diff options
Diffstat (limited to '')
-rw-r--r-- | drivers/mtd/chips/Kconfig | 243 | ||||
-rw-r--r-- | drivers/mtd/chips/Makefile | 16 | ||||
-rw-r--r-- | drivers/mtd/chips/cfi_cmdset_0001.c | 2706 | ||||
-rw-r--r-- | drivers/mtd/chips/cfi_cmdset_0002.c | 3109 | ||||
-rw-r--r-- | drivers/mtd/chips/cfi_cmdset_0020.c | 1399 | ||||
-rw-r--r-- | drivers/mtd/chips/cfi_probe.c | 462 | ||||
-rw-r--r-- | drivers/mtd/chips/cfi_util.c | 445 | ||||
-rw-r--r-- | drivers/mtd/chips/chipreg.c | 105 | ||||
-rw-r--r-- | drivers/mtd/chips/fwh_lock.h | 108 | ||||
-rw-r--r-- | drivers/mtd/chips/gen_probe.c | 267 | ||||
-rw-r--r-- | drivers/mtd/chips/jedec_probe.c | 2315 | ||||
-rw-r--r-- | drivers/mtd/chips/map_absent.c | 113 | ||||
-rw-r--r-- | drivers/mtd/chips/map_ram.c | 158 | ||||
-rw-r--r-- | drivers/mtd/chips/map_rom.c | 132 |
14 files changed, 11578 insertions, 0 deletions
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig new file mode 100644 index 000000000..19726ebd9 --- /dev/null +++ b/drivers/mtd/chips/Kconfig @@ -0,0 +1,243 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "RAM/ROM/Flash chip drivers" + depends on MTD!=n + +config MTD_CFI + tristate "Detect flash chips by Common Flash Interface (CFI) probe" + select MTD_GEN_PROBE + select MTD_CFI_UTIL + help + The Common Flash Interface specification was developed by Intel, + AMD and other flash manufactures that provides a universal method + for probing the capabilities of flash devices. If you wish to + support any device that is CFI-compliant, you need to enable this + option. Visit <https://www.amd.com/products/nvd/overview/cfi.html> + for more information on CFI. + +config MTD_JEDECPROBE + tristate "Detect non-CFI AMD/JEDEC-compatible flash chips" + select MTD_GEN_PROBE + select MTD_CFI_UTIL + help + This option enables JEDEC-style probing of flash chips which are not + compatible with the Common Flash Interface, but will use the common + CFI-targeted flash drivers for any chips which are identified which + are in fact compatible in all but the probe method. This actually + covers most AMD/Fujitsu-compatible chips and also non-CFI + Intel chips. + +config MTD_GEN_PROBE + tristate + +config MTD_CFI_ADV_OPTIONS + bool "Flash chip driver advanced configuration options" + depends on MTD_GEN_PROBE + help + If you need to specify a specific endianness for access to flash + chips, or if you wish to reduce the size of the kernel by including + support for only specific arrangements of flash chips, say 'Y'. This + option does not directly affect the code, but will enable other + configuration options which allow you to do so. + + If unsure, say 'N'. + +choice + prompt "Flash cmd/query data swapping" + depends on MTD_CFI_ADV_OPTIONS + default MTD_CFI_NOSWAP + help + This option defines the way in which the CPU attempts to arrange + data bits when writing the 'magic' commands to the chips. Saying + 'NO', which is the default when CONFIG_MTD_CFI_ADV_OPTIONS isn't + enabled, means that the CPU will not do any swapping; the chips + are expected to be wired to the CPU in 'host-endian' form. + Specific arrangements are possible with the BIG_ENDIAN_BYTE and + LITTLE_ENDIAN_BYTE, if the bytes are reversed. + +config MTD_CFI_NOSWAP + depends on !ARCH_IXP4XX || CPU_BIG_ENDIAN + bool "NO" + +config MTD_CFI_BE_BYTE_SWAP + bool "BIG_ENDIAN_BYTE" + +config MTD_CFI_LE_BYTE_SWAP + depends on !ARCH_IXP4XX + bool "LITTLE_ENDIAN_BYTE" + +endchoice + +config MTD_CFI_GEOMETRY + bool "Specific CFI Flash geometry selection" + depends on MTD_CFI_ADV_OPTIONS + select MTD_MAP_BANK_WIDTH_1 if !(MTD_MAP_BANK_WIDTH_2 || \ + MTD_MAP_BANK_WIDTH_4 || MTD_MAP_BANK_WIDTH_8 || \ + MTD_MAP_BANK_WIDTH_16 || MTD_MAP_BANK_WIDTH_32) + select MTD_CFI_I1 if !(MTD_CFI_I2 || MTD_CFI_I4 || MTD_CFI_I8) + help + This option does not affect the code directly, but will enable + some other configuration options which would allow you to reduce + the size of the kernel by including support for only certain + arrangements of CFI chips. If unsure, say 'N' and all options + which are supported by the current code will be enabled. + +config MTD_MAP_BANK_WIDTH_1 + bool "Support 8-bit buswidth" if MTD_CFI_GEOMETRY + default y + help + If you wish to support CFI devices on a physical bus which is + 8 bits wide, say 'Y'. + +config MTD_MAP_BANK_WIDTH_2 + bool "Support 16-bit buswidth" if MTD_CFI_GEOMETRY + default y + help + If you wish to support CFI devices on a physical bus which is + 16 bits wide, say 'Y'. + +config MTD_MAP_BANK_WIDTH_4 + bool "Support 32-bit buswidth" if MTD_CFI_GEOMETRY + default y + help + If you wish to support CFI devices on a physical bus which is + 32 bits wide, say 'Y'. + +config MTD_MAP_BANK_WIDTH_8 + bool "Support 64-bit buswidth" if MTD_CFI_GEOMETRY + default n + help + If you wish to support CFI devices on a physical bus which is + 64 bits wide, say 'Y'. + +config MTD_MAP_BANK_WIDTH_16 + bool "Support 128-bit buswidth" if MTD_CFI_GEOMETRY + default n + help + If you wish to support CFI devices on a physical bus which is + 128 bits wide, say 'Y'. + +config MTD_MAP_BANK_WIDTH_32 + bool "Support 256-bit buswidth" if MTD_CFI_GEOMETRY + select MTD_COMPLEX_MAPPINGS if HAS_IOMEM + default n + help + If you wish to support CFI devices on a physical bus which is + 256 bits wide, say 'Y'. + +config MTD_CFI_I1 + bool "Support 1-chip flash interleave" if MTD_CFI_GEOMETRY + default y + help + If your flash chips are not interleaved - i.e. you only have one + flash chip addressed by each bus cycle, then say 'Y'. + +config MTD_CFI_I2 + bool "Support 2-chip flash interleave" if MTD_CFI_GEOMETRY + default y + help + If your flash chips are interleaved in pairs - i.e. you have two + flash chips addressed by each bus cycle, then say 'Y'. + +config MTD_CFI_I4 + bool "Support 4-chip flash interleave" if MTD_CFI_GEOMETRY + default n + help + If your flash chips are interleaved in fours - i.e. you have four + flash chips addressed by each bus cycle, then say 'Y'. + +config MTD_CFI_I8 + bool "Support 8-chip flash interleave" if MTD_CFI_GEOMETRY + default n + help + If your flash chips are interleaved in eights - i.e. you have eight + flash chips addressed by each bus cycle, then say 'Y'. + +config MTD_OTP + bool "Protection Registers aka one-time programmable (OTP) bits" + depends on MTD_CFI_ADV_OPTIONS + default n + help + This enables support for reading, writing and locking so called + "Protection Registers" present on some flash chips. + A subset of them are pre-programmed at the factory with a + unique set of values. The rest is user-programmable. + + The user-programmable Protection Registers contain one-time + programmable (OTP) bits; when programmed, register bits cannot be + erased. Each Protection Register can be accessed multiple times to + program individual bits, as long as the register remains unlocked. + + Each Protection Register has an associated Lock Register bit. When a + Lock Register bit is programmed, the associated Protection Register + can only be read; it can no longer be programmed. Additionally, + because the Lock Register bits themselves are OTP, when programmed, + Lock Register bits cannot be erased. Therefore, when a Protection + Register is locked, it cannot be unlocked. + + This feature should therefore be used with extreme care. Any mistake + in the programming of OTP bits will waste them. + +config MTD_CFI_INTELEXT + tristate "Support for CFI command set 0001 (Intel/Sharp chips)" + depends on MTD_GEN_PROBE + select MTD_CFI_UTIL + help + The Common Flash Interface defines a number of different command + sets which a CFI-compliant chip may claim to implement. This code + provides support for command set 0001, used on Intel StrataFlash + and other parts. + +config MTD_CFI_AMDSTD + tristate "Support for CFI command set 0002 (AMD/Fujitsu/Spansion chips)" + depends on MTD_GEN_PROBE + select MTD_CFI_UTIL + help + The Common Flash Interface defines a number of different command + sets which a CFI-compliant chip may claim to implement. This code + provides support for command set 0002, used on chips including + the AMD Am29LV320. + +config MTD_CFI_STAA + tristate "Support for CFI command set 0020 (ST (Advanced Architecture) chips)" + depends on MTD_GEN_PROBE + select MTD_CFI_UTIL + help + The Common Flash Interface defines a number of different command + sets which a CFI-compliant chip may claim to implement. This code + provides support for command set 0020. + +config MTD_CFI_UTIL + tristate + +config MTD_RAM + tristate "Support for RAM chips in bus mapping" + help + This option enables basic support for RAM chips accessed through + a bus mapping driver. + +config MTD_ROM + tristate "Support for ROM chips in bus mapping" + help + This option enables basic support for ROM chips accessed through + a bus mapping driver. + +config MTD_ABSENT + tristate "Support for absent chips in bus mapping" + help + This option enables support for a dummy probing driver used to + allocated placeholder MTD devices on systems that have socketed + or removable media. Use of this driver as a fallback chip probe + preserves the expected registration order of MTD device nodes on + the system regardless of media presence. Device nodes created + with this driver will return -ENODEV upon access. + +config MTD_XIP + bool "XIP aware MTD support" + depends on !SMP && (MTD_CFI_INTELEXT || MTD_CFI_AMDSTD) && ARCH_MTD_XIP + default y if XIP_KERNEL + help + This allows MTD support to work with flash memory which is also + used for XIP purposes. If you're not sure what this is all about + then say N. + +endmenu diff --git a/drivers/mtd/chips/Makefile b/drivers/mtd/chips/Makefile new file mode 100644 index 000000000..1f4e84f1c --- /dev/null +++ b/drivers/mtd/chips/Makefile @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# linux/drivers/chips/Makefile +# + +obj-$(CONFIG_MTD) += chipreg.o +obj-$(CONFIG_MTD_CFI) += cfi_probe.o +obj-$(CONFIG_MTD_CFI_UTIL) += cfi_util.o +obj-$(CONFIG_MTD_CFI_STAA) += cfi_cmdset_0020.o +obj-$(CONFIG_MTD_CFI_AMDSTD) += cfi_cmdset_0002.o +obj-$(CONFIG_MTD_CFI_INTELEXT) += cfi_cmdset_0001.o +obj-$(CONFIG_MTD_GEN_PROBE) += gen_probe.o +obj-$(CONFIG_MTD_JEDECPROBE) += jedec_probe.o +obj-$(CONFIG_MTD_RAM) += map_ram.o +obj-$(CONFIG_MTD_ROM) += map_rom.o +obj-$(CONFIG_MTD_ABSENT) += map_absent.o diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c new file mode 100644 index 000000000..a45a27c70 --- /dev/null +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -0,0 +1,2706 @@ +/* + * Common Flash Interface support: + * Intel Extended Vendor Command Set (ID 0x0001) + * + * (C) 2000 Red Hat. GPL'd + * + * + * 10/10/2000 Nicolas Pitre <nico@fluxnic.net> + * - completely revamped method functions so they are aware and + * independent of the flash geometry (buswidth, interleave, etc.) + * - scalability vs code size is completely set at compile-time + * (see include/linux/mtd/cfi.h for selection) + * - optimized write buffer method + * 02/05/2002 Christopher Hoover <ch@hpl.hp.com>/<ch@murgatroid.com> + * - reworked lock/unlock/erase support for var size flash + * 21/03/2007 Rodolfo Giometti <giometti@linux.it> + * - auto unlock sectors on resume for auto locking flash on power up + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <asm/io.h> +#include <asm/byteorder.h> + +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/reboot.h> +#include <linux/bitmap.h> +#include <linux/mtd/xip.h> +#include <linux/mtd/map.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/cfi.h> + +/* #define CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE */ +/* #define CMDSET0001_DISABLE_WRITE_SUSPEND */ + +// debugging, turns off buffer write mode if set to 1 +#define FORCE_WORD_WRITE 0 + +/* Intel chips */ +#define I82802AB 0x00ad +#define I82802AC 0x00ac +#define PF38F4476 0x881c +#define M28F00AP30 0x8963 +/* STMicroelectronics chips */ +#define M50LPW080 0x002F +#define M50FLW080A 0x0080 +#define M50FLW080B 0x0081 +/* Atmel chips */ +#define AT49BV640D 0x02de +#define AT49BV640DT 0x02db +/* Sharp chips */ +#define LH28F640BFHE_PTTL90 0x00b0 +#define LH28F640BFHE_PBTL90 0x00b1 +#define LH28F640BFHE_PTTL70A 0x00b2 +#define LH28F640BFHE_PBTL70A 0x00b3 + +static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); +static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); +static int cfi_intelext_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); +static int cfi_intelext_writev(struct mtd_info *, const struct kvec *, unsigned long, loff_t, size_t *); +static int cfi_intelext_erase_varsize(struct mtd_info *, struct erase_info *); +static void cfi_intelext_sync (struct mtd_info *); +static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +static int cfi_intelext_is_locked(struct mtd_info *mtd, loff_t ofs, + uint64_t len); +#ifdef CONFIG_MTD_OTP +static int cfi_intelext_read_fact_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *); +static int cfi_intelext_read_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *); +static int cfi_intelext_write_user_prot_reg (struct mtd_info *, loff_t, size_t, size_t *, u_char *); +static int cfi_intelext_lock_user_prot_reg (struct mtd_info *, loff_t, size_t); +static int cfi_intelext_get_fact_prot_info(struct mtd_info *, size_t, + size_t *, struct otp_info *); +static int cfi_intelext_get_user_prot_info(struct mtd_info *, size_t, + size_t *, struct otp_info *); +#endif +static int cfi_intelext_suspend (struct mtd_info *); +static void cfi_intelext_resume (struct mtd_info *); +static int cfi_intelext_reboot (struct notifier_block *, unsigned long, void *); + +static void cfi_intelext_destroy(struct mtd_info *); + +struct mtd_info *cfi_cmdset_0001(struct map_info *, int); + +static struct mtd_info *cfi_intelext_setup (struct mtd_info *); +static int cfi_intelext_partition_fixup(struct mtd_info *, struct cfi_private **); + +static int cfi_intelext_point (struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, resource_size_t *phys); +static int cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len); + +static int chip_ready (struct map_info *map, struct flchip *chip, unsigned long adr, int mode); +static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr, int mode); +static void put_chip(struct map_info *map, struct flchip *chip, unsigned long adr); +#include "fwh_lock.h" + + + +/* + * *********** SETUP AND PROBE BITS *********** + */ + +static struct mtd_chip_driver cfi_intelext_chipdrv = { + .probe = NULL, /* Not usable directly */ + .destroy = cfi_intelext_destroy, + .name = "cfi_cmdset_0001", + .module = THIS_MODULE +}; + +/* #define DEBUG_LOCK_BITS */ +/* #define DEBUG_CFI_FEATURES */ + +#ifdef DEBUG_CFI_FEATURES +static void cfi_tell_features(struct cfi_pri_intelext *extp) +{ + int i; + printk(" Extended Query version %c.%c\n", extp->MajorVersion, extp->MinorVersion); + printk(" Feature/Command Support: %4.4X\n", extp->FeatureSupport); + printk(" - Chip Erase: %s\n", extp->FeatureSupport&1?"supported":"unsupported"); + printk(" - Suspend Erase: %s\n", extp->FeatureSupport&2?"supported":"unsupported"); + printk(" - Suspend Program: %s\n", extp->FeatureSupport&4?"supported":"unsupported"); + printk(" - Legacy Lock/Unlock: %s\n", extp->FeatureSupport&8?"supported":"unsupported"); + printk(" - Queued Erase: %s\n", extp->FeatureSupport&16?"supported":"unsupported"); + printk(" - Instant block lock: %s\n", extp->FeatureSupport&32?"supported":"unsupported"); + printk(" - Protection Bits: %s\n", extp->FeatureSupport&64?"supported":"unsupported"); + printk(" - Page-mode read: %s\n", extp->FeatureSupport&128?"supported":"unsupported"); + printk(" - Synchronous read: %s\n", extp->FeatureSupport&256?"supported":"unsupported"); + printk(" - Simultaneous operations: %s\n", extp->FeatureSupport&512?"supported":"unsupported"); + printk(" - Extended Flash Array: %s\n", extp->FeatureSupport&1024?"supported":"unsupported"); + for (i=11; i<32; i++) { + if (extp->FeatureSupport & (1<<i)) + printk(" - Unknown Bit %X: supported\n", i); + } + + printk(" Supported functions after Suspend: %2.2X\n", extp->SuspendCmdSupport); + printk(" - Program after Erase Suspend: %s\n", extp->SuspendCmdSupport&1?"supported":"unsupported"); + for (i=1; i<8; i++) { + if (extp->SuspendCmdSupport & (1<<i)) + printk(" - Unknown Bit %X: supported\n", i); + } + + printk(" Block Status Register Mask: %4.4X\n", extp->BlkStatusRegMask); + printk(" - Lock Bit Active: %s\n", extp->BlkStatusRegMask&1?"yes":"no"); + printk(" - Lock-Down Bit Active: %s\n", extp->BlkStatusRegMask&2?"yes":"no"); + for (i=2; i<3; i++) { + if (extp->BlkStatusRegMask & (1<<i)) + printk(" - Unknown Bit %X Active: yes\n",i); + } + printk(" - EFA Lock Bit: %s\n", extp->BlkStatusRegMask&16?"yes":"no"); + printk(" - EFA Lock-Down Bit: %s\n", extp->BlkStatusRegMask&32?"yes":"no"); + for (i=6; i<16; i++) { + if (extp->BlkStatusRegMask & (1<<i)) + printk(" - Unknown Bit %X Active: yes\n",i); + } + + printk(" Vcc Logic Supply Optimum Program/Erase Voltage: %d.%d V\n", + extp->VccOptimal >> 4, extp->VccOptimal & 0xf); + if (extp->VppOptimal) + printk(" Vpp Programming Supply Optimum Program/Erase Voltage: %d.%d V\n", + extp->VppOptimal >> 4, extp->VppOptimal & 0xf); +} +#endif + +/* Atmel chips don't use the same PRI format as Intel chips */ +static void fixup_convert_atmel_pri(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + struct cfi_pri_intelext *extp = cfi->cmdset_priv; + struct cfi_pri_atmel atmel_pri; + uint32_t features = 0; + + /* Reverse byteswapping */ + extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport); + extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask); + extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr); + + memcpy(&atmel_pri, extp, sizeof(atmel_pri)); + memset((char *)extp + 5, 0, sizeof(*extp) - 5); + + printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features); + + if (atmel_pri.Features & 0x01) /* chip erase supported */ + features |= (1<<0); + if (atmel_pri.Features & 0x02) /* erase suspend supported */ + features |= (1<<1); + if (atmel_pri.Features & 0x04) /* program suspend supported */ + features |= (1<<2); + if (atmel_pri.Features & 0x08) /* simultaneous operations supported */ + features |= (1<<9); + if (atmel_pri.Features & 0x20) /* page mode read supported */ + features |= (1<<7); + if (atmel_pri.Features & 0x40) /* queued erase supported */ + features |= (1<<4); + if (atmel_pri.Features & 0x80) /* Protection bits supported */ + features |= (1<<6); + + extp->FeatureSupport = features; + + /* burst write mode not supported */ + cfi->cfiq->BufWriteTimeoutTyp = 0; + cfi->cfiq->BufWriteTimeoutMax = 0; +} + +static void fixup_at49bv640dx_lock(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + struct cfi_pri_intelext *cfip = cfi->cmdset_priv; + + cfip->FeatureSupport |= (1 << 5); + mtd->flags |= MTD_POWERUP_LOCK; +} + +#ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE +/* Some Intel Strata Flash prior to FPO revision C has bugs in this area */ +static void fixup_intel_strataflash(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + struct cfi_pri_intelext *extp = cfi->cmdset_priv; + + printk(KERN_WARNING "cfi_cmdset_0001: Suspend " + "erase on write disabled.\n"); + extp->SuspendCmdSupport &= ~1; +} +#endif + +#ifdef CMDSET0001_DISABLE_WRITE_SUSPEND +static void fixup_no_write_suspend(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + struct cfi_pri_intelext *cfip = cfi->cmdset_priv; + + if (cfip && (cfip->FeatureSupport&4)) { + cfip->FeatureSupport &= ~4; + printk(KERN_WARNING "cfi_cmdset_0001: write suspend disabled\n"); + } +} +#endif + +static void fixup_st_m28w320ct(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + + cfi->cfiq->BufWriteTimeoutTyp = 0; /* Not supported */ + cfi->cfiq->BufWriteTimeoutMax = 0; /* Not supported */ +} + +static void fixup_st_m28w320cb(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + + /* Note this is done after the region info is endian swapped */ + cfi->cfiq->EraseRegionInfo[1] = + (cfi->cfiq->EraseRegionInfo[1] & 0xffff0000) | 0x3e; +}; + +static int is_LH28F640BF(struct cfi_private *cfi) +{ + /* Sharp LH28F640BF Family */ + if (cfi->mfr == CFI_MFR_SHARP && ( + cfi->id == LH28F640BFHE_PTTL90 || cfi->id == LH28F640BFHE_PBTL90 || + cfi->id == LH28F640BFHE_PTTL70A || cfi->id == LH28F640BFHE_PBTL70A)) + return 1; + return 0; +} + +static void fixup_LH28F640BF(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + struct cfi_pri_intelext *extp = cfi->cmdset_priv; + + /* Reset the Partition Configuration Register on LH28F640BF + * to a single partition (PCR = 0x000): PCR is embedded into A0-A15. */ + if (is_LH28F640BF(cfi)) { + printk(KERN_INFO "Reset Partition Config. Register: 1 Partition of 4 planes\n"); + map_write(map, CMD(0x60), 0); + map_write(map, CMD(0x04), 0); + + /* We have set one single partition thus + * Simultaneous Operations are not allowed */ + printk(KERN_INFO "cfi_cmdset_0001: Simultaneous Operations disabled\n"); + extp->FeatureSupport &= ~512; + } +} + +static void fixup_use_point(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + if (!mtd->_point && map_is_linear(map)) { + mtd->_point = cfi_intelext_point; + mtd->_unpoint = cfi_intelext_unpoint; + } +} + +static void fixup_use_write_buffers(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + if (cfi->cfiq->BufWriteTimeoutTyp) { + printk(KERN_INFO "Using buffer write method\n" ); + mtd->_write = cfi_intelext_write_buffers; + mtd->_writev = cfi_intelext_writev; + } +} + +/* + * Some chips power-up with all sectors locked by default. + */ +static void fixup_unlock_powerup_lock(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + struct cfi_pri_intelext *cfip = cfi->cmdset_priv; + + if (cfip->FeatureSupport&32) { + printk(KERN_INFO "Using auto-unlock on power-up/resume\n" ); + mtd->flags |= MTD_POWERUP_LOCK; + } +} + +static struct cfi_fixup cfi_fixup_table[] = { + { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri }, + { CFI_MFR_ATMEL, AT49BV640D, fixup_at49bv640dx_lock }, + { CFI_MFR_ATMEL, AT49BV640DT, fixup_at49bv640dx_lock }, +#ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE + { CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash }, +#endif +#ifdef CMDSET0001_DISABLE_WRITE_SUSPEND + { CFI_MFR_ANY, CFI_ID_ANY, fixup_no_write_suspend }, +#endif +#if !FORCE_WORD_WRITE + { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers }, +#endif + { CFI_MFR_ST, 0x00ba, /* M28W320CT */ fixup_st_m28w320ct }, + { CFI_MFR_ST, 0x00bb, /* M28W320CB */ fixup_st_m28w320cb }, + { CFI_MFR_INTEL, CFI_ID_ANY, fixup_unlock_powerup_lock }, + { CFI_MFR_SHARP, CFI_ID_ANY, fixup_unlock_powerup_lock }, + { CFI_MFR_SHARP, CFI_ID_ANY, fixup_LH28F640BF }, + { 0, 0, NULL } +}; + +static struct cfi_fixup jedec_fixup_table[] = { + { CFI_MFR_INTEL, I82802AB, fixup_use_fwh_lock }, + { CFI_MFR_INTEL, I82802AC, fixup_use_fwh_lock }, + { CFI_MFR_ST, M50LPW080, fixup_use_fwh_lock }, + { CFI_MFR_ST, M50FLW080A, fixup_use_fwh_lock }, + { CFI_MFR_ST, M50FLW080B, fixup_use_fwh_lock }, + { 0, 0, NULL } +}; +static struct cfi_fixup fixup_table[] = { + /* The CFI vendor ids and the JEDEC vendor IDs appear + * to be common. It is like the devices id's are as + * well. This table is to pick all cases where + * we know that is the case. + */ + { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_point }, + { 0, 0, NULL } +}; + +static void cfi_fixup_major_minor(struct cfi_private *cfi, + struct cfi_pri_intelext *extp) +{ + if (cfi->mfr == CFI_MFR_INTEL && + cfi->id == PF38F4476 && extp->MinorVersion == '3') + extp->MinorVersion = '1'; +} + +static int cfi_is_micron_28F00AP30(struct cfi_private *cfi, struct flchip *chip) +{ + /* + * Micron(was Numonyx) 1Gbit bottom boot are buggy w.r.t + * Erase Supend for their small Erase Blocks(0x8000) + */ + if (cfi->mfr == CFI_MFR_INTEL && cfi->id == M28F00AP30) + return 1; + return 0; +} + +static inline struct cfi_pri_intelext * +read_pri_intelext(struct map_info *map, __u16 adr) +{ + struct cfi_private *cfi = map->fldrv_priv; + struct cfi_pri_intelext *extp; + unsigned int extra_size = 0; + unsigned int extp_size = sizeof(*extp); + + again: + extp = (struct cfi_pri_intelext *)cfi_read_pri(map, adr, extp_size, "Intel/Sharp"); + if (!extp) + return NULL; + + cfi_fixup_major_minor(cfi, extp); + + if (extp->MajorVersion != '1' || + (extp->MinorVersion < '0' || extp->MinorVersion > '5')) { + printk(KERN_ERR " Unknown Intel/Sharp Extended Query " + "version %c.%c.\n", extp->MajorVersion, + extp->MinorVersion); + kfree(extp); + return NULL; + } + + /* Do some byteswapping if necessary */ + extp->FeatureSupport = le32_to_cpu(extp->FeatureSupport); + extp->BlkStatusRegMask = le16_to_cpu(extp->BlkStatusRegMask); + extp->ProtRegAddr = le16_to_cpu(extp->ProtRegAddr); + + if (extp->MinorVersion >= '0') { + extra_size = 0; + + /* Protection Register info */ + if (extp->NumProtectionFields) { + struct cfi_intelext_otpinfo *otp = + (struct cfi_intelext_otpinfo *)&extp->extra[0]; + + extra_size += (extp->NumProtectionFields - 1) * + sizeof(struct cfi_intelext_otpinfo); + + if (extp_size >= sizeof(*extp) + extra_size) { + int i; + + /* Do some byteswapping if necessary */ + for (i = 0; i < extp->NumProtectionFields - 1; i++) { + otp->ProtRegAddr = le32_to_cpu(otp->ProtRegAddr); + otp->FactGroups = le16_to_cpu(otp->FactGroups); + otp->UserGroups = le16_to_cpu(otp->UserGroups); + otp++; + } + } + } + } + + if (extp->MinorVersion >= '1') { + /* Burst Read info */ + extra_size += 2; + if (extp_size < sizeof(*extp) + extra_size) + goto need_more; + extra_size += extp->extra[extra_size - 1]; + } + + if (extp->MinorVersion >= '3') { + int nb_parts, i; + + /* Number of hardware-partitions */ + extra_size += 1; + if (extp_size < sizeof(*extp) + extra_size) + goto need_more; + nb_parts = extp->extra[extra_size - 1]; + + /* skip the sizeof(partregion) field in CFI 1.4 */ + if (extp->MinorVersion >= '4') + extra_size += 2; + + for (i = 0; i < nb_parts; i++) { + struct cfi_intelext_regioninfo *rinfo; + rinfo = (struct cfi_intelext_regioninfo *)&extp->extra[extra_size]; + extra_size += sizeof(*rinfo); + if (extp_size < sizeof(*extp) + extra_size) + goto need_more; + rinfo->NumIdentPartitions=le16_to_cpu(rinfo->NumIdentPartitions); + extra_size += (rinfo->NumBlockTypes - 1) + * sizeof(struct cfi_intelext_blockinfo); + } + + if (extp->MinorVersion >= '4') + extra_size += sizeof(struct cfi_intelext_programming_regioninfo); + + if (extp_size < sizeof(*extp) + extra_size) { + need_more: + extp_size = sizeof(*extp) + extra_size; + kfree(extp); + if (extp_size > 4096) { + printk(KERN_ERR + "%s: cfi_pri_intelext is too fat\n", + __func__); + return NULL; + } + goto again; + } + } + + return extp; +} + +struct mtd_info *cfi_cmdset_0001(struct map_info *map, int primary) +{ + struct cfi_private *cfi = map->fldrv_priv; + struct mtd_info *mtd; + int i; + + mtd = kzalloc(sizeof(*mtd), GFP_KERNEL); + if (!mtd) + return NULL; + mtd->priv = map; + mtd->type = MTD_NORFLASH; + + /* Fill in the default mtd operations */ + mtd->_erase = cfi_intelext_erase_varsize; + mtd->_read = cfi_intelext_read; + mtd->_write = cfi_intelext_write_words; + mtd->_sync = cfi_intelext_sync; + mtd->_lock = cfi_intelext_lock; + mtd->_unlock = cfi_intelext_unlock; + mtd->_is_locked = cfi_intelext_is_locked; + mtd->_suspend = cfi_intelext_suspend; + mtd->_resume = cfi_intelext_resume; + mtd->flags = MTD_CAP_NORFLASH; + mtd->name = map->name; + mtd->writesize = 1; + mtd->writebufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize; + + mtd->reboot_notifier.notifier_call = cfi_intelext_reboot; + + if (cfi->cfi_mode == CFI_MODE_CFI) { + /* + * It's a real CFI chip, not one for which the probe + * routine faked a CFI structure. So we read the feature + * table from it. + */ + __u16 adr = primary?cfi->cfiq->P_ADR:cfi->cfiq->A_ADR; + struct cfi_pri_intelext *extp; + + extp = read_pri_intelext(map, adr); + if (!extp) { + kfree(mtd); + return NULL; + } + + /* Install our own private info structure */ + cfi->cmdset_priv = extp; + + cfi_fixup(mtd, cfi_fixup_table); + +#ifdef DEBUG_CFI_FEATURES + /* Tell the user about it in lots of lovely detail */ + cfi_tell_features(extp); +#endif + + if(extp->SuspendCmdSupport & 1) { + printk(KERN_NOTICE "cfi_cmdset_0001: Erase suspend on write enabled\n"); + } + } + else if (cfi->cfi_mode == CFI_MODE_JEDEC) { + /* Apply jedec specific fixups */ + cfi_fixup(mtd, jedec_fixup_table); + } + /* Apply generic fixups */ + cfi_fixup(mtd, fixup_table); + + for (i=0; i< cfi->numchips; i++) { + if (cfi->cfiq->WordWriteTimeoutTyp) + cfi->chips[i].word_write_time = + 1<<cfi->cfiq->WordWriteTimeoutTyp; + else + cfi->chips[i].word_write_time = 50000; + + if (cfi->cfiq->BufWriteTimeoutTyp) + cfi->chips[i].buffer_write_time = + 1<<cfi->cfiq->BufWriteTimeoutTyp; + /* No default; if it isn't specified, we won't use it */ + + if (cfi->cfiq->BlockEraseTimeoutTyp) + cfi->chips[i].erase_time = + 1000<<cfi->cfiq->BlockEraseTimeoutTyp; + else + cfi->chips[i].erase_time = 2000000; + + if (cfi->cfiq->WordWriteTimeoutTyp && + cfi->cfiq->WordWriteTimeoutMax) + cfi->chips[i].word_write_time_max = + 1<<(cfi->cfiq->WordWriteTimeoutTyp + + cfi->cfiq->WordWriteTimeoutMax); + else + cfi->chips[i].word_write_time_max = 50000 * 8; + + if (cfi->cfiq->BufWriteTimeoutTyp && + cfi->cfiq->BufWriteTimeoutMax) + cfi->chips[i].buffer_write_time_max = + 1<<(cfi->cfiq->BufWriteTimeoutTyp + + cfi->cfiq->BufWriteTimeoutMax); + + if (cfi->cfiq->BlockEraseTimeoutTyp && + cfi->cfiq->BlockEraseTimeoutMax) + cfi->chips[i].erase_time_max = + 1000<<(cfi->cfiq->BlockEraseTimeoutTyp + + cfi->cfiq->BlockEraseTimeoutMax); + else + cfi->chips[i].erase_time_max = 2000000 * 8; + + cfi->chips[i].ref_point_counter = 0; + init_waitqueue_head(&(cfi->chips[i].wq)); + } + + map->fldrv = &cfi_intelext_chipdrv; + + return cfi_intelext_setup(mtd); +} +struct mtd_info *cfi_cmdset_0003(struct map_info *map, int primary) __attribute__((alias("cfi_cmdset_0001"))); +struct mtd_info *cfi_cmdset_0200(struct map_info *map, int primary) __attribute__((alias("cfi_cmdset_0001"))); +EXPORT_SYMBOL_GPL(cfi_cmdset_0001); +EXPORT_SYMBOL_GPL(cfi_cmdset_0003); +EXPORT_SYMBOL_GPL(cfi_cmdset_0200); + +static struct mtd_info *cfi_intelext_setup(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long offset = 0; + int i,j; + unsigned long devsize = (1<<cfi->cfiq->DevSize) * cfi->interleave; + + //printk(KERN_DEBUG "number of CFI chips: %d\n", cfi->numchips); + + mtd->size = devsize * cfi->numchips; + + mtd->numeraseregions = cfi->cfiq->NumEraseRegions * cfi->numchips; + mtd->eraseregions = kcalloc(mtd->numeraseregions, + sizeof(struct mtd_erase_region_info), + GFP_KERNEL); + if (!mtd->eraseregions) + goto setup_err; + + for (i=0; i<cfi->cfiq->NumEraseRegions; i++) { + unsigned long ernum, ersize; + ersize = ((cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff) * cfi->interleave; + ernum = (cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1; + + if (mtd->erasesize < ersize) { + mtd->erasesize = ersize; + } + for (j=0; j<cfi->numchips; j++) { + mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].offset = (j*devsize)+offset; + mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].erasesize = ersize; + mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].numblocks = ernum; + mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].lockmap = kmalloc(ernum / 8 + 1, GFP_KERNEL); + if (!mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].lockmap) + goto setup_err; + } + offset += (ersize * ernum); + } + + if (offset != devsize) { + /* Argh */ + printk(KERN_WARNING "Sum of regions (%lx) != total size of set of interleaved chips (%lx)\n", offset, devsize); + goto setup_err; + } + + for (i=0; i<mtd->numeraseregions;i++){ + printk(KERN_DEBUG "erase region %d: offset=0x%llx,size=0x%x,blocks=%d\n", + i,(unsigned long long)mtd->eraseregions[i].offset, + mtd->eraseregions[i].erasesize, + mtd->eraseregions[i].numblocks); + } + +#ifdef CONFIG_MTD_OTP + mtd->_read_fact_prot_reg = cfi_intelext_read_fact_prot_reg; + mtd->_read_user_prot_reg = cfi_intelext_read_user_prot_reg; + mtd->_write_user_prot_reg = cfi_intelext_write_user_prot_reg; + mtd->_lock_user_prot_reg = cfi_intelext_lock_user_prot_reg; + mtd->_get_fact_prot_info = cfi_intelext_get_fact_prot_info; + mtd->_get_user_prot_info = cfi_intelext_get_user_prot_info; +#endif + + /* This function has the potential to distort the reality + a bit and therefore should be called last. */ + if (cfi_intelext_partition_fixup(mtd, &cfi) != 0) + goto setup_err; + + __module_get(THIS_MODULE); + register_reboot_notifier(&mtd->reboot_notifier); + return mtd; + + setup_err: + if (mtd->eraseregions) + for (i=0; i<cfi->cfiq->NumEraseRegions; i++) + for (j=0; j<cfi->numchips; j++) + kfree(mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].lockmap); + kfree(mtd->eraseregions); + kfree(mtd); + kfree(cfi->cmdset_priv); + return NULL; +} + +static int cfi_intelext_partition_fixup(struct mtd_info *mtd, + struct cfi_private **pcfi) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = *pcfi; + struct cfi_pri_intelext *extp = cfi->cmdset_priv; + + /* + * Probing of multi-partition flash chips. + * + * To support multiple partitions when available, we simply arrange + * for each of them to have their own flchip structure even if they + * are on the same physical chip. This means completely recreating + * a new cfi_private structure right here which is a blatent code + * layering violation, but this is still the least intrusive + * arrangement at this point. This can be rearranged in the future + * if someone feels motivated enough. --nico + */ + if (extp && extp->MajorVersion == '1' && extp->MinorVersion >= '3' + && extp->FeatureSupport & (1 << 9)) { + int offs = 0; + struct cfi_private *newcfi; + struct flchip *chip; + struct flchip_shared *shared; + int numregions, numparts, partshift, numvirtchips, i, j; + + /* Protection Register info */ + if (extp->NumProtectionFields) + offs = (extp->NumProtectionFields - 1) * + sizeof(struct cfi_intelext_otpinfo); + + /* Burst Read info */ + offs += extp->extra[offs+1]+2; + + /* Number of partition regions */ + numregions = extp->extra[offs]; + offs += 1; + + /* skip the sizeof(partregion) field in CFI 1.4 */ + if (extp->MinorVersion >= '4') + offs += 2; + + /* Number of hardware partitions */ + numparts = 0; + for (i = 0; i < numregions; i++) { + struct cfi_intelext_regioninfo *rinfo; + rinfo = (struct cfi_intelext_regioninfo *)&extp->extra[offs]; + numparts += rinfo->NumIdentPartitions; + offs += sizeof(*rinfo) + + (rinfo->NumBlockTypes - 1) * + sizeof(struct cfi_intelext_blockinfo); + } + + if (!numparts) + numparts = 1; + + /* Programming Region info */ + if (extp->MinorVersion >= '4') { + struct cfi_intelext_programming_regioninfo *prinfo; + prinfo = (struct cfi_intelext_programming_regioninfo *)&extp->extra[offs]; + mtd->writesize = cfi->interleave << prinfo->ProgRegShift; + mtd->flags &= ~MTD_BIT_WRITEABLE; + printk(KERN_DEBUG "%s: program region size/ctrl_valid/ctrl_inval = %d/%d/%d\n", + map->name, mtd->writesize, + cfi->interleave * prinfo->ControlValid, + cfi->interleave * prinfo->ControlInvalid); + } + + /* + * All functions below currently rely on all chips having + * the same geometry so we'll just assume that all hardware + * partitions are of the same size too. + */ + partshift = cfi->chipshift - __ffs(numparts); + + if ((1 << partshift) < mtd->erasesize) { + printk( KERN_ERR + "%s: bad number of hw partitions (%d)\n", + __func__, numparts); + return -EINVAL; + } + + numvirtchips = cfi->numchips * numparts; + newcfi = kmalloc(struct_size(newcfi, chips, numvirtchips), + GFP_KERNEL); + if (!newcfi) + return -ENOMEM; + shared = kmalloc_array(cfi->numchips, + sizeof(struct flchip_shared), + GFP_KERNEL); + if (!shared) { + kfree(newcfi); + return -ENOMEM; + } + memcpy(newcfi, cfi, sizeof(struct cfi_private)); + newcfi->numchips = numvirtchips; + newcfi->chipshift = partshift; + + chip = &newcfi->chips[0]; + for (i = 0; i < cfi->numchips; i++) { + shared[i].writing = shared[i].erasing = NULL; + mutex_init(&shared[i].lock); + for (j = 0; j < numparts; j++) { + *chip = cfi->chips[i]; + chip->start += j << partshift; + chip->priv = &shared[i]; + /* those should be reset too since + they create memory references. */ + init_waitqueue_head(&chip->wq); + mutex_init(&chip->mutex); + chip++; + } + } + + printk(KERN_DEBUG "%s: %d set(s) of %d interleaved chips " + "--> %d partitions of %d KiB\n", + map->name, cfi->numchips, cfi->interleave, + newcfi->numchips, 1<<(newcfi->chipshift-10)); + + map->fldrv_priv = newcfi; + *pcfi = newcfi; + kfree(cfi); + } + + return 0; +} + +/* + * *********** CHIP ACCESS FUNCTIONS *********** + */ +static int chip_ready (struct map_info *map, struct flchip *chip, unsigned long adr, int mode) +{ + DECLARE_WAITQUEUE(wait, current); + struct cfi_private *cfi = map->fldrv_priv; + map_word status, status_OK = CMD(0x80), status_PWS = CMD(0x01); + struct cfi_pri_intelext *cfip = cfi->cmdset_priv; + unsigned long timeo = jiffies + HZ; + + /* Prevent setting state FL_SYNCING for chip in suspended state. */ + if (mode == FL_SYNCING && chip->oldstate != FL_READY) + goto sleep; + + switch (chip->state) { + + case FL_STATUS: + for (;;) { + status = map_read(map, adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + /* At this point we're fine with write operations + in other partitions as they don't conflict. */ + if (chip->priv && map_word_andequal(map, status, status_PWS, status_PWS)) + break; + + mutex_unlock(&chip->mutex); + cfi_udelay(1); + mutex_lock(&chip->mutex); + /* Someone else might have been playing with it. */ + return -EAGAIN; + } + fallthrough; + case FL_READY: + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + return 0; + + case FL_ERASING: + if (!cfip || + !