diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-xenon-phy.c')
| -rw-r--r-- | drivers/mmc/host/sdhci-xenon-phy.c | 844 |
1 files changed, 844 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c new file mode 100644 index 000000000..03ce57ef4 --- /dev/null +++ b/drivers/mmc/host/sdhci-xenon-phy.c @@ -0,0 +1,844 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * PHY support for Xenon SDHC + * + * Copyright (C) 2016 Marvell, All Rights Reserved. + * + * Author: Hu Ziji <huziji@marvell.com> + * Date: 2016-8-24 + */ + +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/ktime.h> +#include <linux/of_address.h> + +#include "sdhci-pltfm.h" +#include "sdhci-xenon.h" + +/* Register base for eMMC PHY 5.0 Version */ +#define XENON_EMMC_5_0_PHY_REG_BASE 0x0160 +/* Register base for eMMC PHY 5.1 Version */ +#define XENON_EMMC_PHY_REG_BASE 0x0170 + +#define XENON_EMMC_PHY_TIMING_ADJUST XENON_EMMC_PHY_REG_BASE +#define XENON_EMMC_5_0_PHY_TIMING_ADJUST XENON_EMMC_5_0_PHY_REG_BASE +#define XENON_TIMING_ADJUST_SLOW_MODE BIT(29) +#define XENON_TIMING_ADJUST_SDIO_MODE BIT(28) +#define XENON_SAMPL_INV_QSP_PHASE_SELECT BIT(18) +#define XENON_SAMPL_INV_QSP_PHASE_SELECT_SHIFT 18 +#define XENON_PHY_INITIALIZAION BIT(31) +#define XENON_WAIT_CYCLE_BEFORE_USING_MASK 0xF +#define XENON_WAIT_CYCLE_BEFORE_USING_SHIFT 12 +#define XENON_FC_SYNC_EN_DURATION_MASK 0xF +#define XENON_FC_SYNC_EN_DURATION_SHIFT 8 +#define XENON_FC_SYNC_RST_EN_DURATION_MASK 0xF +#define XENON_FC_SYNC_RST_EN_DURATION_SHIFT 4 +#define XENON_FC_SYNC_RST_DURATION_MASK 0xF +#define XENON_FC_SYNC_RST_DURATION_SHIFT 0 + +#define XENON_EMMC_PHY_FUNC_CONTROL (XENON_EMMC_PHY_REG_BASE + 0x4) +#define XENON_EMMC_5_0_PHY_FUNC_CONTROL \ + (XENON_EMMC_5_0_PHY_REG_BASE + 0x4) +#define XENON_ASYNC_DDRMODE_MASK BIT(23) +#define XENON_ASYNC_DDRMODE_SHIFT 23 +#define XENON_CMD_DDR_MODE BIT(16) +#define XENON_DQ_DDR_MODE_SHIFT 8 +#define XENON_DQ_DDR_MODE_MASK 0xFF +#define XENON_DQ_ASYNC_MODE BIT(4) + +#define XENON_EMMC_PHY_PAD_CONTROL (XENON_EMMC_PHY_REG_BASE + 0x8) +#define XENON_EMMC_5_0_PHY_PAD_CONTROL \ + (XENON_EMMC_5_0_PHY_REG_BASE + 0x8) +#define XENON_REC_EN_SHIFT 24 +#define XENON_REC_EN_MASK 0xF +#define XENON_FC_DQ_RECEN BIT(24) +#define XENON_FC_CMD_RECEN BIT(25) +#define XENON_FC_QSP_RECEN BIT(26) +#define XENON_FC_QSN_RECEN BIT(27) +#define XENON_OEN_QSN BIT(28) +#define XENON_AUTO_RECEN_CTRL BIT(30) +#define XENON_FC_ALL_CMOS_RECEIVER 0xF000 + +#define XENON_EMMC5_FC_QSP_PD BIT(18) +#define XENON_EMMC5_FC_QSP_PU BIT(22) +#define XENON_EMMC5_FC_CMD_PD BIT(17) +#define XENON_EMMC5_FC_CMD_PU BIT(21) +#define XENON_EMMC5_FC_DQ_PD BIT(16) +#define XENON_EMMC5_FC_DQ_PU BIT(20) + +#define XENON_EMMC_PHY_PAD_CONTROL1 (XENON_EMMC_PHY_REG_BASE + 0xC) +#define XENON_EMMC5_1_FC_QSP_PD BIT(9) +#define XENON_EMMC5_1_FC_QSP_PU BIT(25) +#define XENON_EMMC5_1_FC_CMD_PD BIT(8) +#define XENON_EMMC5_1_FC_CMD_PU BIT(24) +#define XENON_EMMC5_1_FC_DQ_PD 0xFF +#define XENON_EMMC5_1_FC_DQ_PU (0xFF << 16) + +#define XENON_EMMC_PHY_PAD_CONTROL2 (XENON_EMMC_PHY_REG_BASE + 0x10) +#define XENON_EMMC_5_0_PHY_PAD_CONTROL2 \ + (XENON_EMMC_5_0_PHY_REG_BASE + 0xC) +#define XENON_ZNR_MASK 0x1F +#define XENON_ZNR_SHIFT 8 +#define XENON_ZPR_MASK 0x1F +/* Preferred ZNR and ZPR value vary between different boards. + * The specific ZNR and ZPR value should be defined here + * according to board actual timing. + */ +#define XENON_ZNR_DEF_VALUE 0xF +#define XENON_ZPR_DEF_VALUE 0xF + +#define XENON_EMMC_PHY_DLL_CONTROL (XENON_EMMC_PHY_REG_BASE + 0x14) +#define XENON_EMMC_5_0_PHY_DLL_CONTROL \ + (XENON_EMMC_5_0_PHY_REG_BASE + 0x10) +#define XENON_DLL_ENABLE BIT(31) +#define XENON_DLL_UPDATE_STROBE_5_0 BIT(30) +#define XENON_DLL_REFCLK_SEL BIT(30) +#define XENON_DLL_UPDATE BIT(23) +#define XENON_DLL_PHSEL1_SHIFT 24 +#define XENON_DLL_PHSEL0_SHIFT 16 +#define XENON_DLL_PHASE_MASK 0x3F +#define XENON_DLL_PHASE_90_DEGREE 0x1F +#define XENON_DLL_FAST_LOCK BIT(5) +#define XENON_DLL_GAIN2X BIT(3) +#define XENON_DLL_BYPASS_EN BIT(0) + +#define XENON_EMMC_5_0_PHY_LOGIC_TIMING_ADJUST \ + (XENON_EMMC_5_0_PHY_REG_BASE + 0x14) +#define XENON_EMMC_5_0_PHY_LOGIC_TIMING_VALUE 0x5A54 +#define XENON_EMMC_PHY_LOGIC_TIMING_ADJUST (XENON_EMMC_PHY_REG_BASE + 0x18) +#define XENON_LOGIC_TIMING_VALUE 0x00AA8977 + +/* + * List offset of PHY registers and some special register values + * in eMMC PHY 5.0 or eMMC PHY 5.1 + */ +struct xenon_emmc_phy_regs { + /* Offset of Timing Adjust register */ + u16 timing_adj; + /* Offset of Func Control register */ + u16 func_ctrl; + /* Offset of Pad Control register */ + u16 pad_ctrl; + /* Offset of Pad Control register 2 */ + u16 pad_ctrl2; + /* Offset of DLL Control register */ + u16 dll_ctrl; + /* Offset of Logic Timing Adjust register */ + u16 logic_timing_adj; + /* DLL Update Enable bit */ + u32 dll_update; + /* value in Logic Timing Adjustment register */ + u32 logic_timing_val; +}; + +static const char * const phy_types[] = { + "emmc 5.0 phy", + "emmc 5.1 phy" +}; + +enum xenon_phy_type_enum { + EMMC_5_0_PHY, + EMMC_5_1_PHY, + NR_PHY_TYPES +}; + +enum soc_pad_ctrl_type { + SOC_PAD_SD, + SOC_PAD_FIXED_1_8V, +}; + +struct soc_pad_ctrl { + /* Register address of SoC PHY PAD ctrl */ + void __iomem *reg; + /* SoC PHY PAD ctrl type */ + enum soc_pad_ctrl_type pad_type; + /* SoC specific operation to set SoC PHY PAD */ + void (*set_soc_pad)(struct sdhci_host *host, + unsigned char signal_voltage); +}; + +static struct xenon_emmc_phy_regs xenon_emmc_5_0_phy_regs = { + .timing_adj = XENON_EMMC_5_0_PHY_TIMING_ADJUST, + .func_ctrl = XENON_EMMC_5_0_PHY_FUNC_CONTROL, + .pad_ctrl = XENON_EMMC_5_0_PHY_PAD_CONTROL, + .pad_ctrl2 = XENON_EMMC_5_0_PHY_PAD_CONTROL2, + .dll_ctrl = XENON_EMMC_5_0_PHY_DLL_CONTROL, + .logic_timing_adj = XENON_EMMC_5_0_PHY_LOGIC_TIMING_ADJUST, + .dll_update = XENON_DLL_UPDATE_STROBE_5_0, + .logic_timing_val = XENON_EMMC_5_0_PHY_LOGIC_TIMING_VALUE, +}; + +static struct xenon_emmc_phy_regs xenon_emmc_5_1_phy_regs = { + .timing_adj = XENON_EMMC_PHY_TIMING_ADJUST, + .func_ctrl = XENON_EMMC_PHY_FUNC_CONTROL, + .pad_ctrl = XENON_EMMC_PHY_PAD_CONTROL, + .pad_ctrl2 = XENON_EMMC_PHY_PAD_CONTROL2, + .dll_ctrl = XENON_EMMC_PHY_DLL_CONTROL, + .logic_timing_adj = XENON_EMMC_PHY_LOGIC_TIMING_ADJUST, + .dll_update = XENON_DLL_UPDATE, + .logic_timing_val = XENON_LOGIC_TIMING_VALUE, +}; + +/* + * eMMC PHY configuration and operations + */ +struct xenon_emmc_phy_params { + bool slow_mode; + + u8 znr; + u8 zpr; + + /* Nr of consecutive Sampling Points of a Valid Sampling Window */ + u8 nr_tun_times; + /* Divider for calculating Tuning Step */ + u8 tun_step_divider; + + struct soc_pad_ctrl pad_ctrl; +}; + +static int xenon_alloc_emmc_phy(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + struct xenon_emmc_phy_params *params; + + params = devm_kzalloc(mmc_dev(host->mmc), sizeof(*params), GFP_KERNEL); + if (!params) + return -ENOMEM; + + priv->phy_params = params; + if (priv->phy_type == EMMC_5_0_PHY) + priv->emmc_phy_regs = &xenon_emmc_5_0_phy_regs; + else + priv->emmc_phy_regs = &xenon_emmc_5_1_phy_regs; + + return 0; +} + +/* + * eMMC 5.0/5.1 PHY init/re-init. + * eMMC PHY init should be executed after: + * 1. SDCLK frequency changes. + * 2. SDCLK is stopped and re-enabled. + * 3. config in emmc_phy_regs->timing_adj and emmc_phy_regs->func_ctrl + * are changed + */ +static int xenon_emmc_phy_init(struct sdhci_host *host) +{ + u32 reg; + u32 wait, clock; + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs; + + reg = sdhci_readl(host, phy_regs->timing_adj); + reg |= XENON_PHY_INITIALIZAION; + sdhci_writel(host, reg, phy_regs->timing_adj); + + /* Add duration of FC_SYNC_RST */ + wait = ((reg >> XENON_FC_SYNC_RST_DURATION_SHIFT) & + XENON_FC_SYNC_RST_DURATION_MASK); + /* Add interval between FC_SYNC_EN and FC_SYNC_RST */ + wait += ((reg >> XENON_FC_SYNC_RST_EN_DURATION_SHIFT) & + XENON_FC_SYNC_RST_EN_DURATION_MASK); + /* Add duration of asserting FC_SYNC_EN */ + wait += ((reg >> XENON_FC_SYNC_EN_DURATION_SHIFT) & + XENON_FC_SYNC_EN_DURATION_MASK); + /* Add duration of waiting for PHY */ + wait += ((reg >> XENON_WAIT_CYCLE_BEFORE_USING_SHIFT) & + XENON_WAIT_CYCLE_BEFORE_USING_MASK); + /* 4 additional bus clock and 4 AXI bus clock are required */ + wait += 8; + wait <<= 20; + + clock = host->clock; + if (!clock) + /* Use the possibly slowest bus frequency value */ + clock = XENON_LOWEST_SDCLK_FREQ; + /* get the wait time */ + wait /= clock; + wait++; + /* wait for host eMMC PHY init completes */ + udelay(wait); + + reg = sdhci_readl(host, phy_regs->timing_adj); + reg &= XENON_PHY_INITIALIZAION; + if (reg) { + dev_err(mmc_dev(host->mmc), "eMMC PHY init cannot complete after %d us\n", + wait); + return -ETIMEDOUT; + } + + return 0; +} + +#define ARMADA_3700_SOC_PAD_1_8V 0x1 +#define ARMADA_3700_SOC_PAD_3_3V 0x0 + +static void armada_3700_soc_pad_voltage_set(struct sdhci_host *host, + unsigned char signal_voltage) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + struct xenon_emmc_phy_params *params = priv->phy_params; + + if (params->pad_ctrl.pad_type == SOC_PAD_FIXED_1_8V) { + writel(ARMADA_3700_SOC_PAD_1_8V, params->pad_ctrl.reg); + } else if (params->pad_ctrl.pad_type == SOC_PAD_SD) { + if (signal_voltage == MMC_SIGNAL_VOLTAGE_180) + writel(ARMADA_3700_SOC_PAD_1_8V, params->pad_ctrl.reg); + else if (signal_voltage == MMC_SIGNAL_VOLTAGE_330) + writel(ARMADA_3700_SOC_PAD_3_3V, params->pad_ctrl.reg); + } +} + +/* + * Set SoC PHY voltage PAD control register, + * according to the operation voltage on PAD. + * The detailed operation depends on SoC implementation. + */ +static void xenon_emmc_phy_set_soc_pad(struct sdhci_host *host, + unsigned char signal_voltage) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + struct xenon_emmc_phy_params *params = priv->phy_params; + + if (!params->pad_ctrl.reg) + return; + + if (params->pad_ctrl.set_soc_pad) + params->pad_ctrl.set_soc_pad(host, signal_voltage); +} + +/* + * Enable eMMC PHY HW DLL + * DLL should be enabled and stable before HS200/SDR104 tuning, + * and before HS400 data strobe setting. + */ +static int xenon_emmc_phy_enable_dll(struct sdhci_host *host) +{ + u32 reg; + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs; + ktime_t timeout; + + if (WARN_ON(host->clock <= MMC_HIGH_52_MAX_DTR)) + return -EINVAL; + + reg = sdhci_readl(host, phy_regs->dll_ctrl); + if (reg & XENON_DLL_ENABLE) + return 0; + + /* Enable DLL */ + reg = sdhci_readl(host, phy_regs->dll_ctrl); + reg |= (XENON_DLL_ENABLE | XENON_DLL_FAST_LOCK); + + /* + * Set Phase as 90 degree, which is most common value. + * Might set another value if necessary. + * The granularity is 1 degree. + */ + reg &= ~((XENON_DLL_PHASE_MASK << XENON_DLL_PHSEL0_SHIFT) | + (XENON_DLL_PHASE_MASK << XENON_DLL_PHSEL1_SHIFT)); + reg |= ((XENON_DLL_PHASE_90_DEGREE << XENON_DLL_PHSEL0_SHIFT) | + (XENON_DLL_PHASE_90_DEGREE << XENON_DLL_PHSEL1_SHIFT)); + + reg &= ~XENON_DLL_BYPASS_EN; + reg |= phy_regs->dll_update; + if (priv->phy_type == EMMC_5_1_PHY) + reg &= ~XENON_DLL_REFCLK_SEL; + sdhci_writel(host, reg, phy_regs->dll_ctrl); + + /* Wait max 32 ms */ + timeout = ktime_add_ms(ktime_get(), 32); + while (1) { + bool timedout = ktime_after(ktime_get(), timeout); + + if (sdhci_readw(host, XENON_SLOT_EXT_PRESENT_STATE) & + XENON_DLL_LOCK_STATE) + break; + if (timedout) { + dev_err(mmc_dev(host->mmc), "Wait for DLL Lock time-out\n"); + return -ETIMEDOUT; + } + udelay(100); + } + return 0; +} + +/* + * Config to eMMC PHY to prepare for tuning. + * Enable HW DLL and set the TUNING_STEP + */ +static int xenon_emmc_phy_config_tuning(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + struct xenon_emmc_phy_params *params = priv->phy_params; + u32 reg, tuning_step; + int ret; + + if (host->clock <= MMC_HIGH_52_MAX_DTR) + return -EINVAL; + + ret = xenon_emmc_phy_enable_dll(host); + if (ret) + return ret; + + /* Achieve TUNING_STEP with HW DLL help */ + reg = sdhci_readl(host, XENON_SLOT_DLL_CUR_DLY_VAL); + tuning_step = reg / params->tun_step_divider; + if (unlikely(tuning_step > XENON_TUNING_STEP_MASK)) { + dev_warn(mmc_dev(host->mmc), + "HS200 TUNING_STEP %d is larger than MAX value\n", + tuning_step); + tuning_step = XENON_TUNING_STEP_MASK; + } + + /* Set TUNING_STEP for later tuning */ + reg = sdhci_readl(host, XENON_SLOT_OP_STATUS_CTRL); + reg &= ~(XENON_TUN_CONSECUTIVE_TIMES_MASK << + XENON_TUN_CONSECUTIVE_TIMES_SHIFT); + reg |= (params->nr_tun_times << XENON_TUN_CONSECUTIVE_TIMES_SHIFT); + reg &= ~(XENON_TUNING_STEP_MASK << XENON_TUNING_STEP_SHIFT); + reg |= (tuning_step << XENON_TUNING_STEP_SHIFT); + sdhci_writel(host, reg, XENON_SLOT_OP_STATUS_CTRL); + + return 0; +} + +static void xenon_emmc_phy_disable_strobe(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + u32 reg; + + /* Disable both SDHC Data Strobe and Enhanced Strobe */ + reg = sdhci_readl(host, XENON_SLOT_EMMC_CTRL); + reg &= ~(XENON_ENABLE_DATA_STROBE | XENON_ENABLE_RESP_STROBE); + sdhci_writel(host, reg, XENON_SLOT_EMMC_CTRL); + + /* Clear Strobe line Pull down or Pull up */ + if (priv->phy_type == EMMC_5_0_PHY) { + reg = sdhci_readl(host, XENON_EMMC_5_0_PHY_PAD_CONTROL); + reg &= ~(XENON_EMMC5_FC_QSP_PD | XENON_EMMC5_FC_QSP_PU); + sdhci_writel(host, reg, XENON_EMMC_5_0_PHY_PAD_CONTROL); + } else { + reg = sdhci_readl(host, XENON_EMMC_PHY_PAD_CONTROL1); + reg &= ~(XENON_EMMC5_1_FC_QSP_PD | XENON_EMMC5_1_FC_QSP_PU); + sdhci_writel(host, reg, XENON_EMMC_PHY_PAD_CONTROL1); + } +} + +/* Set HS400 Data Strobe and Enhanced Strobe */ +static void xenon_emmc_phy_strobe_delay_adj(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + u32 reg; + + if (WARN_ON(host->timing != MMC_TIMING_MMC_HS400)) + return; + + if (host->clock <= MMC_HIGH_52_MAX_DTR) + return; + + dev_dbg(mmc_dev(host->mmc), "starts HS400 strobe delay adjustment\n"); + + xenon_emmc_phy_enable_dll(host); + + /* Enable SDHC Data Strobe */ + reg = sdhci_readl(host, XENON_SLOT_EMMC_CTRL); + reg |= XENON_ENABLE_DATA_STROBE; + /* + * Enable SDHC Enhanced Strobe if supported + * Xenon Enhanced Strobe should be enabled only when + * 1. card is in HS400 mode and + * 2. SDCLK is higher than 52MHz + * 3. DLL is enabled + */ + if (host->mmc->ios.enhanced_strobe) + reg |= XENON_ENABLE_RESP_STROBE; + sdhci_writel(host, reg, XENON_SLOT_EMMC_CTRL); + + /* Set Data Strobe Pull down */ + if (priv->phy_type == EMMC_5_0_PHY) { + reg = sdhci_readl(host, XENON_EMMC_5_0_PHY_PAD_CONTROL); + reg |= XENON_EMMC5_FC_QSP_PD; + reg &= ~XENON_EMMC5_FC_QSP_PU; + sdhci_writel(host, reg, XENON_EMMC_5_0_PHY_PAD_CONTROL); + } else { + reg = sdhci_readl(host, XENON_EMMC_PHY_PAD_CONTROL1); + reg |= XENON_EMMC5_1_FC_QSP_PD; + reg &= ~XENON_EMMC5_1_FC_QSP_PU; + sdhci_writel(host, reg, XENON_EMMC_PHY_PAD_CONTROL1); + } +} + +/* + * If eMMC PHY Slow Mode is required in lower speed mode (SDCLK < 55MHz) + * in SDR mode, enable Slow Mode to bypass eMMC PHY. + * SDIO slower SDR mode also requires Slow Mode. + * + * If Slow Mode is enabled, return true. + * Otherwise, return false. + */ +static bool xenon_emmc_phy_slow_mode(struct sdhci_host *host, + unsigned char timing) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + struct xenon_emmc_phy_params *params = priv->phy_params; + struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs; + u32 reg; + int ret; + + if (host->clock > MMC_HIGH_52_MAX_DTR) + return false; + + reg = sdhci_readl(host, phy_regs->timing_adj); + /* When in slower SDR mode, enable Slow Mode for SDIO + * or when Slow Mode flag is set + */ + switch (timing) { + case MMC_TIMING_LEGACY: + /* + * If Slow Mode is required, enable Slow Mode by default + * in early init phase to avoid any