diff options
Diffstat (limited to 'drivers/net/ethernet/freescale/dpaa2/dpni.h')
| -rw-r--r-- | drivers/net/ethernet/freescale/dpaa2/dpni.h | 1117 |
1 files changed, 1117 insertions, 0 deletions
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpni.h b/drivers/net/ethernet/freescale/dpaa2/dpni.h new file mode 100644 index 000000000..e7b9e195b --- /dev/null +++ b/drivers/net/ethernet/freescale/dpaa2/dpni.h @@ -0,0 +1,1117 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* Copyright 2013-2016 Freescale Semiconductor Inc. + * Copyright 2016 NXP + * Copyright 2020 NXP + */ +#ifndef __FSL_DPNI_H +#define __FSL_DPNI_H + +#include "dpkg.h" + +struct fsl_mc_io; + +/** + * Data Path Network Interface API + * Contains initialization APIs and runtime control APIs for DPNI + */ + +/** General DPNI macros */ + +/** + * Maximum number of traffic classes + */ +#define DPNI_MAX_TC 8 +/** + * Maximum number of buffer pools per DPNI + */ +#define DPNI_MAX_DPBP 8 + +/** + * All traffic classes considered; see dpni_set_queue() + */ +#define DPNI_ALL_TCS (u8)(-1) +/** + * All flows within traffic class considered; see dpni_set_queue() + */ +#define DPNI_ALL_TC_FLOWS (u16)(-1) +/** + * Generate new flow ID; see dpni_set_queue() + */ +#define DPNI_NEW_FLOW_ID (u16)(-1) + +/** + * Tx traffic is always released to a buffer pool on transmit, there are no + * resources allocated to have the frames confirmed back to the source after + * transmission. + */ +#define DPNI_OPT_TX_FRM_RELEASE 0x000001 +/** + * Disables support for MAC address filtering for addresses other than primary + * MAC address. This affects both unicast and multicast. Promiscuous mode can + * still be enabled/disabled for both unicast and multicast. If promiscuous mode + * is disabled, only traffic matching the primary MAC address will be accepted. + */ +#define DPNI_OPT_NO_MAC_FILTER 0x000002 +/** + * Allocate policers for this DPNI. They can be used to rate-limit traffic per + * traffic class (TC) basis. + */ +#define DPNI_OPT_HAS_POLICING 0x000004 +/** + * Congestion can be managed in several ways, allowing the buffer pool to + * deplete on ingress, taildrop on each queue or use congestion groups for sets + * of queues. If set, it configures a single congestion groups across all TCs. + * If reset, a congestion group is allocated for each TC. Only relevant if the + * DPNI has multiple traffic classes. + */ +#define DPNI_OPT_SHARED_CONGESTION 0x000008 +/** + * Enables TCAM for Flow Steering and QoS look-ups. If not specified, all + * look-ups are exact match. Note that TCAM is not available on LS1088 and its + * variants. Setting this bit on these SoCs will trigger an error. + */ +#define DPNI_OPT_HAS_KEY_MASKING 0x000010 +/** + * Disables the flow steering table. + */ +#define DPNI_OPT_NO_FS 0x000020 +/** + * Flow steering table is shared between all traffic classes + */ +#define DPNI_OPT_SHARED_FS 0x001000 + +int dpni_open(struct fsl_mc_io *mc_io, + u32 cmd_flags, + int dpni_id, + u16 *token); + +int dpni_close(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token); + +/** + * struct dpni_pools_cfg - Structure representing buffer pools configuration + * @num_dpbp: Number of DPBPs + * @pools: Array of buffer pools parameters; The number of valid entries + * must match 'num_dpbp' value + * @pools.dpbp_id: DPBP object ID + * @pools.buffer_size: Buffer size + * @pools.backup_pool: Backup pool + */ +struct dpni_pools_cfg { + u8 num_dpbp; + struct { + int dpbp_id; + u16 buffer_size; + int backup_pool; + } pools[DPNI_MAX_DPBP]; +}; + +int dpni_set_pools(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + const struct dpni_pools_cfg *cfg); + +int dpni_enable(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token); + +int dpni_disable(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token); + +int dpni_is_enabled(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + int *en); + +int dpni_reset(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token); + +/** + * DPNI IRQ Index and Events + */ + +/** + * IRQ index + */ +#define DPNI_IRQ_INDEX 0 +/** + * IRQ events: + * indicates a change in link state + * indicates a