diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/phy/broadcom/phy-brcm-sata.c | 832 |
1 files changed, 832 insertions, 0 deletions
diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c new file mode 100644 index 000000000..18251f232 --- /dev/null +++ b/drivers/phy/broadcom/phy-brcm-sata.c @@ -0,0 +1,832 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Broadcom SATA3 AHCI Controller PHY Driver + * + * Copyright (C) 2016 Broadcom + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +#define SATA_PCB_BANK_OFFSET 0x23c +#define SATA_PCB_REG_OFFSET(ofs) ((ofs) * 4) + +#define MAX_PORTS 2 + +/* Register offset between PHYs in PCB space */ +#define SATA_PCB_REG_28NM_SPACE_SIZE 0x1000 + +/* The older SATA PHY registers duplicated per port registers within the map, + * rather than having a separate map per port. + */ +#define SATA_PCB_REG_40NM_SPACE_SIZE 0x10 + +/* Register offset between PHYs in PHY control space */ +#define SATA_PHY_CTRL_REG_28NM_SPACE_SIZE 0x8 + +enum brcm_sata_phy_version { + BRCM_SATA_PHY_STB_16NM, + BRCM_SATA_PHY_STB_28NM, + BRCM_SATA_PHY_STB_40NM, + BRCM_SATA_PHY_IPROC_NS2, + BRCM_SATA_PHY_IPROC_NSP, + BRCM_SATA_PHY_IPROC_SR, + BRCM_SATA_PHY_DSL_28NM, +}; + +enum brcm_sata_phy_rxaeq_mode { + RXAEQ_MODE_OFF = 0, + RXAEQ_MODE_AUTO, + RXAEQ_MODE_MANUAL, +}; + +static enum brcm_sata_phy_rxaeq_mode rxaeq_to_val(const char *m) +{ + if (!strcmp(m, "auto")) + return RXAEQ_MODE_AUTO; + else if (!strcmp(m, "manual")) + return RXAEQ_MODE_MANUAL; + else + return RXAEQ_MODE_OFF; +} + +struct brcm_sata_port { + int portnum; + struct phy *phy; + struct brcm_sata_phy *phy_priv; + bool ssc_en; + enum brcm_sata_phy_rxaeq_mode rxaeq_mode; + u32 rxaeq_val; +}; + +struct brcm_sata_phy { + struct device *dev; + void __iomem *phy_base; + void __iomem *ctrl_base; + enum brcm_sata_phy_version version; + + struct brcm_sata_port phys[MAX_PORTS]; +}; + +enum sata_phy_regs { + BLOCK0_REG_BANK = 0x000, + BLOCK0_XGXSSTATUS = 0x81, + BLOCK0_XGXSSTATUS_PLL_LOCK = BIT(12), + BLOCK0_SPARE = 0x8d, + BLOCK0_SPARE_OOB_CLK_SEL_MASK = 0x3, + BLOCK0_SPARE_OOB_CLK_SEL_REFBY2 = 0x1, + + PLL_REG_BANK_0 = 0x050, + PLL_REG_BANK_0_PLLCONTROL_0 = 0x81, + PLLCONTROL_0_FREQ_DET_RESTART = BIT(13), + PLLCONTROL_0_FREQ_MONITOR = BIT(12), + PLLCONTROL_0_SEQ_START = BIT(15), + PLL_CAP_CHARGE_TIME = 0x83, + PLL_VCO_CAL_THRESH = 0x84, + PLL_CAP_CONTROL = 0x85, + PLL_FREQ_DET_TIME = 0x86, + PLL_ACTRL2 = 0x8b, + PLL_ACTRL2_SELDIV_MASK = 0x1f, + PLL_ACTRL2_SELDIV_SHIFT = 9, + PLL_ACTRL6 = 0x86, + + PLL1_REG_BANK = 0x060, + PLL1_ACTRL2 = 0x82, + PLL1_ACTRL3 = 0x83, + PLL1_ACTRL4 = 0x84, + PLL1_ACTRL5 = 0x85, + PLL1_ACTRL6 = 0x86, + PLL1_ACTRL7 = 0x87, + PLL1_ACTRL8 = 0x88, + + TX_REG_BANK = 0x070, + TX_ACTRL0 = 0x80, + TX_ACTRL0_TXPOL_FLIP = BIT(6), + TX_ACTRL5 = 0x85, + TX_ACTRL5_SSC_EN = BIT(11), + + AEQRX_REG_BANK_0 = 0xd0, + AEQ_CONTROL1 = 0x81, + AEQ_CONTROL1_ENABLE = BIT(2), + AEQ_CONTROL1_FREEZE = BIT(3), + AEQ_FRC_EQ = 