(cfip->FeatureSupport & 2) || + !(mode == FL_READY || mode == FL_POINT || + (mode == FL_WRITING && (cfip->SuspendCmdSupport & 1)))) + goto sleep; + + /* Do not allow suspend iff read/write to EB address */ + if ((adr & chip->in_progress_block_mask) == + chip->in_progress_block_addr) + goto sleep; + + /* do not suspend small EBs, buggy Micron Chips */ + if (cfi_is_micron_28F00AP30(cfi, chip) && + (chip->in_progress_block_mask == ~(0x8000-1))) + goto sleep; + + /* Erase suspend */ + map_write(map, CMD(0xB0), chip->in_progress_block_addr); + + /* If the flash has finished erasing, then 'erase suspend' + * appears to make some (28F320) flash devices switch to + * 'read' mode. Make sure that we switch to 'read status' + * mode so we get the right data. --rmk + */ + map_write(map, CMD(0x70), chip->in_progress_block_addr); + chip->oldstate = FL_ERASING; + chip->state = FL_ERASE_SUSPENDING; + chip->erase_suspended = 1; + for (;;) { + status = map_read(map, chip->in_progress_block_addr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + if (time_after(jiffies, timeo)) { + /* Urgh. Resume and pretend we weren't here. + * Make sure we're in 'read status' mode if it had finished */ + put_chip(map, chip, adr); + printk(KERN_ERR "%s: Chip not ready after erase " + "suspended: status = 0x%lx\n", map->name, status.x[0]); + return -EIO; + } + + mutex_unlock(&chip->mutex); + cfi_udelay(1); + mutex_lock(&chip->mutex); + /* Nobody will touch it while it's in state FL_ERASE_SUSPENDING. + So we can just loop here. */ + } + chip->state = FL_STATUS; + return 0; + + case FL_XIP_WHILE_ERASING: + if (mode != FL_READY && mode != FL_POINT && + (mode != FL_WRITING || !cfip || !(cfip->SuspendCmdSupport&1))) + goto sleep; + chip->oldstate = chip->state; + chip->state = FL_READY; + return 0; + + case FL_SHUTDOWN: + /* The machine is rebooting now,so no one can get chip anymore */ + return -EIO; + case FL_POINT: + /* Only if there's no operation suspended... */ + if (mode == FL_READY && chip->oldstate == FL_READY) + return 0; + fallthrough; + default: + sleep: + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + mutex_unlock(&chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + mutex_lock(&chip->mutex); + return -EAGAIN; + } +} + +static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr, int mode) +{ + int ret; + DECLARE_WAITQUEUE(wait, current); + + retry: + if (chip->priv && + (mode == FL_WRITING || mode == FL_ERASING || mode == FL_OTP_WRITE + || mode == FL_SHUTDOWN) && chip->state != FL_SYNCING) { + /* + * OK. We have possibility for contention on the write/erase + * operations which are global to the real chip and not per + * partition. So let's fight it over in the partition which + * currently has authority on the operation. + * + * The rules are as follows: + * + * - any write operation must own shared->writing. + * + * - any erase operation must own _both_ shared->writing and + * shared->erasing. + * + * - contention arbitration is handled in the owner's context. + * + * The 'shared' struct can be read and/or written only when + * its lock is taken. + */ + struct flchip_shared *shared = chip->priv; + struct flchip *contender; + mutex_lock(&shared->lock); + contender = shared->writing; + if (contender && contender != chip) { + /* + * The engine to perform desired operation on this + * partition is already in use by someone else. + * Let's fight over it in the context of the chip + * currently using it. If it is possible to suspend, + * that other partition will do just that, otherwise + * it'll happily send us to sleep. In any case, when + * get_chip returns success we're clear to go ahead. + */ + ret = mutex_trylock(&contender->mutex); + mutex_unlock(&shared->lock); + if (!ret) + goto retry; + mutex_unlock(&chip->mutex); + ret = chip_ready(map, contender, contender->start, mode); + mutex_lock(&chip->mutex); + + if (ret == -EAGAIN) { + mutex_unlock(&contender->mutex); + goto retry; + } + if (ret) { + mutex_unlock(&contender->mutex); + return ret; + } + mutex_lock(&shared->lock); + + /* We should not own chip if it is already + * in FL_SYNCING state. Put contender and retry. */ + if (chip->state == FL_SYNCING) { + put_chip(map, contender, contender->start); + mutex_unlock(&contender->mutex); + goto retry; + } + mutex_unlock(&contender->mutex); + } + + /* Check if we already have suspended erase + * on this chip. Sleep. */ + if (mode == FL_ERASING && shared->erasing + && shared->erasing->oldstate == FL_ERASING) { + mutex_unlock(&shared->lock); + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + mutex_unlock(&chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + mutex_lock(&chip->mutex); + goto retry; + } + + /* We now own it */ + shared->writing = chip; + if (mode == FL_ERASING) + shared->erasing = chip; + mutex_unlock(&shared->lock); + } + ret = chip_ready(map, chip, adr, mode); + if (ret == -EAGAIN) + goto retry; + + return ret; +} + +static void put_chip(struct map_info *map, struct flchip *chip, unsigned long adr) +{ + struct cfi_private *cfi = map->fldrv_priv; + + if (chip->priv) { + struct flchip_shared *shared = chip->priv; + mutex_lock(&shared->lock); + if (shared->writing == chip && chip->oldstate == FL_READY) { + /* We own the ability to write, but we're done */ + shared->writing = shared->erasing; + if (shared->writing && shared->writing != chip) { + /* give back ownership to who we loaned it from */ + struct flchip *loaner = shared->writing; + mutex_lock(&loaner->mutex); + mutex_unlock(&shared->lock); + mutex_unlock(&chip->mutex); + put_chip(map, loaner, loaner->start); + mutex_lock(&chip->mutex); + mutex_unlock(&loaner->mutex); + wake_up(&chip->wq); + return; + } + shared->erasing = NULL; + shared->writing = NULL; + } else if (shared->erasing == chip && shared->writing != chip) { + /* + * We own the ability to erase without the ability + * to write, which means the erase was suspended + * and some other partition is currently writing. + * Don't let the switch below mess things up since + * we don't have ownership to resume anything. + */ + mutex_unlock(&shared->lock); + wake_up(&chip->wq); + return; + } + mutex_unlock(&shared->lock); + } + + switch(chip->oldstate) { + case FL_ERASING: + /* What if one interleaved chip has finished and the + other hasn't? The old code would leave the finished + one in READY mode. That's bad, and caused -EROFS + errors to be returned from do_erase_oneblock because + that's the only bit it checked for at the time. + As the state machine appears to explicitly allow + sending the 0x70 (Read Status) command to an erasing + chip and expecting it to be ignored, that's what we + do. */ + map_write(map, CMD(0xd0), chip->in_progress_block_addr); + map_write(map, CMD(0x70), chip->in_progress_block_addr); + chip->oldstate = FL_READY; + chip->state = FL_ERASING; + break; + + case FL_XIP_WHILE_ERASING: + chip->state = chip->oldstate; + chip->oldstate = FL_READY; + break; + + case FL_READY: + case FL_STATUS: + case FL_JEDEC_QUERY: + break; + default: + printk(KERN_ERR "%s: put_chip() called with oldstate %d!!\n", map->name, chip->oldstate); + } + wake_up(&chip->wq); +} + +#ifdef CONFIG_MTD_XIP + +/* + * No interrupt what so ever can be serviced while the flash isn't in array + * mode. This is ensured by the xip_disable() and xip_enable() functions + * enclosing any code path where the flash is known not to be in array mode. + * And within a XIP disabled code path, only functions marked with __xipram + * may be called and nothing else (it's a good thing to inspect generated + * assembly to make sure inline functions were actually inlined and that gcc + * didn't emit calls to its own support functions). Also configuring MTD CFI + * support to a single buswidth and a single interleave is also recommended. + */ + +static void xip_disable(struct map_info *map, struct flchip *chip, + unsigned long adr) +{ + /* TODO: chips with no XIP use should ignore and return */ + (void) map_read(map, adr); /* ensure mmu mapping is up to date */ + local_irq_disable(); +} + +static void __xipram xip_enable(struct map_info *map, struct flchip *chip, + unsigned long adr) +{ + struct cfi_private *cfi = map->fldrv_priv; + if (chip->state != FL_POINT && chip->state != FL_READY) { + map_write(map, CMD(0xff), adr); + chip->state = FL_READY; + } + (void) map_read(map, adr); + xip_iprefetch(); + local_irq_enable(); +} + +/* + * When a delay is required for the flash operation to complete, the + * xip_wait_for_operation() function is polling for both the given timeout + * and pending (but still masked) hardware interrupts. Whenever there is an + * interrupt pending then the flash erase or write operation is suspended, + * array mode restored and interrupts unmasked. Task scheduling might also + * happen at that point. The CPU eventually returns from the interrupt or + * the call to schedule() and the suspended flash operation is resumed for + * the remaining of the delay period. + * + * Warning: this function _will_ fool interrupt latency tracing tools. + */ + +static int __xipram xip_wait_for_operation( + struct map_info *map, struct flchip *chip, + unsigned long adr, unsigned int chip_op_time_max) +{ + struct cfi_private *cfi = map->fldrv_priv; + struct cfi_pri_intelext *cfip = cfi->cmdset_priv; + map_word status, OK = CMD(0x80); + unsigned long usec, suspended, start, done; + flstate_t oldstate, newstate; + + start = xip_currtime(); + usec = chip_op_time_max; + if (usec == 0) + usec = 500000; + done = 0; + + do { + cpu_relax(); + if (xip_irqpending() && cfip && + ((chip->state == FL_ERASING && (cfip->FeatureSupport&2)) || + (chip->state == FL_WRITING && (cfip->FeatureSupport&4))) && + (cfi_interleave_is_1(cfi) || chip->oldstate == FL_READY)) { + /* + * Let's suspend the erase or write operation when + * supported. Note that we currently don't try to + * suspend interleaved chips if there is already + * another operation suspended (imagine what happens + * when one chip was already done with the current + * operation while another chip suspended it, then + * we resume the whole thing at once). Yes, it + * can happen! + */ + usec -= done; + map_write(map, CMD(0xb0), adr); + map_write(map, CMD(0x70), adr); + suspended = xip_currtime(); + do { + if (xip_elapsed_since(suspended) > 100000) { + /* + * The chip doesn't want to suspend + * after waiting for 100 msecs. + * This is a critical error but there + * is not much we can do here. + */ + return -EIO; + } + status = map_read(map, adr); + } while (!map_word_andequal(map, status, OK, OK)); + + /* Suspend succeeded */ + oldstate = chip->state; + if (oldstate == FL_ERASING) { + if (!map_word_bitsset(map, status, CMD(0x40))) + break; + newstate = FL_XIP_WHILE_ERASING; + chip->erase_suspended = 1; + } else { + if (!map_word_bitsset(map, status, CMD(0x04))) + break; + newstate = FL_XIP_WHILE_WRITING; + chip->write_suspended = 1; + } + chip->state = newstate; + map_write(map, CMD(0xff), adr); + (void) map_read(map, adr); + xip_iprefetch(); + local_irq_enable(); + mutex_unlock(&chip->mutex); + xip_iprefetch(); + cond_resched(); + + /* + * We're back. However someone else might have + * decided to go write to the chip if we are in + * a suspended erase state. If so let's wait + * until it's done. + */ + mutex_lock(&chip->mutex); + while (chip->state != newstate) { + DECLARE_WAITQUEUE(wait, current); + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + mutex_unlock(&chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + mutex_lock(&chip->mutex); + } + /* Disallow XIP again */ + local_irq_disable(); + + /* Resume the write or erase operation */ + map_write(map, CMD(0xd0), adr); + map_write(map, CMD(0x70), adr); + chip->state = oldstate; + start = xip_currtime(); + } else if (usec >= 1000000/HZ) { + /* + * Try to save on CPU power when waiting delay + * is at least a system timer tick period. + * No need to be extremely accurate here. + */ + xip_cpu_idle(); + } + status = map_read(map, adr); + done = xip_elapsed_since(start); + } while (!map_word_andequal(map, status, OK, OK) + && done < usec); + + return (done >= usec) ? -ETIME : 0; +} + +/* + * The INVALIDATE_CACHED_RANGE() macro is normally used in parallel while + * the flash is actively programming or erasing since we have to poll for + * the operation to complete anyway. We can't do that in a generic way with + * a XIP setup so do it before the actual flash operation in this case + * and stub it out from INVAL_CACHE_AND_WAIT. + */ +#define XIP_INVAL_CACHED_RANGE(map, from, size) \ + INVALIDATE_CACHED_RANGE(map, from, size) + +#define INVAL_CACHE_AND_WAIT(map, chip, cmd_adr, inval_adr, inval_len, usec, usec_max) \ + xip_wait_for_operation(map, chip, cmd_adr, usec_max) + +#else + +#define xip_disable(map, chip, adr) +#define xip_enable(map, chip, adr) +#define XIP_INVAL_CACHED_RANGE(x...) +#define INVAL_CACHE_AND_WAIT inval_cache_and_wait_for_operation + +static int inval_cache_and_wait_for_operation( + struct map_info *map, struct flchip *chip, + unsigned long cmd_adr, unsigned long inval_adr, int inval_len, + unsigned int chip_op_time, unsigned int chip_op_time_max) +{ + struct cfi_private *cfi = map->fldrv_priv; + map_word status, status_OK = CMD(0x80); + int chip_state = chip->state; + unsigned int timeo, sleep_time, reset_timeo; + + mutex_unlock(&chip->mutex); + if (inval_len) + INVALIDATE_CACHED_RANGE(map, inval_adr, inval_len); + mutex_lock(&chip->mutex); + + timeo = chip_op_time_max; + if (!timeo) + timeo = 500000; + reset_timeo = timeo; + sleep_time = chip_op_time / 2; + + for (;;) { + if (chip->state != chip_state) { + /* Someone's suspended the operation: sleep */ + DECLARE_WAITQUEUE(wait, current); + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + mutex_unlock(&chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + mutex_lock(&chip->mutex); + continue; + } + + status = map_read(map, cmd_adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + if (chip->erase_suspended && chip_state == FL_ERASING) { + /* Erase suspend occurred while sleep: reset timeout */ + timeo = reset_timeo; + chip->erase_suspended = 0; + } + if (chip->write_suspended && chip_state == FL_WRITING) { + /* Write suspend occurred while sleep: reset timeout */ + timeo = reset_timeo; + chip->write_suspended = 0; + } + if (!timeo) { + map_write(map, CMD(0x70), cmd_adr); + chip->state = FL_STATUS; + return -ETIME; + } + + /* OK Still waiting. Drop the lock, wait a while and retry. */ + mutex_unlock(&chip->mutex); + if (sleep_time >= 1000000/HZ) { + /* + * Half of the normal delay still remaining + * can be performed with a sleeping delay instead + * of busy waiting. + */ + msleep(sleep_time/1000); + timeo -= sleep_time; + sleep_time = 1000000/HZ; + } else { + udelay(1); + cond_resched(); + timeo--; + } + mutex_lock(&chip->mutex); + } + + /* Done and happy. */ + chip->state = FL_STATUS; + return 0; +} + +#endif + +#define WAIT_TIMEOUT(map, chip, adr, udelay, udelay_max) \ + INVAL_CACHE_AND_WAIT(map, chip, adr, 0, 0, udelay, udelay_max); + + +static int do_point_onechip (struct map_info *map, struct flchip *chip, loff_t adr, size_t len) +{ + unsigned long cmd_addr; + struct cfi_private *cfi = map->fldrv_priv; + int ret; + + adr += chip->start; + + /* Ensure cmd read/writes are aligned. */ + cmd_addr = adr & ~(map_bankwidth(map)-1); + + mutex_lock(&chip->mutex); + + ret = get_chip(map, chip, cmd_addr, FL_POINT); + + if (!ret) { + if (chip->state != FL_POINT && chip->state != FL_READY) + map_write(map, CMD(0xff), cmd_addr); + + chip->state = FL_POINT; + chip->ref_point_counter++; + } + mutex_unlock(&chip->mutex); + + return ret; +} + +static int cfi_intelext_point(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, resource_size_t *phys) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long ofs, last_end = 0; + int chipnum; + int ret; + + if (!map->virt) + return -EINVAL; + + /* Now lock the chip(s) to POINT state */ + + /* ofs: offset within the first chip that the first read should start */ + chipnum = (from >> cfi->chipshift); + ofs = from - (chipnum << cfi->chipshift); + + *virt = map->virt + cfi->chips[chipnum].start + ofs; + if (phys) + *phys = map->phys + cfi->chips[chipnum].start + ofs; + + while (len) { + unsigned long thislen; + + if (chipnum >= cfi->numchips) + break; + + /* We cannot point across chips that are virtually disjoint */ + if (!last_end) + last_end = cfi->chips[chipnum].start; + else if (cfi->chips[chipnum].start != last_end) + break; + + if ((len + ofs -1) >> cfi->chipshift) + thislen = (1<<cfi->chipshift) - ofs; + else + thislen = len; + + ret = do_point_onechip(map, &cfi->chips[chipnum], ofs, thislen); + if (ret) + break; + + *retlen += thislen; + len -= thislen; + + ofs = 0; + last_end += 1 << cfi->chipshift; + chipnum++; + } + return 0; +} + +static int cfi_intelext_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long ofs; + int chipnum, err = 0; + + /* Now unlock the chip(s) POINT state */ + + /* ofs: offset within the first chip that the first read should start */ + chipnum = (from >> cfi->chipshift); + ofs = from - (chipnum << cfi->chipshift); + + while (len && !err) { + unsigned long thislen; + struct flchip *chip; + + chip = &cfi->chips[chipnum]; + if (chipnum >= cfi->numchips) + break; + + if ((len + ofs -1) >> cfi->chipshift) + thislen = (1<<cfi->chipshift) - ofs; + else + thislen = len; + + mutex_lock(&chip->mutex); + if (chip->state == FL_POINT) { + chip->ref_point_counter--; + if(chip->ref_point_counter == 0) + chip->state = FL_READY; + } else { + printk(KERN_ERR "%s: Error: unpoint called on non pointed region\n", map->name); + err = -EINVAL; + } + + put_chip(map, chip, chip->start); + mutex_unlock(&chip->mutex); + + len -= thislen; + ofs = 0; + chipnum++; + } + + return err; +} + +static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf) +{ + unsigned long cmd_addr; + struct cfi_private *cfi = map->fldrv_priv; + int ret; + + adr += chip->start; + + /* Ensure cmd read/writes are aligned. */ + cmd_addr = adr & ~(map_bankwidth(map)-1); + + mutex_lock(&chip->mutex); + ret = get_chip(map, chip, cmd_addr, FL_READY); + if (ret) { + mutex_unlock(&chip->mutex); + return ret; + } + + if (chip->state != FL_POINT && chip->state != FL_READY) { + map_write(map, CMD(0xff), cmd_addr); + + chip->state = FL_READY; + } + + map_copy_from(map, buf, adr, len); + + put_chip(map, chip, cmd_addr); + + mutex_unlock(&chip->mutex); + return 0; +} + +static int cfi_intelext_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long ofs; + int chipnum; + int ret = 0; + + /* ofs: offset within the first chip that the first read should start */ + chipnum = (from >> cfi->chipshift); + ofs = from - (chipnum << cfi->chipshift); + + while (len) { + unsigned long thislen; + + if (chipnum >= cfi->numchips) + break; + + if ((len + ofs -1) >> cfi->chipshift) + thislen = (1<<cfi->chipshift) - ofs; + else + thislen = len; + + ret = do_read_onechip(map, &cfi->chips[chipnum], ofs, thislen, buf); + if (ret) + break; + + *retlen += thislen; + len -= thislen; + buf += thislen; + + ofs = 0; + chipnum++; + } + return ret; +} + +static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, + unsigned long adr, map_word datum, int mode) +{ + struct cfi_private *cfi = map->fldrv_priv; + map_word status, write_cmd; + int ret; + + adr += chip->start; + + switch (mode) { + case FL_WRITING: + write_cmd = (cfi->cfiq->P_ID != P_ID_INTEL_PERFORMANCE) ? CMD(0x40) : CMD(0x41); + break; + case FL_OTP_WRITE: + write_cmd = CMD(0xc0); + break; + default: + return -EINVAL; + } + + mutex_lock(&chip->mutex); + ret = get_chip(map, chip, adr, mode); + if (ret) { + mutex_unlock(&chip->mutex); + return ret; + } + + XIP_INVAL_CACHED_RANGE(map, adr, map_bankwidth(map)); + ENABLE_VPP(map); + xip_disable(map, chip, adr); + map_write(map, write_cmd, adr); + map_write(map, datum, adr); + chip->state = mode; + + ret = INVAL_CACHE_AND_WAIT(map, chip, adr, + adr, map_bankwidth(map), + chip->word_write_time, + chip->word_write_time_max); + if (ret) { + xip_enable(map, chip, adr); + printk(KERN_ERR "%s: word write error (status timeout)\n", map->name); + goto out; + } + + /* check for errors */ + status = map_read(map, adr); + if (map_word_bitsset(map, status, CMD(0x1a))) { + unsigned long chipstatus = MERGESTATUS(status); + + /* reset status */ + map_write(map, CMD(0x50), adr); + map_write(map, CMD(0x70), adr); + xip_enable(map, chip, adr); + + if (chipstatus & 0x02) { + ret = -EROFS; + } else if (chipstatus & 0x08) { + printk(KERN_ERR "%s: word write error (bad VPP)\n", map->name); + ret = -EIO; + } else { + printk(KERN_ERR "%s: word write error (status 0x%lx)\n", map->name, chipstatus); + ret = -EINVAL; + } + + goto out; + } + + xip_enable(map, chip, adr); + out: DISABLE_VPP(map); + put_chip(map, chip, adr); + mutex_unlock(&chip->mutex); + return ret; +} + + +static int cfi_intelext_write_words (struct mtd_info *mtd, loff_t to , size_t len, size_t *retlen, const u_char *buf) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int ret; + int chipnum; + unsigned long ofs; + + chipnum = to >> cfi->chipshift; + ofs = to - (chipnum << cfi->chipshift); + + /* If it's not bus-aligned, do the first byte write */ + if (ofs & (map_bankwidth(map)-1)) { + unsigned long bus_ofs = ofs & ~(map_bankwidth(map)-1); + int gap = ofs - bus_ofs; + int n; + map_word datum; + + n = min_t(int, len, map_bankwidth(map)-gap); + datum = map_word_ff(map); + datum = map_word_load_partial(map, datum, buf, gap, n); + + ret = do_write_oneword(map, &cfi->chips[chipnum], + bus_ofs, datum, FL_WRITING); + if (ret) + return ret; + + len -= n; + ofs += n; + buf += n; + (*retlen) += n; + + if (ofs >> cfi->chipshift) { + chipnum ++; + ofs = 0; + if (chipnum == cfi->numchips) + return 0; + } + } + + while(len >= map_bankwidth(map)) { + map_word datum = map_word_load(map, buf); + + ret = do_write_oneword(map, &cfi->chips[chipnum], + ofs, datum, FL_WRITING); + if (ret) + return ret; + + ofs += map_bankwidth(map); + buf += map_bankwidth(map); + (*retlen) += map_bankwidth(map); + len -= map_bankwidth(map); + + if (ofs >> cfi->chipshift) { + chipnum ++; + ofs = 0; + if (chipnum == cfi->numchips) + return 0; + } + } + + if (len & (map_bankwidth(map)-1)) { + map_word datum; + + datum = map_word_ff(map); + datum = map_word_load_partial(map, datum, buf, 0, len); + + ret = do_write_oneword(map, &cfi->chips[chipnum], + ofs, datum, FL_WRITING); + if (ret) + return ret; + + (*retlen) += len; + } + + return 0; +} + + +static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, + unsigned long adr, const struct kvec **pvec, + unsigned long *pvec_seek, int len) +{ + struct cfi_private *cfi = map->fldrv_priv; + map_word status, write_cmd, datum; + unsigned long cmd_adr; + int ret, wbufsize, word_gap, words; + const struct kvec *vec; + unsigned long vec_seek; + unsigned long initial_adr; + int initial_len = len; + + wbufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize; + adr += chip->start; + initial_adr = adr; + cmd_adr = adr & ~(wbufsize-1); + + /* Sharp LH28F640BF chips need the first address for the + * Page Buffer Program command. See Table 5 of + * LH28F320BF, LH28F640BF, LH28F128BF Series (Appendix FUM00701) */ + if (is_LH28F640BF(cfi)) + cmd_adr = adr; + + /* Let's determine this according to the interleave only once */ + write_cmd = (cfi->cfiq->P_ID != P_ID_INTEL_PERFORMANCE) ? CMD(0xe8) : CMD(0xe9); + + mutex_lock(&chip->mutex); + ret = get_chip(map, chip, cmd_adr, FL_WRITING); + if (ret) { + mutex_unlock(&chip->mutex); + return ret; + } + + XIP_INVAL_CACHED_RANGE(map, initial_adr, initial_len); + ENABLE_VPP(map); + xip_disable(map, chip, cmd_adr); + + /* §4.8 of the 28FxxxJ3A datasheet says "Any time SR.4 and/or SR.5 is set + [...], the device will not accept any more Write to Buffer commands". + So we must check here and reset those bits if they're set. Otherwise + we're just pissing in the wind */ + if (chip->state != FL_STATUS) { + map_write(map, CMD(0x70), cmd_adr); + chip->state = FL_STATUS; + } + status = map_read(map, cmd_adr); + if (map_word_bitsset(map, status, CMD(0x30))) { + xip_enable(map, chip, cmd_adr); + printk(KERN_WARNING "SR.4 or SR.5 bits set in buffer write (status %lx). Clearing.\n", status.x[0]); + xip_disable(map, chip, cmd_adr); + map_write(map, CMD(0x50), cmd_adr); + map_write(map, CMD(0x70), cmd_adr); + } + + chip->state = FL_WRITING_TO_BUFFER; + map_write(map, write_cmd, cmd_adr); + ret = WAIT_TIMEOUT(map, chip, cmd_adr, 0, 0); + if (ret) { + /* Argh. Not ready for write to buffer */ + map_word Xstatus = map_read(map, cmd_adr); + map_write(map, CMD(0x70), cmd_adr); + chip->state = FL_STATUS; + status = map_read(map, cmd_adr); + map_write(map, CMD(0x50), cmd_adr); + map_write(map, CMD(0x70), cmd_adr); + xip_enable(map, chip, cmd_adr); + printk(KERN_ERR "%s: Chip not ready for buffer write. Xstatus = %lx, status = %lx\n", + map->name, Xstatus.x[0], status.x[0]); + goto out; + } + + /* Figure out the number of words to write */ + word_gap = (-adr & (map_bankwidth(map)-1)); + words = DIV_ROUND_UP(len - word_gap, map_bankwidth(map)); + if (!word_gap) { + words--; + } else { + word_gap = map_bankwidth(map) - word_gap; + adr -= word_gap; + datum = map_word_ff(map); + } + + /* Write length of data to come */ + map_write(map, CMD(words), cmd_adr ); + + /* Write data */ + vec = *pvec; + vec_seek = *pvec_seek; + do { + int n = map_bankwidth(map) - word_gap; + if (n > vec->iov_len - vec_seek) + n = vec->iov_len - vec_seek; + if (n > len) + n = len; + + if (!word_gap && len < map_bankwidth(map)) + datum = map_word_ff(map); + + datum = map_word_load_partial(map, datum, + vec->iov_base + vec_seek, + word_gap, n); + + len -= n; + word_gap += n; + if (!len || word_gap == map_bankwidth(map)) { + map_write(map, datum, adr); + adr += map_bankwidth(map); + word_gap = 0; + } + + vec_seek += n; + if (vec_seek == vec->iov_len) { + vec++; + vec_seek = 0; + } + } while (len); + *pvec = vec; + *pvec_seek = vec_seek; + + /* GO GO GO */ + map_write(map, CMD(0xd0), cmd_adr); + chip->state = FL_WRITING; + + ret = INVAL_CACHE_AND_WAIT(map, chip, cmd_adr, + initial_adr, initial_len, + chip->buffer_write_time, + chip->buffer_write_time_max); + if (ret) { + map_write(map, CMD(0x70), cmd_adr); + chip->state = FL_STATUS; + xip_enable(map, chip, cmd_adr); + printk(KERN_ERR "%s: buffer write error (status timeout)\n", map->name); + goto out; + } + + /* check for errors */ + status = map_read(map, cmd_adr); + if (map_word_bitsset(map, status, CMD(0x1a))) { + unsigned long chipstatus = MERGESTATUS(status); + + /* reset status */ + map_write(map, CMD(0x50), cmd_adr); + map_write(map, CMD(0x70), cmd_adr); + xip_enable(map, chip, cmd_adr); + + if (chipstatus & 0x02) { + ret = -EROFS; + } else if (chipstatus & 0x08) { + printk(KERN_ERR "%s: buffer write error (bad VPP)\n", map->name); + ret = -EIO; + } else { + printk(KERN_ERR "%s: buffer write error (status 0x%lx)\n", map->name, chipstatus); + ret = -EINVAL; + } + + goto out; + } + + xip_enable(map, chip, cmd_adr); + out: DISABLE_VPP(map); + put_chip(map, chip, cmd_adr); + mutex_unlock(&chip->mutex); + return ret; +} + +static int cfi_intelext_writev (struct mtd_info *mtd, const struct kvec *vecs, + unsigned long count, loff_t to, size_t *retlen) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int wbufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize; + int ret; + int chipnum; + unsigned long ofs, vec_seek, i; + size_t len = 0; + + for (i = 0; i < count; i++) + len += vecs[i].iov_len; + + if (!len) + return 0; + + chipnum = to >> cfi->chipshift; + ofs = to - (chipnum << cfi->chipshift); + vec_seek = 0; + + do { + /* We must not cross write block boundaries */ + int size = wbufsize - (ofs & (wbufsize-1)); + + if (size > len) + size = len; + ret = do_write_buffer(map, &cfi->chips[chipnum], + ofs, &vecs, &vec_seek, size); + if (ret) + return ret; + + ofs += size; + (*retlen) += size; + len -= size; + + if (ofs >> cfi->chipshift) { + chipnum ++; + ofs = 0; + if (chipnum == cfi->numchips) + return 0; + } + + /* Be nice and reschedule with the chip in a usable state for other + processes. */ + cond_resched(); + + } while (len); + + return 0; +} + +static int cfi_intelext_write_buffers (struct mtd_info *mtd, loff_t to, + size_t len, size_t *retlen, const u_char *buf) +{ + struct kvec vec; + + vec.iov_base = (void *) buf; + vec.iov_len = len; + + return cfi_intelext_writev(mtd, &vec, 1, to, retlen); +} + +static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, + unsigned long adr, int len, void *thunk) +{ + struct cfi_private *cfi = map->fldrv_priv; + map_word status; + int retries = 3; + int ret; + + adr += chip->start; + + retry: + mutex_lock(&chip->mutex); + ret = get_chip(map, chip, adr, FL_ERASING); + if (ret) { + mutex_unlock(&chip->mutex); + return ret; + } + + XIP_INVAL_CACHED_RANGE(map, adr, len); + ENABLE_VPP(map); + xip_disable(map, chip, adr); + + /* Clear the status register first */ + map_write(map, CMD(0x50), adr); + + /* Now erase */ + map_write(map, CMD(0x20), adr); + map_write(map, CMD(0xD0), adr); + chip->state = FL_ERASING; + chip->erase_suspended = 0; + chip->in_progress_block_addr = adr; + chip->in_progress_block_mask = ~(len - 1); + + ret = INVAL_CACHE_AND_WAIT(map, chip, adr, + adr, len, + chip->erase_time, + chip->erase_time_max); + if (ret) { + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + xip_enable(map, chip, adr); + printk(KERN_ERR "%s: block erase error: (status timeout)\n", map->name); + goto out; + } + + /* We've broken this before. It doesn't hurt to be safe */ + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + status = map_read(map, adr); + + /* check for errors */ + if (map_word_bitsset(map, status, CMD(0x3a))) { + unsigned long chipstatus = MERGESTATUS(status); + + /* Reset the error bits */ + map_write(map, CMD(0x50), adr); + map_write(map, CMD(0x70), adr); + xip_enable(map, chip, adr); + + if ((chipstatus & 0x30) == 0x30) { + printk(KERN_ERR "%s: block erase error: (bad command sequence, status 0x%lx)\n", map->name, chipstatus); + ret = -EINVAL; + } else if (chipstatus & 0x02) { + /* Protection bit set */ + ret = -EROFS; + } else if (chipstatus & 0x8) { + /* Voltage */ + printk(KERN_ERR "%s: block erase error: (bad VPP)\n", map->name); + ret = -EIO; + } else if (chipstatus & 0x20 && retries--) { + printk(KERN_DEBUG "block erase failed at 0x%08lx: status 0x%lx. Retrying...\n", adr, chipstatus); + DISABLE_VPP(map); + put_chip(map, chip, adr); + mutex_unlock(&chip->mutex); + goto retry; + } else { + printk(KERN_ERR "%s: block erase failed at 0x%08lx (status 0x%lx)\n", map->name, adr, chipstatus); + ret = -EIO; + } + + goto out; + } + + xip_enable(map, chip, adr); + out: DISABLE_VPP(map); + put_chip(map, chip, adr); + mutex_unlock(&chip->mutex); + return ret; +} + +static int cfi_intelext_erase_varsize(struct mtd_info *mtd, struct erase_info *instr) +{ + return cfi_varsize_frob(mtd, do_erase_oneblock, instr->addr, + instr->len, NULL); +} + +static void cfi_intelext_sync (struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int i; + struct flchip *chip; + int ret = 0; + + for (i=0; !ret && i<cfi->numchips; i++) { + chip = &cfi->chips[i]; + + mutex_lock(&chip->mutex); + ret = get_chip(map, chip, chip->start, FL_SYNCING); + + if (!ret) { + chip->oldstate = chip->state; + chip->state = FL_SYNCING; + /* No need to wake_up() on this state change - + * as the whole point is that nobody can do anything + * with the chip now anyway. + */ + } + mutex_unlock(&chip->mutex); + } + + /* Unlock the chips again */ + + for (i--; i >=0; i--) { + chip = &cfi->chips[i]; + + mutex_lock(&chip->mutex); + + if (chip->state == FL_SYNCING) { + chip->state = chip->oldstate; + chip->oldstate = FL_READY; + wake_up(&chip->wq); + } + mutex_unlock(&chip->mutex); + } +} + +static int __xipram do_getlockstatus_oneblock(struct map_info *map, + struct flchip *chip, + unsigned long adr, + int len, void *thunk) +{ + struct cfi_private *cfi = map->fldrv_priv; + int status, ofs_factor = cfi->interleave * cfi->device_type; + + adr += chip->start; + xip_disable(map, chip, adr+(2*ofs_factor)); + map_write(map, CMD(0x90), adr+(2*ofs_factor)); + chip->state = FL_JEDEC_QUERY; + status = cfi_read_query(map, adr+(2*ofs_factor)); + xip_enable(map, chip, 0); + return status; +} + +#ifdef DEBUG_LOCK_BITS +static int __xipram do_printlockstatus_oneblock(struct map_info *map, + struct flchip *chip, + unsigned long adr, + int len, void *thunk) +{ + printk(KERN_DEBUG "block status register for 0x%08lx is %x\n", + adr, do_getlockstatus_oneblock(map, chip, adr, len, thunk)); + return 0; +} +#endif + +#define DO_XXLOCK_ONEBLOCK_LOCK ((void *) 1) +#define DO_XXLOCK_ONEBLOCK_UNLOCK ((void *) 2) + +static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip, + unsigned long adr, int len, void *thunk) +{ + struct cfi_private *cfi = map->fldrv_priv; + struct cfi_pri_intelext *extp = cfi->cmdset_priv; + int mdelay; + int ret; + + adr += chip->start; + + mutex_lock(&chip->mutex); + ret = get_chip(map, chip, adr, FL_LOCKING); + if (ret) { + mutex_unlock(&chip->mutex); + return ret; + } + + ENABLE_VPP(map); + xip_disable(map, chip, adr); + + map_write(map, CMD(0x60), adr); + if (thunk == DO_XXLOCK_ONEBLOCK_LOCK) { + map_write(map, CMD(0x01), adr); + chip->state = FL_LOCKING; + } else if (thunk == DO_XXLOCK_ONEBLOCK_UNLOCK) { + map_write(map, CMD(0xD0), adr); + chip->state = FL_UNLOCKING; + } else + BUG(); + + /* + * If Instant Individual Block Locking supported then no need + * to delay. + */ + /* + * Unlocking may take up to 1.4 seconds on some Intel flashes. So + * lets use a max of 1.5 seconds (1500ms) as timeout. + * + * See "Clear Block Lock-Bits Time" on page 40 in + * "3 Volt Intel StrataFlash Memory" 28F128J3,28F640J3,28F320J3 manual + * from February 2003 + */ + mdelay = (!extp || !(extp->FeatureSupport & (1 << 5))) ? 1500 : 0; + + ret = WAIT_TIMEOUT(map, chip, adr, mdelay, mdelay * 1000); + if (ret) { + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + xip_enable(map, chip, adr); + printk(KERN_ERR "%s: block unlock error: (status timeout)\n", map->name); + goto out; + } + + xip_enable(map, chip, adr); + out: DISABLE_VPP(map); + put_chip(map, chip, adr); + mutex_unlock(&chip->mutex); + return ret; +} + +static int cfi_intelext_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + int ret; + +#ifdef DEBUG_LOCK_BITS + printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n", + __func__, ofs, len); + cfi_varsize_frob(mtd, do_printlockstatus_oneblock, + ofs, len, NULL); +#endif + + ret = cfi_varsize_frob(mtd, do_xxlock_oneblock, + ofs, len, DO_XXLOCK_ONEBLOCK_LOCK); + +#ifdef DEBUG_LOCK_BITS + printk(KERN_DEBUG "%s: lock status after, ret=%d\n", + __func__, ret); + cfi_varsize_frob(mtd, do_printlockstatus_oneblock, + ofs, len, NULL); +#endif + + return ret; +} + +static int cfi_intelext_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + int ret; + +#ifdef DEBUG_LOCK_BITS + printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n", + __func__, ofs, len); + cfi_varsize_frob(mtd, do_printlockstatus_oneblock, + ofs, len, NULL); +#endif + + ret = cfi_varsize_frob(mtd, do_xxlock_oneblock, + ofs, len, DO_XXLOCK_ONEBLOCK_UNLOCK); + +#ifdef DEBUG_LOCK_BITS + printk(KERN_DEBUG "%s: lock status after, ret=%d\n", + __func__, ret); + cfi_varsize_frob(mtd, do_printlockstatus_oneblock, + ofs, len, NULL); +#endif + + return ret; +} + +static int cfi_intelext_is_locked(struct mtd_info *mtd, loff_t ofs, + uint64_t len) +{ + return cfi_varsize_frob(mtd, do_getlockstatus_oneblock, + ofs, len, NULL) ? 