCCR structure version %d\n", + mmc_hostname(card->host), cccr_vsn); + return -EINVAL; + } + + card->cccr.sdio_vsn = (data & 0xf0) >> 4; + + ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_CAPS, 0, &data); + if (ret) + goto out; + + if (data & SDIO_CCCR_CAP_SMB) + card->cccr.multi_block = 1; + if (data & SDIO_CCCR_CAP_LSC) + card->cccr.low_speed = 1; + if (data & SDIO_CCCR_CAP_4BLS) + card->cccr.wide_bus = 1; + + if (cccr_vsn >= SDIO_CCCR_REV_1_10) { + ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_POWER, 0, &data); + if (ret) + goto out; + + if (data & SDIO_POWER_SMPC) + card->cccr.high_power = 1; + } + + if (cccr_vsn >= SDIO_CCCR_REV_1_20) { + ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed); + if (ret) + goto out; + + card->scr.sda_spec3 = 0; + card->sw_caps.sd3_bus_mode = 0; + card->sw_caps.sd3_drv_type = 0; + if (cccr_vsn >= SDIO_CCCR_REV_3_00 && uhs) { + card->scr.sda_spec3 = 1; + ret = mmc_io_rw_direct(card, 0, 0, + SDIO_CCCR_UHS, 0, &data); + if (ret) + goto out; + + if (mmc_host_uhs(card->host)) { + if (data & SDIO_UHS_DDR50) + card->sw_caps.sd3_bus_mode + |= SD_MODE_UHS_DDR50 | SD_MODE_UHS_SDR50 + | SD_MODE_UHS_SDR25 | SD_MODE_UHS_SDR12; + + if (data & SDIO_UHS_SDR50) + card->sw_caps.sd3_bus_mode + |= SD_MODE_UHS_SDR50 | SD_MODE_UHS_SDR25 + | SD_MODE_UHS_SDR12; + + if (data & SDIO_UHS_SDR104) + card->sw_caps.sd3_bus_mode + |= SD_MODE_UHS_SDR104 | SD_MODE_UHS_SDR50 + | SD_MODE_UHS_SDR25 | SD_MODE_UHS_SDR12; + } + + ret = mmc_io_rw_direct(card, 0, 0, + SDIO_CCCR_DRIVE_STRENGTH, 0, &data); + if (ret) + goto out; + + if (data & SDIO_DRIVE_SDTA) + card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_A; + if (data & SDIO_DRIVE_SDTC) + card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_C; + if (data & SDIO_DRIVE_SDTD) + card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_D; + } + + /* if no uhs mode ensure we check for high speed */ + if (!card->sw_caps.sd3_bus_mode) { + if (speed & SDIO_SPEED_SHS) { + card->cccr.high_speed = 1; + card->sw_caps.hs_max_dtr = 50000000; + } else { + card->cccr.high_speed = 0; + card->sw_caps.hs_max_dtr = 25000000; + } + } + } + +out: + return ret; +} + +static int sdio_enable_wide(struct mmc_card *card) +{ + int ret; + u8 ctrl; + + if (!(card->host->caps & MMC_CAP_4_BIT_DATA)) + return 0; + + if (card->cccr.low_speed && !card->cccr.wide_bus) + return 0; + + ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl); + if (ret) + return ret; + + if ((ctrl & SDIO_BUS_WIDTH_MASK) == SDIO_BUS_WIDTH_RESERVED) + pr_warn("%s: SDIO_CCCR_IF is invalid: 0x%02x\n", + mmc_hostname(card->host), ctrl); + + /* set as 4-bit bus width */ + ctrl &= ~SDIO_BUS_WIDTH_MASK; + ctrl |= SDIO_BUS_WIDTH_4BIT; + + ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL); + if (ret) + return ret; + + return 1; +} + +/* + * If desired, disconnect the pull-up resistor on CD/DAT[3] (pin 1) + * of the card. This may be required on certain setups of boards, + * controllers and embedded sdio device which do not need the card's + * pull-up. As a result, card detection is disabled and power is saved. + */ +static int sdio_disable_cd(struct mmc_card *card) +{ + int ret; + u8 ctrl; + + if (!mmc_card_disable_cd(card)) + return 0; + + ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl); + if (ret) + return ret; + + ctrl |= SDIO_BUS_CD_DISABLE; + + return mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL); +} + +/* + * Devices that remain active during a system suspend are + * put back into 1-bit mode. + */ +static int sdio_disable_wide(struct mmc_card *card) +{ + int ret; + u8 ctrl; + + if (!(card->host->caps & MMC_CAP_4_BIT_DATA)) + return 0; + + if (card->cccr.low_speed && !card->cccr.wide_bus) + return 0; + + ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl); + if (ret) + return ret; + + if (!(ctrl & SDIO_BUS_WIDTH_4BIT)) + return 0; + + ctrl &= ~SDIO_BUS_WIDTH_4BIT; + ctrl |= SDIO_BUS_ASYNC_INT; + + ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL); + if (ret) + return ret; + + mmc_set_bus_width(card->host, MMC_BUS_WIDTH_1); + + return 0; +} + +static int sdio_disable_4bit_bus(struct mmc_card *card) +{ + int err; + + if (card->type == MMC_TYPE_SDIO) + goto out; + + if (!(card->host->caps & MMC_CAP_4_BIT_DATA)) + return 0; + + if (!(card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) + return 0; + + err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_1); + if (err) + return err; + +out: + return sdio_disable_wide(card); +} + + +static int sdio_enable_4bit_bus(struct mmc_card *card) +{ + int err; + + err = sdio_enable_wide(card); + if (err <= 0) + return err; + if (card->type == MMC_TYPE_SDIO) + goto out; + + if (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4) { + err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4); + if (err) { + sdio_disable_wide(card); + return err; + } + } +out: + mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4); + + return 0; +} + + +/* + * Test if the card supports high-speed mode and, if so, switch to it. + */ +static int mmc_sdio_switch_hs(struct mmc_card *card, int enable) +{ + int ret; + u8 speed; + + if (!(card->host->caps & MMC_CAP_SD_HIGHSPEED)) + return 0; + + if (!card->cccr.high_speed) + return 0; + + ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed); + if (ret) + return ret; + + if (enable) + speed |= SDIO_SPEED_EHS; + else + speed &= ~SDIO_SPEED_EHS; + + ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL); + if (ret) + return ret; + + return 1; +} + +/* + * Enable SDIO/combo card's high-speed mode. Return 0/1 if [not]supported. + */ +static int sdio_enable_hs(struct mmc_card *card) +{ + int ret; + + ret = mmc_sdio_switch_hs(card, true); + if (ret <= 0 || card->type == MMC_TYPE_SDIO) + return ret; + + ret = mmc_sd_switch_hs(card); + if (ret <= 0) + mmc_sdio_switch_hs(card, false); + + return ret; +} + +static unsigned mmc_sdio_get_max_clock(struct mmc_card *card) +{ + unsigned max_dtr; + + if (mmc_card_hs(card)) { + /* + * The SDIO specification doesn't mention how + * the CIS transfer speed register relates to + * high-speed, but it seems that 50 MHz is + * mandatory. + */ + max_dtr = 50000000; + } else { + max_dtr = card->cis.max_dtr; + } + + if (card->type == MMC_TYPE_SD_COMBO) + max_dtr = min(max_dtr, mmc_sd_get_max_clock(card)); + + return max_dtr; +} + +static unsigned char host_drive_to_sdio_drive(int host_strength) +{ + switch (host_strength) { + case MMC_SET_DRIVER_TYPE_A: + return SDIO_DTSx_SET_TYPE_A; + case MMC_SET_DRIVER_TYPE_B: + return SDIO_DTSx_SET_TYPE_B; + case MMC_SET_DRIVER_TYPE_C: + return SDIO_DTSx_SET_TYPE_C; + case MMC_SET_DRIVER_TYPE_D: + return SDIO_DTSx_SET_TYPE_D; + default: + return SDIO_DTSx_SET_TYPE_B; + } +} + +static void sdio_select_driver_type(struct mmc_card *card) +{ + int card_drv_type, drive_strength, drv_type; + unsigned char card_strength; + int err; + + card->drive_strength = 0; + + card_drv_type = card->sw_caps.sd3_drv_type | SD_DRIVER_TYPE_B; + + drive_strength = mmc_select_drive_strength(card, + card->sw_caps.uhs_max_dtr, + card_drv_type, &drv_type); + + if (drive_strength) { + /* if error just use default for drive strength B */ + err = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_DRIVE_STRENGTH, 0, + &card_strength); + if (err) + return; + + card_strength &= ~(SDIO_DRIVE_DTSx_MASK<<SDIO_DRIVE_DTSx_SHIFT); + card_strength |= host_drive_to_sdio_drive(drive_strength); + + /* if error default to drive strength B */ + err = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_DRIVE_STRENGTH, + card_strength, NULL); + if (err) + return; + card->drive_strength = drive_strength; + } + + if (drv_type) + mmc_set_driver_type(card->host, drv_type); +} + + +static int sdio_set_bus_speed_mode(struct mmc_card *card) +{ + unsigned int bus_speed, timing; + int err; + unsigned char speed; + unsigned int max_rate; + + /* + * If the host doesn't support any of the UHS-I modes, fallback on + * default speed. + */ + if (!mmc_host_uhs(card->host)) + return 0; + + bus_speed = SDIO_SPEED_SDR12; + timing = MMC_TIMING_UHS_SDR12; + if ((card->host->caps & MMC_CAP_UHS_SDR104) && + (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104)) { + bus_speed = SDIO_SPEED_SDR104; + timing = MMC_TIMING_UHS_SDR104; + card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR; + card->sd_bus_speed = UHS_SDR104_BUS_SPEED; + } else if ((card->host->caps & MMC_CAP_UHS_DDR50) && + (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_DDR50)) { + bus_speed = SDIO_SPEED_DDR50; + timing = MMC_TIMING_UHS_DDR50; + card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR; + card->sd_bus_speed = UHS_DDR50_BUS_SPEED; + } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_SDR50)) && (card->sw_caps.sd3_bus_mode & + SD_MODE_UHS_SDR50)) { + bus_speed = SDIO_SPEED_SDR50; + timing = MMC_TIMING_UHS_SDR50; + card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR; + card->sd_bus_speed = UHS_SDR50_BUS_SPEED; + } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25)) && + (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR25)) { + bus_speed = SDIO_SPEED_SDR25; + timing = MMC_TIMING_UHS_SDR25; + card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR; + card->sd_bus_speed = UHS_SDR25_BUS_SPEED; + } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25 | + MMC_CAP_UHS_SDR12)) && (card->sw_caps.sd3_bus_mode & + SD_MODE_UHS_SDR12)) { + bus_speed = SDIO_SPEED_SDR12; + timing = MMC_TIMING_UHS_SDR12; + card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR; + card->sd_bus_speed = UHS_SDR12_BUS_SPEED; + } + + err = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed); + if (err) + return err; + + speed &= ~SDIO_SPEED_BSS_MASK; + speed |= bus_speed; + err = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL); + if (err) + return err; + + max_rate = min_not_zero(card->quirk_max_rate, + card->sw_caps.uhs_max_dtr); + + mmc_set_timing(card->host, timing); + mmc_set_clock(card->host, max_rate); + + return 0; +} + +/* + * UHS-I specific initialization procedure + */ +static int mmc_sdio_init_uhs_card(struct mmc_card *card) +{ + int err; + + if (!card->scr.sda_spec3) + return 0; + + /* Switch to wider bus */ + err = sdio_enable_4bit_bus(card); + if (err) + goto out; + + /* Set the driver strength for the card */ + sdio_select_driver_type(card); + + /* Set bus speed mode of the card */ + err = sdio_set_bus_speed_mode(card); + if (err) + goto out; + + /* + * SPI mode doesn't define CMD19 and tuning is only valid for SDR50 and + * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104. + */ + if (!mmc_host_is_spi(card->host) && + ((card->host->ios.timing == MMC_TIMING_UHS_SDR50) || + (card->host->ios.timing == MMC_TIMING_UHS_SDR104))) + err = mmc_execute_tuning(card); +out: + return err; +} + +static int mmc_sdio_pre_init(struct mmc_host *host, u32 ocr, + struct mmc_card *card) +{ + if (card) + mmc_remove_card(card); + + /* + * Reset the card by performing the same steps that are taken by + * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe. + * + * sdio_reset() is technically not needed. Having just powered up the + * hardware, it should already be in reset state. However, some + * platforms (such as SD8686 on OLPC) do not instantly cut power, + * meaning that a reset is required when restoring power soon after + * powering off. It is harmless in other cases. + * + * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec, + * is not necessary for non-removable cards. However, it is required + * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and + * harmless in other situations. + * + */ + + sdio_reset(host); + mmc_go_idle(host); + mmc_send_if_cond(host, ocr); + return mmc_send_io_op_cond(host, 0, NULL); +} + +/* + * Handle the detection and initialisation of a card. + * + * In the case of a resume, "oldcard" will contain the card + * we're trying to reinitialise. + */ +static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, + struct mmc_card *oldcard) +{ + struct mmc_card *card; + int err; + int retries = 10; + u32 rocr = 0; + u32 ocr_card = ocr; + + WARN_ON(!host->claimed); + + /* to query card if 1.8V signalling is supported */ + if (mmc_host_uhs(host)) + ocr |= R4_18V_PRESENT; + +try_again: + if (!retries) { + pr_warn("%s: Skipping voltage switch\n", mmc_hostname(host)); + ocr &= ~R4_18V_PRESENT; + } + + /* + * Inform the card of the voltage + */ + err = mmc_send_io_op_cond(host, ocr, &rocr); + if (err) + return err; + + /* + * For SPI, enable CRC as appropriate. + */ + if (mmc_host_is_spi(host)) { + err = mmc_spi_set_crc(host, use_spi_crc); + if (err) + return err; + } + + /* + * Allocate card structure. + */ + card = mmc_alloc_card(host, &sdio_type); + if (IS_ERR(card)) + return PTR_ERR(card); + + if ((rocr & R4_MEMORY_PRESENT) && + mmc_sd_get_cid(host, ocr & rocr, card->raw_cid, NULL) == 0) { + card->type = MMC_TYPE_SD_COMBO; + + if (oldcard && (oldcard->type != MMC_TYPE_SD_COMBO || + memcmp(card->raw_cid, oldcard->raw_cid, sizeof(card->raw_cid)) != 0)) { + err = -ENOENT; + goto mismatch; + } + } else { + card->type = MMC_TYPE_SDIO; + + if (oldcard && oldcard->type != MMC_TYPE_SDIO) { + err = -ENOENT; + goto mismatch; + } + } + + /* + * Call the optional HC's init_card function to handle quirks. + */ + if (host->ops->init_card) + host->ops->init_card(host, card); + + card->ocr = ocr_card; + + /* + * If the host and card support UHS-I mode request the card + * to switch to 1.8V signaling level. No 1.8v signalling if + * UHS mode is not enabled to maintain compatibility and some + * systems that claim 1.8v signalling in fact do not support + * it. Per SDIO spec v3, section 3.1.2, if the voltage is already + * 1.8v, the card sets S18A to 0 in the R4 response. So it will + * fails to check rocr & R4_18V_PRESENT, but we still need to + * try to init uhs card. sdio_read_cccr will take over this task + * to make sure which speed mode should work. + */ + if (rocr & ocr & R4_18V_PRESENT) { + err = mmc_set_uhs_voltage(host, ocr_card); + if (err == -EAGAIN) { + mmc_sdio_pre_init(host, ocr_card, card); + retries--; + goto try_again; + } else if (err) { + ocr &= ~R4_18V_PRESENT; + } + } + + /* + * For native busses: set card RCA and quit open drain mode. + */ + if (!mmc_host_is_spi(host)) { + err = mmc_send_relative_addr(host, &card->rca); + if (err) + goto remove; + + /* + * Update oldcard with the new RCA received from the SDIO + * device -- we're doing this so that it's updated in the + * "card" struct when oldcard overwrites that later. + */ + if (oldcard) + oldcard->rca = card->rca; + } + + /* + * Read CSD, before selecting the card + */ + if (!oldcard && card->type == MMC_TYPE_SD_COMBO) { + err = mmc_sd_get_csd(host, card); + if (err) + goto remove; + + mmc_decode_cid(card); + } + + /* + * Select card, as all following commands rely on that. + */ + if (!mmc_host_is_spi(host)) { + err = mmc_select_card(card); + if (err) + goto remove; + } + + if (card->quirks & MMC_QUIRK_NONSTD_SDIO) { + /* + * This is non-standard