diff options
Diffstat (limited to 'drivers/phy/renesas/phy-rcar-gen3-usb3.c')
| -rw-r--r-- | drivers/phy/renesas/phy-rcar-gen3-usb3.c | 223 |
1 files changed, 223 insertions, 0 deletions
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb3.c b/drivers/phy/renesas/phy-rcar-gen3-usb3.c new file mode 100644 index 000000000..566b4cf4f --- /dev/null +++ b/drivers/phy/renesas/phy-rcar-gen3-usb3.c @@ -0,0 +1,223 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Renesas R-Car Gen3 for USB3.0 PHY driver + * + * Copyright (C) 2017 Renesas Electronics Corporation + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> + +#define USB30_CLKSET0 0x034 +#define USB30_CLKSET1 0x036 +#define USB30_SSC_SET 0x038 +#define USB30_PHY_ENABLE 0x060 +#define USB30_VBUS_EN 0x064 + +/* USB30_CLKSET0 */ +#define CLKSET0_PRIVATE 0x05c0 +#define CLKSET0_USB30_FSEL_USB_EXTAL 0x0002 + +/* USB30_CLKSET1 */ +#define CLKSET1_USB30_PLL_MULTI_SHIFT 6 +#define CLKSET1_USB30_PLL_MULTI_USB_EXTAL (0x64 << \ + CLKSET1_USB30_PLL_MULTI_SHIFT) +#define CLKSET1_PHYRESET BIT(4) /* 1: reset */ +#define CLKSET1_REF_CLKDIV BIT(3) /* 1: USB_EXTAL */ +#define CLKSET1_PRIVATE_2_1 BIT(1) /* Write B'01 */ +#define CLKSET1_REF_CLK_SEL BIT(0) /* 1: USB3S0_CLK_P */ + +/* USB30_SSC_SET */ +#define SSC_SET_SSC_EN BIT(12) +#define SSC_SET_RANGE_SHIFT 9 +#define SSC_SET_RANGE_4980 (0x0 << SSC_SET_RANGE_SHIFT) +#define SSC_SET_RANGE_4492 (0x1 << SSC_SET_RANGE_SHIFT) +#define SSC_SET_RANGE_4003 (0x2 << SSC_SET_RANGE_SHIFT) + +/* USB30_PHY_ENABLE */ +#define PHY_ENABLE_RESET_EN BIT(4) + +/* USB30_VBUS_EN */ +#define VBUS_EN_VBUS_EN BIT(1) + +struct rcar_gen3_usb3 { + void __iomem *base; + struct phy *phy; + u32 ssc_range; + bool usb3s_clk; + bool usb_extal; +}; + +static void write_clkset1_for_usb_extal(struct rcar_gen3_usb3 *r, bool reset) +{ + u16 val = CLKSET1_USB30_PLL_MULTI_USB_EXTAL | + CLKSET1_REF_CLKDIV | CLKSET1_PRIVATE_2_1; + + if (reset) + val |= CLKSET1_PHYRESET; + + writew(val, r->base + USB30_CLKSET1); +} + +static void rcar_gen3_phy_usb3_enable_ssc(struct rcar_gen3_usb3 *r) +{ + u16 val = SSC_SET_SSC_EN; + + switch (r->ssc_range) { + case 4980: + val |= SSC_SET_RANGE_4980; + break; + case 4492: + val |= SSC_SET_RANGE_4492; + break; + case 4003: + val |= SSC_SET_RANGE_4003; + break; + default: + dev_err(&r->phy->dev, "%s: unsupported range (%x)\n", __func__, + r->ssc_range); + return; + } + + writew(val, r->base + USB30_SSC_SET); +} + +static void rcar_gen3_phy_usb3_select_usb_extal(struct rcar_gen3_usb3 *r) +{ + write_clkset1_for_usb_extal(r, false); + if (r->ssc_range) + rcar_gen3_phy_usb3_enable_ssc(r); + writew(CLKSET0_PRIVATE | CLKSET0_USB30_FSEL_USB_EXTAL, + r->base + USB30_CLKSET0); + writew(PHY_ENABLE_RESET_EN, r->base + USB30_PHY_ENABLE); + write_clkset1_for_usb_extal(r, true); + usleep_range(10, 20); + write_clkset1_for_usb_extal(r, false); +} + +static int rcar_gen3_phy_usb3_init(struct phy *p) +{ + struct rcar_gen3_usb3 *r = phy_get_drvdata(p); + + dev_vdbg(&r->phy->dev, "%s: enter (%d, %d, %d)\n", __func__, + r->usb3s_clk, r->usb_extal, r->ssc_range); + + if (!r->usb3s_clk && r->usb_extal) + rcar_gen3_phy_usb3_select_usb_extal(r); + + /* Enables VBUS detection anyway */ + writew(VBUS_EN_VBUS_EN, r->base + USB30_VBUS_EN); + + return 0; +} + +static const struct phy_ops rcar_gen3_phy_usb3_ops = { + .init = rcar_gen3_phy_usb3_init, + .owner = THIS_MODULE, +}; + +static const struct of_device_id rcar_gen3_phy_usb3_match_table[] = { + { .compatible = "renesas,rcar-gen3-usb3-phy" }, + { } +}; +MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb3_match_table); + +static int rcar_gen3_phy_usb3_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rcar_gen3_usb3 *r; + struct phy_provider *provider; + struct resource *res; + int ret = 0; + struct clk *clk; + + if (!dev->of_node) { + dev_err(dev, "This driver needs device tree\n"); + return -EINVAL; + } + + r = devm_kzalloc(dev, sizeof(*r), GFP_KERNEL); + if (!r) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + r->base = devm_ioremap_resource(dev, res); + if (IS_ERR(r->base)) + return PTR_ERR(r->base); + + clk = devm_clk_get(dev, "usb3s_clk"); + if (!IS_ERR(clk) && !clk_prepare_enable(clk)) { + r->usb3s_clk = !!clk_get_rate(clk); + clk_disable_unprepare(clk); + } + clk = devm_clk_get(dev, "usb_extal"); + if (!IS_ERR(clk) && !clk_prepare_enable(clk)) { + r->usb_extal = !!clk_get_rate(clk); + clk_disable_unprepare(clk); + } + + if (!r->usb3s_clk && !r->usb_extal) { + dev_err(dev, "This driver needs usb3s_clk and/or usb_extal\n"); + ret = -EINVAL; + goto error; + } + + /* + * devm_phy_create() will call pm_runtime_enable(&phy->dev); + * And then, phy-core will manage runtime pm for this device. + */ + pm_runtime_enable(dev); + + r->phy = devm_phy_create(dev, NULL, &rcar_gen3_phy_usb3_ops); + if (IS_ERR(r->phy)) { + dev_err(dev, "Failed to create USB3 PHY\n"); + ret = PTR_ERR(r->phy); + goto error; + } + + of_property_read_u32(dev->of_node, "renesas,ssc-range", &r->ssc_range); + + platform_set_drvdata(pdev, r); + phy_set_drvdata(r->phy, r); + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(provider)) { + dev_err(dev, "Failed to register PHY provider\n"); + ret = PTR_ERR(provider); + goto error; + } + + return 0; + +error: + pm_runtime_disable(dev); + + return ret; +} + +static int rcar_gen3_phy_usb3_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); + + return 0; +}; + +static struct platform_driver rcar_gen3_phy_usb3_driver = { + .driver = { + .name = "phy_rcar_gen3_usb3", + .of_match_table = rcar_gen3_phy_usb3_match_table, + }, + .probe = rcar_gen3_phy_usb3_probe, + .remove = rcar_gen3_phy_usb3_remove, +}; +module_platform_driver(rcar_gen3_phy_usb3_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Renesas R-Car Gen3 USB 3.0 PHY"); +MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>"); |