diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/mmc/host/mmci.h | 475 |
1 files changed, 475 insertions, 0 deletions
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h new file mode 100644 index 000000000..e1a9b96a3 --- /dev/null +++ b/drivers/mmc/host/mmci.h @@ -0,0 +1,475 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * linux/drivers/mmc/host/mmci.h - ARM PrimeCell MMCI PL180/1 driver + * + * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. + */ +#define MMCIPOWER 0x000 +#define MCI_PWR_OFF 0x00 +#define MCI_PWR_UP 0x02 +#define MCI_PWR_ON 0x03 +#define MCI_OD (1 << 6) +#define MCI_ROD (1 << 7) +/* + * The ST Micro version does not have ROD and reuse the voltage registers for + * direction settings. + */ +#define MCI_ST_DATA2DIREN (1 << 2) +#define MCI_ST_CMDDIREN (1 << 3) +#define MCI_ST_DATA0DIREN (1 << 4) +#define MCI_ST_DATA31DIREN (1 << 5) +#define MCI_ST_FBCLKEN (1 << 7) +#define MCI_ST_DATA74DIREN (1 << 8) +/* + * The STM32 sdmmc does not have PWR_UP/OD/ROD + * and uses the power register for + */ +#define MCI_STM32_PWR_CYC 0x02 +#define MCI_STM32_VSWITCH BIT(2) +#define MCI_STM32_VSWITCHEN BIT(3) +#define MCI_STM32_DIRPOL BIT(4) + +#define MMCICLOCK 0x004 +#define MCI_CLK_ENABLE (1 << 8) +#define MCI_CLK_PWRSAVE (1 << 9) +#define MCI_CLK_BYPASS (1 << 10) +#define MCI_4BIT_BUS (1 << 11) +/* + * 8bit wide buses, hardware flow contronl, negative edges and clock inversion + * supported in ST Micro U300 and Ux500 versions + */ +#define MCI_ST_8BIT_BUS (1 << 12) +#define MCI_ST_U300_HWFCEN (1 << 13) +#define MCI_ST_UX500_NEG_EDGE (1 << 13) +#define MCI_ST_UX500_HWFCEN (1 << 14) +#define MCI_ST_UX500_CLK_INV (1 << 15) +/* Modified PL180 on Versatile Express platform */ +#define MCI_ARM_HWFCEN (1 << 12) + +/* Modified on Qualcomm Integrations */ +#define MCI_QCOM_CLK_WIDEBUS_8 (BIT(10) | BIT(11)) +#define MCI_QCOM_CLK_FLOWENA BIT(12) +#define MCI_QCOM_CLK_INVERTOUT BIT(13) + +/* select in latch data and command in */ +#define MCI_QCOM_CLK_SELECT_IN_FBCLK BIT(15) +#define MCI_QCOM_CLK_SELECT_IN_DDR_MODE (BIT(14) | BIT(15)) + +/* Modified on STM32 sdmmc */ +#define MCI_STM32_CLK_CLKDIV_MSK GENMASK(9, 0) +#define MCI_STM32_CLK_WIDEBUS_4 BIT(14) +#define MCI_STM32_CLK_WIDEBUS_8 BIT(15) +#define MCI_STM32_CLK_NEGEDGE BIT(16) +#define MCI_STM32_CLK_HWFCEN BIT(17) +#define MCI_STM32_CLK_DDR BIT(18) +#define MCI_STM32_CLK_BUSSPEED BIT(19) +#define MCI_STM32_CLK_SEL_MSK GENMASK(21, 20) +#define MCI_STM32_CLK_SELCK (0 << 20) +#define MCI_STM32_CLK_SELCKIN (1 << 20) +#define MCI_STM32_CLK_SELFBCK (2 << 20) + +#define MMCIARGUMENT 0x008 + +/* The command register controls the Command Path State Machine (CPSM) */ +#define MMCICOMMAND 0x00c +#define MCI_CPSM_RESPONSE BIT(6) +#define MCI_CPSM_LONGRSP BIT(7) +#define MCI_CPSM_INTERRUPT BIT(8) +#define MCI_CPSM_PENDING