diff options
Diffstat (limited to 'drivers/pci/hotplug/ibmphp_res.c')
| -rw-r--r-- | drivers/pci/hotplug/ibmphp_res.c | 2119 |
1 files changed, 2119 insertions, 0 deletions
diff --git a/drivers/pci/hotplug/ibmphp_res.c b/drivers/pci/hotplug/ibmphp_res.c new file mode 100644 index 000000000..ae9acc77d --- /dev/null +++ b/drivers/pci/hotplug/ibmphp_res.c @@ -0,0 +1,2119 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * IBM Hot Plug Controller Driver + * + * Written By: Irene Zubarev, IBM Corporation + * + * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2001,2002 IBM Corp. + * + * All rights reserved. + * + * Send feedback to <gregkh@us.ibm.com> + * + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/list.h> +#include <linux/init.h> +#include "ibmphp.h" + +static int flags = 0; /* for testing */ + +static void update_resources(struct bus_node *bus_cur, int type, int rangeno); +static int once_over(void); +static int remove_ranges(struct bus_node *, struct bus_node *); +static int update_bridge_ranges(struct bus_node **); +static int add_bus_range(int type, struct range_node *, struct bus_node *); +static void fix_resources(struct bus_node *); +static struct bus_node *find_bus_wprev(u8, struct bus_node **, u8); + +static LIST_HEAD(gbuses); + +static struct bus_node * __init alloc_error_bus(struct ebda_pci_rsrc *curr, u8 busno, int flag) +{ + struct bus_node *newbus; + + if (!(curr) && !(flag)) { + err("NULL pointer passed\n"); + return NULL; + } + + newbus = kzalloc(sizeof(struct bus_node), GFP_KERNEL); + if (!newbus) + return NULL; + + if (flag) + newbus->busno = busno; + else + newbus->busno = curr->bus_num; + list_add_tail(&newbus->bus_list, &gbuses); + return newbus; +} + +static struct resource_node * __init alloc_resources(struct ebda_pci_rsrc *curr) +{ + struct resource_node *rs; + + if (!curr) { + err("NULL passed to allocate\n"); + return NULL; + } + + rs = kzalloc(sizeof(struct resource_node), GFP_KERNEL); + if (!rs) + return NULL; + + rs->busno = curr->bus_num; + rs->devfunc = curr->dev_fun; + rs->start = curr->start_addr; + rs->end = curr->end_addr; + rs->len = curr->end_addr - curr->start_addr + 1; + return rs; +} + +static int __init alloc_bus_range(struct bus_node **new_bus, struct range_node **new_range, struct ebda_pci_rsrc *curr, int flag, u8 first_bus) +{ + struct bus_node *newbus; + struct range_node *newrange; + u8 num_ranges = 0; + + if (first_bus) { + newbus = kzalloc(sizeof(struct bus_node), GFP_KERNEL); + if (!newbus) + return -ENOMEM; + + newbus->busno = curr->bus_num; + } else { + newbus = *new_bus; + switch (flag) { + case MEM: + num_ranges = newbus->noMemRanges; + break; + case PFMEM: + num_ranges = newbus->noPFMemRanges; + break; + case IO: + num_ranges = newbus->noIORanges; + break; + } + } + + newrange = kzalloc(sizeof(struct range_node), GFP_KERNEL); + if (!newrange) { + if (first_bus) + kfree(newbus); + return -ENOMEM; + } + newrange->start = curr->start_addr; + newrange->end = curr->end_addr; + + if (first_bus || (!num_ranges)) + newrange->rangeno = 1; + else { + /* need to insert our range */ + add_bus_range(flag, newrange, newbus); + debug("%d resource Primary Bus inserted on bus %x [%x - %x]\n", flag, newbus->busno, newrange->start, newrange->end); + } + + switch (flag) { + case MEM: + newbus->rangeMem = newrange; + if (first_bus) + newbus->noMemRanges = 1; + else { + debug("First Memory Primary on bus %x, [%x - %x]\n", newbus->busno, newrange->start, newrange->end); + ++newbus->noMemRanges; + fix_resources(newbus); + } + break; + case IO: + newbus->rangeIO = newrange; + if (first_bus) + newbus->noIORanges = 1; + else { + debug("First IO Primary on bus %x, [%x - %x]\n", newbus->busno, newrange->start, newrange->end); + ++newbus->noIORanges; + fix_resources(newbus); + } + break; + case PFMEM: + newbus->rangePFMem = newrange; + if (first_bus) + newbus->noPFMemRanges = 1; + else { + debug("1st PFMemory Primary on Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end); + ++newbus->noPFMemRanges; + fix_resources(newbus); + } + + break; + } + + *new_bus = newbus; + *new_range = newrange; + return 0; +} + + +/* Notes: + * 1. The ranges are ordered. The buses are not ordered. (First come) + * + * 2. If cannot allocate out of PFMem range, allocate from Mem ranges. PFmemFromMem + * are not sorted. (no need since use mem node). To not change the entire code, we + * also add mem node whenever this case happens so as not to change + * ibmphp_check_mem_resource etc(and since it really is taking Mem resource) + */ + +/***************************************************************************** + * This is the Resource Management initialization function. It will go through + * the Resource list taken from EBDA and fill in this module's data structures + * + * THIS IS NOT TAKING INTO CONSIDERATION IO RESTRICTIONS OF PRIMARY BUSES, + * SINCE WE'RE GOING TO ASSUME FOR NOW WE DON'T HAVE THOSE ON OUR BUSES FOR NOW + * + * Input: ptr to the head of the resource list from EBDA + * Output: 0, -1 or error codes + ***************************************************************************/ +int __init ibmphp_rsrc_init(void) +{ + struct ebda_pci_rsrc *curr; + struct range_node *newrange = NULL; + struct bus_node *newbus = NULL; + struct bus_node *bus_cur; + struct bus_node *bus_prev; + struct resource_node *new_io = NULL; + struct resource_node *new_mem = NULL; + struct resource_node *new_pfmem = NULL; + int rc; + + list_for_each_entry(curr, &ibmphp_ebda_pci_rsrc_head, + ebda_pci_rsrc_list) { + if (!(curr->rsrc_type & PCIDEVMASK)) { + /* EBDA still lists non PCI devices, so ignore... */ + debug("this is not a PCI DEVICE in rsrc_init, please take care\n"); + // continue; + } + + /* this is a primary bus resource */ + if (curr->rsrc_type & PRIMARYBUSMASK) { + /* memory */ + if ((curr->rsrc_type & RESTYPE) == MMASK) { + /* no bus structure exists in place yet */ + if (list_empty(&gbuses)) { + rc = alloc_bus_range(&newbus, &newrange, curr, MEM, 1); + if (rc) + return rc; + list_add_tail(&newbus->bus_list, &gbuses); + debug("gbuses = NULL, Memory Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end); + } else { + bus_cur = find_bus_wprev(curr->bus_num, &bus_prev, 1); + /* found our bus */ + if (bus_cur) { + rc = alloc_bus_range(&bus_cur, &newrange, curr, MEM, 0); + if (rc) + return rc; + } else { + /* went through all the buses and didn't find ours, need to create a new bus node */ + rc = alloc_bus_range(&newbus, &newrange, curr, MEM, 1); + if (rc) + return rc; + + list_add_tail(&newbus->bus_list, &gbuses); + debug("New Bus, Memory Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end); + } + } + } else if ((curr->rsrc_type & RESTYPE) == PFMASK) { + /* prefetchable memory */ + if (list_empty(&gbuses)) { + /* no bus structure exists in place yet */ + rc = alloc_bus_range(&newbus, &newrange, curr, PFMEM, 1); + if (rc) + return rc; + list_add_tail(&newbus->bus_list, &gbuses); + debug("gbuses = NULL, PFMemory Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end); + } else { + bus_cur = find_bus_wprev(curr->bus_num, &bus_prev, 1); + if (bus_cur) { + /* found our bus */ + rc = alloc_bus_range(&bus_cur, &newrange, curr, PFMEM, 0); + if (rc) + return rc; + } else { + /* went through all the buses and didn't find ours, need to create a new bus node */ + rc = alloc_bus_range(&newbus, &newrange, curr, PFMEM, 1); + if (rc) + return rc; + list_add_tail(&newbus->bus_list, &gbuses); + debug("1st Bus, PFMemory Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end); + } + } + } else if ((curr->rsrc_type & RESTYPE) == IOMASK) { + /* IO */ + if (list_empty(&gbuses)) { + /* no bus structure exists in place yet */ + rc = alloc_bus_range(&newbus, &newrange, curr, IO, 1); + if (rc) + return rc; + list_add_tail(&newbus->bus_list, &gbuses); + debug("gbuses = NULL, IO Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end); + } else { + bus_cur = find_bus_wprev(curr->bus_num, &bus_prev, 1); + if (bus_cur) { + rc = alloc_bus_range(&bus_cur, &newrange, curr, IO, 0); + if (rc) + return rc; + } else { + /* went through all the buses and didn't find ours, need to create a new bus node */ + rc = alloc_bus_range(&newbus, &newrange, curr, IO, 1); + if (rc) + return rc; + list_add_tail(&newbus->bus_list, &gbuses); + debug("1st Bus, IO Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end); + } + } + + } else { + ; /* type is reserved WHAT TO DO IN THIS CASE??? + NOTHING TO DO??? */ + } + } else { + /* regular pci device resource */ + if ((curr->rsrc_type & RESTYPE) == MMASK) { + /* Memory resource */ + new_mem = alloc_resources(curr); + if (!new_mem) + return -ENOMEM; + new_mem->type = MEM; + /* + * if it didn't find the bus, means PCI dev + * came b4 the Primary Bus info, so need to + * create a bus rangeno becomes a problem... + * assign a -1 and then update once the range + * actually appears... + */ + if (ibmphp_add_resource(new_mem) < 0) { + newbus = alloc_error_bus(curr, 0, 0); + if (!newbus) + return -ENOMEM; + newbus->firstMem = new_mem; + ++newbus->needMemUpdate; + new_mem->rangeno = -1; + } + debug("Memory resource for device %x, bus %x, [%x - %x]\n", new_mem->devfunc, new_mem->busno, new_mem->start, new_mem->end); + + } else if ((curr->rsrc_type & RESTYPE) == PFMASK) { + /* PFMemory resource */ + new_pfmem = alloc_resources(curr); + if (!new_pfmem) + return -ENOMEM; + new_pfmem->type = PFMEM; + new_pfmem->fromMem = 0; + if (ibmphp_add_resource(new_pfmem) < 0) { + newbus = alloc_error_bus(curr, 0, 0); + if (!newbus) + return -ENOMEM; + newbus->firstPFMem = new_pfmem; + ++newbus->needPFMemUpdate; + new_pfmem->rangeno = -1; + } + + debug("PFMemory resource for device %x, bus %x, [%x - %x]\n", new_pfmem->devfunc, new_pfmem->busno, new_pfmem->start, new_pfmem->end); + } else if ((curr->rsrc_type & RESTYPE) == IOMASK) { + /* IO resource */ + new_io = alloc_resources(curr); + if (!new_io) + return -ENOMEM; + new_io->type = IO; + + /* + * if it didn't find the bus, means PCI dev + * came b4 the Primary Bus info, so need to + * create a bus rangeno becomes a problem... + * Can assign a -1 and then update once the + * range actually appears... + */ + if (ibmphp_add_resource(new_io) < 0) { + newbus = alloc_error_bus(curr, 0, 0); + if (!newbus) + return -ENOMEM; + newbus->firstIO = new_io; + ++newbus->needIOUpdate; + new_io->rangeno = -1; + } + debug("IO resource for device %x, bus %x, [%x - %x]\n", new_io->devfunc, new_io->busno, new_io->start, new_io->end); + } + } + } + + list_for_each_entry(bus_cur, &gbuses, bus_list) { + /* This is to get info about PPB resources, since EBDA doesn't put this info into the primary bus info */ + rc = update_bridge_ranges(&bus_cur); + if (rc) + return rc; + } + return once_over(); /* This is to align ranges (so no -1) */ +} + +/******************************************************************************** + * This function adds a range into a sorted list of ranges per bus for a particular + * range type, it then calls another routine to update the range numbers on the + * pci devices' resources for the appropriate resource + * + * Input: type of the resource, range to add, current bus + * Output: 0 or -1, bus and range ptrs + ********************************************************************************/ +static int add_bus_range(int type, struct range_node *range, struct bus_node *bus_cur) +{ + struct range_node *range_cur = NULL; + struct range_node *range_prev; + int count = 0, i_init; + int noRanges = 0; + + switch (type) { + case MEM: + range_cur = bus_cur->rangeMem; + noRanges = bus_cur->noMemRanges; + break; + case PFMEM: + range_cur = bus_cur->rangePFMem; + noRanges = bus_cur->noPFMemRanges; + break; + case IO: + range_cur = bus_cur->rangeIO; + noRanges = bus_cur->noIORanges; + break; + } + + range_prev = NULL; + while (range_cur) { + if (range->start < range_cur->start) + break; + range_prev = range_cur; + range_cur = range_cur->next; + count = count + 1; + } + if (!count) { + /* our range will go at the beginning of the list */ + switch (type) { + case MEM: + bus_cur->rangeMem = range; + break; + case PFMEM: + bus_cur->rangePFMem = range; + break; + case IO: + bus_cur->rangeIO = range; + break; + } + range->next = range_cur; + range->rangeno = 1; + i_init = 0; + } else if (!range_cur) { + /* our range will go at the end of the list */ + range->next = NULL; + range_prev->next = range; + range->rangeno = range_prev->rangeno + 1; + return 0; + } else { + /* the range is in the middle */ + range_prev->next = range; + range->next = range_cur; + range->rangeno = range_cur->rangeno; + i_init = range_prev->rangeno; + } + + for (count = i_init; count < noRanges; ++count) { + ++range_cur->rangeno; + range_cur = range_cur->next; + } + + update_resources(bus_cur, type, i_init + 1); + return 0; +} + +/******************************************************************************* + * This routine goes through the list of resources of type 'type' and updates + * the range numbers that they correspond to. It was called from add_bus_range fnc + * + * Input: bus, type of the resource, the rangeno starting from which to update + ******************************************************************************/ +static void update_resources(struct bus_node *bus_cur, int type, int rangeno) +{ + struct resource_node *res = NULL; + u8 eol = 0; /* end of list indicator */ + + switch (type) { + case MEM: + if (bus_cur->firstMem) + res = bus_cur->firstMem; + break; + case PFMEM: + if (bus_cur->firstPFMem) + res = bus_cur->firstPFMem; + break; + case IO: + if (bus_cur->firstIO) + res = bus_cur->firstIO; + break; + } + + if (res) { + while (res) { + if (res->rangeno == rangeno) + break; + if (res->next) + res = res->next; + else if (res->nextRange) + res = res->nextRange; + else { + eol = 1; + break; + } + } + + if (!eol) { + /* found the range */ + while (res) { + ++res->rangeno; + res = res->next; + } + } + } +} + +static void fix_me(struct resource_node *res, struct bus_node *bus_cur, struct range_node *range) +{ + char *str = ""; + switch (res->type) { + case IO: + str = "io"; + break; + case MEM: + str = "mem"; + break; + case PFMEM: + str = "pfmem"; + break; + } + + while (res) { + if (res->rangeno == -1) { + while (range) { + if ((res->start >= range->start) && (res->end <= range->end)) { + res->rangeno = range->rangeno; + debug("%s->rangeno in fix_resources is %d\n", str, res->rangeno); + switch (res->type) { + case IO: + --bus_cur->needIOUpdate; + break; + case MEM: + --bus_cur->needMemUpdate; + break; + case PFMEM: + --bus_cur->needPFMemUpdate; + break; + } + break; + } + range = range->next; + } + } + if (res->next) + res = res->next; + else + res = res->nextRange; + } + +} + +/***************************************************************************** + * This routine reassigns the range numbers to the resources that had a -1 + * This case can happen only if upon initialization, resources taken by pci dev + * appear in EBDA before the resources allocated for that bus, since we don't + * know the range, we assign -1, and this routine is called after a new range + * is assigned to see the resources with unknown range belong to the added range + * + * Input: current bus + * Output: none, list of resources for that bus are fixed if can be + *******************************************************************************/ +static void fix_resources(struct bus_node *bus_cur) +{ + struct range_node *range; + struct resource_node *res; + + debug("%s - bus_cur->busno = %d\n", __func__, bus_cur->busno); + + if (bus_cur->needIOUpdate) { + res = bus_cur->firstIO; + range = bus_cur->rangeIO; + fix_me(res, bus_cur, range); + } + if (bus_cur->needMemUpdate) { + res = bus_cur->firstMem; + range = bus_cur->rangeMem; + fix_me(res, bus_cur, range); + } + if (bus_cur->needPFMemUpdate) { + res = bus_cur->firstPFMem; + range = bus_cur->rangePFMem; + fix_me(res, bus_cur, range); + } +} + +/******************************************************************************* + * This routine adds a resource to the list of resources to the appropriate bus + * based on their resource type and sorted by their starting addresses. It assigns + * the ptrs to next and nextRange if needed. + * + * Input: resource ptr + * Output: ptrs assigned (to the node) + * 0 or -1 + *******************************************************************************/ +int ibmphp_add_resource(struct resource_node *res) +{ + struct resource_node *res_cur; + struct resource_node *res_prev; + struct bus_node *bus_cur; + struct range_node *range_cur = NULL; + struct resource_node *res_start = NULL; + + debug("%s - enter\n", __func__); + + if (!res) { + err("NULL passed to add\n"); + return -ENODEV; + } + + bus_cur = find_bus_wprev(res->busno, NULL, 0); + + if (!bus_cur) { + /* didn't find a bus, something's wrong!!! */ + debug("no bus in the system, either pci_dev's wrong or allocation failed\n"); + return -ENODEV; + } + + /* Normal case */ + switch (res->type) { + case IO: + range_cur = bus_cur->rangeIO; + res_start = bus_cur->firstIO; + break; + case MEM: + range_cur = bus_cur->rangeMem; + res_start = bus_cur->firstMem; + break; + case PFMEM: + range_cur = bus_cur->rangePFMem; + res_start = bus_cur->firstPFMem; + break; + default: + err("cannot read the type of the resource to add... problem\n"); + return -EINVAL; + } + while (range_cur) { + if ((res->start >= range_cur->start) && (res->end <= range_cur->end)) { + res->rangeno = range_cur->rangeno; + break; + } + range_cur = range_cur->next; + } + + /* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! + * this is again the case of rangeno = -1 + * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! + */ + + if (!range_cur) { + switch (res->type) { + case IO: + ++bus_cur->needIOUpdate; + break; + case MEM: + ++bus_cur->needMemUpdate; + break; + case PFMEM: + ++bus_cur->needPFMemUpdate; + break; + } + res->rangeno = -1; + } + + debug("The range is %d\n", res->rangeno); + if (!res_start) { + /* no first{IO,Mem,Pfmem} on the bus, 1st IO/Mem/Pfmem resource ever */ + switch (res->type) { + case IO: + bus_cur->firstIO = res; + break; + case MEM: + bus_cur->firstMem = res; + break; + case PFMEM: + bus_cur->firstPFMem = res; + break; + } + res->next = NULL; + res->nextRange = NULL; + } else { + res_cur = res_start; + res_prev = NULL; + + debug("res_cur->rangeno is %d\n", res_cur->rangeno); + + while (res_cur) { + if (res_cur->rangeno >= res->rangeno) + break; + res_prev = res_cur; + if (res_cur->next) + res_cur = res_cur->next; + else + res_cur = res_cur->nextRange; + } + + if (!res_cur) { + /* at the end of the resource list */ + debug("i should be here, [%x - %x]\n", res->start, res->end); + res_prev->nextRange = res; + res->next = NULL; + res->nextRange = NULL; + } else if (res_cur->rangeno == res->rangeno) { + /* in the same range */ + while (res_cur) { + if (res->start < res_cur->start) + break; + res_prev = res_cur; + res_cur = res_cur->next; + } + if (!res_cur) { + /* the last resource in this range */ + res_prev->next = res; + res->next = NULL; + res->nextRange = res_prev->nextRange; + res_prev->nextRange = NULL; + } else if (res->start < res_cur->start) { + /* at the beginning or middle of the range */ + if (!res_prev) { + switch (res->type) { + case IO: + bus_cur->firstIO = res; + break; + case MEM: + bus_cur->firstMem = res; + break; + case PFMEM: + bus_cur->firstPFMem = res; + break; + } + } else if (res_prev->rangeno == res_cur->rangeno) + res_prev->next = res; + else + res_prev->nextRange = res; + + res->next = res_cur; + res->nextRange = NULL; + } + } else { + /* this is the case where it is 1st occurrence of the range */ + if (!res_prev) { + /* at the beginning of the resource list */ + res->next = NULL; + switch (res->type) { + case IO: + res->nextRange = bus_cur->firstIO; + bus_cur->firstIO = res; + break; + case MEM: + res->nextRange = bus_cur->firstMem; + bus_cur->firstMem = res; + break; + case PFMEM: + res->nextRange = bus_cur->firstPFMem; + bus_cur->firstPFMem = res; + break; + } + } else if (res_cur->rangeno > res->rangeno) { + /* in the middle of the resource list */ + res_prev->nextRange = res; + res->next = NULL; + res->nextRange = res_cur; + } + } + } + + debug("%s - exit\n", __func__); + return 0; +} + +/**************************************************************************** + * This routine will remove the resource from the list of resources + * + * Input: io, mem, and/or pfmem resource to be deleted + * Output: modified resource list + * 0 or error code + ****************************************************************************/ +int ibmphp_remove_resource(struct resource_node *res) +{ + struct bus_node *bus_cur; + struct resource_node *res_cur = NULL; + struct resource_node *res_prev; + struct resource_node *mem_cur; + char *type = ""; + + if (!res) { + err("resource to remove is NULL\n"); + return -ENODEV; + } + + bus_cur = find_bus_wprev(res->busno, NULL, 0); + + if (!bus_cur) { + err("cannot find corresponding bus of the io resource to remove bailing out...