change in endpoint + */ +#define DPNI_IRQ_EVENT_LINK_CHANGED 0x00000001 +#define DPNI_IRQ_EVENT_ENDPOINT_CHANGED 0x00000002 + +int dpni_set_irq_enable(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + u8 irq_index, + u8 en); + +int dpni_get_irq_enable(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + u8 irq_index, + u8 *en); + +int dpni_set_irq_mask(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + u8 irq_index, + u32 mask); + +int dpni_get_irq_mask(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + u8 irq_index, + u32 *mask); + +int dpni_get_irq_status(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + u8 irq_index, + u32 *status); + +int dpni_clear_irq_status(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + u8 irq_index, + u32 status); + +/** + * struct dpni_attr - Structure representing DPNI attributes + * @options: Any combination of the following options: + * DPNI_OPT_TX_FRM_RELEASE + * DPNI_OPT_NO_MAC_FILTER + * DPNI_OPT_HAS_POLICING + * DPNI_OPT_SHARED_CONGESTION + * DPNI_OPT_HAS_KEY_MASKING + * DPNI_OPT_NO_FS + * @num_queues: Number of Tx and Rx queues used for traffic distribution. + * @num_tcs: Number of traffic classes (TCs), reserved for the DPNI. + * @mac_filter_entries: Number of entries in the MAC address filtering table. + * @vlan_filter_entries: Number of entries in the VLAN address filtering table. + * @qos_entries: Number of entries in the QoS classification table. + * @fs_entries: Number of entries in the flow steering table. + * @qos_key_size: Size, in bytes, of the QoS look-up key. Defining a key larger + * than this when adding QoS entries will result in an error. + * @fs_key_size: Size, in bytes, of the flow steering look-up key. Defining a + * key larger than this when composing the hash + FS key will + * result in an error. + * @wriop_version: Version of WRIOP HW block. The 3 version values are stored + * on 6, 5, 5 bits respectively. + */ +struct dpni_attr { + u32 options; + u8 num_queues; + u8 num_tcs; + u8 mac_filter_entries; + u8 vlan_filter_entries; + u8 qos_entries; + u16 fs_entries; + u8 qos_key_size; + u8 fs_key_size; + u16 wriop_version; +}; + +int dpni_get_attributes(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + struct dpni_attr *attr); + +/** + * DPNI errors + */ + +/** + * Extract out of frame header error + */ +#define DPNI_ERROR_EOFHE 0x00020000 +/** + * Frame length error + */ +#define DPNI_ERROR_FLE 0x00002000 +/** + * Frame physical error + */ +#define DPNI_ERROR_FPE 0x00001000 +/** + * Parsing header error + */ +#define DPNI_ERROR_PHE 0x00000020 +/** + * Parser L3 checksum error + */ +#define DPNI_ERROR_L3CE 0x00000004 +/** + * Parser L3 checksum error + */ +#define DPNI_ERROR_L4CE 0x00000001 + +/** + * enum dpni_error_action - Defines DPNI behavior for errors + * @DPNI_ERROR_ACTION_DISCARD: Discard the frame + * @DPNI_ERROR_ACTION_CONTINUE: Continue with the normal flow + * @DPNI_ERROR_ACTION_SEND_TO_ERROR_QUEUE: Send the frame to the error queue + */ +enum dpni_error_action { + DPNI_ERROR_ACTION_DISCARD = 0, + DPNI_ERROR_ACTION_CONTINUE = 1, + DPNI_ERROR_ACTION_SEND_TO_ERROR_QUEUE = 2 +}; + +/** + * struct dpni_error_cfg - Structure representing DPNI errors treatment + * @errors: Errors mask; use 'DPNI_ERROR__<X> + * @error_action: The desired action for the errors mask + * @set_frame_annotation: Set to '1' to mark the errors in frame annotation + * status (FAS); relevant only for the non-discard action + */ +struct dpni_error_cfg { + u32 errors; + enum dpni_error_action error_action; + int set_frame_annotation; +}; + +int dpni_set_errors_behavior(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + struct dpni_error_cfg *cfg); + +/** + * DPNI buffer layout modification options + */ + +/** + * Select to modify the time-stamp setting + */ +#define DPNI_BUF_LAYOUT_OPT_TIMESTAMP 0x00000001 +/** + * Select to modify the parser-result setting; not applicable for Tx + */ +#define DPNI_BUF_LAYOUT_OPT_PARSER_RESULT 0x00000002 +/** + * Select to modify the frame-status setting + */ +#define DPNI_BUF_LAYOUT_OPT_FRAME_STATUS 0x00000004 +/** + * Select to modify the private-data-size setting + */ +#define DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE 0x00000008 +/** + * Select to modify the data-alignment setting + */ +#define DPNI_BUF_LAYOUT_OPT_DATA_ALIGN 0x00000010 +/** + * Select to modify the data-head-room setting + */ +#define DPNI_BUF_LAYOUT_OPT_DATA_HEAD_ROOM 0x00000020 +/** + * Select to modify the data-tail-room setting + */ +#define DPNI_BUF_LAYOUT_OPT_DATA_TAIL_ROOM 0x00000040 + +/** + * struct dpni_buffer_layout - Structure representing DPNI buffer layout + * @options: Flags representing the suggested modifications to the buffer + * layout; Use any combination of 'DPNI_BUF_LAYOUT_OPT_<X>' flags + * @pass_timestamp: Pass timestamp value + * @pass_parser_result: Pass parser results + * @pass_frame_status: Pass frame status + * @private_data_size: Size kept for private data (in bytes) + * @data_align: Data alignment + * @data_head_room: Data head room + * @data_tail_room: Data tail room + */ +struct dpni_buffer_layout { + u32 options; + int pass_timestamp; + int pass_parser_result; + int pass_frame_status; + u16 private_data_size; + u16 data_align; + u16 data_head_room; + u16 data_tail_room; +}; + +/** + * enum dpni_queue_type - Identifies a type of queue targeted by the command + * @DPNI_QUEUE_RX: Rx queue + * @DPNI_QUEUE_TX: Tx queue + * @DPNI_QUEUE_TX_CONFIRM: Tx confirmation queue + * @DPNI_QUEUE_RX_ERR: Rx error queue + */enum dpni_queue_type { + DPNI_QUEUE_RX, + DPNI_QUEUE_TX, + DPNI_QUEUE_TX_CONFIRM, + DPNI_QUEUE_RX_ERR, +}; + +int dpni_get_buffer_layout(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + enum dpni_queue_type qtype, + struct dpni_buffer_layout *layout); + +int dpni_set_buffer_layout(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + enum dpni_queue_type qtype, + const struct dpni_buffer_layout *layout); + +/** + * enum dpni_offload - Identifies a type of offload targeted by the command + * @DPNI_OFF_RX_L3_CSUM: Rx L3 checksum validation + * @DPNI_OFF_RX_L4_CSUM: Rx L4 checksum validation + * @DPNI_OFF_TX_L3_CSUM: Tx L3 checksum generation + * @DPNI_OFF_TX_L4_CSUM: Tx L4 checksum generation + */ +enum dpni_offload { + DPNI_OFF_RX_L3_CSUM, + DPNI_OFF_RX_L4_CSUM, + DPNI_OFF_TX_L3_CSUM, + DPNI_OFF_TX_L4_CSUM, +}; + +int dpni_set_offload(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + enum dpni_offload type, + u32 config); + +int dpni_get_offload(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + enum dpni_offload type, + u32 *config); + +int dpni_get_qdid(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + enum dpni_queue_type qtype, + u16 *qdid); + +int dpni_get_tx_data_offset(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + u16 *data_offset); + +#define DPNI_STATISTICS_CNT 7 + +/** + * union dpni_statistics - Union describing the DPNI statistics + * @page_0: Page_0 statistics structure + * @page_0.ingress_all_frames: Ingress frame count + * @page_0.ingress_all_bytes: Ingress byte count + * @page_0.ingress_multicast_frames: Ingress multicast frame count + * @page_0.ingress_multicast_bytes: Ingress multicast byte count + * @page_0.ingress_broadcast_frames: Ingress broadcast frame count + * @page_0.ingress_broadcast_bytes: Ingress broadcast byte count + * @page_1: Page_1 statistics structure + * @page_1.egress_all_frames: Egress frame count + * @page_1.egress_all_bytes: Egress byte count + * @page_1.egress_multicast_frames: Egress multicast frame count + * @page_1.egress_multicast_bytes: Egress multicast byte count + * @page_1.egress_broadcast_frames: Egress broadcast frame count + * @page_1.egress_broadcast_bytes: Egress broadcast byte count + * @page_2: Page_2 statistics structure + * @page_2.ingress_filtered_frames: Ingress filtered frame count + * @page_2.ingress_discarded_frames: Ingress discarded frame count + * @page_2.ingress_nobuffer_discards: Ingress discarded frame count due to + * lack of buffers + * @page_2.egress_discarded_frames: Egress discarded frame count + * @page_2.egress_confirmed_frames: Egress confirmed frame count + * @page3: Page_3 statistics structure + * @page_3.egress_dequeue_bytes: Cumulative count of the number of bytes + * dequeued from egress FQs + * @page_3.egress_dequeue_frames: Cumulative count of the number of frames + * dequeued from egress FQs + * @page_3.egress_reject_bytes: Cumulative count of the number of bytes in + * egress frames whose enqueue was rejected + * @page_3.egress_reject_frames: Cumulative count of the number of egress + * frames whose enqueue was rejected + * @page_4: Page_4 statistics structure: congestion points + * @page_4.cgr_reject_frames: number of rejected frames due to congestion point + * @page_4.cgr_reject_bytes: number of rejected bytes due to congestion point + * @page_5: Page_5 statistics structure: policer + * @page_5.policer_cnt_red: NUmber of red colored frames + * @page_5.policer_cnt_yellow: number of yellow colored frames + * @page_5.policer_cnt_green: number of green colored frames + * @page_5.policer_cnt_re_red: number of recolored red frames + * @page_5.policer_cnt_re_yellow: number of recolored yellow frames + * @page_6: Page_6 statistics structure + * @page_6.tx_pending_frames: total number of frames pending in egress FQs + * @raw: raw statistics structure, used to index counters + */ +union dpni_statistics { + struct { + u64 ingress_all_frames; + u64 ingress_all_bytes; + u64 ingress_multicast_frames; + u64 ingress_multicast_bytes; + u64 ingress_broadcast_frames; + u64 ingress_broadcast_bytes; + } page_0; + struct { + u64 egress_all_frames; + u64 egress_all_bytes; + u64 egress_multicast_frames; + u64 egress_multicast_bytes; + u64 egress_broadcast_frames; + u64 egress_broadcast_bytes; + } page_1; + struct { + u64 ingress_filtered_frames; + u64 ingress_discarded_frames; + u64 ingress_nobuffer_discards; + u64 egress_discarded_frames; + u64 egress_confirmed_frames; + } page_2; + struct { + u64 egress_dequeue_bytes; + u64 egress_dequeue_frames; + u64 egress_reject_bytes; + u64 egress_reject_frames; + } page_3; + struct { + u64 cgr_reject_frames; + u64 cgr_reject_bytes; + } page_4; + struct { + u64 policer_cnt_red; + u64 policer_cnt_yellow; + u64 policer_cnt_green; + u64 policer_cnt_re_red; + u64 policer_cnt_re_yellow; + } page_5; + struct { + u64 tx_pending_frames; + } page_6; + struct { + u64 counter[DPNI_STATISTICS_CNT]; + } raw; +}; + +int dpni_get_statistics(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + u8 page, + union dpni_statistics *stat); + +/** + * Enable auto-negotiation + */ +#define DPNI_LINK_OPT_AUTONEG 0x0000000000000001ULL +/** + * Enable half-duplex mode + */ +#define DPNI_LINK_OPT_HALF_DUPLEX 0x0000000000000002ULL +/** + * Enable pause frames + */ +#define DPNI_LINK_OPT_PAUSE 0x0000000000000004ULL +/** + * Enable a-symmetric pause frames + */ +#define DPNI_LINK_OPT_ASYM_PAUSE 0x0000000000000008ULL + +/** + * Enable priority flow control pause frames + */ +#define DPNI_LINK_OPT_PFC_PAUSE 0x0000000000000010ULL + +/** + * struct - Structure representing DPNI link configuration + * @rate: Rate + * @options: Mask of available options; use 'DPNI_LINK_OPT_<X>' values + */ +struct dpni_link_cfg { + u32 rate; + u64 options; +}; + +int dpni_set_link_cfg(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + const struct dpni_link_cfg *cfg); + +int dpni_get_link_cfg(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + struct dpni_link_cfg *cfg); + +/** + * struct dpni_link_state - Structure representing DPNI link state + * @rate: Rate + * @options: Mask of available options; use 'DPNI_LINK_OPT_<X>' values + * @up: Link state; '0' for down, '1' for up + */ +struct dpni_link_state { + u32 rate; + u64 options; + int up; +}; + +int dpni_get_link_state(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + struct dpni_link_state *state); + +int dpni_set_max_frame_length(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + u16 max_frame_length); + +int dpni_get_max_frame_length(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + u16 *max_frame_length); + +int dpni_set_multicast_promisc(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + int en); + +int dpni_get_multicast_promisc(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + int *en); + +int dpni_set_unicast_promisc(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + int en); + +int dpni_get_unicast_promisc(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + int *en); + +int dpni_set_primary_mac_addr(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + const u8 mac_addr[6]); + +int dpni_get_primary_mac_addr(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + u8 mac_addr[6]); + +int dpni_get_port_mac_addr(struct fsl_mc_io *mc_io, + u32 cm_flags, + u16 token, + u8 mac_addr[6]); + +int dpni_add_mac_addr(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + const u8 mac_addr[6]); + +int dpni_remove_mac_addr(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + const u8 mac_addr[6]); + +int dpni_clear_mac_filters(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + int unicast, + int multicast); + +/** + * enum dpni_dist_mode - DPNI distribution mode + * @DPNI_DIST_MODE_NONE: No distribution + * @DPNI_DIST_MODE_HASH: Use hash distribution; only relevant if + * the 'DPNI_OPT_DIST_HASH' option was set at DPNI creation + * @DPNI_DIST_MODE_FS: Use explicit flow steering; only relevant if + * the 'DPNI_OPT_DIST_FS' option was set at DPNI creation + */ +enum dpni_dist_mode { + DPNI_DIST_MODE_NONE = 0, + DPNI_DIST_MODE_HASH = 1, + DPNI_DIST_MODE_FS = 2 +}; + +/** + * enum dpni_fs_miss_action - DPNI Flow Steering miss action + * @DPNI_FS_MISS_DROP: In case of no-match, drop the frame + * @DPNI_FS_MISS_EXPLICIT_FLOWID: In case of no-match, use explicit flow-id + * @DPNI_FS_MISS_HASH: In case of no-match, distribute using hash + */ +enum dpni_fs_miss_action { + DPNI_FS_MISS_DROP = 0, + DPNI_FS_MISS_EXPLICIT_FLOWID = 1, + DPNI_FS_MISS_HASH = 2 +}; + +/** + * struct dpni_fs_tbl_cfg - Flow Steering table configuration + * @miss_action: Miss action selection + * @default_flow_id: Used when 'miss_action = DPNI_FS_MISS_EXPLICIT_FLOWID' + */ +struct dpni_fs_tbl_cfg { + enum dpni_fs_miss_action miss_action; + u16 default_flow_id; +}; + +int dpni_prepare_key_cfg(const struct dpkg_profile_cfg *cfg, + u8 *key_cfg_buf); + +/** + * struct dpni_rx_tc_dist_cfg - Rx traffic class distribution configuration + * @dist_size: Set the distribution size; + * supported values: 1,2,3,4,6,7,8,12,14,16,24,28,32,48,56,64,96, + * 112,128,192,224,256,384,448,512,768,896,1024 + * @dist_mode: Distribution mode + * @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with + * the extractions to be used for the distribution key by calling + * dpni_prepare_key_cfg() relevant only when + * 'dist_mode != DPNI_DIST_MODE_NONE', otherwise it can be '0' + * @fs_cfg: Flow Steering table configuration; only relevant if + * 'dist_mode = DPNI_DIST_MODE_FS' + */ +struct dpni_rx_tc_dist_cfg { + u16 dist_size; + enum dpni_dist_mode dist_mode; + u64 key_cfg_iova; + struct dpni_fs_tbl_cfg fs_cfg; +}; + +int dpni_set_rx_tc_dist(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + u8 tc_id, + const struct dpni_rx_tc_dist_cfg *cfg); + +/** + * When used for fs_miss_flow_id in function dpni_set_rx_dist, + * will signal to dpni to drop all unclassified frames + */ +#define DPNI_FS_MISS_DROP ((uint16_t)-1) + +/** + * struct dpni_rx_dist_cfg - Rx distribution configuration + * @dist_size: distribution size + * @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with + * the extractions to be used for the distribution key by calling + * dpni_prepare_key_cfg(); relevant only when enable!=0 otherwise + * it can be '0' + * @enable: enable/disable the distribution. + * @tc: TC id for which distribution is set + * @fs_miss_flow_id: when packet misses all rules from flow steering table and + * hash is disabled it will be put into this queue id; use + * DPNI_FS_MISS_DROP to drop frames. The value of this field is + * used only when flow steering distribution is enabled and hash + * distribution is disabled + */ +struct dpni_rx_dist_cfg { + u16 dist_size; + u64 key_cfg_iova; + u8 enable; + u8 tc; + u16 fs_miss_flow_id; +}; + +int dpni_set_rx_fs_dist(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + const struct dpni_rx_dist_cfg *cfg); + +int dpni_set_rx_hash_dist(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + const struct dpni_rx_dist_cfg *cfg); + +/** + * struct dpni_qos_tbl_cfg - Structure representing QOS table configuration + * @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with + * key extractions to be used as the QoS criteria by calling + * dpkg_prepare_key_cfg() + * @discard_on_miss: Set to '1' to discard frames in case of no match (miss); + * '0' to use the 'default_tc' in such cases + * @default_tc: Used in case of no-match and 'discard_on_miss'= 0 + */ +struct dpni_qos_tbl_cfg { + u64 key_cfg_iova; + int discard_on_miss; + u8 default_tc; +}; + +int dpni_set_qos_table(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + const struct dpni_qos_tbl_cfg *cfg); + +/** + * enum dpni_dest - DPNI destination types + * @DPNI_DEST_NONE: Unassigned destination; The queue is set in parked mode and + * does not generate FQDAN notifications; user is expected to + * dequeue from the queue based on polling or other user-defined + * method + * @DPNI_DEST_DPIO: The queue is set in schedule mode and generates FQDAN + * notifications to the specified DPIO; user is expected to dequeue + * from the queue only after notification is received + * @DPNI_DEST_DPCON: The queue is set in schedule mode and does not generate + * FQDAN notifications, but is connected to the specified DPCON + * object; user is expected to dequeue from the DPCON channel + */ +enum dpni_dest { + DPNI_DEST_NONE = 0, + DPNI_DEST_DPIO = 1, + DPNI_DEST_DPCON = 2 +}; + +/** + * struct dpni_queue - Queue structure + * @destination - Destination structure + * @destination.id: ID of the destination, only relevant if DEST_TYPE is > 0. + * Identifies either a DPIO or a DPCON object. + * Not relevant for Tx queues. + * @destination.type: May be one of the following: + * 0 - No destination, queue can be manually + * queried, but will not push traffic or + * notifications to a DPIO; + * 1 - The destination is a DPIO. When traffic + * becomes available in the queue a FQDAN + * (FQ data available notification) will be + * generated to selected DPIO; + * 2 - The destination is a DPCON. The queue is + * associated with a DPCON object for the + * purpose of scheduling between multiple + * queues. The DPCON may be independently + * configured to generate notifications. + * Not relevant for Tx queues. + * @destination.hold_active: Hold active, maintains a queue scheduled for longer + * in a DPIO during dequeue to reduce spread of traffic. + * Only relevant if queues are + * not affined to a single DPIO. + * @user_context: User data, presented to the user along with any frames + * from this queue. Not relevant for Tx queues. + * @flc: FD FLow Context structure + * @flc.value: Default FLC value for traffic dequeued from + * this queue. Please check description of FD + * structure for more information. + * Note that FLC values set using dpni_add_fs_entry, + * if any, take precedence over values per queue. + * @flc.stash_control: Boolean, indicates whether the 6 lowest + * - significant bits are used for stash control. + * significant bits are used for stash control. If set, the 6 + * least significant bits in value are interpreted as follows: + * - bits 0-1: indicates the number of 64 byte units of context + * that are stashed. FLC value is interpreted as a memory address + * in this case, excluding the 6 LS bits. + * - bits 2-3: indicates the number of 64 byte units of frame + * annotation to be stashed. Annotation is placed at FD[ADDR]. + * - bits 4-5: indicates the number of 64 byte units of frame + * data to be stashed. Frame data is placed at FD[ADDR] + + * FD[OFFSET]. + * For more details check the Frame Descriptor section in the + * hardware documentation. + */ +struct dpni_queue { + struct { + u16 id; + enum dpni_dest type; + char hold_active; + u8 priority; + } destination; + u64 user_context; + struct { + u64 value; + char stash_control; + } flc; +}; + +/** + * struct dpni_queue_id - Queue identification, used for enqueue commands + * or queue control + * @fqid: FQID used for enqueueing to and/or configuration of this specific FQ + * @qdbin: Queueing bin, used to enqueue using QDID, DQBIN, QPRI. Only relevant + * for Tx queues. + */ +struct dpni_queue_id { + u32 fqid; + u16 qdbin; +}; + +/** + * Set User Context + */ +#define DPNI_QUEUE_OPT_USER_CTX 0x00000001 +#define