0x83, + AEQ_FRC_EQ_FORCE = BIT(0), + AEQ_FRC_EQ_FORCE_VAL = BIT(1), + AEQ_RFZ_FRC_VAL = BIT(8), + AEQRX_REG_BANK_1 = 0xe0, + AEQRX_SLCAL0_CTRL0 = 0x82, + AEQRX_SLCAL1_CTRL0 = 0x86, + + OOB_REG_BANK = 0x150, + OOB1_REG_BANK = 0x160, + OOB_CTRL1 = 0x80, + OOB_CTRL1_BURST_MAX_MASK = 0xf, + OOB_CTRL1_BURST_MAX_SHIFT = 12, + OOB_CTRL1_BURST_MIN_MASK = 0xf, + OOB_CTRL1_BURST_MIN_SHIFT = 8, + OOB_CTRL1_WAKE_IDLE_MAX_MASK = 0xf, + OOB_CTRL1_WAKE_IDLE_MAX_SHIFT = 4, + OOB_CTRL1_WAKE_IDLE_MIN_MASK = 0xf, + OOB_CTRL1_WAKE_IDLE_MIN_SHIFT = 0, + OOB_CTRL2 = 0x81, + OOB_CTRL2_SEL_ENA_SHIFT = 15, + OOB_CTRL2_SEL_ENA_RC_SHIFT = 14, + OOB_CTRL2_RESET_IDLE_MAX_MASK = 0x3f, + OOB_CTRL2_RESET_IDLE_MAX_SHIFT = 8, + OOB_CTRL2_BURST_CNT_MASK = 0x3, + OOB_CTRL2_BURST_CNT_SHIFT = 6, + OOB_CTRL2_RESET_IDLE_MIN_MASK = 0x3f, + OOB_CTRL2_RESET_IDLE_MIN_SHIFT = 0, + + TXPMD_REG_BANK = 0x1a0, + TXPMD_CONTROL1 = 0x81, + TXPMD_CONTROL1_TX_SSC_EN_FRC = BIT(0), + TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL = BIT(1), + TXPMD_TX_FREQ_CTRL_CONTROL1 = 0x82, + TXPMD_TX_FREQ_CTRL_CONTROL2 = 0x83, + TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK = 0x3ff, + TXPMD_TX_FREQ_CTRL_CONTROL3 = 0x84, + TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff, + + RXPMD_REG_BANK = 0x1c0, + RXPMD_RX_CDR_CONTROL1 = 0x81, + RXPMD_RX_PPM_VAL_MASK = 0x1ff, + RXPMD_RXPMD_EN_FRC = BIT(12), + RXPMD_RXPMD_EN_FRC_VAL = BIT(13), + RXPMD_RX_CDR_CDR_PROP_BW = 0x82, + RXPMD_G_CDR_PROP_BW_MASK = 0x7, + RXPMD_G1_CDR_PROP_BW_SHIFT = 0, + RXPMD_G2_CDR_PROP_BW_SHIFT = 3, + RXPMD_G3_CDR_PROB_BW_SHIFT = 6, + RXPMD_RX_CDR_CDR_ACQ_INTEG_BW = 0x83, + RXPMD_G_CDR_ACQ_INT_BW_MASK = 0x7, + RXPMD_G1_CDR_ACQ_INT_BW_SHIFT = 0, + RXPMD_G2_CDR_ACQ_INT_BW_SHIFT = 3, + RXPMD_G3_CDR_ACQ_INT_BW_SHIFT = 6, + RXPMD_RX_CDR_CDR_LOCK_INTEG_BW = 0x84, + RXPMD_G_CDR_LOCK_INT_BW_MASK = 0x7, + RXPMD_G1_CDR_LOCK_INT_BW_SHIFT = 0, + RXPMD_G2_CDR_LOCK_INT_BW_SHIFT = 3, + RXPMD_G3_CDR_LOCK_INT_BW_SHIFT = 6, + RXPMD_RX_FREQ_MON_CONTROL1 = 0x87, + RXPMD_MON_CORRECT_EN = BIT(8), + RXPMD_MON_MARGIN_VAL_MASK = 0xff, +}; + +enum sata_phy_ctrl_regs { + PHY_CTRL_1 = 0x0, + PHY_CTRL_1_RESET = BIT(0), +}; + +static inline void __iomem *brcm_sata_ctrl_base(struct brcm_sata_port *port) +{ + struct brcm_sata_phy *priv = port->phy_priv; + u32 size = 0; + + switch (priv->version) { + case BRCM_SATA_PHY_IPROC_NS2: + size = SATA_PHY_CTRL_REG_28NM_SPACE_SIZE; + break; + default: + dev_err(priv->dev, "invalid phy version\n"); + break; + } + + return priv->ctrl_base + (port->portnum * size); +} + +static void brcm_sata_phy_wr(struct brcm_sata_port *port, u32 bank, + u32 ofs, u32 msk, u32 value) +{ + struct brcm_sata_phy *priv = port->phy_priv; + void __iomem *pcb_base = priv->phy_base; + u32 tmp; + + if (priv->version == BRCM_SATA_PHY_STB_40NM) + bank += (port->portnum * SATA_PCB_REG_40NM_SPACE_SIZE); + else + pcb_base += (port->portnum * SATA_PCB_REG_28NM_SPACE_SIZE); + + writel(bank, pcb_base + SATA_PCB_BANK_OFFSET); + tmp = readl(pcb_base + SATA_PCB_REG_OFFSET(ofs)); + tmp = (tmp & msk) | value; + writel(tmp, pcb_base + SATA_PCB_REG_OFFSET(ofs)); +} + +static u32 brcm_sata_phy_rd(struct brcm_sata_port *port, u32 bank, u32 ofs) +{ + struct brcm_sata_phy *priv = port->phy_priv; + void __iomem *pcb_base = priv->phy_base; + + if (priv->version == BRCM_SATA_PHY_STB_40NM) + bank += (port->portnum * SATA_PCB_REG_40NM_SPACE_SIZE); + else + pcb_base += (port->portnum * SATA_PCB_REG_28NM_SPACE_SIZE); + + writel(bank, pcb_base + SATA_PCB_BANK_OFFSET); + return readl(pcb_base + SATA_PCB_REG_OFFSET(ofs)); +} + +/* These defaults were characterized by H/W group */ +#define STB_FMIN_VAL_DEFAULT 0x3df +#define STB_FMAX_VAL_DEFAULT 0x3df +#define STB_FMAX_VAL_SSC 0x83 + +static void brcm_stb_sata_ssc_init(struct brcm_sata_port *port) +{ + struct brcm_sata_phy *priv = port->phy_priv; + u32 tmp; + + /* override the TX spread spectrum setting */ + tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC; + brcm_sata_phy_wr(port, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp); + + /* set fixed min freq */ + brcm_sata_phy_wr(port, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2, + ~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK, + STB_FMIN_VAL_DEFAULT); + + /* set fixed max freq depending on SSC config */ + if (port->ssc_en) { + dev_info(priv->dev, "enabling SSC on port%d\n", port->portnum); + tmp = STB_FMAX_VAL_SSC; + } else { + tmp = STB_FMAX_VAL_DEFAULT; + } + + brcm_sata_phy_wr(port, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3, + ~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp); +} + +#define AEQ_FRC_EQ_VAL_SHIFT 2 +#define AEQ_FRC_EQ_VAL_MASK 0x3f + +static int brcm_stb_sata_rxaeq_init(struct brcm_sata_port *port) +{ + u32 tmp = 0, reg = 0; + + switch (port->rxaeq_mode) { + case RXAEQ_MODE_OFF: + return 0; + + case RXAEQ_MODE_AUTO: + reg = AEQ_CONTROL1; + tmp = AEQ_CONTROL1_ENABLE | AEQ_CONTROL1_FREEZE; + break; + + case RXAEQ_MODE_MANUAL: + reg = AEQ_FRC_EQ; + tmp = AEQ_FRC_EQ_FORCE | AEQ_FRC_EQ_FORCE_VAL; + if (port->rxaeq_val > AEQ_FRC_EQ_VAL_MASK) + return -EINVAL; + tmp |= port->rxaeq_val << AEQ_FRC_EQ_VAL_SHIFT; + break; + } + + brcm_sata_phy_wr(port, AEQRX_REG_BANK_0, reg, ~tmp, tmp); + brcm_sata_phy_wr(port, AEQRX_REG_BANK_1, reg, ~tmp, tmp); + + return 0; +} + +static int brcm_stb_sata_init(struct brcm_sata_port *port) +{ + brcm_stb_sata_ssc_init(port); + + return brcm_stb_sata_rxaeq_init(port); +} + +static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port) +{ + u32 tmp, value; + + /* Reduce CP tail current to 1/16th of its default value */ + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0x141); + + /* Turn off CP tail current boost */ + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL8, 0, 0xc006); + + /* Set a specific AEQ equalizer value */ + tmp = AEQ_FRC_EQ_FORCE_VAL | AEQ_FRC_EQ_FORCE; + brcm_sata_phy_wr(port, AEQRX_REG_BANK_0, AEQ_FRC_EQ, + ~(tmp | AEQ_RFZ_FRC_VAL | + AEQ_FRC_EQ_VAL_MASK << AEQ_FRC_EQ_VAL_SHIFT), + tmp | 32 << AEQ_FRC_EQ_VAL_SHIFT); + + /* Set RX PPM val center frequency */ + if (port->ssc_en) + value = 0x52; + else + value = 0; + brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CONTROL1, + ~RXPMD_RX_PPM_VAL_MASK, value); + + /* Set proportional loop bandwith Gen1/2/3 */ + tmp = RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G1_CDR_PROP_BW_SHIFT | + RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G2_CDR_PROP_BW_SHIFT | + RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G3_CDR_PROB_BW_SHIFT; + if (port->ssc_en) + value = 2 << RXPMD_G1_CDR_PROP_BW_SHIFT | + 2 << RXPMD_G2_CDR_PROP_BW_SHIFT | + 2 << RXPMD_G3_CDR_PROB_BW_SHIFT; + else + value = 1 << RXPMD_G1_CDR_PROP_BW_SHIFT | + 1 << RXPMD_G2_CDR_PROP_BW_SHIFT | + 1 << RXPMD_G3_CDR_PROB_BW_SHIFT; + brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_PROP_BW, ~tmp, + value); + + /* Set CDR integral loop acquisition bandwidth for Gen1/2/3 */ + tmp = RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G1_CDR_ACQ_INT_BW_SHIFT | + RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G2_CDR_ACQ_INT_BW_SHIFT | + RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G3_CDR_ACQ_INT_BW_SHIFT; + if (port->ssc_en) + value = 1 << RXPMD_G1_CDR_ACQ_INT_BW_SHIFT | + 1 << RXPMD_G2_CDR_ACQ_INT_BW_SHIFT | + 1 << RXPMD_G3_CDR_ACQ_INT_BW_SHIFT; + else + value = 0; + brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_ACQ_INTEG_BW, + ~tmp, value); + + /* Set CDR integral loop locking bandwidth to 1 for Gen 1/2/3 */ + tmp = RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G1_CDR_LOCK_INT_BW_SHIFT | + RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G2_CDR_LOCK_INT_BW_SHIFT | + RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G3_CDR_LOCK_INT_BW_SHIFT; + if (port->ssc_en) + value = 1 << RXPMD_G1_CDR_LOCK_INT_BW_SHIFT | + 1 << RXPMD_G2_CDR_LOCK_INT_BW_SHIFT | + 1 << RXPMD_G3_CDR_LOCK_INT_BW_SHIFT; + else + value = 0; + brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_LOCK_INTEG_BW, + ~tmp, value); + + /* Set no guard band and clamp CDR */ + tmp = RXPMD_MON_CORRECT_EN | RXPMD_MON_MARGIN_VAL_MASK; + if (port->ssc_en) + value = 0x51; + else + value = 0; + brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1, + ~tmp, RXPMD_MON_CORRECT_EN | value); + + /* Turn on/off SSC */ + brcm_sata_phy_wr(port, TX_REG_BANK, TX_ACTRL5, ~TX_ACTRL5_SSC_EN, + port->ssc_en ? TX_ACTRL5_SSC_EN : 0); + + return 0; +} + +static int brcm_stb_sata_16nm_init(struct brcm_sata_port *port) +{ + return brcm_stb_sata_16nm_ssc_init(port); +} + +/* NS2 SATA PLL1 defaults were characterized by H/W group */ +#define NS2_PLL1_ACTRL2_MAGIC 0x1df8 +#define NS2_PLL1_ACTRL3_MAGIC 0x2b00 +#define NS2_PLL1_ACTRL4_MAGIC 0x8824 + +static int brcm_ns2_sata_init(struct brcm_sata_port *port) +{ + int try; + unsigned int val; + void __iomem *ctrl_base = brcm_sata_ctrl_base(port); + struct device *dev = port->phy_priv->dev; + + /* Configure OOB control */ + val = 0x0; + val |= (0xc << OOB_CTRL1_BURST_MAX_SHIFT); + val |= (0x4 << OOB_CTRL1_BURST_MIN_SHIFT); + val |= (0x9 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT); + val |= (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT); + brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL1, 0x0, val); + val = 0x0; + val |= (0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT); + val |= (0x2 << OOB_CTRL2_BURST_CNT_SHIFT); + val |= (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT); + brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL2, 0x0, val); + + /* Configure PHY PLL register bank 1 */ + val = NS2_PLL1_ACTRL2_MAGIC; + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val); + val = NS2_PLL1_ACTRL3_MAGIC; + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val); + val = NS2_PLL1_ACTRL4_MAGIC; + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val); + + /* Configure PHY BLOCK0 register bank */ + /* Set oob_clk_sel to refclk/2 */ + brcm_sata_phy_wr(port, BLOCK0_REG_BANK, BLOCK0_SPARE, + ~BLOCK0_SPARE_OOB_CLK_SEL_MASK, + BLOCK0_SPARE_OOB_CLK_SEL_REFBY2); + + /* Strobe PHY reset using PHY control register */ + writel(PHY_CTRL_1_RESET, ctrl_base + PHY_CTRL_1); + mdelay(1); + writel(0x0, ctrl_base + PHY_CTRL_1); + mdelay(1); + + /* Wait for PHY PLL lock by polling pll_lock bit */ + try = 50; + while (try) { + val = brcm_sata_phy_rd(port, BLOCK0_REG_BANK, + BLOCK0_XGXSSTATUS); + if (val & BLOCK0_XGXSSTATUS_PLL_LOCK) + break; + msleep(20); + try--; + } + if (!try) { + /* PLL did not lock; give up */ + dev_err(dev, "port%d PLL did not lock\n", port->portnum); + return -ETIMEDOUT; + } + + dev_dbg(dev, "port%d initialized\n", port->portnum); + + return 0; +} + +static int brcm_nsp_sata_init(struct brcm_sata_port *port) +{ + struct device *dev = port->phy_priv->dev; + unsigned int oob_bank; + unsigned int val, try; + + /* Configure OOB control */ + if (port->portnum == 0) + oob_bank = OOB_REG_BANK; + else if (port->portnum == 1) + oob_bank = OOB1_REG_BANK; + else + return -EINVAL; + + val = 0x0; + val |= (0x0f << OOB_CTRL1_BURST_MAX_SHIFT); + val |= (0x06 << OOB_CTRL1_BURST_MIN_SHIFT); + val |= (0x0f << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT); + val |= (0x06 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT); + brcm_sata_phy_wr(port, oob_bank, OOB_CTRL1, 0x0, val); + + val = 0x0; + val |= (0x2e << OOB_CTRL2_RESET_IDLE_MAX_SHIFT); + val |= (0x02 << OOB_CTRL2_BURST_CNT_SHIFT); + val |= (0x16 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT); + brcm_sata_phy_wr(port, oob_bank, OOB_CTRL2, 0x0, val); + + + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_ACTRL2, + ~(PLL_ACTRL2_SELDIV_MASK << PLL_ACTRL2_SELDIV_SHIFT), + 0x0c << PLL_ACTRL2_SELDIV_SHIFT); + + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_CAP_CONTROL, + 0xff0, 0x4f0); + + val = PLLCONTROL_0_FREQ_DET_RESTART | PLLCONTROL_0_FREQ_MONITOR; + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, + ~val, val); + val = PLLCONTROL_0_SEQ_START; + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, + ~val, 0); + mdelay(10); + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, + ~val, val); + + /* Wait for pll_seq_done bit */ + try = 50; + while (--try) { + val = brcm_sata_phy_rd(port, BLOCK0_REG_BANK, + BLOCK0_XGXSSTATUS); + if (val & BLOCK0_XGXSSTATUS_PLL_LOCK) + break; + msleep(20); + } + if (!try) { + /* PLL did not lock; give up */ + dev_err(dev, "port%d PLL did not lock\n", port->portnum); + return -ETIMEDOUT; + } + + dev_dbg(dev, "port%d initialized\n", port->portnum); + + return 0; +} + +/* SR PHY PLL0 registers */ +#define SR_PLL0_ACTRL6_MAGIC 0xa + +/* SR PHY PLL1 registers */ +#define SR_PLL1_ACTRL2_MAGIC 0x32 +#define SR_PLL1_ACTRL3_MAGIC 0x2 +#define SR_PLL1_ACTRL4_MAGIC 0x3e8 + +static int brcm_sr_sata_init(struct brcm_sata_port *port) +{ + struct device *dev = port->phy_priv->dev; + unsigned int val, try; + + /* Configure PHY PLL register bank 1 */ + val = SR_PLL1_ACTRL2_MAGIC; + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val); + val = SR_PLL1_ACTRL3_MAGIC; + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val); + val = SR_PLL1_ACTRL4_MAGIC; + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val); + + /* Configure PHY PLL register bank 0 */ + val = SR_PLL0_ACTRL6_MAGIC; + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_ACTRL6, 0x0, val); + + /* Wait for PHY PLL lock by polling pll_lock bit */ + try = 50; + do { + val = brcm_sata_phy_rd(port, BLOCK0_REG_BANK, + BLOCK0_XGXSSTATUS); + if (val & BLOCK0_XGXSSTATUS_PLL_LOCK) + break; + msleep(20); + try--; + } while (try); + + if ((val & BLOCK0_XGXSSTATUS_PLL_LOCK) == 0) { + /* PLL did not lock; give up */ + dev_err(dev, "port%d PLL did not lock\n", port->portnum); + return -ETIMEDOUT; + } + + /* Invert Tx polarity */ + brcm_sata_phy_wr(port, TX_REG_BANK, TX_ACTRL0, + ~TX_ACTRL0_TXPOL_FLIP, TX_ACTRL0_TXPOL_FLIP); + + /* Configure OOB control to handle 100MHz reference clock */ + val = ((0xc << OOB_CTRL1_BURST_MAX_SHIFT) | + (0x4 << OOB_CTRL1_BURST_MIN_SHIFT) | + (0x8 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT) | + (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT)); + brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL1, 0x0, val); + val = ((0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT) | + (0x2 << OOB_CTRL2_BURST_CNT_SHIFT) | + (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT)); + brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL2, 0x0, val); + + return 0; +} + +static int brcm_dsl_sata_init(struct brcm_sata_port *port) +{ + struct device *dev = port->phy_priv->dev; + unsigned int try; + u32 tmp; + + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL7, 0, 0x873); + + brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0xc000); + + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, + 0, 0x3089); + usleep_range(1000, 