diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/phy/marvell/phy-pxa-usb.c | 345 |
1 files changed, 345 insertions, 0 deletions
diff --git a/drivers/phy/marvell/phy-pxa-usb.c b/drivers/phy/marvell/phy-pxa-usb.c new file mode 100644 index 000000000..87ff7550b --- /dev/null +++ b/drivers/phy/marvell/phy-pxa-usb.c @@ -0,0 +1,345 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * Copyright (C) 2018 Lubomir Rintel <lkundrak@v3.sk> + */ + +#include <dt-bindings/phy/phy.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +/* phy regs */ +#define UTMI_REVISION 0x0 +#define UTMI_CTRL 0x4 +#define UTMI_PLL 0x8 +#define UTMI_TX 0xc +#define UTMI_RX 0x10 +#define UTMI_IVREF 0x14 +#define UTMI_T0 0x18 +#define UTMI_T1 0x1c +#define UTMI_T2 0x20 +#define UTMI_T3 0x24 +#define UTMI_T4 0x28 +#define UTMI_T5 0x2c +#define UTMI_RESERVE 0x30 +#define UTMI_USB_INT 0x34 +#define UTMI_DBG_CTL 0x38 +#define UTMI_OTG_ADDON 0x3c + +/* For UTMICTRL Register */ +#define UTMI_CTRL_USB_CLK_EN (1 << 31) +/* pxa168 */ +#define UTMI_CTRL_SUSPEND_SET1 (1 << 30) +#define UTMI_CTRL_SUSPEND_SET2 (1 << 29) +#define UTMI_CTRL_RXBUF_PDWN (1 << 24) +#define UTMI_CTRL_TXBUF_PDWN (1 << 11) + +#define UTMI_CTRL_INPKT_DELAY_SHIFT 30 +#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT 28 +#define UTMI_CTRL_PU_REF_SHIFT 20 +#define UTMI_CTRL_ARC_PULLDN_SHIFT 12 +#define UTMI_CTRL_PLL_PWR_UP_SHIFT 1 +#define UTMI_CTRL_PWR_UP_SHIFT 0 + +/* For UTMI_PLL Register */ +#define UTMI_PLL_PLLCALI12_SHIFT 29 +#define UTMI_PLL_PLLCALI12_MASK (0x3 << 29) + +#define UTMI_PLL_PLLVDD18_SHIFT 27 +#define UTMI_PLL_PLLVDD18_MASK (0x3 << 27) + +#define UTMI_PLL_PLLVDD12_SHIFT 25 +#define UTMI_PLL_PLLVDD12_MASK (0x3 << 25) + +#define UTMI_PLL_CLK_BLK_EN_SHIFT 24 +#define CLK_BLK_EN (0x1 << 24) +#define PLL_READY (0x1 << 23) +#define KVCO_EXT (0x1 << 22) +#define VCOCAL_START (0x1 << 21) + +#define UTMI_PLL_KVCO_SHIFT 15 +#define UTMI_PLL_KVCO_MASK (0x7 << 15) + +#define UTMI_PLL_ICP_SHIFT 12 +#define UTMI_PLL_ICP_MASK (0x7 << 12) + +#define UTMI_PLL_FBDIV_SHIFT 4 +#define UTMI_PLL_FBDIV_MASK (0xFF << 4) + +#define UTMI_PLL_REFDIV_SHIFT 0 +#define UTMI_PLL_REFDIV_MASK (0xF << 0) + +/* For UTMI_TX Register */ +#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT 27 +#define UTMI_TX_REG_EXT_FS_RCAL_MASK (0xf << 27) + +#define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT 26 +#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK (0x1 << 26) + +#define UTMI_TX_TXVDD12_SHIFT 22 +#define UTMI_TX_TXVDD12_MASK (0x3 << 22) + +#define UTMI_TX_CK60_PHSEL_SHIFT 17 +#define UTMI_TX_CK60_PHSEL_MASK (0xf << 17) + +#define UTMI_TX_IMPCAL_VTH_SHIFT 14 +#define UTMI_TX_IMPCAL_VTH_MASK (0x7 << 14) + +#define REG_RCAL_START (0x1 << 12) + +#define UTMI_TX_LOW_VDD_EN_SHIFT 11 + +#define UTMI_TX_AMP_SHIFT 0 +#define UTMI_TX_AMP_MASK (0x7 << 0) + +/* For UTMI_RX Register */ +#define UTMI_REG_SQ_LENGTH_SHIFT 15 +#define UTMI_REG_SQ_LENGTH_MASK (0x3 << 15) + +#define UTMI_RX_SQ_THRESH_SHIFT 4 +#define UTMI_RX_SQ_THRESH_MASK (0xf << 4) + +#define UTMI_OTG_ADDON_OTG_ON (1 << 0) + +enum pxa_usb_phy_version { + PXA_USB_PHY_MMP2, + PXA_USB_PHY_PXA910, + PXA_USB_PHY_PXA168, +}; + +struct pxa_usb_phy { + struct phy *phy; + void __iomem *base; + enum pxa_usb_phy_version