DPNI_QUEUE_OPT_DEST 0x00000002 +#define DPNI_QUEUE_OPT_FLC 0x00000004 +#define DPNI_QUEUE_OPT_HOLD_ACTIVE 0x00000008 + +int dpni_set_queue(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + enum dpni_queue_type qtype, + u8 tc, + u8 index, + u8 options, + const struct dpni_queue *queue); + +int dpni_get_queue(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + enum dpni_queue_type qtype, + u8 tc, + u8 index, + struct dpni_queue *queue, + struct dpni_queue_id *qid); + +/** + * enum dpni_congestion_unit - DPNI congestion units + * @DPNI_CONGESTION_UNIT_BYTES: bytes units + * @DPNI_CONGESTION_UNIT_FRAMES: frames units + */ +enum dpni_congestion_unit { + DPNI_CONGESTION_UNIT_BYTES = 0, + DPNI_CONGESTION_UNIT_FRAMES +}; + +/** + * enum dpni_congestion_point - Structure representing congestion point + * @DPNI_CP_QUEUE: Set taildrop per queue, identified by QUEUE_TYPE, TC and + * QUEUE_INDEX + * @DPNI_CP_GROUP: Set taildrop per queue group. Depending on options used to + * define the DPNI this can be either per TC (default) or per + * interface (DPNI_OPT_SHARED_CONGESTION set at DPNI create). + * QUEUE_INDEX is ignored if this type is used. + */ +enum dpni_congestion_point { + DPNI_CP_QUEUE, + DPNI_CP_GROUP, +}; + +/** + * struct dpni_dest_cfg - Structure representing DPNI destination parameters + * @dest_type: Destination type + * @dest_id: Either DPIO ID or DPCON ID, depending on the destination type + * @priority: Priority selection within the DPIO or DPCON channel; valid + * values are 0-1 or 0-7, depending on the number of priorities + * in that channel; not relevant for 'DPNI_DEST_NONE' option + */ +struct dpni_dest_cfg { + enum dpni_dest dest_type; + int dest_id; + u8 priority; +}; + +/* DPNI congestion options */ + +/** + * This congestion will trigger flow control or priority flow control. + * This will have effect only if flow control is enabled with + * dpni_set_link_cfg(). + */ +#define DPNI_CONG_OPT_FLOW_CONTROL 0x00000040 + +/** + * struct dpni_congestion_notification_cfg - congestion notification + * configuration + * @units: Units type + * @threshold_entry: Above this threshold we enter a congestion state. + * set it to '0' to disable it + * @threshold_exit: Below this threshold we exit the congestion state. + * @message_ctx: The context that will be part of the CSCN message + * @message_iova: I/O virtual address (must be in DMA-able memory), + * must be 16B aligned; valid only if 'DPNI_CONG_OPT_WRITE_MEM_<X>' + * is contained in 'options' + * @dest_cfg: CSCN can be send to either DPIO or DPCON WQ channel + * @notification_mode: Mask of available options; use 'DPNI_CONG_OPT_<X>' values + */ + +struct dpni_congestion_notification_cfg { + enum dpni_congestion_unit units; + u32 threshold_entry; + u32 threshold_exit; + u64 message_ctx; + u64 message_iova; + struct dpni_dest_cfg dest_cfg; + u16 notification_mode; +}; + +int dpni_set_congestion_notification( + struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + enum dpni_queue_type qtype, + u8 tc_id, + const struct dpni_congestion_notification_cfg *cfg); + +/** + * struct dpni_taildrop - Structure representing the taildrop + * @enable: Indicates whether the taildrop is active or not. + * @units: Indicates the unit of THRESHOLD. Queue taildrop only supports + * byte units, this field is ignored and assumed = 0 if + * CONGESTION_POINT is 0. + * @threshold: Threshold value, in units identified by UNITS field. Value 0 + * cannot be used as a valid taildrop threshold, THRESHOLD must + * be > 0 if the taildrop is enabled. + */ +struct dpni_taildrop { + char enable; + enum dpni_congestion_unit units; + u32 threshold; +}; + +int dpni_set_taildrop(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + enum dpni_congestion_point cg_point, + enum dpni_queue_type q_type, + u8 tc, + u8 q_index, + struct dpni_taildrop *taildrop); + +int dpni_get_taildrop(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + enum dpni_congestion_point cg_point, + enum dpni_queue_type q_type, + u8 tc, + u8 q_index, + struct dpni_taildrop *taildrop); + +/** + * struct dpni_rule_cfg - Rule configuration for table lookup + * @key_iova: I/O virtual