2000); + + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0, + 0, 0x3088); + usleep_range(1000, 2000); + + brcm_sata_phy_wr(port, AEQRX_REG_BANK_1, AEQRX_SLCAL0_CTRL0, + 0, 0x3000); + + brcm_sata_phy_wr(port, AEQRX_REG_BANK_1, AEQRX_SLCAL1_CTRL0, + 0, 0x3000); + usleep_range(1000, 2000); + + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_CAP_CHARGE_TIME, 0, 0x32); + + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_VCO_CAL_THRESH, 0, 0xa); + + brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_FREQ_DET_TIME, 0, 0x64); + usleep_range(1000, 2000); + + /* Acquire PLL lock */ + try = 50; + while (try) { + tmp = brcm_sata_phy_rd(port, BLOCK0_REG_BANK, + BLOCK0_XGXSSTATUS); + if (tmp & BLOCK0_XGXSSTATUS_PLL_LOCK) + break; + msleep(20); + try--; + }; + + if (!try) { + /* PLL did not lock; give up */ + dev_err(dev, "port%d PLL did not lock\n", port->portnum); + return -ETIMEDOUT; + } + + dev_dbg(dev, "port%d initialized\n", port->portnum); + + return 0; +} + +static int brcm_sata_phy_init(struct phy *phy) +{ + int rc; + struct brcm_sata_port *port = phy_get_drvdata(phy); + + switch (port->phy_priv->version) { + case BRCM_SATA_PHY_STB_16NM: + rc = brcm_stb_sata_16nm_init(port); + break; + case BRCM_SATA_PHY_STB_28NM: + case BRCM_SATA_PHY_STB_40NM: + rc = brcm_stb_sata_init(port); + break; + case BRCM_SATA_PHY_IPROC_NS2: + rc = brcm_ns2_sata_init(port); + break; + case BRCM_SATA_PHY_IPROC_NSP: + rc = brcm_nsp_sata_init(port); + break; + case BRCM_SATA_PHY_IPROC_SR: + rc = brcm_sr_sata_init(port); + break; + case BRCM_SATA_PHY_DSL_28NM: + rc = brcm_dsl_sata_init(port); + break; + default: + rc = -ENODEV; + } + + return rc; +} + +static void brcm_stb_sata_calibrate(struct brcm_sata_port *port) +{ + u32 tmp = BIT(8); + + brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1, + ~tmp, tmp); +} + +static int brcm_sata_phy_calibrate(struct phy *phy) +{ + struct brcm_sata_port *port = phy_get_drvdata(phy); + int rc = -EOPNOTSUPP; + + switch (port->phy_priv->version) { + case BRCM_SATA_PHY_STB_28NM: + case BRCM_SATA_PHY_STB_40NM: + brcm_stb_sata_calibrate(port); + rc = 0; + break; + default: + break; + } + + return rc; +} + +static const struct phy_ops phy_ops = { + .init = brcm_sata_phy_init, + .calibrate = brcm_sata_phy_calibrate, + .owner = THIS_MODULE, +}; + +static const struct of_device_id brcm_sata_phy_of_match[] = { + { .compatible = "brcm,bcm7216-sata-phy", + .data = (void *)BRCM_SATA_PHY_STB_16NM }, + { .compatible = "brcm,bcm7445-sata-phy", + .data = (void *)BRCM_SATA_PHY_STB_28NM }, + { .compatible = "brcm,bcm7425-sata-phy", + .data = (void *)BRCM_SATA_PHY_STB_40NM }, + { .compatible = "brcm,iproc-ns2-sata-phy", + .data = (void *)BRCM_SATA_PHY_IPROC_NS2 }, + { .compatible = "brcm,iproc-nsp-sata-phy", + .data = (void *)BRCM_SATA_PHY_IPROC_NSP }, + { .compatible = "brcm,iproc-sr-sata-phy", + .data = (void *)BRCM_SATA_PHY_IPROC_SR }, + { .compatible = "brcm,bcm63138-sata-phy", + .data = (void *)BRCM_SATA_PHY_DSL_28NM }, + {}, +}; +MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match); + +static int brcm_sata_phy_probe(struct platform_device *pdev) +{ + const char *rxaeq_mode; + struct device *dev = &pdev->dev; + struct device_node *dn = dev->of_node, *child; + const struct of_device_id *of_id; + struct brcm_sata_phy *priv; + struct resource *res; + struct phy_provider *provider; + int ret, count = 0; + + if (of_get_child_count(dn) == 0) + return -ENODEV; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + dev_set_drvdata(dev, priv); + priv->dev = dev; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy"); + priv->phy_base = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->phy_base)) + return PTR_ERR(priv->phy_base); + + of_id = of_match_node(brcm_sata_phy_of_match, dn); + if (of_id) + priv->version = (enum brcm_sata_phy_version)of_id->data; + else + priv->version = BRCM_SATA_PHY_STB_28NM; + + if (priv->version == BRCM_SATA_PHY_IPROC_NS2) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "phy-ctrl"); + priv->ctrl_base = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->ctrl_base)) + return PTR_ERR(priv->ctrl_base); + } + + for_each_available_child_of_node(dn, child) { + unsigned int id; + struct brcm_sata_port *port; + + if (of_property_read_u32(child, "reg", &id)) { + dev_err(dev, "missing reg property in node %pOFn\n", + child); + ret = -EINVAL; + goto put_child; + } + + if (id >= MAX_PORTS) { + dev_err(dev, "invalid reg: %u\n", id); + ret = -EINVAL; + goto put_child; + } + if (priv->phys[id].phy) { + dev_err(dev, "already registered port %u\n", id); + ret = -EINVAL; + goto put_child; + } + + port = &priv->phys[id]; + port->portnum = id; + port->phy_priv = priv; + port->phy = devm_phy_create(dev, child, &phy_ops); + port->rxaeq_mode = RXAEQ_MODE_OFF; + if (!of_property_read_string(child, "brcm,rxaeq-mode", + &rxaeq_mode)) + port->rxaeq_mode = rxaeq_to_val(rxaeq_mode); + if (port->rxaeq_mode == RXAEQ_MODE_MANUAL) + of_property_read_u32(child, "brcm,rxaeq-value", + &port->rxaeq_val); + port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc"); + if (IS_ERR(port->phy)) { + dev_err(dev, "failed to create PHY\n"); + ret = PTR_ERR(port->phy); + goto put_child; + } + + phy_set_drvdata(port->phy, port); + count++; + } + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(provider)) { + dev_err(dev, "could not register PHY provider\n"); + return PTR_ERR(provider); + } + + dev_info(dev, "registered %d port(s)\n", count); + + return 0; +put_child: + of_node_put(child); + return ret; +} + +static struct platform_driver brcm_sata_phy_driver = { + .probe = brcm_sata_phy_probe, + .driver = { + .of_match_table = brcm_sata_phy_of_match, + .name = "brcm-sata-phy", + } +}; +module_platform_driver(brcm_sata_phy_driver); + +MODULE_DESCRIPTION("Broadcom SATA PHY driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Marc Carino"); +MODULE_AUTHOR("Brian Norris"); +MODULE_ALIAS("platform:phy-brcm-sata"); |