BIT(9) +#define MCI_CPSM_ENABLE BIT(10) +/* Command register flag extenstions in the ST Micro versions */ +#define MCI_CPSM_ST_SDIO_SUSP BIT(11) +#define MCI_CPSM_ST_ENCMD_COMPL BIT(12) +#define MCI_CPSM_ST_NIEN BIT(13) +#define MCI_CPSM_ST_CE_ATACMD BIT(14) +/* Command register flag extensions in the Qualcomm versions */ +#define MCI_CPSM_QCOM_PROGENA BIT(11) +#define MCI_CPSM_QCOM_DATCMD BIT(12) +#define MCI_CPSM_QCOM_MCIABORT BIT(13) +#define MCI_CPSM_QCOM_CCSENABLE BIT(14) +#define MCI_CPSM_QCOM_CCSDISABLE BIT(15) +#define MCI_CPSM_QCOM_AUTO_CMD19 BIT(16) +#define MCI_CPSM_QCOM_AUTO_CMD21 BIT(21) +/* Command register in STM32 sdmmc versions */ +#define MCI_CPSM_STM32_CMDTRANS BIT(6) +#define MCI_CPSM_STM32_CMDSTOP BIT(7) +#define MCI_CPSM_STM32_WAITRESP_MASK GENMASK(9, 8) +#define MCI_CPSM_STM32_NORSP (0 << 8) +#define MCI_CPSM_STM32_SRSP_CRC (1 << 8) +#define MCI_CPSM_STM32_SRSP (2 << 8) +#define MCI_CPSM_STM32_LRSP_CRC (3 << 8) +#define MCI_CPSM_STM32_ENABLE BIT(12) + +#define MMCIRESPCMD 0x010 +#define MMCIRESPONSE0 0x014 +#define MMCIRESPONSE1 0x018 +#define MMCIRESPONSE2 0x01c +#define MMCIRESPONSE3 0x020 +#define MMCIDATATIMER 0x024 +#define MMCIDATALENGTH 0x028 + +/* The data control register controls the Data Path State Machine (DPSM) */ +#define MMCIDATACTRL 0x02c +#define MCI_DPSM_ENABLE BIT(0) +#define MCI_DPSM_DIRECTION BIT(1) +#define MCI_DPSM_MODE BIT(2) +#define MCI_DPSM_DMAENABLE BIT(3) +#define MCI_DPSM_BLOCKSIZE BIT(4) +/* Control register extensions in the ST Micro U300 and Ux500 versions */ +#define MCI_DPSM_ST_RWSTART BIT(8) +#define MCI_DPSM_ST_RWSTOP BIT(9) +#define MCI_DPSM_ST_RWMOD BIT(10) +#define MCI_DPSM_ST_SDIOEN BIT(11) +/* Control register extensions in the ST Micro Ux500 versions */ +#define MCI_DPSM_ST_DMAREQCTL BIT(12) +#define MCI_DPSM_ST_DBOOTMODEEN BIT(13) +#define MCI_DPSM_ST_BUSYMODE BIT(14) +#define MCI_DPSM_ST_DDRMODE BIT(15) +/* Control register extensions in the Qualcomm versions */ +#define MCI_DPSM_QCOM_DATA_PEND BIT(17) +#define MCI_DPSM_QCOM_RX_DATA_PEND BIT(20) +/* Control register extensions in STM32 versions */ +#define MCI_DPSM_STM32_MODE_BLOCK (0 << 2) +#define MCI_DPSM_STM32_MODE_SDIO (1 << 2) +#define MCI_DPSM_STM32_MODE_STREAM (2 << 2) +#define MCI_DPSM_STM32_MODE_BLOCK_STOP (3 << 2) + +#define MMCIDATACNT 0x030 +#define MMCISTATUS 0x034 +#define MCI_CMDCRCFAIL (1 << 0) +#define MCI_DATACRCFAIL (1 << 1) +#define MCI_CMDTIMEOUT (1 << 2) +#define MCI_DATATIMEOUT (1 << 3) +#define MCI_TXUNDERRUN (1 << 4) +#define MCI_RXOVERRUN (1 << 5) +#define MCI_CMDRESPEND (1 << 6) +#define MCI_CMDSENT (1 << 7) +#define MCI_DATAEND (1 << 8) +#define MCI_STARTBITERR (1 << 9) +#define MCI_DATABLOCKEND (1 << 10) +#define MCI_CMDACTIVE (1 << 11) +#define MCI_TXACTIVE (1 << 12) +#define MCI_RXACTIVE (1 << 13) +#define