address of the key (must be in DMA-able memory) + * @mask_iova: I/O virtual address of the mask (must be in DMA-able memory) + * @key_size: key and mask size (in bytes) + */ +struct dpni_rule_cfg { + u64 key_iova; + u64 mask_iova; + u8 key_size; +}; + +/** + * Discard matching traffic. If set, this takes precedence over any other + * configuration and matching traffic is always discarded. + */ + #define DPNI_FS_OPT_DISCARD 0x1 + +/** + * Set FLC value. If set, flc member of struct dpni_fs_action_cfg is used to + * override the FLC value set per queue. + * For more details check the Frame Descriptor section in the hardware + * documentation. + */ +#define DPNI_FS_OPT_SET_FLC 0x2 + +/** + * Indicates whether the 6 lowest significant bits of FLC are used for stash + * control. If set, the 6 least significant bits in value are interpreted as + * follows: + * - bits 0-1: indicates the number of 64 byte units of context that are + * stashed. FLC value is interpreted as a memory address in this case, + * excluding the 6 LS bits. + * - bits 2-3: indicates the number of 64 byte units of frame annotation + * to be stashed. Annotation is placed at FD[ADDR]. + * - bits 4-5: indicates the number of 64 byte units of frame data to be + * stashed. Frame data is placed at FD[ADDR] + FD[OFFSET]. + * This flag is ignored if DPNI_FS_OPT_SET_FLC is not specified. + */ +#define DPNI_FS_OPT_SET_STASH_CONTROL 0x4 + +/** + * struct dpni_fs_action_cfg - Action configuration for table look-up + * @flc: FLC value for traffic matching this rule. Please check the + * Frame Descriptor section in the hardware documentation for + * more information. + * @flow_id: Identifies the Rx queue used for matching traffic. Supported + * values are in range 0 to num_queue-1. + * @options: Any combination of DPNI_FS_OPT_ values. + */ +struct dpni_fs_action_cfg { + u64 flc; + u16 flow_id; + u16 options; +}; + +int dpni_add_fs_entry(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + u8 tc_id, + u16 index, + const struct dpni_rule_cfg *cfg, + const struct dpni_fs_action_cfg *action); + +int dpni_remove_fs_entry(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + u8 tc_id, + const struct dpni_rule_cfg *cfg); + +int dpni_add_qos_entry(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + const struct dpni_rule_cfg *cfg, + u8 tc_id, + u16 index); + +int dpni_remove_qos_entry(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + const struct dpni_rule_cfg *cfg); + +int dpni_clear_qos_table(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token); + +int dpni_get_api_version(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 *major_ver, + u16 *minor_ver); +/** + * struct dpni_tx_shaping - Structure representing DPNI tx shaping configuration + * @rate_limit: Rate in Mbps + * @max_burst_size: Burst size in bytes (up to 64KB) + */ +struct dpni_tx_shaping_cfg { + u32 rate_limit; + u16 max_burst_size; +}; + +int dpni_set_tx_shaping(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + const struct dpni_tx_shaping_cfg *tx_cr_shaper, + const struct dpni_tx_shaping_cfg *tx_er_shaper, + int coupled); + +/** + * struct dpni_single_step_cfg - configure single step PTP (IEEE 1588) + * @en: enable single step PTP. When enabled the PTPv1 functionality + * will not work. If the field is zero, offset and ch_update + * parameters will be ignored + * @offset: start offset from the beginning of the frame where + * timestamp field is found. The offset must respect all MAC + * headers, VLAN tags and other protocol headers + * @ch_update: when set UDP checksum will be updated inside packet + * @peer_delay: For peer-to-peer transparent clocks add this value to the + * correction field in addition to the transient time update. + * The value expresses nanoseconds. + */ +struct dpni_single_step_cfg { + u8 en; + u8 ch_update; + u16 offset; + u32 peer_delay; +}; + +int dpni_set_single_step_cfg(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + struct dpni_single_step_cfg *ptp_cfg); + +int dpni_get_single_step_cfg(struct fsl_mc_io *mc_io, + u32 cmd_flags, + u16 token, + struct dpni_single_step_cfg *ptp_cfg); + +#endif /* __FSL_DPNI_H */ |