\n"); + return -ENODEV; + } + + switch (res->type) { + case IO: + res_cur = bus_cur->firstIO; + type = "io"; + break; + case MEM: + res_cur = bus_cur->firstMem; + type = "mem"; + break; + case PFMEM: + res_cur = bus_cur->firstPFMem; + type = "pfmem"; + break; + default: + err("unknown type for resource to remove\n"); + return -EINVAL; + } + res_prev = NULL; + + while (res_cur) { + if ((res_cur->start == res->start) && (res_cur->end == res->end)) + break; + res_prev = res_cur; + if (res_cur->next) + res_cur = res_cur->next; + else + res_cur = res_cur->nextRange; + } + + if (!res_cur) { + if (res->type == PFMEM) { + /* + * case where pfmem might be in the PFMemFromMem list + * so will also need to remove the corresponding mem + * entry + */ + res_cur = bus_cur->firstPFMemFromMem; + res_prev = NULL; + + while (res_cur) { + if ((res_cur->start == res->start) && (res_cur->end == res->end)) { + mem_cur = bus_cur->firstMem; + while (mem_cur) { + if ((mem_cur->start == res_cur->start) + && (mem_cur->end == res_cur->end)) + break; + if (mem_cur->next) + mem_cur = mem_cur->next; + else + mem_cur = mem_cur->nextRange; + } + if (!mem_cur) { + err("cannot find corresponding mem node for pfmem...\n"); + return -EINVAL; + } + + ibmphp_remove_resource(mem_cur); + if (!res_prev) + bus_cur->firstPFMemFromMem = res_cur->next; + else + res_prev->next = res_cur->next; + kfree(res_cur); + return 0; + } + res_prev = res_cur; + if (res_cur->next) + res_cur = res_cur->next; + else + res_cur = res_cur->nextRange; + } + if (!res_cur) { + err("cannot find pfmem to delete...\n"); + return -EINVAL; + } + } else { + err("the %s resource is not in the list to be deleted...\n", type); + return -EINVAL; + } + } + if (!res_prev) { + /* first device to be deleted */ + if (res_cur->next) { + switch (res->type) { + case IO: + bus_cur->firstIO = res_cur->next; + break; + case MEM: + bus_cur->firstMem = res_cur->next; + break; + case PFMEM: + bus_cur->firstPFMem = res_cur->next; + break; + } + } else if (res_cur->nextRange) { + switch (res->type) { + case IO: + bus_cur->firstIO = res_cur->nextRange; + break; + case MEM: + bus_cur->firstMem = res_cur->nextRange; + break; + case PFMEM: + bus_cur->firstPFMem = res_cur->nextRange; + break; + } + } else { + switch (res->type) { + case IO: + bus_cur->firstIO = NULL; + break; + case MEM: + bus_cur->firstMem = NULL; + break; + case PFMEM: + bus_cur->firstPFMem = NULL; + break; + } + } + kfree(res_cur); + return 0; + } else { + if (res_cur->next) { + if (res_prev->rangeno == res_cur->rangeno) + res_prev->next = res_cur->next; + else + res_prev->nextRange = res_cur->next; + } else if (res_cur->nextRange) { + res_prev->next = NULL; + res_prev->nextRange = res_cur->nextRange; + } else { + res_prev->next = NULL; + res_prev->nextRange = NULL; + } + kfree(res_cur); + return 0; + } + + return 0; +} + +static struct range_node *find_range(struct bus_node *bus_cur, struct resource_node *res) +{ + struct range_node *range = NULL; + + switch (res->type) { + case IO: + range = bus_cur->rangeIO; + break; + case MEM: + range = bus_cur->rangeMem; + break; + case PFMEM: + range = bus_cur->rangePFMem; + break; + default: + err("cannot read resource type in find_range\n"); + } + + while (range) { + if (res->rangeno == range->rangeno) + break; + range = range->next; + } + return range; +} + +/***************************************************************************** + * This routine will check to make sure the io/mem/pfmem->len that the device asked for + * can fit w/i our list of available IO/MEM/PFMEM resources. If cannot, returns -EINVAL, + * otherwise, returns 0 + * + * Input: resource + * Output: the correct start and end address are inputted into the resource node, + * 0 or -EINVAL + *****************************************************************************/ +int ibmphp_check_resource(struct resource_node *res, u8 bridge) +{ + struct bus_node *bus_cur; + struct range_node *range = NULL; + struct resource_node *res_prev; + struct resource_node *res_cur = NULL; + u32 len_cur = 0, start_cur = 0, len_tmp = 0; + int noranges = 0; + u32 tmp_start; /* this is to make sure start address is divisible by the length needed */ + u32 tmp_divide; + u8 flag = 0; + + if (!res) + return -EINVAL; + + if (bridge) { + /* The rules for bridges are different, 4K divisible for IO, 1M for (pf)mem*/ + if (res->type == IO) + tmp_divide = IOBRIDGE; + else + tmp_divide = MEMBRIDGE; + } else + tmp_divide = res->len; + + bus_cur = find_bus_wprev(res->busno, NULL, 0); + + if (!bus_cur) { + /* didn't find a bus, something's wrong!!! */ + debug("no bus in the system, either pci_dev's wrong or allocation failed\n"); + return -EINVAL; + } + + debug("%s - enter\n", __func__); + debug("bus_cur->busno is %d\n", bus_cur->busno); + + /* This is a quick fix to not mess up with the code very much. i.e., + * 2000-2fff, len = 1000, but when we compare, we need it to be fff */ + res->len -= 1; + + switch (res->type) { + case IO: + res_cur = bus_cur->firstIO; + noranges = bus_cur->noIORanges; + break; + case MEM: + res_cur = bus_cur->firstMem; + noranges = bus_cur->noMemRanges; + break; + case PFMEM: + res_cur = bus_cur->firstPFMem; + noranges = bus_cur->noPFMemRanges; + break; + default: + err("wrong type of resource to check\n"); + return -EINVAL; + } + res_prev = NULL; + + while (res_cur) { + range = find_range(bus_cur, res_cur); + debug("%s - rangeno = %d\n", __func__, res_cur->rangeno); + + if (!range) { + err("no range for the device exists... bailing out...\n"); + return -EINVAL; + } + + /* found our range */ + if (!res_prev) { + /* first time in the loop */ + len_tmp = res_cur->start - 1 - range->start; + + if ((res_cur->start != range->start) && (len_tmp >= res->len)) { + debug("len_tmp = %x\n", len_tmp); + + if ((len_tmp < len_cur) || (len_cur == 0)) { + + if ((range->start % tmp_divide) == 0) { + /* just perfect, starting address is divisible by length */ + flag = 1; + len_cur = len_tmp; + start_cur = range->start; + } else { + /* Needs adjusting */ + tmp_start = range->start; + flag = 0; + + while ((len_tmp = res_cur->start - 1 - tmp_start) >= res->len) { + if ((tmp_start % tmp_divide) == 0) { + flag = 1; + len_cur = len_tmp; + start_cur = tmp_start; + break; + } + tmp_start += tmp_divide - tmp_start % tmp_divide; + if (tmp_start >= res_cur->start - 1) + break; + } + } + + if (flag && len_cur == res->len) { + debug("but we are not here, right?