1 : 0; +} + +#ifdef CONFIG_MTD_OTP + +typedef int (*otp_op_t)(struct map_info *map, struct flchip *chip, + u_long data_offset, u_char *buf, u_int size, + u_long prot_offset, u_int groupno, u_int groupsize); + +static int __xipram +do_otp_read(struct map_info *map, struct flchip *chip, u_long offset, + u_char *buf, u_int size, u_long prot, u_int grpno, u_int grpsz) +{ + struct cfi_private *cfi = map->fldrv_priv; + int ret; + + mutex_lock(&chip->mutex); + ret = get_chip(map, chip, chip->start, FL_JEDEC_QUERY); + if (ret) { + mutex_unlock(&chip->mutex); + return ret; + } + + /* let's ensure we're not reading back cached data from array mode */ + INVALIDATE_CACHED_RANGE(map, chip->start + offset, size); + + xip_disable(map, chip, chip->start); + if (chip->state != FL_JEDEC_QUERY) { + map_write(map, CMD(0x90), chip->start); + chip->state = FL_JEDEC_QUERY; + } + map_copy_from(map, buf, chip->start + offset, size); + xip_enable(map, chip, chip->start); + + /* then ensure we don't keep OTP data in the cache */ + INVALIDATE_CACHED_RANGE(map, chip->start + offset, size); + + put_chip(map, chip, chip->start); + mutex_unlock(&chip->mutex); + return 0; +} + +static int +do_otp_write(struct map_info *map, struct flchip *chip, u_long offset, + u_char *buf, u_int size, u_long prot, u_int grpno, u_int grpsz) +{ + int ret; + + while (size) { + unsigned long bus_ofs = offset & ~(map_bankwidth(map)-1); + int gap = offset - bus_ofs; + int n = min_t(int, size, map_bankwidth(map)-gap); + map_word datum = map_word_ff(map); + + datum = map_word_load_partial(map, datum, buf, gap, n); + ret = do_write_oneword(map, chip, bus_ofs, datum, FL_OTP_WRITE); + if (ret) + return ret; + + offset += n; + buf += n; + size -= n; + } + + return 0; +} + +static int +do_otp_lock(struct map_info *map, struct flchip *chip, u_long offset, + u_char *buf, u_int size, u_long prot, u_int grpno, u_int grpsz) +{ + struct cfi_private *cfi = map->fldrv_priv; + map_word datum; + + /* make sure area matches group boundaries */ + if (size != grpsz) + return -EXDEV; + + datum = map_word_ff(map); + datum = map_word_clr(map, datum, CMD(1 << grpno)); + return do_write_oneword(map, chip, prot, datum, FL_OTP_WRITE); +} + +static int cfi_intelext_otp_walk(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf, + otp_op_t action, int user_regs) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + struct cfi_pri_intelext *extp = cfi->cmdset_priv; + struct flchip *chip; + struct cfi_intelext_otpinfo *otp; + u_long devsize, reg_prot_offset, data_offset; + u_int chip_num, chip_step, field, reg_fact_size, reg_user_size; + u_int groups, groupno, groupsize, reg_fact_groups, reg_user_groups; + int ret; + + *retlen = 0; + + /* Check that we actually have some OTP registers */ + if (!extp || !(extp->FeatureSupport & 64) || !extp->NumProtectionFields) + return -ENODATA; + + /* we need real chips here not virtual ones */ + devsize = (1 << cfi->cfiq->DevSize) * cfi->interleave; + chip_step = devsize >> cfi->chipshift; + chip_num = 0; + + /* Some chips have OTP located in the _top_ partition only. + For example: Intel 28F256L18T (T means top-parameter device) */ + if (cfi->mfr == CFI_MFR_INTEL) { + switch (cfi->id) { + case 0x880b: + case 0x880c: + case 0x880d: + chip_num = chip_step - 1; + } + } + + for ( ; chip_num < cfi->numchips; chip_num += chip_step) { + chip = &cfi->chips[chip_num]; + otp = (struct cfi_intelext_otpinfo *)&extp->extra[0]; + + /* first OTP region */ + field = 0; + reg_prot_offset = extp->ProtRegAddr; + reg_fact_groups = 1; + reg_fact_size = 1 << extp->FactProtRegSize; + reg_user_groups = 1; + reg_user_size = 1 << extp->UserProtRegSize; + + while (len > 0) { + /* flash geometry fixup */ + data_offset = reg_prot_offset + 1; + data_offset *= cfi->interleave * cfi->device_type; + reg_prot_offset *= cfi->interleave * cfi->device_type; + reg_fact_size *= cfi->interleave; + reg_user_size *= cfi->interleave; + + if (user_regs) { + groups = reg_user_groups; + groupsize = reg_user_size; + /* skip over factory reg area */ + groupno = reg_fact_groups; + data_offset += reg_fact_groups * reg_fact_size; + } else { + groups = reg_fact_groups; + groupsize = reg_fact_size; + groupno = 0; + } + + while (len > 0 && groups > 0) { + if (!action) { + /* + * Special case: if action is NULL + * we fill buf with otp_info records. + */ + struct otp_info *otpinfo; + map_word lockword; + len -= sizeof(struct otp_info); + if (len <= 0) + return -ENOSPC; + ret = do_otp_read(map, chip, + reg_prot_offset, + (u_char *)&lockword, + map_bankwidth(map), + 0, 0, 0); + if (ret) + return ret; + otpinfo = (struct otp_info *)buf; + otpinfo->start = from; + otpinfo->length = groupsize; + otpinfo->locked = + !map_word_bitsset(map, lockword, + CMD(1 << groupno)); + from += groupsize; + buf += sizeof(*otpinfo); + *retlen += sizeof(*otpinfo); + } else if (from >= groupsize) { + from -= groupsize; + data_offset += groupsize; + } else { + int size = groupsize; + data_offset += from; + size -= from; + from = 0; + if (size > len) + size = len; + ret = action(map, chip, data_offset, + buf, size, reg_prot_offset, + groupno, groupsize); + if (ret < 0) + return ret; + buf += size; + len -= size; + *retlen += size; + data_offset += size; + } + groupno++; + groups--; + } + + /* next OTP region */ + if (++field == extp->NumProtectionFields) + break; + reg_prot_offset = otp->ProtRegAddr; + reg_fact_groups = otp->FactGroups; + reg_fact_size = 1 << otp->FactProtRegSize; + reg_user_groups = otp->UserGroups; + reg_user_size = 1 << otp->UserProtRegSize; + otp++; + } + } + + return 0; +} + +static int cfi_intelext_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, + u_char *buf) +{ + return cfi_intelext_otp_walk(mtd, from, len, retlen, + buf, do_otp_read, 0); +} + +static int cfi_intelext_read_user_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, + u_char *buf) +{ + return cfi_intelext_otp_walk(mtd, from, len, retlen, + buf, do_otp_read, 1); +} + +static int cfi_intelext_write_user_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, + u_char *buf) +{ + return cfi_intelext_otp_walk(mtd, from, len, retlen, + buf, do_otp_write, 1); +} + +static int cfi_intelext_lock_user_prot_reg(struct mtd_info *mtd, + loff_t from, size_t len) +{ + size_t retlen; + return cfi_intelext_otp_walk(mtd, from, len, &retlen, + NULL, do_otp_lock, 1); +} + +static int cfi_intelext_get_fact_prot_info(struct mtd_info *mtd, size_t len, + size_t *retlen, struct otp_info *buf) + +{ + return cfi_intelext_otp_walk(mtd, 0, len, retlen, (u_char *)buf, + NULL, 0); +} + +static int cfi_intelext_get_user_prot_info(struct mtd_info *mtd, size_t len, + size_t *retlen, struct otp_info *buf) +{ + return cfi_intelext_otp_walk(mtd, 0, len, retlen, (u_char *)buf, + NULL, 1); +} + +#endif + +static void cfi_intelext_save_locks(struct mtd_info *mtd) +{ + struct mtd_erase_region_info *region; + int block, status, i; + unsigned long adr; + size_t len; + + for (i = 0; i < mtd->numeraseregions; i++) { + region = &mtd->eraseregions[i]; + if (!region->lockmap) + continue; + + for (block = 0; block < region->numblocks; block++){ + len = region->erasesize; + adr = region->offset + block * len; + + status = cfi_varsize_frob(mtd, + do_getlockstatus_oneblock, adr, len, NULL); + if (status) + set_bit(block, region->lockmap); + else + clear_bit(block, region->lockmap); + } + } +} + +static int cfi_intelext_suspend(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + struct cfi_pri_intelext *extp = cfi->cmdset_priv; + int i; + struct flchip *chip; + int ret = 0; + + if ((mtd->flags & MTD_POWERUP_LOCK) + && extp && (extp->FeatureSupport & (1 << 5))) + cfi_intelext_save_locks(mtd); + + for (i=0; !ret && i<cfi->numchips; i++) { + chip = &cfi->chips[i]; + + mutex_lock(&chip->mutex); + + switch (chip->state) { + case FL_READY: + case FL_STATUS: + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + if (chip->oldstate == FL_READY) { + /* place the chip in a known state before suspend */ + map_write(map, CMD(0xFF), cfi->chips[i].start); + chip->oldstate = chip->state; + chip->state = FL_PM_SUSPENDED; + /* No need to wake_up() on this state change - + * as the whole point is that nobody can do anything + * with the chip now anyway. + */ + } else { + /* There seems to be an operation pending. We must wait for it. */ + printk(KERN_NOTICE "Flash device refused suspend due to pending operation (oldstate %d)\n", chip->oldstate); + ret = -EAGAIN; + } + break; + default: + /* Should we actually wait? Once upon a time these routines weren't + allowed to. Or should we return -EAGAIN, because the upper layers + ought to have already shut down anything which was using the device + anyway? The latter for now. */ + printk(KERN_NOTICE "Flash device refused suspend due to active operation (state %d)\n", chip->state); + ret = -EAGAIN; + case FL_PM_SUSPENDED: + break; + } + mutex_unlock(&chip->mutex); + } + + /* Unlock the chips again */ + + if (ret) { + for (i--; i >=0; i--) { + chip = &cfi->chips[i]; + + mutex_lock(&chip->mutex); + + if (chip->state == FL_PM_SUSPENDED) { + /* No need to force it into a known state here, + because we're returning failure, and it didn't + get power cycled */ + chip->state = chip->oldstate; + chip->oldstate = FL_READY; + wake_up(&chip->wq); + } + mutex_unlock(&chip->mutex); + } + } + + return ret; +} + +static void cfi_intelext_restore_locks(struct mtd_info *mtd) +{ + struct mtd_erase_region_info *region; + int block, i; + unsigned long adr; + size_t len; + + for (i = 0; i < mtd->numeraseregions; i++) { + region = &mtd->eraseregions[i]; + if (!region->lockmap) + continue; + + for_each_clear_bit(block, region->lockmap, region->numblocks) { + len = region->erasesize; + adr = region->offset + block * len; + cfi_intelext_unlock(mtd, adr, len); + } + } +} + +static void cfi_intelext_resume(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + struct cfi_pri_intelext *extp = cfi->cmdset_priv; + int i; + struct flchip *chip; + + for (i=0; i<cfi->numchips; i++) { + + chip = &cfi->chips[i]; + + mutex_lock(&chip->mutex); + + /* Go to known state. Chip may have been power cycled */ + if (chip->state == FL_PM_SUSPENDED) { + /* Refresh LH28F640BF Partition Config. Register */ + fixup_LH28F640BF(mtd); + map_write(map, CMD(0xFF), cfi->chips[i].start); + chip->oldstate = chip->state = FL_READY; + wake_up(&chip->wq); + } + + mutex_unlock(&chip->mutex); + } + + if ((mtd->flags & MTD_POWERUP_LOCK) + && extp && (extp->FeatureSupport & (1 << 5))) + cfi_intelext_restore_locks(mtd); +} + +static int cfi_intelext_reset(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int i, ret; + + for (i=0; i < cfi->numchips; i++) { + struct flchip *chip = &cfi->chips[i]; + + /* force the completion of any ongoing operation + and switch to array mode so any bootloader in + flash is accessible for soft reboot. */ + mutex_lock(&chip->mutex); + ret = get_chip(map, chip, chip->start, FL_SHUTDOWN); + if (!ret) { + map_write(map, CMD(0xff), chip->start); + chip->state = FL_SHUTDOWN; + put_chip(map, chip, chip->start); + } + mutex_unlock(&chip->mutex); + } + + return 0; +} + +static int cfi_intelext_reboot(struct notifier_block *nb, unsigned long val, + void *v) +{ + struct mtd_info *mtd; + + mtd = container_of(nb, struct mtd_info, reboot_notifier); + cfi_intelext_reset(mtd); + return NOTIFY_DONE; +} + +static void cfi_intelext_destroy(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + struct mtd_erase_region_info *region; + int i; + cfi_intelext_reset(mtd); + unregister_reboot_notifier(&mtd->reboot_notifier); + kfree(cfi->cmdset_priv); + kfree(cfi->cfiq); + kfree(cfi->chips[0].priv); + kfree(cfi); + for (i = 0; i < mtd->numeraseregions; i++) { + region = &mtd->eraseregions[i]; + kfree(region->lockmap); + } + kfree(mtd->eraseregions); +} + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al."); +MODULE_DESCRIPTION("MTD chip driver for Intel/Sharp flash chips"); +MODULE_ALIAS("cfi_cmdset_0003"); +MODULE_ALIAS("cfi_cmdset_0200"); diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c new file mode 100644 index 000000000..9bd65f3f8 --- /dev/null +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -0,0 +1,3109 @@ +/* + * Common Flash Interface support: + * AMD & Fujitsu Standard Vendor Command Set (ID 0x0002) + * + * Copyright (C) 2000 Crossnet Co. <info@crossnet.co.jp> + * Copyright (C) 2004 Arcom Control Systems Ltd <linux@arcom.com> + * Copyright (C) 2005 MontaVista Software Inc. <source@mvista.com> + * + * 2_by_8 routines added by Simon Munton + * + * 4_by_16 work by Carolyn J. Smith + * + * XIP support hooks by Vitaly Wool (based on code for Intel flash + * by Nicolas Pitre) + * + * 25/09/2008 Christopher Moore: TopBottom fixup for many Macronix with CFI V1.0 + * + * Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com + * + * This code is GPL + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <asm/io.h> +#include <asm/byteorder.h> + +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/reboot.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/mtd/map.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/cfi.h> +#include <linux/mtd/xip.h> + +#define AMD_BOOTLOC_BUG +#define FORCE_WORD_WRITE 0 + +#define MAX_RETRIES 3 + +#define SST49LF004B 0x0060 +#define SST49LF040B 0x0050 +#define SST49LF008A 0x005a +#define AT49BV6416 0x00d6 + +/* + * Status Register bit description. Used by flash devices that don't + * support DQ polling (e.g. HyperFlash) + */ +#define CFI_SR_DRB BIT(7) +#define CFI_SR_ESB BIT(5) +#define CFI_SR_PSB BIT(4) +#define CFI_SR_WBASB BIT(3) +#define CFI_SR_SLSB BIT(1) + +enum cfi_quirks { + CFI_QUIRK_DQ_TRUE_DATA = BIT(0), +}; + +static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); +static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); +#if !FORCE_WORD_WRITE +static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); +#endif +static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *); +static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *); +static void cfi_amdstd_sync (struct mtd_info *); +static int cfi_amdstd_suspend (struct mtd_info *); +static void cfi_amdstd_resume (struct mtd_info *); +static int cfi_amdstd_reboot(struct notifier_block *, unsigned long, void *); +static int cfi_amdstd_get_fact_prot_info(struct mtd_info *, size_t, + size_t *, struct otp_info *); +static int cfi_amdstd_get_user_prot_info(struct mtd_info *, size_t, + size_t *, struct otp_info *); +static int cfi_amdstd_secsi_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); +static int cfi_amdstd_read_fact_prot_reg(struct mtd_info *, loff_t, size_t, + size_t *, u_char *); +static int cfi_amdstd_read_user_prot_reg(struct mtd_info *, loff_t, size_t, + size_t *, u_char *); +static int cfi_amdstd_write_user_prot_reg(struct mtd_info *, loff_t, size_t, + size_t *, u_char *); +static int cfi_amdstd_lock_user_prot_reg(struct mtd_info *, loff_t, size_t); + +static int cfi_amdstd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf); + +static void cfi_amdstd_destroy(struct mtd_info *); + +struct mtd_info *cfi_cmdset_0002(struct map_info *, int); +static struct mtd_info *cfi_amdstd_setup (struct mtd_info *); + +static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr, int mode); +static void put_chip(struct map_info *map, struct flchip *chip, unsigned long adr); +#include "fwh_lock.h" + +static int cfi_atmel_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +static int cfi_atmel_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); + +static int cfi_ppb_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +static int cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +static int cfi_ppb_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len); + +static struct mtd_chip_driver cfi_amdstd_chipdrv = { + .probe = NULL, /* Not usable directly */ + .destroy = cfi_amdstd_destroy, + .name = "cfi_cmdset_0002", + .module = THIS_MODULE +}; + +/* + * Use status register to poll for Erase/write completion when DQ is not + * supported. This is indicated by Bit[1:0] of SoftwareFeatures field in + * CFI Primary Vendor-Specific Extended Query table 1.5 + */ +static int cfi_use_status_reg(struct cfi_private *cfi) +{ + struct cfi_pri_amdstd *extp = cfi->cmdset_priv; + u8 poll_mask = CFI_POLL_STATUS_REG | CFI_POLL_DQ; + + return extp && extp->MinorVersion >= '5' && + (extp->SoftwareFeatures & poll_mask) == CFI_POLL_STATUS_REG; +} + +static int cfi_check_err_status(struct map_info *map, struct flchip *chip, + unsigned long adr) +{ + struct cfi_private *cfi = map->fldrv_priv; + map_word status; + + if (!cfi_use_status_reg(cfi)) + return 0; + + cfi_send_gen_cmd(0x70, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + status = map_read(map, adr); + + /* The error bits are invalid while the chip's busy */ + if (!map_word_bitsset(map, status, CMD(CFI_SR_DRB))) + return 0; + + if (map_word_bitsset(map, status, CMD(0x3a))) { + unsigned long chipstatus = MERGESTATUS(status); + + if (chipstatus & CFI_SR_ESB) + pr_err("%s erase operation failed, status %lx\n", + map->name, chipstatus); + if (chipstatus & CFI_SR_PSB) + pr_err("%s program operation failed, status %lx\n", + map->name, chipstatus); + if (chipstatus & CFI_SR_WBASB) + pr_err("%s buffer program command aborted, status %lx\n", + map->name, chipstatus); + if (chipstatus & CFI_SR_SLSB) + pr_err("%s sector write protected, status %lx\n", + map->name, chipstatus); + + /* Erase/Program status bits are set on the operation failure */ + if (chipstatus & (CFI_SR_ESB | CFI_SR_PSB)) + return 1; + } + return 0; +} + +/* #define DEBUG_CFI_FEATURES */ + + +#ifdef DEBUG_CFI_FEATURES +static void cfi_tell_features(struct cfi_pri_amdstd *extp) +{ + const char* erase_suspend[3] = { + "Not supported", "Read only", "Read/write" + }; + const char* top_bottom[6] = { + "No WP", "8x8KiB sectors at top & bottom, no WP", + "Bottom boot", "Top boot", + "Uniform, Bottom WP", "Uniform, Top WP" + }; + + printk(" Silicon revision: %d\n", extp->SiliconRevision >> 1); + printk(" Address sensitive unlock: %s\n", + (extp->SiliconRevision & 1) ? "Not required" : "Required"); + + if (extp->EraseSuspend < ARRAY_SIZE(erase_suspend)) + printk(" Erase Suspend: %s\n", erase_suspend[extp->EraseSuspend]); + else + printk(" Erase Suspend: Unknown value %d\n", extp->EraseSuspend); + + if (extp->BlkProt == 0) + printk(" Block protection: Not supported\n"); + else + printk(" Block protection: %d sectors per group\n", extp->BlkProt); + + + printk(" Temporary block unprotect: %s\n", + extp->TmpBlkUnprotect ? "Supported" : "Not supported"); + printk(" Block protect/unprotect scheme: %d\n", extp->BlkProtUnprot); + printk(" Number of simultaneous operations: %d\n", extp->SimultaneousOps); + printk(" Burst mode: %s\n", + extp->BurstMode ? "Supported" : "Not supported"); + if (extp->PageMode == 0) + printk(" Page mode: Not supported\n"); + else + printk(" Page mode: %d word page\n", extp->PageMode << 2); + + printk(" Vpp Supply Minimum Program/Erase Voltage: %d.%d V\n", + extp->VppMin >> 4, extp->VppMin & 0xf); + printk(" Vpp Supply Maximum Program/Erase Voltage: %d.%d V\n", + extp->VppMax >> 4, extp->VppMax & 0xf); + + if (extp->TopBottom < ARRAY_SIZE(top_bottom)) + printk(" Top/Bottom Boot Block: %s\n", top_bottom[extp->TopBottom]); + else + printk(" Top/Bottom Boot Block: Unknown value %d\n", extp->TopBottom); +} +#endif + +#ifdef AMD_BOOTLOC_BUG +/* Wheee. Bring me the head of someone at AMD. */ +static void fixup_amd_bootblock(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + struct cfi_pri_amdstd *extp = cfi->cmdset_priv; + __u8 major = extp->MajorVersion; + __u8 minor = extp->MinorVersion; + + if (((major << 8) | minor) < 0x3131) { + /* CFI version 1.0 => don't trust bootloc */ + + pr_debug("%s: JEDEC Vendor ID is 0x%02X Device ID is 0x%02X\n", + map->name, cfi->mfr, cfi->id); + + /* AFAICS all 29LV400 with a bottom boot block have a device ID + * of 0x22BA in 16-bit mode and 0xBA in 8-bit mode. + * These were badly detected as they have the 0x80 bit set + * so treat them as a special case. + */ + if (((cfi->id == 0xBA) || (cfi->id == 0x22BA)) && + + /* Macronix added CFI to their 2nd generation + * MX29LV400C B/T but AFAICS no other 29LV400 (AMD, + * Fujitsu, Spansion, EON, ESI and older Macronix) + * has CFI. + * + * Therefore also check the manufacturer. + * This reduces the risk of false detection due to + * the 8-bit device ID. + */ + (cfi->mfr == CFI_MFR_MACRONIX)) { + pr_debug("%s: Macronix MX29LV400C with bottom boot block" + " detected\n", map->name); + extp->TopBottom = 2; /* bottom boot */ + } else + if (cfi->id & 0x80) { + printk(KERN_WARNING "%s: JEDEC Device ID is 0x%02X. Assuming broken CFI table.\n", map->name, cfi->id); + extp->TopBottom = 3; /* top boot */ + } else { + extp->TopBottom = 2; /* bottom boot */ + } + + pr_debug("%s: AMD CFI PRI V%c.%c has no boot block field;" + " deduced %s from Device ID\n", map->name, major, minor, + extp->TopBottom == 2 ? "bottom" : "top"); + } +} +#endif + +#if !FORCE_WORD_WRITE +static void fixup_use_write_buffers(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + if (cfi->cfiq->BufWriteTimeoutTyp) { + pr_debug("Using buffer write method\n"); + mtd->_write = cfi_amdstd_write_buffers; + } +} +#endif /* !FORCE_WORD_WRITE */ + +/* Atmel chips don't use the same PRI format as AMD chips */ +static void fixup_convert_atmel_pri(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + struct cfi_pri_amdstd *extp = cfi->cmdset_priv; + struct cfi_pri_atmel atmel_pri; + + memcpy(&atmel_pri, extp, sizeof(atmel_pri)); + memset((char *)extp + 5, 0, sizeof(*extp) - 5); + + if (atmel_pri.Features & 0x02) + extp->EraseSuspend = 2; + + /* Some chips got it backwards... */ + if (cfi->id == AT49BV6416) { + if (atmel_pri.BottomBoot) + extp->TopBottom = 3; + else + extp->TopBottom = 2; + } else { + if (atmel_pri.BottomBoot) + extp->TopBottom = 2; + else + extp->TopBottom = 3; + } + + /* burst write mode not supported */ + cfi->cfiq->BufWriteTimeoutTyp = 0; + cfi->cfiq->BufWriteTimeoutMax = 0; +} + +static void fixup_use_secsi(struct mtd_info *mtd) +{ + /* Setup for chips with a secsi area */ + mtd->_read_user_prot_reg = cfi_amdstd_secsi_read; + mtd->_read_fact_prot_reg = cfi_amdstd_secsi_read; +} + +static void fixup_use_erase_chip(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + if ((cfi->cfiq->NumEraseRegions == 1) && + ((cfi->cfiq->EraseRegionInfo[0] & 0xffff) == 0)) { + mtd->_erase = cfi_amdstd_erase_chip; + } + +} + +/* + * Some Atmel chips (e.g. the AT49BV6416) power-up with all sectors + * locked by default. + */ +static void fixup_use_atmel_lock(struct mtd_info *mtd) +{ + mtd->_lock = cfi_atmel_lock; + mtd->_unlock = cfi_atmel_unlock; + mtd->flags |= MTD_POWERUP_LOCK; +} + +static void fixup_old_sst_eraseregion(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + + /* + * These flashes report two separate eraseblock regions based on the + * sector_erase-size and block_erase-size, although they both operate on the + * same memory. This is not allowed according to CFI, so we just pick the + * sector_erase-size. + */ + cfi->cfiq->NumEraseRegions = 1; +} + +static void fixup_sst39vf(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + + fixup_old_sst_eraseregion(mtd); + + cfi->addr_unlock1 = 0x5555; + cfi->addr_unlock2 = 0x2AAA; +} + +static void fixup_sst39vf_rev_b(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + + fixup_old_sst_eraseregion(mtd); + + cfi->addr_unlock1 = 0x555; + cfi->addr_unlock2 = 0x2AA; + + cfi->sector_erase_cmd = CMD(0x50); +} + +static void fixup_sst38vf640x_sectorsize(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + + fixup_sst39vf_rev_b(mtd); + + /* + * CFI reports 1024 sectors (0x03ff+1) of 64KBytes (0x0100*256) where + * it should report a size of 8KBytes (0x0020*256). + */ + cfi->cfiq->EraseRegionInfo[0] = 0x002003ff; + pr_warn("%s: Bad 38VF640x CFI data; adjusting sector size from 64 to 8KiB\n", + mtd->name); +} + +static void fixup_s29gl064n_sectors(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + + if ((cfi->cfiq->EraseRegionInfo[0] & 0xffff) == 0x003f) { + cfi->cfiq->EraseRegionInfo[0] |= 0x0040; + pr_warn("%s: Bad S29GL064N CFI data; adjust from 64 to 128 sectors\n", + mtd->name); + } +} + +static void fixup_s29gl032n_sectors(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + + if ((cfi->cfiq->EraseRegionInfo[1] & 0xffff) == 0x007e) { + cfi->cfiq->EraseRegionInfo[1] &= ~0x0040; + pr_warn("%s: Bad S29GL032N CFI data; adjust from 127 to 63 sectors\n", + mtd->name); + } +} + +static void fixup_s29ns512p_sectors(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + + /* + * S29NS512P flash uses more than 8bits to report number of sectors, + * which is not permitted by CFI. + */ + cfi->cfiq->EraseRegionInfo[0] = 0x020001ff; + pr_warn("%s: Bad S29NS512P CFI data; adjust to 512 sectors\n", + mtd->name); +} + +static void fixup_quirks(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + + if (cfi->mfr == CFI_MFR_AMD && cfi->id == 0x0c01) + cfi->quirks |= CFI_QUIRK_DQ_TRUE_DATA; +} + +/* Used to fix CFI-Tables of chips without Extended Query Tables */ +static struct cfi_fixup cfi_nopri_fixup_table[] = { + { CFI_MFR_SST, 0x234a, fixup_sst39vf }, /* SST39VF1602 */ + { CFI_MFR_SST, 0x234b, fixup_sst39vf }, /* SST39VF1601 */ + { CFI_MFR_SST, 0x235a, fixup_sst39vf }, /* SST39VF3202 */ + { CFI_MFR_SST, 0x235b, fixup_sst39vf }, /* SST39VF3201 */ + { CFI_MFR_SST, 0x235c, fixup_sst39vf_rev_b }, /* SST39VF3202B */ + { CFI_MFR_SST, 0x235d, fixup_sst39vf_rev_b }, /* SST39VF3201B */ + { CFI_MFR_SST, 0x236c, fixup_sst39vf_rev_b }, /* SST39VF6402B */ + { CFI_MFR_SST, 0x236d, fixup_sst39vf_rev_b }, /* SST39VF6401B */ + { 0, 0, NULL } +}; + +static struct cfi_fixup cfi_fixup_table[] = { + { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri }, +#ifdef AMD_BOOTLOC_BUG + { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock }, + { CFI_MFR_AMIC, CFI_ID_ANY, fixup_amd_bootblock }, + { CFI_MFR_MACRONIX, CFI_ID_ANY, fixup_amd_bootblock }, +#endif + { CFI_MFR_AMD, 0x0050, fixup_use_secsi }, + { CFI_MFR_AMD, 0x0053, fixup_use_secsi }, + { CFI_MFR_AMD, 0x0055, fixup_use_secsi }, + { CFI_MFR_AMD, 0x0056, fixup_use_secsi }, + { CFI_MFR_AMD, 0x005C, fixup_use_secsi }, + { CFI_MFR_AMD, 0x005F, fixup_use_secsi }, + { CFI_MFR_AMD, 0x0c01, fixup_s29gl064n_sectors }, + { CFI_MFR_AMD, 0x1301, fixup_s29gl064n_sectors }, + { CFI_MFR_AMD, 0x1a00, fixup_s29gl032n_sectors }, + { CFI_MFR_AMD, 0x1a01, fixup_s29gl032n_sectors }, + { CFI_MFR_AMD, 0x3f00, fixup_s29ns512p_sectors }, + { CFI_MFR_SST, 0x536a, fixup_sst38vf640x_sectorsize }, /* SST38VF6402 */ + { CFI_MFR_SST, 0x536b, fixup_sst38vf640x_sectorsize }, /* SST38VF6401 */ + { CFI_MFR_SST, 0x536c, fixup_sst38vf640x_sectorsize }, /* SST38VF6404 */ + { CFI_MFR_SST, 0x536d, fixup_sst38vf640x_sectorsize }, /* SST38VF6403 */ +#if !FORCE_WORD_WRITE + { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers }, +#endif + { CFI_MFR_ANY, CFI_ID_ANY, fixup_quirks }, + { 0, 0, NULL } +}; +static struct cfi_fixup jedec_fixup_table[] = { + { CFI_MFR_SST, SST49LF004B, fixup_use_fwh_lock }, + { CFI_MFR_SST, SST49LF040B, fixup_use_fwh_lock }, + { CFI_MFR_SST, SST49LF008A, fixup_use_fwh_lock }, + { 0, 0, NULL } +}; + +static struct cfi_fixup fixup_table[] = { + /* The CFI vendor ids and the JEDEC vendor IDs appear + * to be common. It is like the devices id's are as + * well. This table is to pick all cases where + * we know that is the case. + */ + { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip }, + { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock }, + { 0, 0, NULL } +}; + + +static void cfi_fixup_major_minor(struct cfi_private *cfi, + struct cfi_pri_amdstd *extp) +{ + if (cfi->mfr == CFI_MFR_SAMSUNG) { + if ((extp->MajorVersion == '0' && extp->MinorVersion == '0') || + (extp->MajorVersion == '3' && extp->MinorVersion == '3')) { + /* + * Samsung K8P2815UQB and K8D6x16UxM chips + * report major=0 / minor=0. + * K8D3x16UxC chips report major=3 / minor=3. + */ + printk(KERN_NOTICE " Fixing Samsung's Amd/Fujitsu" + " Extended Query version to 1.%c\n", + extp->MinorVersion); + extp->MajorVersion = '1'; + } + } + + /* + * SST 38VF640x chips report major=0xFF / minor=0xFF. + */ + if (cfi->mfr == CFI_MFR_SST && (cfi->id >> 4) == 0x0536) { + extp->MajorVersion = '1'; + extp->MinorVersion = '0'; + } +} + +static int is_m29ew(struct cfi_private *cfi) +{ + if (cfi->mfr == CFI_MFR_INTEL && + ((cfi->device_type == CFI_DEVICETYPE_X8 && (cfi->id & 0xff) == 0x7e) || + (cfi->device_type == CFI_DEVICETYPE_X16 && cfi->id == 0x227e))) + return 1; + return 0; +} + +/* + * From TN-13-07: Patching the Linux Kernel and U-Boot for M29 Flash, page 20: + * Some revisions of the M29EW suffer from erase suspend hang ups. In + * particular, it can occur when the sequence + * Erase Confirm -> Suspend -> Program -> Resume + * causes a lockup due to internal timing issues. The consequence is that the + * erase cannot be resumed without inserting a dummy command after programming + * and prior to resuming. [...] The work-around is to issue a dummy write cycle + * that writes an F0 command code before the RESUME command. + */ +static void cfi_fixup_m29ew_erase_suspend(struct map_info *map, + unsigned long adr) +{ + struct cfi_private *cfi = map->fldrv_priv; + /* before resume, insert a dummy 0xF0 cycle for Micron M29EW devices */ + if (is_m29ew(cfi)) + map_write(map, CMD(0xF0), adr); +} + +/* + * From TN-13-07: Patching the Linux Kernel and U-Boot for M29 Flash, page 22: + * + * Some revisions of the M29EW (for example, A1 and A2 step revisions) + * are affected by a problem that could cause a hang up when an ERASE SUSPEND + * command is issued after an ERASE RESUME operation without waiting for a + * minimum delay. The result is that once the ERASE seems to be completed + * (no bits are toggling), the contents of the Flash memory block on which + * the erase was ongoing could be inconsistent with the expected values + * (typically, the array value is stuck to the 0xC0, 0xC4, 0x80, or 0x84 + * values), causing a consequent failure of the ERASE operation. + * The occurrence of this issue could be high, especially when file system + * operations on the Flash are intensive. As a result, it is recommended + * that a patch be applied. Intensive file system operations can cause many + * calls to the garbage routine to free Flash space (also by erasing physical + * Flash blocks) and as a result, many consecutive SUSPEND and RESUME + * commands can occur. The problem disappears when a delay is inserted after + * the RESUME command by using the udelay() function available in Linux. + * The DELAY value must be tuned based on the customer's platform. + * The maximum value that fixes the problem in all cases is 500us. + * But, in our experience, a delay of 30 µs to 50 µs is sufficient + * in most cases. + * We have chosen 500µs because this latency is acceptable. + */ +static void cfi_fixup_m29ew_delay_after_resume(struct cfi_private *cfi) +{ + /* + * Resolving the Delay After Resume Issue see Micron TN-13-07 + * Worst case delay must be 500µs but 30-50µs should be ok as well + */ + if (is_m29ew(cfi)) + cfi_udelay(500); +} + +struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) +{ + struct cfi_private *cfi = map->fldrv_priv; + struct device_node __maybe_unused *np = map->device_node; + struct mtd_info *mtd; + int i; + + mtd = kzalloc(sizeof(*mtd), GFP_KERNEL); + if (!mtd) + return NULL; + mtd->priv = map; + mtd->type = MTD_NORFLASH; + + /* Fill in the default mtd operations */ + mtd->_erase = cfi_amdstd_erase_varsize; + mtd->_write = cfi_amdstd_write_words; + mtd->_read = cfi_amdstd_read; + mtd->_sync = cfi_amdstd_sync; + mtd->_suspend = cfi_amdstd_suspend; + mtd->_resume = cfi_amdstd_resume; + mtd->_read_user_prot_reg = cfi_amdstd_read_user_prot_reg; + mtd->_read_fact_prot_reg = cfi_amdstd_read_fact_prot_reg; + mtd->_get_fact_prot_info = cfi_amdstd_get_fact_prot_info; + mtd->_get_user_prot_info = cfi_amdstd_get_user_prot_info; + mtd->_write_user_prot_reg = cfi_amdstd_write_user_prot_reg; + mtd->_lock_user_prot_reg = cfi_amdstd_lock_user_prot_reg; + mtd->flags = MTD_CAP_NORFLASH; + mtd->name = map->name; + mtd->writesize = 1; + mtd->writebufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize; + + pr_debug("MTD %s(): write buffer size %d\n", __func__, + mtd->writebufsize); + + mtd->_panic_write = cfi_amdstd_panic_write; + mtd->reboot_notifier.notifier_call = cfi_amdstd_reboot; + + if (cfi->cfi_mode==CFI_MODE_CFI){ + unsigned char bootloc; + __u16 adr = primary?cfi->cfiq->P_ADR:cfi->cfiq->A_ADR; + struct cfi_pri_amdstd *extp; + + extp = (struct cfi_pri_amdstd*)cfi_read_pri(map, adr, sizeof(*extp), "Amd/Fujitsu"); + if (extp) { + /* + * It's a real CFI chip, not one for which the probe + * routine faked a CFI structure. + */ + cfi_fixup_major_minor(cfi, extp); + + /* + * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.4, 1.5 + * see: http://cs.ozerki.net/zap/pub/axim-x5/docs/cfi_r20.pdf, page 19 + * http://www.spansion.com/Support/AppNotes/cfi_100_20011201.pdf + * http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf + * http://www.spansion.com/Support/Datasheets/S29GL_128S_01GS_00_02_e.pdf + */ + if (extp->MajorVersion != '1' || + (extp->MajorVersion == '1' && (extp->MinorVersion < '0' || extp->MinorVersion > '5'))) { + printk(KERN_ERR " Unknown Amd/Fujitsu Extended Query " + "version %c.%c (%#02x/%#02x).\n", + extp->MajorVersion, extp->MinorVersion, + extp->MajorVersion, extp->MinorVersion); + kfree(extp); + kfree(mtd); + return NULL; + } + + printk(KERN_INFO " Amd/Fujitsu Extended Query version %c.%c.\n", + extp->MajorVersion, extp->MinorVersion); + + /* Install our own private info structure */ + cfi->cmdset_priv = extp; + + /* Apply cfi device specific fixups */ + cfi_fixup(mtd, cfi_fixup_table); + +#ifdef DEBUG_CFI_FEATURES + /* Tell the user about it in lots of lovely detail */ + cfi_tell_features(extp); +#endif + +#ifdef CONFIG_OF + if (np && of_property_read_bool( + np, "use-advanced-sector-protection") + && extp->BlkProtUnprot == 8) { + printk(KERN_INFO " Advanced Sector Protection (PPB Locking) supported\n"); + mtd->_lock = cfi_ppb_lock; + mtd->_unlock = cfi_ppb_unlock; + mtd->_is_locked = cfi_ppb_is_locked; + } +#endif + + bootloc = extp->TopBottom; + if ((bootloc < 2) || (bootloc > 5)) { + printk(KERN_WARNING "%s: CFI contains unrecognised boot " + "bank location (%d). Assuming bottom.\n", + map->name, bootloc); + bootloc = 2; + } + + if (bootloc == 3 && cfi->cfiq->NumEraseRegions > 1) { + printk(KERN_WARNING "%s: Swapping erase regions for top-boot CFI table.\n", map->name); + + for (i=0; i<cfi->cfiq->NumEraseRegions / 2; i++) { + int j = (cfi->cfiq->NumEraseRegions-1)-i; + + swap(cfi->cfiq->EraseRegionInfo[i], + cfi->cfiq->EraseRegionInfo[j]); + } + } + /* Set the default CFI lock/unlock addresses */ + cfi->addr_unlock1 = 0x555; + cfi->addr_unlock2 = 0x2aa; + } + cfi_fixup(mtd, cfi_nopri_fixup_table); + + if (!cfi->addr_unlock1 || !cfi->addr_unlock2) { + kfree(mtd); + return NULL; + } + + } /* CFI mode */ + else if (cfi->cfi_mode == CFI_MODE_JEDEC) { + /* Apply jedec specific fixups */ + cfi_fixup(mtd, jedec_fixup_table); + } + /* Apply generic fixups */ + cfi_fixup(mtd, fixup_table); + + for (i=0; i< cfi->numchips; i++) { + cfi->chips[i].word_write_time = 1<<cfi->cfiq->WordWriteTimeoutTyp; + cfi->chips[i].buffer_write_time = 1<<cfi->cfiq->BufWriteTimeoutTyp; + cfi->chips[i].erase_time = 1<<cfi->cfiq->BlockEraseTimeoutTyp; + /* + * First calculate the timeout max according to timeout field + * of struct cfi_ident that probed from chip's CFI aera, if + * available. Specify a minimum of 2000us, in case the CFI data + * is wrong. + */ + if (cfi->cfiq->BufWriteTimeoutTyp && + cfi->cfiq->BufWriteTimeoutMax) + cfi->chips[i].buffer_write_time_max = + 1 << (cfi->cfiq->BufWriteTimeoutTyp + + cfi->cfiq->BufWriteTimeoutMax); + else + cfi->chips[i].buffer_write_time_max = 0; + + cfi->chips[i].buffer_write_time_max = + max(cfi->chips[i].buffer_write_time_max, 2000); + + cfi->chips[i].ref_point_counter = 0; + init_waitqueue_head(&(cfi->chips[i].wq)); + } + + map->fldrv = &cfi_amdstd_chipdrv; + + return cfi_amdstd_setup(mtd); +} +struct mtd_info *cfi_cmdset_0006(struct map_info *map, int primary) __attribute__((alias("cfi_cmdset_0002"))); +struct mtd_info *cfi_cmdset_0701(struct map_info *map, int primary) __attribute__((alias("cfi_cmdset_0002"))); +EXPORT_SYMBOL_GPL(cfi_cmdset_0002); +EXPORT_SYMBOL_GPL(cfi_cmdset_0006); +EXPORT_SYMBOL_GPL(cfi_cmdset_0701); + +static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long devsize = (1<<cfi->cfiq->DevSize) * cfi->interleave; + unsigned long offset = 0; + int i,j; + + printk(KERN_NOTICE "number of %s chips: %d\n", + (cfi->cfi_mode == CFI_MODE_CFI)?"CFI":"JEDEC",cfi->numchips); + /* Select the correct geometry setup */ + mtd->size = devsize * cfi->numchips; + + mtd->numeraseregions = cfi->cfiq->NumEraseRegions * cfi->numchips; + mtd->eraseregions = kmalloc_array(mtd->numeraseregions, + sizeof(struct mtd_erase_region_info), + GFP_KERNEL); + if (!mtd->eraseregions) + goto setup_err; + + for (i=0; i<cfi->cfiq->NumEraseRegions; i++) { + unsigned long ernum, ersize; + ersize = ((cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff) * cfi->interleave; + ernum = (cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1; + + if (mtd->erasesize < ersize) { + mtd->erasesize = ersize; + } + for (j=0; j<cfi->numchips; j++) { + mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].offset = (j*devsize)+offset; + mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].erasesize = ersize; + mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].numblocks = ernum; + } + offset += (ersize * ernum); + } + if (offset != devsize) { + /* Argh */ + printk(KERN_WARNING "Sum of regions (%lx) != total size of set of interleaved chips (%lx)\n", offset, devsize); + goto setup_err; + } + + __module_get(THIS_MODULE); + register_reboot_notifier(&mtd->reboot_notifier); + return mtd; + + setup_err: + kfree(mtd->eraseregions); + kfree(mtd); + kfree(cfi->cmdset_priv); + return NULL; +} + +/* + * Return true if the chip is ready and has the correct value. + * + * Ready is one of: read mode, query mode, erase-suspend-read mode (in any + * non-suspended sector) and is indicated by no toggle bits toggling. + * + * Error are indicated by toggling bits or bits held with the wrong value, + * or with bits toggling. + * + * Note that anything more complicated than checking if no bits are toggling + * (including checking DQ5 for an error status) is tricky to get working + * correctly and is therefore not done (particularly with interleaved chips + * as each chip must be checked independently of the others). + */ +static int __xipram chip_ready(struct map_info *map, struct flchip *chip, + unsigned long addr, map_word *expected) +{ + struct cfi_private *cfi = map->fldrv_priv; + map_word d, t; + int ret; + + if (cfi_use_status_reg(cfi)) { + map_word ready = CMD(CFI_SR_DRB); + /* + * For chips that support status register, check device + * ready bit + */ + cfi_send_gen_cmd(0x70, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + t = map_read(map, addr); + + return map_word_andequal(map, t, ready, ready); + } + + d = map_read(map, addr); + t = map_read(map, addr); + + ret = map_word_equal(map, d, t); + + if (!ret || !expected) + return ret; + + return map_word_equal(map, t, *expected); +} + +static int __xipram chip_good(struct map_info *map, struct flchip *chip, + unsigned long addr, map_word *expected) +{ + struct cfi_private *cfi = map->fldrv_priv; + map_word *datum = expected; + + if (cfi->quirks & CFI_QUIRK_DQ_TRUE_DATA) + datum = NULL; + + return chip_ready(map, chip, addr, datum); +} + +static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr, int mode) +{ + DECLARE_WAITQUEUE(wait, current); + struct cfi_private *cfi = map->fldrv_priv; + unsigned long timeo; + struct cfi_pri_amdstd *cfip = (struct cfi_pri_amdstd *)cfi->cmdset_priv; + + resettime: + timeo = jiffies + HZ; + retry: + switch (chip->state) { + + case FL_STATUS: + for (;;) { + if (chip_ready(map, chip, adr, NULL)) + break; + + if (time_after(jiffies, timeo)) { + printk(KERN_ERR "Waiting for chip to be ready timed out.