potential issue. + */ + if (params->slow_mode) { + reg |= XENON_TIMING_ADJUST_SLOW_MODE; + ret = true; + } else { + reg &= ~XENON_TIMING_ADJUST_SLOW_MODE; + ret = false; + } + break; + case MMC_TIMING_UHS_SDR25: + case MMC_TIMING_UHS_SDR12: + case MMC_TIMING_SD_HS: + case MMC_TIMING_MMC_HS: + if ((priv->init_card_type == MMC_TYPE_SDIO) || + params->slow_mode) { + reg |= XENON_TIMING_ADJUST_SLOW_MODE; + ret = true; + break; + } + fallthrough; + default: + reg &= ~XENON_TIMING_ADJUST_SLOW_MODE; + ret = false; + } + + sdhci_writel(host, reg, phy_regs->timing_adj); + return ret; +} + +/* + * Set-up eMMC 5.0/5.1 PHY. + * Specific configuration depends on the current speed mode in use. + */ +static void xenon_emmc_phy_set(struct sdhci_host *host, + unsigned char timing) +{ + u32 reg; + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + struct xenon_emmc_phy_params *params = priv->phy_params; + struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs; + + dev_dbg(mmc_dev(host->mmc), "eMMC PHY setting starts\n"); + + /* Setup pad, set bit[28] and bits[26:24] */ + reg = sdhci_readl(host, phy_regs->pad_ctrl); + reg |= (XENON_FC_DQ_RECEN | XENON_FC_CMD_RECEN | + XENON_FC_QSP_RECEN | XENON_OEN_QSN); + /* All FC_XX_RECEIVCE should be set as CMOS Type */ + reg |= XENON_FC_ALL_CMOS_RECEIVER; + sdhci_writel(host, reg, phy_regs->pad_ctrl); + + /* Set CMD and DQ Pull Up */ + if (priv->phy_type == EMMC_5_0_PHY) { + reg = sdhci_readl(host, XENON_EMMC_5_0_PHY_PAD_CONTROL); + reg |= (XENON_EMMC5_FC_CMD_PU | XENON_EMMC5_FC_DQ_PU); + reg &= ~(XENON_EMMC5_FC_CMD_PD | XENON_EMMC5_FC_DQ_PD); + sdhci_writel(host, reg, XENON_EMMC_5_0_PHY_PAD_CONTROL); + } else { + reg = sdhci_readl(host, XENON_EMMC_PHY_PAD_CONTROL1); + reg |= (XENON_EMMC5_1_FC_CMD_PU | XENON_EMMC5_1_FC_DQ_PU); + reg &= ~(XENON_EMMC5_1_FC_CMD_PD | XENON_EMMC5_1_FC_DQ_PD); + sdhci_writel(host, reg, XENON_EMMC_PHY_PAD_CONTROL1); + } + + if (timing == MMC_TIMING_LEGACY) { + xenon_emmc_phy_slow_mode(host, timing); + goto phy_init; + } + + /* + * If SDIO card, set SDIO Mode + * Otherwise, clear SDIO Mode + */ + reg = sdhci_readl(host, phy_regs->timing_adj); + if (priv->init_card_type == MMC_TYPE_SDIO) + reg |= XENON_TIMING_ADJUST_SDIO_MODE; + else + reg &= ~XENON_TIMING_ADJUST_SDIO_MODE; + sdhci_writel(host, reg, phy_regs->timing_adj); + + if (xenon_emmc_phy_slow_mode(host, timing)) + goto phy_init; + + /* + * Set preferred ZNR and ZPR value + * The ZNR and ZPR value vary between different boards. + * Define them both in sdhci-xenon-emmc-phy.h. + */ + reg = sdhci_readl(host, phy_regs->pad_ctrl2); + reg &= ~((XENON_ZNR_MASK << XENON_ZNR_SHIFT) | XENON_ZPR_MASK); + reg |= ((params->znr << XENON_ZNR_SHIFT) | params->zpr); + sdhci_writel(host, reg, phy_regs->pad_ctrl2); + + /* + * When setting EMMC_PHY_FUNC_CONTROL register, + * SD clock should be disabled + */ + reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL); + reg &= ~SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL); + + reg = sdhci_readl(host, phy_regs->func_ctrl); + switch (timing) { + case MMC_TIMING_MMC_HS400: + reg |= (XENON_DQ_DDR_MODE_MASK << XENON_DQ_DDR_MODE_SHIFT) | + XENON_CMD_DDR_MODE; + reg &= ~XENON_DQ_ASYNC_MODE; + break; + case MMC_TIMING_UHS_DDR50: + case MMC_TIMING_MMC_DDR52: + reg |= (XENON_DQ_DDR_MODE_MASK << XENON_DQ_DDR_MODE_SHIFT) | + XENON_CMD_DDR_MODE | XENON_DQ_ASYNC_MODE; + break; + default: + reg &= ~((XENON_DQ_DDR_MODE_MASK << XENON_DQ_DDR_MODE_SHIFT) | + XENON_CMD_DDR_MODE); + reg |= XENON_DQ_ASYNC_MODE; + } + sdhci_writel(host, reg, phy_regs->func_ctrl); + + /* Enable bus clock */ + reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL); + reg |= SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL); + + if (timing == MMC_TIMING_MMC_HS400) + /* Hardware team recommend a value for HS400 */ + sdhci_writel(host, phy_regs->logic_timing_val, + phy_regs->logic_timing_adj); + else + xenon_emmc_phy_disable_strobe(host); + +phy_init: + xenon_emmc_phy_init(host); + + dev_dbg(mmc_dev(host->mmc), "eMMC PHY setting completes\n"); +} + +static int get_dt_pad_ctrl_data(struct sdhci_host *host, + struct device_node *np, + struct xenon_emmc_phy_params *params) +{ + int ret = 0; + const char *name; + struct resource iomem; + + if (of_device_is_compatible(np, "marvell,armada-3700-sdhci")) + params->pad_ctrl.set_soc_pad = armada_3700_soc_pad_voltage_set; + else + return 0; + + if (of_address_to_resource(np, 1, &iomem)) { + dev_err(mmc_dev(host->mmc), "Unable to find SoC PAD ctrl register address for %pOFn\n", + np); + return -EINVAL; + } + + params->pad_ctrl.reg = devm_ioremap_resource(mmc_dev(host->mmc), + &iomem); + if (IS_ERR(params->pad_ctrl.reg)) + return PTR_ERR(params->pad_ctrl.reg); + + ret = of_property_read_string(np, "marvell,pad-type", &name); + if (ret) { + dev_err(mmc_dev(host->mmc), "Unable to determine SoC PHY PAD ctrl type\n"); + return ret; + } + if (!strcmp(name, "sd")) { + params->pad_ctrl.pad_type = SOC_PAD_SD; + } else if (!strcmp(name, "fixed-1-8v")) { + params->pad_ctrl.pad_type = SOC_PAD_FIXED_1_8V; + } else { + dev_err(mmc_dev(host->mmc), "Unsupported SoC PHY PAD ctrl type %s\n", + name); + return -EINVAL; + } + + return ret; +} + +static int xenon_emmc_phy_parse_param_dt(struct sdhci_host *host, + struct device_node *np, + struct xenon_emmc_phy_params *params) +{ + u32 value; + + params->slow_mode = false; + if (of_property_read_bool(np, "marvell,xenon-phy-slow-mode")) + params->slow_mode = true; + + params->znr = XENON_ZNR_DEF_VALUE; + if (!of_property_read_u32(np, "marvell,xenon-phy-znr", &value)) + params->znr = value & XENON_ZNR_MASK; + + params->zpr = XENON_ZPR_DEF_VALUE; + if (!of_property_read_u32(np, "marvell,xenon-phy-zpr", &value)) + params->zpr = value & XENON_ZPR_MASK; + + params->nr_tun_times = XENON_TUN_CONSECUTIVE_TIMES; + if (!of_property_read_u32(np, "marvell,xenon-phy-nr-success-tun", + &value)) + params->nr_tun_times = value & XENON_TUN_CONSECUTIVE_TIMES_MASK; + + params->tun_step_divider = XENON_TUNING_STEP_DIVIDER; + if (!of_property_read_u32(np, "marvell,xenon-phy-tun-step-divider", + &value)) + params->tun_step_divider = value & 0xFF; + + return get_dt_pad_ctrl_data(host, np, params); +} + +/* Set SoC PHY Voltage PAD */ +void xenon_soc_pad_ctrl(struct