\n"); + res->start = start_cur; + res->len += 1; /* To restore the balance */ + res->end = res->start + res->len - 1; + return 0; + } + } + } + } + if (!res_cur->next) { + /* last device on the range */ + len_tmp = range->end - (res_cur->end + 1); + + if ((range->end != res_cur->end) && (len_tmp >= res->len)) { + debug("len_tmp = %x\n", len_tmp); + if ((len_tmp < len_cur) || (len_cur == 0)) { + + if (((res_cur->end + 1) % tmp_divide) == 0) { + /* just perfect, starting address is divisible by length */ + flag = 1; + len_cur = len_tmp; + start_cur = res_cur->end + 1; + } else { + /* Needs adjusting */ + tmp_start = res_cur->end + 1; + flag = 0; + + while ((len_tmp = range->end - tmp_start) >= res->len) { + if ((tmp_start % tmp_divide) == 0) { + flag = 1; + len_cur = len_tmp; + start_cur = tmp_start; + break; + } + tmp_start += tmp_divide - tmp_start % tmp_divide; + if (tmp_start >= range->end) + break; + } + } + if (flag && len_cur == res->len) { + res->start = start_cur; + res->len += 1; /* To restore the balance */ + res->end = res->start + res->len - 1; + return 0; + } + } + } + } + + if (res_prev) { + if (res_prev->rangeno != res_cur->rangeno) { + /* 1st device on this range */ + len_tmp = res_cur->start - 1 - range->start; + + if ((res_cur->start != range->start) && (len_tmp >= res->len)) { + if ((len_tmp < len_cur) || (len_cur == 0)) { + if ((range->start % tmp_divide) == 0) { + /* just perfect, starting address is divisible by length */ + flag = 1; + len_cur = len_tmp; + start_cur = range->start; + } else { + /* Needs adjusting */ + tmp_start = range->start; + flag = 0; + + while ((len_tmp = res_cur->start - 1 - tmp_start) >= res->len) { + if ((tmp_start % tmp_divide) == 0) { + flag = 1; + len_cur = len_tmp; + start_cur = tmp_start; + break; + } + tmp_start += tmp_divide - tmp_start % tmp_divide; + if (tmp_start >= res_cur->start - 1) + break; + } + } + + if (flag && len_cur == res->len) { + res->start = start_cur; + res->len += 1; /* To restore the balance */ + res->end = res->start + res->len - 1; + return 0; + } + } + } + } else { + /* in the same range */ + len_tmp = res_cur->start - 1 - res_prev->end - 1; + + if (len_tmp >= res->len) { + if ((len_tmp < len_cur) || (len_cur == 0)) { + if (((res_prev->end + 1) % tmp_divide) == 0) { + /* just perfect, starting address's divisible by length */ + flag = 1; + len_cur = len_tmp; + start_cur = res_prev->end + 1; + } else { + /* Needs adjusting */ + tmp_start = res_prev->end + 1; + flag = 0; + + while ((len_tmp = res_cur->start - 1 - tmp_start) >= res->len) { + if ((tmp_start % tmp_divide) == 0) { + flag = 1; + len_cur = len_tmp; + start_cur = tmp_start; + break; + } + tmp_start += tmp_divide - tmp_start % tmp_divide; + if (tmp_start >= res_cur->start - 1) + break; + } + } + + if (flag && len_cur == res->len) { + res->start = start_cur; + res->len += 1; /* To restore the balance */ + res->end = res->start + res->len - 1; + return 0; + } + } + } + } + } + /* end if (res_prev) */ + res_prev = res_cur; + if (res_cur->next) + res_cur = res_cur->next; + else + res_cur = res_cur->nextRange; + } /* end of while */ + + + if (!res_prev) { + /* 1st device ever */ + /* need to find appropriate range */ + switch (res->type) { + case IO: + range = bus_cur->rangeIO; + break; + case MEM: + range = bus_cur->rangeMem; + break; + case PFMEM: + range = bus_cur->rangePFMem; + break; + } + while (range) { + len_tmp = range->end - range->start; + + if (len_tmp >= res->len) { + if ((len_tmp < len_cur) || (len_cur == 0)) { + if ((range->start % tmp_divide) == 0) { + /* just perfect, starting address's divisible by length */ + flag = 1; + len_cur = len_tmp; + start_cur = range->start; + } else { + /* Needs adjusting */ + tmp_start = range->start; + flag = 0; + + while ((len_tmp = range->end - tmp_start) >= res->len) { + if ((tmp_start % tmp_divide) == 0) { + flag = 1; + len_cur = len_tmp; + start_cur = tmp_start; + break; + } + tmp_start += tmp_divide - tmp_start % tmp_divide; + if (tmp_start >= range->end) + break; + } + } + + if (flag && len_cur == res->len) { + res->start = start_cur; + res->len += 1; /* To restore the balance */ + res->end = res->start + res->len - 1; + return 0; + } + } + } + range = range->next; + } /* end of while */ + + if ((!range) && (len_cur == 0)) { + /* have gone through the list of devices and ranges and haven't found n.e.thing */ + err("no appropriate range.. bailing out...\n"); + return -EINVAL; + } else if (len_cur) { + res->start = start_cur; + res->len += 1; /* To restore the balance */ + res->end = res->start + res->len - 1; + return 0; + } + } + + if (!res_cur) { + debug("prev->rangeno = %d, noranges = %d\n", res_prev->rangeno, noranges); + if (res_prev->rangeno < noranges) { + /* if there're more ranges out there to check */ + switch (res->type) { + case IO: + range = bus_cur->rangeIO; + break; + case MEM: + range = bus_cur->rangeMem; + break; + case PFMEM: + range = bus_cur->rangePFMem; + break; + } + while (range) { + len_tmp = range->end - range->start; + + if (len_tmp >= res->len) { + if ((len_tmp < len_cur) || (len_cur == 0)) { + if ((range->start % tmp_divide) == 0) { + /* just perfect, starting address's divisible by length */ + flag = 1; + len_cur = len_tmp; + start_cur = range->start; + } else { + /* Needs adjusting */ + tmp_start = range->start; + flag = 0; + + while ((len_tmp = range->end - tmp_start) >= res->len) { + if ((tmp_start % tmp_divide) == 0) { + flag = 1; + len_cur = len_tmp; + start_cur = tmp_start; + break; + } + tmp_start += tmp_divide - tmp_start % tmp_divide; + if (tmp_start >= range->end) + break; + } + } + + if (flag && len_cur == res->len) { + res->start = start_cur; + res->len += 1; /* To restore the balance */ + res->end = res->start + res->len - 1; + return 0; + } + } + } + range = range->next; + } /* end of while */ + + if ((!range) && (len_cur == 0)) { + /* have gone through the list of devices and ranges and haven't found n.e.thing */ + err("no appropriate range.. bailing out...\n"); + return -EINVAL; + } else if (len_cur) { + res->start = start_cur; + res->len += 1; /* To restore the balance */ + res->end = res->start + res->len - 1; + return 0; + } + } else { + /* no more ranges to check on */ + if (len_cur) { + res->start = start_cur; + res->len += 1; /* To restore the balance */ + res->end = res->start + res->len - 1; + return 0; + } else { + /* have gone through the list of devices and haven't found n.e.thing */ + err("no appropriate range.. bailing out...