\n"); + return -EIO; + } + mutex_unlock(&chip->mutex); + cfi_udelay(1); + mutex_lock(&chip->mutex); + /* Someone else might have been playing with it. */ + goto retry; + } + + case FL_READY: + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + return 0; + + case FL_ERASING: + if (!cfip || !(cfip->EraseSuspend & (0x1|0x2)) || + !(mode == FL_READY || mode == FL_POINT || + (mode == FL_WRITING && (cfip->EraseSuspend & 0x2)))) + goto sleep; + + /* Do not allow suspend iff read/write to EB address */ + if ((adr & chip->in_progress_block_mask) == + chip->in_progress_block_addr) + goto sleep; + + /* Erase suspend */ + /* It's harmless to issue the Erase-Suspend and Erase-Resume + * commands when the erase algorithm isn't in progress. */ + map_write(map, CMD(0xB0), chip->in_progress_block_addr); + chip->oldstate = FL_ERASING; + chip->state = FL_ERASE_SUSPENDING; + chip->erase_suspended = 1; + for (;;) { + if (chip_ready(map, chip, adr, NULL)) + break; + + if (time_after(jiffies, timeo)) { + /* Should have suspended the erase by now. + * Send an Erase-Resume command as either + * there was an error (so leave the erase + * routine to recover from it) or we trying to + * use the erase-in-progress sector. */ + put_chip(map, chip, adr); + printk(KERN_ERR "MTD %s(): chip not ready after erase suspend\n", __func__); + return -EIO; + } + + mutex_unlock(&chip->mutex); + cfi_udelay(1); + mutex_lock(&chip->mutex); + /* Nobody will touch it while it's in state FL_ERASE_SUSPENDING. + So we can just loop here. */ + } + chip->state = FL_READY; + return 0; + + case FL_XIP_WHILE_ERASING: + if (mode != FL_READY && mode != FL_POINT && + (!cfip || !(cfip->EraseSuspend&2))) + goto sleep; + chip->oldstate = chip->state; + chip->state = FL_READY; + return 0; + + case FL_SHUTDOWN: + /* The machine is rebooting */ + return -EIO; + + case FL_POINT: + /* Only if there's no operation suspended... */ + if (mode == FL_READY && chip->oldstate == FL_READY) + return 0; + fallthrough; + default: + sleep: + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + mutex_unlock(&chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + mutex_lock(&chip->mutex); + goto resettime; + } +} + + +static void put_chip(struct map_info *map, struct flchip *chip, unsigned long adr) +{ + struct cfi_private *cfi = map->fldrv_priv; + + switch(chip->oldstate) { + case FL_ERASING: + cfi_fixup_m29ew_erase_suspend(map, + chip->in_progress_block_addr); + map_write(map, cfi->sector_erase_cmd, chip->in_progress_block_addr); + cfi_fixup_m29ew_delay_after_resume(cfi); + chip->oldstate = FL_READY; + chip->state = FL_ERASING; + break; + + case FL_XIP_WHILE_ERASING: + chip->state = chip->oldstate; + chip->oldstate = FL_READY; + break; + + case FL_READY: + case FL_STATUS: + break; + default: + printk(KERN_ERR "MTD: put_chip() called with oldstate %d!!\n", chip->oldstate); + } + wake_up(&chip->wq); +} + +#ifdef CONFIG_MTD_XIP + +/* + * No interrupt what so ever can be serviced while the flash isn't in array + * mode. This is ensured by the xip_disable() and xip_enable() functions + * enclosing any code path where the flash is known not to be in array mode. + * And within a XIP disabled code path, only functions marked with __xipram + * may be called and nothing else (it's a good thing to inspect generated + * assembly to make sure inline functions were actually inlined and that gcc + * didn't emit calls to its own support functions). Also configuring MTD CFI + * support to a single buswidth and a single interleave is also recommended. + */ + +static void xip_disable(struct map_info *map, struct flchip *chip, + unsigned long adr) +{ + /* TODO: chips with no XIP use should ignore and return */ + (void) map_read(map, adr); /* ensure mmu mapping is up to date */ + local_irq_disable(); +} + +static void __xipram xip_enable(struct map_info *map, struct flchip *chip, + unsigned long adr) +{ + struct cfi_private *cfi = map->fldrv_priv; + + if (chip->state != FL_POINT && chip->state != FL_READY) { + map_write(map, CMD(0xf0), adr); + chip->state = FL_READY; + } + (void) map_read(map, adr); + xip_iprefetch(); + local_irq_enable(); +} + +/* + * When a delay is required for the flash operation to complete, the + * xip_udelay() function is polling for both the given timeout and pending + * (but still masked) hardware interrupts. Whenever there is an interrupt + * pending then the flash erase operation is suspended, array mode restored + * and interrupts unmasked. Task scheduling might also happen at that + * point. The CPU eventually returns from the interrupt or the call to + * schedule() and the suspended flash operation is resumed for the remaining + * of the delay period. + * + * Warning: this function _will_ fool interrupt latency tracing tools. + */ + +static void __xipram xip_udelay(struct map_info *map, struct flchip *chip, + unsigned long adr, int usec) +{ + struct cfi_private *cfi = map->fldrv_priv; + struct cfi_pri_amdstd *extp = cfi->cmdset_priv; + map_word status, OK = CMD(0x80); + unsigned long suspended, start = xip_currtime(); + flstate_t oldstate; + + do { + cpu_relax(); + if (xip_irqpending() && extp && + ((chip->state == FL_ERASING && (extp->EraseSuspend & 2))) && + (cfi_interleave_is_1(cfi) || chip->oldstate == FL_READY)) { + /* + * Let's suspend the erase operation when supported. + * Note that we currently don't try to suspend + * interleaved chips if there is already another + * operation suspended (imagine what happens + * when one chip was already done with the current + * operation while another chip suspended it, then + * we resume the whole thing at once). Yes, it + * can happen! + */ + map_write(map, CMD(0xb0), adr); + usec -= xip_elapsed_since(start); + suspended = xip_currtime(); + do { + if (xip_elapsed_since(suspended) > 100000) { + /* + * The chip doesn't want to suspend + * after waiting for 100 msecs. + * This is a critical error but there + * is not much we can do here. + */ + return; + } + status = map_read(map, adr); + } while (!map_word_andequal(map, status, OK, OK)); + + /* Suspend succeeded */ + oldstate = chip->state; + if (!map_word_bitsset(map, status, CMD(0x40))) + break; + chip->state = FL_XIP_WHILE_ERASING; + chip->erase_suspended = 1; + map_write(map, CMD(0xf0), adr); + (void) map_read(map, adr); + xip_iprefetch(); + local_irq_enable(); + mutex_unlock(&chip->mutex); + xip_iprefetch(); + cond_resched(); + + /* + * We're back. However someone else might have + * decided to go write to the chip if we are in + * a suspended erase state. If so let's wait + * until it's done. + */ + mutex_lock(&chip->mutex); + while (chip->state != FL_XIP_WHILE_ERASING) { + DECLARE_WAITQUEUE(wait, current); + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + mutex_unlock(&chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + mutex_lock(&chip->mutex); + } + /* Disallow XIP again */ + local_irq_disable(); + + /* Correct Erase Suspend Hangups for M29EW */ + cfi_fixup_m29ew_erase_suspend(map, adr); + /* Resume the write or erase operation */ + map_write(map, cfi->sector_erase_cmd, adr); + chip->state = oldstate; + start = xip_currtime(); + } else if (usec >= 1000000/HZ) { + /* + * Try to save on CPU power when waiting delay + * is at least a system timer tick period. + * No need to be extremely accurate here. + */ + xip_cpu_idle(); + } + status = map_read(map, adr); + } while (!map_word_andequal(map, status, OK, OK) + && xip_elapsed_since(start) < usec); +} + +#define UDELAY(map, chip, adr, usec) xip_udelay(map, chip, adr, usec) + +/* + * The INVALIDATE_CACHED_RANGE() macro is normally used in parallel while + * the flash is actively programming or erasing since we have to poll for + * the operation to complete anyway. We can't do that in a generic way with + * a XIP setup so do it before the actual flash operation in this case + * and stub it out from INVALIDATE_CACHE_UDELAY. + */ +#define XIP_INVAL_CACHED_RANGE(map, from, size) \ + INVALIDATE_CACHED_RANGE(map, from, size) + +#define INVALIDATE_CACHE_UDELAY(map, chip, adr, len, usec) \ + UDELAY(map, chip, adr, usec) + +/* + * Extra notes: + * + * Activating this XIP support changes the way the code works a bit. For + * example the code to suspend the current process when concurrent access + * happens is never executed because xip_udelay() will always return with the + * same chip state as it was entered with. This is why there is no care for + * the presence of add_wait_queue() or schedule() calls from within a couple + * xip_disable()'d areas of code, like in do_erase_oneblock for example. + * The queueing and scheduling are always happening within xip_udelay(). + * + * Similarly, get_chip() and put_chip() just happen to always be executed + * with chip->state set to FL_READY (or FL_XIP_WHILE_*) where flash state + * is in array mode, therefore never executing many cases therein and not + * causing any problem with XIP. + */ + +#else + +#define xip_disable(map, chip, adr) +#define xip_enable(map, chip, adr) +#define XIP_INVAL_CACHED_RANGE(x...) + +#define UDELAY(map, chip, adr, usec) \ +do { \ + mutex_unlock(&chip->mutex); \ + cfi_udelay(usec); \ + mutex_lock(&chip->mutex); \ +} while (0) + +#define INVALIDATE_CACHE_UDELAY(map, chip, adr, len, usec) \ +do { \ + mutex_unlock(&chip->mutex); \ + INVALIDATE_CACHED_RANGE(map, adr, len); \ + cfi_udelay(usec); \ + mutex_lock(&chip->mutex); \ +} while (0) + +#endif + +static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf) +{ + unsigned long cmd_addr; + struct cfi_private *cfi = map->fldrv_priv; + int ret; + + adr += chip->start; + + /* Ensure cmd read/writes are aligned. */ + cmd_addr = adr & ~(map_bankwidth(map)-1); + + mutex_lock(&chip->mutex); + ret = get_chip(map, chip, cmd_addr, FL_READY); + if (ret) { + mutex_unlock(&chip->mutex); + return ret; + } + + if (chip->state != FL_POINT && chip->state != FL_READY) { + map_write(map, CMD(0xf0), cmd_addr); + chip->state = FL_READY; + } + + map_copy_from(map, buf, adr, len); + + put_chip(map, chip, cmd_addr); + + mutex_unlock(&chip->mutex); + return 0; +} + + +static int cfi_amdstd_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long ofs; + int chipnum; + int ret = 0; + + /* ofs: offset within the first chip that the first read should start */ + chipnum = (from >> cfi->chipshift); + ofs = from - (chipnum << cfi->chipshift); + + while (len) { + unsigned long thislen; + + if (chipnum >= cfi->numchips) + break; + + if ((len + ofs -1) >> cfi->chipshift) + thislen = (1<<cfi->chipshift) - ofs; + else + thislen = len; + + ret = do_read_onechip(map, &cfi->chips[chipnum], ofs, thislen, buf); + if (ret) + break; + + *retlen += thislen; + len -= thislen; + buf += thislen; + + ofs = 0; + chipnum++; + } + return ret; +} + +typedef int (*otp_op_t)(struct map_info *map, struct flchip *chip, + loff_t adr, size_t len, u_char *buf, size_t grouplen); + +static inline void otp_enter(struct map_info *map, struct flchip *chip, + loff_t adr, size_t len) +{ + struct cfi_private *cfi = map->fldrv_priv; + + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x88, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + + INVALIDATE_CACHED_RANGE(map, chip->start + adr, len); +} + +static inline void otp_exit(struct map_info *map, struct flchip *chip, + loff_t adr, size_t len) +{ + struct cfi_private *cfi = map->fldrv_priv; + + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x90, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x00, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + + INVALIDATE_CACHED_RANGE(map, chip->start + adr, len); +} + +static inline int do_read_secsi_onechip(struct map_info *map, + struct flchip *chip, loff_t adr, + size_t len, u_char *buf, + size_t grouplen) +{ + DECLARE_WAITQUEUE(wait, current); + + retry: + mutex_lock(&chip->mutex); + + if (chip->state != FL_READY){ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + + mutex_unlock(&chip->mutex); + + schedule(); + remove_wait_queue(&chip->wq, &wait); + + goto retry; + } + + adr += chip->start; + + chip->state = FL_READY; + + otp_enter(map, chip, adr, len); + map_copy_from(map, buf, adr, len); + otp_exit(map, chip, adr, len); + + wake_up(&chip->wq); + mutex_unlock(&chip->mutex); + + return 0; +} + +static int cfi_amdstd_secsi_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long ofs; + int chipnum; + int ret = 0; + + /* ofs: offset within the first chip that the first read should start */ + /* 8 secsi bytes per chip */ + chipnum=from>>3; + ofs=from & 7; + + while (len) { + unsigned long thislen; + + if (chipnum >= cfi->numchips) + break; + + if ((len + ofs -1) >> 3) + thislen = (1<<3) - ofs; + else + thislen = len; + + ret = do_read_secsi_onechip(map, &cfi->chips[chipnum], ofs, + thislen, buf, 0); + if (ret) + break; + + *retlen += thislen; + len -= thislen; + buf += thislen; + + ofs = 0; + chipnum++; + } + return ret; +} + +static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, + unsigned long adr, map_word datum, + int mode); + +static int do_otp_write(struct map_info *map, struct flchip *chip, loff_t adr, + size_t len, u_char *buf, size_t grouplen) +{ + int ret; + while (len) { + unsigned long bus_ofs = adr & ~(map_bankwidth(map)-1); + int gap = adr - bus_ofs; + int n = min_t(int, len, map_bankwidth(map) - gap); + map_word datum = map_word_ff(map); + + if (n != map_bankwidth(map)) { + /* partial write of a word, load old contents */ + otp_enter(map, chip, bus_ofs, map_bankwidth(map)); + datum = map_read(map, bus_ofs); + otp_exit(map, chip, bus_ofs, map_bankwidth(map)); + } + + datum = map_word_load_partial(map, datum, buf, gap, n); + ret = do_write_oneword(map, chip, bus_ofs, datum, FL_OTP_WRITE); + if (ret) + return ret; + + adr += n; + buf += n; + len -= n; + } + + return 0; +} + +static int do_otp_lock(struct map_info *map, struct flchip *chip, loff_t adr, + size_t len, u_char *buf, size_t grouplen) +{ + struct cfi_private *cfi = map->fldrv_priv; + uint8_t lockreg; + unsigned long timeo; + int ret; + + /* make sure area matches group boundaries */ + if ((adr != 0) || (len != grouplen)) + return -EINVAL; + + mutex_lock(&chip->mutex); + ret = get_chip(map, chip, chip->start, FL_LOCKING); + if (ret) { + mutex_unlock(&chip->mutex); + return ret; + } + chip->state = FL_LOCKING; + + /* Enter lock register command */ + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x40, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + + /* read lock register */ + lockreg = cfi_read_query(map, 0); + + /* set bit 0 to protect extended memory block */ + lockreg &= ~0x01; + + /* set bit 0 to protect extended memory block */ + /* write lock register */ + map_write(map, CMD(0xA0), chip->start); + map_write(map, CMD(lockreg), chip->start); + + /* wait for chip to become ready */ + timeo = jiffies + msecs_to_jiffies(2); + for (;;) { + if (chip_ready(map, chip, adr, NULL)) + break; + + if (time_after(jiffies, timeo)) { + pr_err("Waiting for chip to be ready timed out.\n"); + ret = -EIO; + break; + } + UDELAY(map, chip, 0, 1); + } + + /* exit protection commands */ + map_write(map, CMD(0x90), chip->start); + map_write(map, CMD(0x00), chip->start); + + chip->state = FL_READY; + put_chip(map, chip, chip->start); + mutex_unlock(&chip->mutex); + + return ret; +} + +static int cfi_amdstd_otp_walk(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf, + otp_op_t action, int user_regs) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int ofs_factor = cfi->interleave * cfi->device_type; + unsigned long base; + int chipnum; + struct flchip *chip; + uint8_t otp, lockreg; + int ret; + + size_t user_size, factory_size, otpsize; + loff_t user_offset, factory_offset, otpoffset; + int user_locked = 0, otplocked; + + *retlen = 0; + + for (chipnum = 0; chipnum < cfi->numchips; chipnum++) { + chip = &cfi->chips[chipnum]; + factory_size = 0; + user_size = 0; + + /* Micron M29EW family */ + if (is_m29ew(cfi)) { + base = chip->start; + + /* check whether secsi area is factory locked + or user lockable */ + mutex_lock(&chip->mutex); + ret = get_chip(map, chip, base, FL_CFI_QUERY); + if (ret) { + mutex_unlock(&chip->mutex); + return ret; + } + cfi_qry_mode_on(base, map, cfi); + otp = cfi_read_query(map, base + 0x3 * ofs_factor); + cfi_qry_mode_off(base, map, cfi); + put_chip(map, chip, base); + mutex_unlock(&chip->mutex); + + if (otp & 0x80) { + /* factory locked */ + factory_offset = 0; + factory_size = 0x100; + } else { + /* customer lockable */ + user_offset = 0; + user_size = 0x100; + + mutex_lock(&chip->mutex); + ret = get_chip(map, chip, base, FL_LOCKING); + if (ret) { + mutex_unlock(&chip->mutex); + return ret; + } + + /* Enter lock register command */ + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, + chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, + chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x40, cfi->addr_unlock1, + chip->start, map, cfi, + cfi->device_type, NULL); + /* read lock register */ + lockreg = cfi_read_query(map, 0); + /* exit protection commands */ + map_write(map, CMD(0x90), chip->start); + map_write(map, CMD(0x00), chip->start); + put_chip(map, chip, chip->start); + mutex_unlock(&chip->mutex); + + user_locked = ((lockreg & 0x01) == 0x00); + } + } + + otpsize = user_regs ? user_size : factory_size; + if (!otpsize) + continue; + otpoffset = user_regs ? user_offset : factory_offset; + otplocked = user_regs ? user_locked : 1; + + if (!action) { + /* return otpinfo */ + struct otp_info *otpinfo; + len -= sizeof(*otpinfo); + if (len <= 0) + return -ENOSPC; + otpinfo = (struct otp_info *)buf; + otpinfo->start = from; + otpinfo->length = otpsize; + otpinfo->locked = otplocked; + buf += sizeof(*otpinfo); + *retlen += sizeof(*otpinfo); + from += otpsize; + } else if ((from < otpsize) && (len > 0)) { + size_t size; + size = (len < otpsize - from) ? len : otpsize - from; + ret = action(map, chip, otpoffset + from, size, buf, + otpsize); + if (ret < 0) + return ret; + + buf += size; + len -= size; + *retlen += size; + from = 0; + } else { + from -= otpsize; + } + } + return 0; +} + +static int cfi_amdstd_get_fact_prot_info(struct mtd_info *mtd, size_t len, + size_t *retlen, struct otp_info *buf) +{ + return cfi_amdstd_otp_walk(mtd, 0, len, retlen, (u_char *)buf, + NULL, 0); +} + +static int cfi_amdstd_get_user_prot_info(struct mtd_info *mtd, size_t len, + size_t *retlen, struct otp_info *buf) +{ + return cfi_amdstd_otp_walk(mtd, 0, len, retlen, (u_char *)buf, + NULL, 1); +} + +static int cfi_amdstd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, + u_char *buf) +{ + return cfi_amdstd_otp_walk(mtd, from, len, retlen, + buf, do_read_secsi_onechip, 0); +} + +static int cfi_amdstd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, + u_char *buf) +{ + return cfi_amdstd_otp_walk(mtd, from, len, retlen, + buf, do_read_secsi_onechip, 1); +} + +static int cfi_amdstd_write_user_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len, size_t *retlen, + u_char *buf) +{ + return cfi_amdstd_otp_walk(mtd, from, len, retlen, buf, + do_otp_write, 1); +} + +static int cfi_amdstd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, + size_t len) +{ + size_t retlen; + return cfi_amdstd_otp_walk(mtd, from, len, &retlen, NULL, + do_otp_lock, 1); +} + +static int __xipram do_write_oneword_once(struct map_info *map, + struct flchip *chip, + unsigned long adr, map_word datum, + int mode, struct cfi_private *cfi) +{ + unsigned long timeo = jiffies + HZ; + /* + * We use a 1ms + 1 jiffies generic timeout for writes (most devices + * have a max write time of a few hundreds usec). However, we should + * use the maximum timeout value given by the chip at probe time + * instead. Unfortunately, struct flchip does have a field for + * maximum timeout, only for typical which can be far too short + * depending of the conditions. The ' + 1' is to avoid having a + * timeout of 0 jiffies if HZ is smaller than 1000. + */ + unsigned long uWriteTimeout = (HZ / 1000) + 1; + int ret = 0; + + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); + map_write(map, datum, adr); + chip->state = mode; + + INVALIDATE_CACHE_UDELAY(map, chip, + adr, map_bankwidth(map), + chip->word_write_time); + + /* See comment above for timeout value. */ + timeo = jiffies + uWriteTimeout; + for (;;) { + if (chip->state != mode) { + /* Someone's suspended the write. Sleep */ + DECLARE_WAITQUEUE(wait, current); + + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + mutex_unlock(&chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + (HZ / 2); /* FIXME */ + mutex_lock(&chip->mutex); + continue; + } + + /* + * We check "time_after" and "!chip_good" before checking + * "chip_good" to avoid the failure due to scheduling. + */ + if (time_after(jiffies, timeo) && + !chip_good(map, chip, adr, &datum)) { + xip_enable(map, chip, adr); + printk(KERN_WARNING "MTD %s(): software timeout\n", __func__); + xip_disable(map, chip, adr); + ret = -EIO; + break; + } + + if (chip_good(map, chip, adr, &datum)) { + if (cfi_check_err_status(map, chip, adr)) + ret = -EIO; + break; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + UDELAY(map, chip, adr, 1); + } + + return ret; +} + +static int __xipram do_write_oneword_start(struct map_info *map, + struct flchip *chip, + unsigned long adr, int mode) +{ + int ret; + + mutex_lock(&chip->mutex); + + ret = get_chip(map, chip, adr, mode); + if (ret) { + mutex_unlock(&chip->mutex); + return ret; + } + + if (mode == FL_OTP_WRITE) + otp_enter(map, chip, adr, map_bankwidth(map)); + + return ret; +} + +static void __xipram do_write_oneword_done(struct map_info *map, + struct flchip *chip, + unsigned long adr, int mode) +{ + if (mode == FL_OTP_WRITE) + otp_exit(map, chip, adr, map_bankwidth(map)); + + chip->state = FL_READY; + DISABLE_VPP(map); + put_chip(map, chip, adr); + + mutex_unlock(&chip->mutex); +} + +static int __xipram do_write_oneword_retry(struct map_info *map, + struct flchip *chip, + unsigned long adr, map_word datum, + int mode) +{ + struct cfi_private *cfi = map->fldrv_priv; + int ret = 0; + map_word oldd; + int retry_cnt = 0; + + /* + * Check for a NOP for the case when the datum to write is already + * present - it saves time and works around buggy chips that corrupt + * data at other locations when 0xff is written to a location that + * already contains 0xff. + */ + oldd = map_read(map, adr); + if (map_word_equal(map, oldd, datum)) { + pr_debug("MTD %s(): NOP\n", __func__); + return ret; + } + + XIP_INVAL_CACHED_RANGE(map, adr, map_bankwidth(map)); + ENABLE_VPP(map); + xip_disable(map, chip, adr); + + retry: + ret = do_write_oneword_once(map, chip, adr, datum, mode, cfi); + if (ret) { + /* reset on all failures. */ + map_write(map, CMD(0xF0), chip->start); + /* FIXME - should have reset delay before continuing */ + + if (++retry_cnt <= MAX_RETRIES) { + ret = 0; + goto retry; + } + } + xip_enable(map, chip, adr); + + return ret; +} + +static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, + unsigned long adr, map_word datum, + int mode) +{ + int ret; + + adr += chip->start; + + pr_debug("MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n", __func__, adr, + datum.x[0]); + + ret = do_write_oneword_start(map, chip, adr, mode); + if (ret) + return ret; + + ret = do_write_oneword_retry(map, chip, adr, datum, mode); + + do_write_oneword_done(map, chip, adr, mode); + + return ret; +} + + +static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int ret; + int chipnum; + unsigned long ofs, chipstart; + DECLARE_WAITQUEUE(wait, current); + + chipnum = to >> cfi->chipshift; + ofs = to - (chipnum << cfi->chipshift); + chipstart = cfi->chips[chipnum].start; + + /* If it's not bus-aligned, do the first byte write */ + if (ofs & (map_bankwidth(map)-1)) { + unsigned long bus_ofs = ofs & ~(map_bankwidth(map)-1); + int i = ofs - bus_ofs; + int n = 0; + map_word tmp_buf; + + retry: + mutex_lock(&cfi->chips[chipnum].mutex); + + if (cfi->chips[chipnum].state != FL_READY) { + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&cfi->chips[chipnum].wq, &wait); + + mutex_unlock(&cfi->chips[chipnum].mutex); + + schedule(); + remove_wait_queue(&cfi->chips[chipnum].wq, &wait); + goto retry; + } + + /* Load 'tmp_buf' with old contents of flash */ + tmp_buf = map_read(map, bus_ofs+chipstart); + + mutex_unlock(&cfi->chips[chipnum].mutex); + + /* Number of bytes to copy from buffer */ + n = min_t(int, len, map_bankwidth(map)-i); + + tmp_buf = map_word_load_partial(map, tmp_buf, buf, i, n); + + ret = do_write_oneword(map, &cfi->chips[chipnum], + bus_ofs, tmp_buf, FL_WRITING); + if (ret) + return ret; + + ofs += n; + buf += n; + (*retlen) += n; + len -= n; + + if (ofs >> cfi->chipshift) { + chipnum ++; + ofs = 0; + if (chipnum == cfi->numchips) + return 0; + } + } + + /* We are now aligned, write as much as possible */ + while(len >= map_bankwidth(map)) { + map_word datum; + + datum = map_word_load(map, buf); + + ret = do_write_oneword(map, &cfi->chips[chipnum], + ofs, datum, FL_WRITING); + if (ret) + return ret; + + ofs += map_bankwidth(map); + buf += map_bankwidth(map); + (*retlen) += map_bankwidth(map); + len -= map_bankwidth(map); + + if (ofs >> cfi->chipshift) { + chipnum ++; + ofs = 0; + if (chipnum == cfi->numchips) + return 0; + chipstart = cfi->chips[chipnum].start; + } + } + + /* Write the trailing bytes if any */ + if (len & (map_bankwidth(map)-1)) { + map_word tmp_buf; + + retry1: + mutex_lock(&cfi->chips[chipnum].mutex); + + if (cfi->chips[chipnum].state != FL_READY) { + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&cfi->chips[chipnum].wq, &wait); + + mutex_unlock(&cfi->chips[chipnum].mutex); + + schedule(); + remove_wait_queue(&cfi->chips[chipnum].wq, &wait); + goto retry1; + } + + tmp_buf = map_read(map, ofs + chipstart); + + mutex_unlock(&cfi->chips[chipnum].mutex); + + tmp_buf = map_word_load_partial(map, tmp_buf, buf, 0, len); + + ret = do_write_oneword(map, &cfi->chips[chipnum], + ofs, tmp_buf, FL_WRITING); + if (ret) + return ret; + + (*retlen) += len; + } + + return 0; +} + +#if !FORCE_WORD_WRITE +static int __xipram do_write_buffer_wait(struct map_info *map, + struct flchip *chip, unsigned long adr, + map_word datum) +{ + unsigned long timeo; + unsigned long u_write_timeout; + int ret = 0; + + /* + * Timeout is calculated according to CFI data, if available. + * See more comments in cfi_cmdset_0002(). + */ + u_write_timeout = usecs_to_jiffies(chip->buffer_write_time_max); + timeo = jiffies + u_write_timeout; + + for (;;) { + if (chip->state != FL_WRITING) { + /* Someone's suspended the write. Sleep */ + DECLARE_WAITQUEUE(wait, current); + + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + mutex_unlock(&chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + (HZ / 2); /* FIXME */ + mutex_lock(&chip->mutex); + continue; + } + + /* + * We check "time_after" and "!chip_good" before checking + * "chip_good" to avoid the failure due to scheduling. + */ + if (time_after(jiffies, timeo) && + !chip_good(map, chip, adr, &datum)) { + pr_err("MTD %s(): software timeout, address:0x%.8lx.\n", + __func__, adr); + ret = -EIO; + break; + } + + if (chip_good(map, chip, adr, &datum)) { + if (cfi_check_err_status(map, chip, adr)) + ret = -EIO; + break; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + UDELAY(map, chip, adr, 1); + } + + return ret; +} + +static void __xipram do_write_buffer_reset(struct map_info *map, + struct flchip *chip, + struct cfi_private *cfi) +{ + /* + * Recovery from write-buffer programming failures requires + * the write-to-buffer-reset sequence. Since the last part + * of the sequence also works as a normal reset, we can run + * the same commands regardless of why we are here. + * See e.g. + * http://www.spansion.com/Support/Application%20Notes/MirrorBit_Write_Buffer_Prog_Page_Buffer_Read_AN.pdf + */ + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0xF0, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + + /* FIXME - should have reset delay before continuing */ +} + +/* + * FIXME: interleaved mode not tested, and probably not supported! + */ +static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, + unsigned long adr, const u_char *buf, + int len) +{ + struct cfi_private *cfi = map->fldrv_priv; + int ret; + unsigned long cmd_adr; + int z, words; + map_word datum; + + adr += chip->start; + cmd_adr = adr; + + mutex_lock(&chip->mutex); + ret = get_chip(map, chip, adr, FL_WRITING); + if (ret) { + mutex_unlock(&chip->mutex); + return ret; + } + + datum = map_word_load(map, buf); + + pr_debug("MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n", + __func__, adr, datum.x[0]); + + XIP_INVAL_CACHED_RANGE(map, adr, len); + ENABLE_VPP(map); + xip_disable(map, chip, cmd_adr); + + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); + + /* Write Buffer Load */ + map_write(map, CMD(0x25), cmd_adr); + + chip->state = FL_WRITING_TO_BUFFER; + + /* Write length of data to come */ + words = len / map_bankwidth(map); + map_write(map, CMD(words - 1), cmd_adr); + /* Write data */ + z = 0; + while(z < words * map_bankwidth(map)) { + datum = map_word_load(map, buf); + map_write(map, datum, adr + z); + + z += map_bankwidth(map); + buf += map_bankwidth(map); + } + z -= map_bankwidth(map); + + adr += z; + + /* Write Buffer Program Confirm: GO GO GO */ + map_write(map, CMD(0x29), cmd_adr); + chip->state = FL_WRITING; + + INVALIDATE_CACHE_UDELAY(map, chip, + adr, map_bankwidth(map), + chip->word_write_time); + + ret = do_write_buffer_wait(map, chip, adr, datum); + if (ret) + do_write_buffer_reset(map, chip, cfi); + + xip_enable(map, chip, adr); + + chip->state = FL_READY; + DISABLE_VPP(map); + put_chip(map, chip, adr); + mutex_unlock(&chip->mutex); + + return ret; +} + + +static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int wbufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize; + int ret; + int chipnum; + unsigned long ofs; + + chipnum = to >> cfi->chipshift; + ofs = to - (chipnum << cfi->chipshift); + + /* If it's not bus-aligned, do the first word write */ + if (ofs & (map_bankwidth(map)-1)) { + size_t local_len = (-ofs)&(map_bankwidth(map)-1); + if (local_len > len) + local_len = len; + ret = cfi_amdstd_write_words(mtd, ofs + (chipnum<<cfi->chipshift), + local_len, retlen, buf); + if (ret) + return ret; + ofs += local_len; + buf += local_len; + len -= local_len; + + if (ofs >> cfi->chipshift) { + chipnum ++; + ofs = 0; + if (chipnum == cfi->numchips) + return 0; + } + } + + /* Write buffer is worth it only if more than one word to write... */ + while (len >= map_bankwidth(map) * 2) { + /* We must not cross write block boundaries */ + int size = wbufsize - (ofs & (wbufsize-1)); + + if (size > len) + size = len; + if (size % map_bankwidth(map)) + size -= size % map_bankwidth(map); + + ret = do_write_buffer(map, &cfi->chips[chipnum], + ofs, buf, size); + if (ret) + return ret; + + ofs += size; + buf += size; + (*retlen) += size; + len -= size; + + if (ofs >> cfi->chipshift) { + chipnum ++; + ofs = 0; + if (chipnum == cfi->numchips) + return 0; + } + } + + if (len) { + size_t retlen_dregs = 0; + + ret = cfi_amdstd_write_words(mtd, ofs + (chipnum<<cfi->chipshift), + len, &retlen_dregs, buf); + + *retlen += retlen_dregs; + return ret; + } + + return 0; +} +#endif /* !FORCE_WORD_WRITE */ + +/* + * Wait for the flash chip to become ready to write data + * + * This is only called during the panic_write() path. When panic_write() + * is called, the kernel is in the process of a panic, and will soon be + * dead. Therefore we don't take any locks, and attempt to get access + * to the chip as soon as possible. + */ +static int cfi_amdstd_panic_wait(struct map_info *map, struct flchip *chip, + unsigned long adr) +{ + struct cfi_private *cfi = map->fldrv_priv; + int retries = 10; + int i; + + /* + * If the driver thinks the chip is idle, and no toggle bits + * are changing, then the chip is actually idle for sure. + */ + if (chip->state == FL_READY && chip_ready(map, chip, adr, NULL)) + return 0; + + /* + * Try several times to reset the chip and then wait for it + * to become idle. The upper limit of a few milliseconds of + * delay isn't a big problem: the kernel is dying anyway. It + * is more important to save the messages. + */ + while (retries > 0) { + const unsigned long timeo = (HZ / 1000) + 1; + + /* send the reset command */ + map_write(map, CMD(0xF0), chip->start); + + /* wait for the chip to become ready */ + for (i = 0; i < jiffies_to_usecs(timeo); i++) { + if (chip_ready(map, chip, adr, NULL)) + return 0; + + udelay(1); + } + + retries--; + } + + /* the chip never became ready */ + return -EBUSY; +} + +/* + * Write out one word of data to a single flash chip during a kernel panic + * + * This is only called during the panic_write() path. When panic_write() + * is called, the kernel is in the process of a panic, and will soon be + * dead. Therefore we don't take any locks, and attempt to get access + * to the chip as soon as possible. + * + * The implementation of this routine is intentionally similar to + * do_write_oneword(), in order to ease code maintenance. + */ +static int do_panic_write_oneword(struct map_info *map, struct flchip *chip, + unsigned long adr, map_word datum) +{ + const unsigned long uWriteTimeout = (HZ / 1000) + 1; + struct cfi_private *cfi = map->fldrv_priv; + int retry_cnt = 0; + map_word oldd; + int ret; + int i; + + adr += chip->start; + + ret = cfi_amdstd_panic_wait(map, chip, adr); + if (ret) + return ret; + + pr_debug("MTD %s(): PANIC WRITE 0x%.8lx(0x%.8lx)\n", + __func__, adr, datum.x[0]); + + /* + * Check for a NOP for the case when the datum to write is already + * present - it saves time and works around buggy chips that corrupt + * data at other locations when 0xff is written to a location that + * already contains 0xff. + */ + oldd = map_read(map, adr); + if (map_word_equal(map, oldd, datum)) { + pr_debug("MTD %s(): NOP\n", __func__); + goto op_done; + } + + ENABLE_VPP(map); + +retry: + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); + map_write(map, datum, adr); + + for (i = 0; i < jiffies_to_usecs(uWriteTimeout); i++) { + if (chip_ready(map, chip, adr, NULL)) + break; + + udelay(1); + } + + if (!chip_ready(map, chip, adr, &datum) || + cfi_check_err_status(map, chip, adr)) { + /* reset on all failures. */ + map_write(map, CMD(0xF0), chip->start); + /* FIXME - should have reset delay before continuing */ + + if (++retry_cnt <= MAX_RETRIES) + goto retry; + + ret = -EIO; + } + +op_done: + DISABLE_VPP(map); + return ret; +} + +/* + * Write out some data during a kernel panic + * + * This is used by the mtdoops driver to save the dying messages from a + * kernel which has panic'd. + * + * This routine ignores all of the locking used throughout the rest of the + * driver, in order to ensure that the data gets written out no matter what + * state this driver (and the flash chip itself) was in when the kernel crashed. + * + * The implementation of this routine is intentionally similar to + * cfi_amdstd_write_words(), in order to ease code maintenance. + */ +static int cfi_amdstd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long ofs, chipstart; + int ret; + int chipnum; + + chipnum = to >> cfi->chipshift; + ofs = to - (chipnum << cfi->chipshift); + chipstart = cfi->chips[chipnum].start; + + /* If it's not bus aligned, do the first byte write */ + if (ofs & (map_bankwidth(map) - 1)) { + unsigned long bus_ofs = ofs & ~(map_bankwidth(map) - 1); + int i = ofs - bus_ofs; + int n = 0; + map_word tmp_buf; + + ret = cfi_amdstd_panic_wait(map, &cfi->chips[chipnum], bus_ofs); + if (ret) + return ret; + + /* Load 'tmp_buf' with old contents of flash */ + tmp_buf = map_read(map, bus_ofs + chipstart); + + /* Number of bytes to copy from buffer */ + n = min_t(int, len, map_bankwidth(map) - i); + + tmp_buf = map_word_load_partial(map, tmp_buf, buf, i, n); + + ret = do_panic_write_oneword(map, &cfi->chips[chipnum], + bus_ofs, tmp_buf); + if (ret) + return ret; + + ofs += n; + buf += n; + (*retlen) += n; + len -= n; + + if (ofs >> cfi->chipshift) { + chipnum++; + ofs = 0; + if (chipnum == cfi->numchips) + return 0; + } + } + + /* We are now aligned, write as much as possible */ + while (len >= map_bankwidth(map)) { + map_word datum; + + datum = map_word_load(map, buf); + + ret = do_panic_write_oneword(map, &cfi->chips[chipnum], + ofs, datum); + if (ret) + return ret; + + ofs += map_bankwidth(map); + buf += map_bankwidth(map); + (*retlen) += map_bankwidth(map); + len -= map_bankwidth(map); + + if (ofs >> cfi->chipshift) { + chipnum++; + ofs = 0; + if (chipnum == cfi->numchips) + return 0; + + chipstart = cfi->chips[chipnum].start; + } + } + + /* Write the trailing bytes if any */ + if (len & (map_bankwidth(map) - 1)) { + map_word tmp_buf; + + ret = cfi_amdstd_panic_wait(map, &cfi->chips[chipnum], ofs); + if (ret) + return ret; + + tmp_buf = map_read(map, ofs + chipstart); + + tmp_buf = map_word_load_partial(map, tmp_buf, buf, 0, len); + + ret = do_panic_write_oneword(map, &cfi->chips[chipnum], + ofs, tmp_buf); + if (ret) + return ret; + + (*retlen) += len; + } + + return 0; +} + + +/* + * Handle devices with one erase region, that only implement + * the chip erase command. + */ +static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip) +{ + struct cfi_private *cfi = map->fldrv_priv; + unsigned long timeo = jiffies + HZ; + unsigned long int adr; + DECLARE_WAITQUEUE(wait, current); + int ret; + int retry_cnt = 0; + map_word datum = map_word_ff(map); + + adr = cfi->addr_unlock1; + + mutex_lock(&chip->mutex); + ret = get_chip(map, chip, adr, FL_ERASING); + if (ret) { + mutex_unlock(&chip->mutex); + return ret; + } + + pr_debug("MTD %s(): ERASE 0x%.8lx\n", + __func__, chip->start); + + XIP_INVAL_CACHED_RANGE(map, adr, map->size); + ENABLE_VPP(map); + xip_disable(map, chip, adr); + + retry: + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x10, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); + + chip->state = FL_ERASING; + chip->erase_suspended = 0; + chip->in_progress_block_addr = adr; + chip->in_progress_block_mask = ~(map->size - 1); + + INVALIDATE_CACHE_UDELAY(map, chip, + adr, map->size, + chip->erase_time*500); + + timeo = jiffies + (HZ*20); + + for (;;) { + if (chip->state != FL_ERASING) { + /* Someone's suspended the erase. Sleep */ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + mutex_unlock(&chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + mutex_lock(&chip->mutex); + continue; + } + if (chip->erase_suspended) { + /* This erase was suspended and resumed. + Adjust the timeout */ + timeo = jiffies + (HZ*20); /* FIXME */ + chip->erase_suspended = 0; + } + + if (chip_ready(map, chip, adr, &datum)) { + if (cfi_check_err_status(map, chip, adr)) + ret = -EIO; + break; + } + + if (time_after(jiffies, timeo)) { + printk(KERN_WARNING "MTD %s(): software timeout\n", + __func__); + ret = -EIO; + break; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + UDELAY(map, chip, adr, 1000000/HZ); + } + /* Did we succeed? */ + if (ret) { + /* reset on all failures. */ + map_write(map, CMD(0xF0), chip->start); + /* FIXME - should have reset delay before continuing */ + + if (++retry_cnt <= MAX_RETRIES) { + ret = 0; + goto retry; + } + } + + chip->state = FL_READY; + xip_enable(map, chip, adr); + DISABLE_VPP(map); + put_chip(map, chip, adr); + mutex_unlock(&chip->mutex); + + return ret; +} + + +static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr, int len, void *thunk) +{ + struct cfi_private *cfi = map->fldrv_priv; + unsigned long timeo = jiffies + HZ; + DECLARE_WAITQUEUE(wait, current); + int ret; + int retry_cnt = 0; + map_word datum = map_word_ff(map); + + adr += chip->start; + + mutex_lock(&chip->mutex); + ret = get_chip(map, chip, adr, FL_ERASING); + if (ret) { + mutex_unlock(&chip->mutex); + return ret; + } + + pr_debug("MTD %s(): ERASE 0x%.8lx\n", + __func__, adr); + + XIP_INVAL_CACHED_RANGE(map, adr, len); + ENABLE_VPP(map); + xip_disable(map, chip, adr); + + retry: + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); + map_write(map, cfi->sector_erase_cmd, adr); + + chip->state = FL_ERASING; + chip->erase_suspended = 0; + chip->in_progress_block_addr = adr; + chip->in_progress_block_mask = ~(len - 1); + + INVALIDATE_CACHE_UDELAY(map, chip, + adr, len, + chip->erase_time*500); + + timeo = jiffies + (HZ*20); + + for (;;) { + if (chip->state != FL_ERASING) { + /* Someone's suspended the erase. Sleep */ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + mutex_unlock(&chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + mutex_lock(&chip->mutex); + continue; + } + if (chip->erase_suspended) { + /* This erase was suspended and resumed. + Adjust the timeout */ + timeo = jiffies + (HZ*20); /* FIXME */ + chip->erase_suspended = 0; + } + + if (chip_ready(map, chip, adr, &datum)) { + if (cfi_check_err_status(map, chip, adr)) + ret = -EIO; + break; + } + + if (time_after(jiffies, timeo)) { + printk(KERN_WARNING "MTD %s(): software timeout\n", + __func__); + ret = -EIO; + break; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + UDELAY(map, chip, adr, 1000000/HZ); + } + /* Did we succeed? */ + if (ret) { + /* reset on all failures. */ + map_write(map, CMD(0xF0), chip->start); + /* FIXME - should have reset delay before continuing */ + + if (++retry_cnt <= MAX_RETRIES) { + ret = 0; + goto retry; + } + } + + chip->state = FL_READY; + xip_enable(map, chip, adr); + DISABLE_VPP(map); + put_chip(map, chip, adr); + mutex_unlock(&chip->mutex); + return ret; +} + + +static int cfi_amdstd_erase_varsize(struct mtd_info *mtd, struct erase_info *instr) +{ + return cfi_varsize_frob(mtd, do_erase_oneblock, instr->addr, + instr->len, NULL); +} + + +static int cfi_amdstd_erase_chip(struct mtd_info *mtd, struct erase_info *instr) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + + if (instr->addr != 0) + return -EINVAL; + + if (instr->len != mtd->size) + return -EINVAL; + + return do_erase_chip(map, &cfi->chips[0]); +} + +static int do_atmel_lock(struct map_info *map, struct flchip *chip, + unsigned long adr, int len, void *thunk) +{ + struct cfi_private *cfi = map->fldrv_priv; + int ret; + + mutex_lock(&chip->mutex); + ret = get_chip(map, chip, adr + chip->start, FL_LOCKING); + if (ret) + goto out_unlock; + chip->state = FL_LOCKING; + + pr_debug("MTD %s(): LOCK 0x%08lx len %d\n", __func__, adr, len); + + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, + cfi->device_type, NULL); + map_write(map, CMD(0x40), chip->start + adr); + + chip->state = FL_READY; + put_chip(map, chip, adr + chip->start); + ret = 0; + +out_unlock: + mutex_unlock(&chip->mutex); + return ret; +} + +static int do_atmel_unlock(struct map_info *map, struct flchip *chip, + unsigned long adr, int len, void *thunk) +{ + struct cfi_private *cfi = map->fldrv_priv; + int ret; + + mutex_lock(&chip->mutex); + ret = get_chip(map, chip, adr + chip->start, FL_UNLOCKING); + if (ret) + goto out_unlock; + chip->state = FL_UNLOCKING; + + pr_debug("MTD %s(): LOCK 0x%08lx len %d\n", __func__, adr, len); + + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + map_write(map, CMD(0x70), adr); + + chip->state = FL_READY; + put_chip(map, chip, adr + chip->start); + ret = 0; + +out_unlock: + mutex_unlock(&chip->mutex); + return ret; +} + +static int cfi_atmel_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + return cfi_varsize_frob(mtd, do_atmel_lock, ofs, len, NULL); +} + +static int cfi_atmel_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + return cfi_varsize_frob(mtd, do_atmel_unlock, ofs, len, NULL); +} + +/* + * Advanced Sector Protection - PPB (Persistent Protection Bit) locking + */ + +struct ppb_lock { + struct flchip *chip; + unsigned long adr; + int locked; +}; + +#define DO_XXLOCK_ONEBLOCK_LOCK ((void *)1) +#define DO_XXLOCK_ONEBLOCK_UNLOCK ((void *)2) +#define DO_XXLOCK_ONEBLOCK_GETLOCK ((void *)3) + +static int __maybe_unused do_ppb_xxlock(struct map_info *map, + struct flchip *chip, + unsigned long adr, int len, void *thunk) +{ + struct cfi_private *cfi = map->fldrv_priv; + unsigned long timeo; + int ret; + + adr += chip->start; + mutex_lock(&chip->mutex); + ret = get_chip(map, chip, adr, FL_LOCKING); + if (ret) { + mutex_unlock(&chip->mutex); + return ret; + } + + pr_debug("MTD %s(): XXLOCK 0x%08lx len %d\n", __func__, adr, len); + + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, + cfi->device_type, NULL); + /* PPB entry command */ + cfi_send_gen_cmd(0xC0, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + + if (thunk == DO_XXLOCK_ONEBLOCK_LOCK) { + chip->state = FL_LOCKING; + map_write(map, CMD(0xA0), adr); + map_write(map, CMD(0x00), adr); + } else if (thunk == DO_XXLOCK_ONEBLOCK_UNLOCK) { + /* + * Unlocking of one specific sector is not supported, so we + * have to unlock all sectors of this device instead + */ + chip->state = FL_UNLOCKING; + map_write(map, CMD(0x80), chip->start); + map_write(map, CMD(0x30), chip->start); + } else if (thunk == DO_XXLOCK_ONEBLOCK_GETLOCK) { + chip->state = FL_JEDEC_QUERY; + /* Return locked status: 0->locked, 1->unlocked */ + ret = !cfi_read_query(map, adr); + } else + BUG(); + + /* + * Wait for some time as unlocking of all sectors takes quite long + */ + timeo = jiffies + msecs_to_jiffies(2000); /* 2s max (un)locking */ + for (;;) { + if (chip_ready(map, chip, adr, NULL)) + break; + + if (time_after(jiffies, timeo)) { + printk(KERN_ERR "Waiting for chip to be ready timed out.\n"); + ret = -EIO; + break; + } + + UDELAY(map, chip, adr, 1); + } + + /* Exit BC commands */ + map_write(map, CMD(0x90), chip->start); + map_write(map, CMD(0x00), chip->start); + + chip->state = FL_READY; + put_chip(map, chip, adr); + mutex_unlock(&chip->mutex); + + return ret; +} + +static int __maybe_unused cfi_ppb_lock(struct mtd_info *mtd, loff_t ofs, + uint64_t len) +{ + return cfi_varsize_frob(mtd, do_ppb_xxlock, ofs, len, + DO_XXLOCK_ONEBLOCK_LOCK); +} + +static int __maybe_unused cfi_ppb_unlock(struct mtd_info *mtd, loff_t ofs, + uint64_t len) +{ + struct mtd_erase_region_info *regions = mtd->eraseregions; + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + struct ppb_lock *sect; + unsigned long adr; + loff_t offset; + uint64_t length; + int chipnum; + int i; + int sectors; + int ret; + int max_sectors; + + /* + * PPB unlocking always unlocks all sectors of the flash chip. + * We need to re-lock all previously locked sectors. So lets + * first check the locking status of all sectors and save + * it for future use. + */ + max_sectors = 0; + for (i = 0; i < mtd->numeraseregions; i++) + max_sectors += regions[i].numblocks; + + sect = kcalloc(max_sectors, sizeof(struct ppb_lock), GFP_KERNEL); + if (!sect) + return -ENOMEM; + + /* + * This code to walk all sectors is a slightly modified version + * of the cfi_varsize_frob() code. + */ + i = 0; + chipnum = 0; + adr = 0; + sectors = 0; + offset = 0; + length = mtd->size; + + while (length) { + int size = regions[i].erasesize; + + /* + * Only test sectors that shall not be unlocked. The other + * sectors shall be unlocked, so lets keep their locking + * status at "unlocked" (locked=0) for the final re-locking. + */ + if ((offset < ofs) || (offset >= (ofs + len))) { + sect[sectors].chip = &cfi->chips[chipnum]; + sect[sectors].adr = adr; + sect[sectors].locked = do_ppb_xxlock( + map, &cfi->chips[chipnum], adr, 0, + DO_XXLOCK_ONEBLOCK_GETLOCK); + } + + adr += size; + offset += size; + length -= size; + + if (offset == regions[i].offset + size * regions[i].numblocks) + i++; + + if (adr >> cfi->chipshift) { + if (offset >= (ofs + len)) + break; + adr = 0; + chipnum++; + + if (chipnum >= cfi->numchips) + break; + } + + sectors++; + if (sectors >= max_sectors) { + printk(KERN_ERR "Only %d sectors for PPB locking supported!\n", + max_sectors); + kfree(sect); + return -EINVAL; + } + } + + /* Now unlock the whole chip */ + ret = cfi_varsize_frob(mtd, do_ppb_xxlock, ofs, len, + DO_XXLOCK_ONEBLOCK_UNLOCK); + if (ret) { + kfree(sect); + return ret; + } + + /* + * PPB unlocking always unlocks all sectors of the flash chip. + * We need to re-lock all previously locked sectors. + */ + for (i = 0; i < sectors; i++) { + if (sect[i].locked) + do_ppb_xxlock(map, sect[i].chip, sect[i].adr, 0, + DO_XXLOCK_ONEBLOCK_LOCK); + } + + kfree(sect); + return ret; +} + +static int __maybe_unused cfi_ppb_is_locked(struct mtd_info *mtd, loff_t ofs, + uint64_t len) +{ + return cfi_varsize_frob(mtd, do_ppb_xxlock, ofs, len, + DO_XXLOCK_ONEBLOCK_GETLOCK) ? 1 : 0; +} + +static void cfi_amdstd_sync (struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int i; + struct flchip *chip; + int ret = 0; + DECLARE_WAITQUEUE(wait, current); + + for (i=0; !ret && i<cfi->numchips; i++) { + chip = &cfi->chips[i]; + + retry: + mutex_lock(&chip->mutex); + + switch(chip->state) { + case FL_READY: + case FL_STATUS: + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + chip->oldstate = chip->state; + chip->state = FL_SYNCING; + /* No need to wake_up() on this state change - + * as the whole point is that nobody can do anything + * with the chip now anyway. + */ + fallthrough; + case FL_SYNCING: + mutex_unlock(&chip->mutex); + break; + + default: + /* Not an idle state */ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + + mutex_unlock(&chip->mutex); + + schedule(); + + remove_wait_queue(&chip->wq, &wait); + + goto retry; + } + } + + /* Unlock the chips again */ + + for (i--; i >=0; i--) { + chip = &cfi->chips[i]; + + mutex_lock(&chip->mutex); + + if (chip->state == FL_SYNCING) { + chip->state = chip->oldstate; + wake_up(&chip->wq); + } + mutex_unlock(&chip->mutex); + } +} + + +static int cfi_amdstd_suspend(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int i; + struct flchip *chip; + int ret = 0; + + for (i=0; !ret && i<cfi->numchips; i++) { + chip = &cfi->chips[i]; + + mutex_lock(&chip->mutex); + + switch(chip->state) { + case FL_READY: + case FL_STATUS: + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + chip->oldstate = chip->state; + chip->state = FL_PM_SUSPENDED; + /* No need to wake_up() on this state change - + * as the whole point is that nobody can do anything + * with the chip now anyway. + */ + case FL_PM_SUSPENDED: + break; + + default: + ret = -EAGAIN; + break; + } + mutex_unlock(&chip->mutex); + } + + /* Unlock the chips again */ + + if (ret) { + for (i--; i >=0; i--) { + chip = &cfi->chips[i]; + + mutex_lock(&chip->mutex); + + if (chip->state == FL_PM_SUSPENDED) { + chip->state = chip->oldstate; + wake_up(&chip->wq); + } + mutex_unlock(&chip->mutex); + } + } + + return ret; +} + + +static void cfi_amdstd_resume(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int i; + struct flchip *chip; + + for (i=0; i<cfi->numchips; i++) { + + chip = &cfi->chips[i]; + + mutex_lock(&chip->mutex); + + if (chip->state == FL_PM_SUSPENDED) { + chip->state = FL_READY; + map_write(map, CMD(0xF0), chip->start); + wake_up(&chip->wq); + } + else + printk(KERN_ERR "Argh. Chip not in PM_SUSPENDED state upon resume()\n"); + + mutex_unlock(&chip->mutex); + } +} + + +/* + * Ensure that the flash device is put back into read array mode before + * unloading the driver or rebooting. On some systems, rebooting while + * the flash is in query/program/erase mode will prevent the CPU from + * fetching the bootloader code, requiring a hard reset or power cycle. + */ +static int cfi_amdstd_reset(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int i, ret; + struct flchip *chip; + + for (i = 0; i < cfi->numchips; i++) { + + chip = &cfi->chips[i]; + + mutex_lock(&chip->mutex); + + ret = get_chip(map, chip, chip->start, FL_SHUTDOWN); + if (!ret) { + map_write(map, CMD(0xF0), chip->start); + chip->state = FL_SHUTDOWN; + put_chip(map, chip, chip->start); + } + + mutex_unlock(&chip->mutex); + } + + return 0; +} + + +static int cfi_amdstd_reboot(struct notifier_block *nb, unsigned long val, + void *v) +{ + struct mtd_info *mtd; + + mtd = container_of(nb, struct mtd_info, reboot_notifier); + cfi_amdstd_reset(mtd); + return NOTIFY_DONE; +} + + +static void cfi_amdstd_destroy(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + + cfi_amdstd_reset(mtd); + unregister_reboot_notifier(&mtd->reboot_notifier); + kfree(cfi->cmdset_priv); + kfree(cfi->cfiq); + kfree(cfi); + kfree(mtd->eraseregions); +} + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Crossnet Co. <info@crossnet.co.jp> et al."); +MODULE_DESCRIPTION("MTD chip driver for AMD/Fujitsu flash chips"); +MODULE_ALIAS("cfi_cmdset_0006"); +MODULE_ALIAS("cfi_cmdset_0701"); diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c new file mode 100644 index 000000000..270322bca --- /dev/null +++ b/drivers/mtd/chips/cfi_cmdset_0020.c @@ -0,0 +1,1399 @@ +/* + * Common Flash Interface support: + * ST Advanced Architecture Command Set (ID 0x0020) + * + * (C) 2000 Red Hat. GPL'd + * + * 10/10/2000 Nicolas Pitre <nico@fluxnic.net> + * - completely revamped method functions so they are aware and + * independent of the flash geometry (buswidth, interleave, etc.) + * - scalability vs code size is completely set at compile-time + * (see include/linux/mtd/cfi.h for selection) + * - optimized write buffer method + * 06/21/2002 Joern Engel <joern@wh.fh-wedel.de> and others + * - modified Intel Command Set 0x0001 to support ST Advanced Architecture + * (command set 0x0020) + * - added a writev function + * 07/13/2005 Joern Engel <joern@wh.fh-wedel.de> + * - Plugged memory leak in cfi_staa_writev(). + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <asm/io.h> +#include <asm/byteorder.h> + +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/mtd/map.h> +#include <linux/mtd/cfi.h> +#include <linux/mtd/mtd.h> + + +static int cfi_staa_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *); +static int cfi_staa_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); +static int cfi_staa_writev(struct mtd_info *mtd, const struct kvec *vecs, + unsigned long count, loff_t to, size_t *retlen); +static int cfi_staa_erase_varsize(struct mtd_info *, struct erase_info *); +static void cfi_staa_sync (struct mtd_info *); +static int cfi_staa_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +static int cfi_staa_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); +static int cfi_staa_suspend (struct mtd_info *); +static void cfi_staa_resume (struct mtd_info *); + +static void cfi_staa_destroy(struct mtd_info *); + +struct mtd_info *cfi_cmdset_0020(struct map_info *, int); + +static struct mtd_info *cfi_staa_setup (struct map_info *); + +static struct mtd_chip_driver cfi_staa_chipdrv = { + .probe = NULL, /* Not usable directly */ + .destroy = cfi_staa_destroy, + .name = "cfi_cmdset_0020", + .module = THIS_MODULE +}; + +/* #define DEBUG_LOCK_BITS */ +//#define DEBUG_CFI_FEATURES + +#ifdef DEBUG_CFI_FEATURES +static void cfi_tell_features(struct cfi_pri_intelext *extp) +{ + int i; + printk(" Feature/Command Support: %4.4X\n", extp->FeatureSupport); + printk(" - Chip Erase: %s\n", extp->FeatureSupport&1?"supported":"unsupported"); + printk(" - Suspend Erase: %s\n", extp->FeatureSupport&2?"supported":"unsupported"); + printk(" - Suspend Program: %s\n", extp->FeatureSupport&4?"supported":"unsupported"); + printk(" - Legacy Lock/Unlock: %s\n", extp->FeatureSupport&8?"supported":"unsupported"); + printk(" - Queued Erase: %s\n", extp->FeatureSupport&16?"supported":"unsupported"); + printk(" - Instant block lock: %s\n", extp->FeatureSupport&32?"supported":"unsupported"); + printk(" - Protection Bits: %s\n", extp->FeatureSupport&64?"supported":"unsupported"); + printk(" - Page-mode read: %s\n", extp->FeatureSupport&128?"supported":"unsupported"); + printk(" - Synchronous read: %s\n", extp->FeatureSupport&256?"supported":"unsupported"); + for (i=9; i<32; i++) { + if (extp->FeatureSupport & (1<<i)) + printk(" - Unknown Bit %X: supported\n", i); + } + + printk(" Supported functions after Suspend: %2.2X\n", extp->SuspendCmdSupport); + printk(" - Program after Erase Suspend: %s\n", extp->SuspendCmdSupport&1?"supported":"unsupported"); + for (i=1; i<8; i++) { + if (extp->SuspendCmdSupport & (1<<i)) + printk(" - Unknown Bit %X: supported\n", i); + } + + printk(" Block Status Register Mask: %4.4X\n", extp->BlkStatusRegMask); + printk(" - Lock Bit Active: %s\n", extp->BlkStatusRegMask&1?"yes":"no"); + printk(" - Valid Bit Active: %s\n", extp->BlkStatusRegMask&2?"yes":"no"); + for (i=2; i<16; i++) { + if (extp->BlkStatusRegMask & (1<<i)) + printk(" - Unknown Bit %X Active: yes\n",i); + } + + printk(" Vcc Logic Supply Optimum Program/Erase Voltage: %d.%d V\n", + extp->VccOptimal >> 8, extp->VccOptimal & 0xf); + if (extp->VppOptimal) + printk(" Vpp Programming Supply Optimum Program/Erase Voltage: %d.%d V\n", + extp->VppOptimal >> 8, extp->VppOptimal & 0xf); +} +#endif + +/* This routine is made available to other mtd code via + * inter_module_register. It must only be accessed through + * inter_module_get which will bump the use count of this module. The + * addresses passed back in cfi are valid as long as the use count of + * this module is non-zero, i.e. between inter_module_get and + * inter_module_put. Keith Owens <kaos@ocs.com.au> 29 Oct 2000. + */ +struct mtd_info *cfi_cmdset_0020(struct map_info *map, int primary) +{ + struct cfi_private *cfi = map->fldrv_priv; + int i; + + if (cfi->cfi_mode) { + /* + * It's a real CFI chip, not one for which the probe + * routine faked a CFI structure. So we read the feature + * table from it. + */ + __u16 adr = primary?cfi->cfiq->P_ADR:cfi->cfiq->A_ADR; + struct cfi_pri_intelext *extp; + + extp = (struct cfi_pri_intelext*)cfi_read_pri(map, adr, sizeof(*extp), "ST Microelectronics"); + if (!extp) + return NULL; + + if (extp->MajorVersion != '1' || + (extp->MinorVersion < '0' || extp->MinorVersion > '3')) { + printk(KERN_ERR " Unknown ST Microelectronics" + " Extended Query version %c.%c.\n", + extp->MajorVersion, extp->MinorVersion); + kfree(extp); + return NULL; + } + + /* Do some byteswapping if necessary */ + extp->FeatureSupport = cfi32_to_cpu(map, extp->FeatureSupport); + extp->BlkStatusRegMask = cfi32_to_cpu(map, + extp->BlkStatusRegMask); + +#ifdef DEBUG_CFI_FEATURES + /* Tell the user about it in lots of lovely detail */ + cfi_tell_features(extp); +#endif + + /* Install our own private info structure */ + cfi->cmdset_priv = extp; + } + + for (i=0; i< cfi->numchips; i++) { + cfi->chips[i].word_write_time = 128; + cfi->chips[i].buffer_write_time = 128; + cfi->chips[i].erase_time = 1024; + cfi->chips[i].ref_point_counter = 0; + init_waitqueue_head(&(cfi->chips[i].wq)); + } + + return cfi_staa_setup(map); +} +EXPORT_SYMBOL_GPL(cfi_cmdset_0020); + +static struct mtd_info *cfi_staa_setup(struct map_info *map) +{ + struct cfi_private *cfi = map->fldrv_priv; + struct mtd_info *mtd; + unsigned long offset = 0; + int i,j; + unsigned long devsize = (1<<cfi->cfiq->DevSize) * cfi->interleave; + + mtd = kzalloc(sizeof(*mtd), GFP_KERNEL); + //printk(KERN_DEBUG "number of CFI chips: %d\n", cfi->numchips); + + if (!mtd) { + kfree(cfi->cmdset_priv); + return NULL; + } + + mtd->priv = map; + mtd->type = MTD_NORFLASH; + mtd->size = devsize * cfi->numchips; + + mtd->numeraseregions = cfi->cfiq->NumEraseRegions * cfi->numchips; + mtd->eraseregions = kmalloc_array(mtd->numeraseregions, + sizeof(struct mtd_erase_region_info), + GFP_KERNEL); + if (!mtd->eraseregions) { + kfree(cfi->cmdset_priv); + kfree(mtd); + return NULL; + } + + for (i=0; i<cfi->cfiq->NumEraseRegions; i++) { + unsigned long ernum, ersize; + ersize = ((cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff) * cfi->interleave; + ernum = (cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1; + + if (mtd->erasesize < ersize) { + mtd->erasesize = ersize; + } + for (j=0; j<cfi->numchips; j++) { + mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].offset = (j*devsize)+offset; + mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].erasesize = ersize; + mtd->eraseregions[(j*cfi->cfiq->NumEraseRegions)+i].numblocks = ernum; + } + offset += (ersize * ernum); + } + + if (offset != devsize) { + /* Argh */ + printk(KERN_WARNING "Sum of regions (%lx) != total size of set of interleaved chips (%lx)\n", offset, devsize); + kfree(mtd->eraseregions); + kfree(cfi->cmdset_priv); + kfree(mtd); + return NULL; + } + + for (i=0; i<mtd->numeraseregions;i++){ + printk(KERN_DEBUG "%d: offset=0x%llx,size=0x%x,blocks=%d\n", + i, (unsigned long long)mtd->eraseregions[i].offset, + mtd->eraseregions[i].erasesize, + mtd->eraseregions[i].numblocks); + } + + /* Also select the correct geometry setup too */ + mtd->_erase = cfi_staa_erase_varsize; + mtd->_read = cfi_staa_read; + mtd->_write = cfi_staa_write_buffers; + mtd->_writev = cfi_staa_writev; + mtd->_sync = cfi_staa_sync; + mtd->_lock = cfi_staa_lock; + mtd->_unlock = cfi_staa_unlock; + mtd->_suspend = cfi_staa_suspend; + mtd->_resume = cfi_staa_resume; + mtd->flags = MTD_CAP_NORFLASH & ~MTD_BIT_WRITEABLE; + mtd->writesize = 8; /* FIXME: Should be 0 for STMicro flashes w/out ECC */ + mtd->writebufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize; + map->fldrv = &cfi_staa_chipdrv; + __module_get(THIS_MODULE); + mtd->name = map->name; + return mtd; +} + + +static inline int do_read_onechip(struct map_info *map, struct flchip *chip, loff_t adr, size_t len, u_char *buf) +{ + map_word status, status_OK; + unsigned long timeo; + DECLARE_WAITQUEUE(wait, current); + int suspended = 0; + unsigned long cmd_addr; + struct cfi_private *cfi = map->fldrv_priv; + + adr += chip->start; + + /* Ensure cmd read/writes are aligned. */ + cmd_addr = adr & ~(map_bankwidth(map)-1); + + /* Let's determine this according to the interleave only once */ + status_OK = CMD(0x80); + + timeo = jiffies + HZ; + retry: + mutex_lock(&chip->mutex); + + /* Check that the chip's ready to talk to us. + * If it's in FL_ERASING state, suspend it and make it talk now. + */ + switch (chip->state) { + case FL_ERASING: + if (!(((struct cfi_pri_intelext *)cfi->cmdset_priv)->FeatureSupport & 2)) + goto sleep; /* We don't support erase suspend */ + + map_write (map, CMD(0xb0), cmd_addr); + /* If the flash has finished erasing, then 'erase suspend' + * appears to make some (28F320) flash devices switch to + * 'read' mode. Make sure that we switch to 'read status' + * mode so we get the right data. --rmk + */ + map_write(map, CMD(0x70), cmd_addr); + chip->oldstate = FL_ERASING; + chip->state = FL_ERASE_SUSPENDING; + // printk("Erase suspending at 0x%lx\n", cmd_addr); + for (;;) { + status = map_read(map, cmd_addr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + if (time_after(jiffies, timeo)) { + /* Urgh */ + map_write(map, CMD(0xd0), cmd_addr); + /* make sure we're in 'read status' mode */ + map_write(map, CMD(0x70), cmd_addr); + chip->state = FL_ERASING; + wake_up(&chip->wq); + mutex_unlock(&chip->mutex); + printk(KERN_ERR "Chip not ready after erase " + "suspended: status = 0x%lx\n", status.x[0]); + return -EIO; + } + + mutex_unlock(&chip->mutex); + cfi_udelay(1); + mutex_lock(&chip->mutex); + } + + suspended = 1; + map_write(map, CMD(0xff), cmd_addr); + chip->state = FL_READY; + break; + +#if 0 + case FL_WRITING: + /* Not quite yet */ +#endif + + case FL_READY: + break; + + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + map_write(map, CMD(0x70), cmd_addr); + chip->state = FL_STATUS; + fallthrough; + case FL_STATUS: + status = map_read(map, cmd_addr); + if (map_word_andequal(map, status, status_OK, status_OK)) { + map_write(map, CMD(0xff), cmd_addr); + chip->state = FL_READY; + break; + } + + /* Urgh. Chip not yet ready to talk to us. */ + if (time_after(jiffies, timeo)) { + mutex_unlock(&chip->mutex); + printk(KERN_ERR "waiting for chip to be ready timed out in read. WSM status = %lx\n", status.x[0]); + return -EIO; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + mutex_unlock(&chip->mutex); + cfi_udelay(1); + goto retry; + + default: + sleep: + /* Stick ourselves on a wait queue to be woken when + someone changes the status */ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + mutex_unlock(&chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + HZ; + goto retry; + } + + map_copy_from(map, buf, adr, len); + + if (suspended) { + chip->state = chip->oldstate; + /* What if one interleaved chip has finished and the + other hasn't? The old code would leave the finished + one in READY mode. That's bad, and caused -EROFS + errors to be returned from do_erase_oneblock because + that's the only bit it checked for at the time. + As the state machine appears to explicitly allow + sending the 0x70 (Read Status) command to an erasing + chip and expecting it to be ignored, that's what we + do. */ + map_write(map, CMD(0xd0), cmd_addr); + map_write(map, CMD(0x70), cmd_addr); + } + + wake_up(&chip->wq); + mutex_unlock(&chip->mutex); + return 0; +} + +static int cfi_staa_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long ofs; + int chipnum; + int ret = 0; + + /* ofs: offset within the first chip that the first read should start */ + chipnum = (from >> cfi->chipshift); + ofs = from - (chipnum << cfi->chipshift); + + while (len) { + unsigned long thislen; + + if (chipnum >= cfi->numchips) + break; + + if ((len + ofs -1) >> cfi->chipshift) + thislen = (1<<cfi->chipshift) - ofs; + else + thislen = len; + + ret = do_read_onechip(map, &cfi->chips[chipnum], ofs, thislen, buf); + if (ret) + break; + + *retlen += thislen; + len -= thislen; + buf += thislen; + + ofs = 0; + chipnum++; + } + return ret; +} + +static int do_write_buffer(struct map_info *map, struct flchip *chip, + unsigned long adr, const u_char *buf, int len) +{ + struct cfi_private *cfi = map->fldrv_priv; + map_word status, status_OK; + unsigned long cmd_adr, timeo; + DECLARE_WAITQUEUE(wait, current); + int wbufsize, z; + + /* M58LW064A requires bus alignment for buffer wriets -- saw */ + if (adr & (map_bankwidth(map)-1)) + return -EINVAL; + + wbufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize; + adr += chip->start; + cmd_adr = adr & ~(wbufsize-1); + + /* Let's determine this according to the interleave only once */ + status_OK = CMD(0x80); + + timeo = jiffies + HZ; + retry: + +#ifdef DEBUG_CFI_FEATURES + printk("%s: chip->state[%d]\n", __func__, chip->state); +#endif + mutex_lock(&chip->mutex); + + /* Check that the chip's ready to talk to us. + * Later, we can actually think about interrupting it + * if it's in FL_ERASING state. + * Not just yet, though. + */ + switch (chip->state) { + case FL_READY: + break; + + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + map_write(map, CMD(0x70), cmd_adr); + chip->state = FL_STATUS; +#ifdef DEBUG_CFI_FEATURES + printk("%s: 1 status[%x]\n", __func__, map_read(map, cmd_adr)); +#endif + fallthrough; + case FL_STATUS: + status = map_read(map, cmd_adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + /* Urgh. Chip not yet ready to talk to us. */ + if (time_after(jiffies, timeo)) { + mutex_unlock(&chip->mutex); + printk(KERN_ERR "waiting for chip to be ready timed out in buffer write Xstatus = %lx, status = %lx\n", + status.x[0], map_read(map, cmd_adr).x[0]); + return -EIO; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + mutex_unlock(&chip->mutex); + cfi_udelay(1); + goto retry; + + default: + /* Stick ourselves on a wait queue to be woken when + someone changes the status */ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + mutex_unlock(&chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + HZ; + goto retry; + } + + ENABLE_VPP(map); + map_write(map, CMD(0xe8), cmd_adr); + chip->state = FL_WRITING_TO_BUFFER; + + z = 0; + for (;;) { + status = map_read(map, cmd_adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + mutex_unlock(&chip->mutex); + cfi_udelay(1); + mutex_lock(&chip->mutex); + + if (++z > 100) { + /* Argh. Not ready for write to buffer */ + DISABLE_VPP(map); + map_write(map, CMD(0x70), cmd_adr); + chip->state = FL_STATUS; + mutex_unlock(&chip->mutex); + printk(KERN_ERR "Chip not ready for buffer write. Xstatus = %lx\n", status.x[0]); + return -EIO; + } + } + + /* Write length of data to come */ + map_write(map, CMD(len/map_bankwidth(map)-1), cmd_adr ); + + /* Write data */ + for (z = 0; z < len; + z += map_bankwidth(map), buf += map_bankwidth(map)) { + map_word d; + d = map_word_load(map, buf); + map_write(map, d, adr+z); + } + /* GO GO GO */ + map_write(map, CMD(0xd0), cmd_adr); + chip->state = FL_WRITING; + + mutex_unlock(&chip->mutex); + cfi_udelay(chip->buffer_write_time); + mutex_lock(&chip->mutex); + + timeo = jiffies + (HZ/2); + z = 0; + for (;;) { + if (chip->state != FL_WRITING) { + /* Someone's suspended the write. Sleep */ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + mutex_unlock(&chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + (HZ / 2); /* FIXME */ + mutex_lock(&chip->mutex); + continue; + } + + status = map_read(map, cmd_adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + /* OK Still waiting */ + if (time_after(jiffies, timeo)) { + /* clear status */ + map_write(map, CMD(0x50), cmd_adr); + /* put back into read status register mode */ + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + DISABLE_VPP(map); + mutex_unlock(&chip->mutex); + printk(KERN_ERR "waiting for chip to be ready timed out in bufwrite\n"); + return -EIO; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + mutex_unlock(&chip->mutex); + cfi_udelay(1); + z++; + mutex_lock(&chip->mutex); + } + if (!z) { + chip->buffer_write_time--; + if (!chip->buffer_write_time) + chip->buffer_write_time++; + } + if (z > 1) + chip->buffer_write_time++; + + /* Done and happy. */ + DISABLE_VPP(map); + chip->state = FL_STATUS; + + /* check for errors: 'lock bit', 'VPP', 'dead cell'/'unerased cell' or 'incorrect cmd' -- saw */ + if (map_word_bitsset(map, status, CMD(0x3a))) { +#ifdef DEBUG_CFI_FEATURES + printk("%s: 2 status[%lx]\n", __func__, status.x[0]); +#endif + /* clear status */ + map_write(map, CMD(0x50), cmd_adr); + /* put back into read status register mode */ + map_write(map, CMD(0x70), adr); + wake_up(&chip->wq); + mutex_unlock(&chip->mutex); + return map_word_bitsset(map, status, CMD(0x02)) ? -EROFS : -EIO; + } + wake_up(&chip->wq); + mutex_unlock(&chip->mutex); + + return 0; +} + +static int cfi_staa_write_buffers (struct mtd_info *mtd, loff_t to, + size_t len, size_t *retlen, const u_char *buf) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int wbufsize = cfi_interleave(cfi) << cfi->cfiq->MaxBufWriteSize; + int ret; + int chipnum; + unsigned long ofs; + + chipnum = to >> cfi->chipshift; + ofs = to - (chipnum << cfi->chipshift); + +#ifdef DEBUG_CFI_FEATURES + printk("%s: map_bankwidth(map)[%x]\n", __func__, map_bankwidth(map)); + printk("%s: chipnum[%x] wbufsize[%x]\n", __func__, chipnum, wbufsize); + printk("%s: ofs[%x] len[%x]\n", __func__, ofs, len); +#endif + + /* Write buffer is worth it only if more than one word to write... */ + while (len > 0) { + /* We must not cross write block boundaries */ + int size = wbufsize - (ofs & (wbufsize-1)); + + if (size > len) + size = len; + + ret = do_write_buffer(map, &cfi->chips[chipnum], + ofs, buf, size); + if (ret) + return ret; + + ofs += size; + buf += size; + (*retlen) += size; + len -= size; + + if (ofs >> cfi->chipshift) { + chipnum ++; + ofs = 0; + if (chipnum == cfi->numchips) + return 0; + } + } + + return 0; +} + +/* + * Writev for ECC-Flashes is a little more complicated. We need to maintain + * a small buffer for this. + * XXX: If the buffer size is not a multiple of 2, this will break + */ +#define ECCBUF_SIZE (mtd->writesize) +#define ECCBUF_DIV(x) ((x) & ~(ECCBUF_SIZE - 1)) +#define ECCBUF_MOD(x) ((x) & (ECCBUF_SIZE - 1)) +static int +cfi_staa_writev(struct mtd_info *mtd, const struct kvec *vecs, + unsigned long count, loff_t to, size_t *retlen) +{ + unsigned long i; + size_t totlen = 0, thislen; + int ret = 0; + size_t buflen = 0; + char *buffer; + + if (!ECCBUF_SIZE) { + /* We should fall back to a general writev implementation. + * Until that is written, just break. + */ + return -EIO; + } + buffer = kmalloc(ECCBUF_SIZE, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + for (i=0; i<count; i++) { + size_t elem_len = vecs[i].iov_len; + void *elem_base = vecs[i].iov_base; + if (!elem_len) /* FIXME: Might be unnecessary. Check that */ + continue; + if (buflen) { /* cut off head */ + if (buflen + elem_len < ECCBUF_SIZE) { /* just accumulate */ + memcpy(buffer+buflen, elem_base, elem_len); + buflen += elem_len; + continue; + } + memcpy(buffer+buflen, elem_base, ECCBUF_SIZE-buflen); + ret = mtd_write(mtd, to, ECCBUF_SIZE, &thislen, + buffer); + totlen += thislen; + if (ret || thislen != ECCBUF_SIZE) + goto write_error; + elem_len -= thislen-buflen; + elem_base += thislen-buflen; + to += ECCBUF_SIZE; + } + if (ECCBUF_DIV(elem_len)) { /* write clean aligned data */ + ret = mtd_write(mtd, to, ECCBUF_DIV(elem_len), + &thislen, elem_base); + totlen += thislen; + if (ret || thislen != ECCBUF_DIV(elem_len)) + goto write_error; + to += thislen; + } + buflen = ECCBUF_MOD(elem_len); /* cut off tail */ + if (buflen) { + memset(buffer, 0xff, ECCBUF_SIZE); + memcpy(buffer, elem_base + thislen, buflen); + } + } + if (buflen) { /* flush last page, even if not full */ + /* This is sometimes intended behaviour, really */ + ret = mtd_write(mtd, to, buflen, &thislen, buffer); + totlen += thislen; + if (ret || thislen != ECCBUF_SIZE) + goto write_error; + } +write_error: + if (retlen) + *retlen = totlen; + kfree(buffer); + return ret; +} + + +static inline int do_erase_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr) +{ + struct cfi_private *cfi = map->fldrv_priv; + map_word status, status_OK; + unsigned long timeo; + int retries = 3; + DECLARE_WAITQUEUE(wait, current); + int ret = 0; + + adr += chip->start; + + /* Let's determine this according to the interleave only once */ + status_OK = CMD(0x80); + + timeo = jiffies + HZ; +retry: + mutex_lock(&chip->mutex); + + /* Check that the chip's ready to talk to us. */ + switch (chip->state) { + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + case FL_READY: + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + fallthrough; + case FL_STATUS: + status = map_read(map, adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + /* Urgh. Chip not yet ready to talk to us. */ + if (time_after(jiffies, timeo)) { + mutex_unlock(&chip->mutex); + printk(KERN_ERR "waiting for chip to be ready timed out in erase\n"); + return -EIO; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + mutex_unlock(&chip->mutex); + cfi_udelay(1); + goto retry; + + default: + /* Stick ourselves on a wait queue to be woken when + someone changes the status */ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + mutex_unlock(&chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + HZ; + goto retry; + } + + ENABLE_VPP(map); + /* Clear the status register first */ + map_write(map, CMD(0x50), adr); + + /* Now erase */ + map_write(map, CMD(0x20), adr); + map_write(map, CMD(0xD0), adr); + chip->state = FL_ERASING; + + mutex_unlock(&chip->mutex); + msleep(1000); + mutex_lock(&chip->mutex); + + /* FIXME. Use a timer to check this, and return immediately. */ + /* Once the state machine's known to be working I'll do that */ + + timeo = jiffies + (HZ*20); + for (;;) { + if (chip->state != FL_ERASING) { + /* Someone's suspended the erase. Sleep */ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + mutex_unlock(&chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + (HZ*20); /* FIXME */ + mutex_lock(&chip->mutex); + continue; + } + + status = map_read(map, adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + /* OK Still waiting */ + if (time_after(jiffies, timeo)) { + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + printk(KERN_ERR "waiting for erase to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]); + DISABLE_VPP(map); + mutex_unlock(&chip->mutex); + return -EIO; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + mutex_unlock(&chip->mutex); + cfi_udelay(1); + mutex_lock(&chip->mutex); + } + + DISABLE_VPP(map); + ret = 0; + + /* We've broken this before. It doesn't hurt to be safe */ + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + status = map_read(map, adr); + + /* check for lock bit */ + if (map_word_bitsset(map, status, CMD(0x3a))) { + unsigned char chipstatus = status.x[0]; + if (!map_word_equal(map, status, CMD(chipstatus))) { + int i, w; + for (w=0; w<map_words(map); w++) { + for (i = 0; i<cfi_interleave(cfi); i++) { + chipstatus |= status.x[w] >> (cfi->device_type * 8); + } + } + printk(KERN_WARNING "Status is not identical for all chips: 0x%lx. Merging to give 0x%02x\n", + status.x[0], chipstatus); + } + /* Reset the error bits */ + map_write(map, CMD(0x50), adr); + map_write(map, CMD(0x70), adr); + + if ((chipstatus & 0x30) == 0x30) { + printk(KERN_NOTICE "Chip reports improper command sequence: status 0x%x\n", chipstatus); + ret = -EIO; + } else if (chipstatus & 0x02) { + /* Protection bit set */ + ret = -EROFS; + } else if (chipstatus & 0x8) { + /* Voltage */ + printk(KERN_WARNING "Chip reports voltage low on erase: status 0x%x\n", chipstatus); + ret = -EIO; + } else if (chipstatus & 0x20) { + if (retries--) { + printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x. Retrying...\n", adr, chipstatus); + timeo = jiffies + HZ; + chip->state = FL_STATUS; + mutex_unlock(&chip->mutex); + goto retry; + } + printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x\n", adr, chipstatus); + ret = -EIO; + } + } + + wake_up(&chip->wq); + mutex_unlock(&chip->mutex); + return ret; +} + +static int cfi_staa_erase_varsize(struct mtd_info *mtd, + struct erase_info *instr) +{ struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long adr, len; + int chipnum, ret; + int i, first; + struct mtd_erase_region_info *regions = mtd->eraseregions; + + /* Check that both start and end of the requested erase are + * aligned with the erasesize at the appropriate addresses. + */ + + i = 0; + + /* Skip all erase regions which are ended before the start of + the requested erase. Actually, to save on the calculations, + we skip to the first erase region which starts after the + start of the requested erase, and then go back one. + */ + + while (i < mtd->numeraseregions && instr->addr >= regions[i].offset) + i++; + i--; + + /* OK, now i is pointing at the erase region in which this + erase request starts. Check the start of the requested + erase range is aligned with the erase size which is in + effect here. + */ + + if (instr->addr & (regions[i].erasesize-1)) + return -EINVAL; + + /* Remember the erase region we start on */ + first = i; + + /* Next, check that the end of the requested erase is aligned + * with the erase region at that address. + */ + + while (i<mtd->numeraseregions && (instr->addr + instr->len) >= regions[i].offset) + i++; + + /* As before, drop back one to point at the region in which + the address actually falls + */ + i--; + + if ((instr->addr + instr->len) & (regions[i].erasesize-1)) + return -EINVAL; + + chipnum = instr->addr >> cfi->chipshift; + adr = instr->addr - (chipnum << cfi->chipshift); + len = instr->len; + + i=first; + + while(len) { + ret = do_erase_oneblock(map, &cfi->chips[chipnum], adr); + + if (ret) + return ret; + + adr += regions[i].erasesize; + len -= regions[i].erasesize; + + if (adr % (1<< cfi->chipshift) == (((unsigned long)regions[i].offset + (regions[i].erasesize * regions[i].numblocks)) %( 1<< cfi->chipshift))) + i++; + + if (adr >> cfi->chipshift) { + adr = 0; + chipnum++; + + if (chipnum >= cfi->numchips) + break; + } + } + + return 0; +} + +static void cfi_staa_sync (struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int i; + struct flchip *chip; + int ret = 0; + DECLARE_WAITQUEUE(wait, current); + + for (i=0; !ret && i<cfi->numchips; i++) { + chip = &cfi->chips[i]; + + retry: + mutex_lock(&chip->mutex); + + switch(chip->state) { + case FL_READY: + case FL_STATUS: + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + chip->oldstate = chip->state; + chip->state = FL_SYNCING; + /* No need to wake_up() on this state change - + * as the whole point is that nobody can do anything + * with the chip now anyway. + */ + fallthrough; + case FL_SYNCING: + mutex_unlock(&chip->mutex); + break; + + default: + /* Not an idle state */ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + + mutex_unlock(&chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + + goto retry; + } + } + + /* Unlock the chips again */ + + for (i--; i >=0; i--) { + chip = &cfi->chips[i]; + + mutex_lock(&chip->mutex); + + if (chip->state == FL_SYNCING) { + chip->state = chip->oldstate; + wake_up(&chip->wq); + } + mutex_unlock(&chip->mutex); + } +} + +static inline int do_lock_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr) +{ + struct cfi_private *cfi = map->fldrv_priv; + map_word status, status_OK; + unsigned long timeo = jiffies + HZ; + DECLARE_WAITQUEUE(wait, current); + + adr += chip->start; + + /* Let's determine this according to the interleave only once */ + status_OK = CMD(0x80); + + timeo = jiffies + HZ; +retry: + mutex_lock(&chip->mutex); + + /* Check that the chip's ready to talk to us. */ + switch (chip->state) { + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + case FL_READY: + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + fallthrough; + case FL_STATUS: + status = map_read(map, adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + /* Urgh. Chip not yet ready to talk to us. */ + if (time_after(jiffies, timeo)) { + mutex_unlock(&chip->mutex); + printk(KERN_ERR "waiting for chip to be ready timed out in lock\n"); + return -EIO; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + mutex_unlock(&chip->mutex); + cfi_udelay(1); + goto retry; + + default: + /* Stick ourselves on a wait queue to be woken when + someone changes the status */ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + mutex_unlock(&chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + HZ; + goto retry; + } + + ENABLE_VPP(map); + map_write(map, CMD(0x60), adr); + map_write(map, CMD(0x01), adr); + chip->state = FL_LOCKING; + + mutex_unlock(&chip->mutex); + msleep(1000); + mutex_lock(&chip->mutex); + + /* FIXME. Use a timer to check this, and return immediately. */ + /* Once the state machine's known to be working I'll do that */ + + timeo = jiffies + (HZ*2); + for (;;) { + + status = map_read(map, adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + /* OK Still waiting */ + if (time_after(jiffies, timeo)) { + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + printk(KERN_ERR "waiting for lock to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]); + DISABLE_VPP(map); + mutex_unlock(&chip->mutex); + return -EIO; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + mutex_unlock(&chip->mutex); + cfi_udelay(1); + mutex_lock(&chip->mutex); + } + + /* Done and happy. */ + chip->state = FL_STATUS; + DISABLE_VPP(map); + wake_up(&chip->wq); + mutex_unlock(&chip->mutex); + return 0; +} +static int cfi_staa_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long adr; + int chipnum, ret; +#ifdef DEBUG_LOCK_BITS + int ofs_factor = cfi->interleave * cfi->device_type; +#endif + + if (ofs & (mtd->erasesize - 1)) + return -EINVAL; + + if (len & (mtd->erasesize -1)) + return -EINVAL; + + chipnum = ofs >> cfi->chipshift; + adr = ofs - (chipnum << cfi->chipshift); + + while(len) { + +#ifdef DEBUG_LOCK_BITS + cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL); + printk("before lock: block status register is %x\n",cfi_read_query(map, adr+(2*ofs_factor))); + cfi_send_gen_cmd(0xff, 0x55, 0, map, cfi, cfi->device_type, NULL); +#endif + + ret = do_lock_oneblock(map, &cfi->chips[chipnum], adr); + +#ifdef DEBUG_LOCK_BITS + cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL); + printk("after lock: block status register is %x\n",cfi_read_query(map, adr+(2*ofs_factor))); + cfi_send_gen_cmd(0xff, 0x55, 0, map, cfi, cfi->device_type, NULL); +#endif + + if (ret) + return ret; + + adr += mtd->erasesize; + len -= mtd->erasesize; + + if (adr >> cfi->chipshift) { + adr = 0; + chipnum++; + + if (chipnum >= cfi->numchips) + break; + } + } + return 0; +} +static inline int do_unlock_oneblock(struct map_info *map, struct flchip *chip, unsigned long adr) +{ + struct cfi_private *cfi = map->fldrv_priv; + map_word status, status_OK; + unsigned long timeo = jiffies + HZ; + DECLARE_WAITQUEUE(wait, current); + + adr += chip->start; + + /* Let's determine this according to the interleave only once */ + status_OK = CMD(0x80); + + timeo = jiffies + HZ; +retry: + mutex_lock(&chip->mutex); + + /* Check that the chip's ready to talk to us. */ + switch (chip->state) { + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + case FL_READY: + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + fallthrough; + case FL_STATUS: + status = map_read(map, adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + /* Urgh. Chip not yet ready to talk to us. */ + if (time_after(jiffies, timeo)) { + mutex_unlock(&chip->mutex); + printk(KERN_ERR "waiting for chip to be ready timed out in unlock\n"); + return -EIO; + } + + /* Latency issues. Drop the lock, wait a while and retry */ + mutex_unlock(&chip->mutex); + cfi_udelay(1); + goto retry; + + default: + /* Stick ourselves on a wait queue to be woken when + someone changes the status */ + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + mutex_unlock(&chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + HZ; + goto retry; + } + + ENABLE_VPP(map); + map_write(map, CMD(0x60), adr); + map_write(map, CMD(0xD0), adr); + chip->state = FL_UNLOCKING; + + mutex_unlock(&chip->mutex); + msleep(1000); + mutex_lock(&chip->mutex); + + /* FIXME. Use a timer to check this, and return immediately. */ + /* Once the state machine's known to be working I'll do that */ + + timeo = jiffies + (HZ*2); + for (;;) { + + status = map_read(map, adr); + if (map_word_andequal(map, status, status_OK, status_OK)) + break; + + /* OK Still waiting */ + if (time_after(jiffies, timeo)) { + map_write(map, CMD(0x70), adr); + chip->state = FL_STATUS; + printk(KERN_ERR "waiting for unlock to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]); + DISABLE_VPP(map); + mutex_unlock(&chip->mutex); + return -EIO; + } + + /* Latency issues. Drop the unlock, wait a while and retry */ + mutex_unlock(&chip->mutex); + cfi_udelay(1); + mutex_lock(&chip->mutex); + } + + /* Done and happy. */ + chip->state = FL_STATUS; + DISABLE_VPP(map); + wake_up(&chip->wq); + mutex_unlock(&chip->mutex); + return 0; +} +static int cfi_staa_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long adr; + int chipnum, ret; +#ifdef DEBUG_LOCK_BITS + int ofs_factor = cfi->interleave * cfi->device_type; +#endif + + chipnum = ofs >> cfi->chipshift; + adr = ofs - (chipnum << cfi->chipshift); + +#ifdef DEBUG_LOCK_BITS + { + unsigned long temp_adr = adr; + unsigned long temp_len = len; + + cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL); + while (temp_len) { + printk("before unlock %x: block status register is %x\n",temp_adr,cfi_read_query(map, temp_adr+(2*ofs_factor))); + temp_adr += mtd->erasesize; + temp_len -= mtd->erasesize; + } + cfi_send_gen_cmd(0xff, 0x55, 0, map, cfi, cfi->device_type, NULL); + } +#endif + + ret = do_unlock_oneblock(map, &cfi->chips[chipnum], adr); + +#ifdef DEBUG_LOCK_BITS + cfi_send_gen_cmd(0x90, 0x55, 0, map, cfi, cfi->device_type, NULL); + printk("after unlock: block status register is %x\n",cfi_read_query(map, adr+(2*ofs_factor))); + cfi_send_gen_cmd(0xff, 0x55, 0, map, cfi, cfi->device_type, NULL); +#endif + + return ret; +} + +static int cfi_staa_suspend(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int i; + struct flchip *chip; + int ret = 0; + + for (i=0; !ret && i<cfi->numchips; i++) { + chip = &cfi->chips[i]; + + mutex_lock(&chip->mutex); + + switch(chip->state) { + case FL_READY: + case FL_STATUS: + case FL_CFI_QUERY: + case FL_JEDEC_QUERY: + chip->oldstate = chip->state; + chip->state = FL_PM_SUSPENDED; + /* No need to wake_up() on this state change - + * as the whole point is that nobody can do anything + * with the chip now anyway. + */ + case FL_PM_SUSPENDED: + break; + + default: + ret = -EAGAIN; + break; + } + mutex_unlock(&chip->mutex); + } + + /* Unlock the chips again */ + + if (ret) { + for (i--; i >=0; i--) { + chip = &cfi->chips[i]; + + mutex_lock(&chip->mutex); + + if (chip->state == FL_PM_SUSPENDED) { + /* No need to force it into a known state here, + because we're returning failure, and it didn't + get power cycled */ + chip->state = chip->oldstate; + wake_up(&chip->wq); + } + mutex_unlock(&chip->mutex); + } + } + + return ret; +} + +static void cfi_staa_resume(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + int i; + struct flchip *chip; + + for (i=0; i<cfi->numchips; i++) { + + chip = &cfi->chips[i]; + + mutex_lock(&chip->mutex); + + /* Go to known state. Chip may have been power cycled */ + if (chip->state == FL_PM_SUSPENDED) { + map_write(map, CMD(0xFF), 0); + chip->state = FL_READY; + wake_up(&chip->wq); + } + + mutex_unlock(&chip->mutex); + } +} + +static void cfi_staa_destroy(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + kfree(cfi->cmdset_priv); + kfree(cfi); +} + +MODULE_LICENSE("GPL"); diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c new file mode 100644 index 000000000..cf4269564 --- /dev/null +++ b/drivers/mtd/chips/cfi_probe.c @@ -0,0 +1,462 @@ +/* + Common Flash Interface probe code. + (C) 2000 Red Hat. GPL'd. +*/ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <asm/io.h> +#include <asm/byteorder.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/interrupt.h> + +#include <linux/mtd/xip.h> +#include <linux/mtd/map.h> +#include <linux/mtd/cfi.h> +#include <linux/mtd/gen_probe.h> + +//#define DEBUG_CFI + +#ifdef DEBUG_CFI +static void print_cfi_ident(struct cfi_ident *); +#endif + +static int cfi_probe_chip(struct map_info *map, __u32 base, + unsigned long *chip_map, struct cfi_private *cfi); +static int cfi_chip_setup(struct map_info *map, struct cfi_private *cfi); + +struct mtd_info *cfi_probe(struct map_info *map); + +#ifdef CONFIG_MTD_XIP + +/* only needed for short periods, so this is rather simple */ +#define xip_disable() local_irq_disable() + +#define xip_allowed(base, map) \ +do { \ + (void) map_read(map, base); \ + xip_iprefetch(); \ + local_irq_enable(); \ +} while (0) + +#define xip_enable(base, map, cfi) \ +do { \ + cfi_qry_mode_off(base, map, cfi); \ + xip_allowed(base, map); \ +} while (0) + +#define xip_disable_qry(base, map, cfi) \ +do { \ + xip_disable(); \ + cfi_qry_mode_on(base, map, cfi); \ +} while (0) + +#else + +#define xip_disable() do { } while (0) +#define xip_allowed(base, map) do { } while (0) +#define xip_enable(base, map, cfi) do { } while (0) +#define xip_disable_qry(base, map, cfi) do { } while (0) + +#endif + +/* + * This fixup occurs immediately after reading the CFI structure and can affect + * the number of chips detected, unlike cfi_fixup, which occurs after an + * mtd_info structure has been created for the chip. + */ +struct cfi_early_fixup { + uint16_t mfr; + uint16_t id; + void (*fixup)(struct cfi_private *cfi); +}; + +static void cfi_early_fixup(struct cfi_private *cfi, + const struct cfi_early_fixup *fixups) +{ + const struct cfi_early_fixup *f; + + for (f = fixups; f->fixup; f++) { + if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi->mfr)) && + ((f->id == CFI_ID_ANY) || (f->id == cfi->id))) { + f->fixup(cfi); + } + } +} + +/* check for QRY. + in: interleave,type,mode + ret: table index, <0 for error + */ + +static int __xipram cfi_probe_chip(struct map_info *map, __u32 base, + unsigned long *chip_map, struct cfi_private *cfi) +{ + int i; + + if ((base + 0) >= map->size) { + printk(KERN_NOTICE + "Probe at base[0x00](0x%08lx) past the end of the map(0x%08lx)\n", + (unsigned long)base, map->size -1); + return 0; + } + if ((base + 0xff) >= map->size) { + printk(KERN_NOTICE + "Probe at base[0x55](0x%08lx) past the end of the map(0x%08lx)\n", + (unsigned long)base + 0x55, map->size -1); + return 0; + } + + xip_disable(); + if (!cfi_qry_mode_on(base, map, cfi)) { + xip_enable(base, map, cfi); + return 0; + } + + if (!cfi->numchips) { + /* This is the first time we're called. Set up the CFI + stuff accordingly and return */ + return cfi_chip_setup(map, cfi); + } + + /* Check each previous chip to see if it's an alias */ + for (i=0; i < (base >> cfi->chipshift); i++) { + unsigned long start; + if(!test_bit(i, chip_map)) { + /* Skip location; no valid chip at this address */ + continue; + } + start = i << cfi->chipshift; + /* This chip should be in read mode if it's one + we've already touched. */ + if (cfi_qry_present(map, start, cfi)) { + /* Eep. This chip also had the QRY marker. + * Is it an alias for the new one? */ + cfi_qry_mode_off(start, map, cfi); + + /* If the QRY marker goes away, it's an alias */ + if (!cfi_qry_present(map, start, cfi)) { + xip_allowed(base, map); + printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n", + map->name, base, start); + return 0; + } + /* Yes, it's actually got QRY for data. Most + * unfortunate. Stick the new chip in read mode + * too and if it's the same, assume it's an alias. */ + /* FIXME: Use other modes to do a proper check */ + cfi_qry_mode_off(base, map, cfi); + + if (cfi_qry_present(map, base, cfi)) { + xip_allowed(base, map); + printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n", + map->name, base, start); + return 0; + } + } + } + + /* OK, if we got to here, then none of the previous chips appear to + be aliases for the current one. */ + set_bit((base >> cfi->chipshift), chip_map); /* Update chip map */ + cfi->numchips++; + + /* Put it back into Read Mode */ + cfi_qry_mode_off(base, map, cfi); + xip_allowed(base, map); + + printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n", + map->name, cfi->interleave, cfi->device_type*8, base, + map->bankwidth*8); + + return 1; +} + +static void fixup_s70gl02gs_chips(struct cfi_private *cfi) +{ + /* + * S70GL02GS flash reports a single 256 MiB chip, but is really made up + * of two 128 MiB chips with 1024 sectors each. + */ + cfi->cfiq->DevSize = 27; + cfi->cfiq->EraseRegionInfo[0] = 0x20003ff; + pr_warn("Bad S70GL02GS CFI data; adjust to detect 2 chips\n"); +} + +static const struct cfi_early_fixup cfi_early_fixup_table[] = { + { CFI_MFR_AMD, 0x4801, fixup_s70gl02gs_chips }, + { }, +}; + +static int __xipram cfi_chip_setup(struct map_info *map, + struct cfi_private *cfi) +{ + int ofs_factor = cfi->interleave*cfi->device_type; + __u32 base = 0; + int num_erase_regions = cfi_read_query(map, base + (0x10 + 28)*ofs_factor); + int i; + int addr_unlock1 = 0x555, addr_unlock2 = 0x2AA; + + xip_enable(base, map, cfi); +#ifdef DEBUG_CFI + printk("Number of erase regions: %d\n", num_erase_regions); +#endif + if (!num_erase_regions) + return 0; + + cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL); + if (!cfi->cfiq) + return 0; + + memset(cfi->cfiq,0,sizeof(struct cfi_ident)); + + cfi->cfi_mode = CFI_MODE_CFI; + + cfi->sector_erase_cmd = CMD(0x30); + + /* Read the CFI info structure */ + xip_disable_qry(base, map, cfi); + for (i=0; i<(sizeof(struct cfi_ident) + num_erase_regions * 4); i++) + ((unsigned char *)cfi->cfiq)[i] = cfi_read_query(map,base + (0x10 + i)*ofs_factor); + + /* Do any necessary byteswapping */ + cfi->cfiq->P_ID = le16_to_cpu(cfi->cfiq->P_ID); + + cfi->cfiq->P_ADR = le16_to_cpu(cfi->cfiq->P_ADR); + cfi->cfiq->A_ID = le16_to_cpu(cfi->cfiq->A_ID); + cfi->cfiq->A_ADR = le16_to_cpu(cfi->cfiq->A_ADR); + cfi->cfiq->InterfaceDesc = le16_to_cpu(cfi->cfiq->InterfaceDesc); + cfi->cfiq->MaxBufWriteSize = le16_to_cpu(cfi->cfiq->MaxBufWriteSize); + +#ifdef DEBUG_CFI + /* Dump the information therein */ + print_cfi_ident(cfi->cfiq); +#endif + + for (i=0; i<cfi->cfiq->NumEraseRegions; i++) { + cfi->cfiq->EraseRegionInfo[i] = le32_to_cpu(cfi->cfiq->EraseRegionInfo[i]); + +#ifdef DEBUG_CFI + printk(" Erase Region #%d: BlockSize 0x%4.4X bytes, %d blocks\n", + i, (cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff, + (cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1); +#endif + } + + if (cfi->cfiq->P_ID == P_ID_SST_OLD) { + addr_unlock1 = 0x5555; + addr_unlock2 = 0x2AAA; + } + + /* + * Note we put the device back into Read Mode BEFORE going into Auto + * Select Mode, as some devices support nesting of modes, others + * don't. This way should always work. + * On cmdset 0001 the writes of 0xaa and 0x55 are not needed, and + * so should be treated as nops or illegal (and so put the device + * back into Read Mode, which is a nop in this case). + */ + cfi_send_gen_cmd(0xf0, 0, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0xaa, addr_unlock1, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, addr_unlock2, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x90, addr_unlock1, base, map, cfi, cfi->device_type, NULL); + cfi->mfr = cfi_read_query16(map, base); + cfi->id = cfi_read_query16(map, base + ofs_factor); + + /* Get AMD/Spansion extended JEDEC ID */ + if (cfi->mfr == CFI_MFR_AMD && (cfi->id & 0xff) == 0x7e) + cfi->id = cfi_read_query(map, base + 0xe * ofs_factor) << 8 | + cfi_read_query(map, base + 0xf * ofs_factor); + + /* Put it back into Read Mode */ + cfi_qry_mode_off(base, map, cfi); + xip_allowed(base, map); + + cfi_early_fixup(cfi, cfi_early_fixup_table); + + printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank. Manufacturer ID %#08x Chip ID %#08x\n", + map->name, cfi->interleave, cfi->device_type*8, base, + map->bankwidth*8, cfi->mfr, cfi->id); + + return 1; +} + +#ifdef DEBUG_CFI +static char *vendorname(__u16 vendor) +{ + switch (vendor) { + case P_ID_NONE: + return "None"; + + case P_ID_INTEL_EXT: + return "Intel/Sharp Extended"; + + case P_ID_AMD_STD: + return "AMD/Fujitsu Standard"; + + case P_ID_INTEL_STD: + return "Intel/Sharp Standard"; + + case P_ID_AMD_EXT: + return "AMD/Fujitsu Extended"; + + case P_ID_WINBOND: + return "Winbond Standard"; + + case P_ID_ST_ADV: + return "ST Advanced"; + + case P_ID_MITSUBISHI_STD: + return "Mitsubishi Standard"; + + case P_ID_MITSUBISHI_EXT: + return "Mitsubishi Extended"; + + case P_ID_SST_PAGE: + return "SST Page Write"; + + case P_ID_SST_OLD: + return "SST 39VF160x/39VF320x"; + + case P_ID_INTEL_PERFORMANCE: + return "Intel Performance Code"; + + case P_ID_INTEL_DATA: + return "Intel Data"; + + case P_ID_RESERVED: + return "Not Allowed / Reserved for Future Use"; + + default: + return "Unknown"; + } +} + + +static void print_cfi_ident(struct cfi_ident *cfip) +{ +#if 0 + if (cfip->qry[0] != 'Q' || cfip->qry[1] != 'R' || cfip->qry[2] != 'Y') { + printk("Invalid CFI ident structure.\n"); + return; + } +#endif + printk("Primary Vendor Command Set: %4.4X (%s)\n", cfip->P_ID, vendorname(cfip->P_ID)); + if (cfip->P_ADR) + printk("Primary Algorithm Table at %4.4X\n", cfip->P_ADR); + else + printk("No Primary Algorithm Table\n"); + + printk("Alternative Vendor Command Set: %4.4X (%s)\n", cfip->A_ID, vendorname(cfip->A_ID)); + if (cfip->A_ADR) + printk("Alternate Algorithm Table at %4.4X\n", cfip->A_ADR); + else + printk("No Alternate Algorithm Table\n"); + + + printk("Vcc Minimum: %2d.%d V\n", cfip->VccMin >> 4, cfip->VccMin & 0xf); + printk("Vcc Maximum: %2d.%d V\n", cfip->VccMax >> 4, cfip->VccMax & 0xf); + if (cfip->VppMin) { + printk("Vpp Minimum: %2d.%d V\n", cfip->VppMin >> 4, cfip->VppMin & 0xf); + printk("Vpp Maximum: %2d.%d V\n", cfip->VppMax >> 4, cfip->VppMax & 0xf); + } + else + printk("No Vpp line\n"); + + printk("Typical byte/word write timeout: %d µs\n", 1<<cfip->WordWriteTimeoutTyp); + printk("Maximum byte/word write timeout: %d µs\n", (1<<cfip->WordWriteTimeoutMax) * (1<<cfip->WordWriteTimeoutTyp)); + + if (cfip->BufWriteTimeoutTyp || cfip->BufWriteTimeoutMax) { + printk("Typical full buffer write timeout: %d µs\n", 1<<cfip->BufWriteTimeoutTyp); + printk("Maximum full buffer write timeout: %d µs\n", (1<<cfip->BufWriteTimeoutMax) * (1<<cfip->BufWriteTimeoutTyp)); + } + else + printk("Full buffer write not supported\n"); + + printk("Typical block erase timeout: %d ms\n", 1<<cfip->BlockEraseTimeoutTyp); + printk("Maximum block erase timeout: %d ms\n", (1<<cfip->BlockEraseTimeoutMax) * (1<<cfip->BlockEraseTimeoutTyp)); + if (cfip->ChipEraseTimeoutTyp || cfip->ChipEraseTimeoutMax) { + printk("Typical chip erase timeout: %d ms\n", 1<<cfip->ChipEraseTimeoutTyp); + printk("Maximum chip erase timeout: %d ms\n", (1<<cfip->ChipEraseTimeoutMax) * (1<<cfip->ChipEraseTimeoutTyp)); + } + else + printk("Chip erase not supported\n"); + + printk("Device size: 0x%X bytes (%d MiB)\n", 1 << cfip->DevSize, 1<< (cfip->DevSize - 20)); + printk("Flash Device Interface description: 0x%4.4X\n", cfip->InterfaceDesc); + switch(cfip->InterfaceDesc) { + case CFI_INTERFACE_X8_ASYNC: + printk(" - x8-only asynchronous interface\n"); + break; + + case CFI_INTERFACE_X16_ASYNC: + printk(" - x16-only asynchronous interface\n"); + break; + + case CFI_INTERFACE_X8_BY_X16_ASYNC: + printk(" - supports x8 and x16 via BYTE# with asynchronous interface\n"); + break; + + case CFI_INTERFACE_X32_ASYNC: + printk(" - x32-only asynchronous interface\n"); + break; + + case CFI_INTERFACE_X16_BY_X32_ASYNC: + printk(" - supports x16 and x32 via Word# with asynchronous interface\n"); + break; + + case CFI_INTERFACE_NOT_ALLOWED: + printk(" - Not Allowed / Reserved\n"); + break; + + default: + printk(" - Unknown\n"); + break; + } + + printk("Max. bytes in buffer write: 0x%x\n", 1<< cfip->MaxBufWriteSize); + printk("Number of Erase Block Regions: %d\n", cfip->NumEraseRegions); + +} +#endif /* DEBUG_CFI */ + +static struct chip_probe cfi_chip_probe = { + .name = "CFI", + .probe_chip = cfi_probe_chip +}; + +struct mtd_info *cfi_probe(struct map_info *map) +{ + /* + * Just use the generic probe stuff to call our CFI-specific + * chip_probe routine in all the possible permutations, etc. + */ + return mtd_do_chip_probe(map, &cfi_chip_probe); +} + +static struct mtd_chip_driver cfi_chipdrv = { + .probe = cfi_probe, + .name = "cfi_probe", + .module = THIS_MODULE +}; + +static int __init cfi_probe_init(void) +{ + register_mtd_chip_driver(&cfi_chipdrv); + return 0; +} + +static void __exit cfi_probe_exit(void) +{ + unregister_mtd_chip_driver(&cfi_chipdrv); +} + +module_init(cfi_probe_init); +module_exit(cfi_probe_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al."); +MODULE_DESCRIPTION("Probe code for CFI-compliant flash chips"); diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c new file mode 100644 index 000000000..99b798600 --- /dev/null +++ b/drivers/mtd/chips/cfi_util.c @@ -0,0 +1,445 @@ +/* + * Common Flash Interface support: + * Generic utility functions not dependent on command set + * + * Copyright (C) 2002 Red Hat + * Copyright (C) 2003 STMicroelectronics Limited + * + * This code is covered by the GPL. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <asm/io.h> +#include <asm/byteorder.h> + +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/mtd/xip.