MCI_TXFIFOHALFEMPTY (1 << 14) +#define MCI_RXFIFOHALFFULL (1 << 15) +#define MCI_TXFIFOFULL (1 << 16) +#define MCI_RXFIFOFULL (1 << 17) +#define MCI_TXFIFOEMPTY (1 << 18) +#define MCI_RXFIFOEMPTY (1 << 19) +#define MCI_TXDATAAVLBL (1 << 20) +#define MCI_RXDATAAVLBL (1 << 21) +/* Extended status bits for the ST Micro variants */ +#define MCI_ST_SDIOIT (1 << 22) +#define MCI_ST_CEATAEND (1 << 23) +#define MCI_ST_CARDBUSY (1 << 24) +/* Extended status bits for the STM32 variants */ +#define MCI_STM32_BUSYD0 BIT(20) +#define MCI_STM32_BUSYD0END BIT(21) +#define MCI_STM32_VSWEND BIT(25) + +#define MMCICLEAR 0x038 +#define MCI_CMDCRCFAILCLR (1 << 0) +#define MCI_DATACRCFAILCLR (1 << 1) +#define MCI_CMDTIMEOUTCLR (1 << 2) +#define MCI_DATATIMEOUTCLR (1 << 3) +#define MCI_TXUNDERRUNCLR (1 << 4) +#define MCI_RXOVERRUNCLR (1 << 5) +#define MCI_CMDRESPENDCLR (1 << 6) +#define MCI_CMDSENTCLR (1 << 7) +#define MCI_DATAENDCLR (1 << 8) +#define MCI_STARTBITERRCLR (1 << 9) +#define MCI_DATABLOCKENDCLR (1 << 10) +/* Extended status bits for the ST Micro variants */ +#define MCI_ST_SDIOITC (1 << 22) +#define MCI_ST_CEATAENDC (1 << 23) +#define MCI_ST_BUSYENDC (1 << 24) +/* Extended clear bits for the STM32 variants */ +#define MCI_STM32_VSWENDC BIT(25) +#define MCI_STM32_CKSTOPC BIT(26) + +#define MMCIMASK0 0x03c +#define MCI_CMDCRCFAILMASK (1 << 0) +#define MCI_DATACRCFAILMASK (1 << 1) +#define MCI_CMDTIMEOUTMASK (1 << 2) +#define MCI_DATATIMEOUTMASK (1 << 3) +#define MCI_TXUNDERRUNMASK (1 << 4) +#define MCI_RXOVERRUNMASK (1 << 5) +#define MCI_CMDRESPENDMASK (1 << 6) +#define MCI_CMDSENTMASK (1 << 7) +#define MCI_DATAENDMASK (1 << 8) +#define MCI_STARTBITERRMASK (1 << 9) +#define MCI_DATABLOCKENDMASK (1 << 10) +#define MCI_CMDACTIVEMASK (1 << 11) +#define MCI_TXACTIVEMASK (1 << 12) +#define MCI_RXACTIVEMASK (1 << 13) +#define MCI_TXFIFOHALFEMPTYMASK (1 << 14) +#define MCI_RXFIFOHALFFULLMASK (1 << 15) +#define MCI_TXFIFOFULLMASK (1 << 16) +#define MCI_RXFIFOFULLMASK (1 << 17) +#define MCI_TXFIFOEMPTYMASK (1 << 18) +#define MCI_RXFIFOEMPTYMASK (1 << 19) +#define MCI_TXDATAAVLBLMASK (1 << 20) +#define MCI_RXDATAAVLBLMASK (1 << 21) +/* Extended status bits for the ST Micro variants */ +#define MCI_ST_SDIOITMASK (1 << 22) +#define MCI_ST_CEATAENDMASK (1 << 23) +#define MCI_ST_BUSYENDMASK (1 << 24) +/* Extended status bits for the STM32 variants */ +#define MCI_STM32_BUSYD0ENDMASK BIT(21) + +#define MMCIMASK1 0x040 +#define MMCIFIFOCNT 0x048 +#define MMCIFIFO 0x080 /* to 0x0bc */ + +/* STM32 sdmmc registers for IDMA (Internal DMA) */ +#define MMCI_STM32_IDMACTRLR 0x050 +#define MMCI_STM32_IDMAEN BIT(0) +#define MMCI_STM32_IDMALLIEN BIT(1) + +#define MMCI_STM32_IDMABSIZER 0x054 +#define MMCI_STM32_IDMABNDT_SHIFT 5 +#define MMCI_STM32_IDMABNDT_MASK GENMASK(12, 5) + +#define MMCI_STM32_IDMABASE0R 0x058 + +#define MMCI_STM32_IDMALAR 0x64 +#define MMCI_STM32_IDMALA_MASK GENMASK(13, 0) +#define MMCI_STM32_ABR BIT(29) +#define MMCI_STM32_ULS BIT(30) +#define MMCI_STM32_ULA BIT(31) + +#define MMCI_STM32_IDMABAR 0x68 + +#define MCI_IRQENABLE \ + (MCI_CMDCRCFAILMASK | MCI_DATACRCFAILMASK | MCI_CMDTIMEOUTMASK | \ + MCI_DATATIMEOUTMASK | MCI_TXUNDERRUNMASK | MCI_RXOVERRUNMASK | \ + MCI_CMDRESPENDMASK | MCI_CMDSENTMASK) + +/* These interrupts are directed to IRQ1 when two IRQ lines are available */ +#define MCI_IRQ_PIO_MASK \ + (MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \ + MCI_TXFIFOHALFEMPTYMASK) + +#define MCI_IRQ_PIO_STM32_MASK \ + (MCI_RXFIFOHALFFULLMASK | MCI_TXFIFOHALFEMPTYMASK) + +#define NR_SG 128 + +#define MMCI_PINCTRL_STATE_OPENDRAIN "opendrain" + +struct clk; +struct dma_chan; +struct mmci_host; + +/** + * struct variant_data - MMCI variant-specific quirks + * @clkreg: default value for MCICLOCK register + * @clkreg_enable: enable value for MMCICLOCK register + * @clkreg_8bit_bus_enable: enable value for 8 bit bus + * @clkreg_neg_edge_enable: enable value for inverted data/cmd output + * @cmdreg_cpsm_enable: enable value for CPSM + * @cmdreg_lrsp_crc: enable value for long response with crc + * @cmdreg_srsp_crc: enable value for short response with crc + * @cmdreg_srsp: enable value for short response without crc + * @cmdreg_stop: enable value for stop and abort transmission + * @datalength_bits: number of bits in the MMCIDATALENGTH register + * @fifosize: number of bytes that can be written when MMCI_TXFIFOEMPTY + * is asserted (likewise for RX) + * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY + * is asserted (likewise for RX) + * @data_cmd_enable: enable value for data commands. + * @st_sdio: enable ST specific SDIO logic + * @st_clkdiv: true if using a ST-specific clock divider algorithm + * @stm32_clkdiv: true if using a STM32-specific clock divider algorithm + * @datactrl_mask_ddrmode: ddr mode mask in datactrl register. + * @datactrl_mask_sdio: SDIO enable mask in datactrl register + * @datactrl_blocksz: block size in power of two + * @datactrl_any_blocksz: true if block any block sizes are accepted by + * hardware, such as with some SDIO traffic that send + * odd packets. + * @dma_power_of_2: DMA only works with blocks that are a power of 2. + * @datactrl_first: true if data must be setup before send command + * @datacnt_useless: true if you could not use datacnt register to read + * remaining data + * @pwrreg_powerup: power up value for MMCIPOWER register + * @f_max: maximum clk frequency supported by the controller. + * @signal_direction: input/out direction of bus signals can be indicated + * @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock + * @busy_detect: true if the variant supports busy detection on DAT0. + * @busy_timeout: true if the variant starts data timer when the DPSM + * enter in Wait_R or Busy state. + * @busy_dpsm_flag: bitmask enabling busy detection in the DPSM + * @busy_detect_flag: bitmask identifying the bit in the MMCISTATUS register + * indicating that the card is busy + * @busy_detect_mask: bitmask identifying the bit in the MMCIMASK0 to mask for + * getting busy end detection interrupts + * @pwrreg_nopower: bits in MMCIPOWER don't controls ext. power supply + * @explicit_mclk_control: enable explicit mclk control in driver. + * @qcom_fifo: enables qcom specific fifo pio read logic. + * @qcom_dml: enables qcom specific dma glue for dma transfers. + * @reversed_irq_handling: handle data irq before cmd irq. + * @mmcimask1: true if variant have a MMCIMASK1 register. + * @irq_pio_mask: bitmask used to manage interrupt pio transfert in mmcimask + * register + * @start_err: bitmask identifying the STARTBITERR bit inside MMCISTATUS + * register. + * @opendrain: bitmask identifying the OPENDRAIN bit inside MMCIPOWER register + * @dma_lli: true if variant has dma link list feature. + * @stm32_idmabsize_mask: stm32 sdmmc idma buffer size. + */ +struct variant_data { + unsigned int clkreg; + unsigned int clkreg_enable; + unsigned int clkreg_8bit_bus_enable; + unsigned int clkreg_neg_edge_enable; + unsigned int cmdreg_cpsm_enable; + unsigned int cmdreg_lrsp_crc; + unsigned int cmdreg_srsp_crc; + unsigned int cmdreg_srsp; + unsigned int cmdreg_stop; + unsigned int datalength_bits; + unsigned int fifosize; + unsigned int fifohalfsize; + unsigned int data_cmd_enable; + unsigned int datactrl_mask_ddrmode; + unsigned int datactrl_mask_sdio; + unsigned int datactrl_blocksz; + u8 datactrl_any_blocksz:1; + u8 dma_power_of_2:1; + u8 datactrl_first:1; + u8 datacnt_useless:1; + u8 st_sdio:1; + u8 st_clkdiv:1; + u8 stm32_clkdiv:1; + u32 pwrreg_powerup; + u32 f_max; + u8 signal_direction:1; + u8 pwrreg_clkgate:1; + u8 busy_detect:1; + u8 busy_timeout:1; + u32 busy_dpsm_flag; + u32 busy_detect_flag; + u32 busy_detect_mask; + u8 pwrreg_nopower:1; + u8 explicit_mclk_control:1; + u8 qcom_fifo:1; + u8 qcom_dml:1; + u8 reversed_irq_handling:1; + u8 mmcimask1:1; + unsigned int irq_pio_mask; + u32 start_err; + u32 opendrain; + u8 dma_lli:1; + u32 stm32_idmabsize_mask; + void (*init)(struct mmci_host *host); +}; + +/* mmci variant callbacks */ +struct mmci_host_ops { + int (*validate_data)(struct mmci_host *host, struct mmc_data *data); + int (*prep_data)(struct mmci_host *host, struct mmc_data *data, + bool next); + void (*unprep_data)(struct mmci_host *host, struct mmc_data *data, + int err); + u32 (*get_datactrl_cfg)(struct mmci_host *host); + void (*get_next_data)(struct mmci_host *host, struct mmc_data *data); + int (*dma_setup)(struct mmci_host *host); + void (*dma_release)(struct mmci_host *host); + int (*dma_start)(struct mmci_host *host, unsigned int *datactrl); + void (*dma_finalize)(struct mmci_host *host, struct mmc_data *data); + void (*dma_error)(struct mmci_host *host); + void (*set_clkreg)(struct mmci_host *host, unsigned int desired); + void (*set_pwrreg)(struct mmci_host *host, unsigned int pwr); + bool (*busy_complete)(struct mmci_host *host, u32 status, u32 err_msk); + void (*pre_sig_volt_switch)(struct mmci_host *host); + int (*post_sig_volt_switch)(struct mmci_host *host, struct mmc_ios *ios); +}; + +struct mmci_host { + phys_addr_t phybase; + void __iomem *base; + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_command stop_abort; + struct mmc_data *data; + struct mmc_host *mmc; + struct clk *clk; + u8 singleirq:1; + + struct reset_control *rst; + + spinlock_t lock; + + unsigned int mclk; + /* cached value of requested clk in set_ios */ + unsigned int clock_cache; + unsigned int cclk; + u32 pwr_reg; + u32 pwr_reg_add; + u32 clk_reg; + u32 clk_reg_add; + u32 datactrl_reg; + u32 busy_status; + u32 mask1_reg; + u8 vqmmc_enabled:1; + struct mmci_platform_data *plat; + struct mmc_host_ops *mmc_ops; + struct mmci_host_ops *ops; + struct variant_data *variant; + void *variant_priv; + struct pinctrl *pinctrl; + struct pinctrl_state *pins_opendrain; + + u8 hw_designer; + u8 hw_revision:4; + + struct timer_list timer; + unsigned int oldstat; + u32 irq_action; + + /* pio stuff */ + struct sg_mapping_iter sg_miter; + unsigned int size; + int (*get_rx_fifocnt)(struct mmci_host *h, u32 status, int remain); + + u8 use_dma:1; + u8 dma_in_progress:1; + void *dma_priv; + + s32 next_cookie; +}; + +#define dma_inprogress(host) ((host)->dma_in_progress) + +void mmci_write_clkreg(struct mmci_host *host, u32 clk); +void mmci_write_pwrreg(struct mmci_host *host, u32 pwr); + +static inline u32 mmci_dctrl_blksz(struct mmci_host *host) +{ + return (ffs(host->data->blksz) - 1) << 4; +} + +#ifdef CONFIG_DMA_ENGINE +int mmci_dmae_prep_data(struct mmci_host *host, struct mmc_data *data, + bool next); +void mmci_dmae_unprep_data(struct mmci_host *host, struct mmc_data *data, + int err); +void mmci_dmae_get_next_data(struct mmci_host *host, struct mmc_data *data); +int mmci_dmae_setup(struct mmci_host *host); +void mmci_dmae_release(struct mmci_host *host); +int mmci_dmae_start(struct mmci_host *host, unsigned int *datactrl); +void mmci_dmae_finalize(struct mmci_host *host, struct mmc_data *data); +void mmci_dmae_error(struct mmci_host *host); +#endif + +#ifdef CONFIG_MMC_QCOM_DML +void qcom_variant_init(struct mmci_host *host); +#else +static inline void qcom_variant_init(struct mmci_host *host) {} +#endif + +#ifdef CONFIG_MMC_STM32_SDMMC +void sdmmc_variant_init(struct mmci_host *host); +#else +static inline void sdmmc_variant_init(struct mmci_host *host) {} +#endif |