\n"); + return -EINVAL; + } + } + } /* end if (!res_cur) */ + return -EINVAL; +} + +/******************************************************************************** + * This routine is called from remove_card if the card contained PPB. + * It will remove all the resources on the bus as well as the bus itself + * Input: Bus + * Output: 0, -ENODEV + ********************************************************************************/ +int ibmphp_remove_bus(struct bus_node *bus, u8 parent_busno) +{ + struct resource_node *res_cur; + struct resource_node *res_tmp; + struct bus_node *prev_bus; + int rc; + + prev_bus = find_bus_wprev(parent_busno, NULL, 0); + + if (!prev_bus) { + debug("something terribly wrong. Cannot find parent bus to the one to remove\n"); + return -ENODEV; + } + + debug("In ibmphp_remove_bus... prev_bus->busno is %x\n", prev_bus->busno); + + rc = remove_ranges(bus, prev_bus); + if (rc) + return rc; + + if (bus->firstIO) { + res_cur = bus->firstIO; + while (res_cur) { + res_tmp = res_cur; + if (res_cur->next) + res_cur = res_cur->next; + else + res_cur = res_cur->nextRange; + kfree(res_tmp); + res_tmp = NULL; + } + bus->firstIO = NULL; + } + if (bus->firstMem) { + res_cur = bus->firstMem; + while (res_cur) { + res_tmp = res_cur; + if (res_cur->next) + res_cur = res_cur->next; + else + res_cur = res_cur->nextRange; + kfree(res_tmp); + res_tmp = NULL; + } + bus->firstMem = NULL; + } + if (bus->firstPFMem) { + res_cur = bus->firstPFMem; + while (res_cur) { + res_tmp = res_cur; + if (res_cur->next) + res_cur = res_cur->next; + else + res_cur = res_cur->nextRange; + kfree(res_tmp); + res_tmp = NULL; + } + bus->firstPFMem = NULL; + } + + if (bus->firstPFMemFromMem) { + res_cur = bus->firstPFMemFromMem; + while (res_cur) { + res_tmp = res_cur; + res_cur = res_cur->next; + + kfree(res_tmp); + res_tmp = NULL; + } + bus->firstPFMemFromMem = NULL; + } + + list_del(&bus->bus_list); + kfree(bus); + return 0; +} + +/****************************************************************************** + * This routine deletes the ranges from a given bus, and the entries from the + * parent's bus in the resources + * Input: current bus, previous bus + * Output: 0, -EINVAL + ******************************************************************************/ +static int remove_ranges(struct bus_node *bus_cur, struct bus_node *bus_prev) +{ + struct range_node *range_cur; + struct range_node *range_tmp; + int i; + struct resource_node *res = NULL; + + if (bus_cur->noIORanges) { + range_cur = bus_cur->rangeIO; + for (i = 0; i < bus_cur->noIORanges; i++) { + if (ibmphp_find_resource(bus_prev, range_cur->start, &res, IO) < 0) + return -EINVAL; + ibmphp_remove_resource(res); + + range_tmp = range_cur; + range_cur = range_cur->next; + kfree(range_tmp); + range_tmp = NULL; + } + bus_cur->rangeIO = NULL; + } + if (bus_cur->noMemRanges) { + range_cur = bus_cur->rangeMem; + for (i = 0; i < bus_cur->noMemRanges; i++) { + if (ibmphp_find_resource(bus_prev, range_cur->start, &res, MEM) < 0) + return -EINVAL; + + ibmphp_remove_resource(res); + range_tmp = range_cur; + range_cur = range_cur->next; + kfree(range_tmp); + range_tmp = NULL; + } + bus_cur->rangeMem = NULL; + } + if (bus_cur->noPFMemRanges) { + range_cur = bus_cur->rangePFMem; + for (i = 0; i < bus_cur->noPFMemRanges; i++) { + if (ibmphp_find_resource(bus_prev, range_cur->start, &res, PFMEM) < 0) + return -EINVAL; + + ibmphp_remove_resource(res); + range_tmp = range_cur; + range_cur = range_cur->next; + kfree(range_tmp); + range_tmp = NULL; + } + bus_cur->rangePFMem = NULL; + } + return 0; +} + +/* + * find the resource node in the bus + * Input: Resource needed, start address of the resource, type of resource + */ +int ibmphp_find_resource(struct bus_node *bus, u32 start_address, struct resource_node **res, int flag) +{ + struct resource_node *res_cur = NULL; + char *type = ""; + + if (!bus) { + err("The bus passed in NULL to find resource\n"); + return -ENODEV; + } + + switch (flag) { + case IO: + res_cur = bus->firstIO; + type = "io"; + break; + case MEM: + res_cur = bus->firstMem; + type = "mem"; + break; + case PFMEM: + res_cur = bus->firstPFMem; + type = "pfmem"; + break; + default: + err("wrong type of flag\n"); + return -EINVAL; + } + + while (res_cur) { + if (res_cur->start == start_address) { + *res = res_cur; + break; + } + if (res_cur->next) + res_cur = res_cur->next; + else + res_cur = res_cur->nextRange; + } + + if (!res_cur) { + if (flag == PFMEM) { + res_cur = bus->firstPFMemFromMem; + while (res_cur) { + if (res_cur->start == start_address) { + *res = res_cur; + break; + } + res_cur = res_cur->next; + } + if (!res_cur) { + debug("SOS...cannot find %s resource in the bus.\n", type); + return -EINVAL; + } + } else { + debug("SOS... cannot find %s resource in the bus.\n", type); + return -EINVAL; + } + } + + if (*res) + debug("*res->start = %x\n", (*res)->start); + + return 0; +} + +/*********************************************************************** + * This routine will free the resource structures used by the + * system. It is called from cleanup routine for the module + * Parameters: none + * Returns: none + ***********************************************************************/ +void ibmphp_free_resources(void) +{ + struct bus_node *bus_cur = NULL, *next; + struct bus_node *bus_tmp; + struct range_node *range_cur; + struct range_node *range_tmp; + struct resource_node *res_cur; + struct resource_node *res_tmp; + int i = 0; + flags = 1; + + list_for_each_entry_safe(bus_cur, next, &gbuses, bus_list) { + if (bus_cur->noIORanges) { + range_cur = bus_cur->rangeIO; + for (i = 0; i < bus_cur->noIORanges; i++) { + if (!range_cur) + break; + range_tmp = range_cur; + range_cur = range_cur->next; + kfree(range_tmp); + range_tmp = NULL; + } + } + if (bus_cur->noMemRanges) { + range_cur = bus_cur->rangeMem; + for (i = 0; i < bus_cur->noMemRanges; i++) { + if (!range_cur) + break; + range_tmp = range_cur; + range_cur = range_cur->next; + kfree(range_tmp); + range_tmp = NULL; + } + } + if (bus_cur->noPFMemRanges) { + range_cur = bus_cur->rangePFMem; + for (i = 0; i < bus_cur->noPFMemRanges; i++) { + if (!range_cur) + break; + range_tmp = range_cur; + range_cur = range_cur->next; + kfree(range_tmp); + range_tmp = NULL; + } + } + + if (bus_cur->firstIO) { + res_cur = bus_cur->firstIO; + while (res_cur) { + res_tmp = res_cur; + if (res_cur->next) + res_cur = res_cur->next; + else + res_cur = res_cur->nextRange; + kfree(res_tmp); + res_tmp = NULL; + } + bus_cur->firstIO = NULL; + } + if (bus_cur->firstMem) { + res_cur = bus_cur->firstMem; + while (res_cur) { + res_tmp = res_cur; + if (res_cur->next) + res_cur = res_cur->next; + else + res_cur = res_cur->nextRange; + kfree(res_tmp); + res_tmp = NULL; + } + bus_cur->firstMem = NULL; + } + if (bus_cur->firstPFMem) { + res_cur = bus_cur->firstPFMem; + while (res_cur) { + res_tmp = res_cur; + if (res_cur->next) + res_cur = res_cur->next; + else + res_cur = res_cur->nextRange; + kfree(res_tmp); + res_tmp = NULL; + } + bus_cur->firstPFMem = NULL; + } + + if (bus_cur->firstPFMemFromMem) { + res_cur = bus_cur->firstPFMemFromMem; + while (res_cur) { + res_tmp = res_cur; + res_cur = res_cur->next; + + kfree(res_tmp); + res_tmp = NULL; + } + bus_cur->firstPFMemFromMem = NULL; + } + + bus_tmp = bus_cur; + list_del(&bus_cur->bus_list); + kfree(bus_tmp); + bus_tmp = NULL; + } +} + +/********************************************************************************* + * This function will go over the PFmem resources to check if the EBDA allocated + * pfmem out of memory buckets of the bus. If so, it will change the range numbers + * and a flag to indicate that this resource is out of memory. It will also move the + * Pfmem out of the pfmem resource list to the PFMemFromMem list, and will create + * a new Mem node + * This routine is called right after initialization + *******************************************************************************/ +static int __init once_over(void) +{ + struct resource_node *pfmem_cur; + struct resource_node *pfmem_prev; + struct resource_node *mem; + struct bus_node *bus_cur; + + list_for_each_entry(bus_cur, &gbuses, bus_list) { + if ((!bus_cur->rangePFMem) && (bus_cur->firstPFMem)) { + for (pfmem_cur = bus_cur->firstPFMem, pfmem_prev = NULL; pfmem_cur; pfmem_prev = pfmem_cur, pfmem_cur = pfmem_cur->next) { + pfmem_cur->fromMem = 1; + if (pfmem_prev) + pfmem_prev->next = pfmem_cur->next; + else + bus_cur->firstPFMem = pfmem_cur->next; + + if (!bus_cur->firstPFMemFromMem) + pfmem_cur->next = NULL; + else + /* we don't need to sort PFMemFromMem since we're using mem node for + all the real work anyways, so just insert at the beginning of the + list + */ + pfmem_cur->next = bus_cur->firstPFMemFromMem; + + bus_cur->firstPFMemFromMem = pfmem_cur; + + mem = kzalloc(sizeof(struct resource_node), GFP_KERNEL); + if (!mem) + return -ENOMEM; + + mem->type = MEM; + mem->busno = pfmem_cur->busno; + mem->devfunc = pfmem_cur->devfunc; + mem->start = pfmem_cur->start; + mem->end = pfmem_cur->end; + mem->len = pfmem_cur->len; + if (ibmphp_add_resource(mem) < 0) + err("Trouble...trouble... EBDA allocated pfmem from mem, but system doesn't display it has this space... unless not PCI device...\n"); + pfmem_cur->rangeno = mem->rangeno; + } /* end for pfmem */ + } /* end if */ + } /* end list_for_each bus */ + return 0; +} + +int ibmphp_add_pfmem_from_mem(struct resource_node *pfmem) +{ + struct bus_node *bus_cur = find_bus_wprev(pfmem->busno, NULL, 0); + + if (!bus_cur) { + err("cannot find bus of pfmem to add...\n"); + return -ENODEV; + } + + if (bus_cur->firstPFMemFromMem) + pfmem->next = bus_cur->firstPFMemFromMem; + else + pfmem->next = NULL; + + bus_cur->firstPFMemFromMem = pfmem; + + return 0; +} + +/* This routine just goes through the buses to see if the bus already exists. + * It is called from ibmphp_find_sec_number, to find out a secondary bus number for + * bridged cards + * Parameters: bus_number + * Returns: Bus pointer or NULL + */ +struct bus_node *ibmphp_find_res_bus(u8 bus_number) +{ + return find_bus_wprev(bus_number, NULL, 0); +} + +static struct bus_node *find_bus_wprev(u8 bus_number, struct bus_node **prev, u8 flag) +{ + struct bus_node *bus_cur; + + list_for_each_entry(bus_cur, &gbuses, bus_list) { + if (flag) + *prev = list_prev_entry(bus_cur, bus_list); + if (bus_cur->busno == bus_number) + return bus_cur; + } + + return NULL; +} + +void ibmphp_print_test(void) +{ + int i = 0; + struct bus_node *bus_cur = NULL; + struct range_node *range; + struct resource_node *res; + + debug_pci("*****************START**********************\n"); + + if ((!list_empty(&gbuses)) && flags) { + err("The GBUSES is not NULL?!?!?!?!?\n"); + return; + } + + list_for_each_entry(bus_cur, &gbuses, bus_list) { + debug_pci ("This is bus # %d. There are\n", bus_cur->busno); + debug_pci ("IORanges = %d\t", bus_cur->noIORanges); + debug_pci ("MemRanges = %d\t", bus_cur->noMemRanges); + debug_pci ("PFMemRanges = %d\n", bus_cur->noPFMemRanges); + debug_pci ("The IO Ranges are as follows:\n"); + if (bus_cur->rangeIO) { + range = bus_cur->rangeIO; + for (i = 0; i < bus_cur->noIORanges; i++) { + debug_pci("rangeno is %d\n", range->rangeno); + debug_pci("[%x - %x]\n", range->start, range->end); + range = range->next; + } + } + + debug_pci("The Mem Ranges are as follows:\n"); + if (bus_cur->rangeMem) { + range = bus_cur->rangeMem; + for (i = 0; i < bus_cur->noMemRanges; i++) { + debug_pci("rangeno is %d\n", range->rangeno); + debug_pci("[%x - %x]\n", range->start, range->end); + range = range->next; + } + } + + debug_pci("The PFMem Ranges are as follows:\n"); + + if (bus_cur->rangePFMem) { + range = bus_cur->rangePFMem; + for (i = 0; i < bus_cur->noPFMemRanges; i++) { + debug_pci("rangeno is %d\n", range->rangeno); + debug_pci("[%x - %x]\n", range->start, range->end); + range = range->next; + } + } + + debug_pci("The resources on this bus are as follows\n"); + + debug_pci("IO...\n"); + if (bus_cur->firstIO) { + res = bus_cur->firstIO; + while (res) { + debug_pci("The range # is %d\n", res->rangeno); + debug_pci("The bus, devfnc is %d, %x\n", res->busno, res->devfunc); + debug_pci("[%x - %x], len=%x\n", res->start, res->end, res->len); + if (res->next) + res = res->next; + else if (res->nextRange) + res = res->nextRange; + else + break; + } + } + debug_pci("Mem...\n"); + if (bus_cur->firstMem) { + res = bus_cur->firstMem; + while (res) { + debug_pci("The range # is %d\n", res->rangeno); + debug_pci("The bus, devfnc is %d, %x\n", res->busno, res->devfunc); + debug_pci("[%x - %x], len=%x\n", res->start, res->end, res->len); + if (res->next) + res = res->next; + else if (res->nextRange) + res = res->nextRange; + else + break; + } + } + debug_pci("PFMem...\n"); + if (bus_cur->firstPFMem) { + res = bus_cur->firstPFMem; + while (res) { + debug_pci("The range # is %d\n", res->rangeno); + debug_pci("The bus, devfnc is %d, %x\n", res->busno, res->devfunc); + debug_pci("[%x - %x], len=%x\n", res->start, res->end, res->len); + if (res->next) + res = res->next; + else if (res->nextRange) + res = res->nextRange; + else + break; + } + } + + debug_pci("PFMemFromMem...\n"); + if (bus_cur->firstPFMemFromMem) { + res = bus_cur->firstPFMemFromMem; + while (res) { + debug_pci("The range # is %d\n", res->rangeno); + debug_pci("The bus, devfnc is %d, %x\n", res->busno, res->devfunc); + debug_pci("[%x - %x], len=%x\n", res->start, res->end, res->len); + res = res->next; + } + } + } + debug_pci("***********************END***********************\n"); +} + +static int range_exists_already(struct range_node *range, struct bus_node *bus_cur, u8 type) +{ + struct range_node *range_cur = NULL; + switch (type) { + case IO: + range_cur = bus_cur->rangeIO; + break; + case MEM: + range_cur = bus_cur->rangeMem; + break; + case PFMEM: + range_cur = bus_cur->rangePFMem; + break; + default: + err("wrong type passed to find out if range already exists\n"); + return -ENODEV; + } + + while (range_cur) { + if ((range_cur->start == range->start) && (range_cur->end == range->end)) + return 1; + range_cur = range_cur->next; + } + + return 0; +} + +/* This routine will read the windows for any PPB we have and update the + * range info for the secondary bus, and will also input this info into + * primary bus, since BIOS doesn't. This is for PPB that are in the system + * on bootup. For bridged cards that were added during previous load of the + * driver, only the ranges and the