SDIO device, meaning it doesn't + * have any CIA (Common I/O area) registers present. + * It's host's responsibility to fill cccr and cis + * structures in init_card(). + */ + mmc_set_clock(host, card->cis.max_dtr); + + if (card->cccr.high_speed) { + mmc_set_timing(card->host, MMC_TIMING_SD_HS); + } + + if (oldcard) + mmc_remove_card(card); + else + host->card = card; + + return 0; + } + + /* + * Read the common registers. Note that we should try to + * validate whether UHS would work or not. + */ + err = sdio_read_cccr(card, ocr); + if (err) { + mmc_sdio_pre_init(host, ocr_card, card); + if (ocr & R4_18V_PRESENT) { + /* Retry init sequence, but without R4_18V_PRESENT. */ + retries = 0; + goto try_again; + } + return err; + } + + /* + * Read the common CIS tuples. + */ + err = sdio_read_common_cis(card); + if (err) + goto remove; + + if (oldcard) { + if (card->cis.vendor == oldcard->cis.vendor && + card->cis.device == oldcard->cis.device) { + mmc_remove_card(card); + card = oldcard; + } else { + err = -ENOENT; + goto mismatch; + } + } + + mmc_fixup_device(card, sdio_fixup_methods); + + if (card->type == MMC_TYPE_SD_COMBO) { + err = mmc_sd_setup_card(host, card, oldcard != NULL); + /* handle as SDIO-only card if memory init failed */ + if (err) { + mmc_go_idle(host); + if (mmc_host_is_spi(host)) + /* should not fail, as it worked previously */ + mmc_spi_set_crc(host, use_spi_crc); + card->type = MMC_TYPE_SDIO; + } else + card->dev.type = &sd_type; + } + + /* + * If needed, disconnect card detection pull-up resistor. + */ + err = sdio_disable_cd(card); + if (err) + goto remove; + + /* Initialization sequence for UHS-I cards */ + /* Only if card supports 1.8v and UHS signaling */ + if ((ocr & R4_18V_PRESENT) && card->sw_caps.sd3_bus_mode) { + err = mmc_sdio_init_uhs_card(card); + if (err) + goto remove; + } else { + /* + * Switch to high-speed (if supported). + */ + err = sdio_enable_hs(card); + if (err > 0) + mmc_set_timing(card->host, MMC_TIMING_SD_HS); + else if (err) + goto remove; + + /* + * Change to the card's maximum speed. + */ + mmc_set_clock(host, mmc_sdio_get_max_clock(card)); + + /* + * Switch to wider bus (if supported). + */ + err = sdio_enable_4bit_bus(card); + if (err) + goto remove; + } + + if (host->caps2 & MMC_CAP2_AVOID_3_3V && + host->ios.signal_voltage == MMC_SIGNAL_VOLTAGE_330) { + pr_err("%s: Host failed to negotiate down from 3.3V\n", + mmc_hostname(host)); + err = -EINVAL; + goto remove; + } + + host->card = card; + return 0; + +mismatch: + pr_debug("%s: Perhaps the card was replaced\n", mmc_hostname(host)); +remove: + if (oldcard != card) + mmc_remove_card(card); + return err; +} + +static int mmc_sdio_reinit_card(struct mmc_host *host) +{ + int ret; + + ret = mmc_sdio_pre_init(host, host->card->ocr, NULL); + if (ret) + return ret; + + return mmc_sdio_init_card(host, host->card->ocr, host->card); +} + +/* + * Host is being removed. Free up the current card. + */ +static void mmc_sdio_remove(struct mmc_host *host) +{ + int i; + + for (i = 0;i < host->card->sdio_funcs;i++) { + if (host->card->sdio_func[i]) { + sdio_remove_func(host->card->sdio_func[i]); + host->card->sdio_func[i] = NULL; + } + } + + mmc_remove_card(host->card); + host->card = NULL; +} + +/* + * Card detection - card is alive. + */ +static int mmc_sdio_alive(struct mmc_host *host) +{ + return mmc_select_card(host->card); +} + +/* + * Card detection callback from host. + */ +static void mmc_sdio_detect(struct mmc_host *host) +{ + int err; + + /* Make sure card is powered before detecting it */ + if (host->caps & MMC_CAP_POWER_OFF_CARD) { + err = pm_runtime_get_sync(&host->card->dev); + if (err < 0) { + pm_runtime_put_noidle(&host->card->dev); + goto out; + } + } + + mmc_claim_host(host); + + /* + * Just check if our card has been removed. + */ + err = _mmc_detect_card_removed(host); + + mmc_release_host(host); + + /* + * Tell PM core it's OK to power off the card now. + * + * The _sync variant is used in order to ensure that the card + * is left powered off in case an error occurred, and the card + * is going to be removed. + * + * Since there is no specific reason to believe a new user + * is about to show up at this point, the _sync variant is + * desirable anyway. + */ + if (host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_sync(&host->card->dev); + +out: + if (err) { + mmc_sdio_remove(host); + + mmc_claim_host(host); + mmc_detach_bus(host); + mmc_power_off(host); + mmc_release_host(host); + } +} + +/* + * SDIO pre_suspend. We need to suspend all functions separately. + * Therefore all registered functions must have drivers with suspend + * and resume methods. Failing that we simply remove the whole card. + */ +static int mmc_sdio_pre_suspend(struct mmc_host *host) +{ + int i; + + for (i = 0; i < host->card->sdio_funcs; i++) { + struct sdio_func *func = host->card->sdio_func[i]; + if (func && sdio_func_present(func) && func->dev.driver) { + const struct dev_pm_ops *pmops = func->dev.driver->pm; + if (!pmops || !pmops->suspend || !pmops->resume) + /* force removal of entire card in that case */ + goto remove; + } + } + + return 0; + +remove: + if (!mmc_card_is_removable(host)) { + dev_warn(mmc_dev(host), + "missing suspend/resume ops for non-removable SDIO card\n"); + /* Don't remove a non-removable card - we can't re-detect it. */ + return 0; + } + + /* Remove the SDIO card and let it be re-detected later on. */ + mmc_sdio_remove(host); + mmc_claim_host(host); + mmc_detach_bus(host); + mmc_power_off(host); + mmc_release_host(host); + host->pm_flags = 0; + + return 0; +} + +/* + * SDIO suspend. Suspend all functions separately. + */ +static int mmc_sdio_suspend(struct mmc_host *host) +{ + WARN_ON(host->sdio_irqs && !mmc_card_keep_power(host)); + + /* Prevent processing of SDIO IRQs in suspended state. */ + mmc_card_set_suspended(host->card); + cancel_delayed_work_sync(&host->sdio_irq_work); + + mmc_claim_host(host); + + if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) + sdio_disable_4bit_bus(host->card); + + if (!mmc_card_keep_power(host)) { + mmc_power_off(host); + } else if (host->retune_period) { + mmc_retune_timer_stop(host); + mmc_retune_needed(host); + } + + mmc_release_host(host); + + return 0; +} + +static int mmc_sdio_resume(struct mmc_host *host) +{ + int err = 0; + + /* Basic card reinitialization. */ + mmc_claim_host(host); + + /* + * Restore power and reinitialize the card when needed. Note that a + * removable card is checked from a detect work later on in the resume + * process. + */ + if (!mmc_card_keep_power(host)) { + mmc_power_up(host, host->card->ocr); + /* + * Tell runtime PM core we just powered up the card, + * since it still believes the card is powered off. + * Note that currently runtime PM is only enabled + * for SDIO cards that are MMC_CAP_POWER_OFF_CARD + */ + if (host->caps & MMC_CAP_POWER_OFF_CARD) { + pm_runtime_disable(&host->card->dev); + pm_runtime_set_active(&host->card->dev); + pm_runtime_enable(&host->card->dev); + } + err = mmc_sdio_reinit_card(host); + } else if (mmc_card_wake_sdio_irq(host)) { + /* + * We may have switched to 1-bit mode during suspend, + * need to hold retuning, because tuning only supprt + * 4-bit mode or 8 bit mode. + */ + mmc_retune_hold_now(host); + err = sdio_enable_4bit_bus(host->card); + mmc_retune_release(host); + } + + if (err) + goto out; + + /* Allow SDIO IRQs to be processed again. */ + mmc_card_clr_suspended(host->card); + + if (host->sdio_irqs) { + if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) + wake_up_process(host->sdio_irq_thread); + else if (host->caps & MMC_CAP_SDIO_IRQ) + queue_delayed_work(system_wq, &host->sdio_irq_work, 0); + } + +out: + mmc_release_host(host); + + host->pm_flags &= ~MMC_PM_KEEP_POWER; + return err; +} + +static int mmc_sdio_runtime_suspend(struct mmc_host *host) +{ + /* No references to the card, cut the power to it. */ + mmc_claim_host(host); + mmc_power_off(host); + mmc_release_host(host); + + return 0; +} + +static int mmc_sdio_runtime_resume(struct mmc_host *host) +{ + int ret; + + /* Restore power and re-initialize. */ + mmc_claim_host(host); + mmc_power_up(host, host->card->ocr); + ret = mmc_sdio_reinit_card(host); + mmc_release_host(host); + + return ret; +} + +/* + * SDIO HW reset + * + * Returns 0 if the HW reset was executed synchronously, returns 1 if the HW + * reset was asynchronously scheduled, else a negative error code. + */ +static int mmc_sdio_hw_reset(struct mmc_host *host) +{ + struct mmc_card *card = host->card; + + /* + * In case the card is shared among multiple func drivers, reset the + * card through a rescan work. In this way it will be removed and + * re-detected, thus all func drivers becomes informed about it. + */ + if (atomic_read(&card->sdio_funcs_probed) > 1) { + if (mmc_card_removed(card)) + return 1; + host->rescan_entered = 0; + mmc_card_set_removed(card); + _mmc_detect_change(host, 0, false); + return 1; + } + + /* + * A single func driver has been probed, then let's skip the heavy + * hotplug dance above and execute the reset immediately. + */ + mmc_power_cycle(host, card->ocr); + return mmc_sdio_reinit_card(host); +} + +static int mmc_sdio_sw_reset(struct mmc_host *host) +{ + mmc_set_clock(host, host->f_init); + sdio_reset(host); + mmc_go_idle(host); + + mmc_set_initial_state(host); + mmc_set_initial_signal_voltage(host); + + return mmc_sdio_reinit_card(host); +} + +static const struct mmc_bus_ops mmc_sdio_ops = { + .remove = mmc_sdio_remove, + .detect = mmc_sdio_detect, + .pre_suspend = mmc_sdio_pre_suspend, + .suspend = mmc_sdio_suspend, + .resume = mmc_sdio_resume, + .runtime_suspend = mmc_sdio_runtime_suspend, + .runtime_resume = mmc_sdio_runtime_resume, + .alive = mmc_sdio_alive, + .hw_reset = mmc_sdio_hw_reset, + .sw_reset = mmc_sdio_sw_reset, +}; + + +/* + * Starting point for SDIO card init. + */ +int mmc_attach_sdio(struct mmc_host *host) +{ + int err, i, funcs; + u32 ocr, rocr; + struct mmc_card *card; + + WARN_ON(!host->claimed); + + err = mmc_send_io_op_cond(host, 0, &ocr); + if (err) + return err; + + mmc_attach_bus(host, &mmc_sdio_ops); + if (host->ocr_avail_sdio) + host->ocr_avail = host->ocr_avail_sdio; + + + rocr = mmc_select_voltage(host, ocr); + + /* + * Can we support the voltage(s) of the card(s)? + */ + if (!rocr) { + err = -EINVAL; + goto err; + } + + /* + * Detect and init the card. + */ + err = mmc_sdio_init_card(host, rocr, NULL); + if (err) + goto err; + + card = host->card; + + /* + * Enable runtime PM only if supported by host+card+board + */ + if (host->caps & MMC_CAP_POWER_OFF_CARD) { + /* + * Do not allow runtime suspend until after SDIO function + * devices are added. + */ + pm_runtime_get_noresume(&card->dev); + + /* + * Let runtime PM core know our card is active + */ + err = pm_runtime_set_active(&card->dev); + if (err) + goto remove; + + /* + * Enable runtime PM for this card + */ + pm_runtime_enable(&card->dev); + } + + /* + * The number of functions on the card is encoded inside + * the ocr. + */ + funcs = (ocr & 0x70000000) >> 28; + card->sdio_funcs = 0; + + /* + * Initialize (but don't add) all present functions. + */ + for (i = 0; i < funcs; i++, card->sdio_funcs++) { + err = sdio_init_func(host->card, i + 1); + if (err) + goto remove; + + /* + * Enable Runtime PM for this func (if supported) + */ + if (host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_enable(&card->sdio_func[i]->dev); + } + + /* + * First add the card to the driver model... + */ + mmc_release_host(host); + err = mmc_add_card(host->card); + if (err) + goto remove_added; + + /* + * ...then the SDIO functions. + */ + for (i = 0;i < funcs;i++) { + err = sdio_add_func(host->card->sdio_func[i]); + if (err) + goto remove_added; + } + + if (host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put(&card->dev); + + mmc_claim_host(host); + return 0; + + +remove: + mmc_release_host(host); +remove_added: + /* + * The devices are being deleted so it is not necessary to disable + * runtime PM. Similarly we also don't pm_runtime_put() the SDIO card + * because it needs to be active to remove any function devices that + * were probed, and after that it gets deleted. + */ + mmc_sdio_remove(host); + mmc_claim_host(host); +err: + mmc_detach_bus(host); + + pr_err("%s: error %d whilst initialising SDIO card\n", + mmc_hostname(host), err); + + return err; +} + diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c new file mode 100644 index 000000000..89dd49260 --- /dev/null +++ b/drivers/mmc/core/sdio_bus.c @@ -0,0 +1,399 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * linux/drivers/mmc/core/sdio_bus.c + * + * Copyright 2007 Pierre Ossman + * + * SDIO function driver model + */ + +#include <linux/device.h> +#include <linux/err.h> +#include <linux/export.h> +#include <linux/slab.h> +#include <linux/pm_runtime.h> +#include <linux/pm_domain.h> +#include <linux/acpi.h> + +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sdio_func.h> +#include <linux/of.h> + +#include "core.h" +#include "card.h" +#include "sdio_cis.h" +#include "sdio_bus.h" + +#define to_sdio_driver(d) container_of(d, struct sdio_driver, drv) + +/* show configuration fields */ +#define sdio_config_attr(field, format_string, args...) \ +static ssize_t \ +field##_show(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct sdio_func *func; \ + \ + func = dev_to_sdio_func (dev); \ + return sprintf(buf, format_string, args); \ +} \ +static DEVICE_ATTR_RO(field) + +sdio_config_attr(class, "0x%02x\n", func->class); +sdio_config_attr(vendor, "0x%04x\n", func->vendor); +sdio_config_attr(device, "0x%04x\n", func->device); +sdio_config_attr(revision, "%u.%u\n", func->major_rev, func->minor_rev); +sdio_config_attr(modalias, "sdio:c%02Xv%04Xd%04X\n", func->class, func->vendor, func->device); + +#define sdio_info_attr(num) \ +static ssize_t info##num##_show(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct sdio_func *func = dev_to_sdio_func(dev); \ + \ + if (num > func->num_info) \ + return -ENODATA; \ + if (!func->info[num-1][0]) \ + return 0; \ + return sprintf(buf, "%s\n", func->info[num-1]); \ +} \ +static DEVICE_ATTR_RO(info##num) + +sdio_info_attr(1); +sdio_info_attr(2); +sdio_info_attr(3); +sdio_info_attr(4); + +static struct attribute *sdio_dev_attrs[] = { + &dev_attr_class.attr, + &dev_attr_vendor.attr, + &dev_attr_device.attr, + &dev_attr_revision.attr, + &dev_attr_info1.attr, + &dev_attr_info2.attr, + &dev_attr_info3.attr, + &dev_attr_info4.attr, + &dev_attr_modalias.attr, + NULL, +}; +ATTRIBUTE_GROUPS(sdio_dev); + +static const struct sdio_device_id *sdio_match_one(struct sdio_func *func, + const struct sdio_device_id *id) +{ + if (id->class != (__u8)SDIO_ANY_ID && id->class != func->class) + return NULL; + if (id->vendor != (__u16)SDIO_ANY_ID && id->vendor != func->vendor) + return NULL; + if (id->device != (__u16)SDIO_ANY_ID && id->device != func->device) + return NULL; + return id; +} + +static const struct sdio_device_id *sdio_match_device(struct sdio_func *func, + struct sdio_driver *sdrv) +{ + const struct sdio_device_id *ids; + + ids = sdrv->id_table; + + if (ids) { + while (ids->class || ids->vendor || ids->device) { + if (sdio_match_one(func, ids)) + return ids; + ids++; + } + } + + return NULL; +} + +static int sdio_bus_match(struct device *dev, struct device_driver *drv) +{ + struct sdio_func *func = dev_to_sdio_func(dev); + struct sdio_driver *sdrv = to_sdio_driver(drv); + + if (sdio_match_device(func, sdrv)) + return 1; + + return 0; +} + +static int +sdio_bus_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct sdio_func *func = dev_to_sdio_func(dev); + unsigned int i; + + if (add_uevent_var(env, + "SDIO_CLASS=%02X", func->class)) + return -ENOMEM; + + if (add_uevent_var(env, + "SDIO_ID=%04X:%04X", func->vendor, func->device)) + return -ENOMEM; + + if (add_uevent_var(env, + "SDIO_REVISION=%u.