version; +}; + +/***************************************************************************** + * The registers read/write routines + *****************************************************************************/ + +static unsigned int u2o_get(void __iomem *base, unsigned int offset) +{ + return readl_relaxed(base + offset); +} + +static void u2o_set(void __iomem *base, unsigned int offset, + unsigned int value) +{ + u32 reg; + + reg = readl_relaxed(base + offset); + reg |= value; + writel_relaxed(reg, base + offset); + readl_relaxed(base + offset); +} + +static void u2o_clear(void __iomem *base, unsigned int offset, + unsigned int value) +{ + u32 reg; + + reg = readl_relaxed(base + offset); + reg &= ~value; + writel_relaxed(reg, base + offset); + readl_relaxed(base + offset); +} + +static void u2o_write(void __iomem *base, unsigned int offset, + unsigned int value) +{ + writel_relaxed(value, base + offset); + readl_relaxed(base + offset); +} + +static int pxa_usb_phy_init(struct phy *phy) +{ + struct pxa_usb_phy *pxa_usb_phy = phy_get_drvdata(phy); + void __iomem *base = pxa_usb_phy->base; + int loops; + + dev_info(&phy->dev, "initializing Marvell PXA USB PHY"); + + /* Initialize the USB PHY power */ + if (pxa_usb_phy->version == PXA_USB_PHY_PXA910) { + u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT) + | (1<<UTMI_CTRL_PU_REF_SHIFT)); + } + + u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT); + u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT); + + /* UTMI_PLL settings */ + u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK + | UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK + | UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK + | UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK); + + u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT + | 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT + | 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT + | 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT); + + /* UTMI_TX */ + u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK + | UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK + | UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK + | UTMI_TX_AMP_MASK); + u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT + | 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT + | 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT); + + /* UTMI_RX */ + u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK + | UTMI_REG_SQ_LENGTH_MASK); + u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT + | 2<<UTMI_REG_SQ_LENGTH_SHIFT); + + /* UTMI_IVREF */ + if (pxa_usb_phy->version == PXA_USB_PHY_PXA168) { + /* + * fixing Microsoft Altair board interface with NEC hub issue - + * Set UTMI_IVREF from 0x4a3 to 0x4bf + */ + u2o_write(base, UTMI_IVREF, 0x4bf); + } + + /* toggle VCOCAL_START bit of UTMI_PLL */ + udelay(200); + u2o_set(base, UTMI_PLL, VCOCAL_START); + udelay(40); + u2o_clear(base, UTMI_PLL, VCOCAL_START); + + /* toggle REG_RCAL_START bit of UTMI_TX */ + udelay(400); + u2o_set(base, UTMI_TX, REG_RCAL_START); + udelay(40); + u2o_clear(base, UTMI_TX, REG_RCAL_START); + udelay(400); + + /* Make sure PHY PLL is ready */ + loops = 0; + while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) { + mdelay(1); + loops++; + if (loops > 100) { + dev_warn(&phy->dev, "calibrate timeout, UTMI_PLL %x\n", + u2o_get(base, UTMI_PLL)); + break; + } + } + + if (pxa_usb_phy->version == PXA_USB_PHY_PXA168) { + u2o_set(base, UTMI_RESERVE, 1 << 5); + /* Turn on UTMI PHY OTG extension */ + u2o_write(base, UTMI_OTG_ADDON, 1); + } + + return 0; + +} + +static int pxa_usb_phy_exit(struct phy *phy) +{ + struct pxa_usb_phy *pxa_usb_phy = phy_get_drvdata(phy); + void __iomem *base = pxa_usb_phy->base; + + dev_info(&phy->dev, "deinitializing Marvell PXA USB PHY"); + + if (pxa_usb_phy->version == PXA_USB_PHY_PXA168) + u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON); + + u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN); + u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN); + u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN); + u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT); + u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT); + + return 0; +} + +static const struct phy_ops pxa_usb_phy_ops = { + .init = pxa_usb_phy_init, + .exit = pxa_usb_phy_exit, + .owner = THIS_MODULE, +}; + +static const struct of_device_id pxa_usb_phy_of_match[] = { + { + .compatible = "marvell,mmp2-usb-phy", + .data = (void *)PXA_USB_PHY_MMP2, + }, { + .compatible = "marvell,pxa910-usb-phy", + .data = (void *)PXA_USB_PHY_PXA910, + }, { + .compatible = "marvell,pxa168-usb-phy", + .data = (void *)PXA_USB_PHY_PXA168, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, pxa_usb_phy_of_match); + +static int pxa_usb_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *resource; + struct pxa_usb_phy *pxa_usb_phy; + struct phy_provider *provider; + const struct of_device_id *of_id; + + pxa_usb_phy = devm_kzalloc(dev, sizeof(struct pxa_usb_phy), GFP_KERNEL); + if (!pxa_usb_phy) + return -ENOMEM; + + of_id = of_match_node(pxa_usb_phy_of_match, dev->of_node); + if (of_id) + pxa_usb_phy->version = (enum pxa_usb_phy_version)of_id->data; + else + pxa_usb_phy->version = PXA_USB_PHY_MMP2; + + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pxa_usb_phy->base = devm_ioremap_resource(dev, resource); + if (IS_ERR(pxa_usb_phy->base)) { + dev_err(dev, "failed to remap PHY regs\n"); + return PTR_ERR(pxa_usb_phy->base); + } + + pxa_usb_phy->phy = devm_phy_create(dev, NULL, &pxa_usb_phy_ops); + if (IS_ERR(pxa_usb_phy->phy)) { + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(pxa_usb_phy->phy); + } + + phy_set_drvdata(pxa_usb_phy->phy, pxa_usb_phy); + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(provider)) { + dev_err(dev, "failed to register PHY provider\n"); + return PTR_ERR(provider); + } + + if (!dev->of_node) { + phy_create_lookup(pxa_usb_phy->phy, "usb", "mv-udc"); + phy_create_lookup(pxa_usb_phy->phy, "usb", "pxa-u2oehci"); + phy_create_lookup(pxa_usb_phy->phy, "usb", "mv-otg"); + } + + dev_info(dev, "Marvell PXA USB PHY"); + return 0; +} + +static struct platform_driver pxa_usb_phy_driver = { + .probe = pxa_usb_phy_probe, + .driver = { + .name = "pxa-usb-phy", + .of_match_table = pxa_usb_phy_of_match, + }, +}; +module_platform_driver(pxa_usb_phy_driver); + +MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>"); +MODULE_DESCRIPTION("Marvell PXA USB PHY Driver"); +MODULE_LICENSE("GPL v2"); |