bus structure are added, the devices are + * added from NVRAM + * Input: primary busno + * Returns: none + * Note: this function doesn't take into account IO restrictions etc, + * so will only work for bridges with no video/ISA devices behind them It + * also will not work for onboard PPBs that can have more than 1 *bus + * behind them All these are TO DO. + * Also need to add more error checkings... (from fnc returns etc) + */ +static int __init update_bridge_ranges(struct bus_node **bus) +{ + u8 sec_busno, device, function, hdr_type, start_io_address, end_io_address; + u16 vendor_id, upper_io_start, upper_io_end, start_mem_address, end_mem_address; + u32 start_address, end_address, upper_start, upper_end; + struct bus_node *bus_sec; + struct bus_node *bus_cur; + struct resource_node *io; + struct resource_node *mem; + struct resource_node *pfmem; + struct range_node *range; + unsigned int devfn; + + bus_cur = *bus; + if (!bus_cur) + return -ENODEV; + ibmphp_pci_bus->number = bus_cur->busno; + + debug("inside %s\n", __func__); + debug("bus_cur->busno = %x\n", bus_cur->busno); + + for (device = 0; device < 32; device++) { + for (function = 0x00; function < 0x08; function++) { + devfn = PCI_DEVFN(device, function); + pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_VENDOR_ID, &vendor_id); + + if (vendor_id != PCI_VENDOR_ID_NOTVALID) { + /* found correct device!!! */ + pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_HEADER_TYPE, &hdr_type); + + switch (hdr_type) { + case PCI_HEADER_TYPE_NORMAL: + function = 0x8; + break; + case PCI_HEADER_TYPE_MULTIDEVICE: + break; + case PCI_HEADER_TYPE_BRIDGE: + function = 0x8; + fallthrough; + case PCI_HEADER_TYPE_MULTIBRIDGE: + /* We assume here that only 1 bus behind the bridge + TO DO: add functionality for several: + temp = secondary; + while (temp < subordinate) { + ... + temp++; + } + */ + pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_busno); + bus_sec = find_bus_wprev(sec_busno, NULL, 0); + /* this bus structure doesn't exist yet, PPB was configured during previous loading of ibmphp */ + if (!bus_sec) { + bus_sec = alloc_error_bus(NULL, sec_busno, 1); + /* the rest will be populated during NVRAM call */ + return 0; + } + pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_IO_BASE, &start_io_address); + pci_bus_read_config_byte(ibmphp_pci_bus, devfn, PCI_IO_LIMIT, &end_io_address); + pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_IO_BASE_UPPER16, &upper_io_start); + pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_IO_LIMIT_UPPER16, &upper_io_end); + start_address = (start_io_address & PCI_IO_RANGE_MASK) << 8; + start_address |= (upper_io_start << 16); + end_address = (end_io_address & PCI_IO_RANGE_MASK) << 8; + end_address |= (upper_io_end << 16); + + if ((start_address) && (start_address <= end_address)) { + range = kzalloc(sizeof(struct range_node), GFP_KERNEL); + if (!range) + return -ENOMEM; + + range->start = start_address; + range->end = end_address + 0xfff; + + if (bus_sec->noIORanges > 0) { + if (!range_exists_already(range, bus_sec, IO)) { + add_bus_range(IO, range, bus_sec); + ++bus_sec->noIORanges; + } else { + kfree(range); + range = NULL; + } + } else { + /* 1st IO Range on the bus */ + range->rangeno = 1; + bus_sec->rangeIO = range; + ++bus_sec->noIORanges; + } + fix_resources(bus_sec); + + if (ibmphp_find_resource(bus_cur, start_address, &io, IO)) { + io = kzalloc(sizeof(struct resource_node), GFP_KERNEL); + if (!io) { + kfree(range); + return -ENOMEM; + } + io->type = IO; + io->busno = bus_cur->busno; + io->devfunc = ((device << 3) | (function & 0x7)); + io->start = start_address; + io->end = end_address + 0xfff; + io->len = io->end - io->start + 1; + ibmphp_add_resource(io); + } + } + + pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, &start_mem_address); + pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, &end_mem_address); + + start_address = 0x00000000 | (start_mem_address & PCI_MEMORY_RANGE_MASK) << 16; + end_address = 0x00000000 | (end_mem_address & PCI_MEMORY_RANGE_MASK) << 16; + + if ((start_address) && (start_address <= end_address)) { + + range = kzalloc(sizeof(struct range_node), GFP_KERNEL); + if (!range) + return -ENOMEM; + + range->start = start_address; + range->end = end_address + 0xfffff; + + if (bus_sec->noMemRanges > 0) { + if (!range_exists_already(range, bus_sec, MEM)) { + add_bus_range(MEM, range, bus_sec); + ++bus_sec->noMemRanges; + } else { + kfree(range); + range = NULL; + } + } else { + /* 1st Mem Range on the bus */ + range->rangeno = 1; + bus_sec->rangeMem = range; + ++bus_sec->noMemRanges; + } + + fix_resources(bus_sec); + + if (ibmphp_find_resource(bus_cur, start_address, &mem, MEM)) { + mem = kzalloc(sizeof(struct resource_node), GFP_KERNEL); + if (!mem) { + kfree(range); + return -ENOMEM; + } + mem->type = MEM; + mem->busno = bus_cur->busno; + mem->devfunc = ((device << 3) | (function & 0x7)); + mem->start = start_address; + mem->end = end_address + 0xfffff; + mem->len = mem->end - mem->start + 1; + ibmphp_add_resource(mem); + } + } + pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, &start_mem_address); + pci_bus_read_config_word(ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &end_mem_address); + pci_bus_read_config_dword(ibmphp_pci_bus, devfn, PCI_PREF_BASE_UPPER32, &upper_start); + pci_bus_read_config_dword(ibmphp_pci_bus, devfn, PCI_PREF_LIMIT_UPPER32, &upper_end); + start_address = 0x00000000 | (start_mem_address & PCI_MEMORY_RANGE_MASK) << 16; + end_address = 0x00000000 | (end_mem_address & PCI_MEMORY_RANGE_MASK) << 16; +#if BITS_PER_LONG == 64 + start_address |= ((long) upper_start) << 32; + end_address |= ((long) upper_end) << 32; +#endif + + if ((start_address) && (start_address <= end_address)) { + + range = kzalloc(sizeof(struct range_node), GFP_KERNEL); + if (!range) + return -ENOMEM; + + range->start = start_address; + range->end = end_address + 0xfffff; + + if (bus_sec->noPFMemRanges > 0) { + if (!range_exists_already(range, bus_sec, PFMEM)) { + add_bus_range(PFMEM, range, bus_sec); + ++bus_sec->noPFMemRanges; + } else { + kfree(range); + range = NULL; + } + } else { + /* 1st PFMem Range on the bus */ + range->rangeno = 1; + bus_sec->rangePFMem = range; + ++bus_sec->noPFMemRanges; + } + + fix_resources(bus_sec); + if (ibmphp_find_resource(bus_cur, start_address, &pfmem, PFMEM)) { + pfmem = kzalloc(sizeof(struct resource_node), GFP_KERNEL); + if (!pfmem) { + kfree(range); + return -ENOMEM; + } + pfmem->type = PFMEM; + pfmem->busno = bus_cur->busno; + pfmem->devfunc = ((device << 3) | (function & 0x7)); + pfmem->start = start_address; + pfmem->end = end_address + 0xfffff; + pfmem->len = pfmem->end - pfmem->start + 1; + pfmem->fromMem = 0; + + ibmphp_add_resource(pfmem); + } + } + break; + } /* end of switch */ + } /* end if vendor */ + } /* end for function */ + } /* end for device */ + + bus = &bus_cur; + return 0; +} |