%u", func->major_rev, func->minor_rev)) + return -ENOMEM; + + for (i = 0; i < func->num_info; i++) { + if (add_uevent_var(env, "SDIO_INFO%u=%s", i+1, func->info[i])) + return -ENOMEM; + } + + if (add_uevent_var(env, + "MODALIAS=sdio:c%02Xv%04Xd%04X", + func->class, func->vendor, func->device)) + return -ENOMEM; + + return 0; +} + +static int sdio_bus_probe(struct device *dev) +{ + struct sdio_driver *drv = to_sdio_driver(dev->driver); + struct sdio_func *func = dev_to_sdio_func(dev); + const struct sdio_device_id *id; + int ret; + + id = sdio_match_device(func, drv); + if (!id) + return -ENODEV; + + ret = dev_pm_domain_attach(dev, false); + if (ret) + return ret; + + atomic_inc(&func->card->sdio_funcs_probed); + + /* Unbound SDIO functions are always suspended. + * During probe, the function is set active and the usage count + * is incremented. If the driver supports runtime PM, + * it should call pm_runtime_put_noidle() in its probe routine and + * pm_runtime_get_noresume() in its remove routine. + */ + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) { + ret = pm_runtime_get_sync(dev); + if (ret < 0) + goto disable_runtimepm; + } + + /* Set the default block size so the driver is sure it's something + * sensible. */ + sdio_claim_host(func); + if (mmc_card_removed(func->card)) + ret = -ENOMEDIUM; + else + ret = sdio_set_block_size(func, 0); + sdio_release_host(func); + if (ret) + goto disable_runtimepm; + + ret = drv->probe(func, id); + if (ret) + goto disable_runtimepm; + + return 0; + +disable_runtimepm: + atomic_dec(&func->card->sdio_funcs_probed); + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_noidle(dev); + dev_pm_domain_detach(dev, false); + return ret; +} + +static int sdio_bus_remove(struct device *dev) +{ + struct sdio_driver *drv = to_sdio_driver(dev->driver); + struct sdio_func *func = dev_to_sdio_func(dev); + + /* Make sure card is powered before invoking ->remove() */ + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_get_sync(dev); + + drv->remove(func); + atomic_dec(&func->card->sdio_funcs_probed); + + if (func->irq_handler) { + pr_warn("WARNING: driver %s did not remove its interrupt handler!\n", + drv->name); + sdio_claim_host(func); + sdio_release_irq(func); + sdio_release_host(func); + } + + /* First, undo the increment made directly above */ + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_noidle(dev); + + /* Then undo the runtime PM settings in sdio_bus_probe() */ + if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) + pm_runtime_put_sync(dev); + + dev_pm_domain_detach(dev, false); + + return 0; +} + +static const struct dev_pm_ops sdio_bus_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_generic_suspend, pm_generic_resume) + SET_RUNTIME_PM_OPS( + pm_generic_runtime_suspend, + pm_generic_runtime_resume, + NULL + ) +}; + +static struct bus_type sdio_bus_type = { + .name = "sdio", + .dev_groups = sdio_dev_groups, + .match = sdio_bus_match, + .uevent = sdio_bus_uevent, + .probe = sdio_bus_probe, + .remove = sdio_bus_remove, + .pm = &sdio_bus_pm_ops, +}; + +int sdio_register_bus(void) +{ + return bus_register(&sdio_bus_type); +} + +void sdio_unregister_bus(void) +{ + bus_unregister(&sdio_bus_type); +} + +/** + * sdio_register_driver - register a function driver + * @drv: SDIO function driver + */ +int sdio_register_driver(struct sdio_driver *drv) +{ + drv->drv.name = drv->name; + drv->drv.bus = &sdio_bus_type; + return driver_register(&drv->drv); +} +EXPORT_SYMBOL_GPL(sdio_register_driver); + +/** + * sdio_unregister_driver - unregister a function driver + * @drv: SDIO function driver + */ +void sdio_unregister_driver(struct sdio_driver *drv) +{ + drv->drv.bus = &sdio_bus_type; + driver_unregister(&drv->drv); +} +EXPORT_SYMBOL_GPL(sdio_unregister_driver); + +static void sdio_release_func(struct device *dev) +{ + struct sdio_func *func = dev_to_sdio_func(dev); + + if (!(func->card->quirks & MMC_QUIRK_NONSTD_SDIO)) + sdio_free_func_cis(func); + + /* + * We have now removed the link to the tuples in the + * card structure, so remove the reference. + */ + put_device(&func->card->dev); + + kfree(func->info); + kfree(func->tmpbuf); + kfree(func); +} + +/* + * Allocate and initialise a new SDIO function structure. + */ +struct sdio_func *sdio_alloc_func(struct mmc_card *card) +{ + struct sdio_func *func; + + func = kzalloc(sizeof(struct sdio_func), GFP_KERNEL); + if (!func) + return ERR_PTR(-ENOMEM); + + /* + * allocate buffer separately to make sure it's properly aligned for + * DMA usage (incl. 64 bit DMA) + */ + func->tmpbuf = kmalloc(4, GFP_KERNEL); + if (!func->tmpbuf) { + kfree(func); + return ERR_PTR(-ENOMEM); + } + + func->card = card; + + device_initialize(&func->dev); + + /* + * We may link to tuples in the card structure, + * we need make sure we have a reference to it. + */ + get_device(&func->card->dev); + + func->dev.parent = &card->dev; + func->dev.bus = &sdio_bus_type; + func->dev.release = sdio_release_func; + + return func; +} + +#ifdef CONFIG_ACPI +static void sdio_acpi_set_handle(struct sdio_func *func) +{ + struct mmc_host *host = func->card->host; + u64 addr = ((u64)host->slotno << 16) | func->num; + + acpi_preset_companion(&func->dev, ACPI_COMPANION(host->parent), addr); +} +#else +static inline void sdio_acpi_set_handle(struct sdio_func *func) {} +#endif + +static void sdio_set_of_node(struct sdio_func *func) +{ + struct mmc_host *host = func->card->host; + + func->dev.of_node = mmc_of_find_child_device(host, func->num); +} + +/* + * Register a new SDIO function with the driver model. + */ +int sdio_add_func(struct sdio_func *func) +{ + int ret; + + dev_set_name(&func->dev, "%s:%d", mmc_card_id(func->card), func->num); + + sdio_set_of_node(func); + sdio_acpi_set_handle(func); + device_enable_async_suspend(&func->dev); + ret = device_add(&func->dev); + if (ret == 0) + sdio_func_set_present(func); + + return ret; +} + +/* + * Unregister a SDIO function with the driver model, and + * (eventually) free it. + * This function can be called through error paths where sdio_add_func() was + * never executed (because a failure occurred at an earlier point). + */ +void sdio_remove_func(struct sdio_func *func) +{ + if (sdio_func_present(func)) + device_del(&func->dev); + + of_node_put(func->dev.of_node); + put_device(&func->dev); +} + diff --git a/drivers/mmc/core/sdio_bus.h b/drivers/mmc/core/sdio_bus.h new file mode 100644 index 000000000..27b8069a7 --- /dev/null +++ b/drivers/mmc/core/sdio_bus.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * linux/drivers/mmc/core/sdio_bus.h + * + * Copyright 2007 Pierre Ossman + */ +#ifndef _MMC_CORE_SDIO_BUS_H +#define _MMC_CORE_SDIO_BUS_H + +struct mmc_card; +struct sdio_func; + +struct sdio_func *sdio_alloc_func(struct mmc_card *card); +int sdio_add_func(struct sdio_func *func); +void sdio_remove_func(struct sdio_func *func); + +int sdio_register_bus(void); +void sdio_unregister_bus(void); + +#endif + diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c new file mode 100644 index 000000000..ce524f7e1 --- /dev/null +++ b/drivers/mmc/core/sdio_cis.c @@ -0,0 +1,420 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * linux/drivers/mmc/core/sdio_cis.c + * + * Author: Nicolas Pitre + * Created: June 11, 2007 + * Copyright: MontaVista Software Inc. + * + * Copyright 2007 Pierre Ossman + */ + +#include <linux/kernel.h> +#include <linux/slab.h> + +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/sdio_func.h> + +#include "sdio_cis.h" +#include "sdio_ops.h" + +#define SDIO_READ_CIS_TIMEOUT_MS (10 * 1000) /* 10s */ + +static int cistpl_vers_1(struct mmc_card *card, struct sdio_func *func, + const unsigned char *buf, unsigned size) +{ + u8 major_rev, minor_rev; + unsigned i, nr_strings; + char **buffer, *string; + + if (size < 2) + return 0; + + major_rev = buf[0]; + minor_rev = buf[1]; + + /* Find all null-terminated (including zero length) strings in + the TPLLV1_INFO field. Trailing garbage is ignored. */ + buf += 2; + size -= 2; + + nr_strings = 0; + for (i = 0; i < size; i++) { + if (buf[i] == 0xff) + break; + if (buf[i] == 0) + nr_strings++; + } + if (nr_strings == 0) + return 0; + + size = i; + + buffer = kzalloc(sizeof(char*) * nr_strings + size, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + string = (char*)(buffer + nr_strings); + + for (i = 0; i < nr_strings; i++) { + buffer[i] = string; + strcpy(string, buf); + string += strlen(string) + 1; + buf += strlen(buf) + 1; + } + + if (func) { + func->major_rev = major_rev; + func->minor_rev = minor_rev; + func->num_info = nr_strings; + func->info = (const char**)buffer; + } else { + card->major_rev = major_rev; + card->minor_rev = minor_rev; + card->num_info = nr_strings; + card->info = (const char**)buffer; + } + + return 0; +} + +static int cistpl_manfid(struct mmc_card *card, struct sdio_func *func, + const unsigned char *buf, unsigned size) +{ + unsigned int vendor, device; + + /* TPLMID_MANF */ + vendor = buf[0] | (buf[1] << 8); + + /* TPLMID_CARD */ + device = buf[2] | (buf[3] << 8); + + if (func) { + func->vendor = vendor; + func->device = device; + } else { + card->cis.vendor = vendor; + card->cis.device = device; + } + + return 0; +} + +static const unsigned char speed_val[16] = + { 0, 10, 12, 13, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80 }; +static const unsigned int speed_unit[8] = + { 10000, 100000, 1000000, 10000000, 0, 0, 0, 0 }; + + +typedef int (tpl_parse_t)(struct mmc_card *, struct sdio_func *, + const unsigned char *, unsigned); + +struct cis_tpl { + unsigned char code; + unsigned char min_size; + tpl_parse_t *parse; +}; + +static int cis_tpl_parse(struct mmc_card *card, struct sdio_func *func, + const char *tpl_descr, + const struct cis_tpl *tpl, int tpl_count, + unsigned char code, + const unsigned char *buf, unsigned size) +{ + int i, ret; + + /* look for a matching code in the table */ + for (i = 0; i < tpl_count; i++, tpl++) { + if (tpl->code == code) + break; + } + if (i < tpl_count) { + if (size >= tpl->min_size) { + if (tpl->parse) + ret = tpl->parse(card, func, buf, size); + else + ret = -EILSEQ; /* known tuple, not parsed */ + } else { + /* invalid tuple */ + ret = -EINVAL; + } + if (ret && ret != -EILSEQ && ret != -ENOENT) { + pr_err("%s: bad %s tuple 0x%02x (%u bytes)\n", + mmc_hostname(card->host), tpl_descr, code, size); + } + } else { + /* unknown tuple */ + ret = -ENOENT; + } + + return ret; +} + +static int cistpl_funce_common(struct mmc_card *card, struct sdio_func *func, + const unsigned char *buf, unsigned size) +{ + /* Only valid for the common CIS (function 0) */ + if (func) + return -EINVAL; + + /* TPLFE_FN0_BLK_SIZE */ + card->cis.blksize = buf[1] | (buf[2] << 8); + + /* TPLFE_MAX_TRAN_SPEED */ + card->cis.max_dtr = speed_val[(buf[3] >> 3) & 15] * + speed_unit[buf[3] & 7]; + + return 0; +} + +static int cistpl_funce_func(struct mmc_card *card, struct sdio_func *func, + const unsigned char *buf, unsigned size) +{ + unsigned vsn; + unsigned min_size; + + /* Only valid for the individual function's CIS (1-7) */ + if (!func) + return -EINVAL; + + /* + * This tuple has a different length depending on the SDIO spec + * version. + */ + vsn = func->card->cccr.sdio_vsn; + min_size = (vsn == SDIO_SDIO_REV_1_00) ? 28 : 42; + + if (size == 28 && vsn == SDIO_SDIO_REV_1_10) { + pr_warn("%s: card has broken SDIO 1.1 CIS, forcing SDIO 1.0\n", + mmc_hostname(card->host)); + vsn = SDIO_SDIO_REV_1_00; + } else if (size < min_size) { + return -EINVAL; + } + + /* TPLFE_MAX_BLK_SIZE */ + func->max_blksize = buf[12] | (buf[13] << 8); + + /* TPLFE_ENABLE_TIMEOUT_VAL, present in ver 1.1 and above */ + if (vsn > SDIO_SDIO_REV_1_00) + func->enable_timeout = (buf[28] | (buf[29] << 8)) * 10; + else + func->enable_timeout = jiffies_to_msecs(HZ); + + return 0; +} + +/* + * Known TPLFE_TYPEs table for CISTPL_FUNCE tuples. + * + * Note that, unlike PCMCIA, CISTPL_FUNCE tuples are not parsed depending + * on the TPLFID_FUNCTION value of the previous CISTPL_FUNCID as on SDIO + * TPLFID_FUNCTION is always hardcoded to 0x0C. + */ +static const struct cis_tpl cis_tpl_funce_list[] = { + { 0x00, 4, cistpl_funce_common }, + { 0x01, 0, cistpl_funce_func }, + { 0x04, 1+1+6, /* CISTPL_FUNCE_LAN_NODE_ID */ }, +}; + +static int cistpl_funce(struct mmc_card *card, struct sdio_func *func, + const unsigned char *buf, unsigned size) +{ + if (size < 1) + return -EINVAL; + + return cis_tpl_parse(card, func, "CISTPL_FUNCE", + cis_tpl_funce_list, + ARRAY_SIZE(cis_tpl_funce_list), + buf[0], buf, size); +} + +/* Known TPL_CODEs table for CIS tuples */ +static const struct cis_tpl cis_tpl_list[] = { + { 0x15, 3, cistpl_vers_1 }, + { 0x20, 4, cistpl_manfid }, + { 0x21, 2, /* cistpl_funcid */ }, + { 0x22, 0, cistpl_funce }, + { 0x91, 2, /* cistpl_sdio_std */ }, +}; + +static int sdio_read_cis(struct mmc_card *card, struct sdio_func *func) +{ + int ret; + struct sdio_func_tuple *this, **prev; + unsigned i, ptr = 0; + + /* + * Note that this works for the common CIS (function number 0) as + * well as a function's CIS * since SDIO_CCCR_CIS and SDIO_FBR_CIS + * have the same offset. + */ + for (i = 0; i < 3; i++) { + unsigned char x, fn; + + if (func) + fn = func->num; + else + fn = 0; + + ret = mmc_io_rw_direct(card, 0, 0, + SDIO_FBR_BASE(fn) + SDIO_FBR_CIS + i, 0, &x); + if (ret) + return ret; + ptr |= x << (i * 8); + } + + if (func) + prev = &func->tuples; + else + prev = &card->tuples; + + if (*prev) + return -EINVAL; + + do { + unsigned char tpl_code, tpl_link; + unsigned long timeout = jiffies + + msecs_to_jiffies(SDIO_READ_CIS_TIMEOUT_MS); + + ret = mmc_io_rw_direct(card, 0, 0, ptr++, 0, &tpl_code); + if (ret) + break; + + /* 0xff means we're done */ + if (tpl_code == 0xff) + break; + + /* null entries have no link field or data */ + if (tpl_code == 0x00) + continue; + + ret = mmc_io_rw_direct(card, 0, 0, ptr++, 0, &tpl_link); + if (ret) + break; + + /* a size of 0xff also means we're done */ + if (tpl_link == 0xff) + break; + + this = kmalloc(sizeof(*this) + tpl_link, GFP_KERNEL); + if (!this) + return -ENOMEM; + + for (i = 0; i < tpl_link; i++) { + ret = mmc_io_rw_direct(card, 0, 0, + ptr + i, 0, &this->data[i]); + if (ret) + break; + } + if (ret) { + kfree(this); + break; + } + + /* Try to parse the CIS tuple */ + ret = cis_tpl_parse(card, func, "CIS", + cis_tpl_list, ARRAY_SIZE(cis_tpl_list), + tpl_code, this->data, tpl_link); + if (ret == -EILSEQ || ret == -ENOENT) { + /* + * The tuple is unknown or known but not parsed. + * Queue the tuple for the function driver. + */ + this->next = NULL; + this->code = tpl_code; + this->size = tpl_link; + *prev = this; + prev = &this->next; + + if (ret == -ENOENT) { + if (time_after(jiffies, timeout)) + break; + /* warn about unknown tuples */ + pr_warn_ratelimited("%s: queuing unknown" + " CIS tuple 0x%02x (%u bytes)\n", + mmc_hostname(card->host), + tpl_code, tpl_link); + } + + /* keep on analyzing tuples */ + ret = 0; + } else { + /* + * We don't need the tuple anymore if it was + * successfully parsed by the SDIO core or if it is + * not going to be queued for a driver. + */ + kfree(this); + } + + ptr += tpl_link; + } while (!ret); + + /* + * Link in all unknown tuples found in the common CIS so that + * drivers don't have to go digging in two places. + */ + if (func) + *prev = card->tuples; + + return ret; +} + +int sdio_read_common_cis(struct mmc_card *card) +{ + return sdio_read_cis(card, NULL); +} + +void sdio_free_common_cis(struct mmc_card *card) +{ + struct sdio_func_tuple *tuple, *victim; + + tuple = card->tuples; + + while (tuple) { + victim = tuple; + tuple = tuple->next; + kfree(victim); + } + + card->tuples = NULL; +} + +int sdio_read_func_cis(struct sdio_func *func) +{ + int ret; + + ret = sdio_read_cis(func->card, func); + if (ret) + return ret; + + /* + * Vendor/device id is optional for function CIS, so + * copy it from the card structure as needed. + */ + if (func->vendor == 0) { + func->vendor = func->card->cis.vendor; + func->device = func->card->cis.device; + } + + return 0; +} + +void sdio_free_func_cis(struct sdio_func *func) +{ + struct sdio_func_tuple *tuple, *victim; + + tuple = func->tuples; + + while (tuple && tuple != func->card->tuples) { + victim = tuple; + tuple = tuple->next; + kfree(victim); + } + + func->tuples = NULL; +} + diff --git a/drivers/mmc/core/sdio_cis.h b/drivers/mmc/core/sdio_cis.h new file mode 100644 index 000000000..6d76f6fa6 --- /dev/null +++ b/drivers/mmc/core/sdio_cis.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * linux/drivers/mmc/core/sdio_cis.h + * + * Author: Nicolas Pitre + * Created: June 11, 2007 + * Copyright: MontaVista Software Inc. + */ + +#ifndef _MMC_SDIO_CIS_H +#define _MMC_SDIO_CIS_H + +struct mmc_card; +struct sdio_func; + +int sdio_read_common_cis(struct mmc_card *card); +void sdio_free_common_cis(struct mmc_card *card); + +int sdio_read_func_cis(struct sdio_func *func); +void sdio_free_func_cis(struct sdio_func *func); + +#endif diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c new file mode 100644 index 000000000..79dbf9021 --- /dev/null +++ b/drivers/mmc/core/sdio_io.c @@ -0,0 +1,814 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * linux/drivers/mmc/core/sdio_io.c + * + * Copyright 2007-2008 Pierre Ossman + */ + +#include <linux/export.h> +#include <linux/kernel.h> +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/sdio_func.h> + +#include "sdio_ops.h" +#include "core.h" +#include "card.h" +#include "host.h" + +/** + * sdio_claim_host - exclusively claim a bus for a certain SDIO function + * @func: SDIO function that will be accessed + * + * Claim a bus for a set of operations. The SDIO function given + * is used to figure out which bus is relevant. + */ +void sdio_claim_host(struct sdio_func *func) +{ + if (WARN_ON(!func)) + return; + + mmc_claim_host(func->card->host); +} +EXPORT_SYMBOL_GPL(sdio_claim_host); + +/** + * sdio_release_host - release a bus for a certain SDIO function + * @func: SDIO function that was accessed + * + * Release a bus, allowing others to claim the bus for their + * operations. + */ +void sdio_release_host(struct sdio_func *func) +{ + if (WARN_ON(!func)) + return; + + mmc_release_host(func->card->host); +} +EXPORT_SYMBOL_GPL(sdio_release_host); + +/** + * sdio_enable_func - enables a SDIO function for usage + * @func: SDIO function to enable + * + * Powers up and activates a SDIO function so that register + * access is possible. + */ +int sdio_enable_func(struct sdio_func *func) +{ + int ret; + unsigned char reg; + unsigned long timeout; + + if (!func) + return -EINVAL; + + pr_debug("SDIO: Enabling device %s...\n", sdio_func_id(func)); + + ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IOEx, 0, ®); + if (ret) + goto err; + + reg |= 1 << func->num; + + ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IOEx, reg, NULL); + if (ret) + goto err; + + timeout = jiffies + msecs_to_jiffies(func->enable_timeout); + + while (1) { + ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IORx, 0, ®); + if (ret) + goto err; + if (reg & (1 << func->num)) + break; + ret = -ETIME; + if (time_after(jiffies, timeout)) + goto err; + } + + pr_debug("SDIO: Enabled device %s\n", sdio_func_id(func)); + + return 0; + +err: + pr_debug("SDIO: Failed to enable device %s\n", sdio_func_id(func)); + return ret; +} +EXPORT_SYMBOL_GPL(sdio_enable_func); + +/** + * sdio_disable_func - disable a SDIO function + * @func: SDIO function to disable + * + * Powers down and deactivates a SDIO function. Register access + * to this function will fail until the function is reenabled. + */ +int sdio_disable_func(struct sdio_func *func) +{ + int ret; + unsigned char reg; + + if (!func) + return -EINVAL; + + pr_debug("SDIO: Disabling device %s...\n", sdio_func_id(func)); + + ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IOEx, 0, ®); + if (ret) + goto err; + + reg &= ~(1 << func->num); + + ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IOEx, reg, NULL); + if (ret) + goto err; + + pr_debug("SDIO: Disabled device %s\n", sdio_func_id(func)); + + return 0; + +err: + pr_debug("SDIO: Failed to disable device %s\n", sdio_func_id(func)); + return ret; +} +EXPORT_SYMBOL_GPL(sdio_disable_func); + +/** + * sdio_set_block_size - set the block size of an SDIO function + * @func: SDIO function to change + * @blksz: new block size or 0 to use the default. + * + * The default block size is the largest supported by both the function + * and the host, with a maximum of 512 to ensure that arbitrarily sized + * data transfer use the optimal (least) number of commands. + * + * A driver may call this to override the default block size set by the + * core. This can be used to set a block size greater than the maximum + * that reported by the card; it is the driver's responsibility to ensure + * it uses a value that the card supports. + * + * Returns 0 on success, -EINVAL if the host does not support the + * requested block size, or -EIO (etc.) if one of the resultant FBR block + * size register writes failed. + * + */ +int sdio_set_block_size(struct sdio_func *func, unsigned blksz) +{ + int ret; + + if (blksz > func->card->host->max_blk_size) + return -EINVAL; + + if (blksz == 0) { + blksz = min(func->max_blksize, func->card->host->max_blk_size); + blksz = min(blksz, 512u); + } + + ret = mmc_io_rw_direct(func->card, 1, 0, + SDIO_FBR_BASE(func->num) + SDIO_FBR_BLKSIZE, + blksz & 0xff, NULL); + if (ret) + return ret; + ret = mmc_io_rw_direct(func->card, 1, 0, + SDIO_FBR_BASE(func->num) + SDIO_FBR_BLKSIZE + 1, + (blksz >> 8) & 0xff, NULL); + if (ret) + return ret; + func->cur_blksize = blksz; + return 0; +} +EXPORT_SYMBOL_GPL(sdio_set_block_size); + +/* + * Calculate the maximum byte mode transfer size + */ +static inline unsigned int sdio_max_byte_size(struct sdio_func *func) +{ + unsigned mval = func->card->host->max_blk_size; + + if (mmc_blksz_for_byte_mode(func->card)) + mval = min(mval, func->cur_blksize); + else + mval = min(mval, func->max_blksize); + + if (mmc_card_broken_byte_mode_512(func->card)) + return min(mval, 511u); + + return min(mval, 512u); /* maximum size for byte mode */ +} + +/* + * This is legacy code, which needs to be re-worked some day. Basically we need + * to take into account the properties of the host, as to enable the SDIO func + * driver layer to allocate optimal buffers. + */ +static inline unsigned int _sdio_align_size(unsigned int sz) +{ + /* + * FIXME: We don't have a system for the controller to tell + * the core about its problems yet, so for now we just 32-bit + * align the size. + */ + return ALIGN(sz, 4); +} + +/** + * sdio_align_size - pads a transfer size to a more optimal value + * @func: SDIO function + * @sz: original transfer size + * + * Pads the original data size with a number of extra bytes in + * order to avoid controller bugs and/or performance hits + * (e.g. some controllers revert to PIO for certain sizes). + * + * If possible, it will also adjust the size so that it can be + * handled in just a single request. + * + * Returns the improved size, which might be unmodified. + */ +unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz) +{ + unsigned int orig_sz; + unsigned int blk_sz, byte_sz; + unsigned chunk_sz; + + orig_sz = sz; + + /* + * Do a first check with the controller, in case it + * wants to increase the size up to a point where it + * might need more than one block. + */ + sz = _sdio_align_size(sz); + + /* + * If we can still do this with just a byte transfer, then + * we're done. + */ + if (sz <= sdio_max_byte_size(func)) + return sz; + + if (func->card->cccr.multi_block) { + /* + * Check if the transfer is already block aligned + */ + if ((sz % func->cur_blksize) == 0) + return sz; + + /* + * Realign it so that it can be done with one request, + * and recheck if the controller still likes it. + */ + blk_sz = ((sz + func->cur_blksize - 1) / + func->cur_blksize) * func->cur_blksize; + blk_sz = _sdio_align_size(blk_sz); + + /* + * This value is only good if it is still just + * one request. + */ + if ((blk_sz % func->cur_blksize) == 0) + return blk_sz; + + /* + * We failed to do one request, but at least try to + * pad the remainder properly. + */ + byte_sz = _sdio_align_size(sz % func->cur_blksize); + if (byte_sz <= sdio_max_byte_size(func)) { + blk_sz = sz / func->cur_blksize; + return blk_sz * func->cur_blksize + byte_sz; + } + } else { + /* + * We need multiple requests, so first check that the + * controller can handle the chunk size; + */ + chunk_sz = _sdio_align_size(sdio_max_byte_size(func)); + if (chunk_sz == sdio_max_byte_size(func)) { + /* + * Fix up the size of the remainder (if any) + */ + byte_sz = orig_sz % chunk_sz; + if (byte_sz) { + byte_sz = _sdio_align_size(byte_sz); + } + + return (orig_sz / chunk_sz) * chunk_sz + byte_sz; + } + } + + /* + * The controller is simply incapable of transferring the size + * we want in decent manner, so just return the original size. + */ + return orig_sz; +} +EXPORT_SYMBOL_GPL(sdio_align_size); + +/* Split an arbitrarily sized data transfer into several + * IO_RW_EXTENDED commands. */ +static int sdio_io_rw_ext_helper(struct sdio_func *func, int write, + unsigned addr, int incr_addr, u8 *buf, unsigned size) +{ + unsigned remainder = size; + unsigned max_blocks; + int ret; + + if (!func || (func->num > 7)) + return -EINVAL; + + /* Do the bulk of the transfer using block mode (if supported). */ + if (func->card->cccr.multi_block && (size > sdio_max_byte_size(func))) { + /* Blocks per command is limited by host count, host transfer + * size and the maximum for IO_RW_EXTENDED of 511 blocks. */ + max_blocks = min(func->card->host->max_blk_count, 511u); + + while (remainder >= func->cur_blksize) { + unsigned blocks; + + blocks = remainder / func->cur_blksize; + if (blocks > max_blocks) + blocks = max_blocks; + size = blocks * func->cur_blksize; + + ret = mmc_io_rw_extended(func->card, write, + func->num, addr, incr_addr, buf, + blocks, func->cur_blksize); + if (ret) + return ret; + + remainder -= size; + buf += size; + if (incr_addr) + addr += size; + } + } + + /* Write the remainder using byte mode. */ + while (remainder > 0) { + size = min(remainder, sdio_max_byte_size(func)); + + /* Indicate byte mode by setting "blocks" = 0 */ + ret = mmc_io_rw_extended(func->card, write, func->num, addr, + incr_addr, buf, 0, size); + if (ret) + return ret; + + remainder -= size; + buf += size; + if (incr_addr) + addr += size; + } + return 0; +} + +/** + * sdio_readb - read a single byte from a SDIO function + * @func: SDIO function to access + * @addr: address to read + * @err_ret: optional status value from transfer + * + * Reads a single byte from the address space of a given SDIO + * function. If there is a problem reading the address, 0xff + * is returned and @err_ret will contain the error code. + */ +u8 sdio_readb(struct sdio_func *func, unsigned int addr, int *err_ret) +{ + int ret; + u8 val; + + if (!func) { + if (err_ret) + *err_ret = -EINVAL; + return 0xFF; + } + + ret = mmc_io_rw_direct(func->card, 0, func->num, addr, 0, &val); + if (err_ret) + *err_ret = ret; + if (ret) + return 0xFF; + + return val; +} +EXPORT_SYMBOL_GPL(sdio_readb); + +/** + * sdio_writeb - write a single byte to a SDIO function + * @func: SDIO function to access + * @b: byte to write + * @addr: address to write to + * @err_ret: optional status value from transfer + * + * Writes a single byte to the address space of a given SDIO + * function. @err_ret will contain the status of the actual + * transfer. + */ +void sdio_writeb(struct sdio_func *func, u8 b, unsigned int addr, int *err_ret) +{ + int ret; + + if (!func) { + if (err_ret) + *err_ret = -EINVAL; + return; + } + + ret = mmc_io_rw_direct(func->card, 1, func->num, addr, b, NULL); + if (err_ret) + *err_ret = ret; +} +EXPORT_SYMBOL_GPL(sdio_writeb); + +/** + * sdio_writeb_readb - write and read a byte from SDIO function + * @func: SDIO function to access + * @write_byte: byte to write + * @addr: address to write to + * @err_ret: optional status value from transfer + * + * Performs a RAW (Read after Write) operation as defined by SDIO spec - + * single byte is written to address space of a given SDIO function and + * response is read back from the same address, both using single request. + * If there is a problem with the operation, 0xff is returned and + * @err_ret will contain the error code. + */ +u8 sdio_writeb_readb(struct sdio_func *func, u8 write_byte, + unsigned int addr, int *err_ret) +{ + int ret; + u8 val; + + ret = mmc_io_rw_direct(func->card, 1, func->num, addr, + write_byte, &val); + if (err_ret) + *err_ret = ret; + if (ret) + return 0xff; + + return val; +} +EXPORT_SYMBOL_GPL(sdio_writeb_readb); + +/** + * sdio_memcpy_fromio - read a chunk of memory from a SDIO function + * @func: SDIO function to access + * @dst: buffer to store the data + * @addr: address to begin reading from + * @count: number of bytes to read + * + * Reads from the address space of a given SDIO function. Return + * value indicates if