sdhci_host *host, + unsigned char signal_voltage) +{ + xenon_emmc_phy_set_soc_pad(host, signal_voltage); +} + +/* + * Setting PHY when card is working in High Speed Mode. + * HS400 set Data Strobe and Enhanced Strobe if it is supported. + * HS200/SDR104 set tuning config to prepare for tuning. + */ +static int xenon_hs_delay_adj(struct sdhci_host *host) +{ + int ret = 0; + + if (WARN_ON(host->clock <= XENON_DEFAULT_SDCLK_FREQ)) + return -EINVAL; + + switch (host->timing) { + case MMC_TIMING_MMC_HS400: + xenon_emmc_phy_strobe_delay_adj(host); + return 0; + case MMC_TIMING_MMC_HS200: + case MMC_TIMING_UHS_SDR104: + return xenon_emmc_phy_config_tuning(host); + case MMC_TIMING_MMC_DDR52: + case MMC_TIMING_UHS_DDR50: + /* + * DDR Mode requires driver to scan Sampling Fixed Delay Line, + * to find out a perfect operation sampling point. + * It is hard to implement such a scan in host driver + * since initiating commands by host driver is not safe. + * Thus so far just keep PHY Sampling Fixed Delay in + * default value of DDR mode. + * + * If any timing issue occurs in DDR mode on Marvell products, + * please contact maintainer for internal support in Marvell. + */ + dev_warn_once(mmc_dev(host->mmc), "Timing issue might occur in DDR mode\n"); + return 0; + } + + return ret; +} + +/* + * Adjust PHY setting. + * PHY setting should be adjusted when SDCLK frequency, Bus Width + * or Speed Mode is changed. + * Additional config are required when card is working in High Speed mode, + * after leaving Legacy Mode. + */ +int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + int ret = 0; + + if (!host->clock) { + priv->clock = 0; + return 0; + } + + /* + * The timing, frequency or bus width is changed, + * better to set eMMC PHY based on current setting + * and adjust Xenon SDHC delay. + */ + if ((host->clock == priv->clock) && + (ios->bus_width == priv->bus_width) && + (ios->timing == priv->timing)) + return 0; + + xenon_emmc_phy_set(host, ios->timing); + + /* Update the record */ + priv->bus_width = ios->bus_width; + + priv->timing = ios->timing; + priv->clock = host->clock; + + /* Legacy mode is a special case */ + if (ios->timing == MMC_TIMING_LEGACY) + return 0; + + if (host->clock > XENON_DEFAULT_SDCLK_FREQ) + ret = xenon_hs_delay_adj(host); + return ret; +} + +static int xenon_add_phy(struct device_node *np, struct sdhci_host *host, + const char *phy_name) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host); + int ret; + + priv->phy_type = match_string(phy_types, NR_PHY_TYPES, phy_name); + if (priv->phy_type < 0) { + dev_err(mmc_dev(host->mmc), + "Unable to determine PHY name %s. Use default eMMC 5.1 PHY\n", + phy_name); + priv->phy_type = EMMC_5_1_PHY; + } + + ret = xenon_alloc_emmc_phy(host); + if (ret) + return ret; + + return xenon_emmc_phy_parse_param_dt(host, np, priv->phy_params); +} + +int xenon_phy_parse_dt(struct device_node *np, struct sdhci_host *host) +{ + const char *phy_type = NULL; + + if (!of_property_read_string(np, "marvell,xenon-phy-type", &phy_type)) + return xenon_add_phy(np, host, phy_type); + + return xenon_add_phy(np, host, "emmc 5.1 phy"); +} |