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/cfi.h> + +void cfi_udelay(int us) +{ + if (us >= 1000) { + msleep(DIV_ROUND_UP(us, 1000)); + } else { + udelay(us); + cond_resched(); + } +} +EXPORT_SYMBOL(cfi_udelay); + +/* + * Returns the command address according to the given geometry. + */ +uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, + struct map_info *map, struct cfi_private *cfi) +{ + unsigned bankwidth = map_bankwidth(map); + unsigned interleave = cfi_interleave(cfi); + unsigned type = cfi->device_type; + uint32_t addr; + + addr = (cmd_ofs * type) * interleave; + + /* Modify the unlock address if we are in compatibility mode. + * For 16bit devices on 8 bit busses + * and 32bit devices on 16 bit busses + * set the low bit of the alternating bit sequence of the address. + */ + if (((type * interleave) > bankwidth) && ((cmd_ofs & 0xff) == 0xaa)) + addr |= (type >> 1)*interleave; + + return addr; +} +EXPORT_SYMBOL(cfi_build_cmd_addr); + +/* + * Transforms the CFI command for the given geometry (bus width & interleave). + * It looks too long to be inline, but in the common case it should almost all + * get optimised away. + */ +map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi) +{ + map_word val = { {0} }; + int wordwidth, words_per_bus, chip_mode, chips_per_word; + unsigned long onecmd; + int i; + + /* We do it this way to give the compiler a fighting chance + of optimising away all the crap for 'bankwidth' larger than + an unsigned long, in the common case where that support is + disabled */ + if (map_bankwidth_is_large(map)) { + wordwidth = sizeof(unsigned long); + words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1 + } else { + wordwidth = map_bankwidth(map); + words_per_bus = 1; + } + + chip_mode = map_bankwidth(map) / cfi_interleave(cfi); + chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map); + + /* First, determine what the bit-pattern should be for a single + device, according to chip mode and endianness... */ + switch (chip_mode) { + default: BUG(); + case 1: + onecmd = cmd; + break; + case 2: + onecmd = cpu_to_cfi16(map, cmd); + break; + case 4: + onecmd = cpu_to_cfi32(map, cmd); + break; + } + + /* Now replicate it across the size of an unsigned long, or + just to the bus width as appropriate */ + switch (chips_per_word) { + default: BUG(); +#if BITS_PER_LONG >= 64 + case 8: + onecmd |= (onecmd << (chip_mode * 32)); +#endif + fallthrough; + case 4: + onecmd |= (onecmd << (chip_mode * 16)); + fallthrough; + case 2: + onecmd |= (onecmd << (chip_mode * 8)); + fallthrough; + case 1: + ; + } + + /* And finally, for the multi-word case, replicate it + in all words in the structure */ + for (i=0; i < words_per_bus; i++) { + val.x[i] = onecmd; + } + + return val; +} +EXPORT_SYMBOL(cfi_build_cmd); + +unsigned long cfi_merge_status(map_word val, struct map_info *map, + struct cfi_private *cfi) +{ + int wordwidth, words_per_bus, chip_mode, chips_per_word; + unsigned long onestat, res = 0; + int i; + + /* We do it this way to give the compiler a fighting chance + of optimising away all the crap for 'bankwidth' larger than + an unsigned long, in the common case where that support is + disabled */ + if (map_bankwidth_is_large(map)) { + wordwidth = sizeof(unsigned long); + words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1 + } else { + wordwidth = map_bankwidth(map); + words_per_bus = 1; + } + + chip_mode = map_bankwidth(map) / cfi_interleave(cfi); + chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map); + + onestat = val.x[0]; + /* Or all status words together */ + for (i=1; i < words_per_bus; i++) { + onestat |= val.x[i]; + } + + res = onestat; + switch(chips_per_word) { + default: BUG(); +#if BITS_PER_LONG >= 64 + case 8: + res |= (onestat >> (chip_mode * 32)); +#endif + fallthrough; + case 4: + res |= (onestat >> (chip_mode * 16)); + fallthrough; + case 2: + res |= (onestat >> (chip_mode * 8)); + fallthrough; + case 1: + ; + } + + /* Last, determine what the bit-pattern should be for a single + device, according to chip mode and endianness... */ + switch (chip_mode) { + case 1: + break; + case 2: + res = cfi16_to_cpu(map, res); + break; + case 4: + res = cfi32_to_cpu(map, res); + break; + default: BUG(); + } + return res; +} +EXPORT_SYMBOL(cfi_merge_status); + +/* + * Sends a CFI command to a bank of flash for the given geometry. + * + * Returns the offset in flash where the command was written. + * If prev_val is non-null, it will be set to the value at the command address, + * before the command was written. + */ +uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base, + struct map_info *map, struct cfi_private *cfi, + int type, map_word *prev_val) +{ + map_word val; + uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, map, cfi); + val = cfi_build_cmd(cmd, map, cfi); + + if (prev_val) + *prev_val = map_read(map, addr); + + map_write(map, val, addr); + + return addr - base; +} +EXPORT_SYMBOL(cfi_send_gen_cmd); + +int __xipram cfi_qry_present(struct map_info *map, __u32 base, + struct cfi_private *cfi) +{ + int osf = cfi->interleave * cfi->device_type; /* scale factor */ + map_word val[3]; + map_word qry[3]; + + qry[0] = cfi_build_cmd('Q', map, cfi); + qry[1] = cfi_build_cmd('R', map, cfi); + qry[2] = cfi_build_cmd('Y', map, cfi); + + val[0] = map_read(map, base + osf*0x10); + val[1] = map_read(map, base + osf*0x11); + val[2] = map_read(map, base + osf*0x12); + + if (!map_word_equal(map, qry[0], val[0])) + return 0; + + if (!map_word_equal(map, qry[1], val[1])) + return 0; + + if (!map_word_equal(map, qry[2], val[2])) + return 0; + + return 1; /* "QRY" found */ +} +EXPORT_SYMBOL_GPL(cfi_qry_present); + +int __xipram cfi_qry_mode_on(uint32_t base, struct map_info *map, + struct cfi_private *cfi) +{ + cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL); + if (cfi_qry_present(map, base, cfi)) + return 1; + /* QRY not found probably we deal with some odd CFI chips */ + /* Some revisions of some old Intel chips? */ + cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL); + if (cfi_qry_present(map, base, cfi)) + return 1; + /* ST M29DW chips */ + cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x98, 0x555, base, map, cfi, cfi->device_type, NULL); + if (cfi_qry_present(map, base, cfi)) + return 1; + /* some old SST chips, e.g. 39VF160x/39VF320x */ + cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0xAA, 0x5555, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, 0x2AAA, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x98, 0x5555, base, map, cfi, cfi->device_type, NULL); + if (cfi_qry_present(map, base, cfi)) + return 1; + /* SST 39VF640xB */ + cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0xAA, 0x555, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, 0x2AA, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x98, 0x555, base, map, cfi, cfi->device_type, NULL); + if (cfi_qry_present(map, base, cfi)) + return 1; + /* QRY not found */ + return 0; +} +EXPORT_SYMBOL_GPL(cfi_qry_mode_on); + +void __xipram cfi_qry_mode_off(uint32_t base, struct map_info *map, + struct cfi_private *cfi) +{ + cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); + /* M29W128G flashes require an additional reset command + when exit qry mode */ + if ((cfi->mfr == CFI_MFR_ST) && (cfi->id == 0x227E || cfi->id == 0x7E)) + cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL); +} +EXPORT_SYMBOL_GPL(cfi_qry_mode_off); + +struct cfi_extquery * +__xipram cfi_read_pri(struct map_info *map, __u16 adr, __u16 size, const char* name) +{ + struct cfi_private *cfi = map->fldrv_priv; + __u32 base = 0; // cfi->chips[0].start; + int ofs_factor = cfi->interleave * cfi->device_type; + int i; + struct cfi_extquery *extp = NULL; + + if (!adr) + goto out; + + printk(KERN_INFO "%s Extended Query Table at 0x%4.4X\n", name, adr); + + extp = kmalloc(size, GFP_KERNEL); + if (!extp) + goto out; + +#ifdef CONFIG_MTD_XIP + local_irq_disable(); +#endif + + /* Switch it into Query Mode */ + cfi_qry_mode_on(base, map, cfi); + /* Read in the Extended Query Table */ + for (i=0; i<size; i++) { + ((unsigned char *)extp)[i] = + cfi_read_query(map, base+((adr+i)*ofs_factor)); + } + + /* Make sure it returns to read mode */ + cfi_qry_mode_off(base, map, cfi); + +#ifdef CONFIG_MTD_XIP + (void) map_read(map, base); + xip_iprefetch(); + local_irq_enable(); +#endif + + out: return extp; +} + +EXPORT_SYMBOL(cfi_read_pri); + +void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup *fixups) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + struct cfi_fixup *f; + + for (f=fixups; f->fixup; f++) { + if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi->mfr)) && + ((f->id == CFI_ID_ANY) || (f->id == cfi->id))) { + f->fixup(mtd); + } + } +} + +EXPORT_SYMBOL(cfi_fixup); + +int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob, + loff_t ofs, size_t len, void *thunk) +{ + struct map_info *map = mtd->priv; + struct cfi_private *cfi = map->fldrv_priv; + unsigned long adr; + int chipnum, ret = 0; + int i, first; + struct mtd_erase_region_info *regions = mtd->eraseregions; + + /* Check that both start and end of the requested erase are + * aligned with the erasesize at the appropriate addresses. + */ + + i = 0; + + /* Skip all erase regions which are ended before the start of + the requested erase. Actually, to save on the calculations, + we skip to the first erase region which starts after the + start of the requested erase, and then go back one. + */ + + while (i < mtd->numeraseregions && ofs >= regions[i].offset) + i++; + i--; + + /* OK, now i is pointing at the erase region in which this + erase request starts. Check the start of the requested + erase range is aligned with the erase size which is in + effect here. + */ + + if (ofs & (regions[i].erasesize-1)) + return -EINVAL; + + /* Remember the erase region we start on */ + first = i; + + /* Next, check that the end of the requested erase is aligned + * with the erase region at that address. + */ + + while (i<mtd->numeraseregions && (ofs + len) >= regions[i].offset) + i++; + + /* As before, drop back one to point at the region in which + the address actually falls + */ + i--; + + if ((ofs + len) & (regions[i].erasesize-1)) + return -EINVAL; + + chipnum = ofs >> cfi->chipshift; + adr = ofs - (chipnum << cfi->chipshift); + + i=first; + + while(len) { + int size = regions[i].erasesize; + + ret = (*frob)(map, &cfi->chips[chipnum], adr, size, thunk); + + if (ret) + return ret; + + adr += size; + ofs += size; + len -= size; + + if (ofs == regions[i].offset + size * regions[i].numblocks) + i++; + + if (adr >> cfi->chipshift) { + adr = 0; + chipnum++; + + if (chipnum >= cfi->numchips) + break; + } + } + + return 0; +} + +EXPORT_SYMBOL(cfi_varsize_frob); + +MODULE_LICENSE("GPL"); diff --git a/drivers/mtd/chips/chipreg.c b/drivers/mtd/chips/chipreg.c new file mode 100644 index 000000000..ff86373d7 --- /dev/null +++ b/drivers/mtd/chips/chipreg.c @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Registration for chip drivers + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/kmod.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/mtd/map.h> +#include <linux/mtd/mtd.h> + +static DEFINE_SPINLOCK(chip_drvs_lock); +static LIST_HEAD(chip_drvs_list); + +void register_mtd_chip_driver(struct mtd_chip_driver *drv) +{ + spin_lock(&chip_drvs_lock); + list_add(&drv->list, &chip_drvs_list); + spin_unlock(&chip_drvs_lock); +} + +void unregister_mtd_chip_driver(struct mtd_chip_driver *drv) +{ + spin_lock(&chip_drvs_lock); + list_del(&drv->list); + spin_unlock(&chip_drvs_lock); +} + +static struct mtd_chip_driver *get_mtd_chip_driver (const char *name) +{ + struct list_head *pos; + struct mtd_chip_driver *ret = NULL, *this; + + spin_lock(&chip_drvs_lock); + + list_for_each(pos, &chip_drvs_list) { + this = list_entry(pos, typeof(*this), list); + + if (!strcmp(this->name, name)) { + ret = this; + break; + } + } + if (ret && !try_module_get(ret->module)) + ret = NULL; + + spin_unlock(&chip_drvs_lock); + + return ret; +} + + /* Hide all the horrid details, like some silly person taking + get_module_symbol() away from us, from the caller. */ + +struct mtd_info *do_map_probe(const char *name, struct map_info *map) +{ + struct mtd_chip_driver *drv; + struct mtd_info *ret; + + drv = get_mtd_chip_driver(name); + + if (!drv && !request_module("%s", name)) + drv = get_mtd_chip_driver(name); + + if (!drv) + return NULL; + + ret = drv->probe(map); + + /* We decrease the use count here. It may have been a + probe-only module, which is no longer required from this + point, having given us a handle on (and increased the use + count of) the actual driver code. + */ + module_put(drv->module); + + return ret; +} +/* + * Destroy an MTD device which was created for a map device. + * Make sure the MTD device is already unregistered before calling this + */ +void map_destroy(struct mtd_info *mtd) +{ + struct map_info *map = mtd->priv; + + if (map->fldrv->destroy) + map->fldrv->destroy(mtd); + + module_put(map->fldrv->module); + + kfree(mtd); +} + +EXPORT_SYMBOL(register_mtd_chip_driver); +EXPORT_SYMBOL(unregister_mtd_chip_driver); +EXPORT_SYMBOL(do_map_probe); +EXPORT_SYMBOL(map_destroy); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>"); +MODULE_DESCRIPTION("Core routines for registering and invoking MTD chip drivers"); diff --git a/drivers/mtd/chips/fwh_lock.h b/drivers/mtd/chips/fwh_lock.h new file mode 100644 index 000000000..53e6b2d59 --- /dev/null +++ b/drivers/mtd/chips/fwh_lock.h @@ -0,0 +1,108 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef FWH_LOCK_H +#define FWH_LOCK_H + + +enum fwh_lock_state { + FWH_UNLOCKED = 0, + FWH_DENY_WRITE = 1, + FWH_IMMUTABLE = 2, + FWH_DENY_READ = 4, +}; + +struct fwh_xxlock_thunk { + enum fwh_lock_state val; + flstate_t state; +}; + + +#define FWH_XXLOCK_ONEBLOCK_LOCK ((struct fwh_xxlock_thunk){ FWH_DENY_WRITE, FL_LOCKING}) +#define FWH_XXLOCK_ONEBLOCK_UNLOCK ((struct fwh_xxlock_thunk){ FWH_UNLOCKED, FL_UNLOCKING}) + +/* + * This locking/unlock is specific to firmware hub parts. Only one + * is known that supports the Intel command set. Firmware + * hub parts cannot be interleaved as they are on the LPC bus + * so this code has not been tested with interleaved chips, + * and will likely fail in that context. + */ +static int fwh_xxlock_oneblock(struct map_info *map, struct flchip *chip, + unsigned long adr, int len, void *thunk) +{ + struct cfi_private *cfi = map->fldrv_priv; + struct fwh_xxlock_thunk *xxlt = (struct fwh_xxlock_thunk *)thunk; + int ret; + + /* Refuse the operation if the we cannot look behind the chip */ + if (chip->start < 0x400000) { + pr_debug( "MTD %s(): chip->start: %lx wanted >= 0x400000\n", + __func__, chip->start ); + return -EIO; + } + /* + * lock block registers: + * - on 64k boundariesand + * - bit 1 set high + * - block lock registers are 4MiB lower - overflow subtract (danger) + * + * The address manipulation is first done on the logical address + * which is 0 at the start of the chip, and then the offset of + * the individual chip is addted to it. Any other order a weird + * map offset could cause problems. + */ + adr = (adr & ~0xffffUL) | 0x2; + adr += chip->start - 0x400000; + + /* + * This is easy because these are writes to registers and not writes + * to flash memory - that means that we don't have to check status + * and timeout. + */ + mutex_lock(&chip->mutex); + ret = get_chip(map, chip, adr, FL_LOCKING); + if (ret) { + mutex_unlock(&chip->mutex); + return ret; + } + + chip->oldstate = chip->state; + chip->state = xxlt->state; + map_write(map, CMD(xxlt->val), adr); + + /* Done and happy. */ + chip->state = chip->oldstate; + put_chip(map, chip, adr); + mutex_unlock(&chip->mutex); + return 0; +} + + +static int fwh_lock_varsize(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + int ret; + + ret = cfi_varsize_frob(mtd, fwh_xxlock_oneblock, ofs, len, + (void *)&FWH_XXLOCK_ONEBLOCK_LOCK); + + return ret; +} + + +static int fwh_unlock_varsize(struct mtd_info *mtd, loff_t ofs, uint64_t len) +{ + int ret; + + ret = cfi_varsize_frob(mtd, fwh_xxlock_oneblock, ofs, len, + (void *)&FWH_XXLOCK_ONEBLOCK_UNLOCK); + + return ret; +} + +static void fixup_use_fwh_lock(struct mtd_info *mtd) +{ + printk(KERN_NOTICE "using fwh lock/unlock method\n"); + /* Setup for the chips with the fwh lock method */ + mtd->_lock = fwh_lock_varsize; + mtd->_unlock = fwh_unlock_varsize; +} +#endif /* FWH_LOCK_H */ diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c new file mode 100644 index 000000000..e5bd3c2bc --- /dev/null +++ b/drivers/mtd/chips/gen_probe.c @@ -0,0 +1,267 @@ +/* + * Routines common to all CFI-type probes. + * (C) 2001-2003 Red Hat, Inc. + * GPL'd + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/cfi.h> +#include <linux/mtd/gen_probe.h> + +static struct mtd_info *check_cmd_set(struct map_info *, int); +static struct cfi_private *genprobe_ident_chips(struct map_info *map, + struct chip_probe *cp); +static int genprobe_new_chip(struct map_info *map, struct chip_probe *cp, + struct cfi_private *cfi); + +struct mtd_info *mtd_do_chip_probe(struct map_info *map, struct chip_probe *cp) +{ + struct mtd_info *mtd; + struct cfi_private *cfi; + + /* First probe the map to see if we have CFI stuff there. */ + cfi = genprobe_ident_chips(map, cp); + + if (!cfi) + return NULL; + + map->fldrv_priv = cfi; + /* OK we liked it. Now find a driver for the command set it talks */ + + mtd = check_cmd_set(map, 1); /* First the primary cmdset */ + if (!mtd) + mtd = check_cmd_set(map, 0); /* Then the secondary */ + + if (mtd) { + if (mtd->size > map->size) { + printk(KERN_WARNING "Reducing visibility of %ldKiB chip to %ldKiB\n", + (unsigned long)mtd->size >> 10, + (unsigned long)map->size >> 10); + mtd->size = map->size; + } + return mtd; + } + + printk(KERN_WARNING"gen_probe: No supported Vendor Command Set found\n"); + + kfree(cfi->cfiq); + kfree(cfi); + map->fldrv_priv = NULL; + return NULL; +} +EXPORT_SYMBOL(mtd_do_chip_probe); + + +static struct cfi_private *genprobe_ident_chips(struct map_info *map, struct chip_probe *cp) +{ + struct cfi_private cfi; + struct cfi_private *retcfi; + unsigned long *chip_map; + int i, j, mapsize; + int max_chips; + + memset(&cfi, 0, sizeof(cfi)); + + /* Call the probetype-specific code with all permutations of + interleave and device type, etc. */ + if (!genprobe_new_chip(map, cp, &cfi)) { + /* The probe didn't like it */ + pr_debug("%s: Found no %s device at location zero\n", + cp->name, map->name); + return NULL; + } + +#if 0 /* Let the CFI probe routine do this sanity check. The Intel and AMD + probe routines won't ever return a broken CFI structure anyway, + because they make them up themselves. + */ + if (cfi.cfiq->NumEraseRegions == 0) { + printk(KERN_WARNING "Number of erase regions is zero\n"); + kfree(cfi.cfiq); + return NULL; + } +#endif + cfi.chipshift = cfi.cfiq->DevSize; + + if (cfi_interleave_is_1(&cfi)) { + ; + } else if (cfi_interleave_is_2(&cfi)) { + cfi.chipshift++; + } else if (cfi_interleave_is_4((&cfi))) { + cfi.chipshift += 2; + } else if (cfi_interleave_is_8(&cfi)) { + cfi.chipshift += 3; + } else { + BUG(); + } + + cfi.numchips = 1; + + /* + * Allocate memory for bitmap of valid chips. + * Align bitmap storage size to full byte. + */ + max_chips = map->size >> cfi.chipshift; + if (!max_chips) { + printk(KERN_WARNING "NOR chip too large to fit in mapping. Attempting to cope...\n"); + max_chips = 1; + } + + mapsize = sizeof(long) * DIV_ROUND_UP(max_chips, BITS_PER_LONG); + chip_map = kzalloc(mapsize, GFP_KERNEL); + if (!chip_map) { + kfree(cfi.cfiq); + return NULL; + } + + set_bit(0, chip_map); /* Mark first chip valid */ + + /* + * Now probe for other chips, checking sensibly for aliases while + * we're at it. The new_chip probe above should have let the first + * chip in read mode. + */ + + for (i = 1; i < max_chips; i++) { + cp->probe_chip(map, i << cfi.chipshift, chip_map, &cfi); + } + + /* + * Now allocate the space for the structures we need to return to + * our caller, and copy the appropriate data into them. + */ + + retcfi = kmalloc(struct_size(retcfi, chips, cfi.numchips), GFP_KERNEL); + + if (!retcfi) { + kfree(cfi.cfiq); + kfree(chip_map); + return NULL; + } + + memcpy(retcfi, &cfi, sizeof(cfi)); + memset(&retcfi->chips[0], 0, sizeof(struct flchip) * cfi.numchips); + + for (i = 0, j = 0; (j < cfi.numchips) && (i < max_chips); i++) { + if(test_bit(i, chip_map)) { + struct flchip *pchip = &retcfi->chips[j++]; + + pchip->start = (i << cfi.chipshift); + pchip->state = FL_READY; + init_waitqueue_head(&pchip->wq); + mutex_init(&pchip->mutex); + } + } + + kfree(chip_map); + return retcfi; +} + + +static int genprobe_new_chip(struct map_info *map, struct chip_probe *cp, + struct cfi_private *cfi) +{ + int min_chips = (map_bankwidth(map)/4?:1); /* At most 4-bytes wide. */ + int max_chips = map_bankwidth(map); /* And minimum 1 */ + int nr_chips, type; + + for (nr_chips = max_chips; nr_chips >= min_chips; nr_chips >>= 1) { + + if (!cfi_interleave_supported(nr_chips)) + continue; + + cfi->interleave = nr_chips; + + /* Minimum device size. Don't look for one 8-bit device + in a 16-bit bus, etc. */ + type = map_bankwidth(map) / nr_chips; + + for (; type <= CFI_DEVICETYPE_X32; type<<=1) { + cfi->device_type = type; + + if (cp->probe_chip(map, 0, NULL, cfi)) + return 1; + } + } + return 0; +} + +typedef struct mtd_info *cfi_cmdset_fn_t(struct map_info *, int); + +extern cfi_cmdset_fn_t cfi_cmdset_0001; +extern cfi_cmdset_fn_t cfi_cmdset_0002; +extern cfi_cmdset_fn_t cfi_cmdset_0020; + +static inline struct mtd_info *cfi_cmdset_unknown(struct map_info *map, + int primary) +{ + struct cfi_private *cfi = map->fldrv_priv; + __u16 type = primary?cfi->cfiq->P_ID:cfi->cfiq->A_ID; +#ifdef CONFIG_MODULES + cfi_cmdset_fn_t *probe_function; + char *probename; + + probename = kasprintf(GFP_KERNEL, "cfi_cmdset_%4.4X", type); + if (!probename) + return NULL; + + probe_function = __symbol_get(probename); + if (!probe_function) { + request_module("cfi_cmdset_%4.4X", type); + probe_function = __symbol_get(probename); + } + kfree(probename); + + if (probe_function) { + struct mtd_info *mtd; + + mtd = (*probe_function)(map, primary); + /* If it was happy, it'll have increased its own use count */ + symbol_put_addr(probe_function); + return mtd; + } +#endif + printk(KERN_NOTICE "Support for command set %04X not present\n", type); + + return NULL; +} + +static struct mtd_info *check_cmd_set(struct map_info *map, int primary) +{ + struct cfi_private *cfi = map->fldrv_priv; + __u16 type = primary?cfi->cfiq->P_ID:cfi->cfiq->A_ID; + + if (type == P_ID_NONE || type == P_ID_RESERVED) + return NULL; + + switch(type){ + /* We need these for the !CONFIG_MODULES case, + because symbol_get() doesn't work there */ +#ifdef CONFIG_MTD_CFI_INTELEXT + case P_ID_INTEL_EXT: + case P_ID_INTEL_STD: + case P_ID_INTEL_PERFORMANCE: + return cfi_cmdset_0001(map, primary); +#endif +#ifdef CONFIG_MTD_CFI_AMDSTD + case P_ID_AMD_STD: + case P_ID_SST_OLD: + case P_ID_WINBOND: + return cfi_cmdset_0002(map, primary); +#endif +#ifdef CONFIG_MTD_CFI_STAA + case P_ID_ST_ADV: + return cfi_cmdset_0020(map, primary); +#endif + default: + return cfi_cmdset_unknown(map, primary); + } +} + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>"); +MODULE_DESCRIPTION("Helper routines for flash chip probe code"); diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c new file mode 100644 index 000000000..6f7e7e1b3 --- /dev/null +++ b/drivers/mtd/chips/jedec_probe.c @@ -0,0 +1,2315 @@ +/* + Common Flash Interface probe code. + (C) 2000 Red Hat. GPL'd. + See JEDEC (http://www.jedec.org/) standard JESD21C (section 3.5) + for the standard this probe goes back to. + + Occasionally maintained by Thayne Harbaugh tharbaugh at lnxi dot com +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <asm/io.h> +#include <asm/byteorder.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/interrupt.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/cfi.h> +#include <linux/mtd/gen_probe.h> + +/* AMD */ +#define AM29DL800BB 0x22CB +#define AM29DL800BT 0x224A + +#define AM29F800BB 0x2258 +#define AM29F800BT 0x22D6 +#define AM29LV400BB 0x22BA +#define AM29LV400BT 0x22B9 +#define AM29LV800BB 0x225B +#define AM29LV800BT 0x22DA +#define AM29LV160DT 0x22C4 +#define AM29LV160DB 0x2249 +#define AM29F017D 0x003D +#define AM29F016D 0x00AD +#define AM29F080 0x00D5 +#define AM29F040 0x00A4 +#define AM29LV040B 0x004F +#define AM29F032B 0x0041 +#define AM29F002T 0x00B0 +#define AM29SL800DB 0x226B +#define AM29SL800DT 0x22EA + +/* Atmel */ +#define AT49BV512 0x0003 +#define AT29LV512 0x003d +#define AT49BV16X 0x00C0 +#define AT49BV16XT 0x00C2 +#define AT49BV32X 0x00C8 +#define AT49BV32XT 0x00C9 + +/* Eon */ +#define EN29LV400AT 0x22B9 +#define EN29LV400AB 0x22BA +#define EN29SL800BB 0x226B +#define EN29SL800BT 0x22EA + +/* Fujitsu */ +#define MBM29F040C 0x00A4 +#define MBM29F800BA 0x2258 +#define MBM29LV650UE 0x22D7 +#define MBM29LV320TE 0x22F6 +#define MBM29LV320BE 0x22F9 +#define MBM29LV160TE 0x22C4 +#define MBM29LV160BE 0x2249 +#define MBM29LV800BA 0x225B +#define MBM29LV800TA 0x22DA +#define MBM29LV400TC 0x22B9 +#define MBM29LV400BC 0x22BA + +/* Hyundai */ +#define HY29F002T 0x00B0 + +/* Intel */ +#define I28F004B3T 0x00d4 +#define I28F004B3B 0x00d5 +#define I28F400B3T 0x8894 +#define I28F400B3B 0x8895 +#define I28F008S5 0x00a6 +#define I28F016S5 0x00a0 +#define I28F008SA 0x00a2 +#define I28F008B3T 0x00d2 +#define I28F008B3B 0x00d3 +#define I28F800B3T 0x8892 +#define I28F800B3B 0x8893 +#define I28F016S3 0x00aa +#define I28F016B3T 0x00d0 +#define I28F016B3B 0x00d1 +#define I28F160B3T 0x8890 +#define I28F160B3B 0x8891 +#define I28F320B3T 0x8896 +#define I28F320B3B 0x8897 +#define I28F640B3T 0x8898 +#define I28F640B3B 0x8899 +#define I28F640C3B 0x88CD +#define I28F160F3T 0x88F3 +#define I28F160F3B 0x88F4 +#define I28F160C3T 0x88C2 +#define I28F160C3B 0x88C3 +#define I82802AB 0x00ad +#define I82802AC 0x00ac + +/* Macronix */ +#define MX29LV040C 0x004F +#define MX29LV160T 0x22C4 +#define MX29LV160B 0x2249 +#define MX29F040 0x00A4 +#define MX29F016 0x00AD +#define MX29F002T 0x00B0 +#define MX29F004T 0x0045 +#define MX29F004B 0x0046 + +/* NEC */ +#define UPD29F064115 0x221C + +/* PMC */ +#define PM49FL002 0x006D +#define PM49FL004 0x006E +#define PM49FL008 0x006A + +/* Sharp */ +#define LH28F640BF 0x00B0 + +/* ST - www.st.com */ +#define M29F800AB 0x0058 +#define M29W800DT 0x22D7 +#define M29W800DB 0x225B +#define M29W400DT 0x00EE +#define M29W400DB 0x00EF +#define M29W160DT 0x22C4 +#define M29W160DB 0x2249 +#define M29W040B 0x00E3 +#define M50FW040 0x002C +#define M50FW080 0x002D +#define M50FW016 0x002E +#define M50LPW080 0x002F +#define M50FLW080A 0x0080 +#define M50FLW080B 0x0081 +#define PSD4256G6V 0x00e9 + +/* SST */ +#define SST29EE020 0x0010 +#define SST29LE020 0x0012 +#define SST29EE512 0x005d +#define SST29LE512 0x003d +#define SST39LF800 0x2781 +#define SST39LF160 0x2782 +#define SST39VF1601 0x234b +#define SST39VF3201 0x235b +#define SST39WF1601 0x274b +#define SST39WF1602 0x274a +#define SST39LF512 0x00D4 +#define SST39LF010 0x00D5 +#define SST39LF020 0x00D6 +#define SST39LF040 0x00D7 +#define SST39SF010A 0x00B5 +#define SST39SF020A 0x00B6 +#define SST39SF040 0x00B7 +#define SST49LF004B 0x0060 +#define SST49LF040B 0x0050 +#define SST49LF008A 0x005a +#define SST49LF030A 0x001C +#define SST49LF040A 0x0051 +#define SST49LF080A 0x005B +#define SST36VF3203 0x7354 + +/* Toshiba */ +#define TC58FVT160 0x00C2 +#define TC58FVB160 0x0043 +#define TC58FVT321 0x009A +#define TC58FVB321 0x009C +#define TC58FVT641 0x0093 +#define TC58FVB641 0x0095 + +/* Winbond */ +#define W49V002A 0x00b0 + + +/* + * Unlock address sets for AMD command sets. + * Intel command sets use the MTD_UADDR_UNNECESSARY. + * Each identifier, except MTD_UADDR_UNNECESSARY, and + * MTD_UADDR_NO_SUPPORT must be defined below in unlock_addrs[]. + * MTD_UADDR_NOT_SUPPORTED must be 0 so that structure + * initialization need not require initializing all of the + * unlock addresses for all bit widths. + */ +enum uaddr { + MTD_UADDR_NOT_SUPPORTED = 0, /* data width not supported */ + MTD_UADDR_0x0555_0x02AA, + MTD_UADDR_0x0555_0x0AAA, + MTD_UADDR_0x5555_0x2AAA, + MTD_UADDR_0x0AAA_0x0554, + MTD_UADDR_0x0AAA_0x0555, + MTD_UADDR_0xAAAA_0x5555, + MTD_UADDR_DONT_CARE, /* Requires an arbitrary address */ + MTD_UADDR_UNNECESSARY, /* Does not require any address */ +}; + + +struct unlock_addr { + uint32_t addr1; + uint32_t addr2; +}; + + +/* + * I don't like the fact that the first entry in unlock_addrs[] + * exists, but is for MTD_UADDR_NOT_SUPPORTED - and, therefore, + * should not be used. The problem is that structures with + * initializers have extra fields initialized to 0. It is _very_ + * desirable to have the unlock address entries for unsupported + * data widths automatically initialized - that means that + * MTD_UADDR_NOT_SUPPORTED must be 0 and the first entry here + * must go unused. + */ +static const struct unlock_addr unlock_addrs[] = { + [MTD_UADDR_NOT_SUPPORTED] = { + .addr1 = 0xffff, + .addr2 = 0xffff + }, + + [MTD_UADDR_0x0555_0x02AA] = { + .addr1 = 0x0555, + .addr2 = 0x02aa + }, + + [MTD_UADDR_0x0555_0x0AAA] = { + .addr1 = 0x0555, + .addr2 = 0x0aaa + }, + + [MTD_UADDR_0x5555_0x2AAA] = { + .addr1 = 0x5555, + .addr2 = 0x2aaa + }, + + [MTD_UADDR_0x0AAA_0x0554] = { + .addr1 = 0x0AAA, + .addr2 = 0x0554 + }, + + [MTD_UADDR_0x0AAA_0x0555] = { + .addr1 = 0x0AAA, + .addr2 = 0x0555 + }, + + [MTD_UADDR_0xAAAA_0x5555] = { + .addr1 = 0xaaaa, + .addr2 = 0x5555 + }, + + [MTD_UADDR_DONT_CARE] = { + .addr1 = 0x0000, /* Doesn't matter which address */ + .addr2 = 0x0000 /* is used - must be last entry */ + }, + + [MTD_UADDR_UNNECESSARY] = { + .addr1 = 0x0000, + .addr2 = 0x0000 + } +}; + +struct amd_flash_info { + const char *name; + const uint16_t mfr_id; + const uint16_t dev_id; + const uint8_t dev_size; + const uint8_t nr_regions; + const uint16_t cmd_set; + const uint32_t regions[6]; + const uint8_t devtypes; /* Bitmask for x8, x16 etc. */ + const uint8_t uaddr; /* unlock addrs for 8, 16, 32, 64 */ +}; + +#define ERASEINFO(size,blocks) (size<<8)|(blocks-1) + +#define SIZE_64KiB 16 +#define SIZE_128KiB 17 +#define SIZE_256KiB 18 +#define SIZE_512KiB 19 +#define SIZE_1MiB 20 +#define SIZE_2MiB 21 +#define SIZE_4MiB 22 +#define SIZE_8MiB 23 + + +/* + * Please keep this list ordered by manufacturer! + * Fortunately, the list isn't searched often and so a + * slow, linear search isn't so bad. + */ +static const struct amd_flash_info jedec_table[] = { + { + .mfr_id = CFI_MFR_AMD, + .dev_id = AM29F032B, + .name = "AMD AM29F032B", + .uaddr = MTD_UADDR_0x0555_0x02AA, + .devtypes = CFI_DEVICETYPE_X8, + .dev_size = SIZE_4MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,64) + } + }, { + .mfr_id = CFI_MFR_AMD, + .dev_id = AM29LV160DT, + .name = "AMD AM29LV160DT", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000,31), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1) + } + }, { + .mfr_id = CFI_MFR_AMD, + .dev_id = AM29LV160DB, + .name = "AMD AM29LV160DB", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,31) + } + }, { + .mfr_id = CFI_MFR_AMD, + .dev_id = AM29LV400BB, + .name = "AMD AM29LV400BB", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,7) + } + }, { + .mfr_id = CFI_MFR_AMD, + .dev_id = AM29LV400BT, + .name = "AMD AM29LV400BT", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000,7), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1) + } + }, { + .mfr_id = CFI_MFR_AMD, + .dev_id = AM29LV800BB, + .name = "AMD AM29LV800BB", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,15), + } + }, { +/* add DL */ + .mfr_id = CFI_MFR_AMD, + .dev_id = AM29DL800BB, + .name = "AMD AM29DL800BB", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 6, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,4), + ERASEINFO(0x08000,1), + ERASEINFO(0x04000,1), + ERASEINFO(0x10000,14) + } + }, { + .mfr_id = CFI_MFR_AMD, + .dev_id = AM29DL800BT, + .name = "AMD AM29DL800BT", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 6, + .regions = { + ERASEINFO(0x10000,14), + ERASEINFO(0x04000,1), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,4), + ERASEINFO(0x08000,1), + ERASEINFO(0x04000,1) + } + }, { + .mfr_id = CFI_MFR_AMD, + .dev_id = AM29F800BB, + .name = "AMD AM29F800BB", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,15), + } + }, { + .mfr_id = CFI_MFR_AMD, + .dev_id = AM29LV800BT, + .name = "AMD AM29LV800BT", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000,15), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1) + } + }, { + .mfr_id = CFI_MFR_AMD, + .dev_id = AM29F800BT, + .name = "AMD AM29F800BT", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000,15), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1) + } + }, { + .mfr_id = CFI_MFR_AMD, + .dev_id = AM29F017D, + .name = "AMD AM29F017D", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_DONT_CARE, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,32), + } + }, { + .mfr_id = CFI_MFR_AMD, + .dev_id = AM29F016D, + .name = "AMD AM29F016D", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0555_0x02AA, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,32), + } + }, { + .mfr_id = CFI_MFR_AMD, + .dev_id = AM29F080, + .name = "AMD AM29F080", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0555_0x02AA, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,16), + } + }, { + .mfr_id = CFI_MFR_AMD, + .dev_id = AM29F040, + .name = "AMD AM29F040", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0555_0x02AA, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,8), + } + }, { + .mfr_id = CFI_MFR_AMD, + .dev_id = AM29LV040B, + .name = "AMD AM29LV040B", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0555_0x02AA, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,8), + } + }, { + .mfr_id = CFI_MFR_AMD, + .dev_id = AM29F002T, + .name = "AMD AM29F002T", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0555_0x02AA, + .dev_size = SIZE_256KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000,3), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1), + } + }, { + .mfr_id = CFI_MFR_AMD, + .dev_id = AM29SL800DT, + .name = "AMD AM29SL800DT", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000,15), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1), + } + }, { + .mfr_id = CFI_MFR_AMD, + .dev_id = AM29SL800DB, + .name = "AMD AM29SL800DB", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,15), + } + }, { + .mfr_id = CFI_MFR_ATMEL, + .dev_id = AT49BV512, + .name = "Atmel AT49BV512", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_64KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,1) + } + }, { + .mfr_id = CFI_MFR_ATMEL, + .dev_id = AT29LV512, + .name = "Atmel AT29LV512", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_64KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x80,256), + ERASEINFO(0x80,256) + } + }, { + .mfr_id = CFI_MFR_ATMEL, + .dev_id = AT49BV16X, + .name = "Atmel AT49BV16X", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0555_0x0AAA, /* ???? */ + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x02000,8), + ERASEINFO(0x10000,31) + } + }, { + .mfr_id = CFI_MFR_ATMEL, + .dev_id = AT49BV16XT, + .name = "Atmel AT49BV16XT", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0555_0x0AAA, /* ???? */ + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x10000,31), + ERASEINFO(0x02000,8) + } + }, { + .mfr_id = CFI_MFR_ATMEL, + .dev_id = AT49BV32X, + .name = "Atmel AT49BV32X", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0555_0x0AAA, /* ???? */ + .dev_size = SIZE_4MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x02000,8), + ERASEINFO(0x10000,63) + } + }, { + .mfr_id = CFI_MFR_ATMEL, + .dev_id = AT49BV32XT, + .name = "Atmel AT49BV32XT", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0555_0x0AAA, /* ???? */ + .dev_size = SIZE_4MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x10000,63), + ERASEINFO(0x02000,8) + } + }, { + .mfr_id = CFI_MFR_EON, + .dev_id = EN29LV400AT, + .name = "Eon EN29LV400AT", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000,7), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1), + } + }, { + .mfr_id = CFI_MFR_EON, + .dev_id = EN29LV400AB, + .name = "Eon EN29LV400AB", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,7), + } + }, { + .mfr_id = CFI_MFR_EON, + .dev_id = EN29SL800BT, + .name = "Eon EN29SL800BT", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000,15), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1), + } + }, { + .mfr_id = CFI_MFR_EON, + .dev_id = EN29SL800BB, + .name = "Eon EN29SL800BB", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,15), + } + }, { + .mfr_id = CFI_MFR_FUJITSU, + .dev_id = MBM29F040C, + .name = "Fujitsu MBM29F040C", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,8) + } + }, { + .mfr_id = CFI_MFR_FUJITSU, + .dev_id = MBM29F800BA, + .name = "Fujitsu MBM29F800BA", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,15), + } + }, { + .mfr_id = CFI_MFR_FUJITSU, + .dev_id = MBM29LV650UE, + .name = "Fujitsu MBM29LV650UE", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_DONT_CARE, + .dev_size = SIZE_8MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,128) + } + }, { + .mfr_id = CFI_MFR_FUJITSU, + .dev_id = MBM29LV320TE, + .name = "Fujitsu MBM29LV320TE", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_4MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x10000,63), + ERASEINFO(0x02000,8) + } + }, { + .mfr_id = CFI_MFR_FUJITSU, + .dev_id = MBM29LV320BE, + .name = "Fujitsu MBM29LV320BE", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_4MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x02000,8), + ERASEINFO(0x10000,63) + } + }, { + .mfr_id = CFI_MFR_FUJITSU, + .dev_id = MBM29LV160TE, + .name = "Fujitsu MBM29LV160TE", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000,31), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1) + } + }, { + .mfr_id = CFI_MFR_FUJITSU, + .dev_id = MBM29LV160BE, + .name = "Fujitsu MBM29LV160BE", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,31) + } + }, { + .mfr_id = CFI_MFR_FUJITSU, + .dev_id = MBM29LV800BA, + .name = "Fujitsu MBM29LV800BA", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,15) + } + }, { + .mfr_id = CFI_MFR_FUJITSU, + .dev_id = MBM29LV800TA, + .name = "Fujitsu MBM29LV800TA", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000,15), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1) + } + }, { + .mfr_id = CFI_MFR_FUJITSU, + .dev_id = MBM29LV400BC, + .name = "Fujitsu MBM29LV400BC", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,7) + } + }, { + .mfr_id = CFI_MFR_FUJITSU, + .dev_id = MBM29LV400TC, + .name = "Fujitsu MBM29LV400TC", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000,7), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1) + } + }, { + .mfr_id = CFI_MFR_HYUNDAI, + .dev_id = HY29F002T, + .name = "Hyundai HY29F002T", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0555_0x02AA, + .dev_size = SIZE_256KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000,3), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F004B3B, + .name = "Intel 28F004B3B", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x02000, 8), + ERASEINFO(0x10000, 7), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F004B3T, + .name = "Intel 28F004B3T", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x10000, 7), + ERASEINFO(0x02000, 8), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F400B3B, + .name = "Intel 28F400B3B", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x02000, 8), + ERASEINFO(0x10000, 7), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F400B3T, + .name = "Intel 28F400B3T", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x10000, 7), + ERASEINFO(0x02000, 8), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F008B3B, + .name = "Intel 28F008B3B", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x02000, 8), + ERASEINFO(0x10000, 15), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F008B3T, + .name = "Intel 28F008B3T", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x10000, 15), + ERASEINFO(0x02000, 8), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F008S5, + .name = "Intel 28F008S5", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_INTEL_EXT, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,16), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F016S5, + .name = "Intel 28F016S5", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_INTEL_EXT, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,32), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F008SA, + .name = "Intel 28F008SA", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000, 16), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F800B3B, + .name = "Intel 28F800B3B", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x02000, 8), + ERASEINFO(0x10000, 15), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F800B3T, + .name = "Intel 28F800B3T", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x10000, 15), + ERASEINFO(0x02000, 8), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F016B3B, + .name = "Intel 28F016B3B", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x02000, 8), + ERASEINFO(0x10000, 31), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F016S3, + .name = "Intel I28F016S3", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000, 32), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F016B3T, + .name = "Intel 28F016B3T", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x10000, 31), + ERASEINFO(0x02000, 8), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F160B3B, + .name = "Intel 28F160B3B", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x02000, 8), + ERASEINFO(0x10000, 31), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F160B3T, + .name = "Intel 28F160B3T", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x10000, 31), + ERASEINFO(0x02000, 8), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F320B3B, + .name = "Intel 28F320B3B", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_4MiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x02000, 8), + ERASEINFO(0x10000, 63), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F320B3T, + .name = "Intel 28F320B3T", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_4MiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x10000, 63), + ERASEINFO(0x02000, 8), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F640B3B, + .name = "Intel 28F640B3B", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_8MiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x02000, 8), + ERASEINFO(0x10000, 127), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F640B3T, + .name = "Intel 28F640B3T", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_8MiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x10000, 127), + ERASEINFO(0x02000, 8), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I28F640C3B, + .name = "Intel 28F640C3B", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_8MiB, + .cmd_set = P_ID_INTEL_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x02000, 8), + ERASEINFO(0x10000, 127), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I82802AB, + .name = "Intel 82802AB", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_INTEL_EXT, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,8), + } + }, { + .mfr_id = CFI_MFR_INTEL, + .dev_id = I82802AC, + .name = "Intel 82802AC", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_INTEL_EXT, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,16), + } + }, { + .mfr_id = CFI_MFR_MACRONIX, + .dev_id = MX29LV040C, + .name = "Macronix MX29LV040C", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0555_0x02AA, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,8), + } + }, { + .mfr_id = CFI_MFR_MACRONIX, + .dev_id = MX29LV160T, + .name = "MXIC MX29LV160T", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000,31), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1) + } + }, { + .mfr_id = CFI_MFR_NEC, + .dev_id = UPD29F064115, + .name = "NEC uPD29F064115", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_0xAAAA_0x5555, + .dev_size = SIZE_8MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 3, + .regions = { + ERASEINFO(0x2000,8), + ERASEINFO(0x10000,126), + ERASEINFO(0x2000,8), + } + }, { + .mfr_id = CFI_MFR_MACRONIX, + .dev_id = MX29LV160B, + .name = "MXIC MX29LV160B", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,31) + } + }, { + .mfr_id = CFI_MFR_MACRONIX, + .dev_id = MX29F040, + .name = "Macronix MX29F040", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0555_0x02AA, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,8), + } + }, { + .mfr_id = CFI_MFR_MACRONIX, + .dev_id = MX29F016, + .name = "Macronix MX29F016", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0555_0x02AA, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,32), + } + }, { + .mfr_id = CFI_MFR_MACRONIX, + .dev_id = MX29F004T, + .name = "Macronix MX29F004T", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0555_0x02AA, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000,7), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1), + } + }, { + .mfr_id = CFI_MFR_MACRONIX, + .dev_id = MX29F004B, + .name = "Macronix MX29F004B", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0555_0x02AA, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,7), + } + }, { + .mfr_id = CFI_MFR_MACRONIX, + .dev_id = MX29F002T, + .name = "Macronix MX29F002T", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0555_0x02AA, + .dev_size = SIZE_256KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000,3), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1), + } + }, { + .mfr_id = CFI_MFR_PMC, + .dev_id = PM49FL002, + .name = "PMC Pm49FL002", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_256KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO( 0x01000, 64 ) + } + }, { + .mfr_id = CFI_MFR_PMC, + .dev_id = PM49FL004, + .name = "PMC Pm49FL004", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO( 0x01000, 128 ) + } + }, { + .mfr_id = CFI_MFR_PMC, + .dev_id = PM49FL008, + .name = "PMC Pm49FL008", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO( 0x01000, 256 ) + } + }, { + .mfr_id = CFI_MFR_SHARP, + .dev_id = LH28F640BF, + .name = "LH28F640BF", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_8MiB, + .cmd_set = P_ID_INTEL_EXT, + .nr_regions = 2, + .regions = { + ERASEINFO(0x10000, 127), + ERASEINFO(0x02000, 8), + } + }, { + .mfr_id = CFI_MFR_SST, + .dev_id = SST39LF512, + .name = "SST 39LF512", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_64KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x01000,16), + } + }, { + .mfr_id = CFI_MFR_SST, + .dev_id = SST39LF010, + .name = "SST 39LF010", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_128KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x01000,32), + } + }, { + .mfr_id = CFI_MFR_SST, + .dev_id = SST29EE020, + .name = "SST 29EE020", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_256KiB, + .cmd_set = P_ID_SST_PAGE, + .nr_regions = 1, + .regions = {ERASEINFO(0x01000,64), + } + }, { + .mfr_id = CFI_MFR_SST, + .dev_id = SST29LE020, + .name = "SST 29LE020", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_256KiB, + .cmd_set = P_ID_SST_PAGE, + .nr_regions = 1, + .regions = {ERASEINFO(0x01000,64), + } + }, { + .mfr_id = CFI_MFR_SST, + .dev_id = SST39LF020, + .name = "SST 39LF020", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_256KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x01000,64), + } + }, { + .mfr_id = CFI_MFR_SST, + .dev_id = SST39LF040, + .name = "SST 39LF040", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x01000,128), + } + }, { + .mfr_id = CFI_MFR_SST, + .dev_id = SST39SF010A, + .name = "SST 39SF010A", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_128KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x01000,32), + } + }, { + .mfr_id = CFI_MFR_SST, + .dev_id = SST39SF020A, + .name = "SST 39SF020A", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_256KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x01000,64), + } + }, { + .mfr_id = CFI_MFR_SST, + .dev_id = SST39SF040, + .name = "SST 39SF040", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x01000,128), + } + }, { + .mfr_id = CFI_MFR_SST, + .dev_id = SST49LF040B, + .name = "SST 49LF040B", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x01000,128), + } + }, { + + .mfr_id = CFI_MFR_SST, + .dev_id = SST49LF004B, + .name = "SST 49LF004B", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x01000,128), + } + }, { + .mfr_id = CFI_MFR_SST, + .dev_id = SST49LF008A, + .name = "SST 49LF008A", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x01000,256), + } + }, { + .mfr_id = CFI_MFR_SST, + .dev_id = SST49LF030A, + .name = "SST 49LF030A", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x01000,96), + } + }, { + .mfr_id = CFI_MFR_SST, + .dev_id = SST49LF040A, + .name = "SST 49LF040A", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x01000,128), + } + }, { + .mfr_id = CFI_MFR_SST, + .dev_id = SST49LF080A, + .name = "SST 49LF080A", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x01000,256), + } + }, { + .mfr_id = CFI_MFR_SST, /* should be CFI */ + .dev_id = SST39LF160, + .name = "SST 39LF160", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_0xAAAA_0x5555, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x1000,256), + ERASEINFO(0x1000,256) + } + }, { + .mfr_id = CFI_MFR_SST, /* should be CFI */ + .dev_id = SST39VF1601, + .name = "SST 39VF1601", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_0xAAAA_0x5555, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x1000,256), + ERASEINFO(0x1000,256) + } + }, { + /* CFI is broken: reports AMD_STD, but needs custom uaddr */ + .mfr_id = CFI_MFR_SST, + .dev_id = SST39WF1601, + .name = "SST 39WF1601", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_0xAAAA_0x5555, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x1000,256), + ERASEINFO(0x1000,256) + } + }, { + /* CFI is broken: reports AMD_STD, but needs custom uaddr */ + .mfr_id = CFI_MFR_SST, + .dev_id = SST39WF1602, + .name = "SST 39WF1602", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_0xAAAA_0x5555, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x1000,256), + ERASEINFO(0x1000,256) + } + }, { + .mfr_id = CFI_MFR_SST, /* should be CFI */ + .dev_id = SST39VF3201, + .name = "SST 39VF3201", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_0xAAAA_0x5555, + .dev_size = SIZE_4MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x1000,256), + ERASEINFO(0x1000,256), + ERASEINFO(0x1000,256), + ERASEINFO(0x1000,256) + } + }, { + .mfr_id = CFI_MFR_SST, + .dev_id = SST36VF3203, + .name = "SST 36VF3203", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_4MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,64), + } + }, { + .mfr_id = CFI_MFR_ST, + .dev_id = M29F800AB, + .name = "ST M29F800AB", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,15), + } + }, { + .mfr_id = CFI_MFR_ST, /* FIXME - CFI device? */ + .dev_id = M29W800DT, + .name = "ST M29W800DT", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000,15), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1) + } + }, { + .mfr_id = CFI_MFR_ST, /* FIXME - CFI device? */ + .dev_id = M29W800DB, + .name = "ST M29W800DB", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,15) + } + }, { + .mfr_id = CFI_MFR_ST, + .dev_id = M29W400DT, + .name = "ST M29W400DT", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,7), + ERASEINFO(0x02000,1), + ERASEINFO(0x08000,2), + ERASEINFO(0x10000,1) + } + }, { + .mfr_id = CFI_MFR_ST, + .dev_id = M29W400DB, + .name = "ST M29W400DB", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,7) + } + }, { + .mfr_id = CFI_MFR_ST, /* FIXME - CFI device? */ + .dev_id = M29W160DT, + .name = "ST M29W160DT", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0555_0x02AA, /* ???? */ + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000,31), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1) + } + }, { + .mfr_id = CFI_MFR_ST, /* FIXME - CFI device? */ + .dev_id = M29W160DB, + .name = "ST M29W160DB", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0555_0x02AA, /* ???? */ + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,31) + } + }, { + .mfr_id = CFI_MFR_ST, + .dev_id = M29W040B, + .name = "ST M29W040B", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0555_0x02AA, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,8), + } + }, { + .mfr_id = CFI_MFR_ST, + .dev_id = M50FW040, + .name = "ST M50FW040", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_512KiB, + .cmd_set = P_ID_INTEL_EXT, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,8), + } + }, { + .mfr_id = CFI_MFR_ST, + .dev_id = M50FW080, + .name = "ST M50FW080", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_INTEL_EXT, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,16), + } + }, { + .mfr_id = CFI_MFR_ST, + .dev_id = M50FW016, + .name = "ST M50FW016", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_INTEL_EXT, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,32), + } + }, { + .mfr_id = CFI_MFR_ST, + .dev_id = M50LPW080, + .name = "ST M50LPW080", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_INTEL_EXT, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,16), + }, + }, { + .mfr_id = CFI_MFR_ST, + .dev_id = M50FLW080A, + .name = "ST M50FLW080A", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_INTEL_EXT, + .nr_regions = 4, + .regions = { + ERASEINFO(0x1000,16), + ERASEINFO(0x10000,13), + ERASEINFO(0x1000,16), + ERASEINFO(0x1000,16), + } + }, { + .mfr_id = CFI_MFR_ST, + .dev_id = M50FLW080B, + .name = "ST M50FLW080B", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_UNNECESSARY, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_INTEL_EXT, + .nr_regions = 4, + .regions = { + ERASEINFO(0x1000,16), + ERASEINFO(0x1000,16), + ERASEINFO(0x10000,13), + ERASEINFO(0x1000,16), + } + }, { + .mfr_id = 0xff00 | CFI_MFR_ST, + .dev_id = 0xff00 | PSD4256G6V, + .name = "ST PSD4256G6V", + .devtypes = CFI_DEVICETYPE_X16, + .uaddr = MTD_UADDR_0x0AAA_0x0554, + .dev_size = SIZE_1MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 1, + .regions = { + ERASEINFO(0x10000,16), + } + }, { + .mfr_id = CFI_MFR_TOSHIBA, + .dev_id = TC58FVT160, + .name = "Toshiba TC58FVT160", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000,31), + ERASEINFO(0x08000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1) + } + }, { + .mfr_id = CFI_MFR_TOSHIBA, + .dev_id = TC58FVB160, + .name = "Toshiba TC58FVB160", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_2MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,31) + } + }, { + .mfr_id = CFI_MFR_TOSHIBA, + .dev_id = TC58FVB321, + .name = "Toshiba TC58FVB321", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_4MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x02000,8), + ERASEINFO(0x10000,63) + } + }, { + .mfr_id = CFI_MFR_TOSHIBA, + .dev_id = TC58FVT321, + .name = "Toshiba TC58FVT321", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_4MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x10000,63), + ERASEINFO(0x02000,8) + } + }, { + .mfr_id = CFI_MFR_TOSHIBA, + .dev_id = TC58FVB641, + .name = "Toshiba TC58FVB641", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_8MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x02000,8), + ERASEINFO(0x10000,127) + } + }, { + .mfr_id = CFI_MFR_TOSHIBA, + .dev_id = TC58FVT641, + .name = "Toshiba TC58FVT641", + .devtypes = CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x0AAA_0x0555, + .dev_size = SIZE_8MiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 2, + .regions = { + ERASEINFO(0x10000,127), + ERASEINFO(0x02000,8) + } + }, { + .mfr_id = CFI_MFR_WINBOND, + .dev_id = W49V002A, + .name = "Winbond W49V002A", + .devtypes = CFI_DEVICETYPE_X8, + .uaddr = MTD_UADDR_0x5555_0x2AAA, + .dev_size = SIZE_256KiB, + .cmd_set = P_ID_AMD_STD, + .nr_regions = 4, + .regions = { + ERASEINFO(0x10000, 3), + ERASEINFO(0x08000, 1), + ERASEINFO(0x02000, 2), + ERASEINFO(0x04000, 1), + } + } +}; + +static inline u32 jedec_read_mfr(struct map_info *map, uint32_t base, + struct cfi_private *cfi) +{ + map_word result; + unsigned long mask; + int bank = 0; + + /* According to JEDEC "Standard Manufacturer's Identification Code" + * (http://www.jedec.org/download/search/jep106W.pdf) + * several first banks can contain 0x7f instead of actual ID + */ + do { + uint32_t ofs = cfi_build_cmd_addr(0 + (bank << 8), map, cfi); + mask = (1 << (cfi->device_type * 8)) - 1; + if (ofs >= map->size) + return 0; + result = map_read(map, base + ofs); + bank++; + } while ((result.x[0] & mask) == CFI_MFR_CONTINUATION); + + return result.x[0] & mask; +} + +static inline u32 jedec_read_id(struct map_info *map, uint32_t base, + struct cfi_private *cfi) +{ + map_word result; + unsigned long mask; + u32 ofs = cfi_build_cmd_addr(1, map, cfi); + mask = (1 << (cfi->device_type * 8)) -1; + result = map_read(map, base + ofs); + return result.x[0] & mask; +} + +static void jedec_reset(u32 base, struct map_info *map, struct cfi_private *cfi) +{ + /* Reset */ + + /* after checking the datasheets for SST, MACRONIX and ATMEL + * (oh and incidentaly the jedec spec - 3.5.3.3) the reset + * sequence is *supposed* to be 0xaa at 0x5555, 0x55 at + * 0x2aaa, 0xF0 at 0x5555 this will not affect the AMD chips + * as they will ignore the writes and don't care what address + * the F0 is written to */ + if (cfi->addr_unlock1) { + pr_debug( "reset unlock called %x %x \n", + cfi->addr_unlock1,cfi->addr_unlock2); + cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL); + } + + cfi_send_gen_cmd(0xF0, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL); + /* Some misdesigned Intel chips do not respond for 0xF0 for a reset, + * so ensure we're in read mode. Send both the Intel and the AMD command + * for this. Intel uses 0xff for this, AMD uses 0xff for NOP, so + * this should be safe. + */ + cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL); + /* FIXME - should have reset delay before continuing */ +} + + +static int cfi_jedec_setup(struct map_info *map, struct cfi_private *cfi, int index) +{ + int i,num_erase_regions; + uint8_t uaddr; + + if (!(jedec_table[index].devtypes & cfi->device_type)) { + pr_debug("Rejecting potential %s with incompatible %d-bit device type\n", + jedec_table[index].name, 4 * (1<<cfi->device_type)); + return 0; + } + + printk(KERN_INFO "Found: %s\n",jedec_table[index].name); + + num_erase_regions = jedec_table[index].nr_regions; + + cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL); + if (!cfi->cfiq) { + //xx printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name); + return 0; + } + + memset(cfi->cfiq, 0, sizeof(struct cfi_ident)); + + cfi->cfiq->P_ID = jedec_table[index].cmd_set; + cfi->cfiq->NumEraseRegions = jedec_table[index].nr_regions; + cfi->cfiq->DevSize = jedec_table[index].dev_size; + cfi->cfi_mode = CFI_MODE_JEDEC; + cfi->sector_erase_cmd = CMD(0x30); + + for (i=0; i<num_erase_regions; i++){ + cfi->cfiq->EraseRegionInfo[i] = jedec_table[index].regions[i]; + } + cfi->cmdset_priv = NULL; + + /* This may be redundant for some cases, but it doesn't hurt */ + cfi->mfr = jedec_table[index].mfr_id; + cfi->id = jedec_table[index].dev_id; + + uaddr = jedec_table[index].uaddr; + + /* The table has unlock addresses in _bytes_, and we try not to let + our brains explode when we see the datasheets talking about address + lines numbered from A-1 to A18. The CFI table has unlock addresses + in device-words according to the mode the device is connected in */ + cfi->addr_unlock1 = unlock_addrs[uaddr].addr1 / cfi->device_type; + cfi->addr_unlock2 = unlock_addrs[uaddr].addr2 / cfi->device_type; + + return 1; /* ok */ +} + + +/* + * There is a BIG problem properly ID'ing the JEDEC device and guaranteeing + * the mapped address, unlock addresses, and proper chip ID. This function + * attempts to minimize errors. It is doubtfull that this probe will ever + * be perfect - consequently there should be some module parameters that + * could be manually specified to force the chip info. + */ +static inline int jedec_match( uint32_t base, + struct map_info *map, + struct cfi_private *cfi, + const struct amd_flash_info *finfo ) +{ + int rc = 0; /* failure until all tests pass */ + u32 mfr, id; + uint8_t uaddr; + + /* + * The IDs must match. For X16 and X32 devices operating in + * a lower width ( X8 or X16 ), the device ID's are usually just + * the lower byte(s) of the larger device ID for wider mode. If + * a part is found that doesn't fit this assumption (device id for + * smaller width mode is completely unrealated to full-width mode) + * then the jedec_table[] will have to be augmented with the IDs + * for different widths. + */ + switch (cfi->device_type) { + case CFI_DEVICETYPE_X8: + mfr = (uint8_t)finfo->mfr_id; + id = (uint8_t)finfo->dev_id; + + /* bjd: it seems that if we do this, we can end up + * detecting 16bit flashes as an 8bit device, even though + * there aren't. + */ + if (finfo->dev_id > 0xff) { + pr_debug("%s(): ID is not 8bit\n", + __func__); + goto match_done; + } + break; + case CFI_DEVICETYPE_X16: + mfr = (uint16_t)finfo->mfr_id; + id = (uint16_t)finfo->dev_id; + break; + case CFI_DEVICETYPE_X32: + mfr = (uint16_t)finfo->mfr_id; + id = (uint32_t)finfo->dev_id; + break; + default: + printk(KERN_WARNING + "MTD %s(): Unsupported device type %d\n", + __func__, cfi->device_type); + goto match_done; + } + if ( cfi->mfr != mfr || cfi->id != id ) { + goto match_done; + } + + /* the part size must fit in the memory window */ + pr_debug("MTD %s(): Check fit 0x%.8x + 0x%.8x = 0x%.8x\n", + __func__, base, 1 << finfo->dev_size, base + (1 << finfo->dev_size) ); + if ( base + cfi_interleave(cfi) * ( 1 << finfo->dev_size ) > map->size ) { + pr_debug("MTD %s(): 0x%.4x 0x%.4x %dKiB doesn't fit\n", + __func__, finfo->mfr_id, finfo->dev_id, + 1 << finfo->dev_size ); + goto match_done; + } + + if (! (finfo->devtypes & cfi->device_type)) + goto match_done; + + uaddr = finfo->uaddr; + + pr_debug("MTD %s(): check unlock addrs 0x%.4x 0x%.4x\n", + __func__, cfi->addr_unlock1, cfi->addr_unlock2 ); + if ( MTD_UADDR_UNNECESSARY != uaddr && MTD_UADDR_DONT_CARE != uaddr + && ( unlock_addrs[uaddr].addr1 / cfi->device_type != cfi->addr_unlock1 || + unlock_addrs[uaddr].addr2 / cfi->device_type != cfi->addr_unlock2 ) ) { + pr_debug("MTD %s(): 0x%.4x 0x%.4x did not match\n", + __func__, + unlock_addrs[uaddr].addr1, + unlock_addrs[uaddr].addr2); + goto match_done; + } + + /* + * Make sure the ID's disappear when the device is taken out of + * ID mode. The only time this should fail when it should succeed + * is when the ID's are written as data to the same + * addresses. For this rare and unfortunate case the chip + * cannot be probed correctly. + * FIXME - write a driver that takes all of the chip info as + * module parameters, doesn't probe but forces a load. + */ + pr_debug("MTD %s(): check ID's disappear when not in ID mode\n", + __func__ ); + jedec_reset( base, map, cfi ); + mfr = jedec_read_mfr( map, base, cfi ); + id = jedec_read_id( map, base, cfi ); + if ( mfr == cfi->mfr && id == cfi->id ) { + pr_debug("MTD %s(): ID 0x%.2x:0x%.2x did not change after reset:\n" + "You might need to manually specify JEDEC parameters.\n", + __func__, cfi->mfr, cfi->id ); + goto match_done; + } + + /* all tests passed - mark as success */ + rc = 1; + + /* + * Put the device back in ID mode - only need to do this if we + * were truly frobbing a real device. + */ + pr_debug("MTD %s(): return to ID mode\n", __func__ ); + if (cfi->addr_unlock1) { + cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL); + } + cfi_send_gen_cmd(0x90, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL); + /* FIXME - should have a delay before continuing */ + + match_done: + return rc; +} + + +static int jedec_probe_chip(struct map_info *map, __u32 base, + unsigned long *chip_map, struct cfi_private *cfi) +{ + int i; + enum uaddr uaddr_idx = MTD_UADDR_NOT_SUPPORTED; + u32 probe_offset1, probe_offset2; + + retry: + if (!cfi->numchips) { + uaddr_idx++; + + if (MTD_UADDR_UNNECESSARY == uaddr_idx) + return 0; + + cfi->addr_unlock1 = unlock_addrs[uaddr_idx].addr1 / cfi->device_type; + cfi->addr_unlock2 = unlock_addrs[uaddr_idx].addr2 / cfi->device_type; + } + + /* Make certain we aren't probing past the end of map */ + if (base >= map->size) { + printk(KERN_NOTICE + "Probe at base(0x%08x) past the end of the map(0x%08lx)\n", + base, map->size -1); + return 0; + + } + /* Ensure the unlock addresses we try stay inside the map */ + probe_offset1 = cfi_build_cmd_addr(cfi->addr_unlock1, map, cfi); + probe_offset2 = cfi_build_cmd_addr(cfi->addr_unlock2, map, cfi); + if ( ((base + probe_offset1 + map_bankwidth(map)) >= map->size) || + ((base + probe_offset2 + map_bankwidth(map)) >= map->size)) + goto retry; + + /* Reset */ + jedec_reset(base, map, cfi); + + /* Autoselect Mode */ + if(cfi->addr_unlock1) { + cfi_send_gen_cmd(0xaa, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, base, map, cfi, cfi->device_type, NULL); + } + cfi_send_gen_cmd(0x90, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL); + /* FIXME - should have a delay before continuing */ + + if (!cfi->numchips) { + /* This is the first time we're called. Set up the CFI + stuff accordingly and return */ + + cfi->mfr = jedec_read_mfr(map, base, cfi); + cfi->id = jedec_read_id(map, base, cfi); + pr_debug("Search for id:(%02x %02x) interleave(%d) type(%d)\n", + cfi->mfr, cfi->id, cfi_interleave(cfi), cfi->device_type); + for (i = 0; i < ARRAY_SIZE(jedec_table); i++) { + if ( jedec_match( base, map, cfi, &jedec_table[i] ) ) { + pr_debug("MTD %s(): matched device 0x%x,0x%x unlock_addrs: 0x%.4x 0x%.4x\n", + __func__, cfi->mfr, cfi->id, + cfi->addr_unlock1, cfi->addr_unlock2 ); + if (!cfi_jedec_setup(map, cfi, i)) + return 0; + goto ok_out; + } + } + goto retry; + } else { + uint16_t mfr; + uint16_t id; + + /* Make sure it is a chip of the same manufacturer and id */ + mfr = jedec_read_mfr(map, base, cfi); + id = jedec_read_id(map, base, cfi); + + if ((mfr != cfi->mfr) || (id != cfi->id)) { + printk(KERN_DEBUG "%s: Found different chip or no chip at all (mfr 0x%x, id 0x%x) at 0x%x\n", + map->name, mfr, id, base); + jedec_reset(base, map, cfi); + return 0; + } + } + + /* Check each previous chip locations to see if it's an alias */ + for (i=0; i < (base >> cfi->chipshift); i++) { + unsigned long start; + if(!test_bit(i, chip_map)) { + continue; /* Skip location; no valid chip at this address */ + } + start = i << cfi->chipshift; + if (jedec_read_mfr(map, start, cfi) == cfi->mfr && + jedec_read_id(map, start, cfi) == cfi->id) { + /* Eep. This chip also looks like it's in autoselect mode. + Is it an alias for the new one? */ + jedec_reset(start, map, cfi); + + /* If the device IDs go away, it's an alias */ + if (jedec_read_mfr(map, base, cfi) != cfi->mfr || + jedec_read_id(map, base, cfi) != cfi->id) { + printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n", + map->name, base, start); + return 0; + } + + /* Yes, it's actually got the device IDs as data. Most + * unfortunate. Stick the new chip in read mode + * too and if it's the same, assume it's an alias. */ + /* FIXME: Use other modes to do a proper check */ + jedec_reset(base, map, cfi); + if (jedec_read_mfr(map, base, cfi) == cfi->mfr && + jedec_read_id(map, base, cfi) == cfi->id) { + printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n", + map->name, base, start); + return 0; + } + } + } + + /* OK, if we got to here, then none of the previous chips appear to + be aliases for the current one. */ + set_bit((base >> cfi->chipshift), chip_map); /* Update chip map */ + cfi->numchips++; + +ok_out: + /* Put it back into Read Mode */ + jedec_reset(base, map, cfi); + + printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n", + map->name, cfi_interleave(cfi), cfi->device_type*8, base, + map->bankwidth*8); + + return 1; +} + +static struct chip_probe jedec_chip_probe = { + .name = "JEDEC", + .probe_chip = jedec_probe_chip +}; + +static struct mtd_info *jedec_probe(struct map_info *map) +{ + /* + * Just use the generic probe stuff to call our CFI-specific + * chip_probe routine in all the possible permutations, etc. + */ + return mtd_do_chip_probe(map, &jedec_chip_probe); +} + +static struct mtd_chip_driver jedec_chipdrv = { + .probe = jedec_probe, + .name = "jedec_probe", + .module = THIS_MODULE +}; + +static int __init jedec_probe_init(void) +{ + register_mtd_chip_driver(&jedec_chipdrv); + return 0; +} + +static void __exit jedec_probe_exit(void) +{ + unregister_mtd_chip_driver(&jedec_chipdrv); +} + +module_init(jedec_probe_init); +module_exit(jedec_probe_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Erwin Authried <eauth@softsys.co.at> et al."); +MODULE_DESCRIPTION("Probe code for JEDEC-compliant flash chips"); diff --git a/drivers/mtd/chips/map_absent.c b/drivers/mtd/chips/map_absent.c new file mode 100644 index 000000000..fc68557f4 --- /dev/null +++ b/drivers/mtd/chips/map_absent.c @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Common code to handle absent "placeholder" devices + * Copyright 2001 Resilience Corporation <ebrower@resilience.com> + * + * This map driver is used to allocate "placeholder" MTD + * devices on systems that have socketed/removable media. + * Use of this driver as a fallback preserves the expected + * registration of MTD device nodes regardless of probe outcome. + * A usage example is as follows: + * + * my_dev[i] = do_map_probe("cfi", &my_map[i]); + * if(NULL == my_dev[i]) { + * my_dev[i] = do_map_probe("map_absent", &my_map[i]); + * } + * + * Any device 'probed' with this driver will return -ENODEV + * upon open. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> + +static int map_absent_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); +static int map_absent_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *); +static int map_absent_erase (struct mtd_info *, struct erase_info *); +static void map_absent_sync (struct mtd_info *); +static struct mtd_info *map_absent_probe(struct map_info *map); +static void map_absent_destroy (struct mtd_info *); + + +static struct mtd_chip_driver map_absent_chipdrv = { + .probe = map_absent_probe, + .destroy = map_absent_destroy, + .name = "map_absent", + .module = THIS_MODULE +}; + +static struct mtd_info *map_absent_probe(struct map_info *map) +{ + struct mtd_info *mtd; + + mtd = kzalloc(sizeof(*mtd), GFP_KERNEL); + if (!mtd) { + return NULL; + } + + map->fldrv = &map_absent_chipdrv; + mtd->priv = map; + mtd->name = map->name; + mtd->type = MTD_ABSENT; + mtd->size = map->size; + mtd->_erase = map_absent_erase; + mtd->_read = map_absent_read; + mtd->_write = map_absent_write; + mtd->_sync = map_absent_sync; + mtd->flags = 0; + mtd->erasesize = PAGE_SIZE; + mtd->writesize = 1; + + __module_get(THIS_MODULE); + return mtd; +} + + +static int map_absent_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) +{ + return -ENODEV; +} + +static int map_absent_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) +{ + return -ENODEV; +} + +static int map_absent_erase(struct mtd_info *mtd, struct erase_info *instr) +{ + return -ENODEV; +} + +static void map_absent_sync(struct mtd_info *mtd) +{ + /* nop */ +} + +static void map_absent_destroy(struct mtd_info *mtd) +{ + /* nop */ +} + +static int __init map_absent_init(void) +{ + register_mtd_chip_driver(&map_absent_chipdrv); + return 0; +} + +static void __exit map_absent_exit(void) +{ + unregister_mtd_chip_driver(&map_absent_chipdrv); +} + +module_init(map_absent_init); +module_exit(map_absent_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Resilience Corporation - Eric Brower <ebrower@resilience.com>"); +MODULE_DESCRIPTION("Placeholder MTD chip driver for 'absent' chips"); diff --git a/drivers/mtd/chips/map_ram.c b/drivers/mtd/chips/map_ram.c new file mode 100644 index 000000000..c37fce926 --- /dev/null +++ b/drivers/mtd/chips/map_ram.c @@ -0,0 +1,158 @@ +/* + * Common code to handle map devices which are simple RAM + * (C) 2000 Red Hat. GPL'd. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <asm/io.h> +#include <asm/byteorder.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> + + +static int mapram_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); +static int mapram_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *); +static int mapram_erase (struct mtd_info *, struct erase_info *); +static void mapram_nop (struct mtd_info *); +static struct mtd_info *map_ram_probe(struct map_info *map); +static int mapram_point (struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, resource_size_t *phys); +static int mapram_unpoint(struct mtd_info *mtd, loff_t from, size_t len); + + +static struct mtd_chip_driver mapram_chipdrv = { + .probe = map_ram_probe, + .name = "map_ram", + .module = THIS_MODULE +}; + +static struct mtd_info *map_ram_probe(struct map_info *map) +{ + struct mtd_info *mtd; + + /* Check the first byte is RAM */ +#if 0 + map_write8(map, 0x55, 0); + if (map_read8(map, 0) != 0x55) + return NULL; + + map_write8(map, 0xAA, 0); + if (map_read8(map, 0) != 0xAA) + return NULL; + + /* Check the last byte is RAM */ + map_write8(map, 0x55, map->size-1); + if (map_read8(map, map->size-1) != 0x55) + return NULL; + + map_write8(map, 0xAA, map->size-1); + if (map_read8(map, map->size-1) != 0xAA) + return NULL; +#endif + /* OK. It seems to be RAM. */ + + mtd = kzalloc(sizeof(*mtd), GFP_KERNEL); + if (!mtd) + return NULL; + + map->fldrv = &mapram_chipdrv; + mtd->priv = map; + mtd->name = map->name; + mtd->type = MTD_RAM; + mtd->size = map->size; + mtd->_erase = mapram_erase; + mtd->_read = mapram_read; + mtd->_write = mapram_write; + mtd->_panic_write = mapram_write; + mtd->_point = mapram_point; + mtd->_sync = mapram_nop; + mtd->_unpoint = mapram_unpoint; + mtd->flags = MTD_CAP_RAM; + mtd->writesize = 1; + + mtd->erasesize = PAGE_SIZE; + while(mtd->size & (mtd->erasesize - 1)) + mtd->erasesize >>= 1; + + __module_get(THIS_MODULE); + return mtd; +} + +static int mapram_point(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, resource_size_t *phys) +{ + struct map_info *map = mtd->priv; + + if (!map->virt) + return -EINVAL; + *virt = map->virt + from; + if (phys) + *phys = map->phys + from; + *retlen = len; + return 0; +} + +static int mapram_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +{ + return 0; +} + +static int mapram_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) +{ + struct map_info *map = mtd->priv; + + map_copy_from(map, buf, from, len); + *retlen = len; + return 0; +} + +static int mapram_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) +{ + struct map_info *map = mtd->priv; + + map_copy_to(map, to, buf, len); + *retlen = len; + return 0; +} + +static int mapram_erase (struct mtd_info *mtd, struct erase_info *instr) +{ + /* Yeah, it's inefficient. Who cares? It's faster than a _real_ + flash erase. */ + struct map_info *map = mtd->priv; + map_word allff; + unsigned long i; + + allff = map_word_ff(map); + for (i=0; i<instr->len; i += map_bankwidth(map)) + map_write(map, allff, instr->addr + i); + return 0; +} + +static void mapram_nop(struct mtd_info *mtd) +{ + /* Nothing to see here */ +} + +static int __init map_ram_init(void) +{ + register_mtd_chip_driver(&mapram_chipdrv); + return 0; +} + +static void __exit map_ram_exit(void) +{ + unregister_mtd_chip_driver(&mapram_chipdrv); +} + +module_init(map_ram_init); +module_exit(map_ram_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>"); +MODULE_DESCRIPTION("MTD chip driver for RAM chips"); diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c new file mode 100644 index 000000000..20e3604b4 --- /dev/null +++ b/drivers/mtd/chips/map_rom.c @@ -0,0 +1,132 @@ +/* + * Common code to handle map devices which are simple ROM + * (C) 2000 Red Hat. GPL'd. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <asm/io.h> +#include <asm/byteorder.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> + +static int maprom_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); +static int maprom_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *); +static void maprom_nop (struct mtd_info *); +static struct mtd_info *map_rom_probe(struct map_info *map); +static int maprom_erase (struct mtd_info *mtd, struct erase_info *info); +static int maprom_point (struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, resource_size_t *phys); +static int maprom_unpoint(struct mtd_info *mtd, loff_t from, size_t len); + + +static struct mtd_chip_driver maprom_chipdrv = { + .probe = map_rom_probe, + .name = "map_rom", + .module = THIS_MODULE +}; + +static unsigned int default_erasesize(struct map_info *map) +{ + const __be32 *erase_size = NULL; + + erase_size = of_get_property(map->device_node, "erase-size", NULL); + + return !erase_size ? map->size : be32_to_cpu(*erase_size); +} + +static struct mtd_info *map_rom_probe(struct map_info *map) +{ + struct mtd_info *mtd; + + mtd = kzalloc(sizeof(*mtd), GFP_KERNEL); + if (!mtd) + return NULL; + + map->fldrv = &maprom_chipdrv; + mtd->priv = map; + mtd->name = map->name; + mtd->type = MTD_ROM; + mtd->size = map->size; + mtd->_point = maprom_point; + mtd->_unpoint = maprom_unpoint; + mtd->_read = maprom_read; + mtd->_write = maprom_write; + mtd->_sync = maprom_nop; + mtd->_erase = maprom_erase; + mtd->flags = MTD_CAP_ROM; + mtd->erasesize = default_erasesize(map); + mtd->writesize = 1; + mtd->writebufsize = 1; + + __module_get(THIS_MODULE); + return mtd; +} + + +static int maprom_point(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, void **virt, resource_size_t *phys) +{ + struct map_info *map = mtd->priv; + + if (!map->virt) + return -EINVAL; + *virt = map->virt + from; + if (phys) + *phys = map->phys + from; + *retlen = len; + return 0; +} + +static int maprom_unpoint(struct mtd_info *mtd, loff_t from, size_t len) +{ + return 0; +} + +static int maprom_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) +{ + struct map_info *map = mtd->priv; + + map_copy_from(map, buf, from, len); + *retlen = len; + return 0; +} + +static void maprom_nop(struct mtd_info *mtd) +{ + /* Nothing to see here */ +} + +static int maprom_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf) +{ + return -EROFS; +} + +static int maprom_erase (struct mtd_info *mtd, struct erase_info *info) +{ + /* We do our best 8) */ + return -EROFS; +} + +static int __init map_rom_init(void) +{ + register_mtd_chip_driver(&maprom_chipdrv); + return 0; +} + +static void __exit map_rom_exit(void) +{ + unregister_mtd_chip_driver(&maprom_chipdrv); +} + +module_init(map_rom_init); +module_exit(map_rom_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>"); +MODULE_DESCRIPTION("MTD chip driver for ROM chips"); |