the transfer succeeded or not. + */ +int sdio_memcpy_fromio(struct sdio_func *func, void *dst, + unsigned int addr, int count) +{ + return sdio_io_rw_ext_helper(func, 0, addr, 1, dst, count); +} +EXPORT_SYMBOL_GPL(sdio_memcpy_fromio); + +/** + * sdio_memcpy_toio - write a chunk of memory to a SDIO function + * @func: SDIO function to access + * @addr: address to start writing to + * @src: buffer that contains the data to write + * @count: number of bytes to write + * + * Writes to the address space of a given SDIO function. Return + * value indicates if the transfer succeeded or not. + */ +int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr, + void *src, int count) +{ + return sdio_io_rw_ext_helper(func, 1, addr, 1, src, count); +} +EXPORT_SYMBOL_GPL(sdio_memcpy_toio); + +/** + * sdio_readsb - read from a FIFO on a SDIO function + * @func: SDIO function to access + * @dst: buffer to store the data + * @addr: address of (single byte) FIFO + * @count: number of bytes to read + * + * Reads from the specified FIFO of a given SDIO function. Return + * value indicates if the transfer succeeded or not. + */ +int sdio_readsb(struct sdio_func *func, void *dst, unsigned int addr, + int count) +{ + return sdio_io_rw_ext_helper(func, 0, addr, 0, dst, count); +} +EXPORT_SYMBOL_GPL(sdio_readsb); + +/** + * sdio_writesb - write to a FIFO of a SDIO function + * @func: SDIO function to access + * @addr: address of (single byte) FIFO + * @src: buffer that contains the data to write + * @count: number of bytes to write + * + * Writes to the specified FIFO of a given SDIO function. Return + * value indicates if the transfer succeeded or not. + */ +int sdio_writesb(struct sdio_func *func, unsigned int addr, void *src, + int count) +{ + return sdio_io_rw_ext_helper(func, 1, addr, 0, src, count); +} +EXPORT_SYMBOL_GPL(sdio_writesb); + +/** + * sdio_readw - read a 16 bit integer from a SDIO function + * @func: SDIO function to access + * @addr: address to read + * @err_ret: optional status value from transfer + * + * Reads a 16 bit integer from the address space of a given SDIO + * function. If there is a problem reading the address, 0xffff + * is returned and @err_ret will contain the error code. + */ +u16 sdio_readw(struct sdio_func *func, unsigned int addr, int *err_ret) +{ + int ret; + + ret = sdio_memcpy_fromio(func, func->tmpbuf, addr, 2); + if (err_ret) + *err_ret = ret; + if (ret) + return 0xFFFF; + + return le16_to_cpup((__le16 *)func->tmpbuf); +} +EXPORT_SYMBOL_GPL(sdio_readw); + +/** + * sdio_writew - write a 16 bit integer to a SDIO function + * @func: SDIO function to access + * @b: integer to write + * @addr: address to write to + * @err_ret: optional status value from transfer + * + * Writes a 16 bit integer to the address space of a given SDIO + * function. @err_ret will contain the status of the actual + * transfer. + */ +void sdio_writew(struct sdio_func *func, u16 b, unsigned int addr, int *err_ret) +{ + int ret; + + *(__le16 *)func->tmpbuf = cpu_to_le16(b); + + ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 2); + if (err_ret) + *err_ret = ret; +} +EXPORT_SYMBOL_GPL(sdio_writew); + +/** + * sdio_readl - read a 32 bit integer from a SDIO function + * @func: SDIO function to access + * @addr: address to read + * @err_ret: optional status value from transfer + * + * Reads a 32 bit integer from the address space of a given SDIO + * function. If there is a problem reading the address, + * 0xffffffff is returned and @err_ret will contain the error + * code. + */ +u32 sdio_readl(struct sdio_func *func, unsigned int addr, int *err_ret) +{ + int ret; + + ret = sdio_memcpy_fromio(func, func->tmpbuf, addr, 4); + if (err_ret) + *err_ret = ret; + if (ret) + return 0xFFFFFFFF; + + return le32_to_cpup((__le32 *)func->tmpbuf); +} +EXPORT_SYMBOL_GPL(sdio_readl); + +/** + * sdio_writel - write a 32 bit integer to a SDIO function + * @func: SDIO function to access + * @b: integer to write + * @addr: address to write to + * @err_ret: optional status value from transfer + * + * Writes a 32 bit integer to the address space of a given SDIO + * function. @err_ret will contain the status of the actual + * transfer. + */ +void sdio_writel(struct sdio_func *func, u32 b, unsigned int addr, int *err_ret) +{ + int ret; + + *(__le32 *)func->tmpbuf = cpu_to_le32(b); + + ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 4); + if (err_ret) + *err_ret = ret; +} +EXPORT_SYMBOL_GPL(sdio_writel); + +/** + * sdio_f0_readb - read a single byte from SDIO function 0 + * @func: an SDIO function of the card + * @addr: address to read + * @err_ret: optional status value from transfer + * + * Reads a single byte from the address space of SDIO function 0. + * If there is a problem reading the address, 0xff is returned + * and @err_ret will contain the error code. + */ +unsigned char sdio_f0_readb(struct sdio_func *func, unsigned int addr, + int *err_ret) +{ + int ret; + unsigned char val; + + if (!func) { + if (err_ret) + *err_ret = -EINVAL; + return 0xFF; + } + + ret = mmc_io_rw_direct(func->card, 0, 0, addr, 0, &val); + if (err_ret) + *err_ret = ret; + if (ret) + return 0xFF; + + return val; +} +EXPORT_SYMBOL_GPL(sdio_f0_readb); + +/** + * sdio_f0_writeb - write a single byte to SDIO function 0 + * @func: an SDIO function of the card + * @b: byte to write + * @addr: address to write to + * @err_ret: optional status value from transfer + * + * Writes a single byte to the address space of SDIO function 0. + * @err_ret will contain the status of the actual transfer. + * + * Only writes to the vendor specific CCCR registers (0xF0 - + * 0xFF) are permiited; @err_ret will be set to -EINVAL for * + * writes outside this range. + */ +void sdio_f0_writeb(struct sdio_func *func, unsigned char b, unsigned int addr, + int *err_ret) +{ + int ret; + + if (!func) { + if (err_ret) + *err_ret = -EINVAL; + return; + } + + if ((addr < 0xF0 || addr > 0xFF) && (!mmc_card_lenient_fn0(func->card))) { + if (err_ret) + *err_ret = -EINVAL; + return; + } + + ret = mmc_io_rw_direct(func->card, 1, 0, addr, b, NULL); + if (err_ret) + *err_ret = ret; +} +EXPORT_SYMBOL_GPL(sdio_f0_writeb); + +/** + * sdio_get_host_pm_caps - get host power management capabilities + * @func: SDIO function attached to host + * + * Returns a capability bitmask corresponding to power management + * features supported by the host controller that the card function + * might rely upon during a system suspend. The host doesn't need + * to be claimed, nor the function active, for this information to be + * obtained. + */ +mmc_pm_flag_t sdio_get_host_pm_caps(struct sdio_func *func) +{ + if (!func) + return 0; + + return func->card->host->pm_caps; +} +EXPORT_SYMBOL_GPL(sdio_get_host_pm_caps); + +/** + * sdio_set_host_pm_flags - set wanted host power management capabilities + * @func: SDIO function attached to host + * @flags: Power Management flags to set + * + * Set a capability bitmask corresponding to wanted host controller + * power management features for the upcoming suspend state. + * This must be called, if needed, each time the suspend method of + * the function driver is called, and must contain only bits that + * were returned by sdio_get_host_pm_caps(). + * The host doesn't need to be claimed, nor the function active, + * for this information to be set. + */ +int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags) +{ + struct mmc_host *host; + + if (!func) + return -EINVAL; + + host = func->card->host; + + if (flags & ~host->pm_caps) + return -EINVAL; + + /* function suspend methods are serialized, hence no lock needed */ + host->pm_flags |= flags; + return 0; +} +EXPORT_SYMBOL_GPL(sdio_set_host_pm_flags); + +/** + * sdio_retune_crc_disable - temporarily disable retuning on CRC errors + * @func: SDIO function attached to host + * + * If the SDIO card is known to be in a state where it might produce + * CRC errors on the bus in response to commands (like if we know it is + * transitioning between power states), an SDIO function driver can + * call this function to temporarily disable the SD/MMC core behavior of + * triggering an automatic retuning. + * + * This function should be called while the host is claimed and the host + * should remain claimed until sdio_retune_crc_enable() is called. + * Specifically, the expected sequence of calls is: + * - sdio_claim_host() + * - sdio_retune_crc_disable() + * - some number of calls like sdio_writeb() and sdio_readb() + * - sdio_retune_crc_enable() + * - sdio_release_host() + */ +void sdio_retune_crc_disable(struct sdio_func *func) +{ + func->card->host->retune_crc_disable = true; +} +EXPORT_SYMBOL_GPL(sdio_retune_crc_disable); + +/** + * sdio_retune_crc_enable - re-enable retuning on CRC errors + * @func: SDIO function attached to host + * + * This is the compement to sdio_retune_crc_disable(). + */ +void sdio_retune_crc_enable(struct sdio_func *func) +{ + func->card->host->retune_crc_disable = false; +} +EXPORT_SYMBOL_GPL(sdio_retune_crc_enable); + +/** + * sdio_retune_hold_now - start deferring retuning requests till release + * @func: SDIO function attached to host + * + * This function can be called if it's currently a bad time to do + * a retune of the SDIO card. Retune requests made during this time + * will be held and we'll actually do the retune sometime after the + * release. + * + * This function could be useful if an SDIO card is in a power state + * where it can respond to a small subset of commands that doesn't + * include the retuning command. Care should be taken when using + * this function since (presumably) the retuning request we might be + * deferring was made for a good reason. + * + * This function should be called while the host is claimed. + */ +void sdio_retune_hold_now(struct sdio_func *func) +{ + mmc_retune_hold_now(func->card->host); +} +EXPORT_SYMBOL_GPL(sdio_retune_hold_now); + +/** + * sdio_retune_release - signal that it's OK to retune now + * @func: SDIO function attached to host + * + * This is the complement to sdio_retune_hold_now(). Calling this + * function won't make a retune happen right away but will allow + * them to be scheduled normally. + * + * This function should be called while the host is claimed. + */ +void sdio_retune_release(struct sdio_func *func) +{ + mmc_retune_release(func->card->host); +} +EXPORT_SYMBOL_GPL(sdio_retune_release); diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c new file mode 100644 index 000000000..4b1f7c966 --- /dev/null +++ b/drivers/mmc/core/sdio_irq.c @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * linux/drivers/mmc/core/sdio_irq.c + * + * Author: Nicolas Pitre + * Created: June 18, 2007 + * Copyright: MontaVista Software Inc. + * + * Copyright 2008 Pierre Ossman + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <uapi/linux/sched/types.h> +#include <linux/kthread.h> +#include <linux/export.h> +#include <linux/wait.h> +#include <linux/delay.h> + +#include <linux/mmc/core.h> +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/sdio_func.h> + +#include "sdio_ops.h" +#include "core.h" +#include "card.h" + +static int sdio_get_pending_irqs(struct mmc_host *host, u8 *pending) +{ + struct mmc_card *card = host->card; + int ret; + + WARN_ON(!host->claimed); + + ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTx, 0, pending); + if (ret) { + pr_debug("%s: error %d reading SDIO_CCCR_INTx\n", + mmc_card_id(card), ret); + return ret; + } + + if (*pending && mmc_card_broken_irq_polling(card) && + !(host->caps & MMC_CAP_SDIO_IRQ)) { + unsigned char dummy; + + /* A fake interrupt could be created when we poll SDIO_CCCR_INTx + * register with a Marvell SD8797 card. A dummy CMD52 read to + * function 0 register 0xff can avoid this. + */ + mmc_io_rw_direct(card, 0, 0, 0xff, 0, &dummy); + } + + return 0; +} + +static int process_sdio_pending_irqs(struct mmc_host *host) +{ + struct mmc_card *card = host->card; + int i, ret, count; + bool sdio_irq_pending = host->sdio_irq_pending; + unsigned char pending; + struct sdio_func *func; + + /* Don't process SDIO IRQs if the card is suspended. */ + if (mmc_card_suspended(card)) + return 0; + + /* Clear the flag to indicate that we have processed the IRQ. */ + host->sdio_irq_pending = false; + + /* + * Optimization, if there is only 1 function interrupt registered + * and we know an IRQ was signaled then call irq handler directly. + * Otherwise do the full probe. + */ + func = card->sdio_single_irq; + if (func && sdio_irq_pending) { + func->irq_handler(func); + return 1; + } + + ret = sdio_get_pending_irqs(host, &pending); + if (ret) + return ret; + + count = 0; + for (i = 1; i <= 7; i++) { + if (pending & (1 << i)) { + func = card->sdio_func[i - 1]; + if (!func) { + pr_warn("%s: pending IRQ for non-existent function\n", + mmc_card_id(card)); + ret = -EINVAL; + } else if (func->irq_handler) { + func->irq_handler(func); + count++; + } else { + pr_warn("%s: pending IRQ with no handler\n", + sdio_func_id(func)); + ret = -EINVAL; + } + } + } + + if (count) + return count; + + return ret; +} + +static void sdio_run_irqs(struct mmc_host *host) +{ + mmc_claim_host(host); + if (host->sdio_irqs) { + process_sdio_pending_irqs(host); + if (!host->sdio_irq_pending) + host->ops->ack_sdio_irq(host); + } + mmc_release_host(host); +} + +void sdio_irq_work(struct work_struct *work) +{ + struct mmc_host *host = + container_of(work, struct mmc_host, sdio_irq_work.work); + + sdio_run_irqs(host); +} + +void sdio_signal_irq(struct mmc_host *host) +{ + host->sdio_irq_pending = true; + queue_delayed_work(system_wq, &host->sdio_irq_work, 0); +} +EXPORT_SYMBOL_GPL(sdio_signal_irq); + +static int sdio_irq_thread(void *_host) +{ + struct mmc_host *host = _host; + unsigned long period, idle_period; + int ret; + + sched_set_fifo_low(current); + + /* + * We want to allow for SDIO cards to work even on non SDIO + * aware hosts. One thing that non SDIO host cannot do is + * asynchronous notification of pending SDIO card interrupts + * hence we poll for them in that case. + */ + idle_period = msecs_to_jiffies(10); + period = (host->caps & MMC_CAP_SDIO_IRQ) ? + MAX_SCHEDULE_TIMEOUT : idle_period; + + pr_debug("%s: IRQ thread started (poll period = %lu jiffies)\n", + mmc_hostname(host), period); + + do { + /* + * We claim the host here on drivers behalf for a couple + * reasons: + * + * 1) it is already needed to retrieve the CCCR_INTx; + * 2) we want the driver(s) to clear the IRQ condition ASAP; + * 3) we need to control the abort condition locally. + * + * Just like traditional hard IRQ handlers, we expect SDIO + * IRQ handlers to be quick and to the point, so that the + * holding of the host lock does not cover too much work + * that doesn't require that lock to be held. + */ + ret = __mmc_claim_host(host, NULL, + &host->sdio_irq_thread_abort); + if (ret) + break; + ret = process_sdio_pending_irqs(host); + mmc_release_host(host); + + /* + * Give other threads a chance to run in the presence of + * errors. + */ + if (ret < 0) { + set_current_state(TASK_INTERRUPTIBLE); + if (!kthread_should_stop()) + schedule_timeout(HZ); + set_current_state(TASK_RUNNING); + } + + /* + * Adaptive polling frequency based on the assumption + * that an interrupt will be closely followed by more. + * This has a substantial benefit for network devices. + */ + if (!(host->caps & MMC_CAP_SDIO_IRQ)) { + if (ret > 0) + period /= 2; + else { + period++; + if (period > idle_period) + period = idle_period; + } + } + + set_current_state(TASK_INTERRUPTIBLE); + if (host->caps & MMC_CAP_SDIO_IRQ) + host->ops->enable_sdio_irq(host, 1); + if (!kthread_should_stop()) + schedule_timeout(period); + set_current_state(TASK_RUNNING); + } while (!kthread_should_stop()); + + if (host->caps & MMC_CAP_SDIO_IRQ) + host->ops->enable_sdio_irq(host, 0); + + pr_debug("%s: IRQ thread exiting with code %d\n", + mmc_hostname(host), ret); + + return ret; +} + +static int sdio_card_irq_get(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + + WARN_ON(!host->claimed); + + if (!host->sdio_irqs++) { + if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) { + atomic_set(&host->sdio_irq_thread_abort, 0); + host->sdio_irq_thread = + kthread_run(sdio_irq_thread, host, + "ksdioirqd/%s", mmc_hostname(host)); + if (IS_ERR(host->sdio_irq_thread)) { + int err = PTR_ERR(host->sdio_irq_thread); + host->sdio_irqs--; + return err; + } + } else if (host->caps & MMC_CAP_SDIO_IRQ) { + host->ops->enable_sdio_irq(host, 1); + } + } + + return 0; +} + +static int sdio_card_irq_put(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + + WARN_ON(!host->claimed); + + if (host->sdio_irqs < 1) + return -EINVAL; + + if (!--host->sdio_irqs) { + if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) { + atomic_set(&host->sdio_irq_thread_abort, 1); + kthread_stop(host->sdio_irq_thread); + } else if (host->caps & MMC_CAP_SDIO_IRQ) { + host->ops->enable_sdio_irq(host, 0); + } + } + + return 0; +} + +/* If there is only 1 function registered set sdio_single_irq */ +static void sdio_single_irq_set(struct mmc_card *card) +{ + struct sdio_func *func; + int i; + + card->sdio_single_irq = NULL; + if ((card->host->caps & MMC_CAP_SDIO_IRQ) && + card->host->sdio_irqs == 1) { + for (i = 0; i < card->sdio_funcs; i++) { + func = card->sdio_func[i]; + if (func && func->irq_handler) { + card->sdio_single_irq = func; + break; + } + } + } +} + +/** + * sdio_claim_irq - claim the IRQ for a SDIO function + * @func: SDIO function + * @handler: IRQ handler callback + * + * Claim and activate the IRQ for the given SDIO function. The provided + * handler will be called when that IRQ is asserted. The host is always + * claimed already when the handler is called so the handler should not + * call sdio_claim_host() or sdio_release_host(). + */ +int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler) +{ + int ret; + unsigned char reg; + + if (!func) + return -EINVAL; + + pr_debug("SDIO: Enabling IRQ for %s...\n", sdio_func_id(func)); + + if (func->irq_handler) { + pr_debug("SDIO: IRQ for %s already in use.\n", sdio_func_id(func)); + return -EBUSY; + } + + ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IENx, 0, ®); + if (ret) + return ret; + + reg |= 1 << func->num; + + reg |= 1; /* Master interrupt enable */ + + ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IENx, reg, NULL); + if (ret) + return ret; + + func->irq_handler = handler; + ret = sdio_card_irq_get(func->card); + if (ret) + func->irq_handler = NULL; + sdio_single_irq_set(func->card); + + return ret; +} +EXPORT_SYMBOL_GPL(sdio_claim_irq); + +/** + * sdio_release_irq - release the IRQ for a SDIO function + * @func: SDIO function + * + * Disable and release the IRQ for the given SDIO function. + */ +int sdio_release_irq(struct sdio_func *func) +{ + int ret; + unsigned char reg; + + if (!func) + return -EINVAL; + + pr_debug("SDIO: Disabling IRQ for %s...\n", sdio_func_id(func)); + + if (func->irq_handler) { + func->irq_handler = NULL; + sdio_card_irq_put(func->card); + sdio_single_irq_set(func->card); + } + + ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IENx, 0, ®); + if (ret) + return ret; + + reg &= ~(1 << func->num); + + /* Disable master interrupt with the last function interrupt */ + if (!(reg & 0xFE)) + reg = 0; + + ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IENx, reg, NULL); + if (ret) + return ret; + + return 0; +} +EXPORT_SYMBOL_GPL(sdio_release_irq); + diff --git a/drivers/mmc/core/sdio_ops.c b/drivers/mmc/core/sdio_ops.c new file mode 100644 index 000000000..4c229dd2b --- /dev/null +++ b/drivers/mmc/core/sdio_ops.c @@ -0,0 +1,217 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * linux/drivers/mmc/sdio_ops.c + * + * Copyright 2006-2007 Pierre Ossman + */ + +#include <linux/scatterlist.h> + +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sdio.h> + +#include "core.h" +#include "sdio_ops.h" + +int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) +{ + struct mmc_command cmd = {}; + int i, err = 0; + + cmd.opcode = SD_IO_SEND_OP_COND; + cmd.arg = ocr; + cmd.flags = MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR; + + for (i = 100; i; i--) { + err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); + if (err) + break; + + /* if we're just probing, do a single pass */ + if (ocr == 0) + break; + + /* otherwise wait until reset completes */ + if (mmc_host_is_spi(host)) { + /* + * Both R1_SPI_IDLE and MMC_CARD_BUSY indicate + * an initialized card under SPI, but some cards + * (Marvell's) only behave when looking at this + * one. + */ + if (cmd.resp[1] & MMC_CARD_BUSY) + break; + } else { + if (cmd.resp[0] & MMC_CARD_BUSY) + break; + } + + err = -ETIMEDOUT; + + mmc_delay(10); + } + + if (rocr) + *rocr = cmd.resp[mmc_host_is_spi(host) ? 1 : 0]; + + return err; +} + +static int mmc_io_rw_direct_host(struct mmc_host *host, int write, unsigned fn, + unsigned addr, u8 in, u8 *out) +{ + struct mmc_command cmd = {}; + int err; + + if (fn > 7) + return -EINVAL; + + /* sanity check */ + if (addr & ~0x1FFFF) + return -EINVAL; + + cmd.opcode = SD_IO_RW_DIRECT; + cmd.arg = write ? 0x80000000 : 0x00000000; + cmd.arg |= fn << 28; + cmd.arg |= (write && out) ? 0x08000000 : 0x00000000; + cmd.arg |= addr << 9; + cmd.arg |= in; + cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC; + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) + return err; + + if (mmc_host_is_spi(host)) { + /* host driver already reported errors */ + } else { + if (cmd.resp[0] & R5_ERROR) + return -EIO; + if (cmd.resp[0] & R5_FUNCTION_NUMBER) + return -EINVAL; + if (cmd.resp[0] & R5_OUT_OF_RANGE) + return -ERANGE; + } + + if (out) { + if (mmc_host_is_spi(host)) + *out = (cmd.resp[0] >> 8) & 0xFF; + else + *out = cmd.resp[0] & 0xFF; + } + + return 0; +} + +int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn, + unsigned addr, u8 in, u8 *out) +{ + return mmc_io_rw_direct_host(card->host, write, fn, addr, in, out); +} + +int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn, + unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz) +{ + struct mmc_request mrq = {}; + struct mmc_command cmd = {}; + struct mmc_data data = {}; + struct scatterlist sg, *sg_ptr; + struct sg_table sgtable; + unsigned int nents, left_size, i; + unsigned int seg_size = card->host->max_seg_size; + int err; + + WARN_ON(blksz == 0); + + /* sanity check */ + if (addr & ~0x1FFFF) + return -EINVAL; + + mrq.cmd = &cmd; + mrq.data = &data; + + cmd.opcode = SD_IO_RW_EXTENDED; + cmd.arg = write ? 0x80000000 : 0x00000000; + cmd.arg |= fn << 28; + cmd.arg |= incr_addr ? 0x04000000 : 0x00000000; + cmd.arg |= addr << 9; + if (blocks == 0) + cmd.arg |= (blksz == 512) ? 0 : blksz; /* byte mode */ + else + cmd.arg |= 0x08000000 | blocks; /* block mode */ + cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC; + + data.blksz = blksz; + /* Code in host drivers/fwk assumes that "blocks" always is >=1 */ + data.blocks = blocks ? blocks : 1; + data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ; + + left_size = data.blksz * data.blocks; + nents = DIV_ROUND_UP(left_size, seg_size); + if (nents > 1) { + if (sg_alloc_table(&sgtable, nents, GFP_KERNEL)) + return -ENOMEM; + + data.sg = sgtable.sgl; + data.sg_len = nents; + + for_each_sg(data.sg, sg_ptr, data.sg_len, i) { + sg_set_buf(sg_ptr, buf + i * seg_size, + min(seg_size, left_size)); + left_size -= seg_size; + } + } else { + data.sg = &sg; + data.sg_len = 1; + + sg_init_one(&sg, buf, left_size); + } + + mmc_set_data_timeout(&data, card); + + mmc_pre_req(card->host, &mrq); + + mmc_wait_for_req(card->host, &mrq); + + if (cmd.error) + err = cmd.error; + else if (data.error) + err = data.error; + else if (mmc_host_is_spi(card->host)) + /* host driver already reported errors */ + err = 0; + else if (cmd.resp[0] & R5_ERROR) + err = -EIO; + else if (cmd.resp[0] & R5_FUNCTION_NUMBER) + err = -EINVAL; + else if (cmd.resp[0] & R5_OUT_OF_RANGE) + err = -ERANGE; + else + err = 0; + + mmc_post_req(card->host, &mrq, err); + + if (nents > 1) + sg_free_table(&sgtable); + + return err; +} + +int sdio_reset(struct mmc_host *host) +{ + int ret; + u8 abort; + + /* SDIO Simplified Specification V2.0, 4.4 Reset for SDIO */ + + ret = mmc_io_rw_direct_host(host, 0, 0, SDIO_CCCR_ABORT, 0, &abort); + if (ret) + abort = 0x08; + else + abort |= 0x08; + + return mmc_io_rw_direct_host(host, 1, 0, SDIO_CCCR_ABORT, abort, NULL); +} + diff --git a/drivers/mmc/core/sdio_ops.h b/drivers/mmc/core/sdio_ops.h new file mode 100644 index 000000000..37f79732a --- /dev/null +++ b/drivers/mmc/core/sdio_ops.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * linux/drivers/mmc/sdio_ops.c + * + * Copyright 2006-2007 Pierre Ossman + */ + +#ifndef _MMC_SDIO_OPS_H +#define _MMC_SDIO_OPS_H + +#include <linux/types.h> +#include <linux/mmc/sdio.h> + +struct mmc_host; +struct mmc_card; +struct work_struct; + +int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr); +int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn, + unsigned addr, u8 in, u8* out); +int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn, + unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz); +int sdio_reset(struct mmc_host *host); +void sdio_irq_work(struct work_struct *work); + +static inline bool sdio_is_io_busy(u32 opcode, u32 arg) +{ + u32 addr; + + addr = (arg >> 9) & 0x1FFFF; + + return (opcode == SD_IO_RW_EXTENDED || + (opcode == SD_IO_RW_DIRECT && + !(addr == SDIO_CCCR_ABORT || addr == SDIO_CCCR_SUSPEND))); +} + +#endif + diff --git a/drivers/mmc/core/sdio_uart.c b/drivers/mmc/core/sdio_uart.c new file mode 100644 index 000000000..be4067281 --- /dev/null +++ b/drivers/mmc/core/sdio_uart.c @@ -0,0 +1,1183 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * SDIO UART/GPS driver + * + * Based on drivers/serial/8250.c and drivers/serial/serial_core.c + * by Russell King. + * + * Author: Nicolas Pitre + * Created: June 15, 2007 + * Copyright: MontaVista Software, Inc. + */ + +/* + * Note: Although this driver assumes a 16550A-like UART implementation, + * it is not possible to leverage the common 8250/16550 driver, nor the + * core UART infrastructure, as they assumes direct access to the hardware + * registers, often under a spinlock. This is not possible in the SDIO + * context as SDIO access functions must be able to sleep. + * + * Because we need to lock the SDIO host to ensure an exclusive access to + * the card, we simply rely on that lock to also prevent and serialize + * concurrent access to the same port. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/mutex.h> +#include <linux/seq_file.h> +#include <linux/serial_reg.h> +#include <linux/circ_buf.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/kfifo.h> +#include <linux/slab.h> + +#include <linux/mmc/core.h> +#include <linux/mmc/card.h> +#include <linux/mmc/sdio_func.h> +#include <linux/mmc/sdio_ids.h> + + +#define UART_NR 8 /* Number of UARTs this driver can handle */ + + +#define FIFO_SIZE PAGE_SIZE +#define WAKEUP_CHARS 256 + +struct uart_icount { + __u32 cts; + __u32 dsr; + __u32 rng; + __u32 dcd; + __u32 rx; + __u32 tx; + __u32 frame; + __u32 overrun; + __u32 parity; + __u32 brk; +}; + +struct sdio_uart_port { + struct tty_port port; + unsigned int index; + struct sdio_func *func; + struct mutex func_lock; + struct task_struct *in_sdio_uart_irq; + unsigned int regs_offset; + struct kfifo xmit_fifo; + spinlock_t write_lock; + struct uart_icount icount; + unsigned int uartclk; + unsigned int mctrl; + unsigned int rx_mctrl; + unsigned int read_status_mask; + unsigned int ignore_status_mask; + unsigned char x_char; + unsigned char ier; + unsigned char lcr; +}; + +static struct sdio_uart_port *sdio_uart_table[UART_NR]; +static DEFINE_SPINLOCK(sdio_uart_table_lock); + +static int sdio_uart_add_port(struct sdio_uart_port *port) +{ + int index, ret = -EBUSY; + + mutex_init(&port->func_lock); + spin_lock_init(&port->write_lock); + if (kfifo_alloc(&port->xmit_fifo, FIFO_SIZE, GFP_KERNEL)) + return -ENOMEM; + + spin_lock(&sdio_uart_table_lock); + for (index = 0; index < UART_NR; index++) { + if (!sdio_uart_table[index]) { + port->index = index; + sdio_uart_table[index] = port; + ret = 0; + break; + } + } + spin_unlock(&sdio_uart_table_lock); + + return ret; +} + +static struct sdio_uart_port *sdio_uart_port_get(unsigned index) +{ + struct sdio_uart_port *port; + + if (index >= UART_NR) + return NULL; + + spin_lock(&sdio_uart_table_lock); + port = sdio_uart_table[index]; + if (port) + tty_port_get(&port->port); + spin_unlock(&sdio_uart_table_lock); + + return port; +} + +static void sdio_uart_port_put(struct sdio_uart_port *port) +{ + tty_port_put(&port->port); +} + +static void sdio_uart_port_remove(struct sdio_uart_port *port) +{ + struct sdio_func *func; + + spin_lock(&sdio_uart_table_lock); + sdio_uart_table[port->index] = NULL; + spin_unlock(&sdio_uart_table_lock); + + /* + * We're killing a port that potentially still is in use by + * the tty layer. Be careful to prevent any further access + * to the SDIO function and arrange for the tty layer to + * give up on that port ASAP. + * Beware: the lock ordering is critical. + */ + mutex_lock(&port->port.mutex); + mutex_lock(&port->func_lock); + func = port->func; + sdio_claim_host(func); + port->func = NULL; + mutex_unlock(&port->func_lock); + /* tty_hangup is async so is this safe as is ?? */ + tty_port_tty_hangup(&port->port, false); + mutex_unlock(&port->port.mutex); + sdio_release_irq(func); + sdio_disable_func(func); + sdio_release_host(func); + + sdio_uart_port_put(port); +} + +static int sdio_uart_claim_func(struct sdio_uart_port *port) +{ + mutex_lock(&port->func_lock); + if (unlikely(!port->func)) { + mutex_unlock(&port->func_lock); + return -ENODEV; + } + if (likely(port->in_sdio_uart_irq != current)) + sdio_claim_host(port->func); + mutex_unlock(&port->func_lock); + return 0; +} + +static inline void sdio_uart_release_func(struct sdio_uart_port *port) +{ + if (likely(port->in_sdio_uart_irq != current)) + sdio_release_host(port->func); +} + +static inline unsigned int sdio_in(struct sdio_uart_port *port, int offset) +{ + unsigned char c; + c = sdio_readb(port->func, port->regs_offset + offset, NULL); + return c; +} + +static inline void sdio_out(struct sdio_uart_port *port, int offset, int value) +{ + sdio_writeb(port->func, value, port->regs_offset + offset, NULL); +} + +static unsigned int sdio_uart_get_mctrl(struct sdio_uart_port *port) +{ + unsigned char status; + unsigned int ret; + + /* FIXME: What stops this losing the delta bits and breaking + sdio_uart_check_modem_status ? */ + status = sdio_in(port, UART_MSR); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void sdio_uart_write_mctrl(struct sdio_uart_port *port, + unsigned int mctrl) +{ + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + sdio_out(port, UART_MCR, mcr); +} + +static inline void sdio_uart_update_mctrl(struct sdio_uart_port *port, + unsigned int set, unsigned int clear) +{ + unsigned int old; + + old = port->mctrl; + port->mctrl = (old & ~clear) | set; + if (old != port->mctrl) + sdio_uart_write_mctrl(port, port->mctrl); +} + +#define sdio_uart_set_mctrl(port, x) sdio_uart_update_mctrl(port, x, 0) +#define sdio_uart_clear_mctrl(port, x) sdio_uart_update_mctrl(port, 0, x) + +static void sdio_uart_change_speed(struct sdio_uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned char cval, fcr = 0; + unsigned int baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; + + for (;;) { + baud = tty_termios_baud_rate(termios); + if (baud == 0) + baud = 9600; /* Special case: B0 rate. */ + if (baud <= port->uartclk) + break; + /* + * Oops, the quotient was zero. Try again with the old + * baud rate if possible, otherwise default to 9600. + */ + termios->c_cflag &= ~CBAUD; + if (old) { + termios->c_cflag |= old->c_cflag & CBAUD; + old = NULL; + } else + termios->c_cflag |= B9600; + } + quot = (2 * port->uartclk + baud) / (2 * baud); + + if (baud < 2400) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; + else + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10; + + port->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= UART_LSR_BI; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + port->ier &= ~UART_IER_MSI; + if ((termios->c_cflag & CRTSCTS) || !(termios->c_cflag & CLOCAL)) + port->ier |= UART_IER_MSI; + + port->lcr = cval; + + sdio_out(port, UART_IER, port->ier); + sdio_out(port, UART_LCR, cval | UART_LCR_DLAB); + sdio_out(port, UART_DLL, quot & 0xff); + sdio_out(port, UART_DLM, quot >> 8); + sdio_out(port, UART_LCR, cval); + sdio_out(port, UART_FCR, fcr); + + sdio_uart_write_mctrl(port, port->mctrl); +} + +static void sdio_uart_start_tx(struct sdio_uart_port *port) +{ + if (!(port->ier & UART_IER_THRI)) { + port->ier |= UART_IER_THRI; + sdio_out(port, UART_IER, port->ier); + } +} + +static void sdio_uart_stop_tx(struct sdio_uart_port *port) +{ + if (port->ier & UART_IER_THRI) { + port->ier &= ~UART_IER_THRI; + sdio_out(port, UART_IER, port->ier); + } +} + +static void sdio_uart_stop_rx(struct sdio_uart_port *port) +{ + port->ier &= ~UART_IER_RLSI; + port->read_status_mask &= ~UART_LSR_DR; + sdio_out(port, UART_IER, port->ier); +} + +static void sdio_uart_receive_chars(struct sdio_uart_port *port, + unsigned int *status) +{ + unsigned int ch, flag; + int max_count = 256; + + do { + ch = sdio_in(port, UART_RX); + flag = TTY_NORMAL; + port->icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + /* + * For statistics only + */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + port->icount.brk++; + } else if (*status & UART_LSR_PE) + port->icount.parity++; + else if (*status & UART_LSR_FE) + port->icount.frame++; + if (*status & UART_LSR_OE) + port->icount.overrun++; + + /* + * Mask off conditions which should be ignored. + */ + *status &= port->read_status_mask; + if (*status & UART_LSR_BI) + flag = TTY_BREAK; + else if (*status & UART_LSR_PE) + flag = TTY_PARITY; + else if (*status & UART_LSR_FE) + flag = TTY_FRAME; + } + + if ((*status & port->ignore_status_mask & ~UART_LSR_OE) == 0) + tty_insert_flip_char(&port->port, ch, flag); + + /* + * Overrun is special. Since it's reported immediately, + * it doesn't affect the current character. + */ + if (*status & ~port->ignore_status_mask & UART_LSR_OE) + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); + + *status = sdio_in(port, UART_LSR); + } while ((*status & UART_LSR_DR) && (max_count-- > 0)); + + tty_flip_buffer_push(&port->port); +} + +static void sdio_uart_transmit_chars(struct sdio_uart_port *port) +{ + struct kfifo *xmit = &port->xmit_fifo; + int count; + struct tty_struct *tty; + u8 iobuf[16]; + int len; + + if (port->x_char) { + sdio_out(port, UART_TX, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + tty = tty_port_tty_get(&port->port); + + if (tty == NULL || !kfifo_len(xmit) || + tty->stopped || tty->hw_stopped) { + sdio_uart_stop_tx(port); + tty_kref_put(tty); + return; + } + + len = kfifo_out_locked(xmit, iobuf, 16, &port->write_lock); + for (count = 0; count < len; count++) { + sdio_out(port, UART_TX, iobuf[count]); + port->icount.tx++; + } + + len = kfifo_len(xmit); + if (len < WAKEUP_CHARS) { + tty_wakeup(tty); + if (len == 0) + sdio_uart_stop_tx(port); + } + tty_kref_put(tty); +} + +static void sdio_uart_check_modem_status(struct sdio_uart_port *port) +{ + int status; + struct tty_struct *tty; + + status = sdio_in(port, UART_MSR); + + if ((status & UART_MSR_ANY_DELTA) == 0) + return; + + if (status & UART_MSR_TERI) + port->icount.rng++; + if (status & UART_MSR_DDSR) + port->icount.dsr++; + if (status & UART_MSR_DDCD) { + port->icount.dcd++; + /* DCD raise - wake for open */ + if (status & UART_MSR_DCD) + wake_up_interruptible(&port->port.open_wait); + else { + /* DCD drop - hang up if tty attached */ + tty_port_tty_hangup(&port->port, false); + } + } + if (status & UART_MSR_DCTS) { + port->icount.cts++; + tty = tty_port_tty_get(&port->port); + if (tty && C_CRTSCTS(tty)) { + int cts = (status & UART_MSR_CTS); + if (tty->hw_stopped) { + if (cts) { + tty->hw_stopped = 0; + sdio_uart_start_tx(port); + tty_wakeup(tty); + } + } else { + if (!cts) { + tty->hw_stopped = 1; + sdio_uart_stop_tx(port); + } + } + } + tty_kref_put(tty); + } +} + +/* + * This handles the interrupt from one port. + */ +static void sdio_uart_irq(struct sdio_func *func) +{ + struct sdio_uart_port *port = sdio_get_drvdata(func); + unsigned int iir, lsr; + + /* + * In a few places sdio_uart_irq() is called directly instead of + * waiting for the actual interrupt to be raised and the SDIO IRQ + * thread scheduled in order to reduce latency. However, some + * interaction with the tty core may end up calling us back + * (serial echo, flow control, etc.) through those same places + * causing undesirable effects. Let's stop the recursion here. + */ + if (unlikely(port->in_sdio_uart_irq == current)) + return; + + iir = sdio_in(port, UART_IIR); + if (iir & UART_IIR_NO_INT) + return; + + port->in_sdio_uart_irq = current; + lsr = sdio_in(port, UART_LSR); + if (lsr & UART_LSR_DR) + sdio_uart_receive_chars(port, &lsr); + sdio_uart_check_modem_status(port); + if (lsr & UART_LSR_THRE) + sdio_uart_transmit_chars(port); + port->in_sdio_uart_irq = NULL; +} + +static int uart_carrier_raised(struct tty_port *tport) +{ + struct sdio_uart_port *port = + container_of(tport, struct sdio_uart_port, port); + unsigned int ret = sdio_uart_claim_func(port); + if (ret) /* Missing hardware shouldn't block for carrier */ + return 1; + ret = sdio_uart_get_mctrl(port); + sdio_uart_release_func(port); + if (ret & TIOCM_CAR) + return 1; + return 0; +} + +/** + * uart_dtr_rts - port helper to set uart signals + * @tport: tty port to be updated + * @onoff: set to turn on DTR/RTS + * + * Called by the tty port helpers when the modem signals need to be + * adjusted during an open, close and hangup. + */ + +static void uart_dtr_rts(struct tty_port *tport, int onoff) +{ + struct sdio_uart_port *port = + container_of(tport, struct sdio_uart_port, port); + int ret = sdio_uart_claim_func(port); + if (ret) + return; + if (onoff == 0) + sdio_uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); + else + sdio_uart_set_mctrl(port, TIOCM_DTR | TIOCM_RTS); + sdio_uart_release_func(port); +} + +/** + * sdio_uart_activate - start up hardware + * @tport: tty port to activate + * @tty: tty bound to this port + * + * Activate a tty port. The port locking guarantees us this will be + * run exactly once per set of opens, and if successful will see the + * shutdown method run exactly once to match. Start up and shutdown are + * protected from each other by the internal locking and will not run + * at the same time even during a hangup event. + * + * If we successfully start up the port we take an extra kref as we + * will keep it around until shutdown when the kref is dropped. + */ + +static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty) +{ + struct sdio_uart_port *port = + container_of(tport, struct sdio_uart_port, port); + int ret; + + /* + * Set the TTY IO error marker - we will only clear this + * once we have successfully opened the port. + */ + set_bit(TTY_IO_ERROR, &tty->flags); + + kfifo_reset(&port->xmit_fifo); + + ret = sdio_uart_claim_func(port); + if (ret) + return ret; + ret = sdio_enable_func(port->func); + if (ret) + goto err1; + ret = sdio_claim_irq(port->func, sdio_uart_irq); + if (ret) + goto err2; + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in sdio_change_speed()) + */ + sdio_out(port, UART_FCR, UART_FCR_ENABLE_FIFO); + sdio_out(port, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + sdio_out(port, UART_FCR, 0); + + /* + * Clear the interrupt registers. + */ + (void) sdio_in(port, UART_LSR); + (void) sdio_in(port, UART_RX); + (void) sdio_in(port, UART_IIR); + (void) sdio_in(port, UART_MSR); + + /* + * Now, initialize the UART + */ + sdio_out(port, UART_LCR, UART_LCR_WLEN8); + + port->ier = UART_IER_RLSI|UART_IER_RDI|UART_IER_RTOIE|UART_IER_UUE; + port->mctrl = TIOCM_OUT2; + + sdio_uart_change_speed(port, &tty->termios, NULL); + + if (C_BAUD(tty)) + sdio_uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR); + + if (C_CRTSCTS(tty)) + if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS)) + tty->hw_stopped = 1; + + clear_bit(TTY_IO_ERROR, &tty->flags); + + /* Kick the IRQ handler once while we're still holding the host lock */ + sdio_uart_irq(port->func); + + sdio_uart_release_func(port); + return 0; + +err2: + sdio_disable_func(port->func); +err1: + sdio_uart_release_func(port); + return ret; +} + +/** + * sdio_uart_shutdown - stop hardware + * @tport: tty port to shut down + * + * Deactivate a tty port. The port locking guarantees us this will be + * run only if a successful matching activate already ran. The two are + * protected from each other by the internal locking and will not run + * at the same time even during a hangup event. + */ + +static void sdio_uart_shutdown(struct tty_port *tport) +{ + struct sdio_uart_port *port = + container_of(tport, struct sdio_uart_port, port); + int ret; + + ret = sdio_uart_claim_func(port); + if (ret) + return; + + sdio_uart_stop_rx(port); + + /* Disable interrupts from this port */ + sdio_release_irq(port->func); + port->ier = 0; + sdio_out(port, UART_IER, 0); + + sdio_uart_clear_mctrl(port, TIOCM_OUT2); + + /* Disable break condition and FIFOs. */ + port->lcr &= ~UART_LCR_SBC; + sdio_out(port, UART_LCR, port->lcr); + sdio_out(port, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + sdio_out(port, UART_FCR, 0); + + sdio_disable_func(port->func); + + sdio_uart_release_func(port); +} + +static void sdio_uart_port_destroy(struct tty_port *tport) +{ + struct sdio_uart_port *port = + container_of(tport, struct sdio_uart_port, port); + kfifo_free(&port->xmit_fifo); + kfree(port); +} + +/** + * sdio_uart_install - install method + * @driver: the driver in use (sdio_uart in our case) + * @tty: the tty being bound + * + * Look up and bind the tty and the driver together. Initialize + * any needed private data (in our case the termios) + */ + +static int sdio_uart_install(struct tty_driver *driver, struct tty_struct *tty) +{ + int idx = tty->index; + struct sdio_uart_port *port = sdio_uart_port_get(idx); + int ret = tty_standard_install(driver, tty); + + if (ret == 0) + /* This is the ref sdio_uart_port get provided */ + tty->driver_data = port; + else + sdio_uart_port_put(port); + return ret; +} + +/** + * sdio_uart_cleanup - called on the last tty kref drop + * @tty: the tty being destroyed + * + * Called asynchronously when the last reference to the tty is dropped. + * We cannot destroy the tty->driver_data port kref until this point + */ + +static void sdio_uart_cleanup(struct tty_struct *tty) +{ + struct sdio_uart_port *port = tty->driver_data; + tty->driver_data = NULL; /* Bug trap */ + sdio_uart_port_put(port); +} + +/* + * Open/close/hangup is now entirely boilerplate + */ + +static int sdio_uart_open(struct tty_struct *tty, struct file *filp) +{ + struct sdio_uart_port *port = tty->driver_data; + return tty_port_open(&port->port, tty, filp); +} + +static void sdio_uart_close(struct tty_struct *tty, struct file * filp) +{ + struct sdio_uart_port *port = tty->driver_data; + tty_port_close(&port->port, tty, filp); +} + +static void sdio_uart_hangup(struct tty_struct *tty) +{ + struct sdio_uart_port *port = tty->driver_data; + tty_port_hangup(&port->port); +} + +static int sdio_uart_write(struct tty_struct *tty, const unsigned char *buf, + int count) +{ + struct sdio_uart_port *port = tty->driver_data; + int ret; + + if (!port->func) + return -ENODEV; + + ret = kfifo_in_locked(&port->xmit_fifo, buf, count, &port->write_lock); + if (!(port->ier & UART_IER_THRI)) { + int err = sdio_uart_claim_func(port); + if (!err) { + sdio_uart_start_tx(port); + sdio_uart_irq(port->func); + sdio_uart_release_func(port); + } else + ret = err; + } + + return ret; +} + +static int sdio_uart_write_room(struct tty_struct *tty) +{ + struct sdio_uart_port *port = tty->driver_data; + return FIFO_SIZE - kfifo_len(&port->xmit_fifo); +} + +static int sdio_uart_chars_in_buffer(struct tty_struct *tty) +{ + struct sdio_uart_port *port = tty->driver_data; + return kfifo_len(&port->xmit_fifo); +} + +static void sdio_uart_send_xchar(struct tty_struct *tty, char ch) +{ + struct sdio_uart_port *port = tty->driver_data; + + port->x_char = ch; + if (ch && !(port->ier & UART_IER_THRI)) { + if (sdio_uart_claim_func(port) != 0) + return; + sdio_uart_start_tx(port); + sdio_uart_irq(port->func); + sdio_uart_release_func(port); + } +} + +static void sdio_uart_throttle(struct tty_struct *tty) +{ + struct sdio_uart_port *port = tty->driver_data; + + if (!I_IXOFF(tty) && !C_CRTSCTS(tty)) + return; + + if (sdio_uart_claim_func(port) != 0) + return; + + if (I_IXOFF(tty)) { + port->x_char = STOP_CHAR(tty); + sdio_uart_start_tx(port); + } + + if (C_CRTSCTS(tty)) + sdio_uart_clear_mctrl(port, TIOCM_RTS); + + sdio_uart_irq(port->func); + sdio_uart_release_func(port); +} + +static void sdio_uart_unthrottle(struct tty_struct *tty) +{ + struct sdio_uart_port *port = tty->driver_data; + + if (!I_IXOFF(tty) && !C_CRTSCTS(tty)) + return; + + if (sdio_uart_claim_func(port) != 0) + return; + + if (I_IXOFF(tty)) { + if (port->x_char) { + port->x_char = 0; + } else { + port->x_char = START_CHAR(tty); + sdio_uart_start_tx(port); + } + } + + if (C_CRTSCTS(tty)) + sdio_uart_set_mctrl(port, TIOCM_RTS); + + sdio_uart_irq(port->func); + sdio_uart_release_func(port); +} + +static void sdio_uart_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) +{ + struct sdio_uart_port *port = tty->driver_data; + unsigned int cflag = tty->termios.c_cflag; + + if (sdio_uart_claim_func(port) != 0) + return; + + sdio_uart_change_speed(port, &tty->termios, old_termios); + + /* Handle transition to B0 status */ + if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) + sdio_uart_clear_mctrl(port, TIOCM_RTS | TIOCM_DTR); + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) { + unsigned int mask = TIOCM_DTR; + if (!(cflag & CRTSCTS) || !tty_throttled(tty)) + mask |= TIOCM_RTS; + sdio_uart_set_mctrl(port, mask); + } + + /* Handle turning off CRTSCTS */ + if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) { + tty->hw_stopped = 0; + sdio_uart_start_tx(port); + } + + /* Handle turning on CRTSCTS */ + if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) { + if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS)) { + tty->hw_stopped = 1; + sdio_uart_stop_tx(port); + } + } + + sdio_uart_release_func(port); +} + +static int sdio_uart_break_ctl(struct tty_struct *tty, int break_state) +{ + struct sdio_uart_port *port = tty->driver_data; + int result; + + result = sdio_uart_claim_func(port); + if (result != 0) + return result; + + if (break_state == -1) + port->lcr |= UART_LCR_SBC; + else + port->lcr &= ~UART_LCR_SBC; + sdio_out(port, UART_LCR, port->lcr); + + sdio_uart_release_func(port); + return 0; +} + +static int sdio_uart_tiocmget(struct tty_struct *tty) +{ + struct sdio_uart_port *port = tty->driver_data; + int result; + + result = sdio_uart_claim_func(port); + if (!result) { + result = port->mctrl | sdio_uart_get_mctrl(port); + sdio_uart_release_func(port); + } + + return result; +} + +static int sdio_uart_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct sdio_uart_port *port = tty->driver_data; + int result; + + result = sdio_uart_claim_func(port); + if (!result) { + sdio_uart_update_mctrl(port, set, clear); + sdio_uart_release_func(port); + } + + return result; +} + +static int sdio_uart_proc_show(struct seq_file *m, void *v) +{ + int i; + + seq_printf(m, "serinfo:1.0 driver%s%s revision:%s\n", + "", "", ""); + for (i = 0; i < UART_NR; i++) { + struct sdio_uart_port *port = sdio_uart_port_get(i); + if (port) { + seq_printf(m, "%d: uart:SDIO", i); + if (capable(CAP_SYS_ADMIN)) { + seq_printf(m, " tx:%d rx:%d", + port->icount.tx, port->icount.rx); + if (port->icount.frame) + seq_printf(m, " fe:%d", + port->icount.frame); + if (port->icount.parity) + seq_printf(m, " pe:%d", + port->icount.parity); + if (port->icount.brk) + seq_printf(m, " brk:%d", + port->icount.brk); + if (port->icount.overrun) + seq_printf(m, " oe:%d", + port->icount.overrun); + if (port->icount.cts) + seq_printf(m, " cts:%d", + port->icount.cts); + if (port->icount.dsr) + seq_printf(m, " dsr:%d", + port->icount.dsr); + if (port->icount.rng) + seq_printf(m, " rng:%d", + port->icount.rng); + if (port->icount.dcd) + seq_printf(m, " dcd:%d", + port->icount.dcd); + } + sdio_uart_port_put(port); + seq_putc(m, '\n'); + } + } + return 0; +} + +static const struct tty_port_operations sdio_uart_port_ops = { + .dtr_rts = uart_dtr_rts, + .carrier_raised = uart_carrier_raised, + .shutdown = sdio_uart_shutdown, + .activate = sdio_uart_activate, + .destruct = sdio_uart_port_destroy, +}; + +static const struct tty_operations sdio_uart_ops = { + .open = sdio_uart_open, + .close = sdio_uart_close, + .write = sdio_uart_write, + .write_room = sdio_uart_write_room, + .chars_in_buffer = sdio_uart_chars_in_buffer, + .send_xchar = sdio_uart_send_xchar, + .throttle = sdio_uart_throttle, + .unthrottle = sdio_uart_unthrottle, + .set_termios = sdio_uart_set_termios, + .hangup = sdio_uart_hangup, + .break_ctl = sdio_uart_break_ctl, + .tiocmget = sdio_uart_tiocmget, + .tiocmset = sdio_uart_tiocmset, + .install = sdio_uart_install, + .cleanup = sdio_uart_cleanup, + .proc_show = sdio_uart_proc_show, +}; + +static struct tty_driver *sdio_uart_tty_driver; + +static int sdio_uart_probe(struct sdio_func *func, + const struct sdio_device_id *id) +{ + struct sdio_uart_port *port; + int ret; + + port = kzalloc(sizeof(struct sdio_uart_port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + if (func->class == SDIO_CLASS_UART) { + pr_warn("%s: need info on UART class basic setup\n", + sdio_func_id(func)); + kfree(port); + return -ENOSYS; + } else if (func->class == SDIO_CLASS_GPS) { + /* + * We need tuple 0x91. It contains SUBTPL_SIOREG + * and SUBTPL_RCVCAPS. + */ + struct sdio_func_tuple *tpl; + for (tpl = func->tuples; tpl; tpl = tpl->next) { + if (tpl->code != 0x91) + continue; + if (tpl->size < 10) + continue; + if (tpl->data[1] == 0) /* SUBTPL_SIOREG */ + break; + } + if (!tpl) { + pr_warn("%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n", + sdio_func_id(func)); + kfree(port); + return -EINVAL; + } + pr_debug("%s: Register ID = 0x%02x, Exp ID = 0x%02x\n", + sdio_func_id(func), tpl->data[2], tpl->data[3]); + port->regs_offset = (tpl->data[4] << 0) | + (tpl->data[5] << 8) | + (tpl->data[6] << 16); + pr_debug("%s: regs offset = 0x%x\n", + sdio_func_id(func), port->regs_offset); + port->uartclk = tpl->data[7] * 115200; + if (port->uartclk == 0) + port->uartclk = 115200; + pr_debug("%s: clk %d baudcode %u 4800-div %u\n", + sdio_func_id(func), port->uartclk, + tpl->data[7], tpl->data[8] | (tpl->data[9] << 8)); + } else { + kfree(port); + return -EINVAL; + } + + port->func = func; + sdio_set_drvdata(func, port); + tty_port_init(&port->port); + port->port.ops = &sdio_uart_port_ops; + + ret = sdio_uart_add_port(port); + if (ret) { + kfree(port); + } else { + struct device *dev; + dev = tty_port_register_device(&port->port, + sdio_uart_tty_driver, port->index, &func->dev); + if (IS_ERR(dev)) { + sdio_uart_port_remove(port); + ret = PTR_ERR(dev); + } + } + + return ret; +} + +static void sdio_uart_remove(struct sdio_func *func) +{ + struct sdio_uart_port *port = sdio_get_drvdata(func); + + tty_unregister_device(sdio_uart_tty_driver, port->index); + sdio_uart_port_remove(port); +} + +static const struct sdio_device_id sdio_uart_ids[] = { + { SDIO_DEVICE_CLASS(SDIO_CLASS_UART) }, + { SDIO_DEVICE_CLASS(SDIO_CLASS_GPS) }, + { /* end: all zeroes */ }, +}; + +MODULE_DEVICE_TABLE(sdio, sdio_uart_ids); + +static struct sdio_driver sdio_uart_driver = { + .probe = sdio_uart_probe, + .remove = sdio_uart_remove, + .name = "sdio_uart", + .id_table = sdio_uart_ids, +}; + +static int __init sdio_uart_init(void) +{ + int ret; + struct tty_driver *tty_drv; + + sdio_uart_tty_driver = tty_drv = alloc_tty_driver(UART_NR); + if (!tty_drv) + return -ENOMEM; + + tty_drv->driver_name = "sdio_uart"; + tty_drv->name = "ttySDIO"; + tty_drv->major = 0; /* dynamically allocated */ + tty_drv->minor_start = 0; + tty_drv->type = TTY_DRIVER_TYPE_SERIAL; + tty_drv->subtype = SERIAL_TYPE_NORMAL; + tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + tty_drv->init_termios = tty_std_termios; + tty_drv->init_termios.c_cflag = B4800 | CS8 | CREAD | HUPCL | CLOCAL; + tty_drv->init_termios.c_ispeed = 4800; + tty_drv->init_termios.c_ospeed = 4800; + tty_set_operations(tty_drv, &sdio_uart_ops); + + ret = tty_register_driver(tty_drv); + if (ret) + goto err1; + + ret = sdio_register_driver(&sdio_uart_driver); + if (ret) + goto err2; + + return 0; + +err2: + tty_unregister_driver(tty_drv); +err1: + put_tty_driver(tty_drv); + return ret; +} + +static void __exit sdio_uart_exit(void) +{ + sdio_unregister_driver(&sdio_uart_driver); + tty_unregister_driver(sdio_uart_tty_driver); + put_tty_driver(sdio_uart_tty_driver); +} + +module_init(sdio_uart_init); +module_exit(sdio_uart_exit); + +MODULE_AUTHOR("Nicolas Pitre"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c new file mode 100644 index 000000000..05e907451 --- /dev/null +++ b/drivers/mmc/core/slot-gpio.c @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Generic GPIO card-detect helper + * + * Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de> + */ + +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/mmc/host.h> +#include <linux/mmc/slot-gpio.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include "slot-gpio.h" + +struct mmc_gpio { + struct gpio_desc *ro_gpio; + struct gpio_desc *cd_gpio; + irqreturn_t (*cd_gpio_isr)(int irq, void *dev_id); + char *ro_label; + char *cd_label; + u32 cd_debounce_delay_ms; +}; + +static irqreturn_t mmc_gpio_cd_irqt(int irq, void *dev_id) +{ + /* Schedule a card detection after a debounce timeout */ + struct mmc_host *host = dev_id; + struct mmc_gpio *ctx = host->slot.handler_priv; + + host->trigger_card_event = true; + mmc_detect_change(host, msecs_to_jiffies(ctx->cd_debounce_delay_ms)); + + return IRQ_HANDLED; +} + +int mmc_gpio_alloc(struct mmc_host *host) +{ + struct mmc_gpio *ctx = devm_kzalloc(host->parent, + sizeof(*ctx), GFP_KERNEL); + + if (ctx) { + ctx->cd_debounce_delay_ms = 200; + ctx->cd_label = devm_kasprintf(host->parent, GFP_KERNEL, + "%s cd", dev_name(host->parent)); + if (!ctx->cd_label) + return -ENOMEM; + ctx->ro_label = devm_kasprintf(host->parent, GFP_KERNEL, + "%s ro", dev_name(host->parent)); + if (!ctx->ro_label) + return -ENOMEM; + host->slot.handler_priv = ctx; + host->slot.cd_irq = -EINVAL; + } + + return ctx ? 0 : -ENOMEM; +} + +int mmc_gpio_get_ro(struct mmc_host *host) +{ + struct mmc_gpio *ctx = host->slot.handler_priv; + + if (!ctx || !ctx->ro_gpio) + return -ENOSYS; + + return gpiod_get_value_cansleep(ctx->ro_gpio); +} +EXPORT_SYMBOL(mmc_gpio_get_ro); + +int mmc_gpio_get_cd(struct mmc_host *host) +{ + struct mmc_gpio *ctx = host->slot.handler_priv; + int cansleep; + + if (!ctx || !ctx->cd_gpio) + return -ENOSYS; + + cansleep = gpiod_cansleep(ctx->cd_gpio); + return cansleep ? + gpiod_get_value_cansleep(ctx->cd_gpio) : + gpiod_get_value(ctx->cd_gpio); +} +EXPORT_SYMBOL(mmc_gpio_get_cd); + +void mmc_gpiod_request_cd_irq(struct mmc_host *host) +{ + struct mmc_gpio *ctx = host->slot.handler_priv; + int irq = -EINVAL; + int ret; + + if (host->slot.cd_irq >= 0 || !ctx || !ctx->cd_gpio) + return; + + /* + * Do not use IRQ if the platform prefers to poll, e.g., because that + * IRQ number is already used by another unit and cannot be shared. + */ + if (!(host->caps & MMC_CAP_NEEDS_POLL)) + irq = gpiod_to_irq(ctx->cd_gpio); + + if (irq >= 0) { + if (!ctx->cd_gpio_isr) + ctx->cd_gpio_isr = mmc_gpio_cd_irqt; + ret = devm_request_threaded_irq(host->parent, irq, + NULL, ctx->cd_gpio_isr, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + ctx->cd_label, host); + if (ret < 0) + irq = ret; + } + + host->slot.cd_irq = irq; + + if (irq < 0) + host->caps |= MMC_CAP_NEEDS_POLL; +} +EXPORT_SYMBOL(mmc_gpiod_request_cd_irq); + +int mmc_gpio_set_cd_wake(struct mmc_host *host, bool on) +{ + int ret = 0; + + if (!(host->caps & MMC_CAP_CD_WAKE) || + host->slot.cd_irq < 0 || + on == host->slot.cd_wake_enabled) + return 0; + + if (on) { + ret = enable_irq_wake(host->slot.cd_irq); + host->slot.cd_wake_enabled = !ret; + } else { + disable_irq_wake(host->slot.cd_irq); + host->slot.cd_wake_enabled = false; + } + + return ret; +} +EXPORT_SYMBOL(mmc_gpio_set_cd_wake); + +/* Register an alternate interrupt service routine for + * the card-detect GPIO. + */ +void mmc_gpio_set_cd_isr(struct mmc_host *host, + irqreturn_t (*isr)(int irq, void *dev_id)) +{ + struct mmc_gpio *ctx = host->slot.handler_priv; + + WARN_ON(ctx->cd_gpio_isr); + ctx->cd_gpio_isr = isr; +} +EXPORT_SYMBOL(mmc_gpio_set_cd_isr); + +/** + * mmc_gpiod_request_cd - request a gpio descriptor for card-detection + * @host: mmc host + * @con_id: function within the GPIO consumer + * @idx: index of the GPIO to obtain in the consumer + * @override_active_level: ignore %GPIO_ACTIVE_LOW flag + * @debounce: debounce time in microseconds + * + * Note that this must be called prior to mmc_add_host() + * otherwise the caller must also call mmc_gpiod_request_cd_irq(). + * + * Returns zero on success, else an error. + */ +int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id, + unsigned int idx, bool override_active_level, + unsigned int debounce) +{ + struct mmc_gpio *ctx = host->slot.handler_priv; + struct gpio_desc *desc; + int ret; + + desc = devm_gpiod_get_index(host->parent, con_id, idx, GPIOD_IN); + if (IS_ERR(desc)) + return PTR_ERR(desc); + + if (debounce) { + ret = gpiod_set_debounce(desc, debounce); + if (ret < 0) + ctx->cd_debounce_delay_ms = debounce / 1000; + } + + /* override forces default (active-low) polarity ... */ + if (override_active_level && !gpiod_is_active_low(desc)) + gpiod_toggle_active_low(desc); + + /* ... or active-high */ + if (host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH) + gpiod_toggle_active_low(desc); + + ctx->cd_gpio = desc; + + return 0; +} +EXPORT_SYMBOL(mmc_gpiod_request_cd); + +bool mmc_can_gpio_cd(struct mmc_host *host) +{ + struct mmc_gpio *ctx = host->slot.handler_priv; + + return ctx->cd_gpio ? true : false; +} +EXPORT_SYMBOL(mmc_can_gpio_cd); + +/** + * mmc_gpiod_request_ro - request a gpio descriptor for write protection + * @host: mmc host + * @con_id: function within the GPIO consumer + * @idx: index of the GPIO to obtain in the consumer + * @debounce: debounce time in microseconds + * + * Returns zero on success, else an error. + */ +int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id, + unsigned int idx, unsigned int debounce) +{ + struct mmc_gpio *ctx = host->slot.handler_priv; + struct gpio_desc *desc; + int ret; + + desc = devm_gpiod_get_index(host->parent, con_id, idx, GPIOD_IN); + if (IS_ERR(desc)) + return PTR_ERR(desc); + + if (debounce) { + ret = gpiod_set_debounce(desc, debounce); + if (ret < 0) + return ret; + } + + if (host->caps2 & MMC_CAP2_RO_ACTIVE_HIGH) + gpiod_toggle_active_low(desc); + + ctx->ro_gpio = desc; + + return 0; +} +EXPORT_SYMBOL(mmc_gpiod_request_ro); + +bool mmc_can_gpio_ro(struct mmc_host *host) +{ + struct mmc_gpio *ctx = host->slot.handler_priv; + + return ctx->ro_gpio ? true : false; +} +EXPORT_SYMBOL(mmc_can_gpio_ro); diff --git a/drivers/mmc/core/slot-gpio.h b/drivers/mmc/core/slot-gpio.h new file mode 100644 index 000000000..546a5843b --- /dev/null +++ b/drivers/mmc/core/slot-gpio.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2014 Linaro Ltd + * + * Author: Ulf Hansson <ulf.hansson@linaro.org> + */ +#ifndef _MMC_CORE_SLOTGPIO_H +#define _MMC_CORE_SLOTGPIO_H + +struct mmc_host; + +int mmc_gpio